The first name in Rooftents, Retractable Awnings, Fridge - Eezi-Awn

Transcription

The first name in Rooftents, Retractable Awnings, Fridge - Eezi-Awn
The first name in Rooftents,
Rooftents,
Retractable Awnings,
Awnings, Fridge Sliders,
Retractable
Roofracks and Accessories
Roofracks
Accessories
- the last word quality
Fridge
Buddy
Fridge
Shuttle
K9 FRIDGE BUDDY is a unique
custom designed, engineered
and manufactured simple to use
Push-Pull gas strut torsion operated Fridge Slider.
The Step-down and Step-up
mechanism allows for Eezi access to the fridge. The attached
rotating draw handle is fixed
out of the way when the fridge
is open or whilst travelling – it
is locked in position. Includes
fridge tie-down straps.
Available for most fridges 50lt
or less.
Manufactured of powder-coated aluminium extrusions.
The Shuttle is the lightest and
most slimline fridge slide
in the Industry.
Only weighs 7 kgs
and just 35mm high.
The slide is available for most
50 litre or less portable fridges
and is supplied with
Tie-down straps.
Roof Rack
AFRICAN WILD DOG also known as THE
PAINTED DOG is South Africa’s rarest carnivore
and one of the World’s most endangered canines. It
is estimated that there are between 4,000 and 5,000
of these dogs in small packs of approximately 10
animals roaming across the plains of Africa in the
Wild and most of these are in protected areas e.g.
Game Reserves.
A revolutionary cutting edge advancement in
expedition style rack design. The K9 System is
engineered and manufactured at
the Eezi-Awn facility.
With over 30 years of experience in the expedition market on 4 continents, Eezi-Awn
knows what is necessary in a rack and what
will take it to the next level.
The K9 Roof Rack System is thinner, stronger,
more functional, aerodynamic
and made to last.
Spade Cradle
SPADE CRADLE
Manufactured from steel - electro
pacivated and powder-coated. Fits
most roofracks on the side or on
top.
NB. Lock not supplied.
AX Cradle
AX CRADLE
Manufactured from steel - electro
pacivated and powder-coated. Fits
most roofracks on the side or on
top.
NB. Lock not supplied.
Aero Loadbar
Spare-Wheel
Holder
K9 AERO LOADBARS
are dynamic, sleek, streamlined,
robust and manufactured of
extruded powder-coated
aluminium.
Available with various adaptors
to fit most vehicles.
SPARE WHEEL CRADLE
Manufactured from steel
- electro pacivated and
powder-coated. Fits most
roofracks on top.
NB. Lock not supplied.
Hi-Lift
adlee
Cradl
Jackk Cr
Jac
HI-LIFT JACKCRADLE including
foot-piece.
Manufactured from steel - electro
pacivated and powder-coated. Fits
most roofracks on the side or on
top and includes Jack footpiece
bag.
NB. Lock not supplied.
Aluminum
Ladder
K9 LANDY LADDER
Rear mounted and manufactured
of extruded
and laser cut powder-coated
lightweight aluminium.
Ladder and footpiece are the
lightest in the industry
and only weigh 2.5 kgs.
Available for Series 90 and Defender 110 Landrovers.
Tables
K9 TABLES are lightweight, robust and manufactured of rigidisedstainless steel with rounded corners, aluminium
powder-coated legs and stainless steel leg steys.
Available in three sizes.
Under roofrack mounting table slides are
Optional additional accessories
Three Sizes Available:
750 x 390
850 x 500
1160 x 750
Jer ry Can
Holder
K9 JERRY CAN HOLDER
is unique with custom designed folding braces.
These collapse and store in
the 60mm high flatpak tray
when travelling. The lockable unit is manufactured
of powder-coated steel and
holds two Jerry Cans.
