Micro Powders, Inc.

Transcription

Micro Powders, Inc.

High Performance Wax Additives
Advanced technology with a quality difference
MICRO POWDERS, INC.
Quality, Innovation and Partnership Support Since 1971
About MPI
For reliable quality and superb consistency in wax additives, formulators rely on Micro Powders®,
the recognized leader in advanced wax technology. Our specialty products meet the demanding
requirements of diverse markets, from paints, coatings and printing inks to ceramics, lubricants,
adhesives and more.
Our extensive range of micronized waxes, wax dispersions and wax emulsions brings the right
solution to a vast array of applications, with reliable batch-to-batch consistency and superior
performance values.
Ongoing innovation keeps Micro Powders ahead of the curve in responding to industry trends.
R&D takes place in our Advanced Applications Lab, staffed by chemists with many years
experience in the industries we serve.
The Micro Powders quality assurance system is certified to ISO 9001. Along with our technical
expertise comes dedicated partnership support from our knowledgeable distributors worldwide
and our own staff experts. Our advanced technology will make a quality difference in your
products, and your profits.
Unique Products
Laser Diffraction Analysis ensures consistent particle size uniformity from batch-to-batch. Our wax
additives are easily dispersed without prior melting or grinding. Product groups include:
MP Synthetic Waxes for lubricity and economy
MPP Polyethylene Waxes for rub and mar resistance
Fluo PTFE (Polytetrafluoroethylene) Waxes for high slip, mar and heat resistance
MicroMatte®/PropylMatte/AquaMatte® Waxes for uniform matting and scratch resistance
Micropro Waxes for anti-blocking and gloss control
Polyfluo®/Synfluo Waxes for slip and abrasion resistance
Polysilk® Waxes for improved slip, tape release and smooth surface
Superslip/Synslip/SuperGlide Waxes for high lubricity without PTFE
MicroKlear Waxes for abrasion resistance with gloss retention and clarity
Wax Emulsions for water repellency and moisture resistance
Aqua Waxes for all waterborne applications
Microspersion® Wax Dispersions “stir-in” wax dispersions
PropylTex® Waxes for texture and gloss control
NyloTex Waxes high melt point texture additives
AquaTex® Waxes texture and gloss control in waterborne systems
MicroTouch Products soft touch additives
Special-Effects Products for visual effects
MICRO POWDERS, INC.
High Performance Wax Additives
Advanced technology with a quality difference
MP Synthetic Waxes
Straight chain, fully saturated synthetic hydrocarbon waxes produced by the Fischer-Tropsch process. These products provide extra slip, scratch
and rub resistance. They are effective and economical in most ink, paint and coating systems.
Typical Properties
Melting Point °F
Melting Point °C
Density at 25 °C (g/cc)
NPIRI Grind
Maximum Particle Size (µm)*
Mean Particle Size (µm)*
MP-15
215-223
102-106
0.94
N/A
104.7
20.0-26.0
MP-22VF
215-223
102-106
0.94
2.0-3.5
22.0
6.0-8.0
MP-22
215-223
102-106
0.94
4.0-6.0
31.0
7.0-10.0
MP-22XF
215-223
102-106
0.94
1.5-3.0
22.0
4.5-6.5
MP-22XXF
215-223
102-106
0.94
1.0-2.0
15.56
4.0-5.5
MP-22C
215-223
102-106
0.94
2.0-3.0
22.0
6.0-8.0
MP-28C
219-230
104-110
0.96
3.0-4.0
22.0
6.0-8.0
MPP Polyethylene Waxes
Formulated to provide maximum rub and mar resistance, gloss retention and anti-block properties. Our polyethylene grades are versatile, with
excellent recoatability, and allow higher processing temperatures than synthetic waxes.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
MPP-230F
235-255
113-124
0.94
4.0-5.5
31.0
10.0-12.0
MPP-230VF
235-255
113-124
0.94
3.0-4.0
26.0
8.0-10.0
MPP-308F
237-245
114-118
0.94
4.0-5.5
31.0
10.0-12.0
MPP-308VF
237-245
114-118
0.94
3.0-4.0
26.0
8.0-10.0
MPP-611
228-232
109-111
0.95
2.0-3.0
22.0
5.0-8.0
MPP-611XF
228-232
109-111
0.95
1.0-2.0
22.0
4.0-6.0
MPP-620F
237-241
114-116
0.95
4.0-5.0
31.0
7.0-9.0
MPP-620VF
237-241
114-116
0.95
2.0-3.0
22.0
5.0-7.0
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
MPP-620XF
237-241
114-116
0.95
1.0-2.0
22.0
4.5-5.5
MPP-620XXF
237-241
114-116
0.95
1.0-1.5
15.56
4.25-4.75
MPP-635G
253-257
123-125
0.96
6.0-8.0
31.0
11.0-13.0
MPP-635F
253-257
123-125
0.96
4.0-5.0
31.0
8.0-10.0
MPP-635VF
253-257
123-125
0.96
2.0-3.0
22.0
6.0-8.0
MPP-635XF
253-257
123-125
0.96
1.0-2.5
22.0
4.0-6.0
MPP-1241
253-259
123-126
0.96
N/A
110.0
20.0-25.0
MPP-123
230-235
110-113
0.92
4.0-6.0
31.0
10.0-12.0
Fluo PTFE Waxes
Often used in combination with micronized waxes to achieve higher surface lubricity, anti-blocking properties and lower cost. Our micronized
PTFE (polytetrafluoroethylene) products are heat resistant and insoluble. The Fluo 625F-H and Fluo 750TX are special PTFE grades that provide
various texture effects in powder coatings. Fluo X-1406 contains clusters of sub-micron particles which provide maximum lubricity in inks and
coatings. MicroTex 121 is a combination of PTFE and polyethylene that provides uniform texturing and abrasion resistance in powder coatings.
MicroTex 511 is a specially modified grade for economical texture effect.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Color
Fluo HT
>600
>316
2.2
1.0-2.0
off-white
12.0
2.0-4.0
Fluo HTI-2
>600
>316
2.2
1.0-2.0
off-white
15.56
3.0-5.0
Fluo 300
>600
>316
2.2
1.0-2.0
white
22.0
5.0-6.0
Fluo 300XF
>600
>316
2.2
1.0-2.0
white
15.56
2.0-4.0
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Color
Fluo 750TX
>615
>325
2.2
N/A
white
145.0
20.0-30.0
Fluo X-1406
>600
>316
2.2
N/A
white
22.0
4.0-6.0
<0.3 (primary)
MicroTex® 121
230 – 244
110 – 118
1.02
N/A
off-white
N/A
<100
MicroTex® 511
>600
>316
2.2
N/A
off-white
124.0
20.0-25.0
Fluo 625F-H
>600
>316
2.2
N/A
white
44.0
13.0-21.0
* Laser Diffraction Analysis
Available as a waterborne dispersion
Polyfluo® Waxes
Unique combinations of polyethylene waxes and PTFE that provide a high degree of surface lubricity, abrasion resistance and film toughness.
These proprietary formulations offer a synergistic combination of properties, for superior formulation flexibility in inks, paints, and coatings.
Polyfluo maximizes performance efficiency in low viscosity systems.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Polyfluo 120
225-230
107-110
1.10
3.0-5.0
31.0
6.0-10.0
Polyfluo 150
235-240
113-116
1.15
1.0-2.0
15.56
3.5-5.5
Polyfluo 150XF
235-240
113-116
1.15
1.0-2.0
11.0
3.0-5.0
Polyfluo 190
250-270
121-132
0.99
3.5-5.5
31.0
9.0-12.0
Polyfluo 190S
250-270
121-132
0.99
3.0-4.0
31.0
6.5-8.5
Polyfluo 200
255-259
124-126
1.10
3.0-5.0
31.0
9.0-11.0
Polyfluo 302
226-239
108-115
1.05
1.0-2.0
22.0
5.0-6.0
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Polyfluo 400
226-239
108-115
1.35
1.0-2.0
22.0
5.0-6.0
Polyfluo 400XF
226-239
108-115
1.35
1.0-1.5
11.0
3.0-5.0
Polyfluo 523XF
236-242
113-117
1.26
1.0-2.0
15.56
3.5-5.5
Polyfluo 535
226-239
108-115
1.02
1.0-2.0
22.0
5.0-6.0
Polyfluo 535XF
226-239
108-115
1.02
1.0-1.5
11.0
4.0-5.0
Polyfluo 540
226-239
108-115
1.02
1.0-2.0
22.0
5.0-6.0
Polyfluo 540XF
226-239
108-115
1.02
1.0-1.5
11.0
3.0-5.5
Synfluo Waxes
Special combinations of synthetic wax and PTFE designed to impart high levels of surface lubricity and scratch resistance to printing inks, paints and
coatings. Synfluo is especially recommended for use in high gloss lacquers, can and coil coatings, as well as powder coatings. The Synfluo 283TX
is an ideal texture effect additive for powder coatings.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Synfluo 168VF
219-230
104-110
0.99
4.0-5.0
31.11
8.0-10.0
Synfluo 171VF
219-230
104-110
1.00
2.0-3.0
22.0
4.0-7.0
Synfluo 172VF
219-230
104-110
1.01
1.5-3.0
22.0
4.0-7.0
Synfluo 172XF
219-230
104-110
1.01
1.0-2.5
18.5
3.5-6.0
Synfluo 178VF
219-230
104-110
1.03
1.5-3.0
22.0
4.0-7.0
Synfluo 178XF
219-230
104-110
1.03
1.0-2.0
11.0
3.0-5.0
Synfluo 180VF
219-230
104-110
1.10
1.5-3.0
22.0
4.0-7.0
Synfluo 180XF
219-230
104-110
1.10
1.0-2.0
11.0
3.0-5.0
Synfluo 283TX
219-230
104-110
1.05
4.5-6.5
31.0
8.5-10.5
Polysilk® Waxes
Unique combinations of low molecular weight fatty waxes on a backbone of polyethylene. Polysilk is designed to bloom and provide excellent surface
slip without the use of silicone. These additives give excellent tape release with scuff and mar resistance when used in solvent systems. Polysilk 14 and
Polysilk 600 contain PTFE for added toughness and slip.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Polysilk 14
205-245
96-118
1.04
3.5-4.5
31.0
7.5-9.5
Polysilk 600
205-228
96-109
1.08
2.0-3.0
22.0
5.0-7.0
Polysilk 750
205-228
96-109
0.93
2.0-3.0
22.0
5.0-7.0
MicroKlear Waxes
Formulated with Prime #1 Yellow Refined Carnauba Wax. MicroKlear grades are ideally
suited where excellent slip, gloss and clarity are required. MicroKlear 116 and 295 are
combinations of polyethylene and carnauba. MicroKlear 418 is 100% carnauba wax.
MicroKlear 709 contains PTFE for maximum slip properties.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
MicroKlear 116
225-235
107-113
0.97
1.5-2.5
15.56
4.0-5.0
MicroKlear 295
219-230
104-110
0.97
2.0-3.0
22.0
4.0-6.0
MicroKlear 418
178-187
81-86
0.99
2.0-3.5
22.0
6.0-8.0
MicroKlear 709
246-255
119-124
1.10
2.0-3.0
22.0
4.0-6.0
Micropro Waxes
Modified polypropylene waxes characterized by higher melt points and toughness. These products exhibit excellent surface slip, mar resistance,
anti-blocking and gloss control, while improving metal marking resistance. They are useful for suspending silica additives and provide a
non-abrasive smooth surface. Micropro 440W is specifically formulated for easy incorporation in waterborne systems. Micropro 700 contains
PTFE for maximum slip properties.
