Mil-Spec Pyrotechnics Catalog - Mil-Spec

Transcription

PYROTECHNICS CAPABILITIES
MIL-SPEC INDUSTRIES is pleased to announce its joint venture production facility to enhance and grow the
technology and production of special pyrotechnic devices. We specialize in providing difficultto-produce pyrotechnic compositions. This facility has been an important supplier for the U.S.
Government and its prime contractors since 1968. The 380-acre site consists of 118 buildings
including explosive storage bunkers.
We offer a wide variety of explosive and pyrotechnic compositions in powder, free-flowing granular, and pellet forms.
Delay compositions include Manganese, Tungsten, Zirconium/Nickel and Boron/Barium Chromate formulations. Burning
rates range from 0.025 to 42 seconds per inch.
Ignition Compositions include A-1A Gasless Ignition Powder, MTV Boron/Barium
Chromate and Boron Potassium Nitrate (BKNO3). Other standard compositions include, but
not limited to various tracer compositions and others developed to customer specifications.
Many other materials are pelletized, including PBXN-5, Black Powder and various RDX
compositions. Assemblies and loaded devices are also part of our capabilities and product
line. They include Delay Cartridges, Tracers, Boosters, Leads, Fuzes, Explosive Fittings,
Igniters, Rocket Igniters, and Components for consumable ammunition.
Loading and Assembly capability ranges from small quantities of special development units to a million or more
production units, manufactured under ISO 9001:2008 and SPC controls.
Pelleting Presses can produce pellets in many configurations with diameters from 1/16 to 3 ½ inches (1.58 to 88.9 mm).
Quality Assurance is our 1st priority. Our offered pyrotechnic materials have demonstrated specific advantages over those
processed solely to U.S. military specifications. They include:
∙ Improved flow characteristics and integrity of mix ∙ Superior properties of the consolidated material
∙ More consistency ∙ Better batch-to-batch reproducibility ∙ Ease and versatility of loading
POWDERS
DELAY COMPOSITIONS
TRIP FLARE
M49A1
PELLETS
HIGH EXPLOSIVE COMPOSITIONS
POINT DETONATING FUZE
M505A3
40MM STAR CLUSTERS
M585, M664 & M663
40MM PARACHUTE ASSY
M662, M661, M583A1
SMOKE & ILLUMINATION SIGNAL
MK124
40MM PRACTICE
CARTRIDGE M781
TRAINING FLASH BANG
MK155
Mil-Spec Industries specializes in providing difficult-to-produce pyrotechnic compositions in powder, granular and
pellet form. In-house pelletizing facilities can support rates of up to 200,000 per day.
Variations – Mil-Spec Industries has the research and development
capabilities to modify existing delay, tracer, ignition and other
pyrotechnic compositions, or create new formulations. Many
pyrotechnic and explosive compositions are available in pellet form.
Sizes range from 1/16 inch to 3-1/2 inches (1.58 to 88.9 millimeters).
Configurations include cylindrical, bi-convex, cored and specialty
shapes (kidney, triangular, notched, etc.).
e-mail: [email protected]
http://www.mil-spec-industries.com
Configurations can be modified to meet specific customer
requirements.
Characteristics – Characteristics are listed for just a few of the
compositions available. Two categories are described - delay and
ignition; they are indicative of the range of formulations. For more
information, contact a Mil-Spec representative.
42 Herb Hill Road • Glen Cove, NY 11542
Tel: (516) 625-5787 • Fax: (516) 625-0988
Tel: (516) 625-5787 • Fax: (516) 625-0988
M505A3
Point Detonating Fuze Assembly
M505A3
Point Detonating Fuze Assembly
M505A3 Fuze Assembly is a mechanical point detonating super-quick fuze for 20MM and 25MM
HE, HEI, & HEIT ammunition and is predominantly used against light ground targets and air-to-air
engagements. The initiating explosive element for the M505A3 Fuze consists of a M57A1 Stab
Detonator, sealed and staked within a Rotor Ball type S&A Device and restrained in a safe position