Jazz
Manufactured of heavy duty ripstop canvas, double stitched throughout and stretched onto
aluminium bows, which are fixed to top quality polyurethane coated plyboards supported
with anodised aluminium hardware and stainless steel hinges. Board locking mechanism anodised custom designed aluminium extrusions - the only rooftent in the industry that has
this system. Mattress which is fabric covered 65 mm highdensity foam,
SABS approved. Flysheet of lightweight re-inforced PVC supported free of roof by aluminium
bows. Mosquito mesh both entry doors and window openings. Zip-up privacy panels both
sides to cover windows internally. Unique internal bungy mechanism to aid closing of roof
tent. Two elongated internal storage pockets. Patented anodized aluminium retractable
extension ladder with new built in foot piece std.
Rooftop Tent
Shower Skirt
1220
The Roof tent is manufactured of ripstop canvas, double stitched thro’-out
and stretched onto aluminium bows, which are fixed to top quality polyurethane coated plyboards supported with anodised aluminium hardware and
stainless steel hinges.
Board locking mechanism - anodised custom designed aluminium extrusions
- the only rooftent in the industry that has this system.
Mattress which is fabric covered SABS approved 65mm hi-density foam.
Mosquito mesh both entry doors and side windows.
Zip-up privacy panels both sides to cover windows internally.
Patented anodised aluminum retractable extention ladder.
Sizes Open:
1200 (w) x 2440 (L) x 1300 (H)
1400 (w) x 2440 (L) x 1300 (H)
1400
1600
1800
With zip up
doors available
for all Eezi-Awn
Rooftents.
Sizes available - open:
1220 (w) x 2440 (l) x 1300mm (h)
1400 (w) x 2440 (l) x 1300mm (h)
1600 (w) x 2440 (l) x 1300mm (h)
1800 (w) x 2440 (l) x 1300mm (h)
Series 3
Rooftop Tent
T
Top
Xklusiv
The
Fun
With Add-A-Room
It has a unique patented
slide out rail and lifting bow
1400
With Add-A-Room
The tent is manufactured of ripstop canvas, double stitched throughout and stretched
onto aluminium bows which are fixed to top quality polyurethane coated plyboards supported with anodised aluminium hardware and stainless steel hinges, mattress which is
fabric covered SABS approved 65mm laminated hi-density foam.
Board locking mechanism - anodised custom designed aluminium extrusions - the only
rooftent in the industry that has this system.
Mosquito mesh both entry doors and side windows.
Zip-up privacy panels both sides to cover windows internally.
Patented anodized aluminium retractable extension ladder .
Entrance to the tent is covered, giving better protection against the elements.
Available complete with or without Add-a-room.
Size available:
Top: 2440 (L) x 1400 (W) x 1300 (H)
Add-A-Room: 2000 (L) x 1400 (W)
Height:
2000mm - 2200mm
Manufactured of heavy duty ripstop canvas double
stitched thru’-out and stretched onto aluminum bows
which are fixed to imported polyurethane coated
plyboards with anodized aluminum hardware and
stainless steel hinges.
Unique in design - climb into bedroom section from
inside the rooftent.
Unique slide out anodised aluminium roof extender. Board locking
mechnism - anodised custom designed aluminium extrusions.
Mattress which is SABS (South African Bureau of Standards) approved fabric covered 65mm hi-density foam.
Flysheet of lightweight reinforced PVC.
Mosquito net both entry doors and side windows.
Zip-up privacy panels both sides to cover windows internally.
Unique internal bungy mechanism to aid closing of roof tent.
Two elongated internal storage pockets.
Large clip on Add-A-Room manufactured of ripstop fabric and
with special features of a full opening
weather proof window and mosquito
net door opening inclusive of rear
panel and groundsheet.
Patented anodised aluminium retractable extention ladder with built in
foot piece.
Sizes available: Add-A-Room:
1400 (W) x 2440 (l)
1600 (W) x 2440 (l)
1800 (W) x 2440 (l)
2200 (W) x 2400 (l)
Entry to sleep area:
Note the unique
patented slide out
rail and lifting bow
to give more headroom when entering
the rooftent.
1400 (W) x 2000 (l)
1600 (W) x 2000 (l)
1800 (W) x 2000 (l)
2200 (W) x 2000 (l)
Height:
2000mm - 2200mm
1400
1600
1800
2200
Manufactured of heavy duty ripstop canvas double stitched throughout and
stretched onto powder coated steel bows which are fixed to an imported polyurethane coated plyboard with anodised aluminium hardware and stainless steel hinges.
