innovative damper products

Transcription

innovative damper products
INNOVATIVE DAMPER PRODUCTS
• THERMALLY INSULATED
DAMPERS
• AIR-FOIL CONTROL
DAMPERS
• SMOKE
DAMPERS
• BACK DRAFT
DAMPERS
MAINTENANCE-FREE
DUAL BEARING SYSTEM
TAMCO’s Dual Bearing System is a self-sealing, self-lubricating,
and non-absorbent assembly. It will never require additional
lubrication and ensures totally maintenance-free performance.
Metal-on-metal steel, bronze or oil-lite bearings and metalon-plastic nylon bearings have traditionally been one of the
weakest links in damper operation, requiring regular lubrication
or eventual replacement.
TAMCO's bearing-to-bearing arrangement eliminates action between metal-to-metal and metalto-plastic riding surfaces. TAMCO’s Dual Bearing System has a service life of 20 years plus.
Replacement bearings, which fit TAMCO dampers exclusively, have not been required in over 35
years, when dampers have been installed according to manufacturer's guidelines.
Experience the true meaning
of service and quality.
www.tamcodampers.com
MAINTENANCE-FREE PERFORMANCE
All TAMCO damper components are designed to provide optimal and completely maintenance-free performance.
TAMCO’s slip-proof linkage components keep blades aligned as per factory adjustment. The hexagon design
feature of the linkage and pivot elements allow for flat-on-flat press fits, eliminating play and wear.
TAMCO SERIES 9000 BF THERMALLY BROKEN FRAME DAMPERS
These aluminum, insulated dampers, installed “Flanged to Duct”, create a true thermal barrier
between outside air temperature and desired interior temperature. The thermally broken frame,
coupled with thermally insulated blades reduces, or eliminates condensation and freeze-up. Energy
savings are obtained from the resulting thermal efficiency and low air leakage rates.
The TAMCO SERIES 9000 BF is ideal where there are significant indoor and outdoor temperature
differentials down to -40°F (-40°C). Silicone blade and side seals are supplied as standard.
The TAMCO Series 9000 BF is available with the ECT Option and specifically designed for extreme
cold temperatures, below -40°F (-40°C)) and down to -100°F (--73°C). The formula for ECT silicone seals
is the same as the one used by NASA for its Aerospace program.
AIR LEAKAGE: Leakage Class 1A at 1 in w.g. (0.25 kPa) static pressure differential. Standard air
leakage data is certified under the AMCA Certified Ratings Program.
*TAMCO recommends that the 9000 BF damper not be “Installed in Duct”, as duct work creates a
thermal bridge.
TAMCO SERIES 9000 THERMALLY INSULATED DAMPERS
TAMCO’s thermally insulated blades are constructed using an aluminum shell, injected with
polyurethane foam. The optimum placement of three thermal breaks along the blades isolates the
warm and cold sides of the damper, and the non-metallic blade and side seals minimize thermal
bridging across blade surfaces. These design features combine to control the forces of radiation,
convection, and infiltration, and thus ensure blade insulating effectiveness.
The TAMCO SERIES 9000 supplies extremely flexible silicone side seals and EPDM blade gaskets
This series is available with the SC Option upgrade. Both blade and frame seals are silicone, and are
virtually unaffected by cold winter temperatures, down to -40°F (-40°C). This option ensures minimal
change in leakage rates as temperature drops and is ideal for severe cold weather applications.
Series 9000 dampers are also available with the SW Salt Water Resistance Option.
AIR LEAKAGE: Leakage Class 1A at 1 in w.g. (0.25 kPa) static pressure differential. Standard air
leakage data is certified under the AMCA Certified Ratings Program. Air leakage for a 36” x 36”
SERIES 9000 SC does not exceed 1.35 cfm/ft² at -40°F (-40°C).
TAMCO SERIES 1500 ENHANCED AIR-FOIL CONTROL DAMPERS
The TAMCO SERIES 1500 is an ultra low leakage, aluminum, airfoil blade damper, with all of the
maintenance-free bearing and linkage components of other quality TAMCO products. It is an ideal,
non-insulated specification choice for energy efficient, outside wall dampers, installed in warmer
climates.