Micropro 200
284-289
140-143
0.95
3.0-5.0
31.0
6.0-11.0
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Micropro 400
284-289
140-143
0.93
2.0-3.5
22.0
4.5-7.5
Micropro 500
286-290
141-143
0.94
2.0-3.5
22.0
4.5-7.5
Micropro 440W
302-313
150-156
0.94
3.0-5.0
31.0
7.0-10.0
Micropro 600
295-300
146-149
0.93
3.0-4.0
22.0
6.0-9.0
Micropro 600VF
295-300
146-149
0.93
2.0-3.5
22.0
5.0-8.0
Micropro 700
300-309
149-154
1.04
2.0-3.0
22.0
5.0-7.0
MicroMatte®, PropylMatte and AquaMatte® Waxes
These grades provide uniform and efficient gloss reduction with optimum resistance to burnishing. MicroMatte 1011 UVW and MicroMatte 1213 UVW
are specially modified waxes incorporating microencapsulated inorganics to eliminate flotation, for enhanced stability in waterborne and UV
systems. MicroMatte 2000 is a hybrid polypropylene that reduces gloss while maintaining excellent clarity. PropylMatte 31 and PropylMatte 450 are
produced from 100% polypropylene and provide consistent matting with minimal effect on viscosity. PropylMatte 31HD is a high density version
modified for optimal in-can stability in waterborne systems. AquaMatte products are high density oxidized polyolefins designed for ease of
dispersability and stability in waterborne systems.
Typical Properties
MicroMatte
1011 UVW
MicroMatte
1213 UVW
MicroMatte
2000
PropylMatte
31
PropylMatte
31HD
PropylMatte
450
AquaMatte
22
AquaMatte
26HD
AquaMatte
31
Melting Point °F
Melting Point °C
NPIRI Grind
302-313
150-156
1.07
2.0-3.5
22.0
5.0-7.5
302-313
150-156
1.11
2.0-3.5
22.0
5.0-7.5
295-300
146-149
0.94
2.0-4.0
22.0
6.0-9.0
320-338
160-170
0.89
5.0-6.0
31.0
8.0-12.0
320-338
160-170
1.07
5.0-6.0
31.0
8.0-12.0
288-298
142-148
0.90
5.0-6.0
31.0
8.0-12.0
274-284
135-140
0.99
2.0-3.0
22.0
6.0-8.0
221-232
105-111
1.07
3.0-4.0
26.0
6.0-8.5
274-284
135-140
0.99
5.0-6.0
31.0
8.0-12.0
Superslip, Synslip and SuperGlide Waxes
Combinations of polyolefins and amides designed to impart increased lubricity, scratch resistance and anti-blocking without the use of PTFE.
They also impart an excellent “feel” or smoothness to a coating.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Superslip 6515
255-278
124-137
0.95
2.0-3.0
22.0
6.0-8.0
Superslip 6515XF
255-278
124-137
0.95
1.0-2.0
15.56
4.0-6.0
Superslip 6520
275-289
135-143
0.96
2.0-3.0
22.0
6.0-8.0
Superslip 6525
275-291
135-145
0.95
2.0-3.5
22.0
5.0-8.0
Superslip 6530
255-275
124-135
0.95
2.0-3.5
22.0
6.0-7.5
Synslip 3750
275-289
135-143
0.95
2.0-3.5
22.0
5.0-7.0
Synslip 3780
275-289
135-143
0.96
2.0-4.0
22.0
5.0-8.0
SuperGlide 904
280-293
138-145
0.97
2.0-4.0
22.0
4.0-7.0
SuperGlide 904XF
280-293
138-145
0.97
1.0-2.0
15.56
3.0-5.0
Micromide Waxes
AquaBead® Waxes
Finely micronized vegetable derived EBS waxes. Our Micromide
grades feature extremely fine particle control with excellent blooming
properties. These waxes provide surface slip, scratch and mar
resistance as well as some gloss control.
Finely micronized wax polymers specifically formulated to produce a
water “beading” effect. These unique powder compositions combine
the synergistic properties of several waxes to produce immediate,
consistent and long-lasting water beading and weather resistance.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Typical Properties
Softening Point °F
Softening Point °C
Melting Point °F
Melting Point °C
NPIRI Grind
Micromide 520
286-293
141-145
0.97
1.5-3.0
22.0
5.0-8.0
Micromide 520XF
286-293
141-145
0.97
1.0-2.0
15.56
3.0-5.0
AquaBead 519
140-145
60-63
259-270
126-132
0.91
2.0-3.0
22.0
6.0-8.0
AquaBead 916
147-153
64-67
262-270
128-132
0.93
1.5-2.5
22.0
7.0-9.0
Aqua Waxes
Specifically modified for easy incorporation and stability in waterborne inks, paints and coatings. Aquawax 214 and Aquawax 214VF are hard,
high melt point micronized synthetic waxes. AquaPoly 215 grades are economical polyethylene waxes. AquaPoly 250 is a hard, high density and
high molecular weight polyethylene polymer that imparts excellent scratch, rub and mar resistance, while reducing potential wax defoamer
kickout. AquaPolyfluo 411 and AquaPolysilk 19 contain PTFE for increased lubricity and scratch resistance. AquaSuperslip 6550 imparts
maximum lubricity and block resistance.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Aquawax 214
220-225
104-107
0.96
4.0-6.0
31.0
9.0-11.0
Aquawax 214VF
220-225
104-107
0.96
2.0-3.5
22.0
5.0-7.5
AquaPoly 215
221-232
105-111
0.95
5.0-6.0
31.0
9.0-11.0
AquaPoly 215F
221-232
105-111
0.95
3.0-4.0
26.16
6.0-8.5
AquaPoly 215VF
221-232
105-111
0.95
2.0-3.5
22.0
5.0-7.5
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
AquaPoly 250
243-253
117-123
0.98
4.0-5.0
31.0
8.0-10.0
AquaPolyfluo 411
243-253
117-123
1.10
2.5-3.5
22.0
6.0-8.0
AquaPolysilk 19
215-245
102-118
1.06
3.5-4.5
31.0
9.0-11.0
AquaSuperslip 6550
255-275
124-135
0.94
2.0-3.5
22.0
5.0-7.5
Wax Emulsions
Sub-micron aqueous emulsions formulated using a combination of waxes. The AquaBead grades are designed to produce a water beading effect as well
as long-lasting water repellency in aqueous paints, stains, and coatings. The AquaKlean grades provide excellent scrubbability and burnish resistance in
architectural interior and exterior wall paints, coatings, stains, and sealers. Microspersion 91E is a polypropylene emulsion designed to increase COF in
waterborne floor finishes, inks, and OPV’s. Microspersion 504E is a large particle size PE emulsion for aqueous inks and coatings. Microspersion 526E is a
modified PE emulsion that provides optimum surface protection while maintaining excellent gloss and film clarity.
Typical Properties
Solids
Viscosity at 25°C (cP)
pH
Freeze/Thaw Stability
AquaBead 270E
40.0%
500
10.0
Moderate***
Density at 25 °C (g/cc) 0.95
AquaBead 325E
63.0%
100
8.5
No***
AquaBead 525E
30.0%
500
10.5
Moderate***
AquaBead 525E-AM
30.0%
500
10.5
Excellent***
AquaKlean 402
30.0%
500
10.5
Excellent***
AquaKlean 403
30.0%
100
9.5
Moderate***
AquaKlean 418
35.0%
50
5.0
Good***
Microspersion 91E
40.0%
50
9.0
Moderate***
Microspersion 504E
40.0%
500
8.5
Moderate***
Microspersion 526E
25.0%
<50
9.5-10.5
Moderate***
0.93
0.97
0.97
0.97
0.99
1.00
0.99
0.99
0.98
*** Protect From Freezing
Microspersion® Wax Dispersions
Aqueous dispersions of Micro Powders micronized waxes. Designed for ease of incorporation and optimum performance, the Microspersion
grades enable the use of highly efficient micronized waxes in a liquid form. The products listed below include some of our more popular grades.
For a complete listing visit our website.
Typical Properties
Dry Wax ID
Wax Solids
Resin Type/Solids
Total Solids
pH
NPIRI Grind
Mean Particle
Size (µm)
Microspersion 19
Aquapolysilk 19
25.0%
Acrylic/12.3%
37.3%
8.5
4500
1.02
4.0-5.0
9.0-11.0
Microspersion 22-50
MP-22
50.0%
None
52.5%
9.0
3500
0.95
4.0-6.0
7.0-10.0
Typical Properties
Dry Wax ID
Wax Solids
Resin Type/Solids
Total Solids
pH
NPIRI Grind
Mean Particle
Size (µm)
Microspersion 411-50
AquaPolyfluo 411
50.0%
None
52.5%
9.0
2500
1.04
5.0-6.0
6.0-8.0
Microspersion 22AQ-50
AquaMatte 22
50.0%
None
50.9%
7.5
3000
1.00
2.0-3.0
6.0-8.0
Microspersion 440W
Micropro 440W
40.0%
Acrylic/8.9%
48.9%
8.5
1000
1.02
4.0-5.0
7.0-10.0
Microspersion 31HD-40
PropylMatte 31HD
40.0%
None
42.1%
8.5
4000
1.03
5.0-6.0
8.0-12.0
Microspersion 520
Micromide 520
34.0%
None
34.0%
10.0
75
1.00
NA
5.0-8.0
Microspersion 523
Polyfluo 523XF
40.0%
None
42.5%
10.0
1500
1.09
1.0-2.5
3.5-5.5
Microspersion 31AQ-50
AquaMatte 31
50.0%
None
51.5%
7.0
3000
1.00
5.0-6.0
8.0-12.0
MPP-620VF
50.0%
None
52.0%
8.0
4000
0.99
2.5-3.5
5.0-7.0
Polyfluo 190
50.0%
None
52.5%
9.0
5500
1.00
3.0-5.0
9.0-12.0
Microspersion 930
PE Hybrid
35.0%
None
35.5%
9.5
1500
0.98
5.0-6.0
9.0-11.0
AquaPoly 215
50.0%
None
51.0 %
7.5
3000
0.95
4.0-6.0
9.0-11.0
Microspersion 1406
Fluo X-1406
50.0%
None
52.6%
7.5
4000
1.40
0
<1.0
AquaPoly 250
50.0%
None
50.0%
8.5
5000
1.02
5.0-6.0
8.0-10.0
Microspersion HT
Fluo HT
50.0%
None
54.5%
9.0-10.5
6000
1.50
1.0-2.0
2.0-4.0
PropylTex® Waxes
Micronized polypropylene designed to produce unique texturizing effects in paints and coatings. The low density and insolubility characteristics of PropylTex will reduce
or eliminate settling and provide optimum durability in both waterborne and solvent systems. Coarse PropylTex grades are ideal for walking surfaces and other nonskid
coating applications. Finer particle size grades can be used to reduce gloss in higher film build coatings.
Typical Properties
Melting Point °F
Melting Point °C
Maximum Particle Size (µm)**
PropylTex 14
330-335
166-168
0.90
1410.0
(14 mesh)
N/A
PropylTex 20
330-335
166-168
0.90
840.0
(20 mesh)
270.0-300.0
PropylTex 30
330-335
166-168
0.90
594.0
(30 mesh)
N/A
PropylTex 50
330-335
166-168
0.90
300.0
(50 mesh)
160.0-180.0
PropylTex 100S
320-338
160-170
0.89
149.0
(100 mesh)
80.0-100.0
PropylTex 140S
320-338
160-170
0.89
105.0
(140 mesh)
45.0-55.0
PropylTex 200S
320-338
160-170
0.89
74.0
(200 mesh)
35.0-45.0
PropylTex 200SF
320-338
160-170
0.89
74.0
(200 mesh)
25.0-35.0
PropylTex 230S
320-338
160-170
0.89
63.0
(230 mesh)
36.0-40.0
PropylTex 270S
320-338
160-170
0.89
53.0
(270 mesh)
15.0-25.0
PropylTex 325S
320-338
160-170
0.89
44.0
(325 mesh)
11.0-15.0
Narrow Mean Particle Range(s) Available
AquaTex® and NyloTex Waxes
AquaTex grades are based on high density oxidized polyethylene. They are ideally suited for waterborne texturizing applications where excellent dispersibility and reduced
flotation are desired. NyloTex grades are micronized polyamide (Nylon 6) that exhibit a higher melt point than standard polyolefins, making them ideal for higher
temperature texture applications. NyloTex grades offer exceptional wear and durability in performance coatings.