Features include: Two separate mattresses that are fabric covered 65 mm laminated
high density foam, SABS approved.
Suspended flysheet of lightweight reinforced PVC.
A zip-up window along the full length of the tent with sewn in flymesh and privacy
panel.
Side windows with and zip-up privacy panels and sewn in Mosquito net.
Unique internal bungy mechanism to aid opening and closing of rooftent.
Two elongated internal storage pockets.
Two patented anodized
aluminium retractable
extension ladders. Heavy
duty reinforced PVC rain/
dust proof travel cover with
quick release ratchet assist
closing mechanism.
Manufactured to suit most
vehicles and trailers.
Family
T
Series 3 and Top Rooftoptent Features
Two handy elongated
internal pockets
Windows and flysheets
are held up by spring
steel rods
Large windows with
Internal privacy panels,
and zip-up flymesh.
Rooftop Tent
Travel
Cover
Sleeps four comfortably
Size avaliable - Open:
2200(w) x 2440(l) x 1300mm(h)
Velcro on bottom flap
seals off tent completely
against insects
Elastic internal bungy
systems helps in closing
the tent
All Eez-Awn Rooftents are
protected by a heavy duty
re-inforced PVC travel cover
with quick release ratchet
assist closing mechanism.
Built-in air-vents allow
for extra ventilation
Stainless steel inserts add
strengthening for flysheet
and canopy spring steel
support rods
Aluminium rods keep the
flysheet off the tent for
better ventilation. Plastic
clips allows flysheet to be
easily removed.
Double stitching
throughout increases
durability
Eezi-Awn’s Series 3 Rooftents are supplied
complete with a DIY installation kit which
simplifies the fitting of the rooftents to
roofracks and loadbars.
Globe
Tracker
Globe
Drifter
Trailer Tent
Trailer Tent
With Add-A-Room
With Add-A-Room
Manufactured of ripstop canvas double stitched thru’-out and stretched onto powder
coated steel bows which are fixed to an imported polyurethane coated plyboard with
anodised aluminium hardware and stainless steel hinges. Unique in design - step up
into the bedroom section from inside the tent.
Features include:
A South African Bureau of Standards approved 85mm thick high density fabric covered
mattress. Large suspended flysheet. A zip-up window along the full length of the tent
with sewn in flymesh and privacy panel. Side windows and zip-up privacy panels with
sewn in mosquito nets. Unique internal bungy mechanism to aid opening and closing of
rooftent. Two elongated internal storage pockets.
Large clip on Add-A-Room manufactured of
ripstop fabric includes a rear panel and groundsheet, with a full opening weather proof window
and mosquito net to door opening. The Add-ARoom and groundsheet comes complete in a
sturdy canvas storage bag.
Anodised aluminium ladder. Heavy duty reinforced PVC rain/dust proof travel cover with
quick release ratchet assist closingmechanism.
Sizes:
Manufactured to suit trailers with heights
Closed: 2100 (L) x 1500 (W) x 185mm (H)
from1500mm and up.
Open: 2100 (L) x 2500 (W) x 1500mm (H)
Add-A-Room: 2100 (L) x 2500 (W)
Weight: Approx. 75kg
Manufactured of heavy duty ripstop canvas double stitched
thru’-out and stretched onto powder coated steel bows
which are fixed to an imported polyurethane coated
plyboard with anodised aluminium hardware and stainless
steel hinges. Unique in design - step up into the bedroom
section from inside the tent.
Features include:
A bag awning (attached to the front profile of the trailer
tent) which extends 1500mm. A South African Bureau of
Standards approved 85mm thick high density fabric covered mattress. Suspended flysheet of lightweight reinforced
PVC.
A zip-up window along the full length of the tent with sewn
in flymesh and privacy panel. Side windows and zip-up
privacy panels with sewn in mosquito nets. Unique internal
bungy mechanism to aid opening and closing of rooftent.
Two elongated internal storage pockets. Large clip on
Add-A-Room manufactured of heavy duty ripstop fabric
includes a rear panel and groundsheet, with a full opening
weather proof window and mosquito net to door opening.
