Engineered Fastening Solutions

Transcription

ag
em
Pa
n
an
el
eM
As
W ir
sem
b ly
Engineered Fastening Solutions
en
t
Com
p o n en t M o un
tin
g
ARaymond Tinnerman’s specialty fastener products offer a reliable means of
attaching panels, components and wiring, safely and securely to improve quality
and reduce assembly cost. In addition to an extensive plastic and metal standard
parts portfolio, our dedicated advanced engineering team is able to provide
custom solutions to meet your specific assembly needs.
This catalog highlights our best practice parts. If you cannot find a product here
to fit your need, other solutions are available within our online catalog,
www.araymondtinnerman.com.
CONTENTS
3
Introduction
4-5
Tinnerman®
Speed Nuts®
6-7
Expansion
Nuts
8-11
U-Nuts
12-13
Nut / Bolt
Assemblies
14-15
Lock-Nuts
Self-Thread
16-21
Palnut®
Push-Ons
22-25
Trim Clips
26-28
Panel Clips
29
Push-Pins / Rivets
Darts **NEW**
30-35
Wire
Management
2
Introduction
ARAYMOND
ARaymond has always envisioned the future with a combination of imagination and realism. Its success can primarily
be attributed to the long-term vision of its leaders and their ability to anticipate market trends by making crucial
and early strategic decisions. Since 1865, ARaymond supported the glove, shoe, leather, textile, radio, construction,
and automotive industries, each representing a decisive stage in the company's progression. Today, the group holds
800 industrial patents. Always a prime mover, the innovative spirit inspired by Albert-Pierre Raymond has
contributed to the independence of the group companies through five generations, and counting...
In 2009, ARaymond and Tinnerman came together to form one incredibly powerful fastener company.
CLOSE TO YOU. EVERYWHERE.
An active and multicultural network
ARaymond Network is an active and multicultural network of independent companies operating on five continents:
EUROPE, the AMERICAS, ASIA and NORTH AFRICA.
ARaymond is active today where its main clients operate: BRAZIL, CANADA, CHINA, CZECH REPUBLIC, FRANCE,
GERMANY, HUNGARY, INDIA, ITALY, JAPAN, POLAND, ROMANIA, RUSSIA, SINGAPORE, SLOVAKIA, SPAIN, SWEDEN,
TUNISIA, TURKEY, U.K., USA.
The closeness to our clients is enhanced by the ARaymond Network, which encourages the sharing of skills, ideas and
expertise through a horizontal structure that is adaptable. These exchanges between countries are a source of
enrichment for our employees and of added value for our clients.
3
Speed Nuts
Tinnerman® History
TINNERMAN® AND SPEED NUT® HISTORY
Tinnerman was founded in Cleveland, Ohio in 1870 by
George Tinnerman and was known as the Tinnerman
Stove Company, makers of high-end stoves. In 1936,
Albert, George's son, created a spring steel fastener
known as the "Speed Nut®" in order to solve an ongoing
issue with stove shipping. George Tinnerman, grandson
of the founder, commercialized Speed Nuts® in markets
beyond stoves - so successfully, in fact, that the stove
business shut down entirely. Tinnerman® became a
trusted supplier of fasteners for WWII aircraft.
According to a 1947 Fortune Magazine article, the
Tinnerman® Company used aggressive techniques to
change the automobile industry. The time-saving
fasteners held parts in place without the need for
welding or riveting. At the time, an automobile
manufacturer doubted that it was strong enough to hold
fenders to bodies. A.H. Tinnerman responded by
hoisting a 3,325 pound vehicle off the ground supported
by a Speed Nut®. A.H. also created a plan to save Ford
millions of dollars by changing the way automobiles were
assembled - finding 400 unique places and applications
for Tinnerman® products. It became an automotive
revolution.
SPEED NUTS®
ARaymond Tinnerman Flat-Type Speed Nuts® are onepiece, self-locking, heat-treated, spring-steel fasteners
that replace threaded nuts, lock washers and spanner
washers. On many applications they eliminate timeconsuming assembly operations.
Fast and easy to apply, Speed Nut® Fasteners provide
maximum holding power at minimum cost per fastener.
They don't shake loose from vibration, yet can be easily
loosened without worry about rust-frozen screw threads.
Industries and Applications
• Smaller components where space is premium
• Inside small electrical or mechanical components
Benefits
• Requires less torque than standard hex-nuts
• Can be installed prior to painting processes so threads
won't fill
Our Legacy - Our Future
The original flat-type Speed Nut® is still used today, but it
has been replaced by self-retaining versions. Products like
U-nuts and expansion nuts use the same technology and
features that revolutionized assembly processes in the
United States and throughout the world.
4
Most of the products featured on this page are manufactured with spring
steel. ARaymond Tinnerman offers these parts in corrosion protection
and/or aesthetically pleasing finishes. Parts may also be available in
stainless steel.
Nuts
Self-Locking Threaded Nuts
Speed Nut® - Flat Type
Part Number
Screw Size Length
(SS)
(l)
0: Round
1: Rectangular
Width Material
Design
Thick. (s) Variations
(b)
C07795-440
4-40
0.440
0.250
0.012
1D
C08595-012
6-32
0.380
0.343
0.012
0F
1
C07000-8
8-15;8-18
0.630
0.410
0.028
C07000-832
8-32
0.500
0.310
0.017
1
C07868-832
8-32
0.820
0.640
0.017
0EFZ
C07000-10
10-12;10-16
0.750
0.500
0.031
1
C00917-10Z
10-16
0.870
0.375
0.031
1
C01151-1024
10-24
0.750
0.437
0.022
1BC
C01150-1024
10-24
0.750
0.437
0.022
1B
C00166-1420
1/4-20
0.820
0.640
0.025
0EFZ
C07000-1420
1/4-20
0.750
0.500
0.025
1
C09375-012
1/4-20
1.310
1.312
0.012
1A
C09186-014
5/16-18
0.880
0.687
0.014
0EAF
C08617-017
3/8-16
1.000
0.687
0.017
1A
C01156-014
7/16-20
0.910
0.687
0.014
0AF
D07516-017
1/2-13
1.220
0.875
0.017
1A
Speed Nut® - Twin Type
Part Number
Screw Size
Length
(l)
Width
(b)
Screw
Gap (x)
Material
Thickness
C70926-440
4-40
1.254
0.250
0.964
0.011
C06069-632
6-32
1.625
0.375
1.000
0.017
C06069-832
8-32
1.625
0.375
1.000
0.017
C14187-8
8-15;8-18
2.150
0.375
1.500
0.028
C00385-1420
1/4-20
2.380
0.500
1.500
0.025
Part Number
Screw Size
(SS)
Diameter
(SD)
Hole
Diameter
(R)
NR 440004
4-40
0.250
0.141
0.156
NR 620005
6-18
0.157
0.185
NR 818005
8-18
0.312
0.629
NR 101606
10-16
0.375
NR 050095
M5x.8
9.520
On-Sert®
Hole
Material Height
Height
Thick. (s)
(h)
Min (A)
Diameter
(d)
Material
Thick. (s)
0.125
0.220
0.284
0.015
0.213
0.157
0.230
0.354
0.017
0.628
0.629
0.230
0.354
0.017
0.162
0.164
0.160
0.230
0.422
0.018
5.525
6.350
4.700
5.840
10.720
0.430
Bold Italics: Metric
The dimensions of the above parts are for reference only. For complete design information please contact your
5
ARaymond Tinnerman Sales Professional.
Nuts
Self-Retaining Threaded Nuts
The product displayed in this catalog is a preferred sampling of the larger
product offering. For additional product refer to our website or contact a
sales professional.
EXPANSION NUTS
ARaymond Tinnerman Expansion Nuts provide fast, vibrationresistant attachments in blind or center-panel locations where
only one side is accessible. They snap easily into rectangular
holes and are self-retained by spring legs. Special locking tabs
are provided where permanent fastener retention is required.
As the screw is driven, the spring legs expand, locking them over
the panel, while also providing a double-locking action on the
screw (ultimately supplying the joint strength). These easy to
apply fasteners require no special skills or equipment to install,
and can be used in place of weld-, clinch-, or stake-type
fasteners. Applied before or after painting, they will not clog
and do not require masking.
Metal Expansion Nuts
ARaymond Tinnerman Metal Expansion Nuts are available in either
box or robotics style design options.
Box style expansion nuts are primarily used in sheet metal
applications. Once installed, these parts expand, reinforcing the
attachment and providing a low failure risk. The strength of the
part is greater than that of the panel, maximizing joint strength.
Tapered robotics expansion nuts can be used in plastic and metal
panels and are suited for automation. These parts are available
in key-hole, speed-nut and tapped barrel thread impressions.
The tapped barrel option provides the strongest attachment and
assists with assembly, making it beneficial in high volume
applications.
Plastic Expansion Nuts
ARaymond Tinnerman Plastic Expansion Nuts work well in