Typical Properties
Melting Point °F
Melting Point °C
AquaTex 100
274-284
135-140
0.99
149.0
(100 mesh)
80.0-100.0
AquaTex 140
274-284
135-140
0.99
105.0
(140 mesh)
45.0-55.0
AquaTex 230
274-284
135-140
0.99
63.0
(230 mesh)
36.0-40.0
AquaTex 200
274-284
135-140
0.99
74.0
(200 mesh)
35.0-45.0
AquaTex 270
274-284
135-140
0.99
53.0
(270 mesh)
15.0-25.0
AquaTex 325
274-284
135-140
0.99
44.0
(325 mesh)
11.0-15.0
NyloTex 20
425-435
218-224
1.14
840.0
(20 mesh)
N/A
NyloTex 50
425-435
218-224
1.14
300.0
(50 mesh)
160-180
NyloTex 140
425-435
218-224
1.14
105.0
(140 mesh)
45.0-65.0
NyloTex 200
425-435
218-224
1.14
74.0
(200 mesh)
30.0-50.0
MicroTouch Products
Based on polyurethane technology, these highly resilient products can be used to modify and enhance the tactile properties of a
coatings system from satiny smooth to leathery to rubbery. MicroTouch additives will provide a matte appearance and deliver
excellent scratch, burnish, and mar resistance.
Typical Properties
Maximum Particle Size (µm)
Mean Particle Size (d50, µm)
MicroTouch 800F
1.05
120.0
25.0-35.0
MicroTouch 800VF
1.05
60.0
12.0-16.0
MicroTouch 800XF
1.05
31.0
7.0-9.0
MicroTouch 850XF
1.02
31.0
5.0-8.0
Special-Effects Products
Micro Powders offers a wide variety of colored beads for special effects in multi-color paints and coatings. Applications include architectural wall
paint, aerosol paint, floor finishes and craft paint. MicroGranite 100, a unique combination of pigmented polymers, imparts a granite-like effect to
all types of paints and coatings.
Typical Properties
Melting Point °F
Melting Point °C
Color/Appearance
MicroGranite 100
239-248
115-120
0.99
Granite
149.0
(100 mesh)
85.0-115.0
MicroBlack 1005
250-261
121-127
0.99
Black
149.0
(100 mesh)
95.0-115.0
MicroWhite 1005
250-261
121-127
0.99
White
149.0
(100 mesh)
95.0-115.0
MicrospeX Products
248-284
120-140
0.90
Various
1680.0
(12 mesh)
N/A
x
x
MicrospeX products are available in the
following colors: Millstone, Sandstone,
Pink Granite and Green Marble.
Specialty Products
These specialty grades fulfill a wide variety of end uses. PolyBlends offer unique combinations of micronized polyethylene and PTFE waxes.
Propylfluo 824 optimizes the toughness of polypropylene in combination with PTFE. NyloFine 1000 is a fine particle size aromatic polyamide
powder designed for high specification abrasion resistance. Microscrub 50 is a coarse particle size polyethylene exfoliating agent for industrial hand
cleaners. Microspersion EZ is an advanced wetting and dispersing agent for waterborne systems based on proprietary surfactant technology.
Typical Properties
Melting Point °F
Melting Point °C
NPIRI Grind
Polyblend 100XF
230-240
110-116
1.02
1.0-2.0
22.0
4.0-6.0
Polyblend 200XF
253-257
123-125
1.02
1.0-2.0
22.0
5.0-6.0
Propylfluo 824
302-320
150-160
1.04
2.0-3.0
22.0
5.0-7.0
Nylofine® 1000
>534
>279
1.19
N/A
31.0
6.0-10.0
Microscrub® 50
225-229
107-109
0.95
N/A
297.0
N/A
Typical Properties
Active Content
Viscosity
Microspersion® EZ
~50%
300-500 cps
** Typical Values By Screen Analysis
What’s Your Application?
Benefits
Performa
nce
Benefits
Polishes
Rubber A
UV & EB
Solvent
Aqueous
Solvent
Aqueous
Aqua Waxes
dditives
Miscellaneous
Lubricants
Lacquers
ts
ral
Architectu
Trim Pain
ood
Stains
Floor
Wood
Solvent: W
Aqueous:
Powder
etal
Solvent: M
tainer
Metal
Aqueous:
Can & Con
Ultraviole
Heat Set
t
Fed
n
Publicatio
IR/Sheet
aper
Paper
Paint & Coatings
Offset Inks
Solvent: P
ilm
Solvent: F
Aqueous:
Film
Aqueous:
Liquid Inks
S A HR M G
AquaBead Wax
Emulsions
AquaBead Waxes
WSMG
WSMG
AquaKlean Wax
Emulsions
WSMGA
Fluo Waxes
S T MM HR GC
MicroKlear Waxes
SAMG
MicroMatte &
PropylMatte Waxes
GC MM A H
Micromide Waxes
S GC M
Micropro Waxes
GC MM A
Microspersion Wax
Dispersions
S M HR MM
MicroTouch Products
GC A T M
MP Synthetic Waxes
SHAW
MPP Polyethylene
Waxes
Polyfluo Waxes
A M MM H
S A HR G H
Polysilk Waxes
SAW
Superslip, Synslip &
SuperGlide Waxes
S A M H GC
Synfluo Waxes
S A HR G H
PropylTex, AquaTex &
NyloTex
T M GC H
Addition Level Key: Percentage is based on total formula weight
= 0.25 - 1.0%
= 2.0 - 3.0%
= 1.0 - 2.0%
= Above 3.0%
= 1.0 - 3.0%
Benefits Key:
S
A
GC
H
T
= Slip / Lubricity
= Abrasion Resistance
= Gloss Control
= Hardness
= Texture
M = Mar Resistance
MM = Metal Marking
HR = Heat / Blocking Resistance
G = Gloss Retention
W = Water Repellency
The data contained in this brochure are considered typical properties and are not to be considered specifications. Please contact Micro Powders directly for official product specifications.
MICRO POWDERS, INC.
www.micropowders.com
MPI Quality Program Certified to ISO 9001
580 White Plains Road, Tarrytown, New York 10591 • Tel: (914) 793-4058, Fax: (914) 472-7098 • Email: [email protected]
The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are beyond our control. Micro Powders, Inc.
disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.
04/15
MICRO POWDERS, INC.
ADDITIVES FOR TEXTURE COATINGS
PROPYLTEX WAXES
PropylTex is a product series based on micronized polypropylene, and is our most comprehensive line of texturing agents. The coarser
grades of PropylTex provide a range of texture effects varying from subtle to aggressive, while the finer grades are often used to reduce gloss,
especially in applications with a high dry film thickness. These finer grades are superior to silica-based additives as they do not affect coating rheology and provide substantially better resistance to burnishing and abrasion. For even finer gloss reduction grades, please refer to our
PropylMatte products.
PropylTex will also impart a smoother surface feel when compared to inorganic texturing agents. The low density of polypropylene
provides an additive that will not settle as with silica-based products. These factors, along with a high degree of solvent resistance, make
PropylTex an excellent choice for all solvent based coating systems, including those containing aromatic solvents.
Coarse grades of PropylTex provide a non-skid surface effect with a higher COF compared to other polymeric texturing agents,
making them the perfect choice for coatings designed for walking surfaces.
PropylTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:
• Concrete and floor coatings.............................................PropylTex 20, 30, 50, 100S and 140S*
• Wood coatings.................................................................PropylTex 200S, 200SF, 230S* and 270S*
• Interior architectural coatings..........................................PropylTex 100S, 140S*
• Laminated board coatings...............................................PropylTex 200S, 230S* and 270S*
• OEM metal coatings........................................................PropylTex 140S*, 200S and 230S*
• Matte finishes for plastics................................................PropylTex 270S* and 325S
* Special Narrow Mean Particle Size
Ranges Also Available.
PropylTex 20
PropylTex 30
PropylTex 50
PropylTex 100S
PropylTex 140S
Mesh Size: 20
Particle Size (μm):
Maximum 840
Mean 270-300
Melt Point: 166-168°C
Mesh Size: 30
Maximum 595
Mean 235-255
Mesh Size: 50
Maximum 300
Mean 160-180
Mesh Size: 100
Maximum 149
Mean 80-100
Mesh Size: 140
Maximum 105
Mean 45-55
Density: 0.90 g/cc
Density: 0.90 g/cc
Density: 0.90 g/cc
Density: 0.89 g/cc
Density: 0.89 g/cc
PropylTex 200S
PropylTex 200SF
PropylTex 230S
PropylTex 270S
PropylTex 325S
Mesh Size: 200
Maximum 74
Mean 35-45
Mesh Size: 200
Maximum 74
Mean 25-35
Mesh Size: 230
Maximum 63
Mean 36-40
Melt Point: : 160-170°C
Mesh Size: 270
Maximum 53
Mean 15-25
Mesh Size: 325
Maximum 44
Mean 11-15
Density: 0.89 g/cc
Density: 0.89 g/cc
Density: 0.89 g/cc
Density: 0.89 g/cc
Density: 0.89 g/cc
continued on next page
AQUATEX WAXES
AquaTex is a product series based on micronized oxidized polyethylene, making it especially useful in waterbased systems. The density of AquaTex
is nearly identical to water (1.0), resulting in a product that does not settle and has minimal to no flotation, depending on coating viscosity. The oxidative functionality of AquaTex makes incorporation into waterbased systems easier and faster.
AquaTex is offered in many different particles sizes to provide the texture effect you desire. The finer particle size grades of AquaTex will provide
optimum abrasion resistance, gloss control, and will be less abrasive when compared to silica. For even finer gloss reduction grades, please refer to
our AquaMatte products. AquaTex grades also provide scratch and burnish resistance, making them an excellent choice for architectural coatings.
AquaTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:
• Interior architectural wall paints........................................AquaTex 230, 270 and 325
• Micro-texture overprint varnishes for packaging............. AquaTex 270 and 325
• General industrial and maintenance texture paints..........AquaTex 100, 140 and 200
• Various matte waterborne finishes...................................AquaTex 230, 270 and 325
• General gloss reduction....................................................AquaTex 270 and 325
AquaTex 100
AquaTex 140
AquaTex 200
AquaTex 230
AquaTex 270
AquaTex 325
Mesh Size: 100
Mesh Size: 140
Mesh Size: 200
Mesh Size: 230
Mesh Size: 270
Mesh Size: 325
Maximum 149
Maximum 105
Maximum 74
Maximum 63
Maximum 53
Maximum 44
Mean 80-100
Mean 45-55
Mean 35-45
Mean 30-40
Mean 15-25
Mean 10-15
Melt Point: 135-140°C Melt Point: 135-140°C Melt Point: 135-140°C Melt Point: 135-140°C Melt Point: 135-140°C Melt Point: 135-140°C
Density: 0.99 g/cc
Density: 0.99 g/cc
Density: 0.99 g/cc
Density: 0.99 g/cc
Density: 0.99 g/cc
Density: 0.99 g/cc
NYLOTEX WAXES
NyloTex is a product series based on micronized polyamide (Nylon 6). NyloTex provides the highest melting point of any of
our texture additives, making it suitable for higher temperature applications. NyloTex will impart a consistent texture at high
baking temperatures in applications that include coil and powder coatings.
For gloss reduction in high temperature coatings, please inquire about our Nylofine 1000 additive.
NyloTex grades are commonly added at levels from 3% to 10% based on total formula weight in the following applications:
• Concrete and floor coatings.............................................NyloTex 20, 50 and 140
• Coil and powder coatings................................................NyloTex 200
• Topcoats for seamless vinyl and composite flooring.......NyloTex 200
• Slip resistant, high film build coatings............................ NyloTex 20 and 50
NyloTex 20
NyloTex 50
NyloTex 140
NyloTex 200
Mesh Size: 20
Maximum 840
Mean 270-300
Mesh Size: 50
Maximum 300
Mean 160-180
Mesh Size: 140
Maximum 105
Mean 45-65
Mesh Size: 200
Maximum 74
Mean 30-50
Density: 1.14 g/cc
Density: 1.14 g/cc
Density: 1.14 g/cc
Density: 1.14 g/cc
ADDITIVES FOR
Contact us for a complete brochure which includes
TEXTURE
COATINGS
sample chips for each of the products that are listed.