The SERIES 1500 utilizes end caps installed on the hollow airfoil blades. This improves sealing on
the damper sides and further reduces leakage rates. Silicone seals are provided as standard, to
ensure tight sealing in either colder, or warmer climates.
Series 1500 dampers are available with the following options: ET Elevated Temperature Option, MR
Moisture Resistance Option, and SW Salt Water Resistance Option.
AIR LEAKAGE: Leakage Class 1A at 1 in w.g. (0.25 kPa) static pressure differential. Standard air
leakage data is certified under the AMCA Certified Ratings Program.
SALT WATER RESISTANCE OPTION - FOR SERIES 9000, 1000, 1500 & 1400
TAMCO dampers with the Salt Water Resistance Option maintain all of the dependability and
durability of the Dual Bearing System, the advantages of aluminum construction, and maintenancefree operation. The added features of this option (stainless steel hardware - anodized parts, blades,
and frames) enhance resistance to salt spray and airborne salt particles, and provide an ideal
solution for high humidity applications. Blade gaskets and side seals for dampers with the Salt Water
Resistance Option are provided in silicone.
Experience the true meaning of service and quality.
TAMCO SERIES 1000 AIR-FOIL CONTROL DAMPERS
The TAMCO Series 1000 is an all aluminum damper supplied with silicone frame seals and EPDM
blade seals as standard. The aluminum extrusions contribute to a prolonged and rust-free operational
life. Silicone and EPDM seals provide outstanding dynamic fatigue resistance that ensure sealing
longevity, plus excellent resistance to weathering, compression set, and heat.
Maintenance-free SERIES 1000 dampers are an excellent, reasonably priced choice for replacing
worn out dampers.
Series 1000 dampers are available with the following options: ET Elevated Temperature Option, MR
Moisture Resistance Option, and SW Salt Water Resistance Option.
AIR LEAKAGE: Leakage rate through a 36” x 36” (915 mm x 915 mm) at 1 in w.g. (0.25 kPa), at ambient
temperature, is no greater than 2.19 cfm/ft² (11.13 l/s/m²).
TAMCO SERIES 1000 SM UL/ULC APPROVED SMOKE DAMPERS
Leakage Rating: Class 1
Operational
Airflow: 2000 fpm (10.2 m/s). Rated for airflow in either direction.
Rating:
Temperature: 250°F (121°C )
Pressure: 4” w.g. (1 kPa) static pressure differential
Fail Position:
Closed
TAMCO smoke dampers are UL/ULC rated Leakage Class 1, the best possible leakage class
attainable. These dampers are manufactured with aluminum extrusions, which contribute to a
prolonged and rust-free operational life.
Extremely flexible silicone seals provide excellent resistance to heat, weathering, and compression
set, thus ensuring sealing longevity. The bearings are composed of a 2 part (inner and outer) bronze
oilite bearing system, fixed to an aluminum hexagonal blade pivot pin. This system prevents direct
rotation of the bearings within the frame and around the axle.
TAMCO smoke dampers are approved for use in passive systems, smoke control systems, and
smoke management systems, and are intended for installation in ducts and air transfer openings that
are designed to resist the passage of air and smoke. Smoke dampers may be required where ducts
penetrate though smoke barriers, or at other locations within an engineered smoke control system.
They are installed to operate automatically, controlled by a smoke detection system, and where
required, capable of being positioned from a remote command station.
ALSO AVAILABLE:
TAMCO Series 1000 SM SW UL/ULC Approved Smoke Damper
with Salt Water Resistance Option.
TAMCO SERIES 7000, 7000 WT & 7000 CW BACK DRAFT DAMPERS
TAMCO’s Series 7000, 7000 WT and 7000 CW Back Draft Dampers provide all of the advantages
of aluminum construction, with zinc-plated steel pivot points are over-sized for additional strength
and durability. Self-lubricating Celcon bearings ensure a maintenance-free and long-cycle life.
