FM in Power Vertical_DOC#CIGMKTG 0315 1901

Clean, Safe, Efficient Power
Comprehensive Solutions
TURBINE
SECTION
DM
PLANT
PROCESS
ANALYTICS
VIBRATION
MONITORING
BOILER
SECTION
CONTROL
VALVES
STEAM AND
WATER
ANALYSIS
SYSTEMS
FLOW AND
LEVEL
METERING
FLUE GAS
PATH
UTILITY
GAS
EMISSION
MONITORING
PRESSURE AND
TEMPERATURE
MEASURING
INSTRUMENTS
COOLING
TOWER
ENERGY
AIR
SOLUTIONS
INDUSTRY
AND SAFETY
VALVES
PROCESS
TURNKEY
AUTOMATION
PROCESS
TO BUSINESS
INSTRUMENTATION
INFORMATION
COAL
HANDLING
SECTION
FLY ASH
HANDLING
SECTION
Typical applications in power plant
K Va
A
Va
A
V
D
Va
A
V A
A
Va
Va
K
V
A
V
V
A
V
A
V
A
K
E
Va
Va
A
K A
V
A
A
Va
E
E
V
K
V
ANALYTICAL
V
VIBRATION
E
ENVIRO
K
V
ASH
FLOW & LEVEL
V
V
FURNACE
AIR INLET
A
K
A
Va
VALVES
A
AUDITS/AMCs
D
DCS/PLC
We ensure clean, safe and efficient power
Any power plant today needs to run safely, with maximum efficiency and ensure a clean and green environment.
Corrosion and erosion of turbine blades and other plant equipment not only reduce life and efficiency of the
plant, but their shutdown is unaffordable and maintenance too expensive. Vibrations of any kind can lead to
damage or even accidents. Steam leakages at high-pressure lead to costly wastage of steam and pose safety
hazards. There are many such issues that make the smooth and efficient running of a power plant, difficult.
Forbes Marshall will help you overcome each of these problems with world-class products and systems that are
specially designed.
If you are setting up a new power plant, we can contribute.
Our well-established product range works for you at practically every corner of your plant, may it be the DM
Plant, Turbine, Boiler, Fly Ash Handling Plant, Coal Handling Plant, Cooling Towers, Flue Gas Path or auxillary
systems. This product range is backed by years of proven experience and an established partnership with our
overseas principals.
We also offer our services in handling your expansion needs as consultants.
We can improve the working of your existing equipment or handle your refurbishment requirements; all this at
very high engineering standards, taking care of safety aspects and caring for the environment. Discover a big
spectrum of products for the Power Industry, ranging from Flow meters, Level Transmitters, Control Valves,
PRDS Station, Desuperheaters, Isolation Valves, Safety Valves, Drain Valves, Gate/Globe/Check/Ball Valves,
Distributed Control System, Vibration Monitoring System (TSI), Flue Gas Analysers, Steam and Water Analysis
System (SWAS) & Water Quality Analysers etc.
Steam and Water Analysis System (SWAS)
Representative Sampling – Dependable Results
Benefits of SWAS
In power plants, high-pressure boilers and steam turbines are under constant attack from erosive and corrosive element
such as Silica, Sodium, Dissolved Oxygen, Calcium, Chloride and Phosphates. Without accurate measurement and
monitoring, the plant may suffer heavy mechanical damage that may be caused due to imbalance of turbines, reduced
efficiency, deposition on turbine blades, corrosion of steam pipe work and so on.
In any power plant using steam, there are a lot of hidden culprits that slowly eat into boiler tubes, super-heaters or more
importantly the turbines. These are impurities associated with various parameters such as dissolved oxygen, silica,
phosphate, sodium, chlorides and many others. These impurities ultimately result in corrosion and deposition which can
finally lead to turbine failures / boiler shutdowns or in extreme cases, permanent damage to the equipment. The cost of
unplanned shutdown can be very high. In fact, more than 50% of the unplanned shutdowns are due to inadequate analysis
and control of impurities and the corrosion or deposition resulting from it.
In addition, we have developed iSWAS to remotely monitor health of our SWAS and setting up a bird eye view of water
chemistry parameters, centralised at our new campus at Chakan near Pune. You may like to take advantage of this facility.
