Brochure PDF

1
The Blastec Wheel
“
BLASTEC® is the originator of the 1,760 RPM
direct drive shot blast wheel. Since its introduction
in 1976, many others have attempted to equal
our success. Our original design concept, now in
its 7th generation, still remains the leader in the
industry: A large diameter wheel turning at a low
RPM delivering the maximum amount of abrasive
per square inch. While we have improved the
maintenance aspects of the BLASTEC® wheel
through these generational changes, we have
never made a part obsolete. However, all
generations of the BLASTEC® wheel can be
updated to the latest technology.
Increase
Productivity
By Up To 50%!
Use of the BLASTEC® wheel increases productivity
by up to 50%. Blade life is extended by 100% or
more, while impeller and control cage life is
extended by as much as 300% when compared to
most competitive designs. In production tests
and operating cost studies, the BLASTEC® wheel
outperforms conventional 13 inch - 19 1/2 inch
diameter, 2,250 - 3,600 RPM wheels. The BLASTEC®
wheel operates at lower dBA levels compared to
the V-belt wheel assembly, and thus eliminates the
need for sound suppressors.
“
DESIGN FEATURES
®
The multi-patented 24-inch diameter BLASTEC®
wheel incorporates a double-sided runnerhead
design, and two-sided, reversible blades of long
and narrow design features. Operating speed is a
cool, efficient 1,760 RPM.
To improve performance standards, BLASTEC®
engineers pioneered the concept of low RPM,
direct drive between motor and wheel.
Horsepower robbing, high-maintenance items
such as spindle and pillow block bearings, sheaves,
and V-belts have been eliminated. This design
assures maximum transmission of net motor
energy to the blade tips, optimizing shot volume
and pattern efficiency.
1-800-241-3016
n
blastec.com
The BLASTEC® wheel is designed to rotate
bi-directional, clockwise and counter-clockwise
(CW or CCW), at its full capacity in motor sizes
ranging from 15-125 HP. The same wheel parts
are employed regardless of rotational direction or
replacement parts for different applications or
rotations. Therefore, in multi-wheel facilities, parts
inventory requirements are greatly reduced.
n
[email protected]
HORIZONTAL & VERTICAL PLATE DESCALING SYSTEMS
BLASTEC® manufactures both horizontal and vertical plate
descaling machines. We manufacture the world’s fastest
horizontal plate descaling systems, capable of blasting plate
up to fifteen feet in width. Our patented “Ricochet”design
prevents abrasive build-up, allowing one pass cleaning at
unsurpassed speeds. Horizontal plate descalers can also be
configured to process structural shapes for pre-blasting
material prior to fabrication. Plates can be up to 15ft. wide
in various lengths and thickness.
Quality, reliability, and higher
productivity are why the world’s
leading manufacturers
of barges, rail cars, submarines,
and wind towers demand
BLASTEC® plate blast descaling
systems for their applications!
3
1-800-241-3016
n
blastec.com
n
[email protected]
BLASTEC FINISHING SYSTEMS
®
BLASTEC® offers complete plate, structural or combination
plate/structural finishing systems where material can
be loaded onto our conveyor system, dried, pre-heated,
descaled to any finish required, primed and cured in a
continuous linear production line.
Our patented ricochet descaling system allows
us to place our cross draft paint booth, with
upper and lower paint gun reciprocators, in
close proximity to its exit end, applying either
water or solvent based pre-construction primer
evenly to the surface prior to curing.
Our synchronous speed slat conveyor moves primed product
through the curing oven with minimal contact.
Ship and barge yards, steel distributors and processors and
above ground storage tank manufacturers, are just a few of
the industries to have taken advantage of our highly
productive, consistent technology.
1-800-241-3016
n
blastec.com
n
[email protected]
4
STRUCTURAL STEEL DESCALING SYSTEMS
Nobody does structural steel better than BLASTEC®.
BLASTEC® manufactures many types of descaling
systems for the structural steel industry at the fastest
line speeds available. Machines can be configured for
pre- or post-fab applications, and for all sizes and
shapes of structural pieces. The superior coverage of
the BLASTEC® wheel combined with the reliability and
maintainability of our machines means a higher
return on investment which in today’s competitive
environment is a must.
