Spare Parts DL 2012-05.indd

Transcription

*)
CUNEI DI RINFORZO OPTIONAL
OPTIONAL STONE DEFLECTORS
59
60
59
23 - A PARTIRE DA 2012 / 11
FROM 2012 / 11
35 - FINO AL 2012 / 11
UNTIL 2012 / 11
DELFINO DL
DELFINO SUPER
Cod: F07011019
2012-06
*) Valido per Paesi UE
*) Valid for EU member countries
*) Gilt für EU-Mitgliedsländer
*) Valable dans le Pays UE
*) Válido para Países UE
- A PARTIRE DA 2012 / 11
FROM 2012 / 11
36 - FINO AL 2012 / 11
UNTIL 2012 / 11
IT
EN
DE
FR
ES
PARTI DI RICAMBIO
SPARE PARTS
ERSATZTEILE
PIECES DÉTACHÉES
PIEZAS DE REPUESTO
PARTI DI RICAMBIO
PIECES DÈTACHÈES
Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessionari di zona e devono
essere sempre corredate dalle seguenti indicazioni:
- Tipo, modello e numero di matricola dell’attrezzatura. Tali dati sono stampigliati nell’apposita
targhetta di cui è dotata ogni attrezzatura.
- Numero di codice della parte richiesta rilevabile dal catalogo ricambi.
- Descrizione del particolare e quantità richiesta.
- Numero della tavola.
- Mezzo di trasporto. Nel caso questa voce non sia specificata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti
a cause di forza maggiore.
Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e
pericolo del committente anche se venduta franco destino.
NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando
la macchina dalla parte posteriore. Le eccezioni saranno indicate.
Les ordres doivent être effectués auprés de nos concessionaires de zone en précisant les
indications suivantes:
- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque
d’identification de chaque outil.
- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.
- Description de la piéce et quantité requise.
- Numéro de plan.
- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Constructeur, bien que soucieux
de ce service, ne répond pas des retards d’expédition pour des causes de force majeure.
Les frais de transport sont toujours à la charge du destinataire. La marchandise voyage aux
risques et périls de l’acheteur même si vendue franco de port.
N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est
entendue, comme de la figure, en regardant la machine de derriere dans le sens de marche.
SPARE PARTS
RESPUESTOS
Orders must be transmitted through our area dealers and should always include the following
indications:
- Type, model and serial number of the machine. These data are punched on the data plate
with which every implement is equipped.
- Code number of the required spare part. This will be found in the spare parts catalogue.
- Description of the part and required quantity.
- Table number.
- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular
care to this service, shall not be held responsible for delays in delivery caused by cases of force
majeure.
Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s
risk and peril even when sold ex destination.
NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are
referred, as in the figure, to a rear view of them. Exceptions will be indicated.
Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las
siguientes indicaciones:
- Tipo, modelo y número de matrícula del equipo. Dichos datos están impresos en la relativa
placa presente en el equipo.
- Número de código de la parte requerida presente en el catálogo respuestos.
- Descripcíon de la pieza y cantidad requerida.
- Numero de illustración.
- Medio de transporte. En caso que este ítem no esté especificado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de
env’o debidos a causas de fuerza mayor.
Los gastos de transporte se consideran siempre a cargo del destinatario. La mercandería viaja
bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.
N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la figura, mirando la máquina por la parte trasera. Se indicarán las excepciones.
ERSATZTEILE
Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung
sind stets die folgenden Angaben zu machen:
- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit
dem jedes Gerät versehen ist.
- Artikel Nr. der erforderlichen Ersatzteile. Diese stehen im Ersatzteil-Katalog.
- Beschreibung des Ersatzteils und die erforderliche Stückzahl.
- Tafelnummer.
- Versandmittel. Wenn dieser Punkt nicht spezifiziert wird, haftet die Herstellerfirma nicht für
etwaigen Lieferverzug aufgrund höherer Gewalt, auch wenn er diesen Service besonders aufmerksam abwickelt.
Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr
und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.
N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwärtige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen werden gezeigt.
2
cod. F07011019
Nr. Tav.
TAV. 010A
TAV. 010B
TAV. 020
TAV. 030A
TAV. 030B
TAV. 040
TAV. 050A
TAV. 050B
TAV. GB01D
TAV. PK01D
TAV. SK01D
TAV. SP01D
TAV. RI01D
TAV. FL01D
TAV. LI01D
TAV. RET01D
TAV. OPT01
TAV. PROT01
CARD.1
CARD.2
CARD.3
Nr. Tav.
TAV. 010A
TAV. 010B
TAV. 020
TAV. 030A
TAV. 030B
TAV. 040
TAV. 050A
TAV. 050B
TAV. GB01D
TAV. PK01D
TAV. SK01D
TAV. SP01D
TAV. RI01D
TAV. FL01D
TAV. LI01D
TAV. RET01D
TAV. OPT01
TAV. PROT01
CARD.1
CARD.2
CARD.3
Nr. Tav.
TAV. 010A
TAV. 010B
TAV. 020
TAV. 030A
TAV. 030B
TAV. 040
TAV. 050A
TAV. 050B
TAV. GB01D
TAV. PK01D
Descrizione
Telaio 3° punto DL 1300-1500-1800
Telaio 3° punto DL 2000 - DL SUPER 2300-2500-3000
Corpo trasmissione
Riduttore centrale DL
Riduttore centrale DL SUPER
Cambio
Regolazione meccanica dei rulli
Regolazione idraulica dei rulli
Gr. rullo gabbia
Gr. rullo packer
Gr. rullo spiropacker
Gr. rullo spuntoni
Gr.rullo risaia
Gr.rullo flangiato
Gr.rullo liscio
Gr.rullo rete
Optionals
Protezioni CE
Albero card. standard
Albero card. optional
Albero card. optional
Description
Complete 3rd point DL 1300-1500-1800
Complete 3rd point DL 2000 - DL SUPER 2300-2500-3000
Transmission unit
Central reduction unit DL
Central reduction unit DL SUPER
Gearbox
Rollers mechanical adjustment
Rollers hydraulic adjustment
Cage roller unit
Packer roller unit
Spiral roller unit
Spike roller unit
Rice roller unit
Light duty packer roller
Smooth roller unit
Green roller unit
Optionals
EC protections
Standard cardan shaft
Optional cardan shaft
Optional cardan shaft
Beschreibung
3 punkt komplett DL 1300-1500-1800
3 punkt komplett DL 2000 - DL SUPER 2300-2500-3000
Antriebskörper
Untersetzungetriebe DL
Untersetzungetriebe DL SUPER
Wechselgetriebe
Mechanische Einstellung der Walzen
Hydraulische Einstellung der Walzen
Stabwalze
Zahnpackerwalze
cod. F07011019
Pag.
4
6
8
10
12
14
16
16
18
20
22
24
26
28
28
30
32
34
36
38
40
Pag.
4
6
8
10
12
14
16
16
18
20
22
24
26
28
28
30
32
34
36
38
40
Pag.
4
6
8
10
12
14
16
16
18
20
TAV. SK01D
TAV. SP01D
TAV. RI01D
TAV. FL01D
TAV. LI01D
TAV. RET01D
TAV. OPT01
TAV. PROT01
CARD.1
CARD.2
CARD.2
Nr. Tav.
TAV. 010A
TAV. 010B
TAV. 020
TAV. 030
TAV. 030
TAV. 040
TAV. 050A
TAV. 050B
TAV. GB01D
TAV. PK01D
TAV. SK01D
TAV. SP01D
TAV. RI01D
TAV. FL01D
TAV. LI01D
TAV. RET01D
TAV. OPT01
TAV. PROT01
CARD.1
CARD.2
CARD.2
Nr. Tav.
TAV. 010A
TAV. 010B
TAV. 020
TAV. 030
TAV. 030
TAV. 040
TAV. 050A
TAV. 050B
TAV. GB01D
TAV. PK01D
TAV. SK01D
TAV. SP01D
TAV. RI01D
TAV. FL01D
TAV. LI01D
TAV. RET01D
TAV. OPT01
TAV. PROT01
CARD.1
CARD.2
CARD.3
Spiropackerwalze
Zinkenwalze
Reiswalze
Krumenpackerwalze
Glattwalze
Greenwalze
Extras
EC Schutz
Gelenkwelle (standard)
Gelenkwelle (optional)
Gelenkwelle (optional)
Description
3eme point compl. DL 1300-1500-1800
3eme point compl. DL 2000 - DL SUPER 2300-2500-3000
Corps de transmission
Réducteur central DL
Réducteur central DL SUPER
Boîte de vitesses
Réglage mécanique des rouleaux
Réglage hydraulique des rouleaux
Gr. rouleau cage
Gr. rouleau packer
Gr. rouleau spiropacker
Gr. rouleau a dents
Gr. rouleau pour riz
Gr. rouleau à flasques
Gr. rouleau lis
Gr. rouleau green
Options
Protections CE
Arbre à cardans standard
Arbre à cardans optional
Arbre à cardans optional
Descripcion
Tercer punto completo DL 1300-1500-1800
Tercer punto completo DL 2000 - DL SUPER 2300-2500-3000
Cuerpo trasmision
Reductor central DL
Reductor central DL SUPER
Cambio
Regulación mecánica rodillos
Regulación hidraulica rodillos
Gr. rodillo de barras
Gr. rodillo packer
Gr. rouleau spiropacker
Gr. rodillo de dientes
Gr. rodillo de arroz
Gr. rodillo a flasques
Gr. rodillo liso
Gr. rodillo green
Options
Protecciones CE
Arbol cardánico standard
Arbol cardánico opcional
Arbol cardánico opcional
22
24
26
28
28
30
32
34
36
38
40
Pag.
4
6
8
10
12
14
16
16
18
20
22
24
26
28
28
30
32
34
36
38
40
Pag.
4
6
8
10
12
14
16
16
18
20
22
24
26
28
28
30
32
34
36
38
40
3
TAV.010A
DELFINO 1300
1500
1800
23 - A PARTIRE DA 2012 / 11
FROM 2012 / 11
35 - FINO AL 2012 / 11
UNTIL 2012 / 11
- A PARTIRE DA 2012 / 11
FROM 2012 / 11
36 - FINO AL 2012 / 11
UNTIL 2012 / 11
4
cod. F07011019
TAV.010A
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
M20400598
M20400401
F01060206
F01010135
F01010398
F20100034
M20400508
F02200529
F01230269
M20400400
M20400597
F01220048
M24100569
F01500023
F01220070
F20110730
F01010317
F01220034
F01010250
M20400418
M20400569
F20100033
F20120400
M58100930
M20400417
F01220033
F20100049
F01010362
M20400422
F01410064
M20400423
F01220081
F01220059
F20100133
F20100074
PROTEZ. LATERALE INFERIORE SX
