2014 product guide

Transcription

2014 product guide

2014 PRODUCT GUIDE
FOREWORD
We’ve been very busy over the past year and we’re
pleased to showcase some of what we’ve been up to
throughout the following pages. We’ve taken personal
protection for law enforcement officers to the next level
with our new HitCoat™ and we’ve introduced entirely new
product categories such as the SIX12™ shotgun. We’ve
also developed a host of new products in our existing
categories such as our innovative new one-piece garments,
new outerwear options, new load carriage products, and
our new AirFrame ATX™.
Our focus is always on those who safeguard our freedoms
both domestically and against foreign enemies. Our
mission is to better equip them to do their work. Freedom
comes first for our customers and it comes first for us as
well. We support our government as chartered, one whose
primary task is to safeguard our individual liberties. But
safeguarding our freedoms is becoming more and more
complicated as we struggle not only against increasingly
elusive external threats but also against an unprecedented
level of domestic overreach—sometimes by the very groups
chartered with defending our liberties, and often under the
pretense of doing so. In 2013, we learned several facts that
should alarm any citizen regardless of political view. Among
other things, we learned that none of our private domestic
phone communications or emails are really private and that
several federal agencies were caught abusing their authority
by targeting domestic political enemies.
If we are willing to sell our precious freedom for something
as cheap as a politician’s hollow promise of increased
security, or if we give up our liberties bit by bit to appease
hysterical demands for "more safety" well then, we deserve
our fate. But I for one am not interested in giving up any
more of my freedoms. I want to live in a country that does
not betray all those men and women who have sacrificed
everything to protect what this nation stands for. Defending
freedom is not just a task for the military; it’s every citizen’s
responsibility. Here we pledge to continue our commitment
to those who protect liberty and we re-affirm our promise to
oppose those who seek to diminish and destroy it. The best
weapon against those who seek to unjustly confine us is
simply to refuse to go along with their nonsense.
Freedom doesn’t offer any guarantees, freedom doesn’t
promise any free stuff, and freedom doesn’t give everybody
a ribbon for participating. Like life itself, freedom is
inherently risky—but it’s always worth it. We all need to
defend our freedoms to the fullest extent of our abilities.
It’s the least we owe the many thousands of Americans
who’ve given their lives to secure those rights for us.
Caleb Crye
January 2014
CONTENTS
APPAREL
01
G3 COMBAT UNIFORM™
03 G3 ALL WEATHER COMBAT UNIFORM™
05 G3 FIELD UNIFORM™
07 ALL WEATHER FIELD PANT™
08 COMBAT PANT LE01™
09 FIELDSUIT™
10 COMBATSUIT™
11 LWF JACKET™
12 LOFT JACKET™
13 FIELDSHELL 2™
14 WINDLINER™
15HALFJAK™ INSULATED
16 COMPACT ASSAULT GHILLIE™
17SKULLCAP™
18AIRFLEX™ PADS
CAGE PLATE CARRIER (CPC)™
33 CAGE ARMOR CHASSIS™
34 ZIP-ON PANELS
35LV-RBAV™
36LV-MBAV™
37 MODULAR RIGGER’S BELT (MRB)™
38AVS™ LOW PROFILE BELT
39 BLAST HIGH BACK BELT™
40BLAST LOW PROFILE BELT™
41StKSS™
42 SMART POUCH SUITE™
43 ARMOR COMPONENTS AND ACCESSORIES
48SIX12™
52GUNCLIP™
54MAGCLIP™
ARMOR + EQUIPMENT
HITCOAT™
22 HITCOAT VEST™
23 HITCOAT SLEEVES™
24 LOW PROFILE CHEST RIG
25 ADAPTIVE VEST SYSTEM (AVS)™
26 AVS SYSTEM COMPONENTS
27 AVS™ CHEST RIG
28 AVS™ PADDED YOKE
29AIRLITE™ PLATE CARRIERS
30AIRLITE™ CHEST RIG
31 JUMPABLE PLATE CARRIER (JPC)™
21
ARMOR + EQUIPMENT (CON'T)
32
HEADBORNE SYSTEMS
57AIRFRAME™
58AIRFRAME™
ATX
ATTACHMENTS
60AIRFRAME™ ACCESSORIES
61AIRFRAME™ HELMET COVER
62NIGHTCAP™
59AIRFRAME™
65
STUFF + THINGS
CRYE PRECISION™ OFFICIAL GEAR
66 MAJOR LEAGUE INFIDEL™ OFFICIAL GEAR
APPAREL
1
CRYE PRECISION 2014 PRODUCT GUIDE
G3 COMBAT PANT
™
FEATURES
1.
Dedicated knife/light holder that still allows pocket access
2.
Simple kneepad height adjuster located in front thigh pocket
3.
Designed for use with removable AIRFLEX™ COMBAT KNEE PADS
4.
Unique low-profile waist adjust system
5.
Each cargo pocket conceals water bottle/magazine stabilizer
6.
Built-in flap covers kneecap opening when not using knee pads
1
DESIGN
Designed as a no-compromise assault uniform, these pants are aggressively
cut for maximum mobility. These combat-proven pants are sized in 2” waist
increments and multiple lengths for a perfect fit. Features a unique padded
waistband and hi-mobility stretch panels at the knee and lower back. 10
2
pockets. Designed for use with our patented removable AIRFLEX™ COMBAT
KNEE PADS
(sold separately). Base fabric is Mil-Spec 50/50 NYCO ripstop with
durable a 4-way stretch-woven accents. Zip fly with Velcro® closure. Unique
low-profile adjustable waist feature. Made in the US from US materials.
AVAILABLE SIZES
28–46 waist in short, regular, long, and extra long lengths.
AVAILABLE COLORS
3
PRODUCT SHOWN WITH
AIRFLEX™ COMBAT KNEE
PADS. (SOLD SEPARATELY)
BLACK
MULTICAM®
KHAKI
R. GREEN
1
2
3
4
4
5
5
PAT. WWW.LWPATENTS.COM
APPAREL
G3 COMBAT SHIRT
2
™
FEATURES
1
1.
Comfort placket behind zipper
2.
Eye-pro holder and pen pocket
3.
Double layer bicep pocket
4.
Flexible Velcro® configuration on bicep pocket
5.
Streamlined elbow pad configuration designed for use with our
removable AIRFLEX™ ELBOW PADS or our legacy FIELD ELBOW PADS
(sold separately)
DESIGN
The design that started a movement. The G3 COMBAT SHIRT™ is a combatspecific garment specifically designed to be worn under body armor. It
keeps you cool with wicking, lightweight, high-performance, flame-resistant
DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves.
Designed for use with our removable AIRFLEX™ ELBOW PADS or our legacy
FIELD ELBOW PADS
(sold separately). The G3 COMBAT SHIRT™ features a zip
collar that allows easy donning and doffing while keeping slings, straps, and
brass off your neck. Made in the US from US materials.
AVAILABLE SIZES
XS–3X in short, regular, long, and extra long lengths.
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
1
R. GREEN
2
2
3
G3 ALL WEATHER COMBAT PANT
™
FEATURES
1.
2.
3.
4.
Unique low-profile waist adjust system
5.
1
DESIGN
Our G3 ALL WEATHER COMBAT PANT™ are based on the same no-compromise
design of our G3 COMBAT PANT™ but built from a 4-way stretch woven fabric
treated with Nano STX™ for extreme weather resistance. These combatproven pants are sized in 2” waist increments and multiple lengths for a
perfect fit. Features the same 10-pocket design as our G3 COMBAT PANT™.
2
Designed for use with our patented removable AIRFLEX™ COMBAT KNEE PADS
(sold separately). Zip fly with Velcro closure. Unique low-profile adjustable
®
waist feature. Made in the US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
3
PRODUCT SHOWN WITH
BLACK
MULTICAM
®
KHAKI
R. GREEN
1
2
3
4
4
5
5
APPAREL
G3 ALL WEATHER COMBAT SHIRT
4
™
FEATURES

Comfort placket behind zipper

Eye-pro holder and pen pocket

Midweight wicking FR torso

Extreme weather resistant 4-way stretch laminate sleeves

Soft lined collar and zipper placket for added comfort 
Flexible Velcro® configuration on bicep pocket 
Streamlined elbow pad configuration designed for our AIRFLEX™ ELBOW PADS