applications where metal to metal contact is not desired. The
insertion vs. retention ratio is not as high as their metal
counterparts. Completely enclosed in plastic, the screw threads
are protected from corrosion or galvanic action and all designs
can be incorporated with a seal.
• Universal
• Sheet metal to sheet metal attachments on appliances, HVAC,
industrial and automotive applications
• Great for attaching components and accessory equipment
Benefits
• Parts self-retain
• Easy to assemble - requires no special tools
• Provides a tight joint that is able to withstand vibrations
• Increases torque capability, improves quality and reduces rework
• Great for high volume applications and easy to automate
6
Metal expansion nuts featured on this page are manufactured with spring
and/or aesthetically pleasing finishes.
Plastic Expansion Nuts are manufactured in nylon.
Nuts
Expansion Nuts - Metal
Part Number
Screw Size Panel Thickness
Hole Width (B)
(F)
(SS)
D98621-8Z
8-18
D98928-M42141 M4.2x1.41
Hole
Length
(L)
Height
(h)
Design
Variation
1.000
0.700
8.750
8.550
8.650
7.350
3K
1.000
0.700
8.750
8.550
8.650
6.900
3K
3K
D98683-8Z
8-18
1.500
1.000
8.750
8.550
8.650
7.350
D98833-8Z
8-18
2.100
1.400
8.750
8.550
8.650
7.350
3K
2.150
0.700
8.750
8.550
8.650
6.900
3K
D99032-M42141 M4.2x1.41
D99049-M42141 M4.2x1.41
2.150
0.700
8.750
8.550
8.650
6.900
3KX
IPTS426401
M4.2x1.41
1.000
0.700
8.650
8.650
8.650
10.800
3D
IPTS428119
M4.2x1.41
1.900
1.600
8.950
8.650
8.800
10.800
3D
C08653-10A
10-12
0.056
0.036
0.508
0.503
0.505
0.345
3C
D99406-M4816
M4.8x1.59
2.300
0.700
13.100 12.900 13.000
7.800
3K
D99229-M48159 M4.8x1.59
2.100
0.660
12.250 11.750 12.000
7.900
3K
D99280-M42141 M4.2x1.41
2.150
0.700
8.750
8.550
10.750
6.900
3K
D98797-064M
M4.2x1.41
1.750
1.250
11.200 11.000
9.100
12.600
3E
D98912-064M
M4.2x1.41
2.800
2.300
11.200 11.000
9.100
12.300
3E
D99294-071M
M5x1.6
2.800
2.300
11.200 11.000
9.100
12.300
3E
D99152-064M
M4.2x1.41
2.500
2.100
10.200
8.100
12.400
3E
D98914-064M
10-16
0.840
0.660
12.100 11.900 12.000 13.600
3E
D99348-M42141 M4.2x1.41
1.250
0.750
11.400 11.100
9.250
12.700
5EF
D99287-M42141 M4.2x1.41
2.800
2.300
11.200 11.000
9.100
12.700
5EF
D99353-M42141 M4.2x1.41
2.800
2.300
10.200 10.000 10.000 11.900
5EF
5EP
8.000
D99042-M61
M6x1.0
2.500
2.000
15.000 14.800 14.900 14.000
D99249-M61
M6x1.0
2.000
0.700
14.030 13.750
9.390
10.700
5K
D99296-M61
M6x1.0
3.800
2.000
14.030 13.750
9.390
10.700
3E
D99038-M61
M6x1.0
1.500
0.700
20.000 19.800 12.650 10.500
5K
D98952-M61
M6x1.0
1.800
0.650
15.250 15.750 15.000
9.700
DESIGN VARIATIONS
3C
3D
3K
5EF
5KL
D99406-M4816 and D99348-M42141 availability may be limited.
5K
Expansion Nuts - Plastic
Part Number
(SS)
(F)
Hole Width (B)
Hole
Length
(L)
Height
(h)
C60053AA-031
#8; #10
0.076
0.020
0.281
0.250
0.266
0.471
C61374AA-250
#8; #10
0.076
0.020
0.281
0.250
0.266
0.690
C61408AA-125
#8; #10
0.076
0.020
0.281
0.250
0.266
0.565
7
Nuts
sales professional.
U-NUTS
ARaymond Tinnerman U-nuts self-retain in screw-receiving
position to provide simple, rapid attachment of mating panels.
They correct misalignment in panel mounting holes, do not turn
as the screw is driven and will not freeze on screw threads.
Most U-nuts are single piece stampings available in single
impression, 5-prong and threaded barrel styles. Nut retainers are
two-piece assemblies that combine the strength of a cold-headed
nut with the versatility of a sheet metal cage.
Speed Nut® - U-Shaped
Tapped Barrel
Nut Retainer
Align - Nut
Multiple impression and floating cage align-nuts can be used in
cases where there is excessive build variation.
• Universal - Can be used wherever a screw or bolt is used
• Used in place of clinch-nuts and weld-nuts
• Panel assembly applications in HVAC and white goods
Benefits
• Self-retain during assembly, improving assembly time and
reducing costly welding and clinching costs
• Easy to assemble, requiring no special tools
• Serviceable - Parts disassemble easily and reliably
• Single-component design eliminates small parts handling and
excessive part inventories
Performance Specifications
The strength of the joint greatly depends on the type of
impression and screw size.
For course thread screws, single impression and 5-prong styles are
a viable alternative. The strength of these parts correspond to
the strength of the screw. They are easier to install, have lower
profiles and make a cleaner joint.
For machine screws, threaded barrel parts are preferred. The
tapped barrel strength equals that of the screw.
For larger sizes, nut retainers are recommended. These parts
combine the strength of the nut with the flexibility of the spring
steel cage.
Selection Criteria
First, select the thread specification required for the desired
joint strength. Next, select a fastener designed for the required
panel thickness. Finally, select a nut that will accomodate the
distance from the edge of the panel to the center line of the
mounting hole.
U-SHAPED BOLT RETAINERS
In some applications it may be advantageous to pre-assemble the
bolt to the panel and drive a nut to secure the component. The
component can "hang" from the bolt, allowing both hands to be
free during the assembly operation.
8
stainless steel.
Nuts
Speed Nut® - U-Shaped
Part Number
(SS)
(F)
Throat
Distance
(A)
Hole
Diameter
(R)
Width
(b)
Length
(l)
Design
Variation
C06227-632
6-32
0.051
0.041
0.156
0.187
0.310
0.360
2AJ
C46551-011
6-32
0.023
0.018
0.187
0.187
0.312
0.370
3
2C
D11351-632
6-32
0.125
0.110
0.171
0.156
0.500
0.350
D08109-8
8-15;8-18
0.062
0.045
0.187
0.218
0.500
0.520
2D
C06077-8Z
8-18
0.070
0.060
0.234
0.250
0.500
0.520
2AD
D98448-8Z
8-15;8-18
0.110
0.091
0.220
0.220
0.423
0.417
3BCH
C71784-M42141 M4.2x1.41
3.000
2.000
6.000
7.000
D19640-8AB
8-18
D99228-M42141 M4.2x1.41
0.150
0.025
0.250
0.280
2.000
0.600
7.000
7.900
0.064
0.037
0.296
0.250
12.000 13.500
0.535
2DG
0.770
3AU
13.000 15.000
3DKU
D00885-8
8-15;8-18
US 420014
M4.2x1.41
3.000
2.250
7.200
US 420519
M4.2x1.41
3.800
0.650
8.640
C15127-8
8-15;8-18
0.198
0.168
0.281
0.218
D98712-064M
M4.2x1.41
3.100
2.200
10.000
8.000
D06377-8AB
8-15;8-18
0.150
0.070
0.312
0.328
D98665-071M
M4.2x1.41
1.270
1.000
12.700
7.920
D09031-8
8-15;8-18
0.125
0.102
0.406
0.281
0.625
0.700
2D
D01793-8
8-15;8-18
0.093
0.064
0.437
0.281
0.625
0.700
2D
D97295-028
8-18
0.150
0.025
0.480
0.280
0.340
0.970
3ACU
D19640-10AB
10-16
0.150
0.025
0.250
0.280
0.531
0.770
3AU
12.700 14.100
3JZ
0.437
0.630
5.800
9.300
12.900
3SZ
6.980
13.600 19.300
3SZ
0.406
0.610
14.500 17.600
0.430
0.750
14.980 20.950
2D
2J
3D
2DU
4J
2.660
2.460
6.800
7.000
D09031-10
10-16
0.125
0.102
0.406
0.281
0.625
0.700
2D
C01880-10Z
10-16
0.187
0.156
0.750
0.281
0.437
1.140
2
C01197-1024
10-24
0.120
0.109
0.281
0.312
0.437
0.630
2F
C08048-1024
10-24
0.062
0.045
0.515
0.250
0.375
0.970
2J
C01880-1024
10-24
0.187
0.156
0.750
0.281
0.437
1.140
2
D13398-1032
10-32
0.062
0.045
0.250
0.250
0.625
0.570
2D
D00521-1420
1/4-20
0.109
0.051
0.312
0.359
0.500
0.780
2
C14969-1420
1/4-20
0.109
0.051
0.312
0.343
0.500
0.790
2F
C14860-1420
1/4-20
0.125
0.064
0.500
0.343
0.500
0.970
2G
D09569-1420
1/4-20
0.156
0.060
0.937
0.343
0.625
1.240
2E
D17453-1420
1/4-20
0.190
0.156
0.906
0.343
0.625
1.225
2E
C71743-M47159 M4.8x1.59
DESIGN VARIATIONS
(A)
STRAIGHT
UPPER LEG
(J) "J" NUT
(B) CORNER
TURNED UP
(H) BARBS
ON LOWER
LEGS
(C) NO
RETAINER
ON LOWER
LEG
(D)
RELIEF
NOTCH
(E)
CORNERS
CUT OFF
(F) FULL
EXTRUSION
ON LOWER
LEG
(G) BARB
ON TOP
LEG
(U) "U" NUT
9
stainless steel.
Nuts
U-Nut - 5-Prong (Prevailing Torque)
Panel Thickness
(F)
Throat
Distance
(A)
Hole
Part
Diameter
Width (b)
(R)
Part
Length
(l)
Part Number
Screw Size
D98316-071M
M4.2x1.41
1.800
0.500
7.920
8.330
13.780 19.500
D98317-071M
M4.2x1.41
3.800
1.800
7.900
8.300
13.780 19.500
14.000 18.500
D98860-071M
M4.2x1.41
2.900
2.400
8.000
6.750
D98585-071M
M4.2x1.41
2.900
2.400
8.000
6.750
14.000 18.500
C71667-M42141
M4.2x1.41
4.000
1.800
8.700
8.000
13.600 18.400
D99174-071M
M4.2x1.41
1.200
0.800
14.000
8.330
13.770 25.200
D98434-071M
M4.2x1.41
3.800
1.800
14.000
8.330
13.770 25.200
U-Nut - Tapped Barrel
Part Number
Screw Size
Panel Thickness
(F)
D99390-M42141 M4.2x1.41
3.000
2.000
D99389-M42141 M4.2x1.41
Throat
Distance
(A)
Hole
Part
Diameter
Width (b)
(R)
Part
Length
(l)
Torque
8.600
7.930
12.500 16.900
6
2.000
0.500
9.100
7.930
12.500 17.300
6
LPGS420018
M4.2x1.41
3.800
0.650
14.000
7.550
12.500 22.000
6
LUGS832006
8-32