This facility can help us monitor intelligent data related to process diagnostics, analyser diagnostics arriving from your SWAS
and provide you relevant tips to ensure highest up time of your SWAS and enhance plant life as well.
The Forbes Marshall advantage
• The complete design, engineering and manufacturing (including sampling system components) is done by Forbes
Marshall. We offer a completely integrated Steam & Water Analysis System (SWAS) that includes the sampling system as
well as analysers. We offer AMCs to ensure the smooth and continuous working of your SWAS system.
• We are proud to share with you that we are one of the largest SWAS supplier in the world. More than 500 + SWAS
packages are installed world wide which cater to the variety of power plants ranging from 6 MW to 800 MW generation
capacity.
• Our sample cooler designs have been validated by India's premier institutes like IIT Kharagpur and IIT Mumbai.
• We are one of very few SWAS manufacturers who have modern manufacturing and testing facilities – IBR approved, also
approved by renowned customers and consultants. We have a trained service team with more than 20 year experience of
repairing, commissioning and maintaining different analysers. Dependency on different analysers and component
manufacturers for on-site support is completely avoided.
• A unique dual expertise of steam engineering as well as control instrumentation knowledge has helped us design a n d
ensure true representative sample, it's analysis and optimum safety to the operational people and critical plant
equipment.
• Forbes Marshall makes all the critical components of SWAS such as Sample Cooler, Pressure Regulator, Back Pressure
Regulators, High Pressure Stop Valves and Chillers in-house, which make our SWAS package most reliable.
Online inspect your boiler
CTLDS
Application
Condenser Tube Leak Detection System (CTLDS)
The main intention of monitoring condensate quality is to
detect leakages in the condenser. Major leakages in the
condenser can contaminate pure condensate, making it
useless for re-use. Operation and maintenance
departments need to rectify these leakages during
planned shut-downs. Identifying area of leakages in large
size condensers can be of great help to reduce the
duration of this activity thus increasing productive time.
Wet Panel
Dry Panel
Architecture of iSWAS
Chiller Unit
Applications
• DM Plant
•
CEP Discharge
• De-aerator
•
Feed Water to Economizer
• Boiler Drum
•
Super heater
• Condenser
Sample Cooler
Continuous Emission Monitoring System (CEMs)
Solution to Pollution
Need for CEMs
Combustion of coal produces carbon dioxide and other greenhouse gases that cause climatic warming. It is the source of
sulphur oxides and nitrogen oxides, which are harmful to human health and are largely responsible for acid rain. Also, a
lesser-known fact is that emissions from coal combustion do contain naturally occurring radioactive materials like uranium
and thorium. Currently,78% electricity comes from fossil fuels, mostly coal. Besides being a finite resource, burning coal for
electricity generation is harmful to the environment. In a power boiler, coal with the help of oxygen (i.e. air) is burnt for
heating water to generate steam. To ensure proper utilisation of coal i.e. to produce maximum heat, plants need to control
the air-to-fuel ratio, in the combustion process.
Coal (C +S) + Air (O²+N²+H²O) > Heat + CO² + SO² + NOx + H²O + Ash
Combustion is the act or process of burning. To control coal consumption i.e. to maximise the efficiency of boiler and to
control air pollution, the monitoring of gas and dust emission is a must.
The Forbes Marshall advantage
• One-stop solution for combustion and pollution monitoring
• Most preferred vendor for the supply of insitu gas analyser
• Our sample cooler designs have been validated by India's premier institutes like IIT Kharagpur and IIT Mumbai.
• Unique dual beam opacity/dust monitor
• No hassles of sample conditioning & problems associated with it
• Proven track record – more than 700 installations for insitu gas analysers, more than 1600installations of in-situ dual
beam opacity/dust monitor
• We offer AMCs to ensure smooth and continuous working of Forbes Marshall Codel products.
Continuous Emission Monitoring Products
Dust Analyser
Oxygen Analyser
Gas Analyser
Velocity Monitor
Connecting to the environment
We have a server in place at Central Pollution Control Board (CPCB), Delhi in India and at different state level Pollution Control Boards
(PCB's) in India. Our data systems are transmitting live data of our gas and liquid analysers to these servers for over 2 years now. Online
Sox, Nox and PM are the mandatory parameters required by PCB from the Power Industry in India.
