Coming Soon!
Shizuoka Hobby Show 2008
21062
21201
21202
21203
21204
12037
12038
24300
32559
32561
35292
35293
61102
61103
89771
89772
89773
12623
12624
12625
18625
15374
94659
94662
94663
69511
55101
57777
57778
23655
Table of Contents
1/12 Kawasaki KR500 ‘82 (Finished Model)
1/12 Repsol RC211V ‘06 Parts Panel
1/12 Konica Minolta RC211V ‘06 Parts Panel
1/12 Honda RC211V ‘06 Parts Panel
1/12 LCR Honda RC211V ‘06 Parts Panel
1/12 Lotus type 78 (w/Photo Etched Parts)
1/12 Porsche 935 “Martini” (w/Photo Etched Parts)
1/24 Nissan GT-R
1/48 U.S. Army Staff Car 1942
1/48 German Africa Corps Infantry Set
German Panzerkampfwagen II Ausf.A/B/C (Sd.Kfz121)
(French Campaign)
German Infantry Set (French Campaign)
1/48 F-16C [Block 32/52] “Thunderbirds”
1/48 Mitsubishi A6M5/5a Zero Fighter (Zeke)
1/35 Russian Tank Division Reconnaissance Team
w/Amphibious 1/4 Ton 4x4 Truck
1/35 U.S. Modern Infantry w/Accessory
1/48 F-117A Nighthawk and U.S. Modern 4x4 Utility Vehicle
1/24 Nissan GT-R Photo Etched Parts Set
1/48 Mitsubishi A6M Zero Fighter Detail Up Parts Set
1/16 1/35 German Military Insignia Decal Set
Dash-1 Emperor (MS Chassis)
Mini 4WD Pro Lightweight Center Chassis
Height Adjustable Roller w/FRP Mount
Aluminum WidePlate Set (Gold)
Aluminum Wide Pate Set (Pink)
Racing Mini 4WD Japan Cup Junior Circuit
Slope Sections Set (2pcs.)
Powerchamp FD
1/10 Expert Built Suzuki SX4 WRC (TT-01 Type-E Chassis)
1/10 Expert Built Volkswagen Golf GTI Cup Car
(TT-01 Type-E Chassis)
1/14 R/C Tractor Truck 3-Axle Reefer Semi-Trailer
(Factory-Finished w/Light Unit)
4950344210626
4950344212019
4950344212026
4950344212033
4950344212040
4950344120376
4950344120383
4950344243006
4950344325696
4950344325610
4950344352920
4950344352937
4950344611027
4950344611034
4950344897711
4950344897728
4950344897735
4950344126231
4950344126248
4950344126255
4950344186259
4950344153749
4950344946594
4950344946624
4950344946631
4950344997442
4950344551019
4950344577774
4950344577781
4950344236558
Coming Soon!
56321
48206
56026
58408
58409
58410
58411
42107
42116
42117
42118
42119
42120
42121
42122
42123
49496
84023
51337
51339
51340
xxxx
54032
54037
54038
54039
54040
54041
54045
54050
54051
54052
54053
54054
1/14 R/C Tractor Truck Scania R470 Highline Metallic Special
1/35 R/C German Panzerkampfwagen IV Ausf.J
1/16 R/C German Panzerkampfwagen IV Ausf.J w/Option Kit
1/10 R/C Suzuki SX4 WRC (TT-01 Type E)
1/10 R/C ARTA Garaiya (TB-03)
1/10 R/C Volkswagen Golf GTI Cup Car (TT-01 Type E)
1/10 R/C Nissan GT-R (TT-01 Type E)
1/10 R/C TB Evolution 5 MS Chassis Kit
3x10mm Blue Titanium Turn Buckle Shaft (2pcs.)
3x42mm Blue TItanium Turn Buckle Shafts (2pcs.)
3x45mm Blue Titanium Turn Buckle Shafts (2pcs.)
Wrench for Blue Titanium Turn Buckle Shaft
High Performance ESC Volac MS C3
1/10 R/C DF-03 MS
1/10 R/C FWD High Performance Racing Car M-03R
Chassis Kit (Blue Plated Version)
1/10 R/C Suzuki SX4 WRC Body Parts Set
1/10 R/C Volkswagen Golf GTI Cup Car Body Parts Set
1/10 R/C Nissan GT-R Body Parts Set
1/10 R/C F103RT (Type T) Body Parts Set (Tentative)
Anerobic Gel Thread Lock
DB01 Aluminum Suspension Mount (Front)
DB01 Aluminum Suspension Mount (Rear)
DB01 Aluminum Suspension Block (2pcs.)
DB01 Motor Heat Sink
DB01 Carbon Fiber-Reinforced Chassis
TA05-IFS R Drive Belt (342mm)
TA05-IFS R 18T Center One-Way Set
TRF501X/DB01 18T Center One-Way Set
TB-03 Aluminum Universal Propeller Shaft Set
TB-03 Aluminum Propeller Joint Set (Rear)
TB-03 Aluminum Motor Adaptor
4950344563210
4950344482061
4950344560264
4950344584086
4950344584093
4950344584109
4950344584116
4950344421077
4950344421169
4950344421176
4950344421183
4950344421190
4950344421206
4950344421213
4950344421220
4950344421237
4950344494965
4950344840236
4950344513376
4950344513390
4950344513406
4950344xxxxxx
4950344540327
4950344540372
4950344540389
4950344540396
4950344540402
4950344540419
4950344540457
4950344540501
4950344540518
4950344540525
4950344540532
4950344540549
Coming Soon!
54055
54056
54057
54058
54059
54060
49382
49389
49425
49426
49462
49463
49466
49471
49472
49494
49495
49499
84000
84001
84002
84003
84004
84005
84006
84007
84008
84009
84010
84011
84012
84013
84014
84015
84016
TB-03 04 Spur Gear (96T)
TB-03 Aluminum Dif Joint Set
TB-03 Front One Way Unit
TT-01E Aluminum Steering Set
TT-01E Front Carbon Damper Stay
TT-01E Rear Carbon Damper Stay
On Road Tune Hard Spring Set (White)
On Road Tune Hard Spring Set (Milky Blue)
TA05 Aluminum Differential Joint (Blue)
TRF415 Aluminum Differential Joint Set (Blue)
TA05 Urethane Bumper (Black)
TRF415 Urethane Bumper (Black)
M-03 Blue Plate Frame Set
TA05 Wide Pitch Front One-Way Pulley (36T Size/Black)
TA05 Wide Pitch Differential Pulley (36T Size/Black)
TB Evo V MS Screw Set (Titanium & Aluminum)
TRF416 2.5mm Lower Deck
TB-03 Titanium Screw Set
TA05 Center One-way Set (black)
TA05 Aluminum Motor Heat Sink (black)
TA05 Aluminum Center Plate (black)
TA05 Aluminum Motor Mount (black)
TA05 Aluminum Racing Steer Set (black)
TA05 -IFS Aluminum Rear Upper Light (0 degrees/black)
TA05 Alluminum Differential Joint (black)
46mm Lightweight Steering Shaft (black)
TRF Special Damper (Hard coat/black)
Turbo Down Retainer (black)
TA05 Lightweight Aluminum Servo Stay (black)
Aluminum Wheel Hub Clamp (5mm thick/black)
Battery Plate Aluminum Mount Screws (black)
5mm Aluminum Short Ball Nut (black)
5x5mm Aluminum Ball Connector (black)
5x8mm Aluminum Ball Connector (black)
Stabilizer Rod Stabilizer Bar (black)
4950344540556
4950344540563
4950344540570
4950344540587
4950344540594
4950344540600
4950344493821
4950344493890
4950344494255
4950344494262
4950344494620
4950344494637
4950344494668
4950344494712
4950344494729
4950344494941
4950344494958
4950344494996
4950344840007
4950344840010
4950344840021
4950344840030
4950344840045
4940344840052
4940344840060
4940344840076
4950344840083
4950344840090
4950344840106
4950344840113
4950344840120
4950344840137
4950344840144
4950344840151
4950344840168
Coming Soon!