MICRO POWDERS, INC.
580 White Plains Road, Tarrytown, New York 10591
MICRO POWDERS, INC.
•
Tel: (914) 793-4058, Fax: (914) 472-7098
•
Email: [email protected]
The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are beyond our control. Micro Powders, Inc. disclaims
any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.
1-09/15
MicroTouch
Soft Touch Coating Additives
INTRODUCTION
Formulation Guide
Coating formulators now have the ability to modify the tactile
surface properties of their products with MicroTouch. Based
on aliphatic polyurethane technology, MicroTouch additives
are micron-sized elastic particles that distort when disturbed by
a physical force (such as finger touch or abrasive action) and
then return to their original spherical shape when the force is
removed. These products can be used in combination with many
different types of coating resins to achieve effects that range from
satiny smooth to leathery to rubbery. MicroTouch additives are
highly resilient particles that can be used to modify and enhance
the feel of a coating surface. These additives will provide a
matte appearance as well as superior scratch, burnish, and mar
resistance. MicroTouch additives are available in several particle
sizes, each of which brings different tactile properties. MicroTouch
additives are an ideal alternative to formaldehyde-based materials
such as polyureas.
MicroTouch additives will improve chemical resistance and
hydrolytic stability. Taber abrasion resistance can be dramatically
improved with an addition of 2-3% of MicroTouch.
MicroTouch additives can be used to modify coatings designed for
plastics, metals, paper, wood, leather, and other textiles. Common
industrial applications include electronics (computers, laptops,
mobile phones), automotive interiors, wall coverings, parquet
and vinyl flooring, inks, and furniture.
FORMULATION NOTES
It is important to understand that the ultimate “feel” of a coating
formulated with MicroTouch is highly dependent on the choice
of resin system. Harder resin systems formulated with MicroTouch
will provide a surface with a smooth, satiny feel. Softer resin systems
can provide surfaces that have a rubbery, anti-slip feel. Lower
percentages (2-6%) of MicroTouch will provide gloss reduction and
abrasion resistance with limited tactile effects. At higher percentages
(6-10%), more pronounced tactile properties can be achieved.
The formulated examples presented in this brochure demonstrate
some of the tactile effects that can be achieved by combining
MicroTouch additives with different types of coating resins. These
examples should not be considered as fully formulated commercial
coatings. They are presented strictly to show the range of soft
touch effects that can be achieved.
PROCESSING NOTES
MicroTouch additives are virtually indestructible and are easy to
incorporate into coatings with an impeller disk disperser such as
a Conn ITT blade (or similar). A tip speed of around 3-3.5 m/s
should be sufficient to wet and disperse the product into a coating.
In solvent based systems, additional shear energy may be required
to disperse and deagglomerate the product.
HIGH TEMPERATURE AND SOLVENT BASED
APPLICATIONS
MicroTouch additives are suitable for applications with curing
temperatures up to100-120 °C. For applications in the120-140 °C
range, the products may show some yellowing. Applications
exceeding 140 °C are not recommended as the particles will swell
and/or stick together.
MicroTouch additives will swell and absorb solvent if slurried
directly into alcohol (ethanol, isopropanol) or other highly polar
solvents. They should instead be dispersed into the alcohol based
resin system to disperse and stabilize the particles.
MicroTouch additives should not be used in coating systems
based on dimethylformamide (DMF) as the particles will swell
significantly.
PRODUCT GUIDE
MicroTouch
800F
MicroTouch
800VF
MicroTouch
800XF
MicroTouch
850XF
Density @ 77 °F (25 °C)
1.05
1.05
1.05
1.02
Maximum Particle Size (μm)
120
60
31
31
Mean Particle Size (d50, μm)
22-30
11-15
6-9
5-9
Typical Properties
page 1
FORMULAS
Pebbly Feel Using MicroTouch 800F
Formula:
AlberdingkUSA® U 2101
MicroTouch 800F
Total:
Wt %:
92.6%
7.4%
100.0%
Product:
Supplier:
60.5% solids PUD
Alberdingk-Boley
polymeric additive
Micro Powders, Inc.
(wet applied film thickness: 0.003"; 76μm)
Fuzzy Feel Using MicroTouch 800VF
Formula:
Wt %:
Product:
Supplier:
Witcobond® W-505
92.6%
40.0% solids PUD
Chemtura
MicroTouch 800VF
7.4%
polymeric additive
Micro Powders, Inc.
Total:
100.0%
Rubbery Feel Using MicroTouch 800XF
Formula:
Bayhydrol® UH 240
MicroTouch 800XF
Total:
Wt %:
45.5%
45.5%
9.0%
100.0%
Product:
Supplier:
60.5% solids PUD
Alberdingk-Boley
40.0% solids PUD
Bayer
polymeric additive
Micro Powders, Inc.
Silky Feel Using MicroTouch 850XF
Formula:
Urotuf® L63-MPW-38
MicroTouch 850XF
Total:
Wt %:
26.0%
61.0%
13.0%
100.0%
Product:
Supplier:
60.5% solids PUD
Alberdingk-Boley
38.0% solids PUD
Reichhold Inc.
polymeric additive
Micro Powders, Inc.
GLOSS REDUCTION DATA
Pebbly
MT = MicroTouch Control
Fuzzy
Rubbery
Silky
w/MT
Control
w/MT
Control
w/MT
Control
w/MT
% additive*:
0
7.4
0
7.4
0
9
0
13
Gloss 20°
15
7
56
1
18
1
4
0.5
Gloss 60°
52
27
83
7
52
9
27
5
Gloss 85°
66
22
93
4
79
30
80
30
*Based on total formula weight
Micro Powders, Inc.
page 2
580 White Plains Rd Tarrytown, NY 10591 Tel: (914) 793-4058 Email: [email protected] Web: micropowders.com
04/15
High-performance Wax Additives for
Architectural
Paints & Coatings
MICRO POWDERS, INC.
Architectural Applications
Micro Powders, Inc., the recognized leader in innovative wax technology, prides itself in developing unique additives to meet
the demands of its customers and their varied applications. This bulletin highlights a broad range of products which will
enhance the appearance and performance of architectural paints and coatings. The key performance benefits and
recommended addition levels of selected products are provided. The typical method of incorporation is to add Micro
Powders’ micronized waxes to the formula at the let-down stage (no extra milling or grinding required). We also offer
aqueous dispersions of our micronized waxes where a liquid product is preferred.
Interior
Interior paints require burnish resistance and in many cases, gloss reduction
along with washability. These products provide those attributes while exhibiting
a low demand for vehicle – an important factor for the new low VOC paints.
PropylTex Series
A full range of highly durable polypropylene texture additives that are used in wall paints to create unique structure
effects.
AquaTex Series
High molecular weight oxidized polyolefin texture and
matting additives for waterborne paints. Available in a full
range of particle sizes for custom texture effects.
AquaMatte® 31 / AquaMatte® 22
High molecular weight oxidized polyolefins for optimum
gloss reduction and smooth film characteristics.
PropylMatte 31
Micronized polypropylene for optimum mar and burnish resistance in waterborne wall and trim paints. Lightweight replacement for inorganic fillers. Very low demand for vehicle.
AquaKlean Series
Aqueous wax emulsions for water repellency, stain
resistance and washability when used in waterborne wall
and trim paints.
Wood & Concrete Sealers
Micronized waxes from Micro Powders are essential ingredients in these systems, which include waterborne and solvent concrete sealers and exterior wood protection products. Water beading is quick and dramatic with a long lasting effect.
MP-22 / MP-22XF
Synthetic paraffin wax for exterior wood stains to increase
the longevity of the water beading effect.
Micropro 400
Unique, modified polypropylene wax for weather protection and resistance to chalking in lower gloss applications.
AquaBead® Series
Aqueous wax emulsions for water repellency and stain
resistance in waterborne wood and concrete sealers.
PropylMatte 31 / PropylMatte 450
High molecular weight polypropylene that imparts excellent gloss control and scuff resistance in wood and concrete floor sealers.
PropylTex 20 / PropylTex 50
Extremely durable 20 and 50 mesh polypropylene for all
types of non-slip wood and concrete floor finishes. These
light weight wax polymers easily stir into paints and will
not settle.
*see recommended addition levels on the back cover
Exterior
Exterior paints and sealers are often very soft because of the low VOC content and
required coalescing properties. Micro Powders’ micronized waxes can add apparent
hardness and soil rejection without raising viscosities or increasing the demand for
vehicle. These waxes can actually improve long-term chalking properties.
Micropro 400
Modified polypropylene
wax for scuff resistance and
matting in lower gloss
applications.
AquaTex Series
A full range of oxidized polyolefins in various particle
sizes for custom texture effects.
AquaBead® 519
Specially formulated blend of natural and synthetic
waxes for immediate and long-term water repellency.
Trim
Both interior and exterior trim paints demand excellent gloss and block resistance. In some cases, low gloss is required.
These Micro Powders’ waxes are ideal for improving these properties while not affecting viscosities.
AquaPolyfluo 411
Micronized, modified polyolefin wax
combined with PTFE. Ideal for interior
trim paints to maintain gloss and
improve block resistance.
AquaPoly 215VF
Unique, economical oxidized
polyethylene wax for smooth feel
and block resistance in waterborne
trim paints. Excellent scrubability.
Polyfluo® 190
Low density, high molecular weight
polyethylene combined with PTFE to
impart block and abrasion resistance in
gloss to semi-gloss trim paints.
Aquawax 214
Oxidized, micronized synthetic wax
suitable for exterior trim and joinery
paints.
Varnishes
These clear systems are very popular for use on floors, trim, furniture and other DIY applications. Micronized waxes are
used for toughness, scratch resistance, smoothness to the hand, clarity and gloss reduction. A wide variety of products are
available from Micro Powders.
Polyfluo® 190
Low density, high molecular weight polyethylene
combined with PTFE for optimum abrasion resistance
without slip. Ideal for wood floors.
PropylMatte 31
High molecular weight polypropylene that imparts excellent gloss control and scuff resistance in wood floor finishes.
SuperGlide 904
Modified amide wax for scratch and mar resistance along
with a silky surface feel.
Synfluo 172VF
Cost effective combination of synthetic wax and PTFE.
Imparts an abrasion resistant surface while maintaining
gloss and a smooth feel.
AquaMatte® 31 / AquaMatte® 22
High molecular weight oxidized polyolefins that impart
excellent gloss reduction and scratch resistance in all types
of wood varnishes. AquaMatte 22 provides good clarity
and a smooth surface feel.
MicroMatte® 1213 UVW / 1011 UVW
Unique, modified polypropylene wax that provides
excellent scratch resistance, smooth surface feel and gloss
reduction. Densified to eliminate flotation.
About Micro Powders
Micro Powders, Inc. has been developing and manufacturing innovative
speciality micronized waxes, wax dispersions and emulsions since 1971. Today
we offer more than 150 state-of-the-art products specifically created for the
paint, printing ink and coatings markets. These sophisticated wax additives help
formulators develop enhanced surface coatings.
