TECHNICAL GUIDE - Inter-Fab

Transcription

TECHNICAL GUIDE
• Diving Products • Rock Products
• Rail Products • Games
• Water Slides
• Pool Lifestyle Tables & Seats
PRODUCT INFORMATION AND SUPPORT 800.737.5386
for the latest information on Inter-Fab products CLICK 8 www.inter-fab.com/techguide
YOUR POOL ACCESSORY RESOURCE
innovation in action
inter-fab.com
TA B L E O F C O N T E N T S
(FULL INDEX IN BACK):
RESIDENTIAL DIVING PRODUCTS
Board Construction and Base Compatibility Chart .........................................................................................2
Diving Boards .........................................................................................................................................3-6
Base Categories, Colors and Board Compatibility Chart ................................................................................7
Bases ....................................................................................................................................................8-29
RESIDENTIAL WATER SLIDES
Acrylic Slide Overview..............................................................................................................................31
Acrylic Slide Products ..........................................................................................................................32-47
Polyethylene (Rotational Molded) Slides Overview.......................................................................................49
Polyethylene (Rotational Molded) Slide Products.....................................................................................50-61
Landscape Slide Products Overview ...........................................................................................................62
Landscape Slide Products .....................................................................................................................63-72
RAIL GOODS
Traditional Style Rails & Ladders Overview ............................................................................................73-74
Traditional Style Ladder & Rail Products ................................................................................................75-92
Designer Series Rails & Ladder Overview ...................................................................................................93
Designer Series Rail & Ladder Products .................................................................................................94-96
Deck Top Mounted Rails Overview........................................................................................................97-98
Deck Top Mounted Rail Products .........................................................................................................99-104
POOL GAMES & LIFESTYLE PRODUCTS
Pool Games Overview ............................................................................................................................105
Basketball & Volleyball Sets .....................................................................................................................106
Pool Lifestyle Tables & Seats .............................................................................................................107-114
ECHOES OF NATURE - QUICK REFERENCE
Boulder Springs Product List.....................................................................................................................115
Edgestone Series Product List ...................................................................................................................116
REFERENCE INFORMATION
Paver Kit Information - Diving Products ....................................................................................................117
Intended Use Instructions - Diving Products ...............................................................................................118
Board Hole Drill Patterns .........................................................................................................................119
Custom Drill Request Form.......................................................................................................................120
Competitor Board Information ..........................................................................................................121-123
Competitor Jig Information ...............................................................................................................124-125
Inter-Fab Diving Envelope Information......................................................................................................126
Inter-Fab Pool Specifications – ANSI/APSP/ICC-5 2011....................................................................127-130
Inter-Fab Slide Water Envelope Information.......................................................................................131-135
Paver Kit Information - Slide Products................................................................................................136-141
Intended Use Instructions - Slide Products .................................................................................................142
Slide Care & Maintenance ...............................................................................................................143-144
BYOS 1 Quote Request Form............................................................................................................145-146
BYOS 2 Quote Request Form............................................................................................................147-148
Garden Ride Series Product Selection Guide.............................................................................................149
Rail Maintenance....................................................................................................................................150
Installation Guide for Rail Goods ......................................................................................................151-152
Custom Handrail Form ............................................................................................................................153
Custom Stair Rail Form............................................................................................................................154
Custom Grab Rail & Ladder Form ............................................................................................................155
Vinyl Liner 1.90” Anchor Installation Guide.......................................................................................156-157
Product Warranty Information..................................................................................................................158
Full Index ................................................................................................................................................i - ii
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
1
DIVING BOARD CONSTRUCTION
(WOOD CORE BOARDS) :
DIVING PRODUCTS
THERE ARE 6 TYPES
OF WOOD CORE DIVING
BOARD CONSTRUCTION:
• Duro-Beam aquaBoard (6’, 8’, 10’)
• Duro-Spring (6’, 8’)
• Techni-Beam (6’, 8’, 10’, 12’)
• Baja (6’, 8’)
• Edge aquaBoard (6’, 8’)
• Olympian (6’, 8’, 10’)
• Commercial (10’, 12’, 14’, 16’)
INTER-FAB DIVING BOARD COLOR OPTIONS FOR WOOD CORE BOARDS:
DIVING BOARDS:
Standard Colors = Polar White w/White Top Tread OR Linear Blue w/White Top Tread
Custom Colors* = Black w/Gray Top Tread: -2; Tan w/Tan Top Tread: -7; Gray w/Gray Top Tread: -9
PLEASE BE SURE TO ADD CUSTOM COLOR CODE BEHIND PART # WHEN ORDERING.
* NOTE: The 12’ Techni-Beam and all Commercial Boards (10’, 12’, 14’, & 16’) only available in standard colors.
INTER-FAB BOARD TO BASE COMPATIBILITY CHART **
DURO-BEAM
AQUABOARD *** DURO-SPRING
TECHNI-BEAM
BAJA
OLYMPIAN
COMMERCIAL
BASE TYPE
6’
8’
10’
6’
8’
6’
8’
10’
12’
6’
8’
6’
8’
10’
10’
12’
14’
16’
La Mesa 6’
La Mesa 8’
La Mesa 10’
Los Arcos 6’
Los Arcos 8’
Duro-Spring 6’
Duro-Spring 8’
U-Stand 12”
U-Stand 18”
U-Stand 24”
Techni-Spring (Steel) 6’
Techni-Spring (Fiberglass) 6’
Baja 6’
Baja 8’
CITY-6
S
–
–
S
–
–
–
S
S
–
–
–
–
–
–
–
S
–
S
–
–
S
–
–
S
S
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
S
S
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
U1
–
–
U1
–
–
–
U1
U1
–
S
–
S
–
–
–
U1
–
U1
–
–
U1
–
–
U1
U1
–
–
S
–
S
–
–
–
–
–
U1
–
–
–
–
–
U1
U1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
U2
–
–
U2
–
–
–
U2
U2
–
U1
–
U1
–
–
–
U2
–
U2
–
–
U2
–
–
U2
U2
–
–
U1
–
U1
–
–
–
–
–
U2
–
–
–
–
–
U2
U2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U3
U3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
INTER-FAB DIVING SYSTEM COMPATIBILITY CHART ****
T7 DIVING BOARD ***
EDGE AQUABOARD ***
DIVING SYSTEM
7’
6’
8’
T7 Diving System
Edge Diving System
S
–
–
S
–
S
CHART KEY:
S = STANDARD; U1 = UPGRADE 1; U2 = UPGRADE 2; U3 = UPGRADE 3; – = NOT AVAILABLE
** The Board to Base Compatibility Chart above refers to standard wood core diving boards and standard fiberglass and steel diving bases.
*** The Duro-Beam aquaBoard™, T7 Diving Board, & Edge aquaBoard™ all come ready to pair with a tip-end waterfall (sold separately). 2 options available:
Board Fall (basic waterfall w/o lighting) & Board Fall-L (waterfall w/LED lighting).
**** The Diving System Compatibility Chart above refers to Inter-Fab diving systems only.
THE T7 & EDGE DIVING SYSTEMS INCLUDE COMPONENTS MANUFACTURED OUT OF ADVANCED COMPOSITE MATERIALS AND
ARE DESIGNED TO BE USED EXCLUSIVELY FOR THE T7 & EDGE DIVING SYSTEMS. THEY CANNOT BE INTERCHANGED.
2
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
lighted
waterfall
shown
Part # DB6
Part # DB8
Part # DB10
Duro-Beam Features:
• Dual Beam Laminated Core
• Durable Non-Fading, Skid Resistant Acrylic Surface
• Fiberglass Reinforced for Superior Strength
• Ready for Use with Tip End Board Fall Waterfalls
• 7.5–15 GPM (Actual GPM rating will vary depending
on specific pool size and pool equipment used.)
• Weight Limit = 250 lbs.
• See Available Board Colors on Pg. 2
Model #
DIVING PRODUCTS
DURO-BEAM aquaBoard™:
Board Thickness: 1.5”
Optional Waterfalls:
Board Fall (basic);
Board Fall-L (LED)
Nominal Length Pool Type
Use with Base Type
Colors
La Mesa/Los Arcos, U-Stands
La Mesa, U-Stands
White, Blue, Black, Tan, Gray
DB6
DB8
DB10
6’
8’
10’
I-V
II-V
III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
DB6
DB8
DB10
6’
8’
10’
70.25”
94.00”
117.50”
17.25”
17.25”
17.25”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
30.00”
40.00”
52.00”
19/32”
19/32”
19/32”
TECHNI-BEAM BOARD:
Part # TB6
Part # TB8
Part # TB10
Part # TB12
Techni-Beam Features:
• 14” Wide Solid Laminated Core
Model #
I-V
II-V
III-V
III-V
V
Use with Base Type
Colors
La Mesa/Los Arcos, Techni-Spring, U-Stands
Techni-Spring
La Mesa, U-Stands
U-Stands, Stands by other manufacturers
White, Blue
TB6
TB8
TB8
TB10
TB12
6’
8’
8’
10’
12’
Model #
Nominal Length
A
B
C
D
F
DIA.
TB6
TB8
TB10
TB12
6’
8’
10’
12’
70.25”
94.00”
117.50”
142.00”
17.25”
17.25”
17.25”
17.25”
12.00”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
4.00”
30.00”
40.00”
52.00”
62.00”
19/32”
19/32”
19/32”
19/32”
TG - Rev. 7/15
3
DURO-SPRING BOARD:
DIVING PRODUCTS
Part # DS6
Part # DS8
Duro-Spring Features:
• 12” Wide Laminated Wood Core
Model #
Use with Base Type
Colors
Duro-Spring
Duro-Spring
DS6
DS8
6’
8’
I-V
III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
DS6
DS8
6’
8’
70.25”
94.00”
17.25”
17.25”
4.50”
4.50”
8.00”
8.00”
30.00”
36.00”
19/32”
19/32”
OLYMPIAN BOARD:
Part # OLY6
Part # OLY8
Part # OLY10
Olympian Features:
• 16.5” Solid Laminated Core
• Smooth Resin Finish on Bottom of Board
Model #
4
6’ Board Thickness: 1.5”
Colors
La Mesa/Los Arcos, Techni-Spring, U-Stands
Techni-Spring
La Mesa, U-Stands
OLY6
OLY8
OLY8
OLY10
6’
8’
8’
10’
Model #
Nominal Length
A
B
C
D
F
DIA.
OLY6
OLY8
OLY10
6’
8’
10’
70.25”
94.00”
117.50”
17.25”
17.25”
17.25”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
30.00”
40.00”
52.00”
19/32”
19/32”
19/32”
TG - Rev. 7/15
I-V
II-V
III-V
III-V
Use with Base Type
CLICK 8
DIVING PRODUCTS
BAJA JUMP BOARD:
Part # BA6
Part # BA8
Baja Jump Board Features:
• 14” Wide Laminated Core
Model #
Use with Base Type
Colors
Baja Jump Stand
Baja Jump Stand
BA6
BA8
6’
8’
I-V
III-V
Model #
Nominal Length
A
B
C
D
E
F
DIA.
BA6
BA8
6’
8’
70.25”
94.00”
17.25”
17.25”
12.00”
12.00”
12.00”
12.00”
6.625”
6.625”
15.00”
26.00”
19/32”
19/32”
EDGE DIVING BOARD:
Board Fall (basic);
Board Fall-L (LED)
Part # EDGE6
Part # EDGE8
lighted
waterfall
shown
Edge Jump Board Features:
• Dual Beam Laminated Core
Model #
Use with Base Type
Colors
Edge Base Only
Edge Base Only
EDGE 6
EDGE 8
6’
8’
I-V
III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
EDGE 6
EDGE 8
6’
8’
70.25”
94.00”
17.25”
17.25”
6.31”
6.31”
4.00”
9.00”
42.50”
42.50”
.625”
.625”
TG - Rev. 7/15
5
T7 DIVING BOARD:
DIVING PRODUCTS
Part # T7 DB
Board Fall (basic);
Board Fall-L (LED)
T7 Board Features:
• Advanced Composite Materials
• Durable Non-Fading, Skid Resistant Surface
T7 COLORS AVAILABLE:
Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55;
Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and
Starry Night: -60
• Suitable for Use With Salt Systems
• Matching Products: Landscape Slides & Pool Lifestyle Tables
• Variety of Earth Tones & Gray Colors Available
Model #
lighted
waterfall
shown
(add custom color code behind board/base part #)
Use with Base Type
Colors
T7 Base Only
See Color Options Above
T7 DB
7’
I-V
Model #
Nominal Length
A
B
C
D
F
DIA.
T7 DB
7’
83.75”
18.75”
8.75”
7.9”
42.35”
19/32”
COMMERCIAL:
Part # COM10
Part # COM12
Part # COM14
Part # COM16
Commercial Board Features:
• Solid Laminated Core
• Smooth Resin Finish on Bottom of Board
Model #
6
Colors
U-Stands, Commercial Bases by other manufacturers
U-Stands, Commercial Bases by other manufacturers
Commercial Bases by other manufacturers
Commercial Bases by other manufacturers
White, Blue
White, Blue
White, Blue
White, Blue
COM10
COM12
COM14
COM16
10’
12’
14’
16’
Model #
Nominal Length
A
B
C
D
F
DIA.
COM10
COM12
COM14
COM16
10’
12’
14’
16’
117.50”
142.00”
166.00”
190.00”
17.50”
17.50”
20.00”
20.00”
12.00”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
4.00”
52.00”
62.00”
74.00”
86.00”
19/32”
19/32”
19/32”
19/32”
TG - Rev. 7/15
III-V
V
VII
VII-IX
Use with Base Type
CLICK 8
Active Diving Base Features:
DIVING PRODUCTS
DIVING BASES:
DEFINITION NOTE:
• Spring is derived from both the diving base or the diving base springs, and the diving board.
• For users who desire more pronounced spring action.
When referring to the
INTER-FAB RESIDENTIAL
POOL MINIMUM
SPECIFICATIONS chart
(table 2 on page 126),
please note the following:
Active Diving Bases:
• Duro-Spring - economy base for infrequent to moderate use.
• Techni-Spring - premium base for moderate to frequent use.
• Baja - premium base for moderate to frequent use.
• T7 Diving System - premium proprietary board/base set up for moderate to frequent use.
• Edge Diving System - premium proprietary board/base set up for moderate to frequent use.
Active Diving Bases
= Jump Boards
Passive Diving Base Features:
• Spring is derived from the diving board only.
• For pool owners who want a diving board but desire less pronounced spring action.
NOTE: The T7 Diving
System is suitable for use on
Type I - Type V pools.
Passive Diving Bases:
• U-Stands - economy base for infrequent to moderate use.
• City Base - premium base for moderate to frequent use.
• La Mesa - premium base for moderate to frequent use.
• Los Arcos - premium base for moderate to frequent use.
Passive Diving Bases
= Diving Boards
INTER-FAB DIVING BASE COLOR OPTIONS FOR STEEL & ACRYLIC BASES:
ACRYLIC DIVING BASES*:
STEEL DIVING BASES:
Standard Color = White
Custom Colors = Black: -2; Tan: -7; Gray: -9
Standard Color = White
Custom Colors = Black: -2; Earth: -3; Copper Vein: -4;
Hammertone Gray: -6; Light Gray: -9
PLEASE BE SURE TO ADD CUSTOM COLOR CODE BEHIND PART # WHEN ORDERING.
*NOTE: The City-6 Base is manufactured in 6’ white only.
INTER-FAB BOARD TO BASE COMPATIBILITY CHART **
DURO-BEAM
AQUABOARD *** DURO-SPRING
TECHNI-BEAM
BAJA
OLYMPIAN
COMMERCIAL
BASE TYPE
6’
8’
10’
6’
8’
6’
8’
10’
12’
6’
8’
6’
8’
10’
10’
12’
14’
16’
La Mesa 6’
La Mesa 8’
La Mesa 10’
Los Arcos 6’
Los Arcos 8’
Duro-Spring 6’
Duro-Spring 8’
U-Stand 12”
U-Stand 18”
U-Stand 24”
Baja 6’
Baja 8’
CITY-6
S
–
–
S
–
–
–
S
S
–
–
–
–
–
–
–
S
–
S
–
–
S
–
–
S
S
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
S
S
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
U1
–
–
U1
–
–
–
U1
U1
–
S
–
S
–
–
–
U1
–
U1
–
–
U1
–
–
U1
U1
–
–
S
–
S
–
–
–
–
–
U1
–
–
–
–
–
U1
U1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
S
–
U2
–
–
U2
–
–
–
U2
U2
–
U1
–
U1
–
–
–
U2
–
U2
–
–
U2
–
–
U2
U2
–
–
U1
–
U1
–
–
–
–
–
U2
–
–
–
–
–
U2
U2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U3
U3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
U3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
INTER-FAB DIVING SYSTEM COMPATIBILITY CHART ****
T7 DIVING BOARD ***
EDGE AQUABOARD ***
DIVING SYSTEM
7’
6’
8’
T7 Diving System
Edge Diving System
S
–
–
S
–
S
CHART KEY:
S = STANDARD; U1 = UPGRADE 1; U2 = UPGRADE 2; U3 = UPGRADE 3; – = NOT AVAILABLE
** The Board to Base Compatibility Chart above refers to standard wood core diving boards and standard fiberglass and steel diving bases.
*** The Duro-Beam aquaBoard™, T7 Diving Board, & Edge aquaBoard™ all come ready to pair with a tip-end waterfall (sold separately). 2 options available:
Board Fall (basic waterfall w/o lighting) & Board Fall-L (waterfall w/LED lighting).
**** The Diving System Compatibility Chart above refers to Inter-Fab diving systems only.
THE T7 & EDGE DIVING SYSTEMS INCLUDE COMPONENTS MANUFACTURED OUT OF ADVANCED COMPOSITE MATERIALS AND
ARE DESIGNED TO BE USED EXCLUSIVELY FOR THE T7 & EDGE DIVING SYSTEMS. THEY CANNOT BE INTERCHANGED.
TG - Rev. 7/15
7
LA MESA BASE:
DIVING PRODUCTS
F E AT U R E S :
• Passive Base - Spring Feature is Derived from
Board Only
• Durable & Long Lasting Acrylic & Fiberglass
Construction
• Board Fall Compatible Base
• Available in 6’, 8’, or 10’ Set-Ups
• 2 Hole Drill Pattern 12” on center
• Refer to Board Chart on Pg. 7
• Refer to Available Base Colors on Pg. 7
Part # LAM6 (La Mesa base, 6’ jig & hardware)
See page 117 for paver jig info.
Compatible with Epoxy Mounting Kit Part # EPX-5
Board Fall (basic);
Board Fall-L (LED)
IMPORTANT:
THESE DIMENSIONS ARE
ACCURATE ONLY FOR
VERTICAL POOL WALLS,
TYPICALLY GUNITE
CONSTRUCTION,
WITH LESS THAN A 3’
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
SIZES OF OTHER POOLS,
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
CUSTOMER SERVICE FOR
PROPER JIG PLACEMENT.
1-800-737-5386
8
TG - Rev. 7/15
LA MESA
PART #
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
LAM6
LAM6
LAM6
LAM6
LAM6
LAM8
LAM8
LAM8
LAM8
LAM8
LAM10
LAM10
LAM10
LAM10
LAM10
6’
6’
6’
6’
6’
8’
8’
8’
8’
8’
10’
10’
10’
10’
10’
I
II
III
IV
V
I
II
III
IV
V
I
II
III
IV
V
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
27.5”
27.5”
21.5”
15.5”
9.5”
45.5”
45.5”
45.5”
45.5”
45.5”
18”
18”
24”
30”
36”
20”
20”
26”
30”
40”
18”
24”
30”
36”
20”
26”
30”
40”
24”
30”
36”
26”
30”
40”
NOT ALLOWED
41.25”
35.25”
29.25”
23.25”
59.25”
59.25”
59.25”
59.25”
NOT ALLOWED
NOT ALLOWED
51.5”
45.5”
39.5”
75.5”
75.5”
75.5”
CLICK 8
(LAM6) :
DIVING PRODUCTS
LA MESA BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
LAM6 (shown)
LAM8
LAM10
Check your local electrical code
requirements for bonding requirements.
DESCRIPTION
DB6WW
LAM6
LM-J6
H-1/2 BLK WASH
H-1/2 RED WASH
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-SS 1/2 F WAS
H-1-1/2 WHT CAP
H-SS 5 C BOLT
H-WHT WAS/CAP
LM-FP
H-ANTI-SEIZE
6' Duro-Beam White w/White Top Tread & Hdw Kit
6' La Mesa Fiberglass Diving Base
6' La Mesa/Los Arcos Mounting Jig
1/2 x 2" Black Rubber Washer
1/2 x 2" Red Rubber Washer
1/2 Lock Washer S.S.
1/2"- 13 Hex Finish Nut S.S.
1/2 USS Flat Washer S.S.
.750 x 1-1/2 White UV Nut Cap
1/2-13 x 5 Carriage Bolt S.S.
I.F. White Washer/Cap
La Mesa/Los Arcos Rubber Fulcrum Pad
Packet of Anti Seize Lubricant (not shown)
LA MESA
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13*
* not pictured
LM-BK
ITEM #
DB-TB-M
KITS – QTY. COUNTS
1
1
1
2
2
2
2
2
2
2
2
DB-TB-M:
Board to Base Mounting Hardware
LM-BK:
Base to Jig Mounting Hardware
3
3
3
1
1
NOTES:
DB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
TG - Rev. 7/15
9
LOS ARCOS BASE:
DIVING PRODUCTS
F E AT U R E S :
Board Only
Construction
• Available in 6’ or 8’ Set-Ups
Part # LOS6 (Los Arcos base, 6’ jig & hardware)
Part # LOS8 (Los Arcos base, 8’ jig & hardware)
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
10
TG - Rev. 7/15
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
LOS ARCOS
PART #
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
LOS6
6’
I
27.5”
45.5”
18”
20”
LOS6
6’
II
27.5”
45.5”
18”
20”
LOS6
6’
III
21.5”
45.5”
24”
26”
LOS6
6’
IV
15.5”
45.5”
30”
30”
LOS6
6’
V
9.5”
45.5”
36”
40”
LOS8
8’
I
LOS8
8’
II
41.25”
59.25”
18”
20”
LOS8
8’
III
35.25”
59.25”
24”
26”
LOS8
8’
IV
29.25”
59.25”
30”
30”
LOS8
8’
V
23.25”
59.25”
36”
40”
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
NOT ALLOWED
CLICK 8
(LOS6) :
DIVING PRODUCTS
LOS ARCOS BASE
LOS6 (shown)
LOS8
DESCRIPTION
LOS6
DB6WW
LM-J6
H-1/2 BLK WASH
H-1/2 RED WASH
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-SS 1/2 F WASH
H-1-1/2 WHT CAP
H-SS 5 C BOLT
H-WHT WAS/CAP
LM-FP
H-ANTI-SEIZE
6' Los Arcos Fiberglass Diving Base
6' La Mesa/Los Arcos Mounting Jig
La Mesa/Los Arcos Rubber Fulcrum Pad
LOS ARCOS
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13*
* not pictured
LM-BK
ITEM #
DB-TB-M
1
1
1
2
2
2
2
2
2
2
2
DB-TB-M:
LM-BK:
3
3
3
1
1
NOTES:
TG - Rev. 7/15
11
DURO-SPRING BASE:
DIVING PRODUCTS
F E AT U R E S :
• Active Base - Spring Feature is
Derived from Both Base & Board
• Powder Coated Steel Base
• 3 Hole Drill Pattern
Part # DSS6 (Duro-Spring base, 6’ jig & hardware)
Part # DSS8 (Duro-Spring base, 8’ jig & hardware)
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
12
TG - Rev. 7/15
NOMINAL
DURO-SPRING
BOARD
PART #
LENGTH
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
DSS6
6’
I
27”
45”
18”
20”
DSS6
6’
II
27”
45”
18”
20”
DSS6
6’
III
21”
45”
24”
26”
DSS6
6’
IV
15”
45”
30”
30”
DSS6
6’
V
9”
45”
36”
40”
DSS8
8’
I
NOT ALLOWED
DSS8
8’
II
NOT ALLOWED
DSS8
8’
III
39.75”
63.75”
24”
26”
DSS8
8’
IV
33.75”
63.75”
30”
30”
DSS8
8’
V
27.75”
63.75”
36”
40”
CLICK 8
(DSS6) :
DIVING PRODUCTS