Water-shedding bicep pocket opening
DESIGN
The G3 ALL WEATHER COMBAT SHIRT™ is based on the same no-compromise
design of our G3 COMBAT SHIRT™ but built from a 4-way stretch woven
laminate treated on the exterior with Nano STX™ for extreme weather
resistance. The new G3 ALL WEATHER COMBAT SHIRT™ is designed to offer
the versatility of our proprietary COMBAT SHIRT™ architecture combined with
the moisture and temperature management features needed when operating
across a wider temperature range. Made in the US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
R. GREEN
5
G3 FIELD PANT
™
FEATURES
1.
2.
3.
Large front thigh pockets
4.
Designed for use with our removable AIRFLEX™ FIELD KNEE PADS
5.
Extended zip fly
6.
No-snag button closure
1
DESIGN
The G3 FIELD PANT™ are sized with 2” waist increments for perfect fit without
bulky hardware. Ten pockets located for easy access in the same configuration as the G3 COMBAT PANT™. Shaped knees are reinforced and accept our
AIRFLEX™ FIELD KNEE PADS.
Fabric is Mil-Spec 50/50 NYCO ripstop. Made in
the US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
1
R. GREEN
2
2
APPAREL
G3 FIELD SHIRT
6
™
FEATURES
1.
Double-layer bicep pocket with eye-pro holder and pen pocket
2.
Flexible Velcro® configuration on bicep pockets
3.
Designed for use with our removable AIRFLEX™ ELBOW PADS or our legacy
4.
New dual-access NoProfile™ chest pocket design
FIELD ELBOW PADS
(sold separately)
DESIGN
This G3 FIELD SHIRT™ is a traditionally tailored, general utility shirt featuring
NoProfile™ dual-entry chest pockets (top and side) for easier access while
wearing body armor, a pen pocket on the left arm, and slanted, dual layer
1
bicep pockets with segmented Velcro® panels for reduced bulk. The bicep
pockets feature an eye-pro holder. Shaped elbows are reinforced and accept
our removable FIELD ELBOW PADS (sold separately). Fabric is Mil-Spec 50/50
NYCO ripstop. Made in the US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
1
R. GREEN
7
G3 ALL WEATHER FIELD PANT
™
FEATURES
1.
2.
3.
4.
4-way stretch weather resistant fabric
5.
Designed for use with removable AIRFLEX™ FIELD KNEE PADS
6.
Large front thigh pockets
7.
Double-seated rear
(sold separately)
1
DESIGN
Our G3 ALL WEATHER FIELD PANT™ are based on the same no-compromise
design of our G3 FIELD PANT™ but built from a 4-way stretch woven fabric
2
treated with Nano STX™ for extreme weather resistance. These combatproven pants are sized in 2” waist increments and multiple lengths for a
perfect fit. Features the same 10-pocket design as our G3 FIELD PANT™.
Designed for use with our AIRFLEX™ FIELD KNEE PADS (sold separately). Zip fly
with Velcro® closure. Unique low-profile adjustable waist feature. Made in the
US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
1
R. GREEN
2
5
3
APPAREL
8
COMING SPRING 2014
COMBAT PANT LE01
™
FEATURES
1.
Large front thigh pockets accessible in vehicles
2.
3.
Articulated leg for added mobility
4.
Sharp, uncluttered appearance
DESIGN
Offering both extreme tactical functionality and a refined appearance,
the new COMBAT PANT LE01™ strikes an ideal balance of professional
image and utility while also being more economical than our full-featured
1
COMBAT PANT™.
Ideal for LE units that want increased functionality, but who need to
maintain a more traditional uniform appearance. Flush, simple pocket details
and refined tailoring make the COMBAT PANT LE01™ blend well into a duty
uniform profile. Made in the US from US materials.
AVAILABLE SIZES
AVAILABLE COLORS
2
PRODUCT SHOWN WITH
BLACK
MULTICAM®
KHAKI
R. GREEN
1
2
9
COMING SUMMER 2014
FIELDSUIT
™
FEATURES
1.
Uses our patent-pending mobility zipper design
2.
Internal waist adjuster
3.
Zipper closure cargo pockets
4.
Reinforced knee accepts our AIRFLEX™ FIELD KNEEPADS
5.
Articulated leg for added mobility
6.
Reinforced seat
7.
Flush chest pockets for use with body armor
1
DESIGN
Utilizing a new patent-pending design, we have solved the age-old sizing
dilemma of one-piece garments. Traditional one-piece garments either gave
you a wedgie when in prone or they had a very low crotch that interfered with
normal mobility. In fact they usually did both. We have solved this problem
by designing a novel entry system that allows the entire front and back of
the garment to stretch as needed. The FIELDSUIT™ fits like a shirt and pants
no matter how you move. No more wedgies, instead a highly fit and mobile
2
garment for use when the simplicity and convenience of a one-piece suit
is desired. Made from lightweight Flame Resistance (FR) woven fabric that
meets the US Army’s FRACU spec and offers durability far superior to most
other FR fabrics. Made in the US from US materials.
AVAILABLE SIZES
32–52 chest (in 2" increments) in short, regular, long, and extra long.
AVAILABLE COLORS
4
BLACK
MULTICAM® R. GREEN
1
2
3
3
APPAREL
10
COMING SUMMER 2014
COMBATSUIT
™
FEATURES
1
1.
Uses our patented-pending mobility zipper design
2.
Internal waist adjuster
3.
Reinforced knee accepts our AIRFLEX™ COMBAT KNEEPADS
4.
Zipper closure cargo pockets
5.
Patented COMBAT SHIRT™ format for use with body armor
6.
Stress relief crotch gusseting
7.
Stretch knee panels for added mobility
8.
Reinforced seat
DESIGN
Similar in functionality to our FIELDSUIT™, the COMBATSUIT™ utilizes our
new patent-pending design to solve the age-old sizing dilemma of one-piece
garments. Traditional one-piece garments either gave you a wedgie when in
prone or they had a very low crotch that interfered with normal mobility. We
2
have solved this problem by designing a novel entry system that allows the
entire front and back of the garment to stretch as needed. The COMBATSUIT™
fits like a shirt and pants no matter how you move. No more wedgies, instead
a highly fit and mobile garment for use when the simplicity and convenience
of a one-piece suit is desired while wearing body armor. Fabrics meet the US
Army’s FRACU spec for flame resistance and offer durability far superior to
most other FR fabrics. Made in the US from US materials.
AVAILABLE SIZES
32—52 chest (in 2" increments) in short, regular, long, and extra long.
3
AVAILABLE COLORS
BLACK
4
MULTICAM® R. GREEN
1
2
3
4
11
COMING SPRING 2014
LWF JACKET
™
FEATURES
1.Zip
closure hand pockets
2.Interior
chest pocket
3.Integrated
4.Hem
thumb loops
draw cord
5.Breathable
6.Tailored
mid-weight stretch fleece material
for extreme mobility without binding
DESIGN
A versatile layer that works well as a standalone jacket or as breathable
insulation under a shell. Comfortable in a wide temperate range. Made from
a single layer of a custom fleece fabric with a “slick” outer surface that
sheds water and dirt better than typical fleece. This fabric is so quiet and
stretchy you almost forget you’re wearing it. Sharp tailored lines give this
jacket a clean and distinct appearance. Athletic fit for layering under other
garments, if you prefer a loose fit, choose one size larger. Made in the US
from US materials.
AVAILABLE SIZES
(ATHLETIC FIT)
XS–3X
AVAILABLE COLORS
1
BLACK
MULTICAM® R. GREEN
1
2
4
3
4
3
APPAREL
12
COMING SPRING 2014
LOFT JACKET
™
FEATURES
1.Helmet-sized
2.Jacket
3.2
single layer hood stows in collar
stows into built-in pocket forming a handy pillow
exterior zip pockets and 3 large interior zip pockets
4.Stretch
cuffs with integrated thumb loops
5.Breathable
6.Tailored
7. Nano
stretch fleece side panels
for extreme mobility without binding
STX™ treatment sheds rain and snow
8. ClimaShield®
insulation for extreme performance and packability
DESIGN
A great balance between an outer garment and an insulation layer. Our LOFT
JACKET™
offers the right amount of functionality to be an ideal solution for
