climate control product guide

Transcription

2.01.08
updated
2.01.08
updated
2.01.08
updated
2.01.08
updated
CLIMATE CONTROL
PRODUCT GUIDE
0985822
Climate Control Product Guide
3/08-25M
CURE • THAW • PREVENT FROST • AIR HEAT • DRY
www.wackerneuson.com
2.01.08
updated
2.01.08
updated
TABLE OF CONTENTS
2
3
GROUND HEATERS™
PRODUCT INDEX
HEATING AND DRYING
Hydronic Heat:
Ground Heaters is a brand of climate control products
from Wacker Corporation, a subsidiary of Wacker
Construction Equipment AG (Munich, Germany), and
is sold and rented by a network of dealers and
supported by a team of factory trained sales and
service personnel.
With over 15 years of experience in climate control,
Ground Heaters products lead the industry with
superior quality and support. Our portable and userfriendly products make for easier setups and lower
labor costs, and help maintain project schedules.
With products in use by commercial and industrial
construction companies, highway bridge builders,
utilities, municipalities and residential contractors to
cure concrete in cold weather, thaw frozen ground
quickly and safely and heat and dry enclosed
workspaces, Ground Heaters are involved with all
aspects of climate control.
Get the reliability and performance you demand.
Years of product development and listening to
customers’ needs have resulted in equipment you can
count on – job after job.
E1100
E2200
S3000
E3000
CH 5000
Pureheat
PAGE
4-5
6-7
8-9
10-11
12-13
14-15
Air Heat:
Arctic Cub 200 and 300
Arctic Cub 400 and 700
Arctic Bear HD
Arctic Bear XHD
16-17
18-19
20-21
22-23
Drying:
Dryvex R55 and R110
Dryvex AM3000
Dryvex MC5200
24
25
26-27
Accessories:
Hydronic Surface Heaters
Hydronic Air Heaters
Air Heat / Dehumidifiers
28-31
32-35
36-39
Note: Specifications may change due to continuous product development.
www.groundheaters.com
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
4
5
E1100 HYDRONIC GROUND HEATER
The Hydronic Ground Heater product line is designed to quickly,
easily and economically thaw frozen ground, cure concrete, prevent
frost and provide temporary air heat during cold weather
conditions. The E1100 thaws up to 2,200 sq. ft. of frozen ground
at a rate of one-foot-deep per day. It will set, finish and cure 2,200
sq. ft. of concrete and up to 6,600 sq. ft. with accessories.
PERFORMANCE
Heater, gross output
Heater, net output
Heater efficiency
Temperature controller
Fuel consumption at full load
Fuel requirement
Run time
Electrical requirement
Normal operating temp
Normal hose operating pressure
HTF flow rate per loop
Thawing capacity
with accessories
Curing capacity
with accessories
Frost prevention
with accessories
Air heat capacity
with accessories
Performance monitoring light
E1100
Btu/h
Btu/h
%
gph
h
°F
psi
gph
sq ft
sq ft
sq ft
cu ft
126,000
110,000
87
digital
90/.87
winter blend diesel
up to 115
1 x 20 amps x 120V AC
100 - 180
70 - 90
265
1,100 - 2,200
2,200 - 3,300
2,200
up to 6,000
up to 3,300
up to 9,900
180,000
yes
DIMENSIONS AND CAPACITIES
E1100
Length - hitch extended
Length - hitch folded
Width
Height
Ground clearance
Approximate. weight w/o fuel
Approximate. weight with fuel
Fuel capacity
Heat transfer fluid
Pump
Hose
Hose reel
Hose rewind
Circulation loop
Tires
Hitch
Lifting bar
Fork lift pockets
114
88
65
61
10
1,992
2,456
72
50
1 - 265 gph positive displacement
1,100
1
120V AC, w/ 12V DC clutch
1
ST185/80D13
2” ball
yes
both sides and rear
in
in
in
in
in
lbs
lbs
gal
gal
ft
