SIG - Introduction

SIG - Introduction
For over 50 years SIG has manufactured quality products for aero modelers from around the world.
SIG - R/C Airplanes
SIG offers both ARF (Almost Ready to Fly) and BIY (Build It Yourself) radio controlled airplanes. Both include quality hardware, such as
hinges, control horns, etc. Where applicable landing gear, canopy, windows and decals are also included. High quality balsa and plywood
with step-by-step detailed instructions in English and German make construction simple and enjoyable. The BIY airplane kits include full size
building plans. The ARF airplanes are precisely constructed to SIG's specifications and covered with Oracover® polyester film.
SIG - C/L Airplanes
Most of the C/L (Control Line) airplane kits are easy-to-build balsa Profile models. Generally, each kit includes hinges, nylon bell crank, control horn, formed wire pushrods,
decals, and detailed English/German instructions. Where applicable, the canopy and formed wire landing gear are also included.
SIG - F/F Airplanes
The F/F (Free Flight) airplane kits contain high quality balsa, prop, contest rubber motor, covering material, detailed building and flying instructions in English and German. Where applicable, the landing gear and wheels are also included.
Kit Content Order No. SIGRC67ARF
Kit Content Order No. SIGRC76ARFV
SIG Retail Catalog
50 year Anniversary Catalog. Over
150 pages of model airplanes and
accessories. English language only.
SIG product (Order Nos. SIGxxxxx)
that KAVAN doesn't stock can be
special ordered from KAVAN. Prices
shown are not applicable in Europe.
Order No. SIGSC64
82
Kit Content Order No. SIGRC80ARFG
Order No. SIGSC64
www.kavanrc.com
Got a minute? Lunchtime, coffee break, almost any time is flying time with the
easy to transport Li'l Rascal. Extremely stable yet aerobatic and easy to fly even in
winds that might ground other small electric airplanes. Hand assembled using
only the finest balsa and lite-plywood then expertly finished with Oracover®
polyester film in the classic Rascal motif. Li'l Rascal assembles quickly with the
one-piece pre-assembled wing and factory installed motor/gearbox.
Includes: 180-size motor, 2.9:1 GearBox, hardware, decals, and illustrated
instruction manual.
Controls: rudder, elevator and motor
You need the following to complete the Li'l Rascal ARF:
Speed Controller: SlowFlyer 6A w/K1 Gold connector
Order No. 6483
Ni-MH battery pack: 7x 350 w/K1 Gold connector
Order No. 6640.07
Fast Charger: Mini Charger, 4-7 cells
Order No. 6440
Charging cable: with K1 Gold Connector
Order No. 6440.1
Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)
Specifications
Wingspan:
Wing Area:
Length:
Flying Weight:
755 mm
8.6 dm²
520 mm
240 - 270 g
Li'l Rascal Electric ARF, Trans. Blue/White
Li'l Rascal Electric ARF, Trans. Red/White
Order No. SIGRC88ARFB
Order No. SIGRC88ARFR
Order No. SIGRC88ARFB
Includes
Rascal Electric ARF
SIG - R/C Electric Airplanes
Li'l Rascal Electric ARF
Clean lines, classic looks, easy flying yet responsive. The included geared 400-size
motor gives outstanding lift and normal flight duration near ten minutes. Find a
thermal, and sit back for a long, leisurely flight. Turn it up a little, and the Rascal
ARF will shake your soul with loops and rolls… even inverted flight. Hand
assembled using only the finest balsa and lite-plywood then expertly finished in a
two-tone color scheme with Oracover® polyester film.
Includes: SIG 20A Speed Control presoldered to the motor, Gearbox (Order No.
MXACC347), wheels, decals, hardware and illustrated instruction manual.
Controls: rudder, elevator and motor
Order No. SIGRC80ARFV
Includes
www.kavanrc.com
You need the following to complete the Rascal ARF:
Ni-Cd battery pack: 7x 600AE w/K2 Gold connector
Order No. 6439.07
Fast Charger: Mini Charger, 4-7 cells
Order No. 6440
Charging cable: with K2 Gold Connector
Order No. 6323
Prop: 8x6 APC Thin Electric Propeller
Order No. AP.308060
Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)
Specifications
Wingspan:
Length:
Wing Area:
Flying Weight:
Rascal Electric ARF Trans. Green/White
Rascal Electric ARF Trans. Violet/White
1245 mm
825.5 mm
20.9 dm²
623 - 680 g
SIGRC80ARFG
SIGRC80ARFV
83
SIG - R/C Electric Airplanes
SIG ParkFlyers Electric ARF
All three planes are constructed of lightweight yet strong, injection foam then factory
painted. The two one-piece airfoiled wings are factory finished and attach to the
fuselage using a strong cabane structure. Flying these beauties couldn't be easier. In
gentle breezes, these semi scale WWI veterans take to the sky using only about 6 m
of runway. Cruise airspeed is just 8-11 kph, so there's time to react in small park
settings or indoors.
Each ARF Includes: 180-size motor, 4.4:1 GearBox, prop, cowling, wheels, hardware,
decals, and illustrated instruction manual.
Controls: rudder, elevator and motor
You need the following to complete each airplane:
Speed Controller: SlowFlyer 5A w/K1 Gold connector
Ni-MH battery pack: 6x 650 mAh w/K1 Gold connector
Ni-MH battery pack: 6x 750 mAh w/K1 Gold connector
Fast charger: Mini Charger, 4-7 cells
Charging cable: K1 Gold connector
Radio control set: 3 channel, Micro receiver, 2 micro servos
Order No. 6483
Order No. 6641.06 or
Order No. 6643.06
Order No. 6440
Order No. 6440.1
(9 g or less)
Specifications
Wingspan:
Length:
Wing Area:
Flying Weight:
Wing Loading:
Origin:
Curtiss Jenny
822 mm
648 mm
18.4 dm²
295 - 310 g
16 - 16.9 g/dm²
America
Bristol Scout
782 mm
648 mm
19.5 dm²
305 - 320 g
15.6 - 16.4 g/dm²
England
Fokker D-VII
830 mm
602 mm
17.6 dm²
305 - 310 g
17.3 - 17.6 g/dm²
Germany
Order No.
SIGRC93ARF
SIGRC94ARF
SIGRC95ARF
Order No. SIGRC93ARF
Order No. SIGRC94ARF
Order No. SIGRC95ARF
84
Includes
www.kavanrc.com
Travel back to yesteryear when courageous young men created
magnificent flying machines to break the bonds of mother
earth and soar with the eagles. Designed to fly indoors or in
no-wind conditions. Laser-cut parts for outstanding accuracy
and ease of assembly.
1909 Antoinette
Check out the delicate wing foil, the unique rigging and scale
like pilot with his scarf flapping in the breeze.
1909 Demoiselle
Check out the operational, fully articulated flying stab, the
replica engines, and the early aviator pilot figure.
Order No. SIGRC90
Each kit Includes: Lite-Span covering material, simulated
rigging, pull-pull lines, wheels, tires, hardware and illustrated
instruction manual.