most cold days and nights while remaining light and minimal enough to
be worn comfortably under nearly any shell (such as our FIELDSHELL™) as
conditions worsen. The outer fabric is Nano STX™ treated to shed water and
snow. Midweight ClimaShield® insulation is for versatility and packability.
The fit is athletic for wear under shells, if you prefer a loose fit, choose one
size larger. Made in the US from US materials.
AVAILABLE SIZES
(ATHLETIC FIT)
XS–3X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
4
1
2
3
4
1
13
COMING SPRING 2014
FIELDSHELL 2
™
FEATURES
1.
Soft-lined collar and zipper placket for added comfort
2.
Low-profile bicep pockets
3.
Inner stretch cuff baffles keep the wind out
4.
Extra-long armor-friendly pit zips
5.
Patterned for extreme mobility without binding
6.
Base fabric is an extremely weather resistant and lightweight 4-way
7.
Versatile intermediate body length
8.
Drawcord hem with hidden hardware
1
stretch Nano STX™ laminate with wicking knit interior face
2
DESIGN
The FIELDSHELL™ 2 is an update of our original FIELDSHELL™ design. It’s a
versatile and refined soft shell jacket that offers significant utility in almost
any weather. Our lightweight 4-way stretch laminate with Nano STX™
creates a highly breathable and extremely wind/rain resistant outer garment.
Packability, clean lines, and refined features are the hallmarks of this
garment. From the hidden hem adjuster to the discreet zip mesh pockets that
double as internal storage, this design remains uncluttered while still being
multifunctional. Unique, armor-friendly extra-long pit zips allow easier access
and more ventilation than traditional vents when wearing armor. Made in the
NOTE:
The FIELD SHELL™ 2 has a more athletic fit than the original
FIELDSHELL™
so if you prefer a loose fit or want the same fit as the original
FIELDSHELL™,
go with one size larger.
AVAILABLE SIZES
(ATHLETIC FIT)
XS–3X
AVAILABLE COLORS
3
BLACK
MULTICAM® R. GREEN
1
2
3
4
4
APPAREL
WINDLINER
14
™
FEATURES
1.
Folds and stores into single mesh-lined cargo pocket on sleeve
2.
Stirrup thumb cuffs
3.
Stowable hood
4.
Featherweight, high-performance Nano STX™ treated fabric
5.
Elastic-bound hem
6.
Soft-lined collar and zipper placket for added comfort
DESIGN
1
Extremely light and packable jacket that offers outstanding wind and
weather resistance in a handy featherweight package. The WINDLINER™
folds into its own single mesh-lined cargo pocket. Perfect for packing light
and being prepared for unpredictable weather conditions. Made in the US
from US materials.
AVAILABLE SIZES
SM–3X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
1
2
2
15
HALFJAK INSULATED
™
FEATURES
1.
Zip-up front for quick and easy donning and doffing
2.
Can be stuffed into internal pocket to create a pillow
3.
Can be stowed and mounted to vest as a hand warmer
4.
Packs into stuff sack that mounts via MOLLE, belt, or Velcro®
5.
Various mounting options via Velcro® tab or webbing loops
6.
Nano STX™ treatment sheds rain and snow
DESIGN
The HALFJAK™ is a new minimalist concept in combat-specific weather
protection. It helps you stay warm and dry while avoiding overheating
during movement. No need to stop and remove kit to layer up or down. No
interference with your gear and no delays while you’re on the move. Instantly
transition back and forth between highly-aerobic and stationary activities
without getting sweaty or cold.
The HALFJAK™ INSULATED version is our take on combat-specific cold/wet
gear. Made with ClimaShield™ loft material, it is extremely light, packable,
and warm. The exterior fabric is treated with a Nano STX™ finish that keeps
the water out. Made in the US from US materials.
AVAILABLE SIZES
SM–2X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
1
2
3
4
5
APPAREL
COMPACT ASSAULT GHILLIE
16
™
FEATURES
2
1.
Packs into baseball-sized pouch for compact stowage
2.
Laser-cut 3D shapes
3.
Removable dual-layer cape
DESIGN
Snipers aren’t the only people on the battlefield who benefit from
concealment. The COMPACT ASSAULT GHILLIE™ is a lightweight, low-bulk
concept in assaulter concealment. It's light and small enough to carry with
you or wear full-time. Laser-cut 3D shapes physically break up the most
visible human outline—the head and shoulders. Removable rear dual-layer
panel folds forward to conceal a long gun or binoculars. The open cut and
featherweight materials allow massive airflow and prevent overheating. Stuff
sack mounts to MOLLE or a belt. Made in the US from US materials.
AVAILABLE SIZES
MD–2X
AVAILABLE COLOR
MULTICAM®
1
2
17
SKULLCAP
™
FEATURES
1.
Eyelets for eye protection
2.
Polyester/Spandex blend printed fleece
3.
Dual-layer earband for additional warmth
DESIGN
The SKULLCAP™ is a fitted, 3-panel cap, cut for maximum coverage and
situational awareness. It keeps your ears warm and doesn’t block your
2
peripheral vision. Made from a custom fabric that allows MultiCam® to be
printed directly onto the fleece, this mid-weight polyester/Spandex blend
retains warmth while stretching to comfortably fit most heads. Light enough
to fit under a helmet, but warm enough to be worn alone. Made in the US
from US materials.
1
AVAILABLE SIZES
One size fits all.
AVAILABLE COLORS
BLACK
MULTICAM®
3
1
APPAREL
18
AIRFLEX PADS
™
AIRFLEX™ COMBAT KNEE PADS
The AirFlex™ Series represents the latest embodiment of our patented
COMBAT KNEE PAD™
design. Designed for compatibility with our uniforms and
armor, the AIRFLEX™ COMBAT KNEE PAD features a flexible cap for complete
AIRFLEX™ COMBAT KNEE PADS
freedom of movement. AirFlex™ Series pads are compatible with all current
and legacy apparel that accept our joint protection pads. AirFlex™ pads are
so comfortable, light, and flexible you almost forget you are wearing them.
Sold as a pair. Available in three colors. Made in the US from US materials.
AIRFLEX™ ELBOW PADS
Lightweight, flexible, and vented elbow pads are compatible with all Crye
Precision FIELD SHIRTS™ and G3 COMBAT SHIRTS™. Only available in black.
Sold as a pair. Made in the US from US materials.
AIRFLEX™ FIELD KNEE PADS
Lightweight, flexible, and vented knee pads are compatible with all of our
FIELD PANT™.
Only available in black. Sold as a pair. Made in the US from
US materials.
AVAILABLE SIZES
One size fits all.
AVAILABLE COLORS
(SEE DESCRIPTION)
AIRFLEX™ ELBOW PADS
BLACK
KHAKI
R. GREEN
AIRFLEX™ FIELD KNEE PADS
ARMOR + EQUIPMENT
21
COMING FALL 2014
HITCOAT
™
FEATURES
1.Neck,
2.NIJ
trap, shoulder, bicep, and forearm protection
IIIA compliant armor
3.Stretch
4.Zip
5.Full
panels for extreme mobility
front for rapid and simple don/doff
zip sleeves for rapid don/doff
6.Ventilation
throughout
7.Projects
a distinct authoritative presence
8.Provides
new opportunities for role-specific armor profiles
DESIGN
We’re very proud to introduce the HITCOAT™ an armor system that takes
things to the next level. Designed to offer dramatically more ballistic
coverage than traditional vests, the HITCOAT™ provides officers conducting
high risk operations significantly more protection without compromising their
agility and mobility. Quick and easy don/doff greatly simplifies gearing up
for a hit. Built with our proprietary construction technique, all the ballistic
panels are shaped to mold around the wearer's body. This makes the system
feel and move like a natural extension of the body. The patent-pending
HITCOAT™
is comprised of 2 main components: the HITCOAT VEST™ and the
HITCOAT SLEEVES™.
The vest can be separated and worn alone. Made in the
AVAILABLE SIZES
SM–3X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
1
STRETCH PANELS
FRONT ZIPPER
3
SLEEVE ZIPPERS
2
ARMOR + EQUIPMENT
22
COMING FALL 2014
HITCOAT VEST
™ FEATURES

