Event Guide

Transcription

Event Guide

Official Publication of:
Achieving
Efficiency
l
o
e
Th
April 16 -18, 2013
Cobo Center • Detroit, Michigan, USA
EVENT GUIDE
Includes Final Program and
Exhibit Directory
P130125
se
s
E
ial
t
n
y
og
m
to
u
A
Te
e
tiv
Host Company
Tier One
Strategic Partner
c
o
hn
E
nt
e
v
www.dspace.com
System Architecture
Rapid Control Prototyping
ECU Autocoding
HIL Te sting
System Architecture
ECU Autocodin g
HIL Te stin g
System Architecture
VEOS for All, All for VEOS
ECU Autocodin g
HIL Te stin g
Virtual ECUs for early validation. Virtual test benches. HIL test preparation.
System Architecture
Autocodin
g
HIL Te stinand
g
VEOS, the new offlineECU
simulation
platform
from dSPACE, is multitalented
multi-useful:
System Architecture
ECU Autocodin
g
 Vehicle dynamics maneuver
simulation
System Architecture
ECU Autocodin g
 The same tool chain as for HIL simulation

HIL Te stin g
Virtual CAN bus simulation
HIL Te stin g
VEOS – for different users, for different applications, from the beginning
to the end of the ECU development process.
When will you join the team?
Visit us at Booth #401
What’s inside
Welcome
2
Event Overview
4
General Information
6
Special Events and
Networking Opportunities
Tuesday
Wednesday
Thursday
Chat with the Experts
Career Fair
Ride and Drive
Management Programs
Cobo Center Floor Plan
14
18
20
22
24
26
27
40
Technical Sessions
Electronics 42
Exhibitors
56
58
Emissions/Environment
Exhibitors
76
Integrated Design & Manufacturing
78
Exhibitors
86
88
Management
Exhibitors
92
Materials 94
Exhibitors
113
Propulsion/Powertrain
114
Exhibitors
158
160
Safety/Testing
Exhibitors
178
Participant Index
180
Awards192
Marriott Renaissance Center Floor Plan 196
Seminars198
Committee, Task Force and
Board Meetings
200
Call for Papers
204
Exhibit Directory
205
Exhibit Floorplan
206
Sponsors226
228
Ad Index
10%
TOTAL RECOVERED FIBER
ALL POST-CONSUMER FIBER
SAE 2013 World Congress
1
Welcome to the SAE 2013 World Congress!
Welcome to the 2013 SAE World Congress SAE World Congress
Leadership Team
General Chairman
Mircea Gradu
Chrysler Group LLC
Tier One Strategic Partner
Juergen Greiner
ZF Friedrichshafen
Co- Executive Assistants
to the General Chairman
Matthew Reynolds
Joseph M. Guertin
Chrysler Group LLC
General Chairman
Chung Kook Park
Hyundai Motor Company
Executive Assistant to
the General Chairman
Geoffrey J. Diamond
Hyundai America Technical
Center, Inc.
2013 SAE Detroit Section Chair
Jeremy Goddard
IDIADA North America
SAE Staff Team Leader
Patti Kreh
SAE International
Chrysler Group LLC is proud to be the host company for
the 2013 SAE World Congress and I am honored to serve
as the General Chairman.
I would like to thank our Tier One strategic partner ZF
Friedrichshafen AG, Industry Coalition members, SAE
International staff and the ZF Friedrichshafen AG and
Chrysler Group planning teams for their time and effort in
delivering a truly international conference. It is one of the
largest and most important events of its kind. The SAE
World Congress continues to attract industry, academic
and government participants from around the globe.
Mircea Gradu
General Chairman
2013 SAE World Congress
I also want to thank you – the conference attendees – for your involvement and
participation in this event. Now more than ever, the entire industry must work together
to assemble the engineering talent and elevate the passion to foster responsible and
sustainable mobility, while rewarding those within the engineering community who are
effective stewards of our natural resources. This week will offer many opportunities to
collaborate and network with your peers, participate in the exclusive ride-and-drive and
hear global experts discuss topics of critical importance to our industry.
Efficiency is essential to the success of next-generation automobiles. The 2013 SAE
World Congress theme “Achieving Efficiency” underscores the significant and exciting
challenges awaiting those companies and individuals that dare to be creative and dream
big. The SAE World Congress represents an unparalleled opportunity to explore new
ideas and new technologies in a variety of forums providing support and encouragement
for engineers within the industry to work together to achieve efficiency.
Each day features a keynote address from a recognized industry leader or stakeholder,
culminating with Thursday evening banquet speaker, Chrysler Group CEO and
Chairman Sergio Marchionne. Additional agenda highlights include:
•
Keynotes by California Air Resources Board Chairman Mary Nichols, Virgin Galactic
CEO George Whitesides and retired General Motors Vice Chairman Bob Lutz
•
The Management Forum, headlined by the AVL Technology Leadership Center and
the FEV Powertrain Innovation Forum
•
The Technical Program, which affords the opportunity to learn from more than
1,300 papers written by your peers
•
The show floor, which offers hands-on exposure to new technologies
•
Events under the banner, “A World in Motion,” allowing future engineers to further
their understanding of the profession by engaging with industry stakeholders
Thank you again for joining us for the 2013 SAE World Congress. I believe you will find
that the event has something for everyone. Please have an enjoyable week.
Mircea Gradu
General Chairman
2013 SAE World Congress
2
Working together,
achieving great things
When your company and ours combine energies,
SUCCESS
great things can happen.
TOGETHER
You bring ideas, challenges and
opportunities. We’ll bring powerful
additive and market expertise,
unmatched testing capabilities,
integrated global supply and an
independent approach to help you
differentiate and succeed.
SUCCESS
TOGETHER
Visit www.lubrizol.com/successtogether
to experience Success Together.
© 2013 The Lubrizol Corporation.
All rights reserved. 130004
event at-a-glance
Day/Time
Tuesday, April 16
Wednesday, April 17
8:00 a.m.
8:30 a.m.
9:00 a.m.
Grand Opening
8:30 – 9:30
Keynote
9:00 – 9:45
11:00 a.m.
FEV
Powertrain
Innovation Forum
Sessions
10:00 – 12:00
Technical Sessions
10:00 – 11:40
11:30 a.m.
Lunch on Exhibit Floor
11:30 –1:00
12:00 p.m.
12:30 p.m.
1:00 p.m.
1:30 p.m.
2:00 p.m.
2:30 p.m.
AVL
Technology Leadership
Center Sessions
1:30 – 3:30
FEV
Powertrain
Innovation Forum
Sessions
1:00 – 3:00
Technical Sessions
1:00 – 4:00
3:00 p.m.
3:30 p.m.
4:00 – 5:00
4:30 p.m.
5:30 p.m.
AVL
Center Sessions
1:30 – 3:30
SAE Annual Business Mtg
3:30 – 4:00
4:00 p.m.
5:00 p.m.
AVL
Center Sessions
10:30 – 12:30
Exhibit Open 10:00 – 6:30
10:30 a.m.
AVL
Center Sessions
10:00 – 12:00
SAE Career Fair 10:00 – 6:00
10:00 a.m.
SAE AWIM Motorized Toy Car Competition 9:00 – 2:00
9:30 a.m.
SAE Awards Ceremony
5:00 – 6:00
Attendee Networking
Reception
5:00 - 6:30
6:00 p.m.
SAE Detroit Section
Reception
5:30 – 6:30
6:30 p.m.
7:00 p.m.
SAE Detroit Section
Vehicle Event
6:30 – 8:30
7:30 p.m.
8:00 p.m.
8:30 p.m.
4
Ride and Drive Hours: Tuesday-Thursday
10:30 a.m. – 4:30 p.m.
FEV
Powertrain
Innovation Forum
Sessions
9:45 – 11:45
FEV
Powertrain
Innovation Forum
Sessions
1:00 – 3:00
Professional Development Seminars
Monday - Friday: 8:30 a.m. - 4:30 p.m.
Thursday, April 18
FEV
Powertrain
Innovation Forum
Sessions
9:45 – 11:45
1:00 –2:00
Technical Sessions
1:00 – 4:00
11:30 – 1:00
4:00 – 5:00
Chat with
the Experts
4:00 – 5:00
Attendee Networking
Reception
4:30 – 6:00
Attendee Networking Reception
4:30 – 6:00
AVL
Center Sessions
10:30 – 12:30
SAE Career Fair 10:00 – 6:00
Technical Sessions
1:00 – 4:00
SAE AWIM Jet Toy Competition 9:00 – 2:00
11:30 –1:00
Technical Sessions
8:00 – 11:40
Keynote
9:00 – 9:45
AWIM Fuel Cell Competition 9:00 – 2:00
Technical Sessions
8:00 – 11:40
Banquet
6:00 – 8:00
Afterglow
8:00-10:00
Ride-n-Drive
Sponsored
by: Hours: Tuesday-Thursday
10:30 am – 4:30 pm
5
general information
Hours of Operation
Location
Cobo Conference/Exhibition Center
(Main location, unless otherwise noted)
One Washington Boulevard
Detroit, MI 48226
Phone: 1-313-877-8777
Detroit Marriott at the Renaissance
Center (Headquarters Hotel)
Renaissance Center
400 Renaissance Drive
Detroit, MI 48243
Phone: 1-313-568-8000
Fax: 1-313-568-8146
Hotel Keycards
Sponsored by
All registrants will receive a lanyard
and a bag upon registration.
Lanyards compliments of
Bags compliments of
Registration
Inside Oakland Exhibit Hall
Hours:
Monday, April 15
8:00 a.m. – 5:00 p.m.
Tuesday, April 16
7:00 a.m. – 6:30 p.m.
Wednesday, April 17
7:00 a.m. – 6:00 p.m.
Thursday, April 18
7:00 a.m. – 6:00 p.m.
On-Site Registration Fees:
SAE Classic Member
SAE Premium Member SAE Elite Member
Non-Member Technical Program Participants*
*SAE Members *Non Members *speakers, authors, organizers,
chairs, technical paper reviewers,
sponsoring committees
Student SAE Members Student Non-Members** **Full Time College ID Required
Press***
Analyst***
Public Relations*** ***Credentials Required
Exhibitor / Sponsor Personnel $229 / day
$214 / day
$179 / day
$410 / day
Free (3 days)
$229 / day
Free (3 days)
$25 (3 days))
FREE
FREE
$229 / day
Provided
with booth/
sponsorship
purchase
All registrations include access to technical
sessions, management program, exhibit, lunch,
receptions on the exhibit floor, and networking
opportunities. NOTE: Students will receive all
entitlements noted above except lunch.
SAE 2013 World Congress Industry Leadership Coalition
3M Automotive Market Center
ABC Group
Advanced Accessory Systems
AGC Automotive
Agero
Aisin World Corporation of America
Akebono Brake Corporation
Alcoa Electrical and Electronic Solutions
Alliance of Automobile Manufacturers
Alpine Electronics of America Inc.
Alps Electric (North America), Inc.
American Axle & Manufacturing
Holdings Inc.
American Mitsuba Corporation
American Showa Inc.
Arvin Innovation, Inc.
ArvinMeritor Inc.
Asahi Glass North America
Audi AG
Autoliv North America, Inc.
Automobili Lamborghini S.p.A.
Autoneum North America, Inc.
6
AutoTech Technology Development, Inc.
AVL
BASF Corporation
Behr America Inc.
Benteler Automotive Corp
BMW AG
BMW Group
BMW Manufacturing Co., LLC
BMW of North America
BorgWarner Inc.
Bridgestone Americas
Brose North America, Inc.
Cadence Innovation LLC
CalsonicKansei North America, Inc.
Canadian Consulate - Detroit
China Automotive Technology and Research
Center (CATARC)
Chrysler Group LLC
Clarion Corporation of America
Consulate of Mexico - Detroit
Consulting4Drive
Continental Automotive Systems, Inc.
Cooper-Standard Automotive
Cummins, Inc.
Custom Sensors & Technologies (CST)
D G Technologies
Dana Corporation
Dana Holding Corporation
DASSAULT Systemes
Deere & Company
Dell Service
Delphi Corporation
DENSO International America, Inc.
Department of Defense
Detroit Metropolitan Convention &
Visitors Bureau
Donnelly Corp.
Dow Automotive
dSPACE
DuPont Automotive
Dura Automotive Systems Inc
Eaton Corporation
Eberspaecher Exhaust Technology of
The Americas (EETAM)
Hours of Operation
Currency Exchange
Charter One
Campus Martius
777 Woodward Ave
Detroit, MM 48226
(313) 965-5808
Monday - Thursday
8:00 a.m. – 5:00 p.m.
Friday
8:00 a.m. – 5:30 p.m.
$20 fee – no account needed
Call ahead to confirm specific currency
type is available for exchange.
Operations Office
Front of Oakland Hall
Monday – Thursday, April 15 - 18
7:00 a.m. – 5:00 p.m.
Seminars
Marriott Renaissance Center, Level 5
Monday – Friday, April 15 - 19
8:30 a.m. – 4:30 p.m.
To register for seminars on-site, visit
the SAE Seminar Desk at the Marriott
Renaissance Center.
Media Center
Back of Wayne Hall
Tuesday – Wednesday, April 16-17
8:00 a.m. – 6:00 p.m.
Thursday, April 18
8:00 a.m. – 2:00 p.m.
Networking Receptions
Exhibit Floor
Tuesday, April 16 – 5:00 – 6:30 p.m.
Wednesday, April 17 – 4:30 – 6:00 p.m.
Thursday, April 18 – 4:30 – 6:00 p.m.
EcoMotors International
Edscha North America
Embassy of the Kingdom of Morroco
Emitec GmbH
Emitec, Inc.
ESG Automotive, Inc.
Facton GmbH
Faurecia Exhaust Systems, Inc.
Faurecia North America
Federal-Mogul Corporation
FEV, Inc.
Fisker Automotive
Flex-N-Gate Corp.
Foamex Automotive Products Group
Focus: HOPE
FOKUS Associates LLC
Ford Motor Company
Freitag & Co.
Freudenburg-NOK G.P.
GE Automotive
GE Licensing
GE Global Research Center
SAE Fellows Reception and Dinner
Sponsored by
Marriott Renaissance Center
Ambassador Salon, 3rd Level
Monday, April 15
5:00 – 9:00 p.m.
SAE Fellow members and invited guests only
The highest grade of membership, this recognizes and honors long-term members
who have made a significant impact on society’s mobility technology through
leadership, research, and innovation.
GE Plastics
GECOM Corp./Ohi Automotive America LLC
General Motors Company
General Products Corporation
Gentex Corporation
Global Emergent
GM Powertrain
Grede Foundries Inc.
Grupo Antolin North America, Inc.
Guardian Automotive
Guardian Industries
Harvard Industries, Inc.
Hella Corporate Center USA
Henkel Adhesive Technologies
Henkel Corporation
Henniges Automotive Holdings Inc.
Hitachi Automotive Products, Inc.
Honda R & D Americas, Inc.
Honeywell International
Horiba Instruments, Inc.
Hyundai Motor America
Hyundai-Kia America Technical Center, Inc.
IAV Automotive Engineering, Inc.
IDIADA North America
IHS
Inergy Automotive Systems (USA) LLC
Infineon Technologies AG
Infineon Technologies North America Corp.
Infor Global Solutions
International Automotive Components (IAC)
International Truck and Engine Corp.
J. L. French Automotive Casting
Jacobs Vehicle Systems Inc.
Jaguar Land Rover
JATCO Ltd.
Johnson Controls Inc.
JTEKT Automotive North America
Kautex Textron North America
Keihin North America, Inc.
Kevin J. Alder
Key Plastics, LLC
Key Safety Systems Inc.
Kongsberg Automotive
KOSTAL Kontakt Systeme, Inc
continued on next page
7
general information
On-Site Services (all located in Cobo Center)
Charging Station
Mini-Lounge
Sponsored by
Charging Station Mini-Lounge
for Personal Electronics
Front of Wayne Exhibit Hall
Open during registration hours.
Charge your electronic devices.
Coat Check
Wayne Hall Lobby
Tuesday, April 16
7:00 a.m. – 7:30 p.m.
Wednesday, April 17
7:00 a.m. – 9:30 p.m.
Cobo Hospitality / Business
Services
Thursday, April 18
7:00 a.m. – 11:00 p.m.
Saturday, April 13
12:00 – 4:00 p.m.
Concierge Club (by invitation only)
Monday, April 15
12:00 – 4:00 p.m.
Tuesday – Wednesday, April 16 – 17
7:30 a.m. – 5:30 p.m.
Tuesday – Thursday, April 16 - 18
8:00 a.m. – 5:00 p.m.
Phone: 313-877-8290
Fax: 313-202-1833
Thursday, April 18
7:30 a.m. – 12:00 p.m.
Cobo Center Lobby
Concierge Club
VIP Check- In
Sponsored by
®
Services Available: Copying, faxing,
on-site computer workstations, shipping
services, restaurant reservations, airport
shuttles/ transportation, cell phone
rental, office supplies, etc.
Room W1-55
Cyber Café / Email Stations
Oakland Hall Lobby
Open during registration hours
SAE 2013 World Congress Industry Leadership Coalition continued
Kostal North America
KSPG
Lear Corporation
LG Chem
Linamar Corp.
Magna International
Magneti Marelli Powertrain USA, LLC
MAHLE Filter Systems North America, Inc.
MAHLE Inc.
MAHLE Technology, Inc.
Mando America Corp
MANN+HUMMEL GmbH
MANN+HUMMEL USA, INC.
MarkIV Automotive
MathWorks
MB-technology NA LLC
Mentor Graphics
Metaldyne Corporation
Michelin North America Inc.
Michigan Economic Development
Corporation
8
Millerschin Group
Ministry of China
Mitsubishi Electric Automotive America, Inc.
Mitsubishi Motors R & D of America, Inc.
Mollertech LLC
Moroccan Investment Development Agency
Motor & Equipment Manufacturers
Association
Motorola - Automotive
MSC Software
Navistar, Inc.
Neaton Auto Products Manufacturing Inc.
Nemak
NHK International Corp.
Nissan Technical Center North America, Inc.
Nissin Brake Ohio Inc.
North American Lighting
NSK Americas
NTN Bearing Corporation of America
OESA
OMMC (Ohio Module Manufacturing
Co., LLC)
Omron Automotive Electronics Inc.
Osram Sylvania Automotive Lighting Inc.
P3 North America Inc.
Panasonic Automotive Systems Co.
of America
Panoz Motor Sports Group
Parker Hannifin Corp.
Penske Corporation
Perfect Costing Solutions
PGW
Philips Automotive Lighting, N.A.
Pilkington Automotive Limited
Pioneer Automotive Technologies Inc.
Plastic Omnium
PPG Industries
PPG Kansai Automotive Finishes
Preh, Inc.
Reliance One
Remy International Inc.
First Aid Services
Room W-1 (Inside Wayne Hall)
Tuesday, April 16
7:00 a.m. – 7:00 p.m.
Wednesday, April 17
8:00 a.m. – 6:30 p.m.
Thursday, April 18
8:00 a.m. – 10:00 p.m.
Food Courts
Back of Wayne/Oakland Exhibit Halls
Networking Lounges on
Exhibit Floor
Networking Lounges
Sponsored by
Booth #131 (Wayne Hall – Back left on
the Exhibit Floor)
Booth #201 (Wayne Hall- Front left on the
Exhibit Floor)
Booth #1201 (Oakland Hall – Front right
on the Exhibit Floor)
Booth #1237 (Oakland Hall – Back left on
the Exhibit Floor)
Open during exhibit hours
Tuesday – Thursday, April 16-18
11:00 a.m. – 2:00 p.m.
Housing Changes?
If calling during regular business hours
9:00 a.m. – 8:00 p.m. Eastern time
please call (800) 847-5810 toll free or
(801) 505-4138 International. If calling
outside regular business hours please call
(801) 505-4609.
Exhibitor Services
Right Side of Oakland Hall
Ricardo Inc.
Robert Bosch LLC
Roush
SAE Detroit Section
SAE International Automotive Headquarters
SAE International World Headquarters
Saturn Electronics & Engineering Inc.
Schaeffler Group USA, Inc.
SEMCOG (Southeast Michigan Council
of Governments)
Shape Corp.
Shiloh Industries Inc.
Siemens
Siemens PLM Software
SKD Automotive Group
SKF USA, Inc.
SM Automotive Consulting, LLC
Southwest Research Institute
Specialty Equipment Market Association
(SEMA)
Stanley Electric U.S. Co. Inc.
SAE Mobility History Committee’s
display will be in keeping with the
Congress theme, Achieving Efficiency.
The display will include materials of
historical interest and two vehicles;
• 1931 Plymouth Roadster
• 1963 Lotus Elite
While visiting World Congress, please
visit the display located outside of
Wayne Hall.
Stoneridge, Incorporated
T. Ryan Consultants LLC
TAG Holdings, LLC
TATA Technologies
Teksid Aluminum
Tenneco Automotive
Tesla Motors
TG Fluid Systems USA Corporation
The Goodyear Tire & Rubber Company
The Lubrizol Corporation
The Timken Company
The University of Toledo
ThyssenKrupp Budd Co.
TI Automotive, Ltd.
TK Holdings, Inc.
Tower International
Toyoda Gosei North America Corporation
Toyota Boshoku Corp
Toyota Motor Engineering & Manufacturing
North America
Toyota Motor Sales, USA, Inc.
1963 Lotus Elite
Toyota Technical Center, U.S.A., Inc.
TRAM Inc.
Trelleborg Automotive
TRW Automotive
TS Tech North America
UGN Inc.
University of Michigan
University of Washington
US Army TARDEC-NAC
US Manufacturing Corp.
USCAR
Valeo Inc.
Visteon Corporation
Volkswagen
Volkswagen of America, Inc.
Volvo
Woodbridge Group
Yazaki North America, Inc.
ZF Group North American Operations
9
general information
Emergency Hotline
1-800-581-9295
In the event of an emergency or a
major disruption to the schedule
of events at the SAE 2013 World
Congress, attendees and exhibitors
may call this number to receive
further information about the
resumption of this event. Updates
will also be provided via the SAE
website at www.sae.org.
SAE International
World Headquarters
400 Commonwealth Drive
Warrendale, PA 15096-0001 USA
Phone: 1-724-776-4841
Fax: 1-724-776-0790
Customer Service
1-877-606-7323 (toll free U.S.
and Canada)
1-724-776-4970
www.sae.org
[email protected]
Automotive Headquarters
755 W. Big Beaver Rd.
Troy, MI 48084
Phone: 1-248-273-2455
Fax: 1-248-273-2494
On-Site Services (all located in Cobo Center)
People Mover
Monday – Thursday
6:30 a.m. – 12:00 a.m.
Front of Macomb Hall in M3 (Macomb
Lobby)
Friday
6:30 a.m. – 2:00 a.m.
Saturday
9:00 a.m. – 2:00 a.m.
Sunday
12:00 p.m. – 12:00 a.m.
Security is of continued
importance. Your patience
and understanding is
appreciated as we do
everything possible to secure the event.
People Mover Passes can be obtained
at each People Mover Station for a fee
of $0.75 per ride.
Restaurant Services
See Cobo Hospitality / Business
Services or refer to link http://www.
visitdetroit.com/metro-detroit-dining for
a listing of restaurants in Detroit.
• On SAE “Virtual” Book Store
• Theater presentations
• Demonstrations of exciting new
publishing products
• Promotions and giveaways!
• A first-hand look at SAE’s new mobile
application
As the publishing leader in our industry,
SAE is excited to share information
on topics, trends and tools affecting
the mobility industry, today! Visit us
during World Congress – located near
Registration!
No one under the age of 16 is permitted
on the exhibition floor unless part of
an SAE/AWIM sponsored school tour
planned and pre-arranged by SAE.
Near SAE Registration – inside
exhibit hall
Tuesday
7:00 a.m. – 6:30 p.m.
Wednesday
7:00 a.m. – 6:00 p.m.
Thursday 10:00 a.m. – 6:00 p.m.
The Technology Center will include:
10
Photography and audio video recordings
are NOT permitted in the Exhibit Hall. Also, as a courtesy to presenters and
audience members, please turn off all
cell phones and pagers before entering
technical session rooms.
SAE International Technology
Center NEW
Designed to enhance the attendee
experience by providing an interactive
hands-on forum to learn about SAE new
products and services that are critical to
effective workflow.
FISITA Patronage
Security
Print on Demand Kiosks
SAE Technical Papers
Utilize this service to instantly
purchase SAE technical session
papers. If you would like to leave
Cobo Center with a copy of a
technical paper in your hand, then
use these convenient kiosks to
purchase and print SAE technical
papers. Located in W2-60 and
near the Registration area in
Oakland Hall, these kiosks will
allow you to select and pay for the
papers and retrieve them from the
registration area.
We make it easy for you to take
SAE technical information with you!
Shuttle Services
Technology Lounges
The shuttle will run a continuous loop at ten
D3-19 – Safety/Testing
minute intervals from the Motor City Lobby
of the Marriott Renaissance Center to Cobo. D0-01 A&B – Electronics/Integrated Design
& Manufacturing/Materials
Tuesday, April 16
W2-60 – Powertrain/Propulsion/Emissions/
6:00 a.m. – 7:30 p.m.
Environment/Sustainability
Wednesday, April 17
7:00 a.m. – 5:30 p.m.
6:00 a.m. – 9:00 p.m.
Electronics/Integrated
Design & Manufacturing/
MaterialsTechnology Lounge
Sponsored by
Thursday, April 18
6:00 a.m. – 11:00 p.m.
Guests staying at the Courtyard Marriott,
Atheneum, and the Hilton Garden Inn may
use the People Mover. VISIONARY ENGINEERING
Automakers are facing increased fuel economy COLLABORATIVE
requirements, and DENSO can help. Our idle stop/start
technology is just one example: our starter, SUPPORT
lithium-ion battery pack and cold storage evaporator
can be integrated to improve vehicle efficiency.
DENSO focuses on our customers’ needs to provide
innovative engineering solutions. We deliver advanced
technology, systems and components.
w w w. d e n s o c o r p - n a . c o m
11
general information
DOWNTOWN DETROIT PARKING
City Of Detroit Municipal Parking Deparment Parking Facilities
Listed below are recommended parking facilities for all exhibitors of the SAE 2013 World Congress. Parking will be handled
on a first-come, first-served basis. As long as spaces are available, attendees will be able to park and pay the current
rate for the day. These rates do not include reserved parking. Please note that the parking facilities do not accommodate
overnight parking.
Congress Street Garage
Washington Garage
467 W Congress
Detroit, MI 48226
6:00 a.m. – 11:00 p.m. Monday – Friday
Saturday, Sunday and holidays as needed
Flat rate: $10
Cobo Roof Parking Deck
625 W Congress
Detroit, MI 48226
Ford Underground Garage
12
30 East Jefferson
Detroit, MI 48226
Flat rate: $10
Flat rate: $10
Millennium Garage
432 West Congress
Detroit, MI 48226
Maximum rate: $15
For additional parking information, or
to reserve parking, please contact:
Municipal Parking Department
1600 West Lafayette
Detroit, MI 48216
Phone: 313-221-2500
special events and networking opportunities
Opening Ceremonies
AVL Technology Leadership Center, W1-52
8:30 – 9:30 a.m.
Welcome:
Jeff Hemphill
Tuesday
April 16
Chief Technical Officer,
Schaeffler Group USA Inc. and
SAE International
Automotive Vice President Helmut List
Chairman & CEO
AVL List GmbH
The Honorable
Rick Snyder
Governor of Michigan
Mircea Gradu
Vice President Powertrain,
Transmission & Driveline Engineering,
Head of Virtual Analysis,
Chrysler Group LLC
SAE 2013 World Congress General Chair
Featured Speaker:
Mary D. Nichols
Chairman
California Air Resources Board
14
SAE Foundation Lounge
Room W2-57
8:00 a.m. – 5:00 p.m.
You’re invited! Friends of the SAE Foundation are invited to visit the SAE Foundation
Lounge. Please stop in to enjoy light refreshments, good conversation and a quiet
workspace throughout the day.
Tuesday
April 16
AWIM International Motorized Toy Car
Competition (2nd Annual)
Detroit Hall
9:00 a.m. – 2:00 p.m.
Motorized Toy Car
Sponsored by
Middle School students (in Engineering Design Teams of three or four) compete in 15
degree ramp 30 degree Ramp, speed, and obstacle course events. SAE International
will host the 2nd annual International Motorized Toy Competition through the gracious
sponsorship of Honeywell and Kia.
SAE Detroit Section Student Exhibit Competition
Wayne Hall
Judging: 10:00 a.m. – 12:30 p.m.
SAE Detroit Section will host the Annual Student Exhibit Competition during SAE 2013 World
Congress. The exhibits showcase SAE collegiate chapter activities and projects. It is a great
opportunity for automotive manufacturers and suppliers, as well as alumni, to learn more about
the innovative engineering efforts in which SAE collegiate chapters worldwide are engaged.
SAE Detroit Section Student
Exhibit Competition
Sponsored by
Student Exhibits detail the novel design concepts, engineering analyses, and manufacturing
methods employed to construct SAE collegiate design competition vehicles. Exhibits will be on
display all week. Cash prizes will be awarded to the top three schools. Come see for yourself the
remarkable new technologies these enthusiastic and creative students have on display.
SAE Detroit Section High School Poster Competition
Wayne Hall
Local high school students incorporated the SAE 2013 World Congress theme “Achieving
Efficiency” into their posters. Judging was based on originality, artistic excellence, aesthetic
effect and relevance to the theme. The top ten posters will be on display all week.
SAE Detroit Section
Poster Competition
Sponsored by
Faculty Advisors & Collegiate Design Series Team Advisors Meeting
Detroit Marriott at the Renaissance Center
Mackinac West Ballroom (Level 5)
3:30 - 4:45 p.m.
All faculty attending Congress are encouraged to attend.
SAE Annual Business Meeting
FEV Powertrain Innovation Forum (Room W1-54)
3:30 p.m.
All SAE Members are encouraged to attend as SAE President, Donald G. Hillebrand, addresses
the members. David L. Schutt, Chief Executive Officer will share a 2012 year-end report, and
Gregory L. Bradley, Secretary, will announce the 2013 Board of Directors.
15
Tuesday
April 16
SAE International
Officers - 2013
Donald G. Hillebrand, PhD
President
Frank O. Klegon
2012 President
Daniel M. Hancock
2014 President Nominee
Gregory E. Saunders
Vice President – Aerospace
Jeff Hemphill
Vice President – Automotive
Bharat Vedak
Vice President – Commercial Vehicle
Ronald G. Rath
Treasurer
Robert Ireland
Assistant Treasurer
David L. Schutt, PhD
Chief Executive Officer
Gregory L. Bradley
Secretary
DIRECTORS
Paul “Scooter” Brothers
Susan Collet
David J. Gorsich, PhD
Richard Greaves, CEng
Klaus Hoehn, PhD
Arun Kumar Jaura, PhD
Yoshio Kawakami
Louis Kratz
Sandra Krug, PhD
Patrick Leteinturier
Sun Wing Lui, PhD
Charon Morgan
Srinivas R. Srinath, PhD
David Vasquez
SAE Awards Ceremony: Honoring Excellence
FEV Powertrain Innovation Forum, W1-54
5:00 - 6:00 p.m.
Join SAE in honoring excellence in engineering as Donald Hillebrand,
SAE International President, recognizes more than 90 outstanding
engineers and educators for their exceptional accomplishments
and contributions to the mobility industry. We hope you will join
us in honoring your peers by recognizing their accomplishments.
Admission to the Awards Ceremony is provided to all conference
attendees, award presenters, and guests of the award recipients.
Donald G.
Hillebrand
SAE President
Admission to the Awards Ceremony is included for anyone whose badge is valid for
Tuesday conference registration.
For additional information about SAE’s awards, please visit www.sae.org/awards.
Mr. Arnold Siegel is the 2013 SAE International Medal of Honor recipient. He is being recognized
for his more than 50 years of dedicated and meritorious service to SAE International and the
SAE Foundation.
He helped initiate SAE International’s entry in the automotive safety field and contributed to
many SAE standards and conferences. Mr. Siegel is a pioneer in the field of automotive safety.
The Medal of Honor, established in 1996, is presented annually and is SAE International’s most
prestigious award. The award recognizes an SAE International member for his or her unique and
significant contributions to SAE International and is funded through the SAE Foundation. Please
join SAE International as we congratulate Mr. Arnold Siegel for his outstanding accomplishments.
Attendee Networking Reception
Exhibit Hall
5:00 – 6:30 p.m.
DON’T FORGET TO VOTE!
Best of the Best Booth Awards
Kiosks located in the front Oakland Hall.
The Best of the Best Booth Awards recognize exhibitors with the most
innovative technology.
Please vote for the most innovative exhibitor in each of the following categories:
• Poster Display
• 10x10 Booth
• 10x20 Booth
• 20x20 Booth
• Most Innovative Booth Overall
Voting will close Wednesday, April 17 at 6:00 p.m., so be sure to visit the voting
kiosks in the front of Oakland Hall before that time.
Best of the Best Award winners will be recognized during the World Congress
Annual Banquet
16
You want cutting-edge technical news,
innovative products and services, immediate
connections to like-minded peers…
GET ALL THIS AND MORE: Take 5-10 minutes to
log-into your MySAE account at www.sae.org/servlets/login
and update the ‘My Profile’ tab and the ‘Technology &
MySAE Preference’ tab.
You will need your user ID and password to begin.
If you don’t know it, contact customer service at:
SAE Customer Service
Toll-free: 1-877-606-7323 (U.S. and Canada)
Phone: 1-724-776-4970 (Outside U.S. & Canada)
Fax:
1-724-776-0790
Email: [email protected]
Conference producer, educational provider, and technical publisher —
SAE International offers one of the world’s largest libraries of intellectual
property focused on technology within the mobility industry. Make sure
that you continue to get the information you want and need from SAE by
updating your profile today!
P120079B
WEDNESDAY
April 17
Premium and Elite
Member Breakfast
Sponsored by
SAE Members: Attend these TWO World Congress
networking activities just for you!
Premium and Elite Member Breakfast
Room W1-51
7:00 – 8:30 a.m.
New Member Welcome Coffee Break
All SAE Members who joined SAE this past year are welcome to attend
Exhibit Hall, Booth 1201
2:30 – 3:30 p.m.
JetToy Competition
Sponsored by
AWIM International JetToy Competition (7th Annual)
Detroit Hall
9:00 a.m. – 2:00 p.m.
500+ Elementary age students (in Engineering Design Teams of 4) compete in
distance, accuracy, weight carrying and timed events. SAE International will host this
competition through the gracious sponsorship of Johnson Controls, Bosch, Kia, TRW
& Mercedes Benz.
SAE Detroit Section Vehicle Event
Featuring the 2014 Jeep® Grand Cherokee EcoDiesel
W1-51 & W1-52, Cobo Center
5:30 p.m. – Social Hour
6:30 p.m. – Dinner
7:30 p.m. – Program
Don’t miss the popular SAE Detroit Section Vehicle Event featuring 2014 Jeep®
Grand Cherokee EcoDiesel. Ticket holders are invited to attend the social hour
prior to the meeting, providing the perfect opportunity to interact with engineering
professionals and peers.
SAE Detroit Section
Social Hour
Sponsored by
SAE Detroit Section is the largest Section of SAE International with over 9,000
members, from southeastern lower-Michigan, including Ann Arbor, Jackson, and
Toledo. The event is open to both industry and SAE members.
Please note, this event is not included with your SAE 2013 World Congress
registration. Tickets must be purchased by 5:00 p.m. April 15 via the SAE Detroit
Section website at www.sae-detroit.org. Tickets are $40/SAE member, $55/nonmember, and $20/SAE student member or $500 for a reserved Sponsor Table of ten.
Onsite tickets will not be available.
Networking Reception
Exhibit Hall
4:30 – 6:00 p.m.
18
October 1-3, 2013
Donald E. Stephens
Convention Center
Rosemont, Illinois USA
ON-HIGHWAY • OFF-HIGHWAY • DEFENSE
www.sae.org/comvec
Executive Leadership Provided by:
P135007
AWIM International Fuel Cell Competition (3rd Annual) THURSDAY
April 18
25
years
Fuel Cell Event
Sponsored by
Detroit Hall
9:00 a.m. – 2:00 p.m.
Middle School students (in Engineering Design Teams of 3 or 4) compete in
distance, accuracy, weight carrying and speed events. SAE International hosts
this competition through the gracious sponsorship of the General Motors
Foundation and Kia.
of
Pre-Banquet Industry Networking Reception
Exhibit Hall
4:30 – 6:00 p.m.
NEW for SAE World Congress
Instantly access SAE International documents from your iPad!
Use the app to access Congress papers during technical presentations.
The MyLibrary App makes all of the industry-leading standards, technical
papers, and e-books purchased from SAE’s website (www.sae.org) available
to you when and where you need them, without having to go online.
How it works: When you purchase a document through the SAE store, the
PDF is automatically placed in your online MyLibrary account (requires initial,
free registration on sae.org), where it can be accessed at any time. The
MyLibrary App allows you to easily browse your purchased documents on
your iPad and download them to the reader of your choice (e.g., iBook).
Download the free MyLibrary App today from iTunes to see how easy it is to
access and manage your SAE International documents!
20
SAE 2013 Annual Banquet
W1-51/52
6:00 p.m.
THURSDAY
April 18
Featuring:
Sergio Marchionne
Chairman and Chief Executive Officer, Chrysler Group LLC
Chief Executive Officer, Fiat S.p.A.
Sergio Marchionne is Chairman and CEO of Chrysler
Group LLC, CEO of Fiat S.p.A., as well as Chairman of
Fiat Industrial S.p.A. and CNH Global N.V. (CNH).
Marchionne leads Fiat’s Group Executive Council (GEC), the highest executive decisionmaking body within Fiat outside of its Board of Directors. The GEC is responsible for
reviewing the operating performance of the businesses, setting performance targets
and making key strategic decisions and investments for the Group.
Honored Guest Reception
Sponsored by
Marchionne is President of the board of directors of the European Automobile
Manufacturers Association (ACEA) for 2013. Marchionne also serves on several boards
including Exor S.p.A, Philip Morris International Inc., Peterson Institute for International
Economics, Italian Branch of the Council for the United States and Italy and is the
Chairman of SGS SA. He is a permanent member of the Fondazione Giovanni Agnelli.
Marchionne is a barrister, solicitor and chartered accountant. He obtained a Bachelor of
Arts with a major in Philosophy and minor in Economics from the University of Toronto
and a Bachelor of Laws from Osgoode Hall Law School at York University in Toronto.
Marchionne also has a Master of Business Administration and a Bachelor of Commerce
from the University of Windsor (Canada). Marchionne also holds the honor of Cavaliere
del Lavoro.
Afterglow
Immediately following the banquet for
networking over dessert, a nightcap
and live entertainment
Room W1-54/55
Marchionne was born in Chieti (Italy), and has dual Canadian and Italian citizenship.
Presentations by:
Donald G. Hillebrand
SAE President
Director, Argonne National Laboratory
Join Master of
Ceremonies John
McElroy as we
honor this year’s top
OEM and supplier
executives.
Dress is business
attire. Each full table purchased
includes one bottle of red and one
bottle of white wine. Tickets are
priced at $150 each or $1500 per
table. Check SAE registration desk
for availability.
Remarks by:
Mircea Gradu
Transmission & Driveline Engineering,
Chrysler Group LLC
SAE 2013 World Congress General Chair
21
Chats with the Experts are designed to encourage small groups to explore subjects of interest to them, pose questions,
and share ideas and practical solutions in an informal setting. The subject matter experts will provide brief opening
statements on the topic to kick things off and will facilitate an interactive dialogue. Chats with the Experts will feature
additional technology topics such as safety, powertrain controls, and hybrid and electric vehicles.
Electronics
Room D0-07B
Tuesday, April 16
4:00 – 5:00 p.m.
Organized by IEEE Future
Directions Committee
Introducing Wireless Charging
Technology for Electrical Vehicles
Mark Klerer, Qualcomm
Room D0-02B
Tuesday, April 16
4:00 – 5:00 p.m.
Room D0-02B
Wednesday, April 17
4:00 – 5:00 p.m.
Why Industrial Companies have
Problems with Recalls, Quality, and
Reliability, and Less Profit than
Planned. The Way for Improvement
this Situation
Todd Gross, Johnson Controls
Lev Klyatis, Sohar Inc.
Bryan Dodson, SKF
Making Design Decisions Involving
Multiple Performance Attributes
Efstratios Nikolaidis, University of Toledo
Mohamed El-Sayed, Kettering University
Vijitashwa Pandey, Oakland University
Zissimos Mourelatos, Oakland University
Emissions/Environment/ Sustainability
Room W2-60
Thursday, April 18
1:00 – 2:00 p.m
LD/HD Future Emission Technologies
Timothy Johnson, Corning
David Brooks, Ricardo
Drew Kodjak, International Council On
Clean Transport
Paul A. Machiele, US EPA
Kevin D. Sisken, Daimler
Qingyuan Song, Foton
22
continued on next page
continued from previous page
Powertrain
Room W2-66
Tuesday, April 16
4:00 – 5:00 p.m.
Propane Autogas – The Other Gaseous Fuel
Alan McEwan, Propane Education &
Research Council
Room W2-69
Wednesday, April 17
4:00 – 5:00 p.m.
LD/HD Control, Calibration, and OBD
Steve Majkowski, American Power Group Inc
Zoran Filipi, Clemson University
William Fedor, Delphi Powertrain
Kody Klindt, IAV Automotive
Guoming Zhu, Michigan State University
Room W2-68
Tuesday, April 16
4:00 – 5:00 p.m.
Communicating Lubricant
and Hardware requirements,
limitations and mutual performance
expectations; Are we getting our
specifications right?
Timothy Newcomb, BorgWarner
Christopher S. Cleveland, Afton
Chemical Corp.
William Haynes, BorgWarner
Transmission Systems
Martin Theil, BP Europa SE
Chintan Ved, Ford Motor Co.
Richard J. Vickerman, The Lubrizol
Corporation
Joe Walker, Freudenberg-NOK
Sealing Technologies
Safety/Testing
Room D3-19
Wednesday, April 17
4:00 – 5:00 p.m.
Motorsports
David A. Finch, Raetech Corp.
Raymond Leto, TotalSim LLC
Wiley R. McCoy, McLaren Performance
Technologies
John Melvin, Tandelta
J. Kirk Russell, Retired
H. Robert (Bob) Welge, Robert’s
Engineering Development
23
Career Fair
SAE Career Fair
The Career Fair at the SAE 2013 World Congress will provide unique
opportunities for engineers and professionals to explore available jobs,
network with exhibiting companies and learn valuable career tips.
Career Fair
Cobo Center Lobby – Outside Macomb and Detroit Halls
Tuesday - Wednesday, April 16-17
10:00 a.m. – 6:00 p.m.
Resume Critique Clinic
SAE Career Fair
Wednesday, April 17
10:00 a.m. – 12:00 p.m.
Have your resume critiqued by a professional and receive tips on
how to advertise your skills in the right format. Preferred appointment
times are available to SAE members. Stop by the Career Fair to sign
up for a time slot. Critique will be conducted by ASG Renaissance
and Transformational Leaders Intl.
Career Development Session
Room D3-26
Wednesday, April 17
1:00 – 3:00 p.m.
“CareerWise for Engineering Professionals: Transforming
Your Talents into the New World of Work”
Career development is no longer something you focus on in your
twenties and are set for life, it is ongoing and constant. New
technologies, globalization and the world-wide competition for jobs
demand that we continue to grow our skills and knowledge throughout
our life. This session will provide you with tools to help you meet this
demand as an engineering professional. Participants will create a
personal mission statement and set career goals, identify the best way
to research new opportunities and build their network while also crafting
a personal brand with consistent messaging. Presented by Caryn L.
Mateer and Kathleen Riley, Transformational Leaders, Intl.
Attendance to the Career Fair activities is free for engineering
professionals. Please proceed to the Career Fair in the Lobby outside
Macomb and Detroit Halls. It is not necessary to register prior to
attending the Career Fair.
24
Career Fair Exhibiting Companies
(as of 3/15/13):
Advantage Resourcing
Aerotek
Aisin
ASG Renaissance
BorgWarner Inc.
Bosch
CalsonicKansei North America
d. Diversified Services
Delphi
Engineering People
ESG Automotive
Experis Engineering
Grupo Antolin North America
GTA Professional Staffing
HELLA
Honeywell-Turbo Technologies
HUSCO Automotive
Hyundai America Technical Center, Inc. (HATCI)
KSPG
Kyyba
LHP Software, LLC
Lubrizol Corporation
Magna International
MAHLE
Ricardo, Inc.
RLE International
Satyam-Venture Engineering Services Pvt Ltd
Saudi Aramco
Sumitomo Electric Wiring Systems, Inc.
Toyota Motor Engineering & Manufacturing, Inc.
University of Michigan-Dearborn College of
Engineering & Computer Science
Volkswagen Group of America, Inc.
Walsh College
Yanfeng USA Automotive Trim Systems, Inc.
THE CITY THAT DRIVES AMERICA
STAYS ON TOP OF THE AUTO INDUSTRY
With comprehensive coverage
from WWJ Newsradio 950’s
Auto Experts John McElroy and Jeff Gilbert
25
Ride and Drive
Ride and Drive
Macomb Hall
Tuesday – Thursday, April 16 – 18
10:30 a.m. – 4:30 p.m.
This distinctive event has become a must attend event at the SAE World Congress.
In 2012, 1,600 riders were eager to test the latest vehicle technologies.
You will have the opportunity to experience first-hand the latest features and
technology presented by the automotive industry. By attending the SAE World
Congress you are given the opportunity to learn about the latest technology
developments. The Ride and Drive experience is integrated with the technical
sessions and designed to give you a real world experience. The Ride and Drive is a
powerful learning tool and has become a popular attraction, so please plan your day
to include this valuable highly interactive experiential program.
Vehicles provided by multiple OEMs and suppliers will showcase innovative
technologies such as advanced propulsion, recent launches, and specialty vehicles.
Vehicles may be test driven by attendees on a 10 minute course. This is one
aspect of the SAE World Congress that you won’t want to miss!
OEMs and suppliers participating as of March 15 2013:
• Chrysler – featuring the Dodge Dart, Jeep Grand Cherokee Diesel, Fiat 500L,
Fiat BEV
• Ford – featuring the 2013 Fusion, CMAX Energi, CMAX HEV, Focus BEV • Magna Powertrain – featuring 2013 Ford Focus, Kia Sportage, LandRover LR2
• General Motors – Cadillac ATS Sedan
• Honda—featuring the 2013 Honda Accord EX, 2014 Honda Accord PHEV
• Nissan—featuring the Nissan Sentra
• Robert Bosch LLC – 2012 VW Tiguan TDi, 2013 VW Beatle TDI
(Vehicles subject to change)
*Ride and Drive is open to all registered attendees of SAE 2013 World
Congress. Participants must be 18 years of age, sign a participation waiver
and provide proof of a valid driver’s license.
SAE Registration Acknowledgement
I understand and agree that my registration enables participation in the SAE 2013 World Congress Ride
and Drive and is a revocable license. SAE International has the right to terminate my participation in
the Program at any time if, in the sole judgment and determination of SAE International or the program
administration, such action is reasonably warranted by the circumstances including but not limited to
lewd, drunken or illegal activity or misconduct. SAE International may take such action and request me
to vacate the premises without reimbursement, exchange, refund or payment of any other costs incurred
by me with regard to the Program. SAE International reserves the right to seek reimbursement for willful
damage to and/or loss of property of SAE International.
Please be aware that your badge will be scanned by the Ride and Drive participating companies. Your information will be shared with the companies in the same manner as if your badge was
scanned in an exhibitor booth.
26
What’s inside
Management
PROGRAMS
Tuesday
Wednesday
Thursday
29-33
34-37
38-39
27
Why You Should Become
an SAE Member
•
•
•
•
•
Global networking through SAE events, volunteering, and EngineerXchange®
Unlimited Career Advice
Professional Development, Leadership, and Recognition opportunities
Access to original, first-of-its-kind industry studies
Numerous technology resources at your fingertips: SAE conferences, section events,
technical papers, magazines, technical standards, and books
• Local and national volunteer opportunities
• Discounts on SAE products and services
www.sae.org/membership
P120402
MANAGEMENT PROGRAMS
Opening Ceremony
Tuesday
April 16
8:30 – 9:30 a.m.
Welcome
Jeff Hemphill
Helmut List
Chief Technical Officer,
Schaeffler Group USA Inc.
and SAE International
Automotive Vice President Chairman & CEO
AVL List GmbH
The Honorable
Rick Snyder
Mircea Gradu
Governor of Michigan
AVL Technology
Leadership Center
Transmission & Driveline
Engineering,
Chrysler Group LLC
General Chair
Featured Keynote Speaker
Mary D. Nichols
Chairman
California Air
Resources Board
29
TECHNOLOGY leadership Center
Tuesday
April 16
10:00 a.m. – 12:00 p.m.
Predicting Desire
What will drive consumer purchase decisions of the future? Efficient cost-effective
investments must be made far in advance of when consumer trends and priorities are
obvious. How should auto engineers think differently about what future consumers
around the world will value? This panel will discuss market segmentation, consumer
priorities, drivers of customer satisfaction, business models and their impact on hot
future vehicle features and functions.
Moderator:
Sandy Stojkovski
President, Scenaria, Inc. An AVL Group Company
Panelists:
Peter Coffee
Vice President & Head of Platform Research, CTO for Automotive Industry,
salesforce.com inc.
Ralph Gilles
President & CEO - SRT Brand & Motorsports & Senior Vice President, Product
Design, Chrysler Group LLC
Michael O’Brien
Vice President, Corporate Planning & Strategy, Hyundai Motor America
John Waraniak
Vice President, Vehicle Technology, Specialty Equipment Market Association
(SEMA)
30
Powertrain Innovation Forum
10:00 a.m. – 12:00 p.m.
New Fuels and High-Tech Innovations: Are Engine Controls
and the CAN Bus up to the Challenge?
Tuesday
April 16
As powertrain technology evolves, we’re beginning to see a future world of complicated
and highly engineered solutions to meet a variety of market needs. Fuel flexibility,
downsized and highly boosted engines, EV’s and Range Extenders, just to name a
few all present major challenges in terms of greater functional complexity, distributed
architectures, and component sharing. Engine controls are becoming increasingly
complex and CAN data bus loading is becoming difficult to manage. Increasing
complexity and data management generates concern about functionality and
transmission/ receipt of data within required time window. Engine controls and data bus
experts from the automotive industry will discuss the challenges and present a forward
look at emerging solutions.
Moderator:
Dean Tomazic
Vice President Light-Duty Powertrain and Vehicle Engineering, FEV, Inc.
Panelists:
David E. Helton
Chief Engineer, Gasoline Engine Management Systems, Delphi Powertrain
Systems, Delphi Corporation
Daniel Nicholson
Executive Director - Global Powertrain Driveability, Calibration & Verification,
Gregory Weber
Director, Powertrain Controls Engineering, Chrysler Group LLC
Philip Yuhasz
Director of Controls & Calibration, Ford Motor Company
31
Tuesday
April 16
1:30 – 3:30 p.m.
Driver Distraction Regulation and Autonomous Driving
NHTSA published “Visual-Manual Driver Distraction Guidelines for In-Vehicle Electronic
Devices” and it is moving through the regulatory process. The automotive industry has
highlighted issues including “Per Se” lock-outs, the importance of systems integration,
nomadic devises and voice activated controls, and ultimately autonomous driving. When
will this technology be available, how much will it cost, and will it help or hinder the problem
of a distracted driver? In addition, the fundamental issue is how can the driver and vehicle
“Connect with Safety?” How can industry, government and regulatory groups work together
on solutions which provide value to society? This is the challenge and focus of the panel.
Moderator:
Jeffrey J. Owens
Chief Technology Officer & Senior Vice President, Delphi Automotive
Panelists:
Christopher Borroni-Bird
Vice President, Strategic Development, Qualcomm Inc.
Jay Joseph
Senior Manager, Product Regulatory Office, American Honda Motor Co., Inc.
Kazuoki Matsugatani
Director, Corporate R&D Div. 3, DENSO Corporation
Christian Schumacher
Head of Advanced Driver Assistance Systems, NAFTA, Continental Automotive
Systems N.A.
Peter F. Sweatman
Director, University of Michigan Transportation Research Institute
Robert K. Yakushi
Director, Product Safety, Environmental, Nissan North America, Inc.
32
1:00 – 3:00 p.m.
Start-Stop is Coming to North America, But Will it Start or
Stop Sales?
Tuesday
April 16
Start-stop technology may offer significant internal combustion engine efficiency
improvements at a modest cost. But a variety of engineering challenges exist when
integrating systems into a vehicle such as battery performance, base engine control
changes, calibration complexity, reliability, safety/redundancies, NVH and driver
perception. This session with look at how OEM’s and suppliers are addressing these and
other issues and provide an updated prognosis of the issues and solutions affecting North
American start-stop systems product launches.
Moderator:
Francis M. Fodale
Director, Powertrain Integration, NAFTA Powertrain Engineering, Fiat-Chrysler
Group LLC
Panelists:
Scott Dahl
Regional President, Starters Motors & Generators Division, N.A., Robert Bosch
LLC
Michel A. Forissier
Marketing, Research & Development Director, Valeo Powertrain Systems
Mazen Hammoud
Chief Engineer, Electrified Powertrain Systems, Ford Motor Company
Robert Martin
Director, Engine Electric Group, DENSO International America Inc.
Mark Rakoski
Executive Director, Sales & Engineering, Mitsubishi Electric Automotive
America, Inc.
33
9:00 a.m.
Wednesday
April 17
Welcome and Introduction
Keynote Address
Featured Speaker:
George Whitesides
CEO and President,
Virgin Galactic
Mircea Gradu
Vice President
Powertrain,
Engineering,
Chrysler Group LLC
SAE 2013 World
Congress General Chair
10:30 a.m. – 12:30 p.m.
CO2 Challenge - What are the Most Cost Effective Fuel
Economy Solutions?
Around the world, rapidly decreasing CO2 standards are just beginning to take effect. These
standards and competition over fuel economy bragging rights will drive new technologies
into the market representing big opportunities for innovators who can keep pace and roll out
a string of hits. What are the future technology knobs that can be turned to improve CO2 of
vehicles? How far should they be turned to achieve CO2 reductions most cost effectively? This
panel will discuss their perspective on where, when, and why different solutions will emerge.
Moderator:
Jeffrey C. Klei
President, NAFTA Region Continental North America
Panelists:
Joseph Bakaj
Vice President, Powertrain
Engineering, Ford Motor
Company
Juergen J. Greiner
Executive Vice President,
Product Development
Powertrain Technology, ZF
Friedrichshafen AG
Bob Lee
Vice President & Head of
Engine Powertrain & Electrified
Propulsion Systems Engineering,
Chrysler Group LLC
34
Yasuyuki Sando
General Manager, Smart
Mobility Development Division,
Honda R&D Co., Ltd., Honda
R&D
Makoto Yasuda
Vice President, Powertrain,
Nissan Motor Company, Ltd.
9:45 – 11:45 a.m.
Take a Load Off: The Increasing Importance of Energy Load
Management in Tomorrow’s Powertrain Solutions
Wednesday
April 17
Demands on vehicle electrical architectures have skyrocketed as fuel efficiency targets
have moved to the forefront in the automotive sector. Newer, mainstream automotive
technologies such as steering-by-wire, brake-by-wire, variable valve trains, active
suspensions, and heated catalysts, among others, are also placing dramatically greater
demands on electrical systems. Powertrain developers are also being tasked with placing
much more emphasis on the recovery and use of wasted mechanical and thermal energy
as they consider technologies such as kinetic energy recover systems, better management
of AC/heating energy use and the potential use of heat pumps to recover exhaust heat.
These trends are not unique to just niche market vehicles, but are becoming mainstream
considerations for larger volume products. Automotive engineers are being challenged
like never before to increase energy efficiency and to efficiently recover waste energy. This
session will provide a balanced OEM/supplier assessment of the emerging technologies we
can expect to see that address this need.
Moderator:
Joachim Wolschendorf
Vice President, FEV, Inc.
Panelists:
Larry Laws
Lead CO2 Strategist, General Motors Company
Richard D. Smith
Vice President, Thermal Engineering, DENSO International America, Inc.
Nizar Trigui
Global Chief Engineering, Vehicle Energy Management, Ford Motor Company
Timothy White
Director, Powertrain Application Engineering, Chrysler Group LLC
35
Wednesday
April 17
1:30 – 3:30 p.m.
Advanced Propulsion - What are the New and Innovative
Technologies that will be the “Game Changers”?
With so many challenges in the area of propulsion for the future vehicles one must
wonder what are the “Game Changers” that the industry will face? Certainly new
technologies must be invented and introduced. This panel will examine what some of the
key industry leaders believe some of these may be.
Moderator:
Dimitri Kazarinoff
President, AVL Powertrain Engineering Inc.
Panelists:
Guenter K. Fraidl
Senior Vice President Powertrain System Passenger Cars, AVL LIST GmbH
Michael Harpster
Director, Propulsion Systems Research Lab, GM Global Research &
Development
David Johnson
CEO, Achates Power Inc.
Andreas Schamel
Director Global Powertrain Research & Advanced Engineering
Managing Director, European Ford Research Centre, Ford Motor Company
Christopher P. Thomas
Vice President & Chief Technology Officer, BorgWarner Inc.
Hakan Yilmaz
Chief Engineer, Gasoline Systems, Robert Bosch LLC
36
1:00 – 3:00 p.m.
Systems Engineering: Breaking Down the Walls to Develop
a Better Solution
Wednesday
April 17
A majority of the engineering community’s mindset is to approach solutions from a
distinct single-track methodology. The goal of systems engineering is to approach
solutions from multiple disciplines and perspectives to generate a solution as a whole. By
breaking down the boundaries within specific organizations and working collaboratively
to develop a solution that reduces time to market, reduces cost and improves efficiency
and reliability. The greatest challenge is buy-in from all of the engineering departments
to accept changes (and cost) for the greater good of the technology change.
Moderator:
Greg Fadler
Director, Performance Integration, Navistar, Inc.
Panelists:
Heribert Scherer
Director Testing, Powertrain Technology, ZF Friedrichshafen AG
James Hentschel
Executive Director & Global Functional Leader, Global Advanced
Development & Computer Aided Engineering, Global Engineering, General
Motors Corporation
Thomas McCarthy
Chief Engineer, Research & Advanced Powertrain Engineering, Ford Motor
Company
Guenther Raab
Director, Systems Engineering Group, Continental Automotive Systems US Inc.
37
Thursday
April 18
9:00 a.m.
Welcome and Introduction
Mircea Gradu
Vice President
Powertrain,
Engineering, Head of
Virtual Analysis, Chrysler
Group LLC , and SAE
2013 World Congress
General Chair
Keynote Address
Featured Speaker:
Bob Lutz
Retired Vice Chairman,
General Motors
Company &
President and
Chief Executive Officer
Lutz Communication
10:30 a.m. – 12:30 p.m.
Product Development Efficiency - Reducing Time to Market
with the Right Products
Product is king. This panel will focus on challenges and solutions to empowering global
engineering organizations to bring innovative new products to market that consumers want
in less time, with higher quality, and at lower overall cost. All this while needing to maintain
agility in the face of change, achieve economies of scale amongst disparate market needs,
adhere to rapidly advancing regulations, and achieve buy-in amongst different silos, cultures,
generations, and regions. Executives will discuss their thinking on achieving efficiency
through people, processes, and structure.
Moderator:
Martin Fischer
President, HELLA
Panelists:
Carla Bailo
Senior Vice President, Research
& Development, Nissan
Americas
Eric Tech
President, Global Truck & Engine
Navistar, Inc.
Priya Playle
Principal, P3 North America Inc.
Benjamin Winter
Vice President -- Vehicle
Engineering,
Chrysler Group LLC
Randall W. Stephens
Chief Engineer, Product
Development Office, Toyota
Technical Center USA Inc.
38
9:45 – 11:45 a.m.
Rising Above the Conventional: What Technologies have
the Largest Potential to Get to the Best Possible Vehicle
Fuel Efficiency (and why)?
Thursday
April 18
There is more focus on fuel efficiency than there has been at any time in recent memory.
Myriad technologies are being proposed from many fundamental directions: combustion,
materials and mechanical component design, thermodynamics, tribology, chemistry,
vehicle dynamics, power transmission, and body in white, just to name a few. Each of
the innovations in these fields come with a set of benefits, some potential drawbacks,
and a cost. Powertrain developers are faced with having to select the right combination
of features to target the highest efficiency gain. This session will compare the emerging
technologies from a cost/benefit/timing perspective and provide insight on the
technologies that will likely rise to the top of the powertrain developers “short list.”
Moderator:
Floyd E. Allen
Powertrain Systems Executive, FEV, Inc.
Panelists:
Chris Cowland,
Director, Advanced & SRT Powertrain, Chrysler Group LLC
Bob Fascetti
Director, Global Engine Engineering, Powertrain Product Development, Ford
Motor Company
Douglas A. Hughes
Engineering Manager - Advanced Powertrain, Eaton Corp.
Prabjot Nanua
Director, Advanced Engineering, General Motors Company
39
Cobo Center Floor Plan
Zones
Safety/Testing Lounge
on
A
e
riv
dD
n
ea
oti
nMs
I
rld ent
Wo Ev
Rid
Exhibitor
Services
Powertrain/Propulsion
Sustainability Lounge
RT
OD
FO
Concierge Club
FEV Powertrain
Innovation Forum
AVL Technology
Leadership Center
40
Entrance to
Ride and Drive
EXHIBITS
air
rF
U
CO
e
are
C
tra
gis
Re
n
tio
Electronics/
IDM/Materials Lounge
ACHIEVING
EFFICIENCY
E
TIV
NT
Y
G
LO
E
EV
O
N
CH
TE
O
M
TO
U
A
IAL
T
N
SE
S
E
HE
T
Visit the SAE Career Fair at
Cobo Center
Tuesday, April 16 and Wednesday, April 17
10:00 a.m. – 6:00 p.m.
Unique opportunities will be provided for engineers and
professionals to explore available jobs, network with recruiters,
and learn valuable career tips.
While visiting the Career Fair, job seekers can:
•
Attend the career development session “CareerWise for
Engineering Professionals: Transforming Your Talents into
the New World of Work” on Wednesday, April 17 from
1:00 – 3:00 p.m.
•
Attend a free Resume Clinic where mobility industry
experts will critique resumes on Wednesday, April 17
from 10:00 a.m. – 12:00 p.m.
•
Browse open positions—both on site and online
Host Company
Tier One
Strategic Partner
For a list of exhibitors and more information, visit
www.sae.org/congress/specialevents/career.htm
sae.org/congress
P122144
ELECTRONICS
SESSIONS technical, business & executive
Author information text is published as submitted by
technical paper authors.
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
Automobile Electronics Design and Systems Reliability (AE302)
-
-
-
-
4
-
D0-07B
53
Chat with the Experts: Introducing Wireless Charging Technology
for Electrical Vehicles (AECHAT100)
-
4
-
-
-
-
D0-07B
47
4
-
-
-
-
-
D0-03B
43
Expert Panel Discussion: Compare and Contrast Prognostics and
Diagnostics (AE604)
-
-
-
4
-
-
D0-04C
52
Expert Panel Discussion: Connected Vehicle Technology
Transforming Transportation (AE331)
-
-
-
-
-
4
D0-04C
55
Expert Panel Discussion: AUTOSAR Changing how we design
and implement Automotive Embedded Networks and Electronic
Control Modules (AE501)
4
-
-
-
-
-
D0-04C
43
Expert Panel Discussion: Energy Management - Solutions for
Today, Tomorrow and the Future (AE605)
4
-
-
-
-
-
D0-07B
43
In-Vehicle Networks (AE305)
-
-
-
-
4
-
D0-04C
53
Intelligent Transportation Systems - Safer, Smarter, Faster (AE313)
-
-
4
-
-
-
D0-04AB
48
Intelligent Vehicle Initiative (IVI) Technology, Advanced Controls,
and Navigation Systems (AE309)
-
-
-
4
-
-
D0-04AB
50
4
4
4
-
-
-
-
D0-06B
43, 44, 45
-
-
-
-
-
D0-04AB
44
Processes, Methods, and Tools for Cyber-Security-Aware
Automotive Embedded Systems (AE321)
-
-
-
-
4
-
D0-07A
53
Prognostics (AE601)
-
-
4
-
-
-
D0-04C
48
4
4
4
4
-
-
D0-07A
44, 45,
48, 50
Simulation and Modeling Mechatronics (AE201)
-
-
-
4
-
-
D0-06B
50
Smart Grid Technologies and Infrastructure (AE400)
-
-
-
-
-
D0-07B
44, 45
System Level Architecture Design Tools and Methods (AE318)
-
4
4
-
-
-
-
D0-04C
47
Systems Engineering (AE312)
-
-
-
-
4
-
D0-04AB
53
Technologies for Embedded Software Development and Testing
(AE108)
-
4
-
-
-
-
D0-04AB
45
Testing and Instrumentation (AE106)
-
4
-
-
-
-
D0-04C
47
Vehicle Diagnostics Part 2 - Expert Panel Discussion: Service
Information Technician Needs (AE311)
-
-
-
4
-
-
D0-04C
50
Vehicle Diagnostics - Part 1 (AE311)
-
-
4
-
-
-
D0-04C
48
Vehicle Sensors and Actuators (AE319)
-
-
-
-
4
-
D0-07A
55
Electrical Wiring Harnesses (AE301)
Model-Based Design and In-Vehicle Software (Part 1 & 2) (AE316)
Multi-Media Systems (AE307)
Safety Critical Systems (Part 1 - 4) (AE300)
Electronics Sessions Notepads
Sponsored by
42
TIME
SESSION TITLE, DESCRIPTION, AND ROOM
D0-03B
D0-04C
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
11:10
a.m.
D0-06B
Electrical Wiring Harnesses
(AE301)
Expert Panel Discussion: AUTOSAR
Changing how we design and
implement Automotive Embedded
Networks and Electronic Control
Modules (AE501)
Expert Panel Discussion: Energy
Management - Solutions for
Today, Tomorrow and the Future
(AE605)
Model-Based Design and InVehicle Software (Part 1 of 2)
(AE316)
The Electrical Wiring Harness session
deals with innovations and new develops
surrounding the design, development,
optimization, and manufacturing of wiring
systems, connectors, terminals, wires,
coverings, and other related components.
The session will also hit on new topics for
more robust environmental performance,
alternate materials, integration with
other systems, and high voltage/current
considerations.
This panel will address the current status of
AUTOSAR adoption by the vehicle OEMs,
Tier 1 module developers and AUTOSAR
products and service providers. Who is
adopting this technology, lessons learned
and what the impact maybe for you and the
ways vehicles are designed and built?
As OEM’s and suppliers seek new
and unique ways to manufacture fuel
efficient vehicles, energy management
has become a crucial area of focus in
meeting those goals. Concerns about the
relationship of suppliers and OEM’s impact
the development of new fuel efficient
technologies as well as how long can
they sustain a profitable business while
leading the path of innovation in energy
management. Hear panelists on share their
insights about innovation thought leadership
approaching challenges.
Description: Embedded software is a
key enabler for technical innovations in
the automotive industry. This session
is designed to cover new processes,
methods, and applications of new
processes/methods to reduce development
time and improve the quality of embedded
software. A particular emphasis will be
placed on methods such as executable
specification, design through simulation,
early verification, automatic code
generation, and PC-based model in-theloop and software in-the-loop testing.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
J. Howard Evans, Bentley Motors, Ltd.;
Jeremy Tibbett, Leoni Wiring Systems Inc.
Organizers:
Robert Miller, Vector CANtech Inc.
Moderators:
Marc Rosenmayr, HELLA
Organizers:
Vivek Jaikamal, ETAS Inc.; Wensi Jin,
MathWorks Inc.; Robert Miller, Vector
CANtech Inc.
Moderators:
Robert Miller, Vector CANtech Inc.
Panelists:
Ralf Fritz, Vector CANtech Inc.
Ron Landman, John Deere Electronic
Solutions
Michael Joseph Melaragni, General Motors
Jochen Schoof, Elektrobit Automotive
GmbH
Scott Michael Wendling, Nexteer
Automotive
9:30
a.m.
D0-07B
Panelists:
Donald J. Christian, CODA Automotive Inc.
Glenn Denomme, A123 Systems
Tejas Desai, Continental
Luigi del Re, Johannes Kepler Univ.
Harness weight reduction by using small
cross section wires and alternative materials
Hierarchical Accumulative Validation of
Executable Control Specifications
(Oral Only)
(2013-01-0430)
Wolfgang Langhoff, Leoni BordnetzSysteme GmbH & Co. KG
Jared Farnsworth, Koichi Ueda, Toyota
Motor Engineering & Mfg NA Inc.; Hideaki
Mizuno, Michio Yoshida, Toyota Motor
Corporation
Aluminum introduction in Electrical
Distribution Systems
Requirement-based Test Case Generation
and Coverage Analysis
(2013-01-0397)
(Oral Only)
Louis Chretien, LEONI Wiring Systems
James Ross, John Deere
A New Approach to the Test, Assessment
and Optimization of Robust Electrical
Distribution Systems
Application of Model Checking to
Automotive Control Software with Slicing
Technique
(2013-01-0396)
(2013-01-0436)
Ludwig Brabetz, Mohamed Ayeb, Giscard
Jilwan, Patrick Graebel, Tobias Kerner,
University of Kassel
Masahiro Matsubara, Kohei Sakurai, Fumio
Narisawa, Hitachi, Ltd.; Masushi Enshoiwa,
Yoshio Yamane, Hitachi Advanced
Digital, Inc.; Hisamitsu Yamanaka, Hitachi
Automotive Systems, Ltd.
Electrical Power System Assessment
Method Based on Bayesian Networks
Design Verification of Automotive Controller
Models
(2013-01-0399)
(2013-01-0428)
Mohamed Ayeb, Patrick Graebel, Ludwig
Brabetz, Giscard Jilwan, University of
Kassel
A. C. Rajeev, MathWorks India Pvt. Ltd.;
Swarup Mohalik, Intel Technology India Pvt.
Ltd.; S. Ramesh, General Motors Company
Internal Pressure Measurement for Sealed
Electrical Connectors on Automotive Wire
Harnesses: A method to improve Seal Plug
Design
New Methods of Debugging and Testing
Improve the Software Quality of AUTOSAR
ECUs
(2013-01-0398)
(2013-01-0427)
Donald Price, Ford Motor Co.
Richard E. Lotoczky, Vector CANtech Inc.;
Mark Schwager, Vector Informatik GmBH
The Preformed Harness as a solution for
high-temperature applications
New Approaches in Virtualization of ECU
Software Development
(Oral Only)
(2013-01-0429)
Matthias Groetsch, Leoni BordnetzSysteme GmbH & Co. KG
Guillaume Francois, ETAS GmbH
Planned by Electrical and Electronic
Systems Committee / Automobile
Electronics Activity
Planned by Testing and Instrumentation
Committee / Automobile Electronics Activity
The papers in this session are available
in SAE Technical Paper Collection,
COLL-TP-00323, and also individually. To
purchase visit collections.sae.org
43
ELECTRONICS
Tuesday, April 16 - Morning
Technical and Business Sessions
ELECTRONICS
TIME
D0-04AB
9:30
a.m.
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
11:10
a.m.
D0-07A
Multi-Media Systems (AE307)
Safety Critical Systems (Part 1 of
4) (AE300)
This session covers topics relating to
vehicular entertainment and information
systems. Specific subjects include
multiband antennas, satellite radio
reception, measuring and evaluating audio
systems, navigation, displays, infotainment
busses, audio amplifiers, and loudspeakers.
The focus of the session is on system
safety analysis and design of safety-critical
systems employing electronic controls.
Topics include: implementation of safetyrelevant systems, fail-safe strategies,
distributed fault tolerant systems and
hazard analysis. Application areas include:
automotive active safety and alternative
energy systems as well as avionics and
mission management. Finally, the session
addresses application of new or revised
safety standards such as ISO 26262 and
DO-178C.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Thomas Hermann, Ford Motor Company;
Robert Klacza, Chrysler Group LLC; Richard
S. Stroud, Stroud Audio Inc.
Organizers:
Joseph G. D’Ambrosio, GM R&D Center;
Brian T. Murray, United Technologies
Research Center; Markus Plankensteiner,
TTTech Computertechnik AG
A Peek Under The Hood: Technologies
Driving the Connected Car
Model-based Application of ISO 26262: The
Hazard Analysis and Risk Assessment
(Oral Only)
(2013-01-0184)
Judy Chen, MHL Consortium
Marion Suerken, Thomas Peikenkamp,
OFFIS e.V.
Multi-Media System Session:
Supercomputing to Supercars
Introducing Quality Attributes for a Safety
Concept
(Oral Only)
(2013-01-0194)
Dave Anderson, Nvidia Corp.
Rasmus Adler, Fraunhofer IESE
Assessment of Automatic Volume Leveling
for Automotive Sound Systems
Functional Safety for Cooperative Systems
New SAE 2013 World Congress
Electronics
(2013-01-0162)
(2013-01-0197)
TECHNICAL PAPER COLLECTIONS
Robert Cadena, Husein Dakroub, Visteon
Corporation
Josef Nilsson, SP Technical Research Inst
of Sweden; Carl Bergenhem, Qamcom; Jan
Jacobson, Rolf Johansson, Jonny Vinter,
SP Technical Research Inst of Sweden
Ensuring Audio Signal Quality in Automotive
Infotainment Systems
ASIL Decomposition: The Good, The Bad,
and The Ugly
(2013-01-0163)
(2013-01-0195)
J. William Whikehart, Visteon Corporation
Joseph G. D’Ambrosio, Rami Debouk,
Reception Requirements for Automotive
Radio Systems
Development of a System Safety Case
(2013-01-0164)
(Oral Only)
Raed S. Shatara, STMicroelectronics
Padma Sundaram, David Hartfelder,
General Motors
Dual Antenna Diversity System for FM
Reception
Functional Safety Industry Best Practices for
Introducing and Using ISO 26262
(2013-01-0165)
(2013-01-0191)
Raed S. Shatara, STMicroelectronics
Christof Ebert, Vector Consulting Services
Designed for the individual with a specific research need, SAE Collections
are assembled from technical papers authored from a SAE session, are
directly related to a specific topic or technology, and
are available online anytime through MyLibrary.
Titles include:
Technologies for Embedded
Software Development and
Testing, 2013
9 Papers, COLL-TP-00320
Safety Critical Systems, 2013
26 Papers (estimate),
COLL-TP-00321
Systems Engineering, 2013
For more information on SAE Technical Paper Collections or a
complete listing of available titles, visit collections.sae.org.
Order today!
Online:collections.sae.org
E-mail: [email protected]
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
The purpose of this session is to provide an open exchange of ideas. Remarks
made by participants or members of the audience cannot be quoted or attributed
to the individual or their company unless express permission has been granted
by the individual and their company. Any record of remarks, discussion, or
photographs may not be used unless express permission has been granted by the
individual and their company.
44
Model-Based Design and
In-Vehicle Software, 2013
COLL-TP-00323
P135214
TIME
D0-06B
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
D0-07A
D0-07B
D0-04AB
(AE316)
4) (AE300)
Smart Grid Technologies and
Infrastructure (AE400)
Testing (AE108)
DO-178C.
This session will provide real world updates
on consumer behavior who are part of the
DOE awarded EV Project as well as other
research using models and consumer data
to analyze the affect on the grid during
PEV charging. Also presented will be
strategies for PEV charging and synergies
for integrating PEV’s into the grid by way of
existing infrastructure.
Developing automotive electronic controls
and embedded software is a complex
undertaking. In addition to Hardwarein-the-Loop simulation, improvements
in desktop computing technology
show promise for early verification of
embedded software using a virtual
environment for electronic control units
and the test infrastructure. This session
highlights advances in processes, tools,
and technologies to reduce design and
validation time and cost, and to improve the
quality of embedded software.
1:00 p.m. - 4:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
CANtech Inc.
Organizers:
Organizers:
Donna Bell, Ford Motor Co.; Scott Craig,
Infineon Technologies; Matthew Nielsen,
General Electric Co.
Organizers:
Kevin Kott, Vivek Moudgal, dSPACE Inc.;
Peter Waeltermann, dSPACE GmbH
Gaining Visibility Control over Final Project
Releases:
A Case Study Using Audio Infotainment
Systems
A Computer-aided Formal Requirement
Specification Method to support the
Verification Process for Safety Related
Systems
Extended Range Electric Vehicle Driving and
Charging Behavior Observed Early in The
EV Project
New Advances in Automotive Electronics
Development Through PC-Based Simulation
(2013-01-0434)
(Oral Only)
(2013-01-1441)
(Oral Only)
Joao H. Silva, Visteon Corp.
Udo Brockmeyer, BTC Embedded Systems
AG; Hans Holberg
John Smart, Warren Powell, Idaho National
Laboratory; Stephen Schey, ECOtality North
America
Klaus Lamberg, dSPACE GmbH,
Paderborn, Germany
From Specification Models to Distributed
Embedded Applications: A Holistic UserGuided Approach
A Contract-Based Installation Methodology
for Safety-Related Automotive Systems
Optimal Charging of EVs in a Real Time
Pricing Electricity Market
Test management in HIL systems
(2013-01-0432)
(2013-01-0192)
(2013-01-1445)
(Oral Only)
Ingo Stierand, Günter Ehmen, Werner
Damm, Detlef Janssen, University of
Oldenburg; Matthias Büker, Stefan Henkler,
Eike Thaden, OFFIS
Andreas Baumgart, OFFIS e.V.
Sagar Mody, Thomas Steffen,
Loughborough Univ.
Holger Krumm, dSPACE GmbH
“Lean Model-Based Development: Practical
Approach”
Effort Reduction for Analysis of Safety
Critical Software with Criticality Analysis
Development of Vehicle Power Connector
Equipped with Outdoor Power Outlet Using
Vehicle Inlet of Plug-In Hybrid Vehicle
New concepts and visions to support HIL
workflows better
(2013-01-0437)
(2013-01-0183)
(2013-01-1442)
(Oral Only)
Lev Vitkin, Delphi Electronics & Safety
Marcin Kowalewski, Zerong Yu, Willy Klier,
Robert Bosch LLC
Shigeki Kinomura, Toyota Motor Corp.;
Hironobu Kusafuka, Kensuke Kamichi,
Tomoya Ono, Toyota Motor Corp
Martin Ruehl, dSPACE GmbH
Developing a Model Based Design
Environment to support Rapid Prototype
Development and Production Code
Generation
Performing Safety Evaluation on Detailed
Hardware Level according to ISO 26262
The Aggregation of Electric Vehicles for DC
Fast Charging in V2G/G2V Applications
An Effective Modeling Architecture for MIL,
HIL and VDIL Testing
(Oral Only)
(2013-01-0182)
(Oral Only)
(2013-01-0154)
Abdolreza Fallahi, Todd Nordby, Navistar
Engine Group
Nico Adler, Stefan Otten, FZI Research
Center for Information Tech; Philippe Cuenot,
Continental Automotive France; Klaus MüllerGlaser, Karlsruhe Institute of Technology
Sean C. Mitchem, Joe Redfield, Southwest
Research Institute
Hamid Alper Oral, Bosch Rexroth Corp.
Software-In-the-Loop Model Development
for HEV Model-Based Fuel Economy
Calibration
Advantages of the alternative method for
random hardware failures quantitative
evaluation – A practical survey for EPS
Model-Predictive Energy Management for
the Integration of Plug-In-Hybrid Electric
Vehicles into Building Energy Systems
Rapid Prototyping Energy Management
System for a Single Shaft Parallel Hybrid
Electric Vehicle Using Hardware-in-the-Loop
Simulation
(Oral Only)
(2013-01-0190)
(2013-01-1443)
(2013-01-0155)
Poyu Tsou, Judy Che, Lawrence Rose, Ford
Motor Company
Kamil Svancara, John Priddy, TRW
Automotive; Tomislav Lovric, TRW
Automotive GmbH; Joseph D. Miller, TRW
Automotive US LLC; Maciej Kudanowski,
William J. Forbes, TRW Automotive
Bernhard Brendle, Thomas Hamacher,
Markus Lienkamp, Technische Universitaet
Muenchen; Christian Wilhelm, Jens
Papajewski, Peter Gebhard, Alexander
Riedel, Vincent Benda, Audi AG
Yang Li, Pushkar Agashe, Zicheng Ge, Bo
Chen, Michigan Technological Univ.
Artist-Centric New HMI Software
Development Workflow:
Development of Real-Time 3D Rendering
Engine for Reconfigurable Instrument Clusters
Application of Accelerated Processing Units
in Safety-Critical Systems
Panel Discussion: Smart Grid Technologies
and Infrastructure
Hybrid Electric Vehicle Powertrain Controller
Development
Using Hardware in the Loop Simulation
(2013-01-0425)
(2013-01-0179)
Kazuyuki Nakata, Kentaro Kajita, Ryoichi
Nishikawa, DENSO Corporation; Soju
Matsumoto, Takumi Ishikawa, Yoma
Watarai, 3D Incorporated
Dawid Trawczynski, Advanced Micro
Devices; Janusz Zalewski, Florida Gulf
Coast Univ.
(2013-01-0156)
Moderators:
Scott Craig, Infineon Technologies North
America Corp.
Haotian Wu, Haiyan Zhang, Vahid Motevalli,
Yili Qian, Purdue Univ.; Alexander Wolfe,
Caterpillar
Panelists:
Eaton TBD
Ford Motor Company TBD
Georgia Tech TBD
Infineon TBD
Sun Power TBD
Whirlpool TBD
Continued on next page
45
ELECTRONICS
Tuesday, April 16 - Afternoon
ELECTRONICS
TIME
D0-06B
3:00
p.m.
3:20
p.m.
3:40
p.m.
4:00
p.m.
D0-07A
D0-07B
D0-04AB
(AE316)
4) (AE300)
Smart Grid Technologies and
Infrastructure (AE400)
Testing (AE108)
DO-178C.
This session will provide real world updates
on consumer behavior who are part of the
DOE awarded EV Project as well as other
research using models and consumer data
to analyze the affect on the grid during
PEV charging. Also presented will be
strategies for PEV charging and synergies
for integrating PEV’s into the grid by way of
existing infrastructure.
Developing automotive electronic controls
and embedded software is a complex
undertaking. In addition to Hardwarein-the-Loop simulation, improvements
in desktop computing technology
show promise for early verification of
embedded software using a virtual
environment for electronic control units
and the test infrastructure. This session
highlights advances in processes, tools,
and technologies to reduce design and
validation time and cost, and to improve the
quality of embedded software.
1:00 p.m. - 4:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
CANtech Inc.
Organizers:
Organizers:
Donna Bell, Ford Motor Co.; Scott Craig,
Infineon Technologies; Matthew Nielsen,
General Electric Co.
Organizers:
Kevin Kott, Vivek Moudgal, dSPACE Inc.;
Peter Waeltermann, dSPACE GmbH
Model-Based Design and In-Vehicle
Software
Efficiency of Safety-Related Non-Functional
Software Unit Test
Maneuver-based Battery-in-the-Loop
Testing - Bringing Reality to the Lab
(2013-01-0431)
(2013-01-0188)
(2013-01-0157)
Volker Skwarek, Hella
Fahrzeugkomponenten; Martin Hein, Hella
Fahrzeugkomponenten GmbH
Zerong Yu, Willy Klier, Robert Bosch LLC
Oguz H. Dagci, AVL Powertrain Engineering
Inc.; Nicolas Pereira, AVL France SAS;
Jeff Cherry, US Environmental Protection
Agency
Control Flow Analysis of Automotive
Software Components Using Model-Based
Specifications of Dynamic Behavior
Impact of Functional Safety on EMC: ISO
26262
Development and Production
Implementation of Electric Drive Controller
for Hybrid Electric Vehicle
(2013-01-0435)
(2013-01-0178)
(2013-01-0158)
Thomas Pramsohler, Mahmut Kafkas,
BMW Forschung & Technik GmbH; Annette
Paulic, Marc Zeller, Fraunhofer ESK; Uwe
Baumgarten, Technische Universität
München
Robert Kado, Chrysler Group LLC; Jody J.
Nelson, William Taylor, kVA
Kunal Patil, Mahendra Muli, Zhenhua Zhu,
dSPACE Inc.
Dynamic Vehicle Powertrain Model
Development and Hardware-in-the-Loop
Simulator for Developing and Measuring
Fuel Efficient CO2 Reducing Technologies
Development of a Plug-In Hybrid Electric
Vehicle Control Strategy Employing
Software-In-the-Loop Techniques
(2013-01-0355)
(2013-01-0160)
Alan Brown, Doris Kotori, HELLA
Electronics Corp.
P. Christopher Manning, Eli White, Douglas
Nelson, Abhijit Khare, Virginia Tech
Development of the Clutch Controller for
the Hybrid System using Automatic Code
Generation
(2013-01-0438)
Hiroyuki Inagaki, Aisin Seiki Co. Ltd
4:20
p.m.
Model Based System Design of Driveby-Wire algorithm for Electric Vehicle
Conversion (EVC)
(2013-01-0426)
Ananchai Ukaew, DRIVE Center, Naresuan
University
10:01
p.m.
Automatic Test-Case Generation for
Hardware-In-the-Loop Testing of
Automotive Body Control Modules (Written
Only -- No Oral Presentation)
(2013-01-0161)
Ki-Wook Shin, Hanyang Univ.; Shim Soo
Kim, Daedong Co., Ltd.; Dong-Jin Lim,
Hanyang Univ.
46
ELECTRONICS
TIME
D0-04C
1:00
p.m.
D0-04C
D0-07B
Testing and Instrumentation
(AE106)
System Level Architecture Design
Tools and Methods (AE318)
Chat with the Experts: Introducing
Wireless Charging Technology for
Electrical Vehicles (AECHAT100)
This session deals with Innovative Engine
Test methods along with their test facility
development, Vehicle Infotainment systems,
Real time customer usage data and
correlation/simulation with in-lab drivability
methods, Reliability Testing Approach.
This session focuses on methods and
design tools for the exploration, analysis,
synthesis, and optimization of E/E
automotive architectures.
1:00 p.m. - 2:20 p.m.
2:40 p.m. - 4:00 p.m.
4:00 p.m. - 5:00 p.m.
Organizers:
Anand Vijay Kulkarni, Tata Motors, Ltd.;
Ketan R. Kulkarni, Tata Consultancy
Services; Chirag Sonchal, TATA MOTORS;
Prasad Srinivasa, DG Technologies
Organizers:
Amit Choudhury, ADVICS NA, Inc.; Paolo
Giusto, General Motors
Keynote Speakers:
Mark Klerer, Qualcomm
Developing Drivetrain Robustness for Small
Engine Testing
(2013-01-0400)
Marek Tatur, Dean Tomazic, FEV Inc.; HansDieter Sonntag, Norbert Wiehagen, FEV
GmbH; Thomas Jackson, FEV Inc.
1:20
p.m.
A New Chassis Dynamometer Laboratory
for Vehicle Research
(2013-01-0402)
Per Öberg, Peter Nyberg, Lars Nielsen,
Linköping Univ.
1:40
p.m.
Intelligent ECU End of Line Testing to
Support ISO26262 Functional Safety
Requirements
(2013-01-0403)
Jin Seo Park, Infineon Technologies Korea
Co. Ltd.; Il hong Suh, Hanyang Univ.;
Chang Yul Choe, Minho Ro, Hyundai
KEFICO; Simon P. Brewerton, Infineon
Technologies UK Ltd
2:00
p.m.
Design Improvements Done in Telematics
System Towards Betterment of Services
Offered to Fleet Customers
(2013-01-0401)
Ramya Natarajan, Ganesan Swaminathan,
Ashok Leyland Ltd.
2:40
p.m.
Tackling the Complexity of Timing-relevant
Deployment Decisions in Multicore-Based
Embedded Automotive Software Systems
(2013-01-1224)
Wolfgang Schwitzer, Technische
Universitaet Muenchen; Rolf Schneider,
AUDI AG; Dominik Reinhardt, BMW
AG; Georg Hofstetter, Elektronische
Fahrwerksysteme GmbH
3:00
p.m.
An Integrated Approach for Modeling,
Analysis and Optimization of Systems
whose design follows the EAST-ADL2/
AUTOSAR Methodology
(2013-01-1225)
Ernest Wozniak, Sara Tucci-Piergiovanni,
Chokri Mraidha, Sebastien Gerard, CEA
LIST
3:20
p.m.
On Managing Performance and Timing in
Early-Stage E/E Design - Reducing the Gap
Between Requirements and Implementation
(2013-01-1223)
Nico Feiertag, Christoph Ficek, Kai Richter,
Symtavision GmbH
3:40
p.m.
Test Generation Technology for an
AUTOSAR Simulation Platform
(2013-01-1222)
Bill Chown, Mentor Graphics Corp
4:00
p.m.
(2013-01-1224)
Wolfgang Schwitzer, Technische
Universitaet Muenchen; Rolf Schneider,
AUDI AG; Dominik Reinhardt, BMW
AG; Georg Hofstetter, Elektronische
Fahrwerksysteme GmbH
47
ELECTRONICS
Wednesday, April 17 - Morning
TIME
D0-04AB
8:00
a.m.
8:20
a.m.
D0-04C
D0-07A
D0-04C
Intelligent Transportation Systems Prognostics (AE601)
- Safer, Smarter, Faster (AE313)
4) (AE300)
Vehicle Diagnostics - Part 1
(AE311)
Intelligent Transportation Systems (ITS)
includes smart vehicles, smart roads and
infrastructure, and wired and wireless
communications to link them together.
This session will provide insights and
progress reports on the latest ITS research,
development, and deployment around
the world. Time to collision estimations,
embedded processor control, adaptive
cruise control and image recognition along
with discussion on the management of
safety and safety systems.
Known as Integrated Health Vehicle
Maintenance in Europe and Condition
Based Maintenance in the U.S.A.,
Prognostics is sometimes referred to
as Predictive Maintenance. The value
proposition story of prognostics will be
reviewed with actual case studies of how
prognostics reduces costs. How to build a
algorithm that captures the important values
related to a system in order to produce the
wanted result or “catch the anomaly”. Case
studies will be discussed.
DO-178C.
Vehicle diagnostics deals with the
development, delivery and execution of
diagnostic procedures for vehicle systems.
This session will explore new technologies,
processes and trends in the area of vehicle
diagnostics.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 11:20 a.m.
10:00 a.m. - 11:40 a.m.
Organizers:
David Acton, The-Transformation-Network
Inc.; Stephan Tarnutzer, DGE Inc.
Organizers:
Tim A. Cavanaugh, Cavanaugh Consulting
Organizers:
Organizers:
Kathleen E. Kedzior, MAHLE Test Systems
Automotive Emergency Call and NG(Next
Generation)-911
Predictive Health Monitoring of Gear
Surface Fatigue Failure Using Modelbased Parametric Method Algorithms; An
Experimental Validation.
Safety Analysis and Design for ISO 26262 Model Based and Tool Supported
(Oral Only)
(2013-01-0624)
(2013-01-0193)
Hirofumi Onishi, Alpine Electronics of
America Inc.
Ahmed Onsy; Robert Bicker, Brian A. Shaw,
Newcastle University
Marc Born, Olaf Kath, Eckhardt Holz, IKV++
Technologies AG; Bruce Douglass, IBM
Exploring the Impact of Speed
Synchronization through Connected Vehicle
Technology on Fleet-Level Fuel Economy
Prognostics
System Modeling for Integration and Test
of Safety-Critical Automotive Embedded
Systems
(2013-01-0617)
Jan-Mou Li, Zhiming Gao, Oak Ridge
National Laboratory
(2013-01-0189)
Moderators:
Martin Krammer, Helmut Martin, Michael
Karner, Daniel Watzenig, Anton Fuchs,
Virtual Vehicle Research and Test Center
Panelists:
David V. Freeman, DOT/NHTSA
Deborah M. Freund, Federal Motor Carrier
Safety Administration
Steven W. Holland, General Motors Global
R&D
David Bernard Porter, MAHLE Powertrain
LLC
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
A Unified Framework of Adaptive Cruise
Control for Speed Limit Follower and Curve
Speed Control Function
A Reference Workflow to fulfill important
ISO 26262 Criteria for the Development of
Safety Critical Software
(2013-01-0618)
(Oral Only)
Jin-Woo Lee, General Motors Company;
Shilpa Prabhuswamy, Danlaw Inc.
Hans J. Holberg, HJH; Dirk Fleischer,
dSPACE GmbH; Ingo Stuermer, Model
Engineering Solutions
A Smart Jersey Highway Barrier with Portal
for Small Animal Passage and Driver Alert
Virtualization Technology and Using Virtual
CPU in the Context of ISO26262: The
E-Gas Case Study
(2013-01-0620)
(2013-01-0196)
Lance Clark, John R. Wagner, Kim
Alexander, Philip Pidgeon, Clemson
University
Yukihide Niimi, Takayuki Ono, Soichiro Arai,
DENSO Corporation; Hideki sugimoto,
Renesas Electronics Corporation; Riccardo
Mariani, Yogitech Spa
Estimation of CO2 Reduction Potential in
Japan by Traffic-flow Smoothing and Ecodriving Promotion
Using Vehicle Simulation to Investigate
Controllability
(2013-01-0621)
(2013-01-0180)
Hidetoshi Imaizumi, Honda R&D Co., Ltd.;
Koji Sengoku, Honda Motor Co., Ltd.
Michael Ellims, Helen Elizabeth Monkhouse,
Protean Electric Ltd.; Damian Harty, Teena
Gade, Coventry Univ.
All Round Blind Spot Detection by Lens
Condition Adaptation based on Rearview
Camera Images
Automated and Economical Qualification of
HIL Systems for Safety-Related Projects
(2013-01-0622)
(Oral Only)
Yasuhisa Hayakawa, Osamu Fukata, Nissan
Motor Co., Ltd.
Andreas Himmler, dSPACE GmbH
10:00
a.m.
High Voltage Battery System Concepts for
ISO 26262 Compliance
ISO 13209 OTX - A Door to the New
Diagnostic Standards
(2013-01-0181)
(Oral Only)
William Taylor, Jody J. Nelson, kVA
Andreas Hege, RA Consulting GMBH;
Joerg Supke, emotive GmbH
48
TIME
D0-04AB
D0-04C
D0-07A
D0-04C
Intelligent Transportation Systems Prognostics (AE601)
- Safer, Smarter, Faster (AE313)
4) (AE300)
Vehicle Diagnostics - Part 1
(AE311)
Intelligent Transportation Systems (ITS)
includes smart vehicles, smart roads and
infrastructure, and wired and wireless
communications to link them together.
This session will provide insights and
progress reports on the latest ITS research,
development, and deployment around
the world. Time to collision estimations,
embedded processor control, adaptive
cruise control and image recognition along
with discussion on the management of
safety and safety systems.
Known as Integrated Health Vehicle
Maintenance in Europe and Condition
Based Maintenance in the U.S.A.,
Prognostics is sometimes referred to
as Predictive Maintenance. The value
proposition story of prognostics will be
reviewed with actual case studies of how
prognostics reduces costs. How to build a
algorithm that captures the important values
related to a system in order to produce the
wanted result or “catch the anomaly”. Case
studies will be discussed.
DO-178C.
Vehicle diagnostics deals with the
development, delivery and execution of
diagnostic procedures for vehicle systems.
This session will explore new technologies,
processes and trends in the area of vehicle
diagnostics.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 11:20 a.m.
10:00 a.m. - 11:40 a.m.
Organizers:
David Acton, The-Transformation-Network
Inc.; Stephan Tarnutzer, DGE Inc.
Organizers:
Organizers:
Organizers:
Analysis of Potential Driver Startle in the
Safety Assessment of Advanced Propulsion
Systems
Difficulties in Service Diagnostic Tool
Development
(Oral Only)
(Oral Only)
Mark A. Vernacchia, Richard Marsh,
General Motors
Louis Scott Bolt, Mahle
Optimal Sensor Configuration and FaultTolerant Estimation of Vehicle States
Graphics Based Service Information Recommended Practice Development
Update
(2013-01-0175)
(Oral Only)
Reza Zarringhalam, Ayyoub Rezaeian, Univ.
of Waterloo; Saber Fallah, Univ. of Surrey;
Amir Khajepour, William Melek, Univ. of
Waterloo; Shih-Ken Chen, Baktiarr Litkouhi,
Arnold Taube, John Deere World
Headquarters
A Control Allocation Algorithm for Improving
the Fail-Safe Performance of an Electric
Vehicle Brake System
Complete on-board and off-board
diagnostics development, tools and
processes from an automotive systems and
aftersales tools provider
(2013-01-0187)
(Oral Only)
Chong Feng, Nenggen Ding, Yongling He,
Guoyan Xu, Feng Gao, Beihang Univ.
Cayetano Garcia Orijuela, Robert Bosch
LLC; Walter Lehle, Lehle; Ian Legate,
Teradyne Diagnostic Solutions
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
Vehicle level approach for optimization of
On-Board Diagnostic strategies for Fault
Management
(2013-01-0957)
Dibyendu Palai, Tata Motors Ltd.
10:01
p.m.
Collision Prevention While Driving in Real
Traffic Flow Using Emotional Learning Fuzzy
Inference Systems (Written Only -- No Oral
Presentation)
(2013-01-0623)
Reza Zarringhalam, University Of Waterloo;
Ali Ghaffari, K N Toosi Univ of Technology
Technical Session Oral Evaluation Incentives
In an effort to collect more evaluation ratings for the technical session speakers,
SAE will be holding daily drawings for anyone who completes an oral evaluation
card distributed in technical session rooms. Simply complete the card, tear off
the perforation with your name and contact number, and turn it in to the session
moderator. Six (6) winners will be announced daily to receive prizes. Winners will
be announced daily and posted in the technology lounges.
49
ELECTRONICS
ELECTRONICS
Wednesday, April 17 - Afternoon
TIME
D0-04AB
D0-07A
D0-06B
D0-04C
Intelligent Vehicle Initiative (IVI)
Technology, Advanced Controls,
4) (AE300)
Simulation and Modeling
Mechatronics (AE201)
Vehicle Diagnostics Part 2 - Expert
Panel Discussion: Service Information
Technician Needs (AE311)
This session presents papers by
leading experts in the field of Intelligent
Vehicle Technologies, such as: vehicle
communications and networks, driver
drowsiness and driving pattern detection,
sensors and GPS, vehicle and chassis
control and autonomous vehicles, route
prediction, head-up displays and power
transmission for electric vehicles.
The focus of the session is on system safety
analysis and design of safety-critical systems
employing electronic controls. Topics
include: implementation of safety-relevant
systems, fail-safe strategies, distributed
fault tolerant systems and hazard analysis.
Application areas include: automotive active
safety and alternative energy systems as
well as avionics and mission management.
Finally, the session addresses application of
new or revised safety standards such as ISO
26262 and DO-178C.
Historically, simulation and modeling
efforts have typically been domain specific,
independently modeling the behavior
of electronic, electrical, or mechanical
subsystems. As the complexity of these
subsystems and their inter-domain
interactions increase, it is imperative that
the inter-domain behaviors and effects are
taken into account when modeling and
simulating the resulting Mechatronic system.
Increased vehicle complexity and new
technologies could be creating a knowledge
gap in vehicle service which could impact
service performance, warranty costs and
brand image. OEMs and technicians may
not be aligned on needs and available
technologies to meet the changing
environment of service technicians. This panel
will focus on Service Information Efficacy.
The panel is comprised on industry experts
in OE, OES and aftermarket service training,
education and vehicle diagnostic technicians.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Kenneth W. Webster, Transportation
Research Center Inc.
Organizers:
Organizers:
Thomas Egel, MathWorks Inc.; Christopher
Semanson; Mark Steffka, GM Powertrain;
Chris Semanson , Ford Motor Company
Organizers:
Moderators:
Mark N. Pope, General Motors LLC
Panelists:
Joseph J. Barkai, IDC Manufacturing Insights
John Cardillo, Ford Motor Co.
Kevin E. Fondaw, General Motors LLC
Jeffrey Minter, Madison Area Technical College
Tony Molla, National Inst. for Auto Serv Excel
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
An Estimation of the Fuel Consumption
Reduction from Real-Time Traffic Information
Development and Comparison of
Monitoring Functions for Electric Vehicles
A Coupled System Simulator for Electric
Power Steering System
(Oral Only)
(2013-01-0176)
(2013-01-0423)
Richard Zerod, Visteon Corp.
Christophe Moure, Klaus Kersting, Applus
Idiada Group
Long Xie, Masaru Yamasaki, Toshiyuki
Ajima, Hitachi, Ltd; Junnosuke
Nakatsugawa, Hitachi Automotive
Systems, Ltd; Yoshitaka Sugiyama, Hitachi
Automotive Systems Steering, Ltd
V2V Next Steps: A proposal for
simplification of V2V safety systems
A New Approach to Input and Output
Monitoring for Microcontrollers Supporting
Functional Safety
A Study for Improving the Sound Quality of
Vehicle Horns through Acoustic Characteristics
Analysis and CAE Method Development
(2013-01-0982)
(2013-01-0185)
(2013-01-0422)
Mike Ridge, Robert Dekelbaum, Battelle
Memorial Institute
Simon P. Brewerton, Infineon Technologies
UK Ltd
Jong-Suh Park, Ki-Sang Chae, Hyundai
Motor Co.
Automatic Driving Maneuver Recognition
and Analysis using Cost Effective Portable
Devices
Software Architecture Methods and
Mechanisms for Timing Error and Failure
Detection According to ISO 26262:
Deadline vs. Execution Time Monitoring
Implementing System Simulation to Drive
a more Efficient Controls Development
Process
(2013-01-0983)
(2013-01-0174)
(2013-01-0420)
Amardeep Sathyanarayana, Seyed Omid
Sadjadi, John Hansen, The University of
Texas at Dallas
Christoph Ficek, Maurice Sebastian,
Nico Feiertag, Kai Richter, Marek Jersak,
Symtavision GmbH; Karsten Schmidt, Audi AG
Vincent THOMAS, LMS Imagine SA;
Vincent Talon, Renault SA; Landry
SAUSSOL, LMS Imagine SA
Consumption Optimization in Battery Electric
Vehicles by Autonomous Cruise Control using
Predictive Route Data and a Radar System
Extending Co-Simulation to the Real-Time
Domain
(2013-01-0984)
(2013-01-0421)
Andreas Freuer, Hans-Christian Reuss,
FKFS
Georg Stettinger, Alpen Adria Univ.; Josef
Zehetner, Martin Benedikt, Norbert Thek,
Virtual Vehicle Competence Center
Opportunities on Fuel Economy Utilizing
V2V Based Drive Systems
ISO 26262 - Challenges and Experiences
Working with Tier 1s
(2013-01-0985)
(Oral Only)
Dominik Lang, Thomas Stanger, Luigi del
Re, Johannes Kepler University Linz
Hakan Sivencrona, QAMCOM Research &
Technology
Panel Discussion: Applying the ModelBased Design process to achieve real-time
simulation of mechatronic systems
A panel of industry experts will discuss
the role of real-time and HIL simulation
for mechatronic systems along with the
challenges in creating multi-domain physical
models that are capable of real-time
performance. Topics of discussion will
include the role of real-time simulation in the
Model-Based Design process, techniques for
migrating from desktop to real-time simulation
and experiences combining real-time models
with physical hardware for HIL simulation.
Moderators:
Thomas Egel, MathWorks Inc.; Chris
Semanson, Ford Motor Company
Panelists:
Nathan Crosty, Magna Electronics
Hussein Dourra, Chrysler Group LLC
Marc Herniter, Rose Hulman Institute of
Technology
Harsha K. Nanjundaswamy, FEV Inc.
Dan Robinson, John Deere Intelligent
Vehicle Systems
Craig Stephens, Ford Motor Co.
50
TIME
D0-04AB
D0-07A
D0-06B
D0-04C
Intelligent Vehicle Initiative (IVI)
Technology, Advanced Controls,
4) (AE300)
Simulation and Modeling
Mechatronics (AE201)
Vehicle Diagnostics Part 2 - Expert
Panel Discussion: Service Information
Technician Needs (AE311)
This session presents papers by
leading experts in the field of Intelligent
Vehicle Technologies, such as: vehicle
communications and networks, driver
drowsiness and driving pattern detection,
sensors and GPS, vehicle and chassis
control and autonomous vehicles, route
prediction, head-up displays and power
transmission for electric vehicles.
The focus of the session is on system safety
analysis and design of safety-critical systems
employing electronic controls. Topics
include: implementation of safety-relevant
systems, fail-safe strategies, distributed
fault tolerant systems and hazard analysis.
Application areas include: automotive active
safety and alternative energy systems as
well as avionics and mission management.
Finally, the session addresses application of
new or revised safety standards such as ISO
26262 and DO-178C.
Historically, simulation and modeling
efforts have typically been domain specific,
independently modeling the behavior
of electronic, electrical, or mechanical
subsystems. As the complexity of these
subsystems and their inter-domain
interactions increase, it is imperative that
the inter-domain behaviors and effects are
taken into account when modeling and
simulating the resulting Mechatronic system.
Increased vehicle complexity and new
technologies could be creating a knowledge
gap in vehicle service which could impact
service performance, warranty costs and
brand image. OEMs and technicians may
not be aligned on needs and available
technologies to meet the changing
environment of service technicians. This panel
will focus on Service Information Efficacy.
The panel is comprised on industry experts
in OE, OES and aftermarket service training,
education and vehicle diagnostic technicians.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Kenneth W. Webster, Transportation
Organizers:
Organizers:
Thomas Egel, MathWorks Inc.; Christopher
Semanson; Mark Steffka, GM Powertrain;
Chris Semanson , Ford Motor Company
Organizers:
Moderators:
Mark N. Pope, General Motors LLC
Panelists:
Joseph J. Barkai, IDC Manufacturing Insights
John Cardillo, Ford Motor Co.
Kevin E. Fondaw, General Motors LLC
Jeffrey Minter, Madison Area Technical College
Tony Molla, National Inst. for Auto Serv Excel
2:40
p.m.
Techniques and Measures for Improving
Domain Controller Availability while
Maintaining Functional Safety in Mixed
Criticality Automotive Safety Systems
(2013-01-0198)
Swapnil Gandhi, Delphi Deutschland
GmbH; Simon P. Brewerton, Infineon
Technologies UK Ltd
3:00
p.m.
Hardware Based Paravirtualization:
Simplifying the Co-Hosting of Legacy Code
for Mixed Criticality Applications
(2013-01-0186)
Simon Brewerton, Infineon Technologies
UK; Rolf Schneider, AUDI AG
10:01
p.m.
10:02
p.m.
Dynamic Eco-Routing Methodology
Using Petri Net (Written Only -- No Oral
Presentation)
Study of Integrated Chassis Control System
Based on Virtual Prototype Simulation
(Written Only -- No Oral Presentation)
(2013-01-0989)
(2013-01-0424)
Mohamad Abdul-Hak, Mercedes Benz
Research and Development; Youssef
Bazzi, Lebanese University; Oliver
Cordes, Mercedes Benz Research and
Development; Nizar Alholou, Malok alamir,
Univ of Detroit Mercy
Tang Xinpeng, Huazhong Univ. of Sci and
Tech.
An Algorithm of Vehicle Automatic Tracking
Based on Differential Game (Written Only
-- No Oral Presentation)
(2013-01-0987)
Tang Xinpeng, Huazhong University of Sci.
& Tech.
10:03
p.m.
The Algorithmic Research of Multi-operating
Mode Energy Management System (Written
(2013-01-0988)
Wang Jun, Wang Qingnian, Jilin University;
Xiaohua Zeng, nan zhou, Jilin Univ; Li li,
Shanghai Volkswagen Automotive Co.Ltd
Planned by Computer Applications
51
ELECTRONICS
ELECTRONICS
TIME
D0-04C
Expert Panel Discussion: Compare and Contrast
Prognostics and Diagnostics (AE604)
What does Diagnostics give you that Prognostics cannot and Vice
Versa?
3:00 p.m. - 4:00 p.m.
Organizers:
Kathleen Kedzior, MAHLE Test Systems; Tim Cavanaugh, Cavanaugh
Consulting
Moderators:
Tim A. Cavanaugh, BAE Systems
Panelists:
David V. Freeman, DOT/NHTSA
Deborah M. Freund, Federal Motor Carrier Safety Administrat
Steven W. Holland, General Motors Global R & D
David Bernard Porter, MAHLE Powertrain LLC
The purpose of this session is to provide an open
exchange of ideas. Remarks made by participants or
members of the audience cannot be quoted or attributed
to the individual or their company unless express
permission has been granted by the individual and
their company. Any record of remarks, discussion, or
photographs may not be used unless express permission
has been granted by the individual and their company.
SAE International’s
Scholarly Journals
Our scholarly journals serve as your ideal collection
of comprehensive engineering research – saving you
time, increasing your productivity, and keeping you
competitive in your field.
They are collected into eight content-specific titles covering:
• Aerospace
• Commercial Vehicles
• Passenger Cars – Electronic and Electrical Systems
• Passenger Cars – Mechanical Systems
• Engines
• Fuels and Lubricants
• Materials and Manufacturing
• Alternative Powertrains
www.saejournals .org
P120342
52
TIME
D0-07B
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
D0-04AB
Processes, Methods, and Tools for
Cyber-Security-Aware Automotive
Embedded Systems (AE321)
Meeting reliability, Design, quality and
safety requirements for electrical/electronic
systems becomes more challenging every
year as E/E content, complexity, timeto-market and globalization pressures
increase. This session focuses on intelligent
practices for achieving high reliability. New
approaches and techniques for integrating
robust design and robustness validation
into the mainstream global automotive
electronics product development and
manufacturing processes are discussed.
Technical papers and/or presentations
offered in this session will portray the latest
developments and proposals for In-Vehicle
Networks. Typical subjects covered are:
new protocols, gateways, vehicle control,
message handling, X-by-wire, diagnostics,
off-board connectivity and vehicle-to-vehicle
or vehicle-to-infrastructure communications.
This session focuses on processes,
methods, and tools for the design, analysis,
and synthesis of cyber secure automotive
embedded systems. The analysis aspect
shall cover static code analysis methods
and tools for analyzing the vulnerabilities
of embedded software (application and
platform) prior to their deployment on the
target HW. In addition, the analysis shall
cover vulnerabilities in currently and future
automotive communication protocols for
inter and intra-vehicle communications.
This session addresses automotive
requirements, high level system design,
cost analysis, simulation, modeling,
testing, and validation. System includes
components, sub assemblies, computer
based controllers, hardware and software.
The session focuses on intelligent and
efficient approaches to analysis, design (not
detailed design), modeling, measurement,
document management and optimizing
performance. Topics on effect of cost, and
human machine interface are covered.
8:20 a.m. - 9:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 12:20 p.m.
Organizers:
John Day, Automotive Electronics News
Organizers:
Christopher Lupini, Delphi Corp.; Richard D.
Means, Mark Zachos, DG Technologies
Organizers:
Amit Choudhury, ADVICS NA, Inc.; Barbara
J Czerny, Chrysler Group LLC
Organizers:
Subramaniam Ganesan, Oakland Univ.;
Kanaparty Rao, IBES Inc.
LIN Slave Node Position Detection via LIN
Switch Method
Opening Keynote: The Emerging
Importance of Cyber-Physical Security
A Mechanism to Interpret Diesel Fuel
Atomization as it is Injected into an Engine
Combustion Chamber
(2013-01-1184)
(Oral Only)
(2013-01-1411)
Rainer Evers, NXP Semiconductors
Research Center
Badih Ali Jawad, Selin Arslan, Lawrence
Technological Univ.
8:00
a.m.
8:40
a.m.
D0-07A
Automobile Electronics Design
and Systems Reliability (AE302)
Chairpersons:
Edward Griffor
8:20
a.m.
D0-04C
Robustness Testing of Real-Time
Automotive Systems using Sequence
Covering Arrays
Performance Evaluation of the ScalableCAN Integrated In-Vehicle Network
Cylinder Head Intake Flow Analysis
(2013-01-1228)
(2013-01-1182)
(2013-01-1409)
Graciela Becci, Gunwant Dhadyalla,
University of Warwick; Alexandros
Mouzakitis, Jaguar Land Rover; James
Marco, Cranfield University; Andrew David
Moore, QM Systems, Ltd.
Ryo Kurachi, Yang Chen, Hiroaki Takada,
Nagoya University; Masanobu Nishimura,
Satoshi Horihata, Tatsuya Nakajima,
AutoNetworks Technologies, Ltd.
Badih Jawad, Lawrence Technological Univ;
Selin Arslan, Lawrence Technological Univ.
Technical Challenges in Implementing New
Electrical Features on Existing Vehicle
Architecture
Development and Implementation of SAE
J2931 and J2847/2 for DC Charging Digital
Communication
The ARTEMIS SESAMO project
Fatigue Life Improvement through the
“NOVA” Process
(2013-01-1229)
(2013-01-1188)
(Oral Only)
(2013-01-1400)
Ajinkya Chinchwadkar, Alok Khare, General
Motors Technical Center India
Jason D. Harper, Argonne National
Laboratory
Joseph G. D’Ambrosio, Rami Debouk, GM
R&D Center
Mehieddine Rababeh, Badih A. Jawad,
Daw Alwerfalli, Hassan Choucair, Lawrence
Technological University
Adaptive Test System to Improve PCB
Testing in the Automotive Industry
An I-Electric System Architecture for EVs
System Security and System Safety
Engineering: Differences and Similarities
and a System Security Engineering
Process Based on the ISO 26262 Process
Framework
The Study of Wall Y+ of Incompressible
Turbulent Flow Over High Lift Devices Using
CutCell Meshing
(2013-01-1230)
(2013-01-1183)
(2013-01-1419)
(2013-01-1402)
Steffen Ostendorff, Joerg Sachsse, HeinzDietrich Wuttke, Jorge Meza Escobar,
Ilmenau University of Technology
Pedro Neves, Bernardo Ribeiro, Andre
Dias, CEIIA
Barbara J. Czerny, Chrysler Group LLC
Ramadan Ghmati, Tripoli Univ.; Badih
Jawad, Liping Liu, Selin Arslan, Lawrence
Technological Univ.
Robustness Modelling of Complex Systems
– Application to the Initialisation of a Hybrid
Electric Vehicle Propulsion System
Fault Tolerance Characteristics of FlexRay
Central Devices
Vehicle Cyber-Security Approach with
Functional-Safety Concept
Numerical Study of the Aerodynamic
Characteristics of a Multi-Element Airfoil
NACA 23012
(2013-01-1231)
(2013-01-1185)
(Oral Only)
(2013-01-1410)
Ross McMurran, Jaguar Land Rover; R.
Peter Jones, University of Warwick
Amit Gupta, Markus Jochim, Kenneth
Orlando, General Motors Company
America Inc.
Asya Gabbasa, Badih Jawad, Liping Liu,
Effective Voltage Sag Ride Through using
Ultracapacitor for Armored Fighting Vehicle
Application - A case study (Written Only NO Oral Presentation)
Ethernet in the control path: time-critical