ADDITIONAL INFORMATION
E1100
Tie downs (for transport)
Ground fault interrupt
Main circuit breaker
Burner motor thermal protection
Burner ignition
High temperature shutdown
No-flame shutdown
Low fluid shutdown/warning light
Vented closed loop circulation
Hydronic heater operating pressure
Temperature gauges
Pressure gauges
5
yes
1
auto reset
electronic
yes
yes
yes
yes
0 psi
1
1
All Ground Heaters are certified and complies with US NHTSA and Transport Canada regulations.
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
6
7
The Hydronic Ground Heater product line is engineered for reliable,
trouble free starts in even the coldest weather conditions. The
E2200 will thaw up to 4,400 sq. ft. of frozen ground. This unit can
also heat up to 4,400 sq. ft. of ground, indoors or out, to prepare
for concrete placement, to prevent frost penetration or to ensure
proper concrete curing. With accessories the unit will provide
360,000 cu. ft. of dry heat.
PERFORMANCE
Heater, gross output*
Heater, net output
Heater efficiency
Fuel requirement
Run time
Electrical requirement**
Thawing capacity
with accessories
Curing capacity
with accessories
Frost prevention
with accessories
Air heat capacity
E2200
Btu/h
Btu/h
%
gph
h
°F
psi
gph
sq ft
sq ft
sq ft
cu ft
* At or below 5,000 ft ASL
** When not using on-board generator
252,000
220,000
87
digital
1.80 / 2.20
winter blend diesel
up to 130
2 x 20 amp x 120V AC
100 - 180
70 - 90
265
2,200 - 4,400
up to 4,400
4,400
up to 13,200
up to 6,600
up to 19,800
360,000
yes
E2200
Width
Height
Ground clearance
Approximate weight
without fuel
with fuel
Fuel capacity
Heat transfer fluid
Pump
Hose
Hose reel
Hose rewind
Circulation loop
Tires
Hitch
Lifting bar
Fork lift pockets
169
72
88
12
without generator with generator
4,715
5,240
5,772
6,197
150
95
2,200
1
2
ST235/80R16
2” ball
yes
both sides and rear
in
in
in
in
lbs
lbs
gal
gal
ft
E2200
Brakes
Main circuit breaker
Burner ignition
No-flame shutdown
Temperature gauges
Pressure gauges
Interior light
12V DC electric
4
yes
2
manual reset
electronic
yes
yes
yes
yes
0 psi
5
2
1 - 120V AC
The E2200 Ground Heater is certified and complies with US NHTSA and Transport Canada regulations.
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
8
9
S3000 HYDRONIC GROUND HEATER
The Hydronic Ground Heater product line is built Tundra Tough™.
The S3000 will thaw up to 4,500 sq. ft. of frozen ground and cure
up to 6,000 sq. ft of ground with standard equipment. With
accessories, the unit will provide 120,000 cu. ft. of dry heat.
PERFORMANCE
Heater, net output
Heater efficiency
Fuel requirement
Run time
Thawing capacity
Curing capacity
Air heat capacity with accessories
Frost prevention
S3000
Btu/h
Btu/h
%
gph
hours
°F
psi
gph
sq ft
sq ft
cu ft
sq ft
280,000
240,000
84
digital
2.00 / 2.40
winter blend diesel
up to 120
165 - 180°
70 - 110
265
3,000 - 4,500
6,00O
120,000
9,00O
S3000
Width
Height
Ground clearance
Approximate weight
without fuel
with fuel
Fuel capacity
Heat transfer fluid
Pumps
Hose
Hose reel
Hose rewind
Circulation loop
Tires
Hitch
Lifting bar
Fork lift pockets
171
79
85
12
5,330
5,855
6,614
7,139
178
112
3,000
1
2
LT235/85R16
2-5/16” ball
yes
both sides and rear
in
in
in
in
lbs
lbs
gal
gal
ft
S3000
Brakes
Main circuit breakers
Burner ignition
No-flame shutdown
Temperature gauges
Pressure gauges
Interior light
12V DC electric
4
yes
2
manual reset
electronic
yes
yes
yes
yes
0 psi
2
2
2 - 120V AC
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