by a C-shaped Detent Spring engaged in the shoulder of the Rotor Ball. The output energy of the
M505A3 Fuze is derived from a Booster Assembly sealed and torqued in the aft end of the fuze.
*Specifications are subject to change without notice.
Tel: (516) 625-5787 • Fax: (516) 625-0988
Tel: (516) 625-5787 • Fax: (516) 625-0988
40 MM
Parachute Assemblies
40 MM
Parachute Assemblies
Approximately 2 seconds after firing, the delay element ignites the ejection
charge/candle. The ignition charge ignites the illumination candle canister, and
the ejection charge ejects the parachute/candle assembly out the front end of
the projectile. The parachute deploys upon ejection and provides the visual
light for approximately 45 seconds while descending.
M583A1 White Star
M662 Red Star
M661 Green Star
XM992 Infrared (not shown)
Tel: (516) 625-5787 • Fax: (516) 625-0988
Tel: (516) 625-5787 • Fax: (516) 625-0988
40 MM
Star Clusters
40 MM
Star Clusters
M585 White Star Cluster has a white plastic dome with a raised “W” to
indicate the flash color. In addition there are five raised dots on each plastic
dome indicating cluster signal. M664 Red Star has a raised “R” for red, and
the M663 Green Star Cluster has a raised “G” for green. The clusters emit a
luminosity of 30,000 candlepower and reach an altitude of 500-700 feet.
The burn time for the clusters is approximately four to six seconds.
M585 WHITE STAR CLUSTER
M663 GREEN STAR CLUSTER
M664 RED STAR CLUSTER
M664 RED STAR CLUSTER
I.D. # UN0312
SHIP ID: Cartridge Signal UN0312
M663 GREEN STAR CLUSTER
EX. # 2008110066
Pack: 22per Ammo Can
M585 WHITE STAR CLUSTER
NSN: # 1310-00-922-9784
HAZ CLASS: 1.4G
2 Ammo Cans per crate
DODIC: 8536
Tel: (516) 625-5787 • Fax: (516) 625-0988
M430, M433 Dummy Cartridge
M430 Shape Dummy Cartridge (40MM)
M433 Shape Dummy Cartridge (40MM)
M430
M433
Tel: (516) 625-5787 • Fax: (516) 625-0988
M26 Degradable Training Hand Grenade
M26 Degradable Training Hand Grenade
Tel: (516) 625-5787 • Fax: (516) 625-0988
40mm Smoke Grenade for M79
M713 40mm Red Smoke Ground Marker
M715 40mm Green Smoke Ground Marker
M716 40mm Yellow Smoke Ground Marker
Tel: (516) 625-5787 • Fax: (516) 625-0988
Impulse Cartridges
Tel: (516) 625-5787 • Fax: (516) 625-0988
Explosives
Leads, Detonators & Boosters
Used in various explosive devices
M505 Booster
Booster Tape
Explosive leads
120MM Tracer
Cup Assembly
Explosive Booster
Tel: (516) 625-5787 • Fax: (516) 625-0988
M781
40MM Practice Cartridge
M781
40MM Practice Cartridge
M781 is a fixed, practice-type ammunition designed for firing from 40 MM
grenade launchers M79 and M203. This cartridge is a fixed round of
ammunition consisting of a metal projectile body with a rotating band and a
cartridge case assembly. A hollow plastic ogive is filled with a high visibility
yellow-orange dye. A .38 caliber blank cartridge is press-fitted into the base of
the cartridge case and provides the gas pressure needed to propel the projectile
through the launcher barrel. Projectile range of 200-300 meters.
Tel: (516) 625-5787 • Fax: (516) 625-0988
Tel: (516) 625-5787 • Fax: (516) 625-0988
M49-A1
Surface Trip Flare
M49-A1
Surface Trip Flare
M49-A1 Surface Trip Flare is used for
illuminating encampment perimeters or
as a booby trap signal. The flare may
be fired by releasing the trigger or by
removing a pull pin. If a tripwire is
used, cutting or breaking the tripwire
will also fire the unit. Upon activation
the M49-A1 burns for a minimum of
55 seconds and with an average
luminosity of 35,000 candle power.
Tel: (516) 625-5787 • Fax: (516) 625-0988
Tel: (516) 625-5787 • Fax: (516) 625-0988
MK 124
Smoke & Illumination Signal
MK 124 Smoke & Illumination Signal
This signal consists of an aluminum case with protective caps on each end. The case has two
raised beads around the circumference for positive flare identification during night use. The
case contains four sub-assemblies: smoke candle, smoke igniter, flare candle, and flare
