exmark walk-behind mowers

Transcription

FNGLA
EXMARK WALK-BEHIND MOWERS
FLORIDA NURSERY, GROWERS
AND LANDSCAPE ASSOCIATION
Leading Florida’s Green Industry
Commercial 21 S-Series
The Commercial 21 S-Series is a smaller commercial-grade trim mower that’s big
on efficiency. Powered by Kawasaki FJ180V or Honda GSV engines, the simple
design allows for maximum balance and ease of maneuverability. Commercial 21 S models are available as self-propelled or hand push. Easy on/off bag design eliminates the need for levers and doors. Front height adjust and single-point rear height adjust allow for
easy handling and change in cutting height. Options include
mulch plug, rear door handle, and cushion grip controls.
Commercial 21 X-Series
Powered by premium Kawasaki FJ180V KAI series or Honda GXV engines, the Exmark Commercial 21
X-Series mower was built for commercial performance and durability. The 5”-deep cutting deck
provides an Exmark signature cut whether bagging or mulching. The innovative front height and
single-point rear height adjustments allow the operator to quickly change cutting height. On
select models, the blade brake clutch (BBC) enables operator to disengage the blades
without shutting down the engine. Mulch plug and rear door handle come
standard. Formed, steel-wear plates have been strategically placed on the edges of
the cutting deck to help protect the Commercial 21 X-Series from
impacts and abrasions. A front engine guard protects valve cover
and engine from potential impact and damage. The Exmark
Commercial 21” X-Series mower also had a 60% part reduction,
resulting in less downtime and fewer failures.
Model
Description
FNGLA Price
COMMERCIAL 21 S-SERIES
ECSKAP21
Commercial 21 S-Series push with Kawasaki FJ180V engine (180 cc)
$764.99
ECSKA21
ECSHN21
Commercial 21 S-Series self propelled zone start with Kawasaki FJ180V engine (180 cc)
$854.99
$899.99
Commercial 21 S-Series self propelled zone start with Honda GSV engine (190 cc)
COMMERCIAL 21 X-SERIES
ECXKA21
Commercial 21 X-Series self propelled zone start with Kawasaki FJ180V KAI engine (179
cc) and one gallon remote fuel tank
$944.99
ECXHN21
Commercial 21 X-Series self propelled zone start with Honda GXV engine (163 cc) and
one gallon remote fuel tank
$1,079.99
ECXKABBC21
Commercial 21 X-Series self propelled Blade Brake Control (BBC) with Kawasaki FJ180V
KAI engine (179 cc) and one gallon remote fuel tank
$1,115.99
ECXHNBBC21
Commercial 21 X-Series self propelled Blade Brake Control (BBC) with Honda GXV
engine (163 cc) and one gallon remote fuel tank
$1,259.99
ACCESSORIES
116-0522
116-0251
109-9320
116-3373
Engine Guard (Commercial 21 S-Series)
Mulch Plug (Commercial 21 S-Series)
Rear Discharge Kit (Commercial 21 S-Series, Commercial 21 X-Series)
4-Cycle Premium Engine Oil, case of 12 one quart bottles
Roberts Supply Inc 2011 FNLGA Catalog
$6.49
$6.98
$99.98
$71.88
®
FNGLA
®
Shaded area represents Roberts
Supply’s area of responsibility
Metro Walk-Behinds
Exmark’s Metro has all the features you’ll find in other premium mid-sized walk-behinds at a lower price. The
5-speed Metro allows simple cutting height adjustment by moving the axle instead of the front deck and the
cutting height can be adjusted from 1” to 4.25” in .25” increments. The Metro is powered by a 16 hp
Kawasaki engine and is available with Exmark’s Enhanced Control System or traditional pistol grip
operator controls. Other features include the TriVantage deck that mulches (with optional
mulch kit), bags or discharges, a padded knee operated shifter, Exmark’s nine-spline drive
coupler that extends the life of the drive system, and a five-gallon fuel tank.
The high-clearance deck allows for easier curb climbing and trailering. The