10
11
The Hydronic Ground Heater product line is easy to operate and
dependable. The E3000 will provide maximum flow and ensure
consistent heat delivery for thawing and curing. One pump per
hose loop means more Btu’s/h delivered to project than other
hydronic heaters. The unit thaws or cures up to 6,000 sq. ft. and
with accessories the unit will cure up to 18,000 sq. ft. or provide
535,000 cu. ft. of dry heat.
PERFORMANCE
Heater, net output
Heater efficiency
Fuel requirement
Run time
Thawing capacity
with accessories
Curing capacity
with accessories
Frost prevention
with accessories
Air heat capacity with accessories
E3000
Btu/h
Btu/h
%
gph
hours
°F
psi
gph
sq ft
sq ft
sq ft
cu ft
385,000
321,000
83
digital
2.75 / 3.17
winter blend diesel
up to 140
100 - 180
90 - 110
265
3,000 - 6,000
up to 6,000
6,00O
up to 18,000
up to 9,00O
up to 27,000
535,000
yes
E3000
Width
Height
Ground clearance
Approximate weight
without fuel
with fuel
Fuel capacity
Heat transfer fluid
Pumps
Hose
Hose reels
Hose rewind
Circulation loops
Tires
Hitch
181
91
94
12
5,580
6,105
7,190
7,715
230
115
3,000
2
2
ST215/75D14
2-5/16” ball
in
in
in
in
lbs
lbs
gal
gal
ft
E3000
Brakes
Burner ignition
No-flame shutdown
Temperature gauges
Pressure gauges
Interior light
12V DC electric
4
yes
2
manual reset
electronic
yes
yes
yes
yes
0 psi
5
2
1 - 120V AC
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
12
13
CH5000 HYDRONIC CROSS HEATER™
This new breed of Hydronic Ground Heaters allows maximum job
site flexibility. The unit thaws or cures up to 10,000 sq. ft. With just
a few accessories you can cut your thaw time in half, increasing
your curing sq. ft. to 30,000, prevent frost up to 45,000 sq. ft., and
provide clean dry air up to 735,000 cu. ft. Multiple accessories can
be added without the addition of an auxiliary pump.
PERFORMANCE
Fuel options
Heater, net output
Heater efficiency
Fuel requirement
Run time
Thawing capacity
Curing capacity
with accessories
Frost prevention
with accessories
CH5000
Btu/h
Btu/h
%
gph
hours
°F
psi
sq ft
sq ft
sq ft
propane, diesel, or natural gas
550,000
440,000
83
digital
3.93 / 4.53
winter blend diesel
up to 100
1 x 230v, 50 amp, 1ph
1 x 115v, 15 amp
165 - 180
125
10,000
10,00O
up to 30,000
up to 15,00O
up to 45,000
CH5000
Length
Width
Height
Approximate weight
without fuel
with fuel
Fuel capacity
Heat transfer fluid
Pump
Hose
Hose reels
189
98
95
8,925
9,725
10,700
11,500
250
210
5,000
2
in
in
in
lbs
lbs
gal
gal
ft
CH5000
Brakes
Burner ignition
No-flame shutdown
12V DC electric
4
yes
2
manual reset
electronic
yes
yes
yes
yes
2.01.08
updated
2.01.08
updated
HYDRONIC
HEAT
14
15
HYDRONIC AIR HEATER
The Pureheat™ Hydronic Air Heater provides safe, clean, dry heat
for your work environment. The unit produces 860,000 Btu/h and
saves up to 50% of the fuel over traditional methods. The fuel
flexible heater allows the use of diesel, natural gas or propane.
The versatile unit can also be used to cure concrete, thaw frozen
ground and prevent frost.
PERFORMANCE
PUREHEAT™
Fuel options
Fuel, input
Fuel, output
Run time (at full load)
Heater efficiency
Propane
Natural gas
Diesel
Exhaust
Propane
Natural gas
Diesel
HTF flow rate (per loop)
Thawing capacity with accessories
Curing capacity with accessories
Frost prevention with accessories
propane, diesel or natural gas
860,000
714,000
up to 71 hours*
83
digital
Btu/h
Btu/h
%
gph
CFH
gph
9.4
860
6.1
CFM
CFM
CFM
136.8
164.5
137.2
15 amp, 120V AC
100 - 180
2,700