DURO-SPRING BASE
DSS6 (shown)
DSS8
DESCRIPTION
DS6WW
DS-J
DSS6
H-1/2 BLK WASH
H-1/2 NYLON WAS
H-1/2 RED WASH
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-SS 1/2 F WAS
H-1-1/2 WHT CAP
H-SS 3 C BOLT
H-WHT WAS/CAP
H-1x1-1/2 W CAP
H-5/8 RD WASH
H-SS 5/8 F WASH
H-SS 5/8 LOC WAS
H-SS 5/8 H NUT
H-ANTI-SEIZE
6' Duro-Spring White w/ White Top Tread & Hdw Kit
Duro-Spring Mounting Jig
6' Duro-Spring Jump Stand
1/2" Flat Washer Nylon
1/2-13 x 3" Carriage Bolt S.S.
1" I.D.x 1-1/2" Long White UV
5/8 x 1-3/4" Round Nylon Washer
5/8" USS Flat Washer S.S.
5/8 Split Lock Washer S.S.
5/8-11 Hex Finish Nut S.S.
DUROSPRING
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18*
* not pictured
DS-BK
ITEM #
DS-M
1
1
1
DS-M:
DS-BK:
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
NOTES:
DSS6 diving board shown in exploded view for illustration purposes. Must be purchased separately.
TG - Rev. 7/15
13
U-STANDARDS BASE:
DIVING PRODUCTS
Part # DBU12049
Part # DBU14049
Part # DBU18049
Part # DBU24049
F E AT U R E S :
Board Only
• Available in 6 Powder Coated Finishes
• Available in 3 Thermo Plastic Coated Finishes
• Available in 6’, 8’, 10’, or 12’ Set-Ups
(12” U style)
(14” U style; Also available in .065” #DBU14065)
U-Stand sets 4” into the deck.
IMPORTANT NOTICE: When properly installed, Inter-Fab’s 12”, 14”, and 18” U-Stands will
have 4” of the rail embedded within the deck and will measure (respectively) 12”, 14” or 18”
from the top of the rail to the surface of the deck. The 24” U-Stand is different, when properly
installed 4” of the rail will be embedded within the deck and it will measure 20” from the top
of the rail to the surface of the deck.
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL
POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN
A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER
POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT
CUSTOMER SERVICE FOR PROPER PLACEMENT. 1-800-737-5386
A
6’
8’
10’
12’
14
TG - Rev. 7/15
U-STANDARDS
PART #
(Note: there are several sizes
available for each pool type)
DBU12049
DBU12049
DBU12049 or DBU14049 or DBU18049
DBU12049
DBU18049 or DBU24049
DBU24
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
6’
6’
6’
6’
6’
8’
8’
8’
8’
8’
10’
10’
10’
10’
10’
12’
12’
12’
12’
12’
I
II
III
IV
V
I
II
III
IV
V
I
II
III
IV
V
I
II
III
IV
V
B
12”, 18”
12”, 18”
18”, 20”
20”
C
30” ±3”
40” ±4”
52” ±5”
62” ±6”
DISTANCE FROM
WATER’S EDGE
TO FORWARD
U-STAND
(S)
DISTANCE
FROM END
OF BOARD
TO FORWARD
U-STAND
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
18.25”
18.25”
12.25”
6.25”
36.25”
36.25”
36.25”
36.25”
18”
18”
24”
30”
20”
20”
26”
30”
Not recommended. Call customer service for more information.
NOT ALLOWED
32”
26”
20”
14”
50”
50”
50”
50”
18”
24”
30”
36”
20”
26”
30”
40”
24”
30”
36”
26”
30”
40”
36”
40”
NOT ALLOWED
NOT ALLOWED
37.5”
31.5”
25.5”
61.5”
61.5”
61.5”
NOT ALLOWED
NOT ALLOWED
NOT ALLOWED
NOT ALLOWED
40”
CLICK 8
76”
(DBU12049) :
DIVING PRODUCTS
U-STANDARDS BASE
DBU12049 (shown)
DBU14049
DBU14065
DBU18049
DBU18065
DBU24049
DBU24065
COMPONENT
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12*
* not pictured
DBU12049
DB6WW
FC
H-WHT WAS/CAP
H-SS 5 C BOLT
H-1/2 BLK WASH
H-1/2 RED WASH
H-SS 1/2 F WAS
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-1-1/2 WHT CAP
H-ANTI-SEIZE
12" U Style Diving Standards
Fulcrum Cover For U-Standard Base
U-STAND
ITEM #
DB-TB-M
KITS – QTY.
DB-TB-M:
2
1
1
2
2
2
2
2
2
2
2
1
NOTES:
TG - Rev. 7/15
15
BOULDER SPRINGS DIVING BASE:
DIVING PRODUCTS
F E AT U R E S :
• Durable, Rugged, & Light Weight Polyurea
Construction
• Unique Diving Base Adds Beauty and
Functionality to Pool Area
• Available in 6’, 8’, or 10’ Set-Ups
• Can Only Be Used With Inter-Fab U-Stands (included)
• Available in 4 Colors; Hues May Vary
• Color is Chemically Bonded to Undercoat
Part # BS-JR
Standard Board = Duro-Beam 6’, 8’ or 10’
Upgrade I = Techni-Beam 6’, 8’, or 10’
Upgrade 2 = Olympian 6’, 8’ or 10’
Boulder Springs Rock Colors = Light Granite: -22; Sunset Red: -23;
Dark Granite: -28; Rustic Sandstone: -29
(add custom color code behind part # when ordering)
Board Fall (basic);
Board Fall-L (LED)
Custom Diving Board Colors:
Black: -2; Tan: -7; Gray: -9
(add custom color code behind
part # when ordering)
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
16
TG - Rev. 7/15
A
6’
8’
10’
NOMINAL
U-STANDARDS BOARD
PART #
LENGTH
(A)
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
6’
6’
6’
6’
6’
8’
8’
8’
8’
8’
10’
10’
10’
10’
10’
ANSI/
POOL
TYPE
I
II
III
IV
V
I
II
III
IV
V
I
II
III
IV
V
DISTANCE FROM
POOL EDGE TO
FORWARD U-STAND
(S)
B
12”
12”
12”
C
30” ±3”
40” ±4”
52” ±5”
DISTANCE FROM
END OF BOARD TO
FORWARD U-STAND
18”
18”
12”
9”
9”
MIN.
OVERHANG
PLUS OR
MINUS 3” WA*
36.25”
36.25”
36.25”
36.25”
36.25”
MAX HEIGHT
OF BOARD
ABOVE
WATER
HOW
18”
18”
24”
30”
36”
20”
20”
26”
30”
40”
18”
24”
30”
36”
20”
26”
30”
40
24
30
36
26
30
40
NOT ALLOWED
32”
26”
20”
14”
50”
50”
50”
50”
NOT ALLOWED
NOT ALLOWED
38”
32”
26”
61.5”
61.5”
61.5”
CLICK 8
F E AT U R E S :
Construction
• Emulates the Look of Hand-Laid Stacked Stone
• Available for Use With 6’ Length Boards Only
• Can Only Be Used With Inter-Fab U-Stands (included)
Part # 7700
Standard Board = Duro-Beam 6’
Upgrade I = Techni-Beam 6’
Upgrade 2 = Olympian 6’
Custom Diving Board Colors:
Black: -2; Tan: -7; Gray: -9
(add custom color code behind
part # when ordering)
Board Fall (basic);
Board Fall-L (LED)
Edgestone Rock Colors = Graystone: -33; Brownstone: -34
A
6’
B
12”
C
30”
U-STANDARDS
PART #
NOMINAL
BOARD
LENGTH
(A)
ANSI/NSPI-5
POOL
TYPE
DBU12049
DBU12049
DBU12049
DBU12049
DBU12049
6’
6’
6’
6’
6’
I
II
III
IV
V
DISTANCE FROM
POOL EDGE TO
FORWARD U-STAND
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD U-STAND
MIN.
OVERHANG
PLUS OR
MINUS 3” WA*
MAX HEIGHT
OF BOARD
ABOVE
WATER
HOW
18”
18”
22”
36.25”
36.25”
36.25”
18”
18”
24”
20”
20”
26”
NOT ALLOWED
NOT ALLOWED
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS,
TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR.
DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION,
PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT. 1-800-737-5386
TG - Rev. 7/15
17
DIVING PRODUCTS
EDGESTONE DIVING BASE:
TECHNI-SPRING – STEEL BASE:
DIVING PRODUCTS
Part # TSB (Techni-Spring Steel Base)
Part # TSS6 (6’ Spring Assembly) OR Part # TSS8 (8’ Spring Assembly)
NOTE: MUST ORDER 3 PARTS FOR A COMPLETE
TECHNI-SPRING BASE AND BOARD COMBINATION.
F E AT U R E S :
• Powder Coated Steel Base with Leaf Spring
NOTE: MUST BE USED WITH SOLID CORE
BOARDS ONLY.
6’ Leaf Spring Length: 30”
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
18
TG - Rev. 7/15
TECHNISPRING
PART #
(STEEL)
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
TSB/TSS6
6’
I
31.5”
49.5”
18”
20”
TSB/TSS6
6’
II
31.5”
49.5”
18”
20”
TSB/TSS6
6’
III
25.5”
49.5”
24”
26”
TSB/TSS6
6’
IV
19.5”
49.5”
30”
30”
TSB/TSS6
6’
V
13.5”
49.5”
36”
40”
TSB/TSS8
8’
I
NOT ALLOWED
TSB/TSS8
8’
II
NOT ALLOWED
TSB/TSS8
8’
III
44.25”
68.25”
24”
26”
TSB/TSS8
8’
IV
38.25”
68.25”
30”
30”
TSB/TSS8
8’
V
32.25”
68.25”
36”
40”
CLICK 8
(TSB & TSS6) :
DIVING PRODUCTS
TECHNI-SPRING - STEEL BASE
DRAWING REPRESENTS THE
FOLLOWING PART NUMBERS:
TSB & TSS6 (shown)
TSB & TSS8
22
23
24
25*
* not pictured
H-1/2 BLK WASH
H-SS 1 SPACER
TS-FC
H-ANTI-SEIZE
1" Spacer S.S.
Techni-Spring Rubber Fulcrum Pad
TSS6
Techni-Spring Steel Base
6' Techni-Beam White w/White Top Tread & Hdw Kit
Techni-Spring Leaf Spring & Mounting Hardware
Techni-Spring Assembly & Mounting Hardware
I.F. White Washer Cap
Right Base Nylon Plug
Left Base Nylon Plug
5/8" USS Flat Washer S.S.
5/8 x 2" Square Nylon Washer
1/2-13 x5 Carriage Bolt S.S.
5/8-11 x 2 Hex C/S GR5 S.S.
1" I.D. x 1-1/2" Long White UV
TS-M
DESCRIPTION
TS-B
TB6WW
TS-EDGE-J
TSS6
H-WHT WAS/CAP
H-RIGHT PLUG
H-LEFT PLUG
H-SS 5/8 H NUT
H-SS 5/8 LOC WA
H-SS 5/8 F WASH
H-5/8 SQ WASH
H-5/8 RD WASH
H-SS 5 C BOLT
H-SS 5/8 HEX HD
H-1x1-1/2 W CAP
H-1-1/2 WHT CAP
H-SS 1/2 F WASH
H-SS 1/2 H NUT
H-SS 1/2 LOC WA
H-1/2 RED WASH
H-1/2 NYLON WAS
TS-BK
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
DB-TB-M
ITEM #
TECHNISPRING
STEEL
1
1
1
1
DB-TB-M:
Board to Base Mounting
Hardware
TS-BK:
Base to Jig Mounting
Hardware
2
1
1
2
2
4
2
4
TS-M:
Spring to Base Mounting
Hardware
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
2
2
1
1
NOTES:
TB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
TG - Rev. 7/15
19
TECHNI-SPRING – FIBERGLASS BASE:
DIVING PRODUCTS
F E AT U R E S :
• Active Base - Spring Feature is Derived from
Both Base & Board
Construction with Powder-Coated Leaf Spring
NOTE: MUST BE USED WITH SOLID CORE
BOARDS ONLY.
Part # TSBF (Techni-Spring Fiberglass Base)
Part # TSS6 (6’ Spring Assembly) OR Part # TSS8 (8’ Spring Assembly)
See page 117 for paver jig info. EPOXY KIT NOT AVAILABLE.
NOTE: MUST ORDER 3 PARTS FOR A COMPLETE
TECHNI-SPRING BASE AND BOARD COMBINATION.
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
20
TG - Rev. 7/15
TECHNINOMINAL
SPRING
BOARD
PART #
LENGTH
(FIBERGLASS)
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
TSBF/TSS6
6'
I
28.25”
46.25”
18”
20”
TSBF/TSS6
6'
II
28.25”
46.25”
18”
20”
TSBF/TSS6
6'
III
22.25”
46.25”
24”
26”
TSBF/TSS6
6'
IV
16.25”
46.25”
30”
30”
TSBF/TSS6
6'
V
10.25”
46.25”
36”
40”
TSBF/TSS8
8'
I
NOT ALLOWED
TSBF/TSS8
8'
II
NOT ALLOWED
TSBF/TSS8
8'
III
41”
65”
24”
26”
TSBF/TSS8
8'
IV
35”
65”
30”
30”
TSBF/TSS8
8'
V
29”
65”
36”
40”
CLICK 8
(TSBF & TSS6) :
DIVING PRODUCTS
TECHNI-SPRING - FIBERGLASS BASE
TSBF & TSS6 (shown)
TSBF & TSS8
TSS6
TS-M
DESCRIPTION
Techni-Spring Fiberglass Base
6' Techni-Beam White w/White Top Tread & Hdw Kit
Techni-Spring Fiberglass Base Mounting Jig
Techni-Spring Leaf Spring & Mounting Hardware
Right Base Nylon Plug
Left Base Nylon Plug
5/8-11x3" Hex Head Bolt S.S.
5/8" USS Flat Washer S.S. (cut)
5/8 x 2" Square Nylon Washer
1/2-13 x5 Carriage Bolt S.S.
5/8-11 x 2 Hex C/S S.S.
1" Spacer S.S.
Techni-Spring Rubber Fulcrum Pad
White UV Nut Cap
TSF-M
COMPONENT
1
TSBF
2
TB6WW
3
TSF-J
4
TSS6
5
H-WHT WAS/CAP
6
H-RIGHT PLUG
7
H-LEFT PLUG
8
H-SS 5/8-11x3
9
H-SS 5/8 H NUT
10
H-SS 5/8 LOC WA
11
H-SS 5/8 F WASH
12
H-5/8 SQ WASH
13
H-5/8 RD WASH
14
H-SS 5 C BOLT
15
H-SS 5/8 HEX HD
16
H-1-1/2 WHT CAP
17
H-SS 1/2 F WAS
18
H-SS 1/2 H NUT
19
H-SS 1/2 LOC WA
20
H-1/2 RED WASH
21
H-1/2 NYLON WAS
22
H-1/2 BLK WASH
23
H-SS 1 SPACER
24
TS-FC
25**
H-1x1-1/2 W CAP
26**
H-ANTI-SEIZE
*not required for fiberglass base installation
**not pictured
DB-TB-M
ITEM #
TECHNISPRING
FIBERGLASS
1
1
1
1
DB-TB-M:
Board to Base Mounting
Hardware
TSF-M:
Base to Jig Mounting
Hardware
2
TS-M:
Hardware
1
1
2
2
2
2
2
2
4
2
4
2
2*
2
2
2
2
2
4
4
4
4
4
4
4
2
2
1
2*
1
NOTES:
TB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
TG - Rev. 7/15
21
BAJA JUMP STAND:
DIVING PRODUCTS
F E AT U R E S :
• Active Base - Spring Feature is Derived from
Both Base & Board
• Powder Coated Steel Base
• Dual Powder Coated Coil Springs
• 4 Hole Drill Pattern
}
Must order board separately:
Part # BA-6C (Complete 6’ kit w/stand & coil spring, jig & hardware)
BA6WW or BA8WW
Part # BA-8C (Complete 8’ kit w/stand & coil spring, jig & hardware)
Compatible with Epoxy Mounting Kit Part # EPX-5 (must order 2 kits)
BOARD LENGTH
6’
8’
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
22
TG - Rev. 7/15
A
16.75”
27.25”
BAJA
PART #
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
BA-6C
6'
I
25”
43”
18”
20”
BA-6C
6'
II
25”
43”
18”
20”
BA-6C
6'
III
19”
43”
24”
26”
BA-6C
6'
IV
13”
43”
30”
30”
BA-6C
6'
V
7”
43”
36”
40”
BA-8C
8'
I
NOT ALLOWED
BA-8C
8'
II
NOT ALLOWED
BA-8C
8'
III
32”
63.75”
24”
26”
BA-8C
8'
IV
26”
63.75”
30”
30”
BA-8C
8'
V
20”
63.75”
36”
40”
CLICK 8
(BA-6C) :
DIVING PRODUCTS
BAJA JUMP STAND
BA-6C (shown)
BA-8C
Baja Base
6' Baja Jig
Baja Dual Coil Spring
1/2-13 x 3" Carriage Bolt S.S.
BA-SM
BA-S
6' Baja Jump Board White w/ White Top Tread & Hdw Kit
BA-M
DESCRIPTION
BA6WW
BA-B
BA-J6
BA-S
H-1/2 BLK WASH
H-1/2 NYLON WAS
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-SS 1/2 F WAS
H-1-1/2 WHT CAP
H-SS 3 C BOLT
H-WHT WAS/CAP
H-ANTI-SEIZE
BA-J6
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13*
* not pictured
BA-BK
ITEM #
BA-B
BA-M:
Board to Base &
Spring Mounting
Hardware
1
1
1
4
4
4
4
4
NOTES:
BA6WW diving board shown in exploded view for illustration purposes. Must be purchased separately.
4
4
4
4
4
4
4
4
1
BA-BK:
Base to Jig
Mounting Hardware
2
2
2
2
2
BA-SM:
Springs to Base
Mounting Hardware
TG - Rev. 7/15
23
T7™ DIVING SYSTEM:
DIVING PRODUCTS
F E AT U R E S :
• Unique 7’ Diving Board Can Be Installed on Type
I – Type V Pools
Construction with Advanced Composite Springs
• Advanced Composite Materials
• Variety of Earth Tones & Granite Colors Available
• Suitable for Use With Salt Systems
• Matching Products: The T7 Diving System™,
Pool/Spa Table™, Pool/Spa Seat™, and Tanning
Ledge Tables™ are designed to match the
Landscape Slide products perfectly for a complete
designer pool look.
Part # T7 DB (7’ T7 Diving Board)
Part # T7-NBASE (T7 Base & Jig)
Part # T7-NSPRING (T7 Springs)
T7 COLORS AVAILABLE:
Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55;
Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and
Starry Night: -60
NOTE: Available as Complete Kits
(add custom color code behind board/base part #)
Board Fall (basic);
Board Fall-L (LED)
T7 DIVE
STAND
ONLY T7
DIVING
BOARD CAN
BE UTILIZED
ON T7 DIVE
STAND
MIN. OVERHANG
POINT A TO
POINT W
+/- 3” **
MAX HEIGHT OF
BOARD OVER
WATER
(HOW)
50”
18”
20”
31”
50”
18”
20’
III
25”
50”
24”
26”
7’ T7 ONLY
IV
19”
50”
30”
30”
7’ T7 ONLY
V
13”
50”
36”
40”
DISTANCE FROM
DISTANCE FROM
WATER’S EDGE TO
WATER END OF
FORWARD JIG BOLT BOARD TO FORWARD
JIG BOLT
(S) *
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
7’ T7 ONLY
I
31”
7’ T7 ONLY
II
7’ T7 ONLY
MUST BE INSTALLED ON TYPE I POOL OR GREATER
IMPORTANT:
THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS,
TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR.
DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION,
PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT. 1 - 8 0 0 - 7 3 7 - 5 3 8 6
24
TG - Rev. 7/15
CLICK 8
(T7 DB, T7-NBASE, T7-NSPRING) :
DIVING PRODUCTS
T7 DIVING SYSTEM
T7 DB
T7-NSPRING
T7-NBASE
NO STEP T7 BASE
7’ T7 DIVING BOARD
3 BOLT T7 NO STEP BASE JIG
T7 NBASE SPRINGS (pair)
T7 NSPRING PAD
OPTIONAL WATERFALL ASSEMBLY
1/2” PVC FLEX SPA HOSE GRAY
1/2” FLAT NYLON WASHER
1/2” SS FLAT WASHER
1/2” SS LOCK WASHER
1/2” SS HEX NUT
.750 X 1-1/2 WHITE UV NUT CAP
3/8” SS FLAT WASHER
3/8” SS LOCK WASHER
3/8” SS FINISH HEX NUT
.553 X 1/2” GRAY PROTECTIVE CAP
3/8”–16 X 2-1/2” HEX HEAD BOLT SS
SS 8 X 3/4” PAN HEAD PHILLIPS SCREW
3/8” NYLON INSERT LOCK NUT
PACKET OF ANTI SEIZE LUBRICANT (NOT SHOWN)
T7-NBK:
T-7
DESCRIPTION
EDGE-SP
COMPONENT
1*
T7-NBASE-(color code)
2
T7-DB-(color code)
3
T7-NJIG
4
T7-NSPRING-(color)
5
SPRING PAD (factory installed)
6**
BOARD FALL
7**
H-1/2 SPA HOSE
8
H-1/2 NYLON WAS
9
H-SS 1/2 F WAS
10
H-SS 1/2 LOC WA
11
H-SS 1/2 H NUT
12
H-1-1/2 WHT CAP
13
H-SS 3/8 FLT WA
14
H-SS 3/8 LOC WA
15
H-SS 3/8 F NUT
16
H-.562 X .390 CAP
17
H-SS 3/8 X 2-1/2
18**
H-SS #8 X 3/4
19*
H-SS 3/8 NYLON
20*
H-ANTI-SEIZE
* not pictured
** optional waterfall feature
T7-102-SS
ITEM #
T7-NBK
1
1
1
1
2
1
1
T7-102-SS:
Board to Springs Mounting
Hardware
EDGE-SP:
Hardware
3
3
3
3
3
8
8
8
8
12
6
6
4
1
NOTES:
Part #T7-NBASE comes WITH jig (#3).
The T7 diving board, base, and springs must be used together and cannot be used separately in any other configuration.
6
1
TG - Rev. 7/15
25
EDGE DIVING SYSTEM:
DIVING PRODUCTS
F E AT U R E S :
Construction with Advanced Composite Springs
• Custom 4 Hole Drill Pattern
• Can be Used for Retrofit Applications with
Existing 12” on Center Techni-Spring Steel Jigs
Part # EDGE-BASE (6’ & 8’ Edge Fiberglass Base & Jig)
Part # EDGE-SPRING (6’ & 8’ Spring Assembly)
NOTE: MUST ORDER 3 PARTS FOR A COMPLETE EDGE BASE AND BOARD COMBINATION.
Board Fall (basic);
Board Fall-L (LED)
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
1-800-737-5386
26
TG - Rev. 7/15
EDGE
DIVING
SYSTEM
PART #
NOMINAL
BOARD
LENGTH
ANSI/
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
EDGE-BASE
6’
I
31.5”
49.5”
18”
20”
EDGE-BASE
6’
II
31.5”
49.5”
18”
20”
EDGE-BASE
6’
III
25.5”
49.5”
24”
26”
EDGE-BASE
6’
IV
19.5”
49.5”
30”
30”
EDGE-BASE
6’
V
13.5”
49.5”
36”
40”
EDGE-BASE
8’
I
NOT ALLOWED
EDGE-BASE
8’
II
NOT ALLOWED
EDGE-BASE
8’
III
44.25”
68.25”
24”
26”
EDGE-BASE
8’
IV
38.25”
68.25”
30”
30”
EDGE-BASE
8’
V
32.25”
68.25”
36”
40”
CLICK 8
(EDGE6WW, EDGE-BASE, EDGE-SPRING) :
DIVING PRODUCTS
EDGE DIVING SYSTEM
EDGE-BASE (shown)
EDGE-SPRING (shown)
EDGE6WW (shown)
Edge Diving Base
Edge Spring
Edge Diving Board
Edge Jig
Edge Spring Pad
IFI White Washer Cap
1/2" – 13 X 4" Carriage Bolt S.S.
1/2" Flat Washer S.S.
1/2" Lock Washer S.S.
1/2" Hex Nut S.S.
.750 x 1-1/2" White UV Nut Cap
1/2" Flat Nylon Washer
3/8" x 2 1/2" Hex Head Bolt S.S.
3/8" Flat Washer S.S.
3/8" x 3 1/2" Carriage Bolt S.S.
3/8" Finish Hex Nut S.S.
.531 x 1.00 White Protective Cap
1/2" x 2" dia. Black Rubber Washer
3/8” Nylon Insert Locknut
EDGE
DESCRIPTION
EDGE-BASE
EDGE-SPRING
EDGE-BOARD
TS-EDGE-J
Spring Pad (factory installed)
H-WHT WAS/CAP
H-SS 1/2X13X4C
H-SS 1/2 F WASH
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-1-1/2 WHT CAP
H-1/2 NYLON WAS
H-SS 3/8-16X2-1/2
H-SS 3/8 FLT WA
H-SS 3/8 LOC WA
H-SS 3/8X3-1/2C
H-SS 3/8 F NUT
H-.531 X 1.00 CAP
H-1/2 BLK WASH
H-SS 3/8 NYLON
H-ANTI-SEIZE
EDGE-M
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21*
* not pictured
EDGE-SP
ITEM #
TS-BK
1
2
1
1
2
2
2
4
2
2
2
4
4
4
4
4
6
12
6
TS-BK:
EDGE-SP:
Hardware
EDGE-M:
Board to Springs Mounting
Hardware
2
2
2
2
2
2
6
NOTE: EDGE6WW diving board shown in exploded view for illustration purposes. Must be purchased separately.
1
TG - Rev. 7/15
27
CITY BASE:
DIVING PRODUCTS
F E AT U R E S :
Board Only
Construction
• Available for Use With 6’ Length Boards Only
• Base Available in White Only
Part # CITY-6 (City Base, 6’ jig & hardware)
Part # CITY-6-NJ (City Base, hardware & NO jig)
Board Fall (basic);
Board Fall-L (LED)
IMPORTANT:
ACCURATE ONLY FOR
TYPICALLY GUNITE
CONSTRUCTION,
RADIUS TO THE POOL
FLOOR.
DUE TO THE VARYING
TYPICALLY VINYL
LINER CONSTRUCTION,
PLEASE CONTACT
LA MESA
PART #
NOMINAL
BOARD
LENGTH
ANSI/
NSPI-5
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MIN.
OVERHANG
PLUS OR
MINUS 3”
(WA)
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
CITY-6
6’
I
23.125”
41.125”
18”
20”
CITY-6
6’
II
23.125”
41.125”
18”
20”
CITY-6
6’
III
17.125”
41.125”
24”
26”
CITY-6
6’
IV
11.125”
41.125”
30”
30”
CITY-6
6’
V
5.125”
41.125”
36”
40”
NOTE: The City Base can be purchased as a retrofit or replacement
base (without jig) OR with a jig for a new installation.
The City Base is manufactured in WHITE ONLY.
1-800-737-5386
28
TG - Rev. 7/15
CLICK 8
(CITY-6) :
DIVING PRODUCTS
CITY BASE
CITY-6 (shown)
DESCRIPTION
CITY - 6 BASE
DB6WW
CITY6-JIG
H-1/2 BLK WASH
H-1/2 RED WASH
H-SS 1/2 LOC WA
H-SS 1/2 H NUT
H-SS 1/2 F WASH
H-SS 5/8 F WASH
H-1-1/2 WHT CAP
H-SS 5 C BOLT
H-WHT WAS/CAP
LM-FP
H-ANTI-SEIZE
6' City Base Fiberglass Diving Base
6' City Base Mounting Jig
1/2 X 2" Black Rubber Washer
1/2 X 2" Red Rubber Washer
1/2 Flat Washer S.S.
5/8 Flat Washer S.S.
.750 X 1-1/2 White UV Nut Cap
1/2-13 X 5 Carriage Bolt S.S.
Rubber Fulcrum Pad
CITY
COMPONENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14*
* not pictured
CB-M
ITEM #
DB---TBM
1
1
1
2
2
2
2
2
DB-TB-M:
CB-M:
3
3
3
3
2
2
2
1
1
NOTES:
TG - Rev. 7/15
29
Wild Ride™ Slide
RESIDENTIAL SLIDES
Male Model Stands at 5’11”
Zoomerang™ Slide
30
TG - Rev. 7/15
White Water™ Slide
CLICK 8
RESIDENTIAL SLIDES – ACRYLIC:
Blue
Tan
Gray
X
X
X
X
X
X
X
X
X
Zoomerang™ Slide
3’ high at seating area
(Available in RIGHT turn only.)
Part # ZM-CR-SS
comes w/ss hardware
F E AT U R E S :
• Slides Shown On This Page Are Constructed of
Durable & Long Lasting Acrylic With Fiberglass
Reinforcements
• All Inter-Fab Slides Feature the Utmost in Safety
& Performance
• Exclusive Zoom-Flume™ Water Delivery System
• Super Safe Enclosed Steps on
White Water and Wild Ride Slides
• Water Park Style U-Shaped Flumes*
• All Ship With Stainless Steel Hardware
• Stainless Steel or U.V. Resistant Plastic
Components - NO Aluminum Parts*
RESIDENTIAL SLIDES
COLORS (acrylic) White
Zoomerang
X
X
White Water
Wild Ride
X
City 2 Slide
X
* Except the City 2 Slide
Edgestone Slide Rock™
(Available in RIGHT turn only.)
Part # WWS-CL-SS
Part # WWS-CR-SS
Part # WWS-CLB-SS
Part # WWS-CRB-SS
Part # WWS-CLT-SS
Part # WWS-CRT-SS
Part # WWS-CLG-SS
Part # WWS-CRG-SS
comes w/ss hardware
Part # 7920 (tan)
Part # 7930 (gray)
comes w/ss hardware
add rock panel color:
-33 Graystone*
-34 Brownstone
*paired w/gray slide only
Wild Ride™ Slide
City 2™ Slide
6’6” high at seating area
Part # WRS-CL-SS
Part # WRS-CR-SS
Part # WRS-CLB-SS
Part # WRS-CRB-SS
Part # WRS-CLT-SS
Part # WRS-CRT-SS
Part # WRS-CLG-SS
Part # WRS-CRG-SS
comes w/ss hardware
Part # CITY2-CLW
Part # CITY2-CLB
Part # CITY2-CLT
Part # CITY2-CLG
Part # CITY2-CRW
Part # CITY2-CRB
Part # CITY2-CRT
Part # CITY2-CRG
comes w/ss hardware
*Aluminum Ladder, Legs,
and Handrails
TG - Rev. 7/15
31
WILD RIDE™ SLIDE:
Zoom-flume™
Water Supply System
91.5”
F E AT U R E S :
• Durable & Long Lasting Acrylic With
Fiberglass Reinforcements
• Available in White, Tan, Gray & Blue
• Available in Right or Left Turn
• 77.5” High at Seating Area
• Flume Width = 21.5” (centerline)
• Flume Depth = 10.5”
• Zoom-Flume™ Water Supply System
• 15-30 GPM (Actual GPM rating will vary depending
RESIDENTIAL SLIDES
• Stainless Steel Rails, Legs & Hardware
• Exclusive Stainless Steel Deck Flanges
• Optional Powder Coated or Thermo Plastic
Coated Rails & Legs
• Fully Molded Steps Provide Safe Access to
Slide Flume
• Weight Limit = 250 Lbs.
77.5”
seating
WILD RIDE™ - RIGHT
Stainless Steel
Rails & Legs
Standard Stainless
Steel Deck Flanges
Deep Flume
provides sliding
comfort for all ages
DESCRIPTION
Wild
Wild
Wild
Wild
Ride
Ride
Ride
Ride
Slide
Slide
Slide
Slide
PART NUMBER
-
right
right
right
right
-
white
blue
tan
gray
Part
Part
Part
Part
#WRS-CR-SS
#WRS-CRB-SS
#WRS-CRT-SS
#WRS-CRG-SS
comes w/ss hardware
Wild Ride™ Footprint
for RIGHT Turn Slide
32
TG - Rev. 7/15
CLICK 8
WILD RIDE™ SLIDE:
Zoom-flume™
Water Supply System
91.5”
F E AT U R E S :
RESIDENTIAL SLIDES
77.5”
seating
Coated Rails & Legs
Slide Flume
WILD RIDE™ - LEFT
Stainless Steel
Rails & Legs
Standard Stainless Steel Deck
Flanges
Deep Flume
provides sliding
DESCRIPTION
Wild
Wild
Wild
Wild
Ride
Ride
Ride
Ride
Slide
Slide
Slide
Slide
PART NUMBER
-
left
left
left
left
-