84017
84018
84019
84020
84021
84022
84025
84026
84027
84028
74080
74532
87098
89912
71121
71122
71123
Aluminum Stabilizer End (black)
Carbon D Stay Setting Spacer (black)
3x10mm Aluminum Turn Buckle Shaft (black)
TRF416 Lower Deck for Stick Type Battery
F350 Axle Parts Set
Super Clod Buster Axle Parts Set
TLT-1 Axle Parts Set
Craft Tweezers
Tamiya Spray Work HG Airbrush III
Tamiya Weathering Master E Set. Dry Brush Effect,
Yellow, Grey, Green.
Iridescent Blue / Green
2-Legged Walking Robot w/Wind-Up Generator
4-Legged Walking Robot w/Wind-Up Generator
Sumo Wrestler Robot w/Wind-Up Generator (Tentative)
4950344840175
4950344840182
4950344840199
4950344840205
4950344840212
4950344840229
4950344840250
4950344840267
4950344840274
4950344840281
4950344740802
4950344745326
4950344870981
4950344899128
4950344711215
4950344711222
4950344711239
Highly Confidential Items.
94660
94661
49497
Thunder Shot Mk.II Pink Special
MS Chassis Type R
1/8 Glow Engine R/C 4x4 Racing Truck TRF801XT
4950344946600
4950344946617
4950344494972
Previous Announced Items
14111
12622
60401
56709
23211
1/12 Kawasaki ZZR 1400
1/350 Crew Set (144 pcs.)
1/100 Space Shuttle Orbiter
1/12 TamTech Gear Porsche 935 “Martini”
Ferrari GTO (Semi Assembled Premium Model)
4950344141111
4950344126224
4950344986842
4950344567096
4950344232116
Coming Soon!
Confidential Until May 15th
FINISHED MODELS
21062 1/12 Kawasaki KR500 ‘82 (Finished Model)
Verwacht 2008 Q3
Image shows assembly kit model
Riding on the back of the two time 250cc and two time 350cc World Champion Kork Ballington’s
riding skills, Kawasaki debuted in the 500cc Road Race Championship in 1980. He raced on a
KR500 works machine which had an aluminum monocoque frame. It had a 498cc water-cooled
square-four engine, and an independent rear unit suspension.
About the Model
- This is a 1/12 scale finished model of Grand Prix World Champion rider Kork Ballington’s
#8 1982 Kawasaki KR500.
- The die-cast in the engine adds to the weight of the bike.
- AS and ABS resin are used for a strengthening the model.
- Packaging features clear window to enable display of the model even while inside the box.
- Has top quality pad-printed markings.
- Comes in a different 1980’s lime green color than the recent 1/12 Kawasaki Ninja ZX-RR
‘06 #56 (21066).
Coming Soon!
PARTS PANEL (MASTERWORK COLLECTION)
21201 1/12 Repsol RC211V ‘06 Parts Panel
Verwacht 2008 Q4
21202 1/12 Konica Minolta RC211V ‘06 Parts Panel
Verwacht 2008 Q4
21203 1/12 Honda RC211V ‘06 Parts Panel
Verwacht 2008 4
21204 1/12 LCR Honda RC211V ‘06 Parts Panel
Verwacht 2008 Q3
Image shows drawing
The parts panel for the above corresponding RC211V ‘06 motorcycles would be a beautiful
edition to anyone’s model collection, exhibit, or living room wall. Every single detailed part of
the chosen 1/12 Masterwork motorcycle has been carefully displayed on this beautifully designed panel. The panel has wood frame and an acrylic cover which beautifully matches its
contents. It also has an Aluminum nameplate with metal transfers adding to the quality finish of
this exquisite Parts Panel.
Coming Soon!
STATIC MODELS
12037 1/12 Lotus type 78 (w/Photo-Etched Parts)
Verwacht 2008 Q3
*Image shows drawing
Lotus was the pioneering racing team that invented the wedge-shaped body, with inverted aircraft-like wings to achieve a greater down force effect that considerably improved handling and
performance. In 1977, when it first appeared on the racing circuit, Lotus won 5 races but missed
out on the championship. But the following year in 1978, and in 1979 they won the titles with
dominating performances. The inverted wing was used in the early stages in 1978 but they
made the switch full-time in the 1979 season. The specifications are for the 1977 British GP,
and the Olympus logo on the side of the car are the specifications for the spare car.
About the Model
- Re-release of the popular big scale Lotus Type 78 F1 race car with new photo-etched parts.
- Photo-etched parts include brake discs, radiator, 2 types of front and rear wing tips, and
seatbelts for adding extra finishing details.
- Cloth seatbelts are also included.
- Comes in a newly designed package.
Coming Soon!
12038 1/12 Porsche 935 “Martini” w/Photo-Etched Parts
Verwacht 2008 Q3
*Image shows prototype
The Porsche 935 racing model based on the 930 turbo and was developed in accordance with
the FIA Group 5 rules. It had a turbocharger made by KKK, and a flat-6 2857cc motor which had
a maximum output of 590ps. At the 1976 World Championships, it was involved in all seven
races. At first, they recorded overwhelming victories in races throughout the world. Later there
was an intercooler problem which led to a troubled season for Porsche, but they were able to
win the championship in the end.
About the Model
- This is a fully-detailed 1/12 scale assembly kit.
- Front and rear hoods, as well as the doors can all be opened to reveal the detailed engine
bay and interior.
- The photo-etched parts and metal transfer set bring out the unique characteristics of the
Porsche.
- The suspension is also accurately reproduced. Combine this with the photo-etched brake
discs for greater realism.
- The seatbelt, which has not been reproduced until now, can be depicted with both photoetched and cloth parts.
Coming Soon!
24300 1/24 Nissan GT-R
Verwacht 2008 Q3
Image shows drawing
At the 2007 Tokyo Motor Show, much attention was paid to the new Nissan “multi-performance
sports car.” This model had dropped name Skyline and became simply the Nissan GT-R. Along
with the name change, the car also had some other mechanical changes, especially under the
hood. Gone is the straight six, and in its place there is a new twin-turbo V6, which has an amazing 480 horse power with 60kg of torque. With amazing speed and cornering ability, the GT-R
has reached the super car plateau.
About the Model
- 1/24 scale assembly kit of the Nissan GT-R. Length 197mm Width 82mm.
- Muscular body styling has been accurately reproduced thanks to a detailed study of the
actual car.
- The hood can be opened and closed.
- Highly-detailed engine and separately-molded parts for the induction box.
- Wheels, muffler, and induction box parts have been metal plated for an eye-catching finish.
Coming Soon!
32559 1/48 1942 U.S. Army Staff Car Model 1942
Verwacht 2008 Q3
Image shows drawing
During WWII, the U.S. Military used various makes of civilian cars as military staff cars. At this
time, the U.S. Military mostly used the 1942 sedan for this purpose. This 4.9m long sedan was
powered by a 90hp, 6-cylinder 3700cc motor. This sedan was widely used as a Staff Car for
high-ranking officers and as transport for aviators.
About the Model
- Data for the modeling the U.S. Army Staff Car was taken from an actual vehicle at the Minnesota Aviation Museum.