up to 18,000
up to 30,000
up to 45,000
°F
gph
sq ft
sq ft
sq ft
* with optional fuel tank
PUREHEAT™
Length
in
Width
in
Height
in
Ground clearance
in
Approximate weight without fuel lbs
with fuel
lbs
Fuel capacities
gal
Heat transfer fluid
gal
Pump
Hose 1,000 ft (total)
ft
Hose reels
Hose rewind
Circulation loops
Tires
Hitch
Loading ramp
On-board manifolds (supply/return)
Lifting bar
HX-Series Heat Xchangers (choose one set)
HX50 (50,000 Btu/h, 710 cfm)
HX100 (100,000 Btu/h, 1,315 cfm)
HX200 (200,000 Btu/h, 2,400 cfm)
172
93
93
9
7,155*
11,230*
175 or 435*
145
1 - 1.5 hp centrifugal
8 x 100, 4 x 50
1
120V AC, with 12V DC clutch
up to 20
LT235/85R16
pintle
1
1
standard
PUREHEAT™
Brakes
No-flame shutdown
Hydronic heater operating pressure psi
Temperature gauges
Pressure gauges
Interior light
12V DC electric
yes
2
yes
yes
yes
yes
0
1
1
1 - 120V AC
qty 16
qty 8
qty 4
2.01.08
updated
2.01.08
updated
AIR HEAT
16
17
ARCTIC BEAR CUB™
The Arctic Bear Cub™ 200 and 300 are versatile light duty air
heaters. They can handle various heating and drying applications
with 144,000 to 242,000 BTU’s/H at 200° outlet temperature.
SPECIFICATIONS
Length
Width
Height
Weight
Fuel capacity
Air outlet diameter options
Stack Diameter
HEATER:
Sizing-Air Heat
Sizing-Drying
Fuel input
Burner ignition
Heat output
Heater efficiency
Firebox
Heat exchanger
Air output temperature
Fuel consumption: Diesel
BLOWER:
Type
CFM
Static pressure (in. wc)
in
in
in
lbs
gal
in
in
cu ft
cu ft
Btu/h
Btu/h
%
°F
gph
*assumes intake air of 50° F (10° C)
These heater efficient units
provide a 24 hour run time with the standard, extra large fuel tank.
ARCTIC BEAR CUB™ 200
SPECIFICATIONS
55
24
31
185
26.42
120v, 15a, 1ph
1 x 12
6
Length
Width
Height
Weight
Fuel capacity
Stack Diameter
Lift eyes
HEATER:
Sizing-Air Heat
Sizing-Drying
Fuel input
Burner ignition
Heat output
Heater efficiency
Firebox
Heat exchanger
BLOWER:
Type
CFM
240,000
103,200
180,000
electric
144,000
80
100% stainless steel
200
1.28
1/2 HP, axial
1720*
0.5
in
in
in
lbs
gal
in
in
cu ft
cu ft
Btu/h
Btu/h
%
°F
gph
68
27.5
46
256
36.72
120v, 15a, 1ph
1 x 17.5
6
4
403,000
221,400
302,000
electric
242,000
80
200
2.15
3/4 HP, axial
3690*
0.5
*assumes intake air of 50° F (10° C) .
2.01.08
updated
2.01.08
updated
AIR HEAT
18
19
ARCTIC BEAR CUB™
The Arctic Bear Cub™ 400 and 700 are versatile medium
duty air heaters. They offer up to four times more static pressure
and double the cfm,
up to 7,700, than competitive heaters. The 400 and 700 units run
at 80% heater efficiency, the highest in the industry.
SPECIFICATIONS
SPECIFICATIONS
Length gas package
in
diesel package
Width
in
Height gas package
in
diesel package
Weight w/o optional diesel tank lbs
with optional diesel tank - dry
Fuel capacity
gal
in
94
95
33
64
75
585
898
67
1 x 115v, x 15a and 1 x 230v, 20a, 1ph
3 x 12
2 x 16
1 x 20*
Length gas package
in
diesel package
Width
in
Height gas package
in
diesel package
Weight w/o optional diesel tank lbs
with optional diesel tank - dry
Fuel capacity
gal
in
117
119
41
78
94
963
1,494
145
1 x 115v, x 15a and 1 x 230v, 30a, 1ph
3 x 16
2 x 20*
HEATER:
Sizing-Air Heat
Fuel input
Burner ignition
Heat output
Heater efficiency
Firebox
Heat exchanger
Natural Gas
Propane
BLOWER:
Type
CFM
cu ft
Btu/h
Btu/h
%
°F
gph
CFH
gph
505,000
380,000
electric
304,000
80
200
2.71
380
4.15
2 HP, centrigfugal
5,200**
1.77
HEATER:
Sizing-Air Heat
Fuel input
Burner ignition
Heat output
Heater efficiency
Firebox
Heat exchanger