white
blue
tan
gray
Part
Part
Part
Part
#WRS-CL-SS
#WRS-CLB-SS
#WRS-CLT-SS
#WRS-CLG-SS
comes w/ss hardware
Wild Ride™ Footprint
for LEFT Turn Slide
TG - Rev. 7/15
33
WILD RIDE™ SLIDE
(WRS-CR-SS) :
RESIDENTIAL SLIDES
34
TG - Rev. 7/15
CLICK 8
WILD RIDE™ SLIDE
(WRS-CR-SS) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
SH-101: Handrails; Step to Step
SH-102: Flume to Flume; Leg to Flume
SH-103: Step to Deck
SH-104: Protective Caps
SH-106: Deck Anchors to Legs; Deck Anchor to Deck
SH-107: Deck Anchor
SH-108: Step to Flume
WRS-CL-SS
WRS-CR-SS (shown)
1
WRS-URUN-W-R
WILD RIDE UPPER RUNWAY
2
WRS-LRUN-W-R
WILD RIDE LOWER RUNWAY
3
WRS-LSTEP-W
WILD RIDE STEP LOWER SECTION
4
WRS-USTEP-W
WILD RIDE STEP UPPER SECTION
5
WRS-HD RAIL
WILD RIDE HANDRAIL
6
WW-24-1/2”-LEG
LEG, 24-1/2"
7
WW-22”-LEG
LEG, 22"
8
WW-54-1/2”-LEG
LEG, 54-1/2"
9
H-WRS/WW GASKET
GASKET, CLOSED CELL NEOPRENE SPONGE
10
DECK ANCHOR
9" STAINLESS STEEL DECK ANCHOR
11
H-.463 X .310 CAP
.463 X .310 PROTECTIVE CAP
25
12
H-.562 X .390 CAP
16
13
H-1 BALL VALVE
1" BALL VALVE-SLIP WHITE
14
H-1 SPA HOSE
10 FEET OF 1" PVC FLEX PIPE
15
H-1 WHT CAP
.750 X 1" GRAY NUT CAP
6
16
H-SS 1/2 F WAS
1/2” FLAT WASHER S.S.
8
17
H-SS 1/2-13 BOL
1/2” X 1-1/2” HEX HEAD BOLT S.S.
8
18
H-SS 1/4 FL HEAD
1/4-20 X 3/4" SOC FLAT C/S SS
19
H-SS 1/4 FLAT W
1/4" FLAT WASHER SS 18.8
17
8
20
H-SS 1/4 H NUT
1/4" HEX NUT SS
11
4
21
H-SS 1/4 X 1-1/4 F
1/4-20 X 1-1/4" SOC FLAT C/S 1
22
H-SS 1/4-20 X 1
1/4” X 1” HEX HEAD BOLT S.S.
6
23
H-SS 1/4X2-1/4H
4
24
H-SS 3/8 F NUT
3/8" HEX NUT SS
6
2
25
H-SS 3/8 FLT WASHER
3/8” X 1” FLAT WASHER S.S.
12
4
26
H-SS 3/8 WEDGE
3/8 X 2-3/4 WEDGE ANCHOR ST.ST
2
27
H-SS 3/8X1 H B
2
28
H-SS 3/8X1-3/4
6
29
L-BRACKET
L-BRACKET, LADDER ANCHOR, WHITE
* not pictured
** Comes with one (1) deck anchor and one (1) SH-106 kit. Must order one for each leg of the slide (4 total). 4 are included when ordering a complete slide.
WRS
HOSE
SH-108
SH-107
SH-106
SH-104
DESCRIPTION
SH-103
COMPONENT
SH-102
ITEM #
SH-101
HARDWARE KITS/PARTS KITS – QTY. COUNTS
1
1
1
1
2
1
1
2
1
1**
1
3
1*
1*
2
2
1
3
1
3
3
3
2
NOTES:
Wild Ride Slides available in both right and left turns.
Wild Ride slides available with optional custom powder coated or thermo plastic coated handrails and legs.
TG - Rev. 7/15
35
RESIDENTIAL SLIDES
<---
WHITE WATER™ SLIDE:
Zoom-flume™
Water Supply System
62”
F E AT U R E S :
• Flume Width = 22” (centerline)
RESIDENTIAL SLIDES
48.5”
seating
Stainless Steel
Rails & Legs
Coated Rails & Legs
• Discreetly Sits Below a 6’ Privacy Fence
Slide Flume
WHITE WATER™ - RIGHT
DESCRIPTION
Deep Flume
provides sliding
Standard Stainless
Steel Deck Flanges
White
White
White
White
Water
Water
Water
Water
PART NUMBER
Slide
Slide
Slide
Slide
-
right
right
right
right
-
white
blue
tan
gray
Part
Part
Part
Part
#WWS-CR-SS
#WWS-CRB-SS
#WWS-CRT-SS
#WWS-CRG-SS
comes w/ss hardware
White Water™ Footprint
36
TG - Rev. 7/15
CLICK 8
WHITE WATER™ SLIDE:
62”
48.5”
seating
Stainless Steel
Rails & Legs
Deep Flume
provides sliding
Standard Stainless
Steel Deck Flanges
Coated Rails & Legs
Slide Flume
RESIDENTIAL SLIDES
Zoom-flume™
Water Supply System
F E AT U R E S :
WHITE WATER™ - LEFT
DESCRIPTION
White
White
White
White
Water
Water
Water
Water
PART NUMBER
Slide
Slide
Slide
Slide
-
left
left
left
left
-
white
blue
tan
gray
Part
Part
Part
Part
#WWS-CL-SS
#WWS-CLB-SS
#WWS-CLT-SS
#WWS-CLG-SS
comes w/ss hardware
White Water™ Footprint
for LEFT Turn Slide
TG - Rev. 7/15
37
WHITE WATER™ SLIDE
(WWS-CR-SS) :
RESIDENTIAL SLIDES
38
TG - Rev. 7/15
CLICK 8
WHITE WATER™ SLIDE
(WWS-CR-SS) :
SH-102: Flume to Flume; Leg to Flume
SH-103: Step to Deck
SH-104: Protective Caps
SH-106: Deck Anchors to Legs; Deck Anchor to Deck
SH-107: Deck Anchor
SH-108: Step to Flume
WWS-CL-SS
WWS-CR-SS (shown)
HOSE
1
H-.463 X .310 CAP
25
1
2
H-.562 X .390 CAP
15
3
3
H-1 WHT CAP
.750 X 1" GRAY NUT CAP
6
4
H-SS 1/2 F WAS
6
5
H-SS 1/2-13 BOL
6
6
H-SS 1/4 H NUT
1/4” FINISH HEX NUT S.S.
4
5
1
7
H-SS 1/4 FLAT W
8
5
1
8
H-SS 1/4X2-1/4H
4
1
9
H-SS 1/4 X 1-1/4 F
1/4-20 X 1-1/4" SOC FLAT C/S 1
3
10
H-SS 1/4 FL HEAD
1/4-20 X 3/4" SOC FLAT C/S SS
2
11
H-SS 3/8 F NUT
6
2
3
12
H-SS 3/8 FLT WASHER
12
4
3
13
H-SS 3/8X1 H B
2
14
H-SS 3/8X1-3/4
6
15
H-SS 3/8 WEDGE
3/8” X 2-3/4” WEDGE ANCHOR, NUT & FLAT W S.S.
2
3
16
H-1 BALL VALVE
BALL VALVE, 1" SLIP WHITE
17
DECK ANCHOR
DECK ANCHOR, 9" STAINLESS STEEL
1**
18
H-WRS/WW GASKET
GASKET, CLOSED CELL NEOPRENE SPONGE
19
L-BRACKET
L-BRACKET, LADDER ANCHOR, WHITE
2
NOT SHOWN (For WWS-CL-SS Only)
20
13" LEG
LEG 13"
21
16-3/4" LEG
LEG 16-3/4"
22
32-5/8" LEG
LEG 32-5/8"
23
H-1 SPA HOSE
PVC FLEX PIPE, 1" X 10'
24
WWS-HR
WHITEWATER HANDRAIL
25
WWS-LRUN-W-R
WHITEWATER LOWER RUNWAY
26
WWS-STEP-W
WHITEWATER STEP WHITE
27
WWS-URUN-W-R
WHITEWATER UPPER RUNWAY
28
H-ANTI-SEIZE
ANTI-SEIZE PACKET (NOT SHOWN)
* not pictured
** Comes with one (1) deck anchor and one (1) SH-106 kit. Must order one for each leg of the slide (4 total). 4 are included when ordering a complete slide.
** Comes with one (1) deck anchor and (1) SH-106 kit. Must order one for each leg of slide (4) total.
1*
ITEM #
COMPONENT
DESCRIPTION
WWS
SH-108
SH-107
SH-106
SH-105
SH-104
SH-103
SH-102
1
2
2
1*
2
1
1
1
1*
NOTES:
White Water slides available in both right and left turns.
White Water slides available with optional custom powder coated or thermo plastic coated handrails and legs.
TG - Rev. 7/15
39
RESIDENTIAL SLIDES
<---
EDGESTONE SLIDE ROCK™:
Powder Coated
Handrails
Zoom-flume™
Water Supply System
62”
RESIDENTIAL SLIDES
48.5”
seating
F E AT U R E S :
Construction (Rock Panels)
• Slide Available in Tan & Gray
• Available in Right Turn Only
Front Rock Panel
Standard Stainless Steel Legs
and Deck Flanges
Deep Flume
provides sliding
• Stainless Steel Legs & Hardware
• Standard Powder Coated Handrails with Tan
or Gray Slide Rock Slide
• Simulated Rock Accents (Front & Rear Rock
Accents Available Separately)
Slide Flume
ES SLIDE ROCK™
Edgestone Rock Colors = Graystone: -33; Brownstone: -34
Powder Coated Rail Colors = Tan slide comes with Earth: -3;
Gray slide comes with Hammertone Gray: -6;
DESCRIPTION
PART NUMBER
ES Slide Rock - right - tan
ES Slide Rock - right - gray
comes w/ss hardware
Part #7920
Part #7930
Edgestone Slide Rock™
Edgestone Slide Rock™ shown with
Edgestone Scupper™
Edgestone Slide Rock™ Footprint
for RIGHT Turn Only Slide
40
TG - Rev. 7/15
CLICK 8
ZOOMERANG™ SLIDE:
Stainless Steel
Rails & Legs
Zoom-flume™
Water Supply System
48”
F E AT U R E S :
• Durable & Long Lasting Acrylic Construction
• Available in White Only
• Available in Right Turn Only
• 37” High at Seating Area
Stainless Steel Rails, Legs & Hardware
Discreetly Sits Below a 6’ Privacy Fence
Minimum Water Depth of 3’6”
Water Supply Attaches Directly to Pool
Return Inlet
37”
seating
RESIDENTIAL SLIDES
•
•
•
•
ZOOMERANG™ SLIDE
Deep Flume
provides sliding
DESCRIPTION
PART NUMBER
Zoomerang Slide - right - white
Part #ZM-CR-SS
comes w/ss hardware
Zoomerang™ Footprint for
RIGHT Turn Only Slide
TG - Rev. 7/15
41
ZOOMERANG™ SLIDE
(ZM-CR-SS) :
RESIDENTIAL SLIDES
42
TG - Rev. 7/15
CLICK 8
ZOOMERANG™ SLIDE
(ZM-CR-SS) :
RESIDENTIAL SLIDES
<---
ZM-H1-SS: Ladder Assembly; Flume to Ladder; Ladder to Deck
ZM-H2-SS: Base to Flume; Base to Deck
ZM-CR-SS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
* not pictured
ZOOMERANG RUNWAY
FLUME SUPPORT BASE
ZOOMERANG LADDER
ZOOMERANG LADDER TREADS
ZOOMERANG HANDRAILS
LADDER ESCUTCHEONS
GRAY PROTECTIVE CAP
GRAY PROTECTIVE CAP
.500 OD X.257 ID NYLON BUSHING
3/8” FINISH NUT S.S.
3/8” X 2-3/4” WEDGE ANCHOR W/NUT & WASHER S.S.
3/8” X 3” HEX HEAD TAP BOLT S.S.
5/16 X 2 3/4” LADDER BOLT S.S.
5/16” SAE FLAT WASHER S.S.
5/16”HEX FINISH NUT S.S.
1-5/8” X 1/2” WHITE VINYL CAP
ZOOMERANG RETURN ADAPTER
ZOOM
DESCRIPTION
ZM-R
ZM-B
ZM-Ladder
ZM-T
ZM-HR
LADDER ESCUTCHEONS
H-.463 X .310 CAP
H-.562 X .390 CAP
H-NYLON BUSHING
H-SS 1/4 FLAT W
H-SS 1/4 H C/S
H-SS 1/4 H NUT
H-SS 3/8 FLT WASHER
H-SS 3/8 F NUT
H-SS 3/8 WEDGE
H-SS 3/8 X 3 TAP
H-SS 5/16 BOLT
H-SS 5/16 F WAS
H-SS 5/16 H NUT
H-VINYL NUT CAP
ZM-RA
ZM
COMPONENT
ZM-H2-SS
ITEM #
ZM-H1-SS
1
1
2
3
2
2
3
3
3
6
3
3
4
4
4
6
6
6
2
1
3
1*
NOTES:
Zoomerang available in white only.
Zoomerang available in right turn only.
TG - Rev. 7/15
43
CITY 2™ SLIDE:
Zoom Flume™
Water Supply System
90”
F E AT U R E S :
• Available in White, Blue, Tan & Gray
• Flume Depth = 5”
• Extruded Aluminum Ladder, Handrails & Legs
RESIDENTIAL SLIDES
• Optional Deck Mounting Flanges Available
(must order separately)*
• 1 Year Warranty
72”
seating
CITY 2™ SLIDE - RIGHT
DESCRIPTION
City
City
City
City
2
2
2
2
Slide
Slide
Slide
Slide
-
PART NUMBER
right
right
right
right
-
white
blue
tan
gray
Part
Part
Part
Part
#CITY2-CRW
#CITY2-CRB
#CITY2-CRT
#CITY2-CRG
comes w/ss hardware
*optional deck mounting flanges CITY-DECK ANCH (1 each)
Optional Deck Mounting
Flanges (Sold Separately)
City 2™ Slide Footprint
44
TG - Rev. 7/15
CLICK 8
CITY 2™ SLIDE:
Zoom Flume™
Water Supply System
90”
F E AT U R E S :
• Available in White, Blue, Tan & Gray
• Flume Depth = 5”
• Extruded Aluminum Ladder, Handrails & Legs
72”
seating
RESIDENTIAL SLIDES
• Optional Deck Mounting Flanges Available
(must order separately)*
• 1 Year Warranty
CITY 2™ SLIDE - LEFT
DESCRIPTION
City
City
City
City
Optional Deck Mounting
Flanges (Sold Separately)
Slide
Slide
Slide
Slide
-
left
left
left
left
PART NUMBER
-
white
blue
tan
gray
Part
Part
Part
Part
#CITY2-CLW
#CITY2-CLB
#CITY2-CLT
#CITY2-CLG
comes w/ss hardware
*optional deck mounting flanges CITY-DECK ANCH (1 each)
City 2™ Slide Footprint
for LEFT Turn Slide
TG - Rev. 7/15
45
CITY 2™ SLIDE
(CITY2-CLW) :
RESIDENTIAL SLIDES
46
TG - Rev. 7/15
CLICK 8
CITY 2™ SLIDE
(CITY2-CLW) :
<--DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
CITY2-CL (shown)
CITY2-CR
RESIDENTIAL SLIDES
CS-101-SS: Handrails; Ladder to Deck; Leg to Flume
CS-102-SS: Flume to Flume
* City Slide Deck Anchors are Sold Separately (4 required for
a complete City Slide install)
3
H-C2 L GASKET or H-C2 R GASKET
Gasket (either right turn or left turn gasket)
4
CITY-LADDER
Aluminum Ladder Assembly
5
CITY HANDRAIL
Aluminum Slide Handrails
6
H-45.500 LEG
45.50” Aluminum Slide Leg
7A
H-23.250 LEG
7B
H-20.500 LEG
8
CITY-DECK ANCH
Deck Anchor (optional item; ordered separately)
9
5/16” Concrete Insert Lag Shield
10
5/16” x 2-1/2” Hex Lag Screw S.S.
11
1/4” x 3” Hex Bolt S.S.
12
1/4” Flat Washer S.S.
13
1/4” x 3/8” Aluminum Bushing
14
1/4” Lock Washer S.S.
15
1/4” Finish Nut S.S.
16
1/4” x 2-1/4” Wedge Anchor S.S. w/Washer
17
1/4” x 2-1/4” Tap Bolt S.S.
18
1/4” x 12” Carriage Bolt
19
7-1/2” Aluminum Spacer
20
Round to Flat Nylon Connector
21
Round to Flat Nylon Connector w/Wedge
22
1/4” x 1-1/4” Machine Bolt S.S.
23
5-1/2” Aluminum Spacer
24
1/4” x 7-1/2” Carriage Bolt S.S.
25
Round to Round Nylon Connector
26
H-.562 X .390 CAP
Gray Protective Cap
27
H-SS 3/8 X 1-3/4
3/8” x 1-3/4” Hex Head Bolt S.S.
28
H-SS 3/8 FLT WASHER
3/8” x 1” Flat Washer S.S.
29
H-SS 3/8 LOC WASHER
3/8” Lock Washer S.S.
30
H-SS 3/8 F NUT
3/8” Finish Nut S.S.
31
#14 x 3/4” S.S. Pan Head Screw
32
H-1/2 SPA HOSE
1/2” Spa Hose - 10 ft
33
H-1/2 BALL VALVE
1/2” On/Off Ball Valve
* OPTIONAL - Deck Anchors are Sold Separately. Must order 1 for each slide leg for a total of 4.
** not pictured
CITY 2
City 2 Upper Runway
City 2 Lower Runway
CITY-DECK
ANCH (4)
DESCRIPTION
CITY2-URUN
CITY2-LRUN
CITY2-PRTS
PACK
COMPONENT
1
2
CS-102-SS
ITEM #
CS-101-SS
1
1
1
1
2
2
1
1
1*
4*
4*
1*
4*
1*
8
8
8
4
2
2
2
4
4
2
2
2
4
1*
.
12
6
12
6
6
8
1**
1**
NOTES:
City 2 Slides available in white, blue, tan and gray.
City 2 Slides available in both right and left turns.
TG - Rev. 7/15
47
Adrenaline™ Slide
Male Model Stands at 5’11”
RESIDENTIAL SLIDES
G-Force 2™ Slide
48
TG - Rev. 7/15
X-Stream 2™ Slide
CLICK 8
F E AT U R E S :
• Slides Shown On This Page Are Constructed of
Rotational Molded - Polyethylene on Flumes,
Steps, Rails & Leg Supports (PVC Legs)
• All Inter-Fab Slides Feature the Utmost in Safety
& Performance
• Exclusive Zoom-Flume™ Water Delivery Systems
• StableSafe™ Climbing System
• Super Safe Slip Resistant Treads
• Water Park Style U-Shaped Flumes
• All Ship With Stainless Steel Hardware
• Stainless Steel or U.V. Resistant Plastic
Components - NO Aluminum Parts
Part # XS-GR-SS
Part # XS-TA-SS
comes w/ss hardware
X-Stream 2™ Slide
COLORS
X-Stream 2
G-Force 2
Adrenaline
Summit Gray
X
X
X
Desert Tan
X
X
X
StableSafe™ Climbing System:
STABILITY
BASE
Part # G4C-G
Part # G4C-T
comes w/ss hardware
G-Force 2™ Slide
SAFETY TREAD
W/TOE STOP
Part # ADR1-CR-G
Part # ADR1-CL-G
Part # ADR1-CR-T
Part # ADR1-CL-T
comes w/ss hardware
Adrenaline™ Slide
GRIP-AROUND HANDRAIL
AT CORRECT WIDTH
TG - Rev. 7/15
49
RESIDENTIAL SLIDES
RESIDENTIAL SLIDES – POLYETHYLENE:
X-STREAM 2™ SLIDE:
Water Supply System
90”
Assembles in
Right OR Left Turn
(shown as Right Turn)
RESIDENTIAL SLIDES
72.5”
seating
F E AT U R E S :
• Rotational Molded - Polyethylene
Construction on Flume, Steps, Rails & Leg
Supports (PVC Legs)
• Available in Summit Gray & Desert Tan
• 1 SKU Assembles in Right OR Left Turn
• Fantastic Water Supply System
StableSafe™
Base
Deep Flume
provides sliding
• Stainless Steel Hardware
• StableSafe™ Climbing System includes
Heavy Fiberglass Stability Base, Deep SlipResistant Treads with Toe Stops, and GripAround™ Handrails
• 3 Year Warranty
X-STREAM 2™ SLIDE
X-Stream 2 Footprint for
RIGHT Turn Slide
DESCRIPTION
PART NUMBER
X-Stream Slide - right/left - gray
X-Stream Slide - right/left - tan
Part #XS-GR-SS
Part #XS-TA-SS
comes w/ss hardware
RECOMMENDED
MIN. DECK AREA:
14’ X 8’6”
50
TG - Rev. 7/15
CLICK 8
X-STREAM 2™ SLIDE:
Assembles in
Right OR Left Turn
90”
72.5”
seating
RESIDENTIAL SLIDES
Water Supply System
F E AT U R E S :
Supports (PVC Legs)
• 1 SKU Assembles in Right OR Left Turn
Deep Flume
provides sliding
StableSafe™
Base
Heavy Fiberglass Stability Base, Deep SlipResistant Treads with Toe Stops, and GripAround™ Handrails
• 3 Year Warranty
X-STREAM 2™ SLIDE
X-Stream 2 Footprint for
LEFT Turn Slide
DESCRIPTION
PART NUMBER
X-Stream Slide - right/left - gray
X-Stream Slide - right/left - tan
Part #XS-GR-SS
Part #XS-TA-SS
comes w/ss hardware
RECOMMENDED
MIN. DECK AREA:
14’ X 8’6”
TG - Rev. 7/15
51
X-STREAM 2™ SLIDE
(XS-GR-SS) :
RESIDENTIAL SLIDES
52
TG - Rev. 7/15
CLICK 8
X-STREAM 2™ SLIDE
(XS-GR-SS) :
<---
XS-101-SS: PVC Leg to Foot Receiver
XS-102-SS: Flume to Flume
XS-103-SS: PVC Leg to Flume
XS-104-SS: Foot Receiver to Deck
XS-105-SS: Handrails
XS-GR-SS
COMES AS PART OF ENTRY SECTION
STEP
ASSEMBLY
1
1
1
1
5
4
8
16
25
15
25
15
6
6
12
6
13
13
13
8
8
10
8
12
5
4
14
10
4
3
1*
5*
10 ft.*
GRAY SPA HOSE FOR STEP ASSEMBLY, 10 FT. LENGTH
COMPLETE ASSEMBLED STEP, INCLUDES ITEMS 8, 11, 12, & 29
XS2-105-SS
1
1
1
1
1
1
2
3/8” X 2-3/4” WEDGE ANCHOR W/NUT & FLAT WASHER S.S.
3/8” X 2-1/2” ALL-THREAD STUD S.S.
5/16” HEX FLANGE NUT S.S.
5/16” X 2” ALL-THREAD STUD S.S.
U-SHAPED GASKET - 3 HOLES
1" BALL VALVE-SLIP GRAY
NAT NYLON ROL 101 .375 DIA.
XS-104-SS
A & B RIGHT HAND FLUME SECTION
C & D LEFT HAND FLUME SECTION
BOTTOM SECTION
TOP SIDE SECTION WITH WATER OUTLET
LEFT HANDRAIL WITH X-STREAM LOGO
RIGHT HANDRAIL WITH X-STREAM LOGO
STRAIGHT FOOT PEDESTAL
16 DEGREE FOOT PEDESTAL
6" X 21.250" GRAY PVC PIPE SCHEDULE 40
X-STREAM BLOW MOLDED STEP
GRAY PROTECTIVE CAP
GRAY PROTECTIVE CAP
3/8” LOCK WASHER S.S.
3/8” NYLON INSERT NUT S.S.
XS-103-SS
XS-RIGHT FLUME
XS-LEFT FLUME
XS-EXIT
XS-ENTRY
XS-L HANDRAIL
XS-R HANDRAIL
XS-FOOT PEDESTAL
PEDESTAL
H-6 X 21.250
H-6 X 45.375
H-6 X 71.5
XS-STEP
H-.463 X .310 CAP
H-.562 X .390 CAP
H-SS 3/8 F NUT
H-SS 3/8 FLT WASHER
H-SS 3/8 LOC WASHER
H-SS 3/8 NYLON
H-SS 3/8 WEDGE
H-SS 3/8 X 3 TAP
H-SS 3/8-16X2
H-SS 3/8X2-1/2
H-SS 5/16 FLA WASHER
H-SS 5/16 HEX FLANGE
H-SS 5/16 X 2
H-SS 5/16 X 2-1/2
H-G4C GASKET
H-1 BALL VALVE
H-NYLON ROD 101
H-1 SPA HOSE
XS2 WATER OUTLET
XS-STEP COMP
H-ANTI-SEIZE
H-SS 3/8 X 7-1/2
H-SS 3/8 X 3-1/2 W
H .531 X 1 GRAY
XS2-102-SS
DESCRIPTION
RESIDENTIAL SLIDES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
* not pictured
COMPONENT
XS-101-SS
ITEM #
XS-GR-SS
1*
1
3/8” X 7-1/2” HEX HEAD BOLT
6
5
.531” X 1” GRAY PROTECTIVE CAP
6
NOTES:
X-Stream 2 slide available in Summit Gray or Desert Tan
X-Stream 2 can turn to the right or the left
TG - Rev. 7/15
53
G-FORCE 2™ SLIDE:
Water Supply System
88”
72”
seating
RESIDENTIAL SLIDES
F E AT U R E S :
Supports (PVC Legs)
• Assembles in One Direction Only With
Straight Exit Into the Pool
Heavy Fiberglass Stability Base, Deep
Slip-Resistant Treads with Toe Stops, and
Grip-Around™ Handrails
• 3 Year Warranty
StableSafe™
Base
G-FORCE 2™ SLIDE
Deep Flume Provides Sliding
Comfort for All Ages
DESCRIPTION
PART NUMBER
G-Force Slide Complete - gray
G-Force Slide Complete - tan
Part #G4C-G
Part #G4C-T
comes w/ss hardware
G-Force 2 Footprint When
Slide Pivoted From Rear to The Left
RECOMMENDED
MIN. DECK AREA:
8’6” x 6’11”
54
TG - Rev. 7/15
CLICK 8
G-FORCE 2™ SLIDE:
88”
72”
seating
F E AT U R E S :
Supports (PVC Legs)
• Assembles in One Direction Only With
Straight Exit Into the Pool
RESIDENTIAL SLIDES
Water Supply System
• 3 Year Warranty
StableSafe™
Base
Deep Flume Provides Sliding
Comfort for All Ages
G-FORCE 2™ SLIDE
DESCRIPTION
PART NUMBER
G-Force Slide Complete - gray
G-Force Slide Complete - tan
Part #G4C-G
Part #G4C-T
comes w/ss hardware
G-Force 2 Footprint When
Slide Pivoted From Rear to The Right
RECOMMENDED
MIN. DECK AREA:
8’6” x 6’11”
TG - Rev. 7/15
55
G-FORCE 2™ SLIDE
(G4C) :
RESIDENTIAL SLIDES
56
TG - Rev. 7/15
CLICK 8
G-FORCE 2™ SLIDE
(G4C) :
<---
G4C-101: PVC Leg to Foot Receiver
G4C-102: Flume to Flume
G4C-103: PVC Leg to Flume; Helix to Pole
G4C-104: Foot Receiver to Deck
G4C-105: Handrails
G4C
H-SS 1/2 LOC WA
H-SS 1/2X3-3/4
H-SS 3/8 ACORN
H-SS 3/8 F NUT
H-SS 3/8 FENDER
H-SS 3/8 FLT WASHER
H-SS 3/8 LOC WASHER
H-SS 3/8 NYLON
H-SS 3/8 WEDGE
H-SS 3/8 X 3 TAP
H-SS 3/8 X 3-1/2 W
H-SS 3/8-16X2
H-SS 3/8X2-1/2
H-SS 3/8X5 BUTT
H-SS 5/16 FLA WASHER
H-SS 5/16 SER
H-SS 5/16 X 2
H-SS 5/16 X 2-1/2
H-SS 5/16 X 3
G4C-STEP ASSEMBLY
PEDESTAL
XS-FOOT PEDESTAL
G4C-WATER OUTLET
H-6 x 17.125
G4C2-LEG EXT
SS-HELIX TUBE
G4C2-EXIT
G4C2-HELIX
G4C2-ENTRY
G4C-R HANDRAIL
G4C-L HANDRAIL
H-G4C GASKET
H-SS 3/8 X 7-1/2
H-.531 X 1 GRAY
H-ANTI-SEIZE
H-1 SPA HOSE
8
9
4
8
1/2” SPLIT LOCK WASHER S.S.
4
4
3/8” ACORN NUT
3/8” X 1-1/2” FENDER WASHER
3/8” LOCK WASHER S.S.
3/8” NYLON INSERT NUT S.S.
10
16
15
10
2
4
4
8
4
9
9
8
4
5
5
3/8” X 3-1/2” SS WEDGE ANCHOR W/NUT & FLAT WASHER
3/8” X 5” BUTTON HEAD SOCKET BOLT
5/16” SERRATED FLANGE NUT
COMPLETE ASSEMBLED STEP ASSEMBLY
16 DEGREE FOOT PEDESTAL
WATER OUTLET (NOT SHOWN)
6 X 17.125 GRAY PVC PIPE SCHEDULE 40
G4C2 HELIX POLE EXTENSION
STEEL CENTER SUPPORT POLE
G4C2 EXIT SECTION
G4C2 HELIX SECTION
G4C2 ENTRY SECTION
G-FORCE RIGHT HANDRAIL
G-FORCE LEFT HANDRAIL
GASKET FOR G-FORCE SLIDE
3/8” X 7-1/2 HEX HEAD BOLT S.S.
.531 X 1” GRAY PROTECTIVE CAP
G4C
15
RESIDENTIAL SLIDES
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
* not pictured
8
G4C-105
GRAY PROTECTIVE CAP
GRAY PROTECTIVE CAP
.750” X 1” GRAY NUT CAP
G4C-104
DESCRIPTION
H-.463 X .310 CAP
H-.562 X .390 CAP
H-1 WHT CAP
G4C-103
COMPONENT
1
2
3
G4C-102
ITEM #
G4C-101
8
8
5
GRAY SPA HOSE FOR STEP ASSEMBLY, 10 FT. LENGTH
NOTES:
G-Force 2™ slide available in Summit Gray or Desert Tan
2
4
14
6
4
4
1
1
2
1
1
1
1
1
1
1
1
1
2
4
4
1*
10 ft.*
TG - Rev. 7/15
57
ADRENALINE™ SLIDE:
Water Supply System
101”
Available in
Right OR Left Turn
84”
seating
F E AT U R E S :
• Rotational Molded - Polyethylene Construction on
Flume, Steps, Rails & Leg Supports (PVC Legs)
• Available in Right OR Left Turn
• Flume Width = 25”
RESIDENTIAL SLIDES
StableSafe™
Base
Deep Flume
provides sliding
Pre-launch Splash Zone™
• Pre-launch Splash Zone™
• 3 Year Warranty
ADRENALINE™ SLIDE
DESCRIPTION
PART NUMBER
Adrenaline Slide - right - gray
Adrenaline Slide - right - tan
Part #ADR1-CR-G
Part #ADR1-CR-T
comes w/ss hardware
Adrenaline Footprint for
RIGHT Turn Slide
58
TG - Rev. 7/15
CLICK 8
ADRENALINE™ SLIDE:
Water Supply System
101”
Available in
Right OR Left Turn
(shown as Left Turn)
84”
seating
F E AT U R E S :
• Rotational Molded - Polyethylene Construction on
Flume, Steps, Rails & Leg Supports (PVC Legs)
• Available in Right OR Left Turn
• Flume Width = 25”
Pre-launch Splash Zone™
StableSafe™
Deep Flume
Base
provides sliding
RESIDENTIAL SLIDES
• Pre-launch Splash Zone™
• 3 Year Warranty
ADRENALINE™ SLIDE
DESCRIPTION
PART NUMBER
Adrenaline Slide - left - gray
Adrenaline Slide - left - tan
Part #ADR1-CL-G
Part #ADR1-CL-T
comes w/ss hardware
Adrenaline Footprint for
LEFT Turn Slide
TG - Rev. 7/15
59
ADRENALINE™ SLIDE
(ADR1-CR SHOWN) :
RESIDENTIAL SLIDES
60
TG - Rev. 7/15
CLICK 8
ADRENALINE™ SLIDE
(ADR1-CR SHOWN) :
<---
ADR-101-SS: PVC Leg to Foot
ADR-102-SS: Flume to Flume
ADR-103-SS: PVC Leg to Flume
ADR-104-SS: Foot Pedestal to Deck
ADR-105-SS: Handrails to Entry and Steps
ADR1-CR & ADR1-CL
ADR-WATER GSKT
ADR-WATER OUTLE
ADR-GASKET
H-6 X 80.375
XS-STEP
PEDESTAL
H-6 X 40.750
H-6 X 19.750
XS-FOOT PEDESTA
ADR-3/8X1/2 TUB
ADR-RED CAP
ADR-3/8 HOSE
ADR-16 GA WIRE
H-SS 3/8X3 TAP
H-SS 3/8 FLT WA
H-SS 3/8 F NUT
H-SS 3/8 LOC WA
H-.562X.390 CAP
H-SS 3/8 X 9-1/2
H-SS 3/8-16X2HH
H-SS 3/8 NYLON
H-SS 3/8 WEDGE
H-SS 3/8X3-1/2 W
H-SS 5/16X4 AT
H-SS 5/16X5 AT
H-SS 5/16 SER
H-SS 5/16X2-1/2
H-SS 5/16 F WAS
H-.463X.310 CAP
H-1 BALL VALVE
H-NYLON ROD
H-1 SPA HOSE
H-ANTI-SEIZE
WATER OUTLET GASKET (FACTORY INSTALLED)
WATER OUTLET (FACTORY INSTALLED)
3/8" "U" SHAPED FLANGE GASKET
6" X 80.375" GRAY PVC PIPE (STEP TUBE)
BLOW MOLDED GRAY STEP
STEP TUBE FOOT PEDESTAL GRAY
6" X 40.750" GRAY PVC PIPE
6" X 19.750" GRAY PVC PIPE
3/8" X 1/2" CLEAR VINYL TUBING
RED VINYL CAP
3/8" HOSE CONNECTOR
16 GA FISH WIRE
3/8" X 3" HEX HEAD TAP BOLT S.S.
3/8" X 1" FLAT WASHER S.S.
3/8" FINISH NUT S.S.
3/8" LOCK WASHER S.S.
GRAY VINYL PROTECTIVE CAP
3/8" X 9 1/2" HEX HEAD BOLT S.S.
3/8" X 2" HEX HEAD BOLT S.S.
3/8" NYLON INSERT NUT S.S.
1
1
3
1
6
1
1
1
2
12 FT
1
1
10 FT
1
1
3
1
6
1
1
1
2
12 FT
1
1
10 FT
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
* not pictured
16
8
12
6
6
12
6
17
17
8
8
8
9
3/8" X 2 3/4" WEDGE ANCHOR W/NUT AND FLAT WASHER S.S.
3/8" X 3 1/2" WEDGE ANCHOR W/NUT AND FLAT WASHER S.S.
5/16" X 4" ALL-THREAD STUD S.S.
5/16" X 5" ALL-THREAD STUD S.S.
5/16" FLANGE NUT S.S.
5/16" X 2 1/2" ALL-THREAD STUD S.S.
5/16" FLAT WASHER S.S.
GRAY VINYL PROTECTIVE CAP
1" BALL VALVE SLIP GRAY (NOT SHOWN)
NATURAL NYLON 101 .375" DIA. (NOT SHOWN)
1" GRAY SPA HOSE FLEX (NOT SHOWN)
ANTI SEIZE PACKET (NOT SHOWN)
ADRENALINE STEP/PEDESTAL ASSEMBLY
15
30
15
15
30
RESIDENTIAL SLIDES
1
1
1
1
1
1