NIJ IIIA compliant armor

Zip front for rapid and simple don/doff

Stretch panels for extreme mobility

Low-profile adjustment features

Fits very wide size range

Adjustment system provides feel of custom fit
DESIGN
The unique don/doff system of the HITCOAT VEST™ makes gearing up fast and
simple. It accepts nearly any matched size rifle plate set. Integrated side
pockets can hold side plates or extra magazines. The novel adjustment system
provides the feel and stability of a custom fit while still accommodating a
very wide size range. Clean low-profile shoulder adjustment features provide a
sharp visual silhouette. The HITCOAT VEST™ is the vest portion of the HITCOAT™
offered as a standalone product. Made in the US from US materials.
AVAILABLE SIZES
SM–3X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
23
COMING FALL 2014
HITCOAT SLEEVES
™ FEATURES

Neck, trap, shoulder, bicep, and forearm coverage

NIJ IIIA compliant armor

Attaches to nearly any protective tactical vest

Stretch panels for extreme mobility

Full zip sleeves for rapid don/doff

Ventilation throughout

Projects a distinct authoritative presence

Provides new opportunities for role-specific armor profiles
DESIGN
HITCOAT SLEEVES™
is the sleeve portion of the HITCOAT™ offered as a
standalone product. The HITCOAT SLEEVES™ can be integrated with the
HITCOAT VEST™
SLEEVES™
or nearly any other tactical protective vest. The HITCOAT
provide new options for role-specific protection. Teams working in
high risk operational environments now have the option to rapidly adjust their
armor to the threat. The HITCOAT SLEEVES™ come with an attachment kit that
provides for connection to other vests via MOLLE webbing or Velcro®. In the
same way teams employ shields as needed they can now apply expanded
personal ballistic coverage when dealing with unique roles or scenarios.
The HITCOAT SLEEVES™ are the top portion of the HITCOAT™ offered as a
standalone product. Made in the US from US materials.
AVAILABLE SIZES
SM–3X
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
ARMOR + EQUIPMENT
24
NEW
LOW PROFILE CHEST RIG
FEATURES

Dual-layer SKELETAL™ CUMMERBUND

Zip front for easy don/doff

Holds gear close to body for concealment under an outer garment
DESIGN
The LOW PROFILE CHEST RIG is a simple method for carrying gear close to
the body. Intended for use under an outer garment. Our patent-pending
dual-layer SKELETAL™ CUMMERBUND allows items to be mounted on the
inside face and held tightly against the body. Stretch back allows for chest
expansion while still keeping gear held tight. Zip front for easy don/doff.
Made in the US from US materials.
AVAILABLE SIZE
One size fits all.
AVAILABLE COLORS
BLACK
MULTICAM® R. GREEN
25
ADAPTIVE VEST SYSTEM (AVS)
™
FEATURES

Highly configurable to meet mission needs

Easily customizable to suit user preferences

Continually expanding catalog of components

Custom lightweight hardware
DESIGN
The AVS™ is a revolutionary system that quickly configures as anything from a
low-vis rig to a fully armored load-bearing vest… and everything in between.
Changing calibers? Simply switch out your front mag panel. Switching
load-outs? Quickly slide off your modular pouches without unweaving them.
Shifting threats? Just add or remove armor panels without having to modify
your gear load-out. Varying missions? Configure it as a load-bearing vest for
recce work and switch right back to a fully-armored configuration with ease.
Attach packs, zip-on rear panels, STKSS™ LOAD SUPPORTS, and many other
accessories—the options are infinite. Made the in US from US materials.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
BLACK
MULTICAM®
COYOTE
R. GREEN
ASSAULT CONFIGURATION
HARNESS (1) + STANDARD PLATEBAGS
(2) + 3-BAND CUMMERBUND (5) +
FRONT MAG PANEL (10) + 6”×6” BALLISTIC POUCH (7) + MBITR POUCH (4)
FAST AND FLEXIBLE
The Quick-Mount™ pouch attachment system on the AVS™ Harness allows
pouches over two webbing rows high to be easily slid onto to the dual-layer
cummerbunds (inner or outer) without having to be woven through any other
webbing. This feature also makes it extremely quick and easy to add or
remove armor panels—without having to modify your gear load out.
BASE CONFIGURATION
HARNESS (1) + STANDARD
PLATEBAGS (2)
ARMOR + EQUIPMENT
26
AVS SYSTEM COMPONENTS
™
HARNESS
STANDARD PLATEBAGS
DETACHABLE CHEST RIG
MBITR POUCH
3-BAND CUMMERBUND
2-BAND CUMMERBUND
6"×6” BALLISTIC POUCH
6"×9” BALLISTIC POUCH
DETACHABLE FLAP, MOLLE
DETACHABLE FLAP, M4
DETACHABLE FLAP, 7.62
DETACHABLE FLAP, M4 FLAT
CUSTOMIZATION KIT
PAD SET
StKSS™
SHOULDER PAD
27
NEW
AVS DETACHABLE CHEST RIG
™
FEATURES
1.
Holds virtually any size ballistic plate, with stowable top flap
2.
Front opening zipper
3.
Four front pouches can hold two 5.56 mags, one 7.62, or one MBITR
4.
Side pouches hold side plates and MBITR
5.
Two integrated pistol holders
DESIGN
The AVS™ DETACHABLE CHEST RIG is a multi-purpose chest rig capable of
being used with various components of the AVS™ system. This unique
system allows the user to be able to carry a variety of components
comfortably to include a ballistic plate. The AVS™ chest rig system also
features a front opening zipper, which allows for easy don and doff of the
system when fully loaded. Made in the US from US materials.
AVAILABLE SIZE
One size fits all.
AVAILABLE COLORS
BLACK
MULTICAM®
KHAKI
R. GREEN
PISTOL HOLDER
WITH SIDE PLATE
WITH MBITR RADIO
STOWABLE FRONT PANEL
ARMOR + EQUIPMENT
AVS PADDED YOKE
™
FEATURES

Padded for long wearing comfort

Balanced geometry distributes weight evenly on the body

Versatile mounting points allow it to be used on many systems
DESIGN
Our AVS™ PADDED YOKE allows you to turn the AVS™ CHEST RIG into a
standalone chest rig. The yoke can also be used in conjunction with any
of our AVS™ PLATE BAGS to form a modular vest with a padded neck and
shoulder area. It can also be used as a comfortable load-bearing means of
adding support for any of our belts. Made in the US from US materials.
AVAILABLE SIZES
One size fits all.
AVAILABLE COLORS
BLACK
MULTICAM®
COYOTE
R. GREEN
ATTACHED TO AVS™ PLATEBAG
(FRONT)
ATTACHED TO AVS™ PLATEBAG
(BACK)
ATTACHED TO AVS™ CHEST RIG
(FRONT)
ATTACHED TO AVS™ CHEST RIG
(BACK)
28
29
AIRLITE PLATE CARRIERS
™
FEATURES

Ultra minimal, ideal for low-vis applications

Comfortable stretch closure

Easily adjustable

Drains water immediately

Attachment loops for AIRLITE™ CHEST RIG on front

Includes optional camo plate covers
DESIGN
AIRLITE™ PLATE CARRIERS
are the lightest MOLLE-compatible plate carriers in
the world. Although they're ridiculously light, they're still extremely durable
and strong.
EK01™
We are proud to offer the EK01™ as the definition of the extreme end of the
lightweight spectrum. Minimal weight, minimal bulk, minimal complexity.
AirLite™ is the original and best ultra-light carrier system.
EK02™
The EK02™ shares the same base design as our ultralight EK01™ with the
addition of two integrated 6" wide side plate pockets.
EK03™
The EK03™ supports swimmer-cut plates, as opposed to SAPI-cut plates of
the EK01™. The base design, however, remains the same.
EK01™
EK04™
The EK04™ shares the same base design as our ultralight EK03™ with the
addition of two integrated 6" wide side plate pockets.
AVAILABLE SIZES
SM–XL
AVAILABLE COLOR
MULTICAM®
AIRLITE™ VS. TRADITIONAL MOLLE
EK02™
ARMOR + EQUIPMENT
30
AIRLITE CHEST RIG
™
FEATURES

Featherlight, weighing only 4 oz.

Ultra low profile

Easily adjustable

Fits all AirLite™ plate carriers as well as others including the LV-MBAV and
LV-RBAV
DESIGN
The AIRLITE™ CHEST RIG is made with the same revolutionary material used
in all our AirLite™ plate carriers and accessories. This means you get the
least weight with the maximum durability and strength. The AIRLITE™ CHEST
RIG
integrates seamlessly into all our AirLite™ carriers and is also compatible
with our other plate carriers such as the LV-MBAV and LV-RBAV. Made in the
AVAILABLE SIZE
One size fits all.
AVAILABLE COLOR
MULTICAM®
AIRLITE™ CHEST RIG ATTACHED TO
PLATE CARRIER
31
JUMPABLE PLATE CARRIER (JPC)
™
FEATURES
1.
Integrated triple mag pouch on front of carrier
2.
Low-profile cummerbund attachment that provides maximum adjustability
3.
Built-in admin pouch in upper portion of front carrier (holds pistol mags,
4.
High performance stretch material that allows for different thickness of plates
5.
Padded ventilation on interior panels of vest for added comfort
6.
Quick-attach side loops for add-on coverage
and allows for chest expansion
chem lights, maps, etc.)
7.
Durable anti-slip shoulder straps
8.
Groin protection attachment point
9.
Single strap side closure option for ultra-lightweight configurations
DESIGN
The JUMPABLE PLATE CARRIER™ (JPC) is a lightweight and minimal vest
designed for maximum mobility, weight savings, and packability. At just over
1
one pound for the entire carrier, the JPC™ offers a variety of configuration
options to suit an operator’s needs in terms of load carriage and comfort.
It features our SKELETAL™ CUMMERBUND SYSTEM with our patent-pending
integrated attachment system that allows pouches to be mounted on both
the inside and outside of the cummerbund, shedding unnecessary weight
and bulk while improving ventilation. It also features integrated admin and
magazine pouches on the front of the carrier. Sizes are based on the size of
the ballistic plate. For example, a large plate will fit best in a large JPC™.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
MULTICAM®
COYOTE
R. GREEN
1
2
2
ARMOR + EQUIPMENT
32
CAGE PLATE CARRIER (CPC)
™
FEATURES

Lightweight (3–5 lbs. depending on size) 
Accepts optional side armor inserts

Integrated mag, radio, and admin pouches

All parts are interchangeable with CAGE ARMOR CHASSIS™ components
DESIGN
The CAGE PLATE CARRIER (CPC)™ offers unsurpassed comfort and load support
in a low profile plate carrier configuration. It is releasable and accepts soft
and hard armor inserts (sold separately). When paired with the LOW PROFILE
BLAST BELT™,
it becomes an extremely efficient and versatile armor and
load carriage system. Designed from the ground up to take full advantage
of our revolutionary StKSS™ system that transfers the vest weight to the
wearer's hips. The CPC™ built-in cummerbund is designed to accept our soft
armor panels and 6”x6” plates. CPC™ plate bags (sold separately) stretch to
accommodate different plate thicknesses and have integrated magazine and
admin pouches. Made in the US from US materials.
AVAILABLE SIZES
SM–XL. Plate bags are sized independently and must be ordered
independently of the rest of the carrier.
AVAILABLE COLORS
MULTICAM®
COYOTE
R. GREEN
33
CAGE ARMOR CHASSIS
™
FEATURES


Dual emergency doff
Accepts 6"x6" side plates and shoulder strap plates

Front opening access

Uninterrupted side coverage (no side seam)

Meets or exceeds IBA & USASOC frag and handgun requirements
DESIGN
CAGE (CRYE ASSAULT GEAR) ARMOR CHASSIS™:
Unlike any other armor vest,
the CAGE ARMOR CHASSIS™ is the result of years of design and engineering.
Made by an entirely new production process, the articulated chassis provides
the most comfortable and stable armor/load-carriage platform to date. The
design provides passive cooling via large air channels that run under the
armor. Designed for use with our armored HIGH BACK BLAST BELT™, the CAGE
ARMOR CHASSIS™
is fully modular and highly adjustable. Designed to be worn
snug to the body like sports equipment. Features include: dual emergency
doff, accepts 6"x6" side plates and shoulder strap plates, front opening
access, uninterrupted side coverage (no side seam), meets or exceeds IBA &
USASOC frag and handgun requirements. Made in the US from US materials.
AVAILABLE SIZES
SM–XL. Plate bags are sized independently and must be ordered
independently of the rest of the carrier.
AVAILABLE COLORS
MULTICAM®
COYOTE
R. GREEN
ARMOR + EQUIPMENT
34
ZIP-ON PANELS
MOLLE ZIP-ON PANEL
A quick attach/detach system to set up dedicated load-outs. Zips to rear
platebag. Rig up a few different panels for different types of work and switch
quickly between them. Features a built-in hydration/bolt cutter pocket.
Corresponds with platebag sizing. Compatible with CHASSIS™, CPC™, and AVS™.
POUCH ZIP-ON PANEL
A dedicated pouch panel that zips to rear plate. Holds multiple 37/40mm
grenades/bangs across the top, a GP pouch in the middle, and MOLLE
webbing on the bottom. Use multiple panels for different types of work and
switch quickly between them. Features a built-in hydration/bolt cutter pocket.
Corresponds with platebag sizing. Compatible with CHASSIS™, CPC™, and AVS™.
PACK ZIP-ON PANEL
Simple, versatile pack that zips to rear plate and stretches to hold essential
supplies. Several handy internal and external pockets. Streamlined design is
not too big and not too small. Features a built-in expandable hydration/bolt
cutter pocket. Corresponds with platebag sizing. Compatible with CHASSIS™,
CPC™,
and AVS™.
MOLLE ZIP-ON PANEL
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
MULTICAM®
POUCH ZIP-ON PANEL
PACK ZIP-ON PANEL
COYOTE
R. GREEN
35
LV-RBAV
™
DESIGN
USSOCOM’s official issue LV-RBAV™, this carrier accepts SPEAR RBAV
soft inserts and offers a full coverage, streamlined vest for low-visibility
applications. Both shoulder and cummerbund are internally adjusted
providing an ultra-slick external surface. Includes internal support for 6”x6”
side plates. Combine with our detachable chest rig for less covert use.
Includes elastic internal and external cummerbunds. Compatible with most
standard plates. Cummerbund with integrated radio/mag carrier available.
Detachable chest rig available separately. Made in the US from US materials.
AVAILABLE SIZES
SM–XL and LG–XL LONG
AVAILABLE COLORS
MULTICAM®
KHAKI
R. GREEN
COMPATIBLE WITH DETACHABLE
DETACHABLE CHEST RIG SHOWN
CHEST RIG
INSTALLED
ARMOR + EQUIPMENT
LV-MBAV
36
™
DESIGN
Adopted by USSOCOM and designated LV-MBAV, this carrier accepts MBAV
soft inserts and provides a lightweight streamlined system for low-visibility
applications. Combine with our detachable chest rig for less covert use.
Includes elastic cummerbund and single option. Low profile adjustable
shoulder with cable sleeve. Compatible with most standard plates. Compatible
with our SKELETAL™ CUMMERBUND. Side armor carrier available. Detachable
chest rig available. Made in the US from US materials.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
MULTICAM®
KHAKI
R. GREEN
COMPATIBLE WITH DETACHABLE
DETACHABLE CHEST RIG SHOWN
CHEST RIG
INSTALLED
RADIO/MAG POUCH + SIDE PLATE
CUMMERBUND
37
MODULAR RIGGER'S BELT (MRB)
™
FEATURES
1.
MOLLE sleeve has opening for drop-leg holster integration
2.
Inner LoopLock™ belt functions on its own as a great low profile pants
3.
Multiple pistol mounting options (on inner LoopLock™ layer, on exterior
4.
Main belt can be replaced with alternate load-rated rigger's belts.
5.
Ergonomically-shaped for long wearing comfort
6.
Extremely light and low bulk
belt (no bulky hardware)
MOLLE sleeve, and on main belt)
DESIGN
Our MODULAR RIGGER'S BELT (MRB)™ is a single, lightweight belt system that
carries your gear and holds up your pants. Features our new LoopLock™
inner belt layer that passes through pants belt loops, keeping the MRB™
oriented and stable. Made in the US from US materials.
There are two main ways to configure the system to suit any operational need:
1.
Keep the inner LoopLock™ layer attached to belt for most secure
and stable setup.
2. Wear
inner LoopLock™ layer as a separate low-profile pants belt
for added versatility.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
BLACK
MULTICAM®
COYOTE
1
R. GREEN
2
ARMOR + EQUIPMENT
38
AVS LOW PROFILE BELT
™
FEATURES


Dual adjust locking buckle
Built-in StKSS™ compatible pockets

Drop leg holster slots

Elastic stow loops
DESIGN
Offers the same lumbar support and stable load carriage platform as our
ballistic (BLAST™) belts, but with a non-ballistic insert. Designed to work in
combination with the AVS™. It can also integrate seamlessly with our AVS™
StKSS™ LOAD SYSTEM.
Non-ballistic. Made in the US from US materials.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
BLACK
MULTICAM®
COYOTE
R. GREEN
39
BLAST HIGH BACK BELT
™
DESIGN
Combining the benefits of lower back support with flexible armor protection,
the BLAST HIGH BACK BELT™ is an extremely stable and comfortable load
carriage platform. It allows you to carry holsters, pouches, and thigh rigs
securely and comfortably. It is designed to work in combination with the CAGE
ARMOR CHASSIS™
or other operator-cut vests. Accepts rifle protective upgrade
plates. Meets or exceeds IBA & USASOC frag and handgun requirements.
The BLAST HIGH BACK BELT™ is compatible with CRYE PRECISION™ SUSPENDERS
and SIDE SLEEVES.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
MULTICAM®
COYOTE
R. GREEN
PHOTOS SHOWN WITH OPTIONAL SIDE SLEEVES (SOLD SEPARATELY)
ARMOR + EQUIPMENT
BLAST LOW PROFILE BELT
40
™
DESIGN
Similar to the original BLAST HIGH BACK BELT™, but cut in a lower profile,
the BLAST LOW PROFILE BELT™ is also an extremely stable and comfortable
load carriage platform. It is designed to work in combination with almost
any armor vest. This belt is designed to integrate seamlessly with STKSS™,
our revolutionary load support system that transfers vest-borne weight to
the hips. Removable soft armor insert exceeds IBA and USASOC frag and
handgun requirements. Also accepts our rifle protective upgrade plates. Made
in the US from US materials.
The BLAST LOW PROFILE BELT™ is compatible with CRYE PRECISION™
SUSPENDERS.
AVAILABLE SIZES
SM–XL
AVAILABLE COLORS
MULTICAM®
PHOTOS SHOWN WITH OPTIONAL SIDE SLEEVES (SOLD SEPARATELY)
COYOTE
R. GREEN
41
StKSS
™
FEATURES

Extremely simple and lightweight

Highly flexible and easy to use

Very little impact on range of motion

Does not limit vest's emergency-release capability

Available for all sizes of CPC™ and CHASSIS™

Kit includes two lengths for perfect fit
DESIGN
Nothing short of revolutionary, StKSS™ (STRUCTURAL KINETIC SUPPORT
SYSTEM)
allows a wearer to selectively transfer some or all of the weight of
their armor vest to their hips. StKSS™ allows the wearer’s shoulders and
spinal column to be completely isolated from the weight being carried.
Instead, the weight is transferred directly to the pelvis (hip bone) and legs.
The effect is unmistakable, and the benefit is undeniable to those familiar
with what wearing a >60 lbs. vest for months on end does to your lower back.
AVAILABLE COLORS
MULTICAM®
COYOTE
R. GREEN
StKSS™ INSTALLED ON
CPC™ AND BLAST LOW
PROFILE BELT™
ARMOR + EQUIPMENT
42
NEW
SMART POUCH SUITE
™
1. FRAG POUCH
Holds one frag grenade (or five shotgun shells with optional insert). Can be
mounted right side up or upside down.
2. 5.56-7.62, MBITR POUCH
Holds either a 5.56 magazine, 7.62 magazine, or one MBITR.
3. 152/BOTTLE POUCH
Holds a 152 or a water bottle.
4. GP POUCH 6x6x3
Holds either an individual medical kit, 5590 battery, PVS-15, five flashbangs,
or a 100-round SAW drum (or five 40mm grenades with optional insert).
4
Includes a SSE bag in front zipper pocket.
5. GP POUCH 9x7x3
Holds either 200-round SAW drum, six 5.56 magazines, a 54 oz. water
1
bladder, GPNVG (panos), or FGS (fusion goggles). Optional padded insert
available.
6. GP POUCH 11x6x4
Holds either four door-breaching charges or M53 protective mask. Optional
drop leg attachment available.
AVAILABLE COLORS
BLACK
2
5
3
6
MULTICAM®
COYOTE
R. GREEN
43
ARMOR COMPONENTS AND ACCESSORIES
1 CONTOURED GROIN PANEL™
3-dimensionally formed for increased
coverage. Unique attachment allows
weight to be carried by pants not vest.
Exceeds IBA and USASOC frag and
handgun requirements.
2 LOWER ABDOMEN PROTECTION™
(LAP) PANEL
Our LAP Panel™ adds more soft
armor coverage and load carriage
area. It also incorporates two
pockets for rifle protective upgrade
plates. It is compatible with most
military and commercial body
armor vests currently in use.
3 GROIN PROTECTION SYSTEM™
(GPS)
The GPS™ provides groin, peritoneal,
femoral, and lower back protection
1
2
3
4
5
6
without restricting mobility. Peritoneal
protection stores flat until needed.
Sizes XS–2X.
4 PLATE BACKING SOFT ARMOR
INSERT
Soft armor panel for use with
non-standalone plates. Exceeds
IBA and USASOC frag and handgun
requirements. Sizes SM–XL.
5 CAGE PLATE CARRIER™ SOFT
ARMOR INSERT (SIZE 1)
10.5"x6" soft armor panel for sides
of CPC™. Exceeds IBA and USASOC
frag and handgun requirements.
6 CAGE PLATE CARRIER™ SOFT
ARMOR INSERT (SIZE 2)
11.5"x6" soft armor panels for sides
of CPC™. Exceeds IBA and USASOC
frag and handgun requirements.
ARMOR + EQUIPMENT
44
7 6"x6" SOFT ARMOR PANEL
8 6"x9" SOFT ARMOR PANEL
9
BLAST™ LOW PROFILE BELT
SOFT ARMOR INSERT
Soft armor panel for BLAST™
Low Profile Belt. Exceeds IBA
and USASOC frag and handgun
requirements. Sizes SM–XL.
10 SIDE-PULL MAG POUCH
A perfect way to carry and access
two mags. Compatible with all of our
plate bags.
11 STRETCH MAG POUCH
A lightweight magazine holder that
7
8
lets you carry and reach two mags on
your side. Top or bottom pull. CPC™
compatible.
12 ROLL-UP DUMP POUCH
A lightweight roll-up dump pouch
that attaches onto the Velcro® of a
plate bag, vest, or belt.
9
10
11
12
ARMOR + EQUIPMENT
48
COMING WINTER 2014
SIX12
™
FEATURES
SIX12 12.5" BARREL

Compact and attachable to AR rail platforms

Removable 6-round cylindrical magazines

Accepts 12-gauge shells up to 3”

Interchangeable barrel feature

Double-action semiautomatic

Allows new options for force escalation

Ideal for breaching, home defense, and law enforcement uses
DESIGN
We are very pleased to introduce the SIX12™. Originally designed to provide
a safer, faster and more efficient means of breaching doors, the SIX12™ is a
6-round, 12-gauge, cylinder-fed shotgun that can be mounted to most AR
platforms. Its unique design puts the weight of the gun much closer to the
shooter making it much easier to carry and use. The SIX12™ is extremely
compact—critical when mounting it under an AR. Although the SIX12™ was
SIX12 18" BARREL
originally developed to improve breaching, its modular design and the ever
expanding variety of 12-gauge rounds make it ideal for many home defense
and law enforcement uses. Made in the US from US materials. US and foreign
patents pending.

The SIX12™ is offered as a standalone shoulder fired system that does
not require any NFA paperwork to purchase. This model comes with
everything needed to mount to an AR.