- From the large compilation of photos, the shape of the vehicle was accurately reproduced.
- The chassis is made of die-cast metal which adds to the model’s feeling of weight.
- A new driver figure comes supplied with the model.
- You are able to add this Staff Car with other 1/48 Military Miniature Series figures and
vehicles such as the M4 Sherman tank and the M26 Pershing tank for diorama creation.
- Also, by combining the Staff Car with fighter planes such as the P-51D and P-47 you can
really assemble an exciting airfield diorama.
Coming Soon!
32561 1/48 German Africa Corps Infantry Set
Verwacht 2008 Q3
Image shows drawing
At the beginning of WWII, the Italian army invaded and attacked Egypt but received severe
defeats from British-led counterattacks. Due to this, Field Commander Rommel was sent to
North Africa to save the situation. It was decided that two German divisions would support their
Italian counterparts in the invasion of English-held Egypt, which resulted in a complete and utter
defeat for the defending English forces. Always commanding from the frontlines, Rommel and
his African Corps chased the British troops, eventually cornering them at the Egyptian border.
With Rommel’s success, he was both respected and feared by the English-led forces and was
called “the Desert Fox” for his skillful desert campaigns.
About the Model
- Set includes 8 soldier figures with a variety of realistic expressions.
- The tent, which comes with this set, has a cloth like feel and a lifelike sag effect.
- The set comes together with parts for accessories such as a wireless radio and battery.
- Parts for jerry cans, fuel drums, and wooden crates also included to liven up the surroundings.
Coming Soon!
35292 1/35 German Panzerkampfwagen II Ausf. A/B/C (Sd.Kfz. 121)
(French Campaign)
Verwacht 2008 Q3
Image shows full-size vehicle
After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I’s hull and came armed with a
2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II
tanks were manufactured. They led the surprise invasion on Poland and were the main tanks
used in the attack on France. Later, they were successfully used in reconnaissance missions
until the end of the war.
About the Model
- 1/35 model of the German Panzerkampfwagen II tank.
- Supplemental armor plate parts can be installed in the same manner as the actual tank.
- Various hatches throughout the tank are separately-molded, and armor panels are included
to accurately recreate the different variants.
- Assembly-type tracks feature single-piece sections for effortless construction.
- Comes with a commander figure and three kinds of markings for the French campaign.
- Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis,
French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry
Set (French Campaign) to create dioramas of the early WWII battlefield.
Coming Soon!
35293 1/35 German Infantry Set (French Campaign)
Verwacht 2008 Q3
Image shows drawing
During WWII, the German combat uniform included a distinctively-shaped helmet which had a
stretched neckline for added protection. The M36 combat uniform was an overall field gray color
with a dark green collar, and featured four front pockets. The German soldiers also wore long
black boots along with this basic uniform. At parades, the German soldiers would lift their legs
high without bending their knees and perform the intensively impressive “Goose Step March.”
About the Model
Set includes 5 figures to depict German infantry in early-WWII.
- A soldier carrying an MP40 in both hands (can also be modeled to hold a rifle).
- A soldier in kneeling position preparing to fire his rifle. (can also be modeled to be holding
binoculars).
- A marching soldier carrying his rifle on his shoulder (can also be modeled to be holding an
MP40).
- A soldier in prone position with his MG34 machine gun (Accessories that correspond with
the MG42 are also included).
- The ammo bearer who is feeding the ammunition from the ammunition case.
- All five soldier figures come with new helmets (2 of which come with camouflage belts).
- Also included are two mounting plates for the figures and a wide array of accessories to
enable a variety of poses and equipment.
Coming Soon!
61102 1/48 F-16C [Block 32/52] “Thunderbirds”
Verwacht 2008 Q3
In 1953, the Thunderbirds were formed as an Air Demonstration Squadron. From 1984 the
F-16A was used, but in 1992 they had changed to the F-16C model. Every year from March
through to November, the Thunderbirds perform about 40 times at various air shows throughout
the world and America. Through these aerobatic performances, the Thunderbirds do the publicity work of the American Air Force, promoting international friendship. In November 2007, it was
decided to put the new Block 52 F-16 into use as of 2009, instead of the Block 32 F-16.
About the Model
- In addition to the already in use Block 32 F-16, you can assemble a Block 52 as well.
- Smoke generator pipe is attached to the jet nozzle, just like the actual aircraft, and an exclusive newly-developed pilot figure is included.
- Crisply recreated markings allow depiction of the colorful Thunderbirds livery.
- The 60 year anniversary decals are also included.
- In addition to the 2007 specifications, Block 52 No.1 markings are also prepared.
Coming Soon!
61103 1/48 Mitsubishi A6M5/5a Zero Fighter (Zeke)
Verwacht 2008 Q3
Image shows drawing
At the beginning of the Pacific War, the Zero was an excellent fighter plane. As the war progressed, Model 21, 22, and 32 were introduced and all received numerous improvements such
as greater speed and armor reinforcement. During the Pacific War, the Zero was the main
fighter plane of the Japanese Navy. The Model 52 continued fighting and appeared in the Solomon
Islands in 1943. The wingspan was designed 50cm shorter and in a semicircular shape, different than its Model 22 counterpart. With the improvements of the plane’s balance, speed, armor
reinforcement, maneuverability, and cruising speed, it resulted in an excellent fighter. The Model
52 Zero took part in the battle at the Mariana Islands, Iwo Jima, and Okinawa, and continued to
support the Navy and land forces at the frontlines until the end of the war.
About the Completely New Model
- The Model 52 featured additional wing-mounted machine guns with belt-feed system. The
Model 52 kou, with greater ammunition load can also be depicted.
- Parts for the Model 52 kou’s lengthened spinner, main wing panels, gun covers, and external
fuel tank are also included to enable accurate reproduction.
- The main wing flaps can be set in an up or down position.
- A removable 300 liter metal belly tank is included.
- The one-piece engine cowl is made from precision-crafted plastic, and cowl flaps can be
posed in opened or closed positions.
- There are 2 types of markings for the Model 52, and 1 kind of marking for the Model 52 kou.
- 4 pilot figures in various lifelike poses also included.
Coming Soon!
LIMITED EDITION STATIC MODELS
89771 1/35 Russian Tank Division Reconnaissance Team w/Amphibious
LIM
1/4 Ton 4x4 Truck
ITE
Verwacht 2008 Q3
D
ED
ITI
ON
During WWII, U.S. manufacturers developed the 1/4 ton 4x4 amphibious truck. The U.S. Military
and Navy widely deployed it, and at the same time several thousand of them were given to the
Russians. In Russian service, the amphibious truck played a part in many fording operations
including at the Oder river, and proved itself to be very reliable. It was used right up until the
Berlin Offensive Operation in May 1945.
About the Model
- In this release of the 1/4 ton 4x4 Amphibious Truck, Russian decals, including ones for various Russian slogans are included.
- Also included are 2 American soldier figures and decals for U.S. markings.
- It is possible to assemble the model to create a truck in American specifications.
- Comes with four Russian soldiers in relaxed lifelike poses, made by ICM.
Coming Soon!
89772 1/35 U.S. Modern Elite Infantry w/Accessory
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
The 1991 Gulf War was the first international dispute following the Cold War. In January 1991,
following the August 1990 Iraqi invasion of Kuwait, and the build up of multi-national military
forces, “Desert Storm” began with the bombing of Iraq. In February, Iraqi military forces fled
Kuwait under the “Desert Sword” battle plan, and on March 3, under a provisional cease fire
agreement, the war was officially over. The Gulf War had attracted much attention due to the use
of high tech weaponry such as the stealth bomber and Patriot missiles, but it was the ground
troops that had ensured victory for the multi-national force.
