docExact2pass Cisco-300-101
download 
Report Transcription
Exact2pass Cisco-300-101
Cisco 300-101 Implementing Cisco IP Routing Web: www.exact2pass.com Version: Demo Email: [email protected] [ Total Questions: 10] IMPORTANT NOTICE Feedback We have developed quality product and state-of-art service to ensure our customers interest. If you have any suggestions, please feel free to contact us at [email protected] Support If you have any questions about our product, please provide the following items: exam code screenshot of the question login id/email please contact us at [email protected] and our technical experts will provide support within 24 hours. Copyright The product of each order has its own encryption code, so you should use it independently. Any unauthorized changes will inflict legal punishment. We reserve the right of final explanation for this statement. Exact Questions Cisco - 300-101 Exam Topic Breakdown Exam Topic Number of Questions Topic 7 : Exam Pool G 2 Topic 6 : Exam Pool F 2 Topic 8 : Exam Pool H 2 Topic 5 : Exam Pool E 2 Topic 4 : Exam Pool D 2 Topic 3 : Exam Pool C 0 Topic 2 : Exam Pool B 0 Topic 1 : Exam Pool A 0 TOTAL 10 Only exact questions will Pass You in Exam 1 of 11 Exact Questions Cisco - 300-101 Topic 7, Exam Pool G Question #:1 - (Exam Topic 7) In which network environment is AAA with RADIUS most appropriate? A. when Apple Talk Remote Access is in user B. when NetBIOS Frame Control Protocol is in use C. when users require access to only one device at a time D. when you need to separate all AAA services Answer: C Question #:2 - (Exam Topic 7) Which two OSPF router types can perform summarization in an OSPF networ?(Choose two) A. backbone router B. are border router C. summary router D. a autonomous system boundary router E. internal router Answer: B D Only exact questions will Pass You in Exam 2 of 11 Exact Questions Cisco - 300-101 Topic 6, Exam Pool F Question #:3 - (Exam Topic 6) Drag and drop the IPv6 NAT characteristic from the left to the matching IPv6 NAT category on the right. Answer: Explanation Only exact questions will Pass You in Exam 3 of 11 Exact Questions Cisco - 300-101 Question #:4 - (Exam Topic 6) Which LAN feature enables a default gateway to inform its end devices when a better path to a destination is available ? A. HSRP B. ICMP unreachable messages C. ICMP redirects D. Proxy ARP Answer: C Only exact questions will Pass You in Exam 4 of 11 Exact Questions Cisco - 300-101 Topic 8, Exam Pool H Question #:5 - (Exam Topic 8) When implementing OSPFv3, which statement describes the configuration of OSPF areas? A. In interface configuration mode, the OSPFv3 area ID combination assigns interfaces to OSPFv3 areas. B. In router configuration mode, the network wildcard area ID combination assigns networks to OSPFv3 areas. C. In interface configuration mode, the IPv6 OSPF process area ID combination assigns interfaces to OSPFv3 areas. D. In router configuration mode, the IPv6 OSPF interface area ID combination assigns interfaces to OSPFv3 areas. Answer: C Question #:6 - (Exam Topic 8) What command would you use to set EIGRP routes to be prioritized? A. distance 100 B. distance 89 C. distance eigrp 100 D. distance eigrp 89 Answer: D Only exact questions will Pass You in Exam 5 of 11 Exact Questions Cisco - 300-101 Topic 5, Exam Pool E Question #:7 - (Exam Topic 5) A diagram of bgp config between 3 routers R1-R2-R3, which showed the config on R2. Was what command is missing - they were trying to make adjacency between the routers on the loopbacks ? A. neighbor ..... update source loopback 0 B. neighbor...... ebpg-multihop [1] C. load balancing something D. no synchronize Answer: B Question #:8 - (Exam Topic 5) Which condition can cause unicast reverse path forwarding to fail? A. split horizon B. STP convergence C. PortFast security violation D. asymmetric routing Answer: D Only exact questions will Pass You in Exam 6 of 11 Exact Questions Cisco - 300-101 Topic 4, Exam Pool D Question #:9 - (Exam Topic 4) Refer to the exhibit. Why is the 140.140.0.0 network not used as the gateway of last resort even though it is configured first? R3#show run | include defaultip default-network 140.140.0.0 ip default-network 130.130.0.0 R3#show ip route | begin Gateway Gateway of last resort is 0.0.0.0 to network 130.130.0.0 116.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 116.16.37.0/30 is directly connected, Serial1/0.2 C 116.16.32.0/30 is directly connected, Serial2/0.2 C 116.16.34.0/28 is directly connected, Serial1/0.1 C 116.16.35.0/28 is directly connected, Serial2/0.1 S 116.0.0.0/8 [1/0] via 116.16.34.0 * 140.140.0.0/32 is subnetted, 3 subnets O 140.140.1.1 [110/65J via 116.16.34.4, 00:14:54, Serial1/0.1 O 140.140.3.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1 O 140.140.2.1 [110/65] via 116.16.34.4, 00:14:54, Serial1/0.1 * 130.130.0.0/16 is variably subnetted, 4 subnets, 2 masks D* 130.130.0.0/16 is a summary, 00:30:04, Null0 C 130.130.1.0/24 is directly connected, Ethernet0/0 C 130.130.2.0/24 is directly connected, Ethernet0/1 C 130.130.3.0/24 is directly connected, Ethernet1/0 D 150.150.0.0/16 [90/679936] via 116.16.35.5, 00:02:58, Serial2/0.1 A. The last default-network statement will always be preferred. B. Only exact questions will Pass You in Exam 7 of 11 Exact Questions Cisco - 300-101 B. A route to the 140.140.0.0 network does not exist in the routing table. C. Default-network selection will always prefer the statement with the lowest IP address. D. A router will load balance across multiple default-networks; repeatedly issuing the show ip route command would show the gateway of last resort changing between the two networks. Answer: B Explanation In the routing table of R3, we can only see the route 130.130.0.0/16 is learned via EIGRP (marked with D) and is being chosen as the "Gateway of last resort".The route to 140.140.0.0 is not present in the routing table so the command "ip default-network 140.140.0.0" has no effect.Remember that a route must appear in the routing table (via static route or learned via a routing protocol before it can be set as "Gateway of last resort" by the "ip default-network"command. Question #:10 - (Exam Topic 4) Which three statements are true when configuring redistribution for OSPF? (Choose three) A. The default metric is 10. B. The default metric is 20. C. The default metric type is 2. D. The default metric type is 1. E. Subnets do not redistribute by default. F. Subnets redistribute by default. Answer: B C E Only exact questions will Pass You in Exam 8 of 11 Exact Questions Cisco - 300-101 Topic 3, Exam Pool C Only exact questions will Pass You in Exam 9 of 11 Exact Questions Cisco - 300-101 Topic 2, Exam Pool B Only exact questions will Pass You in Exam 10 of 11 Exact Questions Cisco - 300-101 Topic 1, Exam Pool A Only exact questions will Pass You in Exam 11 of 11 About exact2pass.com exact2pass.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam Questions, Study Guides, Practice Tests. We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on. View list of all certification exams: All vendors We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses listed below. Sales: [email protected] Feedback: [email protected] Support: [email protected] Any problems about IT certification or our products, You can write us back and we will get back to you within 24 hours.
Similar documents
Kids Local Swimming Pools Near Me - Active Nation
Looking for kids Swimming pool near me? Activenation.org.uk, you will find kids local swimming pools near me. At here, our trainers teach you in detail about safe swimming and inspire young swimmers. Visit our website for more details!