Applications
In today's power industry, on-line emission monitoring has become quite common. The various parameters that need to be
monitored are:
• CO monitoring at the air preheater inlet for combustion control
• SOx, NOx, CO & Dust analyser at ESP outlet duct to meet statutory requirement of PCB
• Flue gas flow measurement for WHRB
• CO analyser for coal mill fire detection system
• CO analyser for ESP protection
• Connectivity to Pollution Control Board servers meeting their norms
Turbine Supervisory Instrumentation (TSI) and Vibration Monitoring System (VMS)
Extend the life of rotating equipment
It is observed that a power plant can achieve its maximum performance or power generation if rotating equipment right
from Coal Crushers, ID / FD / PA Fans, CT Fan, CEP, BFPs and most critical rotating machines work trouble free. The heart of a
power plant, the Turbine, needs to work trouble-free. The performance of any machine or equipment can be detected by
vibrations, pressure, sound, flow etc. Among all, vibration is the most important parameter as it can analyse and detect
major machine problems like unbalance of the rotor, axial shifting of the rotor, misalignment, rotor cracks, bearing
problems, etc. Its FFT, spectrum, different plots can give information of the stability of the complete machine much in
advance, so that according to the planning, maintenance can be done on schedule and unscheduled breakdowns can be
avoided. This will reduce downtime and increase plant availability. Now-a-days the vibration monitoring system is
incorporated with advanced software aids like analysis and diagnosis tools. With this software, one can easily check the
machine performance at any time. One can see bearing-wise FFT spectrums, different kind of plots like orbit plot, bode
plots, vector plot and so on. These plots are very important to check machine behavior and problems.
Solutions from Forbes Marshall
Forbes Marshall is associated with Shinkawa, Japan since 1988. Shinkawa products meet all major global standards for
product quality, design& performance. Shinkawa systems comply fully with the API 670 standard. We have supplied systems
right from 4 MW up to 800 MW turbines. We have provided Vibration Monitoring Systems (VMS) for super thermal power
plants, auxiliaries and machinery with capacity of upto4000MW. We have more than 750 Turbo Supervisory
Instrumentation (TSI) installations in different countries. We have replaced most other non functional systems and have got
excellent feedback from the users. Forbes Marshall has a well-trained team with a capability to erect and commission the
VMS.
We provide the latest technology like online vibration analysis systems, capable of analysing and detecting all sorts of faults
in the machine train. These give all the trends, spectrum, plots, graphs, waveforms, shaft centerline etc. We can serve
remote vibration monitoring at any place with the help of web connectivity which helps to reduce down time of the plant.
Vibration Monitor
Loop Powered Solution
Extend life of rotary equipment
Sensors
Applications
In the power vertical, an online vibration monitoring system is mandatory due to critical applications like
• Turbine and generator
•
Boiler feed pump
• Cooling tower pump
•
Condensate extraction pump
• ID/FD fan
•
HT motor
• Coal handling crusher
•
Make up water pump
• Raw water pump
•
Vibration analysis and diagnostic system
Control Valves, De-superheaters, Conditioning Valves and Stations
Offering better control for power application –Operational economy with optimum control
Importance of Control Valve
Water, steam or air is used for various purposes at various conditions in power plants. It is important to precisely control the
pressure, temperature, flow characteristics of these fluids at various stages depending on the application.
Excellence from Forbes Marshall
In joint venture with ARCA Regler of Germany, Forbes Marshall designs and manufactures a complete range of control
valves, de-superheaters, combined Pressure Reducing and De-Superheating valves and stations (PRDS) for use in a wide
variety of application in boiler and turbine steam-water circuit. Our control valves are modular in design and versatile in
construction.
Forbes Marshall offers variable nozzle/fixed nozzle/ mini-cooler type de-superheaters, Ecotrol- a special designed control
valve, angle type PRDS valves for high pressure reduction and total PRDSH station for process control. We have our presence
in power plants having capacity range from 10 MW to 800 MW. It is our endeavor to highlight that with our customised
solutions, we have always been a preferred vendor to many OEMs for turbines, boilers, other equipment, consultants &
process licensers.
