HandRail LaneLED INOX - GIFAS

Transcription

HandRail LaneLED INOX - GIFAS
YOUR WISH IS OUR COMMAND
HandRail
HR-LaneLED-INOX
Product information
09|15
Utilising Synergies – Creating Safety
Hand rails with LED lighting: Increased safety in a sophisticated design
As an established manufacturer of emergency lights for road and rail tunnels using LED technology, we have accumulated a wealth of knowledge
and know-how. Based on this experience, we are taking another step
towards providing safety everywhere people go with our LED-illuminated
hand rails.
In general
A hand rail is a rail within easy reach that people can hold on to or allow
themselves to be guided by. Most hand rails come in the form of posts,
rails or bars. Common materials used are metal, wood, wood composites or plastic. A hand rail can be the upper part of a balustrade or railing.
It can also be attached directly to a wall.
Requirements
A "fixed" hand rail is required by law. "Rigging", meaning hand rails made
with rope, are only intended as decoration since they could give way in
case of a fall. Hand rails should be as round as possible and have a diameter of between 20 and 45 mm. They should be continuous and ideally
extend past the first and last steps of stairs.
Our services
All of our calculations and drawings are prepared in close cooperation
with planers. This guarantees that the LaneLED-INOX handrail is implemented according to customer specifications.
GIFAS also offers the following services:
- Planning and concept development as per specifications
- Relux lighting calculation
- Consultation and support through our field service
- Creation of object-specific plans and documents
- mutual support among the partner companies,
contact mediation
In the following pages, you will find an overview of the functioning principles and benefits of the LaneLED-INOX, as well as detailed information
about the individual components.
We are always very happy to answer any of your questions.
It should be possible to grip them securely, they should be warm to the
touch, round or oval and have a diameter between 30 - 45 mm. They must
run continuously (even in front of windows and recesses), be installed at
a height of 85 to 90 cm and should extend at least 30 cm past the first and
last steps of stairs. Tactile, meaning noticeable and if possible contrasting, elements should signal the beginning and end.
('
/
Applications
Underpasses and overpasses in railway stations
Escape route and emergency staircases
Decorative applications in office or exhibition wings
Hospitals and nursing homes
Schools and day care centres
Shopping and meeting areas
Hotels and restaurants
/('
('
/
/('
-
/('
/('
This innovation is based on different directives, such as DIN 18065,
information from the Swiss Competence Centre for Accident Prevention (bfu) and SUVA recommendations.
=XOHLWXQJ
'HU+DQGODXIZLUGLQ(LQ]HOWHLOHQJHOLHIHUW
6RNDQQGHU0RQWHXUGHQ+DQGODXIYRU2UWRSWLPDODQGLH*HJHEHQKHLWDQSDVVHQ
GIFAS-ELECTRIC GmbH
Dietrichstrasse 2
CH-9424 Rheineck
Handlauf V2A Spital Basel
www.gifas.ch / [email protected]
Tel. +41 71/886 44 44 / Fax +41 71/886 44 49
Farblegende:
rot =
Licht
blau =
Wand, Treppe, Boden
grün =
Abstand Stützen
schwarz = Handlauf und Zubehör
Art.-Nr. : 164329
03.11.2015
Blatt 1/1
thsh
Detailed technical drawing of LaneLED-INOX handrail project.
3D drawing of LaneLED-INOX handrail
2
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck
System components of the HR-LaneLED-INOX
The LaneLED light bar as
"base element"
The INOX hand rail made from stainless steel V2A as "carrier element"
+
Different wall fastenings, Transition and
end pieces as "assembly elements"
Connection distributors and control
units as "supply elements"
=
The symbiosis of perfected technology
HandRail
HR-LaneLED-INOX
Metal pipe rail with integrated lighting – safety and effect lighting in one
+41 71 886 44 44 ·
+41 71 886 44 49 ·
[email protected] ·
www.gifas.ch
3
3
Light bar
current collector
Item no. 136230
Current collector, quadripartite
Item no. 128992
Cable entry piece
Item no. 115788
System cable 2 x 2.5 mm2
System cable
2 x 2.5 mm2
Aluminium profile
LED plates encapsulated,
IP67
Connection cable
with 2-pin plug
Item no. 128985
Aluminium profile
Item no. 128993
Lateral cover
LED set, selection according to
required lighting strength
Item no. 139590
Connection cable
GIFAS-LaneLED
Current collector
The LaneLED-INOX light bar from GIFAS is the base element for the illuminated hand rail HR-LaneLED INOX. The appropriate type is selected
depending on the requirements of the operator, whereas the desired
lighting strength is the most important specification.
The other parameters of the LaneLED are carefully defined.
Each individual LaneLED is connected to the power supply via the current collector and is freely attachable to the flat cable 2 x 2.5 mm2.