Controls: rudder, elevator and motor
You need the following to complete each airplane:
Order No. SIGRC91
SIG Indoor Motor/Gearbox Drive Set
Speed Controller: SlowFlyer 5A
Ni-MH battery pack: 7x 650 mAh
Fast charger: Mini Charger, 4-7 cells
Charging cable: K1 Gold connector
Balsaloc, paints and glues
Radio control set:
3 channel, Micro receiver, 2 micro servos
(9 g or less)
Specifications
1909 Antoinette
1909 Demoiselle
Wingspan:
Fuse Length:
Wing Area:
Weight*:
*Weight w/o the 7
1270 mm
1194 mm
32.9 dm²
210 - 230 g
cell Ni-Cd pack
1130 mm
889 mm
32.9 dm²
185 - 200 g
Order No. SIGRC91
Order No. SIGRC90
Order No. SIGEPU001
Order No. 6483
Order No. 6641.07
Order No. 6440
Order No. 6440.1
SIG - R/C Electric Airplanes
R/C Indoor "Pioneers of Flight" BIY
SIG Indoor Motor/Gearbox Drive Set
Designed for 1909 Antoinette, 1909 Demoiselle and similar
indoor R/C airplanes. Includes a micro motor, dual balling
gearbox, spinner and 10x4.75 prop.
Order No. SIGEPU001
Order No. SIGEPU001
www.kavanrc.com
85
HERR ENGINEERING
HERR ENGINEERING R/C Model Airplanes BIY
Herr's 1/2A (.049) powered models assemble
quickly, are convenient to transport, and provide
outstanding performance with minimal fuel consumption. Designed for glow and/or electric power,
mini servos recommended. All airplanes feature
laser Accu-cut™ hand-select SIG AAA grade balsa.
3-D CAD engineered for a precise parts fit. Includes
full size computer drawn plans, quality hardware
such as clear canopy, molded plastic cowl, pre-bent
landing gears, colorful decals, and a complete step
by step English/German instruction manual. Mini
Floats fit HRR505, HRR508 and similar airplanes.
Order No. HRR501
Order No. HRR502
Order No. HRR503
Order No. HRR506
Order No. HRR507
Order No. HRR508
Order No. HRR504
Order No. HRR505
Order No. HRR509
Order No. HRR510
(Mini Floats only)
Name
AT-6 Texan
Aqua Star
Star Cruiser Trainer
Piper Cherokee
Piper J-3 Cub
P-51 Mustang
Pitts Special
Cloud Ranger
Cessna 180 Skywagon
Mini Floats
Wing Span
Weight Approx.
Engine / Motor (required)
914 mm
1029 mm
1067 mm
1067 mm
1219 mm
1067 mm
762 mm
1067 mm
1105 mm
603 mm long
540 g
540 g
480 g
540 g
570 g
620 g
740 g
470 - 570 g
600 g
140 g
.049 - .061 in3 (0.8 - 1.0 cm3)
.049 - .061 in3 (0.8 - 1.0 cm3)
.049 - .061 in3 (0.8 - 1.0 cm3)
.049 - .061 in3 (0.8 - 1.0 cm3)
.049 - .061 in3 (0.8 - 1.0 cm3)
.049 - .074 in3 (0.8 - 1.21 cm3)
.074 - .15 in3 (1.2 - 2.45 cm3)
.049 - .061 in3 (0.8 - 1.0 cm3) / Speed 400
.049 - .061 in3 (0.8 - 1.0 cm3)
.061 - .15 in3 (1.0 - 2.45 cm3)
Radio (required)
2
2
2
2
2
or 3 Channel
or 3 Channel
or 3 Channel
or 3 Channel
or 3 Channel
4 Channel
4 Channel
3 or 4 Channel
3 Channel
N/A
Servos (req.)
Order No.
Std. or Mini
Std. or Mini
Std. or Mini
Std. or Mini
Std. or Mini
Std. or Mini
Mini
Std. or Mini
Std. or Mini
N/A
HRR501
HRR502
HRR503
HRR504
HRR505
HRR506
HRR507
HRR508
HRR510
HRR509
HERR ENGINEERING Breezy Day ParkFlyers BIY
Herr's Breezy Day ParkFlyers look and fly like real airplanes
providing a level of performance allowing them to fly long
after the wind has grounded many other ParkFlyers. All
airplanes feature laser Accu-cut™ hand-select SIG AAA
grade balsa. 3-D CAD engineered for a precise parts fit.
Includes full size computer drawn plans, quality hardware
such as propeller, landing gear wire & wheels (except RallyXP), colorful decals, and a complete step by step English/
German instruction manual.
Name
Piper J-3 Cub
Rally-XP
Mini Sport
Air Boss
86
Wing Span
895 mm
1226 mm
908 mm
908 mm
Weight Approx.
320
320
320
320
g
g
g
g
Order No. HRR302
Motor (required)
Swift
Swift
Swift
Swift
280
280
280
280
(Order
(Order
(Order
(Order
No.
No.
No.
No.
6496)
6496)
6496)
6496)
Order No. HRR303
Order No. HRR304
Speed Controller (required)
5A
5A
5A
5A
SlowFly
SlowFly
SlowFly
SlowFly
(Order
(Order
(Order
(Order
No.
No.
No.
No.
6483)
6483)
6483)
6483)
Battery (required)
8x
8x
8x
8x
650
650
650
650
mAh
mAh
mAh
mAh
(Order
(Order
(Order
(Order
No.
No.
No.
No.
6641.08)
6641.08)
6641.08)
6641.08)
Order No. HRR305
Servos (req.)
2x
2x
2x
2x
Micro
Micro
Micro
Micro
Order No.
HRR302
HRR303
HRR304
HRR305
www.kavanrc.com
Although designed as rubber powered free flight models some
people choose not to fly these but instead build them as a beautiful covered or uncovered display model. With the increased
popularity of Slow and ParkFlyer airplanes experienced modelers
have converted these to small flying radio controlled aircraft.
Instructions are not included for converting these airplanes to
radio controlled aircraft. But it is a natural project for the experienced modeler because the stable flight characteristics associated
to free flight models make good Slow and ParkFlyer aircraft.
Typically only rudder, elevator and motor control are added using
micro servos and receiver. Use 280-size motors geared or direct up
to 400-size direct for the Piper J-3 Cub.
Scout Wing Span: 762 mm
Order No. HRR101
Fairchild Wing Span: 762 mm
Order No. HRR102
Piper J-3 Cub Wing Span: 902 mm
Order No. HRR103
Ryan ST Wing Span: 762 mm
Order No. HRR104
Fokker D-VII Wing Span: 610 mm
Order No. HRR105
P-51 Mustang Wing Span: 762 mm
Order No. HRR106
Gee Bee R2 Wing Span: 635 mm
Order No. HRR107
Beech Bonanza Wing Span: 762 mm
Order No. HRR108
Example: Scout (Order No. HRR101)
Motor: Swift 280 (Order No. 6496)
Propeller: APC 5.7 x 3" (Order No. AP.405730)
Battery: Quantum (Order No. 6641.08)
Speed Controller: KAVAN 5A SlowFlyer (Order No. 6483)
2x 5-9g Micro-Servos e.g. Hitec HS-55
Micro Receiver e.g. Multiplex 4/5 Pico
Each kit features:
!
Laser Accu-cut™ hand-select SIG AAA grade balsa.
!
3-D CAD engineered for a precise parts fit.
!