ADR-105-SS
1
1
1
1
1
1
ADR-104-SS
ADR1-CL
ADRENALINE RIGHT (LEFT) ENTRY
ADRENALINE RIGHT (LEFT) UPPER FLUME
ADRENALINE RIGHT (LEFT) LOWER FLUME
ADRENALINE RIGHT (LEFT) EXIT
ADRENALINE RIGHT HANDRAIL
ADRENALINE LEFT HANDRAIL
ADR-103-SS
DESCRIPTION
ADR-R (L) ENTRY
ADR-R (L) UPPER FLU
ADR-R (L) LOWER FLU
ADR-R (L) EXIT
ADR-R HANDRAIL
ADR-L HANDRAIL
ADR-102-SS
COMPONENT
1
2
3
4
5
6
ADR-101-SS
ITEM #
ADR1-CR
6
4
16
6
6
6
1*
1*
6*
6*
12 ft.* 12 ft.*
1*
1*
1
1
NOTES:
Adrenaline slide available in Summit Gray or Desert Tan
Adrenaline slide is available in a right or left turn configuration
TG - Rev. 7/15
61
LANDSCAPE SLIDES – INFUSION:
BUILD YOUR OWN SLIDE (BYOS™) & GARDEN RIDE SLIDES (GRS™)
The BYOS 1 & 2 slides are CUSTOM slides and must
be ordered by following the quote and design
process at Inter-Fab. Phone: 8 0 0 - 7 3 7 - 5 3 8 6
See pages 145-148 for BYOS quote forms.
RESIDENTIAL SLIDES
The Build Your Own Slide™ (BYOS™)
products provide easy slide
solutions to builders
incorporating handcrafted
rock work or concrete
formations into custom
backyard settings.
LANDSCAPE SLIDE COLORS AVAILABLE:
Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54;
Pebble: -55; Fashion Gray: -56; Cappuccino: -57;
Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60
BYOS 1 PROJECT
FEATURES:
• Three Collections (BYOS 1, BYOS 2, & Garden
Ride Series) offer Custom Flume Sections That
Can Be Used in Various Combinations (BYOS
1, BYOS 2, & Garden Ride Series Parts Are
Not Interchangeable)
• Zoom Flume™ Water Delivery System
• Stainless Steel Construction Anchoring System
Included with BYOS 1 & 2; Optional with GRS
• Stainless Steel Hardware Included
• Earth Tones & Granite Colors Available
• Advanced High-Tech RTM Manufacturing
• BYOS 1 Weight Limit = 250 lbs.
• GRS Weight Limit = 350 lbs.
• Multiple Patents Pending
BYOS 2 PROJECT
15’ GRS
BYOS 1 & 2 SLIDES: Customizable by length and shape. (Must pass Inter-Fab safety requirements.)
GARDEN RIDE SLIDES: Pre-set slide configurations available in 7’, 10’ and 15’ lengths; left and right turns available.
MATCHING PRODUCTS AVAILABLE:
The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the
Landscape Slide products perfectly for a complete designer pool look.
Add on matching products to your pool design to create a custom, color coordinated theme specific to the homeowner’s
style and décor.
T7 Diving System
62
TG - Rev. 7/15
Pool/Spa Table and Seats
Tanning Ledge Table
with Cup Holders
CLICK 8
The BYOS 1 & 2 slides are CUSTOM slides and must
be ordered by following the quote and design
process at Inter-Fab. Phone: 8 0 0 - 7 3 7 - 5 3 8 6
BYOS 1 & BYOS 2 SLIDE COLORS AVAILABLE:
BYOS 1 slides are designed for use in residential pool applications.
BYOS 2 slides are designed for use in both residential pool
applications and commercial pool applications.
Matching Products: The T7 Diving System™, Pool/Spa Table™,
Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to
match the Landscape Slide products perfectly for a complete
designer pool look.
BYOS FEATURES:
• Collections of Different Flume Sections that can
be Used in Various Combinations
• Exclusive Zoom Flume™ Water Delivery System
(TWO on BYOS 2 slide)
• Stainless Steel Construction Anchoring System
Included
• Optional Handrails Available (Standard on BYOS 2)
• BYOS 1 Weight Limit = 250 lbs
• BYOS 1 = 20-40 GPM (Actual GPM rating will vary depending on
specific pool size and pool equipment used.)
(Actual GPM rating will vary depending on
specific pool size and pool equipment used.)
• BYOS 2 = 40-80 GPM
• 1 Year Warranty
• See pages 145-148 for BYOS Quote Forms
BYOS 1 SLIDE:
1
2
3
4
5
6
Zoom Flume™
Water Supply System
7
8
BYOS 1 Anchors
Compatible with
18” Sonotubes*
9
10
BYOS 1 Flume Dimensions
1
BYOS 2 SLIDE:
2
3
4
5
6
7
BYOS 2
Anchors
Compatible
with 18”
Sonotubes*
TWO Zoom Flume™
Water Supply Systems
* Refer to the BYOS 1 & 2 installation manual for details.
TG - Rev. 7/15
63
RESIDENTIAL SLIDES
BYOS 1™ & BYOS 2™ SLIDES:
GARDEN RIDE SERIES – 7’ SLIDE:
Part # GRS7-CR-XX
comes w/ss hardware
F E AT U R E S :
• Optional Stainless Steel Anchoring System
Available
• Powder Coated Handrails Included
• 20-40 GPM (Actual GPM rating will vary depending on specific pool size
and pool equipment used.)
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
• See page 149 for GRS Product Selection Guide
GARDEN RIDE SLIDE COLORS AVAILABLE:
(add custom color code behind part #)
7’ Garden Ride Footprint for
RIGHT Turn Slide
64
TG - Rev. 7/15
CLICK 8
Part # GRS7-CL-XX
comes w/ss hardware
F E AT U R E S :
Available
LEFT Turn Slide
TG - Rev. 7/15
65
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
Part # GRS10-CR-XX
comes w/ss hardware
F E AT U R E S :
Available
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
RIGHT Turn Slide
66
TG - Rev. 7/15
CLICK 8
Part # GRS10-CL-XX
comes w/ss hardware
F E AT U R E S :
Available
LEFT Turn Slide
TG - Rev. 7/15
67
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
Part # GRS15-CR-XX
comes w/ss hardware
F E AT U R E S :
Available
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
RIGHT Turn Slide
68
TG - Rev. 7/15
CLICK 8
Part # GRS15-CL-XX
comes w/ss hardware
F E AT U R E S :
Available
LEFT Turn Slide
TG - Rev. 7/15
69
RESIDENTIAL SLIDES
designer pool look.
• 1 Year Warranty
INSTALLATION HEIGHT INFORMATION FOR GARDEN RIDE SERIES – 7’ SLIDE:
MEASUREMENTS: 7’ GRS LEFT TURN
RESIDENTIAL SLIDES
LEFT TURN WITH SUPPORTS
LEFT TURN WITHOUT SUPPORTS
MEASUREMENTS: 7’ GRS RIGHT TURN
RIGHT TURN W/SUPPORTS
RIGHT TURN WITHOUT SUPPORTS
SLIDE POSITION: 7’ GRS
GRID INCREMENTS IN FEET
7’ GRS Left Turn
7’ GRS Right Turn
NOTE: Please refer to the installation manual for detailed installation instructions and information.
70
TG - Rev. 7/15
CLICK 8
RESIDENTIAL SLIDES
10’ GRS Left Turn
10’ GRS Right Turn
TG - Rev. 7/15
71
RESIDENTIAL SLIDES
15’ GRS Left Turn
15’ GRS Right Turn
72
TG - Rev. 7/15
CLICK 8
TRADITIONAL RAILS & LADDERS: OVERVIEW
FEATURES:
• Durable & Long Lasting Residential .049” wall Stainless Steel
Construction (304 SS & 316L)
• Most Rails also Available in Commercial .065” wall Construction
(304 SS & 316L)
• Rail Categories:
1) Ladders
2) Stair Rails
3) Handrails
4) Grab/Spa Rails
5) Exercise Bars
We offer a zinc anode to help
protect your rails in more
corrosive pool environments.
The anode can be attached on a ladder near the
ladder bumper or on a standard rail near the
escutcheon. (Part #ANODE)
CUSTOM POWDER COATED COLORS FOR ALL RAIL GOODS:
White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9
(You must add the custom color code behind part # when ordering.)
On ALL powder coated rails, the bottom 4” of the stainless steel rail is NOT
coated. If you use 3” anchors, a 3” option is available upon request.
THERMO PLASTIC COATED COLORS FOR ALL RAIL GOODS:
White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T
(You must add the custom color code behind part # when ordering.)
All thermo plastic coated rails are encapsulated in plastic coating and sealed
at the ends with plastic caps.
3 LADDER TREADS AVAILABLE: (See Price List for Ladder-Specific Availability)
1) Sure Step Tread* 2) High Impact Plastic Tread** 3) Hartley Tread***
*add S after part # when ordering with Sure Step Tread
**add -P-W after part # when ordering with High Impact Plastic Tread (white only)
***add -S-H after part # when ordering with Hartley Tread (PC and TPC only)
STANDARD TREAD CONSTRUCTION:
• HIGH IMPACT PLASTIC TREAD (HIP)
• available in white only
• tread weight limit = 250 lbs.
• Residential Use Only
• SURE-STEP TREAD (SUT)
• shown in stainless steel
• available in powder coat & thermo plastic coating
• HARTLEY TREAD (SST-H)
• available in powder coat and thermo
plastic coat only
TG - Rev. 7/15
73
RAIL PRODUCTS
• Anchors are not included and recommended.
• NOTE: Escutcheons sold separately w/SS products; included with
powder coated and thermo plastic coated ladders and rails. All
measurements on center. HIP treads for RESIDENTIAL use only.
TRADITIONAL RAILS & LADDERS: OVERVIEW – CONTINUED
RAIL GOODS ALLOY AND FINISH AVAILABILITY
WALL
THICKNESS
1.90” OD
.049”
304
316L (MG)
PC
TPC
.065”
304
316L (MG)
PC
TPC
.109”
304
PC
TPC
.145”
304
PC
TPC
304
316L (MG)
PC
TPC
1.50” OD
RAIL PRODUCTS
KEY:
304
316L (MG)
PC
TPC
.120”
Pool Grade Alloy
Marine Grade Alloy
Powder Coated by Inter-Fab
Thermo Plastic Coated by Inter-Fab
PLEASE NOTE: Some rail combinations listed above may be special order. Please consult your Inter-Fab
sales representative for detailed information.
RAIL FINISHES AVAILABLE: (please see price list for rail-specific availability)
POWDER COATED: (you must add the custom color code behind part # when ordering)
THERMO PLASTIC COATED: (you must add the custom color code behind part # when ordering)
OPTIONS BELOW HELP PROTECT AGAINST HARSH ENVIRONMENTS:
PC
POWDER COAT FINISH: Baked on powder coat colors protect against harsh environments.
TP
THERMO PLASTIC COAT FINISH: Advanced Polymer Coating adds grip assistance and rail protection for harsh
pool environments.
MG
MARINE GRADE RAILS: A 316L alloy option for harsh pool environments.
74
TG - Rev. 7/15
CLICK 8
TRADITIONAL LADDERS – RAIL DESIGNS:
RESIDENTIAL LADDERS
DESCRIPTION
PART NUMBER
2
3
3
4
5
3
3
3
Part
Part
Part
Part
Part
Part
Part
Part
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Standard
Economy
Standard
Standard
Standard
Camelback
Mod Camelback
Hinged
#L2049
#L3E049
#L3049
#L4049
#L5049
#CL3049
#MCL3049
#HL3049
3 Tread
Standard
Part #L3049
3 Tread
Mod Camelback
Part #MCL3049
3 Tread
Camelback
Part #CL3049
3 Tread
Hinged
Part #HL3049
COMMERCIAL LADDERS
PART NUMBER
2 Tread Commercial Ladder
Part #COML2065
3
4
2
3
4
Part
Part
Part
Part
Part
Tread
Tread
Tread
Tread
Tread
Commercial
Commercial
Commercial
Commercial
Commercial
Ladder
Ladder
Cross Brace Ladder
Cross Brace Ladder
Cross Brace Ladder
#COML3065
#COML4065
#COML2CB065
#COML3CB065
#COML4CB065
3 Tread
Commercial
Part #COML3065
NOTE: Commercial Ladders are available in 24”, 30”, 36” spans.
See Price Book.
Commercial Ladders available with SUT or SST-H treads ONLY.
3 Tread
Commercial Cross Brace
Part #COML3CB065
RAIL PRODUCTS
DESCRIPTION
FLORIDA STYLE LADDERS
DESCRIPTION
PART NUMBER
3 Tread Florida Cross Brace Ladder
4 Tread Florida Cross Brace Ladder
Part #FLL3CB049
Part #FLL4CB049
NOTE: 3 tread Florida Ladder is available in 24”, 30”, 34”, 36” spans.
4 tread Florida Ladder is available in 34” span only.
See Price Book.
Florida Ladders available with SUT or SST-H treads ONLY.
TREAD BOLT PACKS
(NOW 316L)
DESCRIPTION
Ladder Bolt Kit (6 EA. SS)
2 Tread Ladder Bolt Kit w/Ladder
OM
CUST LS
RAI LE!
r
ILA3B
55 fo
AVpA
5 -1 ms.
gs. 1
r
o
3 Tread
Florida Cross Brace
Part #FLL3CB049
See om rail f
cust
PART NUMBER
Bumpers
Bumpers
Bumpers
Bumpers
Part
Part
Part
Part
Part
#BOL316
#BOL316-2T
#BOL316-3T
#BOL316-4T
#BOL316-5T
W/LB
W/LB
W/LB
W/LB
NOTE: To order custom colored tread bolt kits, add the code for desired
Powder Coated Colors or Thermo Plastic color behind part # when ordering.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2;
Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9
NOTE: On ALL powder coated rails, the bottom 4” of the
stainless steel is NOT powder coated. If you use 3” anchors, a
3” option is available upon request.
THERMO PLASTIC COLORS: White: -TPC-W;
Gray: -TPC-G; Tan: -TPC-T
(add custom color code behind part #
when ordering) NOTE: All thermo plastic
coated rails are encapsulated in plastic coating
and sealed at the ends with plastic caps.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book
to ensure rail finish availability.
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails.
All measurements on center. Anchors are not included and are recommended. HIP treads for RESIDENTIAL use only.
TG - Rev. 7/15
75
RESIDENTIAL – STANDARD:
PC
TP
FEATURES:
• Available in 2 Step through 5 Step
• .049” Wall Stainless Steel Construction
• 304 SS and 316L
• 1.90” OD
MG
Standard - Available in 2 Step through 5 Step
Part # L2049 - 2 Step
Part # L3049 - 3 Step (shown)
RAIL PRODUCTS
All measurements on center. Anchors are not included and recommended.
RESIDENTIAL – ECONOMY:
PC
TP
FEATURES:
• Available in 3 Step Only
• 304 SS and 316L
• 1.90” OD
MG
Standard - Economy 3 Step
Part # L3E049
76
TG - Rev. 7/15
CLICK 8
RESIDENTIAL – CAMELBACK:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
RAIL PRODUCTS
Camelback Ladder Part # CL3049
RESIDENTIAL – MODIFIED CAMELBACK:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
Modified Camelback Available in 3 Step through 5 Step
Part # MCL3049 - 3 Step (shown)
Part # MCL4049 - 4 Step
Part # MCL5049 - 5 Step
TG - Rev. 7/15
77
COMMERCIAL AND
COMMERCIAL - CROSS BRACED LADDERS:
FEATURES:
• 2 Step through 5 Step
• 24”, 30” and 36” Spans
• 6” Radius Bends
• 20” on Center Mount
• 1.90” x .065” Wall Thickness
• 304 or 316L Stainless Steel
• Stainless Steel Sure Step Tread (SUT)
• Anchors NOT included
RAIL PRODUCTS
Commercial Ladder
Part # COML336065S (shown)
PART NUMBER
COML224065S
COML324065S
COML424065S
COML524065S
COML230065S
COML330065S
COML430065S
COML530065S
COML236065S
COML336065S
COML436065S
COML536065S
COML2CB24065S
COML3CB24065S
COML4CB24065S
COML5CB24065S
COML2CB30065S
COML3CB30065S
COML4CB30065S
COML5CB30065S
COML2CB36065S
COML3CB36065S
COML4CB36065S
COML5CB36065S
DESCRIPTION
2
3
4
5
2
3
4
5
2
3
4
5
2
3
4
5
2
3
4
5
2
3
4
5
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
tread
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
commercial
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
ladder
24"
24"
24"
24"
30"
30"
30"
30"
36"
36"
36"
36"
24"
24"
24"
24"
30"
30"
30"
30"
36"
36"
36"
36"
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Sure-Step
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
Tread
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
crossbrace
PC
PC
TP
TP
MG
MG
Commercial Ladder - Cross Braced
Part # COML3CB24065S (shown)
A
B
C
D
E
26
26
26
26
26
26
26
26
31
31
31
31
26
26
26
26
26
26
26
26
31
31
31
31
24
24
24
24
30
30
30
30
36
36
36
36
24
24
24
24
30
30
30
30
36
36
36
36
17.5
17.5
17.5
17.5
23.5
23.5
23.5
23.5
29.5
29.5
29.5
29.5
17.5
17.5
17.5
17.5
23.5
23.5
23.5
23.5
29.5
29.5
29.5
29.5
51
61
71
81
51
61
71
81
61
71
81
91
51
61
71
81
51
61
71
81
61
71
81
91
25
35
45
55
25
35
45
55
30
40
50
60
25
35
45
55
25
35
45
55
30
40
50
60
78
TG - Rev. 7/15
CLICK 8
PC
TP
MG
FEATURES:
• Available in 3 Step and 4 Step
• Available in 24”, 30”, 34” and 36” Span
• 304 SS and 316L
• 1.90” OD
Florida Ladder
Part # FLL3CB24049S (shown)
Florida Style - Available in 3 Step and 4 Step
and in 24”, 30”, 34” & 36” Span
Part # FLL3CB24049 - 3 Step Florida w/24” Span
Part # FLL4CB34049 - 4 Step Florida w/34” Span NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated
ladders and rails. All measurements on center. Anchors are not included and recommended.
RESIDENTIAL – HINGED LADDER:
PC
FEATURES:
• For Use With Automatic Pool Covers
• 304 SS
• 1.90” OD
Hinged Ladder
Part # HL3049
NOTE: All measurements on center. Anchors are not included and recommended.
Escutcheons sold separately w/SS products; included with powder coated.
TG - Rev. 7/15
79
RAIL PRODUCTS
FLORIDA STYLE W/CROSS BRACE:
TRADITIONAL STAIR RAILS – RAIL DESIGNS:
STAIR RAILS
DESCRIPTION
PART NUMBER
50” Deck to Deck Stair Rail - 3 Bend .049 wall
Deck to Deck Stair Rail - 4 Bend .049 wall
Deck to Deck Stair Rail - 4 Bend .065 wall
Deck to Deck Braced Stair Rail - 3 Bend .049 wall
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
#D3D50049
#D3D50065
#D3D60049
#D3D60065
#D4D049
#D4D065
#D3BD049
#D3BD065
#D4BD049
#D4BD065
OM
CUST LS
RAI LE!
for
ILA3B
-155 .
AVpA
5
1
gs.
orms
See om rail f
cust
RAIL PRODUCTS
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G;
Tan: -TPC-T (add custom color code behind part # when ordering)
NOTE: All thermo plastic coated rails are encapsulated in
plastic coating and sealed at the ends with plastic caps.
Deck to Deck Mounted
3 Bend Stair Rail
Part# D3D50049
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
3 Bend Stair Rail w/Brace
Part# D3BD049
4 Bend Stair Rail
Part# D4D049
Part# D4BD049
80
TG - Rev. 7/15
CLICK 8
STAIR RAILS – 3 BEND:
PC
TP
FEATURES:
• Available in Commercial Grade .065”
• 304 SS and 316L
• 1.90” OD
MG
RAIL PRODUCTS
Part # D3D50049
STAIR RAILS – 3 BEND – BRACED:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
Part # D3BD049
TG - Rev. 7/15
81
STAIR RAILS – 4 BEND:
FEATURES:
• 304 SS and 316L
• 1.90” OD
PC
TP
MG
Part # D4D049
RAIL PRODUCTS
STAIR RAILS – 4 BEND – BRACED:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
Part # D4BD049
82
TG - Rev. 7/15
CLICK 8
TRADITIONAL HANDRAILS – RAIL DESIGNS:
HANDRAILS
PART NUMBER
4’ Deck to Stair Rail - 2 Bends
2.5’ Stair Side Rail (pair)
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/24” ext.
w/two 12” ext.
w/12” ext.
w/two 12” ext.
w/12” ext.
w/two 12” ext.
w/12” ext.
w/two 12” ext.
w/12” ext.
w/two 12” ext.
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
Part
#D2S4049
#D2S4049-12EXT
#D2S4049-24EXT
#D2S4049-12X2
#D2S4065
#D2S4065-12EXT
#D2S4065-24EXT
#D2S4065-12X2
#D2S5049
#D2S5049-12EXT
#D2S5049-24EXT
#D2S5049-12X2
#D2S5065
#D2S5065-12EXT
#D2S5065-24EXT
#D2S5065-12X2
#D2S6049
#D2S6049-12EXT
#D2S6049-24EXT
#D2S6049-12X2
#D2S6065
#D2S6065-12EXT
#D2S6065-24EXT
#D2S6065-12X2
#D3S4049
#D3S4049-12EXT
#D3S4049-24EXT
#D3S4049-12X2
#D3S4065
#D3S4065-12EXT
#D3S4065-24EXT
#D3S4065-12X2
#D3S5049
#D3S5049-12EXT
#D3S5049-24EXT
#D3S5049-12X2
#D3S5065
#D3S5065-12EXT
#D3S5065-24-EXT
#D3S5065-12X2
#D3S6049
#D3S6049-12EXT
#D3S6049-24EXT
#D3S6049-12X2
#D3S6065
#D3S6065-12EXT
#D3S6065-24EXT
#D3S6065-12x2
#D3S7049
#D3S7049-12EXT
#D3S7049-12X2
#D3S7065
#D3S7065-12EXT
#D3S7065-12x2
#D3S8049
#D3S8049-12EXT
#D3S8049-12X2
#D3S8065
#D3S8065-12EXT
#D3S8065-12x2
#D2D2.5049
#D2D3.0049
#D2D3.5049
NOTE: All Deck to Stair rails are available with 12” extension on pool side leg,
24” extension on pool side leg, or 12” extensions on both legs.
Deck to Stair Mounted
2 Bend Handrail
Part# D2S4049
Deck to Stair Mounted
3 Bend Handrail
Part# D3S4049
OM
CUST LS
RAI LE!
LAB
or
AVgAs.I 153-15r5mfs.
See p om rail fo
cust
Stair Side Mounted Rail
Part# D2D3.0049
Check your local
electrical code
requirements for
bonding requirements.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
ADA NOTE: In order to meet the ADA minimum vertical handrail height
requirement, we are modifying our commercial handrails to be 34” off the
deck at the TOP of the rail. In the past, we have indicated the on center measurements. The following is the requirement under Titles II and III:
“Section 505.4 Height. Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above
walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a
consistent height above walking surfaces, stair nosings, and ramp surfaces.”
We are ONLY changing the commercial version of the rails, NOT the residential.
NOTE: Escutcheons sold separately w/SS products; included
with powder coated and thermo plastic coated ladders and rails.
All measurements on center.
Anchors are not included and recommended.
TG - Rev. 7/15
83
RAIL PRODUCTS
DESCRIPTION
HANDRAILS – 2 BEND:
PC
TP
MG
FEATURES:
• 12” and 24” Extensions Available
• 304 SS and 316L
• 1.90” OD
Part # D2S4049
Please refer to the
ADA Note on pg. 83
RAIL PRODUCTS
HANDRAILS – 3 BEND:
PC
TP
FEATURES:
• 12” and 24” Extensions Available
• 304 SS and 316L
• 1.90” OD
MG
Part # D3S4049
Please refer to the
ADA Note on pg. 83
84
TG - Rev. 7/15
CLICK 8
HANDRAILS – SIDE RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
Part # D2D3.0049
RAIL PRODUCTS
NOTE: This product sold as pairs.
Gibralter Style Rails
TG - Rev. 7/15
85
TRADITIONAL GRAB RAILS/SPA RAILS – RAIL DESIGNS:
GRAB RAILS
DESCRIPTION
PART NUMBER
Figure 4 Grab Rail (pair)
Figure 4 Grab Rail (single rail only)
Figure 4 Grab Rail (.065” wall)
NEW Figure 4 Grab Rail (pair)
Gibralter Style Rail (pair)
Gibralter Style Rail (pair)
Includes Anchor & Escutcheons
Ring Style Grab Rail (pair)
Ring Style Grab Rail (pair)
Includes Anchor & Escutcheons
Single Post Grab Rail (pair)
Anchor Set Included
Part
Part
Part
Part
Part
Part
#G3D049
#G3D049-SINGLE
#G3D065
#G3DE049
#G4G049
#G4G049C
Part #G4D049
Part #G4D049C
Figure 4 Grab Rail
Part# G3D049
Part #CT-3049
RAIL PRODUCTS
Gibralter Style Rail
Part# G4G049
Ring Style Grab Rail
Part# G4D049
NEW Figure 4 Grab Rail
Part# G3DE049
Single Post Grab Rail
Part# CT-3049
SPA RAIL
DESCRIPTION
PART NUMBER
Single Post Spa Rail
Part #SPA 1900
without Flange
Part# SPA 1900
OM
CUST LS
RAI LE!
LAB or
AVAsI. 153-155mfs.
g
r
See p om rail fo
cust
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
86
TG - Rev. 7/15
CLICK 8
FIGURE 4 GRAB RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
MG
RAIL PRODUCTS
Part # G3D049 (pair)
Part # G3D049-SINGLE (single rail only)
Part # G3D065 (pair, .065” wall)
ECONOMY FIGURE 4 GRAB RAIL:
PC
TP
MG
FEATURES:
• Economy Figure 4 Grab Rail is 7” Shorter in
Height than Figure 4 Grab Rail
• 304 SS and 316L
• 1.90” OD
Part # G3DE049 (pair)
Part # G3DE049-SINGLE (single)
Part # G3DE065 (pair .065 wall)
TG - Rev. 7/15
87
GIBRALTER STYLE RAIL:
FEATURES:
• 304 SS
• 1.625” OD
PC
TP
Part # G4G049 (pair)
Part # G4G049C
(pair, complete w/anchor & escutcheons)
Part # GA-SET
RAIL PRODUCTS
RING STYLE GRAB RAIL:
FEATURES:
• 304 SS
• 1.625” OD
PC
TP
Part # G4D049 (pair)
Part # G4D049C
(pair, complete w/anchor & escutcheons)
Part # GA-SET
88
TG - Rev. 7/15
CLICK 8
CT-3 GRAB RAIL:
PC
FEATURES:
• CT-3 Rail Uses Channel Anchor that Extends
Out of the Deck
Rail Does NOT Utilize In-Deck Anchors
• 304 SS
• 1.625” OD
Part # CT-3049 (pair, anchor included)
Part # CT-3049single (single rail – for replacement only)
RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated rails.
SINGLE POST SPA RAIL
PC
TP
FEATURES:
• 304 SS and 316L
• 1.90” OD
Part # SPA 1900
TG - Rev. 7/15
89
EXERCISE BARS – RAIL DESIGNS:
EXERCISE BARS
DESCRIPTION
24”
36”
48”
60”
Exercise
Exercise
Exercise
Exercise
OM
CUST LS
RAI LE!
r
ILA3B
55 fo
AVpA
5 -1 ms.
gs. 1
r
o
PART NUMBER
Bar
Bar
Bar
Bar
without
without
without
without
Flanges
Flanges
Flanges
Flanges
Part
Part
Part
Part
(1.900”x.049”wall)
(1.900”x.049”wall)
(1.900”x.049”wall)
(1.900”x.049”wall)
#EB241900
#EB361900
#EB481900
#EB601900
See om rail f
cust
NOTE: Exercise Bars available with flanges and hardware.
*Add FL to end of part # to order with flange and hardware.
See Price Book.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
RAIL PRODUCTS
Exercise Bar without Flange
Part # EB361900