PROTEZIONE LATERALE MOBILE SX
VITE M12X1,75X30 U5731* 8.8 ZN
VITE M16X1,5 X180 5738 8.8 BR
VITE M22X1,5X 70 U5740 8.8 ZN
PERNO D19 L40 C43
ZN
BRACCIO COLLEGAM. RULLO
SPINA SCATTO D.11
ZN
DADO M22X 1,5 D985 6S ZN
PROTEZIONE LATERALE MOBILE DX
PROTEZ. LATERALE INFERIORE DX
DADO M12X1,75 D980 8 ZN
MOLLA SUPERIORE MARTINETTO
ROS. 17 X45X6 D6340 C50 ZD
DADO M16X 1,5 D980 8 ZN
CAV.Q.M10X 1,5X 30 91X 99 ZN
VITE M14X1,5X 35 U5740 8.8 ZN
DADO M10X1,25 D980 8 ZN
VITE M10X1,25X30 U5740 8.8 ZN
BASE 3° PUNTO SX
CASTELLO 3° PUNTO L.550
PERNO D19 L137 C43
ZN
GANCIO SOSTEGNO CARDANO
CATENELLA L=476
BASE 3° PUNTO DX
DADO M10X 1,5 D980 8 ZN
PERNO D22 L86 C43
ZN
VITE M18X1,5 X45 U5740 8.8 ZN
STAFFA ATTACCO BARRA
ROS.M10 10,5X 20X 2 U6592 ZN
CONTROSTAFFA ATTACCO BARRA
DADO M18X 1,5 D980 8 ZN
DADO M14X 1,5 D980 8 ZN
PERNO D25 L122 C43
ZN
PERNO D28 L109 C43 SPINA 3°P.
BOTTOM LEFT SIDE PROTECTION
LEFT SIDE PROTECTION
BOLT M12X1,75X30
BOLT M 16X1,5X170
BOLT M22X1,5X 70 U5740 8.8 ZB
BOLT D=19 L=40
ROLLER CONNECTING ARM
SNAP PIN D.11
SELF LOCKING NUT M22X1,5
RIGHT SIDE PROTECTION
BOTTOM RIGHT SIDE PROTECTION
NUT M12X1,75 D980 8 ZN
SPRING
ELASTIC DISK
NUT M16X 1,5 D980 8 ZB
STRIKER M10X 1,5X 30 91X 99 ZB
BOLT M14X1,5X35 U5740 8.8 ZN
NUT M10X1,25 D980 8 ZB
BOLT M10X1,25X30 U5740 8.8 ZB
LEFT BASE LINKAGE
COMPLETE 3RD POINT L.550
BOLT D=19 L=137
SHAFT HOOK SUPPORT
ASSEMBLY CHAIN DMP L=476
RIGHT BASE LINKAGE
NUT M10X 1,5 D980 8 ZN
BOLT D22 L86 C43 ZN
BOLT M 18X1,5X45
STIRRUP
WASHER M10 10,5X20X2 U6592 ZN
BAR ATTACH COUNTER STIRRUP
SELF LOCKING NUT M18X1,5 980V
NUT M14X 1,5 D980 8 ZB
PIN D25 L122 C43 ZN
PIN FOR BAR LINKAGE
PROTECTION INFÉRIEUR GAUCHE
PROTECTION LAT. GAUCHE
VIS M12X1,75X30
VIS M 16X1,5X170
VIS M22X1,5X 70 U5740 8.8 ZB
GOUJON D=19 L=40
BRAS DE CONNECTION ROULEAU
FICHE A DETENTE D.11
ECROU AUTOBL. M22X1,5
PROTECTION LAT.DROITE
PROTECTION INFÉRIEURE DROITE
ECROU M12X1,75 D980 8 ZN
RESSORT
DISQUE ELASTIQUE
ECRO.M16X 1,5 D980 8 ZB
BUTEE M10X 1,5X 30 91X 99 ZB
VIS M 14X1,5X35
ECRO.M10X1,25 D980 8 ZB
VIS M10X1,25X30 U5740 8.8 ZB
BASE ATTELAGE GAUCHE
3EME POINT COMPL. L.550
GOUJON D=19 L=137
SUPPORT CARDAN
CHAINE L=476
BASE ATTELAGE DROIT
ECROU M10X 1,5 D980 8 ZN
GOUJON D.22
VIS M 18X1,5X45
ETRIER
RONDELL.M10 10,5X20X2 U6592 ZN
CONTRE ETRIER ATTELAGE BARRE
ECROU AUTOBL. M18X1,5 980-V
ECROU M14X 1,5 D980 8 ZB
BOULON D25 L122 C43 ZN
GOUJON ATTELAGE BARRE
UNTERE LINKS SEITENSCHUTZ
SEITENSCHUTZ LINKS
SCHRAUBE M12X1,75X30
SCHRAUBE M 16X1,5X170
SCHR.M22X1,5X 70 U5740 8.8 ZB
STIFT D=19 L=40
WALZE VERBINDUNGSARM
EINRASTSTIFT D.11
SELBSTSPERR.MUTTER M22X1,5
RECHTE SEITENSCHUTZ
UNTERE RECHTS SEITENSCHUTZ
SCHEIBE M12X1,75 D980 8 ZN
FEDER
ELASTISCHE SCHEIBE
MUTT.M16X 1,5 D980 8 ZB
ANSCHLAG M10X 1,5X 30 91X 99
MUTT.M10X1,25 D980 8 ZB
SCHR.M10X1,25X30 U5740 8.8 ZB
BASISVERB. LINKS
3. PUNKT KOMPLETT L.550
STIFT D=19 L=137
GELENKWELLE - HACKEN
KETTE L=476
BASISVERB. RECHTS
MUTTER M10X 1,5 D980 8 ZN
BOLZEN D.22
BUEGEL
SCHEIBE M10 10,5X20X2 U6592 ZN
BUEGEL UNTERLENKERANSCHLUESSE
SELBSTSP.MUTT. M18X1,5 980-V
MUTTER M14X 1,5 D980 8 ZB
BOLZEN D25 L122 C43 ZN
VERB.BOLZEN SCHUTZHOLM
PROTECCIÓN INFERIOR IZQ.
PROTECCION LATERAL IZQUIERDO
TORNILLO M12X1,75X30
TORNILLO M 16X1,5X170
TORN.M22X1,5X 70 U5740 8.8 ZB
PERNO D=19 L=40
BRAZO DE CONEXIÓN RODILLO
CLAVIJA DE MUELLE D.11
DADO AUTOBL. M22X1,5
PROTECCION LATERAL DERECHO
PROTECCIÓN INFERIOR DER.
TUERCA M12X1,75 D980 8 ZN
MUELLE
DISCO ELASTICO
TUER.M16X 1,5 D980 8 ZB
EL. DE EMPALME M10X 1,5X 30
TUER.M10X1,25 D980 8 ZB
TORN.M10X1,25X30 U5740 8.8 ZB
BASE ATAQUE IZQUIERD
TERCER PUNTO COMPL. L.550
PERNO D=19 L=137
SOPORTE CARDAN
CADENA L=476
BASE ATAQUE DERECHO
TUERCA M10X 1,5 D980 8 ZN
PERNO D.22
ESTRIBO
ARAND. M10 10,5X20X2 U6592 ZN
CONTRE ESTRIBO ENGANCHE BARRE
DADO AUTOBL. M18X1,5 980-V
TUERCA M14X 1,5 D980 8 ZB
PERNO D25 L122 C43 ZN
PERNO ATAQUE BARRA
cod. F07011019
5
TAV.010B
DELFINO 2000
DELFINO SUPER 2300
DELFINO SUPER 2500
DELFINO SUPER 3000
6
cod. F07011019
POS
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
CODICE
M20400598
M20400401
F01060206
F01010135
F01010398
F20100034
M20400508
F02200529
F01230269
M20400400
M20400597
F01220048
M24100569
F01500023
F01220070
F01010128
M36200241
F01010317
F01220034
F01010250
M20400533
M20400567
F20100133
M58100930
M20400532
F20100074
F01010362
M20400422
F01410168
M20400423
F01220081
F01220059
F20120400
cod. F07011019
DESCRIZIONE
DESCRIPTION
PROTEZ. LATERALE INFERIORE SX
PROTEZIONE LATERALE MOBILE SX
VITE M12X1,75X30 U5731* 8.8 ZN
VITE M16X1,5 X180 5738 8.8 BR
VITE M22X1,5X 70 U5740 8.8 ZN
PERNO D19 L40 C43
ZN
BRACCIO COLLEGAM. RULLO
SPINA SCATTO D.11
ZN
DADO M22X 1,5 D985 6S ZN
PROTEZIONE LATERALE MOBILE DX
PROTEZ. LATERALE INFERIORE DX
DADO M12X1,75 D980 8 ZN
MOLLA SUPERIORE MARTINETTO
ROS. 17 X45X6 D6340 C50 ZD
DADO M16X 1,5 D980 8 ZN
VITE M16X1,5X130 U5738 8.8 ZN
STAFFA PER TUBO DA 80
VITE M14X1,5X 35 U5740 8.8 ZN
DADO M10X1,25 D980 8 ZN
VITE M10X1,25X30 U5740 8.8 ZN
BASE 3° PUNTO SX
CASTELLO 3° PUNTO L.760
PERNO D25 L122 C43
ZN
CATENELLA L=476
BASE 3° PUNTO DX
PERNO D28 L109 C43 SPINA 3°P.
VITE M18X1,5 X45 U5740 8.8 ZN
STAFFA ATTACCO BARRA
ROS.M30 31X 56X 4 U6592 ZN
CONTROSTAFFA ATTACCO BARRA
DADO M18X 1,5 D980 8 ZN
DADO M14X 1,5 D980 8 ZN
GANCIO SOSTEGNO CARDANO
BOTTOM LEFT SIDE PROTECTION
LEFT SIDE PROTECTION
BOLT M12X1,75X30
BOLT M 16X1,5X170
BOLT M22X1,5X 70 U5740 8.8 ZB
BOLT D=19 L=40
ROLLER CONNECTING ARM
SNAP PIN D.11
RIGHT SIDE PROTECTION
BOTTOM RIGHT SIDE PROTECTION
NUT M12X1,75 D980 8 ZN
SPRING
ELASTIC DISK
NUT M16X 1,5 D980 8 ZB
BOLT M 16X1,5X130
STIRRUP
BOLT M14X1,5X35 U5740 8.8 ZN
NUT M10X1,25 D980 8 ZB
BOLT M10X1,25X30 U5740 8.8 ZB
LEFT BASE LINKAGE
COMPLETE 3RD POINT
PIN D25 L122 C43 ZN
ASSEMBLY CHAIN DMP L=476
RIGHT BASE LINKAGE
PIN FOR BAR LINKAGE
BOLT M 18X1,5X45
STIRRUP
WASHER M30 31X56X4 U6592 ZN
BAR ATTACH COUNTER STIRRUP
SELF LOCKING NUT M18X1,5 980V
NUT M14X 1,5 D980 8 ZB
SHAFT HOOK SUPPORT
DESCRIPTION
PROTECTION INFÉRIEUR GAUCHE
PROTECTION LAT. GAUCHE
VIS M12X1,75X30
VIS M 16X1,5X170
VIS M22X1,5X 70 U5740 8.8 ZB
GOUJON D=19 L=40
BRAS DE CONNECTION ROULEAU
PROTECTION LAT.DROITE
PROTECTION INFÉRIEURE DROITE
RESSORT
DISQUE ELASTIQUE
ECRO.M16X 1,5 D980 8 ZB
VIS M 16X1,5X130
ETRIER
VIS M 14X1,5X35
ECRO.M10X1,25 D980 8 ZB
VIS M10X1,25X30 U5740 8.8 ZB
BASE ATTELAGE GAUCHE
3EME POINT COMPL.
BOULON D25 L122 C43 ZN
CHAINE L=476
BASE ATTELAGE DROIT
GOUJON ATTELAGE BARRE
VIS M 18X1,5X45
ETRIER
RONDELLA M30 31X56X4 U6592 ZN
CONTRE ETRIER ATTELAGE BARRE
ECROU AUTOBL. M18X1,5 980-V
SUPPORT CARDAN
BENENNUNG
DESCRIPCION
UNTERE LINKS SEITENSCHUTZ
SEITENSCHUTZ LINKS
SCHR.M22X1,5X 70 U5740 8.8 ZB
STIFT D=19 L=40
WALZE VERBINDUNGSARM
EINRASTSTIFT D.11
RECHTE SEITENSCHUTZ
UNTERE RECHTS SEITENSCHUTZ
SCHEIBE M12X1,75 D980 8 ZN
FEDER
ELASTISCHE SCHEIBE
MUTT.M16X 1,5 D980 8 ZB
BUEGEL
MUTT.M10X1,25 D980 8 ZB
SCHR.M10X1,25X30 U5740 8.8 ZB
BASISVERB. LINKS
3. PUNKT KOMPLETT
BOLZEN D25 L122 C43 ZN
KETTE L=476
BASISVERB. RECHTS
VERB.BOLZEN SCHUTZHOLM
BUEGEL
SCHRAUBE M30 31X56X4 U6592 ZN
BUEGEL UNTERLENKERANSCHLUESSE
SELBSTSP.MUTT. M18X1,5 980-V
GELENKWELLE - HACKEN
TAV.010B
PROTECCIÓN INFERIOR IZQ.
PROTECCION LATERAL IZQUIERDO
TORN.M22X1,5X 70 U5740 8.8 ZB
PERNO D=19 L=40
BRAZO DE CONEXIÓN RODILLO
DADO AUTOBL. M22X1,5
PROTECCION LATERAL DERECHO
PROTECCIÓN INFERIOR DER.
MUELLE
DISCO ELASTICO
TUER.M16X 1,5 D980 8 ZB
ESTRIBO
TUER.M10X1,25 D980 8 ZB
TORN.M10X1,25X30 U5740 8.8 ZB
BASE ATAQUE IZQUIERD
TERCER PUNTO COMPL.
PERNO D25 L122 C43 ZN
CADENA L=476
BASE ATAQUE DERECHO
PERNO ATAQUE BARRA
ESTRIBO
ARANDELLA M30 31X56X4 U6592 ZN
CONTRE ESTRIBO ENGANCHE BARRE
DADO AUTOBL. M18X1,5 980-V
SOPORTE CARDAN
7
TAV.020
CUNEI DI RINFORZO OPTIONAL
OPTIONAL STONE DEFLECTORS
59
60
59
8
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
M27100210
F20110044
M38100301
M38100218
F01010289
F01480123
M26400306
M38100214
F04010188
F02050447
F03010726
F01220034
F03150631
M20413500
M20415500
M20418500
M20420500
M20423500
M20425500
M20430500
M27100306
M27100309
M19400308
M27100305
F02010144
M26413700
M26415700
M26418700
M26420700
M26423700
M26425700
M26430700
F04010179
F03010684
M38100344
F01480112
F20110012
F03010503
M52400519
M52400513
M52400514
F01010254
M20400112
M20400123
M20400111
F01410064
F01010244
F03011158
F02050204
M36500311
M36500312
M36100306
M36500313
F02050471
F04010192
M19400307
M26400309
M27100209
F01220034
M20400412
COLTELLO DC/DS/DL DX 90X12
VITE M16X1,5 X 50 SPEC 12.9 ZD
SUPPORTO COLTELLI LATERALE
FERMO VITE COLTELLI DC-DL-DS
VITE M12X1,25X35 U5740 10.9 DL
ROS.G 12,5X22,9X 4 EX.C70 ZN
FLANGIA SUPP.INFERIORE DC
ANELLO COMBI 65X85X13/17
CUSC.D50 D90 B20 6210 C3
ANELLO E. DI 90X 3 U7437 C70
ANELLO OR 123.43X3.53 NBR
DADO M10X1,25 D980 8 ZN
TAPPO CON MAGNETE M18X1,5
COMP. CORPO TRASMISSIONE 1300
DISTANZIALE 50,9X63,5X20,5
GUARNIZIONE FLEXOID 5/10
FLANGIA INTERNA
INGRANAGGIO
GHIERA AU.GUP M45X1,5 T.4H ZN
COPERCHIO CORPO TRAS. MOD.1300
CUSC.D35 D72 B17 6207 2RSC3
ANELLO OR 94,84X3,53 NGR
SUPPORTO CUSCINETTO SUPERIORE
ROSET.GROWER M10 ZN EXTRA P.
VITE M10X1,25X 35 5738 10.9 PL
ANEL. OR 34,52X3,53 NBR
TAPPO
PROLUNGA TAPPO CARICO OLIO ZN
TAPPO CON ASTINA
VITE M10X1,25X35 U5740 8.8 ZN
ASSIEME RIDUTTORE DELFINO
RIDUTTORE DI VEL.TÀ DS RPM 352
