Brochure - Kimray, Inc.
Transcription
TRITEX II ELECTRIC ACTUATOR TRITEX II ELECTRIC ACTUATOR INTRODUCTION The combination of the TRITEX II Electric Actuator and a Kimray high pressure control valve provides a precise and reliable method of control. This solution eliminates emissions, provides communications that tie directly into the SCADA system and operates on low power consumption. The Tritex II redefines electric actuation. MAXIMUM CONTROL BY DESIGN The TRITEX II uses a roller screw attached to a servo motor to convert the rotary motion of the motor directly to a linear force. The controls and positioner used in the actuator provide closed-loop feedback, eliminating the need for limit switches, torque switches or any mechanical means of feedback. The electronics provide a 4-20 mA input and output, as well as digital capability. The result is speed, precision and a long-lasting actuator with little to no maintenance. KEY DESIGN FEATURES • Available for all Kimray high pressure control valves 1”- 4” For 6” and above, contact your Kimray representative for application assistance • The use of a servo motor to effortlessly move the actuator in any direction for 100% duty cycle • Class I Div 2 Certification, perfect for outdoor use • The use of direct feedback and controls to provide perfect positioning at all speeds and forces. • 12-48 VDC Solar bus capabilities • Fail safe positioning if low bus voltage limit is reached or loss of signal is detected 02 • Analog or Digital communications (4-20 mA or MODBUS over RS485) For more information please visit Kimray.com TRITEX II ELECTRIC ACTUATOR TRITEX II ROLLER SCREW • Direct conversion of rotary motion to a linear force • High shock resistance • Extreme efficiency • Programmable speed and acceleration SERVO MOTOR • High efficiency (90%) • Position feedback • Adapts to changing loads • Faster positioning • Rapid acceleration • Reserve power • Capable of short bursts of peak current to improve positioning • Quiet • 100% duty cycle TYPICAL APPLICATIONS • Flow control valve • Pressure control upstream/downstream/differential • Choke valve • Compressor controls • Gas lift valve • Dump valve TECHNICAL FEATURES Voltage 12-48 VDC I/O 4/3 isolated digital 1/1 isolated 4-20 mA Rating Class I, Division 2, Groups A,B,C & D Connection 1/2" NPT Temp -40 C to 65 C / -40° to 149° F Force Continuous to 872 lbf Peak to 1190 lbf Stroke 3" max Speed up to 5 in./sec Duty Cycle 100% Life 100M + strokes WHO WE ARE Kimray designs and manufactures oil and gas control products. Based on over 65 years of pioneering product development, we provide products and services that work better, smarter and are more inventive. We generate meaningful solutions by staying curious and engaging in customers’ needs. Our product ideas are fueled by a deep desire to make a difference that is both personal and unique to the customer. We have made it our life’s work to provide products and services that are positively impactful. Through the years this pursuit has built strong relationships. Our customers have known that when buying from Kimray, it’s about much more than the product. The relationships between Kimray representatives and our customers extend from before the sale through the life of the product. Those relationships, along with quality Kimray products are the result of a company striving for excellence for our customers, our company and our community. Visit Kimray.com to learn more about our company and the products we create. Kimray.com © 2015 Kimray, Inc. 4/15 MKSL-0194
Similar documents
Actuator Market Growth, Competitive Scenario & Forecasts To 2020: Radiant Insights, Inc
This market research analyst predicts the global actuator market to post a CAGR of approximately 4% from 2016 to 2020. Increased investments in automation projects will further fuel the demand for actuators during this period. Oil and gas industries, as well as the water and wastewater industries, will majorly influence the demand for actuators until 2020. Visit Us @ http://www.radiantinsights.com/research/global-actuator-market-2016-2020
More informationMicro Actuator Market : Global Industry Analysis and Forecast 2016 - 2024
On the basis of types micro actuator can be segmented as electric micro actuators, functional material based micro actuators, shape memory alloy (SMA) micro actuator, and others. Electric micro actuator can be further sub segmented as electromagnetic micro actuators and electrostatic actuators.
More information