M100 PRESSURE GAUGE SYSTEM DATA SHEET

M100 PRESSURE
GAUGE SYSTEM
DATA SHEET
APPLICATION
The HDI M100 Pressure Gauge is a solid-state electronic pressure gauge primarily used for standpipe, pumping, and cementing measurement applications. The HDI M100 is used where indication at the point of measurement is a must and the ability to handle high vibration and harsh environments is
crucial. It is easily readable regardless of the lighting conditions. This model offers pressure ranges up to 16,000 psi with accuracy of 0.5% of full scale.
It has been used in the field for over 10 years and is based on HDI’s 25 year field proven platform. All HDI Gauges provide safety, accuracy, reliability,
and low maintenance for the user.
FEATURES
OPTIONS
• Battery powered
• 4-20mA output (additional barrier required)
• Field repairable system
• 0-1 volt output
• Low battery indicator
• Slave, secondary displays available
• 6,000 psi, 10,000 psi, 16,000 psi; kPa or bar available upon request
• Backlight, 12VDC or 24VDC required
• 10 psi resolution
• 2” Male NPT, 2” 1502, 2” 2202, or flanged connections
• 4-20mA or 0-1 volt output available
• Solid state platform; no fluids or moving parts
CERTIFICATIONS
• No certifications available, see HDI 2000P
• Analog bar graph w/ divided scale
• Consistent performance in high vibration environments
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST
M100 PRESSURE GAUGE SYSTEM
DATA SHEET
SPECIFICATIONS
DIMENSIONS
• Weight: 25.1 Lbs (as shown with 1502 Hammer Union)
All dimensions given are in inches and [millimeters] unless
• Case Material: High impact polyurethane
otherwise noted.
• Accuracy: 0.5% of full scale
• Pressure Range: 6,000 psi, 10,000 psi, 16,000 psi resolutions or
kPa/bar equivalents
• Engineering Units: psi, bar, or kPa available
• Resolution: 10 psi increments
• Power: HDI E260 Battery Pack, 1 year life span
• Media (Process) Temperature: -30 to 100 celsius
• Display: 5 digit digital display, circular analog bar graph, low battery
indicator
• Viewing Angle: 45 degrees
• Viewing Distance: 30 feet
• Electronics Protection: Weatherproof sealed and mounted in shock
protection material
• Front Panel Protection: 1/4” thick clear lens
• Sensor Housing: 2” Male NPT, 2” 1502, 2” 2202, flanged
connections
• Sensor Protection: Primary and secondary rubber diaphragms
• Media Pressure Port: Fluids compatible with 410 QDT
stainless steel
Specifications subject to change without notice. HDI Instruments, LLC is a registered ISO 9001:2000 company.
Copyright 2015 HDI Instruments, LLC
HDI Instruments, LLC, 4130 Directors Row, Houston, TX 77092 USA
Phone: 713-688-8555 | Fax: 713-688-2228 | Contact Email: [email protected] | Website: www.hdigauges.com
SAFETY
PRECISION
INNOVATION
WELL CONTROL MONITORING AT ITS FINEST