services using modern networking
technology
Threat Analysis and Risk Assessment in
Automotive Cyber Security
Improving Engine Performance Through
Intake Design
(2013-01-1226)
(2013-01-1186)
(2013-01-1415)
(2013-01-1404)
Prabhavathy Rajappan, Jaishankar
Cinnasamy, Ulaganathan Shanmuganathan,
Dominic S M, CVRDE, DRDO, Ministry of
Defence
Michael David Johas Teener, Broadcom
Corp.
David Ward, Ireri Ibarra, Alastair Ruddle,
MIRA Ltd
Badih Jawad, Kingman Yee, Selin Arslan,
Liping Liu, Lawrence Technological Univ.
Better Vehicular Security and Safety with
an In-Vehicle Firewall and an Intrusion
Detection and Prevention System
Secure Key Management - A Key Feature
for Modern Vehicle Electronics
Better Vehicle Performance Through
Improved Throttle Response
(Oral Only)
(2013-01-1418)
(2013-01-1401)
Virendra Kumar, Escrypt Inc.
Christian Schleiffer, Marko Wolf, ESCRYPT
GmbH; André Weimerskirch, Lars
Wolleschensky, ESCRYPT Inc.
Badih Jawad, Kingman Yee, Liping Liu,
53
ELECTRONICS
Thursday, April 18 - Morning
ELECTRONICS
TIME
D0-07B
D0-04C
D0-07A
D0-04AB
Automobile Electronics Design
and Systems Reliability (AE302)
Processes, Methods, and Tools for
Cyber-Security-Aware Automotive
Embedded Systems (AE321)
Meeting reliability, Design, quality and
safety requirements for electrical/electronic
systems becomes more challenging every
year as E/E content, complexity, timeto-market and globalization pressures
increase. This session focuses on intelligent
practices for achieving high reliability. New
approaches and techniques for integrating
robust design and robustness validation
into the mainstream global automotive
electronics product development and
manufacturing processes are discussed.
Technical papers and/or presentations
offered in this session will portray the latest
developments and proposals for In-Vehicle
Networks. Typical subjects covered are:
new protocols, gateways, vehicle control,
message handling, X-by-wire, diagnostics,
off-board connectivity and vehicle-to-vehicle
or vehicle-to-infrastructure communications.
This session focuses on processes,
methods, and tools for the design, analysis,
and synthesis of cyber secure automotive
embedded systems. The analysis aspect
shall cover static code analysis methods
and tools for analyzing the vulnerabilities
of embedded software (application and
platform) prior to their deployment on the
target HW. In addition, the analysis shall
cover vulnerabilities in currently and future
automotive communication protocols for
inter and intra-vehicle communications.
This session addresses automotive
requirements, high level system design,
cost analysis, simulation, modeling,
testing, and validation. System includes
components, sub assemblies, computer
based controllers, hardware and software.
The session focuses on intelligent and
efficient approaches to analysis, design (not
detailed design), modeling, measurement,
document management and optimizing
performance. Topics on effect of cost, and
human machine interface are covered.
8:20 a.m. - 9:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 12:20 p.m.
Organizers:
John Day, Automotive Electronics News
Organizers:
Christopher Lupini, Delphi Corp.; Richard D.
Means, Mark Zachos, DG Technologies
Organizers:
Amit Choudhury, ADVICS NA, Inc.; Barbara
J Czerny, Chrysler Group LLC
Organizers:
Subramaniam Ganesan, Oakland Univ.;
Kanaparty Rao, IBES Inc.
Chairpersons:
Edward Griffor
10:20
a.m.
10:40
a.m.
11:00
a.m.
A Deterministic Algorithm for Distributed
Processing in a Vehicle Network
Synchronous Mode Operation in Electrical
Machine with DC Stator Excitation
(2013-01-1181)
(2013-01-1412)
Sudharsan Sundaram, Santosh Malagi,
Sabir Ahmed, Mahindra Two Wheelers Ltd
Sergey P. Gladyshev, Michigan-Dearborn
University; Inina Okrainskaya, South Ural
State University
Optimized Methodology for Evaluation of
Complex Network Architectures
A Virtual Driving Education Simulation
System - Hardware and Software with Pilot
Study
(2013-01-1187)
(2013-01-1407)
Dibyendu Palai, Tata Motors Ltd.
Qimin (Jimmy) Yao, John R. Wagner,
Kim Alexander, Philip Pidgeon, Clemson
University
Three Technologies Paving the Future of the
Mobile Highway
Achieving a Scalable E/E-Architecture Using
AUTOSAR and Virtualization
(Oral Only)
(2013-01-1399)
Keely A. Spillane, Racepoint Group Inc.
Dominik Reinhardt, Dirk Kaule, BMW AG;
Markus Kucera, University of Applied
Science Regensburg
11:20
a.m.
Modeling and Measurement to CustomerSpecific Fuel Cost Estimation
(2013-01-1408)
Brian Fan, Matthew Stevens, Chris Mendes,
Alex Koch, CrossChasm Technologies
11:40
a.m.
Title: Development of Reusable Body and
Comfort Software Functions
(2013-01-1403)
Prakash Kulkarni, KPIT Cummins
Infosystems Ltd.; Raghavendra
Anantharam, Nishant Tholiya, KPIT
Cummins Infosystems Ltd; Claas Bracklo,
Pia Mondal, BMW AG
12:00
p.m.
Efficient Knowledge Management with
an SBA: How Innovative Technology can
Revive Older Ones
(2013-01-1405)
Alexandre Figuiere, Dassault Systemes
10:01
p.m.
10:02
p.m.
Manufacturing Support Design for LowCost Instrument Clusters (Written Only -- No
Oral Presentation)
SMS-Based Operation of Electrical
Appliances (Written Only -- No Oral
Presentation)
(2013-01-1232)
(2013-01-1413)
Sreedhar Thanthry, Delphi Corp.
Qandeel Rehman, National Univ. of Science
and Technology
Impact of Electrical Transients on Functional
Safety - A Special Case of Electrification of
Conventional Vehicle Platforms (Written Only
An Efficient Technique for Reducing the
Cost of Motorcycle ECU-Immobilizer
Subsystem Integration (Written Only -- No
Oral Presentation)
(2013-01-1233)
(2013-01-1414)
Sreegururaj Jayachander, Mahindra &
Mahindra, Ltd.
Sunil Kumar Chippa, Samraj Dhinagar, M/S
TVS Motor Company Limited
54
TIME
Thursday, April 18 - Afternoon
TIME
D0-07A
Vehicle Sensors and Actuators (AE319)
Modern automotive customers need safer vehicles with little or no
impact to the environment. The purpose of this session is to present
the latest research and development on novel sensors, actuators,
and circuits that are critical to deliver the function of today’s complex
automotive systems.
10:00 a.m. - 11:20 a.m.
Organizers:
Chenfang Chang, GM R&D Center; Sanjeev M. Naik, GM
Chairperson:
Sai Rajagopalan, General Motorsas
10:00
a.m.
Olivier Brunel; Frederic Duault, Electricfil Automotive; Jacques Lavy, IFP
Energies nouvelles; Yann Creff, Bilal Youssef, IFPEN
Capacitive Humidity Sensors Using Highly Durable Polyimide Membrane
(2013-01-1337)
Naohisa Niimi, Takahiko Yoshida, DENSO Corporation; Toshiki Isogai,
NIPPON SOKEN, INC.
10:40
a.m.
D0-04C
Expert Panel Discussion: Connected Vehicle
Technology Transforming Transportation (AE331)
Connected Vehicle Technology, called V2X wireless, enables a range
of exciting vehicle- to-vehicle (V2V) and Infrastructure-to-vehicle (I2V)
applications that will transform safety and improve mobility. Research
and large-scale pilots are underway around the world to prove-out these
cooperative systems. This panel gives an overview on the progress
of V2X development across the globe. Now that V2X technology is
on roads there is much to learn from the early pilots of this important
technology.
1:00 p.m. - 3:00 p.m.
Smart Soot Sensor for Particulate Filter OBD
(2013-01-1334)
10:20
a.m.
ELECTRONICS
Moderators:
Gregory D. Krueger, SAIC
Panelists:
Farid Ahmed-Zaid, Ford Motor Company
Roger Berg, DENSO International America Inc.
Walton L. Fehr, US Dept. of Transportation
Paul Gray, Cohda Wireless
Michael R. Lukuc, US Dept. of Transportation
Sensor less Wash Fluid Detection in Automotive Application.
(2013-01-1338)
Sidharth Gupta, Tata Motors, Ltd.
11:00
a.m.
Design of Seat Mounted ECG Sensor System for Vehicle Application
(2013-01-1339)
Kazuhiro Sakai, Kenichi Yanai, Shuntaro Okada, Katsuyoshi Nishii,
DENSO Corporation
10:01
p.m.
Real Time Vehicular Camera Vision Acquisition System Using Field
Programmable Gate Array (FPGA) (Written Only -- No Oral Presentation)
(2013-01-1340)
Shikher Saluja, Delphi Electronics & Safety; Komal Agrawal, VIT;
K KSivasankaran, VLSI - VIT University; Lakshmi Bandlamudi,
Chandrakantha Ursu, Active Safety Engineering LLC
Planned by Electrical and Electronic Systems Committee / Automobile
In an effort to collect more evaluation ratings for the technical session speakers, SAE will be holding
daily drawings for anyone who completes an oral evaluation card distributed in technical session
rooms. Simply complete the card, tear off the perforation with your name and contact number, and
turn it in to the session moderator. Six (6) winners will be announced daily to receive prizes. Winners
will be announced daily and posted in the technology lounges.
55
ELECTRONICS
Electronics
EXHIBITOR LIST
AS OF MARCH 20, 2013
Advanced Cooling Technologies Inc......901
Applus IDIADA.....................................1019
Delphi ...................................................207
DG Technologies...................................814
dSPACE Inc...........................................401
Hong Kong Trade Development
Council...............................................602
IAV Automotive Engineering Inc............819
Intrepid Control Systems Inc...............1103
JVIS USA LLC.......................................331
Lotus Engineering................................1031
Government of Macedonia....................606
National Research Council Canada.......903
Prestolite ..............................................418
Shenzhen Shunhe Electric Technology
Co Ltd................................................437
Smartstone (Shanghai) Sensing &
Control Tech.....................................1314
Software Cradle.....................................802
Transtek Magnetics Inc..........................800
TRUWIN..............................................1137
Helping industry engineer safe vehicles
•
SAE J2478TM, Proximity Type Lane Change Collision Avoidance
•
Intelligent Vehicle Initiative (IVI) Technology Advanced Controls and Navigation Systems,
2011 SAE Paper Collection (Online, COLL-TP-00128)
•
J2830TM, Process for Comprehension Testing of In-Vehicle Icons
•
Object Detection, Collision Warning and Avoidance Systems, Volume 2 (Book PT-133)
•
Driver-Vehicle Interaction, SAE Standards Subscription (Online, SUB-STD-00010)
•
J2395TM, ITS In-Vehicle Message Priority
•
Performance Metrics for Assessing Driver Distraction: The Quest for Improved Road
Safety (Book R-402)
•
Autonomous Connected Vehicle Technologies (Seminar)
•
SAE J2400TM, Human Factors in Forward Collision Warning Systems: Operating
Characteristics and User Interface Requirements
•
Automotive Antenna Design and Applications (Book B-880)
•
SAE Intelligent Vehicle Systems Symposium - Advancing the Connected Mobility
Experience
•
SAE J2364, J2365 & J2378TM, In-Vehicle Navigation and Route Guidance Standards
while Driving
•
SAE Convergence® Conference & Exhibition, Detroit, MI, USA
•
Active Safety and the Mobility Industry (Book PT-147)
•
J2735TM, Dedicated Short Range Communications (DSRC) Message Set Dictionary
Advanced Safety
Standards & Resources
from SAE International
Driver Vehicle Interface
Collision Avoidance & Mitigation
Vehicle Communications
Solutions to safe, connected vehicles can be complex and costly. SAE International
can help the automotive industry find these solutions. Providing a neutral forum for
the development of needed engineering guidelines, the collective wisdom and thought
leadership of the volunteers on its standards development committees can help
industry advance these technologies, increase productivity, and reduce costs. With a
106-year history steeped in functional safety standards, SAE stands ready to tackle
the complex advanced safety issues of today. Offering one of the largest libraries of
intellectual property focused on mobility technology, the past and current work of
the global engineering community can be referenced for designing, developing, and
implementing the next generation of safety systems to save lives, prevent injuries, and
reduce economic costs due to road traffic crashes.
For more SAE Advanced Safety Standards &
Resources, visit sae.org/standardsdev/safety/
1-877-606-7323 (US, Canada)
1-724-776-4970 (outside US, Canada)
P130099
56
The industry’s most
credible content source
Delivering technical and business intelligence on the status
of vehicle electrification worldwide
Designed specifically for professionals and businesses,
the Global Technology Library – Electric Vehicle:
•
Reduces information
overload
•
Saves time
& resources
•
Provides timely
access to data
This subscription-based library selects and aggregates current information and
provides it to you in a platform which enables you to browse, search and share
content quickly and easily. Daily feeds give you up-to-date alerts on what you need
to know about the world of electric vehicles.
The SAE Global Technology Library – Electric Vehicle
is the premier online content catalogue that includes:
Standards
Technical Papers
Regulations
Reports
Books
News & Events
Market Research
Reports
Test drive it today! Sign up for a FREE two-week trial!
Visit www.saegtl.org/ev or call 1.724.772.4086 for more information.
Coming Soon!
Watch for the Global Technology Library - Alternative Fuels
P135105
Emissions/Environment/Sustainability
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
Advanced Catalysts and Substrates (PFL400)
-
-
-
-
4
-
O2-43
69
Advances in Alternative Energy Sources for Sustainable
Development in the Transportation Sector (SDP110)
-
-
-
-
-
4
D0-03A
73
Chat with the Expert - LD/HD Future Emission Technologies
(PFLCHAT420)
-
-
-
-
-
4
W2-60
73
Climate Control (Part 1 & 2) (HX104)
-
-
-
-
4
4
O2-37
69, 73
4
-
-
-
-
-
O2-37
59
Emissions Measurement and Testing (PFL408)
-
-
-
4
-
-
W2-66
66
Energy Efficiency of Thermal Systems (HX103)
-
-
-
-
-
O2-38
60, 61
-
-
-
-
O3-46
59, 60, 61
E2T Environmental Award - Nomination Presentations (SDP108)
Exhaust Emission Control: New Developments (Part 1 & 2) (PFL404)
4
4
4
Exhaust Emission Control: Particulate Filter Systems (Part 1 & 2)
(PFL402)
4
4
-
-
-
-
O3-45
59. 60, 61
Exhaust Emission Control: Modeling (Part 1 & 2) (PFL407)
-
-
-
-
4
4
O3-46
71, 73
Exhaust Emission Control: Particle Filter Substrates (PFL406)
-
-
-
-
-
O3-45
63
Exhaust Emission Control: SCR (Part 1 & 2) (PFL405)
-
-
4
4
4
-
-
O3-46
63, 66
Exhaust Emission Control: System Integration and Durability (PFL401)
-
4
-
-
-
-
O2-43
60, 61
Gaseous Engine Emissions (PFL411)
-
-
-
-
4
-
O2-43
71
In-Use and On-Board Emissions Measurement (PFL410)
-
-
-
-
-
4
O2-43
75
LCA and Sustainability (SDP113)
-
-
-
-
4
-
D0-03A
69
Panel Discussion: Landfill Free Attainment Best Practices (SDP120)
-
-
4
-
-
-
D3-22
63
Particle Emissions from Combustion Sources (Part 1 & 2) (PFL409)
-
-
-
4
4
-
O3-45
66, 69
Sustainable Materials and Components (SDP111)
-
4
-
-
-
-
O2-37
62
Sustainable and Energy Efficient Manufacturing (SDP109)
-
-
-
4
-
-
O2-37
66
Thermal Systems Components (HX101)
-
-
-
-
4
-
O2-38
71
Thermal Systems Modeling and Simulation (Part 1 & 2) (HX102)
-
-
4
4
-
-
O2-38
63, 68
Thermal Systems for Hybrid and Electric Vehicles (HX105)
4
-
-
-
-
-
O2-38
59
Vehicle Electrification Strategies for Sustainability (SDP117)
-
-
4
-
-
-
O2-37
65
Environment/Emissions Notepads
Sponsored by
58
TIME
O2-37
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
O2-38
O3-45
E2T Environmental Award Nomination Presentations
(SDP108)
Exhaust Emission Control: New
Developments (Part 1 of 2)
(PFL404)
Thermal Systems for Hybrid and
Electric Vehicles (HX105)
Exhaust Emission Control:
Particulate Filter Systems (Part 1
of 2) (PFL402)
This session brings together the finalist of the
Environmental Excellence in Transportation
awards for the selection of an overall winner.
Their presentations will highlight what has
been developed as a process, technology,
methodology or educational training that
has given their company or community an
environmental and cost advantage. The
Sustainable Development Program Committee
monitors this award. Please see http://www.
sae.org/news/awards/list/e2t/ for more details.
Papers are invited for this session that
describes technology developments and
the integration of these technologies into
new emission control systems. Topics
include the integration of various diesel
particulate matter (PM) and diesel Nitrogen
Oxide (NOX) reduction technologies plus
the analogous technologies for the growing
population of direct injection gasoline
engines. Novel developments in sensors
and control systems will also be considered.
The purpose of this session is to share
experiences and lessons learned to
advance the technology in the field of
thermal management of electric and hybrid
vehicle systems. This session presents
papers covering both testing and simulation
of hybrid and electric vehicle thermal
systems.
Papers are invited for this session covering
various aspects of Particulate Filter (PF)
systems including the accumulation and
oxidation of particulate matter within
the PF, the performance of different PF
technologies, and their use with different
fuel specifications, engine technologies and
testing protocols. Papers are also invited
on novel PF construction techniques and
materials and new regeneration strategies.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 11:50 a.m.
10:30 a.m. - 11:30 a.m.
Organizers:
Sujit Das, Oak Ridge National Laboratory;
Nakia Simon, Chrysler Group LLC
Organizers:
Kenneth S. Price, Umicore Autocat USA
Inc.; Ronald Silver, Caterpillar Inc.; Marek
Tatur, Roger A. Van Sickle, FEV Inc.
Organizers:
Ales Alajbegovic, Exa Corporation; Alaa ElSharkawy, Chrysler Group LLC; John Rugh,
National Renewable Energy Laboratory
Organizers:
Matthew Leustek, Caterpillar Inc.; Jerry
Liu, Cummins Emission Solutions; Andrea
Strzelec; Matthew Thornton, National
Renewable Energy Laboratory; Andrew P.
Walker, Johnson Matthey Inc.
EffShip
Vehicular Emissions in Review
Heating Comfort and Range Perfectly Combined
- Heating Systems for Vehicles with Alternative
Drive System. Prospects and Challenges of
Biofuel-Operated Water and Air Heaters
(Oral Only)
(2013-01-0538)
(2013-01-0240)
Björn Allenström, SSPA Sweden AB
Timothy Johnson, Corning Incorporated
Robert Apfelbeck, Frank Barthel, Eberspaecher
Chairpersons:
Claudia Duranceau, CD Technical LLC;
Susan Sawyer-Beaulieu, Univ. of Windsor
9:30
a.m.
O3-46
The World Leader for ZEVs, Clean Cars and
Low Emissions
Utilization of Ice Storage in Secondary Loop
Automotive Air-Conditioning Systems
(Oral Only)
(2013-01-0235)
Thomas Cackette, California Air Resources
Board
Magnus Eisele, Yunho Hwang, Reinhard
Radermacher, University of Maryland School
of Engineering
SAE Standards J2601
Li-ion Air-Cooled Battery System
Interactions With the Vehicle HVAC System
(Oral Only)
(2013-01-0242)
Jesse Schneider, BMW, Chair SAE J2601
Karl William Steffke, Ciro Spigno, General
Motors LLC; Charles Bezzina, GM Truck Group
High Efficiency Gasoline Engine with High
Compression Ratio
Estimated Cost of Emission Control
Technologies for Light-Duty Vehicles Part
1 - Gasoline
Reducing Temperature Gradients in HighPower Lithium-Ion Cells through Ultra-High
Thermal Conductivity Heat Spreaders
Embedded in Cooling Plates for Battery
Systems with Indirect Air or Liquid Cooling
Experimental Study of Thermal Aging
on Catalytic Diesel Particulate Filter
Performance
(Oral Only)
(2013-01-0534)
(2013-01-0234)
(2013-01-0524)
Mitsuo Hitomi, Mazda Motor Corp.
Francisco Posada, Anup Bandivadekar,
John German, International Council on
Clean Transportation
Kim F. Yeow, Ho Teng, AVL Powertrain
Engineering Inc.
Dimitrios Zarvalis, Souzana Lorentzou,
Theofilaktos Akritidis, Leonidas
Chasapidis, CERTH/CPERI; Athanasios
G. Konstandopoulos, CERTH/CPERI and
Aristotle University
Wellman Engineering Resins - EcoLon
Intensification of Catalytic Aftertreatments
Systems for Mobile Applications
ICE Project: Mobile Air-Conditioning System
Based on Magnetic Refrigeration
In-Situ Optical Analysis of Ash Formation
and Transport in Diesel Particulate
Filters During Active and Passive DPF
Regeneration Processes
(Oral Only)
(2013-01-0530)
(2013-01-0238)
(2013-01-0519)
Robert Fotsch, Wellman Plastics Recycling
Teuvo Maunula
Bárbara Torregrosa-Jaime, Jorge Payá,
Jose Corberan, Universitat Politècnica de
València; Carloandrea Malvicino, Fausto Di
Sciullo, Centro Ricerche Fiat Scpa
Alexander Sappok, Ifran Govani, Carl Kamp,
Yujun Wang, Victor Wong, Massachusetts
Institute of Technology
Emissions of PCDD/Fs, PCBs, and PAHs
from a Modern Diesel Engine Equipped with
Selective Catalytic Reduction Filters
Application of Magnetocaloric Heat Pumps
in Mobile Air-Conditioning
Characteristics of Soot Oxidation at the
Interface between Soot and Silicon-OxyCarbide with Embedded Single Nanosized
Pt Particles
(2013-01-1778)
(2013-01-0239)
(2013-01-0516)
Christopher A. Laroo, Charles Schenk,
James Sanchez, Joseph McDonald, Peter
Smith, US Environmental Protection Agency
Bárbara Torregrosa-Jaime, Universitat
Politècnica de València; Carmen
Vasile, Michel Risser, INSA Strasbourg;
Christian Muller, Cooltech Applications;
Jose Corberan, Jorge Payá, Universitat
Politècnica de València
Keisuke Nakamura, Hiroshi Oki, Ryoko
Sanui, Tokyo Institute of Technology;
Nobuhiro Hidaka, Masamichi Tanaka,
Sumitomo Osaka Cement Co., Ltd.; Hiroaki
Matsumoto, Hitachi High-Technologies
Corporation; Katsunori Hanamura, Tokyo
11:10
a.m.
11:30
p.m.
Numerical Analysis of Energy Efficiency of
Zone Control Air-Conditioning System for
Electric Vehicle using Numerical Manikin
(2013-01-0237)
Hideaki Nagano, Ikuto Miyamoto, Itsuhei
Kohri, Tokyo City University
Planned by Sustainable Development
Program Committee / Engineering Meetings
Board
Planned by Exhaust Aftertreatment and
Emissions Committee / Powertrain Fuels
and Lubricants Activity
Planned by Thermal Management Activity /
EMB Land and Sea Group
59
TIME
O2-38
1:00
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
60
O3-45
O2-43
Energy Efficiency of Thermal
Systems (HX103)
(PFL404)
of 2) (PFL402)
System Integration and Durability
(PFL401)
Proper thermal management can
significantly contribute to overall system
energy efficiency. This session highlights
the latest developments in thermal
management energy efficiency.
Papers in this session cover various aspects
of exhaust emissions system integration and
durability, including the durability of particulate
filters and exhaust catalysts (oxidation,
reduction, and combinations thereof). It
also includes mechanisms of performance
degradation and possible mitigation
strategies, data from field tests, analysis of
aged catalysts and filters, laboratory and
accelerated on-engine aging studies, and
relevant experimental tools and methodology.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Ronald Semel, General Motors; Gursaran D.
Mathur, CalsonicKansei North America Inc.
Organizers:
Organizers:
Liu, CUMMINS EMMISSION SOLUTIONS;
Andrea Strzelec; Matthew Thornton,
National Renewable Energy Laboratory;
Andrew P. Walker, Johnson Matthey Inc.
Organizers:
Eric Corrigan, Corning Inc.; Pradeep
Prasad, Cummins Emission Solution;
Aleksey Yezerets, Cummins Inc.
Technical Keynote: Presentation
An Investigation of Diesel EGR Cooler
Fouling and Effectiveness Recovery
Adaptive Temperature Control for Diesel
Particulate Filter Regeneration
Effectiveness of Diesel Oxidation Catalyst
in Reducing HC and CO Emissions from
Reactivity Controlled Compression Ignition
(Oral Only)
(2013-01-0533)
(2013-01-0517)
(2013-01-0515)
Christopher P. Thomas, BorgWarner Inc.
Anil Singh Bika, Univ. of Minnesota-Twin
Cities; Alok Warey, Patrick Szymkowicz,
Sandro Balestrino, David Long, General
Motors Company
Javier Castellano, Ford Motor Company;
Anita Chaudhari, Altran; Jim Bromham,
Ford Motor Company
Vitaly Y. Prikhodko, Scott J. Curran, James
E. Parks, Robert M. Wagner, Oak Ridge
National Laboratory
Cold Start Concept (CSC™): A Novel
Catalyst for Cold Start Emission Control
Diesel Emissions with DPF & SCR
and Toxic Potentials with BioDiesel (RME)
Blend Fuels
Impact of Different Forms of Sulfur
Poisoning on Diesel Oxidation Catalyst
Performance
1:20
p.m.
1:40
p.m.
O3-46
(2013-01-0535)
(2013-01-0523)
(2013-01-0514)
Hai-Ying Chen, Shadab Mulla, Erich
Weigert, Kenneth Camm, Todd Ballinger,
Julian Cox, Phil Blakeman, Johnson
Matthey Inc.
Jan Czerwinski, Univ. of Applied Sciences
Biel-Bienne; Panayotis Dimopoulos
Eggenschwiler, Adm Norbert Heeb, EMPA;
Covadonga Astorga-Ilorens, JRC (Joint
Research Centre); Andreas Mayer, TTM; Armin
Heitzer, Erdöl-Vereinigung; Giovanni D’Urbano,
BAFU; Sandra Hermle, BFE; Stephan Renz,
Renz Consulting; Anthi Liati, EMPA
Junhui Li, Ashok Kumar, Xu Chen, Neal
Currier, Aleksey Yezerets, Cummins Inc.
An Approach to Develop Energy Efficient
Operation Strategies and Derivation of
Requirements for Vehicle Subsystems Using
the Vehicle Air Conditioning System as an
Example
Development of Highly Efficient Lean NOx
Catalyst System in Low Exhaust Gas
Temperature
Non-Thermal Particulate Filter Regeneration
Using Rapid Pulse Electric Discharges
Hydrocarbon Storage on Small-Pore CuZeolite SCR Catalyst
(2013-01-0568)
(2013-01-0536)
(2013-01-0518)
(2013-01-0508)
Michael Fritz, Frank Gauterin, Michael
Frey, Justus Wessling, Karlsruhe Institute
of Technology (KIT); Enrico Wohlfarth, Ralf
Oberfell, Daimler AG
Yuichi Matsuo, Shinya Ishimaru, Masato
Amano, Nobuhiro Komatsu, Satoshi
Aoyagi, Hiroyuki Dan, Tetsuo Endo, Yoshiaki
Matsuzono, Honda R&D Co., Ltd.; Tomoaki Ito,
Makoto Nagata, N.E. Chamcat Corporation
Alex Mason, Jon G.P. Binner, Colin P.
Garner, Karola Graupner, John E. Harry,
Dave W. Hoare, Andrew M. Williams,
Loughborough University; Nick Fox, 3DXRay Ltd
Ashok Kumar, Krishna Kamasamudram,
Aleksey Yezerets, Cummins Inc
Effects of Air Conditioner Use on RealWorld Fuel Economy
Development of a Sulfur Tolerant PGM
Based Zeolite Catalyst for Methane
Oxidation and Low Temperature
Hydrocarbon Trapping
An Experimental Investigation into
Particulate Matter Oxidation in a Catalyzed
Particulate Filter with Biodiesel Blends on an
Engine during Active Regeneration
Impact of Biodiesel Metal Impurities
on the Durability of a Light Duty Diesel
Aftertreatment System
(2013-01-0551)
(2013-01-0531)
(2013-01-0521)
(2013-01-0513)
Shean Huff, Brian West, John Thomas, Oak
Ridge National Laboratory
Alexander Guliaeff, Klaus Wanninger, Frank
Klose, Gerd Maletz, Arno Tissler, Clariant
Produkte (Deutschland) GmbH
James Pidgeon, John Johnson, Jeffrey
Naber, Michigan Technological University
Aaron Williams, Jonathan Burton, Robert
L. McCormick, National Renewable
Energy Laboratory; Todd Toops, Andrew
A. Wereszczak, Ethan E. Fox, Michael J.
Lance, Oak Ridge National Laboratory;
Giovanni Cavataio, Douglas Dobson, Jim
Warner, Ford Motor Co; Rasto Brezny,
Manufacturers of Emission Controls
Assoc; K. Nguyen, D. William Brookshear,
University of Tennessee - Knoxville
Impact of Solar Control PVB Glass
on Vehicle Interior Temperatures, AirConditioning Capacity, Fuel Consumption,
and Vehicle Range
Development of the NOx Emission
Model for the Heavy Duty Diesel
Engine Application Using Combustion
Characteristic Parameters
NO2-Formation in Diesel Particle Filter
Systems
Field Testing of High Biodiesel Blends on
Engine and Aftertreatement Durability,
Performance, and Maintenance in an OnHighway Application
(2013-01-0553)
(2013-01-0532)
(2013-01-0526)
(2013-01-0511)
John Rugh, Larry Chaney, Laurie Ramroth,
Travis Venson, National Renewable Energy
Laboratory; Matthew Rose, Eastman
Chemical
Navtej Singh, Prasanna NagabushanVenkatesh, Eduardo Nigro, Adam Lack,
Navistar Inc.
Jan Czerwinski, Yan Zimmerli, Claudio
Chiesura, Univ. of Applied Sciences BielBienne; Andreas Mayer, TTM; Jacques
Lemaire, AEEDA; Giovanni D’Urbano, BAFU
Matthew Leustek, Sylvain Charbonnel,
Jared Parsons, Hind Abi-Akar, Caterpillar
Inc.
Selecting an Expansion Machine for Vehicle
Waste-Heat Recovery Systems Based on
the Rankine Cycle
GDI Engine Performance and Emissions
with Reformed Exhaust Gas Recirculation
(REGR)
Passive Regeneration Response
Characteristics of a DPF System
Characterization and Ranking of Materials
for Exhaust Systems Under Thermal-Cycling
Condition
(2013-01-0552)
(2013-01-0537)
(2013-01-0520)
(2013-01-0512)
Gunnar Latz, Sven Andersson, Karin
Munch, Chalmers Univ. of Technology
Daniel Fennell, Jose M. Herreros,
Athanasios Tsolakis, Hongming Xu,
University of Birmingham; Kirsty Cockle,
Paul Millington, Johnson Matthey PLC
Adam Kotrba, Timothy P. Gardner, Ling Bai,
Argun Yetkin, Tenneco Inc
Zhigang Wei, Tenneco Automotive Co., Ltd.;
Dmitri Konson, Deborah Clark, Limin Luo,
Shengbin Lin, Fulun Yang, Tenneco Inc
TIME
O2-38
3:00
p.m.
3:20
p.m.
3:40
p.m.
10:01
p.m.
10:02
p.m.
O3-46
O3-45
O2-43
Energy Efficiency of Thermal
Systems (HX103)
(PFL404)
of 2) (PFL402)
System Integration and Durability
(PFL401)
Proper thermal management can
significantly contribute to overall system
energy efficiency. This session highlights
the latest developments in thermal
management energy efficiency.
Papers in this session cover various aspects
of exhaust emissions system integration and
durability, including the durability of particulate
filters and exhaust catalysts (oxidation,
reduction, and combinations thereof). It
also includes mechanisms of performance
degradation and possible mitigation
strategies, data from field tests, analysis of
aged catalysts and filters, laboratory and
accelerated on-engine aging studies, and
relevant experimental tools and methodology.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Ronald Semel, General Motors; Gursaran D.
Mathur, CalsonicKansei North America Inc.
Organizers:
Organizers:
Liu, CUMMINS EMMISSION SOLUTIONS;
Andrea Strzelec; Matthew Thornton,
National Renewable Energy Laboratory;
Andrew P. Walker, Johnson Matthey Inc.
Organizers:
Eric Corrigan, Corning Inc.; Pradeep
Prasad, Cummins Emission Solution;
Addressing the Heat Exchange Question for
Thermo-Electric Generators
Impact of Ambient Temperature on
Gaseous and Particle Emissions from a
Direct Injection Gasoline Vehicle and its
Implications on Particle Filtration
CAE Dynamic Durability Simulation of
Exhaust System
(2013-01-0550)
(2013-01-0527)
(2013-01-0510)
Anusha Wijewardane, Richard Stobart,
Loughborough Univ.
Tak W. Chan, Eric Meloche, Environment
Canada; Joseph Kubsh, Rasto Brezny,
Manufacturers of Emission Controls
Assoc; Deborah Rosenblatt, Greg Rideout,
Environment Canada
Amir Ghasemi, Eberspaecher North
America Inc; Ming Dong, Eberspacher
KG; Lakshmikanth Meda, Martin Romzek,
Eberspaecher North America Inc
Influence of Heat Pipe Operating
Temperature on Exhaust Heat
Thermoelectric Generation
Detailed Investigation of Soot Deposition
and Oxidation Characteristics in a Diesel
Particulate Filter Using Optical Visualization
Development of Corrosion Test Procedure
for Automotive Exhaust System
(2013-01-0559)
(2013-01-0528)
(Oral Only)
F. P. Brito, L.M. Goncalves, Jorge Martins,
Nuno Antunes, Diogo Sousa, Universidade
do Minho
Seungmok Choi, Kyeong Lee, Argonne
National Laboratory
Hyunmin Ahn, Hyunmin Ahn
Advanced Thermal Management of a Light
Duty Diesel Vehicle
Soot Loading Estimation Accuracy
Improvement by Filtration Layer Forming On
DPF and New Algorithm of Pressure Loss
Measurement
(2013-01-0546)
(2013-01-0525)
John Shutty, Wolfgang Wenzel, BorgWarner
Inc.; Michael Becker, Stephen Bohan, Glenn
Kowalske, BorgWarner Inc
Kazutake Ogyu, Takashi Yamakawa,
Yasuhiro Ishii, Daisuke MInoura, Yuichi
Nagatsu, Takafumi Kasuga, Ibiden Co., Ltd.;
Kazushige Ohno, Ibiden Co Ltd
Research on the Optimization of Hybrid
Electric Vehicle Heating-Up Process
Gasoline - Ignition Improver - Oxygenate
Blends as Fuels for Advanced Compression
Ignition Combustion (Written Only -- No Oral
Presentation)
(2013-01-0574)
(2013-01-0529)
Tinghui Hu, Kathrien Inderwisch,
Rashad Mustafa, Ferit Küçükay, IAE, TU
Braunschweig
Lei Zhou, M.D. Boot, L.P.H. de Goey,
Eindhoven University Of Technology
Developing the AC17 Efficiency Test for
Mobile Air Conditioners (Written Only -- No
Oral Presentation)
Visualization and Analysis of Condensation
in Exhaust Gas Recirculation Coolers
(2013-01-0569)
(2013-01-0540)
Fred Sciance, General Motors Company;
Brian Nelson, EPA; Mahmoud Yassine,
Chrysler Group LLC; Angelo Patti, Ford
Motor Co; Leela Rao, California Air
Resources Board
Alok Warey, David Long, Sandro Balestrino,
Patrick Szymkowicz, General Motors
Company; Anil Singh Bika, Univ of
Minnesota-Twin Cities
10:03
p.m.
Estimated Cost of Emission Control
Technologies for Light-Duty Vehicles Part 2 Diesel (Written Only -- No Oral Presentation)
(2013-01-0539)
Francisco Posada, Anup Bandivadekar,
John German, International Council on
Clean Transportation
61
TIME
O2-37
Sustainable Materials and
Components (SDP111)
This session delves into various areas
surrounding topics that relate to a material
or component’s ability to be considered
sustainable. These topics include but are
not limited to advance material recycling
technologies, remanufacturing and
serviceability, materials or components
reuse, as well as reduction and/or
elimination of substances of concern and
volatile organic compound.
1:00 p.m. - 3:00 p.m.
Organizers:
Deepak Gupta, Southeast Missouri State
Univ.; Bhaskaran Gopalakrishnan, West
Virginia Univ.; Susan Sawyer-Beaulieu, Univ.
of Windsor
Chairpersons:
Univ.; Bhaskaran Gopalakrishnan, Subodh
Chaudhari, West Virginia Univ.
Moderators:
Virginia Univ.
1:00
p.m.
Technical Keynote: A Business Perspective
on Sustainable Manufacturing
(Oral Only)
Roberto Lu, TE Connectivity
1:20
p.m.
Alternative Porous Media and Designs for
Automotive Oil Filters
(2013-01-0492)
Yiannis A. Levendis, Northeastern Univ.
1:40
p.m.
Study on the Prediction of VOC
Concentration in Vehicle Cabins (1)
Investigation of Relationship between
Toluene Concentrations and Evaluation
Conditions using Interior Parts
(2013-01-0490)
Machiko Azuma, Hiroshi Kubo, Akio Amari,
Toyota Boshoku Corporation; Koichiro Iwai,
Kazumi Hayakawa, Yumi Motoyama, Hiroshi
Ito, Takao Imaeda, Toyota Central R&D
Labs., Inc.
2:00
p.m.
Study on the Prediction of VOC
Concentration in Vehicle Cabins (2)
Development of Labeled Compound
Addition Method
(2013-01-0491)
2:20
p.m.
TECHNICAL PAPER
COLLECTIONS
Designed for the individual with a specific research need,
SAE Collections are assembled from technical papers
authored from a SAE session, are directly related to a
specific topic or technology, and are available online
anytime through MyLibrary.
Titles include:
Thermal Systems Components, 2013
Thermal Systems Modeling and Simulation, 2013
Energy Efficiency of Thermal Systems, 2013
Climate Control, 2013
Exhaust Emission Control, 2013
Exhaust Emission Control Modeling, 2013
Emissions Measurement and Testing, 2013
Particle Emissions from Combustion Sources, 2013
Koichiro Iwai, Kazumi Hayakawa, Yumi
Motoyama, Hiroshi Ito, Takao Imaeda,
Toyota Central R&D Labs., Inc.; Machiko
Azuma, Hiroshi Kubo, Akio Amari, Toyota
Boshoku Corporation
Advances in Alternative Energy Sources for Sustainable
Developments, 2013
Avoiding False Positive Asbestos Analysis in
Polymer Matrix Composite Brake Linings
LCA and Sustainability, 2013
(2013-01-0493)
Ruth Hinrichs, Geosciences Institute,
UFRGS, Brazil; Marcos A.Z. Vasconcellos,
Physics Institute, UFRGS, Brazil
2:40
p.m.
New SAE
2013 World Congress
Emissions
Biobased ECO+ Solutions from DSM
Vehicle Electrification Strategies for Sustainability, 2013
(Oral Only)
Emile Homsi, DSM
Board
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
P135217
62
TIME
O3-45
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
O3-46
D3-22
O2-38
Exhaust Emission Control: Particle Exhaust Emission Control: SCR
Filter Substrates (PFL406)
(Part 1 of 2) (PFL405)
Panel Discussion: Landfill Free
Thermal Systems Modeling and
Attainment Best Practices (SDP120) Simulation (Part 1 of 2) (HX102)
Papers are presented in this session
covering both diesel and gasoline
particulate filters in terms of developing
substrates with lower pressure drop,
improved thermal stress resistance, new
substrate materials and new test methods
to evaluate the mechanical properties of the
ceramic materials.
Papers cover the Selective Catalytic
Reduction (SCR) process, in which a nonhydrocarbon reductant known as Diesel
Exhaust Fluid (DEF) is injected to create
ammonia which reacts with NOX and
converts it into harmless Nitrogen. The
topic includes various aspects of SCR
technology such as different washcoats,
two-way (SCR washcoat on DPF substrate),
aging and poisoning impact on catalyst
performance, importance of DEF injection
and mixing and SCR modeling.
Landfills have led to some of the most
heated, acrimonious battles over pollution
concerns in the public commons that have
ever been seen. The panel will speak about
the understanding of what is possible in the
auto industry where a fully-integrated supply
chain approach to “landfill free” attainment
can be part of a long term strategic plan.
Issues the panel will be prepared to discuss
include education as to what is possible
through direct and indirect attention (best
practices); barriers.
The Thermal Systems Modeling and
Simulation session focusses on state of the
art simulation technologies for modeling
thermal systems and their application in the
development and optimization of vehicle
thermal management and fuel economy.
The papers in the session will range from
empirical, 1D modeling methods to three
dimensional CFD models as well as coupled
methods.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
Kirby Baumgard, John Deere Power
Systems; Thorsten Boger, Corning Inc.;
Julian Tan, Watlow
Organizers:
Brad Adelman, Navistar Inc.; Danan Dou,
John Deere Product Engineering Center;
Magdi Khair; Rahul Mital, General Motors LLC
Organizers:
John J. Bradburn, General Motors LLC; Carol
Henry, George Washington Univ.; Michael D.
Powers, Wellman Engineering Resins
Organizers:
Ales Alajbegovic, Exa Corporation; Gursaran
D. Mathur, CalsonicKansei North America
Inc.; Kumar Srinivasan, Chrysler Group LLC
Size-Dependent Fundamental Filtration
Studies with Novel Porous Media
Thermally Durable Vanadium-SCR Catalysts
for Diesel Applications
Factors Affecting Heat Transfer in a
Diesel Engine: Low Heat Rejection Engine
Revisited
(Oral Only)
(2013-01-1063)
(2013-01-0875)
Xiayun Huang, Texas A&M University;
Andrea Strzelec, Texas A&M Univ.; Nicole
Zacharia, Texas A&M University
Teuvo Maunula, Toni Kinnunen, Kauko
Kanniainen, Arto Viitanen, Auli Savimaki,
Ecocat
Sudhakar Das, Charles E. Roberts,
Assessment of Various DPF Technologies:
Influence on Regeneration, Back Pressure
and Soot Estimation
Removal of Hydrocarbons and Particulate
Matter Using a Vanadia Selective Catalytic
Reduction Catalyst: An Experimental and
Modeling Study
Simulations of a Bottoming Organic Rankine
Cycle (ORC) Driven by Waste Heat in a
Diesel Engine (DE)
(2013-01-0838)
(2013-01-1071)
(2013-01-0851)
Nishant Singh, Silpa Mandarapu, Navistar
Inc.
Timothy C. Watling, Johnson Matthey
Technology Centre; Yaritza Lopez, Jason
D. Pless, Balaji Sukumar, Wassim Klink,
Penelope Markatou, Johnson Matthey ECT
Ge-Qun Shu, Guopeng Yu, Hua tian,
Haiqiao Wei, State Key Lab of Engines;
Xingyu Liang, Tianjin Univ
Durability of Filtration Layers Integrated into
Diesel Particulate Filters
Effect of Hydrothermal Aging on the
Catalytic Performance and Morphology of a
Vanadia SCR Catalyst
Thermodynamic Analysis of a Novel
Combined Power and Cooling Cycle Driven
by the Exhaust Heat Form a Diesel Engine
(2013-01-0837)
(2013-01-1079)
(2013-01-0858)
Hidemasa Iwata, Ibiden Co Ltd; Athanasios
Konstandopoulos, CERTH/CPERI; Kazuki
Nakamura, Takafumi Kasuga, Kazutake
Ogyu, Kazushige Ohno, Ibiden Co Ltd
Yuanzhou Xi, Nathan A. Ottinger, Z. Gerald
Liu, Cummins Emission Solutions
Hua Tian, Tianjin University; Ge-Qun Shu,
HaiQiao Wei, Xingyu Liang, Guopeng Yu,
State Key Lab of Engines
Durability Investigation on Aluminum
Titanate-Diesel Particulate Filter Having
Asymmetric Hexagonal Cell Design
Effect of Injection Parameters on Spray
Characteristics of Urea-SCR System
Numerical Investigation of Buoyancy-Driven
Flow in a Simplified Underhood with Open
Enclosure
(2013-01-0841)
(2013-01-1067)
(2013-01-0842)
Kentaro Iwasaki, Sumika Ceramics Poland
Sp.z o.o.; Takumi Shibuta, Sumitomo
Chemical Co.Ltd.
Xian Shi, Jun Deng, Zhijun Wu, Liguang Li,
Tongji University
Kuo-Huey Chen, General Motors Company;
James Johnson, General Motors Company
(retired); Parviz Merati, Charles Davis,
Western Michigan Univ.
Development of High Porosity SiC-DPF
Which Is Compatible with High Robustness
and Catalyst Coating Capability for SCR
Coated DPF Application
A Development of Urea Solution Injection
Quantity Decision Logic for SCR System
A Numerical Methodology to Compute
Temperatures of a Rotating Cardan Shaft
(2013-01-0840)
(2013-01-1069)
(2013-01-0843)
Kazutake Ogyu, Toyoki Ogasawara, Hiroki
Sato, Keiji Yamada, Kazushige Ohno, Ibiden
Co., Ltd.
Jiho Cho, Jinha Lee, Seokjae Kim,
Sunghoon Bang, Jong Ik Chun, Jung Whun
Kang, Seungbeom Yoo, Hyundai Motor Co.
Heinrich Reister, Ernst Peter Weidmann,
Daimler AG; Thomas Walker, Sachin
Badarayani, CD-adapco
The Effect of an Open Channel Filter on Particle
Emissions of A GDI Passenger Car during
Transient Engine Operation Measured both On
a Chassis Dynamometer and On Road
High Speed Video Measurements with
Water of a Planar Laser Illuminated Heated
Tip Urea Injector Spray
Numerical Simulation of the Transient Heatup of a Passenger Vehicle During a Trailer
Towing Uphill Drive
(2013-01-0839)
(2013-01-1073)
(2013-01-0873)
Matti Happonen, Pekka Matilainen, Kauko
Kanniainen, Toni Kinnunen, Ecocat Oy; Panu
Karjalainen, Juha Heikkilä, Topi Ronkko, Jorma
Keskinen, Tampere Univ of Technology; Tero
Lähde, Antti Malinen, Liisa Pirjola, Metropolia
Univ of Applied Sciences; Theodoros
Tzamkiozis, Aristotle University of Thessaloniki
Nic van Vuuren, Jianrong Qin, Continental
Automotive Systems USA
Mario Disch, Nils Widdecke, Jochen
Wiedemann, IVK / FKFS Univ. of Stuttgart;
Heinrich Reister, Ernst Peter Weidmann,
Daimler AG
Advanced Ceramic Wall Flow Filter for
Reduction of Particulate Number Emission
of Direct Injection Gasoline Engines
Design Improvements of Urea SCR Mixing
for Medium-Duty Trucks
Fuel economy impact of grille opening and
engine cooling fan power on a mid-size
sedan.
(2013-01-0836)
(2013-01-1074)
(2013-01-0857)
Yoshitaka Ito, Takehide Shimoda, Takashi
Aoki, Yukinari Shibagaki, Kazuya Yuuki,
Hirofumi Sakamoto, Claus Vogt, NGK
Insulators, Ltd; Tasuku Matsumoto,
Wolfgang Heuss, Philipp Kattouah, Mikio
Makino, Kyohei Kato, NGK Europe GmbH
Guanyu Zheng, Tenneco Inc.; Manoj Kumar
Sampath, William Alcini, Gabriel Salanta,
Adam Kotrba, Tenneco Inc; Bryan Axe,
Chrysler Group LLC
Bing Xu, Michael Leffert, Brian Belanger,
63
TIME
O3-45
O3-46
D3-22
O2-38
Exhaust Emission Control: Particle Exhaust Emission Control: SCR
Filter Substrates (PFL406)
Panel Discussion: Landfill Free
Thermal Systems Modeling and
Attainment Best Practices (SDP120) Simulation (Part 1 of 2) (HX102)
Papers are presented in this session
covering both diesel and gasoline
particulate filters in terms of developing
substrates with lower pressure drop,
improved thermal stress resistance, new
substrate materials and new test methods
to evaluate the mechanical properties of the
ceramic materials.
Landfills have led to some of the most
heated, acrimonious battles over pollution
concerns in the public commons that have
ever been seen. The panel will speak about
the understanding of what is possible in the
auto industry where a fully-integrated supply
chain approach to “landfill free” attainment
can be part of a long term strategic plan.
Issues the panel will be prepared to discuss
include education as to what is possible
through direct and indirect attention (best
practices); barriers.
The Thermal Systems Modeling and
Simulation session focusses on state of the
art simulation technologies for modeling
thermal systems and their application in the
development and optimization of vehicle
thermal management and fuel economy.
The papers in the session will range from
empirical, 1D modeling methods to three
dimensional CFD models as well as coupled
methods.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
Kirby Baumgard, John Deere Power
Systems; Thorsten Boger, Corning Inc.;
Julian Tan, Watlow
Organizers:
Magdi Khair; Rahul Mital, General Motors LLC
Organizers:
John J. Bradburn, General Motors LLC; Carol
Henry, George Washington Univ.; Michael D.
Powers, Wellman Engineering Resins
Organizers:
Ales Alajbegovic, Exa Corporation; Gursaran
D. Mathur, CalsonicKansei North America
Inc.; Kumar Srinivasan, Chrysler Group LLC
10:20
a.m.
10:40
a.m.
Investigation of the Urea Evaporation and
Mixing with Various Temperatures and
Injector and Injection Angles in the Catalytic
Muffler
The Impact of Vehicle Front End Design on
AC Performance
(2013-01-1078)
(2013-01-0859)
Tae Hyun An, Man Young Kim, Chonbuk
National University; Hak Sup Jung, Kukje
Machinery; Hongsuk Kim, Gyubaek Cho,
Korea Institute of Machinery & Materials
Ken T. Lan, Chrysler Group LLC; Ling Xiao,
MEDA Limited; Kumar Srinivasan, Sadek S.
Rahman, Chrysler Group LLC
SCR System Optimization and Control
Supported by Simulation Tools
A SIMPLE MODEL FOR CALCULATION OF
VEHICLE THERMAL LOADS
(2013-01-1075)
(2013-01-0855)
Grigorios C. Koltsakis, Pavlos
Fragkiadoulakis, Zissis Samaras, Aristotle
University of Thessaloniki; Evangelos
Georgiadis, Charles Bizet, Pierre-Olivier
Calendini, Olivier Hayat, Vincent Dubois,
PSA Peugeot Citroen; Christos Manetas,
Exothermia SA
Kaushal Kumar Jha, Viren Bhanot, Venkata
Ryali, Mahindra & Mahindra
11:00
a.m.
Thermal modelling of the engine air intake
system in a full vehicle model.
(2013-01-0861)
Wilko Jansen, Jaguar & Land Rover
11:20
a.m.
Impact of the Underhood Opening Area
on the Drag Coefficient and the Thermal
Performance of a Vehicle
(2013-01-0869)
Samer Saab, Valeo Thermal Systems;
Jean-François Hetet, Alain Maiboom, Ecole
Centrale De Nantes; François Charbonnelle,
Valeo Thermal Systems
10:01
p.m.
Thermomechanical Stress Analysis of
Vehicles Gray Cast Brake (Written Only -No Oral Presentation)
(2013-01-0877)
Ali Belhocine, Mechanical Engineering;
Bouchetara Mostefa, Usto Univ.
10:02
p.m.
The Development of Exhaust Surface
Temperature Models for 3D CFD Vehicle
Thermal Management Simulations.
Part 1 - General Exhaust Configurations.
(2013-01-0879)
Kristian Haehndel, BMW Group - RMIT
University; Torsten Frank, Frieder Martin
Christel, Carsten Spengler, Gerrit Suck,
BMW Group; Sylvester Abanteriba, RMIT
University
64
Board
O2-37
Shushan Bai, Joel Maguire, and Huei Peng
The basic mechanics of automatic transmissions
remains relatively unchanged, but increased
demands for performance, fuel economy, and
drivability, as well as the higher number of gears
has made it more challenging to design the
systems that control automatic transmissions. The
emergence of new transmissions—continuously
variable and dual clutch transmissions and hybrid
powertrains—has added complexity.
Vehicle Electrification Strategies for Sustainability (SDP117)
continuously variable transmission ratio controls,
dual-clutch transmission controls, and more.
The book includes many illustrations, equations,
and clearly explained examples, as well as
sample Simulink models of various mechanical,
hydraulic, and control subsystems.
About the authors
Shushan Bai holds a PhD in electrical
engineering from Hokkaido University, Japan.
His 23 years with GM Powertrain have included
work on advanced development of automatic
transmissions. He is also an adjunct faculty
member at the University of Michigan.
In this session speakers will explore the issues and design strategies of bringing sustainable
EV, PHEV and vehicle electrification technologies to market. Identifying the customer value of
these sustainable technologies is key to their success and growth. The design models and
systems presented in this session highlight ways to optimize customer value to make these
technologies successful.
This book is unique because it ties the dynamic
analysis, control system design, and analytic
investigation of the mechanical, hydraulic, and
electronic controls. It is based on the authors’
graduate-level teaching material and provides a
useful mix of theory and application, showing
how the fundamental principles of hydraulics
and control systems are applied to today’s
automatic transmissions in cars, trucks, buses,
and commercial vehicles.
8:00 a.m. - 12:00 p.m.
The book opens with the basics of automatic
transmission mechanics and then details
dynamics and controls associated with modern
automatic transmissions. Topics covered include:
gear shifting mechanics and controls, dynamic
models of planetary automatic transmissions,
design of hydraulic control systems, algorithms
for achieving consistent shift quality, torque
converter clutch controls, centrifugal pendulum
vibration absorbers, friction launch controls, shift
scheduling and integrated powertrain controls,
Joel Maguire holds a graduate degree from
Rennsselaer Polytechnic Institute. He is global
innovation leader in GM Powertrain’s Advanced
Hybrid Group. Assignments have included
management of experimental transmission
projects in North America and Europe.
Cost Effective Annual Use and Charging Frequency for Four Different Plug-in Powertrains
Danilo Santini, Yan ZHOU, Thomas Stephens, Anant Vyas, Namdoo Kim, Kevin Gallagher,
Argonne National Laboratory
The Integrated Electric Lifestyle: The Economic and Environmental Benefits of an Efficient
Home-Vehicle System
(2013-01-0495)
Benjamin Lee, Daniel Boston, Qinpeng Wang, Godfried Augenbroe, Bert Bras, Tina Guldberg,
Christiaan Paredis, Georgia Institute of Technology; Michael Tinskey, Donna Bell, Ford Motor
Co
8:40
a.m.
A Technical and Financial Analysis of Potentially Near-Zero Greenhouse Gas Emission
Passenger Vehicles
(2013-01-0496)
Michael Brear, Peter Dennis, Chris Manzie, University of Melbourne; Rahul Sharma, University
of Queensland
9:00
a.m.
Gears grinding?
Find out why in this
new book!
Bai, Maguire,
Peng
By Shushan Bai, Joel M. Maguire
and Huei Peng
This well-illustrated book relays how the fundamental
principles of hydraulics and control systems are applied
to today’s automatic transmissions.
Like no other book of its kind, it ties together the dynamic
analysis, control system design and analytic investigation of
the mechanical, hydraulic and electronic controls.
SAE Member Price: $79.96*
List Price: $99.95
ISBN: 978-0-7680-7604-2
Product Code: R-413
*Discount based on
Elite Member level. For more
information on member levels, visit
www.sae.org/membership/benefits.
Hydrogen Sensors for Automotive Fuel Cell Applications
(2013-01-0497)
Massimo Venturi, Daimler AG; Ralph Fischer, MBtech Group GmbH & Co. KGaA; Florian
Henkel, NuCellSys GmbH
9:20
a.m.
Shushan Bai
Joel Maguire
Huei Peng
R-413
(2013-01-0494)
8:20
a.m.
of Automatic Transmissions
Huei Peng received a Ph.D. from the University
of California, Berkeley. He is a professor at the
University of Michigan and his research interests
include the design and control of hybrid vehicles
and vehicle active safety systems.
Organizers:
Rajit Johri, Ford Motor Co.; Nakia Simon, Mengyang Zhang, Chrysler Group LLC; Richard T.
Paul, Environmental Consultant
8:00
a.m.
Dynamic Analysis
and Control
System Design
P135100
Order today!
Online: books.sae.org/book-r-413
Phone: 1-877-606-7323 (U.S. & Canada)
or 1-724-776-4970 (International)
Actual shipping charges will be applied.
A Load Balancing Strategy for Increasing Battery Lifetime in Electric Vehicles
(2013-01-0499)
Christopher Masjosthusmann, Ulrich Bueker, Ulrich Köhler, Nikolaus Decius, HELLA KGaA
Hueck & Co.
9:40
a.m.
A Techno-Economic Analysis of BEV Service Providers Offering Fast Charging and Battery
Swapping Services
(2013-01-0500)
Jeremy S. Neubauer, Ahmad Pesaran, National Renewable Energy Laboratory
10:00
a.m.
Formulation of Model for Estimation of Battery Capacity Degradation based on Usage History.
(2013-01-0501)
Taisuke Tsurutani, Koichiro Takemasa, Tsubasa Uchida, Yuki Tominaga, Honda R&D Co., Ltd.
10:20
a.m.
Mark your Calendar
SAE/KSAE 2013 International Powertrains,
Fuels & Lubricants Meeting
October 21 – 23, 2013
The Future Adoption and Benefit of Electric Vehicles: A Parametric Assessment
Seoul, Korea
(2013-01-0502)
http://www.sae.org/events/pfl
Garrett E. Barter, David Reichmuth, Todd H. West, Dawn K. Manley, Sandia National
Laboratories
10:40
a.m.
Supervisory Control Strategy for Mild Hybrid System - A Model Based Approach
(2013-01-0503)
Subhabrata Gupta, Rahul Sharma, Yuaraj K B, Anil Yadav, Manik Narula, Tapan Sahoo, Maruti
Suzuki India Ltd.
11:00
a.m.
Feasibility of Electrifying Urban Goods Distribution Trucks
(2013-01-0504)
Sofia Löfstrand, Jonas Hellgren, Niklas Thulin, Volvo GTT ATR; Henrik Engdahl, Stefan
Pettersson, Viktoria Institute; Jon Williamsson, Anders Sandoff, University of Gothenburg
11:20
a.m.
Modified Bass Model with External Factors for Electric Vehicle Adoption and Policy Implications
(2013-01-0505)
Yimin Liu, Erica Klampfl, Michael A. Tamor, Ford Motor Co.
11:40
a.m.
How to Make Your Fleet More Sustainable and Save Money: The Ford Fleet Purchase Planner
(2013-01-0506)
Sandra Winkler, Daniel Reich, Erica Klampfl, Timothy Wallington, Ford Motor Co.
Planned by Sustainable Development Program Committee / Engineering Meetings Board
The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00368,
and also individually. To purchase visit collections.sae.org
65
SESSION TITLE, DESCRIPTION, AND ROOMof Automatic Transmissions
Dynamic Analysis and Control System
Design of Automatic Transmissions
TIME
Dynamic Analysis and
Control System Design
TIME
W2-66
O3-46
O3-45
O2-37
Emissions Measurement and
Testing (PFL408)
Exhaust Emission Control: SCR
Particle Emissions from
Combustion Sources (Part 1 of 2)
(PFL409)
Sustainable and Energy Efficient
Manufacturing (SDP109)
emissions measuring techniques and
testing regimes. This includes new analysis
techniques and the novel application of
existing techniques, the comparison of
existing and proposed testing regimes with
real world experience, including modeling.
Papers are invited for this session on
particle emissions from combustion
engines, including measurement and testing
methods, and the effects of changes in fuel
composition. Papers are also invited on
the topics of the environmental and health
effects of elemental carbon and organic
carbon that constitutes solid cored particles
plus the environmental and health effects of
secondary organic aerosol emissions. This
includes particulate emissions from both
gasoline and diesel engines.
The goal of this session is to address
developments in energy efficient
manufacturing relevant to the automotive
industry. Specifically, it will focus on
examining emerging energy efficient
manufacturing technologies, as well as, best
practices for established manufacturing
methods. Additionally, the session examines
innovative design and modeling techniques
relevant to energy systems employed in
automotive manufacturing.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Allen B. Duncan, Environmental Protection;
Leslie Hill, Horiba, Ltd.; Phil Price, Ford
Motor Co.
Organizers:
Magdi Khair; Rahul Mital, General Motors
LLC
Organizers:
Imad A. Khalek, Southwest Research
Institute; Matti Maricq, Ford Motor Co.
Organizers:
Virginia Univ.; Michael Santella, University
of Tennessee; Antoinette W. Stein, EPPLCA.org
Chairpersons:
Matti Maricq, Ford Motor Co; Imad Khalek,
Chairpersons:
Univ; Bhaskaran Gopalakrishnan, West
Virginia Univ
Moderators:
Virginia Univ
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
Vehicle Exhaust Emissions Characterization
by Chromatographic Techniques Applied to
Different Gasoline-Ethanol Blend
Upcoming Emission Regulations for
Passenger Cars : Impact on SCR System
Requirements and Developments
Analysis of Gaseous and PM Emissions of
4-Stroke CAI/HCCI and SI Combustion in a
DI Gasoline Engine
Technical Keynote: An Overview of
Sustainable Practices at US Manufacturing
Industry
(2013-01-1044)
(2013-01-1072)
(2013-01-1549)
(Oral Only)
Susanna Paz-Estivill, Rosa Delgado-Ortiz,
Applus IDIADA; Elisenda Cirera-Domènech,
Francesc Broto-Puig, IQS (Ramon Llull
University)
Joël Op de Beeck, Inergy Automotive
Systems SA; James Thompson, Neall
Booth, Inergy Automotive Systems LLC
Mohammed Moore Ojapah, Yan Zhang,
Hua Zhao, Brunel University
Nasr Alkadi, Oak Ridge National Laboratory
Alternative to Hydrogen/Helium as Flame
Ionization Detector Fuel
Cold Start Effect Phenomena over
Zeolite SCR Catalysts for Exhaust Gas
Aftertreatment
Simulation and Analysis of In-Cylinder
Soot Formation in a Low Temperature
Combustion Diesel Engine Using a Detailed
Reaction Mechanism
(2013-01-1045)
(2013-01-1064)
(2013-01-1565)
Mahmoud K. Yassine, Morgan La Pan,
Kamal Nayfeh, Chrysler Group LLC
Volker Schmeisser, Michel Weibel, Laura
Sebastian Hernando, Daimler AG; Isabella
Nova, Enrico Tronconi, Maria Pia Ruggeri,
Politecnico di Milano
Chitralkumar V. Naik, Karthik Puduppakkam,
Ellen Meeks, Reaction Design Inc.
Experimental and Modeling Study of a
Diesel Oxidation Catalyst (DOC) under
Transient and CPF Active Regeneration
Conditions
Mitigation of Platinum Poisoning of CuZeolite SCR Catalysts
The Influence of Fuel Properties on
Particulate Number Emissions from a Direct
Injection Spark Ignition Engine
A Study on Innovation of Material Recycles:
World’s First Implementation to Use ELV
Bumper Materials for New Car Bumpers
(2013-01-1046)
(2013-01-1065)
(2013-01-1558)
(2013-01-0831)
Xiaobo Song, Harsha Surenahalli, Jeffrey
Naber, Gordon Parker, John Johnson,
Michigan Technological University
Xu Chen, Neal Currier, Aleksey Yezerets,
Krishna Kamasamudram, Cummins Inc.
Felix Leach, Richard Stone, Univ. of Oxford;
Dave Richardson, Jaguar Cars Ltd
Shigeki Nitta, Kanako Ito, Mazda Motor
Corporation
Emissions Measurement System for Hybrid
and Plug-in Hybrid Electric Vehicles Using
Intermittent Sampling Strategy
On-Engine Investigation of SCR on Filters
(SCRoF) for HDD Passive Applications
A New Approach for Very Low Particulate
Mass Emissions Measurement
The Impact of Die Start-Up Procedure for
High Pressure Die Casting
(2013-01-1047)
(2013-01-1066)
(2013-01-1557)
(2013-01-0829)
Yoshinori Otsuki, Tatsuki Kumagai, Hiroshi
Nakamura, Katsushi Taguchi, Horiba Ltd;
Nobuhisa Mori, Toyota Motor Corporation
Weiyong Tang, Dave Youngren, Michael
SantaMaria, Sanath Kumar, BASF
Corporation
Jonathan Bushkuhl, Kettering University;
William Silvis, AVL North America Inc;
Joseph Szente, Matti Maricq, Ford Motor
Co
Alastair Long, David Thornhill, Cecil
Armstrong, Queen’s University of Belfast;
David Watson, Ryobi Aluminium Castings
(UK) Ltd
Influence of Driving Cycles on Powered
Two-Wheelers Emissions, Fuel
Consumption and Cold Start Behavior
The Effects of CO, H2, and C3H6 on the SCR
Reactions of an Fe Zeolite SCR Catalyst
Application of the Pegasor Particle Sensor
for the Measurement of Mass and Particle
Number Emissions
Trends and Tips for Driving Low VOC
Emissions for Cabin Interiors
(2013-01-1048)
(2013-01-1062)
(2013-01-1561)
(Oral Only)
Giorgio Zamboni, Univ of Genoa; Maria
Vittoria Prati, Istituto Motori CNR; Chiara
Carraro, Stefano Malfettani, Univ of Genoa;
Maria Antonietta Costagliola, Giovanni
Meccariello, Istituto Motori CNR; Silvia
Marelli, Massimo Capobianco, Univ of
Genoa
Michael Andrew Smith, University of
Michigan; Christopher Depcik, University of
Kansas; John Hoard, Stani Bohac, Dennis
Assanis, University of Michigan
Leonidas Ntziachristos, Stavros Amanatidis,
Zissis Samaras, Aristotle University of
Thessaloniki; Kauko Janka, Juha Tikkanen,
Pegasor Oy
Marilyn Black, UL AQS
66
TIME
W2-66
O3-46
O3-45
O2-37
Emissions Measurement and
Testing (PFL408)
Exhaust Emission Control: SCR
(PFL409)
Sustainable and Energy Efficient
Manufacturing (SDP109)
emissions measuring techniques and
testing regimes. This includes new analysis
techniques and the novel application of
existing techniques, the comparison of
existing and proposed testing regimes with
real world experience, including modeling.
The goal of this session is to address
developments in energy efficient
manufacturing relevant to the automotive
industry. Specifically, it will focus on
examining emerging energy efficient
manufacturing technologies, as well as, best
practices for established manufacturing
methods. Additionally, the session examines
innovative design and modeling techniques
relevant to energy systems employed in
automotive manufacturing.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Allen B. Duncan, Environmental Protection;
Leslie Hill, Horiba, Ltd.; Phil Price, Ford
Motor Co.
Organizers:
Magdi Khair; Rahul Mital, General Motors
LLC
Organizers:
Organizers:
Virginia Univ.; Michael Santella, University
of Tennessee; Antoinette W. Stein, EPPLCA.org
Chairpersons:
Chairpersons:
Virginia Univ
Moderators:
Virginia Univ
2:40
p.m.
3:00
p.m.
3:20
p.m.
3:40
p.m.
10:01
p.m.
Fast O2 Measurement using Modified UEGO
Sensors in the Intake and Exhaust of a
Diesel Engine
Comparison of SCR Catalyst Performance
on RMC SET Emission Cycle between an
Engine and a High Flow Burner Rig
Determining Soot Distribution in the Vehicle
Exhaust Downstream of a Faulty Diesel
Particulate Filter
High-Throughput Manufacturing for Chrome
Thin Film Coatings on Aluminum Wheels
(2013-01-1051)
(2013-01-1070)
(2013-01-1562)
(Oral Only)
Kieran Hegarty, Paul Dickinson, Dariusz
Cieslar, Nick Collings, Univ of Cambridge
Pranay Nagar, Tamas Szailer, Cummins
Inc.; Cynthia Webb, Southwest Research
Institute
Paul Tennison, Joseph Szente, Michael
Loos, Thomas Korniski, Xiaogang Zhang,
Ford Motor Co.
David Mount, ULVAC Japan, Ltd.
An Experimental and Modeling Study of
Reaction Kinetics for a Cu-Zeolite SCR
Catalyst Based on Engine Experiments
Improvement of Low-Temperature
Performance of The NOx Reduction
Efficiency on the Urea-SCR Catalysts
Effect of Equivalence Ratio on the
Particulate Emissions from a Spark-Ignited,
Direct-Injected Gasoline
Chilled Water System Analysis Tool
(CWSAT) and Application to Manufacturing
Plants
(2013-01-1054)
(2013-01-1076)
(2013-01-1560)
(2013-01-0832)
Xiaobo Song, Jeffrey Naber, John Johnson,
Gordon Parker, MIchigan Technological
University
Satoshi Sato, Shinya Sato, Mitsuru Hosoya,
Hino Motors, Ltd.
Stephen Sakai, Mitchell Hageman, David
Rothamer, University of Wisconsin-Madison
Alex R. Quintal; Ghanshym Gaudani,
Dragoljub Kosanovic, UMASS Amherst IAC
Effects of 7, 9, and 10 psi Vapor Pressure
Fuels on Multi-Day Diurnal Evaporative
Emissions of Tier 2 and LEV II Vehicles
Experimental Demonstration of a ModelBased Control Design and Calibration
Method for Cost Optimal Euro-VI EngineAftertreatment Operation
PN Emissions from Heavy-Duty Diesel
Engine with Periodic Regenerating DPF
Compressed Air Efficiency: A Case Study
Combining Variable Speed Control with
Electronic Inlet Valve Modulation
(2013-01-1057)
(2013-01-1061)
(2013-01-1564)
(2013-01-0834)
Johanna Dolch, Ford Motor Co; Aaron
Reek, Gerard Glinsky, SGS Environmental
Testing Corp; Dominic Dicicco, Ford Motor
Co; Valerie Ughetta, Alliance of Automobile
Manufacturers Inc
Paul Mentink, Frank Willems, Frank Kupper,
Edwin Van den Eijnden, TNO Automotive
Hiroyuki Yamada, NTSEL
Jason Cambridge, Shane Frazier, David W.
Goodman, Malek Nofal, Ali Razban, IUPUI
In-Situ Real-Time Fuel Consumption
Measurement Using Raw Exhaust Flow
Meter and Zirconia AFR Sensor
Using IAC Database for Longitudinal Study
of Small to Medium Sized Automotive
Industry Suppliers’ Energy Intensity
Changes
(2013-01-1058)
(2013-01-0833)
Masanobu Akita, Hiroshi Nakamura,
Masayuki Adachi, Horiba, Ltd.
S. Chaudhari; Deepak Gupta, Southeast
Missouri State Univ.; Bhaskaran
Gopalakrishnan, West Virginia Univ.
Ford Otosan New Powertrain Test Facility
- Part 1: Design & Construction of
Engine Emission Development Cells (Written
Increasing Competitiveness and
Sustainability in Structural Assembly by
Using Friction Spot Welding (Written Only
(2013-01-1059)
(2013-01-0835)
Serdar Akca, Cem Ozen, Fatih Yilmaz, Yasin
Yayla, Ford Otosan Product Development
Henry Hameister, Helmut Schmidt University
Board
67
TIME
O2-38
Thermal Systems Modeling and Simulation (Part 2 of 2) (HX102)
The Thermal Systems Modeling and Simulation session focusses on state of the art
simulation technologies for modeling thermal systems and their application in the
development and optimization of vehicle thermal management and fuel economy.
The papers in the session will range from empirical, 1D modeling methods to three
dimensional CFD models as well as coupled methods.
1:00 p.m. - 4:00 p.m.
Organizers:
Ales Alajbegovic, Exa Corporation; Gursaran D. Mathur, CalsonicKansei North
America Inc.; Kumar Srinivasan, Chrysler Group LLC
1:00
p.m.
Design of efficient air-conditioning systems for electric vehicles
Figure out why
and how engines
fail with this
new book!
NEW!
(2013-01-0864)
Bárbara Torregrosa-Jaime, Jorge Payá, Jose Corberan, Universitat Politècnica de
València
1:20
p.m.
A Comparison of Physiology-based Metrics to Environment-based Metrics for
Evaluating Thermal Comfort
(2013-01-0844)
Mark Hepokoski, Allen Curran, Tony Schwenn, ThermoAnalytics Inc
1:40
p.m.
A New Computational Tool for Automotive Thermal Comfort Simulation
(2013-01-0868)
Jiazhen Ling, Vikrant Aute, Yunho Hwang, Reinhard Radermacher, University of
Maryland
2:00
p.m.
A New Automotive Air Conditioning System Simulation Tool Developed in Matlab/
Simulink
(2013-01-0850)
Tibor Kiss, Lawrence Chaney, National Renewable Energy Laboratory; John Meyer,
Visteon Corporation
2:20
p.m.
PSO tuned Vehicle Climate System Model for HIL based ECU testing
(2013-01-0874)
Sufian Ashraf Mazhari, Saju Nampoothiri, Tata Elxsi, Ltd.
2:40
p.m.
Numerical Simulation of Warm-up Characteristics and Thermal Management of a
GDI Engine
(2013-01-0870)
Jesús Lahuerta, Stephen Samuel, Oxford Brookes University
3:00
p.m.
A Statistical Approach for Correlation/Validation of Hot-Soak Terminal Temperature of
a Vehicle Cabin CFD Model
(2013-01-0854)
Tao Ye, General Motors Company
3:20
p.m.
Active Thermal Management with a Dual Mode Coolant Pump
(2013-01-0849)
Varun Negandhi, BorgWarner Inc.; Dohoy Jung, University of Michigan-Dearborn;
John Shutty, BorgWarner Inc.
3:40
p.m.
A Multi-Dimensional CFD-Chemical Kinetics Approach in Detection and Reduction
of Knocking Combustion in Diesel-Natural Gas Dual-Fuel Engines Using Local Heat
Release Analysis
(2013-01-0865)
Amin Maghbouli, National University of Singapore; Sina Shafee, Middle East
Technical University; Rahim Khoshbakhti Saray, Sahand University of Technology;
Wenming Yang, National University of Singapore; Vahid Hosseini, Sharif Univ of
Technology; Hui An, National University of Singapore
4:00
p.m.
Improving Air-Fuel Mixing in Diesel Engine Fuelled by Higher Viscous Fuel using
Guide Vane Swirl and Tumble Device (GVSTD)
By Ernst Greuter and
Stefan Zima
Translated from a popular
German reference work,
this English edition sheds
light on determining
engine failure and
remedies. The authors
present a selection
of engine failures,
investigate and evaluate ISBN: 978-0-7680-0885-2
List Price $109.95
why they failed, and
provide guidance on how Product Code: R-320
to prevent such failures.
The scope of engines covered includes generalpurpose engines found in an array of industries.
This book serves as a welcomed educational
reference for researchers, students and engineers
to discover how the theoretically impossible canand will-happen.
This book is ideal for those working with engines,
including:
• Repair Shops
• Shipyards
• Insurance Companies
• Researchers
• And Engine
Manufacturers
(2013-01-0867)
Idris Saad, Universiti Teknologi MARA; Saiful Bari, University of South Australia
10:01
p.m.
Organic Rankine Cycles with Dry Fluids for Small Engine Exhaust Waste Heat
Recovery
(2013-01-0878)
Charles Sprouse III, Christopher Depcik, University of Kansas
10:02
p.m.
Prediction of HVAC System Aero/acoustic Noise Generation and Propagation using
CFD (Written Only -- No Oral Presentation)
Order today!
(2013-01-0856)
Phone: 1-877-606-7323
(U.S. & Canada)
or 1-724-776-4970
Mayur Sah, Kumar Srinivasan, Chrysler Group LLC; Fred Mendonca, Nachiket Pai,
CD Adapco
Planned by Thermal Management Activity / EMB Land and Sea Group
The papers in this session are available in SAE Technical Paper Collection, COLLTP-00331, and also individually. To purchase visit collections.sae.org
68
P121396
TIME
O2-43
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
O2-37
D0-03A
O2-35/36
Advanced Catalysts and
Substrates (PFL400)
Climate Control (Part 1 of 2)
(HX104)
(PFL409)
the systems engineering experience
required to achieve ultra-low emission levels
on light-duty vehicles. Emission system
component topics for this session include
the development of advanced threeway catalysts, the development of NOX
control strategies for gasoline lean burn
engines, the application of high cell density
substrates to advanced emission systems,
and the integration of these components
into full vehicle emission systems.
Climate control is a defining vehicle
attribute and is associated with brand
image. Thermal performance and quality
of climate control are both critical to
customer satisfaction. The system has
strong design interaction with other vehicle
systems, while its primary objective is to
deliver thermal comfort and occupant safety
with low energy consumption. Energy
Efficient rear defog, C02 modeling, Suction
Pressure drop, IHX optimization, and
innovative airflow control are amoung recent
advances.
This session reviews life cycle assessments
on materials, technologies, and processes.
Other topics included in this session are
updates on the development of life cycle
analysis databases for use by the national
and international community.
8:00 a.m. - 9:20 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Douglas Ball, Umicore Autocat USA Inc.;
Rasto Brezny, Manufacturers of Emission
Controls Assoc.; Ronald Heck; Joseph E.
Kubsh, Manufacturers of Emission Controls
Assoc.
Organizers:
Bashar AbdulNour, General Dynamics Land
Systems; Jeffrey Bozeman, General Motors
LLC; William Raymond Hill, Macrae LLC
Organizers:
Organizers:
Emission Performance of California and
Federal Aftermarket TWC Converters
Keynote Presentation
Cathode Material Identity’s Influence on
the Environmental Impact of Automotive
Lithium-Ion Batteries
Experimental Study the Influence of EP
Antiwear Additive on Particle Emissions in
Diesel Engines
(2013-01-1298)
(Oral Only)
(Oral Only)
(2013-01-1566)
Rasto Brezny, Joseph Kubsh,
Manufacturers of Emission Controls Assoc
Systems
Jennifer B. Dunn, Argonne National
Laboratory; Christine James, University of
Michigan; Kevin Gallagher, Linda Gaines,
John Sullivan, Andrew Burnham, Michael
Wang, Argonne National Laboratory
Xingyu Liang, Yuesen Wang, Ge-Qun Shu,
lihui dong, Kang Yang, Yu Chen, State Key
Lab Of Engines
N2O Emissions of Low Emission Vehicles
Modeling CO2 Concentrations in Vehicle
Cabin
Contemporary Tools and Approach for
Project Management Sustainability in Indian
Automotive Industry
Strategies for Particle Emissions Reduction
from GDI Engines
(2013-01-1300)
(2013-01-1497)
(2013-01-1278)
(2013-01-1556)
Douglas Ball, David Moser, Yonghong Yang,
David Lewis, Umicore Autocat USA Inc.
Heejung Jung, Univ. of California-Riverside
Yaamini Devi Loganathan, Foton Motors
Mktg & Sales India Pvt Ltd
Youngjae Kim, Yongha Kim, SangYoul
Jun, Kang Hun Lee, SeungHyun Rew,
Donghyeon Lee, Hyundai Autron; Simsoo
Park, Korea University
Hydrocarbon Traps for Gasoline and
Ethanol Applications
Studies on AC Suction Line Pressure Drop
Using 1D Modeling
Indian Automobile Greenfield Projects and
its Impact on Economic Sustainability
Fuel Effect on Particle Emissions of a Direct
Injection Engine
(2013-01-1297)
(2013-01-1503)
(2013-01-1284)
(2013-01-1559)
John Nunan, Umicore Autocat USA Inc;
Jason Lupescu, Ford Motor Co; Gregory
Denison, Douglas Ball, David Moser,
Umicore Autocat USA Inc
Sathish Kumar S, Chrysler India Automotive
Pvt. Ltd.; Shankar Natarajan, Chrysler
Canada Inc.; Michael V Rinaldi, Chrysler
Group LLC
Yaamini Devi Loganathan, Foton Motors
Mktg & Sales India Pvt Ltd
Yongha Kim, Youngjae Kim, Jiwon
Kang, SangYoul Jun, SeungHyun Rew,
Donghyeon Lee, Hyundai Autron; Simsoo
Park, Korea University
Exhaust Gas Aftertreatment for
Lean Gasoline Direct Injection Engines Potential for Future Applications
1D Modeling of AC Refrigerant Loop and
Vehicle Cabin to Simulate Soak and Cool
Down
Uncertainties in the Life Cycle Assessment
of Passenger Vehicles
Differences in O2 and NO2 Oxidation of
Diesel Particulate
(2013-01-1299)
(2013-01-1502)
(2013-01-1279)
(Oral Only)
Susanne Philipp, Ruediger Hoyer, Frank
Adam, Stephan Eckhoff, Umicore AG &
Co. KG, Hanau, Germany; Rolf Wunsch,
Christof Schoen, Guido Vent, Daimler AG,
Sindelfingen, Germany
Shankar Natarajan, Chrysler Canada Inc.;
Sathish Kumar S, Chrysler India Automotive
Pvt. Ltd.; Ricardo Amaral, Sadek Rahman,
Chrysler Group LLC
Adriana Carvallo, Jean-Pierre L. Birat,
Antoine Gauriat, Jean-Sébastien Thomas,
ArcelorMittal Global R&D
Andrea Strzelec, Texas A&M Univ.; Todd
Toops, C. Stuart Daw, Oak Ridge National
Laboratory
Comprehensive Modeling of Vehicle Air
Conditioning Loads Using Heat Balance
Method
Regional Impact on the Life Cycle
Assessment of Electric Vehicle (EV)
Evaluation of Partial Flow Dilution
Methodology for Light Duty Particulate
Mass Measurement
(2013-01-1507)
(2013-01-1280)
(2013-01-1567)
Mohammad Ali Fayazbakhsh, Majid
Bahrami, Simon Fraser University
Fan Yang, Bingbing Li, Chris Yuan,
University of Wisconsin Milwaukee
Eric B. Foote, Matti Maricq, Michael
Sherman, Daniel Carpenter, Mark Guenther,
Jason Peabody, Mark Polster, Joseph
Szente, Michael Loos, Ford Motor Co.
Internal Heat Exchanger Integration for a
Dual Evaporator MAC System
Life Cycle Assessment of Energy Use and
GHG Emissions of Plug-In Hybrid Electric
Vehicles in China
Use of a Catalytic Stripper as an Alternative
to the Original PMP Measurement Protocol
(2013-01-1504)
(2013-01-1281)
(2013-01-1563)
Lothar Seybold, GM Europe - Adam Opel
AG Engineering; William Hill, Macrae LLC;
Ioannis Lazaridis, GM Europe - Adam Opel
AG Engineering
Xiaomin Xie, Tingting Zhang, Zhen Huang,
Shanghai Jiao Tong Univ.
Leonidas Ntziachristos, Stavros Amanatidis,
Zissis Samaras, Aristotle University
of Thessaloniki; Barouch Giechaskiel,
Alexander Bergmann, AVL LIST GmbH
Chairpersons:
69
TIME
O2-43
O2-37
O2-35/36
Advanced Catalysts and
Substrates (PFL400)
(HX104)
(PFL409)
the systems engineering experience
required to achieve ultra-low emission levels
on light-duty vehicles. Emission system
component topics for this session include
the development of advanced threeway catalysts, the development of NOX
control strategies for gasoline lean burn
engines, the application of high cell density
substrates to advanced emission systems,
and the integration of these components
into full vehicle emission systems.
attribute and is associated with brand
image. Thermal performance and quality
of climate control are both critical to
customer satisfaction. The system has
strong design interaction with other vehicle
systems, while its primary objective is to
deliver thermal comfort and occupant safety
with low energy consumption. Energy
Efficient rear defog, C02 modeling, Suction
Pressure drop, IHX optimization, and
innovative airflow control are amoung recent
advances.
This session reviews life cycle assessments
on materials, technologies, and processes.
Other topics included in this session are
updates on the development of life cycle
analysis databases for use by the national
and international community.
8:00 a.m. - 9:20 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Douglas Ball, Umicore Autocat USA Inc.;
Rasto Brezny, Manufacturers of Emission
Controls Assoc.; Ronald Heck; Joseph E.
Kubsh, Manufacturers of Emission Controls
Assoc.
Organizers:
Organizers:
Organizers:
Vehicle Cabin Air Quality with Fractional Air
Recirculation
Reducing Light Duty Vehicle Fuel
Consumption and Greenhouse Gas
Emissions: The Combined Potential
of Hybrid Technology and Behavioral
Adaptation
Impact of Biomass-Derived Fuels on Soot
Oxidation and DPF Regeneration Behavior
(2013-01-1494)
(2013-01-1282)
(2013-01-1551)
Michael L. Grady, Heejung Jung, Univ of
California-Riverside; Yong chul Kim, June
Kyu Park, Bock Cheol Lee, Hyundai Motor
Company
Danilo Santini, Andrew Burnham, Argonne
National Laboratory
Om Parkash Bhardwaj, Florian Kremer,
Stefan Pischinger, VKA, RWTH Aachen
University; Bernhard Lüers, Andreas F.
Kolbeck, Thomas Koerfer, FEV GmbH
Effects on Real Life Fuel Efficiency of
Raising the MAC Engagement Temperature
Life-Cycle Greenhouse Gas and Criteria Air
Pollutant Emissions of Electric Vehicles in
the United States
Effect of Multiple Injections on Particulate
Size-Number Distributions in a Common
Rail Direct Injection Engine Fueled with
Karanja Biodiesel Blends
(2013-01-1506)
(2013-01-1283)
(2013-01-1554)
Roberto Monforte, Massimiliano Mandrile,
Fiat Group Automobiles S.p.A.
Hao Cai, Michael Wang, Amgad Elgowainy,
Jeongwoo Han, Argonne National
Laboratory
Atul Dhar; Avinash Kumar Agarwal, I I T
Kanpur
Smart Rear Defog
Application of Life Cycle Analysis to End of
Life Vehicles Recycling Process
(2013-01-1510)
(2013-01-1285)
Gilles Delorme, General Motors of Canada
Suna Erses Yay, Sakarya Universitesi;
Kubilay Yay, Istanbul Technical Univ.
10:00
a.m.
10:20
a.m.
10:40
a.m.
10:01
p.m.
Mark your Calendar
SAE 2013 Thermal Management Systems Symposium
October 22 – 24, 2013
Detroit, Michigan, USA
http://www.sae.org/events/tmss/
70
D0-03A
Chairpersons:
Macroscopic Study of Projected Catalytic
Converter Requirements (Written Only -- No
Oral Presentation)
A Miniature Catalytic Stripper for Particles
Less Than 23 Nanometers (Written Only -No Oral Presentation)
(2013-01-1286)
(2013-01-1570)
Bryan Strecker, Christopher Depcik, Univ.
of Kansas
Jacob Swanson, University of Cambridge;
David Kittelson, Univ of Minnesota-Twin
Cities; Barouch Giechaskiel, Alexander
Bergmann, AVL LIST GmbH; Martyn Twigg,
TST Ltd
Board
TIME
O3-46
8:20
a.m.
O2-38
O2-43
Modeling (Part 1 of 2) (PFL407)
Thermal Systems Components
(HX101)
Gaseous Engine Emissions
(PFL411)
diesel engine exhaust aftertreatment system
models as well as their validation and
application. Technologies covered include
DOC, HC Trap, DPF, LNT, SCR, ammonia
oxidation catalysts, hybrid or combined
catalysts, urea-water solution spray dynamics,
and mixture non-uniformity. Modeling
aspects range from fundamental, 3D models
of individual components to system level
simulation, optimization, and control.
This session features components used for
thermal management. The papers address
design, application and systems related
topics.
Papers for this session on the general topic
of combustion engine gaseous emissions
(regulated and non-regulated). This includes
hydrocarbon species production over
aftertreatment devices as a result of changes
in fuel specification and the inclusion of bio
derived components, specific NOX species
production over catalytic devices, well
to wheels CO2 production for alternative
technologies and consideration of secondary
emissions production (slip) as a result of
aftertreatment.
8:20 a.m. - 11:20 a.m.
9:00 a.m. - 12:00 p.m.
9:40 a.m. - 11:00 a.m.
Organizers:
Maruthi Devarakonda, GE Electric
Company; Thomas McKinley, Cummins
Inc.; Vincenzo Mulone, University of Rome
Tor Vergata; Achuth Munnannur, Cummins;
Balaji Sukumar, Johnson Matthey ECT
Organizers:
Ronald Semel, General Motors; Alaa ElSharkawy, Chrysler Group LLC
Organizers:
Siddiq Khan, ACEEE; Amanda LeaLangton, University of Leeds; Siddiq Khan,
ACEEE
Development of a 3-D Model for Analyzing
the Effects of Channel Geometry on
Filtration Characteristics in Particulate Filter
System
(2013-01-1583)
Hoon Lee, Kyeong O. Lee, Argonne
National Laboratory
8:40
a.m.
The Sensitivity of DPF Performance to the
Spatial Distribution of Ash Inside DPF Inlet
Channels
(2013-01-1584)
Yujun Wang, Victor Wong, Alexander
Sappok, Sean Munnis, Massachusetts
9:00
a.m.
9:20
a.m.
Development of a 1-D Catalyzed Diesel
Particulate Filter Model for Simulation of
the Oxidation of Particulate Matter and
Gaseous Species During Passive Oxidation
and Active Regeneration
(2013-01-1574)
(Oral Only)
Kiran C. Premchand, John Johnson, SongLin Yang, Michigan Technological Univ.
Alfred A. Gunther, Global Engine Cooling
Solutions Llc
A Thermally Efficient DOC Configuration to
Improve CO and THC Conversion Efficiency
Development of High Efficient Radiator
Cooling Fan for Automotive Applications
(2013-01-1582)
(2013-01-1293)
Isaline Lefort, Athanasios Tsolakis, University Hidetake Ota, Katayama Yuichi, Osawa
of Birmingham
Yukio, Mitsuba corp; Yokoyama Hiroshi,
Mitsuba Corp
9:40
a.m.
10:00
a.m.
10:20
a.m.
DOC Temperature Control for Low
Temperature Operating Ranges with Post
and Main Injection Actuation
Microstructural Analysis of Deposits on
Heavy-Duty EGR Coolers
Chassis Dynamometer Testing of Ammonia
Emissions from Light-Duty SI Vehicles in the
Context of Emissions of Reactive Nitrogen
Compounds
(2013-01-1580)
(2013-01-1288)
(2013-01-1346)
Stephan Stadlbauer; Harald Waschl;
Alexander Schilling; Luigi del Re
Michael J. Lance, John Storey, C. Scott
Sluder, Harry Meyer III, Oak Ridge National
Laboratory; Brad Watkins, Michele Kaiser,
Ponnaiyan Ayyappan, John Deere Power
Systems
Joseph Woodburn, Piotr Bielaczyc, Andrzej
Szczotka, Bosmal Automotive R&D Institute
Ltd
BREAK
Removal of EGR Cooler Deposits Through
Flow-Induced Shear
Joint Research on Unregulated Emissions
from an Alcohols-gasoline Blend Vehicle
Using FTIR, HPLC and GC-MS Measuring
Methods
(2013-01-1292)
(2013-01-1345)
C. Scott Sluder, John Storey, Michael J.
Lance, Teresa Barone, Oak Ridge National
Laboratory
Fan Zhang, Jian-hai Wang, Dong-lian Tian,
China Automotive Tech. & Research Center;
Jian-Xin Wang, Shi-Jin Shuai, Tsinghua Univ
Three Way Catalyst Modeling with Ammonia
and Nitrous Oxide Kinetics for a Lean
Burn Spark Ignition Direct Injection (SIDI)
Gasoline Engine
Optical and Infrared In-Situ Measurements
of EGR Cooler Fouling
Effect of Hot Exhaust Gas Recirculation
on the Combustion Characteristics and
Particulate Emissions of a Low Pilot-Ignited
Natural Gas Engine
(2013-01-1572)
(2013-01-1289)
(2013-01-1341)
Jian Gong, Christopher Rutland, University
of Wisconsin-Madison
Ashwin A. Salvi, John Hoard, Pavan Karthik
Jagarlapudi, Theera Pornphaithoonsakun,
Kevin Collao, Univ. of Michigan-Ann Arbor;
Dennis N. Assanis, Stony Brook Univ.;
Daniel J. Styles, Mehdi Abarham, Eric W.
Curtis, Ford Motor Co.
Lei Zhou, Yifu Liu, Lu Sun, Haixiao Hou,
Ke Zeng, Zuohua Huang, Xi’an Jiaotong
University
71
TIME
O3-46
10:40
a.m.
11:00
a.m.
O2-38
O2-43
Thermal Systems Components
(HX101)
Gaseous Engine Emissions
(PFL411)
diesel engine exhaust aftertreatment system
models as well as their validation and
application. Technologies covered include
DOC, HC Trap, DPF, LNT, SCR, ammonia
oxidation catalysts, hybrid or combined
catalysts, urea-water solution spray dynamics,
and mixture non-uniformity. Modeling
aspects range from fundamental, 3D models
of individual components to system level
simulation, optimization, and control.
This session features components used for
thermal management. The papers address
design, application and systems related
topics.
Papers for this session on the general topic
of combustion engine gaseous emissions
(regulated and non-regulated). This includes
hydrocarbon species production over
aftertreatment devices as a result of changes
in fuel specification and the inclusion of bio
derived components, specific NOX species
production over catalytic devices, well
to wheels CO2 production for alternative
technologies and consideration of secondary
emissions production (slip) as a result of
aftertreatment.
8:20 a.m. - 11:20 a.m.
9:00 a.m. - 12:00 p.m.
9:40 a.m. - 11:00 a.m.
Organizers:
Organizers:
Ronald Semel, General Motors; Alaa ElSharkawy, Chrysler Group LLC
Organizers:
Siddiq Khan, ACEEE; Amanda LeaLangton, University of Leeds; Siddiq Khan,
ACEEE
Comparative Urban Drive Cycle Simulations
of Light-Duty Hybrid Vehicles with Gasoline
or Diesel Engines and Emissions Controls
Thermal Analysis of Rotating Components
in the Presence of a Radiation Heat Source
The Influence of Rolling Resistance on Fuel
Consumption in Heavy-Duty Vehicles
(2013-01-1585)
(Oral Only)
(2013-01-1343)
Zhiming Gao, C. Stuart Daw, David E.
Smith, Oak Ridge National Laboratory
Mohannad Al-Hakeem, Alaa El-Sharkawy,
Chrysler Group LLC
Marco Mammetti, David Gallegos, Alex
Freixas, Jordi Muñoz, Applus Idiada
Numerical and Experimental Investigation of
Catalyst Flow and Air/Fuel Control
Cold Storage Air Conditioning System for
Idle Stop Vehicle
(2013-01-1577)
(2013-01-1287)
Scott Morton, Ronald Hall, Paul Radavich,
Mercury Marine
Atsushi Yamada, Shin Nishida, Naoki
Yokoyama, Jyun Abei, Takashi Danjo, Lisa
Florida, Bradley Brodie, Yohei Nagano,
DENSO Corporation
11:20
a.m.
Vehicle AC System Durability and
Compressor Warranty Concern Chance
(2013-01-1291)
Yinhua Zheng, Visteon Corp.
11:40
a.m.
A Systematic Approach of Cooling System
Design, Development and Application for
Commercial Vehicles
(2013-01-1294)
Kiran N, B Balaji, Ashok Leyland Ltd
10:01
p.m.
10:02
p.m.
SAE 2012 - High Efficiency Subcool
Condenser (Written Only -- No Oral
Presentation)
Recommendations for the Next Generation
of Hydrocarbon Modeling with respect to
Diesel Exhaust Aftertreatment and Biodiesel
Fuels
(2013-01-1295)
(2013-01-1348)
Markus Wawzyniak, Christoph Walter,
Andreas Kemle, Guillaume David, Behr
GmbH & Co. KG
Jonathan M. S. Mattson, Ryan O’Malley,
Christopher Depcik, Edward Peltier,
University of Kansas
Air Flow Control Servomechanism for
Cooling Of the Radiator of a Car Engine
(2013-01-1296)
Spiridon-Cristian-Da Dascalescu, Technical
University “Gh.Asachi” Iasi; Marius
Receanu, TAR MV ltd Iasi
72
TIME
D0-03A
W2-60
O2-37
(HX104)
Modeling (Part 2) (PFL407)
attribute and is strongly associated with
brand image. Performance and quality
of the climate control system are critical
to customer satisfaction. The system
has strong interaction with other vehicle
systems. Its primary objective is to
deliver thermal comfort and safety of the
occupants. Energy Efficiency including
lubrication variaion, refrigerant distribution
and improved simulation are among the
recent advances.
diesel engine exhaust aftertreatment
system models as well as their validation
and application. Technologies covered
include DOC, HC Trap, DPF, LNT, SCR,
ammonia oxidation catalysts, hybrid or
combined catalysts, urea-water solution
spray dynamics, and mixture non-uniformity.
Modeling aspects range from fundamental,
3D models of individual components to
system level simulation, optimization, and
control.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
Moderators:
Organizers:
Organizers:
Review of Technologies for Sustainable
Ground Transportation
Enhancement of Flow Distribution and
Pressure Drop Performance of SCR System
for Commercial Vehicles
(2013-01-1039)
(Oral Only)
(2013-01-1586)
Ramesh K. Agarwal, Washington Univ. St.
Louis
Jeffrey Bozeman, General Motors
Peter Tai, Yan Shu, Martin Romzek,
Eberspaecher North America Inc
Emission Performance of Neat and Blended
Polyoxymethylene Dimethyl Ethers in an Old
Light-Duty Diesel Car
Experimental and Analytical Investigation of
Two-Phase Ejector Air-Conditioning Cycles
Using Low-Pressure Refrigerants R134a
and R1234yf
Validation of Turbulence Models for an
Automotive SCR System with Laser Doppler
Anemometry Measurements
(2013-01-1035)
(2013-01-1495)
(2013-01-1579)
Leonardo Pellegrini, Mario Marchionna,
Renata Patrini, Salvatore Florio, ENI SpA
Neal Lawrence, Stefan Elbel, University of
Illinois Urbana-Champaign
Markus Zöchbauer, Simon Fischer, Thomas
Lauer, Tanja Siegmann-Hegerfeld, Michael
Harasek, Vienna University of Technology;
Christian Krenn, Guenther Pessl, BMW
Motoren GmbH
Performance and Emission Characteristics
of Fish oil Biodiesel and Diesel Blend in a
Medium Capacity C.I. Engine Employing
EGR
Experimental Measurements of
Condensation Heat Transfer Coefficients for
Refrigerant HFO-1234yf
3D-Semi 1D Coupling for a Complete
Simulation of an SCR System
(2013-01-1040)
(2013-01-1493)
(2013-01-1575)
Manish V, Sahil Gupta, Naveen Kumar,
Varun Vohra, Delhi Technological University
Gursaran D. Mathur, CalsonicKansei North
America Inc.
Zainal Abidin, Kaushik Das, Charles
Roberts, Southwest Research Institute
Simulated Fuel Economy and Emissions
Performance during City and Interstate
Driving for a Heavy-Duty Hybrid Truck
Measurement and Visualization of R134a
Distribution in the Vertical Header of the
Microchannel Heat Exchanger
Extended Kalman Filter Estimator for NH3
Storage, NO, NO2 and NH3 Estimation in
a SCR
(2013-01-1033)
(2013-01-1498)
(2013-01-1581)
C. Stuart Daw, Zhiming Gao, David E.
Smith, Tim J. Laclair, Josh A. Pihl, K. Dean
Edwards, Oak Ridge National Laboratory
Yang Zou, Predrag Hrnjak, Univ of Illinois at
Urbana-Champaign
Harsha Shankar Surenahalli, Gordon Parker,
John Johnson, Michigan Technological Univ
An Experimental Investigation on
Performance and Emission Studies of a
Single Cylinder Diesel Engine Fuelled with
Blends of Diesel and Mahua Oil Methyl Ester
Periodic Reverse Flow and Boiling
Optimal SCR Control Using Data-Driven
Fluctuations in a Microchannel Evaporator
Models
of an R134a Mobile Air-Conditioning System
(2013-01-1041)
(2013-01-1500)
(2013-01-1573)
Vipul Vibhanshu, M.Tech (Thermal
Engineering); Naveen Kumar, Delhi
Technological University; Ashish Singh,
Chinmaya Mishra, M.Tech (Thermal
Engineering)
Hanfei Tuo, Predrag Hrnjak, Univ. of Illinois
at Urbana-Champaign
Andrew Stevens, Yannan Sun, Jianming
Lian, Maruthi Devarakonda, Pacific
Northwest National Laboratory; Gordon
Parker, Michigan Technological Univ
Cost Comparison of Wind Energy Delivered
as Electricity or Hydrogen for Vehicles
Development of a S-FLOW System and
Control (S‑FLOW: Energy Saving Air Flow
Control System)
A Modeling Study of SCR Reaction Kinetics
from Reactor Experiments
(2013-01-1038)
(2013-01-1499)
(2013-01-1576)
Marc W. Melaina, Genevieve Saur, National
Renewable Energy Laboratory
Koichi Tabei, Toyota; Masashi Watanabe,
Nobuyuki Doi, Kenjiro Imai, Denso; Stefan
Young, Toyota Technical Center USA Inc
Xiaobo Song, Gordon Parker, John
Johnson, Jeffrey Naber, MIchigan
Technological University; Josh Pihl, Oak
Advances in Alternative Energy
Sources for Sustainable
Development in the
Transportation Sector (SDP110)
Chat with the Expert - LD/HD
Future Emission Technologies
(PFLCHAT420)
This session explores advances in the
creation of sustainable energy sources
and their usage in the transportation
sector. Topics can include research
and in-production technology used to
produce renewable energy sources and
materials. A discussion on lifecycle analysis
of the energy sources is also highly
recommended. The SDPC encourages
usage of papers, presentations, and
panels in this session to display leading
edge technologies and practical tools for
engineers.
1:00 p.m. - 3:40 p.m.
Organizers:
Rahul Jhavar, Ph.D., Caterpillar Inc.
Panelists:
Clean Transport
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
O3-46
73
TIME
D0-03A
W2-60
O2-37
(HX104)
Modeling (Part 2) (PFL407)
attribute and is strongly associated with
brand image. Performance and quality
of the climate control system are critical
to customer satisfaction. The system
has strong interaction with other vehicle
systems. Its primary objective is to
deliver thermal comfort and safety of the
occupants. Energy Efficiency including
lubrication variaion, refrigerant distribution
and improved simulation are among the
recent advances.
diesel engine exhaust aftertreatment
system models as well as their validation
and application. Technologies covered
include DOC, HC Trap, DPF, LNT, SCR,
ammonia oxidation catalysts, hybrid or
combined catalysts, urea-water solution
spray dynamics, and mixture non-uniformity.
Modeling aspects range from fundamental,
3D models of individual components to
system level simulation, optimization, and
control.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
Moderators:
Organizers:
Organizers:
Opportunities and Control Measures for
Sustainable Transport Growth in Emerging
Economy Regions-India
Refrigerant and Lubricant Distribution in
MAC System
1D Model of a Copper Exchanged Small
Pore Zeolite Catalyst Based on Transient
SCR Protocol
(2013-01-1037)
(2013-01-1496)
(2013-01-1578)
Prashant Kumar Banerjee, Manohar
Chaudhari, Uday Salunkhe, S Ravishankar,
Tata Motors, Ltd.
Shenghan Jin, Pega Hrnjak, Creative
Thermal Solutions and ACRC,UIUC
Maruthi Devarakonda, Jong Lee, George
Muntean, Pacific Northwest National
Laboratory; Josh Pihl, Stuart Daw, Oak
Compressor Body Temperature and
Lubrication
Design Optimization of an Emissions
Sample Probe Using a 3D Computational
Fluid Dynamics Tool
(2013-01-1501)
(2013-01-1571)
Yinhua Zheng, Visteon Corporation
Xiaogang Zhang, Paul Tennison, Jianwen Yi,
Ruona William, Ford Motor Co.
Advances in Alternative Energy
Sources for Sustainable
Development in the
Transportation Sector (SDP110)
Future Emission Technologies
(PFLCHAT420)
This session explores advances in the
creation of sustainable energy sources
and their usage in the transportation
sector. Topics can include research
and in-production technology used to
produce renewable energy sources and
materials. A discussion on lifecycle analysis
of the energy sources is also highly
recommended. The SDPC encourages
usage of papers, presentations, and
panels in this session to display leading
edge technologies and practical tools for
engineers.
1:00 p.m. - 3:40 p.m.
Organizers:
Rahul Jhavar, Ph.D., Caterpillar Inc.
Panelists:
Clean Transport
3:00
p.m.
O3-46
3:20
p.m.
3:40
p.m.
Effect of Lubricant on Two-phase
Refrigerant Distribution in Microchannel
Evaporator
(2013-01-1508)
Huize Li, Predrag Hrnjak, Univ of Illinois at
Urbana-Champaign
10:01
p.m.
On the Design of High Power Low
Frequency Harvesters for Car Engine
(2013-01-1042)
Hany Sherif, College of Eng., Qassim
University; Mohamed Eltaib, Eng College
Qassim Univ & Assiut Univ.; Abdullah
Alsuwaiyan, Unayzah Eng College., Qassim
University
10:02
p.m.
Comparative Analysis of Twin Cylinder
C.I.Engine Fueled with Diesel and
Preheated Karanj Oil (Written Only -- No
Oral Presentation)
(2013-01-1043)
Vivek W Khond, G H Raisoni College Of
Engineering
Board
74
TIME
O2-43
In-Use and On-Board Emissions
Measurement (PFL410)
engine emissions measurement from
an in-use and OBD perspective. This
covers data collection during real-world
operation, including various advanced
analysis techniques to report and determine
emissions levels under in-use operations.
It also covers the topics related to the
on-board detection of emissions for
control of aftertreatment devices and to
ensure continued functionality of emissions
compliance strategies.
1:40 p.m. - 4:00 p.m.
Organizers:
Shouxian Ren, General Motors LLC; Hui Xu,
Cummins Inc.
1:40
p.m.
Statistical Investigation of In Use Emissions
and Fuel Consumption Measured by PEM
on Different Gasoline Cars
(2013-01-1511)
Livia Della Ragione, Giovanni Meccariello,
Maria Vittoria Prati, Istituto Motori CNR
2:00
p.m.
About Cross-Sensitivities of NOx Sensors in
SCR Operation
(2013-01-1512)
Arnaud Frobert, Stephane Raux, Yann Creff,
Eric Jeudy, IFP Energies nouvelles
2:20
p.m.
Internal Combustion Engine Response
to Presence of Combustion Inhibitors in
Ambient Air
(2013-01-1513)
Yuri Shukhman, Vladimir Baibikov, Abraham
Marmur, Mark Veinblat, Leonid Tartakovsky,
Technion Israel Inst. of Technology
2:40
p.m.
Real World Diesel Engine Greenhouse Gas
Emissions for Diesel Fuel and B100
(2013-01-1514)
Grzegorz Przybyla, Silesian University of
Technology; Seyed Hadavi, Hu Li, Univ of
Leeds; Gordon E. Andrews, University of
Leeds
3:00
p.m.
PM Sensor Based On-Board Diagnosis of
Particulate Filter Efficiency
(2013-01-1515)
Andreas Hoepfner, Christian A. Roduner,
AVL Software and Functions GmbH
3:20
p.m.
Real-Time On-Board Indirect Light-Off
Temperature Estimation as a Detection
Technique of Diesel Oxidation Catalyst
Effectiveness Level
(2013-01-1517)
Raymond Sutjiono; Prateek Tayal, Keqin
Zhou, Purdue University; Peter Meckl,
Purdue Univ-West Lafayette
3:40
p.m.
Combustion and Emission Characteristics
of a Heavy-Duty Diesel Engine at Idle at
Various Altitudes
(2013-01-1516)
Xin Wang, Yunshan Ge, Linxiao Yu, Beijing
10:01
p.m.
Examining the Influence of Road Grade on
Vehicle Specific Power (VSP) and Carbon
Dioxide (CO2) Emission over a Real-World
Driving Cycle (Written Only -- No Oral
Presentation)
(2013-01-1518)
David W. Wyatt, Hu Li, James Tate,
University of Leeds
Technical Session Oral Evaluation
Incentives
In an effort to collect more evaluation ratings
for the technical session speakers, SAE will
be holding daily drawings for anyone who
completes an oral evaluation card distributed
in technical session rooms. Simply complete
the card, tear off the perforation with your
name and contact number, and turn it in to
the session moderator. Six (6) winners will be
announced daily to receive prizes. Winners
will be announced daily and posted in the
technology lounges.
75
EXHIBITOR LIST
Beijing Trend Aofu Fine Ceramics
Co Ltd................................................421
BuhlerPrince Inc....................................327
Camera Commercio Di Torino...............925
CD-adapco...........................................301
Centro Estero Internazionalizzazione
s.c.p.a................................................925
dSpace Inc............................................401
EmiSense Technologies LLC...............1213
From Concept to Car............................925
Gamma Technologies Inc......................906
Granta Design.......................................419
The Lubrizol Corp..................................631
Marsilli Group......................................1101
MEET Automotive................................1018
Nissan Motor Company.........................425
Reaction Design Inc..............................801
Co Ltd................................................437
Sichnan Exhaust Purge Co Ltd.............630
Software Cradle.....................................802
Think Up................................................925
Transportation Research Center Inc......907
Twintec Technologie GmbH...................733
ULVAC...................................................424
Become a Better You. Volunteer.
Volunteering with SAE can build upon your strengths. When you
volunteer with SAE, you make an impact not only on your career,
but also on the future of those with whom you share your expertise.
Volunteering with SAE gives you the opportunity to:
• Boost your career options
• Learn or develop new skills
• Be part of your professional & local community
• Give back to future generations of engineers
Now is the time to focus on enhancing your professional relevance and expanding your portfolio.
SAE provides many volunteer opportunities with short-term commitments, but long-term value.
SAE offers a wide variety of volunteer opportunities for those wishing
to advance their interests, careers, and industries.
•
•
•
•
•
•
•
•
•
Technical Standards Development Service
Engineering Meetings Planning & Development Service
Technical Paper and Book Authorship
Award Committee Membership
Company Representatives
Local Chapters/Section Officers
Student Chapter Leaders
World in Motion Classroom Volunteers (K-12 education)
SAE Volunteer Executive Leadership
volunteers.sae.org
The society dedicated to advancing mobility
engineering worldwide.
P90723
76
The quest for lighter, greener vehicles leads
to the society for advancing
the mobility industry.
Advanced Materials standards & resources
from SAE International.
Automakers are in overdrive to meet the U.S. federal mandate for a 54.5-mpg fleet average
in the 2025MY. That’s in addition to a bevy of other upcoming governmental fuel economy
and CO2 emissions regulations around the globe they and commercial vehicle makers alike
must comply. Meanwhile, ever-rising gas prices have made increasing the effectiveness of
fuel burned an even greater priority in the aerospace industry.
Mass reduction technology or lightweighting through the use of advanced materials is a
promising path towards helping to lower fuel consumption and vehicle CO2 emissions.
From the first engine oil viscosity standards and common international material documents
for increased aircraft production during WWI, SAE International has been at the forefront
of the most significant vehicle technology advances for more than 100 years. Through its
market-driven, voluntary consensus standards program and its library of mobility engineering
information – the largest of its kind – SAE has worked hand-in-hand with the global aerospace
and ground vehicle communities to solve its greatest transportation challenges.
And, it can do the same for industry’s quest for lighter, greener vehicles.
PUBLICATIONS
Weight Reduction in Automotive Design &
Manufacture (MR-SB-143)
Carbon Fibre in Automotive Applications
(MR-SB-113)
Automotive Carbon Fiber Composites (T-124)
Engineering Plastics & Plastic Composites in
Automotive Applications (T-122)
Structural Composite Materials (B-ASM-031)
Technology for Magnesium Castings (B-928)
Polymer Matrix Composites 3-Volume Set
(R-422.SET3):
Vol. 1: Guidelines for Characterization of
Structural Materials
Vol. 2: Materials Properties
Vol. 3: Materials Usage, Design, & Analysis
Polymers in Aerospace Applications
(B-RAP-001)
Some 622 Standards and Papers published
in the last 3 years on Adhesives and Sealants;
Aluminum/Alloys; Composites; Lightweight
Materials; Magnesium/Alloys; Nanomaterials;
Polymers
Material Selection & Testing for Plastics
(C0134)
Recent Developments in Aerospace
Manufacturing, Materials, & Structures SAE
Technical Paper Collection (COLL-TP-00108)
EVENTS
Composite Materials SAE Standards
Subscription (SUB-STD-00008)
Advances In lightweighting sessions at the
AMS Metals: Carbon & Low Alloy Steels SAE
Standards Subscription (SUB-STD-00028)
STANDARDS DEVELOPMENT
TRAINING
Engineering Alloys Properties & Applications
(C0010)
Fundamental Mass Reduction/Light Weighting
Techniques (WB1129)
Advanced High Strength Steels for Vehicle
Weight Reduction (C0916)
Automotive Composites Technology Engineering
(ACAD08)
SAE 2013 Design, Manufacturing & Economics
of Composites Symposium
Known throughout the world for its Aerospace
Material Standards (AMS), offers 32 materials
related technical committees including
those that address elastomers, polymerics,
composites, and non-ferrous alloys
25 Ground Vehicle Committees develop
standards on such material topics as Carbon
& Alloy Steels, Plastics, Fatigue Design &
Evaluation, Green Bio-Materials; a new steering
group on Material Substitution has been formed
Find these and much more at www.sae.org
P122151
integrated design & MANUFACTURING
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
4
-
-
-
-
-
D0-02A
79
CAD/CAM/CAE Technology (Part 1 & 2) (B101)
-
-
4
4
-
-
D0-02A
83, 84
Chat with the Expert: Making Design Decisions Involving Multiple
Performance Attributes (IDMCHAT20)
-
-
-
4
-
-
D0-02B
84
Chat with the Experts: Why Industrial Companies have Problems
with Recalls, Quality, and Reliability, and Less Profit than Planned.
The Way for Improvement this Situation (IDMCHAT10)
-
4
-
-
-
-
D0-02B
80
Design Optimization - Methods and Applications (Part 1 & 2) (B103)
-
-
4
4
-
-
D0-03
C&D
81, 82, 84
Design Tools/Digital Modeling/Rapid Prototyping (B104)
-
-
4
-
-
-
D0-02A
81, 82
Key Success Factors of Lean Manufacturing Implementation
(IDM400)
-
-
-
-
4
-
D0-02B
85
Panel discussion: Reliability Assessment, Model Validation, and the
new SAE J2940 Standard (IDM900)
-
-
-
-
-
4
D0-04AB
85
Reliability and Robust Design in Automotive Engineering:
Assessment of Reliability and Robustness and Reliability
Applications (IDM102)
-
-
4
-
-
-
D0-02B
81, 82
Reliability and Robust Design in Automotive Engineering: Decision
Under Uncertainty/Uncertainty Modeling (IDM104)
-
-
4
-
-
-
D0-02B
81, 82
Reliability and Robust Design in Automotive Engineering: Design
for Six Sigma (IDM107)
-
4
-
-
-
-
D0-02B
80
Reliability and Robust Design in Automotive Engineering: Model
Validation and Verification (IDM106)
-
-
-
-
-
4
D0-02B
85
Reliability and Robust Design in Automotive Engineering: Reliability
and Accelerated Testing (IDM103)
4
-
-
-
-
-
D0-02B
79
Reliability and Robust Design in Automotive Engineering: Reliability
and Robust Design in Automotive Aero-Thermal and Fluid Systems
(IDM105)
-
-
-
4
-
-
D0-02B
84
Reliability and Robust Design in Automotive Engineering:
Reliability-Based Design Optimization and Robustness (IDM108)
-
4
-
-
-
-
D0-02B
80
4
-
-
-
-
-
D0-02B
79
Virtual Design and Engineering (IDM301)
-
-
-
-
4
-
D0-02B
85
Wiper Systems (B109)
-
-
4
-
-
-
D0-02A
83
Body Engineering and Design (B100)
Trends in Development of Accelerated Reliability and Durability
Testing Technology (IDM300)
78
TIME
D0-02A
D0-02B
Trends in Development of
Accelerated Reliability and
Durability Testing Technology
(IDM300)
Reliability and Robust Design
in Automotive Engineering:
Reliability and Accelerated
Testing (IDM103)
This session presents the paper, practices
and technology used in development of
trends in reliability and durability testing (ART/
ADT) technology and accurate prediction.
The purpose is covering a new ideas and
unique approaches to accurate simulation
and integration of field inputs, safety, and
human factors, improvement the ART/ADT
steps-components, implementation that
leads to reduce recalls, cost, and time during
design, manufacture, and usage. It leads to
accelerated product development.
This session presents methods and
automotive applications on how to assess
reliability and robustness in product
development. Topics include among others,
system reliability target allocation, interval
analysis in robust design and imprecise
reliability assessment. It also addresses new
developments and applications in the area
of accelerated testing.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:30 a.m.
10:30 a.m. - 11:30 a.m.
Organizers:
Vesna Savic, Mallikarjuna Bennur, General
Motors LLC; Raghu Echempati, Kettering
Univ.; Ramakrishna Koganti, RAMK Inc.;
Kevin Smith, Auto Technology Company
Organizers:
Lev Klyatis, Sohar Inc.; Efstratios Nikolaidis,
University Of Toledo
Organizers:
Paul Lubinski, Thermo King Corp.; Zissimos
Mourelatos, Oakland University
New Light Truck Platform Chassis
Development of Accelerated Reliability/
Durability Testing Standardization as a
Component of Trends in Development
Accelerated Reliability Testing (ART/ADT)
(2013-01-0370)
(2013-01-0151)
Body Engineering and Design
(B100)
9:30
a.m.
D0-02B
Joshua C. Johnson, Honda R&D Americas, Inc. Lev Klyatis, Sohar Inc.
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
11:10
a.m.
Application of an FSW Continuous Welding
Technology for Steel and Aluminum to an
Automotive Subframe
Development Standardization “Glossary”
and “Strategy” for Reliability Testing as a
Component of Trends in Development of
ART/ADT
(2013-01-0372)
(2013-01-0152)
Shosuke Ohhama, Tsunehisa Hata, Honda
R&D Co., Ltd. Automobile R&D; Takanori
Yahaba, Honda Motor Co.,Ltd. Suzuka
Factory; Tsutomu Kobayashi, Tetsuya
Miyahara, Mitsuru Sayama, Honda R&D
Co., Ltd. Automobile R&D
Application of a Novel Metal Folding
Technology for Automotive BiW Design
Road Simulation Bench as a Tool to Reduce
Time and Costs in Comparison with Proving
Ground Testing - Correlation Study
(2013-01-0373)
(2013-01-0150)
Paul Venhovens, CU-ICAR Clemson
Univ.; Keith Bell, Industrial Origami, Inc;
Prathamesh Marathe, Aniket Patkar,
Frederick LaMance, Daniel Lind, Chris
D’Amico, CU-ICAR Clemson Univ.
Marcella Turano, Fulvio Civera, Magneti
Marelli S.p.A Exhaust Systems; Guilherme
Figueiredo, Fiat Brasil; Marco Margaria,
Magneti Marelli S.p.A Exhaust Systems;
Andre Smith Pereira, Magneti Marelli
Sistemas Automotivos
Corrosion Simulation Tests: Analysis and
Improvement of Corrosion Resistance for
Automotive Components
Inverse Power Law Model for Operative Life
Estimation of Carbon Steel Stub Axle
(2013-01-0335)
(2013-01-0328)
Manjula Panyam, Hariharan Venkatraman,
Tata Motors Ltd
Engku A. Azrulhisham, Wan Mansor Wan
Mohamad, Universiti Kuala Lumpur; Hairul
Fahmi Abdul Hamid, Perusahaan Otomobil
Nasional Sdn Bhd
Optimization of Body Attachment for Road
Noise Performance
Estimation of One-Sided Lower Tolerance
Limits for a Weibull Distribution Using the
Monte Carlo Pivotal Simulation Technique
(2013-01-0369)
(2013-01-0329)
Hyungtae Kim, Jungseok DO, Sehwun oh,
Kichang Kim, Hyundai & Kia Corp.
Sandeep Makam, Yung-Li Lee, Pradeep
Attibele, Chrysler Group LLC
Efficient and Light Weight Door Panels for
Automobiles
(2013-01-0374)
