2100 PUMP STROKE COUNTER SYSTEM DATA SHEET

2100 PUMP STROKE
COUNTER SYSTEM
DATA SHEET
APPLICATION
The HDI 2100 Pump Stroke Counter is an intrinsically safe, certified, solid-state electronic stroke counter primarily used for monitoring mud pumps.
Found most commonly within the HDI 9000 Choke Console System, the HDI 2100 monitors and displays the total accumulated mud pump strokes
and the stroke rate of up to 4 individual mud pumps simultaneously. The stroke rate for each mud pump can be individually selected for display and
is updated every second. Once installed, there is virtually no maintenance or calibration required. The quartz crystal oscillator provides high precision counts with no drift. The stainless steel case is completely sealed and features stainless steel piezo switches for long life. The entire package is
constructed to operate in harsh environments and high vibration conditions encountered in land and offshore drilling. All HDI Gauges provide safety,
accuracy, reliability, and low maintenance for the user.
FEATURES
• Battery powered
• Field repairable system
• Low battery indicator
OPTIONS
• Externally powered, 12VDC or 24VDC required
(non-certified option)
• Backlight, 12VDC or 24VDC required (non-certified option)
• Monitor 1, 2, 3, or 4 pumps simultaneously
• Micro-switch or proximity sensor
• Dual sensors available for HMI/PLC integration
• Solid state display
• Simple interface for calibration
CERTIFICATIONS
• CSA: Intrinsically Safe Class 1, Division 1, Groups A, B, C and D
• ATEX: optional,
II 1 G, Ex ia IIC T4
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST
2100 PUMP STROKE COUNTER SYSTEM
DATA SHEET
DIMENSIONS
SPECIFICATIONS
• Weight: 5 lbs (as shown gauge display only)
All dimensions given are in inches and [millimeters] unless
• Case Material: Stainless steel
otherwise noted.
• Stroke Rate Range: 15 - 300 spm
• Total Accumulated Strokes Displayed: 65,535 strokes
• Power: HDI E260 Battery Pack, 1 year life span
• Media (Process) Temperature: -40 to 100 celsius
• Display: Liquid crystal display of total strokes and selected
pump spam
• Time Base: Quartz crystal oscillator
HDI
• Viewing Angle: 45 degrees
www.hdigauges.com
• Viewing Distance: 30 feet
POWER
DISPLAY
• Electronics Protection: Gasket seal
CLEAR
• Sensor Housing: Micro-switch or proximity sensor
TTL STROKES
SELECT
LOW BATT
PUMP
1
STROKES / MIN
2
3
4
PUMP SELECT
HDI
www.hdigauges.com
POWER
DISPLAY
CLEAR
TTL STROKES
SELECT
LOW BATT
PUMP
1
STROKES / MIN
2
3
4
PUMP SELECT
Specifications subject to change without notice. HDI Instruments, LLC is a registered ISO 9001:2008 company.
Copyright 2015 HDI Instruments, LLC
HDI Instruments, LLC, 4130 Directors Row, Houston, TX 77092 USA
Phone: 713-688-8555 | Fax: 713-688-2228 | Contact Email: [email protected] | Website: www.hdigauges.com
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST