Phantom Manor - Haunted Dimensions

Transcription

Welcome, foolish mortal, to The Phantom Manor Paper Model Kit!
Ray Keim, at Haunted Dimensions, has created this free project solely for entertainment.
It is not to be repackaged or resold.
KEEP IT FREE!
When completed, the model is approximately 12 inches (30 cm) high, 11 inches (27.5 cm) wide and 13 inches (33.5 cm) deep.
Much time and effort has gone into the creation of this model of the Phantom Manor. The architectural, and artistic details are extremely
accurate, however some artistic license was taken, in order to translate the mansion to paper.
Please note that this project is not recommended for children. It requires a moderate degree of skill, and the use of an X-acto blade, which is
extremely dangerous. I HIGHLY recommend wearing protective eyewear when using an X-acto blade! Tips can snap and fly!
When printing the model, be sure that your printer is set to print at 100%. Each sheet has a logo, and page number graphic, which can be
compared with other sheets, to ensure that all of your pieces are printed at a uniform size. Color printing is recommended.
There are many pages to print, so be sure you have enough paper and ink! This model was designed to be printed on EPSON Matte Paper
Heavyweight. Using plain paper is not recommended.
The files are in .pdf format, so you will need a computer with Adobe Acrobat Reader installed.
I recommend using white glue, and applying it with a toothpick. Don’t use too much glue! Needle-nose tweezers are also very useful.
Become acquainted with the various pieces, and study the directions before you begin. The text instructions that accompany the illustrations are limited, so you will need a keen eye and a good sense of spatial orientation to assemble the Phantom Manor.
There are many folds in the model, and it is recommended that you score the fold first, using a dull X-acto, or other fine, blunt tipped
instrument. Black dashed lines represent a mountain fold (a fold which point upward), and orange dashed lines represent a valley fold (the
fold points downward). The orange dashed lines are accompanied by a red “+” at each end. These are to be used as pin guides to poke small
holes at the “+”, flip the sheet over, and score between the holes for a clean valley fold.
To avoid confusion, after cutting out a part, lightly write the part numbers on the back with a pencil.
I created this model for my own enjoyment, but choose to share it with others. By downloading this model, you agree that the success of
the final product is primarily determined by the patience and skill of the builder.
Have fun building your Phantom Manor, and good luck!
Bonne Chance!
There’s no turning back now!
http://www.haunteddimensions.raykeim.com/
Do not repackage or resell © Ray Keim 2008
Fold indicators:
=
=
mountain fold (points to you)
valley fold (points away from you)
To make a valley fold
use a pin to poke a hole
at each red +
Score and assemble the mansion walls. Be sure to cut all slots wide enough
to allow easy tab insertions (a single cut may not be wide enough).
If you choose to cut out the windows, be sure to attach the second floor shutters BEFORE gluing the window inserts.
1st - Attach Shutters
2nd - Attach Optional
Window Inserts
14A
Tower
PAGE
A
1 of 7
A free project from http://www.haunteddimensions.raykeim.com
6A
Top
Attach top and bottom supports.
6A (top) and 5A (bottom)
Glue close to edges.
5A
Bottom
7A
Left Side Porch Floor
15D
8A
Front Porch Floor
8A
Rear Walk & Steps
Rear Walkway
PAGE
B
2 of 7
15B 15C 20D
19H
Front Right Steps Front Left Steps Rear Corner Steps
Right Side Steps
15A
Front Center Steps
10E
10D
Right Side Steps Wall
Left Front Steps Wall
10C
Right Front Steps Wall
10B
Front Steps Wall
Middle Slot
Attach 7A first, then attach
8A and 15D.
10F
Front Tower Balcony
15D
Rear Walkway
8A
Front Porch Floor
10C
15C
Front Left Steps
15A
7A
Front Cenyer Steps
10D
10B
Front Steps Wall