About the Model
- There are four American infantry figures in the set.
- The soldiers are wearing PASGT body armor and M88 helmets.
- The soldiers are in a variety of cautious poses, armed with M60 and M16A machine guns.
- The highly detailed figures are produced by ICM, Ukraine.
- Set includes:
*M60E3 machine gun and a M249 light machine gun
*Stinger anti-air missile
*Ammunition and shell cases
*Field operations and food provisions carton sheet.
- Furthermore, two camouflaged tank driver figures (one full figure, one torso) are included.
- You can use this set as a small diorama, or add it with the Abrams tank and other figures to
create a larger diorama.
Coming Soon!
89773 1/48 F-117A Nighthawk and U.S. Modern 4x4 Utility Vehicle (Tentative)
LIM
Verwacht 2008 Q3
ITE
D
ED
ITI
ON
Image shows box art
With the new combination packaging of the F-117A and the U.S. Modern 4x4 Utility Vehicle,
model builders will get a set with terrific value. During the Gulf War, the F-117A was based at
the King Khalid International Airport in Saudi Arabia, which was under the constant protective
eye of the Modern 4x4 Utility Vehicle. The box art of the package shows an image which
reflects the tension of the situation in those times.
About the Model
- This is a 1/48 scale model set that includes the U.S. Modern 4x4 Utility Vehicle, which was
previously released as a 1/35 miniature military model.
- The rubber tires come realistically reproduced with tread patterns.
- Doors can be set in an open or closed position.
- Dashboard and interior are realistically reproduced.
- The upper part of the vehicle has a highly placed ring mount for the gunner.
- Comes with a 1/48 scale M60 machine gun.
- Included are two military figures.
- Also included are 3 kinds of markings for units that took part in the Gulf War.
Coming Soon!
DETAIL UP PARTS
12623 1/24 Nissan GT-R Photo-Etched Parts Set
Verwacht 2008 Q3
Image shows drawing
Use these precision-made photo-etched parts to add even more exquisite detail to your GT-R
for the ultimate realistic finish.
About the Set
This set includes the following:
- Front grill mesh
- Front bumper air scoop mesh
- Rear bumper air duct mesh
- Front and rear brake discs
- Steering column paddle shifter
- Intercooler
- Fuel filler cap
- Accelerator pedal
- Brake pedal
- Foot rest
- Two kinds of license plates
- Name plate
- A metal muffler tip.
Coming Soon!
12624 1/48 Mitsubishi A6M Zero Fighter Detail Up Parts Set
Verwacht 2008 Q3
Image shows drawing
Assemble your 1/48 Mitsubishi A6M Zero Fighter (Zeke) with this high-quality detail up parts
set. These extra finishing touches will really add to the display presence of your model.
About the Set
- The pitot tube is made of stainless steel.
- Metal 20mm cannon barrels have a realistic black-colored finish.
- Parts included for seat belts to add more detail to the cockpit.
- Included wheel chocks are perfect for use in an airfield or flight deck diorama.
Coming Soon!
12625 1/16 1/35 German Military Insignia Decal Set
Verwacht 2008 Q3
No image available
Use these easy-to-use German Military Insignia decals to add even more exquisite detail to
your WWII German military figures. These are designed with the modeller in mind to save time
and stress allowing for a more realistic finish.
Coming Soon!
RADIO CONTROL VEHICLES
57777 1/10 Expert Built Suzuki SX4 WRC (TT-01 Type E Chassis)
Verwacht 2008 Q3
About the SX4 WRC
The SX4 is Suzuki’s latest entry to the World Rally Championship. Taking the compact 5-door
hatchback as a base, Suzuki gave the car WRC-spec modifications including wider body, new
suspension and transmission, a 4WD system, and a 300hp turbocharged 2-liter engine. After
undergoing some preliminary tests during the 2007 season, the team and its cars made their full
debut in 2008. Driven by Toni Gardemeister and Per-Gunnar Andersson, the SX4 finished in the
points during its first race, the Monte Carlo Rally.
About the Model
- Newly evolved TT-01 type E chassis.
- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater
strength.
- New front and rear uprights are also made from durable fiberglass-reinforced resin.
- Improved steering linkage design features TA05 steering posts for sharper steering response.
- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level racespec machines.
- Upper deck also features a convenient transponder mount to further encourage fans to go to
their local track and experience R/C racing.
- New-mold 1.0mm SX4 WRC body made from lightweight polycarbonate material.
- Injection-molded side mirrors and rear wing provide crisp detail.
- Includes ESC (TEU-101BK), Type 540 motor, and 2-channel R/C system and front and rear
LED lights.
- 7.2V battery and charger separately required.
- Wide variety of Option Parts are separately available to customize your machine.
Coming Soon!
57778 1/10 Expert Built Volkswagen Golf GTI Cup Car (TT-01 Type E)
Verwacht 2008 Q3
Image shows drawing
About the Golf GTI Cup Car
The Golf GTI Cup is a one-make race series organized by Volkswagen Group Japan. The races
feature Golf GTI cars which have been modified and outfitted for track use. These modifications
include 4-point seatbelts, roll cage, and DSG (Direct Shift Gearbox). Owners also apply colorful
liveries to set their car apart from the others. The series has 5 races throughout Japan, and
encourages both seasoned racers and amateurs to go out and participate.
About the Model
- Newly evolved TT-01 type E chassis.
strength.
- New-mold 1.0mm SX4 WRC body made from lightweight polycarbonate material.
- Includes ESC (TEU-101BK), Type 540 motor, and 2-channel R/C system and front and rear
LED lights.
- 7.2V battery and charger separately required.
Coming Soon!
56321 1/14 R/C Tractor Truck Scania R470 Highline Metallic Special
Verwacht 2008 Q3
Image shows prototype
Since the introduction of the Tractor Truck Scania R470 Highline, sales have continued
favorably. This time, we are adding a special metal plated version of the R470 to the other
four R/C tractor trucks in its line. Like in previous sales of imported and domestic kits, it
comes fully operational with a 4 channel transmitter and a MFC-01 unit.
About the Model
- Length: 452mm, Width: 187mm, Height: 293mm, Wheelbase 272mm.
- The motor and transmission are in the frontal part of the chassis which has a metal ladder
frame and it drives just like the real thing.
- Has a metal leaf spring suspension.
- 4 channel transmitter not included.
Coming Soon!
48206 1/35 R/C German Panzerkampfwagen IV Ausf.J
Verwacht 2008 Q3
Image shows drawing
Following the Panther Type G, the next 1/35 scale R/C tank release is the Panzer IV Ausf.J. Not
only does it feature all the sharp details of a static model, the new radio control system gives the
tank an extra dimension for another level of enjoyment.
About the Panzer IV Ausf.J
The Panzer IV was the workhorse of the German army and remained in production throughout
the entire war thanks to constant improvements. Due to its low cost and high reliability, production
of the Panzer IV continued even after more effective tanks like the Panther entered service. The
last of the series, the Ausf.J, was armed with an L/48 75mm gun and less components to simplify
construction.
About the Model
- 1/35 R/C German Panzerkampfwagen IV Ausf.J assembly kit.
- New parts for lower hull to enable installation of running gear and internal mechanisms.
- Assembly-type caterpillar tracks provide realistic tank movement and can be adjusted by using
a tensioner made from durable die-cast metal.
- Compact gearboxes with 0.4 gear modules and turret/gun gear unit are pre-assembled.
- FM27MHz R/C system enables forward/reverse, right/left turning, pivot turning, turret rotation,
and gun elevation, all controlled via push-button type transmitter.