Natural Gas
Propane
BLOWER:
Type
CFM
cu ft
Btu/h
Btu/h
%
°F
gph
CFH
gph
960,000
720,000
electric
576,000
80
200
5.13
720
7.87
4 HP, centrigfugal
7,700**
2.09
* Cubs 400 and 700 include 20” duct adaptors, other diameter outlets available as accessories.
**assumes intake air of 50° F (10° C)
2.01.08
updated
2.01.08
updated
AIR HEAT
20
21
ARCTIC BEAR HD
The Arctic Bear HD is a durable, heavy-duty indirect fired heater
designed to run 24 hours a day, 7 days a week in -20° F ambient
air temperature conditions. The unit produces 770,000 Btu/h, has
a 44-74 hour run time and has an outlet temperature of 210° F. The
fuel flexible heater allows the use of natural gas, propane and diesel.
The unique Recircul-Air™ design allows adjustable recirculation of
warm inside air, resulting in huge fuel savings and even temperatures.
PERFORMANCE
HEATER:
Fuel input
Heat output
Heater efficiency
Fuel consumption
propane
natural gas
diesel (no genset)
Burner ignition
Firebox
Heat exchanger
BLOWER:
Type
CFM
Air outlet temperature
Maximum temperature rise
Run time (diesel)
Performance monitoring lights
ARCTIC BEAR™ HD
Btu/h
Btu/h
%
770,000
577,500
75
gph
CFH
gph
8.4
770
5.5
electronic
ARCTIC BEAR™ HD
Length
in
Width
in
Height
in
Approximate weight
lbs
w/o fuel (no genset, gas burner)
with fuel and genset
Fuel capacity
gal
Tires
Hitch
Lifting points
in
178
93
91
HEATER:
No-flame shutdown
GENERATOR:
Low oil pressure shutdown
Brakes
Interior light
CSA certified
3,380
6,236
250
115/230V, 30A, 1ph
LT235/85R16
2-5/16" ball
3
2 x 12
1 x 16
1 x 20
ARCTIC BEAR™ HD
yes
yes
yes
yes
yes
12V DC electric
1 - 120V AC
yes
The Arctic Bear™ HD Air Heater complies with US NHTSA and Transport Canada regulations
°F
°F
hours
3 HP, centrigfugal
4,000
4.0
210
230
65
1
2.01.08
updated
2.01.08
updated
AIR HEAT
22
23
ARCTIC BEAR XHD
The extra heavy-duty indirect fired Arctic Bear XHD Heater is
engineered to operate 24 hours a day, 7 days a week in -60° F
extreme outdoor temperatures. The 256 US gallon fuel tank will
support up to 770,000 Btu/h and run 45-75 hours with an outlet
temperature of 210° F. The Dura-Gen™ extended run technology
offered on this unit minimizes oil changes to every 3,000 hours!
The unique Recircul-Air™ design allows adjustable recirculation of
warm inside, resulting in huge fuel savings and even temperatures.
PERFORMANCE
HEATER:
Fuel input
Heat output
Heater efficiency
Fuel consumption
Burner ignition
Firebox
Heat exchanger
BLOWER:
Type
CFM
Air outlet temperature
Maximum temperature rise
Run time (diesel)
Performance monitoring lights
Generator
ARCTIC BEAR HD
Length
Width
Height
Ground clearance
Approximate weight
w/o fuel
with fuel
Fuel capacity
Tires
Hitch
Crane lifting eyes
Forklift pockets
187
94
88
13
in
in
in
in
lbs
gal
in
5,700
7,543
256
LT235/85R16
pintle
4
yes
2 x 12
1 x 16
1 x 20
ARCTIC BEAR XHD
Btu/h
Btu/h
%
gph
°F
°F
hours
430,000 - 770,000
322,500 - 577,500
75
3.55 - 6.0
electronic
3 HP, centrigfugal
4,000
4.0
210
240
65
1
8.0 kW, 1800 rpm, Kubota liquid-cooled
HEATER:
No-flame shutdown
GENERATOR:
Low oil pressure shutdown
Brakes
Interior light
CSA certified
ARCTIC BEAR XHD
yes
yes
yes
yes
yes
12V DC electric
1 - 120V AC
yes
The Arctic Bear™ XHD Air Heater complies with US NHTSA and Transport Canada regulations
2.01.08
updated
2.01.08
updated
DRYING
SYSTEMS
24
25
DRYVEX™ R55 AND R110
DRYVEX™ AM3000
The Dryvex™ commercial dehumidifiers will keep your construction
and restoration projects on schedule and on budget by decreasing
