C Vestel Customer Technical Support Department SOFTWARE

Transcription

Vestel Customer
C
Technical
Support Department
SOFTWARE UPLOAD TRAINING OF
17MB46 LCD TV
Ercan ÖZ
Ö
2011
Eğitim & Servis Geliştirme Müdürlüğü / Hazırlayan: Mustafa Özer
1
Subjects:
Ordering information of the 17DB46 Module
03
17DB46 connection sockets
04
Necessary Programs
05
Uploading New Analog Software
06 - 21
Uploading
Up
oad g New
e Digital
g a So
Software
a e via
a DB46
6
21 - 26
6
Uploading New Digital Software via USB
27
2
Order information of the 17DB46 MODULE
20497534
MD.ASY.17DB46-SW UPDATE&DEBUG BOARD
Code info of the 20497534 , You can order from web page
page.
https://www.vestelservice.com/
3
17DB46 Connection sockets
Connection sockets description of 17DB46 Module.
Analog mode
Debug or ISP
select switch
Analog
A
l
or
Digital mode
select switch
VGA
Connection
Socket for
Analog SW
update
Scart
Connection
for Digital SW
update
USB socket
for
connection
to PC
4
Necessary programs:
Copy MB46 folder from
installation CD,
to “ C “ directory of your PC
5
Analog Software Uploading with 17DB46
6
Analog Mode İnstallation of 17DB46 Module on the PC.
Firstly, you must install Analog Driver program
Firstly
“PL2303-Driver_XP2K_v204102.exe” file.
MB46 ---Æ ANALOG ---Æ DRIVER [UART – USB]
Run the “PL2303-Driver_XP2K_v204102.exe” driver program.
7
Connect your DB46 programmer board to PC USB input
Wait short time and check COM port number via “Device Manager”
8
Checking old Analog SW Version of 17MB46 before Uploading
MENU 4 7 2 5
MENU,4,7,2,5
Analog TV Menu
Service Menu
Viewing OLD software version on servis menu
9
17DB46 with PC and Main Board connection diagram
USB Connection Cable
Digital SW Update : via SCART socket
Analog SW update: via VGA socket
10
17DB46 with PC connection diagram
! Att ti
!..Attention,
Y
You h
have tto d
do thi
this connection
ti while
hil TV P
Power OFF
OFF.
17DB46
11
17DB46 with TV and PC connection diagram
Directly connect the DB46 VGA socket to VGA input of the TV
İt is p
possible to uploading
p
g new analog
g software via VGA input
p
12
Chose
Analog
mode
Chose ISP
mode
Choose Analog mode and ISP mode via related switch
13
Run the spisp_V1.46.exe in the MB46 folder.
14
You must choose yyour COM p
port number which yyou have checked on
“Device Manager” menu of PC
15
Choose “Whole-chip” via “Option menu
16
Select *.bin File, click the “Select File” or click the menu bar
”Fil ---ÆSelect”
”File
ÆS l t”
17
Click Start button or the Start / Stop item in the menu bar. The Update
process will begin.
p
g
Remove the DB46 board from TV after finished upload
18
After fi
Aft
finished
i h d upload
l d new SW
SW, you should
h ld power OFF and
d ON (remove
(
power cable and put again to power plug-220V) and enter the service
mode. Choose “Reset eeprom” which is under the “NVM EDIT” item,
than wait short time, TV will turn OFF-ON automatically.
19
Checking new Analog SW Version of 17MB46 after Uploading
MENU 4 7 2 5
MENU,4,7,2,5
Analog TV Menu
Service Menu
Viewing NEW software version on servis menu
20
Di it l S
Digital
Software
ft
Uploading
U l di
with
ith 17DB46
21
Digital Software Uploading with 17DB46
First of all, you should install driver file.
Click the “825D&U_Drv_Inst_en_0516.exe” file, which is in the “Digital”
folder.
22
• Digital
Di it l SW can uploading
l di 2 diff
differentt way
1. Via Scart input (with DB46)
2. Via USB input (with empty USB memory)
• Digital SW file name should be “rom.bin”
• “rom.bin” file should be put in same folder with “Upload_TD.exe”
program
Chose
Digital
g
mode
Choose Digital Mode via related switch
23
connect the DB46 board to TV Scart input
p via scart cable
24
•Remove power cable from 220V during TV ON condition.
•Connect DB46 board between TV-scart with PC-USB input
•Copy your SW file “rom
rom.bin
bin” (suitable of your TV model) into “digital”
digital
folder
•Click “Upload_TD.exe” program.
•After
Aft “Please
“Pl
Turn
T
On
O the
th Power”
P
” message, you should
h ld apply
l power
(220V) your TV. The update process will begin.
25
Message of programming steps of “Upload_DT.exe”
Remove the Scart cable from TV after finished upload and turn off TV
26
Checking new Digital SW Version of 17MB46 after Uploading
Choose digital mode your TV and follow above steps for checking
“Digital SW” version
27
Digital Software Uploading via USB input
• Digital SW can uploading 2 different way
1. Via Scart input (with DB46)
2. Via USB input (with empty USB memory)
• Digital SW Upgrate via USB input of the TV
1. Copy new Digital SW file into the empty USB Flash memory
2. File name should be “f_up.bin”
3 Turn on TV set and switch the Digital mode
3.
4. Put the USB memory to USB input of the TV set during this
condition (working in digital mode)
5 A message appear on the screen after a short time
5.
6. You should wait approiximately 1 minutes for SW upgrade process
after finished the upgrade, a message appear on screen
7 Y
7.
You should
h ld T
Turn off
ff TV sett and
d remove USB memory and
d th
than
turn on again
28
• Analog SW Upgrate via USB input of the TV
1. Copy new Analog SW file into the empty USB Flash memory
2. File name should be “f_up_a.bin”
3 Turn on TV set and switch the Digital mode
3.
5 A message appear on the screen after a short time
5.
7 Y
7.
You should
h ld T
Turn off
ff TV sett and
d remove USB memory and
d than
th
turn on again
29
• St
St-By
By Microcontroller IC - SW Upgrate via USB input
of the TV
1. Copy
1
C
new Analog
A l SW file
fil iinto
t th
the empty
t USB Flash
Fl h memory
2. File name should be “f_up_s.bin”
3. Turn on TV set and switch the Digital mode
5. A message
g appear
pp
on the screen after a short time
7 You should Turn off TV set and remove USB memory and than
7.
turn on again
30

C Vestel Customer Technical Support Department SOFTWARE

Transcription

Similar documents

Dokuman acilmaz ise, İndirmek İçin Tıklayın PDF

proton prevé bukti gabungan kecekapan teknologi proton

penasihat servis

khidmat penyenggaraan dan pembaikan

prihatin

Pusat Servis Wilayah (PSW) Bangi

jilid 1 - SPANCO

bermula aidilfitri ini

Dell Precision 7510 Quick Start Guide

elakkan kemalangan, tingkatkan kesedaran

Kemalangan Jalan Raya Bawa Padah Kepada Mangsa