- Convenient battery compartment access hatch on lower hull enables easy battery replacement.
- 1 006P(9V)/6F22 alkaline battery for transmitter and 4 R03/AAA/UM4 alkaline batteries for
tank separately required.
Coming Soon!
56026 1/16 R/C German Panzerkampfwagen IV Ausf.J
w/Option Kit
Verwacht 2008 Q3
Image shows drawing
Following the Jagdpanther tank destroyer, Tamiya is further expanding the 1/16 scale R/C tank
lineup with the Panzer IV Ausf.J. This widely-used medium tank would look fantastic alongside
the previously released Tiger I, King Tiger, Panther, and Jagdpanther tanks.
About the Panzer IV Ausf.J
The Panzer IV was the workhorse of the German army and remained in production throughout
the entire war thanks to constant improvements. Due to its low cost and high reliability, production
of the Panzer IV continued even after more effective tanks like the Panther entered service. The
last of the series, the Ausf.J, was armed with an L/48 75mm gun and less components to simplify
construction.
About the Model
- 1/16 R/C German Panzerkampfwagen IV Ausf.J assembly kit.
- Distinctive stepped hull of the tank is accurate reproduced.
- Dual gearboxes can operate together or individually for realistic tank movement.
- Includes DMD Control Unit (T-03) and DMD Multi-Function Unit (MF-01) to put turret rotation,
gun elevation/depression, and realistic light and sound action at your fingertips.
- Onboard speaker reproduces realistic engine sounds.
- Main gun and machine gun firing accompanied by LED flashes for greater realism.
- Install ITEM 53447 1/16 R/C Tank LED Battle System (sold separately) for exciting 1v1 or team
battles with other similarly equipped Tamiya R/C tanks.
- 4-channel R/C system, 7.2V battery and charger are separately required.
Coming Soon!
58408 1/10 R/C Suzuki SX4 WRC (TT-01 Type E)
Verwacht 2008 Q3
About the SX4 WRC
The SX4 is Suzuki’s latest entry to the World Rally Championship. Taking the compact 5-door
hatchback as a base, Suzuki gave the car WRC-spec modifications including wider body, new
suspension and transmission, a 4WD system, and a 300hp turbocharged 2-liter engine. After
undergoing some preliminary tests during the 2007 season, the team and its cars made their full
debut in 2008. Driven by Toni Gardemeister and Per-Gunnar Andersson, the SX4 finished in the
points during its first race, the Monte Carlo Rally.
About the Model
- Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.
strength. These parts are now also separately molded to enable easier maintenance.
- New-mold SX4 WRC body made from lightweight polycarbonate material.
- Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and
rear light cases.
- 2-channel R/C system, 7.2V battery and charger separately required.
Coming Soon!
58409 1/10 R/C ARTA Garaiya (TB-03)
Verwacht 2008 Q3
Image shows drawing
About the ARTA Garaiya
Autobacs Racing Team Aguri re-entered their modified ASL Garaiya in the GT300 class of the
2007 Japan Super GT series to commemorate the 10th anniversary of ARTA. With the veteran
driver duo of Morio Nitta and Shinichi Takagi at the wheel, the team showed early promise to
take 1st place at Round 3 Fuji Speedway, and went on to finish a respectable 4th place in the
season’s overall standings.
About the Model
- The new TB-03 chassis is totally improved upon its predecessor the TB-02.
- Bathtub frame comes with a motor cooling duct to improve heat dissipation for better
performance.
- In-board Front Suspension system features horizontally-mounted front dampers to enable a
low-nose profile to mount the new-mold aerodynamic polycarbonate body shell.
- The body shell is also compatible with TA05-IFS chassis
- Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a
breeze.
- Equipped with front and rear ball differentials for greater power transmission efficiency.
- Race-proven reversible short suspension and TRF416 front and rear knuckles.
- Includes body, wheels, tires, and Type 540 motor.
- ESC, 2-channel R/C system, 7.2V battery and charger separately required.
Coming Soon!
58410 1/10 R/C Volkswagen Golf GTI Cup Car (TT-01 Type E)
Verwacht 2008 Q3
Image shows drawing
About the Golf GTI Cup Car
The Golf GTI Cup is a one-make race series organized by Volkswagen Group Japan. The races
feature Golf GTI cars which have been modified and outfitted for track use. These modifications
include 4-point seatbelts, roll cage, and DSG (Direct Shift Gearbox). Owners also apply colorful
liveries to set their car apart from the others. The series has 5 races throughout Japan, and
encourages both seasoned racers and amateurs to go out and participate.
About the Model
- New-mold Golf GTI body made from lightweight polycarbonate material.
- Stylish silver 10-spoke wheels and sticker set to replicate actual car’s markings included.
rear light cases.
Coming Soon!
58411 1/10 R/C Nissan GT-R (TT-01 Type E)
Verwacht 2008 Q3
Image shows drawing
About the GT-R
After starting life as a concept car in 2001 and moving to the prototype stage in 2005, the world
was treated to the debut of the Nissan GT-R at the 2007 Tokyo Motor Show. Powered by a
3,799cc twin turbo DOHC V6 engine producing 480hp, this new GT-R has become the fastest
production car to lap Germany’s famous Nurburgring. Yet this high-performance super car is
also comfortable for everyday driving situations and meets tougher environmental regulations
as well in order to live up to Nissan’s label of “multi-performance” super car.
About the Model
- New-mold GT-R body made from lightweight polycarbonate material.
- Injection-molded side mirrors and rear wing provide crisp detail. New wheels feature +2 offset.
rear light cases.
Coming Soon!
TRF SERIES
The following TRF series parts have been produced with your vehicle in mind. Not only will they
add to your vehicles performance, they will also increase your driving pleasure.
42107 1/10 R/C TB Evolution 5 MS Chassis Kit
Verwacht 2008 Q3
Images show prototype
The ultimate shaft-driven 4WD chassis in the TB Evolution Series, the TB Evolution 5, has been
further tuned and refined to become this limited edition TB Evolution 5 MS.
About the Model
- Race-spec 1/10 R/C TB Evolution 5 MS chassis kit.
- Features TRF416-style steering and suspension systems.
- New motor layout sees motor mounted further forward to improve handling characteristics and
make spur gear changes much easier.
- Durable aluminum diff. joint is capable of harnessing the power from even high-output motors.
- Protective covers over the swing shaft connection ensures smooth and unobstructed operation.
- Front part of lower deck is made from durable nylon material and is mounted with a small-size
bumper that reduces interference with road in case of a roll.
- Reversible-type suspension features short-span suspension arms, enabling minute settings
adjustments.
- 2-channel R/C system with ESC, motor, body, tires, battery pack and charger all separately
required.
Coming Soon!
42116 3x10mm Blue Titanium Turn Buckle Shaft (2pcs.)
Verwacht 2008 Q3
Verwacht 2008 Q3
Verwacht 2008 Q3
Verwacht 2008 Q3
Verwacht 2008 Q3
Verwacht 2008 Q3
42122 Wrench for Blue Titanium Turn Buckle Shaft
Verwacht 2008 Q3
Coming Soon!
42123 High Performance ESC Volac MS C3
Verwacht 2008 Q3
Images show prototype
The Volac ESC Volac MS was released in 2004 was well-liked by the R/C racing crowd thanks
to its high-performance and user-friendliness. A new model of this ESC is now being released
with quite a few improvements.
About the Volac MS C3
- Features the same physical size as the Volac MS, but is 18.8g lighter for greater weight savings.
- Comes in a stunning metallic blue color with a special plate designed by TRF driver Satoshi
Maezumi.