The cable bushing serves as the interface to the current collector and the
connection cable with plug of the LaneLED (IP67 connection).
23.4
14
– Light colour: 4'500 - 5'000 K
– Beam angle: 120°
– Protection class: IP67
LaneLED-INOX light bar
GIFAS LaneLED coated with special profile ALU, approx. 30 x 25 x 2'960 mm
with LED modules type 4 - 7, beam angle 120°, completely ready for connection, not including assembly materials (system cable and current collector).
16.8
Illumination
Cone of light when in use with the INOX hand rail
Current collector
Supply cable
2 x 2.5 mm2
Ø 42.4
The carrier profile of the LaneLED-INOX light bar consists of a special
aluminium profile with special characteristics for mechanical and chemical properties.
A flexible and separable LED strip is inserted from below and incorporated into the ALU profile with 2K casting compound. The encapsulation
leads to the high protection class of IP67.
There is room for the cable guide and the current collector in the upper
part of the profile (in between the flanks).
22.9
Composition of the LaneLED-INOX
Hand rail
102°
Wall fastening element
Accessories LaneLED
Item no. Description
115788 System cable Light, black - copper plated
Flat cable EPR/EPR 2 x 2.5 mm²
136230 HRS current collector 2P, 42V-5A, V4A contact part connector with metal bracket, thread base plate and set screw
860100 INOX holding clamp V2A to HR-LaneLED-INOX
Staircase lighting graveyard Glis
4
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck
Light data / Range LaneLED INOX
Technical data LaneLED – Light comparison measurements
Perfect light for each application! An overview of the values that can be
achieved with LaneLED light bar type 4 to 7 follows
Basis
LaneLED types 4 to 7 in a hand rail at a height of 80 cm across a 2 m
wide staircase provide the following values with regard to their lighting
strength.
LaneLED light bar type 4, IP67, 5'000 K, 21 - 28 VDC
LaneLED light bar type 6, IP67, 5'000 K, 21 - 28 VDC
Item no. LED W/mA
Length
Item no. LED W/mA
Length
860141
24
8 W - 320 mA
2'997 mm
400 lm 90 Lux - 95 cm
860150
72
24 W - 960 mA
2'997 mm 1'200 lm 250 Lux - 95 cm
860140
12
4 W - 160 mA
1'497 mm
200 lm 90 Lux - 95 cm
860149
36
12 W - 480 mA
1'497 mm
600 lm 250 Lux - 95 cm
860139
6
2 W - 80 mA
724 mm
100 lm 90 Lux - 95 cm
860148
24
8 W - 320 mA
1'004 mm
400 lm 250 Lux - 95 cm
860147
12
4 W - 160 mA
513 mm
200 lm 250 Lux - 95 cm
860146
6
2 W - 80 mA
268 mm
100 lm 250 Lux - 95 cm
Lumen
Lux
Hand rail height 80 cm, stair case width 2 m, beam angle hand rail 0°:
One-sided
Lumen
Lux
Hand rail height 80 cm, stair case width 2 m, beam angle hand rail 0°:
One-sided
0
1
2
3
4
5
6
7
8
9
10
0
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
Two-sided
Two-sided
0
1
2
3
4
5
6
7
8
9
10
LaneLED light bar type 5, IP67, 5'000 K, 21 - 28 VDC
LaneLED light bar type 7, IP67, 5'000 K, 23 - 25 VDC
Item no. LED W/mA
Length
Item no. LED W/mA
Length
860145
36
12 W - 480 mA
2'997 mm
600 lm 135 Lux - 95 cm
860155
114 65 W - 2'660 mA
2'997 mm 5'260 lm 370 Lux - 95 cm
860144
18
12 W - 240 mA
1'497 mm
300 lm 135 Lux - 95 cm
860154
54
30.6 W - 1'260 mA 1'497 mm 2'490 lm 370 Lux - 95 cm
860143
12
4 W - 160 mA
1'004 mm
200 lm 135 Lux - 95 cm
860153
36
20.5 W - 840 mA
860142
6
2 W - 80 mA
513 mm
100 lm 135 Lux - 95 cm
860152
18
10.2 W - 420 mA
513 mm
830 lm 370 Lux - 95 cm
860151
6
3.4 W - 140 mA
184 mm
275 lm 370 Lux - 95 cm
Lumen
Lux
Hand rail height 80 cm, stair case width 2 m, beam angle hand rail 0°:
Lumen
Lux
1'004 mm 1'660 lm 370 Lux - 95 cm
Hand rail height 80 cm, stair case width 2 m, beam angle hand rail 0°:
One-sided
One-sided
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
Two-sided
Two-sided
0
1
2
3
4
5
6
7
8
9
10
Other light colours (3'000 / 4'000 K) are available on request.