ASSIEME CAMBIO DELFINO
ROS.M10 10,5X 20X 2 U6592 ZN
VITE M10X1,25X25 U5740 8.8 ZN
GUARNIZIONE IN SILICONE D=6
ANELLO E. DE 55X 3 U7436 C70
ROSETTA D=65 D=55 L=0,1
ROSETTA D=65 D=55 L=0.05
INGRANAGGIO LATERALE DM
DISTANZ. D=67 D=55 L=16.5
ANELLO E. DI100X 3 U7437 C70
CUSC.D55 D100 B21 6211 53 KN
FLANGIA SUPP.INFERIORE DM
SUPPORTO COLTELLI CENTRALE
COLTELLO DC/DS/DL SX 90X12
DADO M10X1,25 D980 8 ZN
CUNEO
RIGHT BLADE DC/DS/DL 90X12
BOLT M 16X1,5X50
SIDE BLADE SUPPORT
KNIVES FASTENING BOLT
BOLT M12X1,25X35 U5740 10.9
WASHER M12 ZGP EXTRA P.
FLANGE BOTTOM SUPPORT DC
OIL SEAL 65X85X13/17 SPEC.
BEARING D50 D90 B20 6210 C3
SEEGER RING DI 90X3 U7437 C70
GASKET OR 123.43X3.53 NBR
NUT M10X1,25 D980 8 ZB
COVER
TRANSMISSION BOX 1300
SPACER
GASKET MM.0,5
INNER FLANGE
GEAR
SELF LOCKING NUT M45X1,5 T.4H
UPPER PLATE 1300
UPPER PLATE 1500
UPPER PLATE 1800
UPPER PLATE 2000
UPPER PLATE 2300
UPPER PLATE 2500
UPPER PLATE 3000
BEARING D35 D72 B17 6207 2RSC3
GASKET OR 94,84X3,53 NBR
BEARING SUPPORT
GROWER WASHER D.10
BOLT M 10X1,25X35
GASKET OR 34,52X3,53 NBR
COVER
FRAME EXTENSION
PLUG
BOLT M 10X1,25X35
COMPLETE GEAR BOX
GEARBOX W/BEVEL GEAR PAIR
COMPLETE GEAR BOX DELFINO
BOLT M10X1,25X25 U5740 8.8 ZN
GASKET D=6
SEEGER RING D.55
WASHER D=65 D=55 L=0,1
WASHER D=65 D=55 L=0.05
GEAR
SPACER D=67 D=55 L=16.5
SEEGER RING D.100
BEARING D55 D100 B21 6211 53KN
BEARING LOWER SUPPORT
CENTR. BLADE SUPPORT
LEFT BLADE DC/DS/DL 90X12
NUT M10X1,25 D980 8 ZB
STONE DEFLECTOR
COUTEAU DROIT DC/DS/DL 90X12
VIS M16X1,5X50 SPEC 12.9 ZD
SUPPORT COUTEAU LATERAL
ETRIER SERRAGE COUTEAU DC-DS
VIS M 12X1,25X35
RONDELLE M12 ZGP EXTRA P.
SUPPORT INFERIEUR DC
PARE-HUILE 65X85X13/17 SPEC
ROULEMENT D50 D90 B20 6210 C3
BAGUE SEEGER DI 90X3 U7437 C70
BAGUE OR D. 123.43X3.53
ECRO.M10X1,25 D980 8 ZB
COUVERCLE
BOITE DE TRANSMISSION 1300
ENTRETOISE
JOINT MM.0,5
FLASQUE INTERIEUR
ENGRENAGE
COLLIER AUTOBL. M45X1,5 T.4H
CAPOT SUPERIEUR 1300
ROULEMENT D35 D72 B17 6207
BAGUE OR 94.83X3.53 NBR
SUPPORT ROULEMENT
RONDELLE GROWER D.10
VIS M 10X1,25X35
BAGUE OR 34,52X3,53 NBR
COUVERCLE
EXTENSION
BOUCHON FERMETURE
VIS M 10X1,25X35
BOITE DE VITESSE COMPL.
BOITE DE VITESSE COMPL.
BOITE DE VIT. COMPL. DELFINO
VIS M 10X1,25X25
JOINT D=6
BAGUE SEEGER D.55
ROSETTE D=65 D=55 L=0,1
ROSETTE D=65 D=55 L=0.05
ENGRENAGE LATERAL DM
ENTRETOISE D=67 D=55 L=16.5
BAGUE SEEGER D.100
ROULEMENT 6211 AG15
SUPPORT INFERIEUR
SUPPORT COUTEAU CENTRAL DMR
COUTEAU GAUCHE DC/DS/DL 90X12
ECRO.M10X1,25 D980 8 ZB
COIN DE RENFORCEMENT
RECHT MESSER DC/DS/DL 90X12
SEITENMESSERHALTERUNG
MESSERSCHRAUBESPERRUNG
UNTERLEGSCHEIBE M12 ZGP EXTRA
FLANSCH
OELABDICHTUNG 65X85X13/17SPEC.
LAGER D50 D90 B20 6210 C3
SEEGERRING DI 90X 3 U7437 C70
RING OR 123.43X3.53 NBR
MUTT.M10X1,25 D980 8 ZB
DECKEL
ANTRIEBSKASTEN 1300
ANTRIEBSKASTEN 1500
ANTRIEBSKASTEN 1800
ANTRIEBSKASTEN 2000
ANTRIEBSKASTEN 2300
ANTRIEBSKASTEN 2500
ANTRIEBSKASTEN 3000
DISTANZSTUECK
DICHTUNG MM.0,5
INNENFLANSCH
ZAHNRAD
SELBSTSP. M45X1,5 T.4H ZN
OBERBLECH 1300
OBERBLECH 1500
OBERBLECH 1800
OBERBLECH 2000
OBERBLECH 2300
OBERBLECH 2500
OBERBLECH 3000
LAGER D35 D72 B17 6207 2RSC
RING OR 94,84X3,53 NBR
LAGERHALTER
SCHEIBE GROWER D.10
RING OR 34,52X3,53 NBR
DECKEL
VERLÄNGERUNG
VERSCHLUSSPFROPFEN
WECHSELGETRIEBGE KOMPL.
DICHTUNG D=6
SEEGERRING D.55
SCHEIBE D=65 D=55 L=0,1
SCHEIBE D=65 D=55 L=0.05
ZAHNRAD
DISTANZSTUECK D=67 D=55 L=16.5
SEEGERRING D.100
LAGER 6211 AG15
UNTERER HALTER
ZENTRALMESSERHALTERUNG
LINKES MESSER DC/DS/DL 90X12
MUTT.M10X1,25 D980 8 ZB
VERSTAERKUNGSKEIL
CUCHILLO DERECH.DC/DS/DL 90X12
SOPORTE CUCHILLO LATERAL
CLAUSURATORNILLOCUCHILLA
ARANDELA M12 ZGP EXTRA P.
BRIDA SOPORTE INFERIOR DC
PARA-ACEITE 65X85X13/17 SPEC.
COJINETE D50 D90 B20 6210 C3
ANILLO SEEGER DI 90X3 U7437
ANILLO OR 123.43X3.53 NBR
TUER.M10X1,25 D980 8 ZB
TAPA
CUERPO TRASMISION 1300
DISTANCIADOR
JUNTA MM.0,5
BRIDA INTERNA
ENGRANAGE
VIROLA AUTOBL. M45X1,5 T.4H
PLANCHA SUPERIOR 1300
COJINETE D35 D72 B17 6207
ANILLO OR 94,84X3,53 NBR
SOPORTE
ARANDELA GROWER D.10
ANILLO OR 34,52X3,53 NBR
TAPA
PROLONGA
TAPON CLAUSURA
CAJA CAMBIO COMPL.
CAJA CAMBIO COMPL.
CAJA CAMBIO COMPL. DELFINO
ARAND. M10 10,5X20X2 U6592 ZN
JUNTA D=6
ANILLO D.55
ARANDELLA D=65 D=55 L=0,1
ARANDELLA D=65 D=55 L=0.05
ENGRANAJE
DISTANCIADOR D=67 D=55 L=16.5
ANILLO SEEGER D.100
COJINETE 6211 AG15
SOPORTE INFERIOR
SOPORTE CUCHILLO CENTR.
CUCHILLO IZQ. DC/DS/DL 90X12
TUER.M10X1,25 D980 8 ZB
CUÑA DE REFUERZO
cod. F07011019
TAV.020
9
TAV.030A
DELFINO 1300
1500
1800
2000
15 - 0.5 mm
35 - 0.1 mm
14 - 0.3 mm
24
25
28
27
26
29
30
32 - 0.5 mm
33 - 0.3 mm
34 - 0.15 mm
31
10
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
F03010739
F03010245
F04050083
M20400120
F01010250
F01480112
M20400122
M29100152
F02010133
M33100101
F03010080
F04050014
F04050020
M29100108
M29100109
M29100105
F01480099
F01020436
F03150630
M33100103
M33100599
M12400110
F01020445
F01020470
F01410064
M12400115
F01220011
M10100168
F01410037
F01020403
M38100146
M16100204
M16100205
M16100206
M29100107
ANELLO QOR DI 126,37X5,33 NBR
ANELLO T.A. 80X100X10 D3760NBR
CUSC.D55 D90 T23 32011
ALBERO TRASM. D=80 L=185
VITE M10X1,25X30 U5740 8.8 ZN
BASE RIDUTTORE CAB
COPPIA CONICA
CORPO RIDUTTORE DL
ANELLO T.A. 35X 47X 7 D3760NBR
CUSC.D35 D72 T18,25 30207
CUSC.D55 D100 T22,75 30211
GUAR.SUP. PIGNONE PRESSPAN 0,3
COPERCHIO PIGNONE
ROS.G 8,4X14,4X2,7 EX.C70 ZN
VITE M 8X1,25X 20 U5739 8.8 ZN
TAPPO SCARICO 1/2”GAS CON.
TAPPO SFIATO CON AST.LIV.OLIO
DISTANZIALE PROTEZIONE ERP.ZN
COMP.ATTACCO CUFFIA CENTRALE
VITE M8X1,25X30 U5739 8.8 ZN
VITE M10X1,5X20 U5739 8.8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
ATTACCO CUFFIA
DADO M 6X 1 D980 8 ZN
PROTEZIONE CARDANO
ROS.M6 6,4X12,5X1,6 U6592 ZN
VITE M6X1X16 U5739 8.8 ZN
MANICOTTO PROTEZIONE PDF 1”3/8
GUARNIZ.SUPPORTO CORONA
GUARNIZ. SUPPORTO CORONA
GASKET QOR DI 126,37X5,33 NBR
OIL SEAL 80X100X13/13
BEARING D55 D90 T23 32011
TRANSMISSION SHAFT D=80 L=185
BOLT M10X1,25X30 U5740 8.8 ZB
GROWER WASHER D.10
GEARBOX SUPPORT
BEVEL GEAR PAIR PTO 1”3/8 Z=6
GEARBOX
OIL SEAL 35X47X7 D3760NBR
BEARING D35 D72 T18,25 30207
BEARING D55 D100 T22,75 30211
GASKET MM.0,3
GASKET MM.0,5
BEARING SUPPORT COVER PINION
GROWER WASHER D.8
BOLT M8X1,25X20 U5739 8.8 ZN
OIL OUTLET PLUG 1/2”
BREATHER PLUG
SPACER
PROTECTION SUPPORT
BOLT M 8X30
BOLT M10X1,5X20 U5739 8.8 ZN
PROTECTION SUPPORT
NUT M6X1 D980 8 ZN
CARDAN PROTECTION
PLANE WASHER D.6
BOLT M6X1X16 U5739 8.8 ZN
P.T.O. PROTECTION
GASKET SUPPORT MM.0,5
GASKET MM.0,1
BAGUE QOR DI 126,37X5,33 NBR
PARE-HUILE 80X100X10/13
ROULEMENT D55 D90 T23 32011
ARBRE DE TRANSMIS.D=80 L=185
VIS M10X1,25X30 U5740 8.8 ZB
SUPPORT BOITE DE VITESSE
COUPLE CONIQUE P.T.O. 1”3/8Z=6
COLLIER AUTOBL.M40X1,5 T.4H ZN
BOITE DE VITESSE
PARE-HUILE 35X47X7 D3760NBR
ROULEMENT 30207
ROULEMENT D55 D100 T22,75
JOINT MM.0,3
JOINT MM.0,5
COUVERCLE ROULEMENT
RONDELLE GROWER D.8
VIS M8X1,25X20 U5739 8.8 ZN
BOUCHON DE VIDANGE HUILE 1/2”
BOUCHON DE SOUPIRAIL
ENTRETOISE
SUPPORT PROTECTION
VIS M 8X30
VIS M 10X20
SUPPORT PROTECTION CARDAN
ECROU M6X1 D980 8 ZN
PROTECTION CARDAN
RONDELLE D.6
VIS M6X1X16 U5739 8.8 ZN
MANCHON DE PROTECTION P.T.O.
JOINT SUPPORT MM.0,5
JOINT MM.0,1
RING QOR DI 126,37X5,33 NBR
OELABDICHTUNG 80X100X10/1
LAGER D55 D90 T23 32011
ANTRIEBSWELLE D=80 L=185
SCHR.M10X1,25X30 U5740 8.8 ZB
SCHEIBE GROWER D.10
WECHSELGETRIEBE HALTER
KEGELRITZELSATZ PTO 1”3/8 Z=6
SELBSTSP. NUTMUTTER M40X1,5
WECHSELGETRIEBEGEHAEUSE
OELABDICHTUNG 35X47X7 D3760NBR
LAGER 30207
LAGER D55 D100 T22,75 30211
DICHTUNG MM.0,3
DICHTUNG MM.0,5
LAGERDECKEL
SCHEIBE GROWER D.8
SCHRA. M8X1,25X20 U5739 8.8 ZN
OELABLASSPFROPFEN 1/2”
ENTLUEFTERSTOPFEN
DISTANZSTUECK
SCHUTZHALTER
SCHRAUBE M 8X30
SCHRAUBE M 10X20
GELENKWELLENSCHUTZ HALTER
MUTTER M6X1 D980 8 ZN
GELENKWELLENSCHUTZ
SCHEIBE D.6
SCHRAUBE M6X1X16 U5739 8.8 ZN
ZAPFWELLENSCHUTZ P.T.O.
HALTERDICHTUNG MM.0,5
DICHTUNG MM.0,1
ANILLO QOR DI 126,37X5,33 NBR
JUNTA DE AC. 80X100X10/13
COJINETE D55 D90 T23 3201
EJE DE TRASMISION D=80 L=185
TORN.M10X1,25X30 U5740 8.8 ZB
SOPORTE CAMBIO
PAR CONICO P.T.O. 1”3/8 Z=6
VIROLA AUTOBL. M40X1,5 T.4H ZN
CAJA CAMBIO
PARA-ACEITE 35X47X7 D3760NBR
COJINETE 30207
COJINETE D55 D100 T22,75 30211
JUNTA MM.0,3
JUNTA MM.0,5
TAPA COJINETE
ARANDELA GROWER D.8
TORN. M8X1,25X20 U5739 8.8 ZN
TAPON DESCARGADO ACEITE 1/2”
TAPON RESPIRADERO
DISTANCIADOR
SOPORTE PROTECCION
TORNILLO M 8X30
TORNILLO M 10X20
ARAND. M10 10,5X20X2 U6592 ZN
SOPORTE PROTECCION CARDANICO
TUERCA M6X1 D980 8 ZN
PROTECCION CARDANICO
ARANDELA D.6
TORNILLO M6X1X16 U5739 8.8 ZN
MANGUITO PROTECCION P.T.O.
JUNTA SOPORTE MM.0,5
JUNTA MM.0,1
cod. F07011019
TAV.030A
11
TAV.030B
DELFINO SUPER 2300
2500
3000
30
31
32
34
33
35
36
37
12
cod. F07011019
POS
CODICE
DESCRIZIONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
F01010289
F01480123
M27100218
M27400115
F03010245
M27400114
F04050088
M27400111
M20400124
F02010144
M10100234
M10100248
M10100249
M27400103
F03150630
M27100141
F04050068
F04050086
F03010286
M27100134
M27100135
M27100133
M27100140
M27100132
F01480112
F01010244
M12400110
F01480099
F01020436
F01020470
F01410064
M12400115
F01220011
M10100168
F01410037
F01020403
M38100146
VITE M12X1,25X35 U5740 10.9 DL
ROS.G 12,5X22,9X 4 EX.C70 ZN
SUPPORTO CAMBIO RIDUTTORE ALTO
FLANGIA DI CENTRAGGIO