0.079
0.020
0.383
0.280
0.492
0.681
5
LUGZ103239
10-32
0.100
0.070
0.270
0.260
0.510
0.600
5
LUGS142059
1/4-20
0.150
0.025
0.450
0.390
0.560
0.920
5
LUGS561863
5/16-18
0.150
0.025
0.500
0.437
0.670
0.980
5
LUGS381683
3/8-16
0.200
0.050
0.660
0.562
0.930
1.290
5
LUGS060023
M6x1.0
4.000
0.800
12.000 10.300 14.220 23.370
5
LPGS060023
M6x1.0
4.000
0.800
12.000 10.300 14.220 23.370
6
LUGZ002112
M6x1.0
3.810
0.800
12.000 10.300 14.220 23.370
5
6
LPGZ002112
M6x1.0
3.810
0.800
12.000 10.300 14.220 23.370
LUGZ002241
M6x1.0
3.810
0.800
12.000 10.300 14.220 23.370
5
LPGZ002241
M6x1.0
3.810
0.800
12.000 10.300 14.220 23.370
6
LUGS061512
M6x1.0
4.000
0.800
12.500
15.000 24.000
5
LUGS060030
M6x1.0
2.500
1.000
19.750 10.300 14.500 29.500
5
LUGS080025
M8x1.25
4.000
0.800
13.000 11.700 17.020 24.890
5
LPGS080025
M8x1.25
4.000
0.800
13.000 11.700 17.020 24.890
6
LPGZ080025
M8x1.25
4.000
0.800
13.000 11.700 17.020 24.890
6
LUGS085725
M8x1.25
5.500
1.500
13.000 11.700 17.020 24.890
5
LPGS085725
M8x1.25
5.500
1.500
13.000 11.700 17.020 24.890
6
LUGS080031
M8x1.25
5.500
1.500
20.000 11.700 17.000 31.500
5
7.930
LPGS080031
M8x1.25
5.500
1.500
20.000 11.700 17.000 31.500
6
LUGS100033
M10x1.5
5.500
1.500
17.500 15.000 17.500 32.500
5
LPGS100033
M10x1.5
5.500
1.500
17.000 12.000 24.000 33.500
6
5: Free Spin Barrel
6: Prevailing Torque Barrel
10
Nuts
Self-Retaining Threaded Nuts / Bolts
Most of the products featured on this page are manufactured with spring or
pre-hardened steel. Nut and bolt components are available in different
grades. ARaymond Tinnerman offers these parts in corrosion protection
U-Nut Retainer
Panel Thickness
(F)
Throat
Distance
(A)
Hole
Part
Diameter
Width (b)
(R)
Part
Length
(l)
Part Number
Screw Size
C33962SS-1024
10-24
3.180
2.920
9.520
7.620
C30110-1024
10-24
0.135
0.093
0.375
0.437
C33892-1024
10-24
2.360
0.810
C33945-1032
10-32
0.075
0.050
C33892-1032
10-32
2.360
0.810
C33945-1420
1/4-20
0.075
0.050
0.375
0.343
0.687
0.710 U-TYPE
C30110-1420
1/4-20
0.135
0.093
0.375
0.437
0.560
0.730
C33896-1420
1/4-20
3.560
2.290
12.700 12.800 19.050 26.290 J-TYPE
C33892-1420
1/4-20
2.360
0.810
12.700 10.000 15.870 24.010 J-TYPE
C33924-1420
1/4-20
2.360
0.810
19.840 10.000 15.870 30.880 J-TYPE
C33952-5618
5/16-18
2.290
1.270
13.870 12.800 19.050 26.670 J-TYPE
C33896-5618
5/16-18
3.560
2.290
12.700 12.800 19.050 26.290 J-TYPE
C33883-5618
5/16-18
3.430
3.180
11.430 12.700 14.730 23.850 J-TYPE
C33953-5618
5/16-18
4.140
3.230
12.700 11.100 19.050 25.400 J-TYPE
C33952-3816
3/8-16
0.090
0.050
C33896-3816
3/8-16
3.560
2.290
12.700 12.800 19.050 26.290 J-TYPE
C33896-M61
M6x1.0
3.560
2.290
12.700 12.800 19.050 26.290 J-TYPE
D31758-1032
10-32
0.070
0.060
Type
17.450 18.040 U-TYPE
0.560
0.730
J-TYPE
12.700 10.000 15.870 24.010 J-TYPE
0.375
0.343
0.687
0.710 U-TYPE
12.700 10.000 15.870 24.010 J-TYPE
0.546
0.272
0.504
0.281
0.750
0.500
J-TYPE
U - Type
26.670 J-TYPE
0.570 U-TYPE
J - Type
Align Nuts
U-Shaped Bolt Retainers
Bob to investigate
Part Number
Screw Size
(F) Panel
Thickness
(A) Throat
(max)
Part Number
Screw Size
(F) Panel
Thickness
(A) Throat
D98612-8Z
M4.2x1.41
1.8 / 2
7.00
C34030-1420
1/4‐20
0.098 / 0.118
0.69
11
Nuts
sales professional.
SPEED GRIP CAGE NUTS
ARaymond Tinnerman Cage Nuts combine the benefits of a spring
steel fastener with the high-strength of a multi-threaded nut.
They snap readily into bolt receiving position at center panel
locations and retain themselves in place.
Installation does not require special tools or skills, eliminating the
need for special operations. Cage nuts can be applied at any
convenient spot along the assembly line. The nut floats within the
cage to account for normal build variation. Speed Grip Cage Nuts
are ideal for blind location assembly.
• Serviceable access panels for HVAC and Appliances
• Cabinet construction for various industries
Benefits
• Self-retaining feature provides easy install
• Stong joint that is able to withstand vibrations
• Easy to assemble, requiring no special tools
• Can be applied at any convenient spot along the assembly line
Speed Grip Nut Retainer
Parts install under 20 lbs. and meet proof load for nut
specification.
CUSTOMIZED NUT ASSEMBLIES
ARaymond Tinnerman can manufacture nut assemblies to suit
custom applications. Contact a sales professional for a
customized solution.
SPEED GRIP BOLT RETAINERS
In some applications it may be advantageous to pre-assemble the
bolt to the panel and drive a nut to secure the component. The
component can "hang" from the bolt, allowing both hands to be
free during the assembly operation. Speed Grip Bolt Retainers
use the same cages as Speed Grip Nut Retainer.
Speed Grip Bolt Retainer
12
Most of the products featured on this page are manufactured with spring or
pre-hardened steel. Nut and bolt components are available in different
grades. ARaymond Tinnerman offers these parts in corrosion protection
Nuts
Speed Grip Cage Nuts
Panel Thickness
Hole Width (B)
(F)
Part
Hole
Material
Part
Length
Length
Thick. (s)
Width (b)
(l)
(L)
Part Number
Screw Size
D33751-832
8-32
0.063
0.025
0.286
0.281
0.200
0.430
0.450
0.017
D30395-832
8-32
0.063
0.025
0.286
0.281
0.281
0.430
0.450
0.017
D30395-1024
10-24
0.063
0.025
0.286
0.281
0.281
0.430
0.450
0.017
D07931-832
8-32
0.063
0.025
0.380
0.342
0.377
0.490
0.520
0.020
D07931-1032
10-32
0.063
0.025
0.380
0.342
0.377
0.490
0.520
0.020
D07931-1024
10-24
0.063
0.025
0.380
0.342
0.377
0.490
0.520
0.020
D07988-1420
1/4-20
0.063
0.025
0.380
0.342
0.377
0.490
0.520
0.020
D07941-832
8-32
0.105
0.064
0.380
0.342
0.377
0.490
0.520
0.020
D07941-1024
10-24
0.105
0.064
0.380
0.342
0.377
0.490
0.520
0.020
D07941-1032
10-32
0.105
0.064
0.380
0.342
0.377
0.490
0.520
0.020
0.490
D98579-1032
10-32
0.105
0.064
0.380
0.342
0.377
0.520
0.020
D07998-M61
M6x1.0
2.670
1.620
9.650
8.710
9.600
12.450 13.210
0.510
D98580-M61
M6x1.0
2.670
1.620
9.650
8.710
9.580
12.440 13.210
0.510
D07998-1420
1/4-20
0.105
0.064
0.380
0.342
0.377
0.490
0.520
0.020
D98580-1420
1/4-20
0.105
0.064
0.380
0.342
0.377
0.490
0.520
0.020
0.490
0.520
0.020
12.450 13.200
0.510
D07951-1024
10-24
0.126
0.093
0.380
0.342
0.377
D07956-M61
M6x1.0
3.200
2.360
9.650
8.710
9.600
D07956-1420
1/4-20
0.126
0.093
0.380
0.342
0.377
0.490
0.520
0.020
D31365-1024
10-24
0.156
0.125
0.380
0.342
0.377
0.490
0.520
0.020
D31365-1420
1/4-20
0.156
0.125
0.380
0.342
0.377
0.490
0.520
0.020
D98581-1420
1/4-20
0.156
0.125
0.380
0.342
0.377
0.490
0.520
0.020
D33880-1420
1/4-20
0.192
0.172
0.380
0.342
0.377
0.490
0.520
0.020
D07953-5618
5/16-18
0.092
0.057
0.508
0.460
0.462
0.645
0.660
0.025
D07953-3816
3/8-16
0.092
0.057
0.508
0.460
0.462
0.645
0.660
0.025
D07957-5618
5/16-18
0.126
0.093
0.508
0.460
0.505
0.640
0.660
0.025
D07957-3816
3/8-16
0.126
0.093
0.508
0.460
0.505
0.640
0.660
0.025
D31910-5618
5/16-18
0.197
0.177
0.508
0.460
0.505
0.640
0.660
0.025
D31910-M8125
M8x1.25
5.000
4.500
12.900 11.680 12.840 16.260 16.760
0.640
D07968-1213
1/2-13
0.092
0.059
0.610
0.573
0.590
0.860
0.870
0.025
D07969-3816
3/8-16
0.126
0.093
0.610
0.573
0.590
0.860
0.870
0.025
D30683-3816
3/8-16
0.210
0.162
0.610
0.573
0.600
0.860
0.870
0.025
D30683-7614
7/16-14
0.210
0.162
0.610
0.573
0.600
0.860
0.870
0.025
D30096-3816
3/8-16
0.260
0.240
0.610
0.573
0.590
0.860
0.870
0.025
13
Palnuts®
Self-Locking Stamped Nuts
PALNUT® THREADED STAMPED NUTS
ARaymond Tinnerman Threaded Stamped Nuts are used in
place of traditional hex-nuts for reduced weight or
applications requiring lower torques. Parts are available in
common screw sizes. The hex-shaped stamped nuts can be
used in applications where screw length is restricted. They
can also be used with a standard hex-nut to act as a jam nut.
Washer style nuts feature a stamped, integral washer. This
allows the part to accomodate a larger hole without the use of
a separate loose washer. Sealants can be applied to the
washer to reduce moisture and noise intrusion.
Lock-Nut - Hex
Part Number
Screw Size
Drive
(B)
Part
Height
(h)
Material
Thick. (s)
RM 632004
6-32
1/4"
0.080
0.012
RF 142000
1/4-20
7/16"
0.123
0.020
RF 516180
5/16-18
1/2"
0.134
0.020
RF 381600
3/8-16
9/16"
0.145
0.020
RL 716200
7/16-20
5/8"
0.150
0.020
RE 716280
7/16-28
5/8"
0.111
0.014
RF 121300
1/2-13
3/4"
0.179
0.026
RF 122000
1/2-20
3/4"
0.172
0.023
RF 916180
9/16-18
7/8"
0.193
0.023
RR 581100
5/8-11
1"
0.224
0.034
RF 341000
3/4-10
1 1/8"
0.246
0.038
RH 180000
1-8
1 5/8"
0.336
0.049
RF 060011
M6x1.0
11mm
3.050