+41 71 886 44 44 ·
+41 71 886 44 49 ·
[email protected] ·
www.gifas.ch
5
Technical data
Item no. 115788
System cable 2 x 2.5 m2
Support
Connection bracket
LED set, selection according
requested luminous intensity
Item no. 146789
screw 3 x 12
Item no. 136230
Current collector
Item no. 860100
Holding clamp
Casting compound 2c cast
resin PUR transparent
Support
Cable cover with
0.5 m cable
42.4
GIFAS hand rail INOX
The hand rail profile from GIFAS made from stainless steel V2A is the
carrier element for the HR-LaneLED-INOX system.
The profile and the various fastening and connecting items are designed
and coordinated in a way that ensures the electric supply with the cable.
19.5
Current collector
Supply cable
2 x 2.5 mm2
14.4
The INOX profile contains a dovetail slot as a holding fixture for the light
bar. This design was chosen specifically to protect against vandalism.
Following successful sub-assembly, the light bar (complete mechanical
installation) must be inserted lengthwise and secured in the slot. The
connecting and fastening parts allow the cable routing to pass through.
40.3
Composition of the INOX hand rail
Handrail
LED Module
Encapsulation
Range
The individual, customised production of INOX handrails has a particular
appeal.
Each INOX handrail is built according to customer specifications and
is available for wall installation or as a free-standing stainless steel rail.
Customers can also choose among different types of handrail supports
(round, bent, angled) and end pieces.
We offer all mounting options – from handrail consoles and wall installation to mounting on supports.
Hand rail supports-wall fastening INOX
End pieces / caps INOX
Hand rail supports-attachment mounting INOX
As end piece for the hand rail
As attachment on rail posts
6
For easy lateral and height positioning
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck
System components power supply
System components power supply
The electric power supply of the LaneLED light bar is ensured through
power supplies that are individually installed into the main or sub-distribution or that are directly built into the housing on site. (housing hard
rubber or in polycarbonate housing)
The supply voltage is 24 VDC and it is generated with a power pack
230 VAC – different output sizes are available! (In each case depending
on the total lighting length and the performance of the desired LED light
output).
Item no. 150073
Power supply with
2x power pack 240 W – 230 VAC / 24 VDC
110 mm
deep
Power supply distributor LaneLED (example)
Specifications:
Combination of switching devices for power supply LaneLED
Colour grey RAL7035, halogen-free polycarbonate housing,
300 x 230 x 110 mm (W x H x D) IP66
LED supply 24 VDC cable 2 x 2.5 mm2
IS CONNECTED ON SITE!
Equipment:
Power pack 230 VAC / 24 VDC (output and quantity object-specific)
2 cable connections M20 x 1.5 (cable 2 x Ø 5 mm)
1 cable connection M25 x 1.5 (cable 2 x Ø 13-18 mm)
Item no. 150077
The LaneLED light bars can be dimmed and their brightness can be adjusted continuously with a regular rotary dimmer.
Power supply with
1x power pack 320 W – 230 VAC / 24 VDC
Item no. 150072
Power supply with
1x power pack 240 W – 230 VAC / 24 VDC
165 mm deep
LED supply 24 VDC cable 2 x 2.5 mm2
IS CONNECTED ON SITE!
110 mm deep
Item no. 150080
LED supply 24 VDC cable 2 x 2.5 mm
IS CONNECTED ON SITE!
2
Power supply with
2x power pack 320 W – 230 VAC / 24 VDC
Item no. Description
143941
142737
104780
150072
Power packs 230 VAC / 24 VDC - 240 W, IP67, dimmable
Power packs 230 VAC / 24 VDC - 320 W, IP65, dimmable
UP rotary dimmer 1-10 VDC white
Power supply distributor LaneLED complete with 1 power
pack 230 VAC / 24 VDC – 240 W IP66
150073 Power supply distributor LaneLED complete with 2 power
pack 230 VAC / 24 VDC – 240 W IP66
150077 Power supply distributor LaneLED complete with 1 power
pack 230 VAC / 24 VDC – 320 W IP66
150080 Power supply distributor LaneLED complete with 2 power
pack 230 VAC / 24 VDC – 320 W IP66
+41 71 886 44 44 ·
+41 71 886 44 49 ·
[email protected] ·
www.gifas.ch
165 mm deep
LED supply 24 VDC cable 2 x 2.5 mm2
IS CONNECTED ON SITE!
7
We reserve the right to make technical modifications.
V1115
GET IN TOUCH WITH US
News about the assortment and specific solutions
you can find on our website:
www.gifas.ch
GIFAS-ELECTRIC GmbH
Dietrichstrasse 2
CH-9424 Rheineck
+41 71 886 44 44
+41 71 886 44 49
[email protected]
www.gifas.ch

Similar documents