Specifications - Undermount Series
Transcription
Specifications - Undermount Series
U-5050 Features and Specifications: Double equal bowl kitchen sink. 31-1/2” x 18-1/8” x 8-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-6040R Features and Specifications: Large/small bowl kitchen sink. 31-1/2” x 20-1/8” x 8-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-6040L Features and Specifications: Large/small bowl kitchen sink. 31-1/2” x 20-1/8” x 8-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-3018 Features and Specifications: Large single bowl kitchen sink. 30-1/2” x 18-3/8” x 9-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-2321 Features and Specifications: D-Shaped single bowl kitchen sink. 22-5/8” x 20-1/8” x 9-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-2418 Features and Specifications: Single bowl kitchen sink. 24-1/8” x 18-1/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-1517 Features and Specifications: Bar/prep sink. 14-5/8” x 16-3/4” x 8”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com U-1113 Features and Specifications: Bar/prep sink. 11-1/2” x 13-1/2” x 6-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. UNDERMOUNT SERIES Model: TOP ELEVATION FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com UNDERMOUNT SERIES Model: UV-1515 Features and Specifications: Vanity sink. 14-1/2” x 14-1/2” x 5-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with rubber pads for sound absorption. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be undermounted to all solid surface and stone products. 1/8” to 1/4” overhang recommended. Cannot be undermounted to laminate. Supplied with mounting clips and template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. This sink does not have an overflow. ADA Compliant when installed per Americans with Disabilities Act Accessibility Guidelines, Section 606 Sinks. TOP ELEVATION 14-1/2” 14-1/2” FRONT ELEVATION SIDE ELEVATION ALL DIMENSIONS ACCURATE TO 1/4” U-5050 shown undermounted in granite. Karran USA ● U-2321 shown undermounted in quartz. 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com