drive-wheel pulleys and brake drums are designed for simple, low-cost
maintenance and the drive belts can be quickly and easily changed without
the use of tools.
Metro 26”
Increase your productivity by up to 25% with the hardest-working walk-behind from Exmark.
The Metro 26” is exactly the powerful tool needed to maintain residential and small
commercial properties. The Metro 26” comes with a 6 hp Kawasaki engine with
speeds from 2.0 to 4.1 mph. The Metro 26 also offers the flexibility to
efficiently mulch or bag clippings with an optional mulch kit.
Model
Description
FNGLA Price
METRO
MG16KA322P
MG16KA362
MG16KA362P
MG16KA483
MG16KA483P
48” deck 16 HP Kawasaki Twin, Pistol Grip
$2,609.99
$2,924.99
$2,924.99
$3,149.99
$3,149.99
26” deck self propelled Blade Brake Control (BBC) with Kawasaki FJ180V KAI engine
$1,574.99
36” deck 16 HP Kawasaki Twin ECS
METRO 26”
MSKABBC26
ACCESSORIES
103-2637
109-4800
GC36MC
OCDWB01
116-3373
Front weight kit
Side discharge kit for Metro 26”
Grass catcher for 32”, 36” and 48”
Operator Controlled Discharge for 32”, 36” and 48”
4-Cycle Premium Engine Oil (1 case of 12 qt bottles)
$129.99
$89.99
$299.99
$289.99
$71.88
See page 8 for mulching kits & sulky
FNGLA
Viking
You won’t believe the control you’ll get with the Viking walk-behind. With its constant-control drive
system, downhill runaway is eliminated and the Insta-track adjustment provides effortless tracking.
For even better handling, the Viking comes standard with Exmark’s Enhanced Control System.
The ultra high-lift cutting blades and extra-deep deck give a clean, professional cut.
The Viking Hydro comes with a 16 hp Kawasaki engine. Other features include the TriVantage
deck that mulches (with optional mulch kit) bags or discharges, and five-gallon fuel tank.
Turf Tracer S-Series & X-Series
The Turf Tracer S-Series combines Exmark’s industry acclaimed full-floating Trivantage deck with its
reliable hydro system for a high performance walk-behind. The Turf Tracer S is available with a 16, 18
or 20 hp Kawasaki engine. Its true zero-turn makes this walk-behind a real performer.
All Turf Tracer S-Series models feature Exmark’s Enhanced Control System. This
unique handle design gives you greater comfort and enhanced productivity. The
cutting height can be adjusted from 1.5” to 4.5” in .5” increments. Curb climbing is a
breeze with the Turf Tracer’s high clearance and well balanced design. The
Turf Tracer S-Series also features a centered speed lever for right or left
handed use, a five-gallon fuel tank, and a forward ground speed of 6.2 mph.
Easily adjust the cutting height from 1.5” to 4.5” with the Turf Tracer X-Series’s four, quick height
adjust pins. The six anti-scalp rollers and full-floating deck give you a smooth, professional cut. The Turf Tracer X-Series is available with a 24 hp Kawasaki engine, 20 hp Kohler
Command or 21 hp Kohler EFI and comes standard with Exmark’s exclusive Enhanced
Control System (ECS), full floating deck, hydrostatic drive, and electric start. Other
standard features include large Turf-Master rear tires and smooth-tread, semi-pneumatic
front caster tires, which nearly eliminate tire repair.
Model
Description
VIKING
VH16KA362
$4,589.99
VH16KA483
$4,769.99
TTS16KA363
36” deck 16 HP Kawasaki ECS
$5,084.99
TTS16KA483
$5,624.99
TTS18KA523
$5,849.99
TTS20KAE483
48” deck 20 HP Kawasaki ECS electric start
$6,029.99
TTS20KAE523
52” deck 20 HP Kawasaki ECS electric start
$6,209.99
TTX20KCE524
52” Ultra Cut Series 4 deck, 20 HP Kohler command engine, ECS, electric start
$6,704.99
TTX20KCE604
60” Ultra Cut Series 4 deck, 20 HP Kohler command engine, ECS, electric start
$6,794.99
TTX21EKCE524
TTX21EKCE604
TTX24KAE524
TTX24KAE604