- Compatible with frequencies from 900Hz to 12kHz (KO Propo setting adapter may be needed).
- ESC is programmed with input from TRF driver Satoshi Maezumi for a special default setting.
Coming Soon!
LIMITED EDITION RADIO CONTROL VEHICLES
49496 1/10 R/C 4WD High Performance Off Road Racer DF-03MS LIM
ITE
Verwacht 2008 Q3
D
ED
ITI
ON
Image shows prototype with markings
The mid-range 4WD off-road platform DF-03 now gets the full race-spec treatment to bring out
its hidden potential. This limited edition buggy features a chassis that is loaded with performanceenhancing parts and a Dark Impact body shell with special markings designed by TRF driver
Satoshi Maezumi.
About the Model
- DF-03 chassis kit is loaded with the following parts to boost performance:
53791 DF-02 Assembly Universal Shaft
53924 DF-03 Heat Sink Bar Set
53925 DF-03 Slipper Clutch Set
53926 DF-03 Aluminum Damper Set
53931 DF-03 Center One-Way Set
53940 DF-03 Hard Turnbuckle Shaft Set
53941 DF-03 Aluminum Turnbuckle Steering Rod
53948 DF-03 Aluminum One-Piece Propeller Cup Joint
53949 DF-03 Lightweight Battery Stopper Pin
53984 Buggy Racing Wing
51000 Hi-Torque Servo Saver (Black)
- Front and rear white-colored large dish wheels and white damper springs match the special
TRF Satoshi Maezumi color scheme.
- 2-channel R/C system with ESC, motor, tires, 7.2V battery and charger are separately required.
Coming Soon!
55101 Power Champ FD
Verwacht 2008 Q3
At intense Mini 4WD competitions, the demands on batteries are much, requiring a battery
that can keep up with the pace. The new Powerchamp battery has the high power which is
perfect in coping with the demands of the ever increasingly faster Mini 4WD races. The FD
logo is a metallic red color which stands out showing that when you run your Mini 4WD with a
Powerchamp battery, your vehicle will run red hot!
Please note:
- There are two batteries in each blister pack.
- There are 100 units in a carton.
- Dry cell alkaline R6/AA/UM3 batteries.
Coming Soon!
TOOLS, PAINTS, & FINISHING MATERIALS
74080 Craft Tweezers
Verwacht 2008 Q3
About the Craft Tweezers
- These are craft tweezers that are most suitable for papercraft work.
- The foremost part has an original Tamiya design.
- The design helps improve effectiveness in gluing and the bending of the paper, as well as
the drying process.
- It can also be used with the application of stickers and decals.
- Length: 140mm, has a SUS410 stainless hairline finish.
Coming Soon!
74532 Tamiya Spray Work HG Airbrush III
Verwacht 2008 Q3
Image shows drawing
This HG airbrush has a new 0.3mm nozzle and also comes with a newly designed trigger making it a more comfortable, easy to use tool. The airbrush uses a double action which allows for
better control of the spray painting action making for a more beautiful paint job. This is a must
have tool for all modeling enthusiasts.
Coming Soon!
87098 Tamiya Weathering Master E Set Dry Brush Effect, Yellow, Grey, Green.
Verwacht 2008 Q3
Image shows drawing
This set is an essential tool for adding the final touches of detail for combat vehicles such as
tanks. It is easy to apply and comes in three colors yellow, grey and green which will add to the
modeling pleasure. The yellow can be used with WWII German vehicles instead of dark yellow.
The grey comes in handy with German-grey colored vehicles and Japanese warships. And finally, green finishes off the set which is great for Allied forces vehicles which often used olivedrab and dark green colors.
Coming Soon!
89912 Iridescent Blue / Green
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
Image shows drawing
When viewing your model from different angles, you will notice different colors thanks to the
iridescent characteristics, and through special painting techniques you will be able to produce
realistic aging effects. Using the metallic like blue and green colors on R/C cars will definitely be
eye-catching at the track.
Coming Soon!
ROBOCRAFT SERIES
71121 2-Legged Walking Robot w/Wind-Up Generator
Verwacht 2008 Q4
71122 4-Legged Walking Robot w/Wind-Up Generator
Verwacht 2008 Q4
71123 Sumo Wrestler Robot w/Wind-Up Generator (Tentative)
Verwacht 2008 Q4
Tamiya presents its next Robocraft Series items, the 2-legged and 4-legged walking robot and
the Wrestling robot. These robots are powered by a hand held wind-up generator which powers
the moving parts making these robots walk. Legs and body parts employ transparent-colored
parts, giving a cool look. Assembly is very simple with use of screws and snap-lock parts.
Coming Soon!
84023 1/10 R/C M-03R Chassis Kit (Blue Plated Version)
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
This M-03R Chassis is blue plated and it is possible to choose from three wheelbase types for
your vehicle. Has 60D radial tires, black Suzuki Swift wheels, front and rear aluminum uprights
(M-03R), Aluminum Servo Mount (M-03R), Clear blue CVA Super Mini Dampers (M-03R), special all white TRF Damper shot soft to hard springs (M-03R), and a blue anodized aluminum
heat sink.
Coming Soon!
SPARE PARTS FOR RADIO CONTROL VEHICLES
51337 1/10 R/C Suzuki SX4 WRC Body Parts Set
Verwacht 2008 Q3
No picture available
This set includes an accurately reproduced poly carbonate body for the Suzuki SX4 WRC
Racing car. Comes with a light case for seperately available front and rear LED lights. The
most light connections: 5mm LED (four lights), 3mm LED (six lights).
About the Model
- The body is polycarbonate. t=1.0mm no holes
- H/J parts (mirror/light case): ABS Yellow light case, one side is plated
- Comes with sticker and masking seal and metal fittings.
- Can be used with the excellent TT-01 chassis. (It meets the short wheel base specifications)
Coming Soon!
51339 1/10 Volkswagen Golf GTI Cup Car Body Parts Set
Verwacht 2008 Q3
This set includes an accurately reproduced poly carbonate body for the Volkswagen Golf GTI
Cup Car. Comes with a light case for seperately available front and rear LED lights. The
most light connections available with the set: 5mm LED (four lights), 3mm LED (four lights).
About the Model
- H/J parts (mirror/light case): ABS Yellow silver light case, one side is plated
Coming Soon!
51340 1/10 R/C Nissan GT-R Body Parts Set
Verwacht 2008 Q3
This set includes an accurately reproduced poly carbonate body for the Nissan GT-R . Comes
with a light case for possible front and rear LED lights. The most light connections available
with the set: 5mm LED (four lights), 3mm LED (four lights).
About the Model
- H/J parts (mirror/light case): ABS Yellow silver light case, one side is plated
Coming Soon!
xxxxx1/10 R/C F103RM (Type T) Body Parts Set (Tentative)
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
No image available
This is the new spare body great for F1 R/C cars having its own unique body design. This
spare body is designed for those who would like to express their individuality through their
R/C car, and for those who believe that they can do a better job at designing cars than the
pros! When you have produced your own customized body, not only you will be the envy of
your friends, but your car will definately turn heads at the race course.
Coming Soon!
OPTION PARTS FOR RADIO CONTROL VEHICLES
New Option Parts will soon be available to reinforce your belt-driven 4WD DB01 machine and
make it even more indestructible.
54032 Anaerobic Gel Thread Lock
Verwacht 2008 Q3
Tamiya is now releasing a new easiy applied screw lock gel for helping in the prevention of
looseness in metal parts in R/C vehicles. It can also be applied on chassis’ as well engines.