Exercise Bar with Flange
Part # EB361900FL
NOTE: Escutcheons are not included with Exercise Bars without flanges.
90
TG - Rev. 7/15
CLICK 8
EXERCISE BARS – EMBEDDED:
FEATURES:
• 304 SS and 316L
• 1.90” OD Available
• Designed for In-Wall Installation
PC
Part # EB361900 (without flanges)
TP
RAIL PRODUCTS
MG
NOTE: Escutcheons are not included with Exercise Bars without flanges.
EXERCISE BARS – FLANGED:
Part # EB361900FL (with flanges)
FEATURES:
• 304 SS and 316L
• 1.90” OD Available
• Designed for On-Wall Installation
• Comes with SS Mounting Hardware
PC
TP
MG
NOTE: All measurements on center.
TG - Rev. 7/15
91
FILL SPOUTS:
FEATURES:
• Durable & Long Lasting .049” wall Stainless
Steel Construction
• 304 SS
• Available in 3/4”, 1”, and 1-1/2”
• Designed for Stub-Up Installation
• Available in 6 Powder Coated Finishes
PC
Part # FS-3/4 SPOUT
Part # FS-1 SPOUT
Part # FS-1 1/2 SPOUT
RAIL PRODUCTS
Standard Residential
Ladder shown in
powder coat
92
TG - Rev. 7/15
CLICK 8
DESIGNER SERIES RAILS – RAIL DESIGNS:
DESIGNER GRAB RAILS
DESCRIPTION
PART NUMBER
DR-G3D Grab Rail – pair
DR-G3D Grab Rail – single
DR-G3DE Grab Rail – pair
DR-G3DE Grab Rail – single
Part
Part
Part
Part
#DR-G3D065
#DR-G3D065-SINGLE
#DR-G3DE065
#DR-G3DE065-SINGLE
DR-G3D Grab Rail
Part# DR-G3D065-SINGLE
DR-G3DE Grab Rail
Part# DR-G3DE065-SINGLE
DESIGNER DECK TO DECK RETURN STAIR RAIL
PART NUMBER
DR-D3D Deck to Deck Return Stair Rail
Part #DR-D3D50065
Designer Deck to Deck Return Stair Rail
Part# DR-D3D50065
DESIGNER DECK TO DECK STAIR HANDRAIL
DESCRIPTION
PART NUMBER
DR-D2D3 Deck to Deck Stair Handrail – pair
Part #DR-D2D3.0065
Designer Deck to Deck Stair Handrail
Part# DR-D2D3.0065
sold as pair
DESIGNER DECK TO STAIR HANDRAIL
DESCRIPTION
PART NUMBER
DR-D2S Deck to Stair Handrail – 4’ span
Part #DR-D2S4065
Part #DR-D2S5065
Part #DR-D2S6065
Designer Deck to Stair Handrail
Part# DR-D2S6065 shown
sold as pair
DESIGNER LADDERS
DESCRIPTION
Designer
Designer
Designer
Designer
3
3
4
4
Tread
Tread
Tread
Tread
PART NUMBER
Ladder
Ladder
Ladder
Ladder
w/HIP Tread
w/SUT Tread
w/HIP Tread
w/SUT Tread
Part
Part
Part
Part
#DR-L3065P-W
#DR-L3065S
#DR-L4065P-W
#DR-L4065S
Designer Ladder
Part# DR-L3065P-W shown
sold as pair
Form Follows Function...
The Designer Rail design follows
the function of the traditional rail.
THERMO PLASTIC COLORS: White: -TPC-W;
Gray: -TPC-G; Tan: -TPC-T
(add custom color code behind part #
when ordering) NOTE: All thermo plastic
coated rails are encapsulated in plastic coating
and sealed at the ends with plastic caps.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
TG - Rev. 7/15
93
RAIL PRODUCTS
DESCRIPTION
DESIGNER DR-G3D GRAB RAIL:
FEATURES:
• 304 SS and 316L
PC
TP
MG
DR-G3D Grab Rail:
Part # DR-G3D065 (pair)
Part # DR-G3D065-SINGLE (single)
RAIL PRODUCTS
DESIGNER DR-G3DE GRAB RAIL:
PC
FEATURES:
• 304 SS and 316L
TP
MG
DR-G3DE Grab Rail:
Part # DR-G3DE065 (pair)
Part # DR-G3DE065-SINGLE (single)
94
TG - Rev. 7/15
CLICK 8
DESIGNER DECK TO DECK RETURN STAIR RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
RAIL PRODUCTS
DR-D3D Deck to Deck
Return Stair Rail:
Part # DR-D3D50065
DESIGNER DR-D2D3 DECK TO DECK STAIR HANDRAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
DR-D2D3 Deck to Deck
Stair Handrail:
Part # DR-D2D3.0065
TG - Rev. 7/15
95
DESIGNER D2S DECK TO STAIR HANDRAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
D2S Deck to Stair Handrail:
Part # DR-D2S4065 - 4’ span
Part # DR-D2S5065 - 5’ span (shown)
Part # DR-D2S6065 - 6’ span
RAIL PRODUCTS
DESIGNER LADDER:
PC
TP
FEATURES:
• 304 SS and 316L
MG
Designer Ladders:
Part # DR-L3065P-W - 3 Tread Ladder w/HIP Tread (shown)
Part # DR-L3065S - 3 Tread Ladder w/SUT Tread
Part # DR-L4065P-W - 4 Tread Ladder w/HIP Tread
Part # DR-L4065S - 4 Tread Ladder w/SUT Tread
*HIP Treads for Residential Use Only
96
TG - Rev. 7/15
CLICK 8
AFTERMARKET DECK TOP MOUNTED RAILS: OVERVIEW
NEW Deck Top Mounting devised for use in
Lieu of Anchor Sockets.
escutcheon
FEATURES:
• Standard Offering: Pool Grade (304) Alloy
• Optional Upgrade: Marine Grade (316L) Alloy
• Select Styles Available Include Traditional and
Designer Series: Stair Rails, Grab Rails, and
Ladders
• Perfect for Aftermarket Applications
• Includes Escutcheons & Mounting Hardware
DR-D3D50065-FL
flange
drop anchor
mounting
hardware
RAIL PRODUCTS
D4D049-FL
drop anchor
setting tool
RAIL FINISHES AVAILABLE: (please see price list for rail-specific availability)
POWDER COATED: (you must add the custom color code behind part # when ordering)
THERMO PLASTIC COATED: (you must add the custom color code behind part # when ordering)
OPTIONS BELOW HELP PROTECT AGAINST HARSH ENVIRONMENTS:
PC
POWDER COAT FINISH: Baked on powder coat colors protect against harsh pool environments.
TP
THERMO PLASTIC COAT FINISH: Advanced Polymer Coating adds rail protection in harsh pool environments.
MG
MARINE GRADE RAILS: A 316L alloy option for harsh pool environments.
TG - Rev. 7/15
97
AFTERMARKET DECK TOP MOUNTED RAILS - RAIL DESIGNS:
DECK TOP GRAB RAILS
DESCRIPTION
PART NUMBER
Deck
Deck
Deck
Deck
Deck
Deck
Deck
Deck
Part
Part
Part
Part
Part
Part
Part
Part
Top
Top
Top
Top
Top
Top
Top
Top
Grab Rail – pair
Grab Rail – single
Economy Grab Rail – pair
Economy Grab Rail – single
Designer Grab Rail – pair
Designer Grab Rail – single
Designer Economy Grab Rail – pair
Designer Economy Grab Rail – single
#G3D049-FL
#G3D049-FL-SINGLE
#G3DE049-FL
#G3DE049-FL-SINGLE
#DR-G3D065-FL
#DR-G3D065-FL-SINGLE
#DR-G3DE065
#DR-G3DE065-FL-SINGLE
Deck Top Grab Rail
Part# G3D049-FL
Deck Top Economy Grab Rail
Part# G3DE049-FL
NOTE: Designer Rails ONLY Available in 1.90 x .065.
Deck Top Designer Grab Rail
Part# DR-G3D065-FL-SINGLE
DECK TOP DECK TO DECK RETURN STAIR RAILS
RAIL PRODUCTS
DESCRIPTION
PART NUMBER
Deck
Deck
Deck
Deck
Deck
Part
Part
Part
Part
Part
Top
Top
Top
Top
Top
3 Bend Deck to Deck Return Stair Rail
3 Bend Braced Deck to Deck Return Stair Rail
4 Bend Deck to Deck Return Stair Rail
4 Bend Braced Deck to Deck Return Stair Rail
#D3D50049-FL
#D3BD049-FL
#D4D049-FL
#D4BD049-FL
#DR-D3D50065-FL
Deck Top Deck to Deck
3 Bend Stair Rail
Part# D3D50049-FL
4 Bend Stair Rail
Part# D4D049-FL
Part# D4BD049-FL
DECK TOP DECK TO DECK STAIR HANDRAIL
DESCRIPTION
Deck Top Designer Economy
Grab Rail
Part# DR-G3DE065-FL-SINGLE
3 Bend Braced Stair Rail
Part# D3BD049-FL
Deck Top Designer Deck to Deck
Return Stair Rail
Part# DR-D3D50065-FL
Deck Top Designer Deck to Deck
Stair Handrail
Part# DR-D2D3.0065-FL
(sold as pair)
PART NUMBER
Deck Top Designer Deck to Deck Stair Handrail – pair Part #DR-D2D3.0065-FL
DECK TOP LADDERS
DESCRIPTION
PART NUMBER
Deck Top 3 Tread Ladder w/HIP Tread
Deck Top 3 Tread Ladder w/SUT Tread
Deck Top 4 Tread Ladder w/HIP Tread
Deck Top 4 Tread Ladder w/SUT Tread
Deck Top Designer 3 Tread Ladder w/HIP Tread
Deck Top Designer 3 Tread Ladder w/SUT Tread
Deck Top Designer 4 Tread Ladder w/HIP Tread
Deck Top Designer 4 Tread Ladder w/SUT Tread
Part
Part
Part
Part
Part
Part
Part
Part
#L3065P-W-FL
#L3065S-FL
#L4049P-W-FL
#L4049S-FL
#DR-L3065P-W-FL
#DR-L3065S-FL
#DR-L4065P-W-FL
#DR-L4065S-FL
NOTE: HIP (High Impact Plastic) Treads for Residential Use ONLY.
98
TG - Rev. 7/15
Deck Top
3 Tread Ladder
Part #L3049S-FL (shown)
CLICK 8
Deck Top Designer
3 Tread Ladder
Part# DR-L3065P-W-FL (shown)
DECK TOP – 3 BEND:
FEATURES:
• 304 SS and 316L
• 1.90” OD
• Escutcheons & Mounting Hardware Included
PC
TP
MG
Part # D3D50049-FL
(see note)
RAIL PRODUCTS
*NOTE RAIL PLACEMENT:
The forward deck flange (toward pool)
must set back a minimum distance of
2.5” from the vertical pool wall.
DECK TOP – 3 BEND – BRACED:
PC
TP
FEATURES:
• 304 SS and 316L
MG
Part # D3BD049-FL
(see note)
TG - Rev. 7/15
99
DECK TOP – 4 BEND:
FEATURES:
• 304 SS and 316L
• 1.90” OD
PC
TP
MG
Part # D4D049-FL
(see note)
RAIL PRODUCTS
DECK TOP – 4 BEND – BRACED:
PC
TP
MG
FEATURES:
• 304 SS and 316L
• 1.90” OD
Part # D4BD049-FL
(see note)
100
TG - Rev. 7/15
CLICK 8
DECK TOP FIGURE 4:
FEATURES:
• 304 SS and 316L
• 1.90” OD
PC
TP
MG
RAIL PRODUCTS
Part # G3D049-FL (pair)
Part # G3D049-FL-SINGLE (single rail only)
DECK TOP ECONOMY FIGURE 4:
PC
TP
MG
FEATURES:
• Economy Figure 4 Grab Rail is 7” Shorter in
Height than standard Figure 4 Grab Rail
• 304 SS and 316L
• 1.90” OD
Part # G3DE049-FL (pair)
Part # G3DE049-FL-SINGLE (single rail only)
TG - Rev. 7/15
101
DECK TOP LADDER:
FEATURES:
• 304 SS and 316L
• 1.90” OD
PC
TP
MG
Standard - Available in 3 Step and 4 Step
Part # L3049P-W-FL - 3 Step w/HIP Tread
Part # L3049S-FL - 3 Step w/SUT Tread (shown)
Part # L4049P-W-FL - 4 Step w/HIP Tread
Part # L4049S-FL - 4 Step w/SUT Tread
RAIL PRODUCTS
NOTE: HIP (High Impact Plastic) Treads
for Residential Use ONLY.
DESIGNER DECK TOP LADDER:
FEATURES:
• 304 SS and 316L
PC
TP
MG
Designer - Available in 3 Step and 4 Step
Part # DR-L3065P-W-FL - 3 Step w/HIP Tread (shown)
Part # DR-L3065S-FL - 3 Step w/SUT Tread
Part # DR-L4065P-W-FL - 4 Step w/HIP Tread
Part # DR-L4065S-FL - 4 Step w/SUT Tread
NOTE: HIP (High Impact Plastic) Treads for Residential Use ONLY.
102
TG - Rev. 7/15
CLICK 8
DESIGNER DECK TOP GRAB RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
RAIL PRODUCTS
DR-G3D Grab Rail:
Part # DR-G3D065-FL (pair)
Part # DR-G3D065-FL-SINGLE (single rail only)
DESIGNER DECK TOP ECONOMY GRAB RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
Part # DR-G3DE065-FL (pair)
Part # DR-G3DE065-FL-SINGLE (single rail only)
TG - Rev. 7/15
103
DESIGNER DECK TOP DECK TO DECK RETURN STAIR RAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
Part # DR-D3D50065-FL
(see note)
RAIL PRODUCTS
DECK TOP DESIGNER DECK TO DECK STAIR HANDRAIL:
PC
TP
FEATURES:
• 304 SS and 316L
MG
Part # DR-D2D3.0065-FL (pair)
104
TG - Rev. 7/15
CLICK 8
GAMES & LIFESTYLE PRODUCTS
DESCRIPTION
PART NUMBER
Basketball Set - On Deck 12” Offset
Complete B-Ball, SS Legs
Basketball Set - In Deck 12” Offset
Complete B-Ball, SS Legs, Bronze Anchor
Complete B-Ball, SS Legs, Plastic Anchor
Basketball Set - On Deck 18” Offset
Complete B-Ball, SS Legs
Complete B-Ball, SS Legs, Bronze Anchor
Complete B-Ball, SS Legs, Plastic Anchor
Volleyball Set - On Deck
Complete V-Ball, SS Legs
Volleyball Set - In Deck Option #1
Complete V-Ball, SS Legs, Bronze Anchors
Volleyball Set - In Deck Option #2
Complete V-Ball, SS Legs, Plastic Anchors
Part # SPS-BBALL D-C
Part # SPS-BBALL GB-C
Part # SPS-BBALL GP-C
SPS-BBALL D-C
SPS-BBALL GB-C
SPS-BBALL GP-C
SPS-BBAL 18 D-C
SPS-BBAL 18 GBC
SPS-BBAL 18 GPC
WS-V BALL D
WS-VBALL GB-C
WS-VBALL GP-C
Part # SPS-BBAL 18 D-C
Part # SPS-BBAL 18 GBC
Part # SPS-BBAL 18 GPC
GAMES FEATURES:
• Removable Stainless Steel Posts
• Anchor Socket Covers
• Posts Can be Powder Coated or Thermo Plastic
Coated to Coordinate With Custom Pool Rails
• Comes With Ball, Pump, & Needle
• Available for On Deck OR In Deck Installation
Applications
• Bronze OR Plastic Anchors Available
• Available in 316L Marine Grade Option
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3;
Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T
NOTE: On ALL coated rails for games, the bottom 6” of the stainless
steel is NOT coated.
Part # WS-V BALL D
GAMES & LIFESTYLE
SPORTS EQUIPMENT
Part # WS-VBALL GB-C
Part # WS-VBALL GP-C
TG - Rev. 7/15
105
BASKETBALL SET:
FEATURES:
• Removable Stainless Steel Posts (1.90 x .065 SS)
• Tough, Impact Resistant Polycarbonate Backboard
• Posts Can be Powder Coated or Thermo Plastic Coated to
Coordinate With Custom Pool Rails
• Comes With Backboard, Support Legs, Anchors, Rim, Net,
Ball, Pump, & Needle
• Available for On Deck OR In Deck Installation Applications
• 12” or 18” Set Back Available
• Bronze OR Plastic Anchor Jig Available
• Optional Upgrade: 316L Marine Grade SS
Part # SPS-BBALL D-C
Part # SPS-BBALL GB-C
Part # SPS-BBALL GP-C
Part # SPS-BBAL 18 D-C
Part # SPS-BBAL 18 GBC
Part # SPS-BBAL 18 GPC
SPS-B ANC-BRONZE
SPS-B ANC-PLAS
VOLLEYBALL SET:
GAMES & LIFESTYLE
FEATURES:
• Removable Stainless Steel Posts
• Durable 16’ Long x 3’ High Net With Black Twisted
Polyethylene Material & White Vinyl Banding;
NOTE: Ties Will Extend to 22’
• Posts Can be Powder Coated or Thermo Plastic Coated to
Coordinate With Custom Pool Rails
• Comes with Net, Ball, Pump, Needle, Support Legs & Anchors
• Available for On Deck OR In Deck Installation Applications
• Bronze OR Plastic Anchors Available
• Optional Upgrade: 316L Marine Grade
• NEW: Retrofit/Aftermarket Volleyball Set Available – Uses
existing 1.50 umbrella anchors and our 1.50 Adapter*
Part # WS-V BALL D
Part # WS-VBALL GB-C
Part # WS-VBALL GP-C
*Part # PL-V BALL D (Retrofit/Aftermarket)
Left Photo: WS-V ANC-BRONZE
Right Photo: WS-V ANC-PLAS
106
TG - Rev. 7/15
CLICK 8
POOL/SPA TABLE & SEAT FOR
GUNITE NEW CONSTRUCTION
DESCRIPTION
30” Pool/Spa Table
Complete Table, 54” SS Pole, Bronze Anchor
30” Pool/Spa Table w/o Anchor
Complete Table, 54” SS Pole, No Anchor
30” Pool/Spa Table w/Cup Holders
Complete Table, 54” SS Pole, Bronze Anchor
30” Pool/Spa Table w/Cup Holders w/o Anchor
16” Pool/Spa Seat
Complete Seat, 42” SS Pole, Bronze Anchor
16” Pool/Spa Seat w/o Anchor
Complete Seat, 42” SS Pole, No Anchor
6” Bronze Anchor
6” Bronze Anchor w/Cap Included
Part # WS-POOLSEAT-XX-C
PART NUMBER
WS-POOLTABLE-XX-C
WS-PT NO ANC-XX-C
WS-POOLTABLE-CH-XX-C
WS-PT NO ANC-CH-XX-C
WS-POOLSEAT-XX-C
WS-PS NOANC-XX-C
WS-POOL-ANCHOR
PS TABLE & SEAT FEATURES:
• 30” Diameter Table Top with Umbrella Hole
(available with or without 4 cup holders)
• 16” Diameter Seat Top
• 1.90 x .065 316L Support Pole
• 6” Bronze Pool Anchor with Cap Included
(also available without anchor)
• Table Works With Most Outdoor Umbrellas
(Max. 1-5/8”)
• Variety of Earth Tone and Granite Colors Available
• Matching Products: T7 Diving System, BYOS 1& 2,
GRS, Tanning Ledge Tables
Part # WS-POOL-ANCHOR
PS TABLE & SEAT COLORS AVAILABLE:
Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60
GAMES & LIFESTYLE
(replace XX w/custom color code in part # above)
Part # WS-POOLTABLE-XX-C
TG - Rev. 7/15
107
POOL/SPA TABLE & SEAT FOR GUNITE NEW CONSTRUCTION:
POOL/SPA TABLE
Part # WS-POOLTABLE-XX-C
Part # WS-POOLTABLE-CH-XX-C
Part # WS-PT NO ANC-XX-C
Part # WS-PT NO ANC-CH-XX-C
POOL/SPA SEAT
FEATURES:
• 54” Tall 1.90 x .065 316L Support Pole for Table
• 42” Tall 1.90 x .065 316L Support Pole for Seat
• 6” Bronze Pool Anchor with Cap Included
(Max. 1-5/8”)
(replace XX w/custom color code in part #)
Part # WS-POOLSEAT-XX-C
Part # WS-PS NOANC-XX-C
Pool/Spa Table
GAMES & LIFESTYLE
Pool/Spa Seat
108
TG - Rev. 7/15
CLICK 8
TANNING LEDGE TABLES FOR NEW GUNITE CONSTRUCTION:
16” TABLE FEATURES:
• 18” Tall 1.90 x .065 316L Support Pole
• Works With Most Outdoor Umbrellas (Max. 1-5/8”)
• Matching Products: T7 Diving System, BYOS 1& 2, GRS,
Pool/Spa Table & Seat
• For Use with Tanning Ledge up to 12” Deep
Part # WS-16 TABLE-XX-C
Part # WS-16 NOANC-XX-C
TANNING LEDGE TABLES COLORS AVAILABLE:
TANNING LEDGE TABLES FOR NEW GUNITE CONSTRUCTION:
Part # WS-30 TABLE-XX-C (shown)
Part # WS-30 NOANC-XX-C
Part # WS-30 TABLE-CH-XX-C
Part # WS-30 NOANC-CH-XX-C
GAMES & LIFESTYLE
TG - Rev. 7/15
109
TANNING LEDGE TABLES FOR
GUNITE RETROFIT/AFTERMARKET
PART NUMBER
DESCRIPTION
16” Beverage Table
Complete Table, 18” SS Leg, 1.50” Adapter
30” Umbrella Table
30” Umbrella Table w/Cup Holders
1.50” Adapter
Adapter for Use w/Existing 1.50” Anchors
PL-16 BEV TABLE-XX-C
PL-30 UMB TABLE-XX-C
PL-30 UMB TABLE-CH-XX-C
PL-ADAPTER 1.50
TANNING LEDGE TABLE PRODUCTS FEATURES:
• 1.50” Adapter Included for Use with Existing 1.50”
Anchors
• Umbrella Table Works With Most Outdoor Umbrellas
(Max. 1-5/8”)
GRS, Pool/Spa Table & Seat
30” Tanning Ledge Table w/Cup Holders
16” Tanning Ledge Table
IT’S AS EASY
AS 1, 2, 3!
GAMES & LIFESTYLE
There are
...ADD a
THOUSANDS
RETROFIT/
of existing
AFTERMARKET
umbrella
TANNING LEDGE
sleeves... TABLE with our 1.50”
1.
anchor sleeve adapter
in
3 EASY
STEPS!
2.
3.
30” Tanning Ledge Table
110
TG - Rev. 7/15
CLICK 8
Umbrellas and umbrella
anchors not included.
RETROFIT/AFTERMARKET TANNING LEDGE 16” DIAMETER TABLE:
• 1.50” Adapter Included for Use with Existing Plastic 1.50”
Umbrella Sleeves
Part # PL-16 BEV TABLE
RETROFIT/AFTERMARKET TANNING LEDGE 30” DIAMETER TABLE:
GAMES & LIFESTYLE
• 1.50” Adapter Included for Use with Existing Plastic 1.50”
Umbrella Sleeves
Part # PL-30 UMB TABLE (shown)
Part # PL-30 UMB TABLE-CH
TG - Rev. 7/15
111
POOL/SPA TABLE & SEAT FOR
VINYL LINER NEW CONSTRUCTION
DESCRIPTION
30” Pool/Spa Table
Complete Table, 54” SS Pole, Vinyl Liner Anchor
30” Pool/Spa Table w/o Anchor
30” Pool/Spa Table w/Cup Holders
Complete Table, 54” SS Pole, Vinyl Liner Anchor
30” Pool/Spa Table w/Cup Holders w/o Anchor
16” Pool/Spa Seat
Complete Seat, 42” SS Pole, Vinyl Liner Anchor
16” Pool/Spa Seat w/o Anchor
Vinyl Liner Anchor
Part # VL-POOLSEAT
PART NUMBER
VL-POOLTABLE-XX-C
VL-PT NO ANC-XX-C
VL-POOLTABLE-CH-XX-C
VL-PT NO ANC-CH-XX-C
VL-POOLSEAT-XX-C
VL-PS NOANC-XX-C
VL-ANCHOR 1.90
TABLE & SEAT FEATURES:
• 1.90 x .065 316L Support Pole
• 1.90 Vinyl Liner Anchor with Cap Included
(Max. 1-5/8”)
Part # VL-ANCHOR 1.90
GAMES & LIFESTYLE
Part # VL-POOLTABLE
112
TG - Rev. 7/15
CLICK 8
POOL/SPA TABLE & SEAT FOR VINYL LINER NEW CONSTRUCTION:
POOL/SPA TABLE
Part # VL-POOLTABLE-XX-C
Part # VL-POOLTABLE-CH-XX-C
Part # VL-PT NO ANC-XX-C
Part # VL-PT NO ANC-CH-XX-C
POOL/SPA SEAT
FEATURES:
• 54” Tall 1.90 x .065 316L Support Pole for Table
• 42” Tall 1.90 x .065 316L Support Pole for Seat
(Max. 1-5/8”)
(replace XX w/custom color code in part #)
Part # VL-POOLSEAT-XX-C
Part # VL-PS NOANC-XX-C
GAMES & LIFESTYLE
Pool/Spa Table
Pool/Spa Seat
TG - Rev. 7/15
113
16” TANNING LEDGE TABLE FOR VINYL LINER NEW CONSTRUCTION:
Part # VL-16 TABLE-XX-C
Part # VL-16 NOANC-XX-C
30” TANNING LEDGE TABLE FOR VINYL LINER NEW CONSTRUCTION:
GAMES & LIFESTYLE
Part # VL-30 TABLE-XX-C (shown)
Part # VL-30 NOANC-XX-C
Part # VL-30 TABLE-CH-XX-C
Part # VL-30 NOANC-CH-XX-C
114
TG - Rev. 7/15
CLICK 8
ECHOES OF NATURE ACCESSORIES - QUICK REFERENCE
BOULDER SPRINGS PRODUCTS
Water Features
Alta (waterfall only)
Alta (waterfall, pump & plumbing)
Keystone (waterfall only)
Keystone (waterfall, pump & plumbing)
Taos (waterfall only)
Taos (waterfall, pump & plumbing)
Aspen (waterfall only)
Aspen (waterfall, pump & plumbing)
Vail (waterfall only)
Vail (waterfall only)
Rim Rock (waterfall only)
Rim Rock (waterfall, pump & plumbing)
WOK (waterfall w/small pedestal)
WOK (waterfall w/medium pedestal)
Boulder Springs Jump & Splash
Accent Boulders
Accent Boulder 1100
Accent Boulder 1200
Accent Boulder 1300
Accent Boulder 1400
Accent Boulder 1500
Accent Boulder 2200
Accent Boulder 2300
Accent Boulder 2600
Accent Boulder 2650
Boulder Pack 8100 (pair w/4100)
Rim Rock Accent Rock (not pictured)
SIZE DIMENSIONS (Length, Height, Depth)
PART NUMBER
Length = 37”, Height = 15”, Depth = 27”
Fountain: Diameter = 36”, Height = 6”
Short Pedestal: Height = 6”
Fountain: Diameter = 36”, Height = 6”
Medium Pedestal: Height = 15”
#4100
#4100T
#4200
#4200T
#4300
#4300T
#4400
#4400T
#4500
#4500T
#R-ROCK-1-POOL
#R-ROCK-1-POND
#WOK-SPILL-S
(Reference 1200 Boulder & 1300 Boulder)
(Reference 2300, 2600 & 2650 Boulders)
(Reference 1500, 2200 & 2650 Boulders)
#1100
#1200
#1300
#1400
#1500
#2200
#2300
#2600
#2650
#8100
#8200
#8300
#8400
#8500
#R-ROCK-1-ACC
F E AT U R E S :
• Durable, Rugged & Light Weight Polyurea Construction
• Suggested for Pool, Pond or Spa Applications
• Many Designs Molded from Actual Rock Outcroppings
• WOK Products Available in 1 Exclusive WOK Color
ECHOES OF NATURE
Part # 4100
Part # 1100
Part # 4200
Part # 1200
Part # 4300
Part # 1300
Part # 4400
Part # 1400
#WOK-SPILL-M
#BS-SR
NOTE: All sizes
+/- 2”. Please
check website for
most current sizes
and weights.
BOULDER SPRINGS ROCK COLORS =
Light Granite: -22; Sunset Red: -23; Dark Granite: -28;
Rustic Sandstone: -29
WOK ROCK COLOR ONLY = True Copper: -32
Part # 4500
Part # 1500
16
SEE PG. HING
TC
FOR MA BASE!
G
N
I
DIV
Part # WOK-SPILL-S
(shown)
Part # 2200
Part # 2300
Part # BS-SR
Part # R-ROCK-1-POOL
Part # 2600
TG - Rev. 7/15
Part # 2650
115
ECHOES OF NATURE
DESCRIPTION
ECHOES OF NATURE ACCESSORIES - QUICK REFERENCE
EDGESTONE SERIES PRODUCTS
DESCRIPTION
Water Features
Scupper
Planter/Bubbler
Double Bubbler
Unity Waterfall
Trinity Falls
Edgestone Jump & Splash
Accessories
Umbrella Stand
SIZE DIMENSIONS (Length, Height, Depth)
PART NUMBER
#7500
#7525
#7550
#7585
#7600
#7800
#7575
F E AT U R E S :
• Durable, Rugged & Light Weight Polyurea Construction
• Suggested for Pool, Pond or Spa Applications
NOTE: All sizes
+/- 2”. Please
check website for
most current sizes
and weights.
EDGESTONE SERIES ROCK COLORS =
Graystone: -33; Brownstone: -34
Part # 7500
Part # 7525
Part # 7550
Part # 7585
Part # 7600
Part # 7800
ECHOES OF NATURE
&
G SLIDE SE!
N
I
H
C
T
BA
MA
40 FOR CHING DIVING
.
G
P
E
E
T
S
FOR MA
PG. 17
Part # 7575
116
TG - Rev. 7/15
CLICK 8
PAVER KIT INFO – SELECTED DIVING PRODUCTS
When installing an Inter-Fab diving board and base set up using a paver kit, you must ensure that all standard
requirements for a diving board and base installation are met. The diving board and base set up must be compatible
with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met.
Figure 1 illustrates the standard minimum concrete pad recommended for all Inter-Fab diving board and base
set ups, which is 4’ wide x 8’ long x 6” deep.
Refer to Figure 3 to determine how much of the jig needs to be exposed above the final deck surface. You will
need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.)
for your individual installation.
Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically
attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
Recommended Minimum
Concrete Area for Diving Bases
– PLAN VIEW –
Example of a Paver Jig in Relationship to Concrete Pad
– SIDE VIEW –
HEIGHT ABOVE FINAL
DECK SURFACE
See Figure 3 Below
48” (4’)
96” (8’)
The minimum
concrete depth
shall be 6” for
the diving base
concrete pad.
3”
max.
PAVERS
Layer of
setting
material
to secure
pavers to
concrete.
CONCRETE
Pool Edge
CONCRETE
Minimum jig depth is either 3.5” or
4.5”. See Figure 3.
SOIL
Drawing Not To Scale
Fig. 1
INTER-FAB
DIVING BASE
LA MESA BASE / LOS ARCOS BASE
– WITH 8’ JIG
– WITH 10’ JIG
DURO-SPRING BASE
TECHNI-SPRING STEEL / EDGE BASE
TECHNI-SPRING FIBERGLASS BASE
BAJA BASE
– WITH 8’ JIG
CITY BASE
T7-N BASE (3 BOLT JIG)
6” min.
DIVING BASE JIG
Fig. 2
MIN. JIG PAVER JIG
DEPTH PART NUMBER
3.5”
3.5”
3.5”
4.5”
4.5”
4.5”
4.5”
4.5”
3.5”
4.5”
LM-J6 PAVER
LM-J8 PAVER
LM-J10 PAVER
DS-J PAVER
TS-EDGE-J PAVER
TSF-J PAVER
BA-J6 PAVER
BA-J8 PAVER
CITY-J6 PAVER