52” Ultra Cut Series 4 deck, 21 HP EFI Kohler engine, ECS, electric start
$7,199.99
$7,289.99
$7,109.99
$7,199.99
TURF TRACER S
TURF TRACER X
60” Ultra Cut Series 4 deck, 21 HP EFI Kohler engine, ECS, electric start
52” Ultra Cut Series 4 deck, 24 HP Kawasaki engine, ECS, electric start
60” Ultra Cut Series 4 deck, 24 HP Kawasaki engine, ECS, electric start
ACCESSORIES
103-2637
GC36MC
OCDWB01
Counter weight kit
Grass catcher for 32”, 36” and 48”
Operator Controlled Discharge
$129.99
$299.99
$289.99
®
FNGLA EXMARK STANDON & MULCH KITS
®
STANDON
Thanks to the innovative QuikMount system, the Exmark STANDON can easily and
quickly attach and detach from a hydro walk-behind without any tools. The STANDON
can effortlessly be folded up and secured to the engine frame, rather than the mower’s
handles. Other features include larger no-flat wheel, an expanded operator platform
with foot-guards, and a 2-position height adjustment on the wheel mount.
Model
Description
FNGLA Price
STANDON
Sulky, QuikMount system
$449.99
34” Mulch Kit
MK362
36” Mulch Kit
MK363Q***
36” Mulch Kit
116-1085
42” Mulch Kit
116-4766
42” Mulch Kit
MK443Q
44” Mulch Kit
116-1108
44” Mulch Kit
MK465
46” Mulch Kit (Series 5)
MK483Q
48” Mulch Kit
MK486
48” Mulch Kit (Series 4 & 6)
109-5980
48” Mulch Kit
MK505
116-4767
50” Mulch Kit
MK523Q***
52” Mulch Kit
MK526***
•
•
•
FR
MK343
•
LZE
LZS
LZAS
LZA
PH
32” Mulch Kit
LZX
LZZ
LCT
MK322
LZD
LZX
LXP
LHP
•
VT
26” Mulch Kit
TTS
TTHP
FMD
MK26
VH
Description
MG
Part
Number
M26
Mulch Kits
PNS
QSP
PNE
QST
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
109-5982
52” Mulch Kit
MK565
MK605
•
•
•
•
•
•
•
MK606***
2011
QT
•
•
•
•
Serial # Range
Price
Fits All Units
$79
102,000 & Above
$199
Fits All Units
$199
115,000 & Above
$199
Fits All Units
$199
Fits All Units
$179
Fits All Units
$189
Fits All Units
$199
Fits All Units
$199
600,000 & Above
$249
Fits All Units
$249
160,000 & Above
$249
Fits All Units
$249
Fits All Units
$199
600,000 & Above
$249
Fits All Units
$199
Fits All Units***
$249
320,000 & Above
$249
260,000 & Above***
$249
Fits All Units
$249
Fits All Units
$199
600,000 & Above
$249
600,000 & Above
$249
600,000 to 789,999
$249
190,000 thru 599,999***
$249
190,000 thru 599,999;
670,000 & Above***
$249
320,000 & Above
$249
Fits All Unites
$249
MK665
•
•
600,000 & Above
$249
MK725
•
•
600,000 & Above
$249
Fits All Units
$249
All Units thru
599,999***
$249
Fits All Units
$249
•
MK726***
•
•
Notes:
***If you have a machine with s/n below 540,000, your mulch kit will
require a blade with 5/8” arbor hole not provided in standard kit.
DECK SERIES GUIDE:
Series 6 - UltraCut Series 6 Deck
Series 5 = Triton Deck
Series 4 = UltraCut Series 4 Deck
(Blade bolt diameter changed at s/n 540,000)
(s/n 130,000 to 539,000 use 5/8” diameter, black colored blade.
Mulch kit blades must be ordered separately)
(s/n 540,000 and higher use 15/16” diameter, red colored blade)
FNGLA
EXMARK RIDING MOWERS
Vantage
Exmark’s Vantage mower is the industry’s ultimate, full-featured stand-on mower. Powered by 18, 20 or 24 hp Kawasaki V Twin or 25 hp Kohler EFI engines, the Vantage is
available with 36” to 52” cutting decks. The large stand-on platform
is angled to allow the operator to shift body weight for a smoother ride and the selfcompensating suspension makes standing easier for pros of all shapes. Vantage’s ergonomically designed steering system includes an
adjustable front reference bar that can control the top-end speed. Rubber heat shield separates operator from the heat of the drive
system and the centered, eight-gallon fuel tank helps maintain
consistent performance regardless of travel direction. Vantage’s
stand-on platform folds up, allowing the machine to function like a
walk-behind and maximizes trailer space. Greaseless spindles