54037 DB01 Aluminum Suspension Mount (Front)
Verwacht 2008 Q3
54038 DB01 Aluminum Suspension Mount (Rear)
Verwacht 2008 Q3
54039 DB01 Aluminum Suspension Block (2pcs.)
Verwacht 2008 Q3
54040 DB01 Motor Heat Sink
Verwacht 2008 Q3
54041 DB01 Carbon Fiber-Reinforced Chassis
Verwacht 2008 Q3
Coming Soon!
54045 TA05-IFS R Drive Belt (342mm)
Verwacht 2008 Q3
New drive belt is released in conjunction with TA05-IFS R Chassis Kit and can used as a spare
belt for its drivetrain (37T-18T-37T pulleys). It can also be used wtih TA05 series drivetrain (36T16T-36T pulleys) if modifications indicated in the TA05-IFS R instruction manual are followed
and if ITEM 53988 Ball Differential Pulley (37T) and either ITEM 53989 Center Pulley (18T) or
ITEM 54050 TA05-IFS R 18T Center One-Way are installed.
54050 TA05-IFS R 18T Center One-Way Set
Verwacht 2008 Q3
In conjunction with the release of the TA05-IFS R Chassis Kit, this new Option Part will also be
availabe to provide improved power transmission efficiency for faster cornering speeds.
54051 TRF501X/DB01 18T Center One-Way Set
Verwacht 2008 Q3
54052 TB-03 Aluminum Universal Propeller Shaft Set
Verwacht 2008 Q3
54053 TB-03 Aluminum Propeller Joint Set (Rear)
Verwacht 2008 Q3
Coming Soon!
54054 TB-03 Aluminum Motor Adaptor
Verwacht 2008 Q3
54055 TB-03 04 Spur Gear (96T)
Verwacht 2008 Q3
54056 TB-03 Aluminum Dif Joint Set
Verwacht 2008 Q3
54057 TB-03 Front One Way Unit
Verwacht 2008 Q3
54058 TT-01E Aluminum Steering Set
Verwacht 2008 Q3
54059 TT-01E Front Carbon Damper Stay
Verwacht 2008 Q3
Coming Soon!
54060 TT-01E Rear Carbon Damper Stay
Verwacht 2008 Q3
This is a 3mm rear carbon damper stay for the TT-01E chassis. Also included is a damper
stay mount x 1(54059), body mount mold x 1 (sp.984), 3x12mm metal screws, 5 ball connector nuts, and instruction manual.
Coming Soon!
LIMITED EDITION PARTS FOR RADIO CONTROL VEHICLES
LIM
49382 On Road Tune Hard Spring Set (White)
ITE
Verwacht 2008 Q3
D
49389 On Road Tune Hard Spring Set (Milky Blue)
Verwacht 2008 Q3
49425 TA05 Aluminum Differential Joint (Blue)
Verwacht 2008 Q3
49426 TRF415 Aluminum Differential Joint Set (Blue)
Verwacht 2008 Q3
49462 TA05 Urethane Bumper (Black)
Verwacht 2008 Q3
49463 TRF415 Urethane Bumper (Black)
Verwacht 2008 Q3
49466 M-03 Blue Plate Frame Set
Verwacht 2008 Q3
LIM
LIM
LIM
LIM
LIM
LIM
ITE
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
D
ED
ED
ED
ED
ED
ED
ED
ITI
ITI
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
ON
ON
Coming Soon!
49471 TA05 Wide Pitch Front One-Way Pulley (36T Size/Black)
Verwacht 2008 Q3
49472 TA05 Wide Pitch Differential Pulley (36T Size/Black)
Verwacht 2008 Q3
49494 TB Evo V MS Screw Set (Titanium & Aluminum)
Verwacht 2008 Q3
LIM
LIM
LIM
ITE
ITE
ITE
D
D
D
ED
ED
ED
ITI
ITI
ITI
ON
ON
ON
The titanium screws are to be used for the lower part of the chassis providing extra strength. The
aluminum screws are for the upper deck, improving the vehicle’s center of gravity and weight
balance. The blue dress-up screws are also effective in this role. It is also possible to use the
standard kit screws for the installation of the motor, kingpin, and the front body mount.
49495 TRF416 2.5mm Lower Deck
Verwacht 2008 Q3
This low carbon graphite deck now comes 2.5mm thick compared to previous 2.25mm decks.
The deck’s rigidity has improved, making it excellent for high speed racing and high gripping
tracks. Comes equipped with the motor cooling hole and an air duct.
Coming Soon!
LIM
49499 TB-03 Titanium Screw Set
Verwacht 2008 Q3
ITE
D
ED
ITI
No image available
These are parts for classic indispensable lightweight competition vehicles. The following
parts are included in the set:
-3x6mm Titanium screws (1 pc.)
-3x8mm Titanium screws (7 pcs.)
ON
Coming Soon!
84000 TA05 Center One-way Set (black)
Verwacht 2008 Q3
84001 TA05 Aluminum Motor Heat Sink (black)
Verwacht 2008 Q3
84002 TA05 Aluminum Center Plate (black)
Verwacht 2008 Q3
84003 TA05 Aluminum Motor Mount (black)
Verwacht 2008 Q3
84004 TA05 Aluminum Racing Steer Set (black)
Verwacht 2008 Q3
84005 TA05 -IFS Aluminum Rear Upper Light (0 degrees/black)
Verwacht 2008 Q3
84006 TA05 Alluminum Differential Joint (black)
Verwacht 2008 Q3
LIM
LIM
LIM
LIM
LIM
LIM
LIM
ITE
ITE
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
D
D
ED
ED
ED
ED
ED
ED
ED
ITI
ITI
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
ON
ON
Coming Soon!
84007 46mm Lightweight Steering Shaft (black)
Verwacht 2008 Q3
84008 TRF Special Damper (Hard coat/black)
Verwacht 2008 Q3
84009Turbo Down Retainer (black)
Verwacht 2008 Q3
84010 TA05 Lightweight Aluminum Servo Stay (black)
Verwacht 2008 Q3
84011 Aluminum Wheel Hub Clamp (5mm thick/black)
Verwacht 2008 Q3
84012 Battery Plate Aluminum Mount Screws (black)
Verwacht 2008 Q3
84013 5mm Aluminum Short Ball Nut (black)
Verwacht 2008 Q3
LIM
ITE
LIM
ITE
LIM
LIM
LIM
LIM
LIM
D
D
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
ED
ITI
ED
ITI
ED
ED
ED
ED
ED
ON
ON
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
Coming Soon!
84014 5x5mm Aluminum Ball Connector (black)
Verwacht 2008 Q3
Verwacht 2008 Q3
84016 Stabilizer Rod Stabilizer Bar (black)
Verwacht 2008 Q3
84017 Aluminum Stabilizer End (black)
Verwacht 2008 Q3
84018 Carbon D Stay Setting Spacer (black)
Verwacht 2008 Q3
84019 3x10mm Aluminum Turn Buckle Shaft (black)
Verwacht 2008 Q3
Verwacht 2008 Q3
LIM
LIM
LIM
LIM
LIM
LIM
LIM
ITE
ITE
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
D
D
ED
ED
ED
ED
ED
ED
ED
ITI
ITI
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
ON
ON
Coming Soon!
Verwacht 2008 Q3
Verwacht 2008 Q3
84025 TRF 416 Lower Deck for Stick Type Battery
Verwacht 2008 Q3
LIM
LIM
LIM
ITE
ITE
ITE
D
D
D
ED
ED
ED
ITI
ITI
ITI
ON
ON
ON
It is possible to load a stick type battery pack for Tamiya GP races. As for the low deck, its
thickness has increased from t=2.25 to t=2.5 which improves its strength. In the set there is : 1x
Carbon Low Deck (t=2.5), 1xCarbon Battery Plate, 1xStick Type Cast (Porsche 934 J parts),
2xBlue Aluminum BM screws, and installation screws.