Product Highlights
Wax Type(s)
Melt Point (°C)
Density
(g/cc@25°C)
*Mean Particle
Size (microns)
*Maximum Particle
Size (microns)
**Recommended
Addition Levels
Emulsion
N/A
0.94-0.96
N/A
N/A
3.0-10.0%
Combination
126-132
0.91
6.0-8.0
22.0
1.0-4.0%
Emulsion
N/A
0.96-0.99
N/A
N/A
3.0-10.0%
AquaMatte 22
Oxidized Polyethylene
135-140
0.99
6.0-8.0
22.0
2.0-5.0%
AquaMatte® 31
135-140
0.99
8.0-12.0
31.0
2.0-5.0%
AquaPoly 215VF
Polyethylene
105-111
0.95
5.0-7.5
22.0
0.5-2.0%
AquaPolyfluo 411
PE/PTFE
117-123
1.10
6.0-8.0
22.0
0.5-2.0%
135-140
0.99
Product
AquaBead® Series
AquaBead 519
®
AquaKlean Series
®
AquaTex Series
Aquawax 214
wide range available
5.0-10.0%
Synthetic
104-107
0.96
9.0-11.0
31.0
0.5-1.5%
®
MicroMatte 1011 UVW
Polypropylene
150-156
1.07
5.0-7.5
22.0
2.0-4.0%
MicroMatte® 1213 UVW
Polypropylene
150-156
1.11
5.0-7.5
22.0
2.0-5.0%
Micropro 400
Polypropylene
140-143
0.93
4.5-7.5
22.0
2.0-4.0%
MP-22
Synthetic
102-106
0.94
7.0-10.0
31.0
1.0-3.0%
MP-22XF
Synthetic
102-106
0.94
4.5-6.5
22.0
1.0-3.0%
Polyfluo® 190
PE/PTFE
121-132
0.99
9.0-12.0
31.0
1.0-2.0%
PropylMatte 31
Polypropylene
160-170
0.89
8.0-12.0
31.0
2.0-4.0%
PropylMatte 450
Polypropylene
142-148
0.90
8.0-12.0
31.0
2.0-5.0%
PropylTex 20
Polypropylene
166-168
0.90
270.0-300.0
840.0
3.0-10.0%
PropylTex 50
Polypropylene
166-168
0.90
160.0-180.0
300.0
3.0-10.0%
PropylTex Series
Polypropylene
160-170
0.89-0.90
SuperGlide 904
PE/Amide
138-145
0.97
4.0-7.0
22.0
0.5-3.0%
Synfluo 172VF
Synthetic/PTFE
104-110
1.01
4.0-7.0
22.0
0.5-2.0%
3.0-10.0%
*Laser diffraction analysis. **Based on total formula weight.
The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use are
beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as a recommendation to infringe on any existing patents covering any material or its use.
MICRO POWDERS, INC.
580 White Plains Road • Tarrytown • New York 10591 TEL 914-793-4058 • FAX 914-472-7098 • EMAIL [email protected]
2AC0313
Industrial Coatings
Industrial Coatings
At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce
superior technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders®
wax additive, which will provide a variety of enhancements to various types of industrial coatings for metals and plastics.
The recommended addition levels* and some of the key performance benefits of selected products are included in this
brochure. The typical method of incorporation is to add the micronized wax to the formula in the mixing or let-down
stage. A predispersion of wax may also be produced to allow for easy addition to any portion of the formula.
Abrasion Resistance & Lubricity
Wax additives are often the first line of defense against abrasion
of the coating. They have also been proven extremely effective
at providing increased lubricity to waterborne, solventborne and
high-solids industrial coatings.
AquaPoly 250
Improved abrasion resistance and easy incorporation in
waterborne topcoats for steel substrates.
MPP-615VF / MPP-620VF
Abrasion resistance and improved hardness in solventborne industrial coatings.
MPP-645VF / MPP-1241
Excellent abrasion resistance in heavy duty solvent
based coatings. Good resistance to aromatic solvents.
NyloFine 1000
Ultrafine aromatic polyamide for maximum temperature and chemical resistance with superior abrasion and
scratch resistance. Excellent matting agent for thin film
high temperature baking systems.
Synfluo 172VF / Synfluo 178VF
Cost-effective modified PTFE for improved surface
lubricity and abrasion resistance.
MicroKlear 116 / MicroKlear 295 /
MicroKlear 709
Provides slip and anti-blocking properties with excellent
gloss retention and clarity in waterborne and solventborne finishes. Excellent for can coatings.
Polyfluo® 190
Superior scratch resistance and abrasion resistance in
metal and plastic coatings. Used in interior/exterior
automotive coatings.
AquaPolyfluo 411
For improved slip, scratch and abrasion resistance in
high performance waterborne systems.
Polyfluo® 150 / Polyfluo® 523XF /
Polyfluo 535
High performance modified PTFE wax additives for
optimum lubricity with scratch and abrasion resistance
in metal and plastic coatings.
Fluo Grades
(FLUO 300 / FLUO 300XF / FLUO HT / FLUO HTI-2)
Provides heat resistance and lubricity in metal coatings.
Fluo X-1406
Aggregated submicron PTFE spheres that can be high
energy dispersed into discrete particles for maximum
lubricity and abrasion, especially in thin film applications.
*SEE RECOMMENDED ADDITION LEVELS ON BACK COVER
Matting & Gloss Control
MPI offers a full line of unique waxes designed to provide consistent matting
and gloss control properties. They exhibit excellent anti-blocking properties while
improving metal marking resistance. These additives will not settle or affect the
rheological properties of the coating. They are also used as a silica replacement with
minimal viscosity increase at higher loadings.
Micropro 400 / Micropro 600
Consistant gloss control with surface slip and abrasion resistance in metal and plastic coatings.
PropylMatte 31/ PropylMatte 31HD
Optimum gloss reduction without burnishing. Ideal for a wide variety of solventborne or waterborne coatings.
AquaMatte 31/AquaMatte 26HD
Provides effective gloss control and a smooth surface finish with superior in-can stability.
MicroMatte® 1011 UVW / MicroMatte® 1213 UVW
Efficient gloss control plus abrasion resistance for metal and plastic coatings, while still maintaining clarity.
Also used as a silica replacement with minimal viscosity increase at higher loadings.
Propylfluo 824 / Micropro 700
Polypropylene/PTFE combination wax provides superior gloss control, along with surface slip (lower COF)
and abrasion resistance.
Texture
The MPI products listed below represent a broad selection of polymer types. A full range of
particle sizes are available to help achieve the desired texture effect.
PropylTex Series
The PropylTex Series is a full range of unique polypropylene
texture additives. The low density and high solvent resistance
of PropylTex products will reduce or eliminate settling and
provide optimum performance in aromatic systems. Particle
size is carefully controlled to ensure batch-to-batch uniformity
with special narrow cuts of select PropylTex grades available
for the most demanding texture applications. PropylTex
waxes are particularly effective in texture coatings for
general industrial, automotive and plastic applications.
AquaTex Series
The AquaTex waxes are micronized high density polyolefins
that provide a unique texture effect. AquaTex waxes are
designed to reduce or eliminate floating to provide optimum performance in waterborne systems. Available in sizes
ranging from 100 - 325 mesh.
NyloTex Series
The NyloTex products are micronized polyamides that
are excellent for wear and abrasion resistance. NyloTex
grades exhibit a higher melt point than standard polyolefins
making them suitable for higher temperature applications.
NyloTex powders will ensure a consistent texture even at
high baking temperatures.
Soft Touch
MPI offers several product lines optimized for various Soft Touch applications. These products
provide top of the line results in high end applications where superior feel is critical. Various soft
touch effects can be achieved based on product selection in combination with different resin
systems.
MicroTouch Series
Based on polyurethane technology, MicroTouch particles provide soft touch surface effects that range from satiny smooth
to leathery to rubbery. MicroTouch products give a matte
appearance and provide superior scratch, burnish, and mar
resistance to your coating.
Polysilk 14
Formulated with softer wax polymers to provide a smooth
feel and optimum lubricity. Also imparts surface slip and
release properties.
SuperGlide 904
Modified amide wax for scratch and mar resistance along
with a silky surface feel. Can be combined 1:1 with AquaTex
325 or PropylTex 325S for a unique soft touch effect.
*SEE RECOMMENDED ADDITION LEVELS ON BACK COVER
About Micro Powders
Micro Powders, Inc. has been developing and manufacturing innovative specialty
micronized waxes, wax dispersions and emulsions since 1971 and now proudly offers
more than 150 unique and state-of-the-art products. Specifically created for the paint,
printing ink and coatings markets, these wax additives help formulators develop
improved and advanced surface coatings.
Product Highlights
Product
Wax Type(s)
AquaMatte 26HD
AquaMatte 31
AquaPoly 250
Modified Polyethylene
AquaPolyfluo 411
Modified Polyethylene/PTFE
AquaTex Series
Fluo 300
PTFE
Fluo 300XF
PTFE
Fluo HT
PTFE
Fluo HTI-2
PTFE
Fluo X-1406
PTFE
MicroKlear 116
Polyethylene/Carnauba
MicroKlear 295
Polyethylene/Carnauba
MicroKlear 709
Polyethylene/PTFE/Carnauba
MicroMatte 1011 UVW
Modified Polypropylene
MicroMatte 1213 UVW
Micropro 400
Micropro 600
Micropro 700
Modified Polypropylene/PTFE
MicroTouch Series
Polyurethane
MPP-615VF
Polyethylene
MPP-620VF
Polyethylene
MPP-645VF
Polyethylene
MPP-1241
Polyethylene
NyloFine 1000
Aromatic Polyamide
NyloTex Series
Polyamide
Polyfluo 150
Polyethylene/PTFE
Polyfluo 190
Polyethylene/PTFE
Polyfluo 523XF
Polyethylene/PTFE
Polyfluo 535
Polyethylene/PTFE
Polysilk 14
Polyethylene/PTFE
Propylfluo 824
Polypropylene/PTFE
PropylMatte 31
Polypropylene
PropylMatte 31HD
Polypropylene
PropylTex Series
Polypropylene
SuperGlide 904
Amide
Synfluo 172VF
Synthetic/PTFE
Synfluo 178VF
Synthetic/PTFE
Melt Point (°C)
105-111
135-140
114-123
117-123
135-140
>316
>316
>316
>316
>328
120-125
119-124
119-124
146-149
146-149
140-143
146-149
149-154
N/A
114-116
114-116
123-125
123-125
>279
218-224
113-116
121-132
113-117
108-115
96-118
150-160
160-170
160-170
160-170
138-145
104-110
104-110
Density
*Mean Particle
(g/cc@25°C) Size (microns)
1.07
0.99
0.98
1.10
0.99
2.20
2.20
2.20
2.20
2.20
0.97
0.97
1.10
0.94
0.94
0.93
0.93
1.04
1.05
0.95
0.95
0.96
0.96
1.19
1.14
1.15
0.99
1.26
1.02
1.04
1.04
0.86
1.11
0.86-0.90
0.97
1.01
1.03
*Maximum Particle
Size (microns)
6.0-8.5
26.00
8.0-12.0
31.00
8.0-10.0
31.00
7.0-9.0
22.00
5.5-6.5
22.00
2.0-4.0
15.56
2.0-4.0
12.00
3.0-5.0
15.56
4.0-6.0
22.00
4.5-5.5
15.56
4.0-6.0
22.00
4.0-6.0
22.00
6.0-9.0
22.00
6.0-9.0
22.00
5.0-7.0
22.00
7.0-9.0
22.00
5.0-7.0
22.00
6.0-8.0
22.00
5.0-7.0
22.00
7.0-9.0
22.00
20.0-25.0
110.00
6.0-10.0
31.00
4.0-6.0
15.56
10.0-12.0
31.00
3.5-5.5
15.56
5.0-6.0
22.00
8.0-10.0
31.00
5.0-7.0
22.00
8.0-12.0
31.00
8.0-12.0
31.00
4.0-6.0
22.00
4.0-7.0
22.00
5.0-7.0
22.00
**Recommended
Addition Levels
2.0-5.0%
2.0-5.0%
0.5-2.0%
0.5-1.5%
5.0-10.0%
0.5-2.0%
0.5-2.0%
0.5-1.0%
0.5-1.0%
0.5-2.0%
1.0-3.0%
1.0-3.0%
0.5-2.5%
1.0-5.0%
1.0-5.0%
0.5-5.0%
1.0-5.0%
0.5-4.0%
4.0-8.0%
1.0-3.0%
1.0-3.0%
1.0-3.0%
1.0-3.0%
1-0-2.0%
4.0-6.0%
1.0-3.0%
1.0-3.0%
0.5-3.0%
1.0-3.0%
1.0-3.0%
0.5-4.0%
2.0-5.0%
1.0-5.0%
3.0-10.0%
4.0-7.0%
0.2-2.0%
0.2-2.0%
The information contained herein is to the best of our knowledge true and correct and any suggestions are made without guarantee, express or implied, since conditions of use
are beyond our control. Micro Powders, Inc. disclaims any liability incurred in connection with the use of any data or suggestions. Nothing contained herein shall be construed as
a recommendation to infringe on any existing patents covering any material or its use.