Quality hardware pack including
!
contest rubber,
!
plastic propeller,
!
lightweight colored tissue,
!
lightweight wheels,
!
waterslide decals.
!
Accurate computer drawn plans.
!
Step by Step Building Instructions (English/German).
www.kavanrc.com
HERR ENGINEERING
Free Flight Rubber Powered Airplanes BIY
87
HERR ENGINEERING
88
Free Flight Rubber Powered Airplanes BIY
Super Cub Wing Span: 762 mm
Order No. HRR109
Cessna Bird Dog Wing Span: 762 mm
Order No. HRR110
Pitts Special Wing Span: 610 mm
Order No. HRR111
Helio Courier Wing Span: 762 mm
Order No. HRR112
F4U-1 Corsair Wing Span: 762 mm
Order No. HRR113
AT-6 Texan Wing Span: 762 mm
Order No. HRR114
Stearman PT-17 Wing Span: 711 mm
Order No. HRR116
Piper J-3 Cub Wing Span: 457 mm
Order No. HRR201
Taylorcraft Wing Span: 457 mm
Order No. HRR202
Aeronca Champ Wing Span: 457 mm
Order No. HRR203
Piper Tri Pacer Wing Span: 457 mm
Order No. HRR204
Cessna 180 Wing Span: 457 mm
Order No. HRR205
www.kavanrc.com
SIG CUB F/F BIY
MINI-MAXER F/F BIY
Designed by George Perryman, veteran free flight designer and
competitor. Add a pop-up tail de-thermalizer (not included with
kit) to keep this little airplane from going cloud hopping!
Wingspan:
Length:
584 mm
660 mm
Order No. SIGFF24
AMA CUB F/F BIY
Used since 1968 in beginner's promotions around the world. Very easy to
build, yet can turn in some amazing flights. Wing and tail surfaces are
constructed on pre-printed covering material, everything is included except the
glue. When ordered in lots of 1,000 or more, the wing covering material can be
pre-print with your own advertising message.
Wingspan:
318 mm
Order No. SIGFF5
www.kavanrc.com
FAI flyer Larry Conover designed this to be a simple, but capable,
"advanced trainer" for modelers learning the ins and outs of trimming
a free flight model. Capable of long high flights; limited only by the
developing flier's knowledge.
Wingspan:
Length:
Weight:
597 mm
578 mm
28 g
Order No. SIGFF1
SIG - F/F (Free Flight) Airplanes
See SIG Introduction, page 82 or www.sigmfg.com for more details.
AMA RACER F/F BIY
Similar to the legendary AMA CUB, only bigger and with an adjustable
wing position for more exact flight trimming. Very easy to build, yet turns
in amazing flights. Wing and tail surfaces are constructed on pre-printed
covering material, everything is included except the glue.
Wingspan:
457 mm
Order No. SIGFF4
89
SIG - R/C Airplanes
Riser Sailplane BIY
Designed for the novice and seasoned sport flyer. The SIG Riser
features a strong, lightweight, easy to build conventional balsa
construction airframe. Flat bottom airfoil for great lift. Room for
standard size servos, build as either two channel (rudder/elevator) or
three channel (rudder/elevator/spoiler). Includes complete hardware
package. Launch using a standard high start, winch or optional SIG
Power Pod with (.049) 0.8 cm³ glow engine. Convert to electric flight
with Order No. SIGKAV052.
Order No. SIGRC52
Specifications
Wingspan:
Wing Area:
Wing Loading:
Length:
Flying Weight:
Radio Required:
2000 mm
40 dm2
18 - 20 g/ dm2
1054 mm
680 - 800 g
2 Channels, 2 Servos or
3 Channels, 3 Servos
Riser Sailplane BIY
Order No. SIGRC52
E-Flight Conversion kit
Order No. SIGKAV052
Includes: Bulkheads, screws, detailed instruction and plan.
Riser 100 Sailplane BIY
The SIG Riser 100 is an excellent choice for the newcomer
wanting to get started in R/C soaring, or for the seasoned
glider pilot desiring a relaxing, easy to build floater. The
modified Eppler 205 airfoil and large wing area gives you the
ability to fly in nearly any weather. Providing great hang time
in light lift conditions, it also has respectable penetration
when the wind comes up. Easy to transport two piece wing.
Conventional balsa construction with Lite Plywood fuselage.
Includes complete hardware package.
Order No. SIGRC62
90
Specifications
Wingspan:
2540 mm
Wing Area:
64.5 dm2
Wing Loading:
18 - 20 g/ dm2
Fuselage Length:
1308 mm
Flying Weight:
1275 - 1389 g
Radio Required: 2 Channels, 2 Servos or 3 Channels, 3 Servos
Riser 100 Sailplane BIY
Order No. SIGRC62
E-Flight Conversion kit
Order No. SIGKAV062
Includes: Bulkheads, screws, detailed instruction and plan.
www.kavanrc.com
Glassair 400, a lightweight 2-meter class sailplane to ride thermals all day long. Power with a
0.8 - 1.0 cm³ glow engine or 400-size electric motor. Economically priced, fiberglass fuselage,
90% preassembled, builds fast with the fully illustrated instruction manual to guide you
through either glow or electric operation. English only Instruction.
Specifications
Wingspan:
Wing Area:
Length:
Flying Weight:
Radio Required:
Engine Required:
1850 mm
29.3 dm²
899 mm
625 g (Glow)
2-3 Channels, Standard Servos
(.049-.061) 0.8 - 1.0 cm³ 2-Stroke Glow;
400-size motor Electric
Glassair 400 Glider ARF, Blue
Glassair 400 Glider ARF, Red
Order No. GLS400B
Order No. GLS400R
Order No. GLS400B
SIG - R/C Airplanes
Glassair 400 Glider ARF
SeaLane FloatPlane BIY
Taxi gently away from the dock and head for open water. Increase power and
watch the water spray behind you as the hull lifts smoothly off the water.
Gentle, graceful, responsively solid. Then turn-it-on; loops, rolls, even inverted
flight! You would never think this was a floatplane. Settle back for a smooth
touchdown into the sunset and taxi back to the dock with solid, positive
control, even in crosswinds.
The SeaLane features a one-piece, removable wing, allowing easy access to all
your radio gear. The high mounted forward facing engine pylon keeps your
engine high and dry. While the SeaLane is no landlubber, SIG includes optional
instructions showing the installation of a fixed gear and tail dragger landing
gear. Simply add the main and tail wheel assemblies (not included), detach the
tip floats and burn up the skies at your local flying field. The SeaLane is the
perfect choice for your first-time seaplane.
SeaLane builds quickly with precision laser cut wood parts; full size rolled plans
and illustrated construction manual leaving nothing to the imagination, even for
the novice builder. Includes quality hardware package.
Order No. SIGRC85
www.kavanrc.com
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
1537 mm
43.5 dm²
1610 mm
2720 - 3175 g
4 Channels, 4 Standard Servos
(.40-.46) 6.5 - 7.5 cm³ 2-Stroke Glow;
(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow
SeaLane FloatPlane BIY
Order No. SIGRC85
91
SIG - R/C Airplanes
Kadet LT-25 BIY
For decades, the SIG Kadet's have been the R/C trainers of choice at many club
fields. The newest in the Kadet series, LT-25 is a downsized version of the
popular SIG Kadet LT-40. The LT-25 inherits the same gentle flying
characteristics and light wing loading which allows it to fly slow enough to
give the student pilot time to think and react. It has the same "hands off"
stability on all axes. If the student pilot gets disorientated, simply let go of the
"sticks" and the LT-25 will recover and return to level flight. For simplicity and
minimium flying weight, the LT-25 has a tail dragger landing gear. With a widestance main gear and shallow angle of attack on the ground, the LT-25 takes off
and lands just as easily as most tricycle gear airplanes.