ALBERO DI TRASM.
CUSC.D60 D95 T23 32012
SUPPORTO CORONA
COPPIA CONICA COMPL. Z15-Z23
GUARN. FLANGIA CORONA PR 5/10
GUARNIZIONE PRESPAN 3/10
GUARNIZIONE 1/10
CORPO RIDUTTORE
TAPPO SFIATO CON ASTINA LIV.
CUSC.D30 D62 T21,25 32206
CUSC.D55 D100 T35 33211
ANEL. T.AS 45X 60X 7 D3760NBR
GUARNIZIONE MM.0,3
GUARNIZIONE MM.0,5
GUARNIZIONE MM.0,1
GUARNIZIONE SUPP.MYLAR 0,05
FLANGIA SUPPORTO PIGNONE
VITE M10X1,25X25 U5740 8.8 ZN
ROS.G 8,4X14,4X2,7 EX.C70 ZN
VITE M 8X1,25X 20 U5739 8.8 ZN
VITE M10X1,5X20 U5739 8.8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
ATTACCO CUFFIA
PROTEZIONE CARDANO
ROS.M6 6,4X12,5X1,6 U6592 ZN
cod. F07011019
DESCRIPTION
BOLT M12X1,25X35 U5740 10.9
GEARBOX SUPPORT
CENTERING FLANGE
TRANSMISSION SHAFT
SUPPORT
BEVEL GEAR PAIR Z15-Z23
SELF LOCKING NUT M45X1,5 T.4H
GASKET MM.0,5
GASKET MM.0,3
GASKET MM.0,1
GEARBOX
BREATHER PLUG
BEARING D30 D62 T21,25 32206
BEARING D55 D100 T35 33211
OIL SEAL 45X60X7
GASKET MM.0,3
GASKET MM.0,5
GASKET MM.0,1
GASKET MM.0,05
FLANGE SUPPORT PINION
GROWER WASHER D.10
BOLT M10X1,25X25 U5740 8.8 ZN
PROTECTION SUPPORT
GROWER WASHER D.8
BOLT M8X1,25X20 U5739 8.8 ZN
BOLT M10X1,5X20 U5739 8.8 ZN
PROTECTION SUPPORT
NUT M6X1 D980 8 ZN
CARDAN PROTECTION
PLANE WASHER D.6
P.T.O. PROTECTION
DESCRIPTION
BENENNUNG
VIS M 12X1,25X35
FLASQUE
ARBRE DE TRANSMISSION
ROULEMENT 32012
SUPPORT
COUPLE CONIQUE Z15-Z23
COLLIER AUTOBL. M45X1,5 T.4H
JOINT COURONNE MM.0,5
BOITE DE VITESSE
ROULEMENT D30 D62 T21,25 32206
PARE-HUILE 45X 60X 7 D3760NBR
JOINT MM.0,3
JOINT MM.0,5
JOINT MM.0,1
JOINT MM.0,05
FLASQUE SUPPORT
VIS M 10X1,25X25
SUPPORT PROTECTION
RONDELLE GROWER D.8
VIS M8X1,25X20 U5739 8.8 ZN
VIS M 10X20
PROTECTION CARDAN
RONDELLE D.6
VIS M6X1X16 U5739 8.8 ZN
FLANSCH
ANTRIEBSWELLE
LAGER 32012
HALTERUNG
KEGELRITZELSATZ Z15-Z23
SELBSTSP. M45X1,5 T.4H ZN
FLANSCHDICHTUNG MM.0,5
WECHSELGETRIEBEGEHAEUSE
ENTLUEFTERSTOPFEN
LAGER D30 D62 T21,25 32206
LAGER D55 D100 T35 33211
OELABDICHTUNG 45X 60X 7
DICHTUNG MM.0,3
DICHTUNG MM.0,5
DICHTUNG MM.0,1
DICHTUNG MM.0,05
LAGERFLANSCH
SCHEIBE GROWER D.10
SCHUTZHALTER
SCHEIBE GROWER D.8
SCHRA. M8X1,25X20 U5739 8.8 ZN
SCHRAUBE M 10X20
GELENKWELLENSCHUTZ
SCHEIBE D.6
DESCRIPCION
TAV.030B
SOPORTE CAMBIO
BRIDA
EJE DE TRASMISION
COJINETE 32012
SOPORTE
PAR CONICO Z15-Z23
VIROLA AUTOBL. M45X1,5 T.4H
JUNTA BRIDA MM.0,5
JUNTA BRIDA MM.0,3
JUNTA BRIDA MM.0,1
CAJA CAMBIO
TAPON RESPIRADERO
COJINETE D30 D62 T21,25 3220
PARA-ACEITE 45X 60X 7 D3760NBR
JUNTA MM.0,3
JUNTA MM.0,5
JUNTA MM.0,1
JUNTA MM.0,05
BRIDA SOPORTE
SOPORTE PROTECCION
ARANDELA GROWER D.8
TORN. M8X1,25X20 U5739 8.8 ZN
TORNILLO M 10X20
ARAND. M10 10,5X20X2 U6592 ZN
ARANDELA D.6
13
TAV.040
31
41
42
45
44
43
46
47
48
FINO A DELFINO SUPER 2500 (100 HP)
UP TO DELFINO SUPER 2500 (100 HP)
14
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
F03010739
F03010245
M20400120
F04050083
F01010250
F01480112
M20400122
M16100205
M16100206
M16100204
M29100143
F02010133
M33100117
M29100135
M29100140
M29100141
M29100138
M29100139
M33100118
F01480099
F01020440
M27100141
F03150630
F04050070
F04050084
M29100109
M29100107
M29100108
M29100105
F01020436
M29100151
F04050014
F03010080
M29100130
M29100131
M29100132
M29100128
M12400110
F01020449
F20040011
F01020470
F01410064
M12400115
F01220011
M10100168
F01410037
F01020403
M38100146
ANELLO QOR DI 126,37X5,33 NBR
ALBERO TRASM. D=80 L=185
CUSC.D55 D90 T23 32011
VITE M10X1,25X30 U5740 8.8 ZN
BASE RIDUTTORE CAB
GUARNIZ.SUPPORTO CORONA
COPPIA CONICA
CORPO CAMBIO
DISTANZ.CUSCINETTO 35X42,4X5
RUOTA DENTATA Z 16
RUOTA DENTATA Z 17
RUOTA DENTATA Z 15
RUOTA DENTATA Z 18
COPERCHIO POSTERIORE CAMBIO
ROS.G 8,4X14,4X2,7 EX.C70 ZN
VITE M 8X1,25X25 U5739 8.8 ZN
TAPPO SFIATO CON ASTINA LIV.
CUSC.D35 D72 T24,25 32207
CUSC.D55 D100 T26,75 32211
COPERCHIO PIGNONE
VITE M 8X1,25X 20 U5739 8.8 ZN
ALBERO PDF 18NICRMO5 UNI 5331
CUSC.D35 D72 T18,25 30207
ANELLO T.A. 35X 47X 7 D3760NBR
GUAR.COP.P.D.F.PRESSPAN 0,1
GUAR.COP. P.D.F. PRESSPAN 0,3
GUAR.COP. P.D.F. PRESSPAN O,5
COPERCHIO P.D.F.
VITE M 8X1,25X35 U5739 8.8 ZN
ETICH.VEL .CAMBIO DL VIGNETO
VITE M10X1,5X20 U5739 8.8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
ATTACCO CUFFIA
PROTEZIONE CARDANO
ROS.M6 6,4X12,5X1,6 U6592 ZN
GASKET QOR DI 126,37X5,33 NBR
TRANSMISSION SHAFT D=80 L=185
BOLT M10X1,25X30 U5740 8.8 ZB
GROWER WASHER D.10
GEARBOX SUPPORT
BEVEL GEAR PAIR
GEARBOX HOUSING
SPACER
GEAR Z-16
GEAR Z-17
GEAR Z-15
GEAR Z-18
GEARBOX COVER
GROWER WASHER D.8
BOLT M8X1,25X25 U5739 8.8 ZN
BREATHER PLUG
BEARING D35 D72 T24,25 32207
BEARING D55 D100 T26,75 32211
GASKET MM.0,5
GASKET MM.0,1
GASKET MM.0,3
BEARING SUPPORT COVER PINION
BOLT M8X1,25X20 U5739 8.8 ZN
POWER TAKE-OFF SHAFT 1’3/8 Z=6
BEARING D35 D72 T18,25 30207
OIL SEAL 35X47X7 D3760NBR
GASKET MM.0,1
GASKET MM.0,3
GASKET MM.0,5
BEARING COVER P.D.F.
PROTECTION SUPPORT
BOLT M8X 1.25X35 U5739 8.8 ZN
DL VIGNETO GEARBOX LABEL
BOLT M10X1,5X20 U5739 8.8 ZN
PROTECTION SUPPORT
NUT M6X1 D980 8 ZN
CARDAN PROTECTION
PLANE WASHER D.6
P.T.O. PROTECTION
BAGUE QOR DI 126,37X5,33 NBR
ARBRE DE TRANSMIS.D=80 L=185
VIS M10X1,25X30 U5740 8.8 ZB
COUPLE CONIQUE
COLLIER AUTOBL.M40X1,5 T.4H ZN
REDUCTEUR
ENTRETOISE
ENGRENAGE Z-16
ENGRENAGE Z-17
ENGRENAGE Z-15
ENGRENAGE Z-18
COUVERCLE BOITE DE VITESSE
RONDELLE GROWER D.8
VIS M8X1,25X25 U5739 8.8 ZN
ROULEMENT 32207
ROULEMENT 32211
JOINT MM.0,5
JOINT MM.0,1
JOINT MM.0,3
COUVERCLE ROULEMENT
VIS M8X1,25X20 U5739 8.8 ZN
ARBRE PRISE DE FORCE 1’3/8 Z=6
ROULEMENT 30207
PARE-HUILE 35X47X7 D3760NBR
JOINT MM.0,1
JOINT MM.0,3
JOINT MM.0,5
COUVERCLE ROULEMENT P.D.F.
SUPPORT PROTECTION
VIS M 8X35
AUFKLEBER
VIS M 10X20
PROTECTION CARDAN
RONDELLE D.6
VIS M6X1X16 U5739 8.8 ZN
RING QOR DI 126,37X5,33 NBR
ANTRIEBSWELLE D=80 L=185
LAGER D55 D90 T23 32011
SCHR.M10X1,25X30 U5740 8.8 ZB
SCHEIBE GROWER D.10
KEGELRITZELSATZ
SELBSTSP. NUTMUTTER M40X1,5
UNTERSETZUNGSGETRIEBEKASTEN
DISTANZSTUECK
ZAHNRAD WECHSELGETRIEBE Z-16
WECHSELGETRIEBEDECKEL
SCHEIBE GROWER D.8
SCHRA. M8X1,25X25 U5739 8.8 ZN
ENTLUEFTERSTOPFEN
LAGER 32207
LAGER 32211
DICHTUNG MM.0,5
DICHTUNG MM.0,1
DICHTUNG MM.0,3
LAGERDECKEL
SCHRA. M8X1,25X20 U5739 8.8 ZN
ZAPFWELLE P.D.F. 1’3/8 Z=6
LAGER 30207
OELABDICHTUNG 35X47X7 D3760NBR
DICHTUNG MM.0,1
DICHTUNG MM.0,3
DICHTUNG MM.0,5
LAGERDECKEL P.D.F.
SCHUTZHALTER
SCHRAUBE M 8X35
ETIQUETTE
SCHRAUBE M 10X20
GELENKWELLENSCHUTZ
SCHEIBE D.6
ANILLO QOR DI 126,37X5,33 NBR
EJE DE TRASMISION D=80 L=185
TORN.M10X1,25X30 U5740 8.8 ZB
SOPORTE CAMBIO
PAR CONICO
VIROLA AUTOBL. M40X1,5 T.4H ZN
CAJA REDUCTOR
DISTANCIADOR
ENGRENAJE Z-16
ENGRANAJE Z-17
ENGRANAJE Z-15
ENGRANAJE Z-18
TAPA CAMBIO
ARANDELA GROWER D.8
TORNIL.M8X1,25X25 U5739 8.8 ZN
TAPON RESPIRADERO
COJINETE 32207
COJINETE 32211
JUNTA MM.0,5
JUNTA MM.0,1
JUNTA MM.0,3
TAPA COJINETE
TORN. M8X1,25X20 U5739 8.8 ZN
ARBOL TOMA DE FUERZA 1’3/8 Z=6
COJINETE 30207
PARA-ACEITE 35X47X7 D3760NBR
JUNTA MM.0,1
JUNTA MM.0,3
JUNTA MM.0,5
TAPA COJINETE P.D.F.
SOPORTE PROTECCION
TORNILLO M 8X35
ETIQUETA
TORNILLO M 10X20
ARAND. M10 10,5X20X2 U6592 ZN
ARANDELA D.6
cod. F07011019
TAV.040
15
TAV.050A
6
7
6
5
10
8
5
9
1
4
2
3
16
cod. F07011019
POS
1
2
3
4
5
6
7
8
9
10
CODICE
F01220070
M26400419
M19400403
F01010346
F20100048
F02200529
M26400423
F01010319
M20400404
F01220059
cod. F07011019
DESCRIZIONE
DADO M16X 1,5 D980 8 ZN
ATTACCO MART. LAT REG RULLO
DISTANZ. D=25 D=16,5 L=20
VITE M16X1,5X 60 U5740 8.8 ZN
PERNO D22 L48 C40
ZN
SPINA SCATTO D.11
ZN
MARTINETTO REG.C=465 A=645
VITE M14X1,5 X45 U5740 8.8 ZN
PIASTRA DI ATTACCO MARTINETTO
DADO M14X 1,5 D980 8 ZN
DESCRIPTION
NUT M16X 1,5 D980 8 ZB
GEARTRAY REINFORCEM.
SPACER
BOLT M16X1,5X60
BOLT D22 L48 C40 ZN
SNAP PIN D.11
MECHANICAL JACK C=465 O=645
BOLT M14X 1,5X 45 U5740 8.8 ZB
SUPPORT BRACKET
NUT M14X 1,5 D980 8 ZB
DESCRIPTION
ECRO.M16X 1,5 D980 8 ZB
RENFORT LAMIER
ENTRETOISE
VIS M16X1,5X60
GOUJON D22 L48 C40
MANIVELLE MECHANIC C=465 A=645
VIS M14X1,5 X45 U5740 8.8 ZB
PLAQUETTE ATTELAGE MANIVELLE
BENENNUNG
MUTT.M16X 1,5 D980 8 ZB
VERSTERKERUNG
DISTANZSTUECK
SCHRAUBE M16X1,5X60
BOLZEN D22 L48 C40
EINRASTSTIFT D.11
MECHANISC. SPINDEL C=465 A=645
SCH. M14X1,5 X45 U5740 8.8 ZB
WINDEHALTERUNG PLATTE
DESCRIPCION
TAV.050A
TUER.M16X 1,5 D980 8 ZB
RENFUERZO TRANSM.
DISTANCIADOR
TORNILLO M16X1,5X60
PERNO D22 L48 C40
GATO MECHANICO C=465 A=645
TORNILLO M14X1,5 X45 U5740 8.8
ESTRIBO
17
TAV.050B
19
6
3
23
4
1
3
21
7
19
13
11
12
18 17 16
9
10
8
7
13
3
7
15
22
6
14
4
5
21
20
3
2
1
18
cod. F07011019
POS
CODICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
F01010348
M19400403
F20100048
M26400419
F01220070
M26400416
F02200529
F03150842
F03151040
F03100023
F01020451
F03150993
F03150992
F01220022
M58100890
F20030012
F20030081
F20030083
F03050188
F01010319
M20400404
F01220059
F03151219
cod. F07011019
DESCRIZIONE
VIT.M16X 1,5X 70 U5740 8.8 ZN
DISTANZ. D=25 D=16,5 L=20
PERNO D22 L48 C40
ZN
ATTACCO MART. LAT REG RULLO
DADO M16X 1,5 D980 8 ZN
MART.IDR.A=50 C=135 L=640/505
SPINA SCATTO D.11
ZN
ADATT.A 90° ORIENT.3/8-1/4
PROLUNGA 3/8”M-F L=35
ROS. 17 X23X1,5 RAME -3/8”
VITE M 8X1,25X45 U5739 8.8 ZN
PIATTO X COLLARE SUPERIORE ZN
COPPIA COLLARI X TUBO D.16
DADO M 8X1,25 D980 8 ZN
PREMONT.TUB.IDR.MART.LAT. GUA
ETICHETTA ABBASSAMENTO RULLI
ETICH.SCOPPIO TUBI
ETICHETTA SOLLEVAMENTO RULLI