580 White Plains Road • Tarrytown • New York 10591
TEL 914-793-4058 • FAX 914-472-7098 • EMAIL [email protected]
2-IC0414
Powder Coatings
MICRO POWDERS, INC.
Powder Coatings
At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the formulator produce superior
technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive that will
provide a variety of enhancements to powder coatings. The recommended addition levels* and some of the key performance
benefits of selected products are included in this brochure. The usual method of incorporation is to add the micronized waxes to
the pre-mix before melt extrusion. However, the micronized waxes may also be dry blended with the finished powder.
Anti-Gassing
The properties of anti-gassing in a powder coating can be achieved with controlled
molecular weight micronized waxes from MPI. The products listed below provide
anti-gassing as well as abrasion resistance properties.
MP-26VF
Cost-effective synthetic wax for excellent anti-gassing
properties.
MPP-230F
Economical and effective low molecular weight PE wax
for general anti-gassing of powder coatings.
MPP-620VF
A unique, finely
micronized
polyethylene wax
that is widely used for
anti-gassing. It can be incorporated in most resin systems for
optimum properties. It offers the added benefit of improved
extrusion flow characteristics.
MICROMIDE 520 & SYNSLIP 3750
Amide based waxes for use in coatings applied to difficult substrates where more aggressive anti-gassing or degassing is needed. Galvanized metal, cast aluminum
and MDF wood substrates are typical examples. Synslip
3750 will generally provide more surface lubricity and
mar resistance.
Abrasion Resistance With Lubricity
MPI offers a wide range of polymeric waxes that are combined with PTFE to give optimum levels of
performance and efficiency.
Synfluo 168VF
Cost-effective, good slip and
scratch resistance.
Synfluo 178VF
Optimum scratch and slip properties. Excellent for gloss retention.
Synfluo 172VF
Provides excellent lubricity and
scratch resistance properties.
Polyfluo® 523XF
Optimum scratch and abrasion
resistance with surface lubricity for
pigmented and clear powder
coatings. Excellent gloss retention.
The unique waxes listed below have proven to be very
effective for formulators trying to achieve matting and
gloss control properties in powder coatings.
Micropro 400
A high melt point modified polypropylene product which
can be used to control gloss and improve the hardness of
powder coatings.
MicroMatte® 2000
A finely micronized modified polypropylene, excellent
for polyester powder coatings as well as UV cured systems.
PropylMatte 31
A micronized polypropylene that is manufactured
using specialized equipment
to give a closely controlled
particle size distribution.
PropylMatte 31 is ideal
for most powder systems,
including TGIC-free, where a gloss level of 25 @ 60° can be
reached at 5% addition levels. Because of its non-porous
nature, PropylMatte 31 is ideal for exterior applications.
Hardness & Block Resistance
The use of micronized waxes from MPI listed below, uniformly dispersed in a powder coating,
can provide optimum hardness and anti-blocking properties while maintaining gloss levels.
MPP-611
Narrow melt point range
polyethylene wax for consistent performance.
MPP-620VF
Produced from a unique polyethylene polymer designed
to give optimum hardness and block resistance properties at
low addition levels.
MPP-615VF
Economical and cost-effective polyethylene wax for excellent hardness and block resistance.
Texture & Structure
Micro Powders offers a wide range of texturing waxes of various types to meet your technical
requirements. These products are produced using advanced micronizing techniques that produce
highly controlled particle size distributions. They are blended to ensure batch uniformity.
Synfluo 283TX
A combination of synthetic and
PTFE waxes which will give a
uniform, low profile texture with
good abrasion and lubricity.
Fluo 625F-H
This highly controlled PTFE is
designed to give a uniform high degree of texture with gloss
control while imparting excellent heat resistance and lubricity.
Coatings produced using this product are often overprinted.
Fluo 750TX
Unique, ultra high molecular weight PTFE grade for extra
structure and matting at low addition levels.
Fluo HT
Specially refined PTFE grade for texture and gloss control
in UV systems.
MicroTex 511
Designed as an economical and efficient alternative to
the more expensive PTFE texturing products being used in
powder coatings. Offers the most cost-effective combination
of texture and gloss control with recoatability.
NyloTex 140 & 200
For structure and micro texture in low-temperature
powders. Often used as a post-additive to finished powder.
About Micro Powders
micronized waxes, wax dispersions and emulsions since 1971. Today we offer
more than 150 state-of-the-art products specifically created for the paint, printing
ink and coatings markets. These sophisticated wax additives help formulators
develop enhanced surface coatings.
Product Highlights
Product
Wax Type(s)
Melt Point (°C)
Density
(g/cc@25°C)
*Mean Particle
Size (microns)
*Maximum Particle
Size (microns)
**Recommended
Addition Levels
Fluo HT
PTFE
>316 (soft. pt.)
2.2
2.0-4.0
12.0
2.5-5.0%
Fluo 625F-H
PTFE
>316 (soft. pt.)
2.2
13.0-21.0
44.0
1.0-4.0%
Fluo 750TX
PTFE
325-350 (soft. pt.)
2.2
20.0-30.0
148.0
0.5-1.0%
Polyproplylene
146-149
0.94
5.0-7.0
22.0
2.0-5.0%
Micromide 520
Amide
141-145
0.97
5.0-7.0
22.0
0.5-3.0%
Micropro 400
Polyproplylene
140-143
0.93
5.0-7.0
22.0
2.0-5.0%
MicroTex 511
PTFE
>316 (soft. pt.)
2.2
20.0-25.0
124.0
2.0-5.0%
MP-26VF
Synthetic
102-106
0.95
5.0-7.0
22.0
1.0-2.0%
MPP-230F
Polyethylene
113-124
0.94
10.0-12.0
31.0
0.2-1.0%
MPP-611
Polyethylene
109-111
0.95
6.0-8.0
22.0
1.0-3.0%
MPP-615VF
Polyethylene
114-116
0.95
6.0-8.0
22.0
0.5-1.0%
MPP-620VF
Polyethylene
114-116
0.95
6.0-8.0
22.0
0.5-1.0%
NyloTex 140
Polyamide
218-224
1.14
45.0-65.0
104.0 (140 mesh)
5.0-10.0%
NyloTex 200
Polyamide
218-224
1.14
30.0-50.0
74.0 (200 mesh)
5.0-10.0%
Polyfluo® 523XF
Polyethylene/PTFE
113-117
1.26
2.5-5.5
15.56
0.5-1.0%
PropylMatte 31
Polyproplylene
160-170
0.86
8.0-12.0
31.0
2.0-5.0%
Synfluo 168VF
Synthetic/PTFE
104-110
0.99
8.0-10.0
31.0
0.2-2.0%
Synfluo 172VF
Synthetic/PTFE
104-110
1.01
4.0-7.0
22.0
0.2-2.0%
Synfluo 178VF
Synthetic/PTFE
104-110
1.03
5.0-7.0
22.0
0.2-2.0%
Synfluo 283TX
Synthetic/PTFE
104-110
1.05
8.0-10.0
31.0
1.0-2.0%
Synslip 3750
Synthetic/Amide
250-265
0.95
5.0-7.0
22.0
0.5-3.0%
MicroMatte® 2000
MICRO POWDERS, INC.
3PC0113
Printing Inks
MICRO POWDERS, INC.
Printing Ink Applications
At Micro Powders, Inc. we pride ourselves in developing unique micronized waxes to help the ink formulator produce superior
technical products. The grades listed below will assist in selecting the most appropriate Micro Powders’ wax additive that will provide a variety of enhancements to various types of printing ink applications. Recommended addition levels* and
some of the key performance benefits of selected products are included in this brochure. The typical method of incorporation is to
add the micronized wax to the formula in the mixing stage. Otherwise, a predispersion of wax may be produced
to allow for easy addition to any portion of the formula.
Offset Inks & Overprint Varnishes (OPV’s)
MP-22XF
An economical synthetic wax for improved slip
properties.
MPP-230VF/MPP-308VF
Cost-effective PE waxes for rub resistance.
MPP-615VF/MPP-620VF/MPP-620XF
High molecular weight PE waxes for optimum rub
and slip in sheet fed and low temperature heat set inks.
These waxes will not interfere with recoatability
when UV topcoated.
MPP-645VF/MPP-645XF
Ultra high molecular weight PE
waxes for good rub resistance,
gloss retention and excellent
recoatability with OPV’s.
®
MicroMatte 1011 UVW/1213 UVW
Finely micronized modified polypropylene waxes that
provides uniform matting and gloss control with
minimal effects on rheology.
Polyfluo® 150
Cost-effective PE/PTFE combinations
for maximum rub and slip properties.
Polyfluo® 200
PE/PTFE combination with good recoatability in
UV OPV’s. Ideal for IR inks.
Polyfluo® 535/Polyfluo® 540
Unique modified PTFE that imparts high slip properties
in topcoats and OPV’s.
Polyfluo® 400XF/Polyfluo® 540XF
Unique modified PTFE waxes that allow a formula to meet
high slip requirements. These waxes perform well at low
levels of addition and are easily dispersed for excellent
performance in UV OPV applications.
Fluo HT/Fluo HTI-2
PTFE waxes that provide optimum heat resistance. Often
used in combination with PE wax in heat set inks.
Fluo X-1406
Contains clusters of sub-micron particles which provide
maximum lubricity in inks and coatings.
Flexographic & Gravure Printing Inks
Waterborne Flexo &
Gravure Inks
AquaBead® 525E
Unique emulsion of carnauba and paraffin waxes for
improved MVTR.
Aquawax 214/Aquawax 214VF
Oxidized synthetic waxes for carton inks. Higher melt point
and improved rub resistance.
AquaPoly 215
Cost-effective oxidized PE wax with excellent rub resistance
in carton and paper inks.
AquaPoly 250
High performance PE wax for optimum rub resistance
with no foaming. Excellent suspension stability in flexo carton
and paper inks.
Polyfluo® 190
PE/PTFE combination wax provides excellent wet rub
resistance with gloss retention. Ideal for lacquers and milk
carton inks.
AquaPolyfluo 411
Modified PE/PTFE combination that
provides optimum slip, heat resistance
and rub resistance. Ideal for preprint,
EPIC and OPV gloss applications.
Provides excellent rub resistance to
flexo and gravure paper inks.
AquaPolysilk 19/
Polysilk 14
Unique combinations of PE/PTFE for optimum slip, rub
resistance and tape release on plastic film, aluminum foil
and OPV applications. Excellent heat seal resistance.
PropylMatte 31
Polypropylene wax for non-slip inks and OPV’s.
Ideal for gloss control in flexo inks on multiwall bags, paper
and plastic.
Microspersion® 504E
Large particle size PE emulsion for waterborne flexo
and OPV’s.
AquaMatte® 31/AquaMatte® 22
Finely micronized oxidized polyolefins that are especially
useful in water reducible energy curable systems where a
tough, clear, low gloss finish is desired.
Microspersion® 930
Combination PE emulsion and micronized wax dispersion
that provides COF reduction, rub resistance with gloss
retention and clarity in high gloss OPV’s.
Solventborne Flexo &
Gravure Inks
MP-22/MP-22XF
Low cost synthetic wax for slip and rub resistance.
MPP-230F/MPP-230VF
Economical PE waxes for gravure and flexo applications.
Polyfluo® 200
Solvent resistant PE/PTFE
wax for slip, scratch
and heat resistance in
packaging inks.
MPP-611
Tough, hard PE wax for rub and scratch resistance in
packaging inks.
Polyfluo® 523XF
High molecular weight PE/PTFE wax for superior rub and
scratch resistance in high gloss inks and lacquers.
MPP-620VF/MPP-645VF
High molecular weight PE waxes for optimum rub resistance
and increased slip in packaging inks.