Order No. SIGRC74
LT-25 builds quickly with precision laser cut wood parts. Includes quality
hardware package with aluminum main landing gear.
Specifications
Wingspan:
Wing Area:
Weight:
Radio Required:
Engine Required:
1600 mm
46.7 dm²
1810 - 1930 g
4 Channels
(.25-.32) 4 - 5.3 cm³ 2-Stroke Glow;
(.20-.26) 3.3 - 4 cm³ 4-Stroke Glow
Kadet LT-25 BIY
Order No. SIGRC74
Kadet LT-40 (BIY and ARF)
Thousands of fledgling pilots have earned their wings learning to fly with the Kadet LT-40.
With its large wing area and light weight, the Kadet LT-40 ARF flies slow, giving the
fledgling pilot ample time to think and react to what the airplane is doing. BIY version
features laser cut parts and simple to build Lite Ply fuselage. Includes, decal, hardware,
spinner, wheels and fuel tank.
Specifications for BIY
Wingspan:
Wing Area:
Wing Loading:
Fuselage Length:
Airfoil:
Flying Weight:
Radio Required:
Engine Required:
Kadet LT-40 BIY
Order No. SIGRC67
Specifications for ARF
Engine Required:
Kadet LT-40 ARF
92
1778 mm
58.1 dm²
43 - 47 g/ dm²
1422 mm
Clark Y
2500 - 2720 g
4 Channels, 4 Servos
(.30-.40) 4.9 - 6.5 cm³ 2-Stroke Glow
(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow
Order No. SIGRC67
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow
(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow
Order No. SIGRC67ARF
www.kavanrc.com
First attempts at R/C flying should be with an inherently stable model
that flies slow enough to give the student pilot time to think and react.
The SIG Kadet Senior is the result of over 50 years of experience
helping beginner modelers do just that. With a high wing, generous
wing area and light wing loading, the SIG Kadet Senior also makes a
great flying platform for camera, simulated bomb drops, banner or
glider towing.
Specifications for BIY
Wingspan:
1981 mm
Wing Area:
74.2 dm²
Wing Loading:
37 g/ dm²
Flying Weight:
2720 g
Radio Required:
3 Channels, 3 Servos
Engine Required:
(.29-.40) 4.8 - 6.5 cm³ 2-Stroke Glow;
(.35-.45) 5.7 - 7.4 cm³ 4-Stroke Glow
Kadet Senior BIY
Order No. SIGRC58
SIG - R/C Airplanes
Kadet Senior (BIY and ARF)
Order No. SIGRC58ARFB
Specifications for ARF
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
2032 mm
76.1 dm²
1314 mm
2720 - 2950 g
4 Channels, 5 Servos
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;
(.40-.50) 6.5 - 8.7 cm³ 4-Stroke Glow
Kadet Senior ARF, Trans. Blue Order No. SIGRC58ARFB
Kadet Senior ARF, Trans. Red Order No. SIGRC58ARFR
Kadet Seniorita BIY
This compact version of the legendary Kadet Senior is designed for
modelers with a small car or workshop. The Kadet Seniorita features
the same super light wing loading and forgiving flight characteristics
of the larger Kadet Senior, only in a smaller package. Conventional
balsa and plywood construction. Quality hardware package including
steerable nose gear, engine mount, etc.
Specifications
Order No. SIGRC60
www.kavanrc.com
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
1600 mm
48 dm²
1700 g
1270 mm
3 Channels (elevator, rudder, throttle)
(.15-.25) 2.5 - 4 cm³ 2-Stroke Glow;
(.21-.35) 3.4 - 5.7 cm³ 4-Stroke Glow
Kadet Seniorita BIY
Order No. SIGRC60
93
SIG - R/C Airplanes
Four Star 40 (BIY and ARF)
You've done great with your first trainer. Now is the time to step up
and start having some real fun. SIG's Four Star 40 has been the
"second airplane" of choice for thousands of modelers since its
introduction in 1989. With it's low semi-symmetrical wing, light wing
loading, the Four Star 40 takes you to the next level, with all the
free-style aerobatics and whoop-dee-doos your thumbs can conjure
up. BIY version features laser cut parts and simple to build liteplywood fuselage. Like all SIG BIY and ARF airplanes only quality
balsa and plywoods are used. Four Star 40 ARF is hand covered
using Oracover® film. Complete hardware package includes decals,
aluminum landing gear, etc.
Specifications
Wingspan:
Wing Area:
Wing Loading:
Length:
Flying Weight:
Radio Required:
Engine Required:
1518 mm
39 dm²
55 g/ dm²
1194 mm
2150 g
4 Channels, 4 Servos
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;
(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow
Four Star 40 BIY
Four Star 40 ARF, Red
Four Star 40 ARF, Yellow
Order No. SIGRC44
Order No. SIGRC44ARFR
Order No. SIGRC44ARFY
Order No. SIGRC44
Order No. SIGRC44ARFY
94
www.kavanrc.com
A simple blend of classic lines, ultra-simple construction and outstanding
flight performance has been the hallmark of the Four Star series. The Four
Star series are easy to fly and make an ideal choice for your first low wing
airplane. Intermediate and advanced flyers will love the maneuverability
and smooth handling of the Four Star 60. BIY version features laser cut
parts and simple to build Lite Ply fuselage. Includes, decals, aluminum
landing gear, hardware, pushrods, etc.
Order No. SIGRC73ARFY
Specifications
Wingspan:
Wing Area:
Wing Loading:
Fuselage Length:
Flying Weight:
Engine Required:
1803 mm
60.3 dm²
53.5 - 61.1 g/ dm²
1447 mm
3200 - 3600 g
(.60-.75) 10.0 - 12.3 cm³ 2-Stroke Glow
(.65-.90) 10.7 - 14.7 cm³ 4-Stroke Glow
Radio Required Four Star 60 BIY: 4 Channels, 4 Servos
Radio Required Four Star 60 ARF: 4 Channels, 5 Servos
Four Star 60 BIY
Four Star 60 ARF, Red
Four Star 60 ARF, Yellow
SIG - R/C Airplanes
Four Star 60 (BIY and ARF)
Order No. SIGRC73
Order No. SIGRC73ARFR
Order No. SIGRC73ARFY
Four Star 120 BIY
Just like the Four Star 40 and the Four Star 60, the Four Star 120 has a near
perfect blend of simple construction, classic looks, and outstanding flight
performance. Easy to build; lite-plywood fuselage construction, fast-building wing,
pre-shaped balsa leading edges. With wing loading like a trainer, the Four Star 120
is easy to fly yet will perform all the free-style aerobatics your thumbs can keep up
with. The impressive size of the Four Star 120 (IMAA legal) makes for smooth
aerobatics and ultra-slow landings. Quality hardware pack includes landing gear,
canopy, engine mount, pushrods, hinges, decal sheet, etc.