TUBO FL.1/4 SAE100 R2AT L.1970
VITE M14X1,5 X45 U5740 8.8 ZN
PIASTRA ATTACCO MARTINETTO
DADO M14X 1,5 D980 8 ZN
RACCORDO -T- MASCHIO 1/4 ZN
TAV.050B
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
BOLT M16X 1,5X 70 U5740 8.8
SPACER
BOLT D22 L48 C40 ZN
GEARTRAY REINFORCEM.
NUT M16X 1,5 D980 8 ZB
HYDRAULIC ADJUSTER
SNAP PIN D.11
90° ADAPTOR 3/8-1/4
NIPPLE EXTENSION
WASHER 17X23X1,5
BOLT M8X 1.25X45 U5739 8.8 ZN
PLATE
DOUBLE SUPPORT
NUT M8X 1,25 D980 8 ZN
HYDRAULIC TUBE
LABEL LOWERING LABEL
WARNING LABEL
ROLLER LIFTING LABEL
TUBE FL.1/4 SAE100 R2AT L.1970
BOLT M14X 1,5X 45 U5740 8.8 ZB
0
NUT M14X 1,5 D980 8 ZB
MALE T-UNION 1/4 ZN
VIS M16X1,5X70
ENTRETOISE
GOUJON D22 L48 C40
RENFORT LAMIER
ECRO.M16X 1,5 D980 8 ZB
MANIVELLE HYDRAULIQUE
ADAPTEUR 90°
RALLONGE 3/8”
RONDELLE 17X23X1,5
VIS M 8X45
PLAT
SUPPORT DOUBLE
TUBE HYDRAUL.
ETIQUETTE
ETIQUETTE
ETIQUETTE
TUBE FL.1/4 SAE100 R2AT L.1970
VIS M14X1,5 X45 U5740 8.8 ZB
0
CONNECTION A T
SCHRAUBE M16X1,5X70
DISTANZSTUECK
BOLZEN D22 L48 C40
VERSTERKERUNG
MUTT.M16X 1,5 D980 8 ZB
HYDRAUL.SPINDELVERSTELLUNG
EINRASTSTIFT D.11
PASSTUECK 90°
VERLAENGERUNG
SCHEIBE 17X23X1,5
SCHRAUBE M 8X45
PLATTE
DOPPELHALTER
HYDRAUL. ROHR
AUFKLEBER
AUFKLEBER
AUFKLEBER
ROHR FL.1/4 SAE100 R2AT L.1970
SCH. M14X1,5 X45 U5740 8.8 ZB
0
T VERBINDUNG
TORNILLO M16X1,5X70
DISTANCIADOR
PERNO D22 L48 C40
RENFUERZO TRANSM.
TUER.M16X 1,5 D980 8 ZB
GATO HYDRAULICO
ADAPTADOR 90°
PROLONGA RACOR
ARANDELA 17X23X1,5
TORNILLO M 8X45
PLATO
SOPORTE DOBLE
TUBO HYDRAULICO
ETIQUETA
ETIQUETA
ETIQUETA
TUBO FL.1/4 SAE100 R2AT L.1970
TORNILLO M14X1,5 X45 U5740 8.8
0
JUNTURA A T
19
TAV. GB01D
16 17
18
29
20
21
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
33
21
20
19
30
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
53
54
55
35 - DELFINO 1300
36 - DELFINO 1500
37 - DELFINO 1800
38 - DELFINO 2000
39 - DELFINO 2300
40 - DELFINO 2500
41 - DELFINO 3000
Ø 450
44 51
8 - DELFINO 1300
9 - DELFINO 1500
10 - DELFINO 1800
11 - DELFINO 2000
12 - DELFINO 2300
13 - DELFINO 2500
14 - DELFINO 3000
17
16
55
54
53
30
31* 51 44
56*
33
15
34
32
Ø 370
15
18
43 42
45
46
47
48
49
50
52
STANDARD (SU ENTRAMBI I LATI)
STANDARD (ON BOTH SIDES)
20
52
59*
51
50
49
48 47
46
58*
45
57*
*SOLO PER COMBINAZIONE CON SEMINATRICE COMPAGNA
*ONLY FOR COUPLING WITH SEED DRILL COMPAGNA
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M43413473
M43415473
M43418473
M43420473
M43423473
M43425473
M43430473
M23413717
M23415717
M23418717
M23420717
M23423717
M23425717
M23430717
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413660
M43415660
M43418660
M43420660
M43423660
M43425660
M43430660
M43400649
M43400467
M43400607
F01010288
F01480123
F01220047
M43413474
M43415474
M43418474
M43420474
M43423474
M43425474
M43430474
M43400477
F02100142
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE RULLO GB 450 1000C
ROTORE RULLO GB D=450 1500A
ROTORE RULLO GB 450 2000A
ROTORE RULLO GB. D=370 1000C
ROTORE RULLO GB. D=370 1500A
ROTORE RULLO GB. D=370 2000A
ROTORE*RULLO GB.370 2500A
ROTORE*RULLO GB.370 3000A
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE POST.RULLO GB. 1000C
TRAVE POST.RULLO GB. 1500A
DISTANZIALE 2 MM
COMP.SUPP.CUSC.OSCIL.H42 X RIC
COMP.SUPP.CUSC.OSCIL.H42
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
DADO M12X1,25 D980 8 ZN
TUBO D=30 S=2,8
1000C
TUBO D=30 S=2,8
1500A
TUBO D=30 S=2,8
1500C
TUBO D=30 S=2,8
2000A
TUBO D=30 S=2,8
2000C
TUBO D=30 S=2,8
2500A
TUBO D=30 S=2,8
3000A
PIATTO DI FERMO
SPINA E.P. 8X 40 U6873 C70 BR
GUARNIZIONE METALLICA H42
ING.M 6X1 7663-A 9SMNPB28 ZN
FLANGIA SUPP. RULLO OSC. H. 42
ANELLO E. DE 40X1,75 U7435 C70
ANELLO RINF.40X50X1,5 C70
CUSC.D40 D80 BOMB.18 6208 2RS1
GUARNIZIONE ELASTICA
DADO M10X1,25 D980 8 ZN
MOZZO CUSCINETTO OSCILLANTE
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
DISTANZIALE D190 D74 L5
GUARN. METALLICA SP.1 SEMINAT.
ING.M 6X1 7663-B 9SMNPB28 ZN
>SUPPORTO CUSC.OSCILLANTE H42
CAGE ROLLER ROTOR D=450 1300
CAGE ROLLER ROTOR D=450 1500C
CAGE ROLLER ROTOR D=450 2000A
CAGE ROLLER ROTOR D=450 2000C
CAGE ROLLER ROTOR D370 2500A
CAGE ROLLER ROTOR D370 3000A
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SOIL SCRAPER FRAME GB.1300
SPACER
COMPLETE BEARING SUPPORT H42
BOLT M12X1,25X35 U5740 8.8 ZN
NUT M12X1,25 D980 8 ZN
PIPE D=30 S=2,8 1300
PIPE D=30 S=2,8 1500
PIPE D=30 S=2,8 1800
PIPE D=30 S=2,8 2000
PIPE D=30 S=2,8 2300
PIPE D=30 S=2,8 2500
PIPE D=30 S=2,8 3000
LOCKING STIRRUP
ELASTIC PIN 8X40
GASKET H42
GREASE NIPPLE M6X1 7663-A ZN
SUPPORT FLANGE H.42
SEEGER RING 40X1,75 U7435 C70
STIFFENER RING 40X50X1,5 C70
BEARING D40 D80 BOMB.18 6208
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
SPHERE NIPPLE M6x17663-B ZB
BEARING SUPPORT
BEARING HUB
ROTOR ROULEAU A CAGE 450 1300
ROTOR ROULEAU A CAGE 450 1500
ROTOR ROULEAU A CAGE 450 1500C
ROTOR ROULEAU A CAGE 450 2000A
ROTOR ROULEAU A CAGE 450 2000C
ROTOR ROULEAU D=370 1300
ROTOR D370 2500A
ROTOR D370 3000A
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
CHASSIS ATT.DECROT GB.1300
ENTRETOISE
SUPPORT ROULEMENT H.42 RIC.
VIS M12X1,25X35 U5740 8.8 ZN
TUBE D=30 S=2,8 1300
TUBE D=30 S=2,8 1500
TUBE D=30 S=2,8 1800
TUBE D=30 S=2,8 2000
TUBE D=30 S=2,8 2300
TUBE D=30 S=2,8 2500
TUBE D=30 S=2,8 3000
ETRIER DE BLOCAGE
GOUJON ELASTIQUE 8X40
JOINT H42
GRAISS. A BILLE M6X1 7663A ZN
SUPPORT H.42
BAGUE SEEGER 40X1,75 U7435 C70
BAGUE DE RENFORCEM. 40X50X1,5
ROULEMENT D40 D80 BOMB.18 6208
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
GRAISSEUR A BILLES M6X1 7663-B
SUPPORT ROULEMENT
MOYEU
STABWALZEROTOR D=450 1300
STABWALZEROTOR D=450 1500C
STABWALZEROTOR D=450 2000A
STABWALZEROTOR D=450 2000C
STABWALZEROTOR D370 2500A
STABWALZEROTOR D370 3000A
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
ABSTREIFERRAHMEN GB.1300
DISTANZSTUECK
LAGERHALTERUNG H.42 P.GETRIEBE
SCHR.M12X1,25X35 U5740 8.8 ZN
MUTTER M12X1,25 D980 8 ZN
ROHR D=30 S=2,8 1300
ROHR D=30 S=2,8 1500
ROHR D=30 S=2,8 1800
ROHR D=30 S=2,8 2000
ROHR D=30 S=2,8 2300
ROHR D=30 S=2,8 2500
ROHR D=30 S=2,8 3000
BLOCKIERUNGSBUEGEL
SPANNHUELSE 8X40
DICHTUNG H42
SCHMIERBUECHE M6X1 7663-A ZN
HALTER H.42
SEEGERRING 40X1,75 U7435 C70
SEEGER RING 40X50X1,5 C70
LAGER D40 D80 BOMB.18 6208 2RS
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
KUGELFETTBsCHSE M6X1 7663-B ZB
LAGERHALTER
NABE
ROTOR RODILLO BARRAS 450 1300
ROTOR RODILLO BARRAS 450 1500
ROTOR RODILLO BARRAS 450 1500C
ROTOR RODILLO BARRAS 450 2000A
ROTOR RODILLO BARRAS 450 2000C
ROTOR RODILLO BARRAS D370 1300
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
TELAR ATAQ.RASQ GB.1300
DISTANCIADOR
SOPORTE COJINETE H.42 RIC.
TORN.M12X1,25X35 U5740 8.8 ZN
TUBO D=30 S=2,8 1300
TUBO D=30 S=2,8 1500
TUBO D=30 S=2,8 1800
TUBO D=30 S=2,8 2000
TUBO D=30 S=2,8 2300
TUBO D=30 S=2,8 2500
TUBO D=30 S=2,8 3000
ESTRIBO BLOQUEO
ESPINA ELASTICA 8X40
JUNTA
ENGRAS. DE ESFERAS M6X1 7663-A
SOPORTE H.42
ANIL.SEEGER 40X1,75 U7435 C70
ANILLO REFUERZO 40X50X1,5
COJINETE D40 D80 BOMB.18 6208
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
ENGGRAS.M6X1 7663-B 9SMNPB28
SOPORTE COJINETE
CUBO
cod. F07011019
TAV. GB01D
21
TAV. PK01D
16 17
18
29
20
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
21
33
21
20
19
18
30
15
35
17
16
55
36
54
45
46
47
48
49
30
31* 51 44
56*
33
15
50
52
22
53
55 37
38
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
Ø 450
53
Ø 500
44 51
54
8 - DELFINO 1300
9 - DELFINO 1500
10 - DELFINO 1800
11 - DELFINO 2000
12 - DELFINO 2300
13 - DELFINO 2500
14 - DELFINO 3000
33 32
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
35
36
37
38
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M23413712
M23415712
M23418712
M23420712
M23423712
M23425712
M23430712
M23413713
M23415713
M23418713
M23420713
M23423713
M23425713
M23430713
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413667
M43415667
M43418667
M43420667
M43423667
M43425667
M43430667
M43400649
M43400467
M43400607
F01010288
F01480123
F01060208
M23400958
F01410064
F01220033
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
cod. F07011019
DESCRIZIONE
ROTORE RULLO PACKER D500 1000C
ROTORE*RULLO PK.500 1500A
ROTORE*RULLO PK.500 1500C
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE POST.RULLO PK450-500
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M10X1,5X25 U5731 8.8 ZN
PIASTRINA RASCH. PER PK TUNGST
ROS.M10 10,5X 20X 2 U6592 ZN
DADO M10X 1,5 D980 8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
DESCRIPTION
ROTOR PACKER ROLLER 500 1000C
ROTOR PACKER ROLLER 500 1500A
PACKER ROLLER ROTOR 1500C D500
PACKER ROLLER ROTOR 2000A D500
PACKER ROLLER ROTOR 2500 D500
PACKER ROLLER ROTOR 3000 D500
PACKER ROLLER ROTOR 450 1000C
PACKER ROLLER ROTOR 450 1500A
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SOIL SCRAPER FRAME PK450-500
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
BOLT M10X1,5X25
SCRETCHING PLATE FOR PK ROLLER
NUT M10X 1,5 D980 8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
DESCRIPTION
BENENNUNG
ROTOR D500 1000C HERSE
ROTOR D500 1500A HERSE
ROTOR D500 2500 HERSE
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
CHASSIS ATT.DECROTT.PK450-500
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
VIS M10X1,5X25
PLAT DU DECROT.ROUL.PK
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
