AFICO HDSeries Blanket Insulation (HOB)
Transcription
AFICO HDSeries Blanket Insulation (HOB)
Member of I~ )-~ zamilind~I __ USA (oe) ~, A FICO Arabian Fiberglass Insulation Company Ltd. J.Y. of Zamillndustrial IT Owens Corning Corp. AFICO HD Series Blanket Insulation (HOB) DESCRIPTION AFleo HD Series Blanket Insulation is a highly efficient, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin. It is free from coarse fibers and shot due to its mineral composition. FACING AFleo HD Series Blanket Insulation is available in rolls unfaced or one side laminated with factory-applied KRAFT paper, or Aluminum Foil Reinforced Kraft paper (FRK) or other specific vapor barriers. The semi-rigid blankets with densities from 24 to 56 kg/m3, 1.5-3.5 lb/ft' are flexible insulation rolls for application over irregularly shaped surfaces where rigidity properties are desired. APPLICATION AFleo HDSeries Blanket Insulation is intended for use in commercial. Institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for interior, exterior and cavity wall applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems. STANDARD AVAILABLE PRODUCTS Nominal Manufacturing Specifications. Check for availability of other dimensions and densities Density Thickness Thermal Resistance R-Value at 24°( hr·fp·OF /Btu 0.625 3.55 (4) 0.641 3.64 (4) 1.282 -1~316- 7.28 (7) [ 7.47(7) 1.351 I 7.67 (8) 1.429 1.429 8_11 (8) L _1.5_1_5_+ I 1.515 8.60 (9) ----- 8.11 (8) 8.60 (9) -1 AFICO HD Series Blanket Insulation Technical Data Sheet Product Code: HOB Performance & Physical Characteristics Standard Available Working Temperature products Nominal Manufacturing Specifications. Check for availability of other dimensions [ ~H~~ES~ WIDTH Limitations (ASTM (411) Operating temperature -4°C to 250°C At excessive temperatures, limited migration of binder may occur in the insulation in contact with the surface. This is in no way impairs the performance of the insulation. LENGTH l_mm~ __:-~~t__ ~-i'~~-~ i~c~_ Mold Growth (ASTM 0 2020, UL 181) ~-::~-":i'-:::l ~:i;~I::r t 1- 1 .~I l_6~_ 2 1/2-~ l ~ _ 75 __' ;Jo_ ~ 150 600 23 20 610 I 24 I 25 J 31:2 ~~~~ i :: T ~~ L JI _ Corrosiveness (ASTM C 665) 65_ 3 6 Does not breed or sustain mold, fungus, bacteria or rodents ~2 _ .~ _ J1~~~J I _ .J Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition. Alkalinity . Depending on Thickness (r Density pH 9 Nominal Thermal Conductivity surface Burning Characteristics (ASTM E 84, UL 723) W/moK or Btu·in/hr·f!2.°F (ASTM c 5l8) "K" or "A" value at mean temperatures I . Type l~ ] L 140 0 32 10 50 24 75 50 122 75 167 100 212 O( OF O( OF O( OF O( OF O( OF O( OF 041 ~036 '_0 ~--t~ 038~~74 ! 0 035 024 I 160 10034 023 L 18~0 ~33 ~ 200 10032 022 ~ I 240 10031 r 320 I 026 10039 027 0036 025: 02710044 0034 t~o;O 023 10036 0030 r~030 ~_ I 0 34 O~~I 032 0.0551 038 10.061 031 0.051, 0.35 026_ 0 043 ~ 03010 025 -- to 041 028 021 ~00~1 I_~ + 0 03~ 0031 023 10 037 ~5 to 22 10035 0.032 I ~~ 1 0.036 048 i I O~ ~~5 ~ 0.057' OAO 03~] 005~~ ~3~ 0043 030 jO 024 040' 0-: 003710 j 26 0.36: 0047 033 ~~4 ~30 0041 L 0.2410.038 ~.~ J 0~42, I Flame Spread smoke Developed Fuel Contributed FRK 25 lO o ! 1 Specification Compliance HD Series Blanket Insulation complies property requirements of the following specifications: JlFleO 029 0.29 DCl CHN ASTM C 665 ll2l-CPD-BA0l36 Tliermal Resistance "R" Value (ASTM ( 167) Vapor Permeability "R" is a measure of the resistance to heat flow of a material of any given thickness. ("R" = m2.oK/W or hr·fp·oF /Btu) FRK Kraft R = T K where "T" = Thickness and "K" or ""." = Thermal Conductivity Thermal conductance "t;" Value (ASTM C 518, ASTM C 177) "C' It is ability of the product to conduct heat. C = l R when tested to ASTM E 84. Facing OA2 0.0461 0.32 10.051 ~~391 02~ O!~ ~~~3-1-+- 0046 =0~o..:=.C~~_ - r 560 0 038 ~35 ~ 02410037 021 10032 480 110029 020 r 0040 ~0 28 ~0~48 0037 Base glass fiber is non-combustible (ASTM E 96 A) 0.020 PERM l.OO PERM with the --------------------------------------~~~-~~---------- AFICO ~I Arabian Fiberglass Insula lion Company Ltd. J.Y. of Zamil IndustriallJ Owens Corning Corp. --------------------------------------------------~-------------------------------------------------------------------- Performance &' Physical Characteristics Fire Properties SS 476 B.S. 476 B.S 476 B.S. 476 Class '0' PART4 PART5 PART6 PART7 fire rating : Non Combustible : Ignitability : Fire Propagation : Surface Spread of Flame to the building regulations sections E15 Z-(hannels Insulation ---t~It--1'''' r-, --t----"'~-<ZI Gypsum Board --""""""-Poured (oncrete Compressive Strength ---""~- plaster ----Type 120 140 160 180 i PSFat 10 % I Deformation 5 5 5 10 PSF at 25 % . Deformation 10 10 10 15 I 200 240 320 480 560 10 112 16 25 30 15 60 90 110 20 wood Lath Fiber-Reinforced Puncture Resistan(e (ASTM 0 781) Aluminum Tile Foil Reinforced Kraft Paper Laminate (FRK): 25 Units cement Insulation Sound Absorption Coefficient at Frequencies (HZ) Thickness 125 Flexible , , -- 1 L2~_mm ( 1in) I : 50 mm (2in ) I 250 500 1000 2000 NRC 0.69 0.84 0.60 T 0.14 I 0.27 I 0.53 I -1- 0.36 0.09 0.28 0.26 I 0.64 0.80 I 1.12 I 1.18 ---Jlt---.3IIIIiiimi~-H=tI!W --tt+----"'ti:::::..,;L4 , - 0.58 Ii 0.92 0.22 Block Solid Insulation sound Absorption Coefficients (ASTM ( 384) 0.94 0.70 1.10 1 0.70 1.10 1.05 Semi-Rigid I 25 mm ( 1in ) ,-- [50 mm (2in) -+- 0.90 i Insulation cement (avity Block wall ---t¥".