eliminate the need for yearly greasing.
3
4
1. Large stand-on platform allows for movement
to maximize performance and conveniently folds
up, leaving plenty of room for bigger machines
on trailers.
5
2
2. Rubber heat shield separates you from the heat
of the drive system.
6
1
3. Step on and off the mower without doing any
thing more than letting go of the controls.
4. Single-point height-adjust means you can quickly
raise and lower cutting deck to meet your needs.
5. Centered, eight-gallon fuel tank helps maintain
consistent performance regardless of travel
direction.
6. Heavy-duty muffler guard protects the muffler
from the typical wear and tear.
7
Model
7. Exmark’s exclusive UltraCut™ deck cutting
technology provides beautiful results.
Description
*VT18KA363 has Series 3 deck.
FNGLA Price
VANTAGE
VT18KA363
36” Series 3 deck 18 HP Kawasaki stand-on
$6,479.99
VT20KA484
48” Ultra Cut Series 4 deck 20 HP Kawasaki stand-on
$6,929.99
VT20KA524
52” Ultra Cut Series 4 deck 20 HP Kawasaki stand-on Limited Availability
$6,839.99
VT24KA484
$7,289.99
VT24KA524
$7,379.99
VT25EKC524
52” Ultra Cut Series 4 deck 25 HP EFI Kohler stand-on
$7,964.99
See page 8 for mulching kits
®
FNGLA
®
Shaded area represents Roberts
Supply’s area of responsibility
Quest
The original premium residential rider has been newly designed for 2011. The Quest is perfect for
homeowners desiring professional results! It’s a precisely engineered, zero-turn rider, crafted to satisfy the
lawn enthusiast’s need for perfection. The Quest delivers a million dollar cut with an equally attractive price
tag. It’s the unmatched cut that you can only get from an Exmark.
The new Quest is available with a 22 or 24 hp Kawasaki gasoline-powered, vertical-shaft engine with 42” or 50” Series 1
cutting decks. The top discharge deck increases performance when bagging and the deck is easily removed for servicing.
The Quest has a 3-gallon, single fuel tank with a single fill location. The standard foot pedal allows operators to “feather”
the deck when mowing.
With ground speeds up to 7.0 mph, the Quest mows up to 2.8 acres per hour.
Model
Description
FNGLA Price
QUEST
QT22KA421
42” stamped deck, 22 HP Kawasaki gasoline-powered, vertical-shaft engine
$3,199.99
QT24KA501
50” stamped deck, 24 HP Kawasaki gasoline-powered, vertical-shaft engine
$3,599.99
116-4766
42” mulching kit for 42” QT22KA421
$189.99
116-4767
52” mulching kit for QT24KA501
$199.99
79011
Sunshade for 2011 Quest
$139.99
79014
Hitch kit for 2011 Quest
$27.99
109-9828
Exmark Premium Hydro Oil, case of 12 one quart bottles
116-3373
Exmark 4-Cycle Premium Engine Oil, case of 12 one quart bottles
$107.88
$71.88
FNGLA
Pioneer
Exmark continues to lead the way in zero radius turn technology with the NEW Exmark Pioneer Series. The Pioneer uses a
patented cutting deck design, producing professional results and improving cutting efficiency. These zero-turn riders increase
rider comfort, improve overall productivity, and simplify maintenance providing years of reliable service. The Pioneer is ideal
for beginning and part-time landscape professionals who typically mow fewer hours yet desire the highest level of cut quality
in a value package. The Pioneer is also perfect for the acreage owner who wants a commercial mower for personal use.
• Patented full-floating 48” or 52” UltraCut Series 2 cutting deck
with anti-scalp rollers
• 22 or 24 hp Kawasaki® V-Twin engines provide speeds of 7 mph
forward and 5 mph reverse
• Hydro-Gear ZT 2800 hydrostatic drive system delivers a smooth
drive experience and years of reliable service
• Foot-operated Quick Height Adjust System allows fast and easy
height adjustments
• Patented full-floating 44”, 48” or 52” UltraCut Series 3 cutting