Polysilk 14/Polysilk 600
Unique combinations of waxes that provide slip
and tape release in paper, film and foil inks and coatings.
Excellent blocking resistance in heat seal applications.
Polyfluo® 150
PE/PTFE combination ideal for good slip and abrasion
resistance in packaging gravure inks and topcoats.
Polyfluo® 190
Combination of PE/PTFE for excellent rub and slip
with good gloss retention at low levels of addition in film
packaging inks.
PropylMatte 31
Polypropylene wax for good anti-blocking and non-slip
properties. Effective matting agent.
MicroKlear 116/MicroKlear 295
PE/carnauba combinations for excellent lubricity, gloss and
film clarity. Especially suited for topcoats and OPV’s.
Product Highlights
Wax Type(s)
Melt Point (°C)
Density
(g/cc@25°C)
*Mean Particle
Size (microns)
*Maximum Particle
Size (microns)
**Recommended
Addition Levels
Carnauba/Paraffin
n/a
0.94
n/a
n/a
2.0-10.0%
AquaMatte 22
Oxidized PE
135-140
0.99
6.0-8.0
22.0
2.0-5.0%
AquaMatte® 31
Oxidized PE
135-140
0.99
8.0-12.0
31.0
2.0-5.0%
AquaPoly 215
Oxidized PE
105-111
0.95
9.0-11.0
31.0
1.0-2.0%
Modified PE
117-123
0.98
8.0-10.0
31.0
1.0-2.0%
Modified PE/PTFE
117-123
1.10
6.0-8.0
22.0
0.5-1.0%
Product
AquaBead® 525E
®
AquaPoly 250
AquaPolyfluo 411
AquaPolysilk 19
Modified PE/PTFE
102-118
1.06
9.0-11.0
31.0
0.5-1.0%
Aquawax 214
Oxidized Synthetic
104-107
0.96
9.0-11.0
31.0
1.0-2.0%
Aquawax 214VF
Oxidized Synthetic
104-107
0.96
5.0-7.5
22.0
1.0-2.0%
Fluo HT
PTFE
>316
2.20
2.0-4.0
12.0
0.5-1.0%
Fluo HTI-2
PTFE
>316
2.20
3.0-5.0
15.56
0.5-1.0%
0.5-1.0%
Fluo X-1406
PTFE
>316
2.20
4.0-6.0
22.0
MicroKlear 116
PE/Carnauba
107-113
0.97
4.0-5.0
15.56
0.5-2.0%
MicroKlear 295
PE/Carnauba
104-110
0.97
4.0-6.0
22.0
0.5-2.0%
150-156
1.07
5.0-7.5
22.0
1.0-5.0%
®
MicroMatte 1213 UVW
Polypropylene
150-156
1.11
5.0-7.5
22.0
2.0-5.0%
Microspersion® 504E
PE Emulsion
Liquid
1.00
n/a
n/a
2.0-5.0%
Microspersion® 930
PE Dispersion
Liquid
0.98
n/a
n/a
1.0-3.0%
Synthetic
102-106
0.94
7.0-10.0
22.0
0.8-3.0%
MP-22
MP-22XF
Synthetic
102-106
0.94
4.5-6.5
22.0
0.8-3.0%
MPP-230F
Polyethylene
113-124
0.94
10.0-12.0
31.0
1.0-2.5%
MPP-230VF
Polyethylene
113-124
0.94
8.0-10.0
26.0
1.0-2.5%
MPP-308VF
Polyethylene
114-118
0.94
8.0-10.0
26.0
1.0-2.5%
MPP-611
Polyethylene
109-111
0.95
5.0-8.0
22.0
1.0-2.0%
MPP-615VF
Polyethylene
114-116
0.95
5.0-7.0
22.0
1.0-2.0%
MPP-620VF
Polyethylene
114-116
0.95
5.0-7.0
22.0
1.0-2.0%
MPP-620XF
Polyethylene
114-116
0.95
4.5-5.5
22.0
1.0-2.0%
MPP-645VF
Polyethylene
123-125
0.96
6.0-8.0
22.0
0.5-2.0%
MPP-645XF
Polyethylene
123-125
0.96
4.0-6.0
22.0
1.0-2.0%
Polyfluo® 150
PE/PTFE
113-116
1.15
3.5-5.5
15.56
0.4-1.0%
Polyfluo® 190
PE/PTFE
121-132
0.99
9.0-12.0
31.0
0.4-0.8%
0.2-0.8%
®
Polyfluo 200
PE/PTFE
124-126
1.10
9.0-11.0
31.0
Polyfluo® 400XF
Modified PTFE
108-115
1.35
3.0-5.0
11.0
0.5-1.0%
Polyfluo® 523XF
PE/PTFE
113-117
1.26
3.5-5.5
15.56
0.3-0.8%
Modified PTFE
108-115
1.02
5.0-6.0
22.0
0.2-0.5%
Polyfluo® 535
®
Polyfluo 540
Modified PTFE
108-115
1.02
5.0-6.0
22.0
0.2-0.5%
Polyfluo® 540XF
Modified PTFE
108-115
1.02
3.0-5.5
11.0
0.5-1.0%
Polysilk 14
PE/PTFE
96-118
1.04
7.5-9.5
31.0
0.5-1.0%
Polysilk 600
PE/PTFE/Amide
96-109
1.08
5.0-7.0
22.0
0.5-1.5%
PropylMatte 31
Polypropylene
160-170
0.89
8.0-12.0
31.0
1.0-2.0%
MICRO POWDERS, INC.
3INK0313
UV/EB INKS & Coatings
MICRO POWDERS, INC.
UV/EB INKS & Coatings
technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive which will
provide a variety of enhancements to various types of UV coatings and inks. The recommended addition levels* and
some of the key performance benefits of selected products are included in this brochure. The typical method of incorporation is to
add the micronized wax to the formula in the let-down stage. Otherwise a predispersion of wax may also be produced
to allow easy addition to any portion of the formula. To obtain optimum results when formulating matte and textured UV
coatings, it is advisable to choose a photoinitiator combination that cures from the bottom up.
Slip, Rub Resistance & Anti-Blocking
The following products provide optimum slip, rub resistance and anti-blocking properties to
UV coatings and inks.
MPP-615XF / MPP-620XF / MPP-620XXF
Micronized polyethylene waxes for optimum rub resistance
and slip properties for UV printing inks and coatings.
Polyfluo 150 / Polyfluo 190 /
Polyfluo 523XF/ olyfluo 540
PE/PTFE combination waxes which provide excellent slip and
film toughness in inks, coatings and OPV’s.
MicroKlear
116 / 295
Combinations of
polyethylene and carnauba
wax which impart slip while
maintaining clarity in
UV cationic can-end and
container coatings.
Texture
In today’s marketplace, many different surface appearances are required of finishes applied
to wood and composite substrates. The MPI products listed below represent a broad selection of
polymers and particle sizes to achieve texture. Specialty effects are also possible with
pigmented products.
Propyltex Series
The PropylTex series is a full
range of unique polypropylene texture additives. They are
ideal for furniture or cabinet coatings. Particle size is carefully
controlled to ensure batch-to-batch uniformity. Special narrow
cuts of select PropylTex grades are available for the most
demanding texture applications.
Aquatex Series
The AquaTex series is a complete range of micronized
oxidized polyolefin additives. A wide variety of particle sizes
are available to achieve a multitude of texturing effects in
specialty coatings.
Mar Resistance & Hardness
The products listed below are characterized by their high degree of hardness and
mar resistance properties.
MPP-123
High molecular weight, low density PE wax with a high
degree of hardness and minimal slip.
Polyfluo 190
Unique combination of high molecular weight polyethylene
and PTFE that provides abrasion and heel-mark resistance to
UV floor coatings.
Micropro 400 / Micropro 600
Modified polypropylene waxes that are extremely hard and
provide excellent mar resistance properties.
Micromatte® 2000
Improved mar and scuff resistance with clarity in UV
varnishes.
Gloss Control & Matting
Low gloss and satin finishes often reflect high quality in a wood coating. MPI offers a
full line of unique waxes designed to be used as gloss control agents with minimal
effects on rheology. They can be used with or without silica. When used in conjunction
with silicas, the waxes will help to keep silicas suspended in coatings.
MicroMatte® 2000
PropylMatte 31
MicroMatte®1213UVW / MicroMatte®1011UVW
Finely micronized modified polypropylene waxes that
provide uniform matting and gloss control. These products
have minimal effects on rheology of UV coatings while
maintaining excellent clarity and haze reduction.
Micropro 440W
Modified polypropylene wax. Provides smooth surface and
gloss control in water based UV coatings.
Propylfluo 824
Unique PP/PTFE combination wax for matting and gloss control, surface lubricity and abrasion resistance. This product will
have minimal effect on UV systems rheology.
AquaMatte® 31/ AquaMatte® 22
Finely micronized oxidized polyolefins that are especially
useful in water reducible energy curable systems where a
tough, clear, low gloss finish is desired.
Soft Feel & Tape Release
The products listed below will impart an excellent “feel” or smoothness and tape release
to UV coatings.
Polysilk 14
Formulated with softer wax
polymers to provide
a smooth feel and
optimum lubricity. This product will also provide optimum
tape release properties while reducing or eliminating the
need for silicones.
Superglide 904
Amide waxes combined with polyolefins providing excellent
clarity and gloss retention in energy cured systems. Very
smooth and scratch resistant surfaces can be achieved.
Superslip 6515XF / Superslip 6530
Combination of PE and amide wax that provides
excellent “hand feel” and lubricity as well as slip and scratch
resistance properties.
Scratch Resistance & Lubricity
The following products are effective additives for providing scratch resistance and lubricity.
Polyfluo 540XF / Polyfluo 400XF
Unique mixture of polyethylene and PTFE. Provides highest
degree of lubricity and scratch resistance while maintaining
gloss levels and clarity.
MP-22XF
Economical synthetic wax
which improves slip and
surface “feel.”
Synfluo 172XF / Synfluo 178XF
Synfluo 180XF
Combinations of high molecular weight synthetic waxes and
PTFE. Imparts excellent surface lubricity and scratch resistance.
The extra-fine particle size of these products allows them to
maintain the gloss in high-gloss systems.
Superslip 6515XF
Combination of polyethylene and amide wax. Excellent
“hand feel” and lubricity in UV wood finishes.
Fluo HT / Fluo HTI-2
PTFE for UV can coatings and UV powder coatings. Very
good mobility and heat resistance.
Polyfluo 523XF
Combination of high melt point polyethylene and PTFE
uniquely suited for metal substrates. Excellent mobility and
scratch resistance in high gloss, clear, can coating systems.
About Micro Powders
Micro Powders, Inc. has been developing and manufacturing innovative
speciality micronized waxes, wax dispersions and emulsions since 1971. Today
we offer more than 150 state-of-the-art products specifically created for the
paint, printing ink and coatings markets. These sophisticated wax additives help
formulators develop enhanced surface coatings.