Please note that this product is for Japan release only. If a customer wishes to have such a
Lower Deck please refer them to the very similar TRF416 2.5mm Lower Deck (49495).
Coming Soon!
84026 F-350 Axle Parts Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
These are the axle parts which are used in Tamiya’s F-350 and Toyota Hilux High-LIft. This axle
parts set allows the modeller to get to know his vehicle’s mechanics in more detail and allow a
more personalized customization.
84027 Super Clod Buster Axle Parts Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
This is the axle parts for the Super Clod Buster Monster Truck. This axle parts set allows the
modeller to get to know his vehicle’s mechanics in more detail and allow a more personalized
customization.
84028 TLT-1 Axle Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
This is an axle parts set which is used in the TLT-1 Rock Buster and Max Climber. This axle
Coming Soon!
LIM
49499 TB-03 Titanium Screw Set
Verwacht 2008 Q3
ITE
D
ED
ITI
No image available
These are parts for classic indispensable lightweight competition vehicles. The following
parts are included in the set:
ON
Coming Soon!
84000 TA05 Center One-way Set (black)
Verwacht 2008 Q3
84001 TA05 Aluminum Motor Heat Sink (black)
Verwacht 2008 Q3
84002 TA05 Aluminum Center Plate (black)
Verwacht 2008 Q3
84003 TA05 Aluminum Motor Mount (black)
Verwacht 2008 Q3
84004 TA05 Aluminum Racing Steer Set (black)
Verwacht 2008 Q3
84005 TA05 -IFS Aluminum Rear Upper Light (0 degrees/black)
Verwacht 2008 Q3
84006 TA05 Alluminum Differential Joint (black)
Verwacht 2008 Q3
LIM
LIM
LIM
LIM
LIM
LIM
LIM
ITE
ITE
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
D
D
ED
ED
ED
ED
ED
ED
ED
ITI
ITI
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
ON
ON
Coming Soon!
84007 46mm Lightweight Steering Shaft (black)
Verwacht 2008 Q3
84008 TRF Special Damper (Hard coat/black)
Verwacht 2008 Q3
84009Turbo Down Retainer (black)
Verwacht 2008 Q3
84010 TA05 Lightweight Aluminum Servo Stay (black)
Verwacht 2008 Q3
84011 Aluminum Wheel Hub Clamp (5mm thick/black)
Verwacht 2008 Q3
84012 Battery Plate Aluminum Mount Screws (black)
Verwacht 2008 Q3
84013 5mm Aluminum Short Ball Nut (black)
Verwacht 2008 Q3
LIM
ITE
LIM
ITE
LIM
LIM
LIM
LIM
LIM
D
D
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
ED
ITI
ED
ITI
ED
ED
ED
ED
ED
ON
ON
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
Coming Soon!
Verwacht 2008 Q3
Verwacht 2008 Q3
84016 Stabilizer Rod Stabilizer Bar (black)
Verwacht 2008 Q3
84017 Aluminum Stabilizer End (black)
Verwacht 2008 Q3
84018 Carbon D Stay Setting Spacer (black)
Verwacht 2008 Q3
Verwacht 2008 Q3
Verwacht 2008 Q3
LIM
LIM
LIM
LIM
LIM
LIM
LIM
ITE
ITE
ITE
ITE
ITE
ITE
ITE
D
D
D
D
D
D
D
ED
ED
ED
ED
ED
ED
ED
ITI
ITI
ITI
ITI
ITI
ITI
ITI
ON
ON
ON
ON
ON
ON
ON
Coming Soon!
Verwacht 2008 Q3
Verwacht 2008 Q3
84025 TRF 416 Lower Deck for Stick Type Battery
Verwacht 2008 Q3
LIM
LIM
LIM
ITE
ITE
ITE
D
D
D
ED
ED
ED
ITI
ITI
ITI
ON
ON
ON
It is possible to load a stick type battery pack for Tamiya GP races. As for the low deck, its
thickness has increased from t=2.25 to t=2.5 which improves its strength. In the set there is : 1x
Carbon Low Deck (t=2.5), 1xCarbon Battery Plate, 1xStick Type Cast (Porsche 934 J parts),
2xBlue Aluminum BM screws, and installation screws.
Please note that this product is for Japan release only. If a customer wishes to have such a
Lower Deck please refer them to the very similar TRF416 2.5mm Lower Deck (49495).
Coming Soon!
84026 F-350 Axle Parts Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
These are the axle parts which are used in Tamiya’s F-350 and Toyota Hilux High-LIft. This axle
84027 Super Clod Buster Axle Parts Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
This is the axle parts for the Super Clod Buster Monster Truck. This axle parts set allows the
modeller to get to know his vehicle’s mechanics in more detail and allow a more personalized
customization.
84028 TLT-1 Axle Set
Verwacht 2008 Q3
LIM
ITE
D
ED
ITI
ON
This is an axle parts set which is used in the TLT-1 Rock Buster and Max Climber. This axle
Coming Soon!
Table of Contents
The items in this section were introduced in earlier Coming Soon Files and we have already taken your intial orders. As they will also be on public display at Tamiya Fair, We
would like to extend to you an opportunity to submit additional orders.
14111 Kawasaki ZZR 1400
Verwacht 2008 Q3
12622 1/350 Crew Set (144 Pcs)
Verwacht 2008 Q3
60401 1/100 Space Shuttle Orbiter
Verwacht 2008 Q2 / reeds leverbaar
56709 1/12 TamTech Gear Porsche 935 “Martini”
Verwacht 2008 Q3
23211 Ferrari GTO (Semi Assembled Premium Model)
Verwacht 2008 Q3
Coming Soon!
Highly Confidential Items
Please note that like the previous items in this Coming Soon, the following items are
also highly confidential items and are being planned for future announcement and
are also subject to change and approval. Therefore we ask that you keep these items
confidential until further notice.
We thank you for your assistance with this.
International Division
Tamiya Inc.
Coming Soon!
49497 1/8 Glow-Engine R/C 4x4 Racing Truck TRF801XT
Verwacht 2008 Q4
LIM
ITE
D
ED
ITI
ON
No image available
This is an assembly kit for a 1/8 engine truggy chassis. The highly efficient drive system
comes from the well designed placement of the propeller shaft. This chassis has plenty to
offer and is great for high end racing.
About the Model
- Highly rigid 3mm A7075 duralumin chassis.
- Aluminum Front/Rear shock tower, Front knuckle, and engine mount.
- Carbon upper deck, center upper deck and servo tray.
- Fully sealed box for R/C system.
- Equipped with 4-bevel differential gearboxes for the front, rear, and center.
- Uses spiral bevel gears for the front and rear.
- Uses a universal joint for the front and rear drive shaft and the propeller shaft.
- 3 piece centrifuge clutch is included.
- Equipped with large aluminum dampers and shaft bots are included.
- Uses a 17mm hex wheel hub.
- Equipped with a standard stabilizer.
- Engine (0.21-0.28cc class), muffler & manifold, tires & wheels (inner sponge), and R/C unit
are sold separately.
- Air cleaner included.

Table of Contents

Transcription

Similar documents

Pole Mounted Obstruction Light

we mean business.

to now. - Kugel Komponents

View Folder - Autolum Processing Co.

Transfer Credit Guidelines

investors presentation – q2 2015

File - Circle Masters Flying club

Alliance Aluminum Extrusions

Print Article

Diverge