-... ....•, ------"'~1"F- Z-(hannels with -----to!. Gypsum Board Installation Recommendation Precast concrete (Exterior) -----I-=l7"..-----I-. AFleo HD Series Blan_ketInsulation can be installed quickly and easily in virtually any type of construction. Between metal studs or Z channels, the insulation can be frictionfit in place while the interior finish is applied. In areas where it will be applied in heights over 2.5m, supplementary support should be provided to hold the insulation in place while the interior finish is applied. When applied to masonry walls, the insulation can be fixed by impaling on pins or other similar attachments and then affixing a locking washer to hold the insulation in place. For ceiling installations, the insulation is simply laid out on top of ceiling panels or other suspension systems. Z-(hannel Furring --d::Ir-iI I Insulation Wire Mesh Reinforced (on crete -t----~ Plaster --~--- Plaster -----~ AFICO HD Series Blanket Insulation Technical Data Sheet Product code: HOB --.-~-.--...------------------------------------------------------------------------------------------------------; MAINTENANCE AFleo PRODUCTS No maintenance is required. AFICO HD Series Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof odorless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions. PRODUCTS CODE Acoustical Ceiling Panels Blanket Insulation HO Series Blanket Insulation ACP BKT Board Insulation Roof Deck Board Insulation BD RI/RD The product will maintain its thermal properties throughout the lifetime of the construction and will not age. AFICO fiberglass is non toxic and not hazardous to health. Cavity wall Insulation Pre-engineered Metal Building Insulation Faced Duct Wrap CWI MBI FDW STORAGE Duct Liner Duct Liner Board Mechanical Board Insulation DL DLB MBD Heavy Density Pipe Insulation Pipe Wrap Insulation Thermal Insulating Wool PI PWI TlW Quiet Liner Quiet Liner Board QL QLB To avoid moisture in the building construction, AFICO insulation products stored outside must be kept dry. We recommend AFICO products to be always stored in covered and dry areas. AFICO is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products. HOB WARRANTY See manufacturer's General Terms and Conditions of Sale. As AFICO and/or OCF has no control over installation design, installation workmanship, accessory materials, or conditions of application, AFICO and/or OCF does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose. Arabian Fiberglass Insulation Company AFICO reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor, For further information or advice on specification of products, contact your local sales office, ;FJ AVAILABILITY Manufactured by Arabian Fiberglass Insulation Company, Ltd. AFICO member of Zamillndustrial Co. ZI, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U,SA Marketed throughout Saudi Arabia, the G.c.c. countries, the Middle East and the Far East. AFICO products are available directly from as well as through a vast and reliable network of local distributors, Special products are manufactured on request. For more information call the insulation ~I professionals: }4JAFICO H.O. & Factory: Tel: Fax: E-mail: PO. Box 1289, Dammam 31431, Saudi Arabia +96638472901/8471519/8472301 +966 3 847 3605 info@afico,com,sa Dammam Office: Tel: Fax: E-mail: PO. Box 1289, Dammam 31431, Saudi Arabia +966 3 847 2901 /847 1519 +966 3 847 3605 [email protected] Riyadh Office: Tel: Fax: E-mail: PO,Box 251, Riyadh 11411, Saudi Arabia +966 1 472 5555 ext. 5980 +966 1 291 0162 info@afico,com.sa jeddah office: Tel: Fax: PO, Box 7504, jeddah 21472,-Saudi Arabia +966 2 670 0020 ext. 134 +9662 671 4566. info@aficocomsa Ernail. Gulf Regional Office: Tel: Fax: E-mail: PO, Box 44493, Deira, Dubai, UAE. +97142941211 +971 4 294 1168 [email protected] Export Office: Tel: Fax: E-mail: PO. Box 90-284, Jdeidet EI Metn, Beirut - Lebanon +961 1 900962 +961 1 900963 info@aficocomsa +WI [email protected] ~ • www.afico.com.sa Authorized Distributor Ov..V c,-ef..f..N pvom!se: eke keCL/ek':J_,so/v..ciOfl ~ ~ ENERGY SAVING ENVIRONMENTALLY FRIENDLY II RECYCLEDMATERIALS II SOLUTION FOR GLOBAL WARMING AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products, Pub No. OS-TDS-(WI Prinled January 2013