0.460
Lock-Nut - Washer
Part Number
Screw Size
Drive
(B)
Diameter
(d)
Part
Height
(h)
Material Design
Thick. (s) Variation
DZ 002191
6-18;6-20
11/32"
0.469
0.212
0.014
B
DO 632007
6-32
5/16"
0.437
0.204
0.014
C
DO 832075
8-32
11/32"
0.469
0.212
0.014
C
DO 832010
8-32
11/32"
0.625
0.234
0.015
C
DO 102408
10-24
3/8"
0.500
0.231
0.017
C
DO 102412
10-24
3/8"
0.750
0.269
0.017
C
DO 142095
1/4-20
7/16"
0.594
0.261
0.020
C
DO 142013
1/4-20
7/16"
0.812
0.292
0.020
C
DO 040012
M4x.7
9mm
12.000
5.650
0.360
C
DO 050014
M5x.8
10mm 14.000
5.790
0.380
C
DZ 002171
M6x1.0
11mm 21.000
6.860
0.460
D
DO 060024
M6x1.0
11mm 24.000
7.750
0.460
C
DFOW060024
M6x1.0
11mm 24.000
7.750
0.460
E
DO 051614
M5x1.6
10mm 14.000
6.400
0.460
C
DO 051619
M5x1.6
10mm 18.880
7.350
0.430
C
DZ 051612
M5x1.6
11mm 21.000
6.850
0.460
D
(B) WASHER FLAT
(C) WASHER
CONCAVE DOWN
(D) WASHER DISHED
(E) WASHER
PETAL PROFILE
14
Palnuts®
Self-Locking Stamped Nuts
SELF-THREADING STAMPED NUTS
ARaymond Tinnerman Self-Threading Stamped Nuts have the
same features as threaded stamped nuts, but form their own
thread on a smooth die cast, mild steel, or plastic stud. The
interference caused by the nut and stud creates a strong
locking force that prevents disassembly.
The hex-shape has the impression nearer to the base of the
part. This can assist when stud height and assembly space is
limited.
The washer type can accomodate a larger mating hole to
compensate for component build variation. A seal can be
added to the washer type nut to prevent noise and water
intrusion.
Self-Threading - Hex
Part Number
Stud Size
Drive
(B)
Part
Height
(h)
Material
Thick. (s)
SR 094005
3/32"
5/16"
0.100
0.017
SR 030008
3mm
8mm
2.650
0.410
0.014
SR 125004
1/8"
1/4"
0.088
SR 156000
5/32-4mm
11/32"
0.110
0.016
SR 188006
3/16"
3/8"
0.116
0.019
SR 050010
5mm
10mm
2.750
0.480
SP 219000
7/32"
7/16"
0.118
0.015
SR 060013
6mm
13mm
3.400
0.640
SR 250000
1/4"
1/2"
0.140
0.025
SR 630013
1/4"
13mm
3.400
0.640
SR 375011
3/8"
11/16"
0.166
0.026
Self-Threading - Washer
Part Number
Stud Size
Drive
(B)
Diameter
(d)
Part
Height
(h)
SD 125007
1/8"
5/16"
0.437
0.186
0.017
SD 156007
5/32-4mm
11/32"
0.450
0.202
0.018
C
SD 188008
3/16"
3/8"
0.500
0.217
0.017
C
3/8"
Material Design
C
SZ 001966
3/16"
0.750
0.153
0.018
K
SZ 002003
5mm
10mm 14.820
5.030
0.510
G
SD 050015
5mm
10mm 15.000
5.400
0.430
C
SK 050021
5mm
10mm 21.000
6.840
0.480
C
SF 060015
6mm
11mm 15.000
6.350
0.530
E
SF 060018
6mm
11mm 18.000
7.180
0.530
E
(C) WASHER CONCAVE
(E) WASHER PETAL
SD 250095
1/4"
7/16"
0.594
0.247
0.021
C
DOWN
PROFILE
SF 630018
1/4"
3/8"
18.000
7.060
0.530
E
SF 312014
5/16"-8mm
1/2"
0.875
0.309
0.023
E
SF 080020
5/16"-8mm 13mm 20.000
7.850
0.580
E
SP 330012
11/32"
9/16"
0.750
0.290
0.022
G
SP 330016
11/32"
1/2"
25.400
7.980
0.580
G
(G) WASHER W/
(K) INTERNAL
SERRATION
HEX DRIVE
15
Palnuts®
Self-Locking Smooth Stud Fasteners
sales professional.
PUSH-ONS
ARaymond Tinnerman Palnut® Push-On fasteners provide a good
balance between maximum holding strength and reasonable pushon force. They feature inner teeth that slide over and bite into a
round stud, preventing two panels from disengaging. Push-Ons
are applied much faster than standard hex-nuts.
PS and PV style push-ons are the most commonly used. The
serrated teeth provide flexibility, allowing them to accommodate
larger stud variations. The separation of the teeth add flexibility
and reduce insertion efforts.
Palnut® (PS)
Palnut® (PV)
Thinwall (PG)
Rectangular Push-On
Palnut® - Insert (PN)
Palnut® Bolt Retainer (PT)
Thin wall fasteners are higher strength versions of the push-on
family. The interior design is much more rigid, making them
suited for higher retention applications.
Rectangular removeable push-ons offer a different exterior
footprint, and can be removed on a D-shaped stud by twisting the
part 90 degrees.
Inserts provide a larger bearing surface so parts can be installed
with automated assembly or can be pre-assembled to trim pieces.
Palnut® Threaded Push-On Fasteners can also be used in
assembly applications where screws or bolts need to be retained
in place before a nut is positioned and tightened.
• Domestic Appliances
• Toys, lawn carts, and coolers with axles
• Small mechanical or electrical devices
Benefits
• Provides maximum holding power, eliminating warranty issues
caused by vibration loosening
• No tools required - eliminating time-consuming assembly
operations
• One-piece design eliminates the need for multiple small parts,
reducing inventory space
• Low profile design, allowing parts to be used in small
mechanical and electrical devices
Insertion and retention efforts are dependent on the material and
material thickness of the part, the size of the spring fingers and
the material of the stud. Retention capability is typically up to
three times that of insertion efforts.
ARaymond Tinnerman will offer samples for testing or will
perform testing on customer provided components.
16
Palnuts®
steel. Some are manufactured in stainless steel for higher corrosion and a
more aesthetically pleasing finish.
Push-On (PS)
Stud Diameter
(Max/Min) (SD)
Part
Material
Diameter
Thick. (s)
(d)
# of
Prongs
Part Number
Stud Size
PS 062032
1/16"
0.065
0.060
0.195
0.010
6
PS 094032
3/32"
0.097
0.091
0.195
0.010
6
PS 125306
1/8"
0.128
0.122
0.375
0.009
6
PS 125006
1/8"
0.128
0.122
0.375
0.014
6
PD 156307
5/32-4mm
0.158
0.153
0.437
0.010
8
PD 156007
5/32-4mm
0.158
0.153
0.437
0.014
8
PS 188307
3/16"
0.191
0.185
0.437
0.010
8
PS 188007
3/16"
0.191
0.185
0.437
0.014
8
PS 050311
5mm
5.050
4.920
11.100
0.250
8
PS 050011
5mm
5.050
4.920
11.100
0.360
8
PD 219385
7/32"
0.222
0.216
0.531
0.012
8
PD 219085
7/32"
0.222
0.216
0.531
0.016
8
PS 060313
6mm
6.050
5.920
13.500
0.250
8
PS 060013
6mm
6.050
5.920
13.500
0.410
8
PS 250385
1/4"
0.253
0.247
0.531
0.012
8
PS 250075
1/4"
0.253
0.247
0.531
0.016
8
PS 312310
5/16"-8mm
0.316
0.310
0.625
0.015
8
PS 312010
5/16"-8mm
0.316
0.310
0.625
0.020
8
PS 375312
3/8"
0.378
0.372
0.750
0.017
8
PS 375012
3/8"
0.378
0.372
0.750
0.026
8
PS 100319
10mm
10.050
9.920
19.000
0.380
8
PS 100019
10mm
10.050
9.920
19.000
0.680
8
PS 438014
7/16"
0.441
0.436
0.875
0.030
8
PS 120022
12mm
12.050 11.920 22.100
0.860
8
PS 500016
1/2"
0.503
0.497
1.000
0.035
8
PZ 002015
5/8"
0.628
0.622
1.000
0.016
8
Push-On (PV)
Stud Diameter
(Max/Min) (SD)
Diameter Material
(d)
Thick. (s)
5mm
5.050
4.920
23.800
0.380
6mm
6.050
5.920
23.800
0.380
PV 250015
1/4"
0.253
0.247
0.937
0.015
PV 312015
5/16"-8mm
0.316
0.310
0.937
0.015
PV 880018
11/32"
8.850
8.720
18.000
0.500
PV 375015
3/8"
0.378
0.372
0.937
0.015
PV 438015
7/16"
0.441
0.435
0.937
0.015
PV 500015
1/2"
0.503
0.497
0.937
0.015
Part Number
Stud Size
PV 050024
PZ 002011
17
Palnuts®
Push-On Thinwalls (Grooveless Retaining Rings – PG)
Part Number
Stud Diameter Stud Diameter
(SD)
(Max/Min) (SD)
Part
Material
Diameter
Thick. (s)
(d)
Part Number
Stud Diameter Stud Diameter
(SD)
(Max/Min) (SD)
0.498
T99220SS-128
1/16"
0.065
0.059
0.150
0.006
T99220-193
.245"
T99220SS-93
2mm
0.081
0.075
0.178
0.006
T99220SS-258
1/2"
0.750
0.010
12.600 12.600 19.050
0.560
T99220SS-60
3/32"
0.096
0.090
0.218
0.008
T99220SS-120
1/2"
0.750
0.010
T99220SS-83
3mm
0.120
0.114
0.245
0.010
T99220-200
14mm
14.020 13.980 21.900
1.060
T99220SS-167
1/8"
0.128
0.122
0.194
0.012
T99220-223
15mm
15.050 14.920 23.050
0.510
T99220SS-96
1/8"
0.128
0.122
0.245
0.008
T99220SS-100
5/8"
15.900 15.770 19.050
0.380
T99220SS-74
1/8"
0.128
0.122
0.325
0.006
136447
17mm
0.503
0.672
0.492
Part
Material
Diameter
Thick. (s)
(d)
0.497
0.666
1.000
0.034
1.120
T99220SS-77
0.130"
0.133
0.127
0.245
0.006
PG 189032
19mm
19.050 18.800 31.800
T99220SS-153
0.143"
0.146
0.140
0.260
0.008
PG 190025
3/4"
19.100 19.000 25.400
0.640
T99220SS-66
5/32"-4mm
0.159
0.153
0.260
0.008
225547
20mm
20.000 19.930 27.990
1.000
T99220-162
4mm
0.165
0.159
0.437
0.014
136446
25mm
0.987
0.981
1.438
0.040
T99220SS-68
3/16"
0.191
0.185
0.312
0.006
T99220-208
1"
1.003
0.997
1.750
0.014
T99220SS-126
3/16"
0.191
0.185
0.375
0.012
T99220SS-196
6mm
0.239
0.234
0.531
0.017
PG 237043
6mm
0.243
0.237
0.625
0.022
T99220SS-80
1/4"
0.253
0.247
0.312
0.006
T99220SS-259
1/4"
0.253
0.247
0.437
0.020
T99220-119
1/4"
0.253
0.247
0.625
0.022
T99220SS-137
1/4"
0.253
0.247
0.625
0.010
T99220-171
1/4"
0.253
0.247
0.750
0.025
T99220SS-118
.300"
0.303
0.297
0.500
0.020
T99220SS-64
5/16"
0.316
0.310
0.437
0.010
T99220SS-261
5/16"-8mm
7.990
7.950
12.600