drying time and increasing production for taping, mudding, and
painting. Features include an energy-efficient compressor, sturdy
handle and convenient roller wheels for easy positioning on site.
The innovative design of the AM3000 air mover provides the perfect
job solution when you need fast, efficient drying power with limited
electricity. The ultra high-efficiency 16-inch axial fan operates on
just 2 amps of power, yet moves a whopping 3,000 cfm. Add an
optional caster package for “center of the room” drying. Connect
up to 6 units from one outlet.
SPECIFICATIONS
R55
R110
Voltage
Electrical plug
Airflow rating
Refrigerant
Water drain hose
Size (w x d x h)
Weight
115 V / 60 Hz
7
NEMA 5-15 P
294
R22
20
21 x 18 x 34
103
115 V / 60 Hz
11
NEMA 5-15 P
471
R22
20
28 x 28 x 39
138
amps
cfm
ft
in
lbs
FEATURES
R55
R110
Compressor type
Compressor thermal protection
Extraction pump kit
Drying capacity @ 90° F / 90% RH
@ 80° F / 80% RH
@ 80° F / 60% RH
WORKING RANGE
Humidity
%
Temperature
°F
Rotary
Yes
Yes
116 PPD
81 PPD
56 PPD
Rotary
Yes
Yes
229 PPD
168 PPD
112 PPD
40 – 100
40 – 100
40 – 100
40 – 100
SPECIFICATIONS
AM3000
Body
Airflow rating
Fan
Depth
Width
Height
Weight
Cord
Roto-molded polyethylene
2
3,000 cfm @ 1 in w.c.
3 blade 16 in axial
18
22
24
30
25 ft 16/3 safety yellow
amps
in
in
in
lbs
The units feature an extraction pump kit, hour meter, washable mesh air filter, control panel
indicator lights, defrosting system, and optional remote humidistat control.
2.01.08
updated
2.01.08
updated
DRYING
SYSTEMS
26
DRYVEX™ MC5200
The Dryvex™ MC5200 is an open drying system that uses
advanced technology to dry flooded buildings quickly, minimizing
business interruption time and reconstruction costs. Dryvection™
technology uses outside air, rather than recycled air, to dry flooded
buildings and their contents.
KEY FEATURES:
• Digital control panel
• Storage for duct work / air movers
• Easy fuel fill accessibility
• Additional storage space
• 7 kW generator
• Color-coded connections
27
SPECIFICATIONS
MC 5200
Length
Width
Height
Weight
w/o fuel
w/ fuel
Supply air blower
Supply air temperature
Extraction blower
Onboard diesel generator
Fuel tank
Fuel
Average fuel consumption
Crane lifting eye
Rollup doors
HEATER
Output temperature
Fuel
Fire box / heat exchanger
Max firing rate
BTU
18 ft 6 in
7 ft 8 in
7 ft 9 in
lbs
°F
gph
°F
gph
btu/h
5,540
6,330
5,200 cfm @ 1.8 in w.c.*
Up to 182
4,100 cfm @ 2 in w.c.*
7 kW w/ liquid cooled diesel
125 gal w/ 40 – 48 hr runtime
Diesel
3
Standard single point
2 for storage compartment
Up to 210
Diesel
Up to 2.7
Up to 380,000
*Assumes ambient temperature of 32° F
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Hydronic
Surface Heaters
28
29
HOSE HANDLING SYSTEMS
PUMP PACKS
Add a Hose Handling System (and Pump Pack) to Ground Heater
models to thaw even faster, or increase size of area for frost
prevention, or concrete curing. This rugged accessory provides
easy use and storage of Heat Transfer Hose and easily fits inside a
pickup truck box. All 4 units are equipped with Heat Transfer Hose
filled with Heat Transfer Fluid, leader hose, quick-connect brass
fittings, and electric foot pedal rewind system.
Pump Packs provide a dedicated pump to each extra hose loop,
maintaining a high flow rate for even distribution of BTUs over the
entire job surface. Increase thaw rate by 50% or increase curing
capacity by 200%. Use Pump Packs with HX Heat Xchangers™