T7-NJIG PAVER
PAVER JIG
BOLTS
1/2” X 8” Carriage SS
5/8” X 10” Hex Head SS
HEIGHT ABOVE
FINAL DECK SURFACE
1.5”
1.5”
1.5”
1.5”
1.5”
3.5”
1.5”
1.5”
1.5”
2.0”
Fig. 3
TG - Rev. 7/15
117
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figure 2 shows an example side view of a paver jig used in a paver installation. Pavers can be a maximum
of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar
or thinset for example) that is no thicker than 3/8”.
INTENDED USE INSTRUCTIONS - DIVING PRODUCTS
Inter-Fab diving boards (including spring boards, jump boards and starting platforms) and stands shall be installed
only by a professional swimming pool contractor or with the direct supervision of a licensed professional, engineer
or architect. Diving boards may be installed only on residential inground swimming pools properly designed
for their use.
Diving boards that are improperly installed can be very dangerous to the user resulting in possible serious head
and/or spinal column injury, including the paralysis or death of the user.
It is very important that Inter-Fab diving boards and stands be installed only on Type 1 or greater pools build
in strict accordance with the American National Standard for Residential Inground Swimming Pools
(ANSI/APSP/ICC-5 2011) and in accordance with the included INTER-FAB RESIDENTIAL POOL SPECIFICATIONS
TABLE 2.
In addition to the above standard and referenced table, the installation instructions provided by Inter-Fab, Inc.
must be diligently followed.
It is also important that any and all warnings provided with the diving board be strictly adhered to and posted
in a conspicuous location. If not provided or they are misplaced, please purchase warning signs from your pool
contractor or professional pool supply store and post them in a location that the users of the diving board can
clearly see.
ONLY ONE PERSON ON THE DIVING BOARD AT ONE TIME.
REFER TO THE POOL TYPE APPLICATIONS AND MAXIMUM WEIGHT
LIMIT PROVIDED IN THE CORRESPONDING INSTALLATION MANUAL.
Plan Your Dive
PLAN YOUR DIVE, STEER UP
Back Arched
Arms Extended
Head and Hands Up
Hold Diving Form
Steer up for a safe dive.
DIVING TIPS: Even the safest equipment must be used properly. Inter-Fab promotes safe diving
by offering these tips on the proper use of your diving board: always dive into water that meets
depth requirements, with arms extended; be aware of the bottom and the walls of the pool; avoid
collisions with pool toys and floats; and instruct your pool users to always “steer up”. When you
begin your dive you must get ready to steer up. As you enter the water, your arms must be
extended over your head, hands flat aiming up. Hold your head and arch your back.
118
TG - Rev. 7/15
to view our products online
CLICK 8
(WOOD CORE BOARDS) :
HOLE DRILL PATTERNS
HOLE PATTERNS FOR WOOD CORE BOARDS:
• 2 Hole Drill Pattern - available on
Duro-Beam 6’, 8’ & 10’
Techni-Beam 6’, 8’, 10’ & 12’
Olympian 6’, 8’ & 10’
Commercial 10’, 12’, 14’ & 16’
Duro-Spring 6’ & 8’
Baja Jump Board 6’ & 8’
• Custom Drill Pattern Available
TG - Rev. 7/15
119
DIVING BOARD CUSTOM DRILL
PATTERN DIMENSION FORM
Please provide the necessary dimensions needed to make the requested custom
drill pattern. Custom drilled boards are non-returnable and carry the same 3 year
warranty as Inter-Fab’s standard products.
Pool Professional: Fax this to your wholesale distributor.
Wholesale Distribution Only: Fax to Inter-Fab, Inc. Diving Board Department.
PLEASE CHECK REQUESTED HOLE PATTERN: _____2 Hole Board** _____3 Hole Board _____4 Hole Board
________ A = Length of Board
________ B = Measurement of Front Holes on Center
________ C = Measurement of Back Holes on Center
________ D = Measurement of Back Holes to Back End of Board
________ F = Measurement Between Back Holes and Front Holes on Center
**For a Custom 2 Hole Board - you will need to provide measurements A, C and D only.
F
3 HOLE BOARD
C
A
D
4 HOLE BOARD
B
Customer Signature_________________________________________________
Date___________________________
Inter-Fab Inc. 3050 S. Alvernon Way • Tucson, AZ 85713 • 800.737.5386 • 520.790.7127 FAX
120
TG - Rev. 7/15
CLICK 8
CURRENT DIVING BOARDS
Model #
A
B
C
D
F
DIA.
70.50”
70.50”
94.50”
118.50”
142.50”
17.25”
17.25”
17.25”
17.25”
17.25”
10.00”
12.00”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
4.00”
4.00”
30.00”
30.00”
40.00”
52.00”
62.00”
19/32”
19/32”
19/32”
19/32”
19/32”
118.50”
142.50”
166.50”
190.50”
96.00”
120.00”
144.00”
168.00”
192.00”
17.25”
17.25”
19.25”
19.25”
18.00”
18.00”
18.00”
20.00”
18.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
52.00”
62.00”
74.00”
86.00”
40.00”
52.00”
62.00”
74.00”
86.00”
19/32”
19/32”
19/32”
19/32”
19/32”
19/32”
19/32”
19/32”
19/32”
Residential Pool Boards
6’ Frontier II
6’ Fibre-Dive & Glas-Hide
Public Pool Boards
10’ Commercial
12’ Commercial
14’ Commercial & Eureka
16’ Commercial & Eureka
8’ Aluminum
10’ Aluminum
12’ Aluminum
14’ Aluminum
16’ Aluminum
OBSOLETE DIVING BOARDS
Model #
A
B
C
D
AB-6F
AB-8
AB-10
AB-12
ABO-XII
ABO-XIV
ABO-XVI
6’
8’
10’
12’
12’
14’
16’
16.00”
18.00”
18.00”
18.00”
20.00”
20.00”
20.00”
10.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
3.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
TG - Rev. 7/15
121
OTHER MANUFACTURER’S
TWO-HOLE DIVING BOARD DIMENSIONS
THREE-HOLE DIVING BOARD DIMENSIONS
CURRENT JUMP BOARDS
Model #
A
B
C
D
F
DIA.
6’ Anthony
8’ Anthony
6’ Frontier II
8’ Frontier II
70.50”
94.50”
70.50”
94.50”
17.25”
17.25”
17.25”
17.25”
12.00”
12.00”
4.50”
4.50”
3.25”
3.25”
8.00”
14.00”
20.50”
30.50”
30.00”
36.00”
19/32”
19/32”
19/32”
19/32”
A
B
C
D
F
DIA.
70.50”
70.50”
94.50”
4.5’
6’
8’
4’
6’
8’
4’
6’
8’
4’
6’
8’
6’
8’
6’
8’
6’
8’
6’
8’
17.25”
17.25”
17.25”
16.00”
16.00”
18.00”
16.00”
16.00”
18.00”
16.00”
16.00”
18.00”
16.00”
16.00”
18.00”
16.00”
18.00”
16.00”
18.00”
16.00”
18.00”
16.00”
18.00”
12.00”
12.00”
12.00”
4.50”
4.50”
4.50”
4.50”
4.50”
4.50”
10.00”
10.00”
10.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
3.50”
8.00”
14.50”
4.50”
8.00”
14.50”
3.00”
4.00”
4.00”
4.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
6.00”
6.00”
15.00”
18.00”
30.00”
27.00”
30.00”
36.00”
16.00”
30.00”
36.00”
16.00”
30.00”
36.00”
16.00”
15.00”
29.50”
15.00”
29.50”
15.00”
29.50”
15.00”
29.50”
20.50”
30.50”
19/32”
19/32”
19/32”
OBSOLETE JUMP BOARDS
Model #
6’ Pioneer
6’ Frontier
8’ Frontier
ASB-40-3-1
ASB-60-3-1
ASB-80-3-1
ACB-4
ACB-6
ACB-8
ACB-50M-4
ACB-50M-6
ACB-50M-8
KKJ-40/50M-4
KKJ-40/50M-6
KKJ-50M-8
Marine 6’
Marine 8’
6’ Continental Single Spring
8’ Continental Single Spring
6’ DBS Single Spring
8’ DBS Single Spring
6’ Anthony Single Spring
8’ Anthony Single Spring
122
TG - Rev. 7/15
CLICK 8
CURRENT JUMP BOARDS
Model #
6’ Baja
8’ Baja
A
B
C
D
E
F
DIA.
70.50”
94.50”
17.25”
17.25”
12.00”
12.00”
12.00”
12.00”
7.00”
7.00”
15.00”
26.00”
7/16”
7/16”
A
B
C
D
E
F
DIA.
46.50”
70.50”
94.50”
94.50”
4’
6’
8’
6’
8’
6’
8’
6’
8’
17.25”
17.25”
17.25”
17.25”
16.00”
16.00”
18.00”
16.00”
18.00”
16.00”
18.00”
18.00”
18.00”
12.00”
12.00”
12.00”
12.00”
4.50”
4.50”
4.50”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
12.00”
20.00”
10.00”
3.50”
8.00”
12.00”
6.00”
6.00”
6.00”
6.00”
8.00”
12.00”
7.00”
12.00”
12.00”
12.00”
4.50”
4.50”
4.50”
10.50”
10.50”
10.50”
10.50”
12.00”
12.00”
7.00”
30.50”
30.50”
20.00”
27.00”
30.00”
36.00”
24.00”
36.00”
24.00”
36.00”
30.00”
36.00”
7/16”
19/32”
19/32”
19/32”
OBSOLETE JUMP BOARDS
Model #
4’ Baja
6’ Space Maker
8’ Space Maker
Gazelle
ASB-40-3
ASB-60-3
ASB-80-3-1
6’ DBS Double Spring
8’ DBS Double Spring
6’ Swimline Double Spring
8’ Swimline Double Spring
6’ Old Style Double Spring
8’ Old Style Double Spring
TG - Rev. 7/15
123
FOUR-HOLE DIVING BOARD DIMENSIONS
OTHER MANUFACTURER’S JIG INFORMATION
THREE-BOLT
Jig Type
6’ Flyte Deck
8’ Flyte Deck
10’ Flyte Deck
New 8’ Flyte Deck
6’ & 8’ Frontier II Spring
** 4’ Cobra Coil
** 6’ Cobra Coil
** 8’ Cobra Coil
** 4’ Aqua Coil
Jig Part #
A
B
BOLT
71-209-700
71-209-702
71-209-703
71-209-704
69-209-227
67-521-10
67-521-10
67-521-10
02-946-11
6.50”
6.50”
6.50”
6.50”
3.25”
18.00”
18.00”
18.00”
4.50”
14.00”
22.00”
31.00”
24.00”
6.00”
16.00”
30.00”
36.00”
16.00”
1/2” x 6” Carriage
** OBSOLETE JIG
FOUR-BOLT
Jig Type
Jig Part #
A
B
BOLT
69-209-006
69-209-007
69-209-229
69-209-224
69-209-225
69-209-226
67-971-10
67-971-11
12.00”
14.00”
6.00”
5.00”
5.00”
6.00”
8.00”
15.00”
12.00”
14.00”
12.00”
6.00”
12.00”
26.50”
12.00”
15.00”
606/608 Steel
606-F
** 6’ x 8” Frontier II Steel Pedestal
** 6’ Frontier II Fiberglass
8’ Frontier II Fiberglass
** 10’ Frontier II Fiberglass
** AJ-6’ & AJ-8’ CPB or DPB
** AJ6’-FB
** OBSOLETE JIG
FIVE-BOLT
Jig Type
Jig Part #
A
B
C
BOLT
6’ Chevron
8’ Chevron
10’ Chevron
71-209-726
71-209-728
71-209-730
4.00”
4.00”
4.00”
5.00”
5.00”
5.00”
14.00”
22.00”
27.00”
124
TG - Rev. 7/15
CLICK 8
OTHER MANUFACTURER’S JIG INFORMATION
Jig Type
** 4’ Baja
6’ Baja
8’ Baja
Steel Meter
** 6’ Frontier
** 6’ Pioneer
** Frontier & Pioneer
Jig Part #
A
B
C
D
E
BOLT
69-209-698
69-209-699
69-209-700
71-209-541
69-209-676
6.50”
6.50”
6.50”
4.00”
6.50”
6.50”
6.50”
6.50”
6.50”
6.50”
6.50”
6.50”
8.00”
6.50”
8.50”
8.50”
8.50”
10.00”
6.50”
6.50”
6.50”
6.50”
6.50”
6.50”
3.00”
6.50”
6.50”
6.50”
9.00”
16.75”
27.25”
17.00”
17.50”
15.50”
29.50”
1/2” x 5-1/2” Carriage
69-209-678
** OBSOLETE JIG
FIVE-BOLT
Jig Type
KKJ-4OM-4
Jig Part #
A
B
C
BOLT
67-550-11
6.50”
6.50”
7.50”
SIX-BOLT
Jig Type
** ADFC-50M-8F
** ADFC-50-10F
** ADFC-66M-1012F
** ADC-50M-8
** ADC-50M-810
** ADC-75M-1012
** ADC-100M-1012
Jig Part #
A
B
C
D
BOLT
02-970-11
02-970-11
02-970-11
02-971-10
02-971-10
02-971-10
02-971-10
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
15.50”
15.50”
15.50”
15.50”
15.50”
15.50”
15.50”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
** OBSOLETE JIG
TG - Rev. 7/15
125
SIX-BOLT
MINIMUM DIVING WATER ENVELOPE:
NOTE: DRAWINGS ARE NOT TO SCALE.
F
G
DIVING EQUIPMENT
H
J
TIP OF BOARD
ABOVE POINT A
N
DIVING EQUIPMENT
M
K
L
TABLE 1 - MINIMUM WATER ENVELOPE (ANSI/APSP/ICC-5 2011)
POOL
TYPE
MINIMUM DEPTHS
AT POINT
MINIMUM WIDTHS
AT POINT
A
B
C
6’-0”
7’-6”
5’-0”
A
B
2’-9”
10’-0” 12’-0” 10’-0”
8’-0”
1’-6”
7’-0”
7’-6”
II
6’-0”
7’-6”
5’-0”
2’-9”
12’-0” 15’-0” 12’-0”
8’-0”
1’-6”
7’-0”
III
6’-10”
8’-0”
5’-0”
2’-9”
12’-0” 15’-0” 12’-0”
8’-0”
2’-0”
7’-6”
IV
7’-8”
8’-6”
5’-0”
2’-9”
15’-0” 18’-0” 15’-0”
9’-0”
2’-6”
V
8’-6”
9’-0”
5’-0”
2’-9”
15’-0” 18’-0” 15’-0”
9’-0”
3’-0”
DIVING
0
I
D
C
MINIMUM LENGTHS
BETWEEN POINTS
D
WA+/-3”
EQUIPMENT
AB
BC
CD*
DE
WE
VARIES
6’-0”
28’-9”
7’-6”
VARIES
6’-0”
28’-9”
9’-0”
VARIES
6’-0”
31’-3”
8’-0”
10’-6”
VARIES
6’-0”
33’-9”
9’-0”
12’-0”
VARIES
6’-0”
36’-9”
PROHIBITED
NOTES:
TABLE 2 - INTER-FAB RESIDENTIAL POOL MINIMUM SPECIFICATIONS
POOL
TYPE
MAX. DIVING
BOARD LENGTH
MAX. HEIGHT
OVER WATER AT
POINT A
DBL**
HOW**
CROSS SECTIONAL
DIMENSIONS AT
POINT A
F
DIVING
0
G
N
MIN. HEAD
ROOM ABOVE
DIVING
SURFACES
CROSS SECTIONAL DIMENSIONS AT POINT B
H
J
EQUIPMENT
K
L
M
PROHIBITED
I
6’ DB/6’ JB/7’ T7
20”
2’-9”
5’-0”
4’-0”
7’-2.5”
7’-6”
6’-0”
3’-9”
2’-1.5”
12’
II
8’ DB/6’ JB/7’ T7
20”
2’-9”
3’-10”
4’-2”
7’-2.5”
7’-6”
6’-8”
3’-9”
2’-1.5”
12’
III
10’ DB/8’ JB/7’ T7
26”
2’-9”
4’-4.75”
4’-4.5”
7’-5.5”
8’-0”
6’-7”
3’-11.5”
1’-7.5”
13’
IV
10’ DB/8’ JB/7’ T7
30”
2’-9”
5’-10.5”
3’-10”
7’-8”
8’-6”
8’-3”
5’-7”
2’-7”
13’
V
12’ DB/8’ JB/7’ T7
40”
2’-9”
6’-2”
3’-11.5”
7’-9.5”
9’-0”
8’-2.5”
5’-9”
2’-7”
14’
*Min. length between points CD may vary based upon water depth at point D and the slope between points C & D
ABBREVIATIONS: **DBL=Diving Board Length; DB=Diving Board; JB=Jump Board; **HOW=Height Over Water
126
TG - Rev. 7/15
CLICK 8
SUPPORT INFORMATION:
ARTICLE 5 – POOL DIMENSIONS AND TOLERANCES
Extracted from ANSI/APSP/ICC-5 2011, American National Standard for Residential Inground Swimming Pools
To obtain complete copies of the
ANSI/APSP/ICC-5 2011
Standard for Residential Inground Pools
contact:
The Association of Pool & Spa
Professionals (APSP)
2111 Eisenhower Ave.
Alexandria, VA 22314
(703) 838-0083
or visit: APSP.org
TG - Rev. 7/15
127
128
TG - Rev. 7/15
CLICK 8
TG - Rev. 7/15
129
130
TG - Rev. 7/15
CLICK 8
ZOOMERANG™
WATER SAFETY ENVELOPE:
A minimum water depth of three feet (3') under the exit of the
slide which increases to a depth of three feet six inches (3'6")
at point A which is located four feet six inches (4'6") from the
back wall of the pool. A minimum depth of three feet six inches
(3'6") must be maintained at a distance of three feet six inches
(3'6”) along the centerline of the slide from point A. The above
described water depth profile shall extend a minimum of three
feet (3') on either side of the centerline of the slide.
(See Diagrams A, B & C)
6'
2'6"
DIAGRAM B
(NOT TO SCALE)
Minimum Slide
Clearance Area
DIAGRAM C
(NOT TO SCALE)
Minimum Water Safety Envelope
Water Level
3'6"
20" Max
Point A
3'6”
8'
Level Deck
3'
3'6"
4'6"
ALL SLIDES SHOULD
BE BONDED
Check your local electrical
code requirements.
TG - Rev. 7/15
131
"
4'6
WATER SAFETY
ENVELOPE
8'
C/L
3'
EN
TE
R
20" Max
C
8'
(NOT TO SCALE)
3'
3'6"
3'
6'
DIAGRAM A
WHITE WATER™, WILD RIDE™, X-STREAM 2™, CITY 2™ SLIDE
slide which increases to a depth of four feet (4') at point A
which is located four feet six inches (4'6") from the back wall
of the pool. A minimum depth of four feet (4') must be maintained
at a distance of nine feet (9') along the centerline of the slide
from point A. The above described water depth profile shall
extend a minimum of three feet three inches (3'3") on either
side of the centerline of the slide.
C/L
4'6
"
3'
EN
TE
R
20" Max
13
'6"
C
13'6"
(NOT TO SCALE)
3'3"
4'
3'3"
6'6"
DIAGRAM A
6'6"
2'6"
WATER SAFETY
ENVELOPE
DIAGRAM B
(NOT TO SCALE)
Minimum Slide
Clearance Area
DIAGRAM C
(NOT TO SCALE)
20" Max
Water Level
4'
Point A
9'
132
TG - Rev. 7/15
15˚
13'6"
Level Deck
3'
4'
4'6"
ALL SLIDES SHOULD
BE BONDED
code requirements.
CLICK 8
G-FORCE 2™ AND ADRENALINE™ SLIDES
DIAGRAM A
slide which increases to a depth of four feet (4'6") at point A
of the pool. A minimum depth of four feet (4'6") must be
maintained at a distance of nine feet (9') along the centerline
of the slide from point A. The above described water depth
profile shall extend a minimum of three feet three inches (3'3")
on either side of the centerline of the slide.
(NOT TO SCALE)
DIAGRAM B
(NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C
(NOT TO SCALE)
ALL SLIDES SHOULD
BE BONDED
code requirements.
TG - Rev. 7/15
133
BYOS 1™ AND BYOS 2™ SLIDES
DIAGRAM A
(NOT TO SCALE)
20” Max
4’
4’
6”
3’
3'3"
13'6"
4’
C/L
WATER SAFETY
ENVELOPE
13
’6
”
3'3"
6'6"
OR
6’6”
2'6"
DIAGRAM B
(NOT TO SCALE)
Minimum Slide
Clearance Area
DIAGRAM C
(NOT TO SCALE)
20" Max
Water Level
4'
Point A
9'
134
TG - Rev. 7/15
13'6"
3'
4'
4'6"
ALL SLIDES SHOULD
BE BONDED
code requirements.
CLICK 8
7’, 10’ AND 15’ GARDEN RIDE SLIDES
DIAGRAM A
(NOT TO SCALE)
DIAGRAM B
(NOT TO SCALE)
Minimum Slide
Clearance Area
DIAGRAM C
(NOT TO SCALE)
ALL SLIDES SHOULD
BE BONDED
code requirements.
TG - Rev. 7/15
135
PAVER KIT INFO – ZOOMERANG SLIDE
When installing an Inter-Fab Zoomerang™ slide using a paver kit, you must ensure that all standard installation
requirements are met. The slide must be compatible with the type of pool on the intended installation and all
ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual.
Figure 1 illustrates an example of the minimum concrete pads recommended for the Zoomerang™ slide.
Specific slide position and concrete pad orientations may vary. Make sure to allow for water stub up location
near the ladder section on the Zoomerang™ slide when pouring the concrete pad for the ladder section. In
order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars
will be located.
Figure 2 shows a side view illustration of the Zoomerang™ slide foot pedestal and wedge anchors used in a
paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”.
For the ladder attachment, 1” of each 3/8” x 7” wedge anchor (4 ea.) needs to be exposed above the final
deck surface. The 3/8” wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above
the final deck surface. For the foot pedestal, 1-1/2” of each 3/8” x 7” wedge anchor (3 ea.) needs to be
exposed above the final deck surface. The 3/8” x 7” wedge anchors must be drilled to a depth of 5-1/2” with
1-1/2” of the bolt left remaining above the final deck surface. The 3/8” x 7” wedge anchors (7 ea.) replace
the 3/8” x 2-3/4” wedge anchors (4) from hardware kit #1 and the 3/8” x 2-3/4” wedge anchors (3) from
hardware kit #2. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting
material (3/8” MAX.) for your individual installation.
You will need a 3/8” masonry bit for the Zoomerang™ slide.
Minimum Concrete Pads – Zoomerang™ Slide
(Plan View – NOT to Scale)
Example of Slide Pedestal on Concrete Pad (Side View)
HEIGHT OF WEDGE
ANCHOR ABOVE
FINAL DECK
SURFACE
2 concrete pads are needed:
(1) 12” wide x 32” long x 12” deep
Center feet on pads
3”
max.
PAVERS
Layer of setting
material to
secure pavers
to concrete.
Pool Edge
5” min.
from edge
TG - Rev. 7/15
12” min.
24” min.
Drawing Is
NOT To Scale
CONCRETE
Fig. 1
136
WEDGE
ANCHORS
Fig. 2
CLICK 8
PAVER KIT INFO – CITY 2 SLIDE
When installing an Inter-Fab City 2™ slide using a paver kit, you must ensure that all standard installation
requirements are met. The slide must be compatible with the type of pool on the intended installation and all
ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual.
Figure 2 shows a side view illustration of the City 2™ slide foot deck anchor and wedge anchors used in a
paver installation. NOTE: 4 ea. CITY-DECK ANCHOR are also required (not included with slide
or paver kit) to complete the City 2™ paver installation. Pavers can be a maximum of 3” thick.
Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset
for example) that is no thicker than 3/8”.
1” of each 3/8” x 7” wedge anchor (18 ea.) needs to be exposed above the final deck surface. The 3/8”
wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above the final deck surface.
The 3/8” x 7” wedge anchors (16 ea.) replace the 5/16” lag bolts and lag shields (16 ea.) included with the
required CITY-DECK ANCHOR parts (4 ea.), one set per leg. See Figure 3. The remaining 3/8” x 7” wedge
anchors (2 ea.) are used (1 per side) to attach the ladder bottom to the concrete pad and replace the 1/4” x 2-1/4”
wedge anchors (4 ea.) from hardware kit CS-101-SS.
The ladder bottom must have the forward 1/4” hole on each side (toward slide) drilled to 1/2” to accommodate
the 3/8” x 7” wedge anchor. The rear 1/4” holes on the ladder bottom are not used with the paver installation.
See Figure 4. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting
material (3/8” MAX.) for your individual installation.
You will need a 3/8” masonry bit and a 1/2” regular bit for the City 2™ slide.
Minimum Concrete Pads – CITY 2™ Slide
Example of Deck Anchor on Concrete Pad (Side View)
HEIGHT OF WEDGE
ANCHOR ABOVE
FINAL DECK
SURFACE
DECK ANCHOR
Center feet on pads
3”
max.
PAVERS
Layer of setting
material to
secure pavers
to concrete.
Pool Edge
5” min.
from edge
Drawing Is
NOT To Scale
Fig. 1
WEDGE
ANCHORS
12” min.
16” min.
CONCRETE
Fig. 2
TG - Rev. 7/15
137
Figure 1 illustrates an example of the minimum concrete pads recommended for the City 2™ slide. Specific
slide position and concrete pad orientations may vary. Make sure to allow for water stub up location near the
ladder section of the City 2™ slide when pouring the concrete pad for the ladder section. In order to ensure proper
placement, you will need to set the slide up first to determine where the concrete pillars will be located.
PAVER KIT INFO – CITY 2 SLIDE – CONTINUED
You will need a 3/8” masonry bit and a 1/2” regular bit for the City 2™ slide.
Fig. 3
Fig. 4
When installing a City 2™ slide using a paver kit, disregard the lag shield instructions that are included with
the CITY-DECK ANCHOR. See Figure 5.
Fig. 5
138
TG - Rev. 7/15
CLICK 8
PAVER KIT INFO – WHITE WATER & WILD RIDE SLIDES
When installing an Inter-Fab White Water™ or Wild Ride™ slide using a paver kit, you must ensure that all
standard installation requirements are met. The slide must be compatible with the type of pool on the intended
installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual. NOTE: This
information replaces the information provided on page 10 of the White Water™/Wild Ride™ installation manual.
Figure 2 shows a side view illustration of the White Water™ or Wild Ride™ slide foot deck anchor and wedge
anchors used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically
attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker
than 3/8”.
1” of each 3/8” x 7” wedge anchor (14 ea.) needs to be exposed above the final deck surface. The 3/8”
wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above the final deck surface.
The 3/8” x 7” wedge anchors (14 ea.) replace the 3/8” x 2-3/4” wedge anchors (2 ea.) from hardware kit
#SH-108 and the 3/8” x 2-3/4” wedge anchors (12 ea.) from hardware kit #SH-106. You will need to factor
in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual
installation.
You will need a 3/8” masonry bit for the White Water™ or Wild Ride™ slide.
Minimum Concrete Pads – WWS & WRS
Example of Deck Anchor on Concrete Pad (Side View)
HEIGHT OF WEDGE
ANCHOR ABOVE
FINAL DECK
SURFACE
Center feet on pads
3”
max.
PAVERS
Layer of setting
material to
secure pavers
to concrete.
Pool Edge
5” min.
from edge
Drawing Is
NOT To Scale
Fig. 1
WEDGE
ANCHORS
12” min.
16” min.
CONCRETE
Fig. 2
TG - Rev. 7/15
139
Figure 1 illustrates an example of the minimum concrete pads recommended for the White Water™ and Wild
Ride™ slides. Specific slide position and concrete pad orientations may vary. Make sure to allow for water
stub up location near the ladder section of the White Water™ or Wild Ride™ slide when pouring the concrete
pad for the ladder section. In order to ensure proper placement, you will need to set the slide up first to determine
where the concrete pillars will be located.
PAVER KIT INFO – X-STREAM 2 & G-FORCE 2 SLIDES
When installing an Inter-Fab X-Stream™ 2 or G-Force™ 2 slide using a paver kit, you must ensure that all standard installation
requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5
2011 requirements must be met. Refer to installation manual.
Figure 1 illustrates an example of the minimum concrete pads recommended for the X-Stream™ 2 slide. Figure 2 illustrates
the two concrete pads needed for the G-Force™ 2 slide. Specific slide positions and concrete pad orientations may vary. Make