15B
Front Right Steps
PAGE
C
3 of 7
14B
Right Side Porch Pillars
16A
Rear Walk and Steps
19H
Right Side Steps
9A
Right Side Porch
20D
Rear Corner Steps
11D
Right Side Balcony Roof
14C
Right Side Balcony Pillars
9B
Rear Shed
11C
Right Side Balcony
10E
PAGE
D
4 of 7
13A
13B
Front Porch Roof
Front Porch Roof
11B
Front Porch Pillars
11A
Front Porch Pillars
12A
Porch Pillars
Bend roof side pieces
before attaching to 17A
18C
18D
Attach all roof sides using tabs as shown.
Glue support 17B
across 17A as shown
17A
Main Roof
17B
Support Strut
18B
18C
18D
17A
Main Roof
18A
PAGE
E
5 of 7
12G
19B
Lightning Rod
12E
Tower Roof Top
Tower Crest
19Cx2
19Dx2
Side Dormer Window
Tower Side Dormers
Fold under
19Dx2
Side Dormer Window
19A
Tower Roof
19Cx2
Tower Side Dormers
14A
19F
Tower
Front Dormer Window
19E
Front Tower Dormer
19E
Front Tower Dormer
19Cx2
Tower Side Dormers
14A
Tower
12D
20Fx4
Rear Crest
Dormers
12B
Right Crest
12C
Left Crest
20Gx4
Dormers Windows
Align bottom edges
20Fx4
Dormers
PAGE
F
6 of 7
20C
20B
Fat Chimney
Thin Chimney
20B
20B
Thin Chimney
Thin Chimney
20A
Short Chimney
Top View
20A
Short Chimney
20C
Fat Chimney
20C
Fat Chimney
20A
Short Chimney
Congratulations!
Welcome to your Phantom Manor!
Bienvenue
a votre Phantom Manor!
12F
Front Tower Balcony Rail
13C
Porch Roof Rail
Rear slot
Front slot
13D
Front Porch Roof Rail
PAGE
G
7 of 7
<slot
<slots
<slot
<slot
1B
x4
Shutters
1A
Front Wall
slot>
slots>
slot>
slot>
slot>
Glue to 3A
PAGE
1
of 23
Glue to 4A
2A
Left Wall
<slot
<slots
1B
x6
Shutters
<slot
<slot
<slot
<slot
<slot
<slot
Glue to 1A
PAGE
2
of 23
<slots
3A
Right Wall
<slot
<slots
Glue to 4A
PAGE
3
of 23
slot>
4A
RearWall
slot>
PAGE
4
of 23
5A
Bottom
PAGE
5
of 23
6A
Top
PAGE
6
of 23
slot>
slot>
>
slot>
cut
>
7A
slot>
PAGE
7
of 23
<slot
<slot
8A
Front Porch Floor
<slot
<slot
PAGE
8
of 23
9B
Rear Shed
slot>
9A
Right Side Porch
slot>
PAGE
9
of 23
10F
Front Tower Balcony
<slots
10E
10A
Front Tower
<slot
10C
PAGE
10B
Front Steps Wall
10D
10
of 22
11C
Right Side Balcony
11D
Right Side Balcony Roof
11A
Front Porch Pillars
slot>
slot>
11B
Front Porch Pillars
PAGE
11
of 23
12E
Tower Crest
12D
Rear Crest
12B
Right Crest
12C
Left Crest
12A
Porch Pillars
12F
For Transparency version
see page 21
PAGE
12
of 23
13A
13B
Front Porch Roof
o1
3A
Front Porch Roof
Gl u
et
13C
Porch Roof Rail
For Transparency versions
of rails, see page 22
13D
PAGE
13
of 23
14A
Tower
<slots
14B
of pillars, see page 22
14C
of pillars, see page 22
1B
Shutters
PAGE
14
of 23
15A
Front Center Steps
15B
Front Right Steps
15D
Rear Walkway
15C
Front Left Steps
PAGE
15
of 23
<slot
16A
Rear Walk and Steps
<slot
PAGE
16
of 23
17A
Main Roof
<slots
<slots
<slots
<slot
<slots
PAGE
17
of 23
<slot
<slot
<slot
<slot
<slot
17B Support Strut
<slot
<slot
<slot
<slot
18D
<slot
18A
Right Side Roof
18C
Left Side Roof
18B
Rear Roof
PAGE
18
of 23
19A
<slot
<slot
<slot
<slot
Tower Roof
19Cx2
Tower Side Dormers
<slots
<slot
19F
Tower Dormer Window
19Dx2
Tower Dormer Windows
19E
19B
Front Tower Dormer
<slot
Tower Roof Top
<slot
19H
Right Side Steps
PAGE
12G
Lightning Rod
19
of 23
20A
Short Chimney
20D
Rear Corner Steps
20Gx4
Dormer Windows
20B
Thin Chimney
20Fx4
Dormers
20C
Fat Chimney
PAGE
20
of 23
12E
Tower Crest
12D
Rear Crest
12B
Right Crest
12C
Left Crest
12A
Porch Pillars
12G
Lightning Rod
12F
Print on
Transparency
PAGE
21
of 23
14C
Print on
Transparency
11A
Front Porch Pillars
14B
11B
Front Porch Pillars
13C
Porch Roof Rail
PAGE
13D
22
of 23
23Ax12
Optional Window Inserts
23B
Optional Window Insert
for wall 3A
23D
Tower
23C
Tower
23D
Tower
PAGE
23
of 23

Phantom Manor - Haunted Dimensions

Transcription

Similar documents

Technical data

MAY 2014 - UK Slot Car Festival

Pittypat`s Porch News: June 2011

nexto video storage doc

Windows Embedded CE 6.0

Eiffel Tower - University Games

WELCOME TO CAESARS PALACE

Map 8c Area from which Beckford`s Tower is Visible (Landmark 2)

EFAS Wandtafel Mitte

PDF-Document 3,15 MB - Sector