Control Valve Solution
Valve Station
Optimize the control
Control Valve Solution
De-superheater
Ecotrol Valve with Smart Positioner
Turbine Bypass Valve
Applications
In power plants, control valves are mandatory for control as well as isolation purpose. Some of the critical valves and applications
are:
• Burner skid for atomizing steam and LDO/HFO PCB & FCB
•
(HP/LP) Turbine bypass valve
• High pressure spray water valve
•
Low pressure spray water valve
• Soot blower valve
•
Dump PRDSH
• Gland steam valve
•
HP/LP Heater level control valve
• Auxillary PRDSH
•
Attemperator valve (SH/RH).
• Hotwell level control valve
Valve for Super Heater (SH) and Re Heater 9RH).
• De-aerator pegging steam control valve
•
BFP recirculation valve
• CEP discharge recirculation valve
•
De-aerator/Boiler level control valve
• Boiler feed water FCB (30% & 100%
Increase your power availability with our DCS
Process Automation to Business Information
Need of Automation
Looking at power demand world-wide and existing power generation capacities, the efficiency of power plant makes
enormous impact on demand supply gap and on environment too.
With technological growth, more and more efficient ways of control are being adopted by Power Industry. Forbes Marshall
has been in the field of Instrumentation and Control for several decades and has a wide experience. From the single loop
controllers to the conventional distributed control - which utilises the concept of representing the unit as a number of tags we have now come out with Unit Supervisory Functions (USF). In these USF's - groups of control functions representing
major process units and their associated control devices can be grouped and operated together.
Boiler
automation
& Burner
Management
System
Balance
of
plant
Water
treatment
plant
automation
Load
synchronization
Turbine
monitoring &
sequencing
Coal handling
plant & Flyash
conveying
automation
Process automation to business information
System Architecture
Representative Mimic
Process automation to business information
Turnkey System Solutions from Forbes Marshall
Knowledge based process automation
In a power plant the boiler could be coal fired, bagasse fired or gas fired. It is necessary to run the boiler continuously at an
optimum efficiency. The losses associated with frequent shutdown of the boiler and incomplete combustion can lead to
huge manufacturing losses. Similarly, carryover of water droplets in superheated steam can result in damage to the
superheater tubes followed by turbine and can lead to huge wear and tear costs. The de-aerator in a power boiler plays a
very important role in removal of oxygen and other dissolved gases. Dissolved oxygen in boiler feed water can corrode and
damage boiler tubes in boilers.
The System Sales Division at Forbes Marshall provides turnkey and customised solutions for boiler automation. Automation
can help to run the boiler on a continuous basis for longer periods and at an optimal efficiency. We have vast application
knowledge combined with a wide range of in-house products consisting of field instruments and control system (DCS & PLC)
and provision to procure the other products to complete the basket and provide a complete solution for your plant. Some of
the standard automation control loops that we offer are
1)
De-aerator pressure control
2)
De-aerator level control
3)
Three element drum level control
4)
Combustion control loop
5)
Furnace pressure control
6)
Oxygen trim control
7)
Attemperator control
8)
Hook up turbine controls with the Boiler control system
9)
Turbine related Jacking oil system, governing oil system and lube oil system
10) Steam water and condensate system for turbine
11) Balance of plant instrumentation
12) Burner management skid .... etc.
World of gauges
World of Gauges
Tailor-made solutions for helping your power production
Importance of gauges in the power industry
A gauge is a common component for operations in various industries. But not every gauge is created equally or made for
every situation. In these environments, gauges need to be reliable, accurate and easy to read to help prevent failure in
everyday operations. Therefore, how a gauge is constructed and tested is extremely important for reliability, safety and
peace-of-mind.
Solution from Forbes Marshall
We offer mechanical instruments for recording and indicating a wide range of pressure and temperature parameters. We
are one of the pioneers in the manufacture of gas filled dial thermometers, bi-metal thermometers, pressure gauges,
vacuum gauges, compound gauges, capsule gauges, differential pressure gauges, IBR approved gauges, comparison test
pumps, combustion test kits, Fyritekit - CO2& O2, temperature recorders and pressure recorders (mechanical /
electronics).We also supply pressure transmitters, temperature transmitters, RTDs / thermocouples.
The manufacturing process for our products is backed by quality control testing procedures and endorsed by ISO 9001
certification.