Anurag gajji, Tarun Gupta, Maruti Suzuki
India Limited
10:01
p.m.
Application of Dimensional Analysis to
Reliability Testing (Written Only -- No Oral
Presentation)
(2013-01-0153)
Lev Gorelik
Planned by Body Engineering Committee /
Automobile Body Activity
Planned by Quality, Reliability and Robust
Design Committee / Integrated Design and
Manufacturing Activity
79
TIME
D0-02B
D0-02B
D0-02B
Reliability-Based Design
Optimization and Robustness
(IDM108)
Reliability and Robust Design in
Automotive Engineering: Design
for Six Sigma (IDM107)
Chat with the Experts: Why
Industrial Companies have
Problems with Recalls, Quality,
and Reliability, and Less Profit
than Planned. The Way for
Improvement this Situation
(IDMCHAT10)
This session will address heoretical
developments and automotive applications
in RBDO and Robust Design. Topics
include: computational algorithms for
efficient estimation of reliability, Monte Carlo
simulation, Bayesian reliability, DempsterShafer Evidence Theory, and MultiDisciplinary Optimization.
Design for Six Sigma (DFSS) is a powerful
engineering process for designing robust,
high quality products that consistently
meet or exceed customers’ expectations.
This session will address new technical
advances in DFSS and provide valuable
insight into its application through the
presentation of significant real-world case
studies
This Chat is considering how, if one wants
to save money in testing during design
and manufacturing, the end results will be
a huge loss of much more money due to
faulty product, which have to be replaced,
because of this mistake. The result is lower
quality, reliability, safety, higher life cycle
cost, than it might be. The basic reason is
changing two meanings - cause and effect.
It will be discuss how one can eliminate this
negative situation, consider examples from
well-known companies.
1:00 p.m. - 1:40 p.m.
2:00 p.m. - 3:00 p.m.
4:00 p.m. - 5:00 p.m.
Organizers:
David Dronzkowski, Chrysler Group
LLC; David A. Lamb, US Army TARDEC;
Organizers:
Richard Amori, Ford Motor Co.; Mohammad
Hijawi, Chrysler Group LLC; Robert Lust;
Yih-Chyun Sheu, Chery Automobile Co.,
Ltd.
Organizers:
Chairpersons:
Panelists:
Bryan Dodson, SKF
Todd Gross, Johnson Controls
Lev Klyatis, Sohar Inc
1:00
p.m.
Sampling-Based RBDO Using Score
Function with Re-Weighting Scheme
(2013-01-0377)
Shih-Po Lin, University of California, Los
Angeles; Lei Shi, Shanghai Jiao Tong
University; Ren-Jye Yang, Ford Motor Co.
1:20
p.m.
A Fatigue Design Approach Based on
Historical Fatigue S-N Test Data
(Oral Only)
Limin Luo; Fulun Yang, Tenneco Inc
2:00
p.m.
Integrated Virtual Approach for Optimization
of Vehicle Sensitivity to Brake Torque
Variation
(2013-01-0596)
Bo Zhang, Charles Beyer, Jack Pelkey,
Glenn Whitehead, Alexandre Opeiko,
Chrysler Group LLC
2:20
p.m.
Systems Engineering Excellence Through
Design: An Integrated Approach Based on
Failure Mode Avoidance
(2013-01-0595)
Ioan Felician Campean, Ed Henshall,
University of Bradford; Brian Rutter, Ford
Motor Company
2:40
p.m.
Lessons from 15 Years of DFSS at GE and
Implications for the Future
(Oral Only)
Gene Wiggs, GE Aviation; Martha Gardner,
GE Global Research
10:01
p.m.
Robust Design of Load Sensing
Proportional Valve by Orthogonal
Experiment Analysis with Constrained Multiobjective Genetic Algorithm (Written Only
(2013-01-0378)
Zeyu Ma, Jinglai Wu, Ankang Jin, Yunqing
Zhang, Huazhong University of Science
and Tech.
80
TIME
D0-03 C&D
D0-02B
D0-02B
Design Tools/Digital Modeling/
Rapid Prototyping (B104)
Assessment of Reliability and
Robustness and Reliability
Automotive Engineering: Decision
Under Uncertainty/Uncertainty
Modeling (IDM104)
The session focuses on the design of
tools involved in manufacturing processes.
Researchers and engineers involved in
development in simulation and digital
modeling of manufacturing process,
innovative materials used and technology
expediting the process in rapid prototyping
are encouraged to participate. Studies in
wear patterns, failure modes, extending life
in modern tools, optimal layout of tools are
also welcome.
Theoretical developments and automotive
applications in RBDO and Robust Design
are presented in this session. Topics
include computational algorithms for
Methods for modeling uncertainty and
decision making under uncertainty are
presented in this session. Both theoretical
developments and practical applications
from the automotive industry are covered.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 9:40 a.m.
9:40 a.m. - 11:20 a.m.
Organizers:
Mallikarjuna Bennur, General Motors LLC;
Hasetetsion G. Mariam; Vesna Savic,
General Motors LLC
Organizers:
William J. Altenhof; Randy Gu, Oakland
Univ.; Yun Lu, Chrysler Group LLC; Pilaka
V. Murty, Gayatri Vidya Parishad College of
Engine; Yu J. Teng, Chrysler Group LLC
Organizers:
Zissimos Mourelatos, Oakland University;
Efstratios Nikolaidis, University Of Toledo
Organizers:
Efstratios Nikolaidis, University Of Toledo;
Vijitashwa Pandey, Oakland University; Paul
Lubinski, Thermo King Corp
Technical Keynote: Optimization in Complex
Constraint Situations for the Early Vehicle
Design Phase
Technical Keynote: Driving Innovation - The
Automobile Design Revolution Comes
Down From The Cloud
HMMWV Axle Testing Methodology to
Determine Efficiency Improvements with
Superfinished Hypoids
(Oral Only)
(Oral Only)
(2013-01-0605)
Hans Zimmer, SFE GmbH
Gregg Nichols, Autodesk Inc.
Brian David Dykas, US Army Research
Laboratory; Denise M. Rizzo, US Army
TARDEC; Doug Fussner, Randy McDonnell,
Southwest Research Institute; Mark Riggs,
The Ohio State University
Design Optimization - Methods
and Applications (Part 1 of 2)
(B103)
8:00
a.m.
D0-02A
8:20
a.m.
Chairpersons:
New Metrics to Assess Reliability and
Functionality of Repairable Systems
(2013-01-0606)
Vijitashwa Pandey, Zissimos Mourelatos,
Oakland University
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
Controlling the Forming of Thermoplastics
through Forming Power
Probability of Failure of Dynamic Systems
by Importance Sampling
(2013-01-0602)
(2013-01-0607)
Patrick Girard, Zohir Benrabah, National
Research Council Canada; Hicham Mir,
Inergy Automotive Systems Research SA
Mahdi Norouzi, Efstratios Nikolaidis, Univ
of Toledo
Development of CFD Shape Optimization
Technology using the Adjoint Method and
its Application to Engine Intake Port Design
A Method for Precise Placement of Hose
Models
Application of Subset Simulation with
Markov Chain Monte Carlo and Splitting to
Time-Dependent Reliability Estimation
(2013-01-0969)
(2013-01-0603)
(Oral Only)
Shigefumi Tokuda, Masato Kubota, Yasushi
Noguchi, Toyota Motor Corp
Mitchel Keil, Western Michigan Univ.; Jai
Thomas, Caterpillar Inc.
Zhonglai Wang, Zissimos Mourelatos,
Oakland University; Jing Li, Oakland Univ;
Amandeep Singh, Igor Baseski, US Army
TARDEC
A Non-parametric Free-form Optimization
Method for Controlling the Stiffness of
Automotive Sheet Metal Structures
The Automatic Aerodynamic CFD
Framework Employing Vehicle
Specifications at the Concept Stage of
Development
(2013-01-0962)
(2013-01-0604)
Masatoshi Shimoda, Yang Liu, Toyota
Technological Institute
Takashi Takiguchi, Kenta Ogawa, Hiroyuki
Tateyama, Tatsuya Oda, Honda R&D
Co.,Ltd.
Sequential DoE Framework for Steady State
Model Based Calibration
Managing the Computational Cost of Monte
Carlo Simulation with Importance Sampling
by Considering the Value of Information
(2013-01-0972)
(2013-01-0943)
Mohammed Reza Kianifar, Loan Felician
Campean, University of Bradford; Dave
Richardson, Jaguar Cars Ltd.
Efstratios Nikolaidis, Mahdi Norouzi,
University of Toledo; Zissimos Mourelatos,
Methodology for the Design of a DoubleWishbone Suspension System by Means of
Target Cascading: Problem Statement
Uncertainty Analysis of Estimated
Parameters for Test Data with Small Sample
Size
(2013-01-0973)
(2013-01-0945)
Juan Blanco, Luis Munoz, Universidad de
los Andes
Zhigang Wei, Tenneco Automotive Co.,
Ltd.; Fulun Yang, Limin Luo, Shengbin Lin,
Tenneco Inc
81
TIME
D0-03 C&D
10:40
a.m.
D0-02B
D0-02B
Design Tools/Digital Modeling/
Rapid Prototyping (B104)
Assessment of Reliability and
Robustness and Reliability
Automotive Engineering: Decision
Under Uncertainty/Uncertainty
Modeling (IDM104)
The session focuses on the design of
tools involved in manufacturing processes.
Researchers and engineers involved in
development in simulation and digital
modeling of manufacturing process,
innovative materials used and technology
expediting the process in rapid prototyping
are encouraged to participate. Studies in
wear patterns, failure modes, extending life
in modern tools, optimal layout of tools are
also welcome.
Theoretical developments and automotive
applications in RBDO and Robust Design
are presented in this session. Topics
include computational algorithms for
Methods for modeling uncertainty and
decision making under uncertainty are
presented in this session. Both theoretical
developments and practical applications
from the automotive industry are covered.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 9:40 a.m.
9:40 a.m. - 11:20 a.m.
Organizers:
General Motors LLC
Organizers:
William J. Altenhof; Randy Gu, Oakland
Univ.; Yun Lu, Chrysler Group LLC; Pilaka
V. Murty, Gayatri Vidya Parishad College of
Engine; Yu J. Teng, Chrysler Group LLC
Organizers:
Efstratios Nikolaidis, University Of Toledo
Organizers:
Vijitashwa Pandey, Oakland University; Paul
Lubinski, Thermo King Corp
(B103)
10:20
a.m.
D0-02A
Chairpersons:
Methodology for the Design of a DoubleWishbone Suspension System by Means
of Target Cascading: Model-Geometry
Interactions and Case Study
A Comparison of Methods for Representing
and Aggregating Uncertainties Involving
Sparsely Sampled Random Variables - More
Results
(2013-01-0971)
(2013-01-0946)
los Andes
Vicente Romero, Sandia National
Laboratories; Joshua Mullins, Vanderbilt
University; Laura Swiler, Angel Urbina,
Sandia National Laboratories
Target Cascading Optimization of the
Kinematics of a Steering System Coupled to
a Double Wishbone Suspension System of
a Hybrid Off-Road Vehicle
A Methodology for Design Decisions using
Block Diagrams
(2013-01-0967)
(2013-01-0947)
los Andes
Vijitashwa Pandey, Zissimos Mourelatos,
Oakland University
11:00
a.m.
Combined Variation Modeling of Structural
and Tuning Components for Vehicle
Performance Assessment
(2013-01-0944)
Bo Zhang, James Robertson, Glenn
Whitehead, Chrysler Group LLC;
Ravindranadh Pillutla, Satyam-Venture
Engineering Service Ltd.
10:01
p.m.
Stiffness Evaluation Method for BIW with
Sensitivity Coefficients (Written Only -- No
Oral Presentation)
Modeling of Lithium-ion Battery
Management System and Regeneration
Control Strategy for Hybrid Electric Vehicles
A Polynomial Chaos- Based Likelihood
Approach for Parameter Estimation of Load
Sensing Proportional Valve (Written Only -No Oral Presentation)
(2013-01-0975)
(2013-01-0939)
(2013-01-0948)
Yuan Qu, Linbo Zhang, Shen Wu, Wang
hongbin, Chery Automobile Co., Ltd.
Zhengshu Zhu, Michigan Technological
Univ.
Zeyu Ma, Jinglai Wu, Yunqing Zhang,
Huazhong University of Science and Tech.
82
TIME
D0-02A
9:40
a.m.
D0-02A
Wiper Systems (B109)
CAD/CAM/CAE Technology (Part
1 of 2) (B101)
9:40 a.m. - 10:00 a.m.
10:20 a.m. - 11:40 a.m.
Organizers:
Randy Gu, Oakland Univ.; Yu J. Teng,
Chrysler Group LLC; William J. Altenhof;
Yun Lu, Chrysler Group LLC; Pilaka V.
Murty, Gayatri Vidya Parishad College of
Engine
Organizers:
Randy Gu, Oakland Univ.; Yun Lu, Yu
J. Teng, Chrysler Group LLC; William J.
Altenhof; Pilaka V. Murty, Gayatri Vidya
Parishad College of Engine
Integrated Design &
Manufacturing
Development of Backlash-Less Reduction
Structure Capable of Suppressing Wiper
Reversing Sound
(2013-01-0958)
Masayuki Shimoyama, Shoda Hirokazu,
Kanda Satoshi, Ohashi Yasuo, Mitsuba
Corp.
10:20
a.m.
Titles include:
Full-Vehicle Model Development for
Prediction of Fuel Consumption
(2013-01-1358)
Paul Goossens, Maplesoft; Avesta
Goodarzi, University of Waterloo
10:40
a.m.
Kinematic Modeling and Analysis of a Cam
Based CVT
(2013-01-1371)
Gregory Fitzpatrick Hickman, Randy Gu,
Yin-Ping Chang, Oakland University
11:00
a.m.
Innovative Process-Integrated
Measurements of Products and Parts
- Patented Grid Application of Stereo
Photography and Photogrammetry
(2013-01-1376)
Christian-Andreas Schumann, West Saxon
University of Zwickau; Egon MUELLER,
Chemnitz University of Technology;
Dieter Gerlach, Dimensional Technology
International Inc; Claudia Tittmann, West
Saxon University of Zwickau; MartinAndreas Schumann, Chemnitz University of
Technology
11:20
a.m.
Body Engineering and
Design, 2013
CAD/CAM/CAE Technology, 2013
Design Optimization – Methods
and Applications, 2013
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
(2013-01-1363)
Chris Friedl, Autodesk Australia Pty. Ltd.;
Matthew Watts, RMIT University, Australia
Estimation of Piston Assembly Friction by
Finite Element Approach (Written Only -- No
Oral Presentation)
Edited by Ronald K. Jurgen
(2013-01-1378)
Ravindra R. Malagi, Gogte Institute
of Tecnology ,Belgaum; Shivakant N.
Kurbet, Basaveshwara Engg College; N.
Gowrishenkar, India Piston Rings, Ltd.
10:02
p.m.
A Method for Locator Errors Compensation
in the Fixture - Workpiece System (Written
(2013-01-1382)
S. Khodaygan, K. N. Toosi University of
Technology
10:03
p.m.
Development on Rapid Assembly System
of Crash Safety CAE Modeling (Written Only
P135215
V2V/V2I challenges
explored in this
comprehensive
new book
Drag Coefficient Measurement, LES
Simulation and Validation of an Automotive
Body
10:01
p.m.
Automotive Engineering, 2013
23 Papers (estimate)
COLL-TP-00334
Covering the latest technological developments, design
considerations and key issues such as the need for
extreme reliability assurances and traffic congestion
overloads on the system, this book takes a comprehensive
look at these evolving systems and the challenges in
developing them.
ISBN: 978-0-7680-7725-4
Product Code: PT-154
List Price: $119.95
(2013-01-1380)
Hui TANG, Geely Engineering Inst.
Join SAE and Save! Visit
www.sae.org/membership
P12796
Order today!
Online: books.sae.org/book-pt-154
Phone: 1-877-606-7323 (U.S. & Canada)
83
TIME
D0-02A
CAD/CAM/CAE Technology (Part
2 of 2) (B101)
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
D0-03 C&D
(B103)
D0-02B
D0-02B
Automotive Aero-Thermal and
Fluid Systems (IDM105)
Chat with the Expert: Making
Design Decisions Involving
Multiple Performance Attributes
(IDMCHAT20)
The purpose of this session is to bring
awareness among the automotive
aerodynamics, thermal and hydraulic
systems development community to
address the need of reliability analysis and
robust design to improve the overall product
quality. This session also introduces CAE
based optimization of aero-thermal and
fluid systems to improve automotive fuel
economy. This session presents papers
covering both testing and simulation.
The development of a new consumer product
starts with the definition of performance
targets. Then the product is designed so
that it meets these targets and costs as
little as possible. Performance targets are
determined based on customer clinics and
analysis of existing successful models.
This chat will review methods for eliciting
customer preferences for performance and
cost, developing mathematical models and
making informed design decisions.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 2:40 p.m.
4:00 p.m. - 5:00 p.m.
Organizers:
Randy Gu, Oakland Univ.; Yun Lu, Yu
J. Teng, Chrysler Group LLC; William J.
Altenhof; Pilaka V. Murty, Gayatri Vidya
Parishad College of Engine
Organizers:
General Motors LLC
Organizers:
Alaa El-Sharkawy, Sadek S. Rahman,
Richard Sun, Chrysler Group LLC
Keynote Speakers:
Mohamed El-Sayed, Kettering University;
Effects of Mesh Density on Finite Element
Analysis
Design Optimization of Hybrid Body-inWhite
Analysis Led Design and Industry Trends in
1D Powertrain Simulation
(2013-01-1375)
(2013-01-0970)
(Oral Only)
Yucheng Liu, Gary Glass, Univ. of Louisiana
Paulo Reynaldo Calvo, Bertrandt AG
Sudhi Uppuluri, Computational Sciences
Experts Group
An Experimental Study on Flow Pattern
of Door Trim Speaker Grille Shape Using
Injection Molding CAE
Optimization of IDRApegasus: Fuel Cell
Hydrogen Vehicle
Application of Time Constant Analysis
for Design and Development of Thermal
Systems
(2013-01-1369)
(2013-01-0964)
(Oral Only)
Heeseung Yang, HanilE-Wha; Hyunkwon
Jo, Ikkeun Jang, Hyunmin Park, Sungyun
Yoon, Heejoong KIM, Han Il E Hwa
Nicoletta Filippo, Massimiliana Carello,
Politecnico di Torino; Massimo D’Auria, NOESIS
Solutions; Alex Marcello, Politecnico di Torino
Alaa El-Sharkawy, Chrysler Group LLC
Development of Virtual Testing of EGR
Coolant Rail
Multi-Objectives Optimization of Fastener
Location in a Bolted Joint
Characterizing Thermal Interactions
Between Engine Coolant, Oil and Ambient
for an Internal Combustion Engine
(2013-01-1373)
(2013-01-0966)
(2013-01-0960)
Samaneh Arabi, Oluremi Ayotunde
Olatunbosun, Mohammad Behroozi, Univ.
of Birmingham
Bo Zhang, Danny Brown, John St. Pierre, Xian
Tao, Ian Williams, Glenn Whitehead, Christopher
Wolfe, Chrysler Group LLC; Ravindranadh Pillutla,
Stayam-Venture Engineering Services Ltd.
Sudhi Uppuluri, Computational Sciences Experts
Group; Joe Proulx, Mentor Graphics; Boris
Marovic, Mentor Graphics (Deutschland)GmbH;
Ajay Naiknaware, CSEG, LLC
Determination of Weld Nugget Size Using
an Inverse Engineering Technique
Optimising Piston Ring Contact Face
Chamfer for High Performance Engines
Application of DFSS for Design of Heat
Exchangers
(2013-01-1374)
(2013-01-0965)
(Oral Only)
Randy Gu, Lianxiang Yang, Oakland
University; Leonid Lev, General Motors
Company; George Harmon, Chrysler Group
LLC; Nan Xu, Xin Xie, Oakland University
Matthew W. Dickinson, UCLan
Alaa El-Sharkawy, Asif Salahuddin, Chrysler
Group LLC
Buckling of Frames Subject to Multiple
Forces
Drivetrain System Design Based On an
Architecture Analysis Method
Scalable Complexity Simulation in the
Electric Vehicle Thermal Management
Development Process
(2013-01-1370)
(2013-01-0968)
(2013-01-1777)
Wenjing Wang, Beijing Jiaotong University;
Randy Gu, Oakland Univ.; Cen Li, Beijing
Jiaotong University; Lianxiang Yang,
Oakland University
Yukio Ogawa, Hiroyasu Miyoshi, Kazufumi
Iwashita, Nissan Motor Co., Ltd.; Youngwon
Park, Takeshi Abe, The University of Tokyo
Christian Rathberger, Engineering Center
Steyr GmbH & CoKG; Christoph M. Stroh,
Magna Powertrain; Alexander Lichtenberger,
Engineering Center Steyr GmbH & CoKG
A Study on Durability of Bonded Piston
Seals Considering Forming Process
An Optimized Approach to Developing An
Automotive Climate Control System
(2013-01-1367)
(Oral Only)
Yuki Takao, Kazuki Takeno, NOK Corporation
Guillaume Belloncle, Dassault Systemes
Analysis and Optimization for Cracking of
a Steering Tie Rod based on Arc Length
Algorithm
(2013-01-1377)
Yongsheng Li, Geely Automobile Research
Institute
3:20
p.m.
Theoretical Evaluation and Finite Element
Analysis of Commercial Truck Chassis Assembly
(2013-01-1361)
Sathish Kumar P, Balakrishnan M, Ashok
Leyland Technical Centre, Chennai
3:40
p.m.
Methodology for Design Simulation and
Experimental Validation of Automotive
Lighting Application
(2013-01-1372)
Venkatesha N, GE India Technology Centre
84
TIME
8:00
a.m.
D0-02B
D0-02B
Virtual Design and Engineering
(IDM301)
Key Success Factors of Lean
Manufacturing Implementation
(IDM400)
This technical session will showcase
the creation and application of various
tools that will allow for the design and
manufacture of parts, equipment,
facilities and tests that eliminate the
need for physical part prototyping
early in a program. The ability to model
various aspects of design, test and
manufacturing allows for more accurate,
cost effective and faster development
and product delivery to market.
This technical session deals with
research and development efforts
addressing the advancement and
applications of Lean methodologies
and Quality improvemant in the mobility
Industry. Papers presented in this session
will portray the latest developments in the
principles, practices, tools, processes,
and applications of Lean and Quality
improvement methodologies.
8:00 a.m. - 9:00 a.m.
9:00 a.m. - 11:20 a.m.
Organizers:
George Smith, Magna Powertrain; Paul
Zalucha, Ford Motor Co.
Organizers:
Beena Anand, Norma Group; Mohamed
El-Sayed, Kettering Univ.
TIME
Heat Exchanger Optimization using
Approximation and Parallel Parametrized
CFD (PPCFD)
D0-02B
Panel discussion: Reliability
Assessment, Model Validation,
and the new SAE J2940
Standard (IDM900)
Automotive Engineering: Model
Validation and Verification
(IDM106)
SAE Ground Vehicle Reliability committee
recently completed the SAE Standard
J2940. It is a short standard that requires
elements of quantitative Model V&V.
In particular, it requires that Reliability
and Confidence be reported as pairs
of numbers, for studies claiming
that reliability is being assessed with
validated models. The panel includes
key members of the committee that
produced the standard, including the
primary author, Dr. Roger Logan and will
address critical issues to J2940.
Model Validation and Verification invite
papers that deal with the theoretical
and/or applied aspects of one or more
of the following representative topics:
model development, model correlation/
calibration, model verification, model
validation, uncertainty quantification,
uncertainty propagation, validation
metrics, predictive capability
assessment, etc.
1:00 p.m. - 2:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
David A. Lamb, US Army TARDEC
Organizers:
Yan Fu, Ford Motor Co.; Ramesh Rebba,
General Motors LLC; Ren-Jye Yang,
Ford Motor Co.
Panelists:
Kyung K. Choi, Univ. of Iowa
Roger W. Logan, Independent
Consultant
(2013-01-1163)
Khaled Saleh, Vikrant Aute, University of
Maryland College Park; Kurt Reinhard
Radermacher, Univ. of Maryland
8:20
a.m.
D0-04AB
1:00
p.m.
Overcoming Barriers to a Successful
Vehicle Modularity Strategy
A Cost-Driven Method for Design
Optimization Using Validated Local
Domains
(2013-01-1164)
(2013-01-1385)
Michael LaLande, Dassault Systemes
8:40
a.m.
Dorin Drignei; Zissimos Mourelatos,
Vijitashwa Pandey, Oakland University;
Igor Baseski, US Army TARDEC; Michael
Kokkolaras, McGill University; Amandeep
Singh, David Lamb, US Army TARDEC
Virtual Road Approach for Vehicle
Durability Simulations
(2013-01-1165)
Abhijit Londhe, Suhas Kangde, Mahindra
& Mahindra Ltd
9:00
a.m.
Battery-Free AGVs: Scalable, Flexible,
Asynchronous Production
1:20
p.m.
Reliability-Based Design Optimization
with Model Bias and Data Uncertainty
(2013-01-1384)
Zhen Jiang, Wei Chen, Northwestern
University; Yan Fu, Ren-Jye Yang, Ford
Motor Company
(Oral Only)
Rod Emery, Superior Controls
9:20
a.m.
Cloud Computing OEE for Reducing
Production Downtime
(2013-01-1324)
1:40
p.m.
An Ensemble Approach for Model Bias
Prediction
(2013-01-1387)
Ravi Anand, SYBEQ
9:40
a.m.
How to Spread the Lean Mindset in an
Effective Way Using Change Agents in
Sales and Engineering and Finance at
Tenneco
Zhimin Xi, Univ. of Michigan; Yan Fu,
Ren-Jye Yang, Ford Motor Co
2:00
p.m.
On Stochastic Model Interpolation and
Extrapolation Methods for Vehicle Design
(2013-01-1386)
(2013-01-1326)
Zhenfei Zhan, Yan Fu, Ren-Jye Yang,
Ford Motor Co
Patrick Garcia, Enrique Orta, Tenneco
Europe
10:00
a.m.
Methodology Improvement for Lean
Transactional
2:20
p.m.
Robust Analytical Methodology for Hood
Overslam Travel using a DFSS Approach
(2013-01-1388)
(2013-01-1327)
Sankar Rao Nallapati, Jason Miller,
Balakrishna Chinta, John Morley, General
Motors Company
Patrick Garcia, Tenneco Europe
10:20
a.m.
Lean Implementation in Integrated
Design and Manufacturing
(2013-01-1329)
2:40
p.m.
Leaf Spring Safety and Ride Comfort
Circumstances Against Fatigue
Behaviour
Mohamed El-Sayed, Kettering University
10:40
a.m.
(2013-01-1383)
Critical Success Factors of Quality
Culture Development in Automotive
Industry
Murathan Soner, Ciler Senocak, Olgun
Celik; Tolga Erdogus, Olguncelik
Company; Mustafa Karaagac, Olgun
Celik; Ahmet Kanbolat, Olguncelik
Company; Gorkem Ozcelik, Olgun Celik;
Vural Ceyhun
(2013-01-1330)
Shady Baher El Safty, General Motors
International Operations
11:00
a.m.
Implementation of Lean in Human
Resources
(2013-01-1332)
Patrick Garcia, Tenneco Europe;
Wolfgang Fries, Tenneco International
Design Committee / Integrated Design
and Manufacturing Activity
Chairpersons:
Ching-Hung Chuang, Yan Fu, Ford
Motor Co
Planned by Lean - Six Sigma Committee
/ Integrated Design and Manufacturing
Activity
The papers in this session are available in
SAE Technical Paper Collection, COLLTP-00334, and also individually. To
85
Integrated Design &
Manufacturing
EXHIBITOR LIST
Applus IDIADA.....................................1019
BAND-IT..............................................1215
CD-adapco...........................................301
DG Technologies...................................814
dSpace Inc............................................401
Dynamic Intelligent Solutions...............714P
Emergent Systems..............................1312
Enercon Industries.................................501
Exco Engineering.................................1205
Grenzebach/Inos/LJU............................219
Granta Design.......................................419
Lacks Wheel Trim Systems....................325
Librestream Technologies......................321
Marsilli Group......................................1101
North Coast Industrial Imaging............326P
Proto Manufacturing Inc........................600
Realization Technology........................1136
Rescale.............................................1115P
Shenzhen Shunhe Electric
Technology Co...................................437
Siemens PLM Software.........................430
Software Cradle.....................................802
SpaceClaim Corporation.......................812
Stratasys...............................................915
SUHNER Manufacturing Inc................324P
Sungwoo Automotive Co Ltd..............1231
SuperiorControls.................................1306
Synergeering Group, LLC......................830
Texas Economic Development...............919
Zhejiang Shibao Holding Group...........1200
Considering IVHM? New must-have book explores
business implications and implementation
Edited by Ian K. Jennions
Following the best seller, Integrated Vehicle Health Management: Perspectives
on an Emerging Field, this book addresses the commercial justification for
the adoption of a new asset health management process, and its impact on
business strategy and servitization of technology. Highlights include:
•
•
•
•
How to calculate the return on investment of an IVHM system
How real options can be used for decision making
How the availability of prognostic information affects maintenance
The business potential of structural health monitoring in aeronautics
This book fills an important gap in knowledge by uniting the technical and business
aspects of a paradigm shift.
ISBN: 978-0-7680-7645-5
Product Code: R-414
List Price: $99.95
Order today!
Phone: 1-877-606-7323 (U.S. and Canada)
P121794
86
> BE AN AUTO INDUSTRY LEADER –
ENGAGE WITH ONE.
Discover SAE’s full menu of solutions that meet the needs of your organization, including …
• SAE’s Digital Library is the complete collection of automotive engineering information for
technology research worldwide, including standards, papers, scholarly journals, e-books and
other relevant industry publications.
Try it free for 2 weeks at saedigitallibrary.org.
• SAE Subscriptions are designed for companies, organizations, and individuals who routinely
need the most current information on key topics in mobility engineering.
For more details, visit: subscriptions.sae.org.
• SAE’s Global Technology Library – Electric Vehicle selects and aggregates both SAE and
valuable industry-partner content covering vehicle electrification and makes it available it to
your enterprise system in an online platform that enables you to browse, search and share
content quickly and easily.
Get a free 2-week trial at www.saegtl.org/ev.
Visit engineering.sae.org/autoindustryleaders for a complete list of products and to see why
auto industry leaders engage with SAE International.
1-888-875-3976
www.SAE.org
P135237
MANAGEMENT/MARKETPLACE
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
Automotive Engineering as a Degree (ABET100)
-
-
-
4
-
-
D3-20
90
Career Wise for Engineering Professionals: Transforming Your
Talents into the New World of Work (CONG101)
-
-
-
4
-
-
D3-26
90
Engineering Education (B600)
-
-
-
-
4
-
D3-26
91
4
4
-
-
-
-
D3-20
89
-
-
4
-
-
-
D0-07B
90
Mobility History Session (Part 1 & 2) (CONG100)
SAE / MIT Innovation Competition (IDM800)
4th Edition Just Released!
The Indispensable Guide to
Internal Combustion Engines
By Richard Stone
Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth
of worked examples and problems, this book provides a combination of theory
and applied practice to help you understand internal combustion engines, from
thermodynamics and combustion to fluid mechanics and materials science.
List Price: $81.00
ISBN: 978-0-7680-2084-7
Product Code: R-391
Join SAE and Save up to 20%* off
List Price on most products priced
under $500. Visit www.sae.org/
membership and start saving!
Discount is determined
by Member Level.
Topics include:
• Thermodynamic Principles
• Combustion and Fuels
• Spark Ignition Engines
This book is a valuable reference for both students and professional engineers
needing a practical overview of the subject.
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
88
• Induction and Exhaust Processes
• Turbocharging
• Experimental Facilities
P121850
TIME
TIME
D3-20
9:30
a.m.
D3-20
Mobility History Session (Part 1 of 2) (CONG100)
Mobility History Session (Part 2 of 2) (CONG100)
9:30 a.m. - 11:40 a.m.
1:00 p.m. - 4:00 p.m.
Vehicle Automation - Then and Now
1:00
p.m.
(Oral Only)
Colin Chapman - Inside the Innovator
Jim Cowart, US Naval Academy
2:00
p.m.
(Oral Only)
History of Chrysler Engineering - The First 25 Years
(Oral Only)
Karl Ludvigsen, Ludvigsen Partners
Planned by Mobility History Committee / Office of the Secretary
The Model T Engine
(Oral Only)
Robert Neff, Sales and Marketing Insight
10:30
a.m.
Al Bosley, Barbara M. Fronczak, Chrysler Corporation
3:00
p.m.
Desmodromic Valvetrains
(Oral Only)
Jeremy Goddard, IDIADA Automotive Technology
Planned by Mobility History Committee / Office of the Secretary
Standards matter.
And so do you.
Standards are published documents that set out specifications and
procedures to ensure products and systems are safe, reliable, and
consistently perform the way they were intended. They serve to
protect… support innovation…boost production and productivity…
make businesses more competitive…link businesses to the world…
complement regulation and make markets work better….and, reward
individual participants personally and professionally.
Standards matter—and so does the ongoing need for involvement from
people like you to participate in the development of these technical
documents for the aerospace and ground vehicle industries.
For the important work of standards, SAE International and the
mobility industry is currently in need of volunteers with the technical
expertise to participate on the following standards development
committees. If you possess the technical knowledge as related to
these committees, we urge you to contact us. Because standards
matter and so do you.
Learn more, express interest at + 1.724.772.7161 or
http://www.sae.org/standardsdev/participationReq.htm
P130052
SAE International Ground
Vehicle Standards Development
Committees currently seeking
your technical expertise.
• SAE Chassis Controls Committee
• SAE Truck & Bus Active Safety
Systems Committee
• Also looking for experts involved
in Vehicle Connectivity; Electric
Vehicles; Automated Vehicles;
and Safety/Human Factors (i.e.,
Driver Vehicle Interface, HMI,
Collision Avoidance). For specific
opportunities related to these areas
contact SAE.
The society dedicated to advancing mobility
engineering worldwide.
89
TIME
D0-07B
SAE / MIT Innovation Competition (IDM800)
The goal of the competition is to provide ideas for the vehicle industry
when it faces tremendous challenges by innovative start ups. Sponsored
General Motors and by EmiSense. the following a series of presentations
from past start up competitors, each company will present their technology
and a compelling reason for development. Judging will follow and cash and
“in kind” prizes to be awarded. This will be preceeded by several success
stories from previous competitors.
8:20 a.m. - 11:40 a.m.
Organizers:
David Stout, David B Stout Associates LLC; Dennis Nash, MIT Enterprise
Forum Great Lakes Region
8:20
a.m.
Keynote Speaker: The Long and Winding Road of New Technology
Adoption in the Automotive Industry
(Oral Only)
Patrick Thompson, EmiSense
9:00
a.m.
Component Dimensional Stability During Extreme Climatic Testing
(Oral Only)
Phillip Lewis, Dynamic Intelligent Solutions
9:20
a.m.
TIME
D3-20
D3-26
Automotive Engineering as a
Degree (ABET100)
Career Wise for Engineering
Professionals: Transforming Your
Talents into the New World of
Work (CONG101)
This is a panel discussion on the
development of Automotive Engineering
as a separate curriculum within university
engineering programs. The speakers will
consider the need for such programs from
the perspective of universities and the
mobility industry.
Career development is no longer something
you focus on in your twenties and are set
for life, it is ongoing and constant. New
technologies, globalization and the worldwide competition for jobs demand that we
continue to grow our skills and knowledge
throughout our life. This session will
provide you with tools to help you meet this
demand as an engineering professional.
Participants will create a personal mission
statement and set career goals, identify the
best way to research new opportuni ******
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Thomas E. Kenney
Organizers:
Martha Schanno, SAE International
Panelists:
Imtiaz Haque, CU-ICAR
Peter Hylton, Indiana Univ. Purdue Univ.
Indianapolis
Cem Sorusbay, Istanbul Technical
University
Giorgio Rizzoni, The Ohio State Univ.
Robert L. Woods, Univ. of Texas at
Arlington
Sam Hamade, Ford Motor Co.
Panelists:
Caryn Mateer, Kathleen Riley,
Transformational Leaders Intl.
Opening Remarks
(Oral Only)
8:40
a.m.
Judges Introduction and Explanation of Competition Rules
(Oral Only)
David Stout, David B Stout Associates LLC
9:40
a.m.
Innovation IT Network
(Oral Only)
Vivek V. Havele, CAE Technology Inc.
10:00
a.m.
Adaptive Tunable Antenna Architecture for Mobile Applications
(Oral Only)
Randy Dence, Monarch Antenna
10:20
a.m.
Omnidirectional, RF Navigates, Autonomous Guided Vehicles for
Manufacturing and Warehousing
(Oral Only)
SAE 2013 Heavy Duty
Vehicles Symposium
Technologies for High Efficiency
& Fuel Economy
Paul Fleck, OmnicO AGV Inc.
10:40
a.m.
Thermal Sensing Process Control
(Oral Only)
Barry Sutherland, North Coast Industrial Imaging
11:00
a.m.
Bio-Based Automotive Plastics Using Lignin Based Polyurethane
(Oral Only)
Ken R. Kurple, BluWater Bio Productions
11:20
a.m.
Judges Comments and Award Presentation
(Oral Only)
90
September 29–30, 2013
Rosemont, Illinois, USA
TIME
D3-26
Engineering Education (B600)
There has never been a time when the demand for engineers has been greater. The skills
shortage has afflicted the Auto sectors in particular, but no branch of engineering has been
untouched. With the demand for engineering skills in general comes a specific requirement for
skills in systems, electronics, power management and new design methods and processes.
8:00 a.m. - 11:40 a.m.
Organizers:
Richard K. Stobart, Loughborough Univ.; Massoud Tavakoli
8:00
a.m.
Evaluation of an Automotive Simulator Based Driver Safety Training Program for Run-Off-theRoad and Recovery
(2013-01-1260)
Paul Freeman, Sameer Samant, John R. Wagner, Kim Alexander, Philip Pidgeon, Clemson
University
8:20
a.m.
How can AWIM become a Global Enterprise?
(Oral Only)
Christopher M. Ciuca, SAE International
8:40
a.m.
What is the future for Collegiate Design Competitions in a Multi-Discipline, Diverse World?
(Oral Only)
Peter D. Jones, Auburn Univ.
9:00
a.m.
From Graduation to Profession - Can We Go Faster?
(Oral Only)
Jo Lopes, Jaguar Cars
9:20
a.m.
Panel Discussion
Technical Session Oral
Evaluation Incentives
In an effort to collect more evaluation
ratings for the technical session
speakers, SAE will be holding daily
drawings for anyone who completes
an oral evaluation card distributed
in technical session rooms. Simply
complete the card, tear off the
perforation with your name and contact
number, and turn it in to the session
moderator. Six (6) winners will be
announced daily to receive prizes.
Winners will be announced daily and
posted in the technology lounges.
Planned by Faculty Advisors Committee / Education Board; Automobile Body Activity / EMB
Land and Sea Group
...
SAE International would like to acknowledge those
organizations that have funded the 2012 Ground
Vehicle Standards Development Program.
American Honda Motor Co. Inc.
AM General LLC
Association of Equipment
Manufacturers
Bendix Commercial Vehicle
Systems LLC
BMW of North America LLC
BorgWarner Inc.
Cequent
Coleman Cable Inc.
Chrysler Group LLC
Curt Manufacturing
Delphi Corp.
DENSO International America Inc.
East Penn Mfg. Co. Inc.
Eaton Corp.
Electric Power Research Institute
Electronics Inc.
Elite Electronic Engineering Inc.
Ford Motor Co.
General Motors LLC
Grote Industries LLC
L E Jones Co.
Navistar Inc.
Nissan
Sew Eurodrive
TARDEC
Toyota Motor Corp.
Transportation Safety Tech Inc.
Yamaha Motor Corp. USA
Support standards. Standards enable industry to produce vehicles with optimal quality, safety and efficiency.
For more information contact Mary Doyle [email protected]
P130150
91
management &
marketplace
EXHIBITOR LIST
KOTRA, AIN Global..........................M1331
exchange of ideas. Remarks made by participants
or members of the audience cannot be quoted
or attributed to the individual or their company
unless express permission has been granted by
the individual and their company. Any record of
remarks, discussion, or photographs may not be
used unless express permission has been granted
by the individual and their company.
Enhance Performance and Increase Quality
Market Research Reports
the latest global strategies, technology drivers, and market
intelligence developed by market-leading experts specifically for SAE.
Includes publications from:
- SupplierBusiness
- About Publishing
Multi-user packages and subscription bundles are available.
For more information including the
Table of Contents for available titles visit
sae.org/market-research
P135212
92
The
Propulsion Evolution
SAE J1772 ™
EV Conductive
Charge Coupler
Helping make electromobility a global reality.
Standards & Resources from SAE International
Many say the automotive industry could well
be standing before a paradigm shift with
respect to propulsion. If so, a future that uses
environmentally friendly motors partially or
entirely powered by electricity represents one of
the most challenging and profound technological
transformations of our time.
Charging, Batteries, Interoperability
•
•
•
Safety
•
•
•
In the 1900’s, early automobile manufacturers came
to SAE to freely exchange ideas and expand their
knowledge on the “new form of transportation”
at that time. It was the go-to forum for solving
common design challenges, reducing costs and
increasing safety, reliability, and comfort of the
“horseless carriage.”
•
•
•
SAE J2847/3 ™ Communication between Plug-in
Vehicles and the Utility Grid for Reverse Power Flow
Electric Vehicle Technology-Smart Grid & Infrastracture
2011 SAE Technical Paper Collection
Braking for Electric/Hybrid Vehicles; session, SAE 2012
Brake Colloquium & Exhibition
Advanced Vehicle Drivetrains & Engines
•
•
•
SAE J1711™ Recommended Practice for Measuring
the Exhaust Emissions & Fuel Economy of Hybrid-Electric
Vehicles; Including Plug-in Hybrid Vehicles
Modern Electric, Hybrid Electric, and Fuel Cell Vehicles
Book
SAE Competition for the Transmission of the Future
Symposium
Electric, Fuel Cell, & Hybrid Vehicles
SAE: Advancing the Advanced Vehicle
• Lead standards development organization by the Smart Grid
Interoperability Panel
•
•
•
• SmartGrid standards harmonization activities with ISO, IEC, utilities, IEEE,
EPRI, ZigBee Alliance, & HomePlug Power Alliance
• 29 standards development committees and 774 members involved in
Vehicle Electrification
SAE J2344 ™ Guidelines for Electric Vehicle Safety
Fire Safety; 2007 and 2008 Book
Basic Hybrid and Electric Vehicle Safety Webinar
Smart Grid, Energy Conversion/
Consumption, Energy Sources
Today, as then, SAE is at the forefront of advancing
new forms of transportation by addressing the
challenges associated with vehicle electrification
and connectivity through its global, market-driven,
voluntary consensus standards program and its
library of mobility engineering information -- the
largest of its kind.
• Rechargeable Energy Storage System (RESS) safety efforts through US
DoT’s NHSTA cooperative research project
SAE J2954 ™ Wireless Charging of Electric and Plug-in
Hybrid Vehicles
HEV and EV Battery Technology SAE Standards
Subscription
SAE Convergence ®, The premier transportation
electronics event
■
■
Alternative Cars in the 21st Century, Second Edition-A
New Personal Transportation Paradigm
Vehicle Electrification—SAE Online Magazine evsae.com
SAE Electric Vehicle / Hybrid Vehicle Technologies
Symposia
New, Vehicle Electrification Professional Certification
NEW! The SAE Global Technology Library–Electric Vehicle
http://saegtl.org/ev/
• 260 representatives from 150 organizations participate on the SAE
Battery Standards Steering Committee
P130054
Find these and much more at engineering.sae.org/2013electromobility
MATERIALS
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
-
-
4
4
-
-
D0-06A
101, 102,
104, 105
4
4
-
-
-
-
D0-03A
96, 97
Advances in Bar Steel and Heat Treatment Technology (M209)
-
-
4
-
-
-
D0-03A
103
Advances in Coating (M302)
-
-
-
4
-
-
D0-03B
104, 105
Advances in Instrument Panels, Seats and Interiors (M300)
-
-
4
-
-
-
D0-03B
101, 102
Advances in Plastic Components, Processes and Technologies
(M301)
-
-
-
-
-
4
D0-03B
110, 111
Applications of Advanced High-Strength Steels and Press
Hardening for Automotive Structures (M202)
-
-
4
-
-
-
D0-03A
101, 102
Automotive Composites (M303)
-
-
-
-
4
-
D0-03B
107, 108
Automotive Engineering Testing and Test Methods (M104)
-
-
-
-
-
4
D0-07A
110, 111
Automotive Tribology - Modeling and Testing (Part 1 & 2) (M111)
-
-
-
-
4
4
D0-06A
107, 108,
110, 111
CAE Analysis and Application: Multi-Discipline Interaction (M110)
-
-
4
-
-
-
D0-05B
101, 102
CAE Durability Analysis and Applications (Part 1): Fatigue Theory
and Methodology Development (M109)
-
-
-
4
-
-
D0-05B
104, 105
CAE Durability Analysis and Applications (Part 2 A): Applications to
Automotive Engineering (M109)
-
-
-
-
4
-
D0-05B
107, 108
CAE Durability Analysis and Applications (Part 2 B): Applications to
-
-
-
-
-
4
D0-05B
110, 111
Casting Materials (M204)
-
-
4
-
-
-
D0-06B
103
Fatigue Research and Applications (M200)
-
4
-
-
-
-
D0-03B
97, 98, 99
Load Simulation and Vehicle Performance (Part 1): Tire and Terrain
(M107)
-
-
-
4
-
-
D0-05A
104
Load Simulation and Vehicle Performance (Part 2): Multi-Body
Dynamics (M107)
-
-
4
-
-
-
D0-05A
103
4
-
-
-
-
-
D0-05A
96
Load Simulation and Vehicle Performance (Part 4): Ride Comfort
(M107)
-
-
-
-
4
-
D0-05A
107, 108
Load Simulation and Vehicle Performance (Part 5): Handling and
Dynamics Control (M107)
-
4
-
-
-
-
D0-05A
97, 98, 99
Magnesium Technologies (M205)
-
-
-
4
-
-
D0-03A
106
4
-
-
-
-
-
D0-05B
96
NVH CAE Analysis and Application (M108)
-
4
4
D0-05B
97, 98, 99
Optical Measurement and Nondestructive Testing Techniques in
-
Advanced Analysis, Design, and Optimization of Materials,
Restraints, and Structures for Enhanced Automotive Safety and
Weight Reduction (Part 1 & 2) (M103)
Advances In Light Weight Materials - Aluminum (Part 1 & 2) (M203)
Load Simulation and Vehicle Performance (Part 3): Nonlinear
Components/System (M107)
Materials and Residual Stress Testing Development (M106)
Panel Discussion: Measurement and Analysis of Forming Limit
Diagrams Using DIC Techniques (Part 2 of 2) (M201)
Sheet / Hydro / Gas Forming Technology and Modeling (Part 1 of
2) (M201)
94
-
-
-
-
-
-
-
-
4
D0-05A
112
-
4
D0-03
C&D
112
D0-03
C&D
109
4
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
-
-
-
4
-
-
D0-03A
106
Structural Plastic Composite Components - The Multi-Material
Vehicle Opportunity and Technology Gaps: Evolution or
Revolution? (Part 1) (M304)
4
-
-
-
-
-
D0-03
C&D
96
Structural Plastic Composite Components - The Multi-Material
Vehicle Opportunity and Technology Gaps: Evolution or
-
4
-
-
-
-
D0-03
C&D
100
Welding and Joining and Fastening (M102)
-
4
-
-
-
-
D0-06A
100
Specialty Alloys (M208)
SAE 2013
COUNTERFEIT PARTS
AVOIDANCE
SYMPOSIUM
September 27, 2013
Montreal, Canada
www.sae.org/events/cpas
P135083
95
MATERIALS
Tues
MATERIALS
TIME
D0-03A
9:30
a.m.
9:50
a.m.
10:10
a.m.
10:30
a.m.
D0-05A
D0-05B
D0-03 C&D
Advances In Light Weight
Materials - Aluminum (Part 1 of
2) (M203)
Load Simulation and Vehicle
Performance (Part 3): Nonlinear
Components/System (M107)
Materials and Residual Stress
Testing Development (M106)
Structural Plastic Composite
Components - The MultiMaterial Vehicle Opportunity and
Technology Gaps: Evolution or
This session presents the latest
developments in automotive applications
of aluminum castings and wrought
products. The papers cover a wdie range
of the technical aspects including alloy
development, lightweight design, process
development and simulation as well as
performance optimization.
Focusing on new theory, formulation
and modeling of amplitude-, frequencyand temperature-dependent nonlinear
components/systems such as rubber
and hydraulic mounts or bushings, shock
absorbers, and any joint friction/damping;
dynamic characterization through lab and
field testing; Linearization methodology;
Model validation, application, and sensitivity
analysis in vehicle system/subsystem
simulations; Nonlinear system identification,
modeling, and application in testing
accuracy improvement; ******
Key words: residual stress, retained
austenite, x-ray diffraction, neutron
diffraction, induction hardening, carburizing,
shot peening, quench and template
For 30 years industry has been working
to develop a multi-material vehicle where
steel, aluminum , polymer composites,
and Magnesium can all be utilized to
optimize the vehicle structure and where
materials can be used selectively where
appropriate. Such a vehicle remains
elusive for reasons of cost and material
compatibility. This session will discuss the
technology gaps and what is required to
for the implementation of and successful
production of a high volume multi- materials
vehicle.
9:30 a.m. - 10:50 a.m.
9:30 a.m. - 11:50 a.m.
9:30 a.m. - 10:50 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Jidong Kang, CanmetMATERIALS; Alan
Luo, General Motors Corporation; Douglas
Richman, Kaiser Aluminum
Organizers:
Ken Kang, Honda R&D Americas Inc.;
Peijun Xu, Ebco Inc.; Fulun Yang, Tenneco
Inc.
Organizers:
Gerald A. Shulke, Xichen Sun, Chrysler
Group LLC; Xin Zhang, Ftech R&D North
America
Organizers:
Marianne S. Morgan, BASF Corp.
A Cell Geometrical Model to Numerically
Study Fluid Flow in Metal Foam
Keynote: Energy Harvesting Shock
Absorbers: Power Assessment,
Mechatronic Design, and Vehicle Dynamics
Microstructure and Sintering Mechanism of
C/Cu Composites by Mechanical Alloying/
Spark Plasma Sintering
Keynote: Plastic Fantastic: A History of
Automotive Composite Material Applications
(Oral Only)
(Oral Only)
(Oral Only)
(Oral Only)
Ahmed Suleiman, NIhad Dukhan, University
Of Detroit Mercy
Lei Zuo, State Univ. of New York College
Xu Ran, Changchun University
Lindsay Brooke, Sr Editor, Automotive
Engineering Intl, SAE International
Development of Aluminum-Clad Material for
Corrosion Resistance Cooler
Analysis of Residual Strain Profiles in
Distorted Aluminum Engine Blocks by
Neutron Diffraction
(2013-01-0380)
(2013-01-0171)
Kazutaka Ohno, Yoshiki Tomita, Eisuke Yagi,
Hirofumi Nakano, Toyota
Anthony Lombardi, Comondore (Ravi)
Ravindran, Ryerson University; Dimitry
Sediako, National Research Council
Canada; Robert Mackay, Nemak of Canada
Dry Sliding Wear Behavior of Al-B4C
Particulate Reinforced Composites
Produced by Powder Metallurgy Method
Assessment of Vehicle Performances with
Energy-Harvesting Shock Absorbers
Mapping Residual Stress Distributions in
Advanced High Strength Steel Automotive
Body Panels and Structural Components
Materials Considerations and Technology
Gaps for Polymer-based Composites
(2013-01-0379)
(2013-01-0170)
(2013-01-0172)
(Oral Only)
Feray Guleryuz, Ege Universitesi; Deniz
Uzunsoy, Bursa Teknik &Yildiz Teknik
Universitesi; Rasim Ipek, EGE Universitesi
Peng Li, Lei Zuo, State Univ. of New York at
Stony Brook
Jeffrey Nantais, Proto Manufacturing Ltd.;
James Pineault, Mohammed Belassel,
Michael Brauss, Proto Manufacturing Inc
Saad Abouzahr, Chrysler Corp.
Selecting Paint Stripping Technologies
for Aluminum Wheels, a Comprehensive
Comparison of Commercially Available
Methods
Shape Recovery Simulation of Flexible
Airdam
Comparison of Austempering and Quenchand-Tempering Processes for Carburized
Automotive Steels
The Challenge in Expanding Composite use
in Multi Material Body Structure
(2013-01-0385)
(2013-01-0166)
(2013-01-0173)
(Oral Only)
Agnes Rousseau, Christopher Ringholz,
Tom Patena, John Kochilla, Atotech
Mohammed Billal K, Chrysler India
Automotive Pvt Ltd; Neill Quinlan, Chrysler
Technology Center; Xiaoyan (Susan) Qu,
Chrysler Group LLC
Andrew D. Clark, Derek O. Northwood,
Randy J. Bowers, University of Windsor;
Xichen Sun, Peter Bauerle, Chrysler Group
LLC
Michael S. Wiseman, Honda R & D
Americas Inc.
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Planned by Polymers and Coatings
10:50
a.m.
Modeling and Simulation of Creep-FatigueOxidation Crack Growth
(2013-01-0167)
Fulun Yang, Tenneco Inc
11:10
a.m.
Physical Modeling and Simulation Analysis
of an Advanced Automotive Racing Shock
Absorber using the 1D Simulation Tool
AMESim
(2013-01-0168)
Maryam Sadeghi Reineh, Linköping
University, Automatic Control; Matteo
Pelosi, Öhlins Racing AB
11:30
a.m.
Dynamic Simulation under Intermediate
Strain Rates of Mechanical Components
Made of an Elastomeric Matrix and a Metal
Reinforcement
(2013-01-0169)
Andres Ramirez, Luis Munoz, Universidad
de los Andes
Planned by Non-Ferrous Committee /
Materials Engineering Activity
96
MATERIALS
TIME
D0-03A
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
D0-03B
D0-05A
D0-05B
2) (M203)
Fatigue Research and
Applications (M200)
Performance (Part 5): Handling
and Dynamics Control (M107)
NVH CAE Analysis and
Application (M108)
This session covers recent fatigue research,
analysis, analytical tools development, and
novel applications of fatigue technology in
the ground vehicle industry.
Focusing on studies of vehicle dynamics
performance including handling / stability
/ braking / traction characteristics, active
safety and operational robustness under the
influence of loading, tire forces and other
variants; correlation of analyses, simulations,
objective measurements and subjective
judgments; intelligent tire technology and
applications; chassis controls and control
system cooperation; impact of system
hybridization and electrification on vehicle
dynamics and controls.
Key words: NVH, acoustics, numerical
methods, test correlation, sound quality
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
John J. Bonnen, Carlos Engler-Pinto, Ford
Motor Co.; Jackie D. Rehkopf, Plasan
Carbon Composites
Organizers:
Dongpu Cao, Lancaster University; Jianmin
Gu, Changan Automobile Co., Ltd.
Organizers:
Kuang-Jen Liu, Chrysler Group LLC;
Luohui Long, Ford Motor Co.; Nammalwar
Purushothaman, BAE Systems; Guangtian
Gavin Song, AM General LLC; Weiguo
Zhang, Chrysler LLC
Non-Isothermal Material Deformation during
Heated Blank - Cold Die (HB-CD) Sheet
Stamping: Preliminary Study
Keynote: Derivation of Effective StrainLife Data, Crack Closure Parameters and
Effective Crack Growth Data from Smooth
Specimen Fatigue Tests
Impact of Driver’s Steer Control on TruckTrailer Combination when Negotiating NATO
Double Lane Change Maneuver
Understanding the Difficulties and
Challenges in Vehicle NVH Analysis and
Design
(Oral Only)
(2013-01-1779)
(2013-01-0404)
(Oral Only)
Fadi Abu-Farha, Clemson University; Nan
Zhang, Clemson Univeristy
Maria El-Zeghayar, Tim Topper, University of
Waterloo; John J. Bonnen, Ford Motor Co.
Xiaobo Yang, Oshkosh Corporation
Wen Li, Wayne State Univ.
Evaluation of Constitutive Behavior of
Aluminum Extrusions and Their GMAW
Welds
Fault Tolerant Control Against Actuator
Failures of 4WID/4WIS Electric Vehicles
(2013-01-0384)
(2013-01-0405)
Jidong Kang, CanmetMATERIALS; Kevin
gong, Constellium; Guowu Shen, Jie Liang,
James Chen, CanmetMATERIALS
Changfu Zong, Chao Liu, Hongyu Zheng,
Jie Liu, Jilin University
Safe & Cost-Effective Path to Fuel Targets
with Aluminum
A Fuzzy Logic Yaw Control Study with
Human in the Loop Simulation
Reducing Radiated Structural Noise
from AIS Surfaces using Several FEM
Optimization Methods
(Oral Only)
(2013-01-0406)
(2013-01-0997)
Randall Scheps, Alcoa Automotive
Erdem Uzunsoy, Bursa Teknik & YildizTeknik
Universitesi
John A. White Jr., Mac Lynch, Chrysler
Group LLC
Lightweighting Impacts on Fuel Economy,
Cost, and Component Losses
Stress Intensity Factor Based Spot Welds
Fatigue Life Prediction Model
Potential for Passenger Car Energy
Recovery through the Use of Kinetic Energy
Recovery Systems (KERS)
Efficient and Accurate Evaluation and
Improvement of Engine Radiated Noise
(2013-01-0381)
(2013-01-0389)
(2013-01-0407)
(2013-01-1005)
Aaron David Brooker, National Renewable
Energy Laboratory; Jacob Ward,
Department Of Energy; Lijuan Wang,
Yandong Shi, Haiding Guo, Nanjing Univ.of
Aeronau. & Astronau.
L. Daniel Metz, Metz Engineering & Racing,
LLC
Renhua Feng, Hunan University, Changsha,
China; Daming Zhang, California State
University, Fresno; Jingping Liu, Jianqin
FU, BangLin DENG, Hunan University,
Changsha, China
Structure to Assist in Prevention of
Bimetallic Corrosion of Hybrid Doors
Failure Mechanisms and Damage Model of
Ductile Cast Iron under Low-Cycle Fatigue
Conditions
Estimating Path Clearing Effects during
Potential Hydroplaning through the Use of
Vehicle CAN Bus Data
CFD/CAE Combinations in Open Cavity
Noise Predictions for Real Vehicle Sunroof
Buffeting
(2013-01-0386)
(2013-01-0391)
(2013-01-0408)
(2013-01-1012)
Shoji Kimura, Honda R&D Co., Ltd.
Xijia Wu, National Research Council
Canada; Tony Quan, Clayton Sloss,
Wescast Industries Inc
L. D. Metz, Metz Engineering & Racing;
Duane R. Meyers, Wisconsin State Patrol
Fred G. Mendonca, CD-adapco
Low-Cycle and Thermo-Mechanical Fatigue
and Nodular Cast Iron for High Temperature
Applications
Preview based Vehicle Steering Control
using Neural Networks
A Practical Procedure to Predict AIS Inlet
Noise Using CAE Simulation Tools
(Oral Only)
(2013-01-0409)
(2013-01-1004)
Carlos Engler-Pinto, Ford Motor Co.
Saurav Talukdar, Indian Institute of
Technology Bombay; Muhammad Adeel
Awan, Cranfield University; Anthony
Tremlett; Venkat Sastry, Defence Education;
David Purdy, Cranfield University
Weiguo Zhang, Brian Butler, Mark Likich,
Mac Lynch, Chrysler Group LLC
Investigation of Thermal Fatigue Evaluation
Method for Cast Iron
Vehicle Powertrain Test Bench CoSimulation with a Moving Base Simulator
Using a Pedal Robot
Leaf Spring Design Considering Natural
Frequency Calculations Based On NVH
(2013-01-0393)
(2013-01-0410)
(2013-01-1000)
Yutaka Sasaki, Noriaki Katori, Hino Motors,
Ltd.
Anders Andersson, VTI; Peter Nyberg,
Murathan Soner, Gorkem Ozcelik, Ciler
Linköping University; Håkan Sehammar, VTI; Senocak, Seray Goksel Tokgonul, Tolga
Per Öberg, Linköping University
Erdogus, Mustafa Karaagac, Ahmet
Kanbolat, Olguncelik
97
MATERIALS
TIME
D0-03A
D0-03B
D0-05A
D0-05B
2) (M203)
Applications (M200)
Application (M108)
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
Carbon Composites
Organizers:
Organizers:
Zhang, Chrysler LLC
Decarburization Effects on Fatigue Behavior
of Leaf Spring Material
Study on Braking Force Distribution
Algorithm for Hybrid Electric Bus Based
on EBS
HVAC Blower Aeroacoustic Predictions
(2013-01-0392)
(2013-01-0411)
(2013-01-1001)
Mustafa Karaagac, Murathan Soner, Olgun
Celik; Alper Togay; Aylin Keskin, Selcuk
Yildiz, OLGUNCELIK; Erdoğan Tekin, ATILIM
UNIVERSITY; Ahmet Kanbolat, Olguncelik
Company
Rong He, Hongyu Zheng, Changfu Zong,
Jilin Univ.
Koji Norisada, Masaharu Sakai, Syunsuke
Ishiguro, DENSO Corp.; Masami
Kawaguchi, DENSO Technology Co., Ltd.;
Franck Perot, Exa Corporation; Koichi
Wada, EXA Japan Inc.
3:20
p.m.
3:40
p.m.
Commercial Vehicle NVH Refinement
through Test-CAE Development Approach
(2013-01-1006)
Vijay Antony John Britto, Sadasivam
Sivasankaran, Ekambaram Loganathan,
Saisankaranarayana Kupplili
Saisankaranarayana, Ashok Leyland Ltd;
Kalyankumar Sidram Hatti, Ashok Leyland
Technical Center
4:00
p.m.
Joint Modeling Issues in Simplified BeamPlate Body Analysis
(Oral Only)
Soomin Choi, Seoul National Univ; Jang
Gang-Won, Sejong University; Yoon Young
Kim, Seoul National Univ
10:01
p.m.
10:02
p.m.
Accelerated Testing for Design Verification
and Improvement of Powertrain Mounting
Structure (Written Only -- No Oral
Presentation)
Optimization of Braking Force Distribution
for Three-Axle Truck (Written Only -- No Oral
Presentation)
Aerodynamic Noise Source Identification
for a Coupe Passenger Car by Numerical
Method Focusing on the Effect of the
Rear Spoiler (Written Only -- No Oral
Presentation)
(2013-01-0395)
(2013-01-0414)
(2013-01-1013)
Zhengzhong Wang, Wei Ma, Yiheng Wang,
Xiaolei Wang, Jianchao Cheng, Chery
Automobile Co., Ltd
Gang Tang, Han Zhao, Hefei University of
Technology; Jinglai Wu, Yunqing Zhang,
Huazhong University of Science and Tech.
Sajjad Beigmoradi, Kambiz Jahani, Arash
Keshavarz, Mohsen Bayani Khaknejad, CAE
Engineer, R&D Center of SAIPA
Robust Design for Vehicle Ride Comfort and
Handling with Multi-Objective Evolutionary
Algorithm (Written Only -- No Oral
Presentation)
(2013-01-0415)
Yong Luo, Jinglai Wu, Wenkui Fu, Yunqing
Zhang, Huazhong University of Science
and Tech.
10:03
p.m.
Variable Yaw Rate Gain for Vehicle Steer-bywire with Joystick (Written Only -- No Oral
Presentation)
(2013-01-0413)
Hongyu Zheng, Changfu Zong, Jilin Univ.
10:04
p.m.
A Model-Based Mass Estimation and
Optimal Braking Force Distribution
Algorithm of Tractor and Semi-Trailer
Combination (Written Only -- No Oral
Presentation)
(2013-01-0418)
Zongyu Liu, Hongyu Zheng, Wenkai Xu, Jilin
University
98
MATERIALS
TIME
D0-03A
D0-03B
D0-05A
D0-05B
2) (M203)
Applications (M200)
Application (M108)
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
Carbon Composites
Organizers:
Organizers:
Zhang, Chrysler LLC
10:05
p.m.
Mass Estimation and Axle Load Distribution
Algorithm for EBS of Large Bus (Written
(2013-01-0417)
Zhigen Nie, Changfu Zong, Ying Wan, Jilin
Univ
10:06
p.m.
Development of an ESP Control Logic
Based on Force Measurements Provided
by Smart Tires (Written Only -- No Oral
Presentation)
(2013-01-0416)
Edoardo Sabbioni, Federico Cheli, Stefano
Melzi, Politecnico di Milano
10:07
p.m.
The Regenerative Braking Control Strategy
of Four-Wheel-Drive Electric Vehicle Based
on Power Generation Efficiency of Motors
(2013-01-0412)
Wenkai Xu, Hongyu Zheng, Zongyu Liu,
Jilin Univ
Planned by Ferrous Committee / Materials
Engineering Activity
99
MATERIALS
TIME
D0-03 C&D
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
3:20
p.m.
D0-06A
Structural Plastic Composite Components The Multi-Material Vehicle Opportunity and
Technology Gaps: Evolution or Revolution?
(Part 2) (M304)
Welding and Joining and Fastening (M102)
For 30 years industry has been working to develop a
multi-material vehicle where steel, aluminum , polymer
composites, and Magnesium can all be utilized to optimize
the vehicle structure and where materials can be used
selectively where appropriate. Such a vehicle remains
elusive for reasons of cost and material compatibility.
This session will discuss the technology gaps and what
is required to for the implementation of and successful
production of a high volume multi- materials vehicle.
Key words: welding, joining, fastening
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:20 p.m.
Organizers:
Organizers:
Jwo Pan, Univ. of Michigan-Ann Arbor; Michael Santella; Tau
Tyan, Ford Motor Co.
Automotive Composities: Evolution or Revolution in
Materials Joining
An Online Resistance Spot Weld Quality Monitoring System
(Oral Only)
(Oral Only)
George Ritter, EWI
Jian Chen, Wei Zhang, Zhili Feng, Oak Ridge National
Laboratory
Challenges and Chances for Manufacturing of Composites
for High Volume Applications
Failure Mode and Fatigue Behavior of Friction Stir Spot
Welds in Lap-Shear Specimens of Dissimilar Advanced High
Strength Steels
(Oral Only)
(2013-01-1023)
Tobias Potyra, Fraunhofer Project Center, Western Univ;
Paul Dugsin, Magnus Associates
Seung Hoon Hong, Katherine Avery, Jwo Pan, Univ of
Michigan-Ann Arbor; Michael Santella, Zhili Feng, Tsung-Yu
Pan, Oak Ridge National Laboratory
Mixed Materials: Taking on the Heavyweights
Study for Flashes of Friction Stir Spot Welds
(Oral Only)
(Oral Only)
Jay Baron, Car Group
Pai-Chen Lin, National Chung Cheng Univ.; Zheng-Ming Su;
Tseng Wei
Composite Lightweighting Solutions for Today, Tomorrow
and the Day After That
Failure Mode and Fatigue Behavior of Ultrasonic Spot Welds
with Adhesive in Lap-Shear Specimens of Magnesium and
Steel Sheets
(Oral Only)
(2013-01-1020)
Wei-Jen Lai, Jwo Pan, Univ of Michigan-Ann Arbor; Zhili
Feng, Michael Santella, Tsung-Yu Pan, Oak Ridge National
Laboratory
Leveraging Aerospace Composites CAE methods for
Composites in Automotive design – Opportunities and Gaps
Corrosion Behavior of Mixed-Metal Joint of Magnesium
to Mild Steel by Ultrasonic Spot Welding with and without
Adhesives
(Oral Only)
(2013-01-1017)
Giuseppe Resta, Altair Engineering
Tsung-Yu Pan, Zhili Feng, Oak Ridge National Laboratory;
Michael Santella, Consultant; Jian Chen, Oak Ridge National
Laboratory
Structural Navigation: Optimizing Automotive Materials
Selection
Fatigue Behavior of Self-Piercing Rivets and Clinch Joints in
Lap-Shear Specimens of Aluminum Sheets
(Oral Only)
(2013-01-1024)
Ross Kozarsky, LUX Research
Pai-Chen Lin, Zheng-Ming Su, National Chung Cheng Univ.;
Wei-Jen Lai, Jwo Pan, Univ of Michigan-Ann Arbor
Kick-starting Widespread Adoption of Automotive Carbon
Fiber Composites
Key Factors to Manage Filler Metal Creation on Aluminum
Heat Exchangers
(Oral Only)
(2013-01-1018)
Robert Hutch Hutchinson, Rocky Mountain Institute
Laurent Pasquet, Damien Bergès, Philippe DA SILVA, Claire
Demarcq, Valeo Thermal Systems
An Opportunity for Plastics and a Seismic Industry Change
(Oral Only)
Oliver Kuttner, Edison2
3:40
p.m.
Expert Panel Discussion: Structural Plastic Composite
Components - The Multi-Material Vehicle Opportunity and
Technology Gaps: Evolution or Revolution?
Moderators:
Brett Smith, Center For Automotive Research
Planned by Polymers and Coatings Committee / Materials
100
Planned by Materials Modeling and Testing Committee /
TIME
D0-06A
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
D0-03B
D0-03A
D0-05B
Advanced Analysis, Design,
and Optimization of Materials,
Restraints, and Structures for
Enhanced Automotive Safety and
Weight Reduction (Part 1) (M103)
Advances in Instrument Panels,
Seats and Interiors (M300)
Applications of Advanced
High-Strength Steels and Press
Hardening for Automotive
Structures (M202)
CAE Analysis and Application:
Multi-Discipline Interaction
(M110)
Papers with an emphasis on, but not limited
to, innovative ideas to enhance automotive
safety with improved material constitutive
modeling, analysis method developments,
simulation and pre/post processing
tools, optimization techniques, crash
code developments, finite element model
updating, model validation and verification
techniques, dummies and occupants,
restraint systems, passive safety as well
as lightweight material applications and
designs are highly encouraged.
This session will feature technical
presentations that will discuss new
technology and industry insights in
automotive interiors. Focus areas include
materials, perceived quality, environmental
concerns, manufacturing, safety, and
durability.
This symposium provides a forum for
researchers and application engineers
to disseminate the knowledge and
information gained in the area of advanced
high-strength and press-hardening steel
development and applications in automotive
structures, enabling light-weight and
durable vehicles with improved safety.
Key words: CAE, coupling, multi-discipline
interaction
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Jwo Pan, Univ. of Michigan-Ann Arbor; Tau
Tyan, Ford Motor Co.; Guofei Chen, United
States Steel Corp.; Wei Li, General Motors
LLC; William J. Altenhof, Univ. of Windsor;
Sheng-Dong Liu, Generalety LLC
Organizers:
Robert Egbers, Comusa LLC; Lisa Fallon,
General Motors LLC; Stephen M. Pitrof,
Inteva LLC; Ravi Thyagarajan, US Army
TARDEC
Organizers:
Constantin Chiriac, United States Steel Corp.;
Jason Coryell, General Motors; Emmanuel
De Moor, Colorado School of Mines; Jatinder
P. Singh, General Motors; Michael Santella;
Michael J. Worswick, Univ. of Waterloo
Organizers:
Fan Li, GM; Mike Guo, Chrysler LLC; Peiran
Ding, ANSYS Inc.
System Level Design Simulation to Predict
Passive Safety Performance for CFRP
Automotive Structures
Effect of Fabric Type and Construction on
Automotive Seating Comfort
Keynote: Automotive Application of AHSS:
Clearing the Hurdles to Meet Automotive
Fuel Efficiency and Safety Regulation
Simulation of Fluid-Structure Interaction
using a Combined Sc/Tetra and Abaqus
Tool
(2013-01-0663)
(2013-01-0654)
(Oral Only)
(Oral Only)
Juergen Lescheticky, BMW Group; Graham
Barnes, Engenuity Limited; Marc Schrank,
Dassault Systemes Simulia Corp.
Pritpal Singh, Sandeep Raina, Kapil Kumar
Pandey, Sweta Bansal, Maruti Suzuki
India, Ltd.
David W. Anderson, American Iron and
Steel Institute
Shuo Mao, Graduate student,Wright State
University; George Huang, Professor and
Chair, ME Dept. WSU; Veera Venkata Sunil
Vytla, Cradle North America Inc.; Yuya
Ando, Software Cradle Co Ltd.
Investigation of Crashworthiness of
Structural Composite Components in
Frontal and Side NCAP Tests
Analysis and Optimization of Effect
of Ageing on Automotive Seat Fabric
Performance
Overview of a New Category of Cold
Formable NanoStructured 3rd Generation
AHSS
Analysis of Open Plenum Structure for
Reduction of Booming Noise
(2013-01-0650)
(2013-01-0612)
(Oral Only)
(2013-01-0636)
Chung-Kyu Park, Cing-Dao (Steve) Kan,
The George Washington University; William
Thomas Hollowell, WTH Consulting LLC
Sarita Kumari, Dinesh N Dave, Pankaj
Maheshwari, Maruti Suzuki India Limited
Daniel James Branagan, The NanoSteel
Company
Gajanan Tonge, Surendra Agrawal, Chrysler
India Technical Centre
Side Crash Pressure Sensor Prediction for
Unitized Vehicles: An ALE Approach
Root Cause Analysis of Discoloration of
Polypropylene in Automobile Interiors
Improvement of Stretch Flangeability of
High-Tensile-Strength Steel Sheets by
Piercing under Tension Using Humped
Bottom Punch
Smart Meshing Template Process with
CAD/CAE Link
(2013-01-0657)
(2013-01-0615)
(2013-01-0609)
(2013-01-0637)
Tau Tyan, Kirk Arthurs, Jeffrey Rupp,
Melissa Parks, Kumar Mahadevan, Saeed
Barbat, Nand Kochhar, John Fazio, David
Bauch, Ford Motor Co.
Vandana Chauhan, Amulya Kali Ray, Maruti
Suzuki India Limited
Yuzo Takahashi, Osamu Kawano, Satoshi
Horioka, Kohsaku Ushioda, Nippon Steel &
Sumitomo Metal Corporation
Honglu Wang, Vijay Patil, William Resh,
Phil Insalaco, Dan Flesher, Scott Lanski,
Chrysler Group LLC
Side Crash Pressure Sensor Prediction for
Body on Frame Vehicles: An ALE Approach
Lightweighting in Automotive Interiors
Studies on Edge Strain Hardening
Produced by Trimming Operations
Fluid Structure Interaction of Micro Air
Vehicles Using a combined Sc/Tetra and
Abaqus Simulations
(2013-01-1774)
(Oral Only)
Constantin Chiriac, Ming F. Shi, United
States Steel Corp.
Alex Byrd
(2013-01-0666)
Tau Tyan, Kirk Arthurs, Jeffrey Rupp,
Charles Ko, Bill Sherwood, Leonard Shaner,
Saeed Barbat, Nand Kochhar, John Fazio,
David Bauch, Ford Motor Co.
Panelists from Automotive OEMs will speak
on their views regarding regulatory needs to
reduce overall vehicle weight, the emphasis
being placed for interiors components share
in the overall vehicle weight reduction goals,
and current technical trends and challenges
to meet the interior lightweighting goals.
Papers should discuss the simulation
methods for the coupled effects of various
physical phenomena, including (not limited
to) the following methods:
• Sequential coupling/de-coupling of multidiscipline CAE methods
• Direct/Parallel coupling/de-coupling of
multi-discipline CAE methods
• Implicit and explicit simulation or cosimulation methods for multi-discipline
coupling
Panelists:
Timothy Boundy, General Motors
Mark Sheldon, Chrysler Group LLC
Jeffrey Webb, Ford Motor Co., Ltd.
9:20
a.m.
9:40
a.m.
Material Models for Simulation of a LithiumIon Battery Module Specimen under Punch
Indentation
Temperature Effects on the Deformation and Multi-Disciplinary Analyses for Brake Fluid
Fracture of a Quenched-and-Partitioned
Temperature Evaluation
Steel
(Oral Only)
(2013-01-0610)
(2013-01-0635)
Mohammed Yusuf Ali, Univ. of MichiganAnn Arbor; Wei-Jen Lai, Jwo Pan, Univ of
Michigan-Ann Arbor
Jason Coryell, Vesna Savic, Louis Hector,
Sushil Mishra, General Motors Company
Tinghui Shi, Robert Nisonger, General
Motors Company
Mechanical Behavior of Lithium-Ion
Battery Cell and Module Specimens under
Constrained Compression
Impact Testing of a Hot-Formed B-Pillar
with Tailored Properties - Experiments and
Simulation
Implementing Simulation Driven Product
Development for Thermoforming of an
Instrument Panel
(Oral Only)
(2013-01-0608)
(2013-01-0642)
Wei-Jen Lai, Mohammed Yusuf Ali, Jwo
Pan, Univ of Michigan-Ann Arbor
Ryan George, Michael J. Worswick,
University of Waterloo; Duane Detwiler,
Honda R&D Americas Inc; Jidong Kang,
CanmetMATERIALS
Hossam Metwally, Peiran Ding, ANSYS Inc.
101
MATERIALS
MATERIALS
TIME
D0-06A
10:00
a.m.
10:20
a.m.
10:40
a.m.
D0-03B
D0-03A
D0-05B
Advances in Instrument Panels,
Seats and Interiors (M300)
Applications of Advanced
High-Strength Steels and Press
Hardening for Automotive
Structures (M202)
CAE Analysis and Application:
Multi-Discipline Interaction
(M110)
This session will feature technical
presentations that will discuss new
technology and industry insights in
automotive interiors. Focus areas include
materials, perceived quality, environmental
concerns, manufacturing, safety, and
durability.
This symposium provides a forum for
researchers and application engineers
to disseminate the knowledge and
information gained in the area of advanced
high-strength and press-hardening steel
development and applications in automotive
structures, enabling light-weight and
durable vehicles with improved safety.
Key words: CAE, coupling, multi-discipline
interaction
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Organizers:
Robert Egbers, Comusa LLC; Lisa Fallon,
General Motors LLC; Stephen M. Pitrof,
Inteva LLC; Ravi Thyagarajan, US Army
TARDEC
Organizers:
Constantin Chiriac, United States Steel Corp.;
Jason Coryell, General Motors; Emmanuel
De Moor, Colorado School of Mines; Jatinder
P. Singh, General Motors; Michael Santella;
Michael J. Worswick, Univ. of Waterloo
Organizers:
Fan Li, GM; Mike Guo, Chrysler LLC; Peiran
Ding, ANSYS Inc.
Front Rail Crashworthiness Design for
Front Oblique Impact using a Magic Cube
Approach
Development of Tailored Hot Stamping
Parts for Improving Crashworthiness
Fluid Structure Interaction Simulation of Fuel
Tank Sloshing
(2013-01-0651)
(Oral Only)
(2013-01-0641)
Sibo Hu, Beijing Automotive Technology
Center/Dalian Univ. of Tech.; Zheng-Dong
Ma, University of Michigan; Chang Qi,
Dalian University of Technology; Yi Ding,
Beijing Automotive Technology Center
Ho young Kong, Hot stamping
Veera Venkata Sunil Vytla, Cradle North
America, Inc.; Yuya Ando, Software Cradle
Co Ltd
Structural Optimization of Thin-Walled
Tubular Structures for Progressive Buckling
Using Compliant Mechanism Approach
1700MPa Martensitic Steel in Automotive
Bumper Applications
CFD-Based Wave-Number Analysis of SideView Mirror Aeroacoustics towards AeroVibroacoustic Interior Noise Transmission
(2013-01-0658)
(Oral Only)
(2013-01-0640)
Satyajeet Shinde, Indiana University Purdue
University Ind; Punit Bandi, Autoliv North
America Inc; Duane Detwiler, Honda
R&D Americas Inc; Andres Tovar, Indiana
University Purdue University Ind.
Brian Malkowski, Shape Corp.
Fred G. Mendonca, Teo Shaw, Alan Mueller,
CD-adapco; Paul Bremner, Scott Clifton,
AeroHydroPlus
Papers should discuss the simulation
methods for the coupled effects of various
physical phenomena, including (not limited
to) the following methods:
• Sequential coupling/de-coupling of multidiscipline CAE methods
• Direct/Parallel coupling/de-coupling of
multi-discipline CAE methods
• Implicit and explicit simulation or cosimulation methods for multi-discipline
coupling
A Development of 780MPa Hot Rolled High
Strength Steel for Application to Automotive
One-Piece Front Lower Control Arm
(2013-01-0665)
Kyoungju Sohn, JinHwa Jeon, Hyundai
Steel
11:00
a.m.
Cost-Effectiveness of a Lightweight Design
for 2017-2020: An Assessment of a Midsize
Crossover Utility Vehicle
(2013-01-0656)
Cheryl Caffrey, Kevin Bolon, Hugh Harris,
US Environmental Protection Agency; Greg
Kolwich, FEV Inc; Robert Johnston, EDAG
Inc; Tim Shaw, Munro & Associates
11:20
a.m.
Cost-Effectiveness of a Lightweight BIW
Design for 2020-2025: An Assessment of
a Midsize Crossover Utility Vehicle Body
Structure
(2013-01-0667)
Gregory Peterson, Andrew Peterson, Lotus
Engineering Inc
10:01
p.m.
Model Coupling with a Function-Based
Modular Framework for Entire-System
Simulation (Written Only -- No Oral
Presentation)
(2013-01-0643)
Florian Netter, Audi Electronics Venture
GmbH; Frank Gauterin, Karlsruhe Institute
of Technology; Johannes Schreyer, Munich
University of Applied Sciences
102
TIME
D0-06B
Casting Materials (M204)
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
10:20
a.m.
10:40
a.m.
D0-05A
D0-03A
Load Simulation and Vehicle Performance (Part
2): Multi-Body Dynamics (M107)
Advances in Bar Steel and Heat Treatment
Technology (M209)
Session focus will be on the comparison of modeling techniques
between vehicle dynamics simulation and durability loads
simulation as well as optimal development process considering
vehicle dynamics and durability loads. Furtherl discussion on data
processing and analysis techniques, loads sensitivity, DOE and
optimal design techniques for loads minimization, prediction of
manufacturing tolerance effects on loads, robust design methods,
driver modeling , and FE-based system modeling will occur.
The development, manufacturing, and heat treatment of bar
steel product continues to evolve to meet the demands of the
transportation industry. Design challenges surrounding fuel
economy, cost, quality, durability and environmental impact are
driving new approaches to steel for critical vehicle components.
New steel grades, heat treatment technologies, mill processes
and forming methods are active topics of research to meet these
opportunities.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
11:00 a.m. - 11:40 a.m.
Organizers:
Thomas Prucha, American Foundry Society Inc.; Lin
Zhang, Chrysler Group LLC
Organizers:
Paramsothy Jayakumar, TARDEC; Dan Negrut, Univ. of
Wisconsin
Organizers:
David W. Anderson, American Iron and Steel Institute; Michael L.
Shaw, Chrysler LLC
Structured Problem Solving of Hot Cracking of
Stainless Steel Castings
Virtual Road Load Data Acquisition using Full Vehicle
Simulations
(Oral Only)
(2013-01-1189)
Delin Li, CanmetMATERIALS
Nantu Roy, Mark Villaire, Chrysler Group LLC
Austempering Temperature on Tensile Properties
and Hardenability of Intercritically Austempered
Ductile Iron
Predicting the Response of a Seat-Occupant Model by Using
Incremental Harmonic Balance
(Oral Only)
(2013-01-1190)
Robin D. Foley, UAB
Yousof Azizi, Anil Bajaj, Patricia Davies, Ray W. Herrick
Laboratories, Purdue Univ.
Bridging Nanoscience and Lightweighting Metal
Casting
Investigating Through Simulation the Mobility of Light Tracked
Vehicles Operating on Discrete Granular Terrain
(Oral Only)
(2013-01-1191)
Xiaochun Li, Univ. of Wisconsin
Dan Negrut, Daniel Melanz, Hammad Mazhar, University of
Wisconsin - Madison; David Lamb, Paramsothy Jayakumar,
Michael Letherwood, US Army TARDEC
Weight Reduction of Passenger Cars by Application
of High Performing Aluminum Alloys
Development of New Generation of Multibody System
Computer Codes
(Oral Only)
(2013-01-1192)
Ralf Klos, Rheinfelden ALLOYS GmbH & Co. Kg
Ahmed A. Shabana, Univ. of Illinois at Chicago; Paramsothy
Jayakumar, TARDEC; Michael Letherwood, US Army TARDEC
UAB - Cast 7000 Series Aluminum
Improvement of Virtual Vehicle Analysis Efficiency with Optimal
Modes Selection in Flexible Multi-Body Dynamics
(Oral Only)
(2013-01-1193)
Robin D. Foley, UAB
Geunsoo Ryu, Jaewook Jeon, Hyundai Motor Company
The Potential of the Die Casting Technique for the
Production of Highly Stressed Components in the
Automotive Industry
Development of Wheel Loader Dynamic Simulation Model
(Oral Only)
(2013-01-1194)
Klaus Greven, KSM Castings GmbH
Kwang Seok Oh, Seungjae Yun, Hakgu Kim, Kyongsu Yi,
Seoul National Univ; Kyungeun Ko, Panyoung Kim, Hyundai
Heavy Industries
Latest Advancements and Technologies in
Aluminum Castings
An Abstract Multirate Method for Vehicle Dynamics Simulation
(Oral Only)
(2013-01-1196)
Qigui Wang, General Motors
James Critchley, Multibody.org; Paramsothy Jayakumar, U.S.
Army TARDEC
Reduced Silicon Alloys for Enhanced Casting
Performance
Compaction-Based Deformable Terrain Model as an Interface
for Real-Time Vehicle Dynamics Simulations
(Oral Only)
(2013-01-1197)
David Weiss, ECK Industries Inc.
Justin Madsen, University of Wisconsin - Madison; Andrew
Seidl, Dan Negrut, Univ of Wisconsin
Fusion Welding of Vacuum High Pressure Die Cast
Aluminum Alloy A356 and Wrought Alloy 6061
(2013-01-1026)
Meng Wang, Henry Hu, Univ. of Windsor
11:00
a.m.
11:20
a.m.
Magnesium Casting Technology - Past, Present
and Future
Austempering Proccess For Carburized Low Alloys Steels
(Oral Only)
(2013-01-0949)
Alan Luo, General Motors Corporation
Rebeca Lumbreras, Oakland University; Xichen Sun, Chrysler
Group LLC; Gary Barber, Qian Zou, Oakland University
Cast Magnesium Alloys for High-Temperature
Applications
Advanced Heat Treatments for Ferrous Alloys
(Oral Only)
(2013-01-0950)
Frank Czerwinski, CanmetMaterials
Alan Druschitz, Virginia Tech.; Melvin Ostrander, Rex Heat Treat;
Ricardo Aristizabal, Universidad de Antioquia
Planned by Non-Ferrous Committee / Materials
Planned by Materials Modeling and Testing Committee /
Planned by Ferrous Committee / Materials Engineering Activity
The papers in this session are available in SAE Technical
Paper Collection, COLL-TP-00338, and also individually. To
SAE 2013 World Congress 103
MATERIALS
MATERIALS
TIME
D0-06A
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
104
D0-03B
D0-05B
D0-05A
CAE Durability Analysis and
Applications (Part 1): Fatigue
Theory and Methodology
Development (M109)
Performance (Part 1): Tire and
Terrain (M107)
This session will provide a look at research
on coatings for exterior body and plastics
(including polycarbonate) as well as vehicle
interiors and underbody/underhood. Focus
will be on mid-term and future research.
This technical session focuses on
state-of-the-art fatigue theory and
advanced development in fatigue analysis
methodology and research. Studies and
discussions on innovative and improved
fatigue theory/methods in material
constitutive modeling, damage rules/
fatigue damage calculation, and fatigue life
predictions will be addressed.
Tire and terrain mechanics modeling for
load simulations, tire model development,
parameters identification, and sensitivity
analyses, tire test development, road profile
characterization, effective road profile
development, and interactions between
tire, suspension/steering/brake systems,
and different terrains, spindle loads/travel
variation characteristics from proving
ground test on deterministic and rough
roads, terramechanics, tire noise, rolling
resistance, and correlation studies.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
Todd Fitz, Honda R&D Americas Inc.;
Arun Kumar Sikder, GE; Daniel G. Wright,
BASF Corp.; James Keller, United Paint &
Chemical Corporation
Organizers:
Guofei Chen, United States Steel Corp.;
Mike Guo, Chrysler LLC; Ali Fatemi, Univ. of
Toledo; Mark A. Pompetzki, HBM-nCode;
Yung-Li Lee, Chrysler Group LLC
Organizers:
Emmanuel O. Bolarinwa, Federal Highway
Administration; Jianfeng Ma, St. Louis Univ.;
Estimation of Secondary Mass Changes in
Vehicle Design
Rheology of Waterborne Coatings: The
Latest on Theory and Engineering Practice
Life Prediction for Welds between Two
Sheets of Similar and Dissimilar Materials
Based on Fracture Mechanics Solutions
Structural MBD Tire Models: Closing the
Gap to Structural Analysis - History and
Future of Parameter Identification
(2013-01-0655)
(Oral Only)
(Oral Only)
(2013-01-0630)
Donald E. Malen, Univ. of MichiganAnn Arbor; René Göbbels, RWTH
Aachen Univ.; Roland Wohlecker, Fka Forschungsgesellschaft Kraftfahrwe
Timothy S. December, BASF Corp.
Jwo Pan, Univ. of Michigan-Ann Arbor
Axel Gallrein, Manfred Baecker, Andrey
Gizatullin, Fraunhofer ITWM
Hybrid III 50th Dummy Ankle Performance
Study and Proposed Design Modification
The Flexible Pretreatment Process for
Multimetal Bodies: Zinc Phosphate plus
Zirconium Oxide
(2013-01-0664)
(Oral Only)
Lihua Li, Chery Automobile Co Ltd; Youmei
Zhao; Guangyong Shen
Bruce H. Goodreau, Michael Sienkowski,
Joseph Caiozzo, Henkel Corp.
The Effects of the BioRID Dummy Head
Position on the Whiplash Test Evaluation
Matte Clearcoat Use in the Automotive
Industry
Fatigue Evaluation of Notched Plate
Specimens by the Battelle Structural Stress
Method
Experimental Investigation of Vehicle
Behavior on a Slopped Terrain Surface
(2013-01-0660)
(Oral Only)
(2013-01-1011)
(Oral Only)
Pengxiang Wang, Chery Automobile Co.,
Ltd.
Michael R. Mulligan, Michael Millar, PPG
Jeong Kyun Hong, Thomas Forte, Battelle
Administration
Effects of Pore Distributions on Ductility
of Thin-Walled High Pressure Die-Cast
Magnesium
Multilayer Coatings for Polycarbonate
Glazing: Influence of Mechanical Properties
on the Abrasion Performance of the Coating
System
Fatigue Life Prediction of an Automobile
Cradle Mount
Development of Truck Tire-Soil Interaction
Model using FEA and SPH
(2013-01-0644)
(2013-01-0981)
(2013-01-1009)
(2013-01-0625)
Kyoo Sil Choi, Dongsheng Li, Xin Sun,
Pacific Northwest National Laboratory; Mei
Li, Ford Motor Co; John Allison, University
of Michigan
Arun Kumar Sikder; Dinesh K, Radha
Kamalakaran, GE India Technology Center
Pvt Ltd; Nicole Paull, Judith Marnell, Steven
Gasworth, Stephen Shuler, SABIC
Touhid Zarrin-Ghalami, Ali Fatemi, Univ. of
Toledo; Yung-Li Lee, Chrysler Group LLC
Ranvir S. Dhillon, Rustam Ali, Moustafa
El-Gindy, University of Ontario Institute of
Tech.; David Philipps, Fredrik Oijer, Inge
Johansson, Volvo Group Trucks Technology
Advanced Reinforcement Materials for
Engine and Vehicle Efficiency
New Denim Stain Resistant Coating
Technology for Automotive Seating Surfaces
Techniques for Contact Considerations
in Fatigue Life Estimations of Automotive
Structures
Dynamic Load Estimation for Heavy Trucks
on Bridge Structures
(2013-01-0649)
(Oral Only)
(2013-01-1201)
(2013-01-0626)
Gian-Luigi Molteni, DuPont Automotive
Paola Morales, United Paint & Chemical
Corporation
Mingchao Guo, Kaizhi Quan, Suresh
Bhosale, Congyue Wang, Sridhar Srikantan,
Chrysler Group LLC
Timothy Gordon, Mainak Mitra, Univ. of
Michigan
Effect of Temperature and Aeration on FluidElastomer Compatibility
Quantifying Surface Activation in Treatment
of Automotive Plastics
Rain Flow Counting Based Block Cycle
Development for Fatigue Analysis Using
Nonlinear Stress Approach
Torque Distribution Algorithm of SixWheeled Skid-Steered Vehicles for OnRoad and Off-Road Maneuverability
(2013-01-0652)
(Oral Only)
(2013-01-1206)
(2013-01-0628)
Nancy Zeng, Cheryl L. O’Brien, Carole
M. Wolfe, Craig O’Brien, General Motors
Company
Giles Dillingham, Brighton Technologies
Group
Weidong Zhang, Mingchao Guo, Sridhar
Srikantan, Chrysler Group LLC
Jaewon Nah, Kyongsu Yi, Seoul National
Univ; Wongun Kim, Yeogiel Yoon, Samsung
Techwin
Numerical Simulation of Shock Absorbing
Polyester Elastomers
Forecast Salt Spray Test Results
of Automotive Corrosive Parts by
Electrochemical Corrosion Evaluation
Fatigue Life Calculation with Loads Varying
in Magnitude and Direction
Developing a Compact Continuous-State
Markov Chain for Terrain Road Profiles
(2013-01-0653)
(Oral Only)
(2013-01-0999)
(2013-01-0629)
Takaya Kobayashi, Yasuko Mihara,
Mechanical Design & Analysis Corporation;
Katsuhisa Yamashita, Chisato Nonomura,
Katsuhiro Kodama, Yumiko Isogai, Tomoko
Kanaya, TOYOBO Co. Ltd.
Santosh Kumar Sarang, Aisin Technical
Center of America
John Altobelli, NAVAIR Lakehurst; Tirupathi
R. Chandrupatla, Rowan University
Jacob N. Lambeth, John Ferris, Virginia
Tech; Alexander Reid, David Gorsich, US
Army RDECOM
Chairpersons:
Jianfeng Ma, St. Louis Univ.; Emmanuel O.
Bolarinwa, Federal Highway Administration;
TIME
D0-06A
D0-03B
D0-05B
D0-05A
Applications (Part 1): Fatigue
Theory and Methodology
Development (M109)
Performance (Part 1): Tire and
Terrain (M107)
This session will provide a look at research
on coatings for exterior body and plastics
(including polycarbonate) as well as vehicle
interiors and underbody/underhood. Focus
will be on mid-term and future research.
state-of-the-art fatigue theory and
advanced development in fatigue analysis
methodology and research. Studies and
discussions on innovative and improved
fatigue theory/methods in material
constitutive modeling, damage rules/
fatigue damage calculation, and fatigue life
predictions will be addressed.
Tire and terrain mechanics modeling for
load simulations, tire model development,
parameters identification, and sensitivity
analyses, tire test development, road profile
characterization, effective road profile
development, and interactions between
tire, suspension/steering/brake systems,
and different terrains, spindle loads/travel
variation characteristics from proving
ground test on deterministic and rough
roads, terramechanics, tire noise, rolling
resistance, and correlation studies.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
Todd Fitz, Honda R&D Americas Inc.;
Arun Kumar Sikder, GE; Daniel G. Wright,
BASF Corp.; James Keller, United Paint &
Chemical Corporation
Organizers:
Guofei Chen, United States Steel Corp.;
Mike Guo, Chrysler LLC; Ali Fatemi, Univ. of
Toledo; Mark A. Pompetzki, HBM-nCode;
Organizers:
Administration; Jianfeng Ma, St. Louis Univ.;
A Thermal-Fatigue Life Assessment
Procedure for Components under
Combined Temperature and Load Cycling
Numerical Investigation of Dynamic Impact
between Cellular Shear Band Based NonPneumatic Tire and Sand with Obstacle
(2013-01-0998)
(2013-01-0631)
3:20
p.m.
Chairpersons:
Jianfeng Ma, St. Louis Univ.; Emmanuel O.
Bolarinwa, Federal Highway Administration;
Zhigang Wei, Tenneco Automotive Co., Ltd.; Jianfeng Ma, St. Louis Univ.
Shengbin Lin, Limin Luo, Fulun Yang, Dmitri
Konson, Tenneco Inc
3:40
p.m.
Development of a Combat Vehicle FEA Tire
Model for Off-Road Applications
(2013-01-0632)
Hossam Ragheb, Moustafa El-Gindy,
Hossam Kishawy, University of Ontario
Institute of Tech.
4:00
p.m.
Experimental Investigation of Tyre Dynamic
Strain Characteristics for Developing Strainbased Intelligent Tyre System
(2013-01-0633)
Xiaoguang Yang, Oluremi Olatunbosun,
Univ of Birmingham; Daniel Garcia-Pozuelo
Ramos, Universidad Carlos III de Madrid,
Spain; Emmanuel Bolarinwa, Federal
Highway Administration
10:01
p.m.
Body Lightweight Design and Scalability
with Structural Foam Solutions (Written Only
(2013-01-0669)
Horst Lanzerath, Ford Research &
Advanced Engineering; Carsten Tragsdorf,
CTES Engineering
10:02
p.m.
Use of Finite Element Simulation for
Modeling Vertically Aligned Carbon
Nanotube Arrays Based on Structural
Mechanics Principles (Written Only -- No
Oral Presentation)
(2013-01-0645)
Johnson Joseph, Y Charles Lu, University
of Kentucky
MATERIALS
MATERIALS
TIME
D0-03A
1:00
p.m.
D0-03A
Magnesium Technologies (M205)
Specialty Alloys (M208)
With the higher federal fuel economy
standards announced recently, Mg is
becoming increasingly more attractive
as structural material for automobiles. In
recent years, the interest in magnesium
research for automotive applications has
expanded beyond cast alloys to include
wrought alloys. The focus is not only on
improving alloy properties, but also on
reducing process costs. The technical
papers to be presented at the 2013
Magnesium Technologies sessions reflect
this broadening perspective.
As demands increase for greater safety,
energy efficiency and corrosion resistance,
so do considerations of alternative higher
performance metallic alloys in automotive
applications. We invite papers discussing
innovative applications and developments
in titanium alloys, specialty stainless alloys
and powder metal products, among others
– beyond high strength steel and aluminum
alloys. Topics of particular interest include
metallurgy, joining, performance testing,
design and corrosion behavior.
1:00 p.m. - 3:20 p.m.
3:00 p.m. - 4:00 p.m.
Organizers:
Fadi Abu-Farha, Clemson University; Alan
Luo, General Motors Corporation
Organizers:
Thomas Glennan, Technical Writing
Solutions LLC; Brandon M. Hance, AK
Steel Corp.
Casting Process and Mechanical Properties
of Large-Scale Extruded Mg-Zn-Y Alloys
The purpose of this session is to provide an
open exchange of ideas. Remarks made by
participants or members of the audience
cannot be quoted or attributed to the
individual or their company unless express
permission has been granted by the individual
and their company. Any record of remarks,
discussion, or photographs may not be used
unless express permission has been granted
(2013-01-0979)
Yuichi Ienaga, Kenshi Inoue, Honda R&D Co
Ltd; Tokuteru Uesugi, Kenji Higashi, Osaka
Prefecture University
1:20
p.m.
An Experimental and Numerical Study of the
Microstructural and Mechanical Properties
of an Extruded Magnesium Alloy at 450 °C
and Varied Strain Rates
(2013-01-0976)
Q. Ma, B. Li, A.L. Oppedal, P.T. Wang,
Center for Advanced Vehicular Systems;
Alan Luo, General Motors Company;
Mark Horstemeyer, Center for Advanced
Vehicular Systems
1:40
p.m.
Microstructure-Sensitive Fatigue Modeling
of an Extruded AM30 Magnesium Alloy
(2013-01-0980)
Marcos Lugo, Mississippi State University;
J. B. Jordon, University of Alabama; J.D.
Bernard, M.F. Horstemeyer, Mississippi
State University
2:00
p.m.
Fatigue Life Prediction of Magnesium Alloys
Subjected to Variable Amplitude Loading
(Oral Only)
Hong Tae Kang, Univ. of Michigan-Dearborn
2:20
p.m.
Effect of Adhesive Addition on Fatigue
Performance of Magnesium Alloys SelfPiercing Riveted Joints
Materials
(Oral Only)
Chonghua Jiang, AET Integration Inc.
2:40
p.m.
Mechanical Behavior of Magnesium Single
Crystal under High-Strain-Rate Dynamic
Loading
(Oral Only)
Qizhen (Katherine) Li, Univ. of Nevada Reno
3:00
p.m.
Development of Corrosion Testing Protocols
for Magnesium Alloys and MagnesiumIntensive Subassemblies
Fe-Si Sintered Alloy for use in Exhaust
Applications
(2013-01-0978)
(2013-01-1154)
Robert C. McCune, Robert C. McCune
& Associates, LLC; Joy Forsmark, Brian
Schneider, Ford Motor Co; Alan Luo, Helen Gu,
William Schumacher, Xi Chen, General Motors
Co; Florina Vartolas, Chrysler Group LLC
Thomas Cornelio, Michael R. Schloder,
Michael O’Neill, Alpha Sintered Metals Inc.;
Stephen Bowyer, Gary Vrsek, FEV Inc
3:20
p.m.
Development of New Intermediate Nickel
Alloys for Application in Automotive Valves
of High Performance Engines
(2013-01-1153)
Alexandre Bellegard Farina, Rodrigo César
N. Liberto, Celso Antonio Barbosa, Villares
Metals S/A
3:40
p.m.
Development of the Manufacturing Method
for Low-Gloss Stainless Steel Sheet and Its
Corrosion Characteristics
(Oral Only)
Dong-Jae Choi, Materials Engineering
106
Titles include:
Weight Reduction, 2013
Automotive Engineering Testing
and Test Methods, 2013
Applications, 2013
Optical Measurement and
Nondestructive Testing
Techniques, 2013
Performance, 2013
46 Papers, (estimate),
COLL-TP-00338
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
P135216
TIME
D0-03B
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
D0-06A
D0-05B
D0-05A
Automotive Tribology - Modeling
and Testing (Part 1 of 2) (M111)
CAE Durability Analysis
and Applications (Part 2 A):
Applications to Automotive
Engineering (M109)
Performance (Part 4): Ride
Comfort (M107)
This session contains papers which
describe the use of modern automotive
composites in structural applications.
Design, process, and analytical
presentations are included, as well as
papers presenting results of bonding
strategies and techniques. Engineers
involved in the design and use of advanced
composites will find this session of
particular value.
fundamental and applied research that
lowers frictional energy losses and
enhances reliability and durability of
automotive components. The topics
include, but not limited to engine and
drivetrain tribology, seals, bearing and gear
lubrication, materials tribology, surface
engineering, lubricants and additives,
computer-aided tribology, tribotesting,
as well as friction, wear and lubrication
fundamentals.
applications of innovative and improved
stress and fatigue analysis methods to
automotive engineering. Studies and
discussions on practical problem-solving/
CAE modeling techniques on whole vehicle,
body, chassis, components, joints, powertrain systems and assemblies, etc. will be
addressed.
Focusing on studies of driver behavior
modeling, driving simulator techniques, vehicle
ride comfort evaluation and enhancement,
test/simulation correlation analysis, vehicle
elastomeric component modeling (i.e.
bushings, rubber mounts, springs, dampers,
seat cushions), passive, semi-active and
active suspension systems, suspension seat
analysis and modeling techniques, the effect
and control of beaming, shaking, impact
harshness, brake judder and any other
phenomena affecting ride comfort of driver.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 10:20 a.m.
Organizers:
Somasekhar Bobba, GE India Technology
Center; Bruce N. Greve, General Motors
Vehicle Engineering Cntr.; Y Charles Lu,
University of Kentucky; Srikanth Pilla, Univ.
of Wisconsin-Madison; Richard Dale Tonda,
SEA, Ltd.
Organizers:
Sung Cha, Hyundai Motor Company; Qian
Zou, Oakland University; Ozgen Akalin,
Istanbul Technical Univ.; Qingmin Yang,
Federal-Mogul Corp.; Yucong Wang,
General Motors LLC
Organizers:
Mike Guo, Chrysler LLC; Guofei Chen,
United States Steel Corp.; Abolhassan
Khosrovaneh, GM; Zhigang Wei, Tenneco
Automotive Co., Ltd.; Guangtian Gavin
Song, AM General LLC; Yung-Li Lee,
Chrysler Group LLC
Organizers:
Jennifer Johrendt, Univ. of Windsor; Peijun
Xu, Ebco Inc.; Jingzhou James Yang, Texas
Tech. University
Chairpersons:
Sung Chul Cha, Hyundai Motor Group R&D; Qian Zou, Oakland University
HiAnt® Simulation: Simulating Structural
Composite Hybrid Parts made from
Continuous Fiber Reinforced Plastics
Frontiers of Multi-functional Smart
Tribological Coatings for Automotive
Applications
A New Method of d’Alembert’s Principle
Finite Element Based Fatigue Calculation
with Input of Loads and Accelerations
Keynote: Digital Human Modeling for
Seated Occupants
(Oral Only)
(Oral Only)
(2013-01-1003)
(Oral Only)
Vasant Pednekar, Lanxess Corp.
Ali Erdemir, Argonne National Laboratory
Barry (Baizhong) Lin, Chrysler Group LLC
James Yang, Texas Tech. Univ.
Leveraging Non-Automotive Design Criteria
to Enhance Overall Value and Quality of
Direct Molded Long Fiber Thermoplastic
Automotive Parts
New Methodologies for Efficient and
Accurate Fatigue Prediction of Seam Welds
(Oral Only)
(2013-01-1008)
Darin J. Grinsteinner, CPI Binani Inc.
Michael Hack, Frank Zingsheim, LMS, A
Siemens Business
Composite Material for On-Line Painting
Recent Developments of Amorphous
Hydrogenated Carbon Based DLC Coatings
for Automotive Applications
Random Vibration Testing Development
for Engine Mounted Products Considering
Customer Usage
Evaluation of Human Body Response for
Different Vehicle Seats Using
a Multibody Biodynamic Model
(Oral Only)
(Oral Only)
(2013-01-1007)
(2013-01-0994)
Guillaume CLEDAT, CCP Composites
France
Martin Keunecke, Fraunhofer IST
Liang Wang, Oakland University; Robert
Burger, Yung-Li Lee, Chrysler Group LLC;
Keyu Li, Oakland Univ
Prasad Kumbhar, Texas Tech University;
Peijun Xu, Ebco Inc; James Yang, Texas
Tech University
Finite Element Method Based Fatigue
Analysis of A Gray Cast Iron Component
Improvement of Bus Ride Comfort via
Active Suspension and Connected
Dampers
Mechanical Properties of Carbon Discotex
Versus Twill Reinforced Composites
(Oral Only)
(2013-01-1205)
(2013-01-0990)
Amber Simmons, Pepin Associates
Yue Ma, Cummins Inc.
Mina M.S. Kaldas, IAE, TU Braunschweig;
Aref M.A. Soliman, South Valley University
Production of a Composite Monocoque
Frame for a Formula SAE Racecar
DLC Coating for Automotive Precision
Components to Minimize Wear and Friction
The Large Scale Finite Element Analysis of a
Charge Air Coolers using a Homogenization
Method
Rule Optimized Fuzzy Logic Controller for
Full Vehicle Semi-Active Suspension
(2013-01-1173)
(Oral Only)
(2013-01-1212)
(2013-01-0991)
Leonard Hamilton, Peter Joyce, Chris
Forero, Martin McDonald, US Naval
Academy
André Hieke, A. Hieke
Keisuke Iwahori, DENSO Corp.; Nobutada
Ohno, Dai Okumura, Tomoya Muraki,
Nagoya University; Susumu Miyakawa,
DENSO Corp.
Mina M.S. Kaldas, Kemal Çalışkan,
Roman Henze, Ferit Küçükay, IAE, TU
Braunschweig
Effect of B4C Particles on Dry Sliding Wear
Behavior of LM-13 Metal Matrix Composite
Advanced Tribological Coatings for
Automotive Parts and their Production
A Fatigue Life Prediction Method for Spot
Welded Joints of Aluminum Alloys
Ride Comfort Evaluation of Horizontal
Vibration in Tractor-Trailer Considering
Human Body Motion of Driver
(2013-01-1174)
(Oral Only)
(2013-01-1208)
(2013-01-0992)
Tejas Chaukulkar, Manisha Chemicals;
Prajeen Dumbare; Rahul Waikar,
Vishwakarma Institute of Technology Pune
Marcus Morstein, PLATIT AG
Hong Tae Kang, Univ. of MichiganDearborn; Abolhassan Khosrovaneh,
General Motors Company; Hu Hu, Univ.
of Michigan-Dearborn; Urban De Souza,
Yuichiro Hirose, Mitsuru Enomoto, Takashi
Sasaki, Hino Motors, Ltd.; Eiichi Yasuda,
Masatoshi Hada, Toyota Central R&D
Labs Inc
Development of Intercooler Plastic Tank
Material Instead of Aluminum Die-Cast
BREAK
Integrating Manufacture Pre-stress in FEA
Based Road Load Fatigue Analysis
Influence of Road Roughness on the Ride
and Rolling Resistance for Passenger Car
(2013-01-1175)
(2013-01-1204)
(2013-01-0993)
Masakazu Atsumi, Masaru Urushihara,
DENSO Corp.; Yuji Munesawa, Kuraray
Co., Ltd.
Wenxin Qin, Chrysler Group LLC
Aref M. A. Soliman, South Valley University;
Mina M.S. Kaldas, IAE, TU Braunschweig;
Sayed A. Abdallah, Benha University
MATERIALS
MATERIALS
TIME
D0-03B
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
D0-06A
D0-05B
D0-05A
and Applications (Part 2 A):
Engineering (M109)
Performance (Part 4): Ride
Comfort (M107)
This session contains papers which
describe the use of modern automotive
composites in structural applications.
Design, process, and analytical
presentations are included, as well as
papers presenting results of bonding
strategies and techniques. Engineers
involved in the design and use of advanced
composites will find this session of
particular value.
fundamentals.
addressed.
Focusing on studies of driver behavior
modeling, driving simulator techniques, vehicle
ride comfort evaluation and enhancement,
test/simulation correlation analysis, vehicle
elastomeric component modeling (i.e.
bushings, rubber mounts, springs, dampers,
seat cushions), passive, semi-active and
active suspension systems, suspension seat
analysis and modeling techniques, the effect
and control of beaming, shaking, impact
harshness, brake judder and any other
phenomena affecting ride comfort of driver.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 10:20 a.m.
Organizers:
Somasekhar Bobba, GE India Technology
Center; Bruce N. Greve, General Motors
Vehicle Engineering Cntr.; Y Charles Lu,
University of Kentucky; Srikanth Pilla, Univ.
of Wisconsin-Madison; Richard Dale Tonda,
SEA, Ltd.
Organizers:
General Motors LLC
Organizers:
Mike Guo, Chrysler LLC; Guofei Chen,
United States Steel Corp.; Abolhassan
Khosrovaneh, GM; Zhigang Wei, Tenneco
Automotive Co., Ltd.; Guangtian Gavin
Song, AM General LLC; Yung-Li Lee,
Chrysler Group LLC
Organizers:
Jennifer Johrendt, Univ. of Windsor; Peijun
Xu, Ebco Inc.; Jingzhou James Yang, Texas
Tech. University
Chairpersons:
Sung Chul Cha, Hyundai Motor Group R&D; Qian Zou, Oakland University
Advanced Thermosetting Resin Matrix
Technology for Next Generation High
Volume Manufacture of Automotive
Composite Structures
Study of the Motion of Floating Piston Pin
against Pin Bore
Effect of Leaf Springs on Suspension and
Steering System
(2013-01-1176)
(2013-01-1215)
(2013-01-1203)
Roman Hillermeier, Tareq Hasson, Lars
Friedrich, Cedric Ball, Momentive Specialty
Chemicals Inc.
Ghassan Abed, Qian Zou, Gary Barber,
Oakland University; Ben Zhou, Yucong
Wang, Yuchuan Liu, Fanghui Shi, General
Motors Company
Murathan Soner, Olguncelik Company;
Metin Guven, Daimler; Gorkem Ozcelik;
Seray Goksel Tokgonul, Tolga Erdogus,
Mustafa Karaagac, Ahmet Kanbolat,
Olguncelik Company
Development of Polymer Composite Battery
Pack Case for an Electric Vehicle
Analysis of Oil Film Generation on the Main
Journal Bearing Using a Thin-Film Sensor
and Elasto-Hydrodynamic Lubrication (EHL)
Model
CAE Simulation of Door Sag/Set Using
Subsystem Level Approach
(2013-01-1177)
(2013-01-1217)
(2013-01-1199)
Chi-Hoon Choi, Jeong-Min Cho, Hyundai
Motor Company; Yongkil Kil, Yonghoon
Yoon, LG Hausys
Masatsugu Inui, Makoto Kobayashi,
Kensaku Oowaki, Takayoshi Furukawa,
Nissan Motor Co., Ltd.; Yuji Mihara,
Michiyasu Owashi, Tokyo City University
Roshan N. Mahadule, Tata Technologies
Ltd.; Sudhakar Doppalapudi, Chrysler
Group LLC
A Comparative Study on the Axial Impact
Performance of Jute and Glass Fiber-Based
Composite Tubes
Tribological Performance of ZnO-Oil
Nanofluids at Elevated Temperatures
Strength Analysis and Fatigue Life
Prediction of an Extra-Large Dump Truck
Deck and Subframe
(2013-01-1178)
(2013-01-1219)
(2013-01-1211)
Ashok Mache, Anindya Deb, Indian Institute
Of Science
Ionut C. Harta, Kayla Owens, Oakland
University; Steven De Jesús Santiago,
Universidad Del Turabo; David Schall,
Steven Thrush, Gary Barber, Qian Zou,
Oakland University
Jihoon Moon, Seunghun Ryu, Wookjin Na,
Hyundai Motor Company
2013 SRT Viper Carbon Fiber X-Brace
(2013-01-1775)
James Truskin, Leland Decker, Uday
Ramchander, Chrysler Group LLC; Jackie
Rehkopf, Plasan Carbon Composites
10:01
p.m.
Flexural Strength Properties of Teak Wood
Filled Rectangular Hollow Sectioned Thin
Steel Tube and its Application in Automobile
Investigating Hinge Crack Problem of a
Vehicle Hood by Integration of CAE and
RLD Analysis (Written Only -- No Oral
Presentation)
Robust Design Optimization of an Shock
Absorber for Enhancing Ride Performance
(2013-01-1179)
(2013-01-1214)
(2013-01-0995)
Bharatesh Danawade, Ravindra Malagi,
Gogte Institute of Technology, Belgaum;
Suprit Malagi, S.G. Balekundri Insti. of Tech.
Belgaum
Zhangyin Li, Zhengzhong Wang, Lei
Wang, Chunwei Rong, Kuaichu Fan, Chery
Automobile Co., Ltd.
Gang Tang, Han Zhao, Hefei University of
Technology; Manlong Peng, Jinglai Wu,
Yunqing Zhang, Huazhong University of
Science and Tech.
10:02
p.m.
Testing, Modelling and Analysis of a Linear
Magnetorheological Fluid Damper under
Sinusoidal Conditions (Written Only -- No
Oral Presentation)
(2013-01-0996)
H. Metered, S. Mostafa, S. El-Demerdash,
N. Hammad, M. El-Nashar, Helwan Univ
108
MATERIALS
TIME
D0-03 C&D
Sheet / Hydro / Gas Forming Technology and Modeling (Part
1 of 2) (M201)
The Sheet/ Hydro/ Gas Forming Technology and Modeling session is
designed to provide industrial and academic participants a forum to address
current technical issues in sheet metal forming using analytical, numerical and
experimental tools. This session will help to advance the state of the art in
sheet metal forming and lead to rapid dissemination of new technologies for
industrial applications.
8:00 a.m. - 11:20 a.m.
Organizers:
Xiaoming Chen, US Steel; Ghassan Kridli, Texas A&M Univ. at Qatar; S.
George Luckey, Ford Motor Co.; Krishna Murali, General Motors LLC; Thomas
Oetjens, Magna International; Michael J. Worswick, Univ. of Waterloo
8:00
a.m.
Formability Assessment of Al-6XXX-T4 Tubes for Hydroforming Applications
(Oral Only)
Yannis Korkolis, Univ. of New Hampshire
8:20
a.m.
Your Global Print and
book Resource
Deformation Mechanism of ERW Tubes in Newly Developed Bending Method
“PRB”
(2013-01-1168)
Osamu Sonobe, Yuji Hashimoto, Jiro Hiramoto, Toru Inazumi, JFE Steel Corp.
8:40
a.m.
Sheet Metal Forming Limits with Normal Pressure
(Oral Only)
Jieshi Chen, Shanghai Jiao Tong University
9:00
a.m.
Predicting Failure during Sheared Edge Stretching Using a Damage-Based
Model for the Shear-Affected Zone
(2013-01-1166)
Cliff Butcher, David Anderson, Michael Worswick, University of Waterloo
9:20
a.m.
Numerical Failure Prediction of the Hole Expansion Test using the GISSMO
Damage Model
(Oral Only)
David Anderson, University Of Waterloo
9:40
a.m.
The Influence of Edge Preparation Method on the Hole Expansion
Performance of Automotive Sheet Steels
(2013-01-1167)
Brandon M. Hance, Robert J. Comstock, Daniel K. Scherrer, AK Steel
Corporation
10:00
a.m.
Correlation Study on Parameters Affecting Springback Phenomenon in
Stamping Simulation
(2013-01-1169)
Sarin Babu Thokala, Sathya Narayanan, Naveed Ahamed, Deepak Ranjan
Bhuyan, Praveen Balaj Balakrishnan, Chrysler India Automotive Pvt Ltd;
Sathya Dev, Chrysler Group LLC
10:20
a.m.
Stock your bookshelf or e-reader
with technical, historical, and
enthusiast books available at the
SAE Bookstore. Buy an entire
e-book or an individual chapter
in the format that is compatible
with your smartphone, computer,
or e-reader.
Visit books.sae.org to
find your technical resources and
build your library today.
Die Wear Estimation in Automotive Sheet Metal Stamping
(2013-01-1171)
Praveen Balaj Balakrishnan, Chrysler India Automotive Pvt. Ltd.; Sathya Dev,
Chrysler Group LLC; Deepak Bhuyan, Parvez Syed, Sarin Babu Thokala,
Chrysler India Automotive Pvt. Ltd.
10:40
a.m.
Optimization of High-Volume Warm Forming for Lightweight Sheet
(2013-01-1170)
Nia R. Harrison, Andrey Ilinich, Peter A. Friedman, Ford Motor Company;
Jugraj Singh, Chrysler Group LLC; Ravi Verma, General Motors Company
11:00
a.m.
Deep Drawing by Indirect Hot Stamping
(2013-01-1172)
ZiQiang Sheng, Yuwei Wang, Tony Chang, Severstal North America Inc.;
Robert Miller, Evangelos Liasi, Ford Product Development
Order Today!
Online: books.sae.org
Phone: 1-877-606-7323 (U.S. and Canada only)
P110644
MATERIALS
TIME
D0-03B
D0-07A
D0-06A
Advances in Plastic Components,
Processes and Technologies
(M301)
and Test Methods (M104)
and Applications (Part 2 B):
Engineering (M109)
This session will cover a very broad range
of applications, processes and technologies
as the title suggests.
The focus of this session are the tests and
test methods employed in the evaluation
of the performance and durability of
powertrain (engines, transmissions),
driveline (4WD systems, driveshafts, axles),
chassis (frame, suspensions, brakes, etc.)
and body components, subsystems, and
full vehicle systems.
fundamentals.
addressed.
1:00 p.m. - 4:20 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 2:20 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Emile Homsi, DSM; Y Charles Lu, University
of Kentucky; Robert Maynard, Ticona;
Organizers:
Darryl S. Taylor, Boeing; Mike Temkin,
Chrysler Corp.
Organizers:
General Motors LLC
Organizers:
Abolhassan Khosrovaneh, GM; Mike
Guo, Chrysler LLC; Guofei Chen, United
States Steel Corp.; Guangtian Gavin Song,
AM General LLC; Zhigang Wei, Tenneco