0.510
T99220-112
5/16"
0.316
0.310
0.625
0.022
T99220SS-132
11/32"
0.346
0.337
0.562
0.010
T99220SS-173
3/8"
0.375
0.369
0.500
0.020
T99220SS-91
3/8"
0.378
0.372
0.625
0.010
T99220SS-122
11mm
0.433
0.427
0.625
0.010
0.439
0.434
0.575
0.010
12.050 11.980 19.900
1.060
T99220SS-172
7/16"
T99220-201
12mm
Push-On (Rectangular - Removable)
Part Number
Stud Diameter Alt. Stud
(D1)
Dia. (D)
Part
Material
Part
Length
Width (b) Thick. (s)
(l)
C12002-012
3/32"
0.074
0.450
0.230
0.012
D12003-012
1/8"
0.100
0.580
0.310
0.012
D12004-017
5/32-4mm
0.125
0.560
0.380
0.017
C12005-017
3/16"
0.150
0.630
0.380
0.017
C12007-017
1/4"
0.200
0.620
0.440
0.017
C12008-020
5/16"-8mm
0.250
0.690
0.500
0.020
18
Palnuts®
Self-Locking Fasteners
Push-On Inserts (PN)
Part
Part Number
Stud Diameter Diameter
(d)
Part
Height
(h)
Material Design
C70578-010
1/16"
0.312
0.026
0.010
D4
PN 125007
1/8"
0.433
0.625
0.010
D4
C13790-012
5/32"
0.375
0.040
0.012
D4
C10592-012
3/16"
0.470
0.030
0.012
C
3/16"
0.562
0.070
0.012
F3
PN 050011
207300
5mm
11.000
1.590
0.250
D4
PN 060011
6mm
11.000
1.590
0.430
F4
207500
1/4"
0.562
0.700
0.012
F4
206600
1/4"
0.726
0.085
0.017
F4
206700
5/16"
0.726
0.085
0.017
F6
3/8"
0.625
0.056
0.015
F8
3/8"
0.726
0.085
0.015
F6
PR 375010
206300
207600
3/8"
1.145
0.110
0.017
F6
206800
9mm
18.520
2.160
0.430
F6
206900
7/16"
0.726
0.085
0.017
F6
207900
7/16"
1.145
0.110
0.017
F6
207700
1/2"
1.145
0.110
0.017
F6
207800
5/8"
1.145
0.110
0.017
F6
212900
3/4"
1.145
0.110
0.017
F6
22mm
35.500
0.625
0.500
F8
PN 220036
(D4) 4
PRONGSHEARED
(C) SIDE
PRONGS
3 PRONGSLOTTED
(F4) 4
PRONGSLOTTED
(F6) 6
PRONGSLOTTED
(F8) 8
PRONGSLOTTED
Push-On Bolt Retainers (PT)
Part Number
Screw Size
Part
Diameter
(d)
Part
Height
(h)
PT 138055
6-18;6-20
0.344
0.001
0.010
RT4
Material Design
PT 164006
8-15;8-18
0.375
0.049
0.010
RT4
PT 190007
10-12;10-16
0.437
0.001
0.012
RT4
PT 250008
1/4-20
0.500
0.001
0.010
RT5
PT 312010
5/16-18
0.625
0.001
0.014
RT5
PT 375125
3/8-16
0.783
0.001
0.015
RT6
PT 438135
7/16-20
0.843
0.001
0.015
RT6
PT 500015
1/2-20
0.938
0.001
0.015
RT6
PT 040010
M4x.7
9.520
0.001
0.250
RT4
PT 050011
M5x.8
11.100
0.001
0.300
RT5
PT 060013
M6x1.0
12.700
2.180
0.250
RT5
PT 060017
M6x1.0
17.000
0.001
0.250
RT5
PT 080016
M8x1.25
15.900
0.001
0.360
RT5
PZ 002185
M8x1.25
23.800
2.580
0.330
MT6
PT 100020
M10x1.5
19.870
0.001
0.380
RT6
PT 120021
M12x1.75
21.410
0.001
0.380
RT6
PT 140025
M14x2.0
25.000
0.001
0.380
RT6
(R) Flat
(M) Dished
19
Palnuts®
Self-Locking Stud Decorative - Special
sales professional.
TWO-PIECE DECORATIVE CAPS
ARaymond Tinnerman's decorative two piece push-on fasteners
combine the reliability of high carbon spring steel with an
aesthetically appealing cap to hide unattractive stud ends.
Used over shaft, stud, or rod ends for a multitude of applications,
the colorful plastic push-on caps will enhance any product while
providing dependable, vibration resistant assembly.
Caps are made out of Phthalate and lead-free materials and are
RoHS compliant. Available in standard colors of red, white, and
black, custom colors are also available with a modest upcharge.
The parts are durable to withstand impact forces necessary for
assembly and the retention of the cap to the metal insert is very
strong.
ONE-PIECE DECORATIVE HIGH-HAT (PW)
Used over shaft, stud or rod ends for a multitude of applications,
the shiny high-hats will enhance any product while providing
dependable, vibration resistant assembly.
• Miscellaneous household items that feature axles such as toys
and garbage can wheels
• Nameplates and any other injection molded parts that feature
injection molded studs
Insertion and retention to stud is dependant on stud size and
material. ARaymond Tinnerman will offer samples for testing or
will perform testing on customer provided components.
PARTS FOR GROOVED SHAFTS
ARaymond's grooved shaft parts provide an excellent way to
assemble panels to grooved shafts. The lower leg is tapered,
pulling the parts together while protecting the mating surface.
The upper leg snaps behind the shaft to act as a redundant and
serviceable stop.
BALL STUD SPEED CLIPS
Ball stud speed clips are used on doors and other serviceable
panels. Wear and tear on bosses and panels are eliminated
because there is no direct contact. When latched, the spring legs
of the clip continually bear inward on the stud, holding the
latched unit snug against the panel.
20
more aesthetically pleasing finish. The plastic caps are available in black,
red, or white and can be customized to meet a specific app.
Palnuts®
Self-Locking Stud Decorative - Special
Push-On Capped (KPS) **Refreshed Line**
Stud
Diameter
Part
Diameter
(d)
Part
Height
(h)
Material
Thick. (s)
Small Cap
1/8"
0.656
0.344
0.012
0.250
0.150
3
Small Cap
5/32"
0.656
0.344
0.012
0.250
0.150
3
KPS 188105
Small Cap
3/16"
0.656
0.344
0.012
0.250
0.150
3
KPS 250105
Small Cap
1/4"
0.656
0.344
0.012
0.250
0.150
4
KPS 250135
Medium Cap
1/4"
0.835
0.440
0.015
0.350
0.175
4
KPS 312135
Medium Cap 5/16"
0.835
0.440
0.015
0.350
0.175
6
KPS 375135
Medium Cap
3/8"
0.835
0.440
0.015
0.350
0.175
6
KPS 009215
Medium Cap 9mm
21.200 11.200
KPS 438135
Medium Cap 7/16"
Part Number
Description
KPS 125105
KPS 156105
Shaft Height
(Max/Min)
# of
Prongs
0.380
8.900
4.400
6
0.835
0.440
0.015
0.350
0.175
6
1.300
0.645
0.017
0.525
0.200
6
KPS 375210
Large Cap
3/8"
KPS 438210
Large Cap
7/16"
1.300
0.645
0.017
0.525
0.200
6
KPS 500210
Large Cap
1/2"
1.300
0.645
0.017
0.525
0.200
6
0.645
0.017
0.525
0.200
6
0.645
0.017
0.525
0.200
6
KPS 625210
Large Cap
5/8"
1.300
KPS 750210
Large Cap
3/4"
1.300
One Piece Decorative High Hat - **New**
Available in 4th quarter 2013.
Special Stud Receivers - Grooved Shaft
Part Number
054633
C57843-071M
(SD) Stud
Diameter
(D) Groove
Diameter
6mm - 1/4"
4.9 / 5.1
8mm - 5/16" 5.76 / 5.92
Ball Stud Receivers - Spring Catches
(A) Groove
Height
Part Number
Pull Out
Force
Mounting
Hole Dia (d)
Material
Thick. (s)
1.30
C01663-017
8.0/9.0 lbs
0.135
0.017
1.98
C04893-012
3.5/5.0 lbs
0.105
0.012
21
Panel Clips / Trim Clips
Snap Fit Design
sales professional.
TRIM CLIPS
ARaymond Tinnerman's Trim Clip fasteners are designed for use
over rectangular studs or integrally molded blades, ribs, etc. on
trim strips, access plates, or any light application where
removability is a factor.
Trim clips are simply snapped into a specified hole in the
substrate making installation and removal easy. The selfequalizing retaining legs are formed into a dart-type
configuration for easy mounting and assure a snug, rattle-free
installation, yet will yield to deliberate removal force applied to
the trim or plate.
Standard
High Strength
Single-Sided
Dart Style - Square
Standard trim clips are most widely used. They can be used to
allow panels to withstand disassembly with light to moderate
loads.
High strength trim clips are used in similar panel orientations as
standard trim clips, but used when panels are subjected to
stronger or cyclical loading.
Single-sided trim clips are usually used in tandem with other
single sided trim clips to engage an edge of a cavity.
Dart style clips are used in applications where the substrate is
some distance from the mating panel, in many cases these are
used to allow a wire path between the two panels.
Dart Style - Round
Right angle trim clips can be used to attach two parallel sheet
metal surfaces.
Tubular style trim clips could be easily categorized as a stud
receiver. This part snaps into the substrate, hole first, then
accepts a stud.
• Trim applications
• Close-out applications
• Vending
• ATM
• Specialty furniture applications
Benefits
• Parts are hidden - Provides for unblemished exposed panel
surfaces
• Removeable, reusable
• Easy install - Snap together in seconds
• No tools required
Note: Excessive removal can cause some degradation to mating
panels
Insertion and retention performance is dependent on component
attributes and material. ARaymond Tinnerman will offer samples
for testing or will perform testing on customer provided
components.
22
Tubular
Right Angle
stainless steel.
Snap Fit Design
Tubular Clips
Part Number
Stud Diameter Panel Thickness
(SD)
(F)
Hole Diameter
Max/Min (R)
Height Material
Thick. (s)
(h)
Stud
Engaging
Feature
D04483-032
3/32"
0.040
0.032
0.120
0.120
0.170
0.010
Standard
C02374SS-012
1/8"
0.066
0.060
0.161
0.161
0.250
0.012
Standard
C03810-012
1/8"
0.095
0.089
0.162
0.162
0.220
0.012
Standard
C02198-032
