ABB string inverters UNO-2.0/2.5-I-OUTD 2 to 2.5 kW

ABB string inverters
Solar inverters
ABB string inverters
UNO-2.0/2.5-I-OUTD
UNO-2.0/2.5-I-OUTD
2 to
2.5kW
kW
2 to
2.5
The UNO-2.0-I and UNO-2.5-I are
packed with ABB’s proven high
performing technology. The smallest
of ABB’s outdoor range, these
products are the right size for the
average rooftop installation.
The high speed and precise MPPT
algorithm enables more real-time
power tracking and improved energy
harvesting.
Efficiency of up to 96.3%
Despite the isolated operation, the
UNO-2.0-I and UNO-2.5-I feature an
efficiency of 96.3%. The wide input
voltage range makes the inverter
suitable to low power installations with
reduced string size.
In addition to its new look, this inverter
has new features including a special
built-in heat sink compartment and front
panel display system.
This rugged outdoor inverter has been
designed as a completely sealed unit to
withstand the harshest environmental
conditions.
Highlights
− Single phase output
− High frequency isolated topology
− Each inverter is set on specific grid
codes which can be selected in the
field
− Wide input range
− Flat efficiency curves ensure high
efficiency at all output levels ensuring
consistent and stable performance
across the entire input voltage and
output power range
IN1.1(+)
IN1.2(+)
IN1.1(+)
+
IN
IN
IN1.1(-)
-
IN1.2(-)
IN1.1(-)
HF
transformer
Inverter
(DC/AC)
Bulk caps
Grid parallel
relay
Line
filter
-L
IN
-N
-
-
IN1.2(-)
MPPT
(DC/DC)
+
+
IN1.2(+)
- PE
Standard version
-S version
Additional highlights
Solar inverters
− Natural convection
cooling for
maximum reliability
− Outdoor enclosure for unrestricted
use under any environmental
conditions
− RS-485 communication interface (for
connection to laptop or datalogger)
RS485
+ T/R
ABB string inverters
UNO-2.0/2.5-I-OUTD
2 to 2.5 kW
- T/R
RTN
DC/AC
DSP
Contr.
DC/DC
DSP
Contr.
Remote control
+R
-R
µP
Alarm
N.C
N.O
C
Control circuit
Technical data and types
Type code
Operating performance
UNO-2.0-I-OUTD
Additional
highlights
Maximum efficiency
(ηmax)
(EURO/CEC)
−Weighted
Naturalefficiency
convection
cooling for
Feed
in
power
threshold
maximum reliability
Stand-by consumption
−Communication
Outdoor enclosure for unrestricted
uselocal
under
any environmental
Wired
monitoring
Remote
monitoring
conditions
local
monitoring
−Wireless
RS-485
communication
interface (for
User interface
connection to laptop or datalogger)
UNO-2.5-I-OUTD
96.3%
95.1% / -
95.4% / 24.0 W
< 8.0 W (3)
PVI-USB-RS232_485 (opt.)
VSN300 Wifi Logger Card (9) (opt.), PVI-AEC-EVO (opt.), VSN700 Data Logger (opt.)
VSN300 Wifi Logger Card (9) (opt.)
Graphic display
Environmental
-25...+60°C (-13...+ 140°F)
-25...+60°C (-13...+ 140°F)
with derating above 50°C (122°F)
with derating above 45°C (113°F)
0...100 % condensing
< 50 dB(A) @ 1 m
2000 m / 6560 ft
Ambient temperature range
Relative humidity
Noise emission
Maximum operating altitude without derating
Physical
Environmental protection rating
Cooling
Dimension (H x W x D)
Weight
Mounting system
Safety
Isolation level
Marking
IP 65
Natural
518mm x 367mm x 161mm / 20.4” x 14.4” x 6.3”
< 17 kg / 37.4 lb
Wall bracket
Available products variants
Standard
With DC switch
Technical data and types
Type code
Input side
)
Absolute maximum DC input voltage (V
Start-up DC input voltage (V )
Technical
data
and
typesvoltage range (V dcmin...V dcmax)
Operating
DC
input
Type
codeDC input voltage (V dcr)
Rated
Input side
Ratedmaximum
DC input
power
(P(V
dcr)
)
Absolute
DC input
voltage
Start-up
DC input
voltage (V )
Number
of independent
MPPT
UNO-2.0-I-OUTD
UNO-2.0-I-OUTD-S
1. The AC voltage range may vary depending on specific country grid standard
2. The Frequency range may vary depending on specific country grid standard
3. Night time consumption < 0.6W
4. Limited to 2000 W for Germany
max,abs
5. Limited to 2500 W for Germany
Remark. Features not specifically listed in the present data sheet are not included
start
6.