sure to allow for water stub up location near the ladder foot on both the X-Stream™ 2 and G-Force™ 2 slides when pouring
the concrete pad for the ladder foot. In order to ensure proper placement, you will need to set the slide up first to determine
where the concrete pillars will be located.
Figure 3 shows an example side view of a slide foot and an wedge anchor used in a paver installation. Pavers can be a
maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar
or thinset for example) that is no thicker than 3/8”.
1” of each 3/8” wedge anchor needs to be exposed above the final deck surface. You will need to factor in the thickness
of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. For the 1/2”
wedge anchors, you will leave 1-1/4” exposed above final deck surface.
You will need a 3/8” masonry bit for the X-Stream™ 2 slide and both a 3/8” masonry bit AND a 1/2” masonry bit for the
G-Force™ 2 slide.
Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching
to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
Minimum Concrete Pads: X-STREAM™ 2 Slide
Minimum Concrete Pads: G-FORCE™ 2 Slide
You may
rotate the
square pads
as needed.
24” wide x 24” long x 24” deep
Center each foot on each pad.
1) 24” wide x 24” long x 24” deep
2) 24” wide x 40” long x 18” deep
Center feet on pads.
1 concrete pad: 31” long
x 27” wide x 27” deep
Fig. 1
Fig. 2
Example of Slide Foot on Concrete Pad (Side View)
HEIGHT OF WEDGE
ANCHOR ABOVE
FINAL DECK
SURFACE
X-STREAM™ 2 NOTES:
• All X-Stream 2™ wedge anchors (13 ea.) are
3/8” x 7”.
G-FORCE™ 2 NOTES:
3”
max.
PAVERS
Layer of setting
material to
secure pavers
to concrete.
5” min.
from edge
Drawing Is
NOT To Scale
WEDGE
ANCHORS
24” min.
• Two G-Force™ 2 feet use 3/8” x 7” wedge
anchors (8 ea.) and the center helix foot with
the steel center post uses the larger 1/2” x 7”
wedge anchors.
• The 3/8” wedge anchors must be drilled to a
depth of 6” with 1” of the bolt above the final
deck surface.
• The 1/2” wedge anchors must be drilled to a
depth of 5-3/4” with 1-1/4” of the bolt above
the final deck surface.
24” min.
CONCRETE
Fig. 3
140
TG - Rev. 7/15
CLICK 8
PAVER KIT INFO – ADRENALINE SLIDE
When installing an Inter-Fab Adrenaline™ slide using a paver kit, you must ensure that all standard installation requirements
are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011
requirements must be met. Refer to installation manual.
Figure 1 illustrates an example of the minimum concrete pads recommended for the Adrenaline™ slide. Specific slide positions
and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder foot on the
Adrenaline™ slide when pouring the concrete pad for the ladder foot. In order to ensure proper placement, you will need
to set the slide up first to determine where the concrete pillars will be located.
1-1/4” of each 3/8” wedge anchor needs to be exposed above the final deck surface for the round pedestal and 1-3/4”
for the step pedestal and exit section. (See Figures 2, 3 and 4.) You will need to factor in the thickness of your paver (3”
MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation.
You will need a 3/8” masonry bit for the Adrenaline™ slide.
Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching
to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
NOTE: All Adrenaline™ wedge anchors (17 ea.) are 3/8” x 7”.
Fig. 1
Fig. 2 – Round Pedestal (side view)
Fig. 3 – Step Pedestal (side view)
Fig. 4 – Exit Section (side view)
TG - Rev. 7/15
141
Figures 2, 3 and 4 show an example side view of a slide round pedestal, step pedestal and exit section and a wedge
anchor used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the
concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”.
INTENDED USE INSTRUCTIONS - SLIDE PRODUCTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Everyone who uses an Inter-Fab slide must know, understand and follow these instructions.
The 1999 ANSI/APSP 4 standard for above ground pools prohibits the use of slides or diving boards on aboveground pools.
Inter-Fab slides are designed for residential inground pool use only. Our slides may not be used on any above ground pool
or pools designed for above ground use. Such use of our slide may result in serious injury or death.
Inter-Fab slides should never be installed on wood decks, above ground pools, ponds, floating docks or platforms, boat
docks or houseboats or any natural body of water.
Inter-Fab slides should never be installed on any commercial, public or semi-public pool.*
Be familiar with the shape and depth of the pool before you slide. A slide should only be used with the proper water
safety envelope, as described in the installation manual and in accordance with the slide positioning instructions, also
described in the installation manual.
Because a slide may only be used in water 4’ deep or greater*, all slide users must be able to swim in deep water.
(*The Zoomerang slide requires a water envelope depth of 3’6” or greater.)
Weight limit for a slide is 200-350 pounds depending on the slide model, no slider weighing more than the maximum
weight limit for any given slide may use the slide.
The surface of the slide is very slippery when wet; USE CAUTION when entering the slide and when transitioning
from standing to sitting.
Slide in a feet first sitting position ONLY.
IMPORTANT: sliding headfirst is prohibited: serious spinal injury resulting in paralysis or death can result.
Maintain adult supervision at all times.
Only one person at a time is allowed on the slide; this includes the ladder.
Be sure the water delivery system is on and lubricating the slide prior to use.
Collision with another swimmer or a diver can result in serious injury or death for one or both persons: Before sliding,
always make sure that the path in front of the slide is free from any (including submerged) obstructions including other
people or objects in the pool such as rafts, inner tubes etc. When a diving board is also present, make sure you do not
use the slide while someone is on or using a diving board. Take turns.
No roughhousing or horseplay should be allowed on the slide at any time.
Do not stand, jump or dive from any part of the slide.
Do not slide on objects such as rafts or inner tubes. doing so greatly increases your risk of injury.
Do not slide through or at objects such as rafts or inner tubes, doing so greatly increases your risk of injury.
Do not use a slide if physically impaired or handicapped without your doctor’s permission.
Do not use a slide with a history of heart conditions, seizures, back problems, fainting or fear of heights.
Do NOT use a slide if you are pregnant.
Do not drink alcohol and use a slide.
Don’t take chances, inspect the slide at least once a year. Do not use the slide if any part becomes loose, damaged,
weakened or broken. If necessary, before using the slide again, have it inspected and repaired by a competent professional familiar with pool slides.
WARNING: SERIOUS INJURY OR DEATH CAN RESULT FROM THE
IMPROPER INSTALLATION OR USE OF A SLIDE.
SLIDE IN A SITTING
POSITION ONLY
DO NOT SLIDE HEAD FIRST
SERIOUS INJURY
CAN RESULT
DEEP WATER
SWIMMERS
ONLY
Face forward on the slide, holding the legs and arms with the
palms of your hands forward and tilted up.
When installed according to the slide installation instructions, our slides
substantially conform to Consumer Product Safety Standard Guidelines.
* These intended use instructions apply to all Inter-Fab slides, with the following exception for the BYOS 2 slide product ONLY.
BYOS 2 slides are designed for residential AND commercial applications.
142
TG - Rev. 7/15
CLICK 8
SLIDE CARE & MAINTENANCE:
ACRYLIC COMPONENTS -
You may safely use:*
• Chlorox
• Spic & Span Powder
• Mr. Clean
• Formula 409
• Windex
• Glass Plus
• Calgon Bath Oil Beads
Do not use:
• Lysol Disinfectant Spray
• Dow Disinfectant Bathroom Cleaner
• Pinesol
• Whitecap
• Lestoil
2: Light scratches, abrasions, gloss, etc.
Light abrasions and scratches may be removed and original gloss fully restored using the following
materials.*
• Novus Plastic Polish (Novus, Inc.)
• Mirror Glaze Professional Formula #17 (Mirror Bright Polish Co., Irvine, CA)
• Permatex Plastic Cleaner #403D (Permatex Co., Kansas City, KS)
• “J-Wax” or “Kit” Automotive Cleaner/Waxes (S.C. Johnson & Son)
• DuPont or Turtlewax “White Polish” automotive polishing compound.
Light Scratches: Very light scratches, scuff marks and haze can be hand polished with Permatex
Plastic Cleaner or Gel-Gloss. Follow the manufacturer’s guidelines. Clean cotton cloth works best for
applying the polish and buffing.*
POLYETHYLENE COMPONENTS Your slide requires periodic maintenance to keep it looking like new.
• Wash monthly or more frequently, if needed. Be careful to keep cleaning material from entering the pool.
• Wash with a mild soap such as hand dishwashing soap, avoid using strong cleaners or abrasives.
Avoid strong alkaline (such as tri-sodium phosphate) or highly acidic cleaners. Avoid bleach and
ammonia.
*These suggestions and data based on information we believe to be reliable, from our acrylic manufacturer.
They are offered in good faith, but without guarantee, as conditions and methods of use and procedures
are beyond our control.
TG - Rev. 7/15
143
1: General Cleaning
• Use nonabrasive soap and water when possible.
• Review cleaner’s label instructions before applying to acrylic surface.
• Avoid harsh chemicals and disinfectants.
INFUSION PRODUCTS MAINTENANCE:
BYOS 1™, BYOS 2™, & GRS™ SLIDES; POOL LIFESTYLE TABLES Your infusion slide or table/seat requires periodic maintenance to keep it looking like new and protected from
the elements.
Wash slide or table/seat monthly or more frequently if needed using a mild soap
and soft cloth. Keep cleaning materials from entering pool.
• Do not use abrasive cleaners, bleaches, chlorines, high alkaline or strong acidic cleaners.
• Do not use steel wool, wire brushes, metal scrapers, Scotchbrite or other abrasive sponge pads.
Keeping the gel coat finish of your slide or table/seat coated with wax - starting
when the slide or table is new - is the best way to prolong its life.
• Choose a wax intended for use on gel coat surfaces. Preferably one designed for use in a Marine
environment.
• Test product on small inconspicuous section of slide or table/seat prior to full application.
• While application instructions will vary between brands of wax, in general you apply the wax
with a cloth or foam pad using circular motion. Once wax dries to a haze, buff the excess with
a soft dry cloth.
• Routine waxing (at least twice a year) will maintain the smooth reflective surface of your slide or
table/seat.
144
TG - Rev. 7/15
CLICK 8
B Y O S 1 Q U O T E R E Q U E S T - PA R T 1
Distributor Name:
Phone:
Address:
Fax:
Contact Name:
Distributor Email:
Dealer/Builder Name:
Phone:
Address:
Fax:
Contact Name:
Dealer Email:
Est. Build Date:
BYOS 1™ DESIGN CONSIDERATIONS
• In your design, provision must be made for future removal of the slide from the substrate if necessary.
Flange/gasket connections must be accessible for inspection and maintenance, including but not limited to
retightening of fasteners as the slide can move slightly both vertically and horizontally based on the slider’s
weight and velocity.
• Do not construct objects or formations along or over the slide pathway that obstruct the pathway for sliders or
cause potential harm to the head, arms or legs. Minimum recommended head clearance above the slide
pathway is 7 feet.
• Minimum BYOS 1 water envelope is 6.5’ wide (centered on slide) x 13.5’ long x 4’ deep.
• All BYOS 1 products are for residential in ground pool installation and use only. Inter-Fab expressly disclaims
any and all warranties and liability arising from the installation or use of its BYOS 1 products in a commercial,
non-pool or above ground pool application or setting.
• Inter-Fab will provide you with a slide system which matches the pathway and spatial requirements you request
as closely as possible. It is important to note however, that Inter-Fab does not approve or accept liability
for BYOS 1 designs. All designs should be checked by a licensed Civil or Structural Engineer in your state,
and when necessary inspected/approved by the applicable local governing agency.
Did you know that you can get a custom colored
T7 Diving System to match your custom BYOS?
INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386
TG - Rev. 7/15
145
Job Reference:
STEP ONE
1. What is entry height above deck? ___________
2. What is exit height above deck? ___________
3. What is the estimated centerline length of runway? ___________
STEP TWO
1. Provide us with a drawing of your slide.
(Anything from a napkin drawing to an actual CAD drawing will suffice.)
Please Note: Height, slope and actual length of slide will be adjusted as close to your design as possible.
Actual designs may vary.
2. Choose Slide Color: (pick one)
Earth Tone Colors: ❏ Tan (-51); ❏ Gray (-52); ❏ Summit Gray (-53)
Granite Colors: ❏ Mont Blanc (-54); ❏ Pebble (-55); ❏ Fashion Gray (-56); ❏ Cappuccino (-57)
❏ Autumn Sun (-58); ❏ Safari Sunrise (-59); ❏ Starry Night (-60)
STEP THREE
1. Decide if you would like optional assist rails and provide appropriate lengths, if applicable.
2. Seating Assist Rails: ❏ Surface Mount 3.5” Flange; ❏ Sub-Surface Mount
3. Climbing Assist Rails: ❏ Surface Mount 3.5” Flange; ❏ Sub-Surface Mount
Length: ❏ 24”; ❏ 36”; ❏ 48”; ❏ Custom Length ___________
4. Choose Assist Rail Color: (pick one)
Standard Colors: ❏ Stainless Steel
Upgrade Colors: ❏ White (-1); ❏ Earth (-3); ❏ Copper Vein (-4); ❏ Hammertone Gray (-6);
❏ Light Gray (-9)
STEP FOUR
FAX this form to Marjie Beahan at: 5 2 0 - 7 9 0 - 7 1 2 7, or
EMAIL this form to [email protected]
BYOS 1™ LIABILITY DISCLAIMER
DISCLAIMER OF LIABILITY: This Price Quote and the design for BYOS 1 products shown herein are based solely on the
specifications provided to Inter-Fab, Inc. (“Inter-Fab”) by the Builder/Distributor. Inter-Fab expressly disclaims any liability
for the specifications or design, the suitability of BYOS 1 products specified herein to the installation location, the installation
or alteration of BYOS 1 products. By accepting this Price Quote, the Builder/Distributor assumes all responsibility for
the specifications and design, for the proper installation of BYOS 1 products and for any alteration of BYOS 1 products
and agrees to hold Inter-Fab harmless for any claims, damages or liability (including attorneys fees and costs) arising
from such specifications, design, installation not in compliance with Inter-Fab’s installation instructions, or alteration of
BYOS 1 products. By accepting this Price Quote, the Builder/Distributor agrees to deliver, and assumes responsibility
for delivering, a copy of this Disclaimer of Liability, Proper Use Instructions, and Installation Warnings to the retail consumer.
Pool/Spa Table to match your custom BYOS?
146
TG - Rev. 7/15
CLICK 8
Distributor Name:
Phone:
Address:
Fax:
Contact Name:
Distributor Email:
Phone:
Address:
Fax:
Contact Name:
Dealer Email:
Est. Build Date:
BYOS 2™ DESIGN CONSIDERATIONS
• In your design, provision must be made for future removal of the slide from the substrate if necessary.
Flange/gasket connections must be accessible for inspection and maintenance, including but not limited to
retightening of fasteners as the slide can move slightly both vertically and horizontally based on the slider’s
weight and velocity.
• Do not construct objects or formations along or over the slide pathway that obstruct the pathway for sliders or
cause potential harm to the head, arms or legs. Minimum recommended head clearance above the slide
pathway is 7 feet.
• Minimum BYOS 2 water envelope is 6.5’ wide (centered on slide) x 13.5’ long x 4’ deep.
• All BYOS 2 products are for in ground pool installation and use only. Inter-Fab expressly disclaims any and
all warranties and liability arising from the installation or use of its BYOS 2 products in a non-pool or
above ground pool application or setting.
• Inter-Fab will provide you with a slide system which matches the pathway and spatial requirements you request
as closely as possible. It is important to note however, that Inter-Fab does not approve or accept liability
for BYOS 2 designs. All designs should be checked by a licensed Civil or Structural Engineer in your state,
and when necessary inspected/approved by the applicable local governing agency.
T7 Diving System to match your custom BYOS?
TG - Rev. 7/15
147
Job Reference:
STEP ONE
1. What is entry height above deck? ___________
2. What is exit height above deck? ___________
3. What is the estimated centerline length of runway? ___________
STEP TWO
1. Choose Installation Type: (pick one)
❏ Residential ❏ Commercial
STEP THREE
1. Provide us with a drawing of your slide.
(Anything from a napkin drawing to an actual CAD drawing will suffice.)
Please Note: Height, slope and actual length of slide will be adjusted as close to your design as
possible. Actual designs may vary.
2. Choose Slide Color: (pick one)
Earth Tone Colors: ❏ Tan (-51); ❏ Gray (-52); ❏ Summit Gray (-53)
Granite Colors: ❏ Mont Blanc (-54); ❏ Pebble (-55); ❏ Fashion Gray (-56); ❏ Cappuccino (-57)
❏ Autumn Sun (-58); ❏ Safari Sunrise (-59); ❏ Starry Night (-60)
STEP FOUR
FAX this form to Marjie Beahan at: 5 2 0 - 7 9 0 - 7 1 2 7, or
EMAIL this form to [email protected]
BYOS 2™ LIABILITY DISCLAIMER
DISCLAIMER OF LIABILITY: This Price Quote and the design for BYOS 2 products shown herein are based solely on the
specifications provided to Inter-Fab, Inc. (“Inter-Fab”) by the Builder/Distributor. Inter-Fab expressly disclaims any liability
for the specifications or design, the suitability of BYOS 2 products specified herein to the installation location, the installation
or alteration of BYOS 2 products. By accepting this Price Quote, the Builder/Distributor assumes all responsibility for the
specifications and design, for the proper installation of BYOS 2 products and for any alteration of BYOS 2 products and
agrees to hold Inter-Fab harmless for any claims, damages or liability (including attorneys fees and costs) arising from such
specifications, design, installation not in compliance with Inter-Fab’s installation instructions, or alteration of BYOS 2 products.
By accepting this Price Quote, the Builder/Distributor agrees to deliver, and assumes responsibility for delivering, a copy
of this Disclaimer of Liability, Proper Use Instructions, and Installation Warnings to the retail consumer.
Pool/Spa Table to match your custom BYOS?
148
TG - Rev. 7/15
CLICK 8
2015 GARDEN RIDE SERIES PRODUCT SELECTION GUIDE - DEALER COPY
INTER-FAB INC • 3050 S. ALVERNON WAY • TUCSON, AZ 85713 • 800.737.5386 • FAX 520.790.7127
Distributor Name:
Contact Name:
Address:
Contact Name:
Address:
Job Reference:
Signature:
Phone: (
Fax: (
Phone: (
Fax: (
)
)
)
)
Est. Build Date:
Date:
7 FT GARDEN RIDE SLIDE:
❑ LEFT TURN
❑ RIGHT TURN
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
-51
-52
-53
-54
-55
-56
-57
-58
-59
-60
TAN
GRAY
SUMMIT GRAY
MONT BLANC
PEBBLE
FASHION GRAY
CAPPUCCINO
AUTUMN SUN
SAFARI SUNRISE
STARRY NIGHT
❑ OPTIONAL SUPPORT SYSTEM
In addition to Slide Price
(If declined initial here ________)
❑ LEFT TURN
❑ RIGHT TURN
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
-51
-52
-53
-54
-55
-56
-57
-58
-59
-60
10 FT GARDEN RIDE SLIDE
Right Turn Shown
TAN
GRAY
SUMMIT GRAY
MONT BLANC
PEBBLE
FASHION GRAY
CAPPUCCINO
AUTUMN SUN
SAFARI SUNRISE
STARRY NIGHT
Right Turn Shown
❑ LEFT TURN
❑ RIGHT TURN
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
-51
-52
-53
-54
-55
-56
-57
-58
-59
-60
TAN
GRAY
SUMMIT GRAY
MONT BLANC
PEBBLE
FASHION GRAY
CAPPUCCINO
AUTUMN SUN
SAFARI SUNRISE
STARRY NIGHT
PLEASE NOTE: Freight is extra – guaranteed not to exceed $350.00 (U.S.). Inter-Fab ships direct to dealer place of business or job site.
TG - Rev. 7/15
149
Right Turn Shown
RAIL MAINTENANCE:
STAINLESS STEEL:
Inter-Fab manufactures pool ladders and rails in 304 or 316L Stainless Steel. These grades of stainless are fairly impervious
to swimming pool water that is in balance. However, unbalanced water chemistry and stray electrical current can cause
stains and/or rust. Other possible causes are improper electrical grounding, indoor environment, administering chemicals
near the rail or ladder, storing your rails and ladders near chemicals, etc.
With proper care and routine maintenance you can extend the life of your stainless steel pool rails and ladders:
1. Regularly inspect your stainless steel products; check for corrosion around mounting hardware and escutcheons. Replace
hardware when needed.
2. Rinse off rails and ladders frequently with fresh water to remove chemicals from your pool water and wipe dry with a
clean cloth.
3. To clean your stainless steel; first remove the rail or ladder from the pool. Using warm water and gentle soap or detergent
and a soft cloth, rub the rail along the polish lines of the steel. Rinse thoroughly.
4. For stubborn stains you may try Brasso® metal polish.
5. You may apply marine grade wax or paste car wax to help protect your rail or ladder from the elements longer.
Do not use steel wool, abrasive cleaners, mineral acids, bleaches or chlorine cleansers on your stainless steel.
POWDER COATED STAINLESS STEEL:
1. Regularly inspect your pool products; check for corrosion around mounting hardware and escutcheons. Replace hardware
when needed.
2. To clean your powder coated products; first remove the rail or ladder from the pool. Using warm water and gentle soap
or detergents, wash the finish with a soft cloth. Rinse thoroughly with cold water.
3. For stubborn stains repeat step 2 and use a soft sponge to gently scrub away dirt. Do not use abrasive cleaners, scouring
pads or other items that can cause damage to the powder coat.
4. For nicks and scratches you can purchase a touch up kit to apply to cleaned exposed stainless steel.
THERMO PLASTIC COATED STAINLESS STEEL:
1. Regularly inspect your pool products; check for corrosion around mounting hardware and escutcheons. Replace hardware
when needed.
2. To clean your thermo plastic coated products; first remove the rail or ladder from the pool. Using warm water and gentle
soap or detergents, wash the finish with a soft cloth. Rinse thoroughly with cold water.
3. For stubborn stains repeat step 2 and use a soft sponge to gently scrub away dirt. Do not use abrasive cleaners, scouring