and your Ground Heater provides clean, dry heat to enclosed
work spaces.
SPECIFICATIONS
Length
Width
Height
Fork lift
Lift eye
Electrical requirements
in
in
in
in
in
SPECIFICATIONS
48
42
55
yes
yes
120V AC, 60 Hz
Length
Width
Height
Weight (single pump)
Weight (dual pump)
Lift eye
ft
lbs
HHS 3002
2 x 1500
HTH, HTF
1,850
18.25
18.25
27
125
160
yes
gph
gph
265
530
PERFORMANCE
Model
Hoses
Fittings
Approximate weight
PUMP PACKS
in
in
in
lbs
lbs
HHS 2202
2 x 1100
HTH, HTF
1,550
HHS 1701
1 x 1700
HTH, HTF
1,350
HHS 1101
1 x 1100
HTH, HTF
1,120
Single pump pack capacity
Dual pump pack capacity
Electrical Requirements
Volts
Amps
single pump
dual pump
Motor
Hp (each)
RPM
PUMP PACKS
120V, 60 Hz
5.6
11.2
1/2
1,725
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Hydronic
Surface Heaters
30
31
HX-SERIES HEAT XCHANGERS™
RED WAVE™ BLANKETS
Powerful liquid-to-air heat exchangers, available in 3 sizes, bring
clean, dry heat to your workspace! Simply position HX Heat
Xchangers inside structure and aim where you’d like the heat to go.
Finish work is a breeze in a warm, dry environment and
comfortable employees are more productive.
Designed specifically to work with portable hydronic heating
systems, Red Wave blankets reflect heat downward. Thaw ground
faster and cure concrete more evenly. Compact and lightweight,
you will see huge savings in labor, storage and freight costs.
SPECIFICATIONS
SPECIFICATIONS
Model
Length
Width
Height
Weight
Lift eye
HX50
16
14
28
74
yes
Lenght
Width
Coverage
Style
Weight
in
in
in
lbs
in
HX100
21
18
36
143
yes
HX200
28
26
45
235
yes
PERFORMANCE
Model
Output
Btu/h
Air volume
cfm
Static pressure
wc
ELECTRICAL REQUIREMENTS
Volts
Amps
Hp
Rpm
HX50
50,000
710
0.4
HX100
100,000
1,315
0.4
HX200
200,000
2,400
1
120V / 60Hz
2.8
1/10
1,550
120V / 60Hz
4.0
1/4
1,625
120V / 60Hz
12.7
1
1,075
RED WAVE™ BLANKETS
ft
ft
sq. ft.
lbs
Red Wave™ Blankets can be configured for any site.
Cut it • tape it • customize it!
Water cannot permeate layered
closed-cell construction,
resulting in maintaining original
R-value and light weight.
125
6
750
reflective underside, double-bubble
50
Insulate your job site the simple
way with Red Wave™!
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Hydronic
Air Heaters
32
33
BOOSTER PUMPS
4-PORT REMOTE MANIFOLD
For heating enclosed workspaces:
Use the Booster Pump for applications requiring heat exchangers
to be placed further than 400 feet from the Pureheat Hydronic Air
Heater (or above 50 feet).
For thawing ground or curing concrete:
Use with Hose Handling System to thaw ground or cure concrete
with Pureheat Hydronic Air Heater. 4-Port supply/return manifold
with heavy duty brass quick-connects makes hook up of thawing,
curing, or Xchanger hoses easy.
For surface heating:
Use with hose handling system to thaw ground, prevent frost, or
cure concrete.
SPECIFICATIONS
Length
Width
Height
Weight
Lift eye
BOOSTER PUMPS
in
in
in
lbs
in
30-1/4
14
21
112
yes
PERFORMANCE
BOOSTER PUMPS
Pump capacity
GPM
Volts
Amps
Motor
Hp
rpm
45
SPECIFICATIONS
Length
Width
Height
Weight
Supply ports
Return ports
4-PORT REMOTE MANIFOLD
in
in
in
lbs
20-3/4
11-3/4
11-3/4
26
4
4
120V AC / 60Hz
15.8
1-1/2
3,450
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Hydronic
Air Heaters
34
35
HOSE HANDLING SYSTEMS 3004™
Powerful liquid-to-air heat exchangers, available in 3 sizes, bring
clean, dry heat to your workspace! Simply position HX Heat
Xchangers™ inside structure and aim where you'd like the heat to