Specifications
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
Four Star 120 BIY
www.kavanrc.com
2057 mm
77.7 dm²
4760 - 5440 g
1651 mm
4 Channels, 5 Servos
(2 aileron, 1 elevator, 1 rudder, 1 throttle)
(.90-1.20) 15 - 20 cm³ 2-Stroke Glow;
(1.20-1.60) 20 - 26 cm³ 4-Stroke Glow
Order No. SIGRC65
Order No. SIGRC65
95
SIG - R/C Airplanes
Hog-Bipe BIY
Since 1957, thousands of modelers have been delighted with the slow
flying, yet aerobatic flight performance of the original SIG Astro-Hog. As
the old saying goes, "Nothing flies like a Hog!". Now you can have the
same easy flying aerobatic performance in a sport biplane design- the SIG
Hog-Bipe. The Hog-Bipe performs every maneuver in the book, yet flies
slow enough to let you enjoy it. Wing: fully-symmetrical, NACA airfoil. Fast
building with laser cut parts and simple to build lite-plywood fuselage.
Quality hardware pack includes aluminum landing gear and cabane struts,
molded ABS headrest and wheel pants, engine mount, pushrods, etc.
Specifications
Order No. SIGRC69
Top Wingspan:
Bottom Wingspan:
Total Wing Area:
Weight:
Radio Required:
Engine Required:
1384 mm
1315 mm
62.3 dm²
3175 - 3630 g
4 Channels
(.60-.65) 9.8 - 10.7 cm³ 2-Stroke Glow;
(.65-.90) 10.7 - 15 cm³ 4-Stroke Glow
Hog-Bipe BIY
Order No. SIGRC69
Smith Miniplane BIY
Historically, the full-scale Smith Miniplane is one of the designs that helped start the
modern homebuilding era. Originally designed and built in 1957 by Frank Smith of
Fullerton, California, the Smith Miniplane was an early example of engineering with
the amateur homebuilder and weekend pilot in mind. It could be constructed with
tools easily within reach of the average craftsman. Powered by a 100 hp Lycoming,
the Smith Miniplane cruised at 190 kph and climbed at a fantastic 760 m per minute.
In 1974, Glen Sigafoose, then President of Sig Mfg. Co., acquired a complete Smith
Miniplane to use for aerobatic practice. Glen's beautiful red, white, and black aircraft
was the inspiration for this semi-scale model.
Like the full-scale model, it's smooth and stable, yet provides plenty of excitement in
the aerobatic department. An outstanding roll rate makes for dizzying snap rolls.
Conventional balsa and plywood construction, semi-symmetrical wing. Includes
molded ABS cowling, headrest and wheel pants, factory formed landing gear and
tailwheel wires, authentic decals and quality hardware pack.
Specifications
96
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
1120 mm
42 dm²
2380 g
1040 mm
4 Channels
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow
Smith Miniplane BIY
Order No. SIGRC38
Order No. SIGRC38
www.kavanrc.com
SIG - R/C Airplanes
Wonder BIY
If you like sweaty palms, a racing heart and unbelievable fast
flying, then the SIG Wonder is the airplane for you. The SIG
Wonder is best described as a very fast, go-where-you-point-it,
turn-it-quick-or-it'll-be-gone plane designed for hot-fingered R/C
pilots. Landings are easy due to the thick symmetrical airfoil
and light wing loading. Easy to build balsa and plywood
construction.
Specifications
Wingspan:
Wing Area:
Wing Loading:
Flying Weight:
Radio Required:
Engine Required:
952 mm
21.8 dm2
34 - 49 g/ dm2
740 - 1070 g
2 Channels, 2 Servos or
3 Channels, 3 Servos
(.09-.19) 1.5 to 3.0 cm³ 2-Stroke Glow
Wonder BIY
Order No. SIGRC66
Order No. SIGRC66
Somethin' Extra (BIY and ARF)
The Somethin' Extra has it all: good looks, incredible performance and unbelievably easy to
build. It's thick airfoil and very light wing loading allows almost unlimited flying maneuvers,
while these same features, insure stable, slow speed handling. The Somethin' Extra uses a
unique removable wing feature, which allows for easy building, transport and storage. BIY is
laser cut balsa and plywood construction. Includes aluminum landing gear, hardware, and
plastic wheel pants.
Order No. SIGRC76ARFV
Common Specifications
Wingspan:
Wing Area:
Wing Loading:
Fuselage Length:
Radio Required:
Engine Required:
1308 mm
39.6 dm²
48 - 54 g/dm²
1225 mm
4 Channels, 5 Servos
(.40-.46) 6.5 -7.5 cm³ 2-Stroke Glow
(.56-.65) 9.2 -10.7 cm³ 4-Stroke Glow
Somethin‘ Extra ARF
Includes factory painted Fiberglass Wheel Pants
Somethin' Extra BIY
Somethin' Extra ARF, Red/White
Somethin' Extra ARF, Violet/White
www.kavanrc.com
Order No. SIGRC76
Order No. SIGRC76ARFR
Order No. SIGRC76ARFV
97
SIG - R/C Airplanes
Rascal BIY
Now and then an airplane comes along with such classic graceful lines that it has an almost
magical effect on pilots. A perfect combination of form and function. The SIG Rascal is that kind
of design, right out of the early days of full-scale and model aviation.
Easy to build, laser cut parts, conventional balsa and plywood construction. Power with either a
geared 400-size motor or a 0.8 to 1.15 cm³ glow engine. The plans and instruction manual cover
both installations in detail. Includes hardware, molded wheel pants, color instrument panel and
decals.
Rascal is also available in ARF versions; for glow power order Rascal Nitro ARF, for electric power
order Rascal Electric ARF.
Accessories required for electric power, SIGRC80:
Williams Bros. Golden Age Wheels, Ø 47 mm
Swift 400, 6V Motor with K2 Gold connector
400 Motor Mount
400 Gearbox w/3 Pinions & Dual ball bearings
Speed Controller: KAVAN 11A w/K2 Gold connectors
Ni-Cd pack: 7x 600AE mAh w/K2 Gold connector
8x6 APC Thin Electric Propeller
Order
Order
Order
Order
Order
Order
Order
No.
No.
No.
No.
No.
No.
No.
WBR15000
6597
MXACC314
MXACC347
6485
6439.07
AP.308060
Order No. SIGRC80ARFG
Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)
Specifications
Wingspan:
Wing Area:
Flying Weight:
Engine Required:
Rascal BIY
1245 mm
20.9 dm²
(Glow) 510 - 570 g; (Electric) 623 - 680 g
(.049-.07) 0.8 - 1.15 cm³ Glow;
400-size Motor w/Gearbox Electric
Order No. SIGRC80
Rascal Nitro ARF
For the ultimate "golden age" experience with a 1 cm³ glow engine- SIG Rascal
Nitro ARF. Hand assembled from the finest balsa and plywood and then
expertly covered using Oracover® polyester film in a classic two-color trim
scheme of white with either transparent blue or red. Includes all major
hardware such as fuel tank, motor mount, pre-painted matching wheel pants,
etc.