BEFORE
AFTER
Angles, channels, and small beams,
massive bridge girders,
and complex weldments,
BLASTEC® can provide the system
that is right for you!
5
1-800-241-3016
n
blastec.com
n
[email protected]
RAIL CAR DESCALING SYSTEMS
BLASTEC®’s rail car blast machine system is the most versatile
and sophisticated design available for rail car cleaning.
Utilizing Smart Blast® control technology to target the abrasive
blast and specific BLASTEC® wheels in difficult to clean areas
provides a higher quality and more uniform surface profile for
today’s modern coatings while descaling to remove scale and
rust from large carbon steel rail car weldments.
The BLASTEC® rail car blast machine material transport system:
n Utilizes a heavy duty drag chain conveyor system
n Variable speed drive controls to handle multiple rail car types and size requirements
n Operates in both directions
The BLASTEC®’s
rail car blast system
also includes a
continuous abrasive
reclamation system.
SMARTBLAST
DESCALING SYSTEMS
®
Our SmartBlast® technology is in operation
worldwide. These systems have proved to be
reliable, repeatable, and highly flexible.
Talk to a BLASTEC® Regional Manager to learn how
SmartBlast® technology can increase the return on
your shot blast investment.
1-800-241-3016
n
BLASTEC® SmartBlast® systems represent the future of shot
blasting. This BLASTEC® first combines oscillating wheel panels
with Programmable Logic Controls. SmartBlast® technology
gives unparalleled cleaning for complex weldments, large
castings, rail cars and post-fab girders. SmartBlast® systems
are perfect for multiple product lines, allowing the operator
to change configuration at the touch of a screen. The flexible
BLASTEC® wheel allows for clockwise and counter-clockwise
wheel rotation in the same blast cycle for particularly
hard-to-clean areas.
blastec.com
n
[email protected]
6
BAR-REBAR-PIPE-TUBE DESCALING SYSTEMS
BLASTEC® manufactures bar-rebar-pipe-tube descaling
systems to the customer’s specifications with unsurpassed
line speed capabilities. BLASTEC® has bar-wire-pipe-tube
systems in place with customers worldwide. Many of them
have multiple BLASTEC® systems, a testament to BLASTEC®
quality, reliability, and performance.
CONTINUOUS STRIP DESCALING SYSTEMS
BLASTEC® manufactures continuous strip descaling
systems with unsurpassed line speed capabilities.
BLASTEC®’s unique design reduces unnecessary
wear on wheel components. The BLASTEC® blast
pattern allows the wheel to be placed closer to the
work surface than any other manufacturer while still
covering the entire width of the strip. BLASTEC®
manufactures strip systems for both carbon steel
and stainless steel.
7
1-800-241-3016
n
blastec.com
n
[email protected]
FOUNDRY DUTY
®
BLASTEC manufactures a full line of
heavy duty machines for the foundry
industry:
n Continuous Flow
n 20 Cube Tumble Blast
n 34 Cube Tumble Blast
n Manganese Wire Mesh Belt
n Single-Door Spinner Hanger
n Pass-Through
Spinner Hanger
n Table Blast
n Turnstile
Spinner Hanger
n Car Rooms
DRUM & LID DESCALING SYSTEMS
BLASTEC® manufactures descaling machines for
30 and 55 gallon steel drums and lids, with
production rates in excess of any other
manufacturer’s equipment.
Our patented machine design is capable of up to
1,500 to 4,000 barrels per 8 hour shift.
The BLASTEC® lid
cleaning machines
complement our
drum cleaning
machines, providing
a true drum
processing system.
