Nilfisk-ALTO ATTIX 965-0H/M SD XC – WHY COMPROMISE

Transcription

Nilfisk-ALTO ATTIX 965-0H/M SD XC – WHY COMPROMISE
Nilfisk-ALTO
ATTIX 965-0H/M SD XC
– WHY COMPROMISE
Industrial health and safety powerfull two-motor
performance machine
ATTIX 965-0H/M SD XC
– The perfect industrial disposal concept for hazardous and
carciogenic dusts.
Featuring XtremeClean automatic filter cleaning
and a corrorion-proof Stainless Steel Sit Down
container that ensures durability and long life.
By choosing the correct container inlet, the
machine allows you to dispose of the debris with
a dustfree and therefore safe solution.
The container is equiped with two inlets and
two safety plugs:
• By use for M-Class dust, use the open disposal
bag and the upper fitting.
• When vacuuming H-Class dust, use the lower
inlet in combination with the safety filter bag
and close the upper inlet.
Technical data:
ATTIX 965-0H/M
SD XC
Air flow rate
l/min.
Vacuum
mbar/KPa
W
Power Pmax
W
Power PIEC
Working sound level
dBA
Container volume
l
Mains connection
V/~/HZ
Dimensions LxWxH
mm
Weight
kg
El cable
m
2 X 3600
230/23
2 x 1500
2 x 1200
67
50
230/1/50-60
615x690x990
45
10
Standard Accessories:
Filter bag
Filter element, H-class
Disposal bag for filter element
Item no.
302003473
302001134
302001480
302002903
The new improved XtremeClean fully automatic filter
cleaning system on ATTIX 965-0H/M SD XC is based
on a servo motor controlled Y-FLAP, where the filter
has the full surface available all the time during
operation. This ensures an even longer lifetime, high
efficiency and prevents power loss through restricted
airflow - without interruptions.
High level of filter filtration due to:
• Servo motor controlled Y-FLAP
• Total filter surface in use during
operation
• Automatic continuous filter cleaning
• Secures maximum performance
• Perfect control on cleaning cycles
The SitDown model is designed for mainly
dry pick-up, but the machine features Bypass
turbines that makes it possible also to vacuum
wet debris. Wet debris will not damage the
machine, but there is a risk of overfilling the
container!
Automatic Filter Cleaning System
Applications:
• Wood working - hard wood
• Plastics industry
• Metal workshops
• Pharmaceutical Industries
• Food and beverage
No claims can be made on the basis of information or illustrations contained in this leaflet. Subject to alteration of technical data, design and equipment.
Dealer:
Nilfisk-ALTO
Division of Nilfisk-Advance A/S
www.nilfisk-alto.com
Art. No. 901.007.352. 06.08 © by Nilfisk-ALTO. Djurs Gruppen Grafisk Support · Tlf. 86 48 36 33
The new ATTIX 965-0H/M SD XC is the most
powerfull two-motor machine that is approved
to be used for both H and M-Class.