Automotive Co., Ltd.; Yung-Li Lee, Chrysler
Group LLC
Chairpersons:
Yucong Wang, General Motors LLC;
Qingmin Yang, Federal-Mogul Corp.
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
D0-05B
Light Weight, Friction Down, Improved
Performance via new High Performance
Plastics from DSM in various automotive
applications
Statistical Method Tools to Analyze Ageing
Effects on Li-ion Battery Performances
Material Wear Evaluation using Temperature
Controlled Wear Testing
Correlations Among Monotonic Tensile
Properties and Simple Approximations That
Predict Strain-Controlled Fatigue Properties
of Steels
(Oral Only)
(2013-01-1429)
(2013-01-1218)
(2013-01-1213)
Bert Havenith, DSM
Anthony Barré, Frédéric Suard, CEA, LIST;
Mathias Gerard, Maxime Montaru, CEA,
LITEN; Delphine Riu, G2Elab, Grenoble INP
Saikrishna Sundararaman, FreudenbergNOK Sealing Technologies
Rafaa Esmaael; Vernon Fernandez,
Lawrence Technological University
The use of Stanyl ForTii in Lead Free
Solder Surface Mount Technology (SMT)
Applications.
Progress in Application of Portable
Accelerometer Based Measurement
Systems in Powertrain Performance Testing
Performed on Road
Accuracy Comparison of ARX and ANFIS
Model of PM Brake Lining Wear Behavior
Failure Analysis and Problem Solving of
Component Fatigue Tested Parts
(2013-01-1776)
(2013-01-1433)
(2013-01-1216)
(2013-01-1210)
Gregory Costantino, DSM Engineering
Plastics
Sebastian Brol, Opole University of
Technology
Ovun Isin, Ilyas Istif, Erdem Uzunsoy, Deniz
Uzunsoy, Yildiz Technical University
Tapash Dey, Tenneco Inc.; Bradley
Walworth, Tenneco Automotive Co Ltd
Recent Case Studies of Engineering
Thermosets for Under the Hood
Applications
The Effect of Suspension Types and Tuning
on Vehicle Durability
Identification of Dry Sliding Wear Behaviour
of B4C Particulate Reinforced Mg Matrix
Composites for Automobile Disk Brakes
Simulation and Test Correlation of Wheel
Radial Fatigue Test
(2013-01-1392)
(2013-01-1437)
(2013-01-1221)
(2013-01-1198)
Frank Bayerl, Sigrid ter Heide, Cedric A.
Ball, Momentive Specialty Chemicals Inc.
Dae-Un Sung, Eun-Joo Kim, June-Yeop
Kim, Chun Woo Shin, Won Wook Jung,
Hyundai-Kia Motors
Ilyas Istif, Ovun Isin, Erdem Uzunsoy, Deniz
Uzunsoy, Yildiz Teknik Universitesi
Mohammed Billal K, Chrysler India
Automotive Pvt Ltd; Thomas Oery, Chrysler
Technology Center; Raghuraman Taruvai
Sankaran, Anilkumar S Nesarikar, Chrysler
India Automotive Pvt Ltd
Evaluation of Anti Scratch Additives on
Polypropylene Compound
Pass by Noise Reduction on a Commercial
Vehicle
SEM Imaging at Multiple Voltages of Friction
Films
Strain Correlation Improvement in Fuel Tank
(2013-01-1391)
(2013-01-1432)
(2013-01-1220)
(2013-01-1207)
Mrunal R. Hatwalne, Tata Motors, Ltd.;
Prachi Joshi
Venkatesh Narayanan, Arunkumar S,
Muralidharan Chennakrishnan, Kalyankumar
Hatti, Ashok Leyland Technical Centre
M.A.Z. Vasconcellos, Physics Institute,
UFRGS; R. Hinrichs, Geosciences Institute,
UFRGS
Abhijit Londhe, Suhas Kangde, Mahindra &
Mahindra Ltd
Controlling Adhesion with Digital UV
Decorating Techniques
Self-Tuning Speed Tracking Controller for a
Portable Brake and Throttle Robot
Structural Evaluation of Light Weight
Aluminum Bedplate Design with Cast Iron
Inserts through CAE for High Density Diesel
Engine
(2013-01-1395)
(2013-01-1434)
(2013-01-1200)
Rory Wolf, Enercon Industries
David R. Mikesell, Ohio Northern University;
Anmol Sidhu, SEA Ltd
Vivek H Yadav, Krishnan Karthikeyan, Rahul
Murlidhar Kad, V. Vikraman, Mahindra &
Mahindra
Development of TPO Based Rear Bumper
Back Beam
Judder based on Sub Scale Test Machine
Concerning Facing
Panel Discussion: Durability Assessment
and Validation in Automotive Engineering
(2013-01-1396)
(2013-01-1436)
Chang Hee Sohn, Ok Kim, Yong Chun,
Hyundai MOBIS; Jong Wook Lee, Honam
Petrochemical Corp.
Ivan Scansani Gregori, Car Parts Inc. ZF do
Brazil; Walter Haertel Jr, ZF do Brasil
The purpose of the panel is to provide an
opportunity to discuss, clarify, evaluate
and exchange of viewpoints among the
automotive fatigue/durability experts. The
commonly used durability analysis, and test
validation processes/methodologies will be
discussed.
Panelists:
Abolhassan Khosrovaneh, GM
Xuming Su, Ford Motor Co.
110
TIME
D0-03B
D0-07A
D0-06A
Advances in Plastic Components,
Processes and Technologies
(M301)
and Test Methods (M104)
and Applications (Part 2 B):
Engineering (M109)
This session will cover a very broad range
of applications, processes and technologies
as the title suggests.
The focus of this session are the tests and
test methods employed in the evaluation
of the performance and durability of
powertrain (engines, transmissions),
driveline (4WD systems, driveshafts, axles),
chassis (frame, suspensions, brakes, etc.)
and body components, subsystems, and
full vehicle systems.
fundamentals.
addressed.
1:00 p.m. - 4:20 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 2:20 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Emile Homsi, DSM; Y Charles Lu, University
of Kentucky; Robert Maynard, Ticona;
Organizers:
Darryl S. Taylor, Boeing; Mike Temkin,
Chrysler Corp.
Organizers:
General Motors LLC
Organizers:
Abolhassan Khosrovaneh, GM; Mike
Guo, Chrysler LLC; Guofei Chen, United
States Steel Corp.; Guangtian Gavin Song,
AM General LLC; Zhigang Wei, Tenneco
Automotive Co., Ltd.; Yung-Li Lee, Chrysler
Group LLC
Chairpersons:
Yucong Wang, General Motors LLC;
Qingmin Yang, Federal-Mogul Corp.
3:00
p.m.
3:20
p.m.
D0-05B
A Study of Resin Overlay Bearing Material
for Recent Automotive Engines
Developing Generic Load Cases by Defining
Maximum Spindle Loads as a Function of
Corner Weight & Tire Sidewall Height
(2013-01-1394)
(2013-01-1435)
Hiroki Kobayakawa, Daido Metal Co., Ltd.;
Hideo Tsuji, Naohisa Kawakami, Colin
McAleese, Hiromitsu Katsuki, Kenta Kato,
Daido Metal Co Ltd
Jacob Szczudlak, Notre Dame University;
Mark Villaire, Rajesh Rao, Chrysler Group
LLC
Numerical Modeling of Preferential and
In-Line Heating of Semi-Transparent Thin
Polymers in Stretch Blow Molding and
Thermoforming Processes
(2013-01-1393)
Alain Malo, Zohir Benrabah, Francis
Thibault, Anna Bardetti, NRC-Automotive
3:40
p.m.
Thermo-Viscoelastic Model for Shrinkage
and Warpage Prediction During Cooling and
Solidification of Automotive Blow Molded
Parts
(2013-01-1397)
Zohir Benrabah, NRC Automotive; Hicham
Mir, Inergy Automotive Systems Research;
Yi Zhang, Ford Motor Company
4:00
p.m.
Measurement Method of Small Leakage
Rate for Fitted Metal Parts
(2013-01-1390)
Norimasa Hosonuma, Hidenori Arai, Yuuichi
Shutou, Nozomu Suzuki, Hirotaka Mizuta,
NOK Corporation
10:01
p.m.
Finite Element Analysis of Door Closing
Effort (Written Only -- No Oral Presentation)
Test Set-Up of BIW (Body in White) Stiffness
Measurements (Written Only -- No Oral
Presentation)
(2013-01-1398)
(2013-01-1439)
Peter Qiu, Yuan Qu, Shen Wu, Min Sun,
Chery Automobile Co., Ltd.
Karan R. Khanse, Shekhar P Pathak,
Mahindra & Mahindra
10:02
p.m.
Analysis of Damage Caused to Vehicle
Body Panels by Impacting Hail and Various
Tools and Objects (Written Only -- No Oral
Presentation)
(2013-01-1438)
Nikola Josevski, Andreas Sandvik, Chris
Jones, Tandy Pok, Tia Orton, Shane
Richardson, Delta-V Experts
MATERIALS
MATERIALS
TIME
D0-05A
1:00
p.m.
1:20
p.m.
D0-03 C&D
Optical Measurement and Nondestructive Testing Techniques in
Panel Discussion: Measurement and Analysis of Forming Limit
Diagrams Using DIC Techniques (Part 2 of 2) (M201)
Key words: optical techniques; digital correlation; holography; shearography; nondestructive
testing
The Sheet/ Hydro/ Gas Forming Technology and Modeling session is designed to
provide industrial and academic participants a forum to address current technical
issues in sheet metal forming using analytical, numerical and experimental tools. This
session will help to advance the state of the art in sheet metal forming and lead to
rapid dissemination of new technologies for industrial applications.
1:00 p.m. - 4:20 p.m.
1:00 p.m. - 3:30 p.m.
Organizers:
Sheng Liu, General Motors LLC; Kah Wah Long, Chrysler Group LLC; Lianxiang Yang, Oakland
University
Organizers:
Xiaoming Chen, US Steel; Ghassan Kridli, Texas A&M Univ. at Qatar; S. George
Luckey, Ford Motor Co.; Krishna Murali, General Motors LLC; Thomas Oetjens,
Magna International; Michael J. Worswick, Univ. of Waterloo
The Selection of Window in Spatial Phase Shift ESPI
Sheet Metal Stamping: Stretching Our Resources the Right Way
(2013-01-1420)
(Oral Only)
Nan Xu; Xin Xie; Xu Chen; Randy Gu, Oakland Univ; Lianxiang Yang, Oakland University
Lorenzo Smith, Oakland Univ.
High-Speed Inline Production Testing of Cast Pistons Using 3D-CT and a Digital X-Ray
Detector
(2013-01-1426)
Oliver Scholz, Steven Oeckl, Matthias Kube, Fraunhofer IIS
1:40
p.m.
Tensile Material Properties of Fabrics for Vehicle Interiors from Digital Image Correlation
Panel Discussion: Measurement and Analysis of Forming Limit Diagrams Using DIC
Techniques
(2013-01-1422)
Vesna Savic, Louis Hector, General Motors LLC
Digital image correlation (DIC) techniques are increasingly being applied by engineers
and researchers at automotive OEM’s, Tier 1’s, sheet suppliers, research laboratories
and universities to characterize sheet metal formability. DIC enables improvements
in strain measurement efficiency and accuracy directly supporting the development
of more robust formability metrics such as forming limit diagrams (FLD’s). While
DIC results are commonly used by stamping researchers and engineers to support
product and manufacturing feasibility, there are no generally accepted industry test
specifications and methods. This panel discussion will review DIC technology and
applications as well as consider next steps toward industry standardization.
Panelists:
Changqing Du, Chrysler Group LLC
Jidong Kang, CanmetMATERIALS
Ming F. Shi, United States Steel Corp.
Dan Zeng, Ford Motor Company
Gang Huang, Arcelor Mittal USA
Thomas Stoughton, General Motors LLC
John Tyson, Trilion Quality Systems
Cedric Xia, Ford Motor Co
Mark Iadicola, National Institute Standards & Tech
Lianxiang Yang, Oakland University
2:00
p.m.
Optical Measurement Techniques from Materials to Manufacturing
(Oral Only)
John Tyson, Trilion Quality Systems
2:20
p.m.
Forming Limit Measurement Using a Multi-Sensor Digital Image Correlation System
(2013-01-1423)
Xu Chen, Nan Xu, Xin Xie, Lorenzo Smith, Lianxiang Yang, Oakland University
2:40
p.m.
Advancements in Digital Image Correlation Opening a New Range of Measurement Capabilities
(Oral Only)
Matt J. Crompton, Dantec Dynamics
3:00
p.m.
A New Method for Determination of Forming Limit Diagram Based on Digital Image Correlation
(2013-01-1421)
Ling Zhang, Jianping Lin, Tongji Univ.; Li Sun, General Motors China Science Lab; Chen Wang,
Li Wang, Baosteel Group Corp
3:20
p.m.
Improving Material Property Measurement by Using Multi-Camera Digital Image Correlation
(2013-01-1428)
Caleb P. Chovan, Grove City College; Betelhem Mengiste, University of Maryland Eastern
Shore; Xu Chen, Lianxiang Yang, Laila Guessous, Oakland University
3:40
p.m.
Constitutive Model of Ti40 Alloy Sheet Based on DIC Measurement
(2013-01-1427)
Jianhua Jiang, Tongji Univ.; Houmin Wang, Junhai Gu, shanghai aero plane manufacturing co
4:00
p.m.
Fatigue Life Prediction of Rubber Bushing in Engine Cradle
(2013-01-1425)
Mingxia Fang, Tongji University; Jianghong Chen, United Automotive Electronic Sys Co. Ltd
Planned by Materials Modeling and Testing Committee / Materials Engineering Activity
The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00337,
and also individually. To purchase visit collections.sae.org
112
MATERIALS
Materials
EXHIBITOR LIST
AutoHarvest Foundation...................M1321
Bulk Molding Compounds Inc...............701
Core Molding Technologies Inc............1006
DSM..................................................1214P
Eastman Chemical................................807
Element Materials Technology...............503
Evonik Industries AG.............................213
Fujipoly America Corp...........................929
Granta Design.......................................419
Grail Engine Technologies......................502
Henkel...................................................307
Hitachi Metals America, Ltd.................1000
Luvata Appleton....................................531
Prestolite Wire, A General Cable
Company...........................................418
Samsung Ind Co Ltd...........................1139
Sekisui S-LEC America, LLC...............1107
Co Ltd................................................437
Twintec Technologie..............................733
Victrex Polymer Solutions....................615P
Whitlam Label Company, Inc.................908
Yantai Zhenghai Magnetic Material
Co Ltd..............................................1025
Save the Date!
SAE 2013
31st Annual
Brake
Colloquium
& Exhibition
October 6-9, 2013
Sawgrass Marriott Resort
& Beach Club
Jacksonville, Florida USA
sae.org/brake
The 31st Annual SAE Brake
Colloquium & Exhibition
will bring together renowned
brake industry experts from
around the world to learn
about, present and display the
latest scientific discoveries and
technological innovations in
brake materials, components,
systems, testing, modeling and
aftermarket solutions.
Exhibit – Sponsor – Attend
P126139
POWERTRAIN/PROPULSION
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Advanced Battery Technologies (Part 1 - 4) (PFL103)
-
-
4
4
4
4
O2-44
Advanced Fuel Cell Vehicle Applications (PFL101)
-
4
-
-
-
-
O2-33
Advanced Hybrid and Electric Vehicle Powertrains (Part 1 - 4)
(PFL100)
-
-
4
4
4
4
O2-33
4
4
-
-
-
-
O2-44
134, 138,
150, 152,
123
116, 130,
138, 145,
152
116, 123
4
-
-
-
-
-
W2-66
116
4
-
-
-
-
W2-66
123
Advanced Vehicle Technology Competitions (Part 1 & 2) (PFL110)
Page No.
Alternative and Advanced Fuels
(Part 1 of 3) Other Alternative Fuels (PFL215)
(Part 2 of 3) Alcohol (PFL215)
-
(Part 3 of 3) Biodiesel (PFL215)
-
-
4
-
-
-
W2-66
130
CI & SI Power Cylinder Systems (PFL502)
Chat with the Expert - LD/HD Control, Calibration, and OBD
(PFLCHAT310)
Chat with the Expert: Propane Autogas – The Other Gaseous Fuel
(PFLCHAT240)
Chat with the Experts: Communicating Lubricant and Hardware
requirements, limitations and mutual performance expectations;
Are we getting our specifications right? (PFLCHAT520)
Cold Start and Transients (PFL211)
4
-
-
-
-
-
W2-67
116
-
-
-
4
-
-
W2-69
144
-
4
-
-
-
-
W2-66
129
-
4
-
-
-
-
W2-68
129
-
-
-
-
-
4
W2-68
Combustion Control and Optimization (Part 1 - 3) (PFL303)
4
4
4
4
4
4
-
-
-
W2-70
-
-
-
-
W2-63
152
116,123,
130
118,125
-
-
-
-
-
W2-68
118, 119
-
-
4
4
W2-70
145, 152
-
W2-67
130, 138
118, 125
132, 145,
154
132, 133
138, 145,
154
Direct Injection SI Engine Technology (Part 1 & 2) (PFL202)
Driveline and Crankcase (PFL506)
Electric Motor & Power Electronics (Part 1 & 2) (PFL104)
-
-
Engine Boosting Systems (Part 1 & 2) (PFL501)
-
-
4
4
-
4
4
-
-
-
-
W2-69
-
-
-
-
4
4
W2-66
-
-
4
-
-
-
W2-63
Fuel Injection and Sprays (Part 1 - 3) (PFL210)
-
-
-
4
4
4
W2-65
Heat Transfer and Advances in Thermal & Fluid Sciences In-cylinder Heat Transfer, Cooling and Exhaust Systems (Part 1 &
2) Engine Heat Transfer (PFL214)
-
-
-
-
4
4
W2-64
High Efficiency IC Engines (Part 1 - 3) (PFL216)
-
4
4
-
-
W2-64
Hydrogen IC Engines (PFL102)
Kinetically Controlled CI Combustion (Including HCCI) (Part 1 & 2)
(PFL206)
Mixing-Controlled CI Combustion
(Part 1 of 3) Emissions and Efficiency for Conventional and
Low-Temperature Combustion (PFL204)
(Part 2 of 3) In-Cylinder Processes (PFL204)
-
-
-
4
4
-
-
W2-70
-
-
-
-
4
4
W2-65
4
-
-
-
-
-
W2-65
118
-
4
-
-
-
-
W2-65
125
-
-
4
-
-
-
W2-65
136
Engine Flows and Combustion Diagnostics (Part 1 & 2) (PFL212)
Fuel & Additive Effects on CI Engine Performance (Part 1 & 2)
(PFL205)
Fuel & Additive Effects on SI Engine Performance (PFL203)
(Part 3 of 3) Fuel Effects (PFL204)
114
147, 154
125, 132,
140
140, 141
147, 148,
154
Wed
PM
Modeling of SI and Diesel Engines - Diesel Combustion (PFL208)
-
Modeling of SI and Diesel Engines - Models for Controls (PFL208)
-
Modeling of SI and Diesel Engines Modeling of SI and Diesel Engines and Mechanical Systems (PFL208)
Modeling of SI and Diesel Engines Engine Modeling (PFL208)
Modeling of SI and Diesel Engines Fundamentals (PFL208)
Thur
AM
PM
AM
PM
Room No.
Page No.
4
-
-
-
-
W2-61
129
-
4
-
-
-
W2-61
132
-
4
-
-
-
-
W2-61
120, 127
-
-
-
4
-
-
W2-61
140, 141
-
-
4
-
-
-
W2-61
136, 137
4
-
-
-
-
-
W2-61
120, 121
4
4
4
-
-
W2-64
Natural Gas Engines and Vehicles (PFL106)
-
-
-
-
-
W2-70
New CI & SI Engines and Components (Part 1 - 3) (PFL500)
-
-
4
4
4
4
4
-
W2-68
Panel - Fuels & Lubricants Council Open Forum -- The Next
General of Passenger Car Engine Oil, ILSAC GF-6 (PFL510)
-
4
-
-
-
-
W2-68
127
4
-
-
-
-
-
O2-43
120
(Part 1 of 3) Engine Control & Calibration (PFL300)
-
-
-
4
-
-
W2-69
142
(Part 2 of 3) Powertrain Systems Control (PFL300)
-
-
-
-
4
-
W2-69
147, 148
(Part 3 of 3) Emission Control (PFL300)
-
-
-
-
-
4
W2-69
156
-
-
-
-
4
-
W2-61
147, 148
(Part 1 of 3) Basic Combustion, Efficiency & Knock (PFL201)
-
-
-
4
-
-
W2-63
142
(Part 2 of 3) Alternative Fuels (PFL201)
-
-
-
-
4
-
W2-63
150
(Part 3 of 3) Ignition and Pre-Ignition (PFL201)
-
-
-
-
-
4
W2-63
156
4
-
-
-
-
-
W2-67
122
-
-
-
4
-
-
O2-35/36
142
4
SI Combustion (PFL208)
System Modeling, Hydraulic
Thermodynamics and General
Turbocharging &
Multi-Dimensional Engine Modeling (Part 1 - 4) (PFL209)
Powertrain Actuators and Sensors (PFL302)
120, 127,
132, 140
134, 135
134, 142,
150
Powertrain Control & Calibration
Powertrain NVH (PFL504)
SI Combustion
Small Engine Technology (PFL503)
Transmission and Driveline: All Wheel Drive (PFL602)
Transmission and Driveline: Components/Subsystems (PFL607)
-
-
-
-
-
O2-35/36
122
Transmission and Driveline: Controls (PFL604)
-
4
-
-
-
-
O2-35/36
127
Transmission and Driveline: IVT / CVT (PFL603)
-
-
-
4
-
-
O2-35/36
144
4
-
-
-
-
-
O2-35/36
120
Transmission and Driveline: Modeling (PFL608)
-
-
4
-
-
-
O2-35/36
134
Transmission and Driveline: NVH (PFL606)
-
4
-
-
-
-
O2-35/36
129
Transmission and Driveline: Transmission Systems/Drive Unit (PFL600)
-
-
-
-
4
-
O3-45
150
Variable Valve Actuation (PFL304)
-
-
-
-
-
4
O2-35/36
156
Transmission and Driveline: Launch Devices (PFL605)
Propulsion/Powertrain Notepads
Sponsored by
Tues
AM
TIME
O2-44
10:10
a.m.
10:30
a.m.
10:50
a.m.
W2-70
(Part 1 of 3) Other Alternative
Fuels (PFL215)
CI & SI Power Cylinder Systems
(PFL502)
Combustion Control and
Optimization (Part 1 of 3)
(PFL303)
The EcoCAR 2: Plugging in to the Future
student vehicle competition, sponsored by
General Motors and the U.S. Department
of Energy, tasks university teams with
designing, implementing and refining
advanced powertrains into a conventional
midsize sedan. This session presents yearly
results from teams in the competition,
highlighting the entire EcoCAR vehicle
development process.
This session focuses on the fundamental
properties of fuels and methods for
measuring these properties, as well
as issues related to fuel storage and
transportation. Examples include diesel
fuel lubricity determination, fuel effects
on deposits, cold weather issues, and
environmental and toxicological impacts of
new fuels
This session covers topics regarding the
Power Cylinder (piston, piston rings, piston
pins, connecting rods). The papers include
information on how to reduce friction and
improve fuel economy, how to improve
durability by understanding wear, and how
to improve oil consumption and blow-by.
This session covers engine combustion
control and optimization techniques related
to achieving stringent market fuel economy,
emissions, and performance. Related topics
include engine combustion diagnostics,
control, optimization, related combustion
sensing, etc.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 10:50 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Brian Benoy, Kristen G. De La Rosa, Patrick
M. Walsh, Argonne National Laboratory
Organizers:
William P Attard, MAHLE Powertrain LLC;
Barbara Goodrich, John Deere Product
Engineering Center; George Karavalakis,
University of California, Riverside; James
Lyons, Sierra Research Inc.; Elisa Toulson,
Michigan State Univ.
Organizers:
Yong-Ching Chen, Dwight Doig, Dan
Richardson, Cummins Inc.
Organizers:
Nilabh Srivastava, Univ. of North Carolina;
Elisa Toulson, Michigan State Univ.; YueYun Wang, General Motors; Fengjun Yan,
McMaster Univ.; Xiaojian Yang, Delphi
Corporation; Guoming G. Zhu, Michigan
State Univ.
Moderators:
Patrick Walsh, Argonne National Laboratory
9:50
a.m.
W2-67
Advanced Vehicle Technology
Competitions (Part 1 of 2)
(PFL110)
Chairpersons:
9:30
a.m.
W2-66
Chairpersons:
Elisa Toulson, Michigan State University
Key Outcomes of Year One of EcoCAR 2:
Plugging In To The Future
Alternative Diesel Fuel Combustion
Acceptance Criteria for New Fuels in
Legacy Diesel Engines
Benefits of Thermal Spray Coatings in
Internal Combustion Engines, with Specific
View on Friction Reduction and Thermal
Management
Fuel and Immission Potential of Context
Aware Engine Control
(2013-01-0554)
(2013-01-1135)
(2013-01-0292)
(2013-01-0306)
Nicole Lambiase, Brian Benoy, Kristen De
La Rosa, Argonne National Laboratory;
Vahid Motevalli, Purdue University; George
Molen, Mississippi State University; Douglas
Nelson, Virginia Tech; Robert Alley, Patrick
Walsh, Argonne National Laboratory
Jim Cowart, Len Hamilton, US Naval
Academy; Sherry Williams, Andrew
McDaniel, US Navy
Urban Morawitz, Jan Mehring, Ford Werke
GmbH; Leander Schramm, KS AluminiumTechnologie GmbH
Benjamin Pla, Universidad Politecnica de
Valencia; Harald Waschl, Luigi del Re,
Johannes Kepler University Linz; Carlos
Guardiola, Universidad Politecnica de
Valencia
Designing a High Voltage Energy Storage
System for a Parallel-Through-The-Road
Plug-In Hybrid Electric Vehicle
Developing Direct Injection Systems to Use
Ammonia in Spark Ignition Engine
A Non-Linear Finite Element Approach
Applied to Diesel Piston Combustion Bowl
Rim Strength Assessment
Effects of Direct-Current (DC) Electric Fields
on Flame Propagation and Combustion
Characteristics of Lean Premixed CH4/O2/
N2 Flames
(2013-01-0557)
(Oral Only)
(2013-01-0293)
(2013-01-0309)
Bryan Whitney Belt, Adam Fogarty, Kevin
Oswald, Gregory Shaver, Peter Meckl, Vahid
Motevalli, Purdue University
George Zacharakis-Jutz, Song-Charng
Kong, Iowa State University
William Morgan, Morgan Design Analysis,
Ltd.; Simon Barnes, SB2 Metallurgical
Services; Kwan Ho Ryu, Dong Yang Piston
Co Ltd; Sanghyuk Jun, Wooseok Shim,
Dong Yang Piston Co. Ltd.
Xiangwen Meng, Xiaomin Wu, Jie Liu, Chan
Kang, Xing Yang, Zhongquan Gao, Xi’an
Jiaotong University, Xi’an，China
The University of Waterloo Alternative Fuels
Team’s Approach to EcoCAR 2
Effects of Fuel Compositions on Diesel
Engine Performance Using Ammonia-DME
Mixtures
Measuring Lubricant Films at the PistonCylinder Contact: An Overview of Current
Technologies with Focus on Ultrasound
Effect of Air Filter Condition on Diesel
Vehicle Fuel Economy
(Oral Only)
(2013-01-1133)
(2013-01-0294)
(2013-01-0311)
Gurhari Preet Singh, University of Waterloo
Kyung Hyun Ryu, Kunsan National
University; George Zacharakis-Jutz, SongCharng Kong, Iowa State University
Robin Mills, Emin Yusuf Avan, Rob DwyerJoyce, The University of Sheffield
John Thomas, Brian West, Shean Huff, Oak
Development of a Parallel Through the
Road Plug-in Hybrid Electric Vehicle for the
EcoCAR2 Competition
Influence of Different Natural Gas
Compositions on the Regulated Emissions,
Aldehydes, and Particle Emissions from a
Transit Bus
Projection Behavior of Piston Rings in
Cylinder Ports of a Two-Stroke Cycle Engine
Control of Fuel Octane for Knock Mitigation
on a Dual-Fuel Spark-Ignition Engine
(Oral Only)
(2013-01-1137)
(2013-01-0295)
(2013-01-0320)
Trevor A. Fayer; Richard Wurden; Trevor
Crain; Joshua Wilke
George Karavalakis, Nicholas Gysel,
Maryam Hajbabaei, Thomas Durbin,
Kent Johnson, Wayne Miller, University of
California, Riverside
Kohei Nakashima, Yoshio Murakami,
Masago Yamamoto, Soichi Ishihara, Meijo
Univ.
Jacob Baranski, Eric Anderson, Keith
Grinstead, John Hoke, Innovative Scientific
Solutions Inc.; Paul Litke, Air Force
Research Laboratory
Vehicle System Design Process for a Series- Study on Ignition Delay Times of DME and
Parallel Plug-in Hybrid Electric Vehicle
n-Butane Blends
Investigation of Robustness Control for
Practical Use of Gasoline HCCI Engine
(Oral Only)
(2013-01-1146)
(2013-01-0323)
P. Christopher Manning, Eli White, R. Jesse
Alley, Jonathan King, Douglas J. Nelson,
Virginia Tech
Erjiang Hu, Zuohua Huang, Xue Jiang,
Jiaxiang Zhang, Xi’an Jiaotong University
Kenichiro Ogata, Hitachi,Ltd.
11:10
a.m.
Reduction of Cycle-by-Cycle Variations
and Extension of Lean Limit of Operation
in a Small Single Cylinder Gasoline Engine
through Valve Timing Changes
(2013-01-0325)
Karunaharan Vythilingam, V
Lakshminarasimhan, TVS Motor Co., India;
A Ramesh, Indian Institute of Technology
Madras
116
TIME
O2-44
W2-66
W2-67
W2-70
Competitions (Part 1 of 2)
(PFL110)
(Part 1 of 3) Other Alternative
Fuels (PFL215)
CI & SI Power Cylinder Systems
(PFL502)
(PFL303)
The EcoCAR 2: Plugging in to the Future
student vehicle competition, sponsored by
General Motors and the U.S. Department
of Energy, tasks university teams with
designing, implementing and refining
advanced powertrains into a conventional
midsize sedan. This session presents yearly
results from teams in the competition,
highlighting the entire EcoCAR vehicle
development process.
new fuels
This session covers topics regarding the
Power Cylinder (piston, piston rings, piston
pins, connecting rods). The papers include
information on how to reduce friction and
improve fuel economy, how to improve
durability by understanding wear, and how
to improve oil consumption and blow-by.
sensing, etc.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 10:50 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Organizers:
Organizers:
Yong-Ching Chen, Dwight Doig, Dan
Richardson, Cummins Inc.
Organizers:
Corporation; Guoming G. Zhu, Michigan
State Univ.
Chairpersons:
Moderators:
10:01
p.m.
10:02
p.m.
Chairpersons:
Elisa Toulson, Michigan State University
Using Mix of Gasoline and Liquefied
Petroleum Gas for Lower Emissions and
Greater Torque (Written Only -- No Oral
Presentation)
Effect of Design Features on Dynamic
Characteristics of VCC Piston for I.
C. Engine (Written Only -- No Oral
Presentation)
(2013-01-1151)
(2013-01-0296)
Max Beresnev, Alex Beresnev, Southern
Federal Univesity, Russia
Jian Dong, Lin Ouyang, Yue Zhou, Yuhai
He, Qingchuan Pan, Wuhan Univ of
Technology
Design of DME-Diesel Fuel Supply System
for Non-Gasification (Written Only -- No Oral
Presentation)
(2013-01-1152)
Jian Dong, Wuhan Univ. of Technology;
Qingchuan Pan, Zhixiang Pan, Dong Yang,
Wuhan University of Technology (WUT)
Planned by Advanced Power Sources
Committeee / Powertrain Fuels and
Lubricants Activity
Planned by Combustion and Fuels
Committee / Powertrain Fuels and
Lubricants Activity
Planned by Lubricants and Powertrain
Systems Committee / Powertrain Fuels and
Lubricants Activity
Planned by Control and Calibration
Lubricants Activity
Mark your Calendar
SAE/KSAE 2013 International Powertrains,
Fuels & Lubricants Meeting
October 21 – 23, 2013
Seoul, Korea
http://www.sae.org/events/pfl
TIME
W2-63
W2-68
W2-69
W2-65
Direct Injection SI Engine
Technology (Part 1 of 2) (PFL202)
Driveline and Crankcase (PFL506) Engine Flows and Combustion
Diagnostics (Part 1 of 2) (PFL212)
(Part 1 of 3) Emissions and
Efficiency for Conventional and
Low-Temperature Combustion
(PFL204)
Focuses on SI combustion technologies
that employ direct, in-cylinder fuel injection.
Topics of particular interest include incylinder fuel injection and spray studies,
flow/spray interaction and in-cylinder
mixture formation studies, and combustion
chamber shape optimization. Focus
includes ‘stratified’ operation or other
modes enabled by DI hardware, DI-specific
emissions issues such as particulates and
smoke, and technologies enabled by DISI
(such as downsizing).
The industry continues to work on
understanding the interaction of lubricating
fluids with engine hardware in order to
improve vehicle efficiency, durability, and
performance. The Engine Lubricants
Session presents a variety of papers
dealing with advances in engine oils and
their relationship to improved hardware
performance.
This session focuses on applying various
sensors and diagnostics to examine
the flow and combustion processes in
both production engines and research
environments. Examples of diagnostics
of interest include, but are not limited to:
pressure sensors, ion probes, exhaust gas
composition analyzers, and various optical
techniques.
Features CI combustion technologies
distinguished by 1) mixing processes that
influence combustion; and 2) combustion
phasing closely coupled to the timing of
fuel injection. Includes the impact of the
fuel injection and jet-mixing processes (e.g.
multiple injection strategies, group-hole/
complex injector geometries); impact of
swirl/spray targeting on mixing processes;
combustion chamber/engine geometry
optimization; sources of combustion
inefficiency; and the impact of operating
conditions.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:30 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Matthew Brusstar, U.S. Environmental
Protection Agency; Sudhakar Das,
SwRI; Gerald Micklow, Florida Institute
of Technology; James W G Turner, Lotus
Engineering, Ltd.; Jianwen Yi, Ford Motor
Co.
Organizers:
Siddhartha Asthana, Chem-Trend Inc.; Ewa
Alice Bardasz, Chris McFadden, Lubrizol
Corp.; Timothy P. Newcomb, BorgWarner
Inc.; Richard Vickerman, Lubrizol Corp.
Organizers:
Oivind Andersson, Lund Univ.; Matthew
J. Hall, Univ. of Texas-Austin; Benjamin
Petersen, Sandia National Laboratories
Organizers:
Jose M Garcia, Universidad Politecnica de
Valencia; Song-Charng Kong, Iowa State
University; Budhadeb Mahakul, DEERE &
CO; Robert McDavid, Caterpillar Inc.; Mark
Musculus, Sandia National Laboratories;
Raul Payri, Universidad Politecnica de
Valencia; Stefan Simescu, Southwest
Research Institute; Dale R. Tree, Brigham
Young Univ.; Rishikesh Venugopal, Achates
Power Inc.; John F. Wright, Cummins Inc.;
Yong Yi, Caterpillar Inc.; Ming Zheng, Univ.
of Windsor
Chairpersons:
Rishikesh Venugopal, Achates Power Inc;
Valencia
9:30
a.m.
9:50
a.m.
10:10
a.m.
10:30
a.m.
Study of E10 and E85 Effect on Air Fuel
Mixing and Combustion Process in Optical
Multicylinder GDI Engine and in a Spray
Imaging Chamber
Lubricants for (Hybrid) Electric
Transmissions
An Experimental Study of Gaseous
Transverse Injection and Mixing Process in a
Simulated Engine Intake Port
Effects of Mixing and Chemical Parameters
on Homogeneous Charge Induced Ignition
Combustion Based on a Light-Duty Diesel
Engine with Ultra-Low NOx and Soot
Emissions and High Thermal Efficiency
(2013-01-0249)
(2013-01-0298)
(2013-01-0561)
(2013-01-0914)
Luigi Allocca, Francesco Catapano,
Alessandro Montanaro, Paolo Sementa,
Bianca Maria Vaglieco, Istituto Motori CNR
Tom Hong-Zhi Tang, Mark Devlin, Naresh
Mathur, Timothy Henly, Lee Saathoff, Afton
Chemical Corp.
Hua Wang, Lucio Araneo, Aldo Coghe,
Politecnico di Milano
Wenbin Yu, Zhiqiang Kang, Wei Guo, Jichun
Liu, Weibo Zhao, Zhiyong Zhang, Haipeng
Lai, Feng Bian, Wei Qu, Qingdang Wang,
Dingwei Gao, Chunhui Zhang, Great Wall
Motor Engine R&D Center; Jianxin Wang,
Chao Yu, Tsinghua University, China
Optimised Neat Ethanol Engine with
Stratified Combustion at Part-load; Particle
Emissions, Efficiency and Performance
Correlation of the Sequence VID Laboratory
Fuel Economy Test to Real World Fuel
Economy Improvements
Simultaneous Measurements of In-Cylinder
Temperature and Velocity Distribution
in a Small-Bore Diesel Engine Using
Thermographic Phosphors
Effects of Charge Density and Oxygen
Concentration on Thermal Efficiency and
Emissions in a Heavy-Duty Diesel Engine
under High Load Operations
(2013-01-0254)
(2013-01-0297)
(2013-01-0562)
(2013-01-0895)
Jonas Warnberg, Chalmers Univ. of
Technology; Marius Boehmer, RWTH
Aachen University; Ingemar Denbratt,
Chalmers Univ of Technology
Gregory Guinther, Afton Chemical Corp.;
Jeremy Styer, Afton Chemical Corporation
Nicholas James Neal, Jonny Jordan, David
Rothamer, University of Wisconsin-Madison
Yingying Lu, Wenbin Yu, Yiqiang Pei,
Wanhua Su, State Key Laboratory of
Engines, Tianjin
In-Cylinder Particulate Matter and Spray
Imaging of Ethanol/Gasoline Blends in a
Direct Injection Spark Ignition Engine
The Fuel Economy / Oil Durability Dilemma
High Resolution In-Cylinder Scalar Field
Measurements during the Compression and
Expansion Strokes
The Potential of Fuel Metering Control for
Optimising HC Emissions in Diesel Low
Temperature Combustion
(2013-01-0259)
(Oral Only)
(2013-01-0567)
(2013-01-0894)
Mohammad Fatouraie, Margaret
Wooldridge, University of Michigan; Steven
Wooldridge, Ford Motor Co.
Gregory Guinther, Afton Chemical Corp.
Yizhou Zhang, University of WisconsinMadison; David Jesch, Budapest University
of Technology; Jason Oakley, Jaal Ghandhi,
University of Wisconsin-Madison
Oluwasujibomi M. Sogbesan, Martin H.
Davy, Colin P. Garner, Loughborough
University
Application of Supercritical Gasoline
Injection to a Direct Injection Spark Ignition
Engine for Particulate Reduction
Development of Long Haul Heavy
Duty Vehicle Real World Fuel Economy
Measurement Technique
High-Speed Particle Image Velocimetry
Study of In-Cylinder Flows with Improved
Dynamic Range
Studies on the Impact of 300 MPa Injection
Pressure on Engine Performance, Gaseous
and Particulate Emissions
(2013-01-0257)
(2013-01-0330)
(2013-01-0542)
(2013-01-0897)
Chris De Boer, Transonic Combustion
Inc.; Gary Bonar, Shizuo Sasaki, Shreeram
Shetty, Transonic Combustion Inc
Wayne Moore, Mike Sutton, Kieron
Donnelly, Lubrizol Ltd
Preeti Abraham, David Reuss, Volker Sick,
Krishna Natti, Abhimanyu Sinha, Christian
Hoerter, Per Andersson, Ricardo Inc.; Jon
Andersson, Ricardo UK; Craig Lohmann,
Drew Schultz, Nam Hyo Cho, Richard
Winsor, John Deere Power Systems
118
TIME
W2-63
W2-68
W2-69
W2-65
Driveline and Crankcase (PFL506) Engine Flows and Combustion
(Part 1 of 3) Emissions and
Efficiency for Conventional and
Low-Temperature Combustion
(PFL204)
The industry continues to work on
understanding the interaction of lubricating
fluids with engine hardware in order to
improve vehicle efficiency, durability, and
performance. The Engine Lubricants
Session presents a variety of papers
dealing with advances in engine oils and
their relationship to improved hardware
performance.
techniques.
conditions.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:30 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:30 a.m.
Organizers:
Co.
Organizers:
Siddhartha Asthana, Chem-Trend Inc.; Ewa
Alice Bardasz, Chris McFadden, Lubrizol
Corp.; Timothy P. Newcomb, BorgWarner
Inc.; Richard Vickerman, Lubrizol Corp.
Organizers:
Petersen, Sandia National Laboratories
Organizers:
of Windsor
Chairpersons:
Rishikesh Venugopal, Achates Power Inc;
Valencia
10:50
a.m.
11:10
a.m.
Systematic Analysis and Particle Emission
Reduction of Homogeneous Direct Injection
SI Engines
The Effect of Low Viscosity Oil on the Wear,
Friction and Fuel Consumption of a Heavy
Duty Truck Engine
Investigations of Spray Induced Vortex
Structures during Multiple Injections of a
DISI Engine in Stratified Operation using
High-Speed-PIV
Post Injections for Soot Reduction in
Diesel Engines: A Review of Current
Understanding
(2013-01-0248)
(2013-01-0331)
(2013-01-0563)
(2013-01-0917)
Florian Steimle, Andre Kulzer, Herwig
Richter, Dietmar Schwarzenthal, Claudia
Romberg, Porsche AG
Phil Carden, Carl Pisani, Jon Andersson,
Ricardo UK Ltd; Ian Field, Emmanuel Lainé,
Infineum UK Ltd; Jai Bansal, Maryann
Devine, Infineum USA LP
Christian Disch, Heiko Kubach, Ulrich
Spicher, Karlsruhe Institute of Technology
(KIT); Jürgen Pfeil, MOT GmbH; Frank
Altenschmidt, Uwe Schaupp, Daimler AG
Jacqueline O’Connor, Mark Musculus,
Development of DISI Engine Utilizing a FanShaped Spray Jet
Determination of Fuel Contamination in
Lubricant Oil Through Gravimetric Method
Reexamination of Multiple Fuel Injections
for Improving the Thermal Efficiency of a
Heavy-Duty Diesel Engine
(2013-01-0260)
(2013-01-0332)
(2013-01-0909)
Eriko Matsumura, Mutsumi Kanda,
Fumiaki Hattori, Hiroshi Nomura, Susumu
Hashimoto, Toyota Motor Corp.; Kiyotaka
Yoshimaru, Denso Corp.
Kamilla de Lima Ribeiro, Fernanda Oliveira
Silva, Caterina Elena De Santis, Akira Luiz
Nakamura, Fiat Brasil
Hideaki Osada, Noboru Uchida, Kazuaki
Shimada, Yuzo Aoyagi, New Ace Inst.
Co., Ltd.
10:01
p.m.
Impact of Viscosity Modifiers on Gear Oil
Efficiency and Durability: Part II (Written Only
(2013-01-0299)
William Barton, Lubrizol, Ltd.; Daniel Jason
Knapton, Mark Baker, Lubrizol Corp.;
Andrew Rose, Lubrizol, Ltd.; Elizabeth A.
Schiferl, Lubrizol Corp.; Michael Huston,
Lubrizol Corporation; Gareth Brown,
Lubrizol, Ltd.; Gregory Hunt, The Lubrizol
Corporation
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
SAE Technical Paper Collection, COLLTP-00346 and COLL-TP-00348, and also
individually. To purchase visit collections.
sae.org
TIME
W2-61
9:30
a.m.
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
W2-64
O2-43
O2-35/36
Modeling of SI and Diesel Engines Multi-Dimensional Engine
- Turbocharging & Fundamentals
(PFL208)
Powertrain Actuators and
Sensors (PFL302)
Transmission and Driveline:
Launch Devices (PFL605)
Zero-dimensional, one-dimensional, and
quasi-dimensional models for simulation of
SI and CI engines with respect to: engine
breathing, boosting, and acoustics; SI
combustion and emissions; CI combustion
and emissions; fundamentals of engine
thermodynamics; numerical modeling
of gas dynamics; thermal management;
mechanical and lubrication systems;
system level models for controls; system
level models for vehicle fuel economy and
emissions predictions.
The spectrum of papers solicited for this
session reflect the truly multidisciplinary
nature of the field, covering advances
in areas such as chemical kinetics,
combustion and spray modeling,
turbulence, mesh generation, and
approaches targeting improved
computational efficiency. Papers employing
multi-dimensional modeling to gain a
deeper understanding of processes related
to turbulent transport, transient phenomena,
and chemically reacting, two-phase flows
are also encouraged
Powertrain Actuators and Sensors needs
to be modified, for example, as “Actuator
and sensor mechanisms, devices, and
systems; and the impact and control of
such actuation and sensing systems on
Powertrain thermodynamics, combustion,
fuel economy, emissions, and performance.
Papers in this session pertain to
transmission component topics, which
could include Dual Dry Clutch testing,
Torque Converter modeling, low friction seal
research, and more.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:30 a.m.
Organizers:
Michael L. Briggs; Federico Millo,
Politecnico di Torino; Thomas Morel,
Gamma Technologies Inc.; Christof
Schernus, FEV GmbH
Organizers:
Hardo Barths, General Motors LLC; Sarah
Diakhaby, Computational Dynamics, Ltd.;
Allen David Gosman, CD-adapco; Carl
Hergart, Caterpillar Inc.
Organizers:
Steve Thomson, Delphi Corp.
Organizers:
Michael E. Fingerman, Chrysler Group LLC
Optimized Air Intake for a Turbocharged
Engine Taking into Account Water-Cooled
Charge Air Cooler Reflective Properties for
Acoustic Tuning
An Investigation of Grid Convergence for
Spray Simulations using an LES Turbulence
Model
Accurate Instantaneous Engine Speed
Recording by Employing an Optical
Measurement System - Application to a
Typical Low Power Industrial Engine
A Dual Clutch Torque Converter for Dual
Input Shaft Transmissions
(2013-01-0575)
(2013-01-1083)
Chairpersons:
Steve Thomson, Delphi Corp
(2013-01-0304)
(2013-01-0232)
Haitham Mezher, Mann + Hummel - Ecole
P. K. Senecal, E. Pomraning, K. J. Richards,
Centrale de Nantes; Jerome Migaud,
Convergent Science Inc.; S. Som, Argonne
Vincent Raimbault, Jean-Gabriel Lelong,
National Laboratory
Mann + Hummel; David Chalet, Nicolas
Perrot, Ecole Centrale De Nantes; Alexandre
Hunault, Mann + Hummel; Pascal Chesse,
Ecole Centrale De Nantes; Bernhard
Huurdeman, Mann + Hummel
D.- N. Pagonis, G. Theotokatos, G. Livanos,
Dpt. of Naval Architecture TEI of Athens
Darrell Robinette, Ted Skrzycke, General
Motors Company
Importance of Heat Transfer Phenomena
in Small Turbochargers for Passenger Car
Applications
A Comprehensive Model to Predict the
Initial Stage of Combustion in SI Engines
Development of Magneto-Elastic Torque
Sensor for Automatic Transmission
Applications
New Launch Devices for Automatic
Transmissions
(2013-01-0576)
(2013-01-1087)
(2013-01-0301)
(2013-01-0233)
Jose Serrano, Pablo Olmeda, Francisco
Arnau, Miguel Reyes-Belmonte, Universitat
Politècnica de València; Alain Lefebvre,
RENAULT SAS
Tommaso Lucchini, Luca Cornolti, Gianluca
Montenegro, Gianluca D’Errico, Marco
Fiocco, Politecnico di Milano; Atsushi Teraji,
Taisuke Shiraishi, Nissan
Gregory Michael Pietron, Yuji Fujii, Joseph
Kucharski, Diana Yanakiev, Nimrod Kapas,
Steve Hermann, Ford Motor Company;
Ramana Hogirala, Thomas L. Greene,
Methode Electronics
Scott William Binder, Matthias Fischer,
Christoph Sasse, Joerg Trampler, ZF
Friedrichshafen AG
Importance of Mechanical Losses Modeling
in the Performance Prediction of Radial
Turbochargers under Pulsating Flow
Conditions
Correlating Measured Combustion
Design of Transmission Electro-Hydraulic
Performance with CFD Predicted In-Cylinder Control Module
Flows for a Spark-Ignition Direct-Injection
(SIDI) Engine with Enhanced Charge Motion
A Design Guide for Wet Multiple Plate
Clutches on Forklift Truck Transmissions
Considering Strength Balance between
Friction Material and Mating Plate
(2013-01-0577)
(2013-01-1090)
(2013-01-0302)
(2013-01-0231)
Jose Ramón Serrano, Pablo Olmeda,
Andres Tiseira, Luis Miguel García-Cuevas,
Universitat Politècnica de València; Alain
Lefebvre, RENAULT SAS
Ronald O. Grover, Jr., David Cleary, General
Motors Company
Eiji Sugitachi, Shinji Takeuchi, Hajime
Yokoyama, Masamichi Watanabe, DENSO
Corp.
Kazunari Okabe, Mitsubishi Heavy
Industries, Ltd.; Haruo Houjoh, Tokyo
Divided Exhaust Period: Effects of Changing
the Relation between Intake, Blow-Down
and Scavenging Valve Area
Comparison of PFI and DI Operation in a
Downsized Gasoline Engine
BREAK
(2013-01-0578)
(2013-01-1103)
Stefan Gundmalm, Andreas Cronhjort,
Hans-Erik Angstrom, CCGEx, KTH Royal
Vincent Knop, Eddie Essayem, IFP Energies
nouvelles
Windage Tray Design Comparison using
Crankcase Breathing Simulation
Super-Knock Prediction Using a Refined
Theory of Turbulence
Investigation and Improvement of Interfacial
Delamination in In-Situ Measuring Sensor
for Automobile Application
(2013-01-0580)
(2013-01-1109)
(2013-01-0303)
Owais Iqbal, Chrysler Canada Inc.; Kunal
Arora, Chrysler Group LLC
Norbert Peters, Bruno Kerschgens, RWTH
Aachen University, Germany; Günther
Paczko, Advanced Combustion GmbH.
Atsushi Takahashi, Honda R&D Co., Ltd.;
Naoaki Yoshida, Kyushu University; Kenji
Matsumoto, Honda R&D Co., Ltd.
11:10
a.m.
Innovative Techniques for On-Board
Exhaust Gas Dynamic Properties
Measurement
(2013-01-0305)
Nicolo Cavina, Alberto Cerofolini, Enrico
Corti, Fabrizio Ponti, University of Bologna;
Matteo De Cesare, Federico Stola, Magneti
Marelli SpA Powertrain Division
120
TIME
W2-61
10:01
p.m.
W2-64
O2-43
O2-35/36
- Turbocharging & Fundamentals
(PFL208)
Powertrain Actuators and
Sensors (PFL302)
Launch Devices (PFL605)
are also encouraged
Powertrain Actuators and Sensors needs
to be modified, for example, as “Actuator
and sensor mechanisms, devices, and
systems; and the impact and control of
such actuation and sensing systems on
Powertrain thermodynamics, combustion,
fuel economy, emissions, and performance.
Papers in this session pertain to
transmission component topics, which
could include Dual Dry Clutch testing,
Torque Converter modeling, low friction seal
research, and more.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:10 a.m.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:30 a.m.
Organizers:
Michael L. Briggs; Federico Millo,
Schernus, FEV GmbH
Organizers:
Organizers:
Steve Thomson, Delphi Corp.
Organizers:
Michael E. Fingerman, Chrysler Group LLC
Lubricants Activity
Lubricants Activity
Lubricants Activity; Control and Calibration
Lubricants Activity
Chairpersons:
Steve Thomson, Delphi Corp
Intra-Pipe Restriction Non-Homentropic
Boundary Resolution Method (Written Only
(2013-01-0582)
Felipe Castillo, GIPSA Lab Renault SAS;
Emmanuel Witrant, Luc Dugard, GIPSA
Lab UJF Grenoble 1/CNRS; Vincent Talon,
Renault SAS; David Chalet, Pascal Chesse,
LUNAM Université, Ecole Centrale de
Nantes
10:02
p.m.
Advanced Turbocharger Model for 1D ICE
Simulation - Part I (Written Only -- No Oral
Presentation)
(2013-01-0581)
Panagiotis Grigoriadis, Emanuel Binder,
Lars Böttcher, Andreas Benz, Marc Sens,
IAV GmbH
Planned by Transmission and Driveline
Lubricants Activity
TIME
W2-67
10:50
a.m.
11:10
a.m.
10:01
p.m.
O2-35/36
Small Engine Technology
(PFL503)
Components/Subsystems
(PFL607)
In this session, papers regarding research
and development on small engine
technology will be included. Topics will
possibly consist of combustion, emission,
control, NVH, etc.
This session includes presentations on
transmission and driveline components
including an annular nozzle for a fixed
displacement transmission pump, thermal
mapping of a rear axle, differential bevel
pinion stress analysis, accumulator sizing,
planetary gear load distribution, clutch
plate parameters influencing torque and
friction stability, and a six sigma approach
to optimization of a front wheel drive
transmission
10:50 a.m. - 11:30 a.m.
10:50 a.m. - 11:30 a.m.
Organizers:
David Masser, Ford Motor Co.; Robert Kee,
Queen’s University Belfast
Organizers:
John Collins, John A. Frait, Chrysler Group
LLC
Air Assisted Direct Cylinder Barrel Injection
of Gasoline in a Two-Stroke S.I. Engine
A Development of the High-Toughness
Nitriding to Reduce Heat Treatment
Distortion of AT Annulus Gear
(2013-01-0583)
(2013-01-1769)
Ciju Paul, Indian Space Research
Organisation; Pradeep V, A Ramesh, Indian
Institute of Technology Madras
Jae Hong Park, Bong Lae Jo, Chang Won
Kang, Eui Jun Kim, Hyung Oh Ban, Hyundai
Motor Company
Boost Port Injection of LPG in a Two Stroke SI Engine for Reduction in HC
Emissions
New SAE
2013 World Congress
Power & Propulsion
TECHNICAL PAPER
COLLECTIONS
Designed for the individual with a specific research need,
SAE Collections are assembled from technical papers
authored from a SAE session, are directly related to a
specific topic or technology, and are available online
anytime through MyLibrary.
Titles include:
(2013-01-0584)
Advanced Hybrid and Electric
Vehicle Powertrains, 2013
Pradeep V, Varuna Narasimhan J, Shamit
Bakshi, A Ramesh, Indian Institute of
Technology Madras
Advanced Battery
Technologies, 2013
Electric Motor & Power
Electronics, 2013
Control Strategy Research of Engine Smart
Start/Stop System for a Micro Car (Written
Study of Impact Loading on Helical Gears
using Finite Element Analysis (Written Only
(2013-01-0585)
(2013-01-1773)
Hanyu Chen, Chengji Zuo, Hefei University
of Technology; Yinnan Yuan, Nantong
University
Venkata Ramana Raju Penumatsa, General
Motors Tech. Center
Natural Gas Engines and
Vehicles, 2013
Design of a Single Rail Internal Gear Shift
System for a 5 Speed Manual Transmission
Advanced Vehicle
Technology, 2013
Papers: 13 Papers, COLL-TP-00344
10:02
p.m.
(2013-01-1771)
Jibin Paul K, VIvek Ramesh, Ganesh N
Adiga, Mahindra & Mahindra, Ltd.
10:03
p.m.
The Design of Formula SAE Half Shafts for
Optimum Vehicle Acceleration (Written Only
(2013-01-1772)
James P. Parsons, California State
Polytechnic Univ-Pomona
11:10
p.m.
Ratcheting OWC in Torque Converters
(2013-01-1770)
Markus Steinberger, Luk USA LLC; Norman
J. Bird, Ford Transmission & Chassis Div.
Lubricants Activity
Lubricants Activity
SI Combustion, 2013
Fuel Injection and Sprays, 2013
Engine Flows and Combustion
Diagnostics, 2013
Heat Transfer and Advances in
Thermal & Fluid Sciences, 2013
Alternative and Advanced
Fuels, 2013
High Efficiency IC Engines, 2013
Powertrain Control &
Calibration, 2013
Mixing Controlled CI
Combustion, 2013
Optimization, 2013
COLL-TP-00357
Fuel and Additive Effects on
CI Engine Performance, 2013
New CI & SI Engines and
Components, 2013
Kinetically Controlled CI
Combustion (including HCCI),
2013
Engine Boosting Systems, 2013
Modeling of SI and
Diesel Engines, 2013
Powertrain NVH, 2013
Transmission and Driveline, 2013
Multi-Dimensional
Engine Modeling, 2013
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
P135218
122
TIME
O2-33
O2-44
Competitions (Part 2) (PFL110)
(PFL303)
Fuel Cell Hybrid Electric Propulsion for
automotive applications has the highest
potential to offer both zero emissions and
long range vehicle while being able to
100 percent refuel in a matter of minutes.
This session covers Fuel Cell advances
in Low Cost; Cold Start Optimization;
Modeling, Simulation of PEM Fuel Cell
systems and hydrogen fueling. A Panel
of Industry Experts will be invited to
discuss theádvances in fuel cells which
will enable the start of fuel cell vehicle
commercialization.
EcoCAR 2: Plugging in to the Future
is North America’s premiere collegiate
advanced vehicle competition series,
sponsored by General Motors and the
U.S. Department of Energy. EcoCAR 2
tasks university teams with designing,
implementing and refining advanced
powertrains into a conventional midsize
sedan. This session presents yearly results
from teams in the competition, highlighting
the entire EcoCAR vehicle development
process, as well as unique papers with
research based off the competition.
new fuels
sensing, etc.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Jesse Schneider, BMW AG
Organizers:
Organizers:
Organizers:
Automotive; Guoming G. Zhu, Michigan
State Univ.
Moderators:
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
W2-70
Advanced Fuel Cell Vehicle
Applications (PFL101)
Chairpersons:
1:00
p.m.
W2-66
Chairpersons:
Engineering Center
MAGLEV Driveline for Wheeled Fuel Cell
Powered Vehicles
Detailed Design of a Fuel Cell Plug-in Hybrid
Electric Vehicle
Criteria Emissions, Particle Number
Emissions, Size Distributions, and Black
Carbon Measurements from PFI Gasoline
Vehicles Fuelled with Different Ethanol and
Butanol Blends
Development of a New 2.0-Liter FuelEfficient Diesel Engine
(2013-01-0473)
(2013-01-0560)
(2013-01-1147)
(2013-01-0310)
Henry Kamau, VBD Automotive
Technologies, Ltd.
Shawn Salisbury, Benjamin Geller, Thomas
Bradley, Colorado State Univ; Matthew Fox,
Tesla Motors
George Karavalakis, Univeristy of California,
Riverside; Daniel Short, Maryam Hajbabaei,
Diep Vu, Mark Villela, Robert Russell,
Thomas Durbin, Akua Asa-Awuku,
University of California, Riverside
Junji chisaki, Kazuya Yoshijima, Takashi
Kikuchi, Shoichiro Morinaka, Kenichi
Yamada, Toyota Motor Corporation;
Masaaki Okamoto, Tsutomu Oda, Keisuke
Manabe, Toyota Industries Corporation
Development of an Evaporatively Cooled
Hydrogen Fuel Cell System and its Vehicle
Application
Equivalent Drive Cycle Analysis, Simulation,
and Testing - Wayne State University’s OnRoad Route for EcoCAR2
Blend Ratio Optimization of Fuels
Containing Gasoline Blendstock, Ethanol,
and Higher Alcohols (C3-C6): Part I Methodology and Scenario Definition
Optimization of Dual Loop EGR of a V6 3.0
Liter Diesel Engine for CO2 Reduction
(2013-01-0475)
(2013-01-0549)
(2013-01-1144)
(2013-01-0316)
Alan Warburton, Dave Mossop, Ben
Burslem, Pratap Rama, Paul Adcock,
Jon Cole, James Edwards, Daniel Ninan,
Michael Provost, Intelligent Energy
Kevin L. Snyder, Jerry Ku, Wayne State
University
Kristina Lawyer, Michigan Technological
University; Andrew Ickes, Thomas Wallner,
Argonne National Laboratory; David Ertl,
Rodney Williamson, Iowa Corn Promotion
Board; Scott Miers, Jeffrey Naber, Michigan
Haewook Lee, Chunghoon Jo, Seungsuk
Yoon, Seyoung YI, Yangrae Kim, Jongik
Jeon, Hyundai Motor Company
Nanometers Layered Conductive Carbon
Coating on 316L Stainless Steel as Bipolar
Plates for More Economical Automotive
PEMFC
Parallel-Through-The-Road Plug-In Hybrid
Vehicle Modeling and Simulation by Wayne
State University for EcoCAR2
Blend Ratio Optimization of Fuels
Containing Gasoline Blendstock, Ethanol,
and Higher Alcohols (C3-C6): Part II - Blend
Properties and Target Value Sensitivity
Disturbance Sources in the Diesel Engine
Combustion Process
(2013-01-0477)
(2013-01-0541)
(2013-01-1126)
(2013-01-0318)
Jaimoo Yoo, Ki Ho Yeo, Eui Chul Shin,
Young Ha Jun, J & L Tech Co. LTD
Kevin L. Snyder, Love Lor, Jerry Ku, Wayne
State University
Kristina Lawyer, Michigan Technological
University; Andrew Ickes, Thomas Wallner,
Argonne National Laboratory; David Ertl,
Rodney Williamson, Iowa Corn Promotion
Board; Scott Miers, Jeffrey Naber, Michigan
Zhijia Yang, Thomas Steffen, Richard
Stobart, Loughborough Univ
Multi-Physics Numerical Analysis of PEMFC
for Automobile Application
VTool: A Method for Predicting and
Understanding the Energy Flow and Losses
in Advanced Vehicle Powertrains
Performance Evaluation and Emission
Studies of a Single Cylinder Diesel Engine
Fueled with Isopropyl Alcohol and Diesel
Effect of Ultra-Cooled EGR and Retarded
Injection Timing on Low Temperature
Combustion in CI Engines
(2013-01-0476)
(2013-01-0543)
(2013-01-1132)
(2013-01-0321)
Yuichiro Tabuchi, Toshikazu Kotaka, Nissan
Motor Company, Ltd.; Chao-Yang Wang,
The Pennsylvania State University
Robert Jesse Alley; Douglas Nelson, Eli
White, P. Christopher Manning, Virginia Tech
Ashish Kumar Singh, Chinmaya Mishra,
Vipul Vibhanshu, M.Tech (Thermal
Engineering); Naveen Kumar, Professor,
DTU, Delhi
P. Brijesh, A. Chowdhury, S. Sreedhara, IIT
Bombay, Mumbai-400 076, India
Ultra-Long Life Oil-Free Supercharger for
Fuel Cell and Hybrid Vehicle Power Trains
Design of a High Voltage Lithium Ion Energy
Storage System
Direct Visualization of Combustion in an
E85-Fueled DISI Engine under Various
Operation Conditions
Study on Reduction of Diesel Engine Out
Emission through Closed Loop Control
based on the In-Cylinder Pressure with
EGR Model
(2013-01-0478)
(2013-01-0564)
(2013-01-1129)
(2013-01-0322)
Hans Gangwar, Ford Motor Co.; Robert
Anderson, Vortech Engineering; Kyeong-Su
Kim, Neuros Co., Ltd.
Laura Nash, Jonathan Nibert, Zachariah
Chambers, Marc Herniter, Rose-Hulman
PO-I Lee, Nick Polcyn, Ming-Chia Lai,
Wayne State University
Seunghyun Lee, Jeongwoo Lee, Seungha
Lee, Dongsu Kim, Yoonwoo Lee, Seoul
National Univ; Seongeun Yu, Hyundai motor
group; Hoimyung Choi, Advanced Institutes
of Convergence Tech
TIME
O2-33
O2-44
Competitions (Part 2) (PFL110)
(PFL303)
Fuel Cell Hybrid Electric Propulsion for
automotive applications has the highest
potential to offer both zero emissions and
long range vehicle while being able to
100 percent refuel in a matter of minutes.
This session covers Fuel Cell advances
in Low Cost; Cold Start Optimization;
Modeling, Simulation of PEM Fuel Cell
systems and hydrogen fueling. A Panel
of Industry Experts will be invited to
discuss theádvances in fuel cells which
will enable the start of fuel cell vehicle
commercialization.
EcoCAR 2: Plugging in to the Future
is North America’s premiere collegiate
advanced vehicle competition series,
sponsored by General Motors and the
U.S. Department of Energy. EcoCAR 2
tasks university teams with designing,
implementing and refining advanced
powertrains into a conventional midsize
sedan. This session presents yearly results
from teams in the competition, highlighting
the entire EcoCAR vehicle development
process, as well as unique papers with
research based off the competition.
new fuels
sensing, etc.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Organizers:
Organizers:
Organizers:
Automotive; Guoming G. Zhu, Michigan
State Univ.
Moderators:
3:00
p.m.
Chairpersons:
Engineering Center
Understanding of Thermal Characteristics of
Fueling Hydrogen High Pressure Tanks and
Governing Parameters
The Importance of Maximizing Grid
Electricity Usage in the Component
Selection and design of Midsize PHEV
Investigation of Direct-Injected Ethanol
and Diesel Fuel Blends on Gaseous and
Particulate Emissions in a Medium-Duty
Diesel Engine
Numerical Study on Emission
Characteristics of High-Pressure Dimethyl
Ether (DME) under Different Engine Ambient
Conditions
(2013-01-0474)
(2013-01-0548)
(2013-01-1141)
(2013-01-0319)
Masanori Monde, Masataka Kosaka, Saga
University
Trevor Fayer, Trevor Crain, University of
Washington EcoCAR2; Brian Fabien, Per
Reinhall, University of Washington
Tim A. Nevius, Dario Rauker, Scott T. Porter,
Horiba Automotive Test Systems
Khanh Cung; Meghraj Bhagat; Anqi Zhang;
Seong-Young Lee, Michigan Technological
Univ
SAE J2601, Worldwide Hydrogen Fueling
Protocol and Fuel Cell Vehicle to Station
Communications and the validation thereof
Modeling and Development of E85 Fueled
Two-Mode Hybrid Electric Vehicle
The Impact of Cellulosic Ethanol on the
Performance and Emissions of a Circle
Track Race Car
Online Adjustment of Start of Injection and
Fuel Rail Pressure Based on Combustion
Process Parameters of Diesel Engine
(Oral Only)
(2013-01-0547)
(2013-01-1149)
(2013-01-0315)
Kunal Patil, Stephen Bayne, Timothy T.
Maxwell, Texas Tech. University
Forrest Jehlik, Argonne National Laboratory;
Daniel Bocci, Copia Advance Solutions
Zhijia Yang, Richard Stobart, Edward
Winward, Loughborough Univ
High Temperature Ignition Delay Times of
Iso-Pentanol
Virtual Performance and Emissions Mapping
for Diesel Engine Design Optimization
(Oral Only)
(2013-01-0308)
Erjiang Hu, Xi’an Jiaotong University;
Zuohua Huang, Yingjia ZHANG, Jing Gong,
Xian Jiaotong Univ
Andrew Smallbone, Amit Bhave, Michael
Hillman, cmcl innovations; Allan Saville,
Caterpillar UK Engines Co Ltd.; Robert
Mcdavid, Caterpillar Inc
3:20
p.m.
10:01
p.m.
W2-70
Advanced Fuel Cell Vehicle
Applications (PFL101)
Chairpersons:
2:40
p.m.
W2-66
Closed Loop Control Algorithm of Fuel Cell
Output Power in a Vehicular Power-Train
Intelligent Energy Distribution for Series
HEVs Using Determined Optimal Driving
Patterns via a Genetic Algorithm
(2013-01-0479)
(2013-01-0572)
(2013-01-0327)
Liangfei Xu, Tsinghua Univ.; Minggao
Ouyang, Jianqiu Li, Haiyan Huang, Fuyuan
Yang, Tsinghua Univ; Quanquan Gan,
Sunrise Power Co,. Ltd.
Phu Ho, Eric Klang, North Carolina State
University
Daniel Humke, John Deere Power Systems
Dynamic Modeling of a PEM Fuel Cell for a
Low Consumption Prototype (Written Only
HMI Design for Increasing Vehicle Energy
Efficiency by Affecting Driving Habits
(2013-01-0480)
(2013-01-0570)
Teresa Donateo, Damiano Pacella, Giovanni
Indiveri, Fabio Ingrosso, Antonio Damiani,
University of Salento
Idan David Regev, Jerry Ku, Wayne State
University
Analysis of Multivariable Controller
Designs for Closed-Loop Diesel Engine Air
System Control (Written Only -- No Oral
Presentation)
10:02
p.m.
10:03
p.m.
Numerical Modeling of Rear Subframe
Under Different Loading Conditions (Written
(2013-01-0571)
Usman Ali, Roydon Andrew Fraser,
University of Waterloo
Lubricants Activity
124
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-63
W2-69
W2-64
W2-65
High Efficiency IC Engines (Part 1
of 3) (PFL216)
(Part 2 of 3) In-Cylinder Processes
(PFL204)
techniques.
This session focuses on technologies
such as advanced and partially mixed
combustion, cooled EGR boosting, ignition
and direct injection technologies, pressure
boosting, intelligent combustion, thermal
efficiency including waste heat recovery,
fully variable valvetrains, and other new and
developing technologies.
conditions.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Co.
Organizers:
Petersen, Ford Motor Company
Organizers:
Sangsuk Lee, Caterpillar Tech. Center;
Gerald Micklow, Florida Institute of
Technology; Robert Gary Prucka, Clemson
Univ.; David B. Roth, BorgWarner Inc.;
James P. Szybist, Oak Ridge National
Laboratory; Bengt Johansson, Lund
University
Organizers:
Jose M Garcia, Universidad Politecnica
de Valencia; Song-Charng Kong, Iowa
State University; Budhadeb Mahakul,
DEERE & CO; Robert McDavid, Caterpillar
Inc.; Mark Musculus, SANDIA NATIONAL
LABORATORI; Raul Payri, Universidad
Politecnica de Valencia; Stefan Simescu,
Southwest Research Institute; Dale R. Tree,
Brigham Young Univ.; Rishikesh Venugopal,
Achates Power Inc.; John F. Wright,
Cummins Inc.; Yong Yi, Caterpillar Inc.;
Ming Zheng, Univ. of Windsor
Chairpersons:
Bengt Johansson, Lund University
Chairpersons:
Mark Musculus, Sandia National
Laboratories; Qingang Xiong, Iowa State
University
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
GDi Skew-Angled Nozzle Flow and Near2-D Internal EGR Distribution
Field Spray Analysis using Optical and
Measurements in an Engine by LaserX-Ray Imaging and VOF-LES Computational Induced Fluorescence
Fluid Dynamics
Close to Stoichiometric Partially Premixed
Combustion -The Benefit of Ethanol in
Comparison to Conventional Fuels
Engine Combustion Network (ECN), Spray
A: Soot Formation and Oxidation and
Effects of Ambient Temperature and Oxygen
Concentration
(2013-01-0255)
(2013-01-0556)
(2013-01-0277)
(2013-01-0901)
Bizhan Befrui, Andreas Aye, Peter
Spiekermann, Daniel L. Varble, Delphi
Powertrain Systems; Mark A. Shost, MingChia Lai, Wayne State University; Jin Wang,
Kenji Fukui, Taketoshi Fujikawa, Mamoru
Tohyama, Yoshiaki Hattori, Kazuhiro
Akihama, Toyota Central R&D Labs Inc
Mengqin Shen, Martin Tuner, Bengt
Johansson, Lund University
Emre Cenker, IFP Energies nouvelles;
Gilles Bruneaux, IFP Energies novelles;
Lyle Pickett, Sandia National Laboratories;
Christof Schulz, IVG, University of DuisburgEssen
Experimental Investigation of In-Cylinder
Wall Wetting in GDI Engines Using a
Shadowgraphy Method
Investigation of the Interaction of Charge
Motion and Residual Gas Concentration in
an Optically Accessible SI Engine
Part-Load Operation of Gasoline DirectInjection Compression Ignition (GDCI)
Engine
Uncertainty in Sampling and TEM Analysis
of Soot Particles in Diesel Spray Flame
(2013-01-1604)
(2013-01-0558)
(2013-01-0272)
(2013-01-0908)
Bennie Luijten, Eindhoven University Of
Technology; Philipp Adomeit, Andre Brunn,
FEV GmbH; Bart Somers, Eindhoven
University Of Technology
Thomas Mederer, Michael Wensing, Alfred
Leipertz, LTT & SAOT Erlangen
Mark C. Sellnau, James Sinnamon, Kevin
Hoyer, Junghwan Kim, Marilou Cavotta,
Harry Husted, Delphi Powertrain
Katsufumi Kondo, Tetsuya Aizawa, Meiji
Univ.; Sanghoon Kook, The University of
New South Wales; Lyle Pickett, Sandia
National Laboratories
Diffusion Combustion Phenomena in GDi
Engines caused by Injection Process
Experimental Study on the Characteristics
of Knock under DI-HCCI Combustion Mode
with Ethanol/Gasoline Mixed Fuel
Efficiency and Emissions performance of
Multizone Stratified Compression Ignition
Using Different Octane Fuels
In-Flame Soot Sampling and Particle
Analysis in a Diesel Engine
(2013-01-0261)
(2013-01-0544)
(2013-01-0263)
(2013-01-0912)
Axel Berndorfer, Stephan Breuer, Walter
Piock, Paul Von Bacho, Delphi Powertrain
Systems
Yintong Liu, Xian Shi, Jun Deng, Yulin Chen,
Minzhang Hu, Liguang Li, Tongji Univ
Stephen Ciatti, Michael Johnson, Argonne
National Laboratory; Bishwadipa Das
Adhikary, Rolf Reitz, University of Wisconsin
Madison; Aaron Knock, Columbia University
Sanghoon Kook, Renlin Zhang, Kevin
Szeto, The University of New South
Wales; Lyle M. Pickett, Sandia National
Laboratories; Tetsuya Aizawa, Meiji
University
Premature Flame Initiation in a
Turbocharged DISI Engine - Numerical and
Experimental Investigations
Cycle-by-Cycle Soot Estimation in Diesel
Engines
Experimental Investigation on different
Injection Strategies for Ethanol Partially
Premixed Combustion
Visualization and Heat Release Analysis
of Premixed Diesel Combustion with
Various Fuel Ignitabilities and Oxygen
Concentrations in a Constant Volume
Combustion Vessel
(2013-01-0252)
(2013-01-0545)
(2013-01-0281)
(2013-01-0899)
Stefan Palaveev, Max Magar, Heiko Kubach,
Robert Schiessl, Ulrich Spicher, Ulrich
Maas, Karlsruhe Institute of Technology
Tamer Badawy, Wayne State Univ; Fadi
Estefanous; Naeim Henein, Wayne State
Univ
Mehrzad Kaiadi, Bengt Johansson, Marcus
Lundgren, Lund University; John A. Gaynor,
Scania CV AB
Hideyuki Ogawa, Gen Shibata, Xueming Jin,
Hokkaido Univ.; Toshiyuki Hirose, COSMO
Oil Co., Ltd.; Naoki Kono, Japan Petroleum
Energy Center
Experimental and Numerical Study of
Water Spray Injection at Engine-Relevant
Conditions
Cycle Resolved In-Cylinder NOx and Ion
Current Measurements in a Diesel Engine
Sensitivity Analysis Study on Ethanol
Partially Premixed Combustion
Optical Investigation of the Reduction of
UHC Emissions using Close-Coupled Post
Injections at LTC Conditions in a HeavyDuty Diesel Engine
(2013-01-0250)
(2013-01-0555)
(2013-01-0269)
(2013-01-0910)
Meghraj Bhagat, Khanh Cung, Jaclyn
Johnson, Seong-Young Lee, Jeffrey Naber,
Michigan Technological Univ; Sam Barros
Fadi Adly Anis Estefanous; Tamer Badawy,
Naeim Henein, Wayne State Univ
Mehrzad Kaiadi, Bengt Johansson, Marcus
Lundgren, Lund University; John A. Gaynor,
Scania CV AB
Jacqueline O’Connor, Mark Musculus,
TIME
W2-63
W2-69
W2-64
W2-65
of 3) (PFL216)
(Part 2 of 3) In-Cylinder Processes
(PFL204)
techniques.
conditions.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
Organizers:
Co.
Organizers:
Petersen, Ford Motor Company
Organizers:
University
Organizers:
Jose M Garcia, Universidad Politecnica
de Valencia; Song-Charng Kong, Iowa
State University; Budhadeb Mahakul,
DEERE & CO; Robert McDavid, Caterpillar
Inc.; Mark Musculus, SANDIA NATIONAL
LABORATORI; Raul Payri, Universidad
Politecnica de Valencia; Stefan Simescu,
Southwest Research Institute; Dale R. Tree,
Brigham Young Univ.; Rishikesh Venugopal,
Achates Power Inc.; John F. Wright,
Cummins Inc.; Yong Yi, Caterpillar Inc.;
Chairpersons:
Bengt Johansson, Lund University
Chairpersons:
Mark Musculus, Sandia National
Laboratories; Qingang Xiong, Iowa State
University
2:40
p.m.
3:00
p.m.
3:20
p.m.
LP EGR and IGR Compromise on a GDI
Engine at Middle Load
Vehicle Demonstration of Naphtha Fuel
Achieving Both High Efficiency and
Drivability with EURO6 Engine-Out NOx
Emission
Diesel Knock Visualization and Frequency
Analysis of Premixed Charge Compression
Ignition Combustion with a Narrow Injection
Angle
(2013-01-0256)
(2013-01-0267)
(2013-01-0906)
Guillaume Bourhis, Jonathan Chauvin,
Xavier Gautrot, Loic de Francqueville, IFP
Energies nouvelles
Junseok Chang, Gautam Kalghatgi, Amer
Amer, Saudi Aramco; Philipp Adomeit,
Hans Rohs, FEV GmbH; Benedikt Heuser,
Institute for Combustion Engines, RWTH
Aachen University
Stephen Sungsan Park, Yongjin Jung,
Choongsik Bae, Korea Advanced Inst. of
Science & Tech.
Advanced GDI Injector Control with
Extended Dynamic Range
Potential ESC Performance of a MultiCylinder Heavy Duty PPC Truck Engine:
System Simulations based on Single
Cylinder Experiments
Air-Assisted Direct Injection Diesel
Investigations
(2013-01-0258)
(2013-01-0268)
(2013-01-0907)
Marco Parotto, Stefano Sgatti, Fabio Sensi,
Magneti Marelli SpA Powertrain Division
Martin Tuner, Lund University
Chad Koci, Radu Florea, Sudhakar Das,
Mark Walls, Stefan Simescu, Charles
Roberts, Southwest Research Institute
Development of a Low-Noise High Pressure
Fuel Pump for GDi Engine Applications
Exploring the Pathway to High Efficiency IC
Engines through Exergy Analysis of Heat
Transfer Reduction
Swirl and Injection Pressure Impact on
After-Oxidation in Diesel Combustion,
Examined with Simultaneous Combustion
Image Velocimetry and Two Colour Optical
Method
(2013-01-0253)
(2013-01-0278)
(2013-01-0913)
Joseph G. Spakowski, Timothy D. Spegar,
Delphi Automotive; Luca Mancini, Magneti
Marelli
Bernard Johnson, Chris Edwards, Stanford
University
Henrik Dembinski, Scania CV AB; Hans-Erik
Angstrom, Royal Institute of Technology
Lubricants Activity
Lubricants Activity
Lubricants Activity
SAE Technical Paper Collection, COLLTP-00355 and SUB-TP-00012, and also
sae.org
sae.org
10:01
p.m.
Establishment of a Database by
Conducting Intake Manifold and In-Cylinder
Flow Measurements inside an Internal
Combustion Engine Assembly (Written Only
(2013-01-0565)
Mayank Mittal, Harold Schock, Ravi Vedula,
Ahmed Naguib, Michigan State University
Lubricants Activity
126
TIME
W2-61
W2-67
- SI Combustion (PFL208)
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
W2-68
Panel - Fuels & Lubricants
Council Open Forum -- The Next
General of Passenger Car Engine
Oil, ILSAC GF-6 (PFL510)
O2-35/36
Controls (PFL604)
are also encouraged
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Federico Millo, Politecnico di Torino;
Thomas Morel, Gamma Technologies Inc.;
Angelo Onorati, Politecnico di Milano;
Christof Schernus, FEV GmbH; Xiaofeng
Yang, General Motors LLC
Organizers:
Organizers:
Ron Romano, Ford Motor Co.
Organizers:
Gang Chen, Hussein Dourra, Chrysler
Group LLC
Charge Motion Analysis to Guide
Engine Port Development and Enhance
Combustion Stability for High Cooled
Exhaust Gas Recirculation Rates
LES Multi-cycle Analysis of a High
Performance GDI Engine
Fuel Economy Analysis of Alternator with
Kinetic Energy Storage for a Conventional
Vehicle
(2013-01-1313)
(2013-01-1080)
(2013-01-0481)
Surendra Gaikwad, Nameer Salman, Saad
Umer, Chrysler Group LLC
Stefano Fontanesi, Stefano Paltrinieri, Univ
of Modena and Reggio Emilia; Alessandro
Tiberi, Ferrari SpA; Alessandro D’Adamo,
Univ of Modena and Reggio Emilia
Eitaro Tanaka, Takahiro Narita, DENSO
Corp.; Hitoshi Maegawa, Nippon Soken Inc
Modeling Cycle-to-cycle Variations
in 0-D/1-D Simulation by means of
Combustion Model Parameter Perturbations
based on Statistics of Cycle-resolved Data
Knock Tendency Prediction in a High
Performance Engine Using LES and
Tabulated Chemistry
An Optimal Powertrain Control Strategy for
a Mild Hybrid Electric Vehicle
This session covers transmission and
driveline controls. Session will cover topics
related to controls hardware, controls
software, and controls integration.
Panelists:
Peter M. Lee, Southwest Research Institute
Glenn Mazzamaro, RT Vanderbilt Co.
Charles E. Richardson, Ford Motor Co.
Rodney Walker, Safety-Kleen Systems Inc.
Angela Willis, General Motors LLC
(2013-01-1314)
(2013-01-1082)
(2013-01-0482)
Oldrich Vitek, Jan Macek, Czech Technical
Univ.; Christoph Poetsch, Reinhard Tatschl,
AVL LIST GmbH
Stefano Fontanesi, Stefano Paltrinieri,
Alessandro D’Adamo, Giuseppe Cantore,
Univ of Modena and Reggio Emilia;
Christopher Rutland, Univ of Wisconsin
Madison
Jeffery McGehee, Tennessee Technological
University; Hwan-Sik Yoon, The University
of Alabama
A Quasi-Dimensional NOx Emission Model
for Direct Injection Spark Ignition (DISI)
Gasoline Engines
LES Simulation of Flame Propagation in
a Direct-Injection SI-Engine to Identify the
Causes of Cycle-to-Cycle Combustion
Variations
Automatic Transmission Control Based on
Estimation of Sporty Driving Intention
(2013-01-1311)
(2013-01-1084)
(2013-01-0483)
Jian Gong, Christopher Rutland, University
Reinhard Tatschl, Michael Bogensperger,
Zoran Pavlovic, Peter Priesching, Henrik
Schuemie, AVL List GmbH; Oldrich Vitek,
Jan Macek, Czech Technical University
Shin Noumura, Shogo Matsumoto, Toshio
Tanahashi, Toyota Motor Corporation
Development and Validation of A Knock
Prediction Model for Methanol-Fuelled SI
Engines
Large Eddy Simulation of Premixed
Combustion in Spark Ignited Engines Using
a Dynamic Flame Surface Density Model
Development of the Hybrid Powertrain
Active Damping Control System via Sliding
Mode Control Scheme
(2013-01-1312)
(2013-01-1086)
(2013-01-0486)
Jeroen Vancoillie, Louis Sileghem, Sebastian Chathura Ranasinghe, Weeratunge
Verhelst, Ghent University
Malalasekera, Andrew Clarke,
Loughborough University
You Seok Kou, Faz Weslati, Chrysler Group
LLC
A New Approach for Modeling Cycle-toCycle Variations within the Framework of a
Real Working-Process Simulation
Towards the LES Simulation of IC Engines
with Parallel Topologically Changing Meshes
Dual Mode Control of an Automotive
Clutch-By-Wire System
(2013-01-1315)
(2013-01-1096)
(2013-01-0484)
Markus Wenig, IVK Univ.; Michael Grill,
Michael Bargende, FKFS
Federico Piscaglia, Andrea Montorfano,
Angelo Onorati, Politecnico di Milano
Salem A. Haggag, Fady Ibrahim, Ain Shams
University
Improved Engine Wall Models for Large
Eddy Simulation (LES)
Research of Eliminating Method of
Undesired Shifting for Vehicle with Dual
Clutch Transmission
(2013-01-1097)
(2013-01-0485)
Chalearmpol Plengsaard, Christopher
Rutland, Univ of Wisconsin Madison
Guangqiang Wu, Jianyu Si, Tongji Univ.
Large Eddy Simulation of Evaporating Spray
with a Stochastic Breakup Model
(2013-01-1101)
Abolfazl Irannejad, Farhad Jaberi, Michigan
State University
TIME
W2-61
W2-67
- SI Combustion (PFL208)
W2-68
Panel - Fuels & Lubricants
Council Open Forum -- The Next
General of Passenger Car Engine
Oil, ILSAC GF-6 (PFL510)
Controls (PFL604)
are also encouraged
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Federico Millo, Politecnico di Torino;
Thomas Morel, Gamma Technologies Inc.;
Angelo Onorati, Politecnico di Milano;
Christof Schernus, FEV GmbH; Xiaofeng
Yang, General Motors LLC
Organizers:
Organizers:
Ron Romano, Ford Motor Co.
Organizers:
Gang Chen, Hussein Dourra, Chrysler
Group LLC
10:01
p.m.
driveline controls. Session will cover topics
related to controls hardware, controls
software, and controls integration.
Panelists:
Peter M. Lee, Southwest Research Institute
Glenn Mazzamaro, RT Vanderbilt Co.
Charles E. Richardson, Ford Motor Co.
Rodney Walker, Safety-Kleen Systems Inc.
Angela Willis, General Motors LLC
Mixing Effects of Early Injection in Diesel
Spray Using LES Model with Different
Subgrid Scale Models (Written Only -- No
Oral Presentation)
Multi-Performance Optimization of the
Shift Schedule for Stepped Automatic
Transmissions (Written Only -- No Oral
Presentation)
(2013-01-1111)
(2013-01-0488)
Lei Zhou, Tsinghua University; MaoZhao
Xie, Dalian University of Technology; Kai
Hong Luo, University of Southampton; Ming
Jia, Dalian University of Technology; Qiang
Zhou, FAW JIEFANG Qingdao Auto Factory;
Hong Liu, Dalian University of Technology
Xiaofeng Yin, Wenping Wang, Xu Chen, Han
Lu, Xihua University
Lubricants Activity
Lubricants Activity
Lubricants Activity
128
O2-35/36
TIME
W2-61
O2-35/36
Modeling of SI and Diesel Engines Transmission and Driveline: NVH
- Diesel Combustion (PFL208)
(PFL606)
2:40
p.m.
thermodynamics; numerical modeling of gas
dynamics; thermal management; mechanical
and lubrication systems; system level models
for controls; system level models for vehicle
fuel economy and emissions predictions.
This session addresses transmission noise,
vibration, and harshness (NVH) issues and
design solutions.
2:40 p.m. - 3:40 p.m.
3:00 p.m. - 3:20 p.m.
Organizers:
Michael Bybee, Gamma Technologies Inc.;
Jan Macek, Czech Technical Univ.; Federico
Millo, Politecnico di Torino; Thomas
Morel, Gamma Technologies Inc.; Christof
Schernus, FEV GmbH
Organizers:
Fabio Da Silva Ferreira, Schaeffler Group
USA Inc.; Erich L. Wilfinger, Jatco USA Inc.
W2-66
Chat with the Expert: Propane
Autogas – The Other Gaseous
Fuel (PFLCHAT240)
W2-68
Chat with the Experts:
Communicating Lubricant
and Hardware requirements,
limitations and mutual performance
expectations; Are we getting our
specifications right? (PFLCHAT520)
The session will focus on evaluating
transmission fluid copper corrosion and
seal compatibility. I am hoping that this
conversation will provide some direction
for better understanding of actual fluid
requirements and limitations, and perhaps
provide some suggestions for dealing with
different performance expectations of fluids
and hardware.
4:00 p.m. - 5:00 p.m.
Keynote Speakers:
Alan McEwan, Propane Education &
Research Council
4:00 p.m. - 5:00 p.m.
Organizers:
Timothy P. Newcomb, BorgWarner Inc.
Panelists:
Christopher S. Cleveland, Afton Chemical
Corp.
William David Haynes, BorgWarner Inc.
Martin Theil, BP Europa SE
Chintan Ved, Ford Motor Co.
Richard Vickerman, Lubrizol Corp.
Francis J. Walker, Freudenberg-NOK
Sealing Technologies
Universal Diesel Engine Simulator
(UniDES) 2nd Report: Prediction of Engine
Performance in Transient Driving Cycle
Using One Dimensional Engine Model
(2013-01-0881)
Yusuke Takasu, Satoshi Kaneko, Hiroyuki
Tominaga, Toyota Motor Corporation;
Yoshikazu Namura, Toyota Technical
Development Corporation; Kazuhisa Inagaki,
Matsuei Ueda, Toyota Central R&D Labs., Inc.;
Toshihiro Tani, Toyota Industries Corporation
3:00
p.m.
3:20
p.m.
Multidimensional Optimization of DI Diesel
Engine Working Process Using Multi-Zone
Fuel Spray Combustion Model and Detailed
Chemistry NOx Formation Model
Transmission Torque Converter Arc Spring
Damper Dynamic Characteristics for
Driveline Torsional Vibration Evaluation
(2013-01-0882)
(2013-01-1483)
Andrey Kuleshov, Leonid Grekhov, Bauman
Moscow State Technical Univ.
Zhe Li, Jaspal Sandhu, Chrysler Group LLC
The Development and Application of
Homogeneity Factor on DI Diesel Engine
Combustion and Emissions
(2013-01-0880)
Raouf Mobasheri; Zhijun Peng, Univ of Sussex
10:01
p.m.
The Effect of Multi-Universal Coupling
Phase on Torsional Vibration of Drive Shaft
and Vibration of Vehicle (Written Only -- No
Oral Presentation)
(2013-01-1490)
Guangming Wu, Wenku Shi, Zhiyong Chen,
Jilin University
10:02
p.m.
Analysis of Performance Parameters of
Torsional Vibration Damper Under Various
Operating Conditions (Written Only -- No
Oral Presentation)
(2013-01-1488)
Guangming Wu, Wenku Shi, Zhiyong Chen,
Jilin University
10:03
p.m.
Analysis of Gear Radial and Tilt Tolerance
Stack up and Correlation with Gear
Micro Geometry (Written Only -- No Oral
Presentation)
(2013-01-1491)
Amit Sandooja, Volvo Eicher Commercial
Vehicle Limited
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
O2-33
W2-66
W2-69
Vehicle Powertrains (Part 1 of 4)
(PFL100)
(PFL303)
Engine Boosting Systems (Part 1
of 2) (PFL501)
This session covers new production and
near-production hybrid powertrains, hybrid
architecture, and testing.
new fuels
sensing, etc.
Trends of ever increasing power density,
better fuel economy and now reduced
emissions are increasing focus on
turbocharging/ supercharging and
turbochargers/ superchargers, as part
of overall engine system optimization.
Increased amounts of EGR and use
of aftertreatment devices present new
challenges. This session will cover
conceptual, modeling and experimental
studies relating to advanced turbochargers/
superchargers and advanced boosting
systems to respond to above challenges.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:00 a.m.
Organizers:
Michael Duoba, Argonne National
Laboratory; Ryan McGee, Ford Motor Co.;
Constantine N. Raptis, Mark A. Theobald,
GM Powertrain
Organizers:
Organizers:
McMaster Univ.; Xiaojian Yang; Guoming G.
Zhu, Michigan State Univ.
Organizers:
Arjun D. Tuteja; William Smith, Honeywell
Int’l (Turbo Technologies); David Japikse,
Eric Krivitzky, Concepts NREC; Marcello
Canova
Chairpersons:
George Karavalakis, Univ. of CaliforniaRiverside
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
130
W2-67
Chairpersons:
Eric Krivitzky, Concepts NREC
Validating Volt PHEV Model with
Dynamometer Test Data Using Autonomie
Calculation of Heating Value for Diesel Fuels
Containing Biodiesel
Estimation of Main Combustion Parameters
from the Measured Instantaneous
Crankshaft Speed
Boost System Development for Gasoline
Direct-Injection Compression-Ignition (GDCI)
(2013-01-1458)
(2013-01-1139)
(2013-01-0326)
(2013-01-0928)
Namdoo Kim, Michael Duoba, Namwook
Kim, Aymeric Rousseau, Argonne National
Laboratory
Shailesh Martin Lopes, General Motors
Company; Robert Furey, Furey Fuels Consulting,
LLC; Pat Geng, General Motors Company
Florin Mocanu, Dinu Taraza, Wayne State
University
Kevin S. Hoyer, Mark Sellnau, James
Sinnamon, Harry Husted, Delphi Powertrain
Modeling and Validation of Power-Split and
P2 Parallel Hybrid Electric Vehicles
Evaluation of the Impacts of Biofuels on
Emissions for a California Certified Diesel
Fuel from Heavy-Duty Engines
Development of an Improved Residuals
Estimation Model for Dual Independent
Cam Phasing Spark-Ignition Engines
Assessing the Loss Mechanisms
Associated With Engine Downsizing,
Boosting and Compression Ratio Change
(2013-01-1470)
(2013-01-1138)
(2013-01-0312)
(2013-01-0929)
SoDuk Lee, Byungho Lee, Joseph
McDonald, L. James Sanchez, Edward
Nam, US Environmental Protection Agency
Maryam Hajbabaei, Kent C. Johnson, University
of California, Riverside; Robert Okamoto,
California Air Resources Board; Thomas D.
Durbin, University of California, Riverside
Vaibhav Kale, Yeliana Yeliana, Jeremy
Worm, Jeffrey Naber, Michigan
Technological Univ
Patrick Smith, Wai K. Cheng, MIT
Analysis of Input Power, Energy Availability,
and Efficiency during Deceleration for X-EV
Vehicles
Comprehensive Study of Criteria Emissions
from Low Blend Level Biodiesels and their
Certification in California
Estimation of the Engine-Out NO2/NOx
Ratio in a EURO VI Diesel Engine
Comparative Evaluation of Turbochargers
for High Horsepower Diesel-Electric
Locomotives
(2013-01-1473)
(Oral Only)
(2013-01-0317)
(2013-01-0930)
Eric Rask, Danilo Santini, Henning LohseBusch, Argonne National Laboratory
Maryam Hajbabaei, university of california
riverside; George Karavalakis, Kent
Johnson, Univ of California-Riverside;
Alexander Mitchell, Jim Guthrie, California
Air Resources Board; Thomas Durbin, Univ
of California-Riverside
Roberto Finesso, Daniela Misul, Ezio
Spessa, Politecnico di Torino
Anirudh Gautam, Avinash Kumar Agarwal,
I I T Kanpur
System Simulation and Analysis of EPA
5-Cycle Fuel Economy for Powersplit Hybrid
Electric Vehicles
Experimental and Modeling Study of
Biodiesel Surrogates Combustion in a CI
Engine
Identification of Factors Influencing Premixed
Diesel Engine Noise and Mechanism of
Noise Reduction by EGR and Supercharging
Development of High Speed Motor and
Inverter for Electric Supercharger
(2013-01-1456)
(2013-01-1130)
(2013-01-0313)
(2013-01-0931)
Yan Meng, Mark Jennings, William
Schwartz, Poyu Tsou, Ford Motor Co.
Xin Wang, Mingfa Yao, Shanju Li, Jingbo
Gu, Tianjin Univ
Gen Shibata, Yushi Shibaike, Hirooki
Ushijima, Hideyuki Ogawa, Hokkaido
University
Kazuhiro Nishiwaki, Masahiro Iezawa,
Hideyuki Tanaka, Takashi Goto, Mitsubishi
Electric Corp.; Byeongil An, Mitsubishi
Heavy Industries, LTD.
Ambient Temperature (20°F, 72°F and 95°F)
Impact on Fuel and Energy Consumption
for Several Conventional Vehicles, Hybrid
and Plug-In Hybrid Electric Vehicles and
Battery Electric Vehicle
The Properties and Injector Nozzle Fouling
Performance of GTL and EN590 Diesel with
RME and SME biodiesel
Development of a Novel Approach for
Non-Intrusive Closed-Loop Heat Release
Estimation in Diesel Engines
Downspeeding a Light Duty Diesel
Passenger Car with a Combined
Supercharger and Turbocharger Boosting
System to Improve Vehicle Drive Cycle Fuel
Economy
(2013-01-1462)
(2013-01-1136)
(2013-01-0314)
(2013-01-0932)
Henning Lohse-Busch, Michael Duoba,
Eric Rask, Kevin Stutenberg, Argonne
National Laboratory; Vivek Gowri, Univ of
Washington; Lee Slezak, David Anderson,
US Dept of Energy
Stefan de Goede, Sasol Technology Fuels
Technology; Piet Roets, Adrian Velaers,
Sasol Fuels Technology; Jerrie Vermeulen,
Sasol Technology; Celeste Wilken, Sasol
Fuels Technology
Fabrizio Ponti, Vittorio Ravaglioli, Enrico
Corti, Davide Moro, University of Bologna;
Matteo De Cesare, Magneti Marelli SpA
Powertrain Division
Philip Wetzel, Eaton Corp.
The Measured Impact of Vehicle Mass on
Road Load and Energy Consumption for an
BEV, HEV and ICE Vehicle
Experimental Study of Combustion and
Emissions Characteristics of Methyl Oleate,
as a Surrogate for Biodiesel, in a Direct
Injection Diesel Engine
Virtual Combustion Phasing Target
Correction in the Knock Region for ModelBased Control of Multi-Fuel SI Engines
Experimental Evaluation of Advanced
Turbocharger Performance on a Light Duty
Diesel Engine
(2013-01-1457)
(2013-01-1142)
(2013-01-0307)
(2013-01-0920)
Richard ‘Barney’ Carlson, Idaho National
Laboratory; Henning Lohse-Busch,
Argonne National Laboratory; Jeremy Diez,
ECOtality North America; Jerry Gibbs, U.S.
Department of Energy
Valentin Soloiu, Jabeous Weaver, Henry
Ochieng, Marvin Duggan, Sherwin Davoud,
Brian Vlcek, Craig Jenkins, Georgia
Southern University; Christopher Butts,
USDA, ARS National Peanut Research Lab
Baitao Xiao, Shu Wang, Robert G. Prucka,
Clemson Univ
Harold Sun, David Hanna, Paul Niessen,
Brien Fulton, Ford Motor Company;
Liangjun Hu, ESI Group; Eric Curtis,
Jianwen Yi, Ford Motor Company
TIME
O2-33
W2-66
W2-69
(PFL100)
(PFL303)
of 2) (PFL501)
new fuels
sensing, etc.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:00 a.m.
Organizers:
GM Powertrain
Organizers:
Organizers:
McMaster Univ.; Xiaojian Yang; Guoming G.
Zhu, Michigan State Univ.
Organizers:
Eric Krivitzky, Concepts NREC; Marcello
Canova
Chairpersons:
George Karavalakis, Univ. of CaliforniaRiverside
10:00
a.m.
10:20
a.m.
10:40
a.m.
W2-67
Chairpersons:
Eric Krivitzky, Concepts NREC
Developing a Utility Factor for Battery
Electric Vehicles
Diesel Cold Start into Congested Real
World Traffic: Comparison of Diesel and
B100for Ozone Forming Potential
A Semi-Physical Artificial Neural Network
for Feed Forward Ignition Timing Control of
Multi-Fuel SI Engines
Behavior of an IC Engine Turbocharger in
Critical Conditions of Lubrication
(2013-01-1474)
(2013-01-1145)
(2013-01-0324)
(2013-01-0921)
Laboratory
Seyed Hadavi, Gordon E. Andrews, Hu
Li, Univ of Leeds; Grzegorz Przybyla,
Silesian University of Technology;
Mohammadmohsen Vazirian, Univ of Leeds
Baitao Xiao, Shu Wang, Robert G. Prucka,
Clemson Univ
J. Galindo, J.R. Serrano, V. Dolz, M. A.
López, Universitat Politècnica de València;
F. Bouffaud, RSA—Renault SA
Vehicle Modeling and Evaluation of the
Engine Options in Conventional and MildHybrid Powertrain
Optical Investigation of Post-injection
Strategy Impact on the Fuel Vapor within
the Exhaust Line of a Light Duty Diesel
Engine Supplied with Biodiesel Blends
Panel Discussion: Engine and Combustion
Modeling for Model-Based Control
Simulation Study of the Series Sequential
Turbocharging for Engine Downsizing and
Fuel Efficiency
(2013-01-1449)
(2013-01-1127)
Andrej Ivanco, Zoran Filipi, Clemson
University ICAR
Simona Silvia Merola, Istituto Motori
CNR; Andrea De Filippo, General Motors
Powertrain Europe; Gerardo Valentino,
Cinzia Tornatore, Luca Marchitto, Stefano
Iannuzzi, Istituto Motori CNR
Qingning Zhang, Chris Brace, Sam
Akehurst, Richard Burke, Univ of Bath;
Geoff Capon, Ford Motor Company Ltd;
Les Smith, Jaguar Land Rover Ltd; Steve
Garrett, Kai Zhang, Cummins Turbo
Technologies
Accounting for the Variation of Kinetic
Intensity Between Drivers in the Simulation
of Conventional and Advanced Vehicles
Effectiveness of Various Phenolic
Compounds (Commercial and NonCommercial) on Biodiesel Oxidation Stability
This panel discussion will bring together
a group of technical experts on controloriented model and model-based control
development. The panel discussion will
review the current status, challenges, and
the future direction on this subject for
various sub-systems of the automotive
powertrain and engine systems.
(2013-01-1453)
(2013-01-1128)
Jeremy S. Neubauer, Eric Wood, National
Renewable Energy Laboratory
Alexandros Deligiannis, Antonios
Anastasakos, George Anastopoulos,
George S. Dodos, Fanourios Zannikos,
National Technical Univ of Athens
11:00
a.m.
Microbiological Growth Study of Biodiesel
Fuel
10:01
p.m.
(2013-01-0935)
Moderators:
Zongxuan Sun, Univ. of Minnesota-Twin Cities
Panelists:
Zoran S. Filipi, Clemson University
Hossein Javaherian, General Motors LLC
Patrick C. Niven, Ricardo Inc.
Zongxuan Sun, Univ. of Minnesota-Twin Cities
Guoming G. Zhu, Michigan State University
EGR Systems Evaluation in Turbocharged
Engines
(2013-01-0936)
Lurun Zhong, Marc Musial, Ronald Reese,
Greg Black, Chrysler Group LLC
A Novel System for Reducing Turbo-Lag
by Injection of Compressed Gas into the
Exhaust Manifold
(2013-01-1148)
(2013-01-1310)
George S. Dodos, Fanourios Zannikos,
National Technical Univ of Athens
Dariusz Cieslar, Nick Collings, Paul
Dickinson, Keith Glover, Univ of Cambridge;
Alexander Darlington, AVL
Performance and Emission Studies of a Diesel
Engine Using Biodiesel Tyre Pyrolysis Oil
Blends (Written Only -- No Oral Presentation)
(2013-01-1150)
Abhishek Sharma, Bijay Dhakal, NIT
Rourkela,India
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-63
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
132
W2-64
W2-61
O2-43
Fuel & Additive Effects on SI
Engine Performance (PFL203)
of 3) (PFL216)
- Models for Controls (PFL208)
This session focuses on the impact of
conventional and alternative fuels as well as
fuel additives on the operation, performance
and emissions of SI engines. Papers focus
on the impact of bio-derived fuels (ethanol,
butanol and others) on engine design and
performance as well as gasoline properties
and additives, and their impact.
are also encouraged
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 9:20 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
Technology; Shailesh Martin Lopes, General
Motors
Organizers:
University
Organizers:
Norbert Meyer, dSPACE GmbH; Federico
Schernus, FEV GmbH; Per Tunestal, Lund
University
Organizers:
Cellulosic Ethanol Fuel Quality Evaluation
and its Effects on PFI Intake Valve Deposits
and GDI Fuel Injector Plugging Performance
RCCI Engine Operation Towards 60%
Thermal Efficiency
Mean Value Engine Model Including Spark
Timing for Powertrain Control Application
Evaluation of Different Tabulation
Techniques Dedicated to the Prediction of
the Combustion and Pollutants Emissions
on a Diesel Engine with 3D CFD
(2013-01-0885)
(2013-01-0279)
(2013-01-0247)
(2013-01-1093)
Michael Russell, Jill Cummings, Timothy
Cushing, William Studzinski, General Motors
Company
Derek Splitter, Martin Wissink, Dan
DelVescovo, Rolf Reitz, Univ of Wisconsin
Hadi Adibi Asl, Mohammadreza Saeedi,
Roydon Fraser, Univ of Waterloo; Paul
Goossens, Maplesoft; John McPhee, Univ
of Waterloo
Lionel Martinez, Jean-Baptiste Michel,
Stephane Jay, Olivier Colin, IFP Energies
nouvelles
Effects of Gasoline and Ethanol Fuel
Corrosion Inhibitors on Powertrain Intake
Valve Deposits
Effect of Piston Bowl Geometry on Dual
Fuel Reactivity Controlled Compression
Ignition (RCCI) in a Light-Duty Engine
Operated with Gasoline/Diesel and
Methanol/Diesel
The Development of Real-time NOx
Estimation Model and its Application
Surrogate Diesel Fuel Models for Low
Temperature Combustion
(2013-01-0893)
(2013-01-0264)
(2013-01-0243)
(2013-01-1092)
Elana Chapman, Jill Cummings, Douglas
Conran, General Motors Company
Adam B. Dempsey, N. Ryan Walker, Rolf
Reitz, Univ. of Wisconsin
Junyong Lee, Seungha Lee, Wonah Park,
Kyoungdoug Min, Han Ho Song, Seoul
National Univ.; Hoimyung Choi, Advanced
Institutes of Convergence Tech.; Jun Yu,
Hyundai Motor Group; Sung Hwan Cho,
Hyundai-Kia America Technical Center Inc
Anand Krishnasamy, Rolf D. Reitz,
University of Wisconsin; Werner Willems,
Ford Forschungszentrum Aachen GmbH;
Eric Kurtz, Ford Motor Co
Development of Gasoline Combustion
Reaction Model
Efficiency and Emissions Mapping of RCCI
in a Light-Duty Diesel Engine
EGR Rate Estimation for Cylinder Air
Charge in a Turbocharged Diesel Engine
using an Adaptive Observer
Influence of Liquid Penetration Metrics on
Diesel Spray Model Validation
(2013-01-0887)
(2013-01-0289)
(2013-01-0246)
(2013-01-1102)
Kohtaro Hashimoto, Honda R&D Co., Ltd.;
Mitsuo Koshi, Akira Miyoshi, The University
of Tokyo; Yoshinori Murakami, Hachinohe
National College of Technology; Tatsuo
Oguchi, Toyohashi University of Technology;
Yasuyuki Sakai, Hiromitsu Ando, University
of Fukui; Kentaro Tsuchiya, AIST
Scott Curran, Reed Hanson, Robert
Wagner, Oak Ridge National Laboratory;
Rolf Reitz, University of Wisconsin
Hyunjun Lee, Yeongseop Park, Seungwoo
Hong, Minkwang Lee, Myoungho Sunwoo,
Hanyang Univ.
Gina M. Magnotti, Caroline L. Genzale,
Georgia Institute of Technology
The Effect of Direct Injection Timing and
Pressure on Engine Performance in an
Ethanol Direct Injection Plus Gasoline Port
Injection (EDI+GPI) SI Engine
Drive Cycle Emissions and Fuel Economy
Estimations Using Vehicle Systems
Simulations
Development of High Level Modeling
Method for Rapid Modeling Process
Kinetic Modeling of Soot Formation with
Highlight in Effects of Surface Activity on
Soot Growth for Diesel Engine Partially
Premixed Combustion
(2013-01-0892)
(Oral Only)
(2013-01-0244)
(2013-01-1104)
Yuan Zhuang, Guang Hong, University of
Technology, Sydney
Scott Curran, Zhiming Gao, Robert Wagner,
Oak Ridge National Laboratory
Hisahiro Ito, Hironori Yohata, Junichi Kako,
Yukio Kuroda, Toyota Motor Corporation
Feiyang Zhao, Wenbin Yu, Yiqiang Pei,
Wanhua Su, Tianjin University
The Effect of Charge Cooling on the RON of
Ethanol/Gasoline Blends
Influencing Parameters of Brake Fuel
Conversion Efficiency with Diesel / Gasoline
Operation in a Medium-Duty Diesel Engine
A Computational Investigation of the Effects
of Swirl Ratio and Injection Pressure on
Mixture Preparation and Wall Heat Transfer
in a Light-Duty Diesel Engine
(2013-01-0886)
(2013-01-0273)
(2013-01-1105)
Tien Mun Foong, Kai J. Morganti, Michael
J. Brear, Gabriel da Silva, Yi Yang, The
University of Melbourne; Frederick L. Dryer,
Princeton University
Jiafeng Sun, Joshua A. Bittle, Timothy J.
Jacobs, Texas A&M University
Federico Perini, Adam Dempsey, Rolf Reitz,
University of Wisconsin-Madison; Dipankar
Sahoo, Sandia National Laboratories;
Benjamin Petersen, Ford Motor Company;
Paul Miles, Sandia National Laboratories
The Impact of Low Octane Hydrocarbon
Blending Streams on the Knock Limit of
“E85”
A Comparison of Lean Operation and
Exhaust Gas Recirculation: Thermodynamic
Reasons for the Increases of Efficiency
Analysis of Turbulence Model Effect on the
Characterization of the In-Cylinder Flow
Field in a HSDI Diesel Engine
(2013-01-0888)
(2013-01-0266)
(2013-01-1107)
James P. Szybist, Brian H. West, Oak Ridge
National Laboratory
Jerald A. Caton, Texas A&M Univ.
Stefano Fontanesi, Giuseppe Cicalese,
Elena Severi, Univ of Modena and Reggio
Emilia
Chairpersons:
Norbert Meyer, dSPACE GmbH; Per
Tunestal, Lund University
TIME
W2-63
10:00
a.m.
10:20
a.m.
10:40
a.m.
W2-64
W2-61
O2-43
Fuel & Additive Effects on SI
Engine Performance (PFL203)
of 3) (PFL216)
- Models for Controls (PFL208)
This session focuses on the impact of
conventional and alternative fuels as well as
fuel additives on the operation, performance
and emissions of SI engines. Papers focus
on the impact of bio-derived fuels (ethanol,
butanol and others) on engine design and
performance as well as gasoline properties
and additives, and their impact.
are also encouraged
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 9:20 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
Technology; Shailesh Martin Lopes, General
Motors
Organizers:
University
Organizers:
Norbert Meyer, dSPACE GmbH; Federico
Schernus, FEV GmbH; Per Tunestal, Lund
University
Organizers:
Chairpersons:
Norbert Meyer, dSPACE GmbH; Per
Tunestal, Lund University
Octane Response of PremiumRecommended Vehicles
Low Temperature Combustion Strategies for
Compression Ignition Engines: Operability
limits and Challenges
Modeling of Conventional and Early Diesel
Injection Combustion Characteristics using
FGM Approach
(2013-01-0883)
(2013-01-0283)
(2013-01-1108)
Arjun Prakash, Aaron Jones, Edward
Nelson, James Macias, Shell Global
Solutions (US) Inc; Eugene Jimenez,
Matthew Hinojosa, Southwest Research
Institute
Usman Asad, Prasad Divekar, Ming Zheng,
University of Windsor; Jimi Tjong, Ford
Motor Company
Sridhar Ayyapureddi, Ulaş Egüz, Cemil
Bekdemir, Bart Somers, Philip de Goey,
Eindhoven University of Technology;
Bogdan Albrecht, DAF Trucks NV
Lubricating Oil Consumption On the
Standard Road Cycle
Design of a 4-Cylinder GTDI Engine with
Part-Load HCCI Capability
Multi-Dimensional Modeling and Validation
of Combustion in a High-Efficiency DualFuel Light-Duty Engine
(2013-01-0884)
(2013-01-0287)
(2013-01-1091)
Brian West, C. Scott Sluder, Oak Ridge
National Laboratory
Jennifer Wheeler, Dusan Polovina, Vasile
Frasinel, AVL Powertrain Engineering Inc;
Oliver Miersch-Wiemers, Alan Mond, Jeff
Sterniak, Hakan Yilmaz, Robert Bosch LLC
Zihan Wang, Riccardo Scarcelli, Sibendu
Som, Steven McConnell, Argonne National
Laboratory; Nameer Salman, York Zhu,
Ken Hardman, Kevin Freeman, Ronald
Reese, Chrysler Group LLC; P. K. Senecal,
Mandhapati Raju, Shawn Givler, Convergent
Science Inc
A Representative Testing Methodology
for System Influence on Automotive Fuel
Filtration
Analysis of Cyclic Variability of Heat Release
for High-EGR GDI Engine Operation with
Observations on Implications for Effective
Control
A Comprehensive Combustion Model for
Biodiesel-Fueled Engine Simulations
(2013-01-0891)
(2013-01-0270)
(2013-01-1099)
Sumit Khadilkar, Ahmed Soliman, UNC
Charlotte Motorsports Engineering; Peter
Schuetzbach, Marko Kustic, Robert Bosch
GmbH
Brian Kaul, Robert Wagner, Johney Green,
Jessica Brakora; Rolf Reitz, Univ of
Wisconsin
11:00
a.m.
Simulation of a Heavy Duty Diesel Engine
Fueled with Soybean Biodiesel Blends in
Low Temperature Combustion
(2013-01-1100)
Youngjae Lee, Kwonwoo Jang, Karam Han,
Kang Y. Huh, Pohang Univ. of Science and
Technology; Seungmook Oh, KIMM
11:20
a.m.
Dynamic Chemical Mechanism Reduction
for Internal Combustion Engine Simulations
(2013-01-1110)
Mandhapati P. Raju, Mingjie Wang, P. K.
Senecal, Convergent Science Inc.
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-70
O2-35/36
O2-44
W2-68
Natural Gas Engines and Vehicles
(PFL106)
Modeling (PFL608)
Advanced Battery Technologies
Components (Part 1 of 3)
(PFL500)
This session covers fuel injection,
combustion, controls, performance and
emissions of SI engines fueled with methane
based fuels such as natural gas, producer
gas, coke oven gas or hydrogen-natural gas
blends. Diesel-natural gas dual-fuel engines
will also be presented.
driveline modeling, including topics related
to transmission hardware, software, and
system integration
The success of HEV’s, PHEV’s & EV’s is
highly dependent on their batteries. This
session focuses on advanced battery
technologies, including, but not limited to:
advanced materials and cell chemistries,
battery management systems and controls,
modeling, testing, diagnosis and health
monitoring, safety, reliability, durability, battery
charging, battery economics/cost reduction,
and system integration/optimization. These
topics can be addressed at the cell, module,
pack or vehicle levels.
This session covers topics regarding new
CI and SI engines and components. This
includes analytical, experimental, and
computational studies covering hardware
development as well as design and analysis
techniques.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:00 a.m.
8:20 a.m. - 11:20 a.m.
8:20 a.m. - 11:40 a.m.
Organizers:
Riccardo Scarcelli, Argonne National
Laboratory; Patric Ouellette, Westport
Innovations Inc.; Thomas Wallner, Argonne
National Laboratory; Chris Hagen, Oregon
State Univ.
Organizers:
James Hendrickson, General Motors LLC;
Berthold Martin, Chrysler Group LLC; ChinYuan Perng, Ford Motor Co.
Organizers:
Neil M. Johnson, Ricardo Inc.; James Miller,
Argonne National Laboratory; Yi Ding, US
Army; Xiaosong Huang, General Motors;
Thomas Wang, GM Technical Center;
Xinran Xiao, Michigan State University;
Alvaro Masias, Ford Motor Co.; Wayne Cai,
General Motors
Organizers:
Jeffrey Naber, Michigan Tech. University;
James E. Smith, West Virginia Univ.;
John Szpytman, Continental Automotive
Systems; Bryon Wasacz, Chrysler Group
LLC
Chairpersons:
Neil Johnson, Ricardo Inc
8:00
a.m.
Development of Advanced Light-Duty
Powertrain and Hybrid Analysis Tool
(Oral Only)
(2013-01-0808)
John M. Lapetz
Byungho Lee, SoDuk Lee, Jeff Cherry,
Anthony Neam, James Sanchez, Ed Nam,
US Environmental Protection Agency
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
134
Analysis of Thermal Load for Dry Clutch
under the Frequent Launching Condition
Simplified Extended Kalman Filter Observer
for SOC Estimation of Commercial PowerOriented LFP Lithium Battery Cells
A Study on the Dynamic Characteristics
of a Single-body Hydraulic Lash Adjuster
under Aeration
(2013-01-0814)
(2013-01-1544)
(2013-01-1723)
Shaohua Sun, Yulong Lei, Yao Fu, Cheng
Yang, ShunBo Li, State Key Lab. of ASC,
Jilin University
Tarun Huria, Massimo Ceraolo, Università
di Pisa; Javier Gazzarri, Robyn Jackey,
MathWorks
Kenta Yoshii, Masaru Kawano, Nagao
Yanagisawa, Honda R&D Co.,Ltd.
Reducing the Cycle-Cycle Variability of
a Natural Gas Engine Using Controlled
Ignition Current
Forward-Looking Simulation of the GM FrontWheel Drive Two-Mode Power-Split HEV
Using a Dynamic Programming-Informed
Equivalent Cost Minimization Strategy
Improved SOC Estimation for Lithium-Ion
Cells Valid for Different Temperatures and
States-of-Health
Dynamic Characteristic Calibration of a
Hydraulic Lash Adjuster Model Using Unit
Excitation Test
(2013-01-0862)
(2013-01-0815)
(2013-01-1537)
(2013-01-1731)
Jessica Dahlstrom, Per Tunestal, Bengt
Dekun Pei; Michael Leamy, Georgia Institute
of Technology
Patrick Wesskamp, Manuel Fischnaller,
Nils Lohmann, Joachim Melbert, Thomas
Musch, Ruhr-University Bochum
Yuki Sano, Nagao Yanagisawa, Motoyasu
Sakaguchi, Kenta Yoshii, Honda R&D Co
Ltd
Cold Performance Challenges with CNG
PFI Injectors
Development and Implementation of
Hardware In the Loop Simulation for Dual
Clutch Transmission Control Units
Extraction of Battery Parameters for Optimal
Performance Using the Circuit Model with a
Multi-Objective Genetic Algorithm
Assessing the Propensity for Valve Train
Tick Noise
(2013-01-0863)
(2013-01-0816)
(2013-01-1540)
(2013-01-1737)
Nicolo Cavina, Davide Olivi, Enrico Corti, Giorgio
Raul Bircann, Youssef Kazour, Kenneth
Mancini, University of Bologna; Luca Poggio,
Dauer, Mahoro Fujita, Allan Wells, Daniel
Francis Kabasin, Harry Husted, Delphi Corp. Francesco Marcigliano, Ferrari Auto SpA
Jonathan Brand, Zheming Zhang, Ramesh
K. Agarwal, Washington Univ. St. Louis
Bruce K. Geist, William Resh, Scott Fisher,
Ian McLean, Mark Hannon, Chrysler Group
LLC
Performance and Emissions of a
Turbocharged Spark Ignition Engine Fuelled
with CNG and CNG/Hydrogen Blends
Development and Validation of a Forklift
Truck Powertrain Simulation
Battery Model Parameter Estimation Using
a Layered Technique: An Example Using a
Lithium Iron Phosphate Cell
Calibrating an Adaptive Pivoting Vane Pump
to Deliver a Stepped Pressure Profile
(2013-01-0866)
(2013-01-0817)
(2013-01-1547)
(2013-01-1729)
Mirko Baratta, Stefano D’Ambrosio, Daniela
Anna Misul, Politecnico di Torino
Martin Murtagh, Robert Kee, Geoffrey
McCullough, Charles Stuart, Conor Bradley,
Queen’s University of Belfast; Stephen
Trimble, Matthew Allen, Chenyao Chen,
Alan Kolkemo, NACCO Material Handling
Group; Drew Reichenbach, AVL Powertrain
Engineering, Inc.
Robyn Jackey, Michael Saginaw, Pravesh
Sanghvi, Javier Gazzarri, MathWorks; Tarun
Huria, Massimo Ceraolo, Università di Pisa
Bruce Geist, William Resh, Kiranmaye Aluru,
Chrysler Group LLC
Knock and Emission Characteristics of
Heavy-Duty HCNG Engine with Modified
Compression Ratios
Experimental Characterization and Modeling
of Dry Dual Clutch Thermal Expansion
Effects
AutoLion™: A Thermally Coupled
Simulation Tool for Automotive Li-Ion
Batteries
Challenge Determining a Combustion
System Concept for Downsized SI-engines
- Comparison and Evaluation of Several
Options for a Boosted 2-cylinder SI-engine
(2013-01-0845)
(2013-01-0818)
(2013-01-1522)
(2013-01-1730)
Gihun Lim, University of Science and
Technology; Sungwon Lee, Cheolwoong
Park, Young Choi, Changgi Kim, Korea
Institute of Machinery & Materials
Matija Hoic, Zvonko Herold, Nenad
Kranjcevic, Josko Deur, Univ of Zagreb;
Vladimir Ivanovic, Ford Motor Co.
Jim Kalupson, Gang Luo, Christian E.
Shaffer, EC Power
Alexander Eichhorn, David Lejsek,
Alexander Hettinger, Andreas Kufferath,
Robert Bosch GmbH
Characterization of CH4 and CH4/
H2 Mixtures Combustion in a Small
Displacement Optical Engine
Development of an Analytical Modeling
Method and Testing Procedures to Aid
in the Design of Cardan Joints for Front
Steerable Beam Axles
Computer-Aided Engineering and
Experimental Diagnostics of Vehicle
Batteries
The New Powertrain Virtual Analysis
Process in Engine Design and Development
(2013-01-0852)
(2013-01-0819)
(Oral Only)
(2013-01-1720)
Francesco Catapano, Silvana Di Iorio, Paolo
Sementa, Bianca Maria Vaglieco, Istituto
Motori CNR
Gerald Thom, Chrysler Group LLC; Alan
Sheets, Altair Product Design; Frederick F.
Brendel, Kah Wah Long, Chrysler Group LLC
Chao-Yang Wang, Penn State UnivUniversity Park; Yan Ji; Wei Zhao; Lei Cao
Yi-Hsin Chen, William Resh, Hong Geng,
Simon Shi, Jaspal Sandhu, Darryl Muir,
Chrysler Group LLC
TIME
W2-70
O2-35/36
O2-44
W2-68
Natural Gas Engines and Vehicles
(PFL106)
Modeling (PFL608)
(PFL500)
This session covers fuel injection,
combustion, controls, performance and
emissions of SI engines fueled with methane
based fuels such as natural gas, producer
gas, coke oven gas or hydrogen-natural gas
blends. Diesel-natural gas dual-fuel engines
will also be presented.
driveline modeling, including topics related
to transmission hardware, software, and
system integration
techniques.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:00 a.m.
8:20 a.m. - 11:20 a.m.
8:20 a.m. - 11:40 a.m.
Organizers:
Riccardo Scarcelli, Argonne National
Laboratory; Patric Ouellette, Westport
Innovations Inc.; Thomas Wallner, Argonne
National Laboratory; Chris Hagen, Oregon
State Univ.
Organizers:
James Hendrickson, General Motors LLC;
Berthold Martin, Chrysler Group LLC; ChinYuan Perng, Ford Motor Co.
Organizers:
Neil M. Johnson, Ricardo Inc.; James Miller,
Argonne National Laboratory; Yi Ding, US
Thomas Wang, GM Technical Center;
Xinran Xiao, Michigan State University;
Alvaro Masias, Ford Motor Co.; Wayne Cai,
General Motors
Organizers:
LLC
Chairpersons:
Neil Johnson, Ricardo Inc
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
Impact of Supplemental Natural Gas on
Engine
Efficiency, Performance, and Emissions
Mathematical Analysis of Influence of Oil
Temperature on Efficiencies in Hydraulic
Pumps for Automatic Transmissions
A ‘Microscopic’ Structural Mechanics
FE Model of a Lithium-Ion Pouch Cell for
Quasi-Static Load Cases
Development of the Combustion System for
the General Motors Fifth Generation “Small
Block” Engine Family
(2013-01-0847)
(2013-01-0820)
(2013-01-1519)
(2013-01-1732)
Claire Maxey, Vickey Kalaskar, The
Pennsylvania State University; Dongil Kang,
Andre Boehman, University of Michigan
Yoshiharu Inaguma, Naohito Yoshida,
JTEKT Corp
Christoph Breitfuss, Wolfgang Sinz,
Florian Feist, Gregor Gstrein, Bernhard
Lichtenegger, Christoph Knauder, Christian
Ellersdorfer, Joerg Moser, Hermann Steffan,
Graz University of Technology; Michael
Stadler, AUDI AG; Peter Gollob, Volker
Hennige, AVL LIST GmbH
Scott Halsall, Kevin Luchansky, Yangbing
Zeng, Richard Davis, Ronald Herrin, General
Motors Company
The Influence of Crevices on Hydrocarbon
Emissions from a Diesel-Methane Dual Fuel
Engine
The Simscape Language and Powertrain
Applications
Fast Ion Conducting Electrolyte Based on
Li7La3Zr2O12 Garnet: Enabling a New
Class of Electrochemical Energy Storage
Development of New V6 3.5L Gasoline
Engine for ACURA RLX
(2013-01-0848)
(2013-01-0822)
(Oral Only)
(2013-01-1728)
Fredrik Königsson, Johannes Kuyper,
Per Stalhammar, AVL Sweden; Hans-Erik
Angstrom, Royal Institute of Technology
Jyh-Shin Chen, General Motors Company
jeff sakamoto, msu
Nobuo Suzuki, Honda R&D Co., Ltd.;
Yasutaka Hayashi, Marc Odell, Tatsuhito
Esaki, Honda R&D Americas, Inc.; Atsushi
Sato, Kazuya Ishiki, Satoshi Watanabe,
Honda R&D Co., Ltd.
Experimental Investigation of Cycle-byCycle Variations in a Natural Gas/Diesel
Dual Fuel Engine with EGR
Application Enabling LTO Based Batteries:
Technical and Cost Benefits for Motive
Applications
Development of New L4 2.4L Gasoline
Engine for 2013 Model Year ACCORD
(2013-01-0853)
(Oral Only)
(2013-01-1734)
Lu Sun, Yifu liu, Lei Zhou, Ke Zeng, Xi’an
Jiaotong University
Evan House, EIG; Timothy E. Coogan, EIG
America Inc.
Yasuhiro Motohashi; Kenji Kubota;
Nobuyuki Akaishi; Kazuya Ishiki; Takashi
Iwamoto; Masakazu Kinoshita
Analysis of Transient Compressible Gas Jets
Using High Speed Schlieren Imaging
Development of New Gasoline Engine for
ACCORD Plug-in Hybrid
(2013-01-0871)
(2013-01-1738)
Lars Christian Riis Johansen, Eugenio de
Benito Sienes, Petter Dahlander, Chalmers
University of Technology
Akiyuki Yonekawa, Masaki Ueno, Osamu
Watanabe, Naohiro Ishikawa, Honda R&D
Co. Ltd.
10:01
p.m.
Powershift Differential Transmission with
Three Flows of Power for Construction
Machines (Written Only -- No Oral
Presentation)
(2013-01-0826)
Jaroslav Pitonak, University of Zilina
10:02
p.m.
Analysis of a Shift Quality Metric for a Dual