Silicone blade and side seals ensure sealing longevity. TAMCO’s back draft damper blades are
securely linked via a large diameter aluminum linkage rod. TAMCO’s Back Draft Dampers are
available in Front Flange, In Duct, or Rear Flange mounting types.
Series 7000 Back Draft Dampers are suitable for installations requiring a robust damper, subjected
to higher air-flows and operating pressures.
AIR LEAKAGE: Air leakage through a 24” x 24” (610 mm x 610 mm) back draft damper does not exceed 4.32
cfm/ft² (21.95 l/s/m²) against 1” (0.25 kPa) w.g. differential static pressure at standard air. Standard air leakage
data is certified under the AMCA Certified Ratings Program.
TAMCO’s Series 7000 WT Weighted Back Draft Dampers Weights provide increased load resistance
and tighter shut-off. Adjustable weights mounted on the exterior face of each blade, permit the blade
opening to be tailored to achieve the required resistance and optimal performance, based on
installation conditions. (Weights are removable.)
TAMCO’s Series 7000 CW Counterweighted Back Draft Dampers are fully adjustable and can be
set to relieve air pressure differentials less than .01” w.g. Counterweights are threaded and allow
adjustments to be made easily.
www.tamcodampers.com
OVER 50 YEARS OF EXPERIENCE
IN INNOVATIVE AIR CONTROL SOLUTIONS
TAMCO is an innovative manufacturer of high-end, quality
dampers and air control products, serving commercial,
industrial and institutional markets.
T. A. Morrison & Co., Inc. entered the ventilation industry
in 1955. In 1980, TAMCO began to produce its own line
of aluminum dampers. Great attention has been devoted
to design, in order to develop products which are durable,
maintenance-free and unparalleled in performance.
Advancements in digital control systems have been instrumental
in spurring the development of TAMCO air control products.
TAMCO is successfully leading the charge to bring creative
solutions to the air control market.
DISTRIBUTION NETWORK
ACROSS NORTH AMERICA
TAMCO has developed a comprehensive network of
distributor representatives, which covers all major
Canadian urban centers. TAMCO has also established
a solid and continually expanding distribution network
across the United States.
COMMITMENT TO QUALITY
•TAMCO’s design and material
matrix provide for durable and
dependable components.
• TAMCO’s sound workmanship
ensures product integrity.
• TAMCO’s dampers undergo
exacting quality control checks at
every stage of production.
CUSTOMER SERVICE
• TAMCO provides installation guidelines with every order.
•Before- and after-sales technical support and service are
available.
• TAMCO products and personnel are your guarantee of
total performance.
• TAMCO’s top priority is total commitment to your
satisfaction with our products and service.
SUCCESS
A DALEY OCCURRENCE AT TAMCO
Mr. Dan Romero, Chief
Engineer at the Richard J.
Daley Center, Chicago,
headed the project to retrofit
one of the key systems in
this building. The primary
requirement was to find a
low-leakage, maintenancefree damper product that
could withstand 9 inches of
static pressure.
A meeting between Stern
Mechanical, Mr. Romero
and Mr. Jim Karambelas
of EIP was instrumental
in developing a plan for
TAMCO to supply more
than 2,700 square feet of dampers for this job. The damper
selected was the Series 1500 (AMCA certified at 1.7 cfm/sq.ft.
at 1 inch of static pressure). The application also called for the
use of specially designed, TAMCO horizontal and vertical jack
shafts. Pneumatic actuators were used in a tandem position,
as shown in the picture to
the right.
MB Real Estate was so
pleased with TAMCO’s
product and service that
they have decided to
replace all of the other
existing dampers, with
TAMCO dampers for the
rest of this project.
Visit TAMCO’s web site for our newest updates
www.tamcodampers.com
To contact TAMCO Customer Service, dial
1-800-561-3449
or e-mail: [email protected]
27 Iber Road, Stittsville, ON, Canada, K2S 1E6
Mike Davis
EIT, LEED Green Associate
Flow Tech, Inc.
10 Bidwell Road
South Windsor, CT 06074
Tel: 860.291.8886 ext. 27
Mobile: 860.685.0062
Fax: 860.291.9908