pads or other items that can cause damage to the powder coat.
WE OFFER A ZINC ANODE TO
HELP PROTECT YOUR RAILS IN
MORE CORROSIVE POOL
ENVIRONMENTS.
The anode can be attached on a ladder
near the ladder bumper or on a standard rail
near the escutcheon.
(Part #ANODE)
150
TG - Rev. 7/15
CLICK 8
INTER-FAB BRONZE OR PLASTIC ANCHOR SOCKET INSTALLATION (IN DECK)
Installing Product in Anchor Sockets
• Using tool, lower the wedge within the anchor by turning the bolt counterclockwise. To allow maximum clearance for the product,
drop the wedge as far as you can without disengaging the wedge from the bolt.
• Gently slide product into anchor(s).
• INSTALLATION TIP: To avoid damage to finish and ease of installation use two or more people to install large span rails
and rails with 8” on center spans. Ensure both ends of the rail are lined up plumb with the anchor and insert both ends at
the same time.
• Using tool, tighten wedge anchor by turning the bolt clockwise to secure the product in the anchor. Do not over tighten.
IN DECK RETROFIT INSTALLATION USING IN DECK ANCHOR SOCKETS:
Installing Anchors in the Deck
You may install Inter-Fab Bronze or Plastic anchor sockets in existing concrete. The integrity of the concrete is essential to the
rigidity/security of the product being installed. Professional installation is recommended.
Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s
edge and the correct span between anchors if using two for installation.
• First inspect the anchors for defects or missing pieces.
• For plastic anchors make sure the bonding screw is flush with the inside of the anchor.
• Using tool, lower the wedge anchor by turning the bolt counterclockwise. Drop the wedge as far as you can without disengaging
the wedge from the bolt.
• Slip the anchor(s) onto the rails to confirm fit.
• Mark and drill a minimum 4” diameter hole at least 5” deep. (See Figure 1)
Figure 1
INSTALLATION TIP: The center of the anchor is not the center line for the product, measure correctly to keep center line
measurements the correct distance apart.
• Do not make holes larger than necessary or escutcheons may not cover the installation.
• Use a pry bar or sledge hammer to break the core pieces from the base of the hole.
• Clean all debris from inside the hole, check the depth and insert the anchor to ensure proper fit.
• Check your local electrical code to determine bonding requirements. Bond anchor in accordance to code.
• Cover the hole in the bottom of the anchor with tape to keep concrete out.
• Use concrete or anchoring epoxy, mix to manufacturer’s instructions.
TG - Rev. 7/15
151
NEW CONSTRUCTION INSTALLATION USING IN DECK ANCHOR SOCKETS:
Installing Anchors in the Deck
Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s edge and
the correct span between anchors if using two for installation.
• First inspect the anchors for defects or missing pieces.
• For plastic anchors make sure the bonding screw is flush with the inside of the anchor.
• Using tool, lower the wedge within the anchor by turning the bolt counterclockwise. To allow maximum clearance for the product,
drop the wedge as far as you can without disengaging the wedge from the bolt.
• Slip the anchor(s) onto the product to confirm fit.
• Tape/Cover the anchor socket and the hole in the bottom of the anchor to keep concrete out.
• Make sure the top edge of the anchor is flush with the concrete surface.
• Check that the anchor is level and plumb – critical for proper installation of product.
• Use concrete with a minimum compression strength of 3,000 PSI. Following concrete manufacturer’s instructions; allow the
concrete to fully cure prior to installing product.
IN DECK RETROFIT INSTALLATION USING IN DECK ANCHOR SOCKETS (CONT.)
•
•
•
•
Fill area around the anchor with mixture.
Make sure the top edge of the anchor is flush with the concrete surface.
Check that the anchor is level and plumb – critical for proper installation of product.
Allow the concrete or epoxy to fully cure prior to installing product.
Figure 2
If the depth of the existing concrete is less than the required 5” depth, remove the fill material below the concrete to obtain 6” depth.
The diameter of the hole below the concrete should be slightly larger than the core hole. (See Figure 2)
PERMANENT CONCRETE INSTALLATION:
Some Inter-Fab rails can be mounted directly into the concrete deck. These rails have a hole drilled through the bottom of each
support leg, 1-1/2” up from the end of the rail.
• Place a 6” long piece of #3 rebar through the hole on each support leg. Determine the correct positioning of product
around the pool. Confirm the maximum/minimum distance from water’s edge.
• Support the product as the concrete is poured and during cure time.
SPECIAL AFTER MARKET DECK TOP MOUNTED RAIL INSTALLATION:
Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s edge.
• Check your local electrical code to determine bonding requirements. Bond rail or flange in accordance to code.
• With a marker, mark the 3 flange hole locations for each flange.
• Using a 1/2” masonry bit and hammer drill, drill each hole 1-9/16” deep. Do not drill further down than 1-9/16” deep.
Drop in anchors must NOT extend above deck.
INSTALLATION TIP: Measure 1-9/16” on 1/2” drill bit and mark it with a piece of tape or marker so each hole is drilled
to the correct depth.
• Place anchor in hole and tap until flush with concrete.
• Expand anchor with setting tool provided. Anchor is properly expanded when shoulder of setting tool is flush with top of anchor.
• Align product flanges with anchors.
• Secure product with flat washer, lock washer and 1” bolt. (See Figure 3)
Figure 3
152
TG - Rev. 7/15
CLICK 8
CUSTOM HANDRAIL FORM
Custom rails and ladders are non-returnable and are shipped via LTL shipment.
Name of Distributor:
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
Fax completed form to 520-790-7127 or email to [email protected]
QUOTES ARE ONLY SENT TO POOL DISTRIBUTOR; INTER-FAB WILL NOT QUOTE DEALER OR HOMEOWNER DIRECT.
❑ 2 Bend Handrail ❑ 3 Bend Handrail
All dimensions should be indicated in inches and REQUIRE the following information using CENTERLINE dims:
________ A = (For 3 Bend Handrail ONLY)
________ B = Dimension from the Bottom of Leg to the Centerline of the Peak of the Bend*
*Include Amount Needed for Anchor
________ C = The Rise from the Bottom of the One Leg to the Bottom of the Other Leg
________ D = Dimension from the Bottom of the Leg to Where the Bend Begins**
**Include Amount Needed for Anchor
________ E = The Span is the Centerline of One Leg to the Centerline of the Other Leg
❑ Residential Use; ❑ Commercial Use
TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109; ❑ 1.50 X .120
STAINLESS STEEL GRADE: ❑ 304 (Pool Grade); ❑ 316L (Marine Grade)
COATING: Powder Coating: ❑ White; ❑ Earth; ❑ Copper Vein; ❑ Hammertone Gray; ❑ Light Gray
MUST BE COMPLETED TO QUOTE:
Please note that 4” will be taped off bottom of rail when powder coated. If only 3” is to be taped off, please indicate on Purchase Order.
Thermo Plastic Coating:
❑ White; ❑ Tan; ❑ Gray
All Thermo Plastic Coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
NOTES: 1) Anchors Not Included; 2) Escutcheons Included ONLY for Powder Coated Rails and Thermo Plastic Rails
A
B
B
D
C
E
D
C
E
TG - Rev. 7/15
153
HANDRAIL PATTERN:
CUSTOM STAIR RAIL FORM
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
STAIR RAIL PATTERN:
❑ 3 Bend Deck to Deck ❑ 4 Bend Deck to Deck
❑ Braced Deck to Deck ❑ Dipped Braced Deck to Deck
________ A = Top Span (For 4 Bend Stair Rail ONLY)
________ B = Dimension from the Bottom of Leg to the Centerline of the Peak of the Bend*
________ C = Dimension from the Bottom of the Leg to the Centerline of the Lowest Horizontal Span*
________ D = Centerline Dimension between the Deck Posts of the Handrail
________ E = Centerline Dimension between the Back Deck Leg and the Center of the Forward Bend
TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109; ❑ 1.50 X .120
Thermo Plastic Coating: ❑ White; ❑ Tan; ❑ Gray
NOTES: 1) Anchors Not Included; 2) Escutcheons Included ONLY for Powder Coated Rails and Thermo Plastic Rails
3 BEND
DECK TO DECK
B
BRACED
DECK TO DECK
B
C
D
C
D
E
E
A
4 BEND
DECK TO DECK
B
DIPPED BRACED
DECK TO DECK
B
C
C
D
D
E
E
154
TG - Rev. 7/15
CLICK 8
CUSTOM LADDER/GRAB RAIL FORM
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109
Thermo Plastic Coating:
❑ White; ❑ Tan; ❑ Gray
❑ CUSTOM LADDER DESIGN
________ A = Height from Deck to Top of Ladder
________ B = Horizontal Span
________ C = Length from Deck to Bottom of Ladder
________ D = Distance from Deck to 1st Tread
________ E = Distance between Treads
❑ Check for Cross Brace
________ F = For Cross Brace (ONLY) – Height from Deck to Bottom of Brace
________ Number of Treads
TYPE OF TREAD:
❑ SUT (Stainless Steel Sure Step Tread)
❑ HIP (High Impact Plastic - Residential Only)
❑ HARTLEY (PC or TPC Only)
❑ CUSTOM GRAB RAIL DESIGN
❑ Pair ❑ Single
All dimensions should be indicated in inches and REQUIRE the following information
using CENTERLINE dims:
________ A = Height from Deck to Top of Rail
________ B = Distance from Deck to Centerline of the Lowest Horizontal Span
________ C = Dimension between Deck Posts of Rail (anchor position)
________ D = Dimension between Back of Deck Leg and the Center of the Forward Bend
TG - Rev. 7/15
155
INTER-FAB VINYL LINER 1.90” ANCHOR
INSTALLATION HELP GUIDE
DESIGNED FOR USE IN VINYL LINER POOLS
For Use With All Inter-Fab, Inc.
16” and 30” Tables and 16” Seats
INTENDED USE INSTRUCTIONS:
• For use ONLY with Inter-Fab, Inc. 16” or 30” Beverage/Umbrella Tables
or Seats.
• For use ONLY in vinyl liner pools.
• TO AVOID ENTRAPMENT DO NOT INSTALL NEAR WALLS OR OTHER
OBJECTS WHERE THERE WILL NOT BE SUFFICIENT CLEARANCE WHEN
USED WITH A 16” OR 30” DIAMETER TABLE OR SEAT.
WARNING: IMPORTANT INSTALLATION INFORMATION
The installation of this product should be done only by a licensed and professional installer. Installation should
be done strictly in conformance with all local building codes, electrical codes and other building and safety laws
and regulations. Among other things, that your installer should carefully analyze the need to bond the product
to prevent an electrical hazard. Failure to properly install this product could result in a dangerous condition,
including but not limited to electrical or structural hazards. Inter-Fab, Inc. disclaims all liability arising from the
installation and the user assumes all risk associated with the installation.
156
TG - Rev. 7/15
CLICK 8
INTER-FAB VINYL LINER 1.90” ANCHOR
INSTALLATION HELP GUIDE – CONTINUED
12”
4”
”
24
24”
Figure 1
24”
Figure 2
INSTRUCTIONS:
• Locate suitable location for anchor installation. Allow sufficient clearance for use of either
the 16” or 30” diameter tables and seats.
• Anchor must be set in concrete in a minimum size pour of 24” L x 24” W x 12” D, allowing
a minimum thickness below anchor of 4”.
• Make sure the anchor is level and the top of the body is flush with the top of the concrete.
(insure no concrete gets into the body during pour)
• When concrete is cured, install gasket, liner and faceplate per manufacturer’s specifications.
• Use included cap when anchor is not being used.
TG - Rev. 7/15
157
MINIMUM CONCRETE POUR DIMENSIONS:
TECHNICAL GUIDE NOTE: Please note that the Inter-Fab, Inc. Technical Guide is to serve as a
source of information for reference only. Please adhere to Inter-Fab, Inc. installation manuals and your
local building codes for proper installation of any and all Inter-Fab products. Although every effort has
been made to assure the accuracy of the information provided herein, you may want to refer to the website
(inter-fab.com) or call customer service (800.737.5386) for the most current information.
LIMITED WARRANTY
Inter-Fab, Inc. will repair or replace, at its option, any product manufactured by Inter-Fab, Inc. that fails during the applicable
warranty period because of a manufacturing or material defect; provided that the defect is not the result of improper installation,
improper use or care, negligence, alterations or modifications to the product, or natural accidents (acts of God). The applicable
warranty period for products manufactured by Inter-Fab, Inc. is three (3) years from the date of retail purchase, except as
specified below:
Echoes of Nature™ products are individually handcrafted and painted by skilled artisans and as a result, dimensional
differences and color variations are normal and are not a basis for warranty coverage. The warranty period for pumps sold with
the Echoes of Nature™ products is three (3) years from the date of retail purchase.
Water Sports™ sports equipment warranty periods are as follows: Volleyball Poles, Basketball Poles, Basketball Rim, and
Basketball Backboard are one (1) year from date of retail purchase. Volleyball, Volleyball Net, Basketball, Basketball Net,
and pumps are warranted for ninety (90) days from date of retail purchase.
The Board Fall, Board Fall-L (LED), and Board Fall-F (fiber optic) water features, used for the Jump & Splash™, T7™
and aquaBoard™ products, have a warranty period of one (1) year from the date of retail purchase.
Zoomerang™ slide products warranty period is one (1) year from the date of retail purchase.
Build Your Own Slide™ (BYOS™), Build Your Own Slide 2™ (BYOS 2™), Garden Ride Series™, Pool/Spa
Table™, Pool/Spa Seat™, and Pool Lifestyle™ products warranty periods are one (1) year from the date of retail purchase.
City 2™ Slide and City Base™ products warranty period are one (1) year from the date of retail purchase.
i-Lift™ products warranty period are two (2) years from the date of original shipment. The battery, charger, receiver (control
box on i-Lift), transmitter (remote), and actuator have a warranty period of one (1) year from the date of original shipment.
Unless expressly stated otherwise all products manufactured by Inter-Fab are for residential installation (single family
residence) inground pool use only. Inter-Fab, Inc. expressly disclaims any and all warranties and liability arising from the
installation or use of its residential products for any non-residential use such as semi-public, public, or commercial applications.
Products expressly manufactured for commercial installation and use will be subject to this limited warranty.
This limited warranty is in lieu of all other warranties, whether express or implied. Inter-Fab, Inc. disclaims any warranty of
merchantability or fitness for a particular use, and noninfringement in relation to any of its products and Inter-Fab, Inc. is not liable
for consequential, incidental or specific damages. This warranty is limited to the repair or replacement of the manufacturing
or material defect, or refund of the original purchase price, whichever is less, at the sole option of Inter-Fab, Inc., and
expressly does not cover any labor or reinstallation expenses related to the replacement of any and all Inter-Fab products.
This limited warranty shall be the sole and exclusive remedy of irrespective of whether the claims are made in contract, tort,
warranty, law, equity or by statue.
This warranty is to the original purchaser of the product only. Inter-Fab’s limited warranty is neither transferable nor portable
from consumer to consumer. The effective coverage date begins at the date of retail purchase. Product owner or representative
must notify Inter-Fab, Inc. (or its wholesale agent) in writing, giving a full description of the nature of the product defect or
failure along with proof of purchase, serial number(s) of the product and photos within thirty (30) days of the expiration of
the applicable warranty period. Inter-Fab, Inc. reserves the right to physically inspect damaged or defective products or
components to determine the cause of the damage or defect, prior to authorizing repair or replacement of its products.
Customer Service / Technical Support
Monday – Friday: 7am – 4pm MST
(800) 737-5386 • [email protected]
158
TG - Rev. 7/15
CLICK 8
PRODUCT
DIVING PRODUCTS
Diving Board - Construction
Duro-Beam
Techni-Beam
Duro-Spring
Olympian
Baja Jump Board
Edge
T7 Diving Board
Commercial
Diving Bases - Active vs. Passive
La Mesa
Los Arcos
Duro-Spring
U-Standards
Boulder Springs Diving Base
Edgestone Series Diving Base
Techni-Spring - steel
Techni-Spring - fiberglass
Baja Jump Stand
T7™ Diving System
Edge™ Diving System
City Base
Slides - Acrylic
Wild Ride™ Slide
Edgestone Series Slide Rock™ - Right Turn ONLY
Zoomerang™ Slide - Right Turn ONLY
City 2™ Slide
Slides - Polyethylene
X-Stream 2™ Slide
G-Force 2™ Slide
Adrenaline™ Slide
Slides - Infusion
BYOS 1™ (Build Your Own Slide - 1st gen.)
BYOS 2™ (Build Your Own Slide - 2nd gen.)
Garden Ride Series Slides
Rails & Ladders - Overview
Ladder Designs - Traditional
Residential Standard
Residential Economy
Residential Camelback
Residential Modified Camelback
Commercial
Commercial Cross Braced
Florida Style w/Cross Brace
Residential Hinged Ladder
Stair Rails - Rail Designs - Traditional
3 Bend Return to Deck
3 Bend Return to Deck - Braced
4 Bend Return to Deck
4 Bend Return to Deck - Braced
Handrails - Rail Designs - Traditional
2 Bend Deck to Stair
3 Bend Deck to Stair
Side Mount (Deck to Deck)
Grab Rails / Spa Rails - Rail Designs - Traditional
Figure 4 Grab Rail
New Figure 4 Grab Rail
Gibralter Style Rail
Ring Style Grab Rail
Single Post Grab Rail
Exercise Bars - Rail Designs
Embedded in Wall w/o Flange
Flanged
Fill Spouts
Designer Series Rails - Overview
Designer DR-G3D Grab Rail
Designer DR-G3DE Grab Rail
RESIDENTIAL SLIDES
RAIL GOODS
PA G E
2
3
3
4
4
5
5
6
6
7
8-9
10-11
12-13
14-15
16
17
18-19
20-21
22-23
24-25
26-27
28-29
31
32-35
36-39
40
41-43
44-47
49
50-53
54-57
58-61
62
63
63
64-72
73-74
75
76
76
77
77
78
78
79
79
80
81
81
82
82
83
84
84
85
86
87
87
88
88
89
89
90
91
91
92
93
94
94
TG - Rev. 7/15
PRODUCT INDEX
i
PRODUCT INDEX
ECHOES OF NATURE
REFERENCE INFORMATION
ii
TG - Rev. 7/15
PRODUCT
PA G E
Designer DR-D2D3 Deck to Deck Stair Handrail
Designer D2S Deck to Stair Handrail
Designer Ladder
Deck Top Mounted Rails - Overview
Deck Top 3 Bend - Traditional
Deck Top 3 Bend - Braced - Traditional
Deck Top 4 Bend - Traditional
Deck Top 4 Bend - Braced - Traditional
Deck Top Figure 4 - Traditional
Deck Top Economy Figure 4 - Traditional
Deck Top Ladder - Traditional
Designer Deck Top Ladder
Designer Deck Top Grab Rail
Designer Deck Top Economy Grab Rail
Designer Deck Top Deck to Deck Return Stair Rail
Deck Top Designer Deck to Deck Stair Handrail
Pool Games - Overview
Basketball Set
Volleyball Set
Pool/Spa Table & Seat - Overview - Gunite New Construction
Pool/Spa Table - Gunite New Construction
Pool Seat - Gunite New Construction
16” Tanning Ledge Table - Gunite New Construction
30” Tanning Ledge Table - Gunite New Construction
Tanning Ledge Tables - Overview - Gunite Retrofit/Aftermarket
16” Tanning Ledge Table - Gunite Retrofit/Aftermarket
30” Tanning Ledge Table - Gunite Retrofit/Aftermarket
Pool/Spa Table & Seat - Overview - Vinyl Liner New Construction
Pool/Spa Table - Vinyl Liner New Construction
Pool Seat - Vinyl Liner New Construction
16” Tanning Ledge Table - Vinyl Liner New Construction
30” Tanning Ledge Table - Vinyl Liner New Construction
Boulder Springs Quick Reference
Edgestone Series Quick Reference
Paver Kit Info - Diving Products
Intended Use Instructions - Diving Products
Hole Drill Patterns
Custom Drill Request Form
Competitor Board Information
Competitor Jig Information
Residential Diving Envelope Information
Inter-Fab Pool Specifications – ANSI/APSP/ICC-5 2011
Residential Slide Water Envelope Information
Zoomerang™ Slide
White Water™, Wild Ride™, X-Stream 2™, City 2™ Slides
G-Force 2™ & Adrenaline™ Slides
BYOS 1™ & BYOS 2™ Slides
GRS 7’, 10’ & 15’ Slides
Residential Slide Paver Kit Information
Zoomerang™ Slide
City 2™ Slide
White Water™ & Wild Ride™ Slides
X-Stream 2™ & G-Force 2™ Slides
Adrenaline™ Slide
Intended Use Instructions - Slide Products
Slide Care & Maintenance
BYOS 1™ Quote Request Form
BYOS 2™ Quote Request Form
Garden Ride Series Product Selection Guide
Rail Maintenance
Installation Guide for Rail Goods
Custom Handrail Request Form
Custom Stair Rail Request Form
Custom Grab Rail & Ladder Form
Vinyl Liner 1.90” Anchor Installation Guide
Product Warranty Information
CLICK 8
95
95
96
96
97-98
99
99
100
100
101
101
102
102
103
103
104
104
105
106
106
107
108
108
109
109
110
111
111
112
113
113
114
114
115
116
117
118
119
120
121-123
124-125
126
127-130
131-135
131
132
133
134
135
136-141
136
137-138
139
140
141
142
143-144
145-146
147-148
149
150
151-152
153
154
155
156-157
158
PRODUCT COLOR AVAILABILITY
WHITE WITH WHITE TREAD
BLUE WITH WHITE TREAD
Diving Boards - standard
WHITE
TAN WITH TAN TREAD
BLUE
GRAY WITH GRAY TREAD
Diving Boards - upgrade
BLACK WITH GRAY TREAD
GRAY
TAN
Acrylic Slides - standard
Acrylic Slides - upgrade
SUMMIT GRAY
DESERT TAN
Rotomolded Slides (X-Stream 2, G-Force 2, Adrenaline) - standard
GRAY
MONT BLANC
SUMMIT GRAY
Infusion Products (Pool Lifestyle Tables & Seats, BYOS Slides, GRS Slides - solid colors
PEBBLE
FASHION GRAY
CAPPUCCINO
AUTUMN SUN
SAFARI SUNRISE
Infusion Products (Pool Lifestyle Tables & Seats, BYOS Slides, GRS Slides - granite colors
LIGHT GRANITE
DARK GRANITE
BROWNSTONE
RUSTIC SANDSTONE
Boulder Springs Collection
GRAYSTONE
EARTH
WHITE
TRUE COPPER
WOK Products
LIGHT GRAY
HAMMERTONE
Powder Coated Rails
TAN
Thermo Plastic Rails
STARRY NIGHT
SUNSET RED
Edgestone Series - standard
WHITE
TAN
COPPER VEIN
BLACK
GRAY
Colors shown here are approximate. Actual hues may vary. We strive to make our colors as accurate as possible,
however, printed images are intended as a guide only and should not be regarded as precise representation.
product information & support
800-737-5386
INTER-FAB, INC. MISSION STATEMENT:
We are committed to provide innovative, superior, high quality
products at fair and competitive prices enhanced by
extraordinary customer service.
follow us...
/interfabulous
/interfab
Rev. 7/15
WE’RE EXPERTS IN FUN!

TECHNICAL GUIDE - Inter-Fab

Transcription

Similar documents

Issue 3 - June 7, 2008

Sensation ADA Deck Plan

Sensation Deck Plan PDF

Fontaine Magnitude 55L Lowbed Find out why

9703 Juniper Court - Single Property Websites

E•deck - mangaris.com

Magnitude 55L Plus - Fontaine Heavy-Haul

Leander - Aypioss

treadmill - TRUE Fitness Equipment

the PDF booklet