3/16"
0.036
0.030
0.228
0.228
0.450
0.012
Standard
D02822-064
3/16"
0.068
0.062
0.228
0.228
0.450
0.012
Standard
C02201-081
3/16"
0.081
0.079
0.228
0.228
0.450
0.011
Standard
C02201-094
3/16"
0.098
0.092
0.228
0.228
0.450
0.012
Standard
C22519-115
3/16"
0.121
0.115
0.228
0.228
0.460
0.011
Standard
C03598-036
1/4"
0.040
0.034
0.284
0.281
0.460
0.012
Standard
C03598SS-075
1/4"
2.000
1.850
7.170
7.170
12.200
0.300
Standard
C24583-012
1/8"
0.001
0.001
0.162
0.162
0.220
0.011
Slide
C25112-049
5/32-4mm
0.059
0.049
0.228
0.228
0.440
0.011
Removable
D02350-032
3/16"
0.044
0.030
0.228
0.228
0.460
0.012
Removable
C02442-081
3/16"
0.085
0.079
0.228
0.228
0.460
0.012
Removable
C44043-081
3/16"
0.097
0.081
0.228
0.228
0.460
0.011
Removable
C02866-125
3/16"
0.129
0.123
0.228
0.228
0.460
0.011
Removable
C22310-030
1/4"
0.034
0.030
0.312
0.312
0.360
0.014
Removable
C21585-040
1/4"
0.062
0.040
0.312
0.312
0.360
0.014
Removable
0.312
0.312
0.360
0.014
Removable
10.500 10.500
6.400
0.360
Slide
C03318-125
1/4"
0.129
0.123
D98747-036M
9mm
0.001
0.001
STANDARD DESIGN
REMOVABLE LOCK
SLIDE FIT
Dart Style Trim Clips (Round Holes)
Set-up Height
Max/Min (A)
Part
Height
(h))
Stud Diameter
Max/Min (SD)
Hole Diameter
Max/Min (R)
D98728-045M
7.300
7.000
7.750
7.250
16.000 13.500 26.500
0.450
D99256-071M
4.850
4.650
7.750
7.250
16.000 13.500 26.500
0.710
D98872-045M
7.260
7.170
7.750
7.250
16.000 13.500 26.500
0.450
D98801-071M
7.300
7.000
7.750
7.250
16.000 13.500 26.500
0.710
Part Number
Material
Thick. (s)
All Dimensions in Metric
23
Most of the products featured on this page are manufactured with spring steel.
ARaymond Tinnerman offers these parts in corrosion protection and/or
aesthetically pleasing finishes. Parts may also be available in stainless steel.
Snap Fit Design
Standard Trim Clips
Part Number
Rib Thickness
(F)
Slot Width (B)
Set-up Height
Max/Min (A)
Slot
Length
(L)
Part
Height
(h)
Design
Variation
D98786-051M
1.100
0.900
6.200
5.700
7.000
6.000
20.000 14.700
G
D99299-043M
1.100
1.100
5.700
5.300
5.600
5.600
20.000
B
D98676-056M
1.380
1.120
6.200
5.700
12.250 12.250 12.000 18.200
B
D99301-064M
1.370
1.130
6.250
5.750
4.500
4.500
21.000 15.500
LV
D98646-043M
1.430
1.170
6.700
6.200
6.100
6.100
11.000
D
C58005-036M
1.750
1.250
5.600
5.200
7.000
6.000
25.400 13.000
B
D98648-051M
1.770
1.370
8.500
8.000
12.130 12.130 20.000 16.500
D
D98901-051M
1.600
1.400
6.200
5.700
8.500
D98810-051M
1.800
1.400
8.500
8.000
12.800 11.600 16.000 16.500
B
D98721-051M
2.000
1.600
8.500
8.000
8.750
20.000 15.100
C
D98640-051M
2.100
1.700
8.500
8.000
12.800 11.600 16.000 16.550
B
D98568-056M
2.100
1.700
8.500
8.000
12.130 12.130 16.000 16.500
A
7.500
7.750
7.800
9.500
20.000 14.700
GP
High Strength Trim Clips
Part Number
Rib Thickness
(F)
Slot
Slot Width (B)
Panel Thickness
Length
(F2)
(L)
Part
Height
(h)
Design
Variation
D99214-064M
1.300
1.100
6.030
5.750
3.000
0.800
20.000 15.500
-
D99142-064M
2.000
1.750
6.030
5.750
0.900
0.700
20.000 15.500
C
D98992-064M
2.100
1.900
8.750
8.250
2.800
2.300
22.000 15.500
-
D98991-064M
2.100
1.900
8.030
7.750
1.200
0.700
25.400 15.500
-
D98988-064M
2.100
1.900
8.030
7.750
1.600
1.400
25.400 15.500
-
D98976-064M
2.100
1.900
8.350
7.950
3.300
2.900
25.400 15.500
-
24
Most of the products featured on this page are manufactured with spring steel.
ARaymond Tinnerman offers these parts in corrosion protection and/or
aesthetically pleasing finishes. Parts may also be available in stainless steel.
Snap Fit Design
Dart Style Trim Clips (Square Holes)
Panel Thickness Set-Up
Dart
Width (l)
(F2)
(A)
Rib Thickness
(F)
Slot Width (B)
D98910-051M
1.100
0.900
6.650
6.150
3.250
2.750
10.700
9.000
G
D98826-051M
1.500
1.200
4.100
3.900
2.600
2.400
3.550
6.350
-
D98680-043M
1.600
1.400
6.100
5.900
2.500
2.000
NA
15.000
AB
D99311-051M
2.600
2.400
12.250 11.750
3.000
3.000
7.800
22.000
Panel 1 Throat (A)
Panel 2
Thickness (F2)
Part Number
Design
Variation
Right Angle Trim Clips
Part Number
D98652-071M
Panel 1
Thickness (F)
2.000
0.800
5.000
4.500
Set-up
Height
(A)*
Slot
Width
(B)
0.255
0.185
0.790
7.100
Slot Width (B)
0.810
0.790
Slot
Length
(L)
0.790
Single-Sided Trim Clips
Rib Thickness
Max/Min (F)
Part Number
Part
Part
Length
Width (b)
(l)
Form
0.190
0.180
Std
Std
C53121-012
0.052
0.040
C21449-014
0.090
0.040
0.250
0.156
0.161
0.151
C44725-014
0.055
0.045
0.130
0.145
0.150
0.130
Std
D57067-043M
1.500
1.000
6.600
6.100
5.250
4.750
Std
C22112-020
0.080
0.070
0.220
0.200
0.230
0.200
Alt
C27946-017
0.080
0.070
0.400
0.380
0.290
0.260
Alt
Notes: Parts can fit in slots or open cavity
* Set‐up dimension should be confirmed with ART Product Engineering
Alt Design
25
Self-Sufficient One-Piece Fasteners
product offering. For additional product refer to our web-site or contact a
sales professional.
U-CLIPS
ARaymond Tinnerman's U-Shaped Panel Clips slide easily over
metal, plastic or wooden panels providing a strong clamping
action for firm, vibration-free assembly. They are self-sufficient
requiring no holes, screws, welds, rivets or other secondary
fastening devices. Turned-up lead lips on one or both legs allow
fast assembly over the panel edges. Some are equipped with
barbs for positive retention of the panel.
S-CLIPS
U-Clip
ARaymond Tinnerman's S-Shaped Panel Clips are used for
attaching parrallel panels in opposing directions. The spring steel
"cushions" the joint, preventing chipping and other damages
during shipping and handling. They eliminate the need for holes
in panels or flanges.
S-Clip
METAL DART TYPE FASTENERS
ARaymond Tinnerman's metal dart type fasteners require no
screws or other secondary fastening devices. They require only a
cavity or mounting hole. Dart type fasteners can be applied from
the front or top of a panel eliminating many blind or limited
access fastening problems. The spring tension secures the
components between the base and knuckles of the clip. The
amount of clamping action depends on the material thickness and
design of the clip.
Dart Clip
U-CLIP SPECIALS
ARaymond Tinnerman has developed several special U-Clips to
solve specific applications, and demonstrate our comprehensive
engineering capabilities. All designs feature a "U-shaped" clip
that secures to one panel, and another feature that secures or
interferes with an additional component. There are several
design variations to consider. ARaymond Tinnerman can create
new designs if needed for specific applications.
U-Clip Special
• Universal - Can be used across most industries
• Ceiling light fixtures
FAN BALANCE CLIPS
U-Shaped or V-Shaped self-retaining fasteners are designed to
assemble to fan blades. The key objective of fan blades is to
meet a specific weight. Motor and fan manufacturers use these
to balance out fans so the unit can run properly. Weight is
usually measured in grains or ounces. Basic dimensions have also
been provided on two of the more popular series.
Fan Balance Clip - 69 Series
Fan Balance Clip - 17/18 Series
26
stainless steel.
U-Clips
DESIGN VARIATIONS
Panel Thickness
Max/Min (F)
Part Number
Part
Material Design
Part
Length
Width (b)
(l)
C25341-014
0.045
0.035
0.380
0.200
0.014
ACE
C23928-014
0.056
0.046
0.380
0.200
0.014
ACE
D20285-017
0.100
0.050
0.500
0.340
0.017
BE
D27091-014
0.185
0.115
0.500
0.420
0.014
E
D43806-014
0.205
0.170
0.500
0.430
0.014
E
C45931-014
0.255
0.245
0.500
0.360
0.014
CE
C57065-014
0.320
0.270
0.500
0.265
0.014
CD
C56147-014
0.340
0.320
0.500
0.270
0.014
CE
(A) STRAIGHT
LEGS
(B) ONE LEG
STRAIGHT
(C) SQUARE
BACK
(D) BARBS ON
ONE LEG
(E) BARBS ON
BOTH LEGS
(F) BARBS
STAGGERED
S-Clips
Part Number
Panel Thickness 1
Max/Min (F)
Panel Thickness Part
Length Material
Thick. (s)
2 Max/Min (F2) Width (b)
(l)
C53241-020
0.032
0.026
0.118
0.112
D99269-051M
0.900
0.900
2.500
2.500
C28173-025
0.080
0.040
0.136
0.120
0.500
0.545
C22306-025
0.053
0.043
0.060
0.025
0.562
D44684-020
0.080
0.048
0.110
0.070
0.375
D98707-051M
2.000
1.250
2.800
1.800
9.550
C52161-020
0.070
0.050
0.070
0.050
C58137-025
0.060
0.055
0.060
0.025
D40991-020
0.065
0.055
0.110
0.080
C58675-064M
2.000
1.500
2.000
1.500
C48766-020
0.080
0.070
0.110
0.070
0.375
Design
Variation
0.475
0.020
CE
15.050 14.000
0.510
CD
0.025
B
0.540
0.025
CD
0.530
0.020
CF
13.450
0.510
BF
0.380
0.565
0.020
CE
0.562
0.540
0.025
C
0.375
0.530
0.020
BF
12.750 19.000
0.640
E
0.020
CF
0.375
0.530
C55113-020
0.130
0.090
0.130
0.090
0.375
0.530
0.020
CE
D99044-043M
3.300
2.300
3.300
2.300
9.550