Specifications
Wingspan:
Wing Area:
Length:
Flying Weight:
Radio Required:
Order No. SIGRC86ARFR
98
1245 mm
20.9 dm²
82.5 mm
18-20 oz (510 - 570 g)
3 Channels, 3 Servos
Engine Recommended:
Norvel AME .061 (1.0 cm³) R/C Glow
Norvel AME .061 R/C Engine
Rascal Nitro ARF, Trans. Blue
Rascal Nitro ARF, Trans. Red
Order No. NVLA6R
Order No. SIGRC86ARFB
Order No. SIGRC86ARFR
www.kavanrc.com
Same great design as the Rascal but the larger Rascal Forty ARF adds
full span ailerons for outstanding aerobatics. Classic looks with the
distinctive elliptical wing and tail group. The two-piece wing makes for
easy transport. Includes complete hardware package with fuel tank,
wheels, spinner, aluminum landing gear, painted fiberglass wheel pants,
etc.
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
Rascal Forty ARF, Trans. Blue
Rascal Forty ARF, Trans. Red
1841 mm
47 dm²
1314 mm
2300 - 2500 g
4 Channels, 5 Servos
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;
(.40-.56) 6.5 - 9.0 cm³ 4-Stroke Glow
Order No. SIGRC83ARFR
Order No. SIGRC83ARFB
Order No. SIGRC83ARFR
SIG - R/C Airplanes
Rascal Forty ARF
Rascal 110 ARF
Like the others, Rascal 110 ARF is easy to fly, yet responsive.
The scale-like lines are decidedly from the "golden age" of
aviation, making the airplane look so realistic it could easily be
mistaken for a full size airplane from the 1930's. Two-piece wing
and functional wing struts for easy transport. IMAA legal.
Includes complete hardware, fiberglass cowl, matching wheel
pants, aluminum landing gear and scale-like tailwheel assembly.
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Wing Loading:
Radio Required:
Engine Required:
2794 mm
98.2 dm²
1924 mm
5000 - 6000 g
51 - 60 g/ dm²
4 channel with 5 servos
(1.2-1.5) 19.7 - 24.6 cm³ 2-Stroke,
(1.2-1.8) 19.7 - 29.5 cm³ 4-Stroke;
(1.2-1.5) 22 - 25 cm³ Gasoline
Rascal 110 ARF, Trans. Blue
Rascal 110 ARF, Trans. Red
Order No. SIGRC84ARFB
Order No. SIGRC84ARFR
Order No. SIGRC84ARFB
www.kavanrc.com
99
SIG - R/C Airplanes
Sun Dancer ARF
The ability to reach for the skies and dance with the sun has long been the
venue of highly aerobatic biplanes. No ordinary pair of wings, the SIG Sun
Dancer is craftsman-built using only hand selected balsa and plywood. The
finish is pure beauty with a dazzling trim scheme of orange, red and yellow
Oracover® film sure to brighten up even the darkest day. Sun Dancer is more
than a pretty face. It's pure aerobatic muscle. With a 52 cm³ gas engine and a
competition radio in control, the Sun Dancer could re-write the book on
aerobatics. Rock solid knife-edge, loops big and small, and snap rolls all the
way to eternity. Includes painted fiberglass wheel pants and cowling, pull-pull
rudder assembly, twin elevator and aileron mounts, scale tailwheel assembly,
dual landing gear, 700 ml gasoline-ready fuel tank and comprehensive
hardware package.
Break out your sunglasses, lather up the suntan lotion, and come party in the
sun.
Order No. SIGRC89ARF
Specifications
Wingspan:
Wing Area:
Length:
Weight:
Radio Required:
Engine Required:
1831 mm
109.80 dm²
1676 mm
7250 to 8150 g
4 Channels, 8 Servos
(2.4-3.2) 40 to 52 cm³ Gas
Sun Dancer ARF
Order No. SIGRC89ARF
Order No. SIGRC79ARF
3D Mayhem ARF
Over the past several years, aerobatics has taken on a completely new
dimension. 3-D flying has grabbed hold and more airplanes are dancing in the
air than ever before. Now you too can perform these totally X-treme maneuvers
with the SIG 3D Mayhem ARF. This is not just your average aerobatic flyer. The
3D Mayhem incorporates all the engineering required to bring 3-D aerobatics to
your field. Generous wing area, lightweight construction and outrageously huge
control surfaces with gargantuan throws; all limited only by your skills. As with
all SIG ARFs, only the finest balsa and plywood is used and then covered with
Oracover® polyester film. Complete hardware package includes a pull-pull rudder
assembly, twin aileron servo mounts, short-coupled elevator mount, dural
aluminum landing gear, scale tail wheel assembly and painted fiberglass
cowling and wheel pants.
Specifications
Wingspan:
Wing Area:
Length:
Flying Weight:
Radio Required:
Engine Required:
1830 mm
75.3 dm²
1500 mm
3090 g
4 Channels, 5 Servos
(.61-.91) 10 - 15 cm³ 2-Stroke Glow;
(.70-.91) 11.5 - 15 cm³ 4-Stroke Glow
100
3D Mayhem ARF
Order No. SIGRC79ARF
www.kavanrc.com
SIG - R/C Airplanes
Cap 231EX ARF
The Cap 231EX is capable of every thing imaginable and then some in
the air. Includes a fully air foiled vertical fin and horizontal stabilizer,
complete hardware package with fiberglass wheel pants and cowl,
removable painted canopy, aluminum landing gear, scale tailwheel
assembly, and 470 cc fuel tank. IMAA legal.
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
Cap 231EX ARF
1854 mm
62.1 dm²
1663 mm
4750 - 5000 g
4 Channels, 6 Servos
(1.2-1.5) 21 - 24.6 cm³ 2-Stroke Glow;
(1.2-1.5) 21 - 24.6 cm³ 4-Stroke Glow
Order No. SIGRC77ARF
Order No. SIGRC77ARF
Extra 300XS ARF
Conquering the world in full size aerobatics, Extra 300
airplanes are the choice of many serious competitors. SIG's
Extra 300XS comes with double beveled elevator and rudder
hinge lines, allowing full 3-D surface movements on demand.
Includes decal, hardware package with pre-painted fiberglass
wheel pants and cowl, removable painted canopy, aluminum
landing gear, wheels, and 470 cc fuel tank. IMAA legal.
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
Order No. SIGRC78ARF
Extra 300XS ARF
www.kavanrc.com
1870 mm
63.9 dm²
1727 mm
5400 - 5900 g
4 Channels, 6 Servos
(1.2-1.5) 19.7 - 24.6 cm³ 2-Stroke Glow
(1.2-1.8) 19.7 - 29.5 cm³ 4-Stroke Glow
(2.5) 40 cm³ Gasoline
Order No. SIGRC78ARF
101
SIG - R/C Airplanes
1/6 Scale Piper J-3 Cub BIY
Order No. SIGRC3
The light wing loading, hands-off stability, and forgiving
flight characteristics that made the Cub so popular with fullscale pilots are also ideal for model builders. The Cub design
is nearly perfect for R/C flying - making a beautiful scale
model that is easy to fly. This is the all-time classic Cub kit
designed by Chuck Hollinger, and originally kitted by
Berkeley over 30 years ago. Built-up balsa construction,
strong one-piece wing. Includes hardware, spruce wing
struts, molded ABS engine cowling, formed wire landing
gear, decals, etc. Dummy engine, laminated prop, and
opening door on the Cub pictured are not included in the kit.