igniter. The igniter consists of an arming lever that must be extended before functioning and
a mechanism that cocks and then releases the firing pin.
Tel: (516) 625-5787 • Fax: (516) 625-0988
MK-155
Training Flash Bang
MK-155
Training Flash Bang
The MK-155 contains a M201 A1 Smoke Grenade
Fuze and a standard ballistic propellant as the main
charge.
MK-155 is a manually deployed nonfragmenting training charge which simulates a FlashBang Diversionary Charge. The MK-155 is attached
to a reusable base.
Technical Data Delay 1.2 to 1.8 seconds
Cotter Pin Pull Force 8 to 23 pounds
Output Overpressure 160 to 165 Dbl
Water Submersible
30 feet
Shipping
40 each per Ammo Can
2 Ammo Cans per Wirebound Box
Classification 1.4G
Tel: (516) 625-5787 • Fax: (516) 625-0988
40MM Non-Lethal
Marking Cartridge
40MM Non-Lethal
Marking Cartridge
This round provides a non-lethal point control measure on a targeted individual. The
projectile has a crushable rubber nose and a hollow internal cavity which houses the
liquid payload. On impact, the internal cavity ruptures. This action transfers kinetic
energy as well as the payload to the target, allowing effective delivery of a variety of
non-lethal liquid payloads.
Tel: (516) 625-5787 • Fax: (516) 625-0988
Non-Metallic Training
Hand Grenade
Environmentally Friendly • Safe • Realistic Training
This non-metallic training hand grenade simulates the M69 grenade.
The bomb body is made of clay and mineral powder and the fuse body
is made of bio-degradable plastic.
Weight: 13 oz.
Height: 3 3/4"
Diameter: 2 1/4"
Delay: 4.5 sec
Sound: 100+ decibels
Color: Blue with white markings
Tel: (516) 625-5787 • Fax: (516) 625-0988
LX01
Car Bomb Simulator
LX01
Car Bomb Simulator
The 25 lb. naphthalene bombs are devices
that create a ball of flame approximately 5075 feet in diameter that travels a minimum of
100 feet into the air. The bomb device is 12
inches in diameter and 14 inches in height.
These devices contain an electrical initiator
with leads of at least 50 feet in length.
Tel: (516) 625-5787 • Fax: (516) 625-0988
LX09 44MM Bowman
Stinger Missile Simulator
LX09 44MM Bowman
Stinger Missile Simulator
The Bowmans are used to replicate a Shoulder Fired Rocket Propelled Grenade. The Bowman
produces a signature white ball of fire that is approximately 2 inches in diameter and travels
approximately 75-100 meters. This device is approximately 2 inches in diameter and 12 inches in
length. The Bowman is constructed of a cardboard tube with a 3-foot lead wire and must be fired
from an angular launcher. Cannot be manually deployed.
Tel: (516) 625-5787 • Fax: (516) 625-0988
LX45 Vulcan
Tracer Fire Simulator
LX45 Vulcan
Tracer Fire Simulator
The Vulcan Simulators are devices that are
used to replicate Small Arms Fire. The
devices are 15 inches in length and 4-3/4
inches in width, weighing approximately 3.5
lbs. The simulator has four rows with fifteen
tubes to each row, which are fired one row
at a time to produce fifteen shots fired at
approximately 0.05 seconds to 1.0 second
intervals for a total of sixty shots.
The simulator shoots colored lights at
approximately 50 yard distances. These
devices are available in red, green, and
white light. The simulator is provided with
moisture resistant protection and a
camouflage exterior. The devices are sealed
in barrier bags and packaged one per box.
Tel: (516) 625-5787 • Fax: (516) 625-0988
4
2He
r
bHi
l
lRo
a
d•Gl
e
nCo
v
e
,NY 1
1
5
4
2

Mil-Spec Pyrotechnics Catalog - Mil-Spec

Transcription

Similar documents

sunday brunch menu.pptx

the program brochure

the town centre - Uni Hill Factory Outlets

My Brother, My Sister: Shannon Boodram Rob Hill, Sr.

1998 BCP/Wheelabrator Pass Thru Shotblast M

2015 Mississippi Screening Events - AL

Click Image for the PDF - The Unique Yankee "INN"

electrical products

IIJS 2014 Flyer - India International Jewellery Show

brochure - Cades Cove Heritage Tours