Clutch Transmission (Written Only -- No Oral
Presentation)
(2013-01-0825)
Huabing Zeng, Yulong Lei, Yao Fu, Yongfa
Li, State Key Lab. of ASC, Jilin University;
Wanhua Ye, Chongqing Tsingshan Industry
Co. Ltd.
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-65
W2-61
Modeling of SI and Diesel Engines
- Thermodynamics and General
Engine Modeling (PFL208)
conditions.
9:00 a.m. - 11:40 a.m.
9:20 a.m. - 11:00 a.m.
Organizers:
of Windsor
Organizers:
Kevin L. Hoag, University Of Wisconsin
Madison; Federico Millo, Politecnico
di Torino; Thomas Morel, Gamma
Technologies Inc.; Christof Schernus, FEV
GmbH; Brad R. Tillock, EngSim Corporation
Chairpersons:
Song-Charng Kong, Iowa State University;
9:00
a.m.
Exploring a Gasoline Compression Ignition
(GCI) Engine Concept
(2013-01-0911)
K.D. Rose, J. Ariztegui, R.F. Cracknell, T.
Dubois, H.D.C. Hamje, L. Pellegrini, D.J.
Rickeard, CONCAWE; B. Heuser, Institute
for Combustion Engines, RWTH Aachen
University; T. Schnorbus, A.F. Kolbeck,
FEV GmbH
9:20
a.m.
9:40
a.m.
10:00
a.m.
10:20
a.m.
10:40
a.m.
Study of In-cylinder Combustion and
Compression Ignition Engine Performance
Using Different RON Fuels
Fuel Consumption Optimization and Noise
Reduction in a Spark-Ignition Turbocharged
VVA Engine
(2013-01-0900)
(2013-01-1625)
Bishwadipa Das Adhikary, Univ. of
Wisconsin-Madison; Rolf Reitz, Univ
of Wisconsin-Madison; Stephen Ciatti,
Vincenzo De Bellis, Universita’ di Napoli;
Fabio Bozza, Universita’ di Napoli - Ist
Motori CNR; Daniela Siano, Istituto Motori
CNR; Alfredo Gimelli, Universita’ di Napoli
Comparison of Negative Valve Overlap
(NVO) and Rebreathing Valve Strategies on
a Gasoline PPC Engine at Low Load and
Idle Operating Conditions
Application of Modeling Technology in a
Turbocharged SI Engine
(2013-01-0902)
(2013-01-1621)
Patrick Borgqvist, Per Tunestal, Bengt
Lurun Zhong, Marc Musial, William Resh,
Kanwerdip Singh, Chrysler Group LLC
Experimental Investigation on the
Combustion and Emissions of a Light Duty
Diesel Engine Fuelled with Butanol-Diesel
Blend
How to Improve Light Duty Diesel Based
on Heavy Duty Diesel Thermodynamic
Analysis?
(2013-01-0915)
(2013-01-1623)
Gerardo Valentino, Stefano Iannuzzi, Felice
Esposito Corcione, Istituto Motori CNR
Matthieu Lecompte, Louis-Marie Malbec,
Gregory Font, Bruno Walter, IFP Energies
Nouvelles
Premixed Charge of n-Butanol Coupled
with Direct Injection of Biodiesel for an
Advantageous Soot-NOx Trade-Off
Investigation of Extreme Mean Effective
and Maximum Cylinder Pressures in a
Passenger Car Diesel Engine
(2013-01-0916)
(2013-01-1622)
Valentin Soloiu, Marvin Duggan, Henry
Ochieng, Spencer Harp, Jabeous Weaver,
Craig Jenkins, Brian Vlcek, Georgia
Southern University
Peter Eilts, Claude-Pascal StoeberSchmidt, René Wolf, Technical University of
Braunschweig
Analysis of Surrogate Fuels Effect on Ignition Dynamic Analysis of the Libralato
delay and Low Temperature Reaction during Thermodynamic Cycle Based Rotary Engine
Partially Premixed Combustion
(2013-01-0903)
(2013-01-1620)
Hadeel Solaka, Martin Tuner, Bengt
Guangyu Dong, Xiaoran Han, Richard
Stobart, Shuo Lu, Loughborough Univ
136
The purpose of this session is to provide an
open exchange of ideas. Remarks made by
participants or members of the audience
cannot be quoted or attributed to the
individual or their company unless express
permission has been granted by the individual
and their company. Any record of remarks,
discussion, or photographs may not be used
unless express permission has been granted
TIME
W2-65
W2-61
Modeling of SI and Diesel Engines
- Thermodynamics and General
Engine Modeling (PFL208)
conditions.
9:00 a.m. - 11:40 a.m.
9:20 a.m. - 11:00 a.m.
Organizers:
of Windsor
Organizers:
Kevin L. Hoag, University Of Wisconsin
Madison; Federico Millo, Politecnico
di Torino; Thomas Morel, Gamma
Technologies Inc.; Christof Schernus, FEV
GmbH; Brad R. Tillock, EngSim Corporation
Chairpersons:
Song-Charng Kong, Iowa State University;
11:00
a.m.
Recognizing Outstanding
Achievements by Mobility
Engineering Professionals
Investigation of Low-Temperature
Combustion in An Optical Engine Fueled
with Low Cetane Sasol JP-8 Fuel Using
OH-PLIF and HCHO Chemiluminescence
Imaging
(2013-01-0898)
Kan Zha, Xin Yu, Ming-Chia Lai, Marcis
Jansons, Wayne State University
11:20
a.m.
Renewable Ethanol Use for Enabling High
Load Clean Combustion in a Diesel Engine
(2013-01-0904)
Xiaoye Han, Univ of Windsor; Jimi Tjong,
Ford Motor Co; Meiping Wang, Graham
Reader, Ming Zheng, Univ of Windsor
10:01
p.m.
Optimization of a High Speed Gasoline
Engine Using Genetic Algorithm (Written
(2013-01-1626)
Jing Yang, Zhixiong Zhang, Lifeng chen, Yi
Wang, Hunan Univ
Lubricants Activity
Lubricants Activity
sae.org
Nominate today!
www.sae.org/awards
P110384
TIME
O2-44
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
O2-33
W2-67
W2-65
(PFL100)
of 2) (PFL501)
Fuel Injection and Sprays (Part 1
of 3) (PFL210)
monitoring, safety, reliability, durability,
battery charging, battery economics/
cost reduction, and system integration/
optimization. These topics can be
addressed at the cell, module, pack or
vehicle levels.
This session is devoted to experimental
and computational work in the area of
fuel injection systems and sprays. Topics
include: spray characterization, cavitation,
multi-phase jet modeling, CFD models
for spray processes, wall films and
impingement, hydraulic circuit analysis,
and dissolved gas effects. Studies of both
gasoline and diesel fuel sprays and fuel
injection equipment are encouraged.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Wayne Cai, General Motors; Yi Ding, US
Neil M. Johnson, Ricardo Inc.; Alvaro
Masias, Ford Motor Co.; James Miller,
Argonne National Laboratory; Thomas
Wang, GM Technical Center; Xinran Xiao,
Michigan State University
Organizers:
GM Powertrain
Organizers:
Concepts NREC; Marcello Canova; Eric
Krivitzky, Concepts NREC
Organizers:
Tarek M. Abdel-Salam, East Carolina
University; Essam El-Hannouny, Argonne
National Laboratory; Jacqueline O’Connor,
Characterizing Thermal Behavior of an
Air-Cooled Lithium-Ion Battery System for
Hybrid Electrical Vehicle Applications Using
Finite Element Analysis Approach
Engine Control Unit Modeling with Engine
Feature C Code for HEV Applications
Numerical Investigation of Nozzle
Clearance’s Effect on a Radial Turbine:
Aerodynamic Performance and Forced
Response
Effects of Cavitation in Common-Rail Diesel
Nozzles on the Soot Formation Process
(2013-01-1520)
(2013-01-1451)
(2013-01-0918)
(2013-01-1602)
Engineering Inc.
Alexander Zaremba, Philip Lechowicz, Mark
Jennings, Ford Motor Co.
Liangjun Hu, ESI Mindware Inc; Harold Sun,
Jianwen Yi, Eric Curtis, Anthony Morelli, Ford
Motor Co; Jizhong Zhang, National Key Lab
of Turbocharger; Ben Zhao, Ce Yang, Xin Shi,
Shangtao Liu, Beijing Institute of Technology
Francisco Payri, J. Javier Lopez, Antonio
Garcia, Oscar A. de la Garza de Leon, CMT
Motores Termicos UPV; Sebastien Houille,
Peugeot Citroen Automobiles SA
A Model Parameter Identification Method for
Battery Applications
Optimal Online Energy Management for
Diesel HEV: Robustness to Real Driving
Conditions
TVS® Supercharger – V-Series
Development for Single and Compound
Boosted Engines
4th Generation Diesel Common Rail System:
Realizing Ideal Structure Function for Diesel
Engine
(2013-01-1529)
(2013-01-1471)
(2013-01-0919)
(2013-01-1590)
Xiao Hu, Lewis Collins, Scott Stanton,
ANSYS Inc.; Shugang Jiang, A&D
Technology Inc
Laurent Thibault, Thomas Leroy, IFP
Energies Nouvelles
Michael Froehlich, Nathan Stewart, Eaton
Corp - Vehicle Group
Shuichi Matsumoto, DENSO Corp; Charles
Klose, Deere & Company; Jason Schneider,
John Deere & Co; Noriaki Nakane, DENSO
Corp; Daiji Ueda, DENSO International
America, Inc.; Shigeyuki Kondo, DENSO Corp
Modeling and Validation of Lithium-Ion
Automotive Battery Packs
Application of an Optimal Control Problem
to a Trip-Based Energy Management for
Electric Vehicles
Eliminating Engine Performance
Degradation Over Time Through
Compressor Redesign
Effect of Jet-Jet Interactions on the Liquid
Fuel Penetration in an Optical Heavy-Duty
DI Diesel Engine
(2013-01-1539)
(2013-01-1465)
(2013-01-0923)
(2013-01-1615)
SoDuk Lee, Byungho Lee, Joseph
McDonald, Edward Nam, US Environmental
Protection Agency
Thomas Juergen Boehme, Florian Held,
Christoph Rollinger, Heiko Rabba, Matthias
Schultalbers, IAV Automotive Engineering;
Bernhard Lampe, University of Rostock
Eric Krivitzky, Concepts NREC; Masashi
Yamamoto, Mitsubishi FUSO Truck and
Bus Corp.
Guillaume Lequien, Edouard Berrocal,
Yann Gallo, Augusto Themudo e Mello,
Oivind Andersson, Bengt Johansson, Lund
University
Impact of Temperature on the A123 Li-Ion
Battery Performance and Hybrid Electric
Vehicle Range
Enabling Integrated Powertrain Experiments
in Networked Distributed Laboratories
Meanline Modelling of Radial Turbine
Performance for Turbocharger Simulation
and Diagnostic Applications
Optical Investigation of Injection and
Combustion Phases of a Fouled Piezoelectric
Injector in a Transparent CR Diesel Engine
(2013-01-1521)
(Oral Only)
(2013-01-0924)
(2013-01-1591)
Ehsan Samadani, Josh Lo, Michael Fowler,
Roydon Andrew Fraser, Leonardo Gimenez,
University of Waterloo
Tulga Ersal, Youngki Kim, Jason Siegel,
Ashwin Salvi, Univ of Michigan; Mark
Brudnak, US Army TARDEC; Anna
Stefanopoulou, University of Michigan;
Jeffrey Stein, Univ of Michigan-Ann Arbor;
Zoran Filipi, Clemson University
Nikolaos Sakellaridis, Dimitrios Hountalas,
NTUA, School of Mechanical Engineering
Agnese Magno, Univ. Federico II - Istituto
Motori CNR; Ezio Mancaruso, Bianca Maria
Vaglieco, Istituto Motori CNR
Charge Capacity Versus Charge Time
in CC-CV and Pulse Charging of Li-Ion
Batteries
Regenerative Braking Control Enhancement
for the Power Split Hybrid Architecture
with the Utilization of Hardware-in-the-loop
Simulations
Uncertainty and Measurement Sensitivity of
Turbocharger Compressor Gas Stands
Relation Between Tip Penetration and
Droplet Size of Diesel Spray
(2013-01-1546)
(2013-01-1466)
(2013-01-0925)
(2013-01-1599)
Rami Abousleiman, Chrysler Group LLC;
Abdullah Al-Refai, Osamah Rawashdeh,
Oakland University
Kerem Bayar, Ryan McGee, Hai Yu, Dale
Crombez, Ford Motor Co
Erwann Guillou, Honeywell Turbo
Technologies
Keisuke Komada, Daisaku Sakaguchi,
Nagasaki University; Hiroshi Tajima, Kyushu
Univ; Hironobu Ueki, Masahiro Ishida,
Nagasaki University
Hardware-in-the-Loop Test of Battery
Management Systems
Performance Improvement of a Two Speed
EV through Combined Gear Ratio and Shift
Schedule Optimization
1-D Model of Roots Type Supercharger
Use of Low-Pressure Direct-Injection for
(RCCI) Light-Duty Engine Operation
(2013-01-1542)
(2013-01-1477)
(2013-01-0927)
(2013-01-1605)
Hagen Haupt, Joerg Bracker, Markus
Ploeger, dSPACE GmbH
Xingxing Zhou, Paul Walker, Nong Zhang,
FEIT, University of Technology; Bo Zhu,
BAIC Motor Electric Vehicle Co Ltd
Pavel Brynych, Jan Macek, Oldrich Vitek,
Libor Cervenka, Czech Technical Univ.
N. Ryan Walker, Adam B. Dempsey,
Michael J. Andrie, Rolf D. Reitz, University
Chairpersons:
Marcello Canova
138
TIME
O2-44
3:00
p.m.
3:20
p.m.
3:40
p.m.
O2-33
W2-67
W2-65
(PFL100)
of 2) (PFL501)
of 3) (PFL210)
vehicle levels.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:20 p.m.
Organizers:
Organizers:
GM Powertrain
Organizers:
Concepts NREC; Marcello Canova; Eric
Krivitzky, Concepts NREC
Organizers:
Long-Term Validation of Rapid Impedance
Spectrum Measurements as a Battery
State-of-Health Assessment Technique
Optimization of Gear Shifting and Torque
Split for Improved Fuel Efficiency and
Drivability of HEVs
Geometry-Based Compressor Data-Maps
Prediction
Spray Visualization and Characterization
of a Micro-Variable Circular-Orifice (MVCO)
Injector Coupled with a Swirl Adapter for
Diesel Reformer Applications
(2013-01-1524)
(2013-01-1461)
(2013-01-0933)
(2013-01-1588)
Jon P. Christophersen, Idaho National
Laboratory; John L. Morrison, Montana
Tech. of Univ. of Montana; Chester G.
Motloch, Motloch Consulting, Inc.; William H.
Morrison, Montana Tech. of Univ. of Montana
Mohammad Khodabakhshian, Lei Feng,
Jan Wikander, KTH Royal Institute of
Technology
Jamil El Hadef, Peter Janas, Renault
SAS; Guillaume Colin, University Of
Orleans; Vincent Talon, Renault SAS; Yann
Chamaillard, University of Orleans
Karthik Nithyanandan, MIng Huo, Univ of
Illinois at Urbana-Champaign; Chia-Fon Lee,
Univ of Illinois and Tsinghua Univ; Deyang
Hou, QuantLogic Corporation
Lead-Acid State of Charge Estimation for
Start-Stop Applications
Instantaneous Optimization-based Energy
Management Control Strategy for Extended
Range Electric Vehicle
Potentials of Variable Compressor Pre Swirl
Devices in Consideration of Different Sealing
Concepts
Evaluation of Some Important Boundary
Conditions for Spray Measurements in a
Constant Volume Combustion Chamber
(2013-01-1532)
(2013-01-1460)
(2013-01-0934)
(2013-01-1610)
Daniel Le, Brian Sisk, Johnson Controls
Power Solutions
Branimir Skugor, Josko Deur, Univ of
Zagreb
Stephan-Johannes Schnorpfeil, Stefan
Pischinger, VKA , RWTH Aachen; Philipp
Adomeit, FEV GmbH; Stephen Bowyer, FEV Inc.
Jonas Galle, Christophe Van De Maele,
Sander Defruyt, Sebastian Verhelst, Roel
Verschaeren, Ghent University
Chairpersons:
Marcello Canova
Li-Ion Battery SoC Estimation Using a
Bayesian Tracker
Numerical Study of DMF and Gasoline Spray
and Mixture Preparation in a GDI Engine
(2013-01-1530)
(2013-01-1592)
Ienkaran Arasaratnam, Ryan Ahmed,
McMaster University; Mohammed El-Sayed,
McMaster Univ; Jimi Tjong, Ford Motor Co;
Saeid Habibi, McMaster Univ
Haiying Li, Birmingham Univ.; Cao li,
Jaguar Land Rover; Xiao Ma, PoWen
TU, Birmingham Univ.; Hongming Xu,
Birmingham Univ,Tsinghua University;
Shi-Jin Shuai, Tsinghua University; Akbar
Ghafourian, Birmingham Univ.
4:00
p.m.
Spray Atomization Study on Multi-Hole
Nozzle for Direct Injection Gasoline Engines
(2013-01-1596)
Motoyuki Abe, Hitachi, Ltd.; Ehara
Hideharu, Soma Masahiro, Tohru Ishikawa,
Hitachi Automotive Systems, Ltd.
10:01
p.m.
Dynamic Programming-based Optimization
of Control Variables of an Extended Range
Electric Vehicle (Written Only -- No Oral
Presentation)
Experimental and Numerical Study of the
Effect of Pulsating Flow on the Turbocharger
Turbine Performance Parameters (Written
(2013-01-1481)
(2013-01-0938)
Mihael Cipek, Mirko Čorić, Branimir Škugor,
Josip Kasać, Joško Deur, Univ of Zagreb
Hamidreza Tabatabaei, Islamic Azad
University-Kashan Branch; Masoud
Boroomand, Amirkabir University of
Technology; Mohammad Taeibi-Rahni,
Sharif University of Technology
10:02
p.m.
The Fluid Induced Vibration Analysis on an
Integrated Exhaust Manifold (Written Only
(2013-01-0937)
BangLin Deng, Jingping Liu, Renhua Feng,
Hunan University; Daming Zhang, California
State University
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-64
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
W2-70
W2-61
O2-43
of 3) (PFL216)
- System Modeling, Hydraulic and Modeling (Part 4 of 4) (PFL209)
Mechanical Systems (PFL208)
This session focuses on hydrogen internal
combustion engines and highlights recent
engine research as well as vehicle related
activities. Combustion concepts including
hydrogen port fuel injection as well as
direct injection are investigated, advanced
diagnostics for hydrogen engines are
presented and recent results in hydrogen
engine simulation are shown.
are also encouraged
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:20 p.m.
Organizers:
University
Organizers:
Brad A. Boyer, Ford Motor Co.; Thomas
Wallner, Argonne National Laboratory
Organizers:
Diana-Lucinia Dascalescu, Gamma
Technologies Inc.; Federico Millo,
Schernus, FEV GmbH
Organizers:
Concept of “Temperature Swing Heat
Insulation” in Combustion Chamber
Walls, and Appropriate Thermo-Physical
Properties for Heat Insulation Coat
Evaluation of a Flow-Field-Based Heat
Transfer Model for Premixed Spark-Ignition
Engines on Hydrogen
Predicting Light-Duty Vehicle Fuel Economy
as a Function of Highway Speed
Gasoline Combustion Modeling of Direct
and Port-Fuel Injected Engines using a
Reduced Chemical Mechanism
(2013-01-0274)
(2013-01-0225)
(2013-01-1113)
(2013-01-1098)
Hidemasa Kosaka, Yoshifumi Wakisaka,
Yoshihiro Nomura, Yoshihiro Hotta, Makoto
Koike, Kiyomi Nakakita, Toyota Central
R&D Labs Inc.; Akio Kawaguchi, Toyota
Motor Corp
Joachim Demuynck, Ghent University; Kam
Chana, Oxford University; Michel De Paepe,
Sebastian Verhelst, Ghent University
John Thomas, Ho-Ling Hwang, Brian West,
Shean Huff, Oak Ridge National Laboratory
Shawn D. Givler, Mandhapati Raju, Eric
Pomraning, P. K. Senecal, Convergent
Science Inc.; Nameer Salman, Ronald
Reese, Chrysler Group LLC
Development and Vehicle Demonstration
of a Systems-Level Approach to Fuel
Economy Improvement Technologies
Direct In-cylinder Injection of Water into a PI
Hydrogen Engine
Analysis of the Performance of a
Turbocharged S.I. Engine under Transient
Operating Conditions by Means of Fast
Running Models
A Numerical Investigation on Scalability and
Grid Convergence of Internal Combustion
Engine Simulations
(2013-01-0280)
(2013-01-0227)
(2013-01-1115)
(2013-01-1095)
Keith A. Confer, John Kirwan, Delphi
Powertrain; Nayan Engineer, Hyundai-Kia
America Technical Center Inc
Matthew Younkins, University of Michigan/
Ford Motor Co.; Margaret Wooldridge,
University of Michigan; Brad Boyer, Ford
Motor Co.
Federico Millo, Giacomo Di Lorenzo,
Politecnico di Torino; Emanuele Servetto,
Andrea Capra, Powertech Engineering;
Massimo Pettiti, Fiat Group Automobiles
Sibendu Som, Douglas Longman, Shashi
Aithal, Raymond Bair, Marta García,
Argonne National Laboratory; Shaoping
Quan, K. J. Richards, P. K. Senecal,
Convergent Science Inc.; Tushar Shethaji,
Marcus Weber, Caterpillar Inc.
Increasing Efficiency in Gasoline Powertrains
with a Two-Stage Variable Compression
Ratio (VCR) System
Experimental Investigation of a Port Fuel
Injected Spark Ignition Engine Fuelled with
Variable Mixtures of Hydrogen and Methane
A Comprehensive Study on Different
System Level Engine Simulation Models
Investigation of the Parameters Influencing
the Spray-Wall Interaction in a GDI Engine Prerequisite for the Prediction of Particulate
Emissions by Numerical Simulation
(2013-01-0288)
(2013-01-0226)
(2013-01-1116)
(2013-01-1089)
Henning Kleeberg, Dean Tomazic, FEV
Inc.; Jürgen Dohmen, Karsten Wittek, FEV
GmbH; Andreas Balazs, RWTH Aachen
University
Michele Battistoni, Claudio Poggiani, Carlo
N. Grimaldi, Universita degli Studi di Perugia
Johann C. Wurzenberger, AVL LIST
GmbH; Roman Heinzle, RICAM,
MathConsult GmbH Linz; Maxime-Vianney
Deregnaucourt, Vienna University of
Technology; Tomaz Katrasnik, University
of Ljubljana
Fabian Köpple, Paul Jochmann, Andreas
Kufferath, Robert Bosch GmbH; Michael
Bargende, IVK, University of Stuttgart
Future Gasoline Engine Technology and the
Effect on Thermal Management and Real
World Fuel Consumption
A Comparative Study of a Spark Ignition
Engine Running on Hydrogen, Synthesis
Gas and Natural Gas
Traversing the V-Cycle with a Single
Simulation - Application to the Renault 1.5
dCi Passenger Car Diesel Engine
Combined In-cylinder / CHT Analyses for
the Accurate Estimation of the Thermal
Flow Field of a High Performance Engine for
Sport Car Applications
(2013-01-0271)
(2013-01-0229)
(2013-01-1120)
(2013-01-1088)
James Miller, James Taylor, Paul Freeland,
Marco Warth, Mahle Powertrain, Ltd.; Rene
Dingelstadt, Rolf Mueller, Mahle International
GmbH
Pedro Orbaiz, Michael J. Brear, Payman
Abbasi, Peter A. Dennis, University of
Melbourne
Imran Cosadia, John J. Silvestri, Iakovos
Papadimitriou, Gamma Technologies, Inc.;
Damien Maroteaux, Philippe Obernesser,
RENAULT SAS
Stefano Fontanesi, Giuseppe Cicalese, Univ
of Modena and Reggio Emilia; Alessandro
Tiberi, Ferrari SpA
Thermodynamic Systems for Tier 2 Bin 2
Diesel Engines
DelHy 3W - Hydrogen Fuelled Hy-Alfa Three
Wheeler
Investigations on the Tail-Pipe Emissions of
Commercial Engines with Advanced OneDimensional Simulation Methods
In-Cylinder Flow Analysis in a Two-Stroke
Engine - A Comparison of Different
Turbulence Models Using CFD
(2013-01-0282)
(2013-01-0224)
(2013-01-1117)
(2013-01-1085)
Arvind Suresh, David Langenderfer, Clay
Arnett, Michael Ruth, Cummins Inc.
Saravanan Natarajan, Mathew Abraham, M
Rajesh, GP Subash, Rana Kunal, Mahindra
& Mahindra Ltd; Lalit Das, Indian Institute of
Technology - Delhi
Friedrich Forsthuber, Thorsten Krenek,
Franz Marinitsch, Thomas Lauer, Vienna
University of Technology; Joachim Weiss,
Markus Raup, Thorolf Schatzberger, MAN
Truck & Bus AG
Addepalli S Krishna, Jawali Maharudrappa
Mallikarjuna, Indian Institute of Technology
Madras; Kumar Davinder, Y Ramachandra
Babu, TVS Motor Company Ltd.
140
TIME
W2-64
2:40
p.m.
3:00
p.m.
3:20
p.m.
W2-70
W2-61
O2-43
of 3) (PFL216)
- System Modeling, Hydraulic and Modeling (Part 4 of 4) (PFL209)
Mechanical Systems (PFL208)
This session focuses on hydrogen internal
combustion engines and highlights recent
engine research as well as vehicle related
activities. Combustion concepts including
hydrogen port fuel injection as well as
direct injection are investigated, advanced
diagnostics for hydrogen engines are
presented and recent results in hydrogen
engine simulation are shown.
are also encouraged
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:20 p.m.
Organizers:
University
Organizers:
Brad A. Boyer, Ford Motor Co.; Thomas
Wallner, Argonne National Laboratory
Organizers:
Diana-Lucinia Dascalescu, Gamma
Technologies Inc.; Federico Millo,
Schernus, FEV GmbH
Organizers:
Effects of Late Intake Valve Closing Timing
on Thermal Efficiency and Emissions Based
on a Two-stage Turbocharger Diesel Engine
An Efficient, One-Dimensional, Finite
Element Helical Spring Model for Use in
Planar Multi-Body Dynamics Simulation
A Multi-Distribution Functions Droplet
Evaporation Model using Continuous
Thermaldynamics
(2013-01-0276)
(2013-01-1118)
(Oral Only)
Binyang Wu, Hao Yu, Pak Pak, Yiqiang Pei,
Wanhua Su, Tianjin University
Marcin Marek Okarmus, Gamma
Technologies Inc.; Rifat Keribar, DianaLucinia Dascalescu, Gamma Technologies
Inc; Rob Zdrodowski, Ford Motor Co
Way Lee Cheng, Cai Shen, Univ of Illinois at
Urbana-Champaign; Chia-Fon Lee, Univ of
Illinois and Tsinghua Univ
Development and Economic Analysis of a
Two Stroke Compounded Engine Concept
- the BETE-Max
Using Non-Smooth Mechanics and
Parallelization Techniques for the Efficient
Simulation of Different Types of Valve
Springs
Numerical Investigation about Effects of
Ambient Temperature on Soot Formation
and Oxidation Mechanisms
(2013-01-0286)
(2013-01-1119)
(Oral Only)
John R. Bucknell
Jan Clauberg, Robert Huber, Technische
Universitaet Muenchen
Xiaojie Bi, Univ of Illinois at UrbanaChampaign; Chia-Fon Lee, Univ of Illinois
and Tsinghua Univ; Xinqi Qiao PhD,
Shanghai Jiao Tong Univ
Design and Operational Characteristics of a
Novel Floating-Stroke, Free Piston Internal
Combustion Reciprocating Engine
(2013-01-0284)
S. Scott Goldsborough, Marquette
University; John Fitzgerald, Energy
Transition Technology Inc
10:01
p.m.
Hydrogen DI Dual Zone Combustion
System (Written Only -- No Oral
Presentation)
(2013-01-0230)
Matthew Younkins, University of Michigan/
Ford Motor Co.; Brad Boyer, Ford Motor
Co.; Margaret Wooldridge, University of
Michigan
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
SUB-TP-00012, and also individually. To
TIME
W2-68
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
W2-69
W2-63
O2-35/36
(PFL500)
(Part 1 of 3) Engine Control &
Calibration (PFL300)
SI Combustion (Part 1 of 3) Basic
Combustion, Efficiency & Knock
(PFL201)
Transmission and Driveline: All
Wheel Drive (PFL602)
techniques.
This session covers powertrain control
system and optimization processes related
emissions, performance, reliability, and
quality demands. Topics include the
control, calibration, and diagnostics of
the engine, powertrain, and supporting
electromechanical subsystems related to
energy management in conventional and
hybrid operation.
This session focuses on combustion
technologies in both 4-stroke and 2-stroke
engines characterized by 1) ignition by
an external energy source that serves
to control combustion phasing, and 2) a
combustion rate that is limited by flame
propagation. The scope of topics includes
studies of mixture formation, ignition,
knock, engine efficiency, flame propagation,
alternative fuels and emissions formation.
Part 1 of 3: Basic Combustion, Efficiency,
and Knock
This session contains topics relevant to all
wheel drive systems.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 2:20 p.m.
1:00 p.m. - 1:40 p.m.
Organizers:
LLC
Organizers:
Feilong Liu, Delphi Corp.; Peter J. Maloney,
MathWorks Inc.; Denise M. Rizzo, US Army
TARDEC; Matti Vint, Ricardo Inc.
Organizers:
Terrence Alger, Southwest Research
Institute; Richard S. Davis, General Motors
LLC; Mark C. Sellnau, Delphi Corp.
Organizers:
Joel Gunderson, Farzad Samie, General
Motors LLC; Robert A. Smithson, FallBrook
Technologies Inc.
Chairpersons:
Feilong Liu, Delphi
Chairpersons:
Institute
Advanced Glow Plug for Heavy Fuels
Applications
Development of a New In-vehicle Sensing
Method to Instantaneously Measure the
Mixture Fraction of Bio-diesel Present in a
Crude Oil based Classic Diesel Fuel
Experiments and Modeling of Flame/Wall
Interaction in Spark-Ignition (SI) Engine
Conditions
AWD Disconnect Solutions “ZF ECOnnect”
(2013-01-1716)
(2013-01-1745)
(2013-01-1121)
(2013-01-0362)
Benjamin Baird, Shahrokh Etemad,
Precision Combustion, Inc.
Michael Pontoppidan, Numidis Sarl; Gino
Montanari, Magneti Marelli Brazil
Olivier Laget, IFP Energies nouvelles;
Laëtitia Muller, Turbomeca; Karine Truffin,
Julian Kashdan, Rajesh Kumar, IFP Energies
nouvelles; Julien Sotton, Bastien Boust,
Marc Bellenoue, ENSMA
Robert Peter, Claus Granzow, Matthias
Arzner, Volker Vogel, ZF Friedrichshafen AG
New Polymeric Coating on Sputtered
Bearings for Heavy Duty Diesel Engines
Real-Time Estimation of Intake O2
Concentration in Turbocharged CommonRail Diesel Engines
Investigations on the Potential of a Variable
Miller Cycle for SI Knock Control
Development of a Standard Spin Loss Test
Procedure for FWD-Based Power Transfer
Units
(2013-01-1724)
(2013-01-0343)
(2013-01-1122)
(2013-01-0361)
Mario S. Praca, Samantha Uehara, Matheus
Ferreira, MAHLE Metal Leve S.A.; Omar
Mian, MAHLE Engine Systems UK
Ivan Arsie, Andrea Cricchio, Cesare
Pianese, University of Salerno; Matteo De
Cesare, Magneti Marelli SpA Powertrain
Division
Wolfram Gottschalk, Ulf Lezius, Lucas
Mathusall, IAV GmbH
Michael P. Kirk, Chrysler Group LLC;
Thomas D’Anna, William Seldon, FEV Inc;
Andreas Perakes, Ford Motor Co; Craig
Ross, General Motors Company
High Durability and Low Fuel Consumption
Ring Pack for HDD Engines
Simplified Multiple Sliding Mode Transient
Control with VGT and EGR Diesel Engine
Increasing EGR Tolerance using High
Tumble in a Modern GTDI Engine for
Improved Low-Speed Performance
(2013-01-1725)
(2013-01-0345)
(2013-01-1123)
Eduardo Nocera, Rafael Antonio Bruno,
Davi Silva, MAHLE Metal Leve S.A.; Jason
Bieneman, MAHLE Industries, Incorporated
Hyomin Jin, Seibum Choi, Hojin Jung,
KAIST
Jennifer Wheeler, Dusan Polovina,
Subramanian Ramanathan, Kevin Roth,
Dennis Manning, Joshua Stein, AVL
Powertrain Engineering Inc
Characterization of EGR Cooler Response
for a Range of Engine Conditions
Reduction of Experimental Data Points in
the Base Calibration by
Estimation of Engine Maps Using
Regularized Basis Function Neural
Networks
(paper approved by SAE Brazil- 2012-360231)
Influences on Combustion Characteristics
and Performances of EGR vs. Lean Burn in
a Gasoline Engine
(2013-01-1717)
(Oral Only)
(2013-01-1125)
Yolanda Bravo, VALEO; Jose Lujan, Andres
Tiseira, Universidad Politecnica de Valencia
Eduardo Xavier, Base Calibration; Rodrigo
Westphal, Fiat Automoveis SA; Wanderson
Rodrigues, Fiat Automóveis SA
Qijun Tang, Jingping Liu, Hunan University;
Zhangsong Zhan, Tiegang Hu, ChangAn
Automotive Group
Analytical Comparison of a Turbocharged
Conventional Diesel and a Naturally
Aspirated Compact Compression Ignition
Engine both Sized for a Highway Truck
Flexible ECU Function Development
Calibration and Engine Performance
Assessment Based on Co-Simulation
(2013-01-1736)
(2013-01-0342)
John Clarke, Edward O’Malley, Motiv
Engines LLC
Charles-Francois Tumelaire, David Gurney,
Tony Cains, Nebojsa Milovanovic, Marco
Warth, Mahle Powertrain, Ltd.
Preliminary Design of a Two-Stroke Uniflow
Diesel Engine for Passenger Car
Engine Test Data Quality Requirements for
Model Based Calibration: A Testing and
Development Efficiency Opportunity
(2013-01-1719)
(2013-01-0351)
Olivier Laget, Cyprien Ternel, Julien Thiriot,
Sébastien Charmasson, IFP Energies
nouvelles; Pascal Tribotté, Renault; Fabrice
Vidal, PSA Peugeot Citroën
Tim Beattie, Jaguar Land Rover; Richard P.
Osborne, AVL UK, Ltd.; Wilhelm Graupner,
AVL List GMBH
142
TIME
W2-68
3:00
p.m.
W2-69
W2-63
O2-35/36
(PFL500)
(Part 1 of 3) Engine Control &
Calibration (PFL300)
SI Combustion (Part 1 of 3) Basic
Combustion, Efficiency & Knock
(PFL201)
Transmission and Driveline: All
Wheel Drive (PFL602)
techniques.
hybrid operation.
Part 1 of 3: Basic Combustion, Efficiency,
and Knock
This session contains topics relevant to all
wheel drive systems.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 2:20 p.m.
1:00 p.m. - 1:40 p.m.
Organizers:
LLC
Organizers:
Organizers:
Organizers:
Technologies Inc.
Chairpersons:
Feilong Liu, Delphi
Chairpersons:
Institute
Development of Diesel Engine using New
Fuel Injection System - Direct Monitoring of
Fuel Injection Pressure using Injector with
Built-in Sensor, and its Applications
Data Driven Estimation of Exhaust Manifold
Pressure by Use of In-cylinder Pressure
Information
(2013-01-1739)
(2013-01-1749)
Takeshi Miyaura, Atsushi Morikawa,
Yoshiyasu Ito, Toyota Motor Corp;
Koji Ishizuka, Toyomori Tsuiki, DENSO
Corporation
Stefano Bottelli; Harald Waschl; Sergio
Savaresi, Politecnico di Milano; Luigi del Re;
Simone Formentin, Politecnico di Milano
3:20
p.m.
Ion-Sense-Based Real-Time Combustion
Sensing for Closed Loop Engine Control
(2013-01-0354)
Gerard Malaczynski, Gregory Roth, Donald
Johnson, Delphi Automotive Systems, LLC
3:40
p.m.
Design and Benefits of Dynamic Skip Fire
Strategies for Cylinder Deactivated Engines
(2013-01-0359)
Mark Wilcutts, Joshua Switkes, Mark Shost,
Adya Tripathi, Tula Technology, Inc.
10:01
p.m.
Exhaust Manifold Pressure Estimation Diesel
Equipped with a VGT Turbocharger (Written
(2013-01-1752)
Felipe Castillo, GIPSA Lab - Renault SAS;
Emmanuel Witrant, Luc Dugard, UJF
Grenoble 1/CNRS, GIPSA Lab; Vincent
Talon, Renault SAS
10:02
p.m.
Model-Based Methodology for Air Charge
Estimation and Control in Turbocharged
Engines (Written Only -- No Oral
Presentation)
(2013-01-1754)
Kunihiko Suzuki, Hitachi, Ltd.; Seiji Asano,
Hitachi Automotive Systems, Ltd.
10:03
p.m.
Reducing Development Time by Using
Virtual Platform to Help Designing Fault
Detection Strategy for a Turbocharged
SI Engine (Written Only -- No Oral
Presentation)
(2013-01-0338)
Rasoul Salehi, Sharif University of
Technology; Amir Hossein Parivar; Gholam
Reza Vossoughi, Aria Alasty, Sharif
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
O2-35/36
Transmission and Driveline: IVT /
CVT (PFL603)
W2-69
Control, Calibration, and OBD
(PFLCHAT310)
This session contains topics relevant to
belt and traction drive continuously variable
transmissions (CVT).
2:00 p.m. - 3:40 p.m.
Organizers:
Technologies Inc.
4:00 p.m. - 5:00 p.m.
Moderators:
Stephen Majkowski, American Power
Group, Inc. APG
Panelists:
William J. Fedor, Delphi Powertrain
Zoran S. Filipi, Clemson University
Kody G. Klindt, IAV Automotive Engineering
Inc.
Guoming G. Zhu, Michigan State University
2:00
p.m.
Development of High-Efficiency New CVT
for Midsize Vehicle
(2013-01-0365)
Koichiro Inukai, Akihiro Shibahara, Takeshi
Uchino, Nishiyama Keiichi, Yasunori
Murakami, Moichio Kojima, Honda R&D
Co., Ltd.
2:20
p.m.
SAE 2013 Transmission
& Driveline Symposium
Delivering Fuel Efficiency,
Performance and Drivability
Thermal Analysis of Traction Contact Area
Using a Thin-film Temperature Sensor
(2013-01-0368)
Masashi Inoue, Yasuhiro Takeuchi, Muneo
Yorinaga, Nippon Soken Inc.; Toshinari
Sano, Mitsuaki Tomita, Toyota Motor
Corporation
2:40
p.m.
Study of the Prediction Method for
Maximum Traction Coefficient
(2013-01-0366)
Toshinari Sano, Mitsuaki Tomita, Toyota
Motor Corporation; Masashi Inoue, Yasuhiro
Takeuchi, Muneo Yorinaga, Nippon Soken
Inc
3:00
p.m.
October 16-17, 2013
Troy, Michigan
Detroit Marriott Troy
Technology Development to Improve Jatco
CVT8 Efficiency
(2013-01-0364)
Yohei Shimokawa, JATCO, Ltd.
3:20
p.m.
Development of Ratio Control System
for Toyota’s New Continuously Variable
Transmission
Exhibit. Sponsor. Attend.
(2013-01-0367)
Kunio Hattori, Shinya Toyoda, Daisuke
Inoue, Yuya Shimozato, Toyota Motor
Corporation
Lubricants Activity
Lubricants Activity
www.sae.org/events/ctf
P135166
The purpose of this session is to provide an open exchange of ideas. Remarks made by participants or
members of the audience cannot be quoted or attributed to the individual or their company unless express
permission has been granted by the individual and their company. Any record of remarks, discussion, or
photographs may not be used unless express permission has been granted by the individual and their company.
144
TIME
O2-33
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
W2-70
W2-66
W2-67
(PFL100)
Electronics (Part 1 of 2) (PFL104)
Fuel & Additive Effects on CI
Engine Performance (Part 1 of 2)
(PFL205)
of 3) (PFL210)
Power electronics and electric motors
are essential for improving vehicle
efficiency through drivetrain electrification.
Technologies that support high efficiency,
high power density, and low cost motors
and power modules are required for the
success of vehicle electrification.
This session presents work investigating
the effect of fuel composition on CI engine
performance in terms of combustion
efficiency, emissions and engine hardware
durability. Variations in fuel composition
include aromatic compounds, the blending
of oxygenated components and the use of
additives for cetane number improvement
and lubricity enhancement.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
GM Powertrain
Organizers:
University; Laura Marlino, Oak Ridge National
Laboratory; Constantine N. Raptis, Mark A.
Theobald, GM Powertrain; Serdar Yonak,
Organizers:
Scott Curran, Oak Ridge National
Laboratory; William F. Northrop, Univ. of
Minnesota; Paul Richards; Samveg Saxena;
Andrea Strzelec
Organizers:
The Modular Hybrid Transmission Kit from
ZF
Development of Transverse Flux Motor
with Improved Material and Manufacturing
Method
Indicated Mean Effective Pressure
Oscillations in IC-CI Engine with HydrogenRich-Gas Addition
Numerical Spray Modeling for Ultra Low
Cost (ULC) Gasoline Engine
(2013-01-1446)
(2013-01-1765)
(2013-01-1687)
(2013-01-1606)
Ralf Kubalczyk, ZF Friedrichshafen AG
Daijiro Takizawa, Tadanobu Takahashi,
Haruhiko Shimizu, Ryutaro Kato, Honda
R&D Co., Ltd.
Michal Geca, Miroslaw Wendeker, Rafal
Sochaczewski, Marcin Szlachetka, Lublin
Balamurugan Rathinam, Upendra Naithani,
RNTBCI; Laurent Delahaye, Frederic Ravet,
Frederic Justet, RENAULT SAS
DC Charging and Standards for Plug-in
Electric Vehicles
Development of Rare Earth-saving Magnet
Using Localized Diffusion Method
The Feasibility of Using Raw Liquids from
Fast Pyrolysis of Woody Biomass as
Fuels for Compression-Ignition Engines: A
Literature Review
Comparison of the Homogeneous
Relaxation Model and a Rayleigh Plesset
Cavitation Model in Predicting the Cavitating
Flow Through Various Injector Hole Shapes
(2013-01-1475)
(2013-01-1757)
(2013-01-1691)
(2013-01-1613)
Richard Scholer, Chrysler Group LLC
Takayuki Higashi, Takehiro Miyoshi, Ryutaro
Kato, Michihisa Kono, Masashi Inoue,
Toshiyuki Nagumo, Takahiro Fukui, Kojiro
Ohsaki, Honda R&D Co., Ltd.; Makoto
Iwasaki, TDK Corporation
Charles J. Mueller, Sandia National
Laboratories
Federico Brusiani, Sergio Negro, Gian
Marco Bianchi, University of Bologna;
Maryam Moulai, Kshitij Neroorkar, David
Schmidt, University of MassachusettsAmherst
The Development of a Range Extender
Electric Vehicle Demonstrator
Efficient Design Methodology of an AllElectric Vehicle Powertrain using MultiObjective Genetic Optimization Algorithm
The Use of Biodiesel on the Performance
and Emission Characteristics of Diesel
Engined Vehicles
Numerical Simulations of Turbulent Sprays
with a Multicomponent Evaporation Model
(2013-01-1469)
(2013-01-1758)
(2013-01-1698)
(2013-01-1603)
Michael Bassett, Jonathon Hall, Gordon
Kennedy, Tony Cains, John Powell, Marco
Warth, Mahle Powertrain Ltd.
Abdenour Abdelli, Fabrice Le Berr, Raouf
Benlamine, IFP Energies Novelles
Jorge Martins, Universidade do Minho;
Felipe Torres, Ednildo Torres, Helcio
Pimenta, UFBA; Vitor Ferreira
Shalabh Srivastava, Harold Schock, Farhad
Jaberi, Michigan State University
Development of Electric Vehicle System for
City Commuter Vehicle
Development and Testing of a Low Cost
High Performance Hybrid Vehicle Electric
Motor
Engine Performance Characteristics for
Biodiesels of Different Unsaturation Degrees
and Carbon Chain Lengths
Numerical Simulation of Diesel Spray
Combustion in a Constant Volume Chamber
by Eulerian and Lagrangian Conditional
Moment Closure Models
(2013-01-1447)
(2013-01-1760)
(2013-01-1680)
(2013-01-1600)
Takahito Nozawa, Sumikazu Shamoto,
Tomoya Katanoda, Toyota Motor
Corporation
Deepak Hari, Christian Brace, Christopher
Vagg, Sam Akehurst, University of Bath;
Lloyd Ash, Richard Strong, Ashwoods
Automotive
P.X. Pham, The University of Sydney; T.A.
Bodisco, S. Stevanovic, M.D. Rahman,
H. Wang, Z.D. Ristovski, R.J. Brown,
Queensland University of Technology; A.R.
Masri, The University of Sydney
Hyeonsu Cho, POSTECH; Woo Kim,
Kongju National University
Development of a New Powertrain for
Subcompact Electric Vehicles
Design and Characterization of an
E-booster Driven by an High Speed
Brushless DC Motor
The Impact upon Durability of Heavy-Duty
Diesel Engine using 5 Percentage Biodiesel
Cavitation Process Simulation for
Automotive Applications with an Isothermal
Solver Approach
(2013-01-1478)
(2013-01-1762)
(2013-01-1686)
(2013-01-1608)
Akira Kabasawa, Kenichiro Kimura, Takeshi
Taguchi, Akihiro Anekawa, Honda R&D
Co., Ltd.
Stephane Tavernier, Samuel Equoy, Moving
Magnet Technologies SA
Yong-Yuan Ku, Ko Wei Lin, Ya-Lun Chen,
Ching-Fu Liao, Automotive Research &
Testing Center
Gennady Dumnov, Alexander Muslaev,
Viatcheslav Streltsov, Mentor Graphics
(Russia); Boris Marovic, Mentor Graphics
(Deutschland)GmbH
Validation Test Result Analysis of Plug-in
Hybrid Vehicle
Development of Down-sized Motor Stator
Phenomenology of EGR in a Light Duty
Diesel Engine Fuelled with Hydrogenated
Vegetable Oil (HVO), Used Vegetable Oil
Methyl Ester (UVOME) and Their Blends
Effect of Physical Properties on Spray
Models
(2013-01-1464)
(2013-01-1763)
(2013-01-1688)
(2013-01-1601)
Kenji Itagaki, Hiroaki Takeuchi, Shizuo Abe,
Keita Hashimoto, Toyota Motor Corp.
Ryosuke Utaka, Hiroshi Kaneiwa, Atsushi
Umeda, DENSO Corp.; Tatsuhiko Mizutani,
Akira Takasaki, Toyota Motor Corp; Mitsuru
Kato, DENSO Corp.
Dai Liu, Akbar Ghafourian, Hongming Xu,
Univ. of Birmingham
Sarangarajan Vijayraghavan Iyengar,
Christopher Rutland, University of
Wisconsin Madison
Development of a new two-motor plug-in
hybrid System
Improving Traction Drive Performance with
DC Bus Voltage Adaptation and Machine
Winding Reconfiguration
Experimental Investigation on the Effects
on Performance and Emissions of an
Automotive Euro 5 Diesel Engine fuelled
with B30 from RME and HVO
Validating Non-Reacting Spray Cases with
KIVA-3V and OpenFoam
(2013-01-1476)
(Oral Only)
(2013-01-1679)
(2013-01-1595)
Naritomo Higuchi, Yoshihiro Sunaga,
Masashi Tanaka, Hiroo Shimada, Honda
R&D Co., Ltd.
Lei Hao, General Motors
Federico Millo, Fabio Mallamo, Theodoros
Vlachos, Politecnico di Torino; Claudio
Ciaravino, General Motors Company; Lucio
Postrioti, Giacomo Buitoni, Università di
Perugia
Sarangarajan Vijayraghavan Iyengar, ChiWei Tsang, Christopher Rutland, Univ of
Wisconsin Madison
TIME
O2-33
W2-70
W2-66
(PFL100)
(PFL205)
of 3) (PFL210)
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 10:20 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 a.m.
Organizers:
GM Powertrain
Organizers:
University; Laura Marlino, Oak Ridge National
Laboratory; Constantine N. Raptis, Mark A.
Theobald, GM Powertrain; Serdar Yonak,
Organizers:
Andrea Strzelec
Organizers:
Formation and Removal of Injector Nozzle
Deposits in Modern Diesel Cars
Modeling Evaporating Diesel Sprays Using
an Improved Gas Particle Model
(2013-01-1684)
(2013-01-1598)
Rod Williams, Alastair Smith, Ian Buttery,
Shell Global Solutions (UK)
Sujith Sukumaran, Song-Charng Kong,
Iowa State University; Nam Hyo Cho, John
Deere Power Systems
Injector Fouling Performance and Solubility
of GTL Diesel Dosed with Zinc
Simulations of Diesel Sprays Using the
Conditional Moment Closure Model
(2013-01-1697)
(2013-01-1618)
Adrian James Velaers, Stefan de Goede,
Christopher Woolard, Sasol Fuels
Technology; Ross Burnham, University of
Cape Town
Michele Bolla, Thordur Gudmundsson,
Yuri M. Wright, Konstantinos Boulouchos,
ETH Zurich
Potential of Hydrogenated Vegetable Oil
(HVO) in Future High Efficiency Combustion
System
Modeling of Narrow-Angle Sprays Using a
Spray Model Based on the Moments of the
Droplet Size Distribution
(2013-01-1677)
(2013-01-1593)
Om Parkash Bhardwaj, Andreas F. Kolbeck,
Thomas Kkoerfer, FEV GmbH; Markku
Honkanen, Neste Oil Oyj
Nwabueze G. Emekwuru, Univ. of
Wolverhampton
Combustion and Emissions Characteristics
of JP8 Blends and ULSD#2 with Similar
CN in a Direct Injection Naturally Aspirated
Compression Engine
Hole Cross Section Shape Influence on
Diesel Nozzle Flow
(2013-01-1682)
(2013-01-1609)
Valentin Soloiu, Henry Ochieng, Jabeous
Weaver, Marvin Duggan, Spencer Harp,
Brian Vlcek, Craig Jenkins, Georgia
Southern University; Marcis Jansons,
Wayne State University
Giancarlo Chiatti, Fulvio Palmieri, Università
degli Studi “Roma Tre”
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
146
W2-67
TIME
W2-64
W2-65
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
W2-61
Thermal & Fluid Sciences - Incylinder Heat Transfer, Cooling
and Exhaust Systems (Part 1 of 2)
Engine Heat Transfer (PFL214)
Combustion (Including HCCI)
(Part 2 of 3) Powertrain Systems
Control (PFL300)
This session focuses on fundamental
numerical (1D and 3D CFD) and
experimental research in the areas of
heat and mass transfer and fluid flow that
impacts engine and vehicle performance
and design. Subject areas include
convection, conduction, radiation, porous
media, phase change including boiling,
condensation, melting and freezing.
Application areas include, combustion,
emissions, cooling, lubrication, exhaust,
intake, fuel delivery, external air flow, under
hood and under body.
This session focuses on kinetically
controlled combustion (including, HCCI,
PCCI, CAI, RCCI, etc.).
hybrid operation.
This session sets out to reflect the recent
advances on the research, development
and practices of Powertrain NVH treatment.
The technical papers are of interest to
powertrain system designers, testing
specialists, NVH experts, and other
individuals who evaluate and develop
technologies to control powertrain NVH.
The coverage includes: engine, engine
subsystem and components noise and
vibration; powertrain systems noise
measurement and instrumentation;
powertrain systems noise analysis.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 12:00 p.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
University; Thomas Edward Briggs,
Southwest Research Institute; Raj
Ranganathan, Showatech Inc.; Martin
Tuner, Lund Univ.
Organizers:
Christopher Gehrke, Caterpillar Inc.;
Scott Goldsborough, Argonne National
Laboratory; Nebojsa Milovanovic, Mahle
Powertrain, Ltd.; Samveg Saxena;
Hongming Xu, Birmingham Univ.
Organizers:
Organizers:
Mikhail A. Ejakov, Ford Motor Co.; Gang
Sheng, Marshall University
Exhaust Phases in a DI Diesel Engine Based
on Instantaneous Cyclic Heat Transfer
Experimental Data
Direct In-cylinder CO2 Measurements
of Residual Gas in a GDI Engine for
Model Validation and HCCI Combustion
Development
Development of a Motor Torque Distribution
Strategy of Six-wheel-Driven Electric
Vehicles for Optimized Energy Consumption
(2013-01-1646)
(2013-01-1654)
(2013-01-1746)
(2013-01-1708)
Georgios Mavropoulos, Dimitrios Hountalas,
National Technical University of Athens
Yan Zhang, Hua Zhao, Brunel University;
Mark Peckham, Bruce Campbell,
Cambustion Ltd.
Seungjae Yun, Kyongsu Yi, Seoul National
Univ; Seyoung Cheon, Yeogiel Yoon,
Samsung Techwin
Masanori Takahashi, Ryoji Isarai, Nippon
Soken, Inc.; Hiroki Hara, Toyota Motor
Corp.
Experimental Investigation of Piston Heat
Transfer During Conventional Diesel and
Combustion Regimes
Steady-State Combustion Development
of a Downsized Multi-Cylinder Engine with
Range Extended HCCI/SACI Capability
Optimal Design Strategies for Different
Hybrid Powertrain Configurations Assessed
with European Drive Cycles
A Study of Wet/Drying-up Friction and
Noise of Accessory Belt
(Oral Only)
(2013-01-1655)
(2013-01-1751)
(2013-01-1701)
Terry Hendricks, Sandia National
Laboratories; Jaal Ghandhi, Univ of
Wisconsin Madison
Dusan Polovina, David McKenna, Jennifer
Wheeler, AVL Powertrain Engineering Inc;
Jeff Sterniak, Oliver Miersch-Wiemers, Alan
Mond, Hakan Yilmaz, Robert Bosch LLC
Thomas Juergen Boehme, Bernd Becker,
Michael Ruben-Weck, Matthias Rothschuh,
Alexander Boldt, Christoph Rollinger,
Robert Butz, Heiko Rabba, IAV Automotive
Engineering; Wolfgang Drewelow, University
of Rostock
Gang Sheng, Marshall University
Thermal Management of Vehicular Payloads
Using Nanofluid Augmented Coolant Rail Modeling and Analysis
Evaluation of Emissions and Performances
from Partially Premixed Compression
Ignition Combustion using Gasoline and
Spark Assistance
Impacts of Two-Speed Gearbox on Electric
Vehicle’s Fuel Economy and Performance
New Vibration Control Methodology
in Engine Mount System for Low-Fuel
Consumption Engines
(2013-01-1641)
(2013-01-1664)
(2013-01-0349)
(2013-01-1703)
Fan He; David Ewing; Joshua Finn; John
Wagner; Lin Ma
Jose M Desantes, Raul Payri, Antonio
Garcia, Javier Monsalve Serrano, Universitat
Politecnica de Valencia
Guang Wu, Xing Zhang, Zuomin Dong,
University of Victoria
Yusuke Sato, Masahiko Kondo, Nissan
Study of Motor Oil Cooling at Low Reynolds
Number in Multi-Port Narrow Channels
Chemical Kinetics Study on Two-Stage
Main Heat Release in Ignition Process of
Highly Diluted Mixtures
PHEV Cold Start Emissions Management
Powertrain Mount Layout Design for
Decoupling Rigid Body Modes in the Vehicle
Concept Design Stage
(2013-01-1643)
(2013-01-1657)
Chairpersons:
Raj Ranganathan, Showatech Inc.; Martin
Tuner, Lund Univ.
8:00
a.m.
W2-69
Chairpersons:
Matti Vint, Ricardo Inc.
Measurement of Piston Secondary Motion
Using the New Digital Telemeter
(2013-01-0358)
(2013-01-1706)
Mohammed S. Saadi, Mohammed Ismail,
Kazunari Kuwahara, Takuya Tada, Osaka
Shahram Fotowat, Md Abdul Quaiyum, Amir Institute of Technology; Masahiro Furutani,
Fartaj, Univ of Windsor
Nagoya Institute of Technology; Yasuyuki
Sakai, Hiromitsu Ando, University of Fukui
Paul Chambon, Oak Ridge National
Laboratory; Dean Deter, David Irick, Univ
of Tennessee; David Smith, Oak Ridge
National Laboratory
Hunor Etele Erdelyi, Dirk Roesems,
Alessandro Toso, Stijn Donders, LMS
International
Design and Simulations of an Enhanced
and Cost Effective Engine Split Cooling
Concept
2-Stroke CAI Operation on a Poppet Valve
DI Engine Fuelled with Gasoline and its
Blends with Ethanol
Vehicle System Control for Start-Stop
Powertrains with Automatic Transmissions
Research and Improvement of SteeringWheel’s Idle Shaking
(2013-01-1640)
(2013-01-1674)
(2013-01-0347)
(2013-01-1711)
Azmi Osman, Aizad Sazrul Sabrudin, Mohd
Asmu’i Hussin, Zul Ashraf Bakri, PROTON
Malaysia
Yan Zhang, Hua Zhao, Mohammed Ojapah,
Alasdair Cairns, Brunel University
Xiaoyong Wang, Ryan McGee, Ming Kuang,
Ford Motor Co.
Shichao Wang, Wenku Shi, Guangming Wu,
Shida Nie, Jilin University
Flow and Pressure Drop Characteristics for
Various Non-Circular Curved Ducts Used
in Automobile HVAC System with Different
Bend Angles
Influence of the Combination of Fuel
Properties for a DI-Diesel Engine under
Partly Homogeneous Combustion
Real-Time Optimal Energy Management of
Heavy Duty Hybrid Electric Vehicles
Objective Evaluation of Interior Sound
Quality in Passenger Cars Using Artificial
Neural Networks
(2013-01-1645)
(2013-01-1685)
(2013-01-1748)
(2013-01-1704)
Ashok Kumar M, Kannan Kanniah, General
Motors Technical Center India
Yousef Jeihouni, Ludger Ruhkamp,
FEV GmbH, Aachen, Germany; Stefan
Pischinger, VKA , RWTH Aachen University
Dezong Zhao, Richard Stobart,
Shuming Chen, Dengfeng Wang, Yinchong
Wu, Jilin University; Zongwei Liu, Hailin
Wang, Geely Automobile Institute Ltd
TIME
W2-64
W2-65
W2-61
Control (PFL300)
hybrid operation.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 12:00 p.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Tuner, Lund Univ.
Organizers:
Organizers:
Organizers:
Wall Temperature Effect on SI-CAI Hybrid
Combustion Progress in a Gasoline Engine
Solutions of Hybrid Energy-Optimal Control
for Model-based Calibrations of HEV
Powertrains
Vibration Analysis for GDI Components
using Partial Coherence Function
(2013-01-1662)
(2013-01-1747)
(2013-01-1702)
Xinyan Wang, Hui Xie, Le Li, Liyan Xie,
Tao Chen, Tianjin Univ; Hua Zhao, Brunel
University
Thomas Juergen Boehme, Benjamin Frank,
Matthias Schultalbers, IAV Automotive
Engineering; Markus Schori, Bernhard
Lampe, University of Rostock
KiChul Shin, SangJik Lee, Dong-Ryul Lee,
Junseok Yoon, Sungbok Jun, Kefico Corp.
Characterization of Engine Control Authority
on HCCI Combustion as the High Load
Limit is Approached
An Intelligent Alternator Control Mechanism
for Energy Recuperation and Fuel Efficiency
Improvement
Engine Fault Detection Using Wavelet
Packet Transforms
(2013-01-1665)
(2013-01-1750)
(2013-01-1705)
James P. Szybist, K. Dean Edwards, Oak
Ridge National Laboratory; Matthew Foster,
Delphi Powertrain; Keith Confer, Delphi
Corp; Wayne Moore, Delphi Energy &
Engine Mgmt Systems
Venkatnarayanan Lakshminarasimhan,
Tata Motors Ltd.; Gopal Athani, Tata
Technologies Ltd.
Mohamed F. Aly, American University in
Cairo
Understanding Knock Metric for Controlled
Auto-Ignition Engines
Electric Low Pressure Fuel Pump Control
for Fuel Saving
(2013-01-1658)
(2013-01-0339)
Amir Maria, Wai K. Cheng, Kenneth Kar,
MIT; William Cannella, Chevron
Matteo De Cesare, Marco Parotto, Federico
Covassin, Stefano Sgatti, Magneti Marelli
SpA Powertrain Division
Development of Dynamic Models for an
HCCI Engine with Fully Variable Valve-Train
Multidimensional Measure of Perceived Shift
Quality Metric for Automatic Transmission
Applying Kansei Engineering Methods
Chairpersons:
Tuner, Lund Univ.
10:00
a.m.
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
(2013-01-0336)
Yudai Yamasaki, University of Tokyo; Franz
Xaver Schauer, Georg Wachtmeister,
Technische Universität München
Byeong wook Jeon, Hyundai Motor
Company; Sang-Hwan Kim, Heather
Harrelson, University of Michigan - Dearborn
Disturbance Observation and Rejection
Method for Gasoline HCCI Combustion
Control
Kang Song; Hui Xie; Le Li; Jun Lu; Cheng
Li; Zhiqiang Gao
11:40
a.m.
Two-Input Two-Output Control of Blended
Fuel HCCI Engines
(2013-01-1663)
Mehran Bidarvatan, Mahdi Shahbakhti,
Michigan Technological Univ.
Chairpersons:
(2013-01-1656)
(2013-01-1660)
148
W2-69
TIME
W2-64
W2-65
W2-61
Control (PFL300)
hybrid operation.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 12:00 p.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 10:40 a.m.
Organizers:
Tuner, Lund Univ.
Organizers:
Organizers:
Organizers:
Experimental Investigation of Close Loop
Control of HCCI Engine Using Dual Fuel
Approach
A New Control Strategy of Wet Dual
Clutch Transmission (DCT) Clutch and
Synchronizer for Seamless Gear Preselect
(Written Only - No Oral Presentation)
Chairpersons:
Tuner, Lund Univ.
12:00
p.m.
10:01
p.m.
W2-69
Chairpersons:
(2013-01-1675)
(2013-01-0340)
Rakesh Kumar Maurya, I I T Kanpur;
Avinash Kumar Agarwal, I I T Kanpur
Mohammad Adhitya, Rashad Mustafa,
Artur Plötner, Ferit Küçükay, IAE, TU
Braunschweig
Numerical Simulation of Subcooled
Nucleate Boiling in Cooling Jacket
of IC Engine (Written Only -- No Oral
Presentation)
Development of a Model-Based HCCI
Control Strategy for an Engine with a
Fully Variable Valve Train
Slip and Lock up Control of Torque
Converter clutch at Launching Conditions
and Its Temperature (Written Only -- No Oral
Presentation)
Refinement of Powertrain Transmitted
Vibration by Optimizing the Geometrical
Parameters of Vehicle Body Structure
(2013-01-1651)
(2013-01-1667)
(2013-01-0357)
(2013-01-1715)
Hemant Punekar, Saurish Das, Ansys Inc,
Franz Xaver Schauer, Thomas Zimmer,
Matthias Bachhuber, Michael Scheller,
TU München; Yudai Yamasaki, University
of Tokyo; Kazuhiro Oryoji, Hitachi Europe
GmbH; Georg Wachtmeister, TU München
Zhenjie Liu, Yulong Lei, Hongpeng Zheng,
Yao Fu, State Key Lab. of ASC, Jilin
University; Xin Jiang, China FAW Group
Corporation R&D Center
Arash Keshavarz, Mohsen Bayani
Khaknejad, Sajjad Beigmoradi, Kambiz
Jahani, CAE Engineer, R&D Center of SAIPA
Model-Based Design of a Plug-In Hybrid
Electric Vehicle Control Strategy (Written
Optimisation of an Air Intake System
to Reduce Multiple Whoosh Noises
from an Engine (Written Only -- No Oral
Presentation)
10:02
p.m.
10:03
p.m.
(2013-01-1753)
(2013-01-1714)
Jonathan King, Douglas Nelson, Virginia
Tech
Vivek Kolhe, K. Veeramani, Pawan Thakur,
Tata Techologies Ltd; Ashish Tiwari, Manoj
P N, Tata Motors Ltd
An Application of Ant Colony Optimization
to Energy Efficient Routing for Electric
Vehicles
(2013-01-0337)
Rami Abousleiman, Chrysler Group LLC;
Osamah Rawashdeh, Oakland University
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
The purpose of this session is to provide an open exchange of ideas. Remarks made by participants or members
of the audience cannot be quoted or attributed to the individual or their company unless express permission has
been granted by the individual and their company. Any record of remarks, discussion, or photographs may not
be used unless express permission has been granted by the individual and their company.
TIME
W2-63
O3-45
W2-68
SI Combustion (Part 2 of 3)
Alternative Fuels (PFL201)
Transmission Systems/Drive Unit
(PFL600)
(PFL500)
Part 2 of 3: Alternative Fuels
This session deals with papers on
automotive transmissions of different types,
their enhancements and controls.
vehicle levels.
techniques.
8:00 a.m. - 11:20 a.m.
8:20 a.m. - 11:20 a.m.
8:40 a.m. - 11:40 a.m.
9:00 a.m. - 11:00 a.m.
Organizers:
Organizers:
Berthold Martin, Chrysler Group LLC;
Tejinder Singh, General Motors LLC
Organizers:
Organizers:
LLC
Chairpersons:
Mark Sellnau, Delphi Corp; Richard Davis,
General Motors LLC
8:00
a.m.
O2-44
Fuel Property Effects on Particulates In
Spark Ignition Engines
(2013-01-1124)
Carl Vuk, Renaissance Engineering and
Consulting; Steven J. Vander Griend, ICM
Inc.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
10:00
a.m.
Combustion Characteristics and Emissions
of Low2-Methylfuran/Gasoline Blend in a
DISI Engine
FEV-7-XDCT: A Compact and Cost-Efficient
DCT for Small and Mid-SIze Vehicles
(2013-01-1317)
(2013-01-1271)
Chongming Wang, Hongming Xu, Thomas
Lattimore, University of Birmingham
Kiran Govindswamy, FEV Inc.; Gereon
Hellenbroich, FEV GmbH; Johannes
Ruschhaupt, VKA, RWTH Aachen University
Emission Characteristics of Gasoline and
LPG in a Spray-guided-type Direct Injection
Engine
Development of New Dual-Clutch
Transmission Systems
Catastrophic Failures in Lithium-Ion Battery
Packs Used in EV and Hybrid Vehicles
(2013-01-1323)
(Oral Only)
(Oral Only)
Cheolwoong Park, Yunseo Park,
Seungmook Oh, Yonggyu Lee, Tae Young
Kim, Hongsuk Kim, Young Choi, KernYong Kang, Korea Institute of Machinery &
Materials
Bernd Vahlensieck, Detlef Baasch, Markus
Hoher, ZF Friedrichshafen AG
Vijay Somandepalli, Exponent Inc; Kevin
Marr, Exponent Inc; Quinn Horn, Exponent
Inc
In-Cylinder Spectroscopic Measurements of
Combustion Process in a SI Engine Fuelled
with Butanol-Gasoline Blend
Online Driveline Fatigue Data Acquisition
Method
Characterizing Thermal Runaway of Lithiumion Cells in a Battery System Using Finite
Element Analysis Approach
Diesel/Gasoline Dual Fuel Powered
Combustion System based on Diesel CI
Triggered Ignition Control
(2013-01-1318)
(2013-01-1270)
(2013-01-1534)
(2013-01-1718)
Cinzia Tornatore, Simona Merola, Gerardo
Valentino, Luca Marchitto, Istituto Motori
CNR
Hussein Dourra, Chrysler Group LLC
Engineering Inc.
Dae Choi, Hyunsung Jung, Yohan Chi,
Hyundai Motor Company; Shinhyuk Joo,
Performance and Emissions of an SI Engine
using Methanol-Water Blends
The Design, Development and
Industrialization of an New 8 Speed
Automatic Transmission in China
Investigation of the Impact Phenomenon
During Minor Collision
Reducing Part Load Pumping Loss and
Improving Thermal Efficiency through High
Compression Ratio Over-Expanded Cycle
(2013-01-1319)
(2013-01-1277)
(2013-01-1545)
(2013-01-1744)
Louis Sileghem, Thomas Huylebroeck,
Arvid Van den Bulcke, Jeroen Vancoillie,
Sebastian Verhelst, Ghent University
Jan Gang Lu, SAIC Shengrui Transmission
Masashi Takahashi, Masaru Takabayashi,
Hiroyuki Mitsuishi, Japan Automobile
Research Institute
Yu Wan, Aimin Du, Tongji University
Characterization of Ethanol Blends
Combustion Processes and Soot Formation
in a GDI Engine
The World’s First Transverse 8-Speed
Automatic Transmission
Application of Insulation Standards to High
Voltage Automotive Applications
Valve Lift Profile Development and
Optimization Using Matlab
(2013-01-1316)
(2013-01-1274)
(2013-01-1528)
(2013-01-1722)
Francesco Catapano, Silvana Di Iorio,
Maurizio Lazzaro, Paolo Sementa, Bianca
Maria Vaglieco, Istituto Motori CNR
Toshihiko Aoki, Hiroshi Kato, Aisin AW Co
Ltd; Naoki Kato, Morise Masaru, Toyota
Motor Corp.
Robert Foley, Rajesh Nagappala, Galen
Ressler, General Motors Company; Peter
Andres, General Motors Company, Opel
Div; Brian Martel, General Motors Company
Iain Cameron, Bruce Minaker, Univ of
Windsor
Fuel Economy and CO2 Emissions of
Ethanol-Gasoline Blends in a Turbocharged
DI Engine
The ZF-Automatic Transmission 9HP48
Transmission System, Design and
Mechanical Parts
Requirements for Testing Lithium Batteries
for Transportation
CO2 Reduction Potential through Improved
Mechanical Efficiency of the Internal
Combustion Engine: Technology Survey and
Cost-Benefit Analysis
(2013-01-1321)
(2013-01-1276)
(Oral Only)
(2013-01-1740)
Hosuk H. Jung, Thomas G. Leone, Michael
H. Shelby, James E. Anderson, Travis
Collings, Ford Motor Company
Lutz Gaertner, Michael Ebenhoch, ZF
Friedrichshafen AG
Richard Byczek, Intertek
Michael Howlett, Bernhard Enzi, Georg von
Falck, Wolfgang Schoeffmann, Reinhold
Haslinger, Mario Brunner, AVL LIST GmbH
150
TIME
W2-63
O3-45
10:40
a.m.
11:00
a.m.
W2-68
Alternative Fuels (PFL201)
Transmission Systems/Drive Unit
(PFL600)
(PFL500)
Part 2 of 3: Alternative Fuels
This session deals with papers on
automotive transmissions of different types,
their enhancements and controls.
vehicle levels.
techniques.
8:00 a.m. - 11:20 a.m.
8:20 a.m. - 11:20 a.m.
8:40 a.m. - 11:40 a.m.
9:00 a.m. - 11:00 a.m.
Organizers:
Organizers:
Berthold Martin, Chrysler Group LLC;
Tejinder Singh, General Motors LLC
Organizers:
Organizers:
LLC
Investigation to Leveraging Effect of Ethanol
Direct Injection (EDI) in a Gasoline Port
Injection (GPI) Engine
Optimization Potential For A State Of The
Art 8 Speed AT
Accelerated Life Test Methodology for Li-Ion
Batteries in Automotive Applications
Design and Modeling of a Novel Internal
Combustion Engine with Direct Hydraulic
Power Take-off
(2013-01-1322)
(2013-01-1272)
(2013-01-1548)
(2013-01-1733)
Yuan Zhuang, Guang Hong, University of
Technology, Sydney
Albert Dick, ZF Friedrichshafen AG; Juergen
Greiner, ZF Getriebe GmbH; Anton Locher,
Friedemann Jauch, ZF Friedrichshafen AG
Karl William Steffke, Sudhakar Inguva,
Daniel Van Cleve, James Knockeart,
Kevin Zaseck, University of Michigan;
Aristotelis Babajimopoulos, Stony
Brook University; Matthew Brusstar, US
Environmental Protection Agency; Zoran
Filipi, Clemson University; Dennis Assanis,
Stony Brook University
Effect of Ethanol on Part Load Thermal
Efficiency and CO2 Emissions of SI Engines
Technologies for Future Generation ATs
Battery Life Prognostic Framework and
Application to Lithium-Ion Graphite/IronPhosphate Chemistry
The Free Piston Linear Generator Development of an Innovative, Compact,
Highly Efficient Range-Extender Module
(2013-01-1634)
(Oral Only)
(Oral Only)
(2013-01-1727)
Hosuk H. Jung, Michael H. Shelby,
Ford Motor Co.; Charles E. Newman,
Belcan Corporation; Robert A. Stein, AVL
Powertrain Engineering Inc
Martin Grumbach, ZF Friedrichshafen AG
Kandler Smith, Eric Wood, Ahmad Pesaran,
Florian Kock, DLR Institute of Vehicle
Concepts; Johannes Haag, DLR Institute of
Combustion Technology; Horst E. Friedrich,
DLR Institute of Vehicle Concepts
An Overview of the Effects of EthanolGasoline Blends on SI Engine Performance,
Fuel Efficiency, and Emissions
Automatic Transmission Systems beyond
2020 - Challenges and Competition
Predicting Battery Pack Performance vs.
Age Using Cell Data
(2013-01-1635)
(2013-01-1273)
(Oral Only)
Chairpersons:
Mark Sellnau, Delphi Corp; Richard Davis,
General Motors LLC
10:20
a.m.
O2-44
Robert A. Stein, AVL Powertrain Engineering Juergen Greiner, Martin Grumbach, ZF
Inc.; James E. Anderson, Timothy J.
Friedrichshafen AG
Wallington, Ford Motor Company
11:20
a.m.
Adam Timmons, Chrysler Group LLC
Pulse Power Testing of Batteries and
Supercapacitors for Hybrid Electric Vehicle
Applications: A Comparison of Constant
Current, Constant Power, and Ramped
Power Transients
(2013-01-1535)
Dennis A. Corrigan, Xiao Liu, Wayne State
University
10:01
p.m.
Effect of Flywheel Mass and Its Center of
Gravity on Crankshaft Endurance Limit
Safety Factor and Dynamics (Written Only
(2013-01-1743)
Nil Kanth Singh, Sanjay S. Patil, Tata
Motors, Ltd.
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
O2-44
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
O2-33
W2-68
W2-70
(PFL100)
Cold Start and Transients
(PFL211)
This session focuses on both SI and CI
combustion and mixture preparation
during cold start and transient engine
operation. Example topics include engine
performance, emissions, control strategies
and calibrations for cold start and transient
operation impact on NOx, PM, HC, CO,
and CO2 emissions; also including the
impact of variable valve timing, spark, and
turbocharger controls.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Organizers:
GM Powertrain
Organizers:
Eric W. Curtis, Ford Motor Co.; Ouafae
El Ganaoui-Mourlan, IFP School; Peter
Moilanen, Ford Motor Co.; Hamidb Servati,
ServoTech. Engineering
Organizers:
University; Laura Marlino, Oak Ridge
National Laboratory; Constantine N. Raptis,
Mark A. Theobald, GM Powertrain; Serdar
Yonak, Infineon Technologies North America
Corp.
Vision of Electric Automotive Machines The Future is Here
A Comparative Study of Hydraulic Hybrid
Systems for Class 6 Trucks
Insights into Cold-Start DISI Combustion in
an Optical Engine Operating at -7°C
High Efficiency Isolated AC-DC Converter
with Gradationally Controlled Voltage
Inverter for On-Board Charger
(2013-01-1527)
(2013-01-1472)
(2013-01-1309)
(2013-01-1756)
Nahum Goldenberg, Nahum Goldenberg,
Ltd.
Namwook Kim, Aymeric Rousseau,
Petros Efthymiou, Martin H. Davy, Colin
P. Garner, Graham K. Hargrave, John E.T.
Rimmer, Loughborough University; Dave
Richardson, Jaguar Land Rover
Takashi Kaneyama, Kazutoshi Awane,
Mamoru Takikita, Naohisa Uehara, Ryota
Kondo, Masaki Yamada, Mitsubishi Electric
Corp.
Newly Developed Lithium-Ion Battery Pack
Technology for a Mass-Market Electric
Vehicle
Assessing the Battery Cost at which Plugin Hybrid Medium-Duty Parcel Delivery
Vehicles Become Cost-Effective
An Investigation into Cold Start Emissions
from Compression Ignition Engines using
EU Legislative Emissions Test Procedures
Development of a Smart Main Relay
Assembly using IGBTs for xEV Battery
System
(2013-01-1543)
(2013-01-1450)
(2013-01-1304)
(2013-01-1764)
Yukiko Kinoshita, Toshiro Hirai, Yasuharu
Watanabe, Yasuo Yamazaki, Ryuichi
Amagai, Keisuke Sato, Nissan Motor Co.,
Ltd.
Laurie A. Ramroth, Jeffrey D. Gonder, Aaron
D. Brooker, National Renewable Energy
Laboratory
Piotr Bielaczyc, Joseph Woodburn, Andrzej
Szczotka, Bosmal Automotive R&D Institute
Ltd
Taeyeon Lee, Byungsub Jung, HK Semitech
Co., LTD.; Sang-Ryong Lee, Ho-Kyung
Kim, Sa-Heun Wie, Dae-Hwan Kwon, MinChul Joo, Yura Corporation
The Electric Drive Advanced Battery (EDAB)
Project: Development and Utilization of an
On-Road Energy Storage System Testbed
Study on the Application of the Waste Heat
Recovery System to Heavy-Duty Series
Hybrid Electric Vehicles
Diesel Cold-Start Emission Control
Research for 2015-2025 LEV III Emissions
Development of an Integrated Electrified
Powertrain for a Newly Developed Electric
Vehicle
(2013-01-1533)
(2013-01-1455)
(2013-01-1301)
(2013-01-1759)
Jeffrey Wishart, ECOtality North America;
Richard Barney Carlson, Idaho National
Laboratory; Paul Chambon, Oak Ridge
National Laboratory; Tyler Gray, ECOtality
North America
Daebong Jung, Seoul National Univ.;
SungJin Park, Hongik Univ.; Kyoungdoug
Min, Seoul National Univ.
Gary D. Neely, Jayant V. Sarlashkar, Darius
Mehta, Southwest Research Institute
Hirofumi Shimizu, Takahito Okubo, Izuho
Hirano, Shigeaki Ishikawa, Makoto Abe,
Nissan
Battery Development for Stop-Start
Application in Brazilian Market
System Design and Control Strategy for a
Battery/Supercapacitor Electric Bus with an
Integrated Fast Charger/Bus Stop Station
Investigation on Transient Emissions of a
Turbocharged Diesel Engine Fuelled by
HVO Blends
Model-Based Analysis of Active and Passive
Balancing for Electric Vehicles and HybridElectric Vehicles
(2013-01-1526)
(2013-01-1459)
(2013-01-1307)
(2013-01-1755)
Luiz Soeiro, Luciano Cyrne, Leandro
Figueiredo, Fiat Brazil S/A; Christopher
LaRochelle, Chrysler Group LLC; Maumi
Tsurumaki, Johnson Controls PS do Brasil
Ltda
Yi-Hsuan Hung, Hong-Wei Li, Hung-Chun
Lee, National Taiwan Normal University;
Chien-An Chen, Automotive Research &
Testing Center; Chien Hsun Wu, Industrial
Technology Research Institute
Cheng Tan, Hongming Xu, University
of Birmingham; Shi-Jin Shuai, Tsinghua
University; Akbar Ghafourian, Dai Liu, Jianyi
Tian, University of Birmingham
Zhenli Zhang, Johnson Controls; Brian Sisk,
Johnson Controls Power Solutions
Lithium-Ion Battery Pack for Stop and Start
System
Using Pneumatic Hybrid Technology to
Reduce Fuel Consumption and Eliminate
Turbo-Lag
Cold and Warm Start Characteristics using
HVO and RME Blends in a V6 Diesel Engine
Wireless Charging Guideline, SAE
TIR J2954: Performance, Safety and
Interoperability Considerations for the
Wireless Charging of Plug-In Vehicles
(2013-01-1538)
(2013-01-1452)
(2013-01-1306)
(Oral Only)
Yamato Utsunomiya, Yuki Nagai, DENSO
Corp.; Jun Kataoka, Hirobumi Awakawa,
Suzuki Motor Corp.
Ran Bao, Richard Stobart, Loughborough
University
Dai Liu, Hongming Xu, Jianyi Tian, Cheng
Tan, Birmingham Univ; Yanfei Li, Tsinghua
University
Performance Plus Range: Combined
Battery Concept for Plug‑In Hybrid Vehicles
Conceptualization and Implementation of an
AWD Parallel Hybrid Powertrain Concept
Transient Conditions Research on a V6
Diesel Engine Fuelled with Biodiesels
Wireless Charging: The Future of Electric
(2013-01-1525)
(2013-01-1448)
(2013-01-1302)
(Oral Only)
Jens Bockstette, VKA RWTH-Aachen;
Knut Habermann, Juergen Ogrzewalla, FEV
GmbH; Martin Pischinger, FEV Inc.; David
Seibert, FEV GmbH
Paul Venhovens, Pierluigi Pisu, Robert
Prucka, Bhavuk Makkar, Patrik Frommann,
Tejas Sonavane, Chris D’Amico, CU-ICAR
Clemson Univ Int’l Center For Automotive
Research
Jianyi Tian, Hongming Xu, Akbar
Ghafourian, Dai Liu, Cheng Tan,
Birmingham Univ; Shi-Jin Shuai, Tsinghua
University
Christopher Eric Borroni-Bird, Qualcomm
Inc.
152
TIME
O2-44
3:00
p.m.
3:20
p.m.
3:40
p.m.
O2-33
W2-68
W2-70
(PFL100)
Cold Start and Transients
(PFL211)
This session focuses on both SI and CI
combustion and mixture preparation
during cold start and transient engine
operation. Example topics include engine
performance, emissions, control strategies
and calibrations for cold start and transient
operation impact on NOx, PM, HC, CO,
and CO2 emissions; also including the
impact of variable valve timing, spark, and
turbocharger controls.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
Organizers:
Organizers:
GM Powertrain
Organizers:
Eric W. Curtis, Ford Motor Co.; Ouafae
El Ganaoui-Mourlan, IFP School; Peter
Moilanen, Ford Motor Co.; Hamidb Servati,
ServoTech. Engineering
Organizers:
University; Laura Marlino, Oak Ridge
National Laboratory; Constantine N. Raptis,
Mark A. Theobald, GM Powertrain; Serdar
Yonak, Infineon Technologies North America
Corp.
Connecting Vehicle Requirements with
Battery Design and Testing: Linking Drive
Cycles with Material Properties
Development of the Electrically-Controlled
Regenerative Braking System for Electrified
Passenger Vehicle
Improvement of Combustion Stability under
Cold Ambient Condition by Mixture Control
(2013-01-1523)
(2013-01-1463)
(2013-01-1303)
Brian Sisk, Peter Hallac, Qi Zhang, Zhenli
Zhang, Johnson Controls Power Solutions
Junzhi Zhang, Chen Lv, Xiaowei Yue,
Mingzhe Qiu, Dept. of Automotive Eng,
Tsinghua Univ; Jinfang Gou, Chengkun He,
Chinese Academy of Sciences
Manabu Hasegawa, Toru Nishizawa,
Yoshihiro Imaoka, Keiji Kawamoto, Atsushi
Teraji, Shuichi Iio, Nissan Motor Co., Ltd.
Battery Tab Dynamics under Ultrasonic
Welding
Dynamic Analysis and Experimental
Verification of a Clutchless Geared Smart
Transmission System for Hybrid Cars
(Oral Only)
(2013-01-1454)
Bongsu Kang, Purdue Univ-Fort Wayne;
Wayne Cai, General Motors; Chin-An Tan,
Wayne State Univ
Chiwoong Song, Sun Je Kim, KAIST; Sang
Hun Lee, Hyundai Wia; Kyung-Soo Kim,
Yong-San Yoon, KAIST
Measurement of Thermal Contact
Conductance between Battery Tabs
(Oral Only)
Jian Chen, Wei Zhang, Zhili Feng, Oak
Ridge National Laboratory; Wayne Cai,
General Motors
10:01
p.m.
10:02
p.m.
Operating Mode and Simulation Study
for an Electromagnetic Coupling Hybrid
Electric Vehicle (Written Only -- No Oral
Presentation)
The Effect of a Three-Way Catalytic
Converter on Particulate Matter from a
Gasoline Direct-Injection Engine During
Cold-Start (Written Only -- No Oral
Presentation)
Novel Operating Mode for DC-to-DC
Converters in PHEVs
(2013-01-1482)
(2013-01-1305)
(2013-01-1761)
Hanyu Chen, Chengji Zuo, Hefei University
of Technology
Ian Whelan, David Timoney, William Smith,
Univ. College Dublin; Stephen Samuel,
Oxford Brookes University
Bashar Khasawneh, Maha Sabra, M. Zohdy,
Oakland University
Lubricants Activity
Lubricants Activity
Two Motor Two Speed Power-Train System
Research of Pure Electric Vehicle (Written
(2013-01-1480)
Bo Zhu, University of Technology Sydney;
Nong Zhang, Paul Walker, University of
Technology, Sydney; Wenzhang Zhan,
Beijing Automobile Group; Wei Yueyuan,
Nanji Ke, BAIC Motor Electric Vehicle
Co.Ltd; Xingxing Zhou, University of
Technology Sydney
10:03
p.m.
Development of a Hydraulic Hybrid System
for Urban Traffic (Written Only -- No Oral
Presentation)
(2013-01-1479)
Sebastian Wohlgemuth, Georg
Wachtmeister, TU Muenchen; Peter Kloft,
HYDAC Technology GmbH
Lubricants Activity
Lubricants Activity
TIME
W2-66
W2-67
W2-64
W2-65
(PFL205)
of 3) (PFL210)
Exhaust Heat Transfer (PFL214)
This session focuses on fundamental numerical
(1D and 3D CFD) and experimental research
in the areas of heat and mass transfer and
fluid flow that impacts engine and vehicle
performance and design. Subject areas
include convection, conduction, radiation,
porous media, phase change including boiling,
condensation, melting and freezing. Application
areas include, combustion, emissions, cooling,
lubrication, exhaust, intake, fuel delivery,
external air flow, under hood and under body.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 5:00 p.m.
Organizers:
Andrea Strzelec
Organizers:
Organizers:
University; Thomas Edward Briggs, Southwest
Research Institute; Raj Ranganathan,
Showatech Inc.; Martin Tuner, Lund Univ.
Organizers:
Christopher Gehrke, Caterpillar Inc.; Scott
Goldsborough, Argonne National Laboratory;
Nebojsa Milovanovic, Mahle Powertrain, Ltd.;
Samveg Saxena; Hongming Xu, Birmingham Univ.
Chairpersons:
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
3:00
p.m.
154
Water Separation Challenge for Brazilian
Diesel Engine
Development and Evaluation of the
Performance Characteristics of a PolyDisperse Droplet Stream Generator
Simulation of Organic Rankine Cycle Electric
Power Generation from Light-Duty Spark
Ignition and Diesel Engine Exhaust Flows
Experimental Investigation of Light-Medium
Load Operating Sensitivity in a Gasoline
Compression Ignition (GCI) Light-Duty
Diesel Engine
(2013-01-1693)
(2013-01-1617)
(2013-01-1644)
(2013-01-0896)
Fernando Jun Yoshino, Gisela Ablas
Marques, Felipe Ferrari, MAHLE Metal
Leve S/A
Huifeng Gong, Xing Wang, Zhilong Li,
Weidi Huang, Zongjie Hu, Liguang Li, Tongji
University
Ryan Valentino, Matthew J. Hall, Univ. of
Texas-Austin; Thomas Briggs, Southwest
Research Institute
Paul Loeper, Youngchul Ra, Cory Adams,
David Foster, Jaal Ghandhi, Michael Andrie,
Roger Krieger, Univ. of Wisconsin Madison;
Russ Durrett, General Motors Company
Diesel Fuel Cleanliness at Filter Outlet in
Vehicle Real Life Conditions
A Study on the Hole-to-Hole Spray Variation
Based on Nozzle Internal Structure
Experimental Validation of a Dynamic Waste
Heat Recovery System Model for Control
Purposes
Pressure Sensitivity of HCCI Auto-Ignition
Temperature for Gasoline Surrogate Fuels
(2013-01-1696)
(2013-01-1611)
(2013-01-1647)
(2013-01-1669)
Nicolas Arnault, Guy Monsallier, SOGEFI
Group
Ya Gao; Weidi Huang, Tongji Univ.; Yuan
Gao, Argonne National Laboratory; Jun
Deng, Zongjie Hu, Zhijun Wu, Liguang Li,
Tongji Univ
Emanuel Feru, Technische Universiteit
Eindhoven; Frank Kupper, Chepa Rojer,
Xander Seykens, Fabio Scappin, Frank
Willems, TNO Automotive; Jeroen Smits,
DAF Trucks; Bram De Jager, Maarten
Steinbuch, Technische Universiteit Eindhoven
Ida Truedsson, Martin Tuner, Bengt
Johansson, Lund University; William
Cannella, Chevron
Commercial Naphtha Blends for Partially
Premixed Combustion
Effect of Nozzle Geometry on Macroscopic
Behavior of Diesel Spray in the Near-Nozzle
Field
Study of Parallel Turbocompounding for
Small Displacement Engines
Investigation of Pressure Oscillation Modes
and Audible Noise in RCCI, HCCI, and CDC
(2013-01-1681)
(2013-01-1587)
(2013-01-1637)
(2013-01-1652)
C.A.J. Leermakers, P.C. Bakker, L.M.T.
Somers, L.P.H. de Goey, B.H. Johansson,
Eindhoven University of Technology
Weidi Huang, Zhijun Wu, Huifeng Gong,
Ya Gao, Jun Deng, Zongjie Hu, Liguang Li,
Tongji Univ.
Youssef Ismail, VALEO-Ecole Centrale de
Nantes; David Durrieu, Pascal Menegazzi,
VALEO; Pascal Chesse, Ecole Centrale de
Nantes; David Chalet, Ecole Centrale De Nantes
Martin Wissink, Univ of Wisconsin; Zhi
Wang, Tsinghua Univ; Derek Splitter,
Arsham Shahlari, Rolf Reitz, Univ of
Wisconsin
Butanol-Diesel Blends for Partially Premixed
Combustion
Investigation of Key Mechanisms for Liquid
Length Fluctuations in Transient Vaporizing
Diesel Sprays
BSFC Improvement by Diesel-Rankine
Combined Cycle in the High EGR Rate and
High Boosted Diesel Engine
Comparison of Compression Ignition
Engine Noise Metrics in Low-Temperature
Combustion Regimes
(2013-01-1683)
(2013-01-1594)
(2013-01-1638)
(2013-01-1659)
C.A.J. Leermakers, P.C. Bakker, L.M.T.
Somers, L.P.H. de Goey, B.H. Johansson,
Eindhoven University of Technology
Jaclyn Johnson, Michigan Technological Univ.;
Hai-Wen Ge, ESI Mindware Inc; Jeffrey Naber,
Seong-Young Lee, Michigan Technological
Univ; Eric Kurtz, Nan Robarge, Ford Motor Co
Takuya Yamaguchi, Kurume Institute of
Technology; Yuzo Aoyagi, Hideaki Osada,
Kazuaki Shimada, Noboru Uchida, New Ace
Inst Co Ltd
Arsham J. Shahlari, Univ. of Wisconsin
Madison; Chris Hocking, Eric Kurtz, Ford
Motor Co; Jaal Ghandhi, Univ of Wisconsin
Madison
Effect of Port Injected Ethanol on
Combustion Characteristics in a Dual-Fuel
Light Duty Diesel Engine
An Experimental Approach in the Impact of
Electric Fields on Liquid Fuel Spray Injection
Testing a 50kW ORC at Different Heating
and Cooling Source Conditions to Map the
Performance Characteristics
Effects of Biofuel Blends on RCCI
Combustion in a Light-Duty, Multi-Cylinder
Diesel Engine
(2013-01-1692)
(2013-01-1607)
(2013-01-1649)
(2013-01-1653)
Gabriele Di Blasio, Carlo Beatrice, Istituto
Yaru Najem Mendez Hernandez, GE Global
Motori CNR; Santiago Molina, CMT Motores Research Europe; Michele Bardi, Juan Viera, Raul
Termicos
Payri, CMT-Universidad Politecnica de Valencia
Vamshi K. Avadhanula, Chuen-Sen Lin,
Thomas Johnson, University of Alaska
Fairbanks
Reed Hanson, Scott Curran, Robert
Wagner, Oak Ridge National Laboratory;
Rolf Reitz, Univ of Wisconsin
Study of the Effect of the Engine
Parameters Calibration to Optimize the Use
of Bio-Ethanol/RME/Diesel Blend in a Euro5
Light Duty Diesel Engine
High Pressure Poppet Injector with
Electronic Flow Rate Control and Spray
Guiding
Additional Power Generation from the
Exhaust Gas of Diesel Engine by Bottoming
Rankine Cycle
Particle Size and Number Emissions from
RCCI with Direct Injections of Two Fuels
(2013-01-1695)
(2013-01-1589)
(2013-01-1639)
(2013-01-1661)
Pierpaolo Napolitano, Univ. degli Studi di
Napoli Federico II; Chiara Guido, Carlo
Beatrice, Gabriele Di Blasio, Istituto Motori
CNR
Andrew Meyer, Beginnings Technology Inc.
Shekh Nisar Hossain, Saiful Bari, University
of South Australia
Christopher Kolodziej, Argonne National
Laboratory; Martin Wissink, Derek Splitter, Reed
Hanson, Rolf Reitz, Univ of Wisconsin; Jesus
Benajes, Universitat Politècnica de València
The Effects of EGR and Injection Timing
on the Engine Combustion and Emission
Performances Fueled by butanol-Diesel Blends
Flash Boiling: Easy and Better Way to
Generate Ideal Sprays than the High
Injection Pressure
Analysis and Comparison of Typical Exhaust
Gas Energy Recovery Bottoming Cycles
Research on Gasoline Homogeneous
Charge Induced Ignition (HCII) by Diesel in a
Light-Duty Engine
(Oral Only)
(2013-01-1614)
(2013-01-1648)
(2013-01-1666)
MIng Huo, Univ of Illinois at UrbanaChampaign; Chia-Fon Lee, Univ of Illinois
and Tsinghua Univ; Haifeng Liu, Tianjin
University
Min Xu, Yuyin Zhang, Wei Zeng, Gaoming
Zhang, Ming Zhang, Shanghai Jiao Tong
Univ
Zhengxin Xu, Jingping Liu, Jianqin FU,
Chengqin Ren, Hunan University
Dingwei Gao, Great Wall Motor Co.; Chao
Yu, Tsinghua Univ; Wenbin Yu, Great
Wall Motor Co.; Jianxin Wang, Zhi Wang,
Tsinghua Univ; Jichun Liu, Zhiqiang Kang,
Wei Guo, Great Wall Motor Co.
TIME
W2-66
W2-67
W2-64
W2-65
(PFL205)
of 3) (PFL210)
Exhaust Heat Transfer (PFL214)
This session focuses on fundamental numerical
(1D and 3D CFD) and experimental research
in the areas of heat and mass transfer and
fluid flow that impacts engine and vehicle
performance and design. Subject areas
include convection, conduction, radiation,
porous media, phase change including boiling,
condensation, melting and freezing. Application
areas include, combustion, emissions, cooling,
lubrication, exhaust, intake, fuel delivery,
external air flow, under hood and under body.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 5:00 p.m.
Organizers:
Andrea Strzelec
Organizers:
Organizers:
University; Thomas Edward Briggs, Southwest
Research Institute; Raj Ranganathan,
Showatech Inc.; Martin Tuner, Lund Univ.
Organizers:
Christopher Gehrke, Caterpillar Inc.; Scott
Goldsborough, Argonne National Laboratory;
Nebojsa Milovanovic, Mahle Powertrain, Ltd.;
Samveg Saxena; Hongming Xu, Birmingham Univ.
Chairpersons:
3:20
p.m.
Effect of Injection Pressures and Timings on
the Performance Emission and Combustion
Characteristics of a Direct Injection Diesel
Engine using Biodiesel-Diesel-Ethanol Blend
Investigation of Fuel Atomization and
Evaporation of a DISI Injector Spray Under
Homogeneous Charge Conditions
Numerical and Experimental
Characterization of the Dual-Fuel
Combustion Process in an Optically
Accessible Engine
(2013-01-1699)
(2013-01-1597)
(2013-01-1670)
G.R Kannan, PSNA College of Engineering
& Technology
Markus Heldmann, Tobias Knorsch, Michael
Wensing, FAU Erlangen-Nuremberg
Radu Florea, Southwest Research Institute
High-Speed Characterization of ECN Spray
A Using Various Diagnostic Techniques
Characterization of PCCI Combustion in a
Single Cylinder CI Engine fuelled with RME
and Bio-Ethanol
(2013-01-1616)
(2013-01-1672)
Maarten Meijer, Eindhoven University Of
Technology; Jonas Galle, Ghent University;
L.M.T. Somers, Eindhoven University Of
Technology; J.G.H Griensven, Technical
University - Eindhoven; Sebastian Verhelst,
Ghent University
Ezio Mancaruso, Bianca Maria Vaglieco,
Istituto Motori CNR
3:40
p.m.
4:00
p.m.
Dual-Fuel Effects on HCCI Operating Range:
Experiments with Primary Reference Fuels
(2013-01-1673)
Ali Aldawood, Saudi Aramco; Sebastian
Mosbach, Markus Kraft, University of
Cambridge; Amer Amer, Saudi Aramco
4:20
p.m.
An Experimental Investigation of DieselGasoline Blends Effects in a Direct-Injection
Compression-Ignition Engine Operating in
PCCI Conditions
(2013-01-1676)
Jesus Benajes, Alberto Broatch, Antonio
Garcia, Luisa Monico Muñoz, Universitat
Politecnica de Valencia
4:40
p.m.
Effect of Cetane Improvers on Gasoline,
Ethanol, and Methanol Reactivity and the
Implications for RCCI Combustion
(2013-01-1678)
Adam B. Dempsey, N. Ryan Walker, Rolf
Reitz, Univ. of Wisconsin
10:01
p.m.
Experimental Analysis of Diesel Engine Fueled
with E-diesel Produced from Madhuca Indica
Flowers with Addition of Ignition Improver
Characteristics of High Pressure Jets for
Direct Injection Gas Engine (Written Only
(2013-01-1700)
(2013-01-1619)
Dulari Hansdah, Bhagyashree Suna,
Murugan Sivalingam, NIT Rourkela, India
Jingzhou Yu, Ville Vuorinen, Ossi Kaario,
Teemu Sarjovaara, Martti Larmi, Aalto
University
Lubricants Activity
Lubricants Activity
Lubricants Activity
Lubricants Activity
TIME
W2-69
W2-63
(Part 3 of 3) Emission Control
(PFL300)
Ignition and Pre-Ignition (PFL201)
hybrid operation.
Part 3 of 3: Ignition and Pre-Ignition
Variable Valve Actuation mechanisms,
devices, and systems; and the impact
and control of such systems on
thermodynamics, combustion, fuel
economy, emissions, and performance.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Organizers:
Organizers:
Steven Nelson Ernest, Jacobs Vehicle
Systems Inc.; Timothy Kunz, Delphi
Automotive PLC; James Robert Westbrook,
Chrysler Group LLC
Chairpersons:
Richard Davis, General Motors LLC
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
O2-35/36
Immission Oriented Engine NOx Control
The Impact of Spark Discharge Pattern
on Flame Initiation in a Turbulent Lean and
Dilute Mixture in a Pressurized Combustion
Vessel
Development of a High Performance TwoCycle Engine Brake for Medium and Heavy
Duty Diesel Engines
(2013-01-0346)
(2013-01-1627)
(2013-01-0586)
Christoph Rafetzeder, Johannes Kepler
University Linz; Luigi del Re; Stephan
Stadlbauer; Harald Waschl, Johannes
Kepler University Linz
Anqi Zhang, Khanh Cung, Seong-Young
Lee, Jeffrey Naber, Michigan Technological
Univ; Garlan Huberts, Michael Czekala,
Qiuping Qu, Ford Motor Co
Neil Fuchs, Zdenek Meistrick, Steven
Ernest, Gabe Roberts, Justin Baltrucki,
Jacobs Vehicle Systems Inc.
A Post-Catalyst Control Strategy Based on
Oxygen Storage Dynamics
Impact of Ignition Energy Phasing
and Spark Gap on Combustion in a
Homogenous Direct Injection Gasoline SI
Engine Near the EGR Limit
“OptiVent” - A New Approach for Controlling
Mass Air Flow and Combustion in Direct
Injection SI-Engines
(2013-01-0352)
(2013-01-1630)
(2013-01-0592)
Michael Tomforde, IAV; Wolfgang
Drewelow, University of Rostock; Peter
Duenow, University of Wismar; Bernhard
Lampe, University of Rostock; Matthias
Schultalbers, IAV
Wei Chen, Daniel Madison, Paul Dice,
Jeffrey Naber, Bo Chen, Scott Miers,
Michigan Technological University; Michael
Czekala, Ford Engine Div; Chris Glugla,
Qiuping Qu, Garlan Huberts, Ford Motor Co
Jörn Getzlaff, Thomas Lambert, West
Saxon University Zwickau; Karl Heinz
Hoffman, Andreas Fischer, Chemnitz
A Fast Crank Angle Resolved ZeroDimensional NOx Model Implemented on a
Field-Programmable Gate Array
A High-Energy Continuous Discharge
Ignition System for Dilute Engine
Applications
Friction and Pumping Losses Estimation
in Flex Internal Combustion Engines with
Variable Valve Actuation System using
Chamber Pressure Measurement (paper
approved by SAE Brazil- 2012-36-0363)
(2013-01-0344)
(2013-01-1628)
(Oral Only)
Kenan Muric, Scania CV AB / Lund
University; Per Tunestal, Lund University;
Ola Stenlaas, Scania CV AB
Terrence Alger, Jess Gingrich, Charles
Roberts, Barrett Mangold, Southwest
Research Institute; Mark Sellnau, Delphi
Corp
Lucymara De Resende Alvarenga, Marcela
Esteves Vianna, Marcio Caldeira Pierobom,
Rodrigo Viegas Andrade, Fiat Powertrain
Technologies
Application of Reference Governor Using
Soft Constraints and Steepest Descent
Method to Diesel Engine Aftertreatment
Temperature Control
Experimental Study of a Pre-Chamber Jet
Igniter in a Turbocharged Rotax 914 Aircraft
Engine
Investigation of VVA-Based Exhaust
Management Strategies by Means of a HD
Single Cylinder Research Engine and Rapid
Prototyping Systems
(2013-01-0350)
(2013-01-1629)
(2013-01-0587)
Hayato Nakada, Toyota Motor Corporation;
Gareth Milton, Peter Martin, Ricardo UK
Ltd; Akiyuki Iemura, Akira Ohata, Toyota
Motor Corporation
Eric K. Anderson, Los Alamos National
Laboratory; William P. Attard; Adam Brown,
Innovative Scientific Solutions Inc.; Paul
Litke, Air Force Research Laboratory; Keith
Grinstead, John Hoke, Innovative Scientific
Solutions Inc.
Sebastian Gehrke, Dávid Kovács, Peter
Eilts, Technische Universität Braunschweig;
Alexander Rempel, Peter Eckert, IAV
A Semi-Physical NOx Model for Diesel
Engine Control
Laser Ignition of Single Cylinder Engine and
Effects of Ignition Location
Progress in Camless Variable Valve
Actuation with Two-Spring Pendulum and
Electrohydraulic Latching
(2013-01-0356)
(2013-01-1631)
(2013-01-0590)
Carole Quérel, Olivier Grondin, IFP Energies
Nouvelles; Christophe Letellier, CORIA Université de Rouen
Dhananjay Srivastava, Indian Institute of
Technology - Kanpur; Avinash Kumar
Agarwal, I I T Kanpur
Zheng David Lou, Qiangquan Deng, Shao
Wen, Yunhai Zhang, Mengjin Yu, Jiangsu
Gongda Power Technologies Ltd.; Ming
Sun, Jiangnan University; Guoming Zhu,
156
TIME
W2-69
W2-63
(Part 3 of 3) Emission Control
(PFL300)
Ignition and Pre-Ignition (PFL201)
hybrid operation.
Part 3 of 3: Ignition and Pre-Ignition
Variable Valve Actuation mechanisms,
devices, and systems; and the impact
and control of such systems on
thermodynamics, combustion, fuel
economy, emissions, and performance.
1:00 p.m. - 3:20 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
Organizers:
Organizers:
Organizers:
Steven Nelson Ernest, Jacobs Vehicle
Systems Inc.; Timothy Kunz, Delphi
Automotive PLC; James Robert Westbrook,
Chrysler Group LLC
Chairpersons:
Richard Davis, General Motors LLC
2:40
p.m.
3:00
p.m.
O2-35/36
Transient Smoke Reduction Using a Hybrid
Combination of Dimensional and Empirical
Modeling
Investigations of Ignition Processes Using
High Frequency Ignition
Closed Loop Electromagnetic Valve
Actuation Motion Control on a Single
Cylinder Engine
(2013-01-0348)
(2013-01-1633)
(2013-01-0594)
Indranil Brahma, Bucknell Univ.
Clemens Hampe, Mot GmbH; Heiko
Kubach, Karlsruhe Institute Of Technology;
Ulrich Spicher, Karlsruhe Institute of
Technology; Georg Rixecker, Steffen Bohne,
Borg Warner
Rudolf Seethaler, University of British
Columbia Okangan; Charles R. Koch,
Univ. of Alberta; Ryan Chladny; Masoud
Mashkournia, Univ. of Alberta
Fuel Enrichment Control System by Catalyst
Temperature Estimation to Enable Frequent
Stoichiometric Operation at High Engine
Speed/Load Condition
Effects of EGR Dilution and Fuels on Spark
Plug Temperatures in Gasoline Engines
Development of Continuously Variable
Phase and Lift/Duration Mechanism for
Widely Available Automobile Engines
(2013-01-0341)
(2013-01-1632)
(2013-01-0591)
Hiroyuki Nose, Toshiaki Inoue, Setsuo
Katagiri, Akikazu Sakai, Takao Kawasaki,
Manabu Okamura, Nissan Motor Co., Ltd.
Raphael Gukelberger, Terrence Alger,
Barrett Mangold, Southwest Research
Institute; Jeff Boehler, Fram Group Autolite; Corey Eiden, Fram Group
Jun Bota, OGINO KOGYO Co., Ltd.;
Tomohisa Kumagai, IDAJ Co., Ltd.; Tatsuya
Kuboyama, Chiba Univ; Koichi Hatamura,
Hatamura Engine Research Office Ltd
Pre-Ignition and Super-Knock in TurboCharged SI Engines
Development of a Switching Roller Finger
Follower for Cylinder Deactivation in
Gasoline Engine Applications
(Oral Only)
(2013-01-0589)
Gautam Kalghatgi, Saudi Aramco
Andrei Radulescu, James McCarthy JR,
Scott Brownell, Eaton Corp.
3:20
p.m.
3:40
p.m.
A Control Oriented Model with Variable
Valve Timing for HCCI Combustion Timing
Control
(2013-01-0588)
Khashayar Ebrahimi, Charles Koch, Alex
Schramm, Univ of Alberta
10:01
p.m.
Optical Investigation on the Origin of PreIgnition in a Highly Boosted SI Engine
Using Bio-Fuels (Written Only -- No Oral
Presentation)
(2013-01-1636)
T. Hülser, G. Grünefeld, T. Brands, LTFD,
RWTH Aachen University; M. Günther, S.
Pischinger, VKA, RWTH Aachen University
Lubricants Activity
Lubricants Activity
Lubricants Activity
powertrain/propulsion
EXHIBITOR LIST
AdvanTech International........................913
Applus IDIADA.....................................1019
Center for Advanced Automotive
Technology.....................................1113P
Chrysler Group LLC, Powertrain............619
Convergent Science Inc......................1202
CW Bearing USA Inc.............................313
dSpace Inc............................................401
Energy Research Consultants..............227P
E.R. Wagner..........................................333
Evonik Industureis AG...........................213
FEV, Inc.................................................513
Henkel...................................................307
IAV Automotive Engineering...................819
Innova Rubbers Pvt Ltd.........................832
Iwis Engine Systems LP........................412
JATCO Ltd............................................536
Jinyoung Industrial Co Ltd...................1230
Korea Powder Metallurgy Co LTD........1225
Manthey Redmond Corp.......................936
Marsilli Group......................................1101
MEET Automotive................................1018
Naotech Co Ltd...................................1236
Phillips Screw Company........................839
PRIMAVIS SRL......................................533
Protean Electric...................................1001
Pyung Hwa Industrial Co Ltd...............1224
Raydiance...........................................712P
Reaction Design....................................801
REM Surface Engineering......................518
Rescale.............................................1115P
Scuderi Group.....................................1130
Co Ltd................................................437
SLW Automotive Inc..............................509
Smithers Rapra.....................................937
Software Cradle.....................................802
SPAL USA.............................................436
TM4 Inc...............................................613P
ULVAC...................................................424
WAISSI ENGINE LLC.............................632
Wayne State University......................1212P
Wuhan Hontrust Auto Pulley Ind
Co Ltd..............................................1014
Co Ltd..............................................1025
SAE 2013
Noise and Vibration
Conference and Exhibition
Don’t miss the only dedicated mobility noise, vibration
and harshness event in North America that will attract
automotive, commercial vehicle and aerospace
professionals from around the world!
May 20-23, 2013 • DeVos Place Convention Center
Grand Rapids, Michigan, USA
Topics of Discussion
• Engine/Powertrain/Drivetrain • Heavy Vehicle and Vehicle Exterior
• Numerical Methods • NVH Measurement • Passive and Active NVH
Control • Standards, Process and Perspectives • Vehicle Subsystem NVH
• Commercial and Specialty Vehicles
Maximize your Marketing Dollars – Reach 3 Mobility
Sectors Under 1 Roof!
Exhibit and sponsorship opportunities are available to profile your
company and are a great way to increase your exposure to this
diverse audience.
EXHIBIT • SPONSOR • PARTICIPATE
www.sae.org/nvc
Contact Vanessa Reddick at 1-724-772-7591 or [email protected]
for more information or to discuss how SAE can help you achieve
your marketing goals.
P126111
158
ADVANCING THE
MOBILITY INDUSTRY…
BY ADVANCING YOU
e-Learning from
SAE International
Convenient • Accessible
Timely • Relevant
SAE International presents a meeting place
for all engineers to move industry forward
by advancing technology, innovation and
personal development.
Plan to attend one of these upcoming
2013 SAE Events.
Noise and Vibration Conference and Exhibition
May 20-23, 2013 - Grand Rapids, Michigan, USA
Electronic Systems for Vehicle Propulsion and Intelligent
Vehicle Systems Symposium
An SAE Convergence® Program
September 17-18, 2013 - Troy, Michigan, USA
SAE International offers online based
learning in multiple formats to suit your
learning needs.
®
Live or Recorded Webinars—informative,
interactive content-rich classroom seminars
delivered via telephone/internet; available live and
on-demand
e-Seminars—industry expertise and instruction
with the convenience of anytime access
Fast Tracks—online short-courses that capture
the essence of a topic and teach you exactly what
you need to know - fast
Ford online courses—online courses from Ford
Motor Company that extend to you Ford’s engineering training on essential powertrain and quality
topics
Visit www.sae.org/e-learning for more information
and to access the course listings.
On-Board Diagnostics Symposium
September 25-27, 2013 - Indianapolis, Indiana, USA
Heavy Duty Vehicles Symposium - Technologies for High
Efficiency & Fuel Economy
September 29-30, 2013 - Rosemont, Illinois, USA
Commercial Vehicle Engineering Congress
October 1-3, 2013 - Rosemont, Illinois, USA
Brake Colloquium & Exhibition - 31st Annual
October 6-9, 2013 - Jacksonville, Florida, USA
Transmission & Driveline Symposium
October 16-17, 2013 - Troy, Michigan, USA
SAE/KSAE International Powertrains, Fuels & Lubricants
Meeting
October 21-23, 2013 - Seoul, South Korea
Thermal Management Systems Symposium
October 22-24, 2013 - Troy, Michigan, USA
Active Safety Systems Symposium
An SAE Convergence® Program
November 5-6, 2013 - Detroit - Dearborn, Michigan, USA
Access a complete event listing and register today:
sae.org/events
Stay current on the technology, increase
your knowledge, and positively affect your
organization’s bottom line with professional
development from SAE International®.
P135226
Technology
P110342
Innovation
Development
SAFETY/TESTING
Tues
Wed
Thur
AM
PM
AM
PM
AM
PM
Room No.
Page No.
-
-
4
4
-
-
D3-18
165, 170
-
-
-
-
-
D3-19
172
-
-
-
4
4
-
-
D3-22
170
4
-
-
-
-
-
D3-26
161
Human Factors in Driving and Automotive Telematics (B302)
-
-
-
-
D3-18
163
-
4
4
-
Human Factors in Seating Comfort (B303)
-
-
-
-
D3-22
162, 163
Motorsports Engineering (Part 1 of 2) (MSEC100)
Motorsports Engineering (Part 2 of 2) - Panel Discussion: Does
Motor Sports have any Relevance to the Automobile Industry
Today? If so, what is it? (MSEC100)
Occupant Protection:
-
-
4
-
-
-
M3-32
165
-
-
-
4
-
-
M3-32
172
Accident Reconstruction (Part 1 & 2) (B400)
-
-
4
4
-
-
D3-28
165, 170
Biomechanics (B401)
-
-
-
-
-
D3-22
173
Event Data Recorders (EDR) (B402)
-
-
-
-
4
4
-
D3-28
173
4
-
-
-
-
-
D3-23
161
-
-
-
-
4
-
D3-18
173
4
4
-
-
-
-
-
D3-28
161
-
-
-
-
-
M3-32
161
-
-
-
M3-32
163
-
-
-
-
D3-23
163
-
4
4
4
-
-
-
-
M3-32
164
-
-
4
4
-
-
D3-23
168, 172
-
4
-
-
4
-
D3-28
-
-
D3-20
164
177
173
-
-
4
-
-
-
D3-20
168
4
4
-
-
-
-
-
D3-24/25
162, 163
-
-
-
-
-
D3-24/25
162, 163
(Part 3 of 7): Unsteady Aerodynamics (B500)
-
4
-
-
-
-
D3-24/25
164
(Part 4 of 7): Cooling Airflow (B500)
-
-
-
-
-
D3-24/25
165
(Part 5 of 7): Aerodynamics Development II (B500)
-
-
4
4
-
-
-
D3-24/25
168
(Part 6 of 7): Fundamental Aerodynamics (B500)
-
-
-
-
D3-24/25
175
(Part 7 of 7): Test Facilities (B500)
-
-
-
-
4
4
-
D3-24/25
-
-
4
4
4
4
D3-17
175
168, 170,
175, 177
Active Safety and Advanced Driver Assistance Systems (Part 1 & 2)
(AC600)
Chat with the Experts: Motorsports (MSECCHAT100)
Driver Vision and Lighting Technology (B300)
Fire Safety (B200)
Integrated Safety Systems (B411)
Occupant Restraints (Air Bags, Seat Belts, Knee Bolsters,
Child Seats, etc.) (B403)
Pedestrian Safety (B404)
Rear Impact (B405)
Rollover (B406)
-
Safety Test Methodology (B407)
-
Side Impact (B408)
Structural Crashworthiness and Occupant Safety (Part 1 & 2)
(B409)
Vehicle Aggressivity and Compatibility (B410)
Primary Ride - Written Only (AC302)
Steering and Suspension Technology Symposium (AC300)
Tire and Wheel Technology (AC400)
Vehicle Aerodynamics
(Part 1 of 7): Aerodynamics Development (B500)
(Part 2 of 7): Fuel Economy (B500)
Vehicle Dynamics, Stability and Control (Part 1 - 4) (AC500)
160
TIME
D3-26
9:30
a.m.
9:50
a.m.
10:10
a.m.
10:30
a.m.
10:50
a.m.
D3-23
D3-28
Fire Safety (B200)
Occupant Protection: Integrated
Safety Systems (B411)
The fire safety session will focus on current
developments in the fields of vehicle fire
science, statistics, risks, assessment and
mitigation. Papers addressing vehicle
design, live-fire tests and fire investigation
issues applicable to traditional, electric
and alternatively fueled vehicles will be
presented.
This session presents four interesting
integrated active and passive safety system
topics in (1) parking brake use study, (2)
crash tests of cars with automatic pre-crash
braking, (3) a co-simulation-based approach
for validating integrated safety systems, and
(4) a portable data collection package for
monitoring driver research.
9:30 a.m. - 11:30 a.m.
9:30 a.m. - 10:50 a.m.
9:30 a.m. - 10:10 a.m.
9:30 a.m. - 10:30 a.m.
Organizers:
Steven Hodges, Alion Science &
Technology; Jeffrey Santrock, General
Motors LLC
Organizers:
Clifford C. Chou; Jerry Le, Ford Motor Co.
Organizers:
Carlos Arregui Dalmases; Jason R.
Kerrigan, UVA Center for Applied Biomech
Organizers:
Jarrod Carter, Origin Engineering; Donald
Parker, Exponent Inc.
Local Fire Department Responses to Fires
Involving Automobiles, Buses, and Larger
Trucks: 2006-2010 Estimates
Parking Brake Use Study
Flex-PLI Application to High-Bumper
Vehicles - Optimization of Supplemental
Weight
Lumbar Spine Injuries in Rear Impacts of
Different Severities
(2013-01-0210)
(2013-01-0199)
(2013-01-0215)
(2013-01-0221)
Marty Ahrens, National Fire Protection
Association
Steven Becker, Robson Forensic Inc.
Yoshiko Kawabe, Chinmoy Pal, Hiroyuki
Okuyama, Tomosaburo Okabe, Nissan
Motor Company, Ltd.
Nicholas Yang, Tack Lam, David Dainty,
Edmund Lau, Exponent
Practical Case Studies of Thermal Events
in Buses
Crash Tests with Automatic Pre-Crash
Braking Cars
Response Surface Generation for
Kinematics and Injury Prediction in
Pedestrian Impact Simulations
Characterization of Occupant Lower
Extremity Behavior During Moderate-toHigh Speed Rear Impacts
(2013-01-0212)
(2013-01-0200)
(2013-01-0216)
(2013-01-0222)
Aaron Jones, Nicole Schimpf, ITC Experts;
Normand Dube, First Group America
Peter Ruecker, DEKRA Automobil GmbH
Bingbing Nie, Yong Xia, Qing Zhou, Jun
Huang, Tsinghua Univ.; Bing Deng, Mark
Neal, General Motors Company
Steven Rundell, Allison Guiang, Brian
Weaver, Armstrong Forensic Engineers Inc.;
Eric G. Meyer, Lawrence Technological Univ.
Case Studies of Parking Brake Fires in
Commercial Vehicles
A Co-Simulation Based Approach for the
Validation of Integrated Safety Systems
A Supplemental Analysis of Selected TwoVehicle Front-to-Rear Collisions from the
NASS/CDS
(2013-01-0207)
(2013-01-0201)
(2013-01-0223)
Kerry Parrott; Douglas Stahl, Stahl
Engineering & Failure Analysis,LLC
Markus Schratter, Michael Karner, Peter
Wimmer, Daniel Watzenig, Virtual Vehicle
Research and Test Center; Christian Gruber,
BMW Group
Jack Leifer, Trinity University
Full-Scale Burn Test of a 1992 Compact
Pick-up Truck
A Transportable Instrumentation Package
for In-Vehicle On-Road Data Collection for
Driver Research
(2013-01-0209)
(2013-01-0202)
Jeff D. Colwell, Michael E. Cundy, Exponent
Yi L. Murphey, University of MichiganDearborn; Dev Kochhar, Ford Motor Co;
Fang Chen, Yinghao Huang, Yong Wang,
University of Michigan-Dearborn
Chairpersons:
Mario Haddad, Takata Holdings Inc.
Occupant Protection: Pedestrian
Safety (B404)
M3-32
Occupant Protection: Rear Impact
(B405)
Papers in this session are related to
advancing the science of occupant safety in
vehicle rear impact collisions.
Validity of Low Ventilation for Accident
Processing with Hydrogen Leakage from
Hydrogen-Fuelled Vehicle
(2013-01-0211)
Yohsuke Tamura, Takeuchi Masayuki, Japan
Automobile Research Institute; Kenji Sato,
Toho University
11:10
a.m.
Test Method for Fire Suppression Systems
in Bus and Coach Engine Compartments
(2013-01-0208)
Jonas Brandt, Håkan Modin, Fredrik Rosen,
Michael Försth, Raúl Ochoterena, SP
Technical Research Inst of Sweden
11:30
a.m.
Fire Fighting of Li-Ion Traction Batteries
(2013-01-0213)
Markus Egelhaaf, David Kress, Dieter
Wolpert, Thomas Lange, DEKRA Automobil
GmbH; Rainer Justen, Daimler AG; Hartung
Wilstermann, Deutsche ACCUmotive GmbH
& Co. KG
10:01
p.m.
Full-Scale Burn Test of a 2001 Full-Size
Pickup Truck (Written Only -- No Oral
Presentation)
(2013-01-0214)
Jeff D. Colwell, Exponent Inc.
Planned by Fire Safety Committee /
Planned by Occupant Protection Committee
/ Automobile Body Activity
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-24/25
9:30
a.m.
D3-24/25
Vehicle Aerodynamics (Part 1 of
7): Aerodynamics Development
(B500)
7): Fuel Economy (B500)
9:30 a.m. - 10:10 a.m.
10:30 a.m. - 11:10 a.m.
Organizers:
Adrian P. Gaylard, Jaguar Land Rover; Mark
E. Gleason, Arturo Guzman, Chrysler Group
LLC; Thomas N. Ramsay, Honda R & D
Americas Inc.
Organizers:
Gregory Fadler, Navistar; Adrian P. Gaylard,
Jaguar Land Rover; Mark E. Gleason,
Chrysler Group LLC; Kevin Golsch, Navistar
Determination of Vehicle Frontal Area Using
Image Processing
(2013-01-0203)
Drew D. Brennan, Jeremy Worm, Michigan
Technological University; Christopher
Morgan, General Motors Company
9:50
a.m.
A Combined Digital and Experimental
Process for the Aerodynamic Optimization
of the New Lavida
(2013-01-0204)
Qian Chen, Haibo Wu, Jiangbin Zhou,
Jinsong liu, Shanghai Volkswagen
Automotive Co Ltd
10:30
a.m.
Revisiting the Formulas for Tractive
and Braking Energy on the EPA Driving
Schedules
(2013-01-0766)
Gino Sovran
10:50
a.m.
Making the Best Out of Aerodynamics:
Platoons
(2013-01-0767)
Arturo Davila, Enric Aramburu, Alex Freixas,
Applus IDIADA
Planned by Vehicle Aerodynamics
Committee / Automobile Body Activity
Safety & Testing
Titles include:
Steering and Suspension
Technology, 2013
exchange of ideas. Remarks made by participants
or members of the audience cannot be quoted
or attributed to the individual or their company
unless express permission has been granted by
the individual and their company. Any record of
remarks, discussion, or photographs may not be
used unless express permission has been granted
162
Vehicle Dynamics, 2013
Active Safety and Advanced
Drive Assistance Systems, 2013
Structural Crashworthiness and
Occupant Safety, 2013
Accident Reconstruction, 2013
Vehicle Aerodynamics, 2013
Order today!
Phone: 1-877-606-7323 (U.S. & Canada)
Or 1-724-776-4970
P135213
TIME
D3-18
Human Factors in Driving and
Automotive Telematics (B302)
D3-22
M3-32
D3-23
Human Factors in Seating
Comfort (B303)
Occupant Protection: Rollover
(B406)
Occupant Protection: Safety Test
Methodology (B407)
Designing vehicles with good ergonomics
is one of the many factors needed to
achieve high customer satisfaction. A basic
source for comfort (or discomfort) lies in the
vehicle’s seats. To design for seat comfort
requires knowledge of the size of the driver,
the structure of the seat, the position of the
seat in the vehicle and the trip duration.
Papers in this session will include topics
such as seat back angle, vehicle packaging
and trip duration.
Papers and presentations in this session
are related to vehicular rollover. They
cover various aspects of occupant’ safety,
including vehicle design, restraint systems
design, crash test analysis, CAE simulations
and statistical trends analysis.
Safety Test Methodology Session presents
papers in advancement of auto- safetyrelated analytical/testing methods, including
(1) A new method for characterizing porous
structure, (2) a pediatric thorax FE model,
(3) testing and analysis of dynamic axial
buckling behavior of steel hot-section, (4)
analysis of the seat belt positioning in recent
NCAP tests, and (5) simulation of a sled
test method for studying vehicle soil-trip
rollovers.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 2:40 p.m.
1:00 p.m. - 2:40 p.m.
Organizers:
Daniel J. Selke, Mercedes-Benz USA LLC;
James Foley, Toyota Technical Center USA
Inc.; Kristin Kolodge, Chrysler
Organizers:
Jennifer M. Badgley, Lear Corp.; Currell L.
Pattie; Marilyn Vala, Chrysler Corp.
Organizers:
Jarrod Carter, Origin Engineering; Donald
Parker, Exponent Inc.
Organizers:
Clifford C. Chou; Anindya Deb, Indian
Institute Of Science; P. Miller II, MGA
Research Corp.
Chairpersons:
Helen A. Kaleto, MGA Research Corp.;
Robert W. McCoy, Ford Motor Co.
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
An Empirically Based Suggestion for
Reformulating the Glance Duration Criteria
in NHTSA’s Visual-Manual Interaction
Guidelines
Driver Preference for Fore-Aft Steering
Wheel Location
The Effectiveness of the National Advanced
Driving Simulator (NADS) in Evaluating the
Effect of Tire Tread Belt Detachments
A New Method for Characterization
of Porous Structure without Mercury;
Application to Porous Materials of Diesel
Particulate Filters
(2013-01-0444)
(2013-01-0453)
(2013-01-0467)
(2013-01-0457)
Mikael Ljung Aust, Sergejs Dombrovskis,
Jordanka Kovaceva, Bo Svanberg, Jan
ivarsson, Volvo Cars
Matthew Reed, Univ. of Michigan
Robert Rucoba, Robert Liebbe, Amanda
Duran, Lee Carr, Carr Engineering Inc.
Kazuki Nakamura, Kazushige Ohno, Ibiden
Co., Ltd.; Michihisa Koyama, Kyushu Univ.;
Akira Miyamoto, Nozomu Hatakeyama,
Kotaro Okushi, Masayuki MIYANO, Tohoku
Univ.
Driver Distraction: Are We Mistaking a
Symptom for the Problem?
Experimental Validation of the Computer
Aided Design Technique for Seat Comfort
Design and Evaluation
Test Methodology and Initial Results from a
Dynamic Rollover Test System
Experimental Validation of Pediatric Thorax
Finite Element Model under Dynamic
Loading Condition and Analysis of Injury
(2013-01-0439)
(2013-01-0448)
(2013-01-0468)
(2013-01-0456)
David Curry, John Meyer, Aaron Jones, ITC
Experts
Saed T. Amer, Landon Onyebueke,
Tennessee State Univ.
Jason R. Kerrigan, Jeremy Seppi, Jack
Lockerby, Patrick Foltz, Brian Overby, Jim
Bolton, Taewung Kim, Nate J. Dennis,
Jeff Crandall, UVA Center for Applied
Biomechanics
Binhui Jiang, Hunan Univ.; Haojie Mao,
Wayne State Univ.; Libo Cao, Hunan Univ.;
King H. Yang, Wayne State Univ.
Physiological Evaluation of Older Drivers’
Emotional States While Driving With and
Without Navigation in a Driving Simulator
Conceptualization and Implementation of
a 6-seater Interior Concept for a Hybrid
Mainstream Sports Car
FMVSS 226 Ejection Mitigation: A Review
Accurate Prediction of Dynamic Progressive
Buckling Behaviors of Single-Hat and
Double-Hat Steel Components under Axial
Loading
(Oral Only)
(2013-01-0449)
(2013-01-0469)
(2013-01-0458)
Se Jin Park, Murali Subramaniyam, Myung
Kug Moon, Hyun Kyoon Lim, Korea Res.
Inst. of Standards & Science
Paul Venhovens, Johnell Brooks, Arees
Uthayasuriyan, Yubin Xi, Chris D’Amico,
CU-ICAR Clemson Univ.
Nancy C. Evans, Michael J. Leigh, Ford
Motor Company
Bisheshwar Haorongbam, Anindya Deb,
Indian Institute Of Science; Clifford Chou
Assessment of a Safe Driving Program for
Novice Operators
Application of Quality Function Deployment
to the Prediction of Seat Comfort
Optical Measurement of High-Rate Dynamic
Vehicle Roof Deformation during Rollover
Analysis of Seat Belt Positioning in Recent
NCAP Crash Tests
(2013-01-0441)
(2013-01-0450)
(2013-01-0470)
(2013-01-0460)
Lance Clark, Philip Pidgeon, Kim Alexander,
Clemson University; Ken Rogich, Richard
Petty Driving Experience; John R. Wagner,
Clemson University; Matthew Jensen,