A shorter barrel, non-standalone model is available, which requires NFA

Individual shorter barrels are available for purchase as well.
taxes and paperwork.
NOTE: Depending on overall length, NFA barrel regulations may apply.
REMINDER
Obviously, firearms are inherently dangerous. Users are responsible for
complying with federal and local laws.
AVAILABLE ACCESSORIES
SIX12 WITH STOCK AND 22" BARREL

22” overall length barrel

18” overall length barrel

12.5” overall length barrel

Horizontal grip

Vertical grip

Color-coded cylinders

Standalone stock kit

Custom carrying case
AVAILABLE COLORS
BLACK
ARMOR + EQUIPMENT
GUNCLIP
52
™
FEATURES

Quickly opens by unsnapping the retention tab while reaching for handgun

Retention flap immediately releases and weapon can be instantly detached

Mount is compatible with all MOLLE platforms and belts up to 2” tall

Single adjustment sets rotation angle (360°)

Allows use of nearly any light, suppressor, and/or sight

Simple, one-handed operation to re-secure handgun
DESIGN
The GUNCLIP™: an entirely new approach to carrying and deploying a
handgun. Any light, any suppressor, any platform, any orientation, any
situation. Even if you’re in a cramped vehicle or wearing an armored vest
with a gun on your belt, the GUNCLIP™ allows you to deploy your handgun
and get on target fast. Its small size means minimal weight and space is
taken up when not in use.
A single adjustment sets rotation (360°) and securely clamps the mount
to almost any platform (belt or MOLLE). Fits belts up to 2” tall. Currently
available for all GLOCK 17, 19, 22, and 23 pistols. Right hand mount. Made
WITH LIGHT AND SUPPRESSOR
AVAILABLE COLORS
BLACK
TAN
ATTACHED TO MOLLE
ATTACHED TO BELT
ARMOR + EQUIPMENT
MAGCLIP
54
™
FEATURES
1.
Low-profile design mounts to MOLLE platforms and does not interfere
2.
Does not interfere with mag-well
3.
Belt mount capable
4.
Versatile design allows magazine to be easily concealed and/or clipped to
with other mags when nested
a wide variety of surfaces for quick and easy access
DESIGN
The MAGCLIP™ provides new options for carrying and using magazines. Ideal for
applications where low visibility, rapid access, or additional capacity is needed.
Clip the magazine to any horizontal edge and grab when needed. The
MAGCLIP™
attaches directly to the magazine and remains on the magazine—no
pouch necessary. Unique clip design allows many carry options: inside the
waistband, on a belt, on MOLLE webbing, clipped inside a pack or case, inside
a cummerbund, clipped to a vehicle door panel or under a seat.
While not intended to replace all magazine pouches, the MAGCLIP™ is great for
quick-access mags, adding mags wherever you have space, low-vis missions,
or just throwing a few mags on a belt to hit the range without kitting up.
Compatible with most 5.56 magazine types including GI mags, Magpul®
PMAGS™ and EMAGS™ and HK® mags.
AVAILABLE COLORS
BLACK
KHAKI
1
2
3
4
HEADBORNE SYSTEMS
57
AIRFRAME HELMET
™
FEATURES

Revolutionary vented shell design for passive cooling

Covers more of wearer’s nape than traditional designs

Modular ear and face protection available

Modular ARC Rail™ system available

Contain 3/4” pads

Can be pre-drilled at factory for 3-hole or 4-hole NVG mounts
(configuration compatible with Ops-Core® and Wilcox® 3-hole mounts)
DESIGN
The AIRFRAME™ ballistic helmet sets new standards in protection, comfort,
and modularity. Complete AIRFRAME™ helmets weigh less than complete
ACH 2002 helmets while providing more coverage area. The AIRFRAME™ was
developed with a mandate to dramatically reduce headborne weight while
exceeding common frag threats. A complete medium AIRFRAME™ helmet
weighs only 2.30 lbs., and the large weighs a mere 2.55 lbs. The unique
overlapping shell design of the AIRFRAME™ creates an integrated vent that
provides passive cooling and can reduce the damaging effects of explosive
blast waves. Each AIRFRAME™ helmet features an Ops-Core® H-Nape
Head-Loc™ retention system for unmatched stability, comfort, and ease of
adjustment. Up armoring the AIRFRAME™ with ballistic ear or face protection
is simple and fast (see our EARS™ and CHOPS™ for more info). All helmets
and components are compatible with common ear-pro systems like Peltors®
and Sordins®. Made in the US from US materials.
WEIGHTS PER SIZE

MD 2.30 lbs.

LG 2.55 lbs.

XL 2.75 lbs.
AVAILABLE COLORS
BLACK
TAN
O.D. GREEN
HEADBORNE SYSTEMS
58
COMING FALL 2014
AIRFRAME ATX HELMET
™
FEATURES

Meets IIIA ballistic requirements (industry standard H.P. White test protocol)

Revolutionary vented shell design for passive cooling

Covers more of wearer's nape than traditional designs

Modular ear and face protection available

Modular ARC Rail™ system available

Contains 3/4" pads

Can be pre-drilled at factory for 3-hole or 4-hole NVG mounts
(configuration compatible with Ops-Core® and Wilcox® 3-hole mounts)
DESIGN
The AIRFRAME ATX™ is our law enforcement focused ballistic helmet—
designed to offer the same advantages of our original AIRFRAME™ helmet
while meeting IIIA ballistic requirements (H.P. White test protocol). The
unique overlapping shell design of the AIRFRAME™ creates an integrated
vent that provides passive cooling and can reduce the damaging effects
of explosive blast waves. Each AIRFRAME™ helmet features an Ops-Core®
H-Nape Head-Loc™ retention system for unmatched stability, comfort, and
ease of adjustment. Up armoring the AIRFRAME™ with ballistic ear or face
protection is simple and fast (see our EARS™ and CHOPS™ for more info). All
helmets and components are compatible with common ear-pro systems like
PELTORS®
and SORDINS®. Made in the US from US materials.
AVAILABLE SIZES
MD–XL
AVAILABLE COLORS
BLACK
TAN
O.D. GREEN
59
AIRFRAME ATTACHMENTS
™
RAILS™
Based on the Ops-Core® ARC Rail™ Architecture, this system allows any
number of accessories to be mounted to the helmet. Includes an attachment
for an oxygen mask, NVG-retention bungee cords, and cable management tiedowns. The Ops-Core® ARC Rail™ system used under license from Ops-Core®
Inc. Sold as a pair. Made in the US from US materials.
CHOPS™
Easily attached and removed with one hand, the CHOPS™ offer missiontailorable maxillofacial protection. The CHOPS™ provide simple, lightweight
ballistic protection that doesn’t compromise communication, hydration, or
situational awareness. CHOPS™ use same attachment system as EARS™.
Sold as a pair. Made in the US from US materials.
FEATURES

Allows proper sighting and firing of weapons

Eliminates blind spots inherent to traditional face protection

Able to be donned and doffed in seconds

Compatible with NVGs and most standard tactical goggles

Flexes to fit various face shapes

Provides fragmentation and blast/flame protection
RAILS™
EARS™
Easily attached and removed with one hand, the EARS™ offer scalable and
modular ear-protection. The EARS™ are compatible with nearly all common
ear-pro (Peltors®/Sordins®) and provide simple lightweight ballistic protection
that doesn’t compromise communication, hydration, or situational awareness.
EARS™
use the same attachment system as CHOPS™. Sold as a pair. Made in
FEATURES

Able to be donned and doffed in seconds

Compatible with NVGs and most standard tactical goggles

Compatible with nearly all common ear-pro (Peltors®/Sordins®)
Flexes to fit various face shapes

CHOPS™
AVAILABLE SIZE
One size fits all AirFrame™ helmets.
AVAILABLE COLORS
BLACK
TAN
O.D. GREEN
EARS™
HEADBORNE SYSTEMS
60
AIRFRAME ACCESSORIES
™
STOCKPAD™
The STOCKPAD™ creates a high-friction interface between CHOPS™ and rifle
stock, providing greater stability while sighting. Each pack contains one
adhesive-backed STOCKPAD™ and alcohol wipe for cleaning surface area
before application. Left or right side available. Only available in black. Made
PELTOR™ RAIL ADAPTER
Allows the 3M™ Peltor™ ARC Adapters to fit with our AIRFRAME™ RAILS™.
These adapters also maintain compatibility with existing ARC rail geometry,
and can be used interchangeably. Simple installation replaces the original
mounting hardware, allowing Peltor™ ear-protection to be used with the
AIRFRAME™
helmet. Only available in black. Sold as a pair. Made in the US
from US materials.
STOCKPAD™
AIRFRAME™ VELCRO® KIT
COMING SPRING 2014
Here’s a simple and clean way to attach strobes, battery packs, LEDs,
propellers—whatever you want. Custom shapes lay flat and look way better
than trying a DIY Velcro® job on your helmet. Available in black, tan, and green.
PELTOR™ RAIL ADAPTER
KIT INCLUDES

