Havis-Shields Stout Mount Console

Stout Mount
™
Optional Equipment
Sold Separately
Stout
Mount
Computer Mount Console
C-SM-600
6” Low Profile Stout Mount Series Console
• 3” high, 9” wide, 6” length, (low profile)
• Adjustable height (Expands to accept items deeper than 3 inches)
• Accepts Havis-Shields Consolidator® accessories & control head
equipment brackets
• Includes up to 6” of C-EB equipment brackets or C-FP filler plates
™
C-PMS
Printer Mount Slide Tray
• Bolts to Stout housing or any flat surface
• Slides out towards passenger side
• Designed for Pentax Pocketjet Printer only
• Order C-3610 Printer Mount housing separately
Critical Measurements
C-SM-830 Console
Outside Width = 9.00
7.75
Manufactured By:
7.25
7.00
6.375
5.75
5.125
4.625
4.00
3.50
Distributed By:
It’s Smart, It’s Safe, It’s Stout!
E Q U I P M E N T C O R P O R AT I O N
75 Jacksonville Rd. Warminster, PA 18974
Phone: 1-800-524-9900 • 215-957-0720
Fax: 215-957-0729 • Web: www.havis.com
C-SM-NPR-9-06
Stout Mount Equipment Console
™
Optional Equipment
Ideal Mounting System
C-SM-830 shown with
Motorola MW800 monitor
& keyboard, and Pentax
PocketJet printer
Sold Separately
4
3
2
•
•
•
•
•
•
•
•
Low profile, safe and strong.
Specifically designed for sturdy, compact computer mounting.
2 piece housing allows for adjustable height (Expands 1” or 2” to provide additional internal mounting depth)
Independent keyboard and monitor brackets allow installer to customize height positioning.
Swing arm feature provides easy and comfortable positioning of keyboard or laptop.
Mounts to vehicle hump bracket or trak mount base, ordered separately (with trak mount recommended)
Accepts all Consolidator® equipment brackets & filler plates (Up to 8”).
Modular design allows for add-on options such as:
• Slide out printer mount (C-PMS)
• Low profile console extension (keeps control heads below seats) (C-SM-600)
• Cup holder, lighter outlets, & most Havis-Shields Consolidator® accessories.
1
Shown with optional C-3065-3
5
Assembled Part Breakdown:
1
2
3
4
5
C-SM-830 (Housing only)
C-SM-SA-1
C-3082-1
C-SM-MMP
C-PMS
C-SM-830
8” Enclosed 30° Angle Stout Mount Series Console Housing
7.25” high, 9” wide, 13” length, 7.75” max. depth, min. depth 3.5”
C-SM-SA-1
Mounting Bracket Complete with Swing Arm Adapter for Stout Mount &
Standard 9” wide Consoles
• 9” wide; 11 gauge steel with welded corners
• Solid ½” machined aluminum swing arm
• Spring pin locks arm in stored position
• Mounts to C-SM Series Console Platform
• Accepts all tilt/swivel or hat brackets
• Includes Dash Saver Bracket Assembly (C-DSB)
Heavy-Duty Swing Arm
The heavy-duty swing arm is a perfect mount for laptop computers or keyboards. The height is
set at installation so there is no need for up/down mechanisms that are rarely used. The swingarm is safely locked into stored position or released for use by a spring lock.
C-SM-830 shown with
Dell Latitude Laptop,
and Pentax PocketJet
printer
C-SM-SA
Universal Mounting Bracket for Stout Mount & Standard 9” wide Consoles
• 9” wide; 11 gauge steel with welded corners
• Mounts to C-SM Series Console Platform
• Accepts all tilt/swivel or hat brackets
C-SM-MMP
Monitor Mounting Bracket for Stout Mount & Standard 9” wide Consoles
• 9” wide; 11 gauge steel with welded corners
• Mounts to C-SM Series Console Platform
• Accepts all tilt/swivel or hat brackets (ordered separately)
• Specifically designed for monitor mount brackets (C-3522 Series)