Florida Institute of Technology
Akindeji Ojetola, Landon Onyebueke,
Tennessee State University
Jack Lockerby, Jason Kerrigan, Jeremy
Seppi, Jeff Crandall, UVA Center for Applied
Biomechanics
Sean Haight, The George Washington
University; Randa Radwan Samaha,
National Crash Analysis Center; David Biss,
Automotive Safety Analysis Corporation
Pedal Misapplication: Crash Characteristics
and Contributing Factors
On The Contact Interfaces between the
Driver and the Vehicle Seat
Validation of Occupant Trajectory Model
using the Ford Expedition Dolly Rollover
Experimental Test Data
Parameter Identification of Sled Test
Method to Simulate Vehicle Soil Trip
Rollover Dynamic accurately by Numerical
Simulation Considering Soil-vehicle
Interaction
(2013-01-0446)
(2013-01-0455)
(2013-01-0472)
(2013-01-0459)
Jeya Padmanaban, Matthew Fitzgerald,
JP Research Inc; Joseph Marsh, Ivy
Consultancy
Ligia Munteanu, Dan Dumitriu, Veturia
Chiroiu, Institute of Solid Mechanics; Pier
Paolo Delsanto, Politecnico di Torino
Chad Hovey, Hovey Consulting LLC;
Elizabeth Raphael, Henry Xu, Delta V
Biomechanics Inc.
Tatsuya Fukushima, Masafumi Shitamichi,
Toshikazu Torigaki, Hidetoshi Sokusai,
Nissan Motor Company, Ltd.; Masato Nishi,
Takahiko Miyachi, JSOL Corporation
Networking Break
Development of a Methodology for
Simulating Seat Back Interaction Using
Realistic Body Contours
(2013-01-0452)
Jingwen Hu, Matthew Reed, Univ. of
Michigan
3:00
p.m.
Panel Discussion
Planned by Human Factors Committee /
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-28
Occupant Protection: Vehicle Aggressivity and
Compatibility (B410)
D3-24/25
Vehicle Aerodynamics (Part 3 of 7): Unsteady
Aerodynamics (B500)
Papers are invited on various aspects of vehicle-to-vehicle
crashes and issues of collision compatibility and occupant
safety. These may include but are not limited to topics such
as analysis of accident statistics, crash test results, computer
simulation procedures, vehicle design factors, etc.
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
M3-32
Occupant Protection: Side Impact (B408)
Papers are invited on all aspects of automotive
crashworthiness and occupant protection in side impacts,
including topics such as discussions of test data, CAE
methods, statistical analyses, automobile designs,
restraint systems and airbags, crash test methodology
and development of surrogates (test dummies). Additional
topics may include side impact safety considerations for
hybrid and electric propulsion vehicles.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 3:40 p.m.
3:20 p.m. - 4:20 p.m.
Organizers:
Joseph Marsh, Ivy Consultancy
Organizers:
Adrian P. Gaylard, Jaguar Land Rover; Mark E. Gleason,
Chrysler Group LLC; David Sims-Williams, Durham
University; Sandeep Sovani, ANSYS Inc.
Organizers:
Jeffery W. Sankey, Transportation Research Center Inc.;
Diana Kay Spurgeon, TRC Inc.; Mukul K. Verma
Effect of Vehicle Mass on Driver Relative Fatality Risk in
Vehicle-Vehicle Crashes
Unsteady Aerodynamics of an Oscillating Fastback Model
(2013-01-0466)
(2013-01-1253)
Yibing Shi, Guy Nusholtz, Chrysler Group LLC
Joshua Baden Fuller, Martin Passmore, Loughborough Univ.
Effect of Vehicle Mass: Comparison with NHTSA Studies and
Q&A
Experimental Study of Baseline Flow Characteristics for the
Realistic Car Model “DrivAer”
(Oral Only)
(2013-01-1251)
Guy S. Nusholtz, Chrysler LLC
Christoph Strangfeld, Dirk Wieser, Hanns-Joachim Schmidt,
Rene Woszidlo, Christian Nayeri, Christian Paschereit,
Technische Universität Berlin
Crashworthiness of Modern Mini & Micro Cars
Wind-Tunnel & On-road Wind Noise:
Comparison & Replication
(Oral Only)
(2013-01-1255)
David S. Zuby, Matthew L. Brumbelow, Insurance Institute for
Highway Safety
Mark Thompson, Simon Watkins, RMIT University; Jongman
Kim, Hyundai & Kia Corp.
Vehicle Compatibility in a Future Fleet
Aerodynamic Pitching Stability of Sedan-Type Vehicles
Influenced By Pillar-Shape Configurations
(Oral Only)
(2013-01-1258)
Priya Prasad
See Yuan Cheng, Universiti Teknikal Malaysia Melaka;
Makoto Tsubokura, Hokkaido University; Yoshihiro Okada,
Mazda Motor Corporation; Takuji Nakashima, Hiroshima
University; Takahide Nouzawa, Mazda Motor Corporation
Panel Discussion with Q & A: Vehicle Aggressivity and
Compatibility
Evaluation of the Aerodynamic and Aeroacoustic Response
of a Vehicle to Transient Flow Conditions
(2013-01-1250)
Moderators:
Joseph Marsh, Ivy Consultancy
Nicholas Oettle, Oliver Mankowski, David Sims-Williams,
Robert Dominy, Durham University; Claire Freeman, Jaguar
Land Rover
Panelists:
Matthew L. Brumbelow, Insurance Institute for Highway Safety
Guy S. Nusholtz, Chrysler LLC
Priya Prasad
2:40
p.m.
Investigation for the Effect of the External Noise Sources
onto the Interior Aerodynamic Noise
(2013-01-1257)
Naoki Hamamoto, Yasuhiko Okutsu, Kazuo Yanagimoto,
Mitsubishi Motors Corporation
3:00
p.m.
Computational Prediction of a Vehicle Aerodynamics Using
Detached Eddy Simulation
(2013-01-1254)
Natalia Castro, Omar D. Lopez, Luis Munoz, Universidad de
Los Andes
3:20
p.m.
Simulation of Rear Glass and Body Side Vehicle Soiling by
Road Sprays Using Transient Particle Tracking
Comparison of Dummy Kinematics and Injury
Response between WorldSID and ES-2 in Side Impact
(2013-01-1256)
(2013-01-0599)
Jonathan Jilesen, Exa Corporation; Adrian P. Gaylard,
Jaguar Land Rover; Bradley Duncan, Alex Konstantinov,
John Wanderer, Exa Corporation
Kazuya Iwata, Kaoru Tatsu, Hidetsugu Saeki,
Tomosaburo Okabe, Nissan
3:40
p.m.
Study of Side Door Intrusion Test Results
(2013-01-0600)
Chinmoy Mazumdar, Mukesh Mishra, Maruti Suzuki
India Limited
4:00
p.m.
Child Restraint Systems: Top Tether Effectiveness in
Side Impact Collisions
(2013-01-0601)
Joseph Neal, Janet Brelin-Fornari, Kettering University
Planned by Occupant Protection Committee / Automobile
Body Activity
Planned by Vehicle Aerodynamics Committee / Automobile
Body Activity
The papers in this session are available in SAE Technical
Paper Collection, COLL-TP-00329, and also individually. To
164
Planned by Occupant Protection Committee /
TIME
D3-18
M3-32
D3-28
Occupant Protection: Accident
Reconstruction (Part 1 of 2)
(B400)
D3-24/25
7): Cooling Airflow (B500)
Driver Assistance Systems (Part 1
of 2) (AC600)
Motorsports Engineering (Part 1
of 2) (MSEC100)
Active Safety & Advanced Driver Assistance
Systems help prevent accidents or mitigate
accident severity. Some these safety
systems provide alerts to the driver in critical
situations, while others respond to threats
by automatically braking and steering
the vehicle to avoid crashes. Today’s
ADAS systems are enabled by on-board
vehicle and environmental sensors such
as radars and cameras. In the future, V2X
communication will be added to enhance
safety functionality and performance.
A broad spectrum of Motorsports topics
covering safety, aerodynamics, hybrids,
modeling/simulation and engines will be
presented.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 8:40 a.m.
Organizers:
Joseph Kanianthra, Active Safety
Engineering LLC; Walter Kosiak, Delphi
Corp.
Organizers:
David A. Finch, Raetech Corp.; Raymond
Leto, TotalSim LLC; Wiley R. McCoy,
McLaren Performance Technologies;
Thomas N. Ramsay, Honda R&D Americas
Inc.; Michael Royce; J. Kirk Russell,
Performance Events Promotion LLC; H.
Robert (Bob) Welge, Robert’s Engineering
Development
Organizers:
Christopher D. Armstrong, KEVA
Engineering; Geoff Germane, Germane
Engineering; Stein E. Husher, KEVA
Engineering; Richard Frank Lambourn,
Transport Research Laboratory, Ltd.; L.
Daniel Metz
Organizers:
E. Gleason, Todd Lounsberry, Chrysler
Group LLC
This session deals with Cooling Airflow
aspects of aerodynamics testing and
measurement. Papers on climatic wind
tunnel facilities as well as techniques for
measuring cooling airflow on scale models,
full scale vehicles, and CFD are discussed.
Chairpersons:
Raymond Leto, TotalSim LLC; Wiley
R. McCoy, McLaren Performance
Technologies; Thomas N. Ramsay, Honda
R & D Americas Inc.; J. Kirk Russell,
Development
8:00
a.m.
Technical Keynote:The Status of NHTSA
Research on Advanced Forward Collision
Avoidance and Mitigation Systems
Technical Keynote
A Comparison of 25 High Speed Tire
Disablement Tests Involving Full and Partial
Tread Separations
A Review of Some Cooling Air Flow
Measurement Techniques for Model Scale,
Full Scale and CFD
(Oral Only)
(Oral Only)
(2013-01-0776)
(2013-01-0598)
W. Riley Garrott, National Hwy Traffic Safety
Admin
Ben Bowlby, Ben Bowlby Racing, LLC
Gray Beauchamp, Daniel Koch, Dana E.
Thornton, Kineticorp LLC
Timo Kuthada, FKFS
Friction, Tread Depth and Water; Laboratory
Investigations of Passenger Car Tire
Cornering Performance under MinimallyWet Conditions
The UOIT Automotive Centre of Excellence Climatic Test Facility
(2013-01-0789)
(2013-01-0597)
William Blythe, Debra E. Seguin, William
Blythe Inc.
Scott Best, Aiolos Engineering Corp.; John
Komar, Gary Elfstrom, Univ of Ontario
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
Characterization of Lane Departure Crashes
Using Event Data Recorders Extracted from
Real-World Collisions
Networking Break
Approach to Determine Slip Values Based
on the Intensity of Tire Marks with Respect
to Tire and Road Properties
(2013-01-0730)
(2013-01-0781)
Kristofer D. Kusano, Hampton C. Gabler,
Virginia Tech
Gunther Seipel, Hermann Winner,
Technische Universitat Darmstadt; Frank
Baumann, Ralf Hermanutz, Daimler AG
Status of Test Methods for Autonomous
Emergency Braking Systems - Results from
the Active Test Project
Race car setup optimization: an integrated
approach to the simulation of driver-vehicle
performance using fully based computer
simulation and a driving simulator
Determining When an Object Enters the
Headlight Beam Pattern of a Vehicle
(2013-01-0725)
(Oral Only)
(2013-01-0787)
Andrés Aparicio, Applus Idiada; Micha
Lesemann, Institut für Kraftfahrzeuge;
Henrik Eriksson, SP Technical Research Inst
of Sweden
Giuseppe Callea, BhaiTech
Jeffrey Muttart, CrashSafetyResearch.com;
Wade D. Bartlett, Mechanical Forensics
Engineering Services LLC; Chris D. Kauderer,
Kauderer & Associates; Grant L. Johnston,
Grant Johnston Consulting Engineers;
Matthew R. E. Romoser, University of
Massachusetts; Jan Unarski, Institute of
Forensic Research; Daniel Barshinger, Quest
Engineering & Failure Analysis Inc.
Subjective Evaluation of Advanced Driver
Assistance by Evaluation of Standardized
Driving Maneuvers
Race Car Aerodynamics - The Design
Process of an Aerodynamic Package for the
2012 Chalmers Formula SAE Car
Tire Friction Comparison of Three Tire Types
(2013-01-0724)
(2013-01-0797)
(2013-01-0783)
Stefan Bernsteiner, Graz University of
Technology; Daniel Lindvai-Soos, Magna
Steyr Fahrzeugtechnik AG & Co KG;
Reinhard Holl, Arno Eichberger, Graz
Sven Rehnberg, Lucas Börjesson, Robert
Svensson, Jonathan Rice, Chalmers Univ.
of Technology
Peter J. Leiss, Steven Becker, Gary Derian,
Robson Forensic Inc.
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-18
M3-32
D3-28
(B400)
D3-24/25
of 2) (AC600)
of 2) (MSEC100)
presented.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 8:40 a.m.
Organizers:
Corp.
Organizers:
Development
Organizers:
Daniel Metz
Organizers:
Group LLC
Chairpersons:
Development
9:40
a.m.
10:00
a.m.
Validation of a Driver Recovery Model Using
Real-World Road Departure Cases
Design of an Actively Controlled
Aerodynamic Wing to Increase High-Speed
Vehicle Safety
Uncertainty in Calculations Using
Lambourn’s Critical Speed Procedure
(2013-01-0723)
(2013-01-0802)
(2013-01-0779)
Allison Daniello, Kristofer Kusano, H. Gabler,
Virginia Tech
Yuping He, Univ. of Ontario Institute of
Technology
Wojciech Wach, Institute of Forensic
Research, Kraków
Design and Evaluation of Emergency Driving
Support Using Motor Driven Power Steering
and Differential Braking on a Virtual Test Track
Networking Break
Networking Break
V2V-Intersection Management at
Roundabouts
Ballistic Testing of Motorsport Windshields
Evaluation of Vehicle Kinematics Using GPS
and Other Technologies
(2013-01-0722)
(2013-01-0801)
(2013-01-0769)
Reza Azimi, Gaurav Bhatia, Raj Rajkumar,
Carnegie Mellon Univ.; Priyantha Mudalige,
GM Technical Center
John Patalak, Thomas Gideon, NASCAR
Adam Michener, John Scott, Ric Robinette,
Richard Fay, Fay Engineering Corp.
Limitations of an Integral Safety Concept in
Longitudinal Traffic to Meet Vision Zero
Occupant Rollover Protection in
Motorsports
Energy Dissipation in High Speed Frontal
Collisions
(2013-01-0728)
(2013-01-0800)
(2013-01-0770)
Hadj Hamma Tadjine, Benedikt Schonlau,
Robert Schwaiger, Klaus Krumbiegel, IAV
GmbH
John Patalak, Thomas Gideon, NASCAR
Cleve Bare, Daniel Peterson, Micky Marine,
Kevin Welsh, Exponent, Inc.
Examination of a Properly Restrained
Motorsport Occupant
Commercial Vehicle Skid Distance Testing
and Analysis
(2013-01-0804)
(2013-01-0771)
John Patalak, Thomas Gideon, NASCAR;
Kevin Bedsworth, Robert Butler, Gary
Rogers, Kevin Breen, William Fischer,
Engineering Systems, Inc.
(2013-01-0726)
Jaewoong Choi, Kyongsu Yi, Seoul National
Univ.
10:20
a.m.
10:40
a.m.
11:00
a.m.
11:20
a.m.
SAE Motorsports Safety Compendium
(Oral Only)
10:01
p.m.
Experimental Study on Vehicle to Road
Tracking Algorithm by Using Kalman Filter
Associated with Vehicle Lateral Dynamics
Extended Steady State Lap Time Simulation
for Analyzing Transient Vehicle Behavior
Brake Characteristics for a Bobtail Vehicle
and Comparison to Other Loading
Conditions (Written Only -- No Oral
Presentation)
(2013-01-0739)
(2013-01-0806)
(2013-01-0792)
Dongho Shin, Korea Univ. of Technology
and Education
Timo Völkl, Martin Muehlmeier, Audi AG;
Hermann Winner, Technische Universitat
Darmstadt
Fawzi P. Bayan, Anthony Cornetto, Ashley
Dunn, Ronny Wahba, Jeffrey Suway, SEA,
Ltd.; Yuri Prokrym; Andrew Price
166
TIME
D3-18
M3-32
D3-28
(B400)
D3-24/25
of 2) (AC600)
of 2) (MSEC100)
presented.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:20 a.m.
8:00 a.m. - 8:40 a.m.
Organizers:
Corp.
Organizers:
Development
Organizers:
Daniel Metz
Organizers:
Group LLC
Chairpersons:
Development
10:02
p.m.
10:03
p.m.
CFD and Experimental Optimization of
Formula SAE Race Car Cooling Air Duct
Tractor-Semitrailer Stability Following a
Steer Axle Tire Blowout at Speed and
Comparison to Computer Simulation
Models (Written Only -- No Oral
Presentation)
(2013-01-0799)
(2013-01-0795)
Sachin R Kamath, Prajwal Kumar M P,
Shashank S N, Vinay Damodaran, NITK,
Surathkal; Anand S R, Prakash Kulkarni,
IISc, Bangalore
Anthony Cornetto, Fawzi Bayan, Ashley
Dunn, Charles Tanner, Ronny Wahba,
Jeffrey Suway, Gary Heydinger, SEA, Ltd.;
Krishnan Chakravarthy, Dennis Guenther,
Ohio State Univ.
Assessment of Ear- and Tooth-Mounted
Accelerometers as Representative of
Human Head Response
(2013-01-0805)
John J. Christopher, Mark R. Sochor, U.Va.
Center for Applied Biomechanics; Joseph
Pellettiere, Federal Aviation Administration;
Robert Scott Salzar, U.Va. Center for
Applied Biomechanics
Planned by Automobile Chassis Activity /
Planned by Motorsports Engineering
Committee / Motorsports Engineering
Activity
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-17
Vehicle Dynamics, Stability and
Control (Part 1 of 4) (AC500)
D3-23
Occupant Protection: Structural
Crashworthiness and Occupant
Safety (Part 1 of 2) (B409)
This session is focused on vehicle dynamics
and controls using modeling and simulation,
and experimental analysis of passenger
cars, heavy trucks, and wheeled military
vehicles. This session addresses active
and passive safety systems to mitigate
rollover, yaw instability and braking issues;
driving simulators and hardware-in-theloop systems; suspension kinematics and
compliance, steering dynamics, advanced
active suspension technologies; and tire
force and moment mechanics.
D3-20
Tire and Wheel Technology
(AC400)
D3-24/25
II (B500)
Advanced concepts and modeling of tires
will be presented by industry and university
researchers.
8:00 a.m. - 10:40 a.m.
9:00 a.m. - 10:20 a.m.
9:00 a.m. - 10:40 a.m.
9:20 a.m. - 10:40 a.m.
Organizers:
W. Riley Garrott, National Hwy Traffic
Safety Admin; Mohamed Kamel Salaani,
Transportation Research Center Inc.; Gary
J. Heydinger, SEA, Ltd.; David R. Mikesell,
Ohio Northern University; Amandeep
Singh, US Army TARDEC; Mark Heitz,
Transportation Research Center Inc.; Paul
Grygier, Retired (Previously NHTSA)
Organizers:
Saeed Barbat, Jamel E. Belwafa, Ford
Motor Co.
Organizers:
John D. Andrus; Jaehyung Ju, Univ. of
North Texas; Neel K. Mani, Timothy A.
Marantis, Bridgestone Americas Inc.; Rick
S. Wallace, David L. Howland, General
Motors LLC
Organizers:
Adrian P. Gaylard, Adrian P. Gaylard, Jaguar
Land Rover; Mark E. Gleason, Chrysler
Group LLC; Bahram Khalighi
Chairpersons:
Motor Co
Chairpersons:
M. Kamel Salaani, Transportation Research
Center Inc.
8:00
a.m.
Optimal Wheel Torque Distribution for a
Four-Wheel-Drive Fully Electric Vehicle
(2013-01-0673)
Leonardo De Novellis, Aldo Sorniotti, Patrick
Gruber, Univ. of Surrey
8:20
a.m.
Optimal Torque Control for an ElectricDrive Vehicle with In-Wheel Motors:
Implementation and Experiments
(2013-01-0674)
Abtin Athari, Univ. of Waterloo; Saber Fallah,
Univ. of Surrey; Bin Li, Amir Khajepour,
Univ. of Waterloo; Shih-Ken Chen, Baktiar
Litkouhi, General Motors Company
9:00
a.m.
9:20
a.m.
An Approach to Vehicle Brake-By-Wire
Optimal Control Tracking Strategy
Idealized Vehicle Crash Test Pulses for
Advanced Batteries
Experimental and Numerical Analysis of the
Conceptual Next Generation Ecology Tire
(First Report)
(2013-01-0686)
(2013-01-0764)
(2013-01-0741)
Salem A. Haggag, Diaa Abidou, Ain Shams
University
Saeed Barbat, Mark Mehall, Ford Motor
Co.; Raviraj Nayak, General Motors
Company; Guy S. Nusholtz, Chrysler Group
LLC; Natalie M. Olds, USCAR; Yibing
Shi, Chrysler Group LLC; William Stanko,
Ford Motor Co.; Jenne-Tai Wang, General
Motors Company; Para Weerappuli, Ford
Motor Co.; Lan Xu, Chrysler Group LLC;
Krishnarao Venkata Yalamanchili, General
Motors Company
Isao Kuwayama, Hiroyuki Matsumoto,
Hisashi Heguri, Bridgestone Corp.
Modeling of a 6x4 Tractor and Trailers for
use in Real Time Hardware in the Loop
Simulation for ESC Testing
Selection of Optimal Design Parameters to
Achieve Improved Occupant Performance in
Frontal Impacts
Integrity Sensing with Smart Polymers and
Rubber Components on Vehicles (i.e. Tires,
Hoses, Seals)
Performance of an Automotive Under-Body
Diffuser Applied to a Sedan and a Wagon
Vehicle
(2013-01-0693)
(2013-01-0756)
(2013-01-0742)
(2013-01-0952)
Sughosh J. Rao, The Ohio State University;
Mohamed Kamel Salaani, Transportation
Research Center Inc.; Gary J. Heydinger,
SEA, Ltd.; Dennis A. Guenther, The Ohio
State University; W. Riley Garrott, National
Hwy Traffic Safety Admin.
Sairama Narayana Peddi, Mahindra &
Mahindra, Ltd.
Brittany Ann Newell, Gary Krutz, Keith
Harmeyer, Michael Holland, Purdue Univ.
Jesper Marklund, Combitech AB; Lennart
Lofdahl, Chalmers Univ. of Technology;
Hakan Danielsson, Chalmers Univ of
Technology; Gunnar Olsson, LeanNova
Engineering AB
Optimized Ride-Down Rate Control in
Frontal Impact and its Application in the
Energy Management of Occupant Restraint
System
Using Objective Vehicle Handling Metrics for
Tire Performance Evaluation and Selection
Investigation of Wheel Ventilation-Drag
using a Modular Wheel Design Concept
(2013-01-0760)
(2013-01-0743)
(2013-01-0953)
Shaobo Qiu, FAW Automotive Technology
Research Center; Hongjian Li, Faw
Automotive Technology Research Center;
Junyuan Zhang, Yue Ma, Jilin University
Automotive Engrg College; Yumin Hao, Faw
Automotive Technology Research Center
Srikanth Sivaramakrishnan, Saied Taheri,
Virginia Tech
Alexey Vdovin, Chalmers Univ. of
Technology; Sabine Bonitz, Technische
Universität Berlin; Christoffer Landstrom,
Continued
on Lofdahl,
next page
Lennart
Volvo Car Corporation;
Chalmers Univ. of Technology
9:40
a.m.
168
TIME
D3-17
D3-23
Crashworthiness and Occupant
Safety (Part 1 of 2) (B409)
D3-20
Tire and Wheel Technology
(AC400)
D3-24/25
II (B500)
Advanced concepts and modeling of tires
will be presented by industry and university
researchers.
8:00 a.m. - 10:40 a.m.
9:00 a.m. - 10:20 a.m.
9:00 a.m. - 10:40 a.m.
9:20 a.m. - 10:40 a.m.
Organizers:
Organizers:
Motor Co.
Organizers:
John D. Andrus; Jaehyung Ju, Univ. of
North Texas; Neel K. Mani, Timothy A.
Marantis, Bridgestone Americas Inc.; Rick
S. Wallace, David L. Howland, General
Motors LLC
Organizers:
Adrian P. Gaylard, Adrian P. Gaylard, Jaguar
Land Rover; Mark E. Gleason, Chrysler
Group LLC; Bahram Khalighi
Chairpersons:
Motor Co
Chairpersons:
M. Kamel Salaani, Transportation Research
Center Inc.
10:00
a.m.
10:20
a.m.
10:01
p.m.
10:02
p.m.
Validation of Real Time Hardware in the
Loop Simulation for ESC Testing with a 6x4
Tractor and Trailer Models
Influence of Welded Joints on the
Crashworthiness Response of Hybrid
Structural Elements
Development of Intelligent Tire System
Investigation of the Influence of Tyre
Geometry on the Aerodynamics of
Passenger Cars
(2013-01-0692)
(2013-01-0755)
(2013-01-0744)
(2013-01-0955)
Sughosh J. Rao, The Ohio State University;
Mohamed Kamel Salaani, Transportation
Research Center Inc.; Gary J. Heydinger,
SEA, Ltd.; Dennis A. Guenther, The Ohio
State University; Frank Barickman, National
Hwy Traffic Safety Admin.
Miguel Costas, Jacobo Diaz, Luis Esteban
Romera, Santiago Hernandez, University of
La Coruna; Raquel Ledo, CTAG
Hee Young Jo, Myungki Yeom, Jeongjin
Lee, Hyundai Motor Co.; Kyushik Park,
Mando Corp.; Jaegeun Oh, Corechips
Teddy Hobeika, Chalmers University of
Technology; Simone Sebben, Christoffer
Landstrom, Volvo Car Corporation
Online Estimation of Vehicle Stability Factor
for Electronic Stability Control
Tire Carcass Camber and Its Application for
Overturning Moment Modeling
Computational Study of Drag Reduction of
Models of Truck-Shaped Bodies in Ground
Effect by Active Flow Control
(2013-01-0690)
(2013-01-0746)
(2013-01-0954)
Chihiro Nitta, Hideaki Koto, Kenichiro
Takahashi, ADVICS Co., Ltd.
Dang Lu, Dawei Wang, Chunxue Wang,
Konghui Guo, Jilin Univ.
Ramesh K. Agarwal, Washington Univ. St.
Louis
Study on Objective Evaluation Index System
of On-Center Handling for Passenger Car
Objective Measurement of Vehicle Steering
and Handling Performance When a Tire
Loses Its Air (Written Only -- No Oral
Presentation)
(2013-01-0714)
(2013-01-0748)
Changfu Zong, Zexing Zhang, Li Mai,
Changqing Wang, Jilin University; Zhengxin
Wu
Donald F. Tandy, B. Nicholas Ault, Jason
Colborn, Robert Pascarella, Tandy
Engineering & Associates Inc.
Study of Stability Control for Electric
Vehicles with Active Control Differential
(2013-01-0715)
Zhuoping Yu, Yongqiang Deng, Lu Xiong,
Tongji University
10:03
p.m.
An Objective Analysis of the Effect of Tire
Tread Depth on Crash Causation and Wet
Road Vehicle Dynamics (Written Only -- No
Oral Presentation)
(2013-01-0701)
Donald F. Tandy, Clay Coleman, Tandy
Engineering & Associates Inc.; Rose Ray,
Exponent Inc.
Planned by Vehicle Dynamics Committee /
Automobile Chassis Activity
Planned by Tire and Wheel Committee /
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-18
of 2) (AC600)
D3-22
Driver Vision and Lighting
Technology (B300)
D3-28
(B400)
Automotive Active Safety Systems help
prevent accidents or mitigate accident
severity. Some active safety systems
provide warnings to the driver in critical
situations, while other systems respond
to threats by automatically braking and
steering the vehicle. Active Safety systems
are enabled by on-board sensors, together
with environmental sensors such as radars
and cameras. In the future, car-to-car
and car-to-infrastructure communication
will enhance system functionality and
performance.
D3-17
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 2:40 p.m.
Organizers:
Corp.
Organizers:
Jianzhong Jiao, Osram Opto
Semiconductors Inc.; Michael Flannagan,
Univ. of Michigan
Organizers:
Daniel Metz
Organizers:
Chairpersons:
Admin; M. Kamel Salaani, Transportation
1:00
p.m.
1:20
p.m.
1:40
p.m.
2:00
p.m.
2:20
p.m.
2:40
p.m.
Alert Method for Rear Cross Traffic Alert
System in North America
Single Reflector Full LED Headlamp with
Combined High and Low Beam
Four-Point Planar Homography Algorithm
for Rectification Photogrammetry:
Development and Applications
A Comparative Study of Car-Trailer
Dynamics Models
(2013-01-0732)
(Oral Only)
(2013-01-0780)
(2013-01-0695)
Yoshihiko Takahashi, Tetsuya Komoguchi,
Masato Seki, Toyota Motor Corp.; Nimesh
Patel, David Auner, Bruce Campbell, Toyota
Motor Engineering & Mfg NA Inc.
TBD
Chad Hovey, Hovey Consulting LLC; Angelo
Toglia, Collision Research & Analysis Inc
Yuping He, Jing Ren, Univ of Ontario
Hybrid Approach for a Future Environmental
Representation for Advanced Driver
Assistance Systems
LED Headlamp for DOE SuperTruck
The Accuracy of Photo-Based ThreeDimensional Scanning for Collision
Reconstruction Using 123D Catch
A Methodology to Assess Road Tankers
Rollover Trend During Turning
(2013-01-0733)
(2013-01-0753)
(2013-01-0784)
(2013-01-0682)
Andree Hohm, Ralph Grewe, Stefan Lueke,
Continental AG
Al Bolander, Timothy Brooks, Peter
Thompson, Grote Industries LLC
Mark S. Erickson, Jeremy J. Bauer, Wilson
C. Hayes, Hayes + Associates
Jose Antonio Romero, Eduardo BetanzoQuezada, Queretaro Autonomous
University; Alejandro Lozano-Guzman,
CICATA, National Polytechnic Institute
Development of Active Lane Keeping Assist
System
How to Make LED Concepts More
Affordable For Automotive Signal Lighting
Video Projection Mapping Photogrammetry
through Video Tracking
Design for Vehicle Rollover Warning System
(2013-01-0718)
(2013-01-0754)
(2013-01-0788)
(2013-01-0675)
JaeHee Kim, Sang Min Lee, Sung Kwang
Shin, Sang Ho Jeong, Hyundai & Kia Corp.
Miroslav Kropac, Varroc Lighting Systems
William T. Neale, James Marr, David Hessel,
Kineticorp LLC
Chun Hsiung Chen, Chi-Chun Yao, YuSheng Liao, Automotive Research & Testing
Center
Forward Collision Warning Timing in Near
Term Applications
Light Bulb Filament Distortion Thresholds by
Voltage and Delta-V
Networking Break
Decoupled 3D Moment Control for Vehicle
Motion Using In-Wheel Motors
(2013-01-0727)
(2013-01-0752)
(2013-01-0679)
Guy S. Nusholtz, Timothy P. Hsu, Manuel A.
Gracián, Jesús A. Prado, Rebeca Cedeño,
Nadia M. Santillán, David Herrera, Chrysler
Group LLC
Jay Przybyla, Thomas Rush, Daniel Melcher,
Sam Robinson, Armstrong Forensic
Engineers Inc
Etsuo Katsuyama, Toyota Motor Corp.
A Sensor Fusion Digital-Map System for
Driver Assistance
Headlamp Levelness and Glare: Preliminary
Analyses Based on Field Data
The Accuracy of Pedestrians in Estimating
the Speed of a Moving Vehicle
(2013-01-0734)
(2013-01-0749)
(2013-01-0785)
(Oral Only)
Kyungho Yoo, Hwayoung Kim, Hayong
Woo, Seongsu Im, Hui Sung Lee, Hyundai
Motor Co.
John D. Bullough, Rensselaer Polytechnic
Institute
Mark Strauss, James Carnahan, Ruhl
Forensic, Inc. / Univ. of Illinois Urbana;
Roland Ruhl, Ruhl Forensic, Inc.
Daniel Williams, TRW Commercial Steering
Systems
Considerations in HMI Design of a Reverse
Braking Assist (RBA) System
Modeling of Pedestrian Midblock Crossing
Effectivity of Automatic Glare Free High
Beam Lighting Devices in Night Time Driving Speed with Respect to Vehicle Gap
Acceptance
(2013-01-0720)
(2013-01-0751)
(2013-01-0772)
Dev Kochhar, Walter Talamonti, Louis
Tijerina, Ford Motor Co.
Rainer Neumann, Varroc Lighting Systems
GmbH
Joseph Jakym, Shady Attalla, Sam Kodsi,
Kodsi Engineering
The Effectiveness of the Use of the Side
View Camera for Reducing Accidents while
Changing Lanes
Using Data from a DriveCam Event
Recorder to Reconstruct a Vehicle-toVehicle Impact
3:00
p.m.
170
(2013-01-1027)
(2013-01-0778)
Kei Oshida, Haruhiko Nishiguchi, Honda
R&D Co Ltd
Nathan A. Rose, Neal R. Carter, David
Pentecost, William Bortles, Tilo Voitel,
Kineticorp LLC
Multi-Axle Dynamics (SAE 2012 L. Ray
Buckendale Lecture)
TIME
D3-18
of 2) (AC600)
D3-22
Driver Vision and Lighting
Technology (B300)
D3-28
(B400)
Automotive Active Safety Systems help
prevent accidents or mitigate accident
severity. Some active safety systems
provide warnings to the driver in critical
situations, while other systems respond
to threats by automatically braking and
steering the vehicle. Active Safety systems
are enabled by on-board sensors, together
with environmental sensors such as radars
and cameras. In the future, car-to-car
and car-to-infrastructure communication
will enhance system functionality and
performance.
D3-17
1:00 p.m. - 3:00 p.m.
1:00 p.m. - 3:40 p.m.
1:00 p.m. - 4:00 p.m.
1:00 p.m. - 2:40 p.m.
Organizers:
Corp.
Organizers:
Jianzhong Jiao, Osram Opto
Semiconductors Inc.; Michael Flannagan,
Univ. of Michigan
Organizers:
Daniel Metz
Organizers:
Chairpersons:
Admin; M. Kamel Salaani, Transportation
3:20
p.m.
Driver Visibility: Customer Insights and
Metric Development
Measuring and Modeling Suspensions of
Passenger Vehicles
(2013-01-1029)
(2013-01-0774)
Rajiv Mehta, John Martuscelli, General
Motors Company
Bradley E. Heinrichs, Jean-Francois Goulet,
Ryan Fix, Mathieu King, MEA Forensic
Engineers & Scientists
3:40
p.m.
Features of Pedestrian Injuries in Car-ToPedestrian Accidents in Japan
(2013-01-0777)
Yasuhiro Matsui, National Traffic Safety &
Enviro Lab.; Tsutomu Doi, Ibaraki Christian
University; Shoko Oikawa, Kenichi Ando,
National Traffic Safety & Enviro Lab.
10:01
p.m.
10:02
p.m.
10:03
p.m.
Planned by Automobile Chassis Activity /
Work-Energy Relationships for the Collinear
Single Degree of Freedom Impact Model
under the Case of Net Unbalanced
Externally Applied Forces (Written Only -No Oral Presentation)
Handling Stability Optimization of Mining
Dump Truck Based on Parameter
Identification (Written Only -- No Oral
Presentation)
(2013-01-0794)
(2013-01-0702)
Jai P. Singh, BEAR, Inc.; Nicholas J.
Carpenter, Collision Dynamics Analysis
Wenguang Wu, Zhengqi Gu, Hunan
University
Two-Dimensional Collision Simulations of
Low-Speed Crash Tests (Written Only -- No
Oral Presentation)
An Anti-Lock Braking Control Strategy for
4WD Electric Vehicle Based on Variable
Structure Control (Written Only -- No Oral
Presentation)
(2013-01-0793)
(2013-01-0717)
Eric Deyerl, Dial Engineering; Louis Cheng,
Applied BioMechanics; Jordan Gatti, Dial
Engineering
Hao Zhu, Zhuoping Yu, Lu Xiong, Hui
Zheng, Tongji University
Stiffness Coefficients of Heavy Commercial
Vehicles (Written Only -- No Oral
Presentation)
Directional Control of Articulated
Heavy Vehicles (Written Only -- No Oral
Presentation)
(2013-01-0796)
(2013-01-0711)
Nicolas Poirette, University of Maryland;
Fawzi P. Bayan, Jeffrey Suway, Anthony
Cornetto, Alfred Cipriani, Ronny Wahba,
SEA, Ltd.
S. Hamed Tabatabaei Oreh, Reza Kazemi,
Shahram Azadi, K N Toosi Univ. of
Technology
SAFETY/TESTING
SAFETY/TESTING
TIME
M3-32
D3-23
D3-19
Crashworthiness and Occupant Safety
(Part 2 of 2) (B409)
Chat with the Experts: Motorsports
(MSECCHAT100)
2:00 p.m. - 4:00 p.m.
2:00 p.m. - 3:20 p.m.
4:00 p.m. - 5:00 p.m.
Organizers:
Patrick H. Baer, Chrysler Group LLC; Lee Carducci,
Power-Tec Engineering; David T. Currier, Toyota
Racing Development USA; Patrick DiMarco, Ford
Motor Co.; Hubert Gramling, FIA Institute; Paul
Haney, InfoTire; Tim Holland, Lotus Engineering,
Ltd.; Ryan Hoover, IMMI (Indiana Mills & Mfg Inc);
Peter Hylton, Indiana Univ. Purdue Univ. Indianapolis;
William Kimberley, Racecar Graphic, Ltd.; John
Melvin, Tandelta; Matthew J. Meyer, GM Racing;
John Patalak, NASCAR; Dan Rivard; Michael Royce,
Albion Associates, LLC; Pete Spence, Toyota Racing
Development USA; Don Taylor, NHRA; Peter Thomas
Tkacik, UNC Charlotte Motorsports Engineering;
Timothy White, National Hot Rod Association; J.
Kirk Russell, Performance Events Promotion LLC;
Raymond Leto, TotalSim LLC; Wiley R. McCoy,
McLaren Performance Technologies; H. Robert (Bob)
Welge, Robert’s Engineering Development; Thomas
N. Ramsay, Honda R&D Americas Inc.; David A.
Finch, Raetech Corp.
Organizers:
Saeed Barbat, Jamel E. Belwafa, Ford Motor Co.
Motorsports Engineering (Part 2 of 2) Panel Discussion: Does Motor Sports
have any Relevance to the Automobile
Industry Today? If so, what is it?
(MSEC100)
This is an ongoing question, particularly in the era
of tight budgets and intense competition within the
industry. Other factors are now in play, such as the
challenging future fuel economy requirements and the
ongoing interest in hybrids and electric vehicles. This
is compounded by the desire for cost containment
trend within motor sports and the entry of hybrid race
cars from both Audi and Toyota in the 2012 Le Mans
Endurance race.
Chairpersons:
Saeed Barbat, Jamel E. Belwafa, Ford Motor Co
Keynote Speakers:
Naethan Eagles, TotalSim, Ltd.; David A. Finch,
Raetech Corp.; Raymond Leto, TotalSim LLC; Wiley
R. McCoy, McLaren Performance Technologies; John
Melvin, Tandelta; J. Kirk Russell, Retired; H. Robert
(Bob) Welge, Robert’s Engineering Development
Chairpersons:
Michael Royce
Moderators:
John McElroy, Blue Sky Productions
Panelists:
Jamie Allison, Ford North America Motorsports
Ben Bowlby, Ben Bowlby Racing, LLC
Scot Elkins, IMSA
Robert Larsen, OboTech. LLC
Pete Spence, Toyota Racing Development USA
2:00
p.m.
An Assessment of the Effects of Passenger Vehicle
Weight and Size on Accident and Fatality Risk Based
on Data for 1991 through 2007 Model Year Vehicles
(2013-01-0757)
R. Michael Van Auken, John W. Zellner, Dynamic
Research, Inc.
2:20
p.m.
Method Development of Multi-Dimensional Accident
Analysis Using Self Organizing Map
(2013-01-0758)
Hitoshi Uno, Yusuke Kageyama, Akira Yamaguchi,
Tomosaburo Okabe, Nissan
2:40
p.m.
Severe Frontal Collisions with Partial Overlap - Two
Decades of Car Safety Development
(2013-01-0759)
Lotta Jakobsson, Graeme McInally, Anders Axelson,
Magdalena Lindman, Anders Kling, Thomas
Broberg, Mikael Fermér, Linus Wågström, Volvo Car
Corporation
3:00
p.m.
Repeatability of a Small Overlap and an Oblique
Moving Deformable Barrier Test Procedure
(2013-01-0762)
James Saunders, Daniel Parent, NHTSA
Planned by Motorsports Engineering Committee /
Motorsports Engineering Activity
Planned by Occupant Protection Committee /
The papers in this session are available in SAE
Technical Paper Collection, COLL-TP-00328, and
also individually. To purchase visit collections.sae.org
172
Planned by Motorsports Engineering Committee /
Motorsports Engineering Activity
TIME
D3-22
Biomechanics (B401)
D3-28
Occupant Protection: Event Data
Recorders (EDR) (B402)
D3-18
Occupant Protection: Occupant
Restraints (Air Bags, Seat Belts,
Knee Bolsters, Child Seats, etc.)
(B403)
This session includes the latest research
on Event Data Recorders (EDRs) equipped
in passenger cars, light trucks, and
commercial vehicles (heavy trucks and
motorcoaches). Emphasis is placed on the
application, interpretation and use of EDRs
in the investigation of motor vehicle crashes.
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
9:20
a.m.
9:40
a.m.
D3-20
Technology Symposium (AC300)
The purpose of this session is to provide
a forum for presentations on steering and
suspension related topics as it applies to
ground vehicles. Papers for this session
should address new approaches as well
as advances in application of steering,
suspension related technologies.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 9:40 a.m.
Organizers:
Elizabeth Mary Fievisohn, Virginia Tech.;
Jacob L. Fisher, Exponent Inc.; Warren
N. Hardy, Virginia Tech.; David Raymond,
California State University - LA
Organizers:
John C. Steiner, KEVA Engineering; Timothy
Cheek, DELTA [v] Forensic Engineering;
Brian J. Everest, General Motors LLC;
Heath Spivey, Delta V Forensic Engrg
Organizers:
Aditya Belwadi, Childrens Hospital of
Philadelphia; Lisa Fallon, Scott D. Thomas,
General Motors LLC; Chris A. Van Ee,
Design Research Engineering
Organizers:
Robert Ackley, Ford Motor Co.; Prashant
Patel, Chrysler Group LLC
Foot and Ankle Injuries to Drivers in
Between-rail Frontal Crashes
Automotive Emergency Call and NG(Next
Generation)–911
Evaluation of Proposed Protocols for
Assessing LATCH Usability
The Development of Fr-based 4WD Multilink Suspension
(2013-01-1243)
(Oral Only)
(2013-01-1155)
(2013-01-1235)
Richard M. Morgan, George Washington
Univ.; Chongzhen Cui, Hunan Univ;
Kennerly Digges, George Washington Univ.;
Libo Cao, Hunan Univ; Cing-Dao Kan,
George Washington Univ.
America Inc.
Kathleen D. Klinich, Miriam Manary, Carol
Flannagan, Jamie Moore, Univ. of Mich.
Trans. Res. Inst.; Jessica Jermakian,
Insurance Institute for Highway Safety
DaeWoo Jung, Jae Kil Lee, Byung-Kyu Lee,
Seon Pyung Kim, Hyundai-Kia R&D Center
Development of Cost Effective Footpad
to Mitigate Lower Leg Injury During Anti
Vehicle IED Blast
Accuracy of Pre-Crash Speed Recorded
in 2009 Mitsubishi Lancer Event Data
Recorders
Distribution of Belt Anchorage Locations in
the Second Row of Passenger Cars and
Light Trucks
Performance Analysis of Suspension
Components for Electric Vehicles in Real
Road Conditions
(2013-01-1246)
(2013-01-1263)
(2013-01-1157)
(2013-01-1236)
Bhavesh Prabhulal Gangani, Anil Vidye, Tata
Motors Ltd.
Wesley Vandiver, Orange County District
Attorney’s Office; Isaac Ikram, Bryan
Randles, Biomechanical Research & Testing
Matthew Reed, Univ. of Michigan; Sheila
Ebert-Hamilton, UMTRI
Alexander Kruse, Alexander Gross, ZF
Friedrichshafen AG; Jan-Welm Biermann,
Institut fuer Kraftfahrwesen
Older Drivers’ Physiological Responses
during Last-Minute Braking In a Driving
Simulator
Accuracy and Characteristics of 2012
Honda CR-V Event Data Recorders
Performance of Belt-Positioning Boosters
and 5‑Point Harness CRSs in Frontal and
Side Impacts
Fault Detection in Automotive Semi-Active
Suspension: Experimental Results
(2013-01-1245)
(2013-01-1264)
(2013-01-1159)
(2013-01-1234)
Myung Kug Moon, Murali Subramaniyam,
Se Jin Park, Korea Res. Inst. of Standards
& Science
Aaron Diacon, Jeremy Daily, University of
Tulsa; Richard Ruth, Ruth Consulting Inc.;
Carsten Mueller, University of Tulsa
Paul R. Weber, William Van Arsdell, Charles
J. Stankewich, Brian Larson, Engineering
Principles LLC
Sébastien Varrier, GIPSA-Lab; Ruben
Morales-Menendez, Jorge De-Jesus
Lozoya-Santos, Diana Hernandez,
Tecnologico de Monterrey; John Martinez
Molina, Damien Koenig, GIPSA-Lab
The Effect of Age on
Fat and Bone Properties along the Vertebral
Spine
Validation of Event Data Recorders in High
Severity Full-Frontal Crash Tests
The Front Center Airbag
H∞ Control of a Novel Low-cost Rollplane Active Hydraulically Interconnected
Suspension: an Experimental Investigation
of Roll Control under Ground Excitation
(2013-01-1244)
(2013-01-1265)
(2013-01-1156)
(2013-01-1238)
Chantal Parenteau, Sven Holcombe, Peng
Zhang, Carla Kohoyda-Inglis, Stewart
Wang, University of Michigan
Ada Tsoi, Virginia Tech; John Hinch; Richard
Ruth, Ruth Consulting Inc; Hampton Gabler,
Virginia Tech
Scott D. Thomas, General Motors
Company; Richard A. Wiik, Takata;
Jacqueline E. Brown, General Motors
Company
Sangzhi Zhu, Lifu Wang, Nong Zhang, Univ.
of Technology Sydney; Haiping Du, Univ. of
Wollongong
Validation of the Age-specific Human FE
Models for Lateral Impact
Timing and Synchronization of the Event
Data Recorded by the Electronic Control
Modules of Commercial Motor Vehicles DDEC V
Simulation of Advanced Folded Airbags
with VPS‑PAMCRASH/FPM: Development
and Validation of Turbulent Flow Numerical
Simulation Techniques Applied to Curtain
Bag Deployments
Design of Hydraulically Interconnected
Suspension Systems for Tri-axle Straight
Trucks with Rear Tandem Axle Bogie
Suspensions
(2013-01-1242)
(2013-01-1267)
(2013-01-1158)
(2013-01-1237)
Yasuhiro Dokko, Toshiyuki Yanaoka, Honda
R&D Co.,Ltd.; Kazuki Ohashi, PSG Co.,
Ltd.
David Plant, D P Plant & Associates;
Timothy Cheek, DELTA [v] Forensic
Engineering; Timothy P. Austin, Wisconsin
State Patrol; John C. Steiner, KEVA
Engineering; Michael Farrell, Fox Valley
Technical College; Heath Spivey, DELTA [v]
Forensic Engineering
Alain Tramecon, ESI Group; Joerg Kuhnert
PhD, Fraunhofer ITWM
Fei Ding, Xu Han, Xuhui Mo, Nong Zhang,
Hunan Univ.
Statistical Considerations for Evaluating
Biofidelity, Repeatability, and Reproducibility
of ATDs
The Accuracy and Sensitivity of Select 2005
to 2013 Toyota Event Data Recorders in
Low-Speed Barrier and Vehicle Collisions
(2013-01-1249)
(2013-01-1268)
Guy S. Nusholtz, Zine Aoun, Laura Di
Domenico, Timothy Hsu, Manuel A.
Gracián, Jesús A. Prado, Chrysler Group
LLC
Craig Wilkinson, Jonathan Lawrence, Tim
Nelson, James Bowler, MEA Forensic
Engineers & Scientists
SAFETY/TESTING
SAFETY/TESTING
TIME
D3-22
Biomechanics (B401)
D3-28
Occupant Protection: Event Data
Recorders (EDR) (B402)
D3-18
Occupant Protection: Occupant
Restraints (Air Bags, Seat Belts,
Knee Bolsters, Child Seats, etc.)
(B403)
This session includes the latest research
on Event Data Recorders (EDRs) equipped
in passenger cars, light trucks, and
commercial vehicles (heavy trucks and
motorcoaches). Emphasis is placed on the
application, interpretation and use of EDRs
in the investigation of motor vehicle crashes.
D3-20
Technology Symposium (AC300)
The purpose of this session is to provide
a forum for presentations on steering and
suspension related topics as it applies to
ground vehicles. Papers for this session
should address new approaches as well
as advances in application of steering,
suspension related technologies.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 10:00 a.m.
8:00 a.m. - 9:40 a.m.
8:00 a.m. - 9:40 a.m.
Organizers:
Elizabeth Mary Fievisohn, Virginia Tech.;
Jacob L. Fisher, Exponent Inc.; Warren
N. Hardy, Virginia Tech.; David Raymond,
California State University - LA
Organizers:
John C. Steiner, KEVA Engineering; Timothy
Cheek, DELTA [v] Forensic Engineering;
Brian J. Everest, General Motors LLC;
Heath Spivey, Delta V Forensic Engrg
Organizers:
Aditya Belwadi, Childrens Hospital of
Philadelphia; Lisa Fallon, Scott D. Thomas,
General Motors LLC; Chris A. Van Ee,
Design Research Engineering
Organizers:
Robert Ackley, Ford Motor Co.; Prashant
Patel, Chrysler Group LLC
Frontal Crash Protection Performance of
Integrated Child Safety Seat (Written Only
A Control Algorithm for Electric Power
Steering of Blow-out Tire Vehicle
to Reduce the Impact Torque on Steering
Wheel
(2013-01-1160)
(2013-01-1239)
Libo Cao, Ruifeng Zhang, Hunan University;
Huiqin Chen, Hangzhou Dianzi University;
Xianyang Zhao, Lizhong Automobile
Shaosong Li, Changfu Zong, Guoying
Chen, Lei He, Jilin Univ.
Integrated Active and Passive Systems for
a Side Impact Scenario (Written Only -- No
Oral Presentation)
Fatigue Life Calculation of an Automotive
Shock Absorber Shim Assembly Using
Different Simulation Techniques
(2013-01-1162)
(2013-01-1240)
Mauro Velardocchia, Politecnico di Torino;
Michiel Unger, TASS Germany; Alessandro
Vigliani, Politecnico di Torino; Nicola Leone,
Kajetan Kietlinski, TASS Germany; Enrico
Galvagno, Politecnico di Torino
Swapnil Kulkarni, Muragendra Magdum,
Ravi B, Gabriel India Ltd.
Planned by Steering and Suspension
Committee / Automobile Chassis Activity
10:01
p.m.
10:02
p.m.
Planned by Occupant Protection Committee Planned by Occupant Protection Committee
174
SAFETY/TESTING
TIME
D3-24/25
7): Fundamental Aerodynamics
(B500)
D3-17
D3-24/25
7): Test Facilities (B500)
8:00 a.m. - 9:00 a.m.
8:00 a.m. - 11:00 a.m.
9:20 a.m. - 10:10 a.m.
Organizers:
E. Gleason, Chrysler Group LLC; Taeyoung
Han, GM
Organizers:
Safety Admin; Paul Grygier; Mark Heitz,
Ohio Northern University; Mohamed Kamel
Salaani, Transportation Research Center
Inc.; Amandeep Singh, US Army TARDEC
Organizers:
Edward G. Duell, Jacobs Technology Inc.;
E. Gleason, Chrysler Group LLC
Chairpersons:
Paul Grygier; Mark Heitz, Transportation
8:00
a.m.
8:20
a.m.
8:40
a.m.
9:00
a.m.
Aerodynamic Drag Reduction on a Simple
Car-Like Shape with Rear Upper Body
Taper
Control Strategy for the Excitation of a
Complete Vehicle Test Rig with Terrain
Constraints
(2013-01-0462)
(2013-01-0671)
Jeff Howell, Tata Motors European Technical
Centre; Martin Passmore, Simon Tuplin,
Rafael Fietzek, TU Darmstadt; Philip Chin,
Virginia Polytechnic Inst & State Univ.;
Cannon Cheng, Purdue Univ.; Russell
LaBrie, Univ. of California; John Ferris,
Virginia Tech; Stephan Rinderknecht, TU
Darmstadt
The Impact of Underbody Roughness on
Rear Wake Structure of a Squareback
Vehicle
Development of an Integrated Control
Strategy Consisting of an Advanced Torque
Vectoring Controller and a Genetic Fuzzy
Active Steering Controller
(2013-01-0463)
(2013-01-0681)
Anna-Kristina Perry, Martin Passmore,
Kiumars Jalali, Univ. of Waterloo; Thomas
Uchida, Stanford Univ.; John McPhee,
Steve Lambert, Univ. of Waterloo
Experimental and Numerical Investigations
of the Base Wake on an SUV
Instantaneous Estimation of Road Friction
based on Front Tire SAT using Kalman Filter
(2013-01-0464)
(2013-01-0680)
Lennert Sterken, Chalmers University of
Technology; Simone Sebben, Tim Walker,
Volvo Car Corporation; Lennart Lofdahl,
Chalmers University of Technology
Takuro Matsuda, Shin-ichiro Jo, Hikaru
Nishira, Yoshitaka Deguchi, Nissan Motor
Co., Ltd.
Optimal Tire Force Allocation by Means of
Smart Tire Technology
(2013-01-0694)
Mustafa Ali Arat; Kanwar Singh; Saied
Taheri
9:20
a.m.
9:40
a.m.
Application of Electric Servo Brake System
to Plug-In Hybrid Vehicle
Design of Helmholtz Resonators for Open
Jet Wind Tunnels
(2013-01-0697)
(2013-01-1349)
Naoto Ohkubo, Satoshi Matsushita,
Masayuki Ueno, Kohei Akamine, Kunimichi
Hatano, Honda R&D Co., Ltd.
Amir Kharazi, Edward G. Duell, Joel Walter,
Jacobs
Mobility and Energy Efficiency Analysis of a
Terrain Truck
Validation of Blockage and Pressure
Gradient Correction Methods in 3/4-Open
Jet Wind Tunnels
(2013-01-0672)
(Oral Only)
Vladimir V. Vantsevich, Univ. of Alabama;
Dennis Murphy, TRW Automotive;
Gianantonio Bortolin, Volvo Construction
Equipment AB
Mark Gleason, Todd Lounsberry, Chrysler
Group LLC; Joel Walter, Jacobs; William
Pien, Ford Motor Co
SAFETY/TESTING
TIME
D3-24/25
7): Fundamental Aerodynamics
(B500)
D3-17
D3-24/25
7): Test Facilities (B500)
8:00 a.m. - 9:00 a.m.
8:00 a.m. - 11:00 a.m.
9:20 a.m. - 10:10 a.m.
Organizers:
E. Gleason, Chrysler Group LLC; Taeyoung
Han, GM
Organizers:
Safety Admin; Paul Grygier; Mark Heitz,
Ohio Northern University; Mohamed Kamel
Salaani, Transportation Research Center
Inc.; Amandeep Singh, US Army TARDEC
Organizers:
Edward G. Duell, Jacobs Technology Inc.;
E. Gleason, Chrysler Group LLC
Chairpersons:
Paul Grygier; Mark Heitz, Transportation
10:00
a.m.
Cascaded Dual Extended Kalman Filter for
Combined Vehicle State Estimation and
Parameter Identification
Test Process and Correction of Automotive
Wind Tunnel in Jilin University China
(2013-01-0691)
(2013-01-1351)
Ayyoub Rezaeian, Reza Zarringhalam, Univ.
of Waterloo; Saber Fallah, Univ. of Surrey;
William Melek, Amir Khajepour, Univ. of
Waterloo; Shih-Ken Chen, General Motors
Company; Baktiarr Litkouhi, General Motors
LLC
Yingchao Zhang, Zhe Zhang, Jie Li, Shuxin
Shao, Sai Guo, ASCL,Jilin University
10:20
a.m.
Progress in Aeroacoustic and Climatic Wind
Tunnels for Automotive Wind Noise and
Acoustic Testing
(2013-01-1352)
Edward G. Duell, Joel Walter, Joseph Yen,
Tony Nagle, Jacobs
10:01
p.m.
Using Performance Margin and Dynamic
Simulation for Location Aware Adaptation of
Vehicle Dynamics (Written Only -- No Oral
Presentation)
(2013-01-0703)
Cullen C. Matthews, Sukhwan Cho, John
Ferris, Virginia Tech; Joerg Schlinkheider,
Matthew Montgomery, Volkswagen Group
of America, Inc.
10:02
p.m.
Development of Analytical Models for the
Identification of Dynamic Parameters in a
Double Wishbone Front Suspension (Written
(2013-01-0709)
Luz Adriana Mejía, Universidad Tecnológica
de Pereira; Francisco Valero, Vicente Mata,
Universidad Politécnica de Valencia
10:03
p.m.
Non-Linear Full-Car Modeling and SkyHook Control for a Direct-Drive Active
Suspension System (Written Only -- No Oral
Presentation)
(2013-01-0713)
Dave van Casteren, Bart Gysen, John
Kessels, Johan Paulides, Paul van den
Bosch, Elena Lomonova, Eindhoven
176
TIME
ALL WRITTEN ONLY
Primary Ride - Written Only (AC302)
D3-17
Vehicle Dynamics, Stability and Control (Part 4 of 4) (AC500)
This session is focused on vehicle dynamics and controls using modeling
and simulation, and experimental analysis of passenger cars, heavy
trucks, and wheeled military vehicles. This session addresses active and
passive safety systems to mitigate rollover, yaw instability and braking
issues; driving simulators and hardware-in-the-loop systems; suspension
kinematics and compliance, steering dynamics, advanced active
suspension technologies; and tire force and moment mechanics.
Organizers:
Pinhas Barak, Kettering Univ.; Richard Dale Tonda, SEA, Ltd.
1:00 p.m. - 3:20 p.m.
Organizers:
W. Riley Garrott, National Hwy Traffic Safety Admin; Paul Grygier; Mark
Heitz, Transportation Research Center Inc.; Gary J. Heydinger, SEA, Ltd.;
David R. Mikesell, Ohio Northern University; Mohamed Kamel Salaani,
Transportation Research Center Inc.; Amandeep Singh, US Army TARDEC
Chairpersons:
Mark Heitz, Transportation Research Center Inc.; Paul Grygier
1:00
p.m.
A Gain-Scheduled PID Controller for Automatic Path Following of a
Tractor Semi-Trailer
(2013-01-0687)
Nenggen Ding, Yipeng Zhang, Feng Gao, Guoyan Xu, Beihang University
1:20
p.m.
Development of an Advanced Fuzzy Active Steering Controller and a
Novel Method to Tune the Fuzzy Controller
(2013-01-0688)
Kiumars Jalali, Thomas Uchida, John McPhee, Steve Lambert, Univ. of
Waterloo
1:40
p.m.
Development of an advanced Torque Vectoring Control System for an
Electric Vehicle with In-wheel Motors using Soft Computing Techniques
(2013-01-0698)
Kiumars Jalali, Thomas Uchida, Steve Lambert, John McPhee, Univ. of
Waterloo
2:00
p.m.
An Inertial Sensing Based System for Lane Curvature Estimation
(2013-01-0689)
Shun-Hung Chen, Chan Wei Hsu, Kai Yu, Automotive Research & Testing
Center
2:20
p.m.
Active Kinematics Suspension for a High Performance Sports Car
(2013-01-0684)
Isabel Ramirez Ruiz, Ferrari Spa
2:40
p.m.
The Design of a Suspension Parameter Identification Device and
Evaluation Rig (SPIDER) for Military Vehicles
(2013-01-0696)
Timothy Wagner, The Ohio State University; Dale Andreatta, Gary J.
Heydinger, Anmol Sidhu, Ronald Bixel, SEA, Ltd.; Dennis Guenther, The
Ohio State University
3:00
p.m.
Advanced Control Strategies for a Roll Simulator - A Feedback
Linearization Technique Explored
(2013-01-0683)
Scott Zagorski, Dennis A. Guenther, Gary J. Heydinger, Ohio State Univ.
10:01
p.m.
10:02
p.m.
10:03
p.m.
Ride Comfort Optimization of Electric Wheel Dump Truck Based
on a Vehicle Test (Written Only -- No Oral Presentation)
Use of DFSS Principles to Develop an Objective Method to Assess
Transient Vehicle Dynamics (Written Only -- No Oral Presentation)
(2013-01-1354)
(2013-01-0708)
Wenguang Wu, Zhengqi Gu, Hunan Univ.
Ibrahim A. Badiru, Michael W. Neal, General Motors Company
Customer Focus in Ride Development (Written Only -- No Oral
Presentation)
Coordination of Steer Angles, Tyre Inflation Pressure, Brake and
Drive Torques for Vehicle Dynamics Control (Written Only -- No Oral
Presentation)
(2013-01-1355)
(2013-01-0712)
Ibrahim Badiru, W. Bradley Cwycyshyn, General Motors Company
Barys Shyrokau, Danwei Wang, Nanyang Technological University
A Computational Method for Efficient Hub Offset Evaluations
with Deflected-Disc Dampers
Improving Understeering Behaviour of a Passenger Car via Rear Axle
Bushing Optimisation (Written Only -- No Oral Presentation)
(2013-01-1357)
(2013-01-0700)
W. Bradley Cwycyshyn, Joseph Fedullo, General Motors Company
Mohsen Bayani Khaknejad, Ahmad Khalaj, Arash Keshavarz, Asghar
Mirabdollahi, R&D Centre of SAIPA
10:04
p.m.
Experimental Comparison of Anti-roll Bar with Hydraulically Interconnected
Suspension in Articulation Mode
(2013-01-0710)
Lifu Wang, Guangzhong Xu, Nong Zhang, Holger Roser, Univ. of
Technology Sydney
Planned by Steering and Suspension Committee / Automobile
Chassis Activity; Vehicle Dynamics Committee / Automobile
Chassis Activity
Planned by the Vehicle Dynamics Committee / Automobile Chassis Activity
The papers in this session are available in SAE Technical Paper Collection,
COLL-TP-00318, and also individually. To purchase visit collections.sae.org
SAFETY/TESTING
SAFETY/TESTING
safety/testing
EXHIBITOR LIST
ADM21 Co Ltd....................................1133
Applus IDIADA.....................................1019
ERGONEERS......................................1138
Intertek..................................................507
JG&A Metrology Center.........................319
Kyowa Americas Inc..............................439
NAFEMS..........................................M1325
Namyang Ind. Co. Ltd.........................1324
Proto Labs..........................................1036
Co Ltd................................................437
SL Corp..............................................1330
US Dept of Transportation.....................337
Wontae Die Casting Co Ltd.................1131
DEVELOPED BY INDUSTRY, FOR INDUSTRY
SAE Credentialing Central
Elevate your knowledge,
escalate your career.
Through SAE Credentialing
Central, individuals are able
to earn SAE Certification by
successfully passing industryvetted exams, derived from
industry-generated bodies of
knowledge. Additionally, certain
programs that provide training
followed by an industry-vetted
exam provide the opportunity
to earn an SAE Certificate of
Competency.
Now enrolling for Vehicle
Electrification (VE)
Certificate of Competency
and Design Review Based
on Failure Modes (DRBFM)
Certificate of Competency.
TO REGISTER TODAY,
visit sae.org/training/credentialing/
178
The SAE Technology Center at World Congress
An interactive hands-on forum to learn about new SAE products
and services that are critical to a more effective workflow.
The SAE Technology Center will include:
• SAE’sOn-SiteBookstore-FeaturingNewand
Best-SellingTitles
Special 20% off On-Site Show Discount!*
•BrowseSAE’sonlinebookstoreofmusthave,market-leadingpublications!
Order online - ship books directly to your
office, home or organization!
• Demonstrationsofexcitingnewproduct
solutions!
•Hands-onlookatSAE’snewestproducts
including:
• Award-winningSAEglobalmagazines
• TheGlobalTechnologyLibrary–Electric
Vehicle
• ThenewGlobalTechnologyLibrary–
AlternativeFuels
• CheckoutSAE’snewMyLibrarymobileapp!
•Provideseasyaccesstoindividually
purchaseddocumentsviaamobile
application
• Registertowingreatprizes!
• GetreadytoTweet,FacebookandInstaGram
withusattheallnewSAETechnologyCenter!
As a global leader in publishing, SAE is
excited to share information on topics,
trends and tools shaping the mobility
industry, today!
*Discountislimitedtonew&bestsellingtitles,instockon-siteduring
Congress.Purchasemustbemadeon-site.On-sitequantitiesarelimited,
whilesupplieslast.Nootherdiscountsapply.
Visit the SAE Technology Center during World Congress –
located near Registration!
P135211
participant index
A
Abanteriba,Sylvester.............64
Abarham,Mehdi....................71
Abbasi,Payman..................140
Abdallah,Sayed A...............107
Abdelli,Abdenour................145
Abdel-Salam,Tarek M...............
138, 145, 147, 154
Abdul-Hak,Mohamad...........51
AbdulNour,Bashar......... 69, 73
Abed,Ghassan....................108
Abei,Jyun.............................72
Abe,Makoto........................152
Abe,Motoyuki.....................139
Abe,Shizuo.........................145
Abe,Takeshi..........................84
Abi-Akar,Hind.......................60
Abidin,Zainal.........................73
Abidou,Diaa........................168
Abousleiman,Rami..... 138, 149
Abouzahr,Saad.....................96
Abraham,Mathew...............140
Abraham,Preeti...................118
Abu-Farha,Fadi............ 97, 106
Ackley,Robert.....................173
Acton,David..........................48
Adachi,Masayuki..................67
Adam,Frank..........................69
Adams,Cory.......................154
Adcock,Paul.......................123
Adelman,Brad............... 63, 66
Adhikary,Bishwadipa Das.........
125, 136
Adhitya,Mohammad...........149
Adiga,Ganesh N.................122
Adler,Nico.............................45
Adler,Rasmus.......................44
Adomeit,Philipp...125, 126, 139
Agarwal,Avinash Kumar............
70, 130, 149, 156
Agarwal,Ramesh K...................
73, 134, 169
Agashe,Pushkar...................45
Agrawal,Komal.....................55
Agrawal,Surendra...............101
Ahamed,Naveed.................109
Ahmed,Ryan......................139
Ahmed,Sabir........................54
Ahn,Hyunmin........................61
Ahrens,Marty......................161
Aithal,Shashi.......................140
Aizawa,Tetsuya...................125
Ajima,Toshiyuki.....................50
Akaishi,Nobuyuki................135
Akalin,Ozgen............. 107, 110
Akamine,Kohei...................175
Akca,Serdar.........................67
Akehurst,Sam............ 131, 145
Akihama,Kazuhiro...............125
Akita,Masanobu...................67
Akritidis,Theofilaktos.............59
Alajbegovic,Ales...... 59, 63, 68
Alamir,Malok.........................51
Alasty,Aria...........................143
Albrecht,Bogdan................133
Alcini,William.........................63
Aldawood,Ali......................155
Alexander,Kim...48, 54, 163, 91
Alger,Terrence...........................
142, 150, 156, 157
Al-Hakeem,Mohannad..........72
Alholou,Nizar........................51
Ali,Mohammed Yusuf..........101
Ali,Rustam..........................104
Ali,Usman...........................124
Alkadi,Nasr...........................66
Allen,Matthew.....................134
Allenström,Björn...................59
Alley,R. Jesse.....................116
Alley,Robert Jesse..... 116, 123
Allison,Jamie......................172
Allison,John........................104
Allocca,Luigi.......................118
180
Al-Refai,Abdullah................138
Alsuwaiyan,Abdullah.............74
Altenhof,William J.....................
81, 83, 84, 101, 104
Altenschmidt,Frank.............119
Altobelli,John......................104
Aluru,Kiranmaye.................134
Alvarenga,Lucymara De
Resende.........................156
Alwerfalli,Daw.......................53
Aly,Mohamed F...................148
Amagai,Ryuichi...................152
Amanatidis,Stavros........ 66, 69
Amano,Masato.....................60
Amaral,Ricardo.....................69
Amari,Akio............................62
Amer,Amer................ 126, 155
Amer,Saed T.......................163
Amori,Richard.......................80
Anand,Beena........................85
Anand,Ravi...........................85
Anantharam,Raghavendra....54
Anastasakos,Antonios........131
Anastopoulos,George.........131
An,Byeongil........................130
Anderson,Dave.....................44
Anderson,David......... 109, 130
Anderson,David W..... 101, 103
Anderson,Eric K..........116,156
Anderson,James E.... 150, 151
Anderson,Robert................123
Andersson,Anders................97
Andersson,Jon.......... 118, 119
Andersson,Oivind.. 118, 125, 138
Andersson,Per....................118
Andersson,Sven...................60
Ando,Hiromitsu.......... 132, 147
Ando,Kenichi......................171
Ando,Yuya................. 101, 102
Andrade,Rodrigo Viegas.....156
Andreatta,Dale....................177
Andres,Peter......................150
Andrews,Gordon E...... 75, 131
Andrie,Michael J........ 138, 154
Andrus,John D...................168
Anekawa,Akihiro.................145
Angstrom,Hans-Erik.................
120, 126, 135
An,Hui..................................68
An,Tae Hyun.........................64
Antunes,Nuno......................61
Aoki,Takashi.........................63
Aoki,Toshihiko....................150
Aoun,Zine...........................173
Aoyagi,Satoshi......................60
Aoyagi,Yuzo............... 119, 154
Aparicio,Andrés..................165
Apfelbeck,Robert..................59
Arabi,Samaneh.....................84
Arai,Hidenori.......................111
Arai,Soichiro.........................48
Aramburu,Enric..................162
Araneo,Lucio......................118
Arasaratnam,Ienkaran.........139
Arat,Mustafa Ali..................175
Aristizabal,Ricardo..............103
Ariztegui,J..........................136
Armstrong,Cecil....................66
Armstrong,Christopher D.......... 165, 170
Arnau,Francisco.................120
Arnault,Nicolas...................154
Arnett,Clay.........................140
Arora,Kunal........................120
Arsdell,William Van.............173
Arsie,Ivan............................142
Arslan,Selin...........................53
Arthurs,Kirk........................101
Arunkumar..........................110
Arzner,Matthias...................142
Asa-Awuku,Akua................123
Asad,Usman.......................133
Asano,Seiji..........................143
Ash,Lloyd...........................145
Asl,Hadi Adibi.....................132
Assanis,Dennis............ 66, 151
Assanis,Dennis N.................71
Asthana,Siddhartha............118
Astorga-Ilorens,Covadonga.. 60
Athani,Gopal.......................148
Athari,Abtin.........................168
Atsumi,Masakazu...............107
Attalla,Shady......................170
Attard,William P......................... 116, 123, 130, 156
Attibele,Pradeep...................79
Augenbroe,Godfried.............65
Auken,R. Michael Van.........172
Ault,B. Nicholas..................169
Auner,David........................170
Austin,Timothy P.................173
Aust,Mikael Ljung...............163
Aute,Vikrant................... 68, 85
Avadhanula,Vamshi K.........154
Avan,Emin Yusuf.................116
Avery,Katherine...................100
Awakawa,Hirobumi.............152
Awane,Kazutoshi................152
Awan,Muhammad Adeel......97
Axe,Bryan.............................63
Axelson,Anders..................172
Aye,Andreas.......................125
Ayeb,Mohamed............. 43, 43
Ayyappan,Ponnaiyan............71
Ayyapureddi,Sridhar...........133
Azadi,Shahram...................171
Azimi,Reza.........................166
Azizi,Yousof........................103
Azrulhisham,Engku A............79
Azuma,Machiko....................62
B
Baasch,Detlef.....................150
Babajimopoulos,Aristotelis..151
Babu,Y Ramachandra........140
Bachhuber,Matthias............149
Bacho,Paul Von..................125
Badarayani,Sachin................63
Badawy,Tamer....................125
Badgley,Jennifer M.............163
Badiru,Ibrahim....................177
Badiru,Ibrahim A.................177
Bae,Choongsik...................126
Baecker,Manfred................104
Baer,Patrick H....................172
Bahrami,Majid......................69
Baibikov,Vladimir..................75
Bai,Ling................................60
Baird,Benjamin...................142
Bair,Raymond.....................140
Bajaj,Anil.............................103
Baker,Mark.........................119
Bakker,P.C..........................154
Bakri,Zul Ashraf..................147
Bakshi,Shamit....................122
Balaji,B.............. 63, 71, 72, 73
Balakrishnan,Praveen Balaj.......
84,109
Balazs,Andreas...................140
Balestrino,Sandro.......... 60, 61
Ball,Cedric A............. 108, 110
Ball,Douglas.........................69
Ballinger,Todd.......................60
Baltrucki,Justin...................156
Bandi,Punit.........................102
Bandivadekar,Anup....... 59, 61
Bandlamudi,Lakshmi............55
Banerjee,Prashant Kumar.....74
Bang,Sunghoon...................63
Ban,Hyung Oh....................122
Bansal,Jai...........................119
Bansal,Sweta.....................101
Bao,Ran.............................152
Barak,Pinhas......................177
Baranski,Jacob...................116
Baratta,Mirko......................134
Barbat,Saeed...........................
101, 101, 168, 172
Barber,Gary............... 103, 108
Barbosa,Celso Antonio.......106
Bardasz,Ewa Alice..............118
Bardetti,Anna.....................111
Bardi,Michele......................154
Bare,Cleve..........................166
Bargende,Michael...... 127, 140
Barickman,Frank................169
Bari,Saiful.................... 68, 154
Barkai,Joseph J...................50
Barnes,Graham..................101
Barnes,Simon.....................116
Barone,Teresa......................71
Baron,Jay...........................100
Barré,Anthony....................110
Barros,Sam........................125
Barshinger,Daniel................165
Barter,Garrett E....................65
Barthel,Frank........................59
Barths,Hardo............................
120, 127, 132, 140
Bartlett,Wade D..................165
Barton,William....................119
Baseski,Igor................... 81, 85
Bassett,Michael..................145
Battistoni,Michele...............140
Bauch,David.......................101
Bauer,Jeremy J..................170
Bauerle,Peter........................96
Baumann,Frank..................165
Baumgard,Kirby...................63
Baumgart,Andreas...............45
Baumgarten,Uwe.................46
Bayan,Fawzi P.... 166, 167 171
Bayar,Kerem.......................138
Bayerl,Frank.......................110
Bayne,Stephen...................124
Bazzi,Youssef.......................51
Beatrice,Carlo............ 154, 154
Beattie,Tim.........................142
Beauchamp,Gray...............165
Becci,Graciela......................53
Becker,Bernd.....................147
Becker,Michael.....................61
Becker,Steven........... 161, 165
Bedsworth,Kevin................166
Beeck,Joël Op de.................66
Befrui,Bizhan......................125
Behroozi,Mohammad...........84
Beigmoradi,Sajjad....... 98, 149
Bekdemir,Cemil..................133
Belanger,Brian......................63
Belassel,Mohammed............96
Belhocine,Ali.........................64
Bell,Donna..................... 45, 65
Bellenoue,Marc...................142
Bellis,Vincenzo De..............136
Bell,Keith..............................79
Belloncle,Guillaume..............84
Belt,Bryan Whitney.............116
Belwadi,Aditya....................173
Belwafa,Jamel E........ 168, 172
Benajes,Jesus........... 154, 155
Benda,Vincent......................45
Benedikt,Martin....................50
Benlamine,Raouf................145
Bennur,Mallikarjuna...79, 81, 84
Benoy,Brian............... 116, 123
Benrabah,Zohir.... 81, 111, 111
Benz,Andreas.....................121
Beresnev,Alex.....................117
Beresnev,Max.....................117
Bergenhem,Carl...................44
Bergès,Damien...................100
Bergmann,Alexander..... 69, 70
Berg,Roger...........................55
Bernard,J.D........................106
Berndorfer,Axel...................125
Bernsteiner,Stefan..............165
Berr,Fabrice Le...................145
Berrocal,Edouard................138
Best,Scott..........................165
Betanzo-Quezada,Eduardo...170
Beyer,Charles.......................80
Bezzina,Charles....................59
Bhagat,Meghraj......... 124, 125
Bhanot,Viren.........................64
Bhardwaj,Om Parkash...70, 146
Bhatia,Gaurav.....................166
Bhave,Amit.........................124
Bhosale,Suresh..................104
Bhuyan,Deepak..................109
Bhuyan,Deepak Ranjan......109
Bianchi,Gian Marco............145
Bian,Feng...........................118
Bicker,Robert........................48
Bidarvatan,Mehran.............148
Bielaczyc,Piotr............. 71, 152
Bieneman,Jason.................142
Biermann,Jan-Welm...........173
Bika,Anil Singh.............. 60, 61
Billal,Mohammed......... 96, 110
Binder,Emanuel..................121
Binder,Scott William............120
Binner,Jon G.P......................60
Birat,Jean-Pierre L................69
Bircann,Raul.......................134
Bird,Norman J....................122
Biss,David..........................163
Bittle,Joshua A...................132
Bixel,Ronald.......................177
Bi,Xiaojie.............................141
Bizet,Charles........................64
Black,Greg.........................131
Black,Marilyn........................66
Blakeman,Phil.......................60
Blanco,Juan.................. 81, 82
Blasio,Gabriele Di...... 154, 154
Blythe,William.....................165
Bobba,Somasekhar............107
Bocci,Daniel.......................124
Bockstette,Jens.................152
Bodisco,T.A........................145
Boehler,Jeff.........................157
Boehman,Andre.................135
Boehmer,Marius.................118
Boehme,Thomas Juergen........
138, 147, 148
Boer,Chris De.....................118
Bogensperger,Michael........127
Boger,Thorsten.....................63
Bohac,Stani..........................66
Bohan,Stephen....................61
Bohne,Steffen.....................157
Bolander,Al.........................170
Bolarinwa,Emmanuel.104, 105
Boldt,Alexander..................147
Bolla,Michele......................146
Bolon,Kevin........................102
Bolt,Louis Scott....................49
Bolton,Jim..........................163
Bonar,Gary.........................118
Bonitz,Sabine.....................168
Bonnen,John J.....................97
Booth,Neall...........................66
Boot,M.D..............................61
Borgqvist,Patrick................136
Börjesson,Lucas.................165
Born,Marc............................48
Boroomand,Masoud...........139
Borroni-Bird,Christopher
Eric.................................152
Bortles,William....................170
Bortolin,Gianantonio...........175
Bosch,Paul van den...........176
Bosley,Al...............................89
Boston,Daniel.......................65
Bota,Jun.............................157
Böttcher,Lars......................121
Bottelli,Stefano...................143
Bouffaud,F..........................131
Boulouchos,Konstantinos...146
Boundy,Timothy.................101
Bourhis,Guillaume..............126
Boust,Bastien.....................142
Bowers,Randy J...................96
Bowlby,Ben............... 165, 172
Bowler,James.....................173
Bowyer,Stephen........ 106, 139
Boyer,Brad A............. 140, 141
Bozeman,Jeffrey............ 69, 73
Bozza,Fabio.......................136
Brabetz,Ludwig............. 43, 43
Brace,Chris........................131
Brace,Christian...................145
Bracker,Joerg.....................138
Bracklo,Claas.......................54
Bradburn,John J..................63
Bradley,Conor.....................134
Bradley,Thomas..................123
Brahma,Indranil..................157
Brakora,Jessica..................133
Branagan,Daniel James......101
Brand,Jonathan..................134
Brands,T.............................157
Brandt,Jonas......................161
Bras,Bert..............................65
Brauss,Michael.....................96
Bravo,Yolanda....................142
Brear,Michael J.... 65, 132, 140
Breen,Kevin........................166
Breitfuss,Christoph.............135
Brelin-Fornari,Janet............164
Bremner,Paul......................102
Brendel,Frederick F.............134
Brendle,Bernhard.................45
Brennan,Drew D.................162
Breuer,Stephan...................125
Brewerton,Simon P....47, 50, 51
Brezny,Rasto........... 60, 61, 69
Briggs,Michael L.................120
Briggs,Thomas Edward............
147, 154
Brijesh,P.............................123
Brito,F. P...............................61
Britto,Vijay Antony John.......98
Broatch,Alberto..................155
Broberg,Thomas................172
Brockmeyer,Udo...................45
Brodie,Bradley......................72
Brol,Sebastian....................110
Bromham,Jim.......................60
Brooke,Lindsay.....................96
Brooker,Aaron David.... 97, 152
Brooks,David........................73
Brookshear,D. William...........60
Brooks,Johnell....................163
Brooks,Timothy..................170
Broto-Puig,Francesc.............66
Brown,Adam......................156
Brown,Alan...........................46
Brown,Danny........................84
Brownell,Scott....................157
Brown,Gareth.....................119
Brown,Jacqueline E............173
Brown,R.J..........................145
Brudnak,Mark.....................138
Brumbelow,Matthew L.......164
Bruneaux,Gilles..................125
Brunel,Olivier........................55
Brunn,Andre.......................125
Brunner,Mario.....................150
Bruno,Rafael Antonio..........142
Brusiani,Federico................145
Brusstar,Matthew.. 118, 125, 151
Brynych,Pavel.....................138
Bucknell,John R.................141
Bueker,Ulrich........................65
Buitoni,Giacomo.................145
Büker,Matthias......................45
Bulcke,Arvid Van den.........150
Bullough,John D.................170
Burger,Robert.....................107
Burke,Richard.....................131
Burnham,Andrew.......... 69, 70
Burnham,Ross...................146
Burslem,Ben.......................123
Burton,Jonathan...................60
Bushkuhl,Jonathan...............66
Butcher,Cliff........................109
Butler,Brian...........................97
Butler,Robert......................166
Buttery,Ian..........................146
Butts,Christopher...............130
Butz,Robert........................147
Bybee,Michael....................129
Byczek,Richard..................150
Byrd,Alex............................101
C
Cackette,Thomas.................59
Cadena,Robert.....................44
Caffrey,Cheryl.....................102
Cai,Hao................................70
Cains,Tony................. 142, 145
Caiozzo,Joseph..................104
Cairns,Alasdair...................147
Cai,Wayne................................
134, 138, 150, 152, 153
Calendini,Pierre-Olivier..........64
Çalıçkan,Kemal...................107
Callea,Giuseppe.................165
Calvo,Paulo Reynaldo..........84
Cambridge,Jason.................67
Cameron,Iain......................150
Camm,Kenneth....................60
Campbell,Bruce......... 170, 147
Campean,Loan Felician. 80, 81
Cannella,William........ 148, 154
Canova,Marcello........ 130, 138
Cantore,Giuseppe..............127
Cao,Dongpu.........................97
Cao,Lei...............................134
Cao,Libo........... 163, 173, 174
Capobianco,Massimo...........66
Capon,Geoff.......................131
Capra,Andrea.....................140
Carden,Phil.........................119
Carducci,Lee......................172
Carello,Massimiliana.............84
Carlson,Richard Barney..130,152
Carnahan,James................170
Carpenter,Daniel...................69
Carpenter,Nicholas J..........171
Carraro,Chiara......................66
Carr,Lee..............................163
Carter,Jarrod............. 161, 163
Carter,Neal R......................170
Carvallo,Adriana...................69
Castellano,Javier..................60
Casteren,Dave van.............176
Castillo,Felipe............ 121, 143
Castro,Natalia.....................164
Catapano,Francesco................
118, 134, 150
Caton,Jerald A...................132
Cavanaugh,Tim A.......... 48, 52
Cavataio,Giovanni.................60
Cavina,Nicolo............ 120, 134
Cavotta,Marilou..................125
Cedeño,Rebeca.................170
Cenker,Emre.......................125
Ceraolo,Massimo...... 134, 134
Cerofolini,Alberto................120
Cervenka,Libor...................138
Cesare,Matteo De....................
120, 130, 142, 148
Ceyhun,Vural........................85
Chae,Ki-Sang.......................50
Chakravarthy,Krishnan........167
Chalet,David...... 120, 121, 154
Chamaillard,Yann................139
Chambers,Zachariah..........123
Chambon,Paul.......... 147, 152
Chana,Kam........................140
Chandrupatla,Tirupathi R....104
Chaney,Larry........................60
Chaney,Lawrence.................68
Chang,Chenfang..................55
Chang,Junseok..................126
Chang,Tony........................109
Chang,Yin-Ping....................83
Chan,Tak W..........................61
Chapman,Elana..................132
Charbonnelle,François..........64
Charbonnel,Sylvain...............60
Charmasson,Sébastien......142
Chasapidis,Leonidas............59
Cha,Sung.................. 107, 110
Cha,Sung Chul...................107
Chaudhari,Anita....................60
Chaudhari,Manohar..............74
Chaudhari,Subodh........ 62, 67
Chauhan,Vandana..............101
Chaukulkar,Tejas.................107
Chauvin,Jonathan...............126
Cheek,Timothy...................173
Che,Judy....................... 44, 45
Cheli,Federico......................99
Chen,Bo...................... 45, 156
Chen,Chenyao...................134
Chen,Chien-An...................152
Chen,Chun Hsiung.............170
Chen,Fang..........................161
Chen,Gang.........................127
Cheng,Cannon...................175
Cheng,Jianchao...................98
Cheng,Louis.......................171
Cheng,See Yuan................164
Chen,Guofei.. 101, 104, 107, 110
Chen,Guoying....................174
Cheng,Wai K............. 130, 148
Cheng,Way Lee..................141
Chen,Hai-Ying......................60
Chen,Hanyu.............. 122, 153
Chen,Huiqin.......................174
Chen,James.........................97
Chen,Jian.................. 100, 153
Chen,Jianghong.................112
Chen,Jieshi.........................109
Chen,Judy............................44
Chen,Jyh-Shin....................135
Chen,Kuo-Huey....................63
Chen,Lifeng........................137
Chennakrishnan,Muralidharan.. 110
Chen,Qian..........................162
Chen,Shih-Ken.... 49, 168, 176
Chen,Shuming....................147
Chen,Shun-Hung...............177
Chen,Tao............................148
Chen,Wei..................... 85, 156
Chen,Xi...............................106
Chen,Xiaoming.......... 109, 112
Chen,Xu...60, 66, 112, 128, 112
Chen,Ya-Lun......................145
Chen,Yang............................53
Chen,Yi-Hsin......................134
Chen,Yong-Ching...............116
Chen,Yu.............. 69, 122, 153
Chen,Yulin..........................125
Chen,Zhiyong.....................129
Cheon,Seyoung..................147
Cherry,Jeff................... 46, 134
Chesse,Pascal... 120, 121, 154
Chiatti,Giancarlo.................146
Chiesura,Claudio..................60
Chinchwadkar,Ajinkya...........53
Chin,Philip..........................175
Chinta,Balakrishna................85
Chippa,Sunil Kumar..............54
Chiriac,Constantin..............101
Chiroiu,Veturia....................163
Chisaki,Junji.......................123
Chi,Yohan...........................150
Chladny,Ryan.....................157
Choe,Chang Yul...................47
Cho,Gyubaek.......................64
Cho,Hyeonsu.....................145
Choi,Chi-Hoon...................108
Choi,Dae............................150
Choi,Dong-Jae...................106
Choi,Hoimyung.......... 123, 132
Choi,Jaewoong..................166
Choi,Kyoo Sil......................104
Choi,Kyung K.......................85
Choi,Seibum.......................142
Choi,Seungmok....................61
Choi,Soomin.........................98
Choi,Young................ 134, 150
Cho,Jeong-Min...................108
Cho,Jiho...............................63
Cho,Nam Hyo........... 118, 146
Cho,Sukhwan.....................176
Cho,Sung Hwan.................132
Choucair,Hassan..................53
Chou,Clifford......................163
Chou,Clifford C.......... 161, 163
Choudhury,Amit............. 47, 53
Chovan,Caleb P..................112
Chowdhury,A......................123
Chown,Bill............................47
Chretien,Louis......................43
Christel,Frieder Martin..........64
Christian,Donald J................43
Christopher,John J.............167
Christophersen,Jon P.........139
Chuang,Ching-Hung.............85
Chun,Jong Ik........................63
Chun,Yong.........................110
Ciaravino,Claudio...............145
Ciatti,Stephen............ 125, 136
Cicalese,Giuseppe..... 132, 140
Cieslar,Dariusz............. 67, 131
Cinnasamy,Jaishankar..........53
Cipek,Mihael.......................139
Cipriani,Alfred.....................171
Cirera-Domènech,Elisenda...66
Ciuca,Christopher M............91
Civera,Fulvio.........................79
Clark,Andrew D....................96
Clark,Deborah......................60
Clarke,Andrew....................127
Clarke,John........................142
Clark,Lance................. 48, 163
Clauberg,Jan......................141
Cleary,David.......................120
Cledat,Guillaume................107
Cleve,Daniel Van.................151
Cleveland,Christopher S.....129
Clifton,Scott.......................102
Cockle,Kirsty........................60
Coghe,Aldo........................118
Colborn,Jason....................169
Cole,Jon.............................123
Coleman,Clay.....................169
Colin,Guillaume..................139
Colin,Olivier........................132
Collao,Kevin.........................71
Collings,Nick............... 67, 131
Collings,Travis.....................150
Collins,John........................122
Collins,Lewis......................138
Colwell,Jeff D.....................161
Comstock,Robert J............109
Confer,Keith A........... 140, 148
Conran,Douglas.................132
Coogan,Timothy E..............135
Corberan,Jose............... 59, 68
Corcione,Felice Esposito....136
Cordes,Oliver........................51
Çoriç,Mirko.........................139
Cornelio,Thomas................106
Cornetto,Anthony... 166, 167, 171
Cornolti,Luca......................120
Corrigan,Dennis A..............151
Corrigan,Eric........................60
Corti,Enrico....... 120, 130, 134
Coryell,Jason......................101
Cosadia,Imran....................140
Costagliola,Maria Antonietta... 66
Costantino,Gregory............110
Costas,Miguel....................169
Covassin,Federico..............148
Cowart,Jim.................. 89, 116
Cox,Julian............................60
Cracknell,R.F......................136
Craig,Scott...........................45
Crain,Trevor............... 116, 124
Crandall,Jeff.......................163
Creff,Yann...................... 55, 75
Cricchio,Andrea..................142
Critchley,James..................103
Crombez,Dale....................138
Crompton,Matt J................112
Cronhjort,Andreas..............120
Crosty,Nathan.......................50
Cuenot,Philippe....................45
Cui,Chongzhen...................173
Cummings,Jill.....................132
Cundy,Michael E.................161
Cung,Khanh...... 124, 125, 156
Curran,Allen..........................68
Curran,Scott..60, 132, 145, 154
Currier,David T....................172
Currier,Neal.................... 60, 66
Curry,David.........................163
Curtis,Eric W...71, 30, 138, 152
Cushing,Timothy................132
Cwycyshyn,W. Bradley.......177
Cyrne,Luciano....................152
Czekala,Michael.................156
Czerny,Barbara J..................53
Czerwinski,Frank................103
Czerwinski,Jan.............. 60, 60
D
D'Adamo,Alessandro..........127
Dagci,Oguz H.......................46
Dahlander,Petter.................135
Dahlstrom,Jessica..............134
Daily,Jeremy.......................173
Dainty,David.......................161
Dakroub,Husein....................44
Dalmases,Carlos Arregui....161
D'Ambrosio,Joseph G..............
44, 44, 45, 48, 50, 53
D'Ambrosio,Stefano...........134
Damiani,Antonio.................124
D'Amico,Chris..... 79, 152, 163
Damm,Werner......................45
Damodaran,Vinay...............167
Danawade,Bharatesh.........108
Dan,Hiroyuki.........................60
Daniello,Allison...................166
Danielsson,Hakan...............168
Danjo,Takashi.......................72
D'Anna,Thomas..................142
Darlington,Alexander..........131
Dascalescu,Diana-Lucinia.........
140, 141
Dascalescu,
Spiridon-Cristian-Da..........72
Das,Kaushik.........................73
Das,Lalit.............................140
Das,Saurish........................149
Das,Sudhakar.. 118, 63, 125, 126
Das,Sujit........................ 59, 73
Dauer,Kenneth....................134
D'Auria,Massimo..................84
Dave,Dinesh N...................101
David,Guillaume....................72
Davies,Patricia....................103
Davila,Arturo.......................162
Davinder,Kumar..................140
Davis,Charles.......................63
Davis,Richard S........................
135, 142, 150, 156
Davoud,Sherwin.................130
Davy,Martin H............ 118, 152
Daw,C. Stuart.... 69, 72, 73, 74
Day,John..............................53
Deb,Anindya.............. 108, 163
Debouk,Rami................ 44, 53
December,Timothy S..........104
Decius,Nikolaus....................65
Decker,Leland.....................108
Defruyt,Sander...................139
Deguchi,Yoshitaka..............175
Dekelbaum,Robert...............50
181
participant index
Delahaye,Laurent................145
Delgado-Ortiz,Rosa..............66
Deligiannis,Alexandros........131
Delorme,Gilles......................70
Delsanto,Pier Paolo............163
DelVescovo,Dan.................132
Demarcq,Claire...................100
Dembinski,Henrik...............126
Dempsey,Adam B...132, 138, 155
Demuynck,Joachim............140
Denbratt,Ingemar...............118
Dence,Randy........................90
Deng,BangLin.............. 97, 139
Deng,Bing..........................161
Deng,Jun............. 63, 125, 154
Deng,Qiangquan................156
Deng,Yongqiang.................169
Denison,Gregory...................69
Dennis,Nate J.....................163
Dennis,Peter A............ 65, 140
Denomme,Glenn..................43
Depcik,Christopher..66, 68, 70, 72
Deregnaucourt,
Maxime-Vianney..............140
Derian,Gary........................165
D'Errico,Gianluca................120
Desai,Tejas...........................43
Desantes,Jose M...............147
Deter,Dean.........................147
Detwiler,Duane.......... 101, 102
Deur,Joško................ 134, 139
Devarakonda,Maruthi..71, 73, 74
Devine,Maryann..................119
Devlin,Mark........................118
Dev,Sathya.........................109
Deyerl,Eric..........................171
Dey,Tapash.........................110
Dhadyalla,Gunwant..............53
Dhakal,Bijay........................131
Dhar,Atul...............................70
Dhillon,Ranvir S..................104
Dhinagar,Samraj...................54
Diacon,Aaron......................173
Diakhaby,Sarah........................
120, 127, 132, 140
Dias,Andre............................53
Diaz,Jacobo.......................169
Dice,Paul............................156
Dicicco,Dominic....................67
Dick,Albert..........................151
Dickinson,Matthew W...........84
Dickinson,Paul............. 67, 131
Diez,Jeremy........................130
Digges,Kennerly.................173
Dillingham,Giles..................104
DiMarco,Patrick..................172
Dinesh....................... 101, 104
Dingelstadt,Rene................140
Ding,Fei..............................173
Ding,Nenggen............. 49, 177
Ding,Peiran.........................101
Ding,Yi.. 102, 134, 138, 150, 152
Disch,Christian...................119
Disch,Mario..........................63
Divekar,Prasad...................133
Dobson,Douglas...................60
Dodos,George S................131
Dodson,Bryan......................80
Dohmen,Jürgen..................140
Doig,Dwight........................116
Doi,Nobuyuki........................73
Doi,Tsutomu.......................171
Do,Jungseok........................79
Dokko,Yasuhiro..................173
Dolch,Johanna.....................67
Dolz,V.................................131
Dombrovskis,Sergejs..........163
Domenico,Laura Di.............173
Dominy,Robert....................164
Donateo,Teresa..................124
Donders,Stijn......................147
Dong,Guangyu...................136
Dong,Jian...........................117
182
Dong,Lihui............................69
Dong,Ming............................61
Dong,Zuomin......................147
Donnelly,Kieron...................118
Doppalapudi,Sudhakar.......108
Dou,Danan.................... 63, 66
Douglass,Bruce....................48
Dourra,Hussein.... 50, 127, 150
Drewelow,Wolfgang... 147, 156
Drignei,Dorin.........................85
Dronzkowski,David...............80
Druschitz,Alan....................103
Dryer,Frederick L................132
Du,Aimin.............................150
Duault,Frederic.....................55
Dube,Normand...................161
Dubois,T.............................136
Dubois,Vincent.....................64
Du,Changqing....................112
Duell,Edward G......... 175, 176
Duenow,Peter.....................156
Dugard,Luc............... 121, 143
Duggan,Marvin.. 130, 136, 146
Dugsin,Paul........................100
Du,Haiping.........................173
Dukhan,NIhad......................96
Dumbare,Prajeen................107
Dumitriu,Dan......................163
Dumnov,Gennady...............145
Duncan,Allen B.....................66
Duncan,Bradley..................164
Dunn,Ashley.............. 166, 167
Dunn,Jennifer B....................69
Duoba,Michael.........................
130, 131, 138, 145, 152
Duran,Amanda...................163
Duranceau,Claudia........ 59, 69
D'Urbano,Giovanni........ 60, 60
Durbin,Thomas.. 116, 123, 130
Durrett,Russ.......................154
Durrieu,David......................154
Dwyer-Joyce,Rob...............116
Dykas,Brian David................81
E
Eagles,Naethan..................172
Ebenhoch,Michael..............150
Ebert,Christof.......................44
Ebert-Hamilton,Sheila.........173
Ebrahimi,Khashayar............157
Echempati,Raghu.................79
Eckert,Peter.......................156
Eckhoff,Stephan...................69
Edwards,Chris....................126
Edwards,James..................123
Edwards,K. Dean........ 73, 148
Ee,Chris A. Van..................173
Efthymiou,Petros................152
Egbers,Robert....................101
Egelhaaf,Markus.................161
Egel,Thomas........................50
Eggenschwiler,Panayotis
Dimopoulos.......................60
Egüz,Ula.............................133
Ehmen,Günter......................45
Eichberger,Arno..................165
Eichhorn,Alexander............134
Eiden,Corey........................157
Eijnden,Edwin Van den.........67
Eilts,Peter.................. 136, 156
Eisele,Magnus......................59
Ejakov,Mikhail A..................147
Elbel,Stefan..........................73
El-Demerdash,S.................108
Elfstrom,Gary......................165
El-Gindy,Moustafa..... 104, 105
Elgowainy,Amgad.................70
El-Hannouny,Essam................... 138, 145, 154
Elkins,Scot.........................172
Ellersdorfer,Christian...........135
Ellims,Michael.......................48
El-Nashar,M........................108
El-Sayed,Mohammed...............
84, 85 139
El-Sharkawy,Alaa......................
59, 71, 72, 84, 84
Eltaib,Mohamed...................74
El-Zeghayar,Maria.................97
Emekwuru,Nwabueze G.....146
Emery,Rod............................85
Endo,Tetsuo.........................60
Engdahl,Henrik.....................65
Engineer,Nayan..................140
Engler-Pinto,Carlos...............97
Enomoto,Mitsuru................107
Enshoiwa,Masushi................43
Enzi,Bernhard.....................150
Equoy,Samuel....................145
Erdelyi,Hunor Etele.............147
Erdemir,Ali..........................107
Erdogus,Tolga....... 85, 97, 108
Erickson,Mark S.................170
Eriksson,Henrik..................165
Ernest,Steven Nelson.........156
Ersal,Tulga..........................138
Ertl,David............................123
Esaki,Tatsuhito...................135
Escobar,Jorge Meza.............53
Esmaael,Rafaa...................110
Essayem,Eddie...................120
Estefanous,Fadi Adly Anis..125
Etemad,Shahrokh...............142
Evans,J. Howard..................43
Evans,Nancy C...................163
Everest,Brian J...................173
Evers,Rainer.........................53
Ewing,David.......................147
F
Fabien,Brian.......................124
Fadler,Gregory....................162
Falck,Georg von.................150
Fallahi,Abdolreza..................45
Fallah,Saber........ 49, 168, 176
Fallon,Lisa................. 101, 173
Fan,Brian..............................54
Fang,Mingxia......................112
Fan,Kuaichu.......................108
Farina,Alexandre Bellegard.. 106
Farnsworth,Jared.................43
Farrell,Michael....................173
Fartaj,Amir..........................147
Fatemi,Ali............................104
Fatouraie,Mohammad........118
Fayazbakhsh,Mohammad Ali...69
Fayer,Trevor A............ 116, 124
Fay,Richard.........................166
Fazio,John..........................101
Fedor,William J...................144
Fedullo,Joseph...................177
Feiertag,Nico................. 47, 50
Feist,Florian........................135
Feng,Chong.........................49
Feng,Lei.............................139
Feng,Renhua............... 97, 139
Feng,Zhili................... 100, 153
Fennell,Daniel.......................60
Fermér,Mikael.....................172
Fernandez,Vernon..............110
Ferrari,Felipe.......................154
Ferreira,Fabio Da Silva........129
Ferreira,Matheus.................142
Ferreira,Vitor.......................145
Ferris,John........ 104, 175, 176
Feru,Emanuel.....................154
Ficek,Christoph............. 47, 50
Field,Ian..............................119
Fietzek,Rafael.....................175
Fievisohn,Elizabeth Mary....173
Figueiredo,Guilherme............79
Figueiredo,Leandro.............152
Figuiere,Alexandre................54
Filipi,Zoran S............................
131, 138, 144, 151
Filippo,Andrea De...............131
Filippo,Nicoletta....................84
Finch,David A............ 165, 172
Finesso,Roberto.................130
Fingerman,Michael E..........120
Finn,Joshua........................147
Fiocco,Marco.....................120
Fischer,Andreas..................156
Fischer,Matthias..................120
Fischer,Ralph........................65
Fischer,Simon.......................73
Fischer,William....................166
Fischnaller,Manuel..............134
Fisher,Jacob L....................173
Fisher,Scott........................134
Fitzgerald,John...................141
Fitzgerald,Matthew.............163
Fitz,Todd............................104
Fix,Ryan.............................171
Flannagan,Carol.................173
Flannagan,Michael..............170
Fleck,Paul.............................90
Fleischer,Dirk........................48
Flesher,Dan........................101
Florea,Radu............... 126, 155
Florida,Lisa...........................72
Florio,Salvatore.....................73
Fogarty,Adam.....................116
Foley,James.......................163
Foley,Robert.......................150
Foley,Robin D.....................103
Foltz,Patrick........................163
Fondaw,Kevin E....................50
Fontanesi,Stefano..127, 132, 140
Font,Gregory......................136
Foong,Tien Mun.................132
Foote,Eric B.........................69
Forbes,William J...................45
Forero,Chris........................107
Formentin,Simone..............143
Forsmark,Joy.....................106
Försth,Michael....................161
Forsthuber,Friedrich............140
Forte,Thomas.....................104
Foster,David.......................154
Foster,Matthew...................148
Fotowat,Shahram...............147
Fotsch,Robert......................59
Fowler,Michael....................138
Fox,Ethan E..........................60
Fox,Matthew......................123
Fox,Nick...............................60
Fragkiadoulakis,Pavlos.........64
Frait,John A........................122
Francois,Guillaume...............43
Francqueville,Loic de..........126
Frank,Benjamin...................148
Frank,Torsten........................64
Fraser,Roydon Andrew................ 124, 132, 138
Frasinel,Vasile.....................133
Frazier,Shane........................67
Freeland,Paul......................140
Freeman,Claire...................164
Freeman,David V........... 48, 52
Freeman,Kevin....................133
Freeman,Paul.......................91
Freixas,Alex................. 72, 162
Freuer,Andreas.....................50
Freund,Deborah M........ 48, 52
Frey,Michael.........................60
Friedl,Chris...........................83
Friedman,Peter A...............109
Friedrich,Horst E.................151
Friedrich,Lars......................108
Fries,Wolfgang......................85
Fritz,Michael.........................60
Fritz,Ralf...............................43
Frobert,Arnaud.....................75
Froehlich,Michael................138
Frommann,Patrik................152
Fronczak,Barbara M.............89
Fuchs,Anton.........................48
Fuchs,Neil..........................156
Fu,Jianqin.................... 97, 154
Fujii,Yuji..............................120
Fujikawa,Taketoshi..............125
Fujita,Mahoro......................134
Fukata,Osamu......................48
Fukui,Kenji..........................125
Fukui,Takahiro....................145
Fukushima,Tatsuya.............163
Fuller,Joshua Baden...........164
Fulton,Brien........................130
Furey,Robert.......................130
Furukawa,Takayoshi...........108
Furutani,Masahiro...............147
Fussner,Doug.......................81
Fu,Wenkui............................98
Fu,Yan........................... 85, 85
Fu,Yao............... 134, 135, 149
G
Gabbasa,Asya......................53
Gabler,H.............................166
Gabler,Hampton C.... 165, 173
Gade,Teena..........................48
Gaertner,Lutz......................150
Gaikwad,Surendra..............127
Gaines,Linda........................69
Gajji,Anurag..........................79
Galindo,J............................131
Gallagher,Kevin.............. 65, 69
Gallegos,David.....................72
Galle,Jonas............... 139, 155
Gallo,Yann..........................138
Gallrein,Axel........................104
Galvagno,Enrico.................174
Ganaoui-Mourlan,Ouafae El.. 152
Gandhi,Swapnil....................51
Ganesan,Subramaniam........53
Gangani,Bhavesh Prabhulal..173
Gangwar,Hans....................123
Gang-Won,Jang...................98
Gan,Quanquan...................124
Gao,Dingwei.............. 118, 154
Gao,Feng.................... 49, 177
Gao,Ya...............................154
Gao,Yuan...........................154
Gao,Zhiming.... 48, 72, 73, 132
Gao,Zhiqiang......................148
Gao,Zhongquan.................116
Garcia,Antonio... 138, 147, 155
García-Cuevas,Luis Miguel..120
Garcia,Jose M... 118, 125, 136
García,Marta.......................140
Garcia,Patrick.......................85
Gardner,Martha....................80
Gardner,Timothy P................60
Garner,Colin P...... 60, 118, 152
Garrett,Steve......................131
Garrott,W. Riley........................
165, 168, 170, 175, 177
Gasworth,Steven................104
Gatti,Jordan.......................171
Gaudani,Ghanshym..............67
Gauriat,Antoine.....................69
Gautam,Anirudh.................130
Gauterin,Frank............. 60, 102
Gautrot,Xavier.....................126
Gaylard,Adrian P.......................
162, 164, 165, 168, 175
Gaynor,John A....................125
Gazzarri,Javier....................134
Gebhard,Peter......................45
Geca,Michal.......................145
Ge,Hai-Wen........................154
Gehrke,Christopher... 147, 154
Gehrke,Sebastian...............156
Geist,Bruce K.....................134
Geller,Benjamin...................123
Geng,Hong.........................134
Geng,Pat............................130
Genzale,Caroline L.............132
George,Ryan......................101
Georgiadis,Evangelos...........64
Gerard,Mathias...................110
Gerard,Sebastien..................47
Gerlach,Dieter......................83
Germane,Geoff.......... 165, 170
German,John................ 59, 61
Getzlaff,Jörn.......................156
Ge,Yunshan..........................75
Ge,Zicheng...........................45
Ghaffari,Ali............................49
Ghafourian,Akbar.. 139, 145, 152
Ghandhi,Jaal..... 118, 147, 154
Ghasemi,Amir.......................61
Ghmati,Ramadan.................53
Gibbs,Jerry.........................130
Gideon,Thomas..................166
Giechaskiel,Barouch...... 69, 70
Gimelli,Alfredo....................136
Gimenez,Leonardo.............138
Gingrich,Jess......................156
Girard,Patrick.......................81
Giusto,Paolo.........................47
Givler,Shawn D.......... 133, 140
Gizatullin,Andrey.................104
Gladyshev,Sergey P..................
54, 145, 152
Glass,Gary............................84
Gleason,Mark E........................
162, 164, 165, 168, 175
Glennan,Thomas................106
Glinsky,Gerard......................67
Glover,Keith........................131
Glugla,Chris........................156
Göbbels,René....................104
Goddard,Jeremy..................89
Goede,Stefan de....... 130, 146
Goey,Philip de..... 61, 133, 154
Goldenberg,Nahum............152
Goldsborough,S. Scott.............
141, 147, 154
Gollob,Peter.......................135
Golsch,Kevin......................162
Goncalves,L.M.....................61
Gonder,Jeffrey D.................152
Gong,Huifeng.....................154
Gong,Jian.................... 71, 127
Gong,Jing...........................124
Gong,Kevin..........................97
Goodarzi,Avesta...................83
Goodman,David W...............67
Goodreau,Bruce H.............104
Goodrich,Barbara.....................
116, 123, 123, 130
Goossens,Paul............ 83, 132
Gopalakrishnan,Bhaskaran.......
62, 62, 66, 67
Gordon,Timothy.................104
Gorelik,Lev...........................79
Gorsich,David.....................104
Gosman,Allen David.................
120, 127, 132, 140
Goto,Takashi......................130
Gottschalk,Wolfram............142
Gou,Jinfang........................153
Goulet,Jean-Francois.........171
Govani,Ifran..........................59
Govindswamy,Kiran............150
Gowrishenkar,N....................83
Gowri,Vivek........................130
Gracián,Manuel A...... 170, 173
Grady,Michael L....................70
Graebel,Patrick.....................43
Gramling,Hubert.................172
Granzow,Claus...................142
Graupner,Karola...................60
Graupner,Wilhelm...............142
Gray,Tyler............................152
Greene,Thomas L...............120
Green,Johney.....................133
Gregori,Ivan Scansani.........110
Greiner,Juergen..................151
Grekhov,Leonid..................129
Greve,Bruce N....................107
Greven,Klaus......................103
Grewe,Ralph......................170
Griend,Steven J. Vander.....150
Griensven,J.G.H.................155
Griffor,Edward.......................53
Grigoriadis,Panagiotis.........121
Grill,Michael........................127
Grimaldi,Carlo N.................140
Grinstead,Keith.......... 116, 156
Grinsteinner,Darin J............107
Groetsch,Matthias................43
Grondin,Olivier....................156
Gross,Alexander.................173
Gross,Todd...........................80
Grover,Ronald O.................120
Gruber,Christian..................161
Gruber,Patrick....................168
Grumbach,Martin...............151
Grünefeld,G........................157
Grygier,Paul..168, 170, 175, 177
Gstrein,Gregor....................135
Guardiola,Carlos.................116
Gudmundsson,Thordur......146
Guenther,Dennis A...................
167, 168, 169, 177
Guenther,Mark......................69
Guessous,Laila...................112
Gu,Helen............................106
Guiang,Allison.....................161
Guido,Chiara......................154
Guillou,Erwann...................138
Guinther,Gregory................118
Gu,Jianmin...........................97
Gu,Jingbo..........................130
Gu,Junhai...........................112
Gukelberger,Raphael..........157
Guldberg,Tina.......................65
Guleryuz,Feray......................96
Guliaeff,Alexander.................60
Gunderson,Joel......... 142, 144
Gundmalm,Stefan..............120
Gunther,Alfred A...................71
Günther,M..........................157
Guo,Haiding.........................97
Guo,Konghui......................169
Guo,Mike... 101, 104, 107, 110
Guo,Mingchao....................104
Guo,Sai..............................176
Guo,Wei.................... 118, 154
Gupta,Amit...........................53
Gupta,Deepak... 62, 62, 66, 67
Gupta,Sahil...........................73
Gupta,Sidharth.....................55
Gupta,Subhabrata................65
Gupta,Tarun.........................79
Gu,Randy.. 81, 83, 83, 84, 84, 112
Gurney,David......................142
Guthrie,Jim.........................130
Guven,Metin.......................108
Gu,Zhengqi............... 171, 177
Guzman,Arturo...................162
Gysel,Nicholas....................116
Gysen,Bart.........................176
H
Haag,Johannes..................151
Habermann,Knut................152
Habibi,Saeid.......................139
Hack,Michael......................107
Hada,Masatoshi.................107
Hadavi,Seyed.............. 75, 131
Haddad,Mario....................161
Hadef,Jamil El....................139
Haehndel,Kristian.................64
Haertel,Walter Jr.................110
Hageman,Mitchell.................67
Hagen,Chris.......................134
Haggag,Salem A....... 127, 168
Haight,Sean........................163
Hajbabaei,Maryam..116, 123, 130
Hallac,Peter........................153
Hall,Jonathon.....................145
Hall,Matthew J.. 118, 125, 154
Hall,Ronald...........................72
Halsall,Scott.......................135
Hamacher,Thomas...............45
Hamade,Sam.......................90
Hamamoto,Naoki...............164
Hameister,Henry...................67
Hamid,Hairul Fahmi Abdul....79
Hamilton,Len......................116
Hamilton,Leonard...............107
Hamje,H.D.C......................136
Hammad,N.........................108
Hampe,Clemens.................157
Hanamura,Katsunori.............59
Hance,Brandon M..... 106, 109
Haney,Paul.........................172
Han,Jeongwoo.....................70
Han,Karam.........................133
Hanna,David.......................130
Hannon,Mark......................134
Hansdah,Dulari...................155
Hansen,John........................50
Hanson,Reed............ 132, 154
Han,Taeyoung....................175
Han,Xiaoran........................136
Han,Xiaoye.........................137
Han,Xu...............................173
Hao,Lei...............................145
Haorongbam,Bisheshwar...163
Hao,Yumin..........................168
Happonen,Matti....................63
Haque,Imtiaz........................90
Hara,Hiroki.........................147
Harasek,Michael...................73
Hardman,Ken.....................133
Hardy,Warren N..................173
Hargrave,Graham K............152
Hari,Deepak.......................145
Harmeyer,Keith...................168
Harmon,George....................84
Harper,Jason D....................53
Harp,Spencer............ 136, 146
Harrelson,Heather..............148
Harris,Hugh........................102
Harrison,Nia R....................109
Harry,John E.........................60
Harta,Ionut C......................108
Hartfelder,David....................44
Harty,Damian........................48
Hasegawa,Manabu............153
Hashimoto,Keita.................145
Hashimoto,Kohtaro............132
Hashimoto,Susumu............119
Hashimoto,Yuji....................109
Haslinger,Reinhold..............150
Hasson,Tareq.....................108
Hatakeyama,Nozomu.........163
Hatamura,Koichi.................157
Hatano,Kunimichi...............175
Hata,Tsunehisa.....................79
Hatti,Kalyankumar..............110
Hatti,Kalyankumar Sidram....98
Hattori,Fumiaki...................119
Hattori,Kunio......................144
Hattori,Yoshiaki...................125
Hatwalne,Mrunal R.............110
Haupt,Hagen......................138
Havele,Vivek V......................90
Havenith,Bert......................110
Hayakawa,Kazumi................62
Hayakawa,Yasuhisa..............48
Hayashi,Yasutaka...............135
Hayat,Olivier.........................64
Hayes,Wilson C..................170
Haynes,William David.........129
He,Chengkun.....................153
Heck,Ronald.........................69
Hector,Louis.............. 101, 112
Heeb,Adm Norbert...............60
He,Fan........................ 45, 147
Hegarty,Kieran......................67
Hege,Andreas......................48
Heguri,Hisashi....................168
Heide,Sigrid ter...................110
Heikkilä,Juha........................63
Hein,Martin...........................46
Heinrichs,Bradley E............171
Heinzle,Roman...................140
Heitzer,Armin........................60
Heitz,Mark...168, 170, 175, 177
Held,Florian........................138
Heldmann,Markus..............155
He,Lei.................................174
Hellenbroich,Gereon...........150
Hellgren,Jonas......................65
Hendrickson,James............134
Hendricks,Terry...................147
Henein,Naeim.....................125
Henkel,Florian.......................65