2 front shapes

2 side shapes

2 top shapes

1 back shape
AVAILABLE COLORS
BLACK
AIRFRAME™ VELCRO® KIT
(SEE DESCRIPTION)
TAN
GREEN
61
AIRFRAME HELMET COVERS
™
AIRFRAME ™ HELMET COVER
The AIRFRAME™ HELMET COVER helps camouflage the helmet and provides
points to attach items such as NVG battery packs, IR tape, strobes, etc.
Finely tailored to avoid interfering with the helmet’s ventilation. Includes
multiple attachment options for local vegetation/jute. Attaches with included
Velcro® straps.
AIRFRAME™ HELMET COVER CUTOUT
Same base design as the AIRFRAME™ HELMET COVER, with the addition of a
laser-cut hole in front panel. This allows for easy removal of helmet cover
without unscrewing NVG mount.
AVAILABLE SIZES
MD–XL
AVAILABLE COLOR
AIRFRAME™ HELMET COVER CUTOUT
MULTICAM®
AIRFRAME™ HELMET COVER
HEADBORNE SYSTEMS
NIGHTCAP
62
™
FEATURES

No helmet needed to use NVGs

Highly adjustable headband and chin strap

Padded structural support for NVG mount

Battery pack attachment

Simple low-profile chin strap

Cable routing channels
DESIGN
Solving the problem of wearing NVGs when you don’t need a helmet, the
NIGHTCAP™
is great for low-vis needs, general recce work, and even hunting.
Stuff it in your pocket until needed and then just clip your NVGs in for a
lightweight and stable option when a helmet is not needed. Packs down to
practically nothing. Feels like wearing a baseball hat. Simple, adjustable,
and breathable. Compatible with all current 3-hole and 4-hole NVG mounts
(not included). Made in the US from US materials.
AVAILABLE SIZES
One size fits all.
AVAILABLE COLORS
BLACK
MULTICAM®
STUFF + THINGS
65
CRYE PRECISION OFFICIAL GEAR
™
CRYE PRECISION™ LOGO TEE
BLEND IN™ TEE
MADE IN BROOKLYN TEE
Crye Precision™ T-shirts make perfect field dressings, improvised dust masks,
Subtle BLEND IN™ slogan printed on the front, plus a small MultiCam®
A vintage, nautical-themed tee—an homage to the fact that our products
and function well as birthday gifts too. Made in the US from US materials.
logo on the sleeve. Made in the US from US materials.
are proudly made in Brooklyn, NY in the historic Brooklyn Navy Yard. Made
LEAD UNION TEE
SHOOTER'S CAP – MLI™
SHOOTER'S CAP – CP™
Unite and show your support for the brotherhood that has been hard at work
Identical to the Crye Precision™ logo cap—instead this version features a
Our take on the classic ball cap, with some subtle differences. No metal
protecting our way of life. Made in the US from US materials.
Velcro® loop panel on the front. No metal rivet on top. The underside of the
rivet on top. The underside of the brim is a black Velcro® receptive material
brim is a black Velcro® receptive material for attaching lights, etc. Made in
for attaching lights, etc. Made in the US from US materials.
ACCESSORIES
66
MAJOR LEAGUE INFIDEL OFFICIAL GEAR
™
MLI™ TEE
VINTAGE MLI™ TEE
SHOOTER'S CAP – MLI™
Wear this one to your next mandatory cultural-diversity-sensitivity training
Tenth anniversary limited edition MLI™ shirt with vintage look and feel.
Based on the design of our other caps, this version features an embroidered
session. Always sure to start friendly conversations on airplanes, malls, and
MLI™ logo on the front. Made in the US from US materials.
MLI™ EMBLEM
MLI™ STICKERS
MLI™ MUG
High-quality chrome-plated emblem with adhesive backing. Perfect for any
These high quality glossy stickers look good on almost anything—especially
A fun holiday gift for that useless hippie uncle we all have. Mug imported,
vehicle—land, sea, or air.
Apaches and A-10s. Available in two sizes.
printed in the US.
at hippie protests of all sorts. Made in the US from US materials.
OUR COMMITMENT TO AMERICAN MANUFACTURING
We believe in America and we take pride in doing things
the right way. This is why we are committed to American
manufacturing. We believe a country that forgets how great
things are made soon forgets the things that made it great.
We are headquartered in the historic Brooklyn Navy Yard in
New York City. This is the same yard that launched some of
America’s most important warships, from the USS Ohio in
1820 to the USS Missouri in 1944, on whose decks WWII
was officially ended September 2, 1945. We take pride in
continuing the Yard’s multi-century legacy of building the
best for our fighting men and women. We work very hard to
produce the best tools available and we do so right here in
the heart of America’s most celebrated city.
We’re growing every year and continually reinvesting in our
personnel, our facilities and our processes to help fortify
and expand our manufacturing base. We owe our success
to our team and to our customers—people who share a
deep appreciation for the value of an authentic, innovative
product. While we may only be a small portion of the US
economy, we’re confident the positive ripple effect of
supporting domestic manufacturing extends far beyond
us. By making our products with the level of care and
craftsmanship that can only be achieved by keeping it close,
we’re doing our part to build and maintain a knowledge
base that might otherwise be lost. This is all part of doing
things the right way. As long as our customers continue to
demand innovative and high-quality domestic manufactured
products we’ll continue the effort to provide the best gear
available—all made right here in America.
BODY ARMOR
ABOUT US
CONTACT INFO
It is against Federal Law for a person convicted of a violent felony to purchase
Crye Precision designs and manufactures truly innovative equipment for
Crye Precision LLC
or possess body armor. In addition, various states also have laws restricting
America’s fighting forces. We are proud and honored to serve our customers'
Brooklyn Navy Yard
the purchase or possession of body armor by persons convicted of certain
needs. We spend as much time as we can with users, continuously
63 Flushing Ave Unit 252
felonies, other crimes of violence, or drug crimes. By purchasing body armor,
incorporating their experience and feedback into the gear. We give them our
Brooklyn, NY 11205
you acknowledge and certify that (I) you have no felony convictions, (II) you
full support and are indebted to them for their service and their sacrifice. We
have not been convicted of any other crime that would restrict your ability to
make uncompromising gear for uncompromising individuals. We work hard to
P 718–246–3838
purchase or possess body armor under any Federal or State law, (III) you do not
provide smart, high-performance, long-wearing gear for people who demand
F 718–246–3833
intend to use the body armor for any criminal purpose and (IV) you are over 18
the best. We make all of our gear in America from American materials. Every
[email protected]
years old. Crye Precision reserves the right, in its sole discretion, to refuse to
item is designed to help you perform better.
www.cryeprecision.com
sell body armor to any person. Additionally, the sale of body armor to residents
of Connecticut is restricted to in-person sales, unless the sale is made to
certain law enforcement or military personnel. We require that all orders of
body armor be accompanied by a government issued photo identification.
ACCURACY
We try very hard to keep the information in our catalogs as accurate and up
to date as possible. However, errors may occur that may sometimes result in
WARRANTY
If a defect in materials or workmanship is found in any of our products, we
will repair or replace it, free of charge, for the lifetime of the product. This
excludes normal wear and tear. Be aware that the customer is responsible for
any and all return shipping charges. This applies to the original purchaser and
is nontransferrable.
inaccurate information being displayed. This includes, but is not limited to:
product description, images, sizing information, and availability. Additionally,
we are constantly updating products based on user feedback from an evolving
battlefield. Some product features may vary from what is displayed in the
catalog. This catalog is meant to serve as a useful guide and commerce tool.
Crye Precision is not responsible for any errors or discrepancies. Item designs
are subject to change.
© 2014 CRYE PRECISION LLC. ALL RIGHTS RESERVED. REPRODUCTION OF THIS CATALOG IN ANY PART WITHOUT CONSENT IS PROHIBITED.
REV 071514
WWW.CRYEPRECISION.COM

2014 product guide

Transcription

Similar documents

501st Empire Strikes Back - Boba Fett

Tactical Vest

2014 product guide - Soldier Systems Daily

FJ Cruiser Stealth Front - Toyota FJ Cruiser Community

02 Coat of Arms, Family Crest, Shield

Engineering. Technology. Protection.

The Medieval Warrior

Crowd Control Signature Series

install instructions

The 2014 Wall Calendar Program