7.
8.
9.
UNO-2.5-I-OUTD
UNO-2.5-I-OUTD-S
98
98
96
96
94
94
UNO-2.0-I-OUTD
UNO-2.5-I-OUTD
92
Limited to plant power ≤3kW
Limited to plant power ≤3.68kVA
The unit has not reactive power capability
Check availability before to order
92
90
Efficiency [%]
Grid standard (check your sales channel for availability)
Efficiency curves of UNO-2.0-I-OUTD
Efficiency [%]
Safety and EMC standard
HF transformer
HF transformer
CE (50 Hz only)
CE (50 Hz only)
EN 50178, EN62109-1, EN62109-2, AS/NZS3100, AS/NZS 60950, EN61000-6-2,
EN61000-6-3, EN61000-3-2, EN61000-3-3
CEI 0-21 (6), VDE 0126-1-1, VDE-AR-N 4105(7), G83/2, EN 50438 (not for all national
appendices), RD1699, AS 4777, C10/11, IEC 61727, ABNT NBR 16149, CLC/FprTS 50549
88
90
88
520 V
200 V (adj. 120...350 V)
0.7 x Vstart...520 V
UNO-2.0-I-OUTD
UNO-2.5-I-OUTD
360 V
Product flyer for UNO-2.0/2.5-I-OUTD | ABB solar inverters 3
2100 W
2600 W
520 V
200 V (adj. 120...350 V)
1
...V
)
...520 V
Operating DC input voltage range (V
23000.7Wx V360
Linear
derating from max to null
2900 W Linear derating from max to null
Maximum
input
V
Rated
DC input DC
voltage
(V ) power for each MPPT (P MPPTmax)
[470V≤V
[470V≤V MPPT≤520V]
MPPT≤520V]
2100 W
2600 W
Rated DC input power (P )
The
and
UNO-2.5-I
are ) at Pacr Efficiency 1of up
to 96.3%
Highlights
... VMPPTmax
200...470
V
200...470 V
MPPTof independent
input
DCUNO-2.0-I
voltage range
(VMPPTmin
Number
MPPT
Efficiency curves of UNO-2.0-I-OUTD
Efficiency curves of UNO-2.5-I-OUTD
2300
W Linear derating from
max to nullthe isolated
2900 W Linear
derating from the
max to null
MPPT
Maximum
DC
input
(I(Pdcmax) proven
)/ for each
Maximum
DC input
power
for current
each
packed
withMPPT
ABB’s
high
Despite
operation,
− Single phase
output
[470V≤V
≤520V]
[470V≤V
≤520V]
12.5
A
/
12.5
A
12.8
A / 12.8 A
(IMPPTmax
)
... V
) at P
200...470 V
200...470 V
MPPT
input DC voltage range (V
performing
technology.
smallest
UNO-2.0-I and UNO-2.5-I
feature an 15.0 −
High frequency isolated topology
)circuit
/ for eachcurrent
MPPT
Maximum
DC input
current
(I
Maximum
input
short
forThe
each
MPPT
A
12.5 A / 12.5 A
12.8 A / 12.8 A
(I
)
Support and
service is set on specific
For more
information please conta
of
outdoor
range,
these
efficiency15.0
of A96.3%. The wide input
inverter
grid
Number
ofshort
DCABB’s
inputs
pairs
for MPPT
each
MPPT
2 −ABBEach
Maximum
input
circuit
current
for each
supports its customers with
your local ABB representative or vi
Number of DC inputs
pairs for each
MPPT
2
products
the right size for the
voltage range
makes the inverter
codes
which
can
be
selected
in
the
DC connection
type are
Tool Free PV connector
WM
/
MC4
dedicated, global service organization
DC connection type
Tool Free PV connector WM / MC4
in more
www.abb.com/solarinverters
Input
protection
average rooftop installation.
suitable to low power installations with
fieldthan 60 countries and strong
Input
protection
regional and national technical partner
Reverse
polarity
protection
Yes,
from
limited
current
source
Reverse polarity protection
Yes, from limited current
reduced string
size.