Henkler,Stefan......................45
Henly,Timothy.....................118
Hennige,Volker...................135
Henry,Carol...........................63
Henshall,Ed..........................80
Henze,Roman....................107
Hepokoski,Mark...................68
Hergart,Carl..120, 127, 132, 140
Hermann,Steve...................120
Hermann,Thomas.................44
Hermanutz,Ralf...................165
Hermle,Sandra.....................60
Hernandez,Diana................173
Hernandez,Santiago...........169
Hernandez,Yaru Najem
Mendez...........................154
Hernando,Laura Sebastian...66
Herniter,Marc............... 50, 123
Herold,Zvonko....................134
He,Rong...............................98
Herrera,David.....................170
Herreros,Jose M...................60
Herrin,Ronald.....................135
Hessel,David......................170
Hetet,Jean-François.............64
Hettinger,Alexander............134
Heuser,Benedikt........ 126, 136
Heuss,Wolfgang...................63
Heydinger,Gary J...................... 167, 168, 169, 170, 175, 177
He,Yongling..........................49
He,Yuhai.............................117
He,Yuping.................. 166, 170
Hickman,Gregory Fitzpatrick.. 83
Hidaka,Nobuhiro...................59
Hideharu,Ehara...................139
Hieke,André........................107
Higashi,Kenji.......................106
Higashi,Takayuki.................145
Higuchi,Naritomo................145
Hijawi,Mohammad................80
Hillermeier,Roman...............108
Hill,Leslie..............................66
Hillman,Michael..................124
Hill,William Raymond..... 69, 73
Himmler,Andreas..................48
Hinch,John.........................173
Hinojosa,Matthew...............133
Hinrichs,Ruth............... 62, 110
Hirai,Toshiro........................152
Hiramoto,Jiro......................109
Hirano,Izuho.......................152
Hirokazu,Shoda....................83
Hirose,Toshiyuki..................125
Hirose,Yuichiro....................107
Hiroshi,Yokoyama.................71
Hitomi,Mitsuo.......................59
Hoag,Kevin L......................136
Hoard,John................... 66, 71
Hoare,Dave W......................60
Hobeika,Teddy...................169
Hocking,Chris.....................154
Hodges,Steven...................161
Hoepfner,Andreas.................75
Hoerter,Christian.................118
Hoffman,Karl Heinz.............156
Hofstetter,Georg...................47
Hogirala,Ramana................120
Hoher,Markus.....................150
Hohm,Andree.....................170
Hoic,Matija.........................134
Hoke,John................. 116, 156
Holberg,Hans J............. 45, 48
Holcombe,Sven..................173
Holland,Michael..................168
Holland,Steven W.......... 48, 52
Holland,Tim........................172
Hollowell,William Thomas...101
Holl,Reinhard......................165
Holz,Eckhardt.......................48
Homsi,Emile................ 62, 110
Hongbin,Wang.....................82
Hong,Guang.............. 132, 151
Hong,Jeong Kyun..............104
Hong,Seung Hoon.............100
Hong,Seungwoo................132
Honkanen,Markku..............146
Hoover,Ryan.......................172
Ho,Phu...............................124
Horihata,Satoshi...................53
Horioka,Satoshi..................101
Horn,Quinn.........................150
Horstemeyer,Mark..............106
Hosonuma,Norimasa..........111
Hosoya,Mitsuru....................67
Hossain,Shekh Nisar..........154
Hosseini,Vahid......................68
Hotta,Yoshihiro...................140
Hou,Deyang.......................139
Hou,Haixiao..........................71
Houille,Sebastien................138
Houjoh,Haruo.....................120
Hountalas,Dimitrios.... 138, 147
House,Evan........................135
Hovey,Chad............... 163, 170
Howell,Jeff..........................175
Howland,David L................168
Howlett,Michael..................150
Hoyer,Kevin S............ 125, 130
Hoyer,Ruediger.....................69
Hrnjak,Pega..........................74
Hrnjak,Predrag.............. 73, 74
Hsu,Chan Wei....................177
Hsu,Timothy P........... 170, 173
Huang,Gang.......................112
Huang,George....................101
Huang,Haiyan.....................124
Huang,Jun..........................161
Huang,Weidi.......................154
Huang,Xiaosong.......................
134, 138, 150, 152
Huang,Xiayun.......................63
Huang,Yinghao...................161
Huang,Zhen.........................69
Huang,Zuohua..... 71, 116, 124
Huber,Robert......................141
Huberts,Garlan...................156
Hu,Erjiang.................. 116, 124
Huff,Shean.......... 116, 60, 140
Hu,Henry............................103
Huh,Kang Y........................133
Hu,Hu.................................107
Hu,Jingwen........................163
Hu,Liangjun............... 130, 138
Hülser,T..............................157
Hu,Minzhang......................125
Humke,Daniel.....................124
Hunault,Alexandre..............120
Hung,Yi-Hsuan...................152
Hunt,Gregory......................119
Huo,MIng.................. 139, 154
Huria,Tarun................ 134, 134
Husher,Stein E........... 165, 170
Hu,Sibo..............................102
Hussin,Mohd Asmu'i..........147
Husted,Harry..... 125, 130, 134
Huston,Michael..................119
Hutchinson,Robert Hutch...100
Hu,Tiegang.........................142
Hu,Tinghui............................61
Huurdeman,Bernhard.........120
Hu,Xiao..............................138
Huylebroeck,Thomas..........150
183
participant index
Hu,Zongjie................. 154, 154
Hwang,Ho-Ling..................140
Hwang,Yunho................ 59, 68
Hylton,Peter................ 90, 172
I
Iadicola,Mark......................112
Iannuzzi,Stefano........ 131, 136
Ibarra,Ireri.............................53
Ibrahim,Fady.......................127
Ickes,Andrew......................123
Iemura,Akiyuki....................156
Ienaga,Yuichi......................106
Iezawa,Masahiro.................130
III,Charles Sprouse...............68
III,Harry Meyer......................71
Iio,Shuichi...........................153
II,P. Miller............................163
Ikram,Isaac.........................173
Ilinich,Andrey......................109
Imaeda,Takao.......................62
Imai,Kenjiro...........................73
Imaizumi,Hidetoshi...............48
Imaoka,Yoshihiro................153
Im,Seongsu........................170
Inagaki,Hiroyuki....................46
Inagaki,Kazuhisa.................129
Inaguma,Yoshiharu.............135
Inazumi,Toru.......................109
Inderwisch,Kathrien..............61
Indiveri,Giovanni.................124
Ingrosso,Fabio....................124
Inguva,Sudhakar................151
Inoue,Daisuke.....................144
Inoue,Kenshi.......................106
Inoue,Masashi........... 144, 145
Inoue,Toshiaki.....................157
Insalaco,Phil.......................101
Inui,Masatsugu...................108
Inukai,Koichiro....................144
Iorio,Silvana Di........... 134, 150
Ipek,Rasim...........................96
Iqbal,Owais........................120
Irannejad,Abolfazl...............127
Irick,David...........................147
Isarai,Ryoji..........................147
Ishida,Masahiro..................138
Ishiguro,Syunsuke................98
Ishihara,Soichi....................116
Ishii,Yasuhiro.........................61
Ishikawa,Naohiro................135
Ishikawa,Shigeaki...............152
Ishikawa,Takumi...................45
Ishikawa,Tohru....................139
Ishiki,Kazuya.......................135
Ishimaru,Shinya....................60
Ishizuka,Koji.......................143
Isin,Ovun............................110
Ismail,Mohammed..............147
Ismail,Youssef.....................154
Isogai,Toshiki........................55
Isogai,Yumiko.....................104
Istif,Ilyas..............................110
Itagaki,Kenji........................145
Ito,Hiroshi.............................62
Ito,Hisahiro.........................132
Ito,Kanako............................66
Ito,Tomoaki...........................60
Ito,Yoshitaka.........................63
Ito,Yoshiyasu......................143
Ivanco,Andrej......................131
Ivanovic,Vladimir.................134
ivarsson,Jan.......................163
Iwahori,Keisuke..................107
Iwai,Koichiro.........................62
Iwamoto,Takashi.................135
Iwasaki,Kentaro....................63
Iwasaki,Makoto..................145
Iwashita,Kazufumi.................84
Iwata,Hidemasa....................63
Iwata,Kazuya......................164
Iyengar,Sarangarajan
Vijayraghavan..................145
184
J
Jaberi,Farhad............ 127, 145
Jackey,Robyn.....................134
Jackson,Thomas..................47
Jacobson,Jan.......................44
Jacobs,Timothy J...............132
Jagarlapudi,Pavan Karthik....71
Jager,Bram De...................154
Jahani,Kambiz............. 98, 149
Jaikamal,Vivek............... 43, 45
Jakobsson,Lotta.................172
Jakym,Joseph....................170
Jalali,Kiumars............ 175, 177
James,Christine....................69
Janas,Peter........................139
Jang,Ikkeun..........................84
Jang,Kwonwoo..................133
Janka,Kauko........................66
Jansen,Wilko........................64
Jansons,Marcis......... 137, 146
Janssen,Detlef......................45
Japikse,David............ 130, 138
Jauch,Friedemann..............151
Javaherian,Hossein............131
Jawad,Badih Ali....................53
Jayachander,Sreegururaj......54
Jayakumar,Paramsothy......103
Jay,Stephane......................132
Jehlik,Forrest......................124
Jeihouni,Yousef..................147
Jenkins,Craig..... 130, 136, 146
Jennings,Mark........... 130, 138
Jensen,Matthew.................163
Jeon,Byeong wook............148
Jeong,Sang Ho..................170
Jeon,Jaewook....................103
Jeon,JinHwa......................102
Jeon,Jongik........................123
Jermakian,Jessica..............173
Jersak,Marek........................50
Jesch,David........................118
Jeudy,Eric.............................75
Jha,Kaushal Kumar..............64
Jhavar,Rahul.........................73
Jia,Ming..............................128
Jiang,Binhui........................163
Jiang,Chonghua.................106
Jiang,Jianhua.....................112
Jiang,Shugang...................138
Jiang,Xin.............................149
Jiang,Xue...........................116
Jiang,Zhen...........................85
Jiao,Jianzhong...................170
Jilesen,Jonathan.................164
Jilwan,Giscard......................43
Jimenez,Eugene.................133
Jin,Ankang...........................80
Jin,Hyomin.........................142
Jin,Shenghan.......................74
Jin,Wensi....................... 43, 45
Jin,Xueming........................125
Ji,Yan.................................134
Jo,Bong Lae.......................122
Jochim,Markus.....................53
Jochmann,Paul..................140
Jo,Chunghoon....................123
Johansen,Lars Christian Riis.. 135
Johansson,Bengt.....................
125, 125, 132, 134, 136, 138,
140, 154
Johansson,Inge..................104
Johansson,Rolf.....................44
Jo,Hee Young.....................169
Johnson,Bernard................126
Johnson,Donald.................143
Johnson,Jaclyn......... 125, 154
Johnson,James....................63
Johnson,John........................... 60, 66, 67, 71, 73, 73
Johnson,Joshua C...............79
Johnson,Kent C........ 116, 130
Johnson,Michael................125
Johnson,Neil M........................
134, 138, 150, 152
Johnson,Thomas................154
Johnson,Timothy........... 59, 73
Johnston,Grant L...............165
Johnston,Robert.................102
Johrendt,Jennifer................107
Johri,Rajit.............................65
Jo,Hyunkwon.......................84
Jones,Aaron...... 133, 161, 163
Jones,Chris........................111
Jones,Peter D......................91
Jones,R. Peter.....................53
Joo,Min-Chul......................152
Joo,Shinhyuk......................150
Jordan,Jonny.....................118
Jordon,J. B........................106
Joseph,Johnson.................105
Josevski,Nikola...................111
Jo,Shin-ichiro.....................175
Joshi,Prachi........................110
Joyce,Peter........................107
Ju,Jaehyung.......................168
Jung,Byungsub..................152
Jung,Daebong....................152
Jung,DaeWoo....................173
Jung,Dohoy..........................68
Jung,Hak Sup......................64
Jung,Heejung................ 69, 70
Jung,Hojin..........................142
Jung,Hosuk H........... 150, 151
Jung,Hyunsung..................150
Jung,Won Wook.................110
Jung,Yongjin.......................126
Jun,Sanghyuk....................116
Jun,SangYoul.......................69
Jun,Sungbok......................148
Jun,Wang.............................51
Jun,Young Ha.....................123
Justen,Rainer.....................161
Justet,Frederic....................145
K
Kaario,Ossi.........................155
Kabasawa,Akira..................145
Kabasin,Daniel Francis.......134
Kado,Robert.........................46
Kad,Rahul Murlidhar...........110
Kafkas,Mahmut....................46
Kageyama,Yusuke..............172
Kaiadi,Mehrzad...................125
Kaiser,Michele......................71
Kajita,Kentaro.......................45
Kako,Junichi.......................132
Kalaskar,Vickey...................135
Kaldas,Mina M.S....... 107, 107
Kaleto,Helen A...................163
Kale,Vaibhav.......................130
Kalghatgi,Gautam...... 126, 157
Kalupson,Jim......................134
Kamalakaran,Radha...........104
Kamasamudram,Krishna...60, 66
Kamath,Sachin R...............167
Kamau,Henry.....................123
Kamichi,Kensuke..................45
Kamp,Carl............................59
Kanaya,Tomoko..................104
Kanbolat,Ahmet..97, 85, 98, 108
Kan,Cing-Dao.....................173
Kan,Cing-Dao (Steve).........101
Kanda,Mutsumi..................119
Kaneiwa,Hiroshi..................145
Kaneko,Satoshi..................129
Kaneyama,Takashi..............152
Kang,Bongsu.....................153
Kang,Chan.........................116
Kang,Chang Won...............122
Kangde,Suhas............. 85, 110
Kang,Dongil........................135
Kang,Hong Tae......... 106, 107
Kang,Jidong.. 96, 97, 101, 112
Kang,Jiwon..........................69
Kang,Jung Whun..................63
Kang,Ken...................... 96, 97
Kang,Kern-Yong.................150
Kang,Zhiqiang........... 118, 154
Kanianthra,Joseph..... 165, 170
Kannan,G.R........................155
Kanniah,Kannan.................147
Kanniainen,Kauko.................63
Kapas,Nimrod....................120
Karaagac,Mustafa.................... 97, 85, 98, 108
Karavalakis,George...................
116, 123, 130
Karjalainen,Panu...................63
Kar,Kenneth........................148
Karner,Michael............. 48, 161
Karthikeyan,Krishnan..........110
Kasa,Josip.........................139
Kashdan,Julian...................142
Kasuga,Takafumi........... 61, 63
Katagiri,Setsuo...................157
Katanoda,Tomoya..............145
Kataoka,Jun.......................152
Kath,Olaf..............................48
Kato,Hiroshi........................150
Kato,Kenta.........................111
Kato,Kyohei..........................63
Kato,Mitsuru.......................145
Kato,Naoki.........................150
Katori,Noriaki........................97
Kato,Ryutaro......................145
Katrasnik,Tomaz.................140
Katsuki,Hiromitsu...............111
Katsuyama,Etsuo...............170
Kattouah,Philipp...................63
Kauderer,Chris D................165
Kaul,Brian...........................133
Kaule,Dirk.............................54
Kawabe,Yoshiko.................161
Kawaguchi,Akio..................140
Kawaguchi,Masami..............98
Kawakami,Naohisa.............111
Kawamoto,Keiji...................153
Kawano,Masaru.................134
Kawano,Osamu..................101
Kawasaki,Takao..................157
Kazemi,Reza......................171
Kazour,Youssef...................134
Kedzior,Kathleen E....48, 50, 52
Kee,Robert................ 122, 134
Keiichi,Nishiyama................144
Keil,Mitchel...........................81
Keller,James.......................104
Kemle,Andreas.....................72
Ke,Nanji..............................153
Kennedy,Gordon................145
Kenney,Thomas E................90
Keribar,Rifat........................141
Kerner,Tobias........................43
Kerrigan,Jason R....... 161, 163
Kerschgens,Bruno..............120
Kersting,Klaus......................50
Keshavarz,Arash...98, 149, 177
Keskin,Aylin..........................98
Keskinen,Jorma....................63
Kessels,John......................176
Keunecke,Martin................107
Khadilkar,Sumit...................133
Khair,Magdi................... 63, 66
Khajepour,Amir.... 49, 168, 176
Khaknejad,Mohsen Bayani
98, 149, 177
Khalaj,Ahmad.....................177
Khalek,Imad A............... 66, 69
Khalighi,Bahram.................168
Khanse,Karan R.................111
Khan,Siddiq..........................71
Kharazi,Amir.......................175
Khare,Abhijit.........................46
Khare,Alok............................53
Khasawneh,Bashar............153
Khodabakhshian,Mohammad.. 139
Khodaygan,S........................83
Khosrovaneh,Abolhassan.........
107, 110
Kianifar,Mohammed Reza.....81
Kietlinski,Kajetan.................174
Kikuchi,Takashi...................123
Kil,Yongkil...........................108
Kimberley,William................172
Kim,Changgi.......................134
Kim,Dongsu.......................123
Kim,Eui Jun........................122
Kim,Eun-Joo......................110
Kim,Hakgu.........................103
KIM,Heejoong.......................84
Kim,Ho-Kyung....................152
Kim,Hongsuk............... 64, 150
Kim,Hwayoung...................170
Kim,Hyungtae.......................79
Kim,JaeHee........................170
Kim,Jongman.....................164
Kim,June-Yeop...................110
Kim,Junghwan...................125
Kim,Kichang.........................79
Kim,Kyeong-Su..................123
Kim,Kyung-Soo..................153
Kim,Man Young....................64
Kim,Namdoo............... 65, 130
Kim,Namwook........... 130, 152
Kim,Ok.............. 110, 130, 152
Kim,Panyoung....................103
Kim,Sang-Hwan.................148
Kim,Seokjae.........................63
Kim,Seon Pyung.................173
Kim,Shim Soo......................46
Kim,Sun Je.........................153
Kim,Taewung......................163
Kim,Tae Young...................150
Kimura,Kenichiro................145
Kimura,Shoji.........................97
Kim,Wongun.......................104
Kim,Woo............................145
Kim,Yangrae.......................123
Kim,Yong chul......................70
Kim,Yongha..........................69
Kim,Yoon Young...................98
Kim,Youngjae.......................69
Kim,Youngki.......................138
King,Jonathan........... 116, 149
King,Mathieu......................171
Kinnunen,Toni................ 63, 63
Kinomura,Shigeki.................45
Kinoshita,Masakazu............135
Kinoshita,Yukiko.................152
Kiran.............. 71, 72, 134, 150
Kirk,Michael P.....................142
Kirwan,John.......................140
Kishawy,Hossam................105
Kiss,Tibor.............................68
Kittelson,David.....................70
Kkoerfer,Thomas................146
Klacza,Robert.......................44
Klampfl,Erica........................65
Klang,Eric...........................124
Kleeberg,Henning...............140
Klier,Willy....................... 45, 46
Klindt,Kody G.....................144
Kling,Anders.......................172
Klinich,Kathleen D..............173
Klink,Wassim........................63
Kloft,Peter..........................153
Klose,Charles.....................138
Klose,Frank..........................60
Klos,Ralf.............................103
Klyatis,Lev... 79, 79, 80, 80, 80
Knapton,Daniel Jason........119
Knauder,Christoph..............135
Knock,Aaron......................125
Knockeart,James...............151
Knop,Vincent......................120
Knorsch,Tobias...................155
Kobayakawa,Hiroki.............111
Kobayashi,Makoto..............108
Kobayashi,Takaya...............104
Kobayashi,Tsutomu..............79
Koch,Alex.............................54
Ko,Charles................ 101, 157
Koch,Charles R..................157
Koch,Daniel........................165
Kochhar,Dev.............. 161, 170
Kochhar,Nand....................101
Kochilla,John........................96
Koci,Chad..........................126
Kock,Florian.......................151
Kodama,Katsuhiro..............104
Kodjak,Drew.........................73
Kodsi,Sam..........................170
Koenig,Damien...................173
Koerfer,Thomas....................70
Koganti,Ramakrishna...........79
Köhler,Ulrich.........................65
Kohoyda-Inglis,Carla..........173
Kohri,Itsuhei.........................59
Koike,Makoto.....................140
Kojima,Moichio...................144
Kokkolaras,Michael..............85
Ko,Kyungeun......................103
Kolbeck,Andreas F..70, 136,146
Kolhe,Vivek.........................149
Kolkemo,Alan.....................134
Kolodge,Kristin...................163
Kolodziej,Christopher..........154
Koltsakis,Grigorios C............64
Kolwich,Greg......................102
Komada,Keisuke................138
Komar,John........................165
Komatsu,Nobuhiro...............60
Komoguchi,Tetsuya............170
Kondo,Katsufumi................125
Kondo,Masahiko................147
Kondo,Ryota......................152
Kondo,Shigeyuki................138
Kong,Ho young..................102
Kong,Song-Charng.. 116, 118,
125, 136, 136, 146
Königsson,Fredrik...............135
Kono,Michihisa...................145
Kono,Naoki........................125
Konson,Dmitri.............. 60, 105
Konstandopoulos,Athanasios...
59,63
Konstantinov,Alex...............164
Kook,Sanghoon.................125
Köpple,Fabian....................140
Korkolis,Yannis...................109
Korniski,Thomas...................67
Kosaka,Hidemasa..............140
Kosaka,Masataka...............124
Kosanovic,Dragoljub.............67
Koshi,Mitsuo......................132
Kosiak,Walter............ 165, 170
Kotaka,Toshikazu...............123
Koto,Hideaki.......................169
Kotori,Doris..........................46
Kotrba,Adam................. 60, 63
Kott,Kevin.............................45
Kou,You Seok....................127
Kovaceva,Jordanka............163
Kovács,Dávid.....................156
Kowalewski,Marcin...............45
Kowalske,Glenn....................61
Koyama,Michihisa..............163
Kozarsky,Ross....................100
Kraft,Markus.......................155
Krammer,Martin....................48
Kranjcevic,Nenad...............134
Kremer,Florian......................70
Krenek,Thorsten.................140
Krenn,Christian.....................73
Kress,David........................161
Kridli,Ghassan........... 109, 112
Krieger,Roger.....................154
Krishna,Addepalli S............140
Krishnasamy,Anand............132
Krivitzky,Eric.............. 130, 138
Kropac,Miroslav..................170
Krueger,Gregory D................55
Krumbiegel,Klaus...............166
Krumm,Holger......................45
Kruse,Alexander.................173
Krutz,Gary..........................168
KSivasankaran,K..................55
Kuang,Ming........................147
Kubach,Heiko.... 119, 125, 157
Kubalczyk,Ralf....................145
Kube,Matthias....................112
Kubo,Hiroshi.........................62
Kubota,Kenji.......................135
Kubota,Masato.....................81
Kuboyama,Tatsuya.............157
Kubsh,Joseph E............ 61, 69
Kucera,Markus.....................54
Kucharski,Joseph...............120
Küçükay,Ferit....... 61, 107, 149
Kudanowski,Maciej...............45
Kufferath,Andreas...... 134, 140
Kuhnert,Joerg PhD.............173
Ku,Jerry..................... 123, 124
Kuleshov,Andrey.................129
Kulkarni,Anand Vijay.............47
Kulkarni,Ketan R...................47
Kulkarni,Prakash.......... 54, 167
Kulkarni,Swapnil.................174
Kulzer,Andre.......................119
Kumagai,Tatsuki...................66
Kumagai,Tomohisa.............157
Kumar,Ashok............... 60, 147
Kumari,Sarita......................101
Kumar,Naveen............. 73, 123
Kumar,Rajesh.....................142
Kumar,Sanath.......................66
Kumar,Sathish............... 69, 84
Kumar,Virendra.....................53
Kumbhar,Prasad.................107
Kunal,Rana.........................140
Kunz,Timothy.....................156
Kupper,Frank............... 67, 154
Kurachi,Ryo..........................53
Kurbet,Shivakant N..............83
Kuroda,Yukio......................132
Kurple,Ken R........................90
Kurtz,Eric................... 132, 154
Kusafuka,Hironobu...............45
Kusano,Kristofer D.... 165, 166
Kustic,Marko......................133
Kuthada,Timo.....................165
Kuttner,Oliver......................100
Kuwahara,Kazunari.............147
Kuwayama,Isao..................168
Ku,Yong-Yuan....................145
Kuyper,Johannes................135
Kwon,Dae-Hwan................152
K.,Yuaraj...............................65
L
LaBrie,Russell.....................175
Lack,Adam...........................60
Laclair,Tim J.........................73
Laget,Olivier.............. 142, 142
Lähde,Tero...........................63
Lahuerta,Jesús.....................68
Lai,Haipeng........................118
Lai,Ming-Chia.... 123, 125, 137
Lainé,Emmanuel.................119
Lai,Wei-Jen............... 100, 101
Lakshminarasimhan,
Venkatnarayanan......116,148
LaLande,Michael..................85
LaMance,Frederick...............79
Lamb,David A......... 80, 85,103
Lamberg,Klaus.....................45
Lambert,Steve........... 175, 177
Lambert,Thomas................156
Lambeth,Jacob N...............104
Lambiase,Nicole.................116
Lambourn,Richard Frank..........
165, 170
Lampe,Bernhard..138, 148, 156
Lam,Tack............................161
Lance,Michael J............ 60, 71
Landman,Ron.......................43
Landstrom,Christoffer.. 168, 169
Lang,Dominik.......................50
Langenderfer,David.............140
Lange,Thomas...................161
Langhoff,Wolfgang...............43
Lan,Ken T.............................64
Lanski,Scott.......................101
Lanzerath,Horst..................105
Lapetz,John M...................134
Larmi,Martti........................155
LaRochelle,Christopher......152
Laroo,Christopher A.............59
Larsen,Robert.....................172
Larson,Brian.......................173
Lattimore,Thomas..............150
Latz,Gunnar..........................60
Lau,Edmund.......................161
Lauer,Thomas.............. 73, 140
Lavy,Jacques........................55
Lawrence,Jonathan............173
Lawrence,Neal......................73
Lawyer,Kristina...................123
Lazaridis,Ioannis...................69
Lazzaro,Maurizio.................150
Leach,Felix...........................66
Lea-Langton,Amanda...........71
Leamy,Michael....................134
Lechowicz,Philip.................138
Lecompte,Matthieu............136
Le,Daniel............................139
Ledo,Raquel.......................169
Lee,Benjamin........................65
Lee,Bock Cheol....................70
Lee,Byungho..... 130, 134, 138
Lee,Byung-Kyu...................173
Lee,Chia-Fon..... 139, 141, 154
Lee,Donghyeon....................69
Lee,Dong-Ryul...................148
Lee,Haewook.....................123
Lee,Hoon.............................71
Lee,Hui Sung.....................170
Lee,Hung-Chun..................152
Lee,Hyunjun.......................132
Lee,Jae Kil..........................173
Lee,Jeongjin.......................169
Lee,Jeongwoo....................123
Lee,Jinha..............................63
Lee,Jin-Woo.........................48
Lee,Jong..............................74
Lee,Jong Wook..................110
Lee,Junyong.......................132
Lee,Kang Hun......................69
Lee,Kyeong..........................61
Lee,Kyeong O......................71
Lee,Minkwang....................132
Lee,Peter M........................127
Lee,PO-I.............................123
Leermakers,C.A.J...... 154, 154
Lee,Sang Hun....................153
Lee,SangJik........................148
Lee,Sang Min.....................170
Lee,Sang-Ryong................152
Lee,Sangsuk..... 125, 132, 140
Lee,Seong-Young.....................
124, 125, 154, 156
Lee,Seungha............. 123, 132
Lee,Seunghyun..................123
Lee,SoDuk........ 130, 134, 138
Lee,Sungwon.....................134
Lee,Taeyeon.......................152
Lee,Yonggyu......................150
Lee,Yoonwoo.....................123
Lee,Youngjae......................133
Lee,Yung-Li...79, 104, 107, 110
Lefebvre,Alain.....................120
Leffert,Michael......................63
Lefort,Isaline.........................71
Legate,Ian............................49
Lehle,Walter..........................49
Leifer,Jack..........................161
Leigh,Michael J..................163
Leipertz,Alfred....................125
Leiss,Peter J......................165
Lei,Yulong.......... 134, 135, 149
Le,Jerry..............................161
Lejsek,David.......................134
Lelong,Jean-Gabriel...........120
Lemaire,Jacques..................60
Leone,Nicola......................174
Leone,Thomas G................150
Leon,Oscar A. de la Garza de..138
Lequien,Guillaume..............138
Leroy,Thomas.....................138
Lescheticky,Juergen...........101
Lesemann,Micha................165
Letellier,Christophe.............156
Letherwood,Michael...........103
Leto,Raymond........... 165, 172
Leustek,Matthew........... 59, 60
Levendis,Yiannis A...............62
Lev,Leonid............................84
Lewis,David..........................69
Lewis,Phillip..........................90
Lezius,Ulf............................142
Liang,Jie...............................97
Liang,Xingyu.................. 63, 69
Lian,Jianming.......................73
Liao,Ching-Fu.....................145
Liao,Yu-Sheng....................170
Liasi,Evangelos...................109
Liati,Anthi.............................60
Li,B.....................................106
Liberto,Rodrigo César N.....106
Li,Bin............. 81, 60, 168, 105
Li,Bingbing...........................69
Li,Cao.................................139
Li,Cen...................................84
Li,Cheng...................... 84, 148
Lichtenberger,Alexander.......84
Lichtenegger,Bernhard.......135
Li,Delin...............................103
Li,Dongsheng.....................104
Liebbe,Robert.....................163
Lienkamp,Markus.................45
Li,Fan.................................101
Li,Haiying............................139
Li,Hongjian.........................168
Li,Hong-Wei.......................152
Li,Hu........................... 75, 131
Li,Huize................................74
Li,Jan-Mou...........................48
Li,Jianqiu............................124
Li,Jie............ 97, 116, 149, 176
Li,Jing...................................81
Li,Junhui...............................60
Li,Keyu...............................107
Likich,Mark...........................97
Li,Le.......................... 129, 148
li,Li........................................51
Li,Liguang............ 63, 125, 154
Li,Lihua...............................104
Lim,Dong-Jin........................46
Li,Mei.................................104
Lim,Gihun...........................134
Lim,Hyun Kyoon.................163
Lin,Barry (Baizhong)...........107
Lin,Chuen-Sen...................154
Lind,Daniel.................. 79, 165
Lindman,Magdalena...........172
Lindvai-Soos,Daniel............165
Ling,Jiazhen.........................68
Lin,Jianping........................112
Lin,Ko Wei..........................145
Lin,Pai-Chen.............. 100, 100
Lin,Shengbin......... 60, 81, 105
Lin,Shih-Po...........................80
Li,Peng.................................96
Li,Qizhen (Katherine)...........106
Li,Shanju............................130
Li,Shaosong.......................174
Li,ShunBo..........................134
Litke,Paul.................. 116, 156
Litkouhi,Baktiar...................168
Litkouhi,Baktiarr........... 49, 176
Liu,Chao...............................97
Liu,Dai....................... 145, 152
Liu,Feilong......... 142, 147, 156
Liu,Haifeng.........................154
Liu,Hong.............................128
Liu,Jerry........................ 59, 60
Liu,Jichun.................. 118, 154
Liu,Jie.................. 97, 116, 149
Liu,Jingping...97, 139, 142, 154
liu,Jinsong..........................162
Liu,Kuang-Jen......................97
Liu,Liping..............................53
Liu,Shangtao......................138
Liu,Sheng...........................112
Liu,Sheng-Dong........ 101, 104
Liu,Xiao..............................151
Liu,Yang...............................81
liu,Yifu.......................... 71, 135
Liu,Yifu........................ 71, 135
Liu,Yimin...............................65
Liu,Yintong.........................125
Liu,Yucheng..........................84
Liu,Yuchuan........................108
Liu,Z. Gerald.........................63
Liu,Zhenjie..........................149
Liu,Zongwei........................147
Liu,Zongyu.................... 98, 99
Livanos,G...........................120
Li,Wei...101, 104, 145, 147, 152
Li,Wen..................................97
Li,Xiaochun.........................103
Li,Yanfei..............................152
Li,Yang.......................... 45, 81
Li,Yongfa............................135
Li,Yongsheng........................84
Li,Zhangyin.........................108
Li,Zhe.................................129
Li,Zhilong............................154
Locher,Anton......................151
Lockerby,Jack....................163
Loeper,Paul........................154
Lofdahl,Lennart......... 168, 175
Löfstrand,Sofia.....................65
Loganathan,Ekambaram......98
Loganathan,Yaamini Devi.....69
Logan,Roger W....................85
Lohmann,Craig...................118
Lohmann,Nils.....................134
Lohse-Busch,Henning........130
Lo,Josh..............................138
Lombardi,Anthony................96
Lomonova,Elena.................176
Londhe,Abhijit............. 85, 110
Long,Alastair........................66
Long,David.................... 60, 61
Long,Kah Wah.......... 112, 134
Long,Luohui.........................97
Longman,Douglas..............140
Loos,Michael................. 67, 69
Lopes,Jo..............................91
Lopes,Shailesh Martin...130, 132
Lopez,J. Javier...................138
López,M. A.........................131
Lopez,Omar D....................164
Lopez,Yaritza........................63
Lorentzou,Souzana...............59
Lorenzo,Giacomo Di...........140
Lor,Love.............................123
Lotoczky,Richard E...............43
Lounsberry,Todd........ 165, 175
Lou,Zheng David................156
Lovric,Tomislav.....................45
Lozano-Guzman,Alejandro...170
Lozoya-Santos,Jorge
De-Jesus........................173
Lubinski,Paul................. 79, 81
Lucchini,Tommaso..............120
Luchansky,Kevin.................135
Luckey,S. George...... 109, 112
Lu,Dang.............................169
Ludvigsen,Karl......................89
Lueke,Stefan......................170
Lüers,Bernhard.....................70
Lugo,Marcos......................106
Lu,Han...............................128
185
participant index
Luijten,Bennie.....................125
Lu,Jan Gang......................150
Lujan,Jose..........................142
Lu,Jun................................148
Lumbreras,Rebeca.............103
Lundgren,Marcus...............125
Luo,Alan........ 96, 97, 103, 106
Luo,Gang...........................134
Luo,Kai Hong.....................128
Luo,Limin........ 60, 80, 81, 105
Luo,Yong..............................98
Lupescu,Jason.....................69
Lupini,Christopher................53
Lu,Roberto...........................62
Lu,Shuo..............................136
Lust,Robert..........................80
Lu,Y Charles...... 105, 107, 110
Lu,Yingying.........................118
Lu,Yun............... 81, 83, 83, 84
Lv,Chen..............................153
Lynch,Mac............................97
Lyons,James..... 116, 123, 130
M
Maas,Ulrich........................125
Macek,Jan.127, 127, 129, 138
Mache,Ashok.....................108
Machiele,Paul A....................73
Macias,James....................133
Mackay,Robert.....................96
Madison,Daniel...................156
Madsen,Justin....................103
Maegawa,Hitoshi................127
Maele,Christophe Van De...139
Magar,Max.........................125
Magdum,Muragendra.........174
Maghbouli,Amin....................68
Magno,Agnese...................138
Magnotti,Gina M.................132
Mahadevan,Kumar.............101
Mahadule,Roshan N...........108
Mahakul,Budhadeb..................
118, 125, 136
Maheshwari,Pankaj............101
Maiboom,Alain......................64
Mai,Li.................................169
Ma,Jianfeng....... 104, 104, 105
Majkowski,Stephen............144
Makam,Sandeep..................79
Makino,Mikio........................63
Makkar,Bhavuk...................152
Malaczynski,Gerard............143
Malagi,Ravindra R....... 83, 108
Malagi,Santosh.....................54
Malagi,Suprit......................108
Malalasekera,Weeratunge...127
Malbec,Louis-Marie............136
Malen,Donald E..................104
Maletz,Gerd..........................60
Malfettani,Stefano.................66
Ma,Lin................................147
Malinen,Antti.........................63
Malkowski,Brian.................102
Mallamo,Fabio....................145
Mallikarjuna,Jawali
Maharudrappa................140
Malo,Alain...........................111
Maloney,Peter J... 142, 147, 156
Malvicino,Carloandrea..........59
Mammetti,Marco..................72
Manabe,Keisuke.................123
Manary,Miriam....................173
Mancaruso,Ezio......... 138, 155
Mancini,Giorgio..................134
Mancini,Luca......................126
Mandarapu,Silpa..................63
Mandrile,Massimiliano...........70
Manetas,Christos.................64
Mangold,Barrett......... 156, 157
Mani,Neel K........................168
Manish........................ 73, 107
Mankowski,Oliver...............164
Manley,Dawn K....................65
186
Manning,Dennis..................142
Manning,P. Christopher............
46, 116, 123
Manzie,Chris.........................65
Mao,Haojie.........................163
Mao,Shuo...........................101
Ma,Q..................................106
Marantis,Timothy A............168
Marathe,Prathamesh............79
Marcello,Alex........................84
Marchionna,Mario.................73
Marchitto,Luca.......... 131, 150
Marcigliano,Francesco........134
Marco,James.......................53
Marelli,Silvia..........................66
Margaria,Marco....................79
Maria,Amir..........................148
Mariam,Hasetetsion G... 81, 84
Mariani,Riccardo...................48
Maricq,Matti.................. 66, 69
Marine,Micky......................166
Marinitsch,Franz.................140
Markatou,Penelope..............63
Marklund,Jesper.................168
Marlino,Laura............. 145, 152
Marmur,Abraham..................75
Marnell,Judith.....................104
Maroteaux,Damien.............140
Marovic,Boris.............. 84, 145
Marques,Gisela Ablas.........154
Marr,James........................170
Marr,Kevin..........................150
Marsh,Joseph........... 163, 164
Marsh,Richard......................49
Martel,Brian........................150
Martin,Berthold.......... 134, 150
Martinez,Lionel...................132
Martin,Helmut.......................48
Martin,Peter........................156
Martins,Jorge.............. 61, 145
Martuscelli,John.................171
Masahiro,Soma..................139
Masaru,Morise....................150
Masayuki,Takeuchi.............161
Mashkournia,Masoud.........157
Masias,Alvaro...........................
134, 138, 150, 152
Masjosthusmann,Christopher.. 65
Mason,Alex..........................60
Masri,A.R...........................145
Masser,David......................122
Mata,Vicente......................176
Mateer,Caryn........................90
Mathur,Gursaran D................... 60, 63, 68, 73
Mathur,Naresh....................118
Mathusall,Lucas.................142
Matilainen,Pekka..................63
Matsubara,Masahiro.............43
Matsuda,Takuro..................175
Matsui,Yasuhiro..................171
Matsumoto,Hiroaki...............59
Matsumoto,Hiroyuki............168
Matsumoto,Kenji................120
Matsumoto,Shogo..............127
Matsumoto,Shuichi.............138
Matsumoto,Soju...................45
Matsumoto,Tasuku...............63
Matsumura,Eriko................119
Matsuo,Yuichi.......................60
Matsushita,Satoshi.............175
Matsuzono,Yoshiaki..............60
Matthews,Cullen C.............176
Mattson,Jonathan M. S........72
Maunula,Teuvo.............. 59, 63
Maurya,Rakesh Kumar.......149
Mavropoulos,Georgios.......147
Ma,Wei.................................98
Maxey,Claire.......................135
Ma,Xiao..............................139
Maxwell,Timothy T..............124
Mayer,Andreas............... 60, 60
Maynard,Robert..................110
Ma,Yue...................... 107, 168
Ma,Zeyu........................ 80, 82
Mazhar,Hammad................103
Mazhari,Sufian Ashraf...........68
Ma,Zheng-Dong.................102
Mazumdar,Chinmoy............164
Mazzamaro,Glenn..............127
McAleese,Colin...................111
McCarthy, James JR..........157
McConnell,Steven..............133
McCormick,Robert L............60
McCoy,Robert W................163
McCoy,Wiley R.......... 165, 172
McCullough,Geoffrey..........134
McCune,Robert C..............106
McDaniel,Andrew...............116
McDavid,Robert.......................
118, 124, 125, 136
McDonald,Joseph.. 59, 130, 138
McDonald,Martin................107
McDonnell,Randy.................81
McElroy,John......................172
McEwan,Alan.....................129
McFadden,Chris.................118
McGee,Ryan............................ 130, 138, 145, 147, 152
McGehee,Jeffery................127
McInally,Graeme.................172
McKenna,David..................147
McKinley,Thomas.......... 71, 73
McLean,Ian........................134
McMurran,Ross....................53
McPhee,John.... 175, 177, 132
Means,Richard D..................53
Meccariello,Giovanni...... 66, 75
Meckl,Peter................. 75, 116
Meda,Lakshmikanth.............61
Mederer,Thomas................125
Meeks,Ellen..........................66
Mehall,Mark........................168
Mehring,Jan.......................116
Mehta,Darius......................152
Mehta,Rajiv.........................171
Meijer,Maarten....................155
Meistrick,Zdenek................156
Mejía,Luz Adriana...............176
Melaina,Marc W....................73
Melanz,Daniel.....................103
Melaragni,Michael Joseph....43
Melbert,Joachim.................134
Melcher,Daniel....................170
Melek,William.............. 49, 176
Mello,Augusto Themudo....138
Meloche,Eric.........................61
Melvin,John............... 166, 172
Melzi,Stefano........................99
Mendes,Chris.......................54
Mendonca,Fred..... 68, 97, 102
Menegazzi,Pascal...............154
Mengiste,Betelhem.............112
Meng,Xiangwen..................116
Meng,Yan...........................130
Mentink,Paul.........................67
Merati,Parviz.........................63
Merola,Simona.......... 131, 150
Metered,H..........................108
Metwally,Hossam................101
Metz,L. Daniel..... 97, 165, 170
Meyer,Andrew....................154
Meyer,Eric G.......................161
Meyer,John.................. 68, 163
Meyer,Matthew J................172
Meyer,Norbert.....................132
Meyers,Duane R...................97
Mezher,Haitham.................120
Mian,Omar.........................142
Michel,Jean-Baptiste..........132
Michener,Adam..................166
Micklow,Gerald.........................
118, 125, 125, 132, 140
Miersch-Wiemers,Oliver............
133, 147
Miers,Scott................ 123, 156
Migaud,Jerome..................120
Mihara,Yasuko....................104
Mihara,Yuji..........................108
Mikesell,David R.......................
110, 168, 170, 175, 177
Miles,Paul...........................132
Millar,Michael......................104
Miller,James.............................. 134, 138, 140, 150, 152
Miller,Jason...........................85
Miller,Joseph D.....................45
Miller,Robert.......... 43, 45, 109
Miller,Wayne.......................116
Millington,Paul......................60
Millo,Federico........... 120, 127,
129, 132, 136, 140, 145
Mills,Robin..........................116
Milovanovic,Nebojsa.................
142, 147, 154
Milton,Gareth......................156
Minaker,Bruce....................150
Min,Kyoungdoug....... 132, 152
MInoura,Daisuke...................61
Minter,Jeffrey........................50
Mirabdollahi,Asghar............177
Mir,Hicham.................. 81, 111
Mishra,Chinmaya......... 73, 123
Mishra,Mukesh...................164
Mishra,Sushil......................101
Misul,Daniela Anna.... 130, 134
Mital,Rahul.................... 63, 66
Mitchell,Alexander..............130
Mitchem,Sean C...................45
Mitra,Mainak.......................104
Mitsuishi,Hiroyuki................150
Mittal,Mayank.....................126
Miyachi,Takahiko................163
Miyahara,Tetsuya..................79
Miyakawa,Susumu.............107
Miyamoto,Akira...................163
Miyamoto,Ikuto.....................59
Miyano,Masayuki................163
Miyaura,Takeshi..................143
Miyoshi,Akira......................132
Miyoshi,Hiroyasu..................84
Miyoshi,Takehiro.................145
Mizuno,Hideaki.....................43
Mizuta,Hirotaka..................111
Mizutani,Tatsuhiko..............145
Mobasheri,Raouf................129
Mocanu,Florin.....................130
Modin,Håkan......................161
Mody,Sagar..........................45
Mohalik,Swarup....................43
Mohamad,Wan Mansor Wan..79
Moilanen,Peter...................152
Molen,George.....................116
Molina,John Martinez.........173
Molina,Santiago..................154
Molla,Tony............................50
Molteni,Gian-Luigi...............104
Mond,Alan................. 133, 147
Mondal,Pia...........................54
Monde,Masanori................124
Monforte,Roberto.................70
Monkhouse,Helen Elizabeth... 48
Monsallier,Guy....................154
Montanari,Gino...................142
Montanaro,Alessandro........118
Montaru,Maxime................110
Montenegro,Gianluca.........120
Montgomery,Matthew.........176
Montorfano,Andrea.............127
Moon,Jihoon......................108
Moon,Myung Kug...... 163, 173
Moore,Andrew David............53
Moore,Jamie......................173
Moor,Emmanuel De............101
Moore,Wayne............ 118, 148
Morales-Menendez,Ruben..173
Morales,Paola.....................104
Morawitz,Urban..................116
Morelli,Anthony...................138
Morel,Thomas..........................
120, 127, 129, 132, 136, 140
Morgan,Christopher............162
Morgan,Marianne S..................
96, 100, 100
Morgan,Richard M..............173
Morganti,Kai J....................132
Morgan,William...................116
Morikawa,Atsushi...............143
Morinaka,Shoichiro.............123
Mori,Nobuhisa......................66
Morley,John..........................85
Moro,Davide.......................130
Morrison,John L.................139
Morrison,William H.............139
Morstein,Marcus.................107
Morton,Scott........................72
Mosbach,Sebastian............155
Moser,David.................. 69, 69
Moser,Joerg.......................135
Mossop,Dave.....................123
Mostafa,S...........................108
Mostefa,Bouchetara.............64
Motevalli,Vahid..... 116, 45, 116
Motloch,Chester G.............139
Motohashi,Yasuhiro............135
Motoyama,Yumi....................62
Moudgal,Vivek......................45
Moulai,Maryam...................145
Mount,David.........................67
Moure,Christophe.................50
Mourelatos,Zissimos.................
79, 80, 81, 82, 84, 85
Mouzakitis,Alexandros..........53
Mo,Xuhui............................173
M,Prajwal Kumar................167
Mraidha,Chokri.....................47
Mudalige,Priyantha.............166
Muehlmeier,Martin..............166
Mueller,Alan........................102
Mueller,Carsten...................173
Mueller,Charles J................145
Mueller,Egon.........................83
Mueller,Rolf.........................140
Muir,Darryl..........................134
Muli,Mahendra......................46
Mulla,Shadab.......................60
Muller,Christian.....................59
Müller-Glaser,Klaus...............45
Muller,Laëtitia......................142
Mulligan,Michael R.............104
Mullins,Joshua......................82
Mulone,Vincenzo........... 71, 73
Munch,Karin.........................60
Munesawa,Yuji...................107
Munnannur,Achuth........ 71, 73
Munnis,Sean........................71
Muñoz,Jordi.........................72
Munoz,Luis...... 81, 82, 96, 164
Muñoz,Luisa Monico..........155
Muntean,George..................74
Munteanu,Ligia...................163
Murakami,Yasunori.............144
Murakami,Yoshinori............132
Murakami,Yoshio................116
Muraki,Tomoya...................107
Murali,Krishna............ 109, 112
Muric,Kenan.......................156
Murphey,Yi L......................161
Murphy,Dennis....................175
Murray,Brian T..........................
44, 45, 48, 50, 53
Murtagh,Martin...................134
Murty,Pilaka V.......... 81, 83, 84
Musch,Thomas...................134
Musculus,Mark.........................
118, 119, 125, 136
Musial,Marc............... 131, 136
Muslaev,Alexander..............145
Mustafa,Rashad.......... 61, 149
Muttart,Jeffrey....................165
N
Naber,Jeffrey.......... 60, 66, 67,
123, 125, 130, 73, 134, 142,
150, 154, 156, 156
Nagabushan-Venkatesh,
Prasanna...........................60
Nagai,Yuki..........................152
Nagano,Hideaki....................59
Nagano,Yohei.......................72
Nagappala,Rajesh..............150
Nagar,Pranay........................67
Nagata,Makoto.....................60
Nagatsu,Yuichi......................61
Nagle,Tony.........................176
Naguib,Ahmed...................126
Nagumo,Toshiyuki..............145
Nah,Jaewon.......................104
Naik,Chitralkumar V..............66
Naiknaware,Ajay...................84
Naik,Sanjeev M....................55
Naithani,Upendra................145
Nakada,Hayato...................156
Nakajima,Tatsuya..................53
Nakakita,Kiyomi..................140
Nakamura,Akira Luiz..........119
Nakamura,Hiroshi.......... 66, 67
Nakamura,Kazuki........ 63, 163
Nakamura,Keisuke...............59
Nakane,Noriaki...................138
Nakano,Hirofumi...................96
Nakashima,Kohei...............116
Nakashima,Takuji................164
Nakata,Kazuyuki...................45
Nakatsugawa,Junnosuke.....50
Nallapati,Sankar Rao............85
Nam,Edward..... 130, 134, 138
Nampoothiri,Saju..................68
Namura,Yoshikazu..............129
Nanjundaswamy,Harsha K....50
Nantais,Jeffrey......................96
Napolitano,Pierpaolo..........154
Narasimhan,Varuna............122
Narayanan,Sathya..............109
Narayanan,Venkatesh.........110
Narisawa,Fumio....................43
Narita,Takahiro....................127
Narula,Manik........................65
Nash,Dennis.........................90
Nash,Laura.........................123
Natarajan,Ramya..................47
Natarajan,Saravanan..........140
Natarajan,Shankar................69
Natti,Krishna.......................118
Na,Wookjin.........................108
Nayak,Raviraj......................168
Nayeri,Christian..................164
Nayfeh,Kamal.......................66
Neale,William T...................170
Neal,Joseph.......................164
Neal,Mark...........................161
Neal,Michael W...................177
Neal,Nicholas James..........118
Neam,Anthony...................134
Neely,Gary D......................152
Neff,Robert...........................89
Negandhi,Varun....................68
Negro,Sergio......................145
Negrut,Dan.........................103
Nelson,Brian.........................61
Nelson,Douglas J.....................
116, 46, 123, 149
Nelson,Edward...................133
Nelson,Jody J............... 46, 48
Nelson,Tim.........................173
Neroorkar,Kshitij.................145
Nesarikar,Anilkumar S.........110
Netter,Florian......................102
Neubauer,Jeremy S..... 65, 131
Neumann,Rainer.................170
Neves,Pedro.........................53
Nevius,Tim A......................124
Newcomb,Timothy P... 118, 129
Newell,Brittany Ann............168
Newman,Charles E.............151
Nguyen,K.............................60
Nibert,Jonathan..................123
Nichols,Gregg.......................81
Nie,Bingbing.......................161
Nielsen,Lars..........................47
Nielsen,Matthew...................45
Nie,Shida............................147
Niessen,Paul......................130
Nie,Zhigen............................99
Nigro,Eduardo......................60
Niimi,Naohisa.......................55
Niimi,Yukihide.......................48
Nikolaidis,Efstratios.. 79, 81, 84
Nilsson,Josef........................44
Ninan,Daniel.......................123
Nishida,Shin.........................72
Nishiguchi,Haruhiko............170
Nishii,Katsuyoshi..................55
Nishikawa,Ryoichi................45
Nishi,Masato......................163
Nishimura,Masanobu............53
Nishira,Hikaru.....................175
Nishiwaki,Kazuhiro..............130
Nishizawa,Toru...................153
Nisonger,Robert.................101
Nithyanandan,Karthik.........139
Nitta,Chihiro........................169
Nitta,Shigeki.........................66
Niven,Patrick C...................131
Nocera,Eduardo.................142
Nofal,Malek..........................67
Noguchi,Yasushi...................81
Nomura,Hiroshi..................119
Nomura,Yoshihiro...............140
Nonomura,Chisato.............104
Nordby,Todd.........................45
Norisada,Koji........................98
Norouzi,Mahdi......................81
Northrop,William F..... 145, 154
Northwood,Derek O.............96
Nose,Hiroyuki.....................157
Noumura,Shin....................127
Nouzawa,Takahide.............164
Nova,Isabella........................66
Novellis,Leonardo De..........168
Nozawa,Takahito................145
Ntziachristos,Leonidas... 66, 69
Nunan,John..........................69
Nusholtz,Guy S........................
164, 168, 170, 173
Nyberg,Peter................. 47, 97
O
Oakley,Jason......................118
Oberfell,Ralf..........................60
Öberg,Per...................... 47, 97
Obernesser,Philippe............140
O'Brien,Cheryl L.................104
O'Brien,Craig......................104
Ochieng,Henry.. 130, 136, 146
Ochoterena,Raúl.................161
O'Connor,Jacqueline................
119, 125, 138, 145, 154
Oda,Tatsuya.........................81
Oda,Tsutomu......................123
Odell,Marc..........................135
Oeckl,Steven......................112
Oery,Thomas......................110
Oetjens,Thomas........ 109, 112
Oettle,Nicholas...................164
Ogasawara,Toyoki................63
Ogata,Kenichiro..................116
Ogawa,Hideyuki........ 125, 130
Ogawa,Kenta.......................81
Ogawa,Yukio........................84
Ogrzewalla,Juergen............152
Oguchi,Tatsuo....................132
Ogyu,Kazutake.............. 61, 63
Ohashi,Kazuki....................173
Ohata,Akira........................156
Ohhama,Shosuke.................79
Oh,Jaegeun........................169
Ohkubo,Naoto....................175
Oh,Kwang Seok.................103
Ohno,Kazushige.... 61, 63, 163
Ohno,Kazutaka.....................96
Ohno,Nobutada..................107
Ohsaki,Kojiro......................145
Oh,Sehwun..........................79
Oh,Seungmook......... 133, 150
Oijer,Fredrik........................104
Oikawa,Shoko....................171
Ojapah,Mohammed..... 66, 147
Ojetola,Akindeji...................163
Okabe,Kazunari..................120
Okabe,Tomosaburo..................
161, 164, 172
Okada,Shuntaro...................55
Okada,Yoshihiro.................164
Okamoto,Masaaki..............123
Okamoto,Robert.................130
Okamura,Manabu...............157
Okarmus,Marcin Marek......141
Oki,Hiroshi............................59
Okrainskaya,Inina.................54
Okubo,Takahito..................152
Okumura,Dai......................107
Okushi,Kotaro....................163
Okutsu,Yasuhiko.................164
Okuyama,Hiroyuki..............161
Olatunbosun,Oluremi..........105
Olatunbosun,Oluremi
Ayotunde..........................84
Olds,Natalie M....................168
Olivi,Davide.........................134
Olmeda,Pablo.....................120
Olsson,Gunnar...................168
O'Malley,Edward.................142
O'Malley,Ryan......................72
O'Neill,Michael....................106
Onishi,Hirofumi...... 48, 53, 173
Onorati,Angelo...................127
Ono,Takayuki........................48
Ono,Tomoya.........................45
Onsy,Ahmed.........................48
Onyebueke,Landon............163
Oowaki,Kensaku................108
Opeiko,Alexandre.................80
Oppedal,A.L.......................106
Oral,Hamid Alper..................45
Orbaiz,Pedro......................140
Oreh,S. Hamed Tabatabaei.. 171
Orijuela,Cayetano Garcia......49
Orlando,Kenneth..................53
Orta,Enrique.........................85
Orton,Tia............................111
Oryoji,Kazuhiro...................149
Osada,Hideaki........... 119, 154
Osborne,Richard P.............142
Oshida,Kei..........................170
Osman,Azmi.......................147
Ostendorff,Steffen................53
Ostrander,Melvin.................103
Oswald,Kevin.....................116
Ota,Hidetake........................71
Otsuki,Yoshinori....................66
Otten,Stefan.........................45
Ottinger,Nathan A.................63
Ouellette,Patric...................134
Ouyang,Lin.........................117
Ouyang,Minggao................124
Overby,Brian.......................163
Owashi,Michiyasu...............108
Owens,Kayla......................108
Ozcelik,Gorkem..... 85, 97, 108
Ozen,Cem............................67
P
Pacella,Damiano.................124
Paczko,Günther..................120
Padmanaban,Jeya..............163
Paepe,Michel De................140
Pagonis,D.- N.....................120
Pai,Nachiket.........................68
Pak,Pak..............................141
Palai,Dibyendu............... 49, 54
Palaveev,Stefan..................125
Pal,Chinmoy.......................161
Palmieri,Fulvio.....................146
Paltrinieri,Stefano................127
Pandey,Kapil Kumar...........101
Pandey,Vijitashwa..................... 81, 81, 82, 84, 85
Pan,Jwo............ 100, 101, 104
Pan,Morgan La.....................66
Pan,Qingchuan...................117
Pan,Tsung-Yu.... 100, 100, 100
Panyam,Manjula...................79
Pan,Zhixiang.......................117
Papadimitriou,Iakovos........140
Papajewski,Jens...................45
Paredis,Christiaan.................65
Parent,Daniel......................172
Parenteau,Chantal..............173
Parivar,Amir Hossein...........143
Park,Cheolwoong...... 134, 150
Park,Chung-Kyu.................101
Parker,Donald............ 161, 163
Parker,Gordon.......................... 66, 67, 73, 73, 73
Park,Hyunmin.......................84
Park,Jae Hong...................122
Park,Jin Seo.........................47
Park,Jong-Suh.....................50
Park,June Kyu......................70
Park,Kyushik......................169
Park,Se Jin................ 163, 173
Park,Simsoo.........................69
Parks,James E.....................60
Parks,Melissa.....................101
Park,Stephen Sungsan.......126
Park,SungJin......................152
Park,Wonah........................132
Park,Yeongseop.................132
Park,Youngwon....................84
Park,Yunseo.......................150
Parotto,Marco........... 126, 148
Parrott,Kerry.......................161
Parsons,James P................122
Parsons,Jared......................60
Pascarella,Robert...............169
Paschereit,Christian............164
Pasquet,Laurent.................100
Passmore,Martin....... 164, 175
Patalak,John............. 166, 172
Patel,Nimesh......................170
Patel,Prashant....................173
Patena,Tom..........................96
Pathak,Shekhar P...............111
Patil,Kunal................... 46, 124
Patil,Sanjay S.....................151
Patil,Vijay............................101
Patkar,Aniket........................79
Patrini,Renata.......................73
Patti,Angelo..........................61
Pattie,Currell L....................163
Paul,Ciju.............................122
Paulic,Annette......................46
Paulides,Johan...................176
Paul,Jibin............................122
Paull,Nicole.........................104
Paul,Richard T......................65
Pavlovic,Zoran....................127
Payá,Jorge.................... 59, 68
Payri,Francisco...................138
Payri,Raul......... 118, 125, 136,
147, 154
Paz-Estivill,Susanna..............66
Peabody,Jason.....................69
Peckham,Mark...................147
Peddi,Sairama Narayana....168
Pednekar,Vasant.................107
Pei,Dekun...........................134
Peikenkamp,Thomas............44
Pei,Yiqiang........ 118, 132, 141
Pelkey,Jack..........................80
Pellegrini,L..........................136
Pellegrini,Leonardo...............73
Pellettiere,Joseph...............167
Pelosi,Matteo.......................96
Peltier,Edward......................72
Peng,Manlong....................108
Peng,Zhijun........................129
Pentecost,David.................170
Penumatsa,Venkata Ramana
Raju................................122
Perakes,Andreas................142
Pereira,Andre Smith..............79
Pereira,Nicolas.....................46
Perini,Federico....................132
Perng,Chin-Yuan................134
Perot,Franck.........................98
Perrot,Nicolas.....................120
Perry,Anna-Kristina.............175
Pesaran,Ahmad........... 65, 151
Pessl,Guenther.....................73
Peter,Robert.......................142
Petersen,Benjamin...................
118, 125, 132
Peters,Norbert....................120
Peterson,Andrew................102
Peterson,Daniel..................166
Peterson,Gregory...............102
Pettersson,Stefan.................65
Pettiti,Massimo...................140
Pfeil,Jürgen........................119
Pham,P.X............................145
Philipps,David.....................104
Philipp,Susanne....................69
Pianese,Cesare..................142
Pickett,Lyle.........................125
Pickett,Lyle M.....................125
Pidgeon,James....................60
Pidgeon,Philip...48, 54, 163, 91
Pien,William........................175
Pierobom,Marcio Caldeira..156
Pierre,John St.......................84
Pietron,Gregory Michael.....120
Pihl,Josh A.................... 73, 74
Pilla,Srikanth.......................107
Pillutla,Ravindranadh..... 82, 84
Pimenta,Helcio...................145
Pineault,James.....................96
Piock,Walter.......................125
Pirjola,Liisa...........................63
Pisani,Carl..........................119
Piscaglia,Federico...............127
Pischinger,Martin................152
Pischinger,Stefan......................
70, 139, 147, 157
Pisu,Pierluigi.......................152
Pitonak,Jaroslav.................135
Pitrof,Stephen M................101
Pla,Benjamin......................116
Plankensteiner,Markus..............
44, 45, 48, 50
Plant,David.........................173
Plengsaard,Chalearmpol.....127
Pless,Jason D......................63
Ploeger,Markus...................138
Plötner,Artur.......................149
P,Manoj..............................149
Poetsch,Christoph..............127
Poggiani,Claudio................140
Poggio,Luca.......................134
Poirette,Nicolas..................171
Pok,Tandy..........................111
Polcyn,Nick........................123
Polovina,Dusan...133, 142, 147
Polster,Mark.........................69
Pompetzki,Mark A..............104
Pomraning,Eric.......... 120, 140
Ponti,Fabrizio............. 120, 130
Pontoppidan,Michael..........142
Pope,Mark N........................50
Pornphaithoonsakun,Theera..71
Porter,David Bernard..... 48, 52
Porter,Scott T.....................124
Posada,Francisco.......... 59, 61
Postrioti,Lucio.....................145
Potyra,Tobias......................100
187
participant index
Powell,John........................145
Powell,Warren......................45
Powers,Michael D................63
Prabhuswamy,Shilpa............48
Praca,Mario S....................142
Pradeep................ 60, 79, 122
Prado,Jesús A........... 170, 173
Prakash,Arjun.....................133
Pramsohler,Thomas..............46
Prasad,Pradeep...................60
Prasad,Priya.......................164
Prati,Maria Vittoria......... 66, 75
Premchand,Kiran C..............71
Price,Andrew......................166
Price,Donald.........................43
Price,Kenneth S............ 59, 60
Price,Phil..............................66
Priddy,John..........................45
Priesching,Peter.................127
Prikhodko,Vitaly Y.................60
Prokrym,Yuri.......................166
Proulx,Joe............................84
Provost,Michael..................123
Prucha,Thomas..................103
Prucka,Robert Gary..................
125, 130, 131, 132, 140, 152
Przybyla,Grzegorz....... 75, 131
Przybyla,Jay.......................170
Puduppakkam,Karthik..........66
Punekar,Hemant.................149
Purdy,David..........................97
Purushothaman,Nammalwar.. 97
Q
Qiao,Xinqi PhD...................141
Qian,Yili................................45
Qi,Chang............................102
Qingnian,Wang.....................51
Qin,Jianrong.........................63
Qin,Wenxin.........................107
Qiu,Mingzhe.......................153
Qiu,Peter............................111
Qiu,Shaobo........................168
Quaiyum,Md Abdul.............147
Quan,Kaizhi........................104
Quan,Shaoping..................140
Quan,Tony............................97
Quérel,Carole.....................156
Quinlan,Neill.........................96
Quintal,Alex R.......................67
Qu,Qiuping.........................156
Qu,Wei...............................118
Qu,Xiaoyan (Susan)..............96
Qu,Yuan...................... 82, 111
R
Rababeh,Mehieddine............53
Rabba,Heiko............. 138, 147
Radavich,Paul......................72
Radermacher,Kurt Reinhard.....
59, 68, 85
Radulescu,Andrei...............157
Rafetzeder,Christoph..........156
Ragheb,Hossam.................105
Ragione,Livia Della...............75
Rahman,M.D......................145
Rahman,Sadek S.... 64, 69, 84
Raimbault,Vincent..............120
Raina,Sandeep...................101
Rajappan,Prabhavathy.........53
Rajeev,A. C...........................43
Rajesh,M... 111, 140, 142, 150
Rajkumar,Raj......................166
Raju,Mandhapati....... 133, 140
Raju,Mandhapati P..............133
Ramanathan,Subramanian.142
Rama,Pratap......................123
Ramchander,Uday..............108
Ramesh,A.............. 43, 73, 85,
116, 122, 134, 169
Ramesh,S............................43
Ramesh,VIvek....................122
Ramirez,Andres....................96
188
Ramos,Daniel
Garcia-Pozuelo...............105
Ramroth,Laurie.....................60
Ramroth,Laurie A...............152
Ramsay,Thomas N...................
162, 165, 172
Ranasinghe,Chathura.........127
Randles,Bryan....................173
Ranganathan,Raj....... 147, 154
Ran,Xu.................................96
Rao,Kanaparty.....................53
Rao,Leela.............................61
Rao,Rajesh.........................111
Rao,Sughosh J.......... 168, 169
Raphael,Elizabeth...............163
Raptis,Constantine N...............
130, 138, 145, 152
Rask,Eric................... 130, 130
Rathberger,Christian.............84
Rathinam,Balamurugan......145
Rauker,Dario.......................124
Raup,Markus......................140
Raux,Stephane.....................75
Ravaglioli,Vittorio................130
Ravet,Frederic....................145
Ravindran,Comondore (Ravi)..96
Ravishankar,S.......................74
Rawashdeh,Osamah. 138, 149
Ray,Amulya Kali..................101
Raymond,David..................173
Ra,Youngchul.....................154
Ray,Rose............................169
Razban,Ali............................67
Reader,Graham..................137
Rebba,Ramesh....................85
Receanu,Marius...................72
Redfield,Joe.........................45
Reed,Matthew........... 163, 173
Reek,Aaron..........................67
Reese,Ronald.... 131, 133, 140
Regev,Idan David...............124
Rehkopf,Jackie D........ 97, 108
Rehman,Qandeel..................54
Rehnberg,Sven...................165
Reich,Daniel.........................65
Reichenbach,Drew.............134
Reichmuth,David..................65
Reid,Alexander...................104
Reineh,Maryam Sadeghi.......96
Reinhall,Per........................124
Reinhardt,Dominik......... 47, 54
Reister,Heinrich.....................63
Reitz,Rolf D...... 125, 132, 132,
133, 136, 138, 154, 155
Re,Luigi del............ 43, 50, 71,
116, 143, 156
Rempel,Alexander..............156
Ren,Chengqin....................154
Ren,Jing.............................170
Ren,Shouxian.......................75
Renz,Stephan.......................60
Resh,William...... 101, 134, 136
Ressler,Galen.....................150
Resta,Giuseppe..................100
Reuss,David.......................118
Reuss,Hans-Christian...........50
Rew,SeungHyun...................69
Reyes-Belmonte,Miguel......120
Rezaeian,Ayyoub......... 49, 176
Ribeiro,Bernardo..................53
Ribeiro,Kamilla de Lima......119
Rice,Jonathan....................165
Richards,K. J............. 120, 140
Richardson,Charles E.........127
Richardson,Dan..................116
Richardson,Dave... 66, 81, 152
Richardson,Shane..............111
Richards,Paul............ 145, 154
Richman,Douglas.......... 96, 97
Richter,Herwig....................119
Richter,Kai..................... 47, 50
Rickeard,D.J.......................136
Rideout,Greg........................61
Ridge,Mike...........................50
Riedel,Alexander...................45
Riggs,Mark...........................81
Riley,Kathleen.......................90
Rimmer,John E.T................152
Rinaldi,Michael V..................69
Rinderknecht,Stephan........175
Ringholz,Christopher............96
Risser,Michel........................59
Ristovski,Z.D......................145
Ritter,George......................100
Riu,Delphine.......................110
Rivard,Dan..........................172
Rixecker,Georg...................157
Rizzo,Denise M........................
81, 142, 147, 156
Rizzoni,Giorgio.....................90
Robarge,Nan......................154
Roberts,Charles E.................... 63, 73, 126, 156
Roberts,Gabe.....................156
Robertson,James.................82
Robinette,Darrell.................120
Robinette,Ric......................166
Robinson,Dan.......................50
Robinson,Sam....................170
Rodrigues,Wanderson........142
Roduner,Christian A..............75
Roesems,Dirk.....................147
Roets,Piet...........................130
Rogers,Gary.......................166
Rogich,Ken.........................163
Rohs,Hans.........................126
Rojer,Chepa........................154
Rollinger,Christoph.... 138, 147
Romano,Ron......................127
Romberg,Claudia...............119
Romera,Luis Esteban.........169
Romero,Jose Antonio.........170
Romero,Vicente....................82
Ro,Minho..............................47
Romoser,Matthew R. E.......165
Romzek,Martin.............. 61, 73
Rong,Chunwei....................108
Ronkko,Topi.........................63
Rosa,Kristen G. De La..116, 123
Rose,Andrew......................119
Rose,K.D............................136
Rose,Lawrence....................45
Rose,Matthew......................60
Rose,Nathan A...................170
Rosenblatt,Deborah..............61
Rosen,Fredrik.....................161
Rosenmayr,Marc..................43
Roser,Holger.......................177
Ross,Craig.........................142
Ross,James.........................43
Rothamer,David........... 67, 118
Roth,David B..... 125, 132, 140
Roth,Gregory......................143
Roth,Kevin..........................142
Rothschuh,Matthias............147
Rousseau,Agnes..................96
Rousseau,Aymeric..... 130, 152
Royce,Michael........... 165, 172
Roy,Nantu..........................103
Ruben-Weck,Michael.........147
Rucoba,Robert...................163
Ruddle,Alastair.....................53
Ruecker,Peter.....................161
Ruehl,Martin.........................45
Ruggeri,Maria Pia.................66
Rugh,John..................... 59, 60
Ruhkamp,Ludger................147
Ruhl,Roland........................170
Ruiz,Isabel Ramirez............177
Rundell,Steven...................161
Rupp,Jeffrey.......................101
Ruschhaupt,Johannes........150
Rush,Thomas.....................170
Russell,J. Kirk............ 165, 172
Russell,Michael...................132
Russell,Robert....................123
Ruth,Michael......................140
Ruth,Richard......................173
Rutland,Christopher..................
127, 71, 145
Rutter,Brian..........................80
Ryali,Venkata........................64
Ryu,Geunsoo.....................103
Ryu,Kwan Ho.....................116
Ryu,Kyung Hyun................116
Ryu,Seunghun....................108
S
Saab,Samer.........................64
Saad,Idris.............................68
Saadi,Mohammed S...........147
Saathoff,Lee.......................118
Sabbioni,Edoardo.................99
Sabra,Maha........................153
Sabrudin,Aizad Sazrul........147
Sachsse,Joerg.....................53
Sadjadi,Seyed Omid.............50
Saeedi,Mohammadreza......132
Saeki,Hidetsugu.................164
Safty,Shady Baher El............85
Saginaw,Michael.................134
Sah,Mayur............................68
Sahoo,Dipankar..................132
Sahoo,Tapan........................65
Saisankaranarayana,Kupplili...98
Sakaguchi,Daisaku.............138
Sakaguchi,Motoyasu..........134
Sakai,Akikazu.....................157
Sakai,Kazuhiro......................55
Sakai,Masaharu....................98
Sakai,Stephen......................67
Sakai,Yasuyuki........... 132, 147
Sakamoto,Hirofumi...............63
Sakamoto,Jeff....................135
Sakellaridis,Nikolaos...........138
Sakurai,Kohei.......................43
Salaani,M. Kamel....... 168, 170
Salaani,Mohamed Kamel..........
168, 169, 170, 175, 177
Salahuddin,Asif.....................84
Salanta,Gabriel.....................63
Salehi,Rasoul......................143
Saleh,Khaled........................85
Salisbury,Shawn.................123
Salman,Nameer...127, 133, 140
Saluja,Shikher.......................55
Salunkhe,Uday.....................74
Salvi,Ashwin A............. 71, 138
Salzar,Robert Scott............167
Samadani,Ehsan................138
Samaha,Randa Radwan.....163
Samant,Sameer....................91
Samaras,Zissis........ 64, 66, 69
Samie,Farzad............ 142, 144
Sampath,Manoj Kumar.........63
Samuel,Stephen.......... 68, 153
S,Anand.............................167
Sanchez,James... 59, 130, 134
Sandhu,Jaspal........... 129, 134
Sandoff,Anders.....................65
Sandooja,Amit....................129
Sandvik,Andreas................111
Sanghvi,Pravesh.................134
Sankaran,Raghuraman
Taruvai............................110
Sankey,Jeffery W................164
Sano,Toshinari....................144
Sano,Yuki...........................134
SantaMaria,Michael..............66
Santella,Michael.......................
100, 66, 100, 100, 101
Santiago,Steven De Jesús..108
Santillán,Nadia M...............170
Santini,Danilo......... 65, 70, 130
Santis,Caterina Elena De....119
Santrock,Jeffrey..................161
Sanui,Ryoko.........................59
Sappok,Alexander......... 59, 71
Sarang,Santosh Kumar......104
Saray,Rahim Khoshbakhti.....68
Sarjovaara,Teemu...............155
Sarlashkar,Jayant V.............152
Sasaki,Shizuo.....................118
Sasaki,Takashi....................107
Sasaki,Yutaka.......................97
Sasse,Christoph.................120
Sastry,Venkat........................97
Sathyanarayana,Amardeep...50
Sato,Atsushi.......................135
Sato,Hiroki............................63
Sato,Keisuke......................152
Sato,Kenji...........................161
Sato,Satoshi.........................67
Satoshi,Kanda......................83
Sato,Shinya..........................67
Sato,Yusuke.......................147
Saunders,James................172
Saur,Genevieve.....................73
Saussol,Landry.....................50
Savaresi,Sergio...................143
Savic,Vesna..............................
79, 81, 84, 101, 112
Saville,Allan........................124
Savimaki,Auli........................63
Sawyer-Beaulieu,Susan............
59, 62, 69
Saxena,Samveg.145, 147, 154
Sayama,Mitsuru....................79
Scappin,Fabio....................154
Scarcelli,Riccardo...... 133, 134
Schall,David........................108
Schanno,Martha...................90
Schatzberger,Thorolf...........140
Schauer,Franz Xaver.. 148, 149
Schaupp,Uwe.....................119
Scheller,Michael..................149
Schenk,Charles....................59
Scheps,Randall....................97
Schernus,Christof.....................
120, 127, 129, 132, 136, 140
Scherrer,Daniel K................109
Schey,Stephen.....................45
Schiessl,Robert..................125
Schiferl,Elizabeth A.............119
Schilling,Alexander...............71
Schimpf,Nicole...................161
Schleiffer,Christian................53
Schlinkheider,Joerg............176
Schloder,Michael R.............106
Schmeisser,Volker................66
Schmidt,David....................145
Schmidt,Hanns-Joachim....164
Schmidt,Karsten...................50
Schneider,Brian..................106
Schneider,Jason.................138
Schneider,Jesse.......................
59, 123, 124, 152
Schneider,Rolf......... 47, 47, 51
Schnorbus,T.......................136
Schnorpfeil,
Stephan-Johannes..........139
Schock,Harold........... 126, 145
Schoeffmann,Wolfgang......150
Schoen,Christof....................69
Scholer,Richard..................145
Scholz,Oliver......................112
Schonlau,Benedikt.............166
Schoof,Jochen.....................43
Schori,Markus....................148
Schramm,Alex....................157
Schramm,Leander..............116
Schrank,Marc.....................101
Schratter,Markus................161
Schreyer,Johannes.............102
Schuemie,Henrik................127
Schuetzbach,Peter.............133
Schultalbers,Matthias...............
138, 148, 156
Schultz,Drew......................118
Schulz,Christof...................125
Schumacher,William...........106
Schumann,
Christian-Andreas..............83
Schumann,Martin-Andreas...83
Schwager,Mark....................43
Schwaiger,Robert...............166
Schwartz,William................130
Schwarzenthal,Dietmar.......119
Schwenn,Tony......................68
Schwitzer,Wolfgang..............47
Sciance,Fred........................61
Sciullo,Fausto Di...................59
Scott,John..........................166
S,Dominic.............................53
Sebastian,Maurice................50
Sebben,Simone......... 169, 175
Sediako,Dimitry....................96
Seethaler,Rudolf.................157
Seguin,Debra E..................165
Sehammar,Håkan.................97
Seibert,David......................152
Seidl,Andrew......................103
Seipel,Gunther....................165
Seki,Masato.......................170
Seldon,William....................142
Selke,Daniel J.....................163
Sellnau,Mark...... 130, 150, 156
Sellnau,Mark C.........................
125, 142, 150, 156
Semanson,Christopher.........50
Semel,Ronald................ 60, 71
Sementa,Paolo.. 118, 134, 150
Senecal,P. K...... 120, 133, 140
Sengoku,Koji........................48
Senocak,Ciler................ 85, 97
Sensi,Fabio.........................126
Sens,Marc..........................121
Seppi,Jeremy.....................163
Serrano,Javier Monsalve....147
Serrano,Jose Ramón..........120
Serrano,J.R........................131
Servati,Hamidb...................152
Servetto,Emanuele.............140
Severi,Elena........................132
Seybold,Lothar.....................69
Seykens,Xander.................154
Sgatti,Stefano............ 126, 148
Shabana,Ahmed A.............103
Shafee,Sina..........................68
Shaffer,Christian E..............134
Shahbakhti,Mahdi...............148
Shahlari,Arsham.................154
Shahlari,Arsham J..............154
Shamoto,Sumikazu............145
Shaner,Leonard..................101
Shanmuganathan,
Ulaganathan......................53
Shao,Shuxin.......................176
Sharma,Abhishek...............131
Sharma,Rahul.......................65
Shatara,Raed S....................44
Shaver,Gregory...................116
Shaw,Brian A........................48
Shaw,Michael L..................103
Shaw,Teo............................102
Shaw,Tim...........................102
Sheets,Alan........................134
Shelby,Michael H....... 150, 151
Sheldon,Mark.....................101
Shen,Cai............................141
Sheng,Gang.......................147
Shen,Guangyong................104
Shen,Guowu........................97
Sheng,ZiQiang....................109
Shen,Mengqin....................125
Sherif,Hany...........................74
Sherman,Michael..................69
Sherwood,Bill.....................101
Shethaji,Tushar...................140
Shetty,Shreeram.................118
Sheu,Yih-Chyun...................80
Shibagaki,Yukinari................63
Shibahara,Akihiro................144
Shibaike,Yushi....................130
Shibata,Gen.............. 125, 130
Shibuta,Takumi.....................63
Shi,Fanghui........................108
Shi,Lei..................................80
Shimada,Hiroo....................145
Shimada,Kazuaki....... 119, 154
Shi,Ming F................. 101, 112
Shimizu,Haruhiko................145
Shimizu,Hirofumi.................152
Shimoda,Masatoshi..............81
Shimoda,Takehide................63
Shimokawa,Yohei...............144
Shimoyama,Masayuki...........83
Shimozato,Yuya..................144
Shim,Wooseok...................116
Shin,Chun Woo..................110
Shinde,Satyajeet.................102
Shin,Dongho......................166
Shin,Eui Chul......................123
Shin,KiChul.........................148
Shin,Ki-Wook.......................46
Shin,Sung Kwang...............170
Shiraishi,Taisuke.................120
Shi,Simon...........................134
Shitamichi,Masafumi...........163
Shi,Tinghui.........................101
Shi,Wenku................. 129, 147
Shi,Xian....................... 63, 125
Shi,Xin................................138
Shi,Yandong.........................97
Shi,Yibing.................. 164, 168
Short,Daniel........................123
Shost,Mark.........................143
Shost,Mark A.....................125
Shuai,Shi-Jin.. 71, 139, 152, 152
Shu,Ge-Qun.................. 63, 69
Shukhman,Yuri.....................75
Shuler,Stephen...................104
Shulke,Gerald A...................96
Shutou,Yuuichi...................111
Shutty,John................... 61, 68
Shu,Yan................................73
Shyrokau,Barys..................177
Siano,Daniela.....................136
Sickle,Roger A. Van....... 59, 60
Sick,Volker..........................118
Sidhu,Anmol.............. 110, 177
Siegel,Jason.......................138
Siegmann-Hegerfeld,Tanja....73
Sienes,Eugenio de Benito...135
Sienkowski,Michael............104
Si,Jianyu.............................127
Sikder,Arun Kumar.............104
Sileghem,Louis.......... 127, 150
Silva,Davi............................142
Silva,Fernanda Oliveira.......119
Silva,Gabriel da..................132
Silva,Joao H.........................45
SILVA,Philippe DA...............100
Silver,Ronald.................. 59, 60
Silvestri,John J...................140
Silvis,William.........................66
Simescu,Stefan........................
118, 125, 126, 136
Simmons,Amber.................107
Simon,Nakia.................. 59, 65
Sims-Williams,David...........164
Singh,Amandeep......................
81, 85, 168, 170, 175, 177
Singh,Ashish........................73
Singh,Ashish Kumar...........123
Singh,Gurhari Preet............116
Singh,Jai P..........................171
Singh,Jatinder P.................101
Singh,Jugraj.......................109
Singh,Kanwar.....................175
Singh,Kanwerdip................136
Singh,Navtej.........................60
Singh,Nil Kanth...................151
Singh,Nishant.......................63
Singh,Pritpal.......................101
Singh,Tejinder.....................150
Sinha,Abhimanyu................118
Sinnamon,James....... 125, 130
Sinz,Wolfgang....................135
Sisk,Brian.......... 139, 152, 153
Sisken,Kevin D.....................73
Sivalingam,Murugan...........155
Sivaramakrishnan,Srikanth..168
Sivasankaran,Sadasivam......98
Sivencrona,Hakan................50
Skrzycke,Ted......................120
Skugor,Branimir..................139
Škugor,Branimir..................139
Skwarek,Volker.....................46
Slezak,Lee..........................130
Sloss,Clayton.......................97
Sluder,C. Scott............ 71, 133
Smallbone,Andrew.............124
Smart,John...........................45
Smith,Alastair.....................146
Smith,Brett.........................100
Smith,David E........ 72, 73, 147
Smith,George.......................85
Smith,James E....134, 142, 150
Smith,Kandler.....................151
Smith,Kevin..........................79
Smith,Les...........................131
Smith,Lorenzo........... 112, 112
Smith,Michael Andrew..........66
Smith,Patrick......................130
Smith,Peter..........................59
Smithson,Robert A.... 142, 144
Smith,William..... 130, 138, 153
Smits,Jeroen......................154
Snyder,Kevin L...................123
Sochaczewski,Rafal............145
Sochor,Mark R...................167
Soeiro,Luiz.........................152
Sogbesan,
Oluwasujibomi M.............118
Sohn,Chang Hee................110
Sohn,Kyoungju...................102
Sokusai,Hidetoshi...............163
Solaka,Hadeel....................136
Soliman,Ahmed..................133
Soliman,Aref M.A................107
Soloiu,Valentin... 130, 136, 146
Somandepalli,Vijay..............150
Somers,Bart.............. 125, 133
Somers,L.M.T............ 154, 155
Som,Sibendu.... 120, 133, 140
Sonavane,Tejas..................152
Sonchal,Chirag.....................47
Soner,Murathan.. 97, 85, 98, 108
Song,Chiwoong..................153
Song,Guangtian Gavin.............
97, 107, 110
Song,Han Ho.....................132
Song,Kang.........................148
Song,Qingyuan.....................73
Song,Xiaobo............ 66, 67, 73
Sonntag,Hans-Dieter............47
Sonobe,Osamu..................109
Sorniotti,Aldo......................168
Sorusbay,Cem......................90
Sotton,Julien......................142
Sousa,Diogo.........................61
Souza,Urban De.................107
Sovani,Sandeep.................164
Sovran,Gino.......................162
Spakowski,Joseph G.........126
Spegar,Timothy D...............126
Spence,Pete.......................172
Spengler,Carsten..................64
Spessa,Ezio........................130
Spicher,Ulrich.... 119, 125, 157
Spiekermann,Peter.............125
Spigno,Ciro..........................59
Spillane,Keely A....................54
Spivey,Heath......................173
Splitter,Derek............. 132, 154
Spurgeon,Diana Kay...........164
Sreedhara,S.......................123
Srikantan,Sridhar................104
Srinivasan,Kumar..... 63, 64, 68
Srinivasa,Prasad...................47
Srivastava,Dhananjay..........156
Srivastava,Nilabh.. 116, 123, 130
Srivastava,Shalabh.............145
S,Shashank........................167
Stadlbauer,Stephan..... 71, 156
Stadler,Michael...................135
Stahl,Douglas.....................161
Stalhammar,Per..................135
Stanger,Thomas...................50
Stankewich,Charles J.........173
Stanko,William....................168
Stanton,Scott.....................138
Stefanopoulou,Anna...........138
Steffan,Hermann................135
Steffen,Thomas........... 45, 123
Steffka,Mark.........................50
Steffke,Karl William...... 59, 151
Steimle,Florian....................119
Stein,Antoinette W................66
Steinberger,Markus.............122
Steinbuch,Maarten.............154
Steiner,John C....................173
Stein,Jeffrey........................138
Stein,Joshua......................142
Stein,Robert A....................151
Stenlaas,Ola.......................156
Stephens,Craig.....................50
Stephens,Thomas................65
Sterken,Lennert..................175
Sterniak,Jeff.............. 133, 147
Stettinger,Georg...................50
Stevanovic,S......................145
Stevens,Andrew...................73
Stevens,Matthew..................54
Stewart,Nathan..................138
Stierand,Ingo........................45
Stobart,Richard K......... 61, 91,
123, 124, 136, 147, 152
Stoeber-Schmidt,
Claude-Pascal.................136
Stola,Federico....................120
Stone,Richard.......................66
Storey,John..........................71
Stoughton,Thomas.............112
Stout,David....... 90, 90, 90, 90
Strangfeld,Christoph...........164
Strauss,Mark......................170
Strecker,Bryan......................70
Streltsov,Viatcheslav...........145
Stroh,Christoph M................84
Strong,Richard...................145
Stroud,Richard S..................44
Strzelec,Andrea........................
59, 60, 63, 69, 145, 154
Stuart,Charles....................134
Studzinski,William...............132
Stuermer,Ingo.......................48
Stutenberg,Kevin................130
Styer,Jeremy.......................118
Styles,Daniel J......................71
Suard,Frédéric....................110
Subash,GP.........................140
Subramaniyam,Murali..163, 173
Suck,Gerrit...........................64
Suerken,Marion....................44
Sugimoto,Hideki...................48
Sugitachi,Eiji.......................120
Sugiyama,Yoshitaka.............50
Suh,Il hong...........................47
Sukumaran,Sujith...............146
Sukumar,Balaji......... 63, 71, 73
Suleiman,Ahmed..................96
Sullivan,John........................69
Suna,Bhagyashree.............155
Sunaga,Yoshihiro................145
Sundaram,Padma................44
Sundaram,Sudharsan...........54
Sundararaman,Saikrishna...110
Sung,Dae-Un.....................110
Sun,Harold................ 130, 138
Sun,Jiafeng........................132
Sun,Li.................................112
Sun,Lu......................... 71, 135
Sun,Min..............................111
Sun,Ming............................156
Sun,Richard..........................84
Sun,Shaohua......................134
Sunwoo,Myoungho............132
Sun,Xichen.................. 96, 103
Sun,Xin...............................104
Sun,Yannan..........................73
Sun,Zongxuan....................131
Supke,Joerg.........................48
Surenahalli,Harsha Shankar......
66, 73
Suresh,Arvind.....................140
Sutherland,Barry...................90
Sutjiono,Raymond................75
Sutton,Mike........................118
Su,Wanhua........ 118, 132, 141
Suway,Jeffrey.... 166, 167, 171
Su,Xuming..........................110
Su,Zheng-Ming.......... 100, 100
Suzuki,Kunihiko..................143
Suzuki,Nobuo.....................135
Suzuki,Nozomu..................111
Svanberg,Bo......................163
Svancara,Kamil.....................45
Svensson,Robert................165
Swaminathan,Ganesan.........47
Swanson,Jacob....................70
Swiler,Laura..........................82
Switkes,Joshua..................143
Syed,Parvez.......................109
Szailer,Tamas........................67
Szczotka,Andrzej......... 71, 152
Szczudlak,Jacob................111
Szente,Joseph........ 66, 67, 69
Szeto,Kevin........................125
Szlachetka,Marcin..............145
Szpytman,John...134, 142, 150
Szybist,James P.......................
125, 132, 140, 148
Szymkowicz,Patrick....... 60, 61
T
Tabatabaei,Hamidreza........139
Tabei,Koichi..........................73
Tabuchi,Yuichiro..................123
Tada,Takuya.......................147
Tadjine,Hadj Hamma..........166
Taeibi-Rahni,Mohammad....139
Taguchi,Katsushi..................66
Taguchi,Takeshi..................145
Taheri,Saied............... 168, 175
Tai,Peter...............................73
Tajima,Hiroshi.....................138
Takabayashi,Masaru...........150
Takada,Hiroaki......................53
Takahashi,Atsushi...............120
Takahashi,Kenichiro............169
Takahashi,Masanori............147
Takahashi,Masashi.............150
Takahashi,Tadanobu...........145
Takahashi,Yoshihiko............170
Takahashi,Yuzo...................101
Takao,Yuki............................84
Takasaki,Akira.....................145
Takasu,Yusuke....................129
Takemasa,Koichiro...............65
Takeno,Kazuki......................84
Takeuchi,Hiroaki.................145
Takeuchi,Shinji....................120
Takeuchi,Yasuhiro...............144
Takiguchi,Takashi..................81
Takikita,Mamoru.................152
Takizawa,Daijiro..................145
Talamonti,Walter.................170
Talon,Vincent.. 50, 121, 139, 143
Talukdar,Saurav....................97
Tamor,Michael A...................65
Tamura,Yohsuke.................161
Tanahashi,Toshio................127
Tanaka,Eitaro......................127
Tanaka,Hideyuki.................130
189
participant index
Tanaka,Masamichi................59
Tanaka,Masashi..................145
Tan,Cheng..........................152
Tan,Chin-An........................153
Tandy,Donald F...................169
Tang,Gang................... 98, 108
Tang,Hui...............................83
Tang,Qijun..........................142
Tang,Tom Hong-Zhi............118
Tang,Weiyong.......................66
Tani,Toshihiro......................129
Tan,Julian.............................63
Tanner,Charles....................167
Tao,Xian................................84
Taraza,Dinu.........................130
Tarnutzer,Stephan.................48
Tartakovsky,Leonid...............75
Tate,James...........................75
Tateyama,Hiroyuki................81
Tatschl,Reinhard.................127
Tatsu,Kaoru........................164
Tatur,Marek.............. 47, 59, 60
Taube,Arnold........................49
Tavakoli,Massoud.................91
Tavernier,Stephane.............145
Tayal,Prateek........................75
Taylor,Darryl S.....................110
Taylor,Don...........................172
Taylor,James.......................140
Taylor,William................. 46, 48
Teener,Michael David Johas...53
Tekin,Erdoan.........................98
Temkin,Mike.......................110
Teng,Ho............... 59, 138, 150
Teng,Yu J................ 81, 83, 84
Tennison,Paul................ 67, 74
Teraji,Atsushi............. 120, 153
Ternel,Cyprien.....................142
Thaden,Eike.........................45
Thakur,Pawan.....................149
Thanthry,Sreedhar................54
Theil,Martin.........................129
Thek,Norbert........................50
Theobald,Mark A......................
130, 138, 145, 152
Theotokatos,G....................120
Thibault,Francis..................111
Thibault,Laurent..................138
Thiriot,Julien.......................142
Thokala,Sarin Babu............109
Tholiya,Nishant.....................54
Thomas,Christopher P..........60
Thomas,Jai...........................81
Thomas,Jean-Sébastien.......69
Thomas,John...... 116, 60, 140
Thomas,Scott D.................173
Thomas,Vincent...................50
Thom,Gerald......................134
Thompson,James.................66
Thompson,Mark.................164
Thompson,Patrick................90
Thompson,Peter.................170
Thomson,Steve......... 120, 120
Thornhill,David......................66
Thornton,Dana E................165
Thornton,Matthew......... 59, 60
Thrush,Steven....................108
Thulin,Niklas.........................65
Thyagarajan,Ravi................101
Tian,Dong-lian......................71
Tian,Hua...............................63
Tian,Hua...............................63
Tian,Jianyi..........................152
Tibbett,Jeremy.....................43
Tiberi,Alessandro....... 127, 140
Tijerina,Louis......................170
Tikkanen,Juha......................66
Tillock,Brad R.....................136
Timmons,Adam..................151
Timoney,David....................153
Tinskey,Michael....................65
Tiseira,Andres............ 120, 142
Tissler,Arno...........................60
190
Tittmann,Claudia..................83
Tiwari,Ashish......................149
Tjong,Jimi.......... 133, 137, 139
Tkacik,Peter Thomas..........172
Togay,Alper...........................98
Toglia,Angelo......................170
Tohyama,Mamoru...............125
Tokgonul,Seray Goksel.. 97, 108
Tokuda,Shigefumi.................81
Tomazic,Dean.............. 47, 140
Tomforde,Michael...............156
Tominaga,Hiroyuki..............129
Tominaga,Yuki............. 65, 129
Tomita,Mitsuaki...................144
Tomita,Yoshiki.......................96
Tonda,Richard Dale... 107, 177
Tonge,Gajanan...................101
Toops,Todd................... 60, 69
Topper,Tim...........................97
Torigaki,Toshikazu...............163
Tornatore,Cinzia......... 131, 150
Torregrosa-Jaime,
Bárbara...................... 59, 68
Torres,Ednildo.....................145
Torres,Felipe.......................145
Toso,Alessandro.................147
Toulson,Elisa...... 116, 123, 130
Tovar,Andres.......................102
Toyoda,Shinya....................144
Tragsdorf,Carsten...............105
Tramecon,Alain...................173
Trampler,Joerg....................120
Trawczynski,Dawid...............45
Tree,Dale R........ 118, 125, 136
Tremlett,Anthony..................97
Tribotté,Pascal....................142
Trimble,Stephen.................134
Tripathi,Adya.......................143
Tronconi,Enrico.....................66
Truedsson,Ida.....................154
Truffin,Karine.......................142
Truskin,James....................108
Tsang,Chi-Wei....................145
Tsoi,Ada.............................173
Tsolakis,Athanasios....... 60, 71
Tsou,Poyu................... 45, 130
Tsubokura,Makoto..............164
Tsuchiya,Kentaro................132
Tsuiki,Toyomori...................143
Tsuji,Hideo..........................111
Tsurumaki,Maumi...............152
Tsurutani,Taisuke..................65
Tucci-Piergiovanni,Sara........47
Tumelaire,Charles-Francois.. 142
Tuner,Martin..............................
125, 126, 136, 147, 154
Tunestal,Per..132, 134, 136, 156
Tuo,Hanfei............................73
Tuplin,Simon.......................175
Tu,PoWen...........................139
Turano,Marcella....................79
Turner,James W G..... 118, 125
Tuteja,Arjun D............ 130, 138
Twigg,Martyn........................70
Tyan,Tau............ 100, 101, 104
Tyson,John................ 112, 112
Tzamkiozis,Theodoros..........63
U
Uchida,Noboru.......... 119, 154
Uchida,Thomas......... 175, 177
Uchida,Tsubasa....................65
Uchino,Takeshi...................144
Ueda,Daiji...........................138
Ueda,Koichi..........................43
Ueda,Matsuei.....................129
Uehara,Naohisa..................152
Uehara,Samantha...............142
Ueki,Hironobu.....................138
Ueno,Masaki......................135
Ueno,Masayuki...................175
Uesugi,Tokuteru..................106
Ughetta,Valerie.....................67
Ukaew,Ananchai...................46
Umeda,Atsushi...................145
Umer,Saad.........................127
Unarski,Jan........................165
Unger,Michiel......................174
Uno,Hitoshi.........................172
Uppuluri,Sudhi......................84
Urbina,Angel.........................82
Ursu,Chandrakantha............55
Urushihara,Masaru.............107
Ushijima,Hirooki..................130
Ushioda,Kohsaku...............101
Utaka,Ryosuke...................145
Uthayasuriyan,Arees...........163
Utsunomiya,Yamato............152
Uzunsoy,Deniz............. 96, 110
Uzunsoy,Erdem........... 97, 110
V
Vagg,Christopher................145
Vaglieco,Bianca Maria..............
118, 134, 138, 150, 155
Vahlensieck,Bernd..............150
Vala,Marilyn........................163
Valentino,Gerardo.. 131, 136, 150
Valentino,Ryan....................154
Valero,Francisco.................176
Vancoillie,Jeroen........ 127, 150
Vandiver,Wesley..................173
Vantsevich,Vladimir V..........175
Varble,Daniel L...................125
Varrier,Sébastien.................173
Vartolas,Florina...................106
Vasconcellos,M.A.Z..... 62, 110
Vasile,Carmen......................59
Vazirian,Mohammadmohsen.. 131
Vdovin,Alexey.....................168
Ved,Chintan........................129
Vedula,Ravi.........................126
Veeramani,K.......................149
Veinblat,Mark........................75
Velaers,Adrian James.130, 146
Velardocchia,Mauro............174
Venhovens,Paul... 79, 152, 163
Venkatesha.................. 84, 110
Venkatraman,Hariharan........79
Venson,Travis.......................60
Vent,Guido...........................69
Venturi,Massimo...................65
Venugopal,Rishikesh.................
118, 125, 136
Verhelst,Sebastian.... 127, 139,
140, 150, 155
Verma,Mukul K...................164
Verma,Ravi.........................109
Vermeulen,Jerrie.................130
Vernacchia,Mark A...............49
Verschaeren,Roel................139
Vianna,Marcela Esteves......156
Vibhanshu,Vipul........... 73, 123
Vickerman,Richard.... 118, 129
Vidal,Fabrice.......................142
Vidye,Anil............................173
Viera,Juan..........................154
Vigliani,Alessandro..............174
Viitanen,Arto.........................63
Vikraman,V.........................110
Villaire,Mark............... 103, 111
Villela,Mark.........................123
Vinter,Jonny..........................44
Vint,Matti........... 142, 147, 156
Vitek,Oldrich...... 127, 127, 138
Vitkin,Lev..............................45
Vlachos,Theodoros.............145
Vlcek,Brian........ 130, 136, 146
Vogel,Volker........................142
Vogt,Claus............................63
Vohra,Varun..........................73
Voitel,Tilo............................170
Völkl,Timo...........................166
Vossoughi,Gholam Reza.....143
Vrsek,Gary..........................106
Vu,Diep...............................123
Vuk,Carl..............................150
Vuorinen,Ville......................155
Vuuren,Nic van.....................63
Vyas,Anant...........................65
Vythilingam,Karunaharan....116
Vytla,Veera Venkata Sunil..........
101, 102
W
Wachtmeister,Georg.................
148, 149, 153
Wach,Wojciech...................166
Wada,Koichi.........................98
Waeltermann,Peter...............45
Wagner,John R............................
48, 54, 147, 163, 91
Wagner,Robert M.....................
60, 132, 133, 154
Wagner,Timothy.................177
Wågström,Linus.................172
Wahba,Ronny.... 166, 167, 171
Waikar,Rahul.......................107
Wakisaka,Yoshifumi............140
Walker,Andrew P............ 59, 60
Walker,Francis J.................129
Walker,N. Ryan.. 132, 138, 155
Walker,Paul................ 138, 153
Walker,Rodney...................127
Walker,Thomas.....................63
Walker,Tim..........................175
Wallace,Rick S...................168
Wallington,Timothy J... 65, 151
Wallner,Thomas........................
123, 123, 134, 140
Walls,Mark..........................126
Walsh,Patrick M........ 116, 123
Walter,Bruno.......................136
Walter,Christoph...................72
Walter,Joel................. 175, 176
Walworth,Bradley...............110
Wanderer,John...................164
Wang,Changqing................169
Wang,Chao-Yang...... 123, 134
Wang,Chen........................112
Wang,Chongming...............150
Wang,Chunxue...................169
Wang,Congyue...................104
Wang,Danwei.....................177
Wang,Dawei.......................169
Wang,Dengfeng..................147
Wang,H..............................145
Wang,Hailin........................147
Wang,Honglu......................101
Wang,Houmin.....................112
Wang,Hua..........................118
Wang,Jenne-Tai..................168
Wang,Jian-hai.......................71
Wang,Jianxin............. 118, 154
Wang,Jian-Xin......................71
Wang,Jin............................125
Wang,Lei..................... 98, 108
Wang,Li..............................112
Wang,Liang........................107
Wang,Lifu.................. 173, 177
Wang,Lijuan..........................97
Wang,Meiping....................137
Wang,Meng........................103
Wang,Michael................ 69, 70
Wang,Mingjie......................133
Wang,Pengxiang................104
Wang,P.T............................106
Wang,Qigui.........................103
Wang,Qingdang.................118
Wang,Qinpeng.....................65
Wang,Shichao....................147
Wang,Shu................. 130, 131
Wang,Stewart.....................173
Wang,Thomas..........................
134, 138, 150, 152
Wang,Wenjing......................84
Wang,Wenping...................128
Wang,Xiaolei.........................98
Wang,Xiaoyong..................147
Wang,Xin.. 71, 75, 118, 130, 154
Wang,Xing..........................154
Wang,Xinyan......................148
Wang,Yi..............................137
Wang,Yiheng........................98
Wang,Yong................ 147, 161
Wang,Yucong...........................
107, 108, 110, 110
Wang,Yuesen.......................69
Wang,Yue-Yun... 116, 123, 130
Wang,Yujun................... 59, 71
Wang,Yuwei........................109
Wang,Zhengzhong...... 98, 108
Wang,Zhi............................154
Wang,Zhonglai.....................81
Wang,Zihan........................133
Wanninger,Klaus...................60
Wan,Ying..............................99
Wan,Yu...............................150
Warburton,Alan...................123
Ward,David...........................53
Ward,Jacob..........................97
Warey,Alok..................... 60, 61
Warnberg,Jonas.................118
Warner,Jim...........................60
Warth,Marco...... 140, 142, 145
Wasacz,Bryon... 134, 142, 150
Waschl,Harald...71, 116, 143, 156
Watanabe,Masamichi.........120
Watanabe,Masashi...............73
Watanabe,Osamu...............135
Watanabe,Satoshi..............135
Watanabe,Yasuharu............152
Watarai,Yoma.......................45
Watkins,Brad........................71
Watkins,Simon...................164
Watling,Timothy C................63
Watson,David.......................66
Watts,Matthew.....................83
Watzenig,Daniel........... 48, 161
Wawzyniak,Markus...............72
Weaver,Brian......................161
Weaver,Jabeous...130, 136, 146
Webb,Cynthia.......................67
Webb,Jeffrey......................101
Weber,Marcus....................140
Weber,Paul R.....................173
Webster,Kenneth W..............50
Weerappuli,Para.................168
Weibel,Michel.......................66
Weidmann,Ernst Peter..........63
Weigert,Erich........................60
Wei,HaiQiao..........................63
Weimerskirch,André..............53
Weiss,David........................103
Weiss,Joachim...................140
Wei,Tseng...........................100
Wei,Zhigang.............................
80, 81, 60, 96, 105, 107, 110
Welge,H. Robert (Bob).. 165, 172
Wells,Allan..........................134
Welsh,Kevin........................166
Wendeker,Miroslaw............145
Wendling,Scott Michael........43
Wenig,Markus....................127
Wen,Shao..........................156
