Poppet Type, 2-Way Valve Series DSH101 Technical Information

Poppet Type, 2-Way Valve
Series DSH101
Catalog HY15-3502/US
Technical Information
CV
General Description
•
•
Low hysteresis
Various coil terminations and voltages
FC
•
•
•
Flow
Controls
•
•
Polyurethane “D”-Ring eliminates need for backup rings
•
All external parts zinc plated
Load/Motor
Controls
PC
Pressure
Controls
LE
Replaceable, one piece encapsulated coils with minimal
amperage draw
Various manual override options
DSH101C
Out (1)
Fast response available, (CH and CHR)
rated at 30 LPM (8 GPM)
In
(2)
Specifications
Performance Curves
350 Bar (5000 PSI)
Directional
Controls
Leakage at
150 SSU (32 cSt)
5 drops/min. (.33 cc/min.)
Logic
Elements
DC
Maximum Inlet
Pressure
Minimum
Operating Voltage
Manual
Valves
Solenoid
Valves
Proportional
Valves
Operating Temp.
Range/Seals
Normally Closed
85% of rated voltage at
20°C (72°F).
Energized
80 ms
50 ms
70 ms
De-Energized
150 ms
50 ms
35 ms
Coils &
Electronics
Filtration
ISO Code 16/13,
SAE Class 4 or better
BC
11
120
8
80
6
40
3
Bodies &
Cavities
Approx. Weight
.20 kg (0.41 lbs.)
Cavity
C10-2
(See BC Section for more details)
Technical
Data
Form Tool
Rougher
Finisher
1
to
2
o1
2t
o2
1t
o2
1t
DSH101C En.
DSH101CR En.
DSH101CR En.
19
38
58
77
96
5
10
15
20
25
Flow (Q)
Normally Open
PSI Bar
240 16
200
13
160
11
120
8
80
6
SV19
DSH101NR
De-En.
1 to
o2
1t
2
2 to
1
3
0
LPM
0
GPM
None
NFT10-2F
Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DSH101NR En.
40
TD
DSH101CH En.
DSH101CHR En.
DSH101CHR De-En.
DSH101C De-En.
DSH101CR De-En.
0
LPM
0
GPM
-45°C to +93.3°C (“D”-Ring)
(-50°F to +200°F)
-31.7°C to +121.1°C (Fluorocarbon)
(-25°F to +250°F)
Mineral-based or synthetic with
lubricating properties at viscosities
of 45 to 2000 SSU (6 to 420 cSt)
13
160
All parts steel. All operating
parts hardened steel.
Fluid
Compatibility/
Viscosity
Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DSH101CH En.
DSH101CHR En.
200
C, CR
CH, CHR
N, NR
Cartridge Material
Pressure Drop vs. Flow (Through cartridge only)
PSI Bar
240 16
Response Time
SV
CE
Out (1)
In (2)
60 LPM (15 GPM)
PV
In
(2)
DSH101N
Out (1)
DSH101C
Rated Flow
(At 70 PSI ∆P)
MV
Out (1)
DSH101N
In (2)
Nylon inserted jam-nut provides secure holding in high
vibration applications
2t
o1
LM
Pressure Drop ( P)
Shuttle
Valves
Features
Pressure Drop ( P)
Check
Valves
SH
2-Way Poppet Valves. For additional
information see Technical Tips on
pages SV1-SV6.
DSH101N De-En.
DSH101NR De-En.
19
38
58
77
96
5
10
15
20
25
Flow (Q)
Parker Hannifin Corporation
Hydraulic Cartridge Systems
Poppet Type, 2-Way Valve
Series DSH101
Catalog HY15-3502/US
Technical Information
CV
69.6
(2.74)
101.4
(3.99)
22.0
(0.86)
SH
36.0
(1.43)
XXVDC XXW
CAX XXX H
PAT.XXXXXXX
MADEINU.S.A.
50.0
(1.97)
66.5
(2.62)
7-10 Nm
(5-7 lb. ft.)
Torque
Shuttle
Valves
43.4
(1.71)
8.4
(.33)
Check
Valves
Millimeters (Inches)
LM
Load/Motor
Controls
Dimensions
See Super Coil
5/8" I.D.
Information For
Terminal Connectors
7/8-14 UNF-2A
Thread
In (2)
15.8
(.62)
39.8
(1.57)
Normal
Push and Twist M.O.
(Normally Closed
Valves Only)
Out (1)
35.1
(1.38)
Shifted
Push and Twist M.O.
(Normally Open
Valves Only)
14.8
(.58)
23.9
(.94)
PC
Pressure
Controls
11.2
(.44)
34.2
(1.35)
Shifted
29.7
(1.17)
Normal
Flow
Controls
FC
1" Hex.
69-75 Nm (51-55 lb. ft.)
Torque
Flush M.O.
(Normally Open
Valves Only)
THIRD-ANGLE
PROJECTION
Extended M.O.
(Normally Open
Valves Only)
Logic
Elements
LE
DC
Directional
Controls
Ordering Information
DSH101
CH
Normally Closed
Metered reverse flow
(Fast response)
Out (1)
CHR
Normally Closed
Free reverse flow
(Fast response)
Out (1)
CR
Normally Closed
Free reverse flow
Out (1)
N
Normally Open
Metered reverse flow
NR
Normally Open
Free reverse flow
In (2)
In (2)
In (2)
Out (1)
In (2)
Diode
Body
Material
Code Coil Type
Code Diode
Omit Without Coil
SP* Super Coil - 28 Watts
Omit None
R Diode
T
Push & Twist
(N.C. & N.O.)
Omit “D”-Ring / (SK10-2)
N
V
Nitrile / (SK10-2N)
Fluorocarbon /
(SK10-2V)
Code Screen
Omit None
S
Screen
Port
Size
SV
*Recommended
Code Coil Voltage
Omit Without Coil
D012 12 VDC
D024 24 VDC
A120 120/110 VAC, 60/50 Hz
A240 240/220 VAC, 60/50 Hz
SP*
Coil Coil Termination
Omit Without Coil
C
Conduit With Leads
D
A
DIN Plug Face
Amp Jr. Timer†
S
Dual Spade†
L
LS
Dual Lead Wire†
Sealed Lead Wire†
H
Molded Deutsch†
*Recommended
SV20
Code Body Material
Omit Steel
A
PV
Aluminum
Code Port Size
Body Part No.
Omit Cartridge Only
4P
6P
8P
1/4″ NPTF (B10-2-*4P)
3/8″ NPTF (B10-2-*6P)
1/2″ NPTF (B10-2-*8P)
6T SAE-6
8T SAE-8
T8T SAE-8
6B
MV
Manual
Valves
Coil
Termination
Omit None
E Push Type with
Extended Rod
(N.O. Only)
M Push Type with
Flush Rod (N.O. Only)
Code Seals / Kit No.
Out (1)
Coil
Voltage
Code Override Options
In (2)
In (2)
Coil
Type
Solenoid
Valves
Out (1)
Screen
(B10-2-*6T)
(B10-2-*8T)
(B10-2-T8T)†
3/8″ BSPG (B10-2-6B)†
* Add “A” for aluminum. omit for steel.
† Steel body only.
Proportional
Valves
C
Normally Closed
Metered reverse flow
Seals
CE
Coils &
Electronics
Code / Style
Override
Option
BC
Bodies &
Cavities
Style
TD
Technical
Data
10 Size
Solenoid Valve
†DC Only
Parker Hannifin Corporation
Hydraulic Cartridge Systems