1-800-241-3016
n
blastec.com
n
[email protected]
8
EQUIPMENT UPGRADE COMPONENTS
BLASTEC® offers a complete line of BLASTEC® designed
components to upgrade your existing shot blast machine(s)
to BLASTEC® quality standards. BLASTEC® components are
manufactured to outlast and outperform the
components they replace. Examples are:
n
n
n
n
n
n
n
n
n
n
The Ultra Efficient BLASTEC® Wheel
Airwash Separators - 24” to 144”
Screw Conveyors and Drives
Abrasive Feed Gates
Machine Control Panels
Elevators - Up to 24”x 44”
Abrasive Replenishers
Rotary Screen Assemblies and Drives
Roller Conveyor Assemblies, Drives and Components
Material Handling Systems and Components
We can also provide:
n
n
n
n
n
9
1-800-241-3016
n
blastec.com
n
11 - 14% manganese plate, bar
and angle
Abrasive-resistant steel plate
High-chrome cast liners and cap nuts all sizes
Field technical service
Service/maintenance contracts
[email protected]
“
Blastec Wheels have the industry’s only
blade capable of an end-for-end flip.
RETROFITS
MAINTENANCE
“
The BLASTEC® wheel is specifically designed to
simplify maintenance procedures. The double
sided runnerhead is constructed of extremely
durable alloy steel. It is machined to exacting
tolerances, heat treated, and balanced to the
toughest quality standards. Blades are easily
removed for replacement or can be flipped
end-for-end and reinstalled all through the top
lid opening without the inconvenience of removing
the impeller, control cage or feed spout assembly.
Side and end liners can also be removed without
disturbing any of the wheel’s moving parts.
As a result of this superior design, overall
maintenance time is significantly reduced.
1-800-241-3016
n
blastec.com
The BLASTEC® wheel is the perfect candidate when
considering an alternative to replacing your existing
shot blast machine. Each BLASTEC® wheel is
shipped completely assembled. The industrial
electric motor, along with the steel housing and
hinged lid are mounted to a BLASTEC® heavy-duty
base plate. Factory pre-tested, the wheel is ready for
installation and operation with minimal setup.
An installation drawing illustrating the exact wheel
location required for optimum performance is also
provided. BLASTEC® offers installation and start-up
assistance or complete turn-key installation.
n
[email protected]
10
BLASTEC DUST COLLECTOR SYSTEMS
®
APPLICATIONS:
n Wheel Blast n Blast Rooms n Weld Fumes
n Sandblasting
n Manual Air Blast
n Peening
BLASTEC® cartridge dust collectors use cartridges that
contain a pleated, non-woven filtering media, as
opposed to woven bags used in bag houses.
The pleated design allows for a greater total filtering
surface area than in a conventional filter of the same
diameter. The greater filtering area results in a reduced
air to media ratio, pressure drop, and overall collector size.
DUST COLLECTOR OPTIONS:
n
n
n
n
Explosion Vents n Platforms
Silencers n View Ports Fire Suppression System n Rotary Air Lock Safety Monitoring Filter MANUAL BLAST BOOTHS
Our well illuminated “stand-alone” manned air blasting systems
or integrated linear “touch up and blow-off booths” are custom
engineered to meet the customer’s needs. Conveyor systems
range from fork truck loading, work car or overhead mono-rail.
Full or partial recovery floors are available. BLASTEC®’s
standard recovery system components are an integral part of
our cross draft blast booths.
Single or multiple outlet blast pots with dual trigger blow-off
capabilities are standard. Our operator safety gear includes blast
suits, blast hoods with cape, and CO² monitoring systems with
alarms along with door interlocks with emergency exit lighting.
11
1-800-241-3016
n
blastec.com
n
[email protected]
BLASTEC® IN HOUSE CAPABILITIES
n Plate Burning n Certified Welders for Fabrication
n Plate Bend and Forming n UL 508 Certified Panel Shop
n Blast and Paint n On Staff Mechanical and Electrical
Engineering
All BLASTEC® machines are proudly manufactured
in Alpharetta and Cumming, Georgia, USA.
FIELD SERVICES
BLASTEC®’s Field Service Technicians are standing by to
assist you with all of your shot blasting requirements.
Contact BLASTEC® to schedule a
service professional for your area.
Phone: 800-241-3016
E-mail: [email protected]
24 Hour Shipping
All BLASTEC® wheel replacement parts, except electric motors, are ready to be
shipped within 24 hours after receipt of order, or We Pay The Freight.
This guarantee is valid Monday through Friday during regular plant working hours.
[email protected]
800-241-3016 (toll free)
770-475-2700 (local)
770-475-2336 (fax)
13