PACKERWALZEROTOR 1000C D500
PACKERWALZEROTOR 1500A D500
PACKERWALZEROTOR 2500 D500
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
ABSTREIFERRAHMEN PK450-500
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHRAUBE M10X1,5X25
ABSTREIFER PLATTE PK
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
DESCRIPCION
TAV. PK01D
ROTOR RODILLO PACK 1000C D500
ROTOR RODILLO PACK 1500A D500
ROTOR RODILLO PACKER 2500 D500
ROTOR RODILLO PACKER 3000 D500
ROTOR RODILLO PACK 1300 D450
ROTOR RODIL PACK 3000A D450
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
TELAR ATAQ.RASQUETA PK450-500
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
TORNILLO M10X1,5X25
PLACA RASQUETA PK
ARAND. M10 10,5X20X2 U6592 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
23
TAV. SK01D
16 17
18
29
20
21
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
33
30
15
21
20
19
18
17
16
55
53
54
45
46
47
48
49
30
31* 51 44
56*
33
15
50
52
24
53
55
Ø 500
44 51
54
32
34
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
TAV. SK01D
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M43413445
M43415445
M43418445
M43420445
M43423445
M43425445
M43430445
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413654
M43415654
M43418654
M43420654
M43423654
M43425654
M43430654
M43400649
M43400467
M43400607
F01010288
F01480123
F01220047
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE RULLO SK.500
ROTORE RULLO SPK D=500 1500A
ROTORE RULLO SK.500
ROTORE RULLO SK.500
ROTORE RULLO SK.500
ROTORE RULLO SK.500 2500A
ROTORE RULLO SK.500
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE RASCHIARULLO 1000C
TRAVE RASCHIARULLO 1500A
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
DADO M12X1,25 D980 8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
SPIROLLER ROTOR D.500 1300
SPIROLLER ROTOR D.500 2000A
SK ROLLER ROTOR 500 2500A
SK ROLLER ROTOR 500 3000
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SOIL SCRAPER FRAME 1300
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
NUT M12X1,25 D980 8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROTOR SPIROPACKER D.500 1300
ROTOR SPIROPACKER D.500 2000A
ROTOR ROULEAU SK 2500A
ROTOR ROULEAU SK 500 3000
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
CHASSIS ATT. DECROTTOIR 1300
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
SPIROPACKERWALZE D.500 1300
SPIROPACKERWALZE D.500 2000A
SK WALZEROTOR 500 2500A
SK WALZEROTOR 500 3000
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
ABSTREIFERRAHMEN 1300
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
ROTOR SPIROPACKER D.500 2000A
ROTOR RODILLO SK 500 2500A
ROTOR RODILLO SK 500 3000
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
TELAR ATAQUE RASQUETA 1300
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
25
TAV. SP01D
16 17
18
29
20
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
21
33
21
20
19
30
15
17
16
55
53
54
53
30
31* 51 44
56*
33
55
15
Ø 500
44 51
54
32
18
34
45
46
47
48
49
50
52
26
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
39
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M23413700
M23415700
M23418700
M23420700
M23423700
M23425700
M23430700
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413647
M43415647
M43418647
M43420647
M43423647
M43425647
M43430647
M43400649
M43400467
M43400607
F01010288
F01480123
F01010291
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
COMP.ROT.RUL.SPUNT.500 1000C
COMP.ROT.RUL.SPUNT.500 1500A
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE POST.RULLO SP500 1000C
TRAVE POST.RULLO SP500 1500A
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X40 U5740 8.8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
SPIKE ROLLER ROTOR D500 1300
SPIKE ROLLER ROTOR D500 1500
SPIKE ROLLER ROTOR D500 1500C
SPIKE ROLLER ROTOR D500 2000A
SPIKE ROLLER ROTOR D500 2000C
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SOIL SCRAPER FRAME SP500 1300
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
BOLT M12X1,25X40 U5740 8.8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROTOR ROULEAU DENTS D500 1300
ROTOR ROULEAU DENTS D500 2000A
ROTOR ROULEAU DENTS D500 2000C
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
CHASSIS ATT.DECROT SP500 1300
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
VIS M12X1,25X40 U5740 8.8 ZN
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
ZINKENWALZEROTOR D500 1300
ZINKENWALZEROTOR D500 1500
ZINKENWALZEROTOR D500 1500C
ZINKENWALZEROTOR D500 2000A
ZINKENWALZEROTOR D500 2000C
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
ABSTREIFERRAHMEN SP500 1300
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHR.M12X1,25X40 U5740 8.8 ZN
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
ROTOR RODIL.DIENTES D500 1300
ROTOR RODIL.DIENTES D500 1500
ROTOR RODIL.DIENTES D500 1500C
ROTOR RODIL.DIENTES D500 2000A
ROTOR RODIL.DIENTES D500 2000C
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
TELAR ATAQ.RASQ SP500 1300
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
TORN. M12X1,25X40 U5740 8.8 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
TAV. SP01D
27
TAV. RI01D
16 17
18
29
20
21
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
33
21
20
19
30
15
17
16
55
44 51
53
54
54
53
30
31* 51 44
56*
33
55
15
33 35
Ø 500
18
45
46
47
48
49
50
52
28
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
33
35
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M43413721
M43415721
M43418721
M43420721
M43423721
M43425721
M43430721
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413647
M43415647
M43418647
M43420647
M43423647
M43425647
M43430647
M43400649
M43400467
M43400607
F01480123
F01010291
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE RULLO RISAIA 500 1000C
ROTORE RULLO RISAIA 500 1500A
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
DISTANZIALE 2 MM
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X40 U5740 8.8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
ROLLER PADDY-FIELD 500 1300
ROLLER PADDY-FIELD 500 1500
ROLLER PADDY-FIELD 500 1500C
ROLLER PADDY-FIELD 500 2000A
ROLLER PADDY-FIELD 500 2000C
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SPACER
BOLT M12X1,25X40 U5740 8.8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROULEAU POUR RIZIERE 500 1300
ROULEAU POUR RIZIERE 500 1500
ROULEAU POUR RIZIERE 500 1500C
ROULEAU POUR RIZIERE 500 2000A
ROULEAU POUR RIZIERE 500 2000C
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
ENTRETOISE
VIS M12X1,25X40 U5740 8.8 ZN
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
WALZE FUER REISFELD 500 1300
WALZE FUER REISFELD 500 1500
WALZE FUER REISFELD 500 1500C
WALZE FUER REISFELD 500 2000A
WALZE FUER REISFELD 500 2000C
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
DISTANZSTUECK
SCHR.M12X1,25X40 U5740 8.8 ZN
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
RODILLO PARA ARROZAL 500 1300
RODILLO PARA ARROZAL 500 1500
RODILLO PARA ARROZAL 500 1500C
RODILLO PARA ARROZAL 500 2000A
RODILLO PARA ARROZAL 500 2000C
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
DISTANCIADOR
TORN. M12X1,25X40 U5740 8.8 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
TAV. RI01D
29
TAV. FL01D
16 17
18
29
20
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
21
33
21
30
15
20
19
18
35
35
17
16
39
44 51
53
54
55
37
38
55
54
53
30
31* 51 44
56*
33
37
38
15
36 - DELFINO 2500
Ø 50 0
(LATO/SIDE)
45
46
47
48
49
50
52
30
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
33
52
59*
51
50
32
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
35
36
37
38
39
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M23413722
M23415722
M23418722
M23420722
M23423722
M23425722
M23430722
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413656
M43415656
M43418656
M43420656
M43423656
M43425656
M43430656
M43400649
M43400467
M43400607
F01010288
F01480123
F01060208
M43400711
F01410064
F01220033
M23400788
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE*RULLO FL.500 1000C
ROTORE*RULLO FL.500 1500A
ROTORE*RULLO FL.500 2000C
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE POST.RULLO FL500
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M10X1,5X25 U5731 8.8 ZN
PIASTRA RASCHIAT.LAT.PER FL
ROS.M10 10,5X 20X 2 U6592 ZN
DADO M10X 1,5 D980 8 ZN
PIASTRA RASCHIATERRA PER FL
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
CRUMBLER ROLLER ROTOR 1300
CRUMBLER ROLLER ROTOR 1800A
CRUMBLER ROLLER ROTOR 2000A
CRUMBLER ROLLER ROTOR 2000C
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SOIL SCRAPER FRAME FL500 1300
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
BOLT M10X1,5X25
SIDE SCRAPER PLATE FL
NUT M10X 1,5 D980 8 ZN
SCRETCHING PLATE FL
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROTOR ROULEAU A FLASQUES 1300
ROTOR ROULEAU A FLASQUES 1800A
ROTOR ROULEAU A FLASQUES 2000A
ROTOR ROULEAU A FLASQUES 2000C
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
CHASSIS ATT.DECROT FL500 1300
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
VIS M10X1,5X25
PLAT DU DECROT.ROUL.FL
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
KRUMENPACKERWALZE ROTOR 1300
KRUMENPACKERWALZE ROTOR 1800A
KRUMENPACKERWALZE ROTOR 2000A