Wensing,Michael....... 125, 155
Wenzel,Wolfgang..................61
Wereszczak,Andrew A..........60
Weslati,Faz.........................127
Wesskamp,Patrick..............134
Wessling,Justus....................60
West,Brian H............................
60, 116, 132, 133, 140
Westbrook,James Robert...156
Westphal,Rodrigo...............142
West,Todd H........................65
Wetzel,Philip.......................130
Wheeler,Jennifer.133, 142, 147
Whelan,Ian.........................153
Whikehart,J. William.............44
White,Eli.............. 46, 116, 123
White,John A........................97
White,Timothy....................172
Whitehead,Glenn..... 80, 82, 84
Widdecke,Nils......................63
Wiedemann,Jochen..............63
Wiehagen,Norbert................47
Wie,Sa-Heun......................152
Wieser,Dirk.........................164
Wiggs,Gene.........................80
Wiik,Richard A....................173
Wijewardane,Anusha............61
Wikander,Jan......................139
Wilcutts,Mark.....................143
Wilfinger,Erich L..................129
Wilhelm,Christian..................45
Wilke,Joshua......................116
Wilken,Celeste....................130
Wilkinson,Craig...................173
Willems,Frank.............. 67, 154
Willems,Werner..................132
William,Ruona......................74
Williams,Aaron......................60
Williams,Andrew M...............60
Williams,Daniel...................170
Williams,Ian..........................84
Williamson,Rodney.............123
Williams,Rod......................146
Williams,Sherry...................116
Williamsson,Jon....................65
Willis,Angela.......................127
Wilstermann,Hartung..........161
Wimmer,Peter.....................161
Winkler,Sandra.....................65
Winner,Hermann........ 165, 166
Winsor,Richard...................118
Winward,Edward................124
Wiseman,Michael S..............96
Wishart,Jeffrey....................152
Wissink,Martin........... 132, 154
Witrant,Emmanuel..... 121, 143
Wittek,Karsten....................140
Wohlecker,Roland...............104
Wohlfarth,Enrico...................60
Wohlgemuth,Sebastian.......153
Wolfe,Alexander...................45
Wolfe,Carole M...................104
Wolfe,Christopher.................84
Wolf,Marko...........................53
Wolf,René...........................136
Wolf,Rory............................110
Wolleschensky,Lars..............53
Wolpert,Dieter....................161
Wong,Victor.................. 59, 71
Woodburn,Joseph....... 71, 152
Wood,Eric................. 131, 151
Woods,Robert L...................90
Woo,Hayong......................170
Woolard,Christopher...........146
Wooldridge,Margaret................
118, 140, 141
Wooldridge,Steven.............118
Worm,Jeremy............ 130, 162
Worswick,Michael J..................
101, 109, 112
Woszidlo,Rene...................164
Wozniak,Ernest....................47
Wright,Daniel G..................104
Wright,John F.... 118, 125, 136
Wright,Yuri M......................146
Wu,Binyang........................141
Wu,Chien Hsun..................152
Wu,Guang......... 147, 171, 177
Wu,Guangming......... 129, 147
Wu,Guangqiang.................127
Wu,Haibo...........................162
Wu,Haotian..........................45
Wu,Jinglai........ 80, 82, 98, 108
Wunsch,Rolf.........................69
Wurden,Richard..................116
Wurzenberger,Johann C.....140
Wu,Shen..................... 82, 111
Wuttke,Heinz-Dietrich...........53
Wu,Wenguang........... 171, 177
Wu,Xiaomin........................116
Wu,Xijia................................97
Wu,Yinchong......................147
Wu,Zhengxin......................169
Wu,Zhijun.................... 63, 154
Wyatt,David W......................75
X
Xavier,Eduardo...................142
Xia,Cedric...........................112
Xiao,Baitao................ 130, 131
Xiao,Ling..............................64
Xiao,Xinran..134, 138, 150, 152
Xia,Yong.............................161
Xie,Hui................................148
Xie,Liyan.............................148
Xie,Long...............................50
Xie,MaoZhao......................128
Xie,Xiaomin...........................69
Xie,Xin......................... 84, 112
Xinpeng,Tang........................51
Xiong,Lu.................... 169, 171
Xiong,Qingang....................125
Xi,Yuanzhou..........................63
Xi,Yubin..............................163
Xi,Zhimin...............................85
Xu,Bing.................................63
Xu,Guangzhong..................177
Xu,Guoyan.................. 49, 177
Xu,Henry............................163
Xu,Hongming..... 60, 139, 145,
147, 150, 152, 154
Xu,Hui..................................75
Xu,Lan................................168
Xu,Liangfei..........................124
Xu,Min................................154
Xu,Nan................ 84, 112, 112
Xu,Peijun..................... 96, 107
Xu,Wenkai..................... 98, 99
Xu,Zhengxin.......................154
Y
Yadav,Anil.............................65
Yadav,Vivek H.....................110
Yagi,Eisuke...........................96
Yahaba,Takanori...................79
Yalamanchili,Krishnarao
Venkata...........................168
Yamada,Atsushi....................72
Yamada,Hiroyuki...................67
Yamada,Keiji.........................63
Yamada,Kenichi..................123
Yamada,Masaki..................152
Yamaguchi,Akira.................172
Yamaguchi,Takuya..............154
Yamakawa,Takashi...............61
Yamamoto,Masago............116
Yamamoto,Masashi............138
Yamanaka,Hisamitsu............43
Yamane,Yoshio.....................43
Yamasaki,Masaru.................50
Yamasaki,Yudai......... 148, 149
Yamashita,Katsuhisa...........104
Yamazaki,Yasuo..................152
Yanagimoto,Kazuo.............164
Yanagisawa,Nagao.............134
Yanai,Kenichi........................55
Yanakiev,Diana...................120
Yanaoka,Toshiyuki..............173
Yan,Fengjun....... 116, 123, 130
Yang,Ce.............................138
Yang,Cheng........................134
Yang,Dong................ 116, 117
Yang,Fan..............................69
Yang,Fulun..80, 81, 60, 96, 105
Yang,Fuyuan.......................124
Yang,Heeseung....................84
Yang,James........................107
Yang,Jing...........................137
Yang,Jingzhou James.........107
Yang,Kang............................69
Yang,King H.......................163
Yang,Lianxiang............ 84, 112
Yang,Nicholas.....................161
Yang,Qingmin............ 107, 110
Yang,Ren-Jye.......... 80, 85, 85
Yang,Song-Lin......................71
Yang,Wenming.....................68
Yang,Xiaobo................ 97, 104
Yang,Xiaofeng.....................127
Yang,Xiaoguang..................105
Yang,Xiaojian..... 116, 123, 130
Yang,Xing...........................116
Yang,Yi...............................132
Yang,Yonghong....................69
Yang,Zhijia................. 123, 124
Yao,Chi-Chun.....................170
Yao,Mingfa.........................130
Yao,Qimin (Jimmy)................54
Yassine,Mahmoud K...... 61, 66
Yasuda,Eiichi......................107
Yasuo,Ohashi.......................83
Yay,Kubilay...........................70
Yayla,Yasin............................67
Yay,Suna Erses.....................70
Yee,Kingman........................53
Yeliana,Yeliana....................130
Yen,Joseph........................176
Yeo,Ki Ho...........................123
Yeom,Myungki....................169
Yeow,Kim F.......... 59, 138, 150
Ye,Tao..................................68
Yetkin,Argun.........................60
Ye,Wanhua.........................135
Yezerets,Aleksey..60, 60, 66, 73
Yi,Jianwen.......... 118, 74, 125,
130, 138
Yi,Kyongsu...103, 104, 147, 166
Yildiz,Selcuk.........................98
Yilmaz,Fatih..........................67
Yilmaz,Hakan............ 133, 147
Yin,Xiaofeng.......................128
YI,Seyoung.........................123
Yi,Yong.............. 118, 125, 136
Yohata,Hironori...................132
Yokoyama,Hajime...............120
Yokoyama,Naoki...................72
Yonak,Serdar............. 145, 152
Yonekawa,Akiyuki...............135
Yoo,Jaimoo........................123
Yoo,Kyungho......................170
Yoon,Hwan-Sik...................127
Yoon,Junseok.....................148
Yoon,Seungsuk..................123
Yoon,Sungyun......................84
Yoon,Yeogiel.............. 104, 147
Yoon,Yonghoon..................108
Yoon,Yong-San...................153
Yoo,Seungbeom...................63
Yorinaga,Muneo.................144
Yoshida,Michio.....................43
Yoshida,Naoaki...................120
Yoshida,Naohito.................135
Yoshida,Takahiko..................55
Yoshii,Kenta........................134
Yoshijima,Kazuya................123
Yoshimaru,Kiyotaka............119
Yoshino,Fernando Jun........154
Youngren,Dave.....................66
Young,Stefan........................73
Younkins,Matthew..... 140, 141
Youssef,Bilal.........................55
Yuan,Chris............................69
Yuan,Yinnan.......................122
Yu,Chao.................... 118, 154
Yue,Xiaowei........................153
Yueyuan,Wei.......................153
Yu,Guopeng.........................63
Yu,Hai.................................138
Yu,Hao.............. 118, 141, 154
Yuichi,Katayama...................71
Yu,Jingzhou........................155
Yu,Jun................................132
Yu,Kai.................................177
Yukio,Osawa........................71
Yu,Linxiao.............................75
Yu,Mengjin..........................156
Yun,Seungjae............ 103, 147
Yu,Seongeun......................123
Yuuki,Kazuya........................63
Yu,Wenbin......... 118, 132, 154
Yu,Xin.................................137
Yu,Zerong...................... 45, 46
Yu,Zhuoping.............. 169, 171
Z
Zacharakis-Jutz,George.....116
Zacharia,Nicole.....................63
Zachos,Mark........................53
Zagorski,Scott....................177
Zalewski,Janusz...................45
Zalucha,Paul.........................85
Zamboni,Giorgio...................66
Zannikos,Fanourios............131
Zaremba,Alexander............138
Zarrin-Ghalami,Touhid.........104
Zarringhalam,Reza....... 49, 176
Zarvalis,Dimitrios..................59
Zaseck,Kevin......................151
Zdrodowski,Rob.................141
Zehetner,Josef......................50
Zeller,Marc............................46
Zellner,John W....................172
Zeng,Dan...........................112
Zeng,Huabing.....................135
Zeng,Ke...................... 71, 135
Zeng,Nancy........................104
Zeng,Wei............................154
Zeng,Xiaohua.......................51
Zeng,Yangbing...................135
Zerod,Richard.......................50
Zha,Kan..............................137
Zhang,Anqi................ 124, 156
Zhang,Bo................ 80, 82, 84
Zhang,Chunhui...................118
Zhang,Daming............. 97, 139
Zhang,Fan............................71
Zhang,Gaoming..................154
Zhang,Haiyan.......................45
Zhang,Jiaxiang...................116
Zhang,Jizhong....................138
Zhang,Junyuan...................168
Zhang,Junzhi......................153
Zhang,Kai...........................131
Zhang,Lin.................. 103, 125
Zhang,Linbo.........................82
Zhang,Ling.........................112
Zhang,Mengyang.................65
Zhang,Ming...97, 134, 139, 154
Zhang,Nan...........................97
Zhang,Nong.. 138, 173, 177, 153
Zhang,Peng............... 173, 177
Zhang,Qi........... 124, 153, 156
Zhang,Qingning..................131
Zhang,Renlin......................125
Zhang,Ruifeng....................174
Zhang,Tingting.....................69
Zhang,Wei................. 100, 153
Zhang,Weidong..................104
Zhang,Weiguo......................97
Zhang,Xiaogang............ 67, 74
Zhang,Xin.............................96
Zhang,Xing................ 147, 169
Zhang,Yan............. 45, 66, 147
Zhang,Yi.............................111
Zhang,Yingchao.................176
Zhang,Yingjia......................124
Zhang,Yipeng.....................177
Zhang,Yizhou.....................118
Zhang,Yunhai.....................156
Zhang,Yunqing..80, 82, 98, 108
Zhang,Yuyin........................154
Zhang,Zexing.....................169
Zhang,Zhe..........................176
Zhang,Zheming..................134
Zhang,Zhenli.............. 152, 153
Zhang,Zhixiong...................137
Zhang,Zhiyong...................118
Zhan,Wenzhang.................153
Zhan,Zhangsong................142
Zhan,Zhenfei........................85
Zhao,Ben...........................138
Zhao,Dezong......................147
Zhao,Feiyang......................132
Zhao,Han.................... 98, 108
Zhao,Hua............ 66, 147, 148
Zhao,Wei............................134
Zhao,Weibo........................118
Zhao,Xianyang....................174
Zhao,Youmei......................104
Zheng,Guanyu......................63
Zheng,Hongpeng...............149
Zheng,Hongyu......... 97, 98, 99
Zheng,Hui...........................171
Zheng,Ming...... 118, 125, 133,
136, 137
Zheng,Yinhua................ 72, 74
Zhong,Lurun.............. 131, 136
Zhou,Ben...........................108
Zhou,Jiangbin.....................162
Zhou,Keqin...........................75
Zhou,Lei........ 61, 71, 128, 135
Zhou,Nan.............................51
Zhou,Qiang........................128
Zhou,Qing..........................161
Zhou,Xingxing............ 138, 153
Zhou,Yan..............................65
Zhou,Yue............................117
Zhuang,Yuan............. 132, 151
Zhu,Bo...................... 138, 153
Zhu,Guoming G........ 116, 123,
130, 131, 144, 156
Zhu,Hao.............................171
Zhu,Sangzhi.......................173
Zhu,York.............................133
Zhu,Zhengshu......................82
Zhu,Zhenhua........................46
Zimmer,Hans........................81
Zimmerli,Yan.........................60
Zimmer,Thomas..................149
Zingsheim,Frank.................107
Zöchbauer,Markus................73
Zohdy,M.............................153
Zong,Changfu........ 97, 98, 98,
99, 169, 174
Zou,Qian.......... 103, 107, 107,
108, 108, 110
Zou,Yang..............................73
Zuby,David S......................164
Zuo,Chengji............... 122, 153
Zuo,Lei.................................96
191
awards
SAE Award Recipients and Fellows Recognized at SAE 2013 World Congress
SAE Medal of
Honor
Mr. Arnold W. Siegel
Yasuhiro Matsui
National Traffic Safety and
Environment Laboratory (NTSEL)
Accident Reconstruction
Associates, Inc.
Jesse Ruan
SAE Fellow Grade
of Membership
John L. Turner
Prof. Avinash Kumar Agarwal
Indian Institute of Technology Kanpur
Mehdi Ahmadian
Bridgestone Americas Tire
Operations, LLC (retired)
Robert M. Wagner
Brian H. West
Terrence F. Alger II
Margaret S. Wooldridge
Choongsik Bae
Korea Advanced Institute of Science
and Technology
Eric W. Curtis
Ford Motor Company
Mark F. Horstemeyer
Mississippi State University
Aleksey (Alex) Yezerets
Cummins Inc.
John A. Yurtin
Delphi Automotive Systems
Guoming G. Zhu
Arch T. Colwell
Cooperative
Engineering Medal
Haoran Hu
David A. Lamb
Eaton Corporation
Andrew Jackson
University of Pennsylvania
Tang-Wei Kuo
Liguang Li
Tongji University
Berthold Martin
Chrysler Group LLC
192
Rémi Delmas
ONERA
Michael Dinsmore
Consultant/ Sole Proprietor
Nicolas Dronniou
IFP Energies Nouvelles
Pierre-loïc Garoche
ONERA
Jaroslaw Grochowicz
Ford Werke GmbH
Ronald K Hanson
Stanford University
Hariharan Krishnan
General Motors
Deepak Kulkarni
NASA Ames Research Center
Fidele MOUPFOUMA
Bombardier Aerospace
University of Illinois at
Urbana-Champaign
Predrag (Pega) Hrnjak
Ford Motor Company
Virginia Polytechnic Institute and State
University (Virginia Tech)
Southwest Research Institute (SwRI)
John E. Dec
U.S. Army RDECOM-TARDEC
Achim Reich
Continental Teves AG & Co.oHG
Pierre Roux
ONERA
Jordan A. Snyder
Arch T. Colwell
Merit Award
United Technologies Research Center
Harald Abendroth
NASA Ames Research Center
Consultant
Carlos Agudelo
Link Engineering Company
Adrien Champion
Rockwell Collins France/Onera
Yao Wang
André Weimerskirch
ESCRYPT Inc.
Karl-Heinz Wollenweber
TRW Automotive, Lucas Varity GmbH
Arnold W. Siegel
International
Transportation
Safety Award
Frank A. Pintar
Medical College of Wisconsin
Edward N.
Cole Award
for Automotive
Engineering
Innovation
Hussein Dourra
Chrysler
Forest R.
McFarland Award
Ravi Thyagarajan
Mallikarjuna Bennur
Lianxiang Yang
General Motors LLC
Ken Farsi
Dassault Aircraft Services
Wes Fulton
Fulton Findings LLC
Raymond Kach
Aleksey (Alex) Yezerets
Cummins Inc.
Franz F. Pischinger
Powertrain
Innovation Award
Simon C. Tung
Vanderbilt Chemical Company
Ford Motor Company
Elmer A. Sperry
Award
MAHLE Test Systems
John Ward Duckett
Amera-Veritas Inc.
Paul J. Kunder
Barrier Systems Inc.,retired
Alan A. Luo
To Be Announced
Oakland University
Michael J. Flannagan
Kathleen Kedzior
Environmental
Excellence in
Transportation
Award
US Army TARDEC
Ryan McGee
Ford Motor Company
Federico Millo
Politecnico di Torino
Excellence in
Engineering
Education Award
Rahul Mital
Bob Woods
Varroc Lighting Systems GmbH
Rainer Neumann
University of Texas at Arlington
Paul J Richards
Innospec, retired
John Rugh
Corina Sandu
Virginia Polytechnic Institute and
State University (Virginia Tech)
Christof Schernus
FEV GmbH
Harry L. Horning
Memorial Award
Michael J Andrie
Russell Durrett
David E. Foster
University of Wisconsin - Madison
Venkatesh Gopalakrishnan
Roger Krieger
Paul Loeper
Richard C. Peterson
Alejandro Plazas
Youngchul Ra
Patrick G. Szymkowicz
193
awards
Henry Ford II
Distinguished
Award for
Excellence in
Automotive
Engineering
Max Bentele
Award for Engine
Technology
Innovation
William Attard
MAHLE Powertrain LLC
Simon (Hsin-Chung) Ho
Chrysler Group LLC
Yung-Li Lee
Chrysler Group LLC
Jwo Pan
Corina Sandu
Myers Award
for Outstanding
Student Paper
Carl Justin Kamp
Massachusetts Institute of Technology
Alexander Sappok
International
Leadership Citation
Ramesh K. Agarwal
Victor W. Wong
Myra Blanco
Virginia Tech Transportation Institute
Ralph R. Teetor
Educational Award
Jeongmin Ahn
Melody Baglione
Cooper Union
Thomas H. Bradley
Terrence F Alger II
The University of New South Wales
Colorado State University
Sanghoon Kook
Southwest Research Institute (SwRI)
Tie Li
Shanghai Jiao Tong University
Texas A&M University
Timothy V. Johnson
David A. Rothamer
Corning Incorporated
Alexander Sappok
Gregory Matthew Shaver
Purdue University
Donald J. Siegel
194
Rumbaugh
Outstanding
Student Leader
Award
Michael J Nienhuis
Ford Motor Company
Russell S. Springer
Award
Reese Allen
Electroimpact, Inc.
Syracuse University
Lloyd L. Withrow
Distinguished
Speaker Award
Timothy J. Jacobs
Virginia Polytechnic Institute and State
University (Virginia Tech)
Washington University in St. Louis
J. Cordell Breed
Award for Women
Leaders
Rodica Baranescu
Award for Technical
& Leadership
Excellence in
Commercial Vehicle
Engineering
SAE Delco
Electronics
Intelligent
Transportation
Systems Award
Sue Bai
Honda R&D North America, Inc.
SAE John
Johnson Award
for Outstanding
Research in Diesel
Engines
Miles Fergusson Brammer
IAV GmbH
Lutz Krämer
SAE / TimkenHoward Simpson
Automotive
Transmission and
Driveline Innovation
Award
Dr. Jürgen Greiner
ZF Friedrichshafen AG
Vincent Bendix
Automotive
Electronics
Engineering Award
Hariharan Krishnan
André Weimerskirch
ESCRYPT
IAV GmbH
Kay Langeheinecke
IAV GmbH
Jochen Schaeffner
IAV GmbH
Friedemann Schrade
IAV GmbH
Technical
Standards Board
Outstanding
Achievement
Award
Please visit http://www.sae.
org/news/awards for award
descriptions, nomination deadlines
and past recipients.
Robert Brocx
Red Dot Corporation
Richard K. Deering
SAE / AISI Sydney
H. Melbourne
Award for
Excellence in the
Advancement of
Automotive Sheet
Steel
Cecilia Föjer
OCAS NV
David K. Matlock
Colorado School of Mines
RK Deering & Associates, Inc.
Tim Duncan
Link Engineering Company
Gregory V. Gillham
Detroit Diesel Corporation
Thomas J. Poorman
North American Lighting
Monique N. Richard
Toyota Motor Engineering &
Mfg. NA Inc.
Emmanuel De Moor
Jan Penning
Ghent University
John G. Speer
195
Detroit Marriott Renaissance Center
LEVEL 5
MACKINAC BALLROOM
EAST
SALON
WEST
SALON
Professional Development Seminars
and Committee Meetings
FOYER
A JOLIET B
RESTROOMS
A
DULUTH
B
A
MARQUETTE
B
A
NICOLET
TORS
ESCALA
A
B
S
ELEVATOR
TORS
ESCALA
LASALLE
B
A
CADILLAC
A
BRULÉ
B
A
B
RICHARD B
LEVEL 4
STAGE
Committee Meetings
RENAISSANCE BALLROOM
CARTIER
CABOT
COLUMBUS
RENAISSANCE FOYER
EAST
FOYER
WEST
FOYER
RESTROOMS
S
ELEVATOR
GRECO
COATROOM
RA
RESTROOMS
MICHELANGELO
BANQUET
OFFICE
MONET
PH
RENOIR
AE
L
DAVINCI
RESTROOMS
LEVEL 3
ONTARIO EXHIBIT HALL
EAST
WEST
LEVEL 1
RESTROOMS
AMBASSADOR BALLROOM
SALON 1
FOYER/REGISTRATION
COATROOM
SALON 2
SALON 3
S
ELEVATOR
RESTROOMS
HOTEL LOBBY
VOLT / LOUNGE
ESCALATORS
GIFT SHOP
WINTER GARDEN
LATITUDE
VOLT
PATIO
LONGITUDE
42° N
RESTAURANT
196
42° N
PATIO
RETAIL SPACE
“Don’t judge each day by the harvest you reap, but by the seeds you plant.”
Robert Louis Stevenson
The Next Generation of
Innovators is Counting on You!
The SAE Foundation is a recognized leader
for innovative programs fostering the
advancement of science, technology,
engineering and mathematics
(STEM) education.
Through the interactive A World
In Motion® program, F1 in
SchoolsTM program, Collegiate
Design SeriesTM competitions,
and Scholarship and Awards
programs, we actively support
the innovation cycle from
learning to achievement to
recognition.
When you support the SAE
Foundation you play an important
role in the development of the next
generation of innovators.
Make a gift – visit www.saefoundation.org.
www.saefoundation.org • 1-724-772-8515 • [email protected]
P135193
197
SAE Seminars
Start
Date
End
Date
List
Fee
Mbr
Fee
4/16/13
4/16/13
Tschirhart, Michael &
Kosinski, John
$745
$675
Emissions-Related OBD Systems: A Design Overview (C0708)
4/15/13
4/15/13
Van Gilder, John F
$805
$725
Exhaust Flow Performance and Pressure Drop of Exhaust
Components and Systems (C0235)
4/15/13
4/15/13
Masoudi, Mansour
$745
$675
Alternative Fuels: Impact on SI and CI Fuel Systems, Distribution
and Storage (C0729)
4/16/13
4/17/13
English, Ed &
Chesneau, Howard
$1,355 $1,135
Advanced Diesel Particulate Filtration Systems (C0502)
4/18/13
4/19/13
Konstandopoulos,
Athanasios &
Masoudi, Mansour
$1,315 $1,185
Robust Design - NEW! (C1231)
4/15/13
4/16/13
Dodson, Bryan
$1,225 $1,103
Weibull-Log Normal Analysis Workshop (86034)
4/15/13
4/17/13
Fulton, Wes
$2,085 $1,875
Geometric Dimensioning & Tolerancing (C0133)
4/16/13
4/18/13
Belanger, John-Paul
$1,655 $1,485
Finite Element Analysis for Design Engineers - **Hands-on FEA
Workshop (93006)
4/17/13
4/18/13
Kurowski, Paul
$1,395 $1,255
**Principles of Cost and Finance for Engineers (C0828)
4/15/13
4/17/13
Masiak, Jim
$1,625 $1,465
Success Strategies for Women in Industry and Business (C1202)
4/15/13
4/15/13
Bardasz, Ewa
$575
Engineering Project Management (99003)
4/15/13
4/16/13
Mago, Angelo
$1,465 $1,315
Program and Risk Management (C0409)
4/17/13
4/18/13
Sittsamer, Murray
$1,305 $1,175
Managing Engineering and Technical Professionals (C0608)
4/17/13
4/19/13
Timmis, Eric
$1,725 $1,555
Program Name and I.D.#
Instructor
Electronics
Vehicle User Interfaces: Principles and Techniques for Design and
Development (C114)
Management/Marketplace
$518
Materials
Fundamentals of Metal Fatigue Analysis (94024)
4/15/13
4/17/13
Comer, Jess J
$1,725 $1,555
Corrosion Engineering and Prevention - NEW! (C1217)
4/17/13
4/18/13
Nazri, Gholam-Abbas
$1,225 $1,103
Threaded Fasteners and the Bolted Joint (95030)
4/18/13
4/19/13
Comer, Jess J
$1,385 $1,245
198
Start
Date
End
Date
Instructor
List
Fee
A Familiarization of Drivetrain Components (98024)
4/15/13
4/16/13
Palazzolo, Joe
$1,385 $1,265
Chassis & Suspension Component Design for Passenger Cars
and Light Trucks (95025)
4/15/13
4/17/13
Barak, Pinhas
$1,625 $1,465
Fundamentals of Heavy Truck Dynamics (C0837)
4/15/13
4/17/13
Ahmadian, Mehdi
$1,625 $1,465
Internal Combustion Systems: HCCI, DoD, VCT/VVT, DI and VCR
(C0613)
4/15/13
4/17/13
McVea, Mark
$1,595 $1,435
Fundamentals of All-Wheel Drive Systems (C0305)
4/17/13
4/17/13
Palazzolo, Joe
$765
High Performance Differentials, Axles, & Drivelines - NEW! (C1113) 4/18/13
4/19/13
Palazzolo, Joe
$1,285 $1,155
Program Name, I.D.#, Location
Mbr
Fee
Powertrains/Propulsion
$685
Safety/Testing
Applying Automotive EDR Data to Traffic Crash Reconstruction
(C1210)
4/17/13
4/19/13
Ruth, Richard
$1,545 $1,391
Safe Handling of High Voltage Battery Systems (C1019)
4/18/13
4/18/13
Spek, Erik J
$765
**Vehicle Frontal Crash Occupant Safety and CAE (C0621)
4/15/13
4/16/13
Kang, Stephen
$1,305 $1,175
Accelerated Test Methods for Ground and Aerospace Vehicle
Development (C0316)
4/18/13
4/19/13
Porter, Alexander J
$1,335 $1,205
$685
Members receive a 10 – 20% discount off the list fee. Classic members – 10%; Premium – 15%;
Elite – 20%
Seminars are being held in two locations:
** SAE Automotive Headquarters Detroit Marriott at the Renaissance Center Level 5 and
SAE Automotive Headquarters, 755 W. Big Beaver, 16th Floor, Troy, Michigan. To register for seminars on-site visit the SAE Seminar Desk on Level 5 at the Detroit Marriott at the
Renaissance Center For complete seminar descriptions, please visit SAE’s website at www.sae.org/congress or the
SAE Seminar Registration Desk.
199
SAE committee task force & board meetings
Monday, April 15
Group
Location
Time
Pre-College Education Committee
Marriott – DaVinci
8:00 a.m. – 12:00 p.m.
IEA Spray Workshop
Cobo – O2-39
8:00 a.m. – 2:00 p.m.
TEETOR Tour
Marriott – Motor Lobby
8:00 a.m. – 4:00 p.m.
FISITA Meeting
Marriott – Greco 8:00 a.m. – 5:00 p.m.
MBR CPR
AHQ – Standards Room
8:00 a.m. – 5:00 p.m.
Vehicle EE System Diagnostic Standards
Committee
AHQ – Network Room
8:30 a.m. – 12:30 p.m.
SAE Foundation Board of Trustees
Marriott – Michelangelo
10:00 a.m. – 4:00 p.m.
Highway Tire Forum Committee
1:00 p.m. – 4:00 p.m.
Continuing Professional Development CommitteeAHQ – Education Room
1:30 p.m. – 4:00 p.m.
Land & Sea Group (LSG)
Cobo – Motor City Room
3:00 p.m. – 5:00 p.m.
TEETOR Meeting
Marriott – Da Vinci
4:00 p.m. – 6:00 p.m.
SAE Fellow Reception (Invitation Only)
Marriott – Ambassador Ballroom
5:00 p.m. – 6:00 p.m.
SAE Fellows Dinner (Invitation Only)
Marriott – Ambassador Ballroom
6:15 p.m. – 9:00 p.m.
TEETOR Award Reception (Invitation Only)
Marriott – Mackinac West
7:00 p.m. – 8:00 p.m.
SAE 2013 Engineering Meetings Board
Chairperson
Dr. Pranab Saha, PE
Kolano and Saha Engineers, Inc.
Past Chairperson
Dr. Kamran Rokhsaz
Wichita State University
Members
Air and Space Group (ASG) Chair
John C. Dalton
Boeing Company
Land and Sea Group (LSG) Chair
Scott Sluder
Service Technology Program
Committee (STPC) Chair
Kathy Kedzior
Mahle Powertrain, LLC
Members-at-Large
David Amirehteshami
The Boeing Company
Joseph J. Barkai
IDC Manufacturing Insights
Prof. Samir N. Y. Gerges
Federal University of Santa
Catraina
Wei-Jian Han, Ph.D.
Ford Motor Company
Sustainable Development
Program Committee (SDPC)
Chair
Sujit Das
Alain P. Jablonowski
Robert Bosch LLC
Technical Quality Response Team
(TQRT) Chair
Christopher Shaw
Visteon Corporation
James C. Miller
Deere & Company
Patrick Leteinturier
Infineon Technologies AG
Matthew Newkirk
Afton Chemical Corporation
June Ogawa
The Boeing Company
200
Dr. Cornelius N. Opris
Caterpillar Inc.
Gerald S. Shoemaker
Cessna Aircraft Company
Nakia Simon
Chrysler Group LLC
Prof. Richard K. Stobart
Arnold A. Taube, PE
Deere & Company
Dr. Kamal Kishore C. Vora
ARAI Academy
H. Robert (Bob) Welge
Robert's Engineering
Development
SECRETARY
Patti Kreh
SAE International
Tuesday, April 16
Group
Location
Time
Advanced Power Sources Committee
Cobo – W2-60B
7:00 a.m. – 8:00 a.m.
Membership Board Meeting
Marriott – Greco
7:30 a.m. – 4:00 p.m.
Thermal Systems Management Activity
Cobo – W2-60B
8:00 a.m. – 9:00 a.m.
Fuel & Lubricants TC1 Engine Lubrication
Committee
Cobo – D2-15
8:30 a.m. – 10:00 a.m. Vehicle Dynamics Standards Committee
8:30 a.m. – 12:00 p.m.
ABET Relations Committee
9:00 a.m. – 11:00 a.m.
HFTC6, Operator Accommodation Committee
Cobo – D2-13
9:00 a.m. – 3:00 p.m.
Committee on Automotive Rubber Specs
AHQ – Education Room
9:00 a.m. – 12:00 p.m.
Start-Stop Battery Committee
Cobo – D2-10
10:00 a.m. – 11:00 a.m. Fuel & Lubricants TC3 Driveline & Chassis
Lubrication Cobo – D2-15
Hybrid J2836tm-J2847-J2931 Task Force
10:00 a.m. – 12:00 p.m.
Trailer Braking Standard Task Force
Cobo – D3-16
11:00 a.m. – 1:00 p.m.
Ferrous/Non-Ferrous Committee
Cobo – DO 02AB
11:30 a.m. – 12:30 p.m.
TQRT Committee
11:30 a.m. – 1:00 p.m.
Cooling Systems Standards Committee
1:00 p.m. – 4:00 p.m.
Collegiate Design Series Committee
2:00 p.m. – 4:00 p.m.
Fire Safety Committee/Motor Vehicle Fire
Invest. TF Joint Mtg.
Cobo – D3-26
1:00 p.m. – 3:00 p.m.
Journal Editors Meeting
Cobo – D3-27
2:00 p.m. – 4:00 p.m.
Truck and Bus Battery Committee
2:00 p.m. – 3:00 p.m.
Hybrid Technical Committee
3:00 p.m. – 4:30 p.m.
Faculty Advisors Committee
3:30 p.m. – 4:45 p.m.
Control & Calibration Committee
Cobo – W2-60B
4:00 p.m. – 5:00 p.m.
10:00 a.m. – 12:00 p.m.
201
SAE COMMITTEE TASK FORCE & BOARD MEETINGS
Wednesday, April 17
Group
Location
Time
Occupant Protection Committee Meeting
Cobo – D3-27 6:30 a.m. – 8:00 a.m.
Combustion & Fuels Committee
Cobo – W2-60B
7:00 a.m. – 8:00 a.m.
Premier/Elite Membership Breakfast
Cobo – W1-51
7:00 a.m. – 8:30 a.m.
NAIPC Leadership Team Meeting
7:00 a.m. – 9:00 a.m.
Chassis Controls Technical Committee
7:30 a.m. – 9:30 a.m.
Publications Board
Marriott – Da Vinci
8:00 a.m. – 1:00 p.m.
Non-Hydraulic Hose Task Force AHQ – Education Room
8:00 a.m. – 12:00 p.m.
Education Board
Marriott – Greco
8:30 a.m. – 12:00 p.m.
Interior Climate Control Steering Committee
Cobo – D2-15
8:30 a.m. – 5:00 p.m.
Fuel and Lubricant Council
Cobo – D2-13
9:00 a.m. – 11:00 a.m.
Automotive Electronic Systems Reliability
Standards Committee
AHQ – Networking Room
9:30 a.m. – 12:00 p.m.
TC22/SC9 Vehicle Dynamics and Road
Holding Ability USTAG
Cobo – D3-16
10:00 a.m. – 12:00 p.m.
Organization Appreciation Celebration
Cobo – W2-60B
11:00 a.m. – 1:00 p.m.
Executive Nominating Committee
12:00 p.m. – 5:00 p.m.
Vehicle Aerodynamics & Road Vehicle
Aerodynamics Committees
Cobo – D3-24/25
1:00 p.m. – 4:00 p.m.
Fuel System Standards Committee
1:00 p.m. – 4:00 p.m.
Battery Capacitive Energy Storage Committee
Cobo – D2-10
1:30 p.m. – 3:00 p.m.
Non-Hydraulic Hose Committee
1:30 p.m. – 3:00 p.m.
Lubricants & Powertrain Committee
Cobo – W2-60B
Materials, Modeling & Testing Committee
Cobo – D0-01AB
4:30 p.m. – 5:30 p.m.
Engineering Meetings Board Meeting
Marriott – Greco
5:00 p.m. – 8:00 p.m.
4:00 p.m. – 5:00 p.m.
DON’T FORGET TO VOTE!
Best of the Best Booth Awards
Kiosks located in the front Oakland Hall.
The Best of the Best Booth Awards recognize exhibitors with the most innovative technology.
Please vote for the most innovative exhibitor in each of the following categories:
• Poster Display
• 10x10 Booth
• 10x20 Booth
• 20x20 Booth
• Most Innovative Booth Overall
Voting will close Wednesday, April 17 at 6:00 p.m., so be sure to visit the voting kiosks in the
front of Oakland Hall before that time.
Best of the Best Award winners will be recognized during the World Congress Annual Banquet
202
Thursday, April 18
Group
Location
PF&L Executive Committee
Cobo – W2-60B
Time
Ground Vehicle Reliability Committee
Cobo – D3-16
8:00 a.m. – 4:00 p.m.
Wheel Finishing Lab Testing Task Force
9:00 a.m. – 12:00 p.m.
Ignition Standards Committee Meeting
9:00 a.m. – 4:00 p.m.
IDM Activity
Cobo – D0-02AB
11:30 a.m. – 12:30 p.m.
Exhaust Aftertreatment & Emissions Committee
Cobo – W2-60B
11:30 a.m. – 12:30 p.m.
Sustainable Development Program Committee
Cobo – O2-38
11:45 a.m. – 12:45 p.m.
Service Technology Program Committee
Cobo – D3-27
12:00 p.m. – 1:30 p.m.
Pedestrian Dummy Task Group
Cobo – D2-10
1:00 p.m. – 3:00 p.m.
Wheel Standards Committee
1:00 p.m. – 3:00 p.m.
Auto Trans Transaxle Committee
1:00 p.m. – 4:00 p.m.
SETC Committee
1:30 p.m. – 3:00 p.m.
Motor Vehicle Council
Cobo – D2-13
2:30 p.m. – 4:30 p.m.
7:00 a.m. – 9:00 a.m.
Friday, April 19
Group
Location
Time
Functional Safety Committee
7:00 a.m. – 11:30 a.m.
Vehicle Architecture for Data Communications
Standards
AHQ – Education Room 9:00 a.m. – 12:00 p.m.
Safety Test Instrumentation Standards Committee
9:00 a.m. – 1:00 p.m.
Human Biomechanics and Simulations Standards
Committee
1:00 p.m. – 5:00 p.m.
203
CALL FOR PAPERS
2014 Host Company
April 8 - 10, 2014 • Detroit, Michigan USA
Abstracts must be submitted online via www.sae.org/congress/ to only ONE session.
Upon submission, you will receive an automatic reply with your paper offer number. If
you do not receive a paper offer number at that point, please retry on-line submission
or email [email protected]. Offered papers shall not have been published outside of SAE;
and if accepted, contributors will not release their paper
for publication through other media.
The following information will be required during the on-line submission process:
1. A summary that states the objective of the paper/presentation;
2. Tentative title;
3. Name of the author and co-authors and all contact information;
4. Selection of the most appropriate technical session.
Paper acceptance will be based on organizer moderated peer review of a review ready manuscript.
Refer to the author resources site at http://volunteers.sae.org/authors.htm for other useful information in preparing your paper.
ELECTRONICS & ELECTRICAL SYSTEMS
PROPULSION/POWERTRAIN
Testing & Instrumentation
• Remote Communications and Data Analysis
• New Test Methodologies and Information
Management
• On-board Instrumentation and Diagnostics
• Component / System Simulation
• Software/Hardware System Equipment and
Innovations
• System Software Testing & Validation
• IVHM
• Prognostics
Electrical & Electronic Systems
• Electrical Wiring Harnesses
• Electro-mechanical Designs
• Electronics Reliability
• Model-Based Design and In-Vehicle Software
• Multi-Media Systems
• Software Safety Systems
• Systems Engineering
Hybrid and Non-Traditional Powertrains
• Advanced Hybrid Vehicle Powertrains
• Fuel Cell Power Systems
• EV Powertrains
• Advanced Battery Technologies
• Natural Gas Engines and Vehicles
• Hydrogen IC Engines
• Power Electronics
Fuel & Additive Effects on Combustion
• Alternative and Advanced Fuels
• Fuel Injection & Sprays
• Fuel & Additive Effects on Engine
Performance
Compression Ignition Engines
• CI Engine Modeling
• Cold Start & Transients
• Kinetically Controlled CI Combustion
(HCCI)
• Partially Premixed Combustion
• Mixing Controlled (Diesel) Combustion
• In-Cylinder Diesel Particulate & NOx
Control
• New Diesel Engines & Components
• Lubricant Diagnosis and Management
Systems
Spark Ignition Engines
• SI Engine Modeling
• Direct Injection SI Engine Technology
• New SI Engine & Component Design
• Two-Stroke Engines
• Rotary Engines
• SI Combustion
High Efficiency and Reduced CO2/km )
• Waste Heat Recovery
• Engine Downsizing and Downspeeding
• Variable Valvetrain Technologies
• Small High-Efficiency Engines
• Vehicle Sensors & Actuators
• Telematics Systems / Vehicle Navigation/ HMI
• Auxiliary Controls
• Electronic Components and Microprocessors
• Electronic Engine Controls
• On Board Diagnostics
Connected Vehicle
• Smart Vehicle / Smart Infrastructure
• Smart Grid Technologies
• EV Infrastructure
• Vehicle Information and Communication
• Intelligent Transportation Systems
CAD/CAM/CAE
• Design Simulation & Design Tools
• Digital Modeling
• Rapid Prototyping
• Virtual Development
Interior Electronics
Lighting Technology
ENVIRONMENT / EMISSIONS/ SUSTAINABILITY
Emissions
• Advanced Catalyst Technology
• Cold Start Emissions Control Technologies
• Diesel Exhaust Emission Control (DPF
Substrates & Systems, Durability, HCDeNOx, Modeling, New Developments,
SCR)
• Emissions Measurement & Testing
• Emissions Processes for SI Engines
• Particulate Emissions from Direct Injection
Gasoline Engines
• Gas Direct Injection Aftertreatment
• Lean NOx Catalysts
• LEV and ULEV Emissions
• Non-Thermal Plasma Aftertreatment
• Substrate Technology Surface Engineering
& Tribology
Thermal Systems
• Climate Control
• Thermal Systems Components
• Thermal Systems for Electric & Hybrid
Vehicles
• Thermal Systems Modeling & Simulation
• Energy Efficiency of Thermal Systems
Sustainable Systems
• Intelligent Highways & Guidance Systems
• Low VOC for Interiors
• Energy Efficient Manufacturing
• Design for Sustainability
• Vehicle Ownership/Usage Alternatives
(shared ownership, renting, etc)
• GHG Emissions Reduction
• Integration of Transportation Systems into
Urban Environments
• Mass Transit and Regional Transit Systems
in an Era of Mega-Cities
• Sustainable and Energy Efficient
Manufacturing
• Advances in Alternative Energy Sources
for Sustainable Development in the
Transportation Sector
• Sustainable Materials and Components
• LCA and Sustainability
• Vehicle Electrification Strategies for
Sustainability
• End of Life Management: Reuse/ Recycle/
Remanufacture
• Megatrends in Sustainability
• Reliability of Transportation System Design
• HEV Battery Management at End of Life
(EOL)
MATERIALS
Ferrous
• Advances in Bar Steel & Heat Treatment
Technology
• Castings
• Coated Materials
• Exterior Body Panels
• Fatigue Research & Applications
• Stainless Steel
• Stamping Technology
Non-Ferrous
• Aluminum Applications
• Magnesium
• Vehicles Structures & Applications
• Specialty Alloys
Materials Modeling & Testing
• Welding & Joining & Fastening
• Modeling of Materials for Crash Applications
• Experiments in Automotive Engineering
• Load Simulation & Vehicle Performance
• CAE Durability Analysis & Applications
Polymers & Coatings
• Bumper Systems
• Painting Coatings
• Components, Process & Technologies
• Elastomers & Plastics for Fuels, Oils &
Fluids
• Instrument Panels
• Interior Trim
• Composites
• Seals, Gaskets & Rubber Products
• Seating Materials & Design
• Low VOC Materials
• Nanotechnology for Automotive
Applications
• Bearings, Lubricant Systems & Tribology
• Biomaterials
INTEGRATED DESIGN AND MANUFACTURING
CAD/CAM/CAE
• Design Simulation & Design Tools
• Digital Modeling
• Rapid Prototyping
• Virtual Development
Virtual Engineering E-manufacturing
Accelerated Testing and Vehicle Reliability
OEM Global Supply Chain
Aftermarket Supply Chain
Reliability & Robust Design in Automotive
Engineering
NEW
• Axiomatic Design
• Design for Six Sigma
• Design for Manufacturing
• Six Sigma
• Reliability Testing and DOE
• Modeling & Validation
Accelerated Reliability & Durability Testing
Lean Manufacturing for the Mobility Industry
Concurrent Engineering
Leadership for Lean Safety
Control and Optimization
• Powertrain Control and Optimization
• Powertrain Actuators and Sensors
• Combustion Control and Optimization
Engine Components and Subsystems
• Advanced Turbochargers & Power Boost
• Engine Breathing Systems
• Power Cylinder Systems
• Variable Valve Actuation Systems
• Electronic Engine Controls
• On Board Diagnostics
Lubricants
• Engine Oils
• Heavy Duty Diesel Lubricants
• Transmission and Axle Lubricants
• Lubricant R&D to Improve Vehicle
Performance
Transmissions & Drivelines
• Clutch Systems & Controls
• Gear Systems & Driveline
• Launch Devices
• New Transmission Systems
• Hybrid Transmissions
• CVT/IVT
• Transmission & Driveline NVH
Engine Flows and Combustion Diagnostics
In-Cylinder Velocity Measurements
Heat Transfer and Advances in Thermal
&Fluid Sciences
Multi-Dimensional Modeling
Vehicle & Engine Systems Analysis &
Modeling
SAFETY / TESTING
Connected Vehicle
• V2V/V2I Safety Applications
Activity Safety
• Lane Departure Warning/Lane Keeping
Assistance
• Collision & Blindspot Warning
• Active Pedestrian Protection
• Backover Protection
• Collision Imminent Braking
• Collision Avoidance
Occupant Protection
• Air Bag/Suppression
• Belt Restraints
• Child Passenger Restraints
• Biomechanics
• Pedestrian Safety
• Integrated Safety Systems
• CAE Methods in Crash Safety
Applications Occupant Safety
• Rollover
• Rear & Side Impact
• Accident Reconstruction
• Event Data Recorders
• Computer Applications for
Crashworthiness
• Vehicle Aggressivity & Compatibility in
Crashes
• Safety Test Methodology
• Safety Critical Systems
• Collision Avoidance
• Pre-crash sensing
Fire Safety
• Fire Statistics & Analysis
• Material Flammability & Fire Experiments
• Underhood and Electrical Fires
• Hydrogen Vehicle Fire Safety
• Suppression Systems
Body Design & Engineering
Design Optimization: Methods &
Applications
Body Structures
Corrosion Prevention
Digital Human Modeling
Glass Applications
Human Factors
• Seating
• Vision and Visibility
• Comfort
• Mobility
• Telematics
Lighting Technology
Aerodynamics
Wiper Systems
Steering, Chassis & Suspension
• Steering/Suspension Components &
Systems
Tires & Wheels
• Component design/test technologies
• Simulation/modeling
• Testing and performance evaluation
Vehicle Dynamics and Simulation
• Passive/active
• Stability control systems
• Simulation and modeling
Motorsports
• Safety
• Vehicle/Chassis
• Tires
• Testing/Simulation
• Aerodynamics
• Powertrain
• Fuels & Lubricants
• Materials
• Green Motorsports
• Alternative Energy Systems & Sources
Noise, Vibration and Harshness
• Engine/Powertrain/Drivetrain
• Vehicle Exterior
• Numerical Methods
• NVH Measurement
• Passive and Active NVH Control
• Standards/Process
• Vehicle Subsystem NVH
LINE
DEAD
Deadline for submitting paper offers ...................................September 1, 2013
Review Ready Manuscripts due to session organizers ........... October 15, 2013
Final Manuscripts due to SAE .................................................. January 18, 2014
Abstracts will be confirmed after September 1.
P130112
sae.org/congress
April 16 -18, 2013 • Cobo Center • Detroit, Michigan, USA
to r
c
e
r
i
d
t
i
b
E xh i
y
Official Publication of:
Floor Plan............................................ 206
Exhibitor Listing................................. 207
Exhibitors by Technology................. 208
Exhibitor Profiles................................210
Host Company
Exhibit Hours
Tuesday, April 16
10:00 a.m. – 6:30 p.m.
Wednesday, April 17
10:00 a.m. – 6:00 p.m.
Thursday, April 18
10:00 a.m. – 6:00 p.m.
Tier One
Strategic Partner
206 EXHIBIT DIRECTORY
Exhibitor Floor plan
Media
Center
Food Court
Entrance
FEV Powertrain
Innovation Forum
130
131
337
436
437 536
537
737
333
533
632
331 430
531
630
631
733
832
731
830
839
938
939
837
936
937 1036
Networking
Lounge
1138
1139 1238
1037 1136
1137 1236
1237
1334
1133 1232
1233 1332
1031 1130
1131 1230
1231 1330
M1331
1226
1227 1326
M1327
925
1025
1125 1224
1225 1324
M1325
919 1018
1019
1119
831
Entrance
M228
227P 326P
327
M226
225P 324P
325 424
425
ZF
321
421
525
M220
219
319
418
M214
213
313
412
Chrysler
Group
LLC
619
419 518
615P 714P
M208
207
407
301
401
Networking
Lounge
201
AVL Technology
Leadership Center
ENTRANCE
SAE
International
Mobility History
Display
613P 712P
513
307
819
509
608
507
606
502
503
602
500
501
600
BASF
814
713
812
813
915 1014
1115P1214P
1215 1314
913 1012
1113P1212P
1213 1312
1107
1205 1306
908
607
807
701
800
907 1006
1007
903
802
601
906
801
901 1000
ENTRANCE
1103 1202
1101 1200
1001
ENTRANCE
Technology
Center
Entrance
Wayne Hall Entrance
Oakland Hall Entrance
Cobo Lobby
206
M1319
Networking
Lounge
1201
Registration
Ride and Drive
439
Networking
Lounge
EXHIBIT DIRECTORY 207
Exhibitor Listing by Booth
CompanyBooth
A
A&P Solutions........................................... 831
ADM21 Co Ltd........................................ 1133
Advanced Cooling Technologies Inc......... 901
AdvanTech International............................ 913
AEC SRL................................................... 925
Air Temp de Mexico SA de CV................. 831
AluMag Automotive LLC........................... 537
Amet Srl..................................................... 925
Applus IDIADA......................................... 1019
Arce Tools.................................................. 831
Atotech USA, Inc....................................... 500
AutoHarvest Foundation......................M1321
Automotive Design Magzine.................... SAE
Automotive Engineering Intl Magazine..... SAE
AVL North America Inc.............................. 813
B
BAND-IT.................................................. 1215
BASF Charging Lounge
Beijing Trend Aofu Fine Ceramics Co Ltd....421
Bollhoff Inc................................................ 737
BuhlerPrince Inc........................................ 327
Bulk Molding Compounds Inc.................. 701
C
C W Bearing USA Inc................................ 313
CALS Corp.............................................. 1323
Camera Commercio Di Torino................... 925
CD-adapco................................................ 301
Center For Advanced Automotive
Technology.........................................1113P
s.c.p.a.................................................... 925
CHARGED - Electric VEhicles
Magazine...........................................M1319
Chrysler 1/Federico Pasetti....................... 619
Chrysler 2/Matt Liddane............................ 619
Chrysler 3/Ben Winter............................... 619
Chrysler 4/Marios Zenios.......................... 619
Chrysler 5/David Summers/CSG.............. 619
Chrysler 6/Frederick Goedtel.................... 619
Chrysler 7/Mircea Gradu_Bob Lee............ 619
Chrysler Group LLC.................................. 619
Convergent Science Inc.......................... 1202
Core Molding Technologies Inc............... 1006
D
Daesung Electric Co. Ltd.,...................... 1326
Delphi Corp............................................... 207
DG Technologies....................................... 814
DIGA SA de CV......................................... 831
DSM.......................................................1214P
dSPACE Inc............................................... 401
Dynamic Intelligent Solutions..................714P
E
E.R. Wagner.............................................. 333
Eastman Chemical.................................... 807
ECOCAR 2: Plugging in to the Future....M208
Element Materials Technology.................. 503
Emergent Systems.................................. 1312
EmiSense Technologies LLC................... 1213
Enercon Industries.................................... 501
Energy Research Consultants.................227P
ERGONEERS........................................... 1138
Evonik Industries AG................................. 213
Evonik Industries AG..............................M214
Exco Engineering.................................... 1205
FEV, Inc...................................................... 513
Ford Motor Co......................................... 1119
Forza Global Solutions.............................. 831
From Concept to Car................................ 925
Fujipoly America Corp............................... 939
CompanyBooth
G
Gamma Technologies Inc.......................... 906
General Motors Company......................... 407
German Light Weight Engineering and..... 537
Global Flock De Mexico............................ 831
GMB Korea Corporation......................... 1238
Government of Macedonia....................... 606
Grail Engine Technologies......................... 502
Granta Design........................................... 419
Grenzebach/Inos/LJU............................... 219
H
Hart Energy............................................... 731
Henkel....................................................... 307
High Precision Gages................................ 831
Hitachi Metals America, Ltd.................... 1000
Honda...................................................... 1007
Hong Kong Trade Development Council.... 602
Horiba........................................................ 601
Hyundai Motor Group............................... 607
I
IAV Automotive Engineering...................... 819
Industrias Automotrices Rc SA de CV...... 831
Innova Rubbers Pvt Ltd............................ 832
Intertek...................................................... 507
Intrepid Control Systems, Inc................. 1103
Iwis Engine Systems LP............................ 412
J
JATCO Ltd................................................. 536
JG&A Metrology Center............................ 319
Jing-Jin Electric Technologies................... 608
Jinyoung Industrial Co Ltd...................... 1230
JVIS USA LLC........................................... 331
K
KCW Corporation.................................... 1125
Kienle + Spiess GmbH.............................. 537
Korea Powder Metallurgy Co LTD........... 1225
KOTRA..................................................M1331
KSM Castings GmbH................................ 537
Kyowa Americas Inc.................................. 439
L
Lacks Wheel Trim Systems....................... 325
Librestream Technologies......................... 321
Lotus Engineering................................... 1031
Luvata Appleton........................................ 531
M
MAENA...................................................... 831
Manthey Redmond Corp........................... 936
Maplesoft.....................................................T1
Marsilli Group.......................................... 1101
MEET Automotive................................... 1018
Mentor Graphics Corp.............................. 713
N
NAFEMS.................................................. M1325
Namyang Ind. Co. Ltd............................... 1324
Naotech Co Ltd......................................... 1236
National Research Council Canada............ 903
Nissan Motor Company............................... 425
NKE Automotion Srl..................................... 925
North Coast Industrial Imaging.................326P
O
Omen High Pressure Die Casting........... 1012
OmnicO AGV...........................................225P
P
Panasas Inc............................................... 837
Phillips Screw Company........................... 839
CompanyBooth
Politecnico Torino...................................... 925
Prestolite Wire, A General Cable Company....418
PRIMAVIS SRL.......................................... 533
PROMEXICO............................................. 831
Protean Electric....................................... 1001
Proto Labs............................................... 1036
Proto Manufacturing Inc............................ 600
Pyung Hwa Industrial Co Ltd.................. 1224
R
Raydiance................................................712P
Reaction Design Inc.................................. 801
Realization Technologies......................... 1136
Regione Piemonte..................................... 925
REM Surface Engineering......................... 518
Rescale..................................................1115P
Rheinfelden ALLOYS GmbH & Co Kg...... 537
S
SAE International...................................... SAE
Samsung Ind Co Ltd............................... 1139
Samsung Metal Co Ltd........................... 1226
Scuderi Group......................................... 1130
Sekisui S-LEC America, LLC.................. 1107
Shenzhen Shunhe Electric Technology Co....437
Shilla Industrial Co Ltd............................ 1233
Sichuan Zhongzi Exhaust Purge Co Ltd... 630
Siemens..................................................... 430
Sindo High Tech Co Ltd.......................... 1227
SL Corp................................................... 1330
SLW Automotive Inc.................................. 509
Smartstone (Shanghai) Sensing & Control... 1314
Smithers Rapra............................................937
Software Cradle........................................ 802
SpaceClaim Corporation........................... 812
SPAL USA................................................. 436
Stratasys................................................... 915
SUHNER Manufacturing Inc...................324P
Sungwoo Automotive Co Ltd.................. 1231
SuperiorControls..................................... 1306
Synergeering Group, LLC......................... 830
T
Texas Economic Development.................. 919
The Lubrizol Corp...................................... 631
TM4 Inc...................................................613P
Transportation Research Center Inc......... 907
Transtek Magnetics Inc............................. 800
TRUWIN................................................... 1137
Twintec Technologie GmbH...................... 733
U
ULVAC Technologies Inc........................... 424
US Dept of Transportation........................ 337
V
Victrex Polymer Solutions.......................615P
W
WAISSI ENGINE LLC................................ 632
WARDSAUTO.......................................M1307
Wayne State Univ..................................1212P
Whitlam Label Company, Inc.................... 908
Wontae Die Casting Co Ltd.................... 1131
Woosung Engineering Co Ltd................. 1332
Wuhan Hontrust Auto Pulley Ind Co Ltd.1014
Y
Co Ltd.................................................... 1025
Z
ZF.............................................................. 525
Zhejiang Shibao Holding Group.............. 1200
207
Exhibitor Listing by Technology
Electronics
Applus IDIADA.....................................1019
Delphi ...................................................207
DG Technologies...................................814
dSPACE Inc...........................................401
Council...............................................602
JVIS USA LLC.......................................331
Prestolite ....................................................
Co Ltd................................................437
Smartstone (Shanghai) Sensing &
Control Tech.....................................1314
Software Cradle.....................................802
Transtek Magnetics Inc..........................800
TRUWIN..............................................1137
Emissions/Environment/ Sustainability
Beijing Trend Aofu Fine Ceramics Co Ltd.421
BuhlerPrince Inc....................................327
Camera Commercio Di Torino...............925
CD-adapco...........................................301
s.c.p.a................................................925
dSpace Inc............................................401
EmiSense Technologies LLC...............1213
From Concept to Car............................925
Granta Design.......................................419
Marsilli Group......................................1101
MEET Automotive................................1018
Nissan Motor Company.........................425
Reaction Design Inc..............................801
Co Ltd................................................437
Sichnan Exhaust Purge Co Ltd.............630
Software Cradle.....................................802
Think Up................................................925
Twintec Technologie GmbH...................733
ULVAC...................................................424
High-Performance Vehicles
Ford Motor Co.....................................1119
Honda ................................................1007
General Motors Company.....................407
Maplesoft................................................T1
Applus IDIADA.....................................1019
BAND-IT..............................................1215
CD-adapco...........................................301
DG Technologies...................................814
dSpace Inc............................................401
Emergent Systems..............................1312
Enercon Industries.................................501
Exco Engineering.................................1205
Grenzebach/Inos/LJU............................219
Granta Design.......................................419
Librestream Technologies......................321
Marsilli Group......................................1101
Realization Technology........................1136
Rescale.............................................1115P
Shenzhen Shunhe Electric
Technology Co...................................437
Siemens PLM Software.........................430
Software Cradle.....................................802
SpaceClaim Corporation.......................812
Stratasys...............................................915
Sungwoo Automotive Co Ltd..............1231
SuperiorControls.................................1306
Synergeering Group, LLC......................830
Zhejiang Shibao Holding Group...........1200
Management & Marketplace
KOTRA, AIN Global..........................M1331
208
As of March 20, 2013
Materials
AutoHarvest Foundation...................M1321
Core Molding Technologies Inc............1006
DSM..................................................1214P
Eastman Chemical................................807
Element Materials Technology...............503
Evonik Industries AG.............................213
Granta Design.......................................419
Henkel...................................................307
Hitachi Metals America, Ltd.................1000
Luvata Appleton....................................531
Prestolite Wire, A General Cable
Company...........................................418
Samsung Ind Co Ltd...........................1139
Sekisui S-LEC America, LLC...............1107
Co Ltd................................................437
Twintec Technologie..............................733
Victrex Polymer Solutions....................615P
Whitlam Label Company, Inc.................908
Co Ltd..............................................1025
Propulsion/Powertrain
AdvanTech International........................913
Applus IDIADA.....................................1019
Center for Advanced Automotive
Technology.....................................1113P
Chrysler Group LLC, Powertrain............619
Convergent Science Inc......................1202
CW Bearing USA Inc.............................313
dSpace Inc............................................401
E.R. Wagner..........................................333
Evonik Industureis AG...........................213
FEV, Inc.................................................513
Henkel...................................................307
IAV Automotive Engineering...................819
Innova Rubbers Pvt Ltd.........................832
Iwis Engine Systems LP........................412
JATCO Ltd............................................536
Jinyoung Industrial Co Ltd...................1230
Korea Powder Metallurgy Co LTD........1225
Manthey Redmond Corp.......................936
Marsilli Group......................................1101
MEET Automotive................................1018
Naotech Co Ltd...................................1236
Phillips Screw Company........................839
PRIMAVIS SRL......................................533
Protean Electric...................................1001
Pyung Hwa Industrial Co Ltd...............1224
Raydiance...........................................712P
Reaction Design....................................801
REM Surface Engineering......................518
Rescale.............................................1115P
Scuderi Group.....................................1130
Co Ltd................................................437
SLW Automotive Inc..............................509
Smithers Rapra.....................................937
Software Cradle.....................................802
SPAL USA.............................................436
TM4 Inc...............................................613P
ULVAC...................................................424
WAISSI ENGINE LLC.............................632
Wayne State University......................1212P
Wuhan Hontrust Auto Pulley Ind
Co Ltd..............................................1014
Co Ltd..............................................1025
JG&A Metrology Center.........................319
Kyowa Americas Inc..............................439
NAFEMS..........................................M1325
Namyang Ind. Co. Ltd.........................1324
Proto Labs..........................................1036
Co Ltd................................................437
SL Corp..............................................1330
US Dept of Transportation.....................337
Wontae Die Casting Co Ltd.................1131
Safety/Testing
ADM21 Co Ltd....................................1133
Applus IDIADA.....................................1019
ERGONEERS......................................1138
Intertek..................................................507
209
Innovative exhibitor profiles
Exhibitor Directory text is published as submitted by exhibiting companies.
A
Air Temp de Mexico SA de CV
ADM21 Co Ltd
107 Hakdong Li Cheong Yang
Chung Nam 345803
South Korea
www.admglobe.com
Booth #1133
Since 1967, ADM21 has been devoted to serving customers with quality products at competitive pricing.
As one of the leading pioneers, ADM21 has served
to over 100 countries and just recently reached $70
million in exports from last year alone. As the future
is in the hands of customers, it is always ADM21's
utmost priority to not only meet the standards but to
also surpass all expectations through new technology
and innovation. At ADM21, business culture cultivates
passionate and honest services. That is why stewardship of the company, industry, and community is a key
priority.
Advanced Cooling Technologies Inc
1046 New Holland Ave
Lancaster, PA 17601
United States
www.1-ACT.com
Booth #901
Advanced Cooling Technologies, Inc. (ACT) is a premier
thermal management solutions company. We serve
customers in diverse markets including Aerospace,
Automotive, Medical and Military. Our highly engineered products include Heat Pipes, Heat Exchangers
and Cold Plates
AdvanTech International
1600 Cottontail Ln Ste 3
Somerset, NJ 08873
United States
www.advantechinternational.com
Booth #913
AdvanTech International is a global marketer, logistics
and distribution company sourcing cutting edge technology to market to innovative OEM's. The Automotive
Group focuses on delivering Precision Cold Formed
parts for engine, drivetrain, brakes, steering, axles etc.;
Rotary Angle Sensors for HEV, BEV and EPS electric
motors; and High Pressure Die Casting for ultra light
weight transmission covers, housings and frames.
AEC SRL
Strada Del Francese 99
Torino 10156
Italy
Booth #925
Production: AEC means cable harness innovation on
Coax cable assembly for remote keyless entry antenna,
Analog and Satellite antenna cables for radio, navigation systems, GSM phones, and all devices which need
high frequency data and signal transmission, though
the complete range of Corrugated Washer hoses, these
are used for transmission of fluids in the system that
connects the windscreen washer reservoirs to the wiping system's nozzles, for both the windscreen and the
rear window, and Modular Ground Terminals, ultrasonically welded, for the electrical connection to ground of
any kind of automobiles wirings.
KM 10 Carretera Merida-Uman
Tablaje Rustico 97390
Mexico
Booth #831
Air Temp has developed a numeric method for predicting the heat transfer capacity of Automotive condensers under different operational conditions. This method
is the first approximation to the final design and
provides to our customers shorter developing times.
By having an optimized A/C condenser, the vehicle's
environmental impact is reduced.
AluMag Automotive LLC
42056 Michigan Ave
Canton, MI 48188
United States
www.alumag.de
Booth #537
AluMag is a global market developing company Market
Research, Market Development and Road shows that
will help you penetrate new markets and find new business. We access new markets and open doors for your
business – regardless of application, material, process
or product. For SAE 2013 we are supporting and introducing German leading technology companies in the
field of weight reduction and emission reduction in the
NAFTA market.
Amet Srl
Via Livorno 60
Torino 10144
Italy
Booth #925
AMET is a high-tech engineering company, active in the
development of mechanic and mechatronic products,
based on numerical simulation, aimed to assure optimum system performance. AMET (Applied Mechatronic
Engineering & Technologies), has been established in
1999, as a spin-off of Politecnico di Torino; it is very
innovative, actively participating to many collaborative
R&D projects, with industrial partners and Universities,
even supported by public grants. The company's main
customers are OEMs and Tier1 suppliers into the automotive market; further markets are railways and aerospace, mechatronic and energy industries.
A&P Solutions
34231 Pembroke Ave
Livonia, MI 48152
United States
Booth #831
A&P is an innovator in product design and development, utilizing a wide variety of materials such
as: Glass Mat Thermoforming, Long Glass Fiber
/ Polypropylene, Polyurethane and Light-Weight
Reinforced Thermoplastic. Their products offer mass
reductions, weight savings, and reduction of content to
market at an accelerated pace and competitive cost.
Applus IDIADA
PO Box 20
L’Albornar
SANTA OLIVA (Tarragona) E43710
Spain
www.applusidiada.com/en/
Booth #1019
Applus+ IDIADA is a technology services company
specialized in product development for the international
automotive sector through the provision of design,
testing, engineering and homologation services. Its success is based on an international team of over 1,500
engineers and technicians, first-class test facilities, client
orientation and constant investment in innovation.
210
Arce Tools
5 Oriente 210 San Andres Cholula
Puebla 72810
Mexico
Booth #831
Arce Tools is committed to the design and manufacturing of world class gages, checking and welding fixtures
to back up the production process and success of our
domestic and international. Our products are manufactured based on high technological standards and
respect for the environment.
Atotech Usa Inc
1750 Overview Dr
Rock Hill, SC 29730
United States
www.atotech.com
Booth #500
As a leading global chemical supplier to the general metal
finishing industry, Atotech is dedicated to offering complete, high quality and dependable processing systems.
Atotech has tremendous experience providing industry
metal finishing solutions due to many years of global
manufacturing, support and applications. Atotech is committed to providing its customers with the highest quality
and most efficient metal finishing solutions available.
Automotive Design Magzine
400 Commonwealth Dr
Warrendale, PA 15096
United States
www.sae.org
Booth #SAE
Automotive Design, the pan-European magazine of
SAE International, provides European design engineers
a cross section of technology based case studies and
features. Learn about how you can reach this audience
at the SAE Technology Center, located at the front
entrance of the exhibit hall near Registration.
Automotive Engineering Intl Magazine
400 Commonwealth Dr
Warrendale, PA 15086
United States
www.sae.org
Booth #SAE
Pick up a copy to SAE International's flagship publication and the engineers choice for the most timely,
relevant technical information, AEI. The SAE 2013 World
Congress Show Issue will be distributed highlighting
many of the innovations presented at the event. Sign
up for a complimentary subscription to AEI or any
SAE magazines including various technology focused
e-newsletters. Interested in marketing to the global auto
industry? SAE offers many channels in which to do so.
Learn about them at the SAE Technology Center, located
at the front entrance of the exhibit hall near Registration.
AVL North America Inc
47519 Halyard Dr
Plymouth, MI 48170
United States
www.avl.com
Platinum
Sponsor
Booth #813
AVL is the world’s largest privately owned and independent company for the development of gasoline, diesel,
alternative fuel, electric and hybrid powertrain systems.
The company offers combined solutions of powertrain
engineering, simulation software, and testing and instrumentation systems. AVL’s North American Headquarters
is located in the Detroit suburb of Plymouth, Michigan.
B
BAND-IT
4799 Dahlia St
Denver, CO 80216
United States
WWW.BAND-IT-IDEX.COM
Booth #1215
BAND-IT IDEX, INC., The World's Leader in
Engineered Band Clamping Systems is able to supply
your Automotive Banding & Clamping requirements
for Side Curtain Airbags, Exhaust and Cable Shields,
CV Boots and many other vehicle applications. Visit
us at our website.
Beijing Trend Aofu Fine Ceramics
Co Ltd
Bulk Molding Compounds Inc
1600 Powis Ct
West Chicago, IL 60185
United States
www.bulkmolding.com
Booth #701
Bulk Molding Compounds, Inc. (BMCI) offers revolutionary composite material technology to the automotive industry. These customized materials are ideal for
metal replacement and are the answer to the automotive industry’s light weighting needs. A division of
Citadel Plastics, BMCI is a global material provider.
C
C W Bearing USA Inc
Room 2210 Ruidu Intl Center
Beijing 101101
China
www.trendaofu.com
28550 Cabot Dr Ste 700
Novi, MI 48377
United States
www.cwbearing.com
We are professional production of ceramic substrates
and diesel particulate filters for mobile applications,
including light-duty gasoline and diesel passenger cars
and trucks, and heavy-duty diesel vehicles. The largesize substrate for heavy-duty truck is very competitive.
CW Bearing (USA) Inc. is one of the leading ball bearing manufacturers in China for automotive, electric
motors, gearboxes, outdoor products, power tools,
and home appliances. We are established as an
industry leader in ball bearing production using state
of the art assembly processes, and are ISO9001/
TS16949 & ISO14001 certified.
Booth #421
Bollhoff Inc
Booth #313
385 Franklin Ave
Rockaway, NJ 07866
United States
CALS Corp
Bollhoff is a world leader in the manufacturing and
distribution of fasteners and joining solutions – of both
metal and plastic. Through extensive research, we've
developed advanced mechanical joining methods
for aluminum, high-strength steel, and composite
applications. We also provide traditional fasteners and
assembly methods for typical steel and plastic applications, including blind rivet nuts under our Rivnut®
brand. These solutions work in concert with our world
class installation tools and automation systems. The
Bollhoff Group is a family-run company, with over
2000 employees, operating in 21 countries around the
world. Our North American headquarters and technical
center is in Troy, MI with manufacturing in Kendallville,
IN. We also maintain sales, engineering, and distribution centers in Toronto, Ontario and Queretaro, Mexico.
Booth #1323
Booth #737
BuhlerPrince Inc
670 Windcrest Dr
Holland, MI 49423
United States
www.buhlerprince.com
Booth #327
Die Casting Machines and systems made by
BuhlerPrince are ideal for the most varied processes.
Whether we are talking about aluminum, magnesium,
zinc, vacuum, structural or engine block processes
– BuhlerPrince has the right solution. BuhlerPrince supports users throughout the life-cycle of their equipment
with global services including process optimization, flow
simulations, remanufacturing, retrofits and upgrades.
132 Yeongjung-ro
Yeongdeungpo-gu 150-038
South Korea
CALS Corp., was established at November 11, 1980.
Now we are producing 300 kinds of specialty lubricants from our own factory. In Specialty Lubricant
Industry, we are the exporter to 27 countries, including
the USA, Japan, China, India, Mexico, Indonesia, etc.
as well as domestic market.
Camera Commercio Di Torino
Via S Francesco da Paola 24
Torino 10123
Italy
www.to.camcom.it
Booth #925
The Torino Chamber of Commerce is a mission-driven
public institution, representing the interests of the
local economy that can count on 237,000 companies
highly qualified in research, training and manufacturing. It creates value through initiatives that promote
local excellence abroad, in the automotive, aerospace,
subcontracting, IT, mechatronics, design & contract,
energy & environment and biomed sectors.
Canadian Automotive Innovation
Centers
c/oConsulate General of Canada Detroit
Dept of Foreign Affairs & International Trade
600 Renaissance Center Ste 1100
Detroit, MI 48243
United States
Booth #903
Three Canadian organizations will be highlighting innovative technologies and solutions for the automotive
industry. - The Canadian Consulate General in Detroit
can identify Canadian suppliers, researchers and technologies to meet your company's specific needs and
we do so free of charge. Natural Resources Canada
(NRCan) CanmetMATERIALS collaborates with industry and universities to develop materials technologies
that improve materials and manufacturing processes
through the value-added use of minerals and metals.
The National Research Council Canada (NRC)-NRC
Automotive provides strategic research, scientific and
technical services to develop and deploy solutions for
the automotive industry. See individual company listings for detailed descriptions.
CanmetMATERIALS
Natural Resources Canada
183 Longwood Rd S
Hamilton, ON L8P 0A1
Canada
www.nrcan-rncan.gc.ca/mms-smm/mate-mate/
index-eng.htm
Booth #903
At CanmetMATERIALS, NRCan's scientific and technical staff supports the competitiveness of Canadian
industry through research and development activities
involving unique, pilot scale metal casting and forming
laboratories with the support of advanced mechanical,
physical and metallurgical assessment capabilities.These
development activities target energy efficiency related
to lightweighting, materials for efficient powertrains and
materials for energy recovery in transportation.
CD-adapco
60 Broadhollow Rd
Melville, NY 11747
United States
www.cd-adapco.com
Booth #301
CD-adapco is the world’s largest independent CFDfocused provider of engineering simulation software,
support and services. We have over 30 years of
experience in delivering industrial strength engineering
simulation to a wide range of industries and application areas.
Center For Advanced Automotive
Technology
14500 E 12 Mile Rd
Warren, MI 48088
United States
www.autoaat.org
Booth #1113P
The Center for Advanced Automotive Technology is a
National Science Foundation ATE Center. It is located
at Macomb Community College. It focuses on curriculum reform and dissemination to train technicians for
new automotive technology.
s.c.p.a.
CORSO REGIO PARCO 27
Torino 10152
Italy
www.centroestero.org
Booth #925
Based in Torino, Piemonte Agency is the key reference point for foreign enterprises wishing to come to
know about the local economic system, looking for
information on business opportunities in the area and
searching for a quality business destination for direct
investment. The Agency focuses chiefly on attracting
foreign direct investment, increasing the presence of
local companies and their competitiveness on international markets, promoting the region's tourist offer and
products worldwide, training in foreign trade.
211
Chrysler Group LLC Powertrain
800 Chrysler Dr
Auburn Hills, MI 48326
United States
www.chrysler.com
Host
Company
Booth #619
Chrysler Group LLC, formed in 2009 to establish a
global strategic alliance with Fiat S.p.A., produces
Chrysler, Jeep, Dodge, Ram, Mopar, SRT and Fiat vehicles and products. With the resources, technology and
worldwide distribution network required to compete on
a global scale, the alliance builds on Chrysler Group's
culture of innovation, first established by Walter P.
Chrysler in 1925, and Fiat's complementary technology
that dates back to its founding in 1899. Headquartered
in Auburn Hills, Mich., Chrysler Group's product lineup
features some of the world’s most recognizable vehicles, including the Chrysler 300 and Town & Country,
Jeep Wrangler, all-new Dodge Dart, Ram 1500, Jeep
Grand Cherokee SRT8 and Fiat 500. Fiat contributes
world-class technology, platforms and powertrains for
small- and medium-size cars, allowing Chrysler Group
to offer an expanded product line including environmentally friendly vehicles.
Consulate General of Canada, Detroit
Dept of Foreign Affairs & International Trade
600 Renaissance Center Ste 1100
Detroit, MI 48243
United States
www.detroit.gc.ca
Booth #903
The mandate of Foreign Affairs and International Trade
Canada is to manage Canada’s diplomatic and consular
relations and to encourage the country’s international
trade. The Consulate General of Canada Detroit is
responsible for representing Canada’s interests in a territory that includes: Michigan, Ohio, Indiana and Kentucky.
Convergent Science Inc
6405 Century Ave Ste 102
Middleton, WI 53562
United States
www.convergecfd.com
Booth #1202
Convergent Science Inc. has developed the
CONVERGE CFD code for modeling internal combustion engines. CONVERGE generates a mesh automatically at runtime and varies the resolution to resolve
gradients using adaptive mesh refinement. CONVERGE
is loaded with physical models for spray, turbulence
and combustion needed to accurately model any
engine type.
Core Molding Technologies Inc
800 Manor Park Dr
Columbus, OH 43228
United States
www.coremt.com
Booth #1006
Convergent Science Inc. has developed the CONVERGE
CFD code for modeling internal combustion engines.
CONVERGE generates a mesh automatically at runtime
and varies the resolution to resolve gradients using
adaptive mesh refinement. CONVERGE is loaded with
physical models for spray, turbulence and combustion
needed to accurately model any engine type.
D
dSPACE Inc
Daesung Electric Co Ltd
8-27 B/L
743-5 Wonsi-dong Danwon-gu Ansan-si
Gtunggi-do 425-090
South Korea
www.dsec.co.kr
Booth #1326
Since its founding in 1973, Daesung Electric has
emerged as leading automotive parts supplier in Korea
with cutting edge technologies backed by expertise in
manufacturing. Today, Daesung is striving to become a
global leader with high quality products which are being
sought after by most of prestigious global automakers.
Delphi
5725 Delphi Dr
Troy, MI 48098
United States
www.delphi.com
Gold Sponsor
Pace Finalist
Booth #207
Delphi is a leading global supplier of electronics and
technologies for automotive, commercial vehicle and
other market segments. Operating major technical centers, manufacturing sites and customer support facilities in 32 countries, Delphi delivers real-world innovations that make products smarter and safer as well as
more powerful and efficient.
DG Technologies
33604 West 8 Mile Road
Farmington Hills, MI 48335
United States
www.dgtech.com
Booth #814
For a quarter-century DG Technologies, (DG), a global
company, has specialized in Vehicle Network Solutions,
providing quality products, education, consulting, and
solutions for in-vehicle networks. These standardsbased vehicle network solutions include CAN/J1939,
J1708/J1587, FlexRay, and Datalogging, used in
automotive, hybrid & electric, heavy-duty truck &
bus, agricultural, construction, military, industrial control, telemetry and more. DG TechnologiesÖVehicle
Network Solutions!
DIGA SA de CV
Calle B No 502 Parque Ind Almacentro
Apodaca Nuevo Leon 66600
Mexico
Booth #831
Diga is a manufacturer of highly sophisticated customized foam gaskets with different types of pressure sensitive adhesives. Diga offers significant advantages in
pricing and delivery. Our in-house application of hot melt
adhesives improve environmental performance at lower
costs. Our thermoforming processes enable cross linked
polyethylene foam with or without adhesive.
DSM
2267 W Mill Rd
Evansville, IN 47720
United States
www.dsm.com
Booth #1214P
DSM is a global science-based company active in
health, nutrition and materials. DSM offers a broad
range of engineering thermoplastics that meet the
high demands of automotive applications and industry
standards from lower system costs through metal
replacement to productivity improvements in plastics
processing.
212
50131 Pontiac Trl
Wixom, MI 48393
United States
www.dspaceinc.com
Booth #401
dSPACE is the world's leading provider of hardware and
software tools for developing and testing sophisticated
electronic control systems. For over 20 years, dSPACE's
high-quality, off-the-shelf software and hardware tools
have empowered engineers to design and innovate,
while dramatically reducing development times and
cost. To learn more, visit www.dspaceinc.com.
See our ad on cover 2
Dynamic Intelligent Solutions
22832 Macomb Industrial Dr
Clinton Twp, MI 48036
United States
Booth #714P
DIS extensive experience and partnerships gives us
first-hand knowledge of the requirement and challenges of product testing and measurement technology
allowing us to innovate current testing methods, delivering dynamic results to customers.
E
ECOCAR 2: PLUGGING IN TO THE
FUTURE9700 S Cass Ave Bldg 362
Lemont, IL 60439
United States
www.ecocar2.org
Booth #M208
EcoCAR 2: Plugging in to the Future is a three-year
collegiate student engineering competition established
by the United States Department of Energy (DOE) and
General Motors and is being managed by Argonne
National Laboratory. Focused on vehicle integration of
advanced propulsion technologies, the competition challenges 15 universities across North America to reduce
the environmental impact of vehicles without compromising performance, safety and consumer acceptability.
More information is available at our website and on the
competition blog at www.greengarageblog.org
Eastman Chemical
575 Maryville Centre Dr
Saint Louis, MO 63141
United States
www.eastman.com/saflex
Booth #807
Eastman Chemical is a global specialty chemicals
company that produces a broad range of advanced
materials, additives and functional products, specialty
chemicals, and fibers that are found in products people
use every day. Automotive glazing products include
Saflex® polyvinyl butyral interlayers for glass lamination and XIR® heat reduction film. Automotive engineers are taking advantage of the variety of benefits
these products offer including heat, weight and sound
reduction as well as safety, security and UV protection.
Element Materials Technology
ERGONEERS
Forza Global Solutions
51229 Century CT
Wixom, MI 48393
United States
www.element.com
9755 SW Barnes Rd Ste 680
Portland, OR 97225
United States
www.ergoneers.com
Av Insurgentes 19B-Bis
Morelos 62550
Mexico
Element is a network of independent material testing
laboratories located across Europe and the United
States of America. Element provides clients with a
wide range of materials testing, failure analysis & consultancy, product testing and specification/qualification
support. Please visit our website for more information.
Ergoneers of North America, Inc., based in Portland,
Oregon, is the North American sales and marketing
division of Ergoneers GmbH. Our products and services include Dikablis eye-tracking systems with D-Lab
software; custom driving simulators with scalable,
expandable Silab simulation software; driver distraction
& usability consulting; and specialized R&D.
Booth #503
Emergent Systems
3 Parklane Blvd Ste 1120W
Dearborn, MI 48126
United States
www.emergentks.com
Booth #1312
Emergent Systems is a provider of cutting-edge
Engineering Knowledge Management and Knowledge
Based Engineering technology.
EmiSense Technologies LLC
999 Corporate Dr Ste 180
Ladera Ranch, CA 92694
United States
www.emisense.com
Booth #1213
EmiSense develops next-generation emissions sensors, combining technical ceramics and advanced
signal processing. EmiSense leverages a unique patent
portfolio, domain-specific expertise, and global manufacturing capabilities to provide proprietary components to strategic partners around the world.
Enercon Industries
W140N9572 Fountain Blvd
Menomonee Falls, WI 53051
United States
www.enerconind.com/treating
Booth #501
The automotive industry is one of the most aggressive
users of in-line atmospheric plasma and flame surface
treatment technologies. Adhesion can be improved prior to
gluing, painting, coating and printing on metallic and polymer surfaces such as PE, PP, TPO, POM, PUR and PTFE.
Energy Research Consultants
Suite E
23342 South Pointe Dr
Laguna Hills, CA 92653
United States
www.erc-ltd.com
Booth #227P
ERC has been providing specialized services to commercial and government clients since 1990. A variety
of non-intrusive diagnostic methods are used to measure velocity, species, temperature, and various spray
characteristics such as size, velocity and mass flux.
ERC has extensive experience planning experiments
and analyzing and interpreting results obtained.
E.R. Wagner
11997 Stephane Dr
Shelby Township, MI 48315
United States
www.erwagner.com
Booth #333
For more than a century, E.R. Wagner has designed,
developed, and manufactured high-quality hinges,
stampings, and tubular products to respected manufacturers around the globe. Wagner's latest innovation
revolutionizes the hood pivot mechanism used on
class 6 – 8 trucks. Visit us at booth 333.
Booth #831
Booth #1138
Evonik Industries AG
Kirschenallee 45
Darmstadt 64293
Germany
www.evonik.com/automotive
Evonik Industries AG acts as a chemical Tier 2 supplier
in the automotive industry value chain. Innovations
from Evonik bring lightweight design and fuel-efficient
performance to a wide range of automotive applications. Specialists at Evonik are currently developing
solutions in the areas of Lightweight Design, Fuel
Savings, Lighting- and Surface Technologies.
Exco Engineering
1314 Ringwell Dr
Newmarket, Ontario L3Y 4Z6
Canada
www.excoeng.com
Booth #1205
Exco Engineering is recognized worldwide as a leader and
innovator in the design, development and manufacture
of large, high pressure die cast tooling. Exco’s 125,000
square foot facility is equipped with the most sophisticated and robust machine tools in the industry, while our
foundry offers die trial, process development, and short
run production in our 4,000 ton diecast machine.
F
4554 Glenmeade Lane
Auburn Hills, MI 48326
United States
www.fev.com
Corso Regio Parco 27
Torino 10152
Italy
www.fromconcepttocar.com
From Concept to Car is a cluster project promoting abroad leading automotive industrial skills from
Torino-Piemonte: a pool of 150 top class companies
representing a comprehensive vehicle supply chain.
The project is financed by the Torino Chamber of
Commerce and managed by Piemonte Agency for
Investments, Export and Tourism. All member companies were selected on the strength of their technical,
qualitative and managerial capabilities and altogether
they are able to manufacture a vehicle from the drawing board (styling, engineering, prototyping) to mass
production (tooling, automation, components and systems, assembly), logistics and services. The project
Team provides, free-of-charge, technical and logistical
assistance to purchasing managers of vehicle makers,
system and module suppliers. It ascertains the buyers'
needs, suggests, upon request, the most suitable suppliers and arranges match-making activities, one-toone meetings and workshops in Piemonte or on their
premises. Since 2002, From Concept to Car has been
a valuable support to purchasing managers of more
than 90 international brands
Fujipoly America Corp
900 Milik St
Carteret, NJ 07008
United States
www.fujipoly.com
Booth #939
Platinum
Partner
Booth #513
FEV is an internationally recognized leader in the design
and development of internal combustion engines, conventional, electric, and alternative vehicle drive systems,
energy technology, and a major supplier of advanced
testing and instrumentation products and services to
some of the world’s largest powertrain OEMs.
See our ad on cover 4
Ford Motor Co
2400 Village Rd
Dearborn, MI 48124
United States
www.ford.com
From Concept to Car
Booth #925
Booth #213 & M214
FEV, Inc.
Forza Global Solutions is a developer and manufacturer of surface protection systems, specifically engineered to reduce damage to class A finishes, during
the vehicle assembly process. Elimination of class A
finish dents
OEM
Booth #1119
Ford Motor Company, a global automotive industry
leader based in Dearborn, Mich., manufactures or distributes automobiles across six continents. With about
171,000 employees and about 65 plants worldwide, the
company's automotive brands include Ford and Lincoln.
Our mission is to deliver great products, create a strong
business and make the world a better place.
Fujipoly is a global manufacturing company specializing in electronic packaging components such as
Zebra® Elastomeric Connectors, Sarcon® Thermal
Interface Materials, and complex silicone rubber
extrusions and co-extrusions. With nine locations in
North America, Europe, and Asia, Fujipoly's network is
designed to supply products to customers quickly at
the local level.
G
Gamma Technologies Inc
601 Oakmont Ln Ste 220
Westmont, IL 60559
United States
www.gtisoft.com
Booth #906
Gamma Technologies develops and commercially
licenses GT-SUITE CAE software. GT-SUITE includes a
complete library of physics based modeling templates,
as well as higher level modeling templates specifically
designed for the vehicle industry. GT-SUITE applications include engine, aftertreatment, acoustics, thermal
management, HVAC, fuel systems, lubrication, driveline,
hybrids, transmission, and mechanical systems.
213
30001 Van Dyke Ave
Warren, MI 48093
United States
www.gm.com
OEM
Booth #407
General Motors Co. (NYSE: GM, TSX: GMM) and its
partners produce vehicles in 30 countries, and the
company has leadership positions in the world’s largest
and fastest-growing automotive markets. GM's brands
include Chevrolet and Cadillac, as well as Baojun,
Buick, GMC, Holden, Isuzu, Jiefang, Opel, Vauxhall
and Wuling.
German Light Weight Engineering and
Emission Reduction Technologies
20929 Sunnydale St
United States
Booth #537
This group represents several German Light Weight &
Emission companies that are currently front runner in
this technology segment. Organized by AluMag, this
group will show how these companies are working on
edge technology, global platforms and looking for a
North American project or business opportunity. The
companies that will be represented are: KSM Castings
GmbH, Rheinfelden Alloys GmbH & Co KG, Noranda
Aluminum Inc, Kienle + Spiess GmbH, Bollhoff Inc and
AluMag Automotive
Global Flock De Mexico
Eje Norte Mimiahuapan No 20 C1X1
Tetla Tlaxcala 90434
Mexico
www.globalflock.com
Booth #831
Global Flock provides high density flocking for vehicle
interior parts and panels. Flocking provides, Excellent
noise reduction, Greater resistance against wear and
abrasion, Exceptional thermal insulation. Soft touch
and an esthetically pleasing surface. Flocking a textile
surface can be applied over part geometries without
any seams covering surface errors and gaps.
GMB Korea Corporation
53 Sungsan-dong Changwon-si
Gyeongsangnam-do 642-315
South Korea
Booth #1238
Grail Engine Technologies
111 S Whittier St
Wichita, KS 67207
United States
www.grailengine.com
Booth #502
Grail Engine Technologies is an engine technology
company specializing in the design and development
of a new highly efficient and low emissions internal
combustion engine (ICE). The engine's unique uni-flow
scavenging, ìswirlî combustion and low piston crown
temperature design is a breakthrough in conventional
ICE development. With minimal industry retooling and
investment, automotive OEM's now have the ability to
achieve 2025 CAFE standards ... today!
214
Granta Design
High Precision Gages
62 Clifton Road
300 Rustat House
Cambridge CB1 7EG
United Kingdom
www.grantadesign.com
5 Oriente 210 San Andres Cholula
Puebla 72810
Mexico
Booth #419
Granta Design are the materials information technology
experts. Our materials information management solutions help automotive enterprises to: manage critical
data to improve global standardization, efficiency, and
quality; support lightweighting and emissions reduction initiatives; minimize legislative and supply chain
risk; and integrate with CAD, CAE, and PLM.
Grenzebach/Inos/LJU
38855 Hills Tech Dr
United States
www.inos-automation.com
Booth #219
Grenzebach though having its roots in fabrication lines
for glass and building materials has supplied the automotive industry for 25+ years. Machine Vision, Robot
Guidance Systems, AGV's, Monorail Systems, Friction
Stir Welding and Logistics are examples of technologies Grenzebach and its subsidiaries Inos and LJU
supply to the automotive industry.
H
Hart Energy
1616 S Voss Rd Ste 1000
Houston, TX 77057
United States
www.hartenergy.com
Booth #731
Hart Energy, a leading information provider to energy
executives, serves automotive businesses with its
fuels consulting services -- the International Fuel
Quality Center, the Global Biofuels Center, and an
annual Crude, Refining & Clean Transportation Fuel
Outlook. Headquartered in Houston, with personnel in
Washington, Brussels, Singapore and beyond, its market-leading publications include Oil and Gas Investor,
E&P, FUEL and Midstream Business. Hart Energy
boasts exceptional strength in unconventional resources, e.g., its Developing Unconventionals (DUG™) conference series and its North American Shale Quarterly
data service. The Company also provides fuel market
newsletters, member-only web portals, mapping and
GIS data sets. Visit www.hartenergy.com for more
information.
Henkel
Bronze
32100 Stephenson Hwy
Sponsor
Madison Heights, MI 48071
United States
www.henkelna.com/automotive
Booth #307
Henkel is the market leader in adhesives, sealants
and surface treatments to the transportation industry.
Backed by extensive design capabilities, a broad
product range, specific application knowledge and
technical expertise, the company delivers solutions
to all segments of automotive development. Through
powerful brands like LOCTITE®, BONDERITE® and
TEROSON®, Henkel provides significant economic and
environmental advantages for today's vehicles.
Booth #831 High Precision Gages is dedicated to supplying worldclass fixtures and gages. We utilize tooling and automation equipment designed and built to the highest
industrial standards. Our focus is to provide custom
and efficient measuring solutions for pneumatic, electronic, mechanical and vision measuring needs and
provide precision gages of all types.
Hitachi Metals America, Ltd
2 Manhattanville Rd # 301
Purchase, NY 10577
United States
www.hitachimetals.com
Booth #1000
Hitachi Metals is an integrated supplier of highly functional component materials that draw on its competitive core materials technologies. With leading global
brands in magnets, alloys and castings, Hitachi Metals
provides the auto industry with optimal solutions for
fuel economy and high performance for advanced ICE
and HEV/EV technologies.
Honda
1919 Torrance Blvd
Torrance, CA 90501
United States
www.honda.com
OEM
Booth #1007
Honda is proud to highlight the all-new Honda Accord
at this year's SAE World Congress, displaying two
unique and efficient Accord powertrains in support of
the theme Achieving Efficiency. In the Honda display
or at the Ride & Drive event, we invite you to study and
experience the Accord's new 2.4 liter gasoline Direct
Injection i-VTEC® 4-cylinder engine with Eco Assist TM
and the ultra-efficient 2.0 liter 4-cylinder engine mated
to an E-CVT in the all-new Accord Plug-In Hybrid
Electric Vehicle (PHEV). Honda is also highlighting
the all-new active safety features on the latest Honda
Accord, including our new LaneWatchTM, Forward
Collision Warning (FCW), and Lane Departure Warning
(LDW) Systems. Visit the Honda booth to see the technology behind the all-new Accord - delivering Honda's
core values of Clean, Safe and Fun-to-Drive mobility.
Council
333 N Michigan Ave Ste 2028
Chicago, IL 60601
United States
www.hktdc.com
Booth #602
Established in 1966, the Hong Kong Trade
Development Council (HKTDC) is the international
marketing arm for Hong Kong-based traders, manufacturers and service providers. With more than 40
offices, including 11 on the Chinese mainland, HKTDC
promotes Hong Kong as a platform for doing business
in China and throughout Asia.
Horiba
Bronze
Sponsor
5900 Hines Dr
Ann Arbor, MI 48108
United States
www.horiba.com
Booth #601
Intertek
70 Codman Hill Rd
Boxborough, MA 01719
United States
www.intertek.com
Silver
Sponsor
Booth #507
Jing-Jin Electric Technologies
Building A5 NO7 Jiangtai Rd
Beijing 100015
China
www.jjecn.com
Booth #608
HORIBA offers the tools and expertise to optimize
E-motor and power train development. Choose from a
full complement of simulation capabilities for real-world
test results. Virtual testing options range from battery,
environment, track, engine and driver simulation—all
the way to full vehicle simulation (including wheel-slip
events) depending on your testing needs.
Prove your product’s quality and protect your brand with
Intertek’s extensive suite of automotive testing & validation services. With 50+ years of experience, we have
the capabilities and expertise to evaluate performance
and shorten time-to-market. Let Intertek pave the way
for you to achieve greater profitability in the global marketplace.
Jing-Jin Electric (JJE) is China's leading supplier in
developing and manufacturing electric motors for automotive traction applications. JJE has an experienced
development team, a world-class testing facility in
Beijing and a 100,000-unit per year manufacturing facility in Shanghai. The company currently supplies electric
motor to many leading automotive OEM customers.
Hyundai Motor Group
Intrepid Control Systems, Inc.
Jinyoung Industrial Co Ltd
772-1 Jangduk-Dong Hwaseong-Si
Gyeonggi-Do 445 706
South Korea OEM
31601 Research Park Dr
Madison Heights, MI 48071
United States
www.intrepidcs.com
472-7 Moknae-Dong Danwon-Gu
Ansan-Si Kyunggi-do 425-100
South Korea
www.jinyoungind.com
Intrepid Control Systems provides innovative tools to
engineers in vehicle, test, and embedded engineering. With thousands of customers worldwide, Intrepid
provides embedded communication interfaces for
protocols such as CAN, LIN, FlexRay, J1850, J1939,
ISO14229 and GMLAN. Intrepid has offices in the USA,
Asia, Europe, and Australia for direct sales and support.
JinYoung is the Tier 1 company of Hyundai Motor
because JinYoung is a specialist for Hot and Cold
forging and machining. Speciality would be that all
process will be done in house to heat treatment from
material cutting.
Booth #607
Hyundai Motor Group, which includes Hyundai Motor
Company and Kia Motors, is South Korea's largestautomobile manufacturer. The automotive sector
of Hyundai Motor Group was formed in 1998 when
Hyundai Motor Company purchased Kia Motors. In
2012, HMG sold 7.1 million vehicles globally.
I
Iwis Engine Systems LP
IAV Automotive Engineering
15620 Technology Driv
Northville, MI 48168
United States
www.iav.com/us
Booth #1103
Friend of
the Industry
Booth #819
IAV has been developing automotive innovations since
forming in 1983. The company and its staff have a
uniquely broad spectrum of expertise. IAV works with
its clients from initial ideas to production, offering
extensive knowledge ranging from the entire system
right down to individual component details.
Industrias Automotrices Rc SA de CV
Canela No 350
Col Granjas Mexico DF 08400
Mexico
Booth #831
340 E Big Beaver Rd Ste 155
Troy, MI 48083
United States
www.iwis.com
Booth #412
“iwis” stands worldwide for timing drive systems.
J
JATCO Ltd
Suite 100
38700 Country Club Dr
United States
www.jatco.co.jp/ENGLISH/index.html
Booth #536
IARC has developed a proprietary formulation and process for a rubber isolator that absorbs engine vibration
and resists extremely high temperatures in the manifold of the hot end of exhaust systems. We have also
developed center bearing that resist high temperatures
and meet strict durability tests for drive shafts.
JATCO Ltd. is the world´s largest producer of
Continuously Variable Transmissions, with AT design
and test in Japan, United States, France and Korea.
Manufacturing plants are located in Japan, Mexico,
China and Thailand producing approx. 5 million ATs/yr.
JATCO USA focuses on Research and Development
Engineering, in addition to Sales and Service.
Innova Rubbers Pvt Ltd
JG&A Metrology Center
A-26/27, MIDC
Ambad, Nashik
Maharashtra
India 48098
Booth #832
Innova Rubbers PVT.LTD is located at Nashik,100 miles
north of Mumbai. Rubber to metal bonding is our core
competence. Our product range comprises of control
arm bushings, leaf spring bushings, suspension link
bushings, shock absorber bushings, power train mounts,
Strut Mounts, Torsional Vibration Dampers, Propeller
Shaft Mounts, Body. Mounts and Exhaust Hangers.
Booth #1230
JVIS USA LLC
42500 Mound Rd
Sterling Hts, MI 48314
United States
www.jvisusallc.com
Booth #331
JVIS / ImageNEXT - Camera based Advanced Driving
Assistance Systems Capabilities include hardware,
software and automotive camera development.User
Friendly Products: •Invue Rear View Camera; •Omnivue;
Surround View Monitoring; •HD Quality Display; •CDR
-Video Black Box Recording; •Lane Departure Warning
Systems; •Fleet Management Systems
K
KCW Corporation
400-86 Galsandong Dalseogu
Daegu 704-170
South Korea
www.kc.co.kr
Booth #1125
“First in Korea, Best in Wiper”
KCW is a premier supplier of wiper products to original
equipment manufacturers and to aftermarket customers. We will continue to invest in R&D and make the
best offers for customer satisfaction.
628 Monmouth Rd Unit G7
Windsor, Ontario N8Y 3L1
Canada
www.jgarantmc.com
Kienle + Spiess GmbH
JG&A Metrology Center is a global leader of Industrial
Computed Tomography Scanning Services. By utilizing
our non-destructive Industrial CT Scanning Services,
clients are able to drastically reduce pre-production
inspection costs and analyze internal failures quickly
and accurately in 3D.
Booth #537
Booth #319
Bahnhofstrasse 23
Sachsenheim 74343
Germany
www.kienle-spiess.com
Kienle + Spiess offers world-leading modern punching
and die-casting technology for manufacturing components for electric motors and generators such as stator, rotors and segment laminations. Our company´s
head office is located in Sachsenheim (Germany) since
their establishment in 1935. In addition, we manufacture at four European sites: Sachsenheim, Vaihingen
(Germany), Tokod (Hungary) and Bilston (Great Britain).
With a revenue of 200 Mio. EUR and 1200 employees,
we offer customers a unique range of products, technical solutions and services.
215
Korea Powder Metallurgy Co LTD
Librestream Technologies
111 Injusandan-ro Inju-myon
Asan-si Chungnam 336-831
South Korea
www.korpm.co.kr
895 Waverley St Ste 110
Winnipeg, Manitoba R3T 5P4
Canada
www.librestream.com
Korea Powder Metallurgy Co., Ltd. was established as
the first powder metallurgy company in South Korea
in 1967. KPM’s main products are engine head parts,
transmission parts, shock-absorber, timing system
parts, and other sintered parts for automobiles.
Librestream provides the automotive industry with a
unique Virtual Presence solution that leverages expertise, reducing travel and accelerating problem solving. With the On-sight video collaboration system,
Librestream takes experts virtually to the manufacturing
plant floor, test facility, or dealership to remotely review
new designs, maintain assets, or train junior staff.
Booth #1225
KOTRA
AIN Global
101 W Big Beaver Rd Ste 545
Troy, MI 48084
United States
www.kotra.or.kr
Booth #M1331
KOTRA serves as a vital bridge between korea and
its trading partners to promote mutual prospertiy by
facilitating international commerce and investment.
AIN Global Foundation is a non-profit entity to assist
Korean Automotive industries in their globalization. AIN
Global organizes and supports international automotive
exhibitions and business meetings.
KSM Castings GmbH
Cheruskerring 38
Hildesheim 31137
Germany
Booth #537
KSM Castings as a full service supplier develops and
produces cast aluminum and magnesium products (e.g.
engine cradles, subframes, steering knuckles, wheel
carrier, BiW structures, transmission housings, pinion
housings, high pressure pump housings, weldable
structures and camshaft carriers ) for the automotive
industry.
Kyowa Americas Inc
39555 Orchard Hill Pl Ste 159
Novi, MI 48375
United States
www.kyowa-ei.com
Booth #321
Lotus Engineering
Hethel
Potash Lane
Norwich NR14 8EZ
United Kingdom
www.lotuscars.com/engineering
Booth #1031
Lotus Engineering is one of the world's leading automotive engineering consultancy and advanced technology companies. With facilities in the UK, USA, Japan
and China we provide technology and services to many
of the world's automotive manufacturers and suppliers,
delivering anything from a component to entire powertrain or vehicle programmes.
The Lubrizol Corporation
29400 Lakeland Blvd
Wickliffe, OH 44092
United States
www.lubrizol.com
Friends of
the Industry
Booth #631
Lubrizol is the only additive company that covers
all on and off-road driveline applications. With our
unparalleled breadth and depth of knowledge, superior
technical facilities and talented people, we continue
to introduce innovative additives for gear oils, transmission fluids and off-highway fluids. Lubrizol is the
driveline technology pioneer providing a competitive
advantage to our customers through market-driven,
superior chemistry.
See our ads on cover 3 and page 3
L
Lacks Wheel Trim Systems
Suite 500
39500 Mackenzie Drive
Novi, MI 48377
United States
www.evolvehybrid.com
Booth #325
Lacks Wheel Trim Systems LLC, a distinct business
unit of Lacks Enterprises, Inc., is a full-service supplier of automotive wheel components and systems.
Its Metalltec™ and Chromtec® wheels, Spinelle™ and
Selective-Spinelle™ metal finish brands, offer customers industry firsts in wheel design and finish flexibility.
216
Government of Macedonia
Partizanski Odredi 2 PO Box 311
Skopje 1000
Macedonia
www.fez.gov.mk
Booth #606
We will guide you throughout the decision-making
process and assist you in choosing Macedonia as your
next investment destination. To gain a competitive
advantage in the automotive market and take advantage of our winning combination of the lowest operating cost in Central and Eastern Europe, educated and
available workforce, and the unbeatable incentives
offered in the Free Zones.
MAENA
Calle B Lote 9 Mineral de la Reforma
Hidalgo
Mexico
Booth #831
Maena is a company which mission is to meet the
demand of stamped metal parts for the automotive
and appliance industries, with adherence to quality
standards and cutting-edge technology. We design
solutions to optimize manufacturing processes and
increase cost savings.
Manthey Redmond Corp
10940 Wilshire Blvd Ste 1600
Los Angeles, CA 90024
United States
www.mantheyredmond.com
Booth #936
Manthey Redmond Corp is a California based public
corporation established to commercialize its patented
axial piston engine technology.
Marsilli Group
11445 Cronridge Dr
Owings Mills, MD 21117
United States
www.marsilli.com
Gold
Sponsor
Booth #1101
Booth #439
KYOWA has manufactured many innovative instruments
such as, Strain Gages, Strain Gage type Sensors, and
Data Acquisition Systems since opening in 1949. In
our 64-year history, we have created total measurement
systems in various measurement fields. At this conference, we are featuring our acceleration sensor and
DAS, related to “Pedestrian Protection Test”.
M
Luvata Appleton
553 Carter Ct
Kimberly, WI 54136
United States
LUVATA.COM
Booth #531
Luvata is a world leader in metal solutions manufacturing
and related engineering services. Luvata's solutions are
used in industries such as renewable energy, power generation, automotive, medicine, air-conditioning, industrial
refrigeration, and consumer products. The company's
continued success is attributed to its longevity, technological excellence and strategy of building partnerships
beyond metals. Employing over 6,400 staff in 14 countries, Luvata works in partnership with customers such
as Siemens, Toyota, CERN, and DWD International.
Marsilli is the technological leader in automotive coil
winding and assembly processes driving innovations in
solenoid, relay, transformer, and stepper motor manufacturing for fuel injectors, transmissions, gauge clusters, ignition systems, etc. Marsilli’s latest innovations
have occurred in the motor winding/manufacturing
process, yielding enhanced motor performance, higher
reliability, and lower cost.
MEET Automotive
39 East 3rd Ring Road
Room 2503

Event Guide

Transcription

Similar documents

U.S. Communities Featured Products

Dilawri Corporate Fleet Program

gokartsusa 250 - Gokarts USA, Go Karts Mini Bikes, Dune Buggies

CAMPING** Gennes - Camping Au Bord de Loire

Firehouse hosts Great Big Home Show

Formula SAE - Student Central

Advanced Driver Assistance System Synergy

Dual Port, Four Barrel, Aluminium lnlet Manifold. Crane Cam and

Altrom Group - The Canadian Business Journal

KFOR Chroninle_MASTER_August_2014.indd