WOOD PROCESSING MACHINES EUR 320.000,-

FACTORY - NEW & SECOND - HAND
WOOD PROCESSING MACHINES
EUROPEAN MACHINERY & PRODUCTION LINES
# PL 14801
EUR 320.000,-
current location: central Poland
MULTILAYER FLOORING LINE + BÜRKLE PRESS (1999-2001)
USED EQUIPMENT
Complete assembly line for gluing multilayer flooring boards: multi-saw, middle-layer formatting section,
assembly, glue application, 2x6 shelves large press, receiving portal, computer.
Manuf./Install./Decom.: 1998-2001 / 2000 / 2010
Manufacturer:
SYSTEM WILD,
Germany
Current Location:
central Poland
original location
Condition:
very good, fully operational
Documentation:
DE/EN/IT/PL
Dimensions (L x W x H):
ca. 37 x 13 x 5 m
Weight:
ca. 80 t ? (35 t largest item) ?
Manufacturing Capacity: 250-300 pcs./h
 Gabbiani multisaw / GMC housing (2001)
150-300 mm. 4-24 m/min.
 Glue applicator, Hymmen cooling drums, TLA 600
(1998): 100-160 g/m2, 15 or 30 m/min.
 Bürkle Optima press (1998),
2 x 6 shelves 2600 x 1100 mm
(effective surface 2300 x 970 mm), opening 90 mm,
85-95°C (heating: water), pressure 50-300 Bar,
hydraulics (Bosch): oil, the line is currently pre-set for
3-layer boards 1100-2200 x 180-250 x 14-22 mm
 Intel® Pentium®, Beckhoff electronics 7213GM
 Bauer/SEW motors, Bosch hydraulics, Festo/SMC
pneumatics, Leuze light barriers
 Power 440V (22kW, 55A, 50Hz), 3x 16mm2+N+T
 Required compressed air pressure: 6,5 bar
The above stated price is indicated net of VAT, EXW and does not include disassembly, packing, stowage, freight, installation or set-up/start-up.
Equipment/machinery presented above is a used (second-hand) one, hence subject to natural wear-and-tear and - as such - is not covered by any
warranty or guarantee. Prospect Buyer is welcome and expected to perform an on-site inspection to asses and become familiar with the current
condition of the equipment/machinery. No modernization, replacement, upgrade or modification of parts or software are foreseen or offered
- the prospect Buyer deciding on the purchase is deemed to be familiar with the subject of the transaction and accepting its condition without any
objections whatsoever. This product Information has been prepared in good faith and to the best of our knowledge, based on the available data
and documentation, which may potentially be incomplete and/or imprecise, therefore this document is to be treated as general and introductory
Information only and does not constitute a binding commercial offer as defined by the Commercial or Civil Codes of the Republic of Poland. The
product is free from legal defects and HOLZMAX, Piotr Chajdas (owner of ‘HOLZ MACHINE’ brand) is a sole and exclusive owner (or owner’s
representative agent) of the equipment/machinery described above.
www.holzmachine.eu
+ 48 603 072 572
[email protected]