Solutions in Flow and Level measurement
Flow and Level measurement is crucial
Our group company, KROHNE Marshall provides complete solutions for flow and level measurement for various types of
power plants such as Hydro, Thermal or Nuclear. With our comprehensive range of flowmeters we can handle any
application in flow measurement of Liquids, Gases or Steam. Our advanced non-contact and guided wave radar level
transmitters measure the level of solids, powders and liquids very accurately and precisely.
Complete solutions from KROHNE Marshall
With experience of more than three decades in this area, Forbes Marshall is a respected name in Flow/Level/Density
measurement products/systems. In joint venture with KROHNE Messtechnik GmbH, Germany, we offer German precision
and ruggedness to meet the industry demand for trouble free and reliable operations.
KROHNE Marshall offerings :
Magnetic Flowmeter
Vortex Flowmeter
Highly accurate and reliable flow meters for
• Cooling in circulation system
• Acid flow measurement in DM plants
• Raw water application
Ideal flowmeter for
• Steam flow measurement
• Compressed air and gas flow measurement
• Oxygen flow measurement
Mass Flowmeter
Ultrasonic Flowmeter
Accurate mass flow and density measurement for
• Net oil consumption for start-up burner
• Fuel oil handling system
Reliable flow measurement of
• De-mineralized water (inline Ultrasonic Flow meter)
• Feed water flow consumption in nuclear power plants
• Hotwell make up flow (clamp on) flow measurement
Monitor Your Utility
Variable Area Flowmeter
Flow Switch
Continuous gas and liquid applications
• Measurement of non-conductive media (DM Plant)
• Dry-run protection of pumps
Rugged and compact switch for flow control of :
• Oil in the lubrication circuits of coal mills and turbines
• Cooling water circulation system (CW Pumps)
Guided Wave Radar Level Transmitter
Non Contact Radar Level Transmitter (Drop
antenna type Patented design by Krohne for
solid level measurement )
Universal level transmitter for the level measurement of liquids
• Level measurement of LDO/HFO
• Hot well level measurement in the water
circulation system
• MOT Level measurement
Level measurement for
• Non-contact type level measurement
• Level measurement of coal in bunkers
• Level measurement of fly ash
Applications
• Boiler Feed Water
•
Coal Bunker Level
• Cooling Water Tank
•
DM Plant (Acid/Alkali Tank)
• Fly Ash Level
•
Furnace Oil Flow/Level
• DM Water
•
Condensate Level
• Hot Well Level
•
Main Oil Tank (MOT) Level
• Compressed Air Flow Efficiency
•
Saturated Steam Flow
• Lubrication Oil Flow
Safety: synonymous with valves
High Pressure Gate, Globe, Check and Ball Valves
Need for Gate, Globe, Check and Ball valves
For all applications in the field of power, isolation is necessary for process requirement; but the mode of operation of the
valve to achieve isolation is more important.
Forbes Marshall Offerings
Reliable and efficient valves is one of the most important requirements in any power plant. It is observed that majority of
losses happen due to the leakages from pipelines and valves. With reference to the observation, we, as an organization have
worked hard on the design aspect of the valve in order to arrest these losses. Forbes Marshall is in the field of valves since
1980, engaged in manufacture of high pressure Stop valves, Safety Relief Valves, Turbine Drain Valves, Continuous Blowdown Valve in association with some of the leading valve companies in Europe.
Our GGCB (Gate, Globe, Check and Ball) Valves have received the certificate for standards like API 600/ API 6D and various
quality management certificates for manufacturing these valves. With this development, we are one of the few companies
who can cater to the complete range of the valves.
Gate Valve
Globe Valve
Check Valve
QCNRV
Safety & isolation valve
Ball Valve Safety
Relief Valve
Drain Valve
Flow Interruption Test and
Functional Capability Test
for Main Steam Isolatioin
Valve (MSIV) @ Areva GmBH,
Germany (Gate Valve)
Applications
• Nuclear Power Plants
• Coal Gas and Sea Water Desalination plants
• Mining
In Power Process, what you can't see can cost you heavily
No matter what your industry, Energy and Vibration Audit are a must for everyone
Energy Audit Service and Its Benefits
Forbes Marshall provides comprehensive services to a wide range of industries like Power, Steel, Paper, Automobile, Cement
and many more for helping them improve the efficiency of their process and enhance their energy savings.