−networks
Widesource
input complete
range range of
www.abb.com
providing
Input over voltage protection for each MPPT - varistor
2
Input over
voltage
protection
for each
MPPT
- varistor
2 −life Flat
cycle services.
Photovoltaic
array
isolation
control
According to local standard
The
high
speed and
precise
MPPT
efficiency curves ensure high
DC
switch rating forarray
each MPPT
(version control
with DC switch)
16 A / 600 V
Photovoltaic
isolation
According
standard at all output levels ensuring
algorithm
enables more real-time
In addition to its new look, this
inverter to local efficiency
Output side
DC
switch
rating
for
each
MPPT
(version
with
DC
switch)
16 A / 600 V
AC grid connection type
Single phase
power tracking and improved energy
has new
features including a special
consistent and stable performance
2000 W
2500 W
Rated
AC power
(P @cosφ=1 )
Output
side
@cosφ=1)
2200 W built-in heat sink compartment
2750 W
Maximum AC output
power (P
harvesting.
and front
across the entire input voltage and
AC
grid
connection
type
Single phase
Rated AC grid voltage (V )
230 V
panel
display
system.
output power 2500
rangeW
AC
voltage
range
180...264
V
2000 W
Rated AC power (P acr @cosφ=1 )
Maximum AC output current (I
)
10.5 A
12.5 A
(4)
2200
W
2750
W (5)
Maximum
AC
output
power
(P
acmax @cosφ=1)
Contributory fault current
16.0 A
This
rugged
outdoor
inverter
has
been
Rated
ACfrequency
grid voltage
(Vac,r)
230 V
50 Hz / 60 Hz
Rated
output
(f )
47...53 Hz / 57…63 Hz
Output frequency range (f ...f )
AC voltage range
180...264
V (1)
designed
as a completely sealed unit
to
Nominal power factor and adjustable range
> 0.990
Maximum
AC output
10.5 A environmental
12.5 A
Total
current harmonic
distortioncurrent (I ac,max)
<the
2% harshest
withstand
© Copyright 2014 ABB. All rights reserved.
Support
andblock,
service
For more information please contact
AC connection type
Screw
terminal
cable gland M25
Contributory fault current
16.0 A
Specifications subject to change without notice.
ABB supports its customers with
your local ABB representative or visit:
conditions.
Output protection
50 Hz / 60 Hz
Rated output
frequency (f r)
dedicated,
global
service
organization
Anti-islanding
protection
According
to local
standard
in more than 60
countries
and strong
www.abb.com/solarinverters
Maximum
overcurrent protection
15.0
A
47...53 Hz / 57…63 Hz(2)
OutputACfrequency
range (fmin...fmax)
Output overvoltage protection - varistor
2
(L
N
/
L
PE)
regional and national technical partner
Nominal power factor and adjustable range
> 0.990(8)
www.abb.com
networks providing complete range of
Total current harmonic distortion
< 2%
life cycle services.
2 AC
ABB connection
solar inverters | Product
type flyer for UNO-2.0/2.5-I-OUTD
Screw terminal block, cable gland M25
Output protection
Anti-islanding protection
According to local standard
Maximum AC overcurrent protection
15.0 A
Output overvoltage protection - varistor
2 (L - N / L - PE)
in the product
86
Vin=200V
82
80
Vin=425V
78
78
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
0%
100%
% of Rated Output Power
start
dcmin
82
Vin=360V
80
max,abs
dcmax
start
dcr
dcr
MPPTmax
MPPTmin
MPPTmax
MPPT
MPPT
acr
dcmax
98
98
96
96
94
94
92
92
90
90
Efficiency [%]
86
Vin=200V
82
80
Vin=360V
80
Vin=425V
0%
10%
20%
30%
40%
50%
60%
% of Rated Output Power
ac,r
(1)
ac,max
r
min
Vin=425V
78
78
(4)
Vin=200V
82
Vin=360V
acmax
86
84
84
acr
88
(2)
max
(8)
70%
(5)
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
% of Rated Output Power
70%
80%
90%
100%
BCD.00372 EN 14.04.2014
Efficiency [%]
MPPTmax
88
86
84
84
10%