hC2 Dismount RF-7800N-BM400
Transcription
hC2 Dismount RF-7800N-BM400
TACTICAL COP SYSTEM hC2 Dismount RF-7800N-BM400 KEY BENEFITS >Mobile > Common Operational Picture (COP) with the most up-to-date information at the edge >View > and edit order overlays to share with subordinates and report back up echelon >Geofencing > capabilities enabling alerts when tracks enter the specified zone >Reliable > access to map information even when offline Harris hComms Battle and Communications Network Management Software addresses mission-critical needs for full-spectrum network-operations management, complete battlefield management and advanced communications—all through a common interface. In use today, hComms is comprised of two main components: hManager, for network planning and management, and hC2 for data sharing. hC2 SOFTWARE SUITE—COLLABORATE ACROSS ECHELONS Sharing data couldn’t be easier with the hC2 Software Suite. This complete command and control communications software solution connects all echelons—from headquarters to tactical edge—making critical information available where and when it’s needed with its four specialized products: hC2 Node Center, Command, Patrol and Dismount. The Harris hC2 Dismount RF-7800N-BM400 Tactical COP for dismounted commanders at the tactical edge is designed with operational simplicity in mind. The Android-based system provides a mobile, up-to-date COP and plan overlays to enhance force protection. Users can exchange informational layers, illustrate complex maneuvers, share with subordinates and spot report. Geofencing allows users to receive critical alerts about their surrounding areas. harris.com Specifications for: RF-7800N-BM400 hC2 DISMOUNT KEY FEATURES HARRIS hC2 COMMAND & CONTROL SOFTWARE COMPONENTS NODE CENTER COMMAND Common Operational Picture (COP) • • • • Layer management • • • • Friendly force tracking • • • • >Plan > sketching Situation awareness/situation reporting • • • • >Geofencing > Plan sketching • • • • Radio integration • • • • Terrain analysis • • Short text messages/structured messages • • >Android > platform hC2 SUITE FEATURES >Mobile > COP >Unit > reporting >Ergonomic > mode • • Planning and plan/order dissemination • • • Route management • ORBAT management • Task management • Holdings management ENHANCE THE POWER OF YOUR NETWORK, CONTACT HARRIS TODAY To learn more about how Harris software solutions can help you enhance the power of your network, contact us today: [email protected]. PATROL DISMOUNT • Presentation capabilities • Smart filters for data tracks • Manual track correlation • • Track type conversion • MIP 2, 3.0, and 3.1 interoperability 1) • 1) 1) NFFI, LINK-16, OTH-Gold interoperability • 2) 2) 2) 1) Can be achieved through connection with hC2 Command 2) Can be achieved through connection with hC2 Node Center MAP DATA Uses same compressed and optimized map format as hC2 Patrol. hC2 Command is able to extract map area onto the format supported by hC2 Dismount and hC2 Patrol (Clip and Ship capability). THE ANDROID BMS IS DESIGNED TO RUN ON DEVICES WITH THE FOLLOWING CONFIGURATION Android 4.0.3 or later Harris Corporation RF Communications Division 1680 University Avenue Rochester, NY 14610, USA 4” to 10” display hC2 Dismount provides a mobile COP for viewing on Android devices. 1 GB RAM 1.5 GHz processor Hardware buttons and touch input supported 585-244-5830 rf.harris.com harris.com This information was approved for all publishing per the ITAR as “basic marketing information of defense articles“ or as “advertising printed material” per the EAR. Specifications are subject to change without notice. © 2015 Harris Corporation 2/15 DS-573B