lit-reusable_bags_filters

REUSABLE Cloth Bags & Air Filters
for Vacuum Filters, Coolant Tanks and Exhaust Filters
PSI now has a better way to handle the debris created by cutting lenses in dry cut edgers, generators and for use in various other dust and swarf collection systems
as well as 140 liter coolant tanks and air filters. The new reusable cloth bags will save the lab money while helping the environment.
Vacuum Filter Bags
• Easy On The Environment – No paper bag disposal
• Reduces Consumable Costs - For a little more than the cost of one box of OEM paper bags, PSI’s Reusable Cloth Bags may provide years of reliable
service if maintained properly and handled with reasonable care.
• Eliminates The Mess Of “Wet” Paper Bag Failure - The ODC-1 reusable cloth vacuum bag does not fall apart when exposed to moisture when
using the “Water Mist Edge-Polishing Feature” on Optronics dry edgers.
• Reduces Replacement Part Costs – The cloth filter cover included with the ODC-1, filters dust that would
normally pass through the vacuum motors while not becoming clogged like paper covers. By improving the
removal of lens particulates (poly swarf) it extends motor and cutter life and improves
lens edge finish quality.
Part #s:
ODC-1
for Optronics dry cut edgers and generators as
well as Nilfisk vacuums (includes vacuum bag
and filter cover)
RB-GEN
for SG-X generator vacuums
RB-Q
for Quatro & Quatro Velocity vacuum systems
Coolant Tank Bags
• Finished edges – the RB-CT has an elastic top and the RB-OT has a finished edge with drawstring
• Longer lasting - made of quality materials so the bags last longer
Part #s:
RB-CT
coolant tank wet bag for ES3 edger and V-series generators fits 140 liter coolant tanks; 150µ 114” circular x 28” L with elastic top
RB-OT
coolant tank bag for Opto-Tech machines, 400 µ, 16” dia. x 24”
RB-VFT
coolant tank bag for VFT-Micro digital machines, 200µ
RB-SPRINT coolant tank bag for Sprint machines, 150µ
RB-SPRINT
Air Filter
• Reuse your frame – Quality filter fits over machines existing frame for easy use and disposal
Part #s:
AF-ES3-200
Exhaust Filter for ES3, 200µ, 6 to a pack
To Order Call PSI at 800-237-8154!
Revised 04/21/15
Easy To Use:
Installation for ODC-1 Vacuum Filter Bag and Filter Cover
NO Tools Required. Is installed and removed from the vacuum canister the same way as a paper bag
To empty the Re-Usable Cloth Vacuum Bag
• Liftthevacuummotorassemblyfromthe“red”canisterandremovetheclothbag.
• Placetheclothbagintoawastecontainerandopenthesidezipper.
• Holdthebagateachendwiththezippersidedownandgentlyliftsothewastematerialdropsoutof
the bag into the waste container.
(NOTE: shaking the bag may create air-borne dust and is not advised)
To Clean the Re-Usable Cloth Filter Cover
• WithAShopVac
– Vacuum any dust that has accumulated around the outside of the cover.
– Remove the retainer band located around the top (opened end) of the filter cover by pressing the
ends together and expanding the retainer ring.
– Slip the filter cover off the filter and inspect the foam filter located beneath. Vacuum all debris from
the foam filter .
– Replace the cloth filter cover and retainer ring making certain the foam filter is completely covered
by the cloth.
• Ifnoshopvacuumisavailable
– Place the filter cover over a waste container.
– Remove the retainer band located around the top (opened end) of the filter cover by pressing the
ends together and expanding the retainer ring.
– Slip the filter cover off of the filter and brush any accumulated debris off.
– Inspect the foam filter located under the filter cover. If dirty, remove it and rinse it out with water.
NOTE: make certain that the foam filter is completely dry before reinstalling.
– Replace the cloth filter cover and retainer ring making certain the foam filter is completely covered
by the cloth.