Specifications - Edge 300 Series

Transcription

Specifications - Edge 300 Series
EDGE SERIES
Model:
E-360R
Features and Specifications:
















Large/small bowl kitchen sink.
32-3/8” x 21-1/8” x 8-3/8” / 6-1/4”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Lowered bowl divider [height - 6-3/4”].
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer baskets shown not included with sink.
TOP ELEVATION
4-1/2”
4-1/2”
7-3/8”
6-3/4”
21-1/8”
18-1/2”
16”
14-3/4”
13-5/8”
32-3/8”
FRONT ELEVATION
SIDE ELEVATION
6-1/4”
8-3/8”
8-3/8”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-350
Features and Specifications:
















Double equal bowl kitchen sink.
32-3/8” x 19” x 8-1/2”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Lowered bowl divider [height - 6-3/4”].
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer baskets shown not included with sink.
TOP ELEVATION
6”
7”
19”
16-1/2”
16-1/2”
14-1/8”
14-1/8”
32-3/8”
FRONT ELEVATION
SIDE ELEVATION
8-1/2”
8-1/2”
8-1/2”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-340
Features and Specifications:















Extra large single bowl kitchen sink.
30-3/4” x 18-7/8” x 9”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
TOP ELEVATION
5”
14-1/8”
18-7/8”
16-3/8”
28-3/8”
30-3/4”
FRONT ELEVATION
SIDE ELEVATION
9”
9”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-330
Features and Specifications:















D-shaped single bowl kitchen sink.
23-3/8” x 21-1/8” x 9”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
TOP ELEVATION
5”
10-1/2”
18-3/4”
21-1/8”
21-1/8”
23-3/8”
FRONT ELEVATION
SIDE ELEVATION
9”
9”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-320
Features and Specifications:















Single bowl kitchen sink.
24-1/8” x 18-1/8” x 9”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
TOP ELEVATION
4-1/2”
10-7/8”
18-1/8”
15-3/4”
21-3/4”
24-1/8”
FRONT ELEVATION
SIDE ELEVATION
9”
9”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-315
Features and Specifications:















Bar/prep sink.
15-7/8” x 17-7/8” x 8”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
TOP ELEVATION
5-1/2”
6-3/4”
17-7/8”
15-5/8”
13-5/8”
15-7/8”
FRONT ELEVATION
8”
SIDE ELEVATION
8”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-310
Features and Specifications:















Bar/prep sink.
12-7/8” x 14-7/8” x 6-1/2”.
Manufactured from Type 304 stainless steel.
18 Gauge.
Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 3-1/2”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
TOP ELEVATION
12-3/8”
6-1/4”
14-7/8”
5-1/4”
10-3/8”
12-7/8”
FRONT ELEVATION
SIDE ELEVATION
6-1/2”
6-1/2”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
Model:
E-305
Features and Specifications:















Vanity sink
15-1/4” x 15-1/4” x 5-3/4”.
Manufactured from Type 304 stainless steel.
18 Gauge.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 1-3/4”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
This sink does not have an overflow.
ADA Compliant when installed per Americans with Disabilities
Act Accessibility Guidelines, Section 606 Sinks.
TOP ELEVATION
15-1/4”
6-1/2”
6-1/2”
13”
15-1/4”
13”
FRONT ELEVATION
SIDE ELEVATION
5-3/4”
5-3/4”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com
EDGE SERIES
E-303
Model:
Features and Specifications:














Vanity sink
17-1/2” x 14-3/8” x 5-3/4”.
Manufactured from Type 304 stainless steel.
18 Gauge.
1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 1-3/4”.
Sink surface has a brushed soft satin finish.
Can only be installed in new countertops, not existing countertops with existing sink cutout.
Undermount installation required. May not be top mounted.
This sink may be bonded seamlessly in solid surface and laminate.
This sink may be undermounted to all stone products. 1/8” overhang recommended.
Supplied without mounting adhesive, clips or template.
Digital templates for CNC machines are available at www.karran.com.
Strainer basket shown not included with sink.
This sink does not have an overflow.
ADA Compliant when installed per Americans with Disabilities
Act Accessibility Guidelines, Section 606 Sinks.
TOP ELEVATION
17-1/2”
3-1/2”
7-3/4”
15-1/2”
14-3/8”
12-1/4”
FRONT ELEVATION
SIDE ELEVATION
5-3/4”
5-3/4”
ALL DIMENSIONS ACCURATE TO 1/4”
Recommended edge profiles in solid surface
Shown in Laminate
Installation: Seamless
Edge Series Sink Installed in Laminate
Edge Series Sink Installed in Solid Surface
Shown in Solid Surface
Installation: Seamless
Shown in Stone
Installation: 1/8” Overhang
Karran USA
●
Karran, your source for seamless integration
1291 East Ramsey Rd, Vincennes, Indiana 47591
●
T: 866.452.7726
F: 812.885.2440
●
www.karran.com