deck with anti-scalp rollers
• 20, 22 or 24 hp Kawasaki® V-Twin engines provide speeds of 8
mph forward and 5 mph reverse
• Heavy-duty canister air filtration system simplifies maintenance
and boost overall productivity
• Foot-operated Quick Height Adjust System allows fast and easy
height adjustments
Model
Description
FNGLA Price
PIONEER E-SERIES
PNE22KA482
48” Series 2 fabricated deck, 22 HP Kawasaki engine
$4,859.99
PNE24KA522
52” Series 2 fabricated deck, 24 HP Kawasaki engine
$5,219.99
PIONEER S-SERIES
PNS20KA443
44” Series 3 fabricated deck, 20 HP Kawasaki engine with heavy duty air cleaner
$5,579.99
PNS22KA483
$5,849.99
PNS24KA523
$6,209.99
ACCESSORIES
116-1351
Jack
116-0516
Sunshade kit
$89.99
$199.99
®
FNGLA
®
Lazer Z E-Series
The Lazer Z E-Series is available with 48” – 60” UltraCut Series 4 cutting decks and 20-24 hp
Kawasaki FS or FX engine or 27 hp Kohler engine. Features of the Lazer Z E include Exmark
exclusive Parker unitized pump and wheel motor system with no hoses, integrated cooling
fans and 1.7 quart integrated reservoir for improved performance and reduced
maintenance. A welded, heavy-duty 1.5” X 3” tubular steel unibody for increased
durability. Single 8-gallon fuel tank with one fill location reduces your time at gas pump.
Lazer Z S-Series
The Lazer Z S-Series is the evolution of the industry-defining
zero-turn mower. Powered by 22 – 29 hp Kohler
Command Pro V-Twin, EFI, and Kawasaki V-Twin
engines, the Lazer Z S-Series is available with 48”
72” full-floating UltraCut Series 4 decks. Features
of the Lazer Z S-Series include heavy-duty canister air
filtration system that improves engine life, 12-gallon single fuel tank with single fill
location, and a high-back Elastomeric Vibration Control (EVC) seat. Exmark’s
exclusive Parker unitized 12 cc pump and wheel motor system with no hoses,
integrated cooling fans and 1.7-quart integrated reservoir provides improved
performance and reduced maintenance.
Model
Description
FNGLA Price
LAZER Z E-SERIES
LZE20KA484
48” Ultra Cut Series 4 deck, 20 HP Kawasaki engine
$6,929.99
LZE22KA484
$7,109.99
LZE24KA524
$7,109.99
LZE27KC604
60” Ultra Cut Series 4 deck, 27 HP Kohler engine
$7,919.99
LAZER Z S-SERIES
LZS22KA484
48” Ultra Cut Series 4 deck, 22 HP Kawasaki Twin engine
$7,739.99
LZS23KC524
52” Ultra Cut Series 4 deck, 23 HP Kohler Command engine
$8,099.99
LZS25KC604
$8,909.99
LZS27KC524
$8,639.99
LZS27KC604
$9,179.99
LZS29KA724
$9,809.99
LZS25EKC604
60” Ultra Cut Series 4 deck, 25 HP Kohler EFI engine
$9,359.99
LZS29EKC724
$10,259.99
ACCESSORIES
109-9487
Hitch kit
$49.99
109-9694
12 volt adapter
$29.99
116-0062
Comfort Ride seat suspension kit
$279.99
116-0513
Sunshade kit
$199.99
116-0941
Seat tilt frame & 3D ISO system kit
$149.99
116-1049
Receiver for jack (Lazer)
$49.99
116-1351
Jack
$89.99
OCD02
$289.99
FNGLA
Lazer Z X-Series
When developing Exmark’s Lazer Z, nothing was overlooked. If a system didn’t exist, Exmark created it. The result?
Meticulous enhancements to improve performance and reduce maintenance. Intentional modifications that increase
durability and reliability. And a thoughtful redesign to ensure operator comfort and boost overall productivity.
Powered by Kohler® Command Pro V-Twin or Kawasaki® V-Twin engines, ranging from 23 hp up to 38 hp. Available with
48” – 72” full-floating UltraCut® Series 6 cutting decks, incorporating the best features of the classic UltraCut and the
Triton spindle assembly.
The Lazer Z was crafted around a welded heavy-duty 1.5” X 3” tubular steel unibody frame. It
features an Exmark exclusive Parker unitized pump and wheel motor system with no hoses,
integrated cooling fans and 1.7 quart integrated reservoir. A heavy-duty canister air filtration