KRUMENPACKERWALZE ROTOR 2000C
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
ABSTREIFERRAH FL 500 1300
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHRAUBE M10X1,5X25
ABSTREIFER PLATTE FL
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
ROTOR DE RULO A BRIDE 1300
ROTOR DE RULO A BRIDE 1800A
ROTOR DE RULO A BRIDE 2000A
ROTOR DE RULO A BRIDE 2000C
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
TELAR ATAQ.RASQ FL500 1300
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
TORNILLO M10X1,5X25
PLACA RASQUETA FL
ARAND. M10 10,5X20X2 U6592 ZN
PLACA RASQUETA FL
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
TAV. FL01D
31
TAV. LI01D
16 17
18
29
20
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
21
33
21
20
19
18
30
15
35
17
16
55
36
53
54
45
46
47
48
49
30
31* 51 44
56*
33
15
50
52
32
53
55 37
38
Ø 350
44 51
54
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
33 32
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
35
36
37
38
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M23413725
M23415725
M23418725
M23420725
M23423725
M23425725
M23430725
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413667
M43415667
M43418667
M43420667
M43423667
M43425667
M43430667
M43400649
M43400467
M43400607
F01010288
F01480123
F01060208
M23400788
F01410064
F01220033
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE RULLO PK500 1000C-LISCI
ROTORE RULLO PK500 1500A-LISCI
ROTORE RULLO PK500 2000A-LISC.
ROTORE RULLO PK500 2500A-LISCI
ROTORE*RULLO LI.355 3000A
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M10X1,5X25 U5731 8.8 ZN
PIASTRA RASCHIATERRA PER FL
ROS.M10 10,5X 20X 2 U6592 ZN
DADO M10X 1,5 D980 8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
SMOOTH ROLLER 1000C
SMOOTH ROLLER 1500A
SMOOTH ROLLER 1500C
SMOOTH ROLLER 2000A
SMOOTH ROLLER 2000C
SMOOTH ROLLER 2500A
SMOOTH ROLLER 3000A
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
BOLT M10X1,5X25
SCRETCHING PLATE FL
NUT M10X 1,5 D980 8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROTOR ROULEAU LIS 1000C
ROTOR ROULEAU LIS 1500A
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
VIS M10X1,5X25
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
ROTOR WALZE LIS-IO 1000C
GLATTWALZE 1500A
GLATTWALZE 1500C
GLATTWALZE 2000A
GLATTWALZE 2000C
GLATTWALZE 2500A
GLATTWALZE 3000A
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHRAUBE M10X1,5X25
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
ROTOR RODILLO LISO 1000C
ROTOR RODILLO LISO 1500A
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
TORNILLO M10X1,5X25
PLACA RASQUETA FL
ARAND. M10 10,5X20X2 U6592 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
TAV. LI01D
33
TAV.RET01D
16 17
18
29
20
21
22 - DELFINO 1300
23 - DELFINO 1500
24 - DELFINO 1800
25 - DELFINO 2000
26 - DELFINO 2300
27 - DELFINO 2500
28 - DELFINO 3000
33
30
15
21
20
19
18
17
16
55
53
54
45
46
47
48
49
30
31* 51 44
56*
33
15
50
52
34
53
55
Ø 400
44 51
54
1 - DELFINO 1300
2 - DELFINO 1500
3 - DELFINO 1800
4 - DELFINO 2000
5 - DELFINO 2300
6 - DELFINO 2500
7 - DELFINO 3000
34
32
52
59*
51
50
49
48 47
46
58*
45
57*
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
M43413756
M43415756
M43418756
M43420756
M43423756
M43425756
M43430756
F01010281
F01010082
F01410088
M43400619
M43400650
M43400657
F01220059
M43413658
M43415658
M43418658
M43420658
M43423658
M43425658
M43430658
M43400649
M43400467
M43400607
F01010288
F01480123
F01220047
M43400704
F01100011
M23400439
F02050168
M48000307
F04010184
M38100990
F01220034
M23400438
M43400707
F01010244
M43400651
M43400610
F01100012
M43400702
M43400608
ROTORE RULLO AD ANELLI
VITE M12X1,25X25 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
FIANCATA RULLO
DISTANZIALE 5 MM
DISTANZIALE 10 MM
DADO M14X 1,5 D980 8 ZN
TRAVE RASCHIARULLO 1300
DISTANZIALE 2 MM
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
DADO M12X1,25 D980 8 ZN
DADO M10X1,25 D980 8 ZN
FLANGIA SPESSORE
VITE M10X1,25X25 U5740 8.8 ZN
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
GREEN ROLLER ROTOR
BOLT M 12X1,25X25
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
ROLLER SIDE PANEL
SPACER
SPACER
NUT M14X 1,5 D980 8 ZB
SPACER
BOLT M12X1,25X35 U5740 8.8 ZN
NUT M12X1,25 D980 8 ZN
GASKET H42
SUPPORT FLANGE H.42
GASKET
NUT M10X1,25 D980 8 ZB
BEARING HUB
INNER FLANGE
BOLT M10X1,25X25 U5740 8.8 ZN
SPACER
METALIC GASKET SP.1
BEARING SUPPORT
BEARING HUB
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
ROTOR ROULEAU GREEN
VIS M 12X1,25X25
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
COTE ROULEAU
ENTRETOISE
ENTRETOISE
ENTRETOISE
VIS M12X1,25X35 U5740 8.8 ZN
JOINT H42
SUPPORT H.42
JOINT
ECRO.M10X1,25 D980 8 ZB
MOYEU
FLASQUE INTERIEUR
VIS M 10X1,25X25
ENTRETOISE
JOINT SP.1
SUPPORT ROULEMENT
MOYEU
GREENWALZE ROTOR
GREENWALZE ROTOR
GREENWALZE ROTOR
GREENWALZE ROTOR
GREENWALZE ROTOR
GREENWALZE ROTOR
GREENWALZE ROTOR
SCH.M14 15X 28X2,5 U6592 ZB
WALZENSEITENWAND
DISTANZSTUECK
DISTANZSTUECK
DISTANZSTUECK
SCHR.M12X1,25X35 U5740 8.8 ZN
DICHTUNG H42
HALTER H.42
DICHTUNG
MUTT.M10X1,25 D980 8 ZB
NABE
INNENFLANSCH
DISTANZSTUECK
DICHTUNG SP.1
LAGERHALTER
NABE
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ROTOR RODILLO GREEN
ARA.M14 15X 28X2,5 U6592 ZB
FLANCO RODILLO
DISTANCIADOR
DISTANCIADOR
DISTANCIADOR
TORN.M12X1,25X35 U5740 8.8 ZN
JUNTA
SOPORTE H.42
JUNTA
TUER.M10X1,25 D980 8 ZB
CUBO
BRIDA INTERNA
DISTANCIADOR
JUNTA SP.1
SOPORTE COJINETE
CUBO
cod. F07011019
TAV.RET01D
35
17
TAV.OPT01
18 - 98X165
19 - 138X165
1
10
9
11
8
12
20
13
7
11
2
21
3
22
14
23
15
4
6
6
5
24
1
9
29
8
40
43
36
44
40
20
28
30 -DELFINO 1500
31 -DELFINO 1800
32 -DELFINO 2000
33 -DELFINO 2300
34 -DELFINO 2500
35 -DELFINO 3000
27
36
25
22
36
2
7
3
6
4
41 - SX / LH
42 - DX / RH
39
38
37
25
5
6
26
36
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
F01010135
M36200241
F01220070
F01030117
M12400613
F01220033
M12400602
M26100713
F02200374
M28100708
M20100714
F01480145
F01220266
M10100830
F01030117
M10100829
M28100709
F20110796
F20110815
M12400674
F01010171
F01010171
F01220093
M12400601
M12400612
M12400609
M12400607
F01200110
F01230085
M20415594
M20418594
M20420594
M20423594
M20425594
M20430594
F01220034
F20100054
F01010029
F01010313
F01010254
M20400584
M20400583
F01220059
F02200529
VITE M16X1,5 X180 5738 8.8 BR
STAFFA PER TUBO DA 80
DADO M16X 1,5 D980 8 ZN
KIT V.M12X1,75X60 U6104 8.8ZN
VOMERINO REV.257 X 65 X 10
DADO M10X 1,5 D980 8 ZN
SUPPORTO ANCORA ROMPITR.
PERNO BLOCCAGGIO RUOTA
COPIGLIA R 4X 82
ZN
ANCORA DIRITTA
PIASTRINA ATTACCO ANCORE ZINC.
ROS.G 17X29 X 5 EX.C70 ZN
DADO M16X 2 D980 8 ZN
VOMERINO REVERS.DENTE HB SX
KIT V.M12X1,75X60 U6104 8.8ZN
VOMERINO REVERS.DENTE HB DX
RINFORZO ANCORA DIRITTA ANT.
CAV.Q.M16X 2X 40 98X165 ZN
CAV.Q.M16X 2X 40 138X165 ZN
PIASTRA DI FISSAGGIO ANCORA
VITE M20X1,5X 75 U5738 8.8 ZN
VITE M20X1,5X 75 U5738 8.8 ZN
DADO M20X 1,5 D980 8 ZN
ROMPITRACCIA LATERALE
MOLLA
ANCORA PER ROMPITRACCIA
TIRANTE M16
DADO M16X 2 U5587 6.8 ZN
DADO M16X 2 D982 8 ZN
BARRA LIVELLATRICE
BARRA LIVELLATRICE
BARRA LIVELLATRICE
BARRA LIVELLATRICE
BARRA LIVELLATRICE
BARRA LIVELLATRICE
DADO M10X1,25 D980 8 ZN
PERNO D19 L54 C40
VITE M10X1,25X55 U5738 8.8 ZN
VITE M14X1,5 X30 U5740 8.8 ZN
VITE M10X1,25X35 U5740 8.8 ZN
SUPPORTO BARRA SX
SUPPORTO BARRA DX
DADO M14X 1,5 D980 8 ZN
SPINA SCATTO D.11
ZN
BOLT M 16X1,5X170
STIRRUP
NUT M16X 1,5 D980 8 ZB
KIT M12X1,75X60
REVERSIBLE POINT
NUT M10X 1,5 D980 8 ZN
TOOTH FOR TRACK ERADICATOR
WHEEL ADJUSTER PIN
SPRING SPLIT PIN 4X82
STRAIGHT SUBSOILER TOOTH
PLATE
GROWER WASHER 17X29
NUT M16X 2 D980 8 ZN
REVERSIBLE POINT
KIT M12X1,75X60
REVERSIBLE POINT
TINE
U BOLT Q.M16X 2X 40 98X165
U BOLT Q.M16X 2X 40 138X165
SUPPORT
BOLT M20X1,5X75
BOLT M20X1,5X75
SELF LOCKING NUT M20X1,5 D980
TOOTH FOR TRACK ERADICATOR
SPRING
TOOTH
STRETCHER
NUT M16
NUT M16X 2 D982 8 ZN
REAR BAR
REAR BAR
REAR BAR
REAR BAR
REAR BAR
REAR BAR
NUT M10X1,25 D980 8 ZB
PIN D19 L54 C40
BOLT M 10X1,25X55
BOLT M 14X1,5X30
BOLT M 10X1,25X35
LH REAR BAR SUPPORT
RH REAR BAR SUPPORT
NUT M14X 1,5 D980 8 ZB
SNAP PIN D.11
VIS M 16X1,5X170
ETRIER
ECRO.M16X 1,5 D980 8 ZB
VIS M12X1,75X60
BECHE EFFACE-TRACE DROIT
POINTE POUR DENTS EFFACEUSE
GOUJON
GOUPILLE 4X82
DENT EXTIRPATEUR
PLAQUETTE
RONDELLE GROWER 17X29
ECROU M16X 2 D980 8 ZN
BECHE EFFACE-TRACE GAUCHE
VIS M12X1,75X60
BECHE EFFACE-TRACE DROIT
RENFORCEMENT
ATTEL.M16X2X40 98X165 ZB
ATTEL.M16X2X40 138X165 ZB
SUPPORT
VIS M20X1,5X75
VIS M20X1,5X75
POINTE POUR DENTS EFFACEUSE
RESSORT
DENT
TENDEUR
ECROU M16
ECROU M16X 2 D982 8 ZN
BARRE ARRIERE
BARRE ARRIERE
BARRE ARRIERE
BARRE ARRIERE
BARRE ARRIERE
BARRE ARRIERE
ECRO.M10X1,25 D980 8 ZB
GOUJON D19
VIS
VIS M 14X1,5X30
VIS M 10X1,25X35
SUPPORT BARRE ARRIERE GAU.
SUPPORT BARRE ARRIERE DR.
BUEGEL
MUTT.M16X 1,5 D980 8 ZB
SPITZESCHUETZE
UNTERGRUNDLOCKERER
BOLZEN
SPLINT 4X82
GERADER ZINKE
PLATTE
SCHEIBE GROWER 17X29
MUTTER M16X 2 D980 8 ZN
SPITZESCHUETZE
SPITZESCHUETZE
VERSTAERKUNG
VERBI.M16X2X40 98X165 ZB
VERBI.M16X2X40 138X165 ZB
HALTER
SCHRAUBE M20X1,5X75
SCHRAUBE M20X1,5X75
UNTERGRUNDLOCKERER
FEDER
ZINKE
VERSTAERKUNGSROHR
MUTTER M16
MUTTER M16X 2 D982 8 ZN
HINTERE KRÜMELSCHIENE
MUTT.M10X1,25 D980 8 ZB
BOLZEN D19
SCHRAUBE
LI. HINTERE KRÜMELSCHIENE HALTER
RE.HINTERE KRÜMELSCHIENE HALTER