13.500
0.430
BF
C57908-043M
2.800
2.500
2.800
2.500
9.530
22.360
0.430
CF
C55638-020
0.170
0.161
0.130
0.090
0.375
0.520
0.020
CE
DESIGN VARIATIONS
(B) LEAD
UP ON
ONE LEG
(C) LEAD
UP ON
TWO
LEGS
(D) RETAINING
BARBS ON
ONE LEG
(E) RETAINING
BARBS ON
TWO LEGS
(F) RETAINING
BARBS ON
THREE LEGS
Dart Clips - Metal
Part Number
Panel Range
Max/Min (F)
Hole Diameter
Max/Min (R)
Height Length
(h)
(l)
Width Material
Thick. (s)
(b)
C22794-014
0.125
0.050
0.192
0.182
0.400
0.105
0.500
0.014
D04792-017
0.140
0.095
0.317
0.307
0.550
1.080
0.218
0.017
27
stainless steel.
U-Clips - Special
Panel Thickness
Max/Min (F)
Part Number
Leg
Height
(h)
Part
Width
Part
Length
(l)
Material
Design
Thickness
Variations
(s)
C44140-014
0.035
0.025
0.350
0.500
0.460
0.014
BFI
C20597-017
0.048
0.042
0.610
0.500
0.300
0.017
BFJ
C23259-017
0.062
0.042
0.525
0.500
0.290
0.017
BFJ
C29019-014
0.065
0.055
0.360
0.500
0.310
0.014
BFH
C41412-017
0.090
0.070
0.525
0.500
0.290
0.017
BEJ
C21527-014
0.105
0.075
0.315
0.500
0.410
0.014
FH
C28015-025
0.110
0.030
0.190
0.875
0.635
0.025
FI
C54150-017
0.125
0.120
0.545
0.500
0.260
0.017
FIJ
C25672-017
0.140
0.125
0.545
0.500
0.260
0.017
BCFJ
D99073-043M
1.040
0.780
9.440
12.700
8.280
0.430
BFI
D98920-043M
1.950
1.820
3.000
25.400 10.500
C28036-017
0.110
0.090
0.180
C58664-064M
2.750
2.650
3.000
D98672-064M
3.100
1.100
1.000
18.000 17.500
0.640
CR
C58172-064M
3.550
3.450
0.075
12.700 17.800
0.640
CERZ
D28601-014
0.077
0.067
0.196
0.500
0.350
0.014
EP
C58521-028
0.080
0.080
0.080
0.437
1.125
0.028
P
D47463-017
0.115
0.105
0.240
0.500
0.380
0.017
AP
(I) LEG
STRAIGHT
0.430
FJ
0.350
0.017
BFS
21.000 18.500
0.640
CEGR
0.500
(H) LEG BENT
OUTWARD
Refer to U-Clip design variations for A through E
Balance Clips - 69 Series Thin Blade
(J) RIGHT
ANGLE AT
BASE
(K) A2 FINGER
RADIUSED
(L) FINGER
BENT INWARD
(P) EXTERNAL
BARB INTO
CAVITY
(R ) LEAD-INS
EXTENDED
(S) LEAD-IN
EXTENDED
Balance Clips - 17-18 Series Thick Blade
Weight
(Grains)
Part
Width
Part
Length
(l)
Part
Height
(h)
97-09017
6.25
0.216
0.630
0.030
0.013
0.000
17-1
0.13
0.625
1.076
0.738
0.020
69-125
12.50
0.343
0.795
0.078
0.012
0.000
17-2
0.25
1.125
1.173
0.774
0.020
97-09016
12.50
0.435
0.630
0.030
0.013
0.000
17-3
0.50
1.500
1.062
0.778
0.031
69-25
25.00
0.343
0.782
0.078
0.025
0.020
17-4
1.00
2.500
1.057
0.743
0.035
69-37 1/2
37.50
0.515
0.833
0.078
0.025
0.015
17-5
1.50
2.500
1.057
0.782
0.047
69-50
50.00
0.688
0.816
0.078
0.025
0.020
17-6
2.00
2.500
1.043
0.655
0.062
97-09009
62.00
0.860
0.810
0.078
0.026
0.020
18-1/4
0.25
0.500
1.750
1.187
0.028
18-1/2
0.50
1.000
1.750
1.187
0.028
Part Number
Material
Gap Max
Thickness
(F)
(s)
69-75
75.00
1.032
0.814
0.078
0.025
0.020
97-09011
87.00
1.203
0.810
0.078
0.026
0.020
69-100
100.00
1.375
0.826
0.078
0.025
0.020
69-150
150.00
1.500
0.897
0.156
0.032
0.030
69-200
200.00
2.000
0.890
0.156
0.032
0.030
Part Number
Part
Width
Part
Length
(l)
Part
Height
(h)
Material
Thickness
(s)
h
l
s
Weight
(Ounce)
.040
Approx.
s
h
l
F
28
Push-Pins
sales professional.
Plastic Self-Retaining Fasteners
PUSH-PINS (A)
ARaymond Tinnerman's Plastic Push-Pins are versatile fasteners with many
diversified application possibilities. They may be used for light retention as hole
plugs, bearings or spacers and are ideally suited for simplified assembly or
products shipped knocked-down for consumer assembly. In addition to being
corrosion-proof, push-pin fasteners are shock and vibration resistant, and will
not work loose.
FIR TREE FASTENERS (B) **NEW**
Similar to plastic darts, these fasteners hold two panels together without the
need for screws or other secondary fastenening devices. The fir tree barbed
feature digs into the panels with ease, requiring minimal force to apply. The fir
tree can accommodate a wide panel range, and is assembled into holes or
cavities.
PLASTIC PUSH-RIVETS (C) **NEW**
These two-piece plastic fasteners work like metal rivets but do not require
special tools for assembly. The button or plunger is pushed into the center of
the dart shaped pin, causing the legs to expand behind the mating panel and
provides an uncharacteristically strong joint for a plastic fastener. Plastic rivets
are ideal for assemblies where special tooling is not permissible and/or threaded
fasteners are not a viable option. Many of these parts are serviceable.
Plastic Panel Pin Fasteners
Panel Range
Max/Min (F)
Hole Diameter
Max/Min (R)
Height
(h1)
Head
Diameter
(d1)
Head
Height
(h)
Part
Type
C61546AG-028
0.100
0.035
0.192
0.182
0.475
0.420
0.100
A
C61782AA-060
0.100
0.060
0.192
0.182
0.595
0.445
0.062
A
C61622AG-130
0.180
0.130
0.192
0.182
0.555
0.420
0.100
A
C61375AG-170
0.234
0.170
0.192
0.182
0.595
0.420
0.050
A
C61758AG-170
0.234
0.170
0.192
0.182
0.595
0.445
0.062
A
Part Number
C63100AA
6.640
2.540
6.500
6.200
15.530 17.780
2.500
B
C62571AA
12.700
1.500
10.400
9.500
20.250 21.150
3.660
B
207926
4.500
4.500
15.000 15.000 13.700 22.000
4.500
C
017489
4.600
4.600
12.000 12.000 10.000 18.000
6.000
C
020074
5.000
4.500
10.000 10.000 11.500 17.800
5.000
C
013011
7.000
4.000
8.700
7.900
12.000 16.000
2.000
C
018610
7.000
0.800
8.800
7.800
13.000 15.500
4.500
C
201793
7.500
2.000
8.300
8.100
13.000 20.500
3.000
C
018795
8.000
3.000
5.100
4.600
11.500 15.000
3.000
C
015269
8.500
2.500
7.000
7.000
17.000 15.000
6.000
C
208580
8.500
7.500
14.000 14.000 20.000 21.000
4.000
C
202493
10.000
3.000
6.500
14.000 22.000
2.600
C
29.500 28.500 12.000 11.500 50.200 30.000 15.000
C
C62381AA
6.500
M
The dimensions of the above parts are for reference only. For complete design information please contact your 29
Wire Management
Plastic Clips, Ties, Assemblies
The product displayed on this catalog is a preferred sampling of
the larger product offering. For additional products, refer to our
website or contact a sales professional.
ARaymond Tinnerman plastic cable clips and ties offer the most
reliable means of securing cable, wire and tubing safely away from
moving parts and panel edges that can cause damage. Parts are
manufactured out of high quality nylon or acetal materials and are
available in several standard designs for a wide range of tube and
wire diameters and panel thicknesses. In addition, plastic
components can be combined with spring steel clips for improved
performance and retention.
Tape-On Clips
The assembly of these parts is included in the bundling assembly
operation. Once affixed to the wire with tape, the bundle is
transported to the final assembly location. These parts have a
feature that installs reliably into a hole on an adjacent panel or onto
a nearby stud. Parts are simple to install, reliable and inexpensive.
Cost of assembly is included within wiring bundle process.
Value Added Cable Ties
Standard cable ties accommodate a wide range of tube or wire
bundle diameters. ARaymond Tinnerman cable ties combine tie
straps with additional features to attach to panels or components.
Cable ties are combined with fir trees, dart style, edge mounting and
other assembly options. The self-retaining features on all ARaymond
products ease the assembly of the cable bundle to the cable strap.
Performance Specification – Tensile strength of the bundle is 45 lbs.
minimum. Recommended tightening load should not exceed 28 lbs.
Application specific testing provided upon request.
Assemblies - Swivel Clips
Wire management assemblies combine metal and plastic components
to provide the optimized assembly solution. Swivel clips rotate with
respect to each other. The versatile swivel clips can accommodate
different panel sizes and orientations, eliminating the number of
fasteners required in a manufacturing facility or in the field.
Create your own – Only a select few swivel clip combinations are
represented in this brochure. In most cases, the swivel clip
component can be combined with other swivel clip components to
create a unique solution. If possible, try to select from the list
provided. These are more readily available.
Performance Specification – Retention between swivel clip
components is 25 lbs minimum. Application specific testing provided
upon request.
30
Wire Management
Material: Most products are made with high quality nylon and
acetal materials. Additives are added to improve the strength,
temperature resistance, and UV stabilization.
Plastic Cable Clips and Ties
Tape On - Stud Mount
Tape On - Plug Mount (Fir Tree)
Part Number
(T) Screw Specification
(e) Off-set