Modeler Charles Viosca added these extra scale details to his
Cub.
Specifications
Wingspan:
Wing Area:
Radio Required:
Engine Required:
1800 mm
45.2 dm²
4 Channels
(.25-.40) 4 - 6.5 cm³ 2-Stroke;
(.40-.45) 6.5- 7.5 cm³ 4-Stroke
1/6 Scale Piper J-3 Cub BIY
Order No. SIGRC3
1/5 Scale Piper J-3 Cub BIY
Added to the BIY line of kits for SIG's 50 year Anniversary. Scale
details including a functional side door and window, dummy
engine cowls with "eyebrow" air scoops, scale-like wire landing
gear, a fully detailed instrument panel and even the realistic
"bird's eye-view" window on top of the cabin. Includes hardware,
decal sheet, fiberglass molded cowling, tail wheel assembly, etc.
Laser cut wood parts.
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
Engine Required:
2146 mm
61.1 dm²
1403 mm
3200 g
4 Channels, 5 Servos
(.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow
(.45-.60) 7.5 - 10.7 cm³ 4-Stroke Glow
1/5 Scale Piper J-3 Cub BIY Order No. SIGRC82
102
Order No. SIGRC82
www.kavanrc.com
SIG - R/C Airplanes
1/4 Scale Clipped Wing Cub BIY
In 1969 Hazel Sig, President of SIG Mfg. Co., rebuilt a standard 1941 Piper J-3
Cub for aerobatic flying. To improve the airplane's aerobatic performance, 1 m
was cut off each wing panel, and the engine was reworked to produce 75 hp
instead of its normal 65 hp. The entire framework of the Cub was rebuilt and a
dazzling sunburst paint job was applied with SIG Supercoat Dope. Over the
years Hazel progressed to more powerful airplanes for her aerobatics, but none
ever captured the affections of modelers worldwide as has the Clipped Wing
Cub.
In the air, the 1/4-scale version of Hazel's Cub is as smooth, stable, and
responsive as the big one. Basic aerobatic maneuvers such as loops, rolls,
spins, and snaps are easy. Easy-to-Build balsa, plywood, & spruce construction
kit. Strong one-piece wing. Complete hardware pack includes molded ABS
engine cowling, scale dummy engine and bungee covers & air cleaner, factory
formed main landing gear wires and scale-like leaf-spring steerable tailwheel
assembly, decals, etc.
Specifications
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
1/4 Scale Clipped Wing Cub BIY
2185 mm
83.9 dm²
6350 - 6800 g
1700 mm
4 Channels
(.60-.90) 9.8 - 15 cm³ 2-Stroke;
(.90-1.60) 15- 26 cm³ 4-Stroke
Order No. SIGRC47
Order No. SIGRC47
Maxe
y Hes
te
r, And
rea
Martin
1/4 Scale Piper J-3 Cub BIY
Made of the finest SIG AAA grade balsa and plywood,
this precision die-cut model goes together fast. Molded
detail parts such as engine cowling, dummy engine
cylinders, bungee covers and air cleaner add to the scale
presence. Sale-like leaf-spring tail wheel and formed wire
main gear assemblies that have set the standard for
years. Two-piece wing. Includes complete hardware and
authentic decals.
Order No. SIGRC48
www.kavanrc.com
Specifications
Wingspan:
Wing Area:
Fuselage Length:
Flying Weight:
Radio Required:
2667 mm
103.22 dm²
1700 mm
6400 - 7300 g
4 Channels with
Heavy Duty Servos
Engine Required:
(.60-.90) 10 - 15 cm³ 2-Stroke
(.90-1.5) 15 - 25 cm³ 4-Stroke
1/4 Scale Piper J-3 Cub Order No. SIGRC48
103
SIG - R/C Airplanes
Spacewalker 1/3-Scale BIY
Although it looks like it's straight out of the 1930's, don't bother looking up
this one in your aviation history books. The Spacewalker was designed by
Jesse Anglin of Hendersonville, North Carolina and first flew in 1986! Despite
the fact it is a relatively new design, the Spacewalker manages to capture all
the spirit of Aviation's Golden Age.
This 1/3-scale model of Jesse's Spacewalker retains all of the charm of his
beautiful homebuilt. Plans for the full-size aircraft were scaled down for the
ultimate in scale accuracy. Construction is easy with pre-formed fiberglass
parts such as cowling, wingtips, and wheel pants and conventional balsa and
plywood construction.
In the air, Spacewalker is certain to please. The big wing, thick airfoil, and
long tail moment make for stable approaches and soft, slow landings. But
before coming back to earth, it can do enough loops, rolls, snaps, and spins
to make any sport pilot happy. Here's a scale model that almost anyone can
handle! 3-Piece wing with aluminum wing joiners. Includes hardware, scale
leaf-spring tailwheel assembly, authentic decals, etc.
Specifications
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
Spacewalker 1/3-Scale BIY
2640 mm
116.1 dm²
9070 g
1828 mm
4 Channels,
(2 aileron, 1
(1.5-2.4) 25 (1.8-3.0) 30 -
Order No. SIGRC61
5 Servos
elevator, 1 rudder, 1 throttle)
40 cm³ 2-Stroke Glow;
50 cm³ 4-Stroke Glow
Order No. SIGRC61
Spacewalker II 1/4-Scale BIY
Although highly popular with the giant-scale crowd, the 1/3-Scale
Spacewalker is simply too large for some modelers. In response SIG
brings you the 1/4-Scale Spacewalker II. Easy-to-build conventional
balsa and plywood construction with pre-formed ABS cowling,
wingtips, and wheel pants. Legal for IMAA and QSAA fly-ins, this 1/4scale model is made for flying. The thick semi-symetrical airfoil and
long tail moment provide perfect stability and low speed handling. At
full-throttle, it can do all the aerobatics you dreamed of. Includes
hardware, scale leaf-spring tailwheel assembly, decals, etc.
Order No. SIGRC59
Specifications
Wingspan:
Wing Area:
Weight:
Length:
Radio Required:
Engine Required:
Spacewalker II 1/4-Scale BIY
104
2133 mm
71.6 dm²
5440 g
1530 mm
4 Channels
(.90-1.20) 15 - 20 cm³ 2-Stroke Glow;
(1.20-1.60) 20 - 26 cm³ 4-Stroke Glow
Order No. SIGRC59
www.kavanrc.com
Super Chipmunk C/L BIY
Semi-Scale C/L Stunt. Conventional built-up balsa contstruction. Follows the lines and color scheme of the
full-size aerobatic Super Chipmunk flown by Skip Volk. The unique lines of the cowl and canopy set the
model apart from the average stunter. It's a proven contest winner.
Order No. SIGCL19
Wingspan:
Length:
Wing Area:
Weight:
Engine Required:
1359 mm
990 mm
36.8 dm²
1330 - 1420 g
(.29-.40) 4.8 - 6.5 cm³ 2-Stk
Super Chipmunk C/L BIY
Order No. SIGCL19
Beechcraft Staggerwing C/L BIY
1/2A C/L Profile Scale. Takes off easily, grooves smoothly around the circle and handles effortlessly. Inverted
flight, loops and other aerobatic maneuvers are routine with this beauty.
