31 GAS tANk

GAS tANk
rear Mount Gas tank
Chevrolet truck
GMC truck
1963-66
1963-66
31
Fuel Neck Filler Panel
See Page 75
1
2
Side Fill
top Fill
5
5
9
6
3
7
13
8
14
11
10
4
12
15
Relocating the gas tank to the rear of the truck moves the fuel's
weight to a more optimal location, frees up interior room and
eliminates gas fumes inside the cab.
Gas tanks are made from galvanized steel and fit wood or steel
bed trucks. Lock ring, gasket, mounting straps and hardware are
included.
The top fill tank lets you fill the 17-gallon tank easily on the bed
floor. When installed, the filler neck is located 3" from the left of the
bed centerline. On wood bed trucks this places the filler neck in the
center of the wood plank, so no modifications are required to your
bed strips.
The side fill tank has a capacity of 21 gallons and places the filler
neck above the left frame rail for multiple filler options.
PART
ILL#
DESCRIPTION AND APPLICATION
REQD
32-5981
32-5980
(1) GAS TANK W/STRAPS
(2) GAS TANK W/STRAPS
TOP FILL 63-66 (1)
SIDE FILL 63-66 (1)
32-4017
32-4054
32-4016
32-4055
32-4000
30-1292
32-5818
32-5816
(3) SENDING UNIT
SENDING UNIT-QUICK CONNECT
SENDING UNIT
SENDING UNIT-QUICK CONNECT
(4)
FLOAT-SENDING UNIT
(5) LOCK RING-GAS TANK
(6) GAS TANK STRAP SET-RR MOUNT
(7) GAS TANK ANTI-SQUEAK KIT
TOP FILL
TOP FILL
SIDE FILL
SIDE FILL
CHEVY GMC
CHEVY GMC
CHEVY GMC
CHEVY GMC
30-1439
30-1440
(8) FUEL FEED QUICK CONNECT
(9) FUEL LINE RETURN FITTING
3/8” TO -6AN MALE
1/4” NPT TO -6AN
www.LMC truCk .com
Order Your Catalogs & Parts Online
63-66
63-66
63-66
63-66
63-66
63-66
63-66
63-66
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Box 14991
Additional parts will be necessary to complete the installation. You
will need to add a gas filler neck, filler hose and gas cap; extend
the fuel feed line and sending unit wires; and relocate the framemounted spare tire. Custom fitting and fabrication will be required.
Instructions are not available.
Gas Tank Dimensions:
17 Gallon: 12" H x 19" W x 30" L
21 Gallon: 13" H x 19" W x 30" L
Tanks have a 1/4" NPT bung that can be used for a fuel return
line on trucks that have been modified with a fuel injected engine.
Sending units #32-4054 and #32-4055 are also available to make the
conversion easier with a quick connect fitting on the fuel feed outlet.
PRICE
$149.95*
$149.95*
$49.95
$49.95
$49.95
$49.95
$5.95
$3.95
$19.95
$9.95
$13.95
$7.95
* After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00
for each oversized part. Due to packing and/or transportation requirements, please allow
additional time for delivery. Oversized Parts are not available for air delivery.
REQD
PRICE
32-5804
32-5803
32-3352
PART
ILL#
(10) FUEL FILLER-POLISHED
KEYED
(11) FUEL FILLER-POLISHED
POP-UP
(12) FILLER HOSE-4”
1-1/2” ID W/CLAMPS
DESCRIPTION AND APPLICATION
(1)
(1)
(1)
$59.95
$69.95
$9.95
32-3499
30-1748
32-1948
(13) ALUMINUM FUEL LINE-3/8”
20’ ROLL
(14) FUEL LINE CLIP SET-8PC
3/8”
(15) FUEL HOSE-2FT
3/8” ID W/4 CLAMPS
(1)
(1)
(1)
$24.95
$11.95
$5.95
• Lenexa, kS 66285-4991
Before Ordering, read Pages 120 & 121
(800) LMC-truCk
toll Free - uSA & Canada