(mm)
Part Number
(F) Panel
Thickness
(R) Hole
Diameter
(e) Off-set
(mm)
164440
M6x1.0 or 1/4‐20
14.0
164452
0.70 / 4.0
6.1 / 6.5
32.0
Cable Tie - Plug Mount (Fir Tree)
Cable Tie - Plug Mount (Dart - Universal)
Part Number
(D1) Tube /
Bundle Dia.
(F) Panel
Thickness
(R) Hole
Diameter
Part Number
164460
1.0 / 40.0
.70 / 4.0
6.1 / 6.5
175200
(D1) Tube / (F1-2) Panel
Bundle Dia. Thickness
1.0 / 40.0
.60 / 3.0
(R) Hole
Diameter
6.2 / 7.2
All dimensions are metric
31
Material: Most products are made with high quality nylon and acetal
materials. Additives are added to improve the strength, temperature
resistance, and UV stabilization. Edge-biter components are made with
spring steel.
Wire Management
Swivel Clip Assemblies
Swivel Tie - Plug Mount (Fir Tree)
Swivel Tie - Tie Mount
Part Number
(D1) Tube /
Bundle Dia.
(F) Panel
Thickness
(R)Hole
Diameter
Part Number
(D1)Tube /
Bundle Dia.
(D2) Tube /
Bundle Dia.
168821
8.0 / 33.0
0.8 / 6.0
6.5 / 6.7
168780
8.0 / 50.0
8.0 / 50.0
Swivel Tie - Edge Mount
Swivel Tie - Tape On Mount
Part Number
(D1) Tube /
Bundle Dia.
(F) Panel
Thickness
Part Number
(D1) Tube /
Bundle Dia.
168971
8.0 / 50.0
2.0 / 4.0
168806
8.0 / 50.0
32
Wire Management
Material: Most products are made with high quality nylon and acetal
materials. Additives are added to improve the strength, temperature
resistance, and UV stabilization.
Swivel Clips
Swivel Tie - Tube Mount
A
C
Part Number
(D1) Tube
Diameter
(D2) Tube /
Bundle Dia.
Design
Variation
168750
6.0 / 6.5
8.0 / 50.0
A
081717
8.0 / 9.0
8.0 / 20.0
A
168869
8.0 / 9.0
8.0 / 50.0
A
168787
9.5 / 10.5
8.0 / 20.0
A
168797
9.5 / 10.5
8.0 / 33.0
A
168853
9.5 / 10.5
8.0 / 50.0
A
168803
11.0 / 13.0
8.0 / 33.0
A
168752
15.0 / 16.0
8.0 / 50.0
A
168804
15.0 / 16.0
8.0 / 33.0
A
082282
16.0 / 18.0
8.0 / 33.0
A
168751
18.0 / 20.0
8.0 / 20.0
A
168781
18.0 / 20.0
8.0 / 33.0
A
081190
22.0 / 24.0
8.0 / 33.0
A
202609
28.0 / 30.0
8.0 / 33.0
A
214116
12.6 / 13.2
8.0 / 33.0
C
082646
7.8 / 8.5
8.0 / 33.0
G
G
Swivel Tube - Plug Mount (Fir Tree)
Swivel Tube - Tube Mount
Part Number
(D1) Tube
Diameter
(F) Panel
Thickness
(R) Hole
Diameter
Part Number
(D1) Tube
Diameter
(D2) Tube
Diameter
081568
8.0 / 9.0
0.8 / 6.0
6.3 / 6.7
168791
8.0 / 9.0
4.3 / 5.2
33
Wire Management
Spring Clips
The product displayed on this catalog is a preferred sampling of the larger
product offering. For additional product refer to our website or contact our
sales professional.
CABLE CLIPS
ARaymond Tinnerman Spring Clips offer the most efficient means
of securing cable, wire and tubing safely away from dangerous
areas. Made of heat-treated high carbon spring steel these onepiece, self-retaining fasteners require only a mounting hole,
flange end, or panel edge for fast, easy installation. Available in
several standard designs for a wide range of wire diameters and
panel thicknesses, many have rolled edges as an added safeguard
against fraying or chafing and can also be supplied with a dipped,
neoprene cushion. Spring clips are easy to install and provide
positive retention for reliable, trouble-free service.
Cable Clip - Edge Mount (Bundle)
Parts secure hoses and wire bundles by self-retaining to adjacent
panels via barbs. After easily snapping into place, cables or wires
are installed to a serviceable wire retention feature. The
opening of the spring clip accepts small wires, and the clip itself
holds multiple wires simultaneously.
Cable Clip - Edge Mount (Tube)
Parts work similarly to Bundle - Edge Biter Clips except clip is
designed to hold one cable, tube or wire.
Cable Clip - Plug Mount (Dart)
Parts work similarly to Bundle/Tube - Edge Biter Clips, but
instead of retaining to the panel via barbs, the part is assembled
through a hole or slot in a panel via a dart feature. The design of
the hose retaining feature can accommodate one single tube or
multiple smaller tubes, wires, and/or cables.
Cable Clip (Heel Toe)
These self-retaining clips are simply positioned in the mounting
hole. Pressure pushed on the back of the clip forces it forward
until the "heel" snaps into a locked position. Depending on the
design of the parts, these clips can either hold one single tube or
multiple smaller tubes, wires, and/or cables.
Benefits – Parts are simple to install, are reliable and
inexpensive.
Performance Specifications – Application dependent but most
cable clips install around 10 lbs. and retain about 15 to 20 lbs.
Application specific testing provided upon request.
34
steel. Parts may also be available in stainless steel. ARaymond
Tinnerman offers these parts in corrosion protection and/or aesthetically
pleasing finishes.
Wire Management
Spring Clips
Cable Clip - Edge Mount (Bundle)
Part Number
(F) Panel
Thickness
(D) Tube
Diameter
Max # of
Tubes
Part Height
(h)
Part Width
(s) Material
Thickness
C23747-017
.025 / .055
.085 / .095
12
0.830
0.375
0.017
C41892-017
.032 / .052
.185 / .195
2
0.710
0.375
0.017
C43641-017
.031 /. 082
.120 / .130
9
0.710
0.375
0.017
D98281-017
.054 / .089
.085 / .095
7
0.695
0.375
0.017
C45065-017
.060 / .089
.151 / .161
3
0.670
0.375
0.017
C24837-017
.115 / .135
.120 / .130
9
0.720
0.375
0.017
D46088-017
.040 / .080
.245 / .255
1
0.800
0.565
0.017
Part Height
(h)
Part Width
(s) Material
Thickness
Cable Clip - Edge Mount (Tube)
Part Number
(F) Panel
Thickness
(D1) Tube
Diameter
Design
Variations
C20154-017
.036 / .044
.085 / .095
GK
0.360
0.375
0.017
D99145-051M
2.35 / 3.20
9.0 / 9.5
D
10.200
12.700
0.510
C58548-051M
3.00 / 4.00
9.0 / 10.5
F
23.100
15.880
0.510
D99207-051M
5.80 / 6.20
8.51 / 8.76
CD
15.200
12.700
0.510
C55726-020
.250 / .290
.335 / .345
CD
0.615
0.500
0.020
(D)
BARBS
ON ONE
LEG
(E)
BARBS
ON
BOTH
LEGS
(F)
BARBS
STAGGERED
(G) TAB
OR
DIMPLE
ON LEG
Cable Clip - Plug Mount (Dart)
Cable Clip (Heel Toe)
Part Number
Panel
Range
Dia. Wire
Max # of
Tubes
D22999-017
0.8. / 1.0
2.8 / 12.7
1
(K)
SHAPED
IRREGULARLY
Part Number
(F) Panel
Thickness
(D1) Tube
Diameter
Max # of
Tubes
C55966-022
.054 / .089
.187 / .250
1
C58497-064M
.64 / 1.02
7.0 / 9.0
1
35
Rev. 1
October, 2013
“ARaymond Tinnerman” means, in this Brochure, A RAYMOND TINNERMAN INDUSTRIAL, Inc. that is the editor of this Brochure.
“Brochure” means the information and any materials available in this Brochure including, without any limitation, pictures,
datasheets, product descriptions, etc.
This Brochure does not constitute an offer or an agreement of any kind.
This Brochure does not constitute a technical note.
The Brochure is provided “as is” and only for evaluation purpose.
ARaymond Tinnerman makes no warranty or representation whatsoever regarding the Brochure, its use or its suitability to meet specific needs.
ARAYMOND TINNERMAN DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE ACCURACY, RELIABILITY, NOVELTY,
COMPLETENESS, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OFTHE INFORMATION, NOR THAT WILL ITS USE NOT INFRINGE ON ANY THIRD PARTY’S RIGHTS.
ARaymond Tinnerman is not liable for any incidental, consequential or special damages of any kind due to the use of the Brochure. The Brochure and/or its contents is copyrighted works of ARaymond Tinnerman and may be also
protected by trademark laws, patent laws or other laws. All other copyrights, trademarks or patents not owned by ARaymond Tinnerman are the property of their respective owners. The only use permitted is to consult the Brochure. Any
rights not expressly granted herein are reserved. Except as expressly specified in these terms, nothing contained herein shall be construed as conferring any license or right of any copyright, trademark, patent, or proprietary rights. Any
unauthorized use of this Brochure may violate rights, and so, ARaymond Tinnerman or any third party concerned may claim any damages or losses suffered. If you need further information, please contact ARaymond Tinnerman.
ARaymond Tinnerman Industrial, Inc.
1060 W 130th Street
Brunswick, OH 44212
330.220.5100, 800.221.2344
www.araymondtinnerman.com

Engineered Fastening Solutions

Transcription

Similar documents

Preferred Product Catalog

Building Code Training – August 30th at Burgundy Basin Inn

Grid-Wall Panel installation instructions

Heartnut Production

Microtherm® Overstitched Panel - Inn

RAPID-1 INGLES

Advantages of the Camloc 1/4-Turn Fastener Components Important

HIKVISION ARG-77xxseries

series 400 technical details

MFJ-4125P - KG4RUL.INFO

Magpie Messenger - Heathcote Public School