Wingspan:
Engine Required:
457 mm
(.049 reed valve) 0.8 cm³ 2-Stk
Beechcraft Staggerwing
Order No. SIGCL17
Order No. SIGCL17
Skyray 35 C/L BIY
Control Line Profile Stunter. Excellent all purpose design suitable for stunt, combat, sport racing, balloon bust, or
general Sunday flying. With a .19 engine it makes a good first C/L trainer. Bolt on a .35 Stunt engine and the Skyray
35 will fly the complete AMA stunt pattern.
Order No. SIGCL25
Wingspan:
Wing Area:
Length:
Engines:
1118 mm
25.5 dm²
838 mm
(.19-.35) 3.1 - 5.7 cm³ 2-Stk
Skyray 35 C/L BIY
Order No. SIGCL25
SIG - C/L (Control Line) Airplanes
See SIG Introduction, page 82 or www.sigmfg.com for more details.
Skyray C/L BIY
1/2A C/L Profile Stunter. SIG's most popular C/L airplane. Designed by 6-time National Champion Mike Gretz, it's an ideal
first-time C/L trainer for the beginner. Detailed instructions cover building, pre-flight, and flying.
Wingspan:
Wing Area:
Engine Required:
603 mm
6.5 dm²
(.049 reed valve) 0.8 cm³ 2-Stk
Skyray C/L BIY
Order No. SIGCL23
www.kavanrc.com
Order No. SIGCL23
105
SIG - C/L (Control Line) Airplanes
Akromaster C/L BIY
Compact C/L Profile Stunter. Easy to build, good beginner's stunt plane. It's thick fully-symetrical
wing and short tail moment will let you learn the basics without risking a more expensive full-size
stunter.
Wingspan:
Wing Area:
Engine Required:
863 mm
16.1 dm²
(.15-.19) 2.5 - 3.1 cm³ 2-Stk
Akromaster C/L BIY
Order No. SIGCL20
Order No. SIGCL20
Shoestring C/L BIY
Control Line Profile Goodyear Racer. With a hot .15 (2.5 cm³), this compact little speedster has brought
home lots of trophies over the years. The Shoestring also makes a durable C/L trainer or sport flier.
Wingspan:
Wing Area:
Length:
Engine Required:
610 mm
9 dm²
622 mm
(.10-.15) 1.6 - 2.5 cm³ 2-Stk
Shoestring C/L BIY
Order No. SIGCL13
Order No. SIGCL13
Banshee C/L BIY
Control Line Profile Goodyear Racer With Flaps. An ideal stunt trainer for up and coming fliers,
or an excellent practice airplane for the competition flier.
Wingspan:
Wing Area:
Engine Required:
1245 mm
33 dm²
(.29-.40) 4.8 - 6.5 cm³ 2-Stk
Banshee C/L BIY
Order No. SIGCL11
Order No. SIGCL11
Twister C/L BIY
C/L Profile Stunter With Flaps. An ideal stunt trainer for up and coming fliers, or an excellent
practice airplane for the competition flier.
106
Wingspan:
Wing Area:
Engine Required:
1220 mm
31.6 dm²
(.29-.40) 4.8 - 6.5 cm³ 2-Stk
Twister C/L BIY
Order No. SIGCL22
Order No. SIGCL22
www.kavanrc.com
Molded from self-lubrication nylon for super strength, low friction, and long life. 1/2A Bellcrank is for sport
models up to (.15) 2.5 cm³ engine size. Includes control horn and mounting screws. 76 mm Bellcrank is for C/L
sport and stunt models from (.15 to .60) 2.5 - 9.8 cm³ engine size. Includes nylon bushing, mounting bolt, nut and
washers. 102 mm Bellcrank is for large stunt models.
1/2A Bellcrank
76 mm Bellcrank
102 mm Bellcrank
Order No. SIGSH234
Order No. SIGSH480
Order No. SIGSH754
No. SIGSH754
No. SIGSH234
No. SIGSH480
SIG Fueler
Lead Out Wire
Order No. SIGSH447
7-strand stainless steel wire. Use between the
bellcrank and the exit point at the wingtip.
1/2A, (.021") .53 mm x 1.2 m
Order No. SIGSH446
Regular, (.027") .69 mm x 1.8 m Order No. SIGSH447
Perfect for priming engines and quick filling small fuel tanks. The
graduated scale (cc and ounces) on the side allows accurate
measurement of the fuel. Good for C/L combat flying or outdoor F/F,
where a precise injection of fuel into a bladder is required. Also great for
removing the leftover fuel from the tank after flying. Includes silicone
fuel tubing for quick-connecting to the tank. For glow fuel only; not for
gasoline.
SIG Fueler 1/2A (12 cc)
SIG Fueler 2 oz. (60 cc)
SIG Fueler 5 oz. (148 cc)
Order No. SIGSH722
Order No. SIGSH619
Order No. SIGSH679
SIG Fueler
C/L Line Connectors
C/L Line Connectors
Pack: 4 pcs.
Small, (15 lb) 6.8 kg test
Medium, (22 lb) 10 kg test
Large, (49 lb) 22 kg test
Order No. SIGSH445
Order No. SIGSH444
Order No. SIGSH443
1/2A Control Line Handle
For planes up to (.074) 1.2 cm³ engine size. Three sets of holes allow
variable control sensitivity. It's simple to adjust elevator neutral using
plastic clamp and self-tapping screw. Includes control handle, Dacron flying
line, and line connectors.
Order No. SIGSH544
SIG - C/L (Control Line) Accessories
Heavy Duty Nylon C/L Bellcranks
Braided Control Lines
High quality 7-strand braided stainless steel cable with steel clips, end
hardware and instructions for assembly. All SIG lines are supplied on a
Control Line Reel.
Replacement Control Line Reels
2-Line Cable
Order No.
(.012")
(.012")
(.012")
(.015")
(.015")
(.015")
(.018")
(.018")
(.018")
SIGSH453
SIGSH454
SIGSH455
SIGSH456
SIGSH457
SIGSH458
SIGSH459
SIGSH460
SIGSH461
Control Line Reel- Standard Order No. SIGSH441
0.3 mm x 2x 10.7 m
0.3 mm x 2x 15.8 m
0.3 mm x 2x 21.3 m
0.38 mm x 2x 15.8 m
0.38 mm x 2x 18.3 m
0.38 mm x 2x 21.3 m
0.46 mm x 2x 15.8 m
0.46 mm x 2x 18.3 m
0.46 mm x 2x 21.3 m
www.kavanrc.com
Injection-molded plastic reel. Generally, Standard
fits 2-Line Cables and Large fits 3-Line Cables.
Control Line Reel- Large
Braided Control Line
Order No. SIGSH745
Note from SIG factory fliers: to
prevent kinking control lines
during use, always unroll the
lines from the reel and roll them
back on. Do not take the lines
off hand-over-hand. See the AMA
Rule Book (USA) for line size
recommendations for specific
size and type models.
Order No. SIGSH544
1/2A Dacron Flying Line
For control line planes up to
(.074) 1.2 cm³ engine size. Pack:
18.3 m roll.
Order No. SIGSH440
No. SIGSH440
Order No. SIGSH745
107