Hy-rail for backhoe loaders

Comments

Transcription

Hy-rail for backhoe loaders
1003
HY-RAIL FOR BACKHOE LOADERS
For the most common types of backhoe loaders.
The Front Hy-Rail is designed to fit between the attachment and the
bracket. Due to the design it is possible to use the machine with front
bucket or fork attachments without dismounting the Hy-Rail.
The Rear Hy-Rail is designed to fit underneath the digging arm.
Hydraulically controlled from the operators cabin. Support legs and
Hy-Rail can be used separately or together without interference.
S P E C I F I C A T I O N S
Rail wheel, diameter 350 mm / 250 mm
Weight
350 kg / 700 kg
Gauge, std
1435 mm
Maximum load
12 000 kg / 20 000 kg
Designed according to UIC specifications and fitted with SKF conical
bearings.
Easy to get on and off track. Can be used together with other attachments.
No damage to the rail and easy bolt on fixing.
Please note that he unit pictured could be equipped beyond standard.
The company reserves the right to make changes without prior notice.
Innovation House, 3 Western Wood Way, Langage Science Park
Plymouth, PL7 5BG, Devon, UNITED KINGDOM
Email: [email protected] Website: www.vortok.co.uk
Phone: +44 (0) 1752 349200 Fax: +44 (0) 1752 338855

Similar documents