EINRASTSTIFT D.11
ESTRIBO
TUER.M16X 1,5 D980 8 ZB
REJA PARA C ISQU.
PUNTA PARA BORROHUELLA
PERNO
PASADOR 4X82
DIENTE DERECHO
PLAQUITA
ARANDELA GROWER 17X29
TUERCA M16X 2 D980 8 ZN
REJA PARA C DERECHA
REJA PARA C ISQU.
REFUERZO
PERNO M16X2X40 98X165 ZB
PERNO M16X2X40 138X165 ZB
SOPORTE
TORNILLO M20X1,5X75
TORNILLO M20X1,5X75
TUERCA AUTOBL. M20X1,5
PUNTA PARA BORROHUELLA
MUELLE
DIENTE
TENSOR
TUERCA M16
TUERCA M16X 2 D982 8 ZN
BARRA TRASERA
BARRA TRASERA
BARRA TRASERA
BARRA TRASERA
BARRA TRASERA
BARRA TRASERA
TUER.M10X1,25 D980 8 ZB
PERNO D19 L54 C40
TORNILLO
SOPORTE BARRA TRASERA DER.
SOPORTE BARRA TRASERA IZQ.
cod. F07011019
TAV.OPT01
37
PROT.01
14
6
7
8
9
10
11
(X 2)
12
15
13
DELFINO SUPER 3000
DELFINO SUPER 2500
DELFINO SUPER 2300
DELFINO 2000
DELFINO 1500 - 1800
DELFINO 1300
38
cod. F07011019
POS
CODICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
M23400553
M23400552
M23400550
F01220033
F20110730
M20413624
M20415624
M20418624
M20420624
M20423624
M20425624
F01010026
F01200048
F01010262
F01220034
cod. F07011019
DESCRIZIONE
PROTEZ. ANTERIORE CE
PROTEZIONI ANTERIORI CE
PROTEZIONI ANTERIORI CE
DADO M10X 1,5 D980 8 ZN
CAV.Q.M10X 1,5X 30 91X 99 ZN
PROTEZ.POSTERIORE CE 1300
VITE M10X1,25X40 U5738 8.8 ZN
DADO ALTO M10X1,25 5587 6S BR
VITE M10X1,25X50 U5740 8.8 ZN
DADO M10X1,25 D980 8 ZN
PROT.01
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
FRONT PROTECTION CE
FRONT PROTECTION CE
FRONT PROTECTION CE
NUT M10X 1,5 D980 8 ZN
STRIKER M10X 1,5X 30 91X 99 ZB
REAR PROTECTION
REAR PROTECTION
REAR PROTECTION
REAR PROTECTION
REAR PROTECTION
REAR PROTECTION
BOLT M 10X1,25X40
NUT M10X1,25
BOLT M16X 1,5X 70 U5740 8.8
NUT M10X1,25 D980 8 ZB
PROTECTION AVANT CE
PROTECTION AVANT CE
PROTECTION AVANT CE
BUTEE M10X 1,5X 30 91X 99 ZB
PROTECTION ARRIERE
PROTECTION ARRIERE
PROTECTION ARRIERE
PROTECTION ARRIERE
PROTECTION ARRIERE
PROTECTION ARRIERE
VIS M 10X1,25X40
ECROU M10X1,25
VIS M 10X1,25X50
ECRO.M10X1,25 D980 8 ZB
VORDERER SCHUTZ CE
VORDERER SCHUTZ CE
VORDERER SCHUTZ CE
ANSCHLAG M10X 1,5X 30 91X 99
HINTERER SCHUTZ
HINTERER SCHUTZ
HINTERER SCHUTZ
HINTERER SCHUTZ
HINTERER SCHUTZ
HINTERER SCHUTZ
MUTTER M10X1,25
MUTT.M10X1,25 D980 8 ZB
PROTECCION DELANTERA CE
EL. DE EMPALME M10X 1,5X 30
PROTECCION TRASERA
PROTECCION TRASERA
PROTECCION TRASERA
PROTECCION TRASERA
PROTECCION TRASERA
PROTECCION TRASERA
DADO M10X1,25
TUER.M10X1,25 D980 8 ZB
39
WALTERSCHEID
CARD.01
F08011587
L = 660
X
--
DS - DL - DLV
6
5
2
4
3
2
1
L
STANDARD
40
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
A
1
2
3
4
5
6
F08011587
F08010459
F08010686
F08010721
F08010851
F08010533
F08010592
CARD.GKN FRIZ. BULL.TRANCIO
FORCELLA COMP.PULS.-1’3/8 Z6
CROCIERA COMPLETA
FORCELLA + TUBO ESTERNO
PROTEZIONE COMPLETA
FORCELLA CON TUBO INTERNO
FORCELLA LIMIT.A BUL.GKN
UNIVERSAL P T O SHAFT FOR DS
LINKAGE FORK-1’3/8 Z6
SPIDER ASSY
FORK WITH EXTERNAL PIPE
PROTECTION ASSY
FORK WITH INTERNAL PIPE
SHEAR PIN
ARBRE A CARDAN POUR DS
FOURCHE ATTELAGE-1’3/8 Z6
CROISIERE COMPL. SERIE
FOURCHE AVEC TUBE EXTERIEUR
PROTECTION COMPL.
FOURCHE AVEC TUBE INTERIEUR
LIMITEUR
GELENKWELLE DS
GABELSTUECK-1’3/8 Z6
GELENKKREUZ KOMPL. SERIE
GABELST. + AUSSENROHR
KOMPL. SCHUTZ
GABELST. + INNENROHR
SCHERSTIFT
ARBOL CARDANICO PARA DS
HORQUILLA ATAQUE-1’3/8 Z6
CRUCETA COMPL. SERIE
HORQUILLA + TUBO EXTERNO
PROTECCION COMPL.
HORQUILLA + TUBO INTERNO
LIMITADOR
cod. F07011019
CARD.01
41
CARD.02
DELFINO 1300
1500
1800
OPTIONAL
42
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
F08011590
F08000003
F08010683
F08010814
F08010851
F08010544
F08011020
F08010824
F01200073
F01410076
F08011222
F08010347
F01020164
F08010909
F08011058
F08010972
F01010065
CARD.GKN 181064
133836 35.83.30 FORCEL.13/8 Z6
CROCIERA COMPLETA W2300
FORCELLA + TUBO PROFILATO INT.
PROTEZIONE COMPLETA
FORCELLA CON TUBO ESTERNO SALD
FRIZIONE COMPL.GKN
PROTEZIONE
DADO M12X1,25 U5587 6S ZN
ROS.M12 13X 24X2,5 U6592 ZN
660153 MOLLA DI PRESSIONE
FORCELLA FLANGIATA
VITE M12X1,75X70 U5737 8.8 ZN
DISCO D’ATTRITO
MOZZO
DISCO DI PRESSIONE
VITE M12X1,25X110 5738 8.8 ZN
UNIVERSAL P T O SHAFT L-850
LINKAGE FORK 1” 3/8 Z6
SPIDER ASSY
YOKE WITH INTERNAL PIPE
PROTECTION ASSY
YOKE WITH EXTER. WELDING PIPE
CLUTCH ASSY
FRICTION PROTECTION COVER
NUT M12X1,25 U5587 6S ZN
WASHER D12 U6592 ZN
PRESSURE SPRING
FLANGE YOKE
BOLT M12X1,75X70 U5737 8.8 ZN
FRICTION DISK
SPLINED HUB
PRESSURE DISC
BOLT M 12X1,25X110
CARDAN W2400 L=850
FOURCHE ATTELAGE 1” 3/8 Z6
CROISIERE COMPL.
PROTECTION COMPL.
EMBRAYAGE COMPL.
CALOTTE COUVRE EMBRAYAGE
ECROU M12X1,25 U5587 6S ZN
RONDELLE D12 U6592 ZN
RESSORT DE PRESSION
FOURCHE AVEC FLASQUE
VIS M12X1,75X70 U5737 8.8 ZN
DISQUE DE FROTTEMENT
MOYEU CANNELE
DISQUE DE PRESSION
VIS M 12X1,25X110
GELENKWELLE
GABELSTUECK 1” 3/8 Z6
GELENKKREUZ KOMPL.
KOMPL. SCHUTZ
KOMPL. KUPPLUNG
CALOTTE COUVRE EMBRAYAGE
MUTTER M12X1,25 U5587 6S ZN
SCHEIBE D12 U6592 ZN
DRUCKFEDER
GABELSTUECK M. FLANSCH
SCHR. M12X1,75X70 U5737 8.8 ZN
KUPPLUNGSCHEIBE
KEILNABE
DRUCKSCHEIBE
ARBOL CARDANICO
HORQUILLA ATAQUE 1” 3/8 Z6
CRUCETA COMPL.
PROTECCION COMPL.
FRICCION COMPL.
TAPA EMBRAGUE
TUERCA M12X1,25 U5587 6S ZN
ARANDELA D12 U6592 ZN
MUELLE DE PRESION
HORQUILLA BRIDA
TORN. M12X1,75X70 U5737 8.8 ZN
DISCO FROTAMIENTO
CUBO ACANALADO
DISCO DE PRESION
cod. F07011019
CARD.02
43
CARD.03
DELFINO 2000
2300
2500
3000
OPTIONAL
44
cod. F07011019
POS
CODICE
DESCRIZIONE
DESCRIPTION
DESCRIPTION
BENENNUNG
DESCRIPCION
A
1
2
3
4
5
6
F08011587
F08010459
F08010686
F08010721
F08010851
F08010533
F08010592
CARD.GKN FRIZ. BULL.TRANCIO
FORCELLA COMP.PULS.-1’3/8 Z6
CROCIERA COMPLETA
FORCELLA + TUBO ESTERNO
PROTEZIONE COMPLETA
FORCELLA CON TUBO INTERNO
FORCELLA LIMIT.A BUL.GKN
UNIVERSAL P T O SHAFT FOR DS
LINKAGE FORK-1’3/8 Z6
SPIDER ASSY
FORK WITH EXTERNAL PIPE
PROTECTION ASSY
FORK WITH INTERNAL PIPE
SHEAR PIN
ARBRE A CARDAN POUR DS
FOURCHE ATTELAGE-1’3/8 Z6
CROISIERE COMPL. SERIE
PROTECTION COMPL.
LIMITEUR
GELENKWELLE DS
GABELSTUECK-1’3/8 Z6
GELENKKREUZ KOMPL. SERIE
KOMPL. SCHUTZ
SCHERSTIFT
ARBOL CARDANICO PARA DS
HORQUILLA ATAQUE-1’3/8 Z6
CRUCETA COMPL. SERIE
PROTECCION COMPL.
LIMITADOR
cod. F07011019
CARD.03
45
RICHIEDETE SEMPRE RICAMBI ORIGINALI MARCHIATI
GARANZIA DI ASSOLUTA QUALITÀ!
USE
GENUINE PARTS ONLY, A GUARANTEE OF ABSOLUTE QUALITY!
BENUTZEN SIE NUR ORIGINALTEILE MIT DEM EINGEPRÄGTEN
DIE GARANTIE FÜR ABSOLUTE QUALITÄT
EXIGEZ LES PIECES DE RECHANGE ESTAMPILLES
GARANTIE DE QUALITE ABSOLUE
UTILICEN REPUESTOS ORIGINALES
GARANTIA Y FIABILIDAD
La garanzia MASCHIO sulle macchine ha valore solo se utilizzate Ricambi Originali
MASCHIO Warranty will only cover machines that are fitted with genuine Maschio parts
Nur der Einsatz von MASCHIO Originalteilen sichert Ihnen die Garantie für Ihre MASCHIO-Geräte
Les garanties ne s’appliquent que pour les machines équipées de pièces d’origine MASCHIO
MASCHIO garantíza sus maquinas solo en caso de que esten equipadas con recambios originales
GR MU EP2
ROTRA MP
CLASSIFICAZIONE SAE 85W/140
L’olio AGIP ROTRA MP soddisfa le seguenti specifiche:
AGIP ROTRA MP oil complies with the following specifications:
Das Öl ROTRA MP entspricht den folgenden Normen:
L’huile AGIP ROTRA MP satisfait les spécifications suivantes:
L’aceite AGIP ROTRA MP satisfa los siguientes normas:
Il grasso AGIP GR MU EP 2 soddisfa le seguenti specifiche:
AGIP GR MU EP 2 grease complies with the following specifications:
Das Feet AGIP GR MU EP 2 entspricht den folgenden Normen:
La graisse AGIP GR MU EP 2 satisfait les spécifications suivantes:
La grasa AGIP GR MU EP 2 satisfa los siguientes normas:
- DIN 51825 (KP2K)
- API GL5
- MIL-L-2105C
MASCHIO DEUTSCHLAND GmbH MASCHIO FRANCE S.a.r.l.
MASCHIO GASPARDO S.p.A.
MASCHIO GASPARDO SpA
Registered office & Production plant
Via Marcello, 73
I-35011 Campodarsego (Padova) Italy
Tel. +39 049 9289810
Fax +39 049 9289900
www.maschionet.com
[email protected]
Production plant
Via Mussons, 7 - 33075
Morsano al Tagliamento (PN) - Italy
Tel. +39 0434 695410
Fax +39 0434 695425
Email: [email protected]
000 МАСКИО-ГАСПАРДО РУССИЯ
Улица Пушкина, 117 Б
404126 Волжский - Волгоградская область
Тел. +7 8443 515152
факс. +7 8443 515153
e-mail: [email protected]
Äußere Nürnberger Straße 5
D-91177 Thalmässing
Deutschland
Tel. +49 (0) 9173 79000
Fax +49 (0) 9173 790079
1 rue Denis Papin
45240 LA FERTE SAINT AUBIN
France
Tel. +33 (0) 2.38.64.12.12
Fax +33 (0) 2.38.64.66.79
MASCHIO-GASPARDO USA, Inc.
MASCHIO-GASPARDO ROMANIA S.R.L. MASCHIO-GASPARDO POLAND
120 North Scott Park Road
Eldridge, IA 52748 - USA
Ph. +1 563 - 285 9937
Fax +1 563 - 285 9938
Strada Înfrátirii, F.N.
315100 Chisineu-Cris (Arad) - România
Tel. +40 257 307030
Fax +40 257 307040
MASCHIO-GASPARDO UCRAINA
GASPARDO-MASCHIO TURCHIA
MASCHIO-GASPARDO CINA

Spare Parts DL 2012-05.indd

Transcription

Similar documents

catalogo parti di ricambio catalogue of spare parts catalogue pieces

View/Open - Digital Repository Universitas Jember

Forni rotativi Rack ovens Fours rotafifs Horno rotafivo Rotor

Telaio (Frame) – 2T MX-END

Responsible Care

Frese fisse - Maschio Gaspardo

User Manual

Diesel Engine Compression Tester Kit

INDICE INDEX PAGINA PAGE TUBAZIONI ALTA PRESSIONE HIGH

macchina industriale industrial machine machine industrielle

Tav.12 - Beta USA