system improves engine life and simplifies maintenance. The digital diagnostic screen monitors
the electronic fuel gauge, OPC safety switches, digital hour meter and a battery voltage
warning. A 12 gallon single fuel tank with one fill point reduces time at the gas pump.
And smooth tread, semi-pneumatic, no-flat, front caster tires increase reliability.
Model
A standard for the Lazer Z mower is the new high-back, two-tone,
bolstered seat with Elastomeric Vibration Control (EVC) material.
The flip-up seat features adjustable back pitch and forward to back
slide for a customizable ride. For added operator comfort the seat
is mounted on the innovative Seat Isolation System which reduces
vibrations, bumps and jarring.
Description
FNGLA Price
LAZER Z X-SERIES
LZX23KC486
$8,639.99
LZX24KA526
$9,089.99
LZX27KC526
$9,269.99
LZX27KC606
$9,899.99
LZX29KA606
$10,079.99
LZX29EKC606
$10,529.99
LZX34KC606
$10,709.99
LZX34KC726
$11,159.99
LZX38KC606
$11,159.99
LZX38KC726
$11,519.99
ACCESSORIES
109-9487
Hitch kit
$49.99
109-9694
12 volt adapter
$29.99
116-0062
Comfort Ride seat suspension kit
$279.99
116-0513
Sunshade kit
$199.99
116-4678
Premium suspension seat
$599.99
116-1049
Receiver for jack (Lazer)
$49.99
116-1351
Jack
$89.99
OCD02
$289.99
®
FNGLA
®
Lazer Z D-Series
The Exmark Lazer D-Series provides heavy-duty, diesel performance in a commercial Z. The
Exmark D-Series includes a B20 biodiesel ready, 25 hp Kubota liquid-cooled engine that lowers
mower emissions and reduces environmental impact.
The Exmark Lazer D-Series comes equipped with either a 60” or 72” Triton
cutting deck allowing operators to mow up to 8.7 acres per hour. The 25 hp
Kubota liquid-cooled diesel engine produces speeds of up to 12 mph forward
and 8 mph in reverse.
The heavy-duty canister air filtration system improves engine life while minimizing
maintenance. The Lazer D-Series is the ultimate durable, stable and reliable
zero-turn, commercial-grade diesel powered mower for the landscape
professional.
Model
Description
FNGLA Price
LAZER Z D-SERIES
LZD25KD605
60” Triton cutting platform, 25 HP Kubota Diesel engine
$14,399.99
LZD25KC725
72” Triton cutting platform, 25 HP Kubota Diesel engine
$15,119.99
Navigator
Exmark’s Navigator has the engineering and advanced technology needed to deliver the signature
landscaped appearance you are looking for! The Navigator possesses several features designed
specifically for highly landscaped properties. The 42” and 48” deck options create an
unmatched finished appearance on a variety of grass types and mowing conditions. Even
those with the most refined expectations will be satisfied with the Navigator’s results.
The Navigator’s compact design enables it to access tight spaces in highly landscaped
areas. Plus its 4 5/8” depth of deck allows for superior cutting performance.
The Navigator also features the FeatherTouch Control System. The exclusive
mowing system’s ultra-smooth operation allows for precise turns and
accurate mowing lines.
Model
Description
FNGLA Price
NAVIGATOR
NAV2042KC
42” Center Discharge cutting deck, 20 HP Kohler Command, 9.5bu collection hopper
$11,339.99
NAV2048KC
$11,429.99
NAV2742KC
$12,239.99
NAV2748KC
$12,329.99
NAV2542EKC
42” Center Discharge cutting deck, 25 HP Kohler EFI, 9.5bu collection hopper
$12,689.99
NAV2548EKC
48” Center Discharge cutting deck, 25 HP Kohler EFI, 9.5bu collection hopper
$12,779.99

exmark walk-behind mowers

Transcription

Similar documents

nordhavn 62

Sensation ADA Deck Plan

Sensation Deck Plan PDF

LOVE KAWASAKI

Fontaine Magnitude 55L Lowbed Find out why

9703 Juniper Court - Single Property Websites

E•deck - mangaris.com

the brochure - X

Magnitude 55L Plus - Fontaine Heavy-Haul

Leander - Aypioss