With our in-depth know-how of energy systems, we are able to deliver great saving opportunities to our customers and
achieve energy efficiency.
We do an in-depth analysis of the system as a whole to look at the avenues for savings in the system and working with the
customers towards optimisation of the system.
Service, Perfection & Satisfaction
Scope of work for a detailed Energy Audit in a power plant
1. Boiler Efficiency
• Calculation by loss method including stack losses,
losses due to combustibles in fly ash and bottom ash
at 100 % TMCR load.
• Boiler furnace temperature mapping along with
FEGT measurement
2. Air Preheater
• Performance testing to determine air leakage/ gas
side efficiency, X-Ratio, etc.
3. Mill performance Testing
• Mill performance data analysis, specific energy
consumption, primary air velocity estimation, mill
fineness and assessment of air/coal ratio.
4.
•
Turbine Heat rate
Calculation at 100% TMCR load
5.
HP/LP heater performance testing
6. Calculation of HP/IP/LP cylinder efficiency
• Performance and study of deviation / deterioration in
the performance of condenser due to dirty tubes, air
ingress, CW inlet temperature and CW flow to be carried
out.
7.
•
•
Thermal Insulation including radiation losses
Thermography test
Heat loss calculations
8. Auxiliary Power consumption and Performance
• Evaluation of unit auxiliary power consumption &
performance including specific energy consumption
(SEC) of all critical equipments using power
analysers.
9.
•
Lighting System
Main plant boiler and turbine including office building
lux measurement and power consumption (day/night).
10. Air Conditioning System
• Power consumption by each AC system by using
power measurement analysers including cooling effect
and humidity
11. Air compressor System
• Performance of air compressors by using power
measurement analysers.
• Leakage detection and tagging.
12. Auxiliary HT motors
• Electrical parameters like current, voltage, power
factor and power by using power measurement,
• Motor Signature and harmonics analysers.
13. Transformers
• Assessment of the loading pattern of installed
transformer to identify measures for reduction of
losses.
14. Cooling Tower
• Assessment of CT effectiveness, Approach, Range,
fan efficiency and L:G ratio
15. High DM make UP and cycle losses due to
passing of Valves
• Drains passing & leakages survey boiler and turbine
side
16. Heat Transfer Efficiencies
• Estimating of heat transfer effectiveness in economizer,
water walls, re-heaters and super-heaters.
Outcome of the Energy Audit
1. Reduce Operating Cost
• Estimates costly leaks, thermal losses and artificial
demands
• Explore areas to reduce operating cost at least by
10 % and above
3. Improve Quality
• Improve quality of air, steam, electrical energy and
as per process requirement
• Stabilize system for air ,steam, water and other
utilities
2.
Improve Productivity
4.
Minimize or eliminate future capital costs
•
•
Clear picture of how your system runs over time
Solutions to production and process problems
5.
Reduction in Auxiliary consumption of power
plant
Vibration Consultancy Service
Imagine if you could monitor the health problems of Critical Rotating Machines – even before the symptoms
become evident. Forbes Marshall specialist will be promptly available at your doorstep to address the problem.
With a complete know-how of on-line vibration monitoring systems and machine details, we have developed Vibration
Consultancy, a unique service for customers in all types of industries. Through this service, we offer our clients remote
vibration analysis and give reports for all critical rotating s in the plant, by either remote monitoring of critical machines 24 X
7 and/ or periodic measurements by visits to the plant for other critical machines such as large pumps, ID/FD/PA Fans,
centrifuges, large blowers, gear boxes, motors, crushers, compressors and other rotating machines.
Our expertise :
• Survey of Rotating Machines in your plants
• Possible suggestions for Vibration Monitoring requirements
• Vibration Consultancy support for giving reports monthly /quarterly for Critical Machines and secondary Critical
Machines
• Complete turnkey execution (engineering and documentation)
• Vibration analysis and diagnosis reporting for the right time shut down to save cost
• Customized Condition Monitoring and Reporting Plan for your plant.
We secure the performance of your machine with Condition Monitoring. Knowledge and prediction have become an
integral part of machine performance. The implementation of a rigorous condition monitoring programme is strategic to
secure both, the asset and its productivity.
Working together
In today's competitive environment, all power plants look forward to solutions for efficient operation, predictive
maintenance, safety and environmental sustainability. Industries also need to follow various industry regulations and
legislation. We can work together to address all these aspects and can offer innovative technology based solutions through
our products and services.