go. Finish work is a breeze in a warm, dry environment. It keeps
projects on schedule and comfortable employees are more
productive.
Provides easy use and storage of additional Heat Transfer Hose for
cold weather concrete curing, faster thawing and frost prevention
applications. This rugged accessory easily fits inside a pickup
truck box. Unit is equipped with Heat Transfer Hose filled with
Heat Transfer Fluid, leader hose, quick-connect brass fittings, and
electric foot pedal rewind system.
SPECIFICATIONS
SPECIFICATIONS
Model
Length
Width
Height
Weight
Lift eye
HX50
16
14
28
74
yes
Length
Width
Height
Approximate weight
Fork lift
Lift eye
Electrical requirements
in
in
in
lbs
in
HX100
21
18
36
143
yes
HX200
28
26
45
235
yes
PERFORMANCE
Model
Output
Btu/h
Air volume
cfm
Static pressure
wc
Volts
Amps
Hp
Rpm
HX50
50,000
710
0.4
HX100
100,000
1,315
0.4
HX200
200,000
2,400
1
120V / 60Hz
2.8
1/10
1,550
120V / 60Hz
4.0
1/4
1,625
120V / 60Hz
12.7
1
1,075
in
in
in
lbs
48
42
55
1,850
yes
yes
120V AC / 60Hz
Model
Hoses
Fittings
ft
HHS 3004
4 x 750
HTH, HTF
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Air Heat /
Dehumidification
36
37
DUCTING
DUCT ADAPTOR KITS
For use with XHD, HD, 200, 300, 400, 700,
HX200 & MC5200
For use with XHD, HD, 300, 400 & 700
NON-INSULATED
INSULATED
DUCT COLOR
Grey
DUCT COLOR
Black
Black
Yellow
DIMENSIONS
12" ID x 25'
16" ID x 25'
20" ID x 25'
12" ID x 25'
16" ID x 25'
18" ID x 25'
20" ID x 25'
16" ID x 25'
20" ID x 25'
Yellow
REMOTE THERMOSTAT
For use with XHD, HD, 200, 300,
400 & 700
Control your jobsite climate remotely:
plug this Remote Theremostat into your
unit an run temperature sensor to
desire location. Includes 50' cord.
Customize your configuration of outlet air with duct adaptor kits.
ADAPTORS
DIMENSIONS
12" ID x 25'
16" ID x 25'
20" ID x 25'
20" ID x 25'
COMPATABLE WITH
XHD / HD
Cub 300
Cub 400
Cub 700
OUTLETS AND SIZES
2 - 12"
1 - 16"
1 - 20"
1 - 18"
2 - 12"
3 - 12"
2 - 16"
1 - 20"
3 - 16"
2 - 20"
HEAT XCHANGER™
DUCTING BRACKET
For use with XH200 Heat Xchanger
Add ductwork to your HX200 Heat
Xchanger with this easy to use Ducting
Bracket. Available in 12" or 16" sizes.
2.01.08
updated
2.01.08
updated
ACCESSORIES
For Air Heat /
Dehumidification
38
39
B VENT EXHAUST PIPE & RAIN CAP
REMOTE HUMIDISTAT
For use with Arctic Bear Cub 200, 300, 400 and 700.
For use with R55 and R110
ITEM
SIZE
B vent exhaust pipe
6" x 3'
8" x 3'
10" x 3'
8"
10"
6"
8"
10"
B vent exhaust pipe elbow
90°
90°
Rain cap
Control your jobsite climate remotely: plug this
Remote Humidistat into your unit and run
humidity sensor to desired location. Includes
50' cord with RCA connection. Range of
operation from 25-100% relative humidity.

climate control product guide

Transcription

Similar documents

seisco - Solar Direct

high pressure gss pumps

KEROSENE/DIESEL PORTABLE FORCED AIR HEATERS

Laser 73 (E) Zibro

When it absolutely, positively has to work

- Rural King

propane construction forced air heater

The Kero-Sun ``Moonlighter`` is equipped with electric iighting and

Airtronic 2-4 TD TS Parts 12-2012 ESPAR

LD SERIES - Brant Radiant Heaters Ltd

Moonlighter Owner`s Manual

Fuel Filtration Products

Chevrolet Equinox Fuel Cell

Ground Heater - Wacker Neuson

Crown Ministries - Source Water Protection

2014 Fuel Consumption Guide

CLEANERS ADDITIVES

Espar Idle Reduction Solutions

Fuel Filtration Systems

Crystal-Aire - Concealed Commercial Air Cleaners by

Supreme Catalog

Bounder Diesel