The Add-A-Room and groundsheet comes complete in a
sturdy canvas storage bag. Anodised aluminium ladder.
Heavy duty reinforced PVC rain/dust proof travel cover with
quick release ratchet assist closing mechanism. Manufactured to suit trailers with heights from 1500mm and up.
Sizes Closed: 2100 (L) x 1500 (W)
x 185mm (H)
Open: 2100 (L) x 1500 (W)
x 1500mm (H)
Add-A-Room: 2100 (L) x 2500 (W)
Weight: Approx. 70kg
Series
2000
Retractable Awning
Series
1000
Sizes available:
Retractable Awning
2.0m, 2.5m, 3.0m and 3.5m
all extend 2.1m
Eezi-Awn’s awnings are unique, self contained and maintenance free.
They are precision made to the highest standards with top quality fabric
housed in compact lightweight anodised aluminium casings. Easy pull,
spring loaded roll-upmechanism with attached adjustable arms and support legs complete these simple to operate awnings.
A slimline, lightweight, compact, maintenence free roll up awning.
Spoyla
Awn
Awning Adaptor Clamp
The kit is manufactured of black
anodised aluminium extrusions& fixed with stainless
steel bolts - fits most vehicles
with black roof runners.
Recommended for SUV’s, Vans,
Bakkies, 4x4’s, Mini Motorhomes
and Caravans.
Sizes available:
1.5m, 2.0m, 2.5m,
3.0m, 3.5m, and 4.0m
all extend 2.1m
Recvee Panels
for Series 2000 Awning
A lightweight maintenance free spring
loaded retractable awning.
One size available
Casing 1500 Long and the fabric extends
2.1metres
G clamp
Eezi to install front and side panels
provide added living space, privacy
and protection against sun, wind
and rain. Panels are available for all
Eezi-Awn’s Retractable Awnings.
Manufactured to the highest specification, the panels clip into the
awnings and slide into front roller
and zip together at the corners with
groundsheet included.
Jimmy
Awning Add-A-Room
The lightweight Add-A-Room tent can
be unzipped from main awn and supplied poles left standing whilst driving
away.
The Add-A-Room tent is manufactured
of lightweight ripstop canvas with zip-up
mosquito mesh and privacy flaps on
both entry door and side window.
Sleeps two comfortably.
Size: 1400 (W) x 2200 (L) x 1800 mm (H)
Awning Add-A-Room fits both:1000 and 2000 awnings.
BAT RECVEE PANELS
Manufactured to the highest
specification the Eezi to install
drop side panels with one
door provides added living
space, privacy and protection
against sun, wind and rain.
Windows are an optional
extra.
Eezi-Awn’s unique Bat-in-a-Bag 270
self contained awning is manufactured of anodised aluminium extruded rafter arms complete with
attached adjustable support legs.
It is lightweight, maintenance free
and simple to operate. The unit is
supplied complete with adaptor kit
Colours: beige or green
Bat/M
anta
Surround Panels
Eezi to install side panels provide
added living space, privacy and protection against sun, wind and rain.
Eezi-Awn’s unique Manta-in-a-Bag 270+ self contained awning is
manufactured of anodised aluminium extruded rafter arms complete with attached adjustable support legs. It is lightweight, maintenance free and simple to operate. The unit is supplied complete
with adaptor kit. Colours: beige or green
Awning
There are good reasons why Eezi-Awn is one of the largest manufacturers of RECVEE Equipment.
Since its inception 31 years ago the name Eezi-Awn has lomg been synonymous with quality
rooftop tents and retractable awnings, Eezi-Awn’s dedication for exceptional service is evident
in all the equipment we produce, sell locally and export to many countries around the world.
Eezi-Awn is beyond comparison.
Remember that long after the sweetness of price is gone Quality prevails.
Cussonia Park
3 Ridge Road, Laser Park
Honeydew, Roodeport
Tel: +27 11 794 6311
Fax: +27 11 794 6233
E-mail: [email protected]
Website: eeziawn.com
Eezi-Awn goes beyond borders...