Monitor & improve the quality
Process Analytics for optimising power generation
Monitoring and Optimization of Process Operation – Online Chemist at your service
In the Power Industry, all the processes have a common need - reliable,
accurate and timely methods for analysing process chemistry. Continuous
monitoring with online analysers enables detection of process variations
faster than laboratory-based measurements. On-line measurement is
always recommended because no external factor will contaminate the
sample and will always give exact readings, which will eventually help avoid
unwanted shutdowns. This in turn will help in reducing the operational cost.
SMARTPro® Panel and Field
Analytics from Forbes Marshall - More than analysis, Complete
Solutions
We offer you complete solutions for online measurement with a system
consisting of sensor / sensor holder / transmitter and controller. Forbes
Marshall is known for a variety of transmitters such as:
Conductivity Transmitter
We can provide a rugged and compact enclosure for all plant and process
conditions and provide combined display indication: measured parameter,
temperature, relay settings and analog outputs.
Turbidity Analyser
Dissolved Oxygen Analyser
Online monitoring of DO at ppb level is observed in high purity water, boiler
feed water and de-aerator inlet / outlet.
Silica Analyser
Silica Analysers use microprocessor technology with an inbuilt sequencer
that guarantees high performance. This analyser is used to monitor silica
content in DM plants, boiler feed water and steam.
AquaMAX Analyser
Sodium Analyser
Sodium analysers provide low-level sodium measurement in high purity
water applications. This analyser is ideally suited for monitoring sodium in
DM water, boiler feed water, superheaters, condensate and all parts of the
steam/water cycle.
Total Organic Carbon Analyser
It is a single stream analyser, which is online and fully automated, and it has
many unique features making this instrument exceptionally versatile. This
analyser is specifically used to measure TOC in petrochemical industries,
power industries and water and waste water treatment plants.
Optical DO Analyser
Online Multi-parameterAnalyser
For monitoring of pH, COD, BOD and TSS, Forbes Marshall has multi
parameter analyser. In this analyser we use Ultra violet spectroscopy
technique for getting most reliable and stable readings.
Multi Parameter Analyser
Extend life of
rotary equipment
Optimize the control
Process automation to
business information
World of gauges
Safety &
isolation valve
Monitor & improve
the quality
*
Monitor
Your Utility
DOC#CIGMKTG/0315/1901/V2.R0
Forbes Marshall Private Limited CIN No : U28996PN1985PTC037806
Connecting to the
environment
Forbes Marshall (FM) reserves the right to change the designs and/or materials of its products without notice. The contents of this publication are the property of FM and cannot be
reproduced by any other party without written permission. All rights reserved. Copyright © 2015 Forbes Marshall
Online inspect
your boiler
Forbes Marshall is a leader in process efficiency and energy conservation for Process
Industry, with over seven decades of experience building steam engineering and control
instrumentation solutions. Our unique complementary expertise enables us to engineer
customised systems that improve manufacturing processes, conserve energy and are
environmentally sustainable. We offer our customers a comprehensive range of services,
products and solutions for utilities and process control. We are present in 51 locations
globally, with 5 manufacturing facilities. Our knowledge, innovative solutions, reliable
products and global presence make us a trusted partner.
FORBES MARSHALL
FORBES SOLAR
| FORBES VYNCKE
| KROHNE MARSHALL
| FORBES MARSHALL ARCA
| CODEL INTERNATIONAL
FORBES MARSHALL STEAM SYSTEMS Pvt Ltd (Formerly Spirax Marshall Pvt Ltd) CIN No : U27109PN1959PTC011334
Opp 106th Milestone
Bombay Poona Road, Kasarwadi,
Pune 411 034. INDIA.
Tel.: 91(0)20-27145595, 39858555
Fax : 91(0)20-27147413
Email : [email protected]
B-85, Phase II, Chakan Indl Area
Sawardari, Chakan
Tal. Khed, Dist. Pune 410501. INDIA.
Tel : +91 02135 393400
A-34/35, MIDC H Block,
Pimpri, Pune 411 018. INDIA.
Tel. : +91(0)20-27442020,
39851199
Fax : +91(0)20-27442040
www.forbesmarshall.com