Product Highlights
Product
Wax Type(s)
AquaMatte® 22
Oxidized PE
®
AquaMatte 31
Polyolefin
AquaTex Series
Fluo HT
PTFE
Fluo HTI-2
PTFE
MicroKlear 116
PE/Carnauba
MicroKlear 295
PE/Carnauba
Polypropylene
MicroMatte® 1213UVW Modified Polypropylene
MicroMatte® 2000
Micropro 400
Micropro 440W
Micropro 600
MP-22XF
Synthetic
MPP-123
Polyethylene
MPP-615XF
Polyethylene
MPP-620XF
Polyethylene
MPP-620XXF
Polyethylene
Polyfluo® 150
PE/PTFE
Polyfluo® 190
PE/PTFE
Polyfluo® 400XF
PE/PTFE
®
Polyfluo 523XF
PE/PTFE
Polyfluo® 540
PE/PTFE
Polyfluo® 540XF
PE/PTFE
Polysilk 14
PE/PTFE
Propyfluo 824
PP/PTFE
PropylMatte 31
Polypropylene
PropylTex Series
Polypropylene
SuperGlide 904
PE/Amide
Superslip 6515XF
PE/Amide
Superslip 6530
PE/Amide
Synfluo 172XF
Synthetic/PTFE
Synfluo 178XF
Synthetic/PTFE
Synfluo 180XF
Synthetic/PTFE
Melt Point (°C)
Density
(g/cc@25°C)
135-140
135-140
135-140
>316
>316
107-113
104-110
150-156
150-156
146-149
140-143
150-156
146-149
102-106
110-113
114-116
114-116
114-116
113-116
121-132
108-115
113-117
108-115
108-115
96-118
150-160
160-170
160-170
138-145
124-137
124-135
104-110
104-110
104-110
0.99
0.99
0.99
2.20
2.20
0.97
0.97
1.07
1.11
0.94
0.93
0.94
0.93
0.94
0.92
0.95
0.95
0.95
1.15
0.99
1.35
1.26
1.02
1.02
1.04
1.04
0.89
0.86
0.97
0.95
0.95
1.01
1.03
1.10
*Mean Particle
Size (microns)
*Maximum Particle
Size (microns)
6.0-8.0
22.0
8.0-12.0
31.0
Wide range available
2.4-4.0
12.0
3.0-5.0
15.56
4.0-5.0
15.56
4.0-6.0
22.0
5.0-7.5
22.0
5.0-7.5
22.0
6.0-9.0
22.0
4.5-7.5
22.0
5.0-7.5
22.0
6.0-9.0
22.0
4.5-6.5
22.0
10.0-12.0
31.0
4.5-5.5
31.0
4.5-5.5
22.0
4.25-4.75
15.56
3.5-5.5
15.56
9.0-12.0
31.0
3.0-5.0
11.0
3.5-5.5
15.56
5.0-6.0
22.0
3.0-5.5
11.0
7.5-9.5
31.0
5.0-7.0
22.0
8.0-12.0
31.0
Wide range available
4.0-7.0
22.0
4.0-6.0
15.56
6.0-7.5
22.0
3.5-6.0
18.50
3.0-5.0
11.0
3.0-5.0
11.0
**Recommended
Addition Levels
2.0-5.0%
2.0-5.0%
5.0-10.0%
0.3-1.0%
0.3-1.0%
0.2-0.5%
0.2-0.5%
2.0-4.0%
2.5-5.0%
2.5-5.0%
3.0-6.0%
2.0-6.0%
3.0-6.0%
1.0-2.0%
0.5-1.5%
0.2-0.5%
0.2-0.5%
0.2-0.5%
0.5-1.0%
0.5-1.0%
0.2-0.5%
0.5-3.0%
0.5-1.0%
0.5-1.0%
0.5-1.0%
0.5-4.0%
2.5-5.0%
5.0-10.0%
0.5-3.0%
1.0-2.0%
1.0-2.0%
0.1-0.3%
0.1-0.3%
0.1-0.3%
MICRO POWDERS, INC.
3UVEB0313
Wood Coatings
MICRO POWDERS, INC.
Wood Coatings
technical products. The grades listed below will assist you in selecting the most appropriate Micro Powders’ wax additive that will
provide a variety of enhancements to wood finishes, topcoats and stains. The recommended addition levels* and some of the
key performance benefits of selected products are included in this brochure. The typical method of incorporation is to add the
micronized wax to the formula in the let-down stage. Otherwise, a pre-dispersion of wax may also be produced.
Scratch &
Mar Resistance
Wax additives are often the first line of defense against scratch and mar on the surface of wood
coatings. These micronized waxes from MPI offer the best combinations of tough, high molecular
weight waxes as well as PTFE modified waxes for optimum scratch and abrasion resistance.
MPP-615VF / MPP-620VF
Micronized polyethylene waxes for optimum mar resistance.
Superslip 6515
For scratch resistance in matte and satin UV coatings
for furniture.
MP-22VF
Economical synthetic wax for general surface slip and scratch
protection in wood varnishes.
AquaPoly 215 & Aquawax 214
For scratch and mar resistance as well as anti-block in
waterborne wood coatings.
Synfluo
172VF / 178VF
For slip, scratch and mar resistance
with excellent gloss retention in
furniture coatings.
AquaPolyfluo 411
For use in water based door and window frame coatings.
Micropro 400 / 500
For scratch and mar resistance in satin and matte finishes.
Can replace or reduce sedimentation of silica additives.
NyloFine 1000
Unique ultrafine aromatic polyamide for superior
abrasion, scratch, and chemical resistance with a soft
surface feel.
Lubricity & Smooth Feel
The MPI waxes listed below have proven to be extremely effective when seeking hardness,
smooth feel and lubricity in waterborne, solvent or high solids wood coatings as well as clear
lacquers for wood substrates.
AquaSuperslip 6550
For smooth feel and gloss control with slip in waterborne
polyurethane and acrylic systems.
MP-22VF / MP-22XF
Economical synthetic waxes which improve slip and surface
“feel” in wood finish applications.
Aquawax 214VF & AquaPoly 215VF
For scratch resistance and smooth surface feel in
waterborne clear varnishes.
Polyfluo® 535 / 540
Excellent for use in high gloss clear lacquers. Will also
provide heat resistance.
Micropro 440W
Gloss control and lubricity for low gloss waterborne varnishes
and topcoats.
SuperGlide 904
Excellent lubricity, surface smoothness and blocking resistance without PTFE.
Micropro 700
PTFE modified polypropylene for smooth feel and slip in satin
acrylic and polyurethane finishes.
Superslip 6515 / 6525 / 6530
Provides a smooth surface with good “hand” in satin wood
and furniture coatings.
Synfluo 172XF / 178XF / 180XF
Excellent slip and gloss retention in furniture lacquers.
Texture
In today’s marketplace, many different surface appearances are required of finishes applied
to wood and composite substrates. The MPI products listed below represent a broad
selection of polymers and particle sizes to achieve texture.
PropylTex Series
The PropylTex series is a full range of
unique polypropylene texture additives.
They are ideal for furniture or cabinet
coatings. Particle size is carefully controlled
to ensure batch-to-batch uniformity with
special narrow cuts of select PropylTex
grades available for the most
demanding texture applications.
NyloTex Series
The NyloTex Series is a range of
micronized polyamide texture
additives that impart maximum
wear and abrasion resistance
along with gloss reduction.
AquaTex Series
The AquaTex waxes are micronized high-density
polyolefins that provide a unique texture effect.
AquaTex waxes are designed to reduce or eliminate floating to provide optimum performance in
waterborne systems. AquaTex will also impart a
smoother “feel” than other types of texturizing
agents due to its rounded, almost spherical shape.
A full series of particle size ranges are available.
Low gloss and satin finishes often convey high quality in a wood coating. MPI offers a full
line of unique waxes designed to achieve high performance in demanding formulations while
maintaining recoatability.
Micropro 200
Micropro 400
Micropro 500
For use in acrylic and
polyurethane matte and satin systems. The Micropro
waxes will provide burnish resistance, will not settle or affect
rheology. They can be used with or without silica. When
used in conjunction with silica the Micropro waxes will keep
silicas suspended.
MicroMatte® 2000
MicroMatte® 1011 UVW / 1213 UVW
Efficient gloss control for UV and waterborne satin finishes
with excellent clarity. Formulated to provide optimum
application viscosity and scratch resistance.
Micropro 440W
Formulated to provide excellent gloss control and lubricity
in waterborne polyurethane systems. Also works well in
UV systems.
AquaMatte 31/ 22 / 26HD
Recommended for superior in-can stability and ease of
incorporation in waterborne systems. Efficient gloss reduction
with a smooth surface feel.
PropylMatte 31/ PropylMatte 31HD
Optimum gloss control and abrasion resistance in UV and
conventional topcoats where silicas cannot be used.
Water Repellency & Beading
Exterior coatings are often required to provide water beading for both protective and aesthetic
reasons. MPI micronized waxes can provide these properties while increasing weather resistance
and durability of the coatings or stains.
AquaBead® 519 / 916
Unique additives to impart
water repellency to all types of
wood finishes and stains.
AquaBead® 270E / 525E
For water repellency in waterborne paints and coatings.
MP-22XF
For exterior wood stains to increase the longevity of
water “beading.”
Micropro 400
For excellent long lasting weather resistance that will also
reduce chalking.
About Micro Powders
micronized waxes, wax dispersions and emulsions since 1971. Today we offer more than 150
state-of-the-art products specifically created for the paint, printing ink and coatings markets.
These sophisticated wax additives help formulators develop enhanced surface coatings.
Product Highlights
Product
AquaBead 270E
AquaBead 519
AquaBead 525E
AquaBead 916
AquaMatte 22
AquaMatte 26HD
AquaMatte 31
AquaPoly 215
AquaPoly 215VF
AquaPolyfluo 411
AquaSuperslip 6550
AquaTex Series
Aquawax 214
Aquawax 214VF
MicroMatte® 2000
Micropro 200
Micropro 400
Micropro 440W
Micropro 500
Micropro 700
MP-22VF
MP-22XF
MPP-615VF
MPP-620VF
NyloFine 1000
NyloTex Series
Polyfluo® 535
Polyfluo® 540
PropylMatte 31
PropylMatte 31HD
PropylTex Series
SuperGlide 904
Superslip 6515
Superslip 6525
Superslip 6530
Synfluo 172VF
Synfluo 172XF
Synfluo 178VF
Synfluo 178XF
Synfluo 180XF
Wax Type(s)
Melt Point (°C)
Density
(g/cc@25°C)
PE Emulsion
Combination
Carnauba/Paraffin
Combination
Modified Polyolefin
N/A
140-145
N/A
128-134
135-140
105-111
135-140
105-111
105-111
117-123
126-130
125-158
104-107
104-107
150-156
150-156
146-149
140-143
140-143
150-156
141-143
149-154
102-106
102-106
114-116
114-116
>279
218-224
108-115
108-115
160-170
160-170
160-170
138-145
124-137
135-145
135-145
104-110
104-110
104-110
104-110
104-110
0.96
0.91
0.94
0.93
0.99
1.07
0.99
0.95
0.95
1.10
0.94
1.19
0.96
0.96
1.07
1.11
0.94
0.95
0.93
0.94
0.94
1.04
0.94
0.94
0.95
0.95
1.19
1.14
1.02
1.02
0.86
1.07
0.86
0.97
0.95
0.95
0.95
1.01
1.01
1.03
1.03
1.10
Modified Polyethylene/PTFE
Modified Polyethylene/Amide
Oxidized Synthetic
Oxidized Synthetic
Modified Polypropylene/PTFE
Synthetic
Synthetic
Polyethylene
Polyethylene
PPA/Polyphthalamide
Polyamide
Polyethylene/PTFE
Polyethylene/PTFE
Polypropylene
Polypropylene
Polyethylene/Amide
Polyethylene/Amide
Polyethylene/Amide
Polyethylene/Amide
Synthetic/PTFE
Synthetic/PTFE
Synthetic/PTFE
Synthetic/PTFE
Synthetic/PTFE
*Mean Particle
Size (microns)
*Maximum Particle **Recommended
Size (microns)
Addition Levels
N/A
N/A
6.0-8.0
22.0
N/A
N/A
7.0-9.0
22.0
6.0-8.0
22.0
6.0-8.5
26.0
8.0-12.0
31.0
9.0-11.0
31.0
5.0-7.5
22.0
7.0-9.0
22.0
6.0-7.5
22.0
9.0-11.0
31.0
5.0-7.5
22.0
5.0-7.5
22.0
5.0-7.5
22.0
5.0-7.0
22.0
8.0-11.0
31.0
5.0-7.0
22.0
9.0-11.0
31.0
5.0-7.0
22.0
5.0-7.0
22.0
6.0-8.0
22.0
5.0-6.0
22.0
6.0-8.0
22.0
6.0-8.0
22.0
6.0-10.0
31.0
5.0-6.0
22.0
5.0-6.0
22.0
8.0-12.0
31.0
8.0-12.0
31.0
4.0-6.0
22.0
6.0-8.0
22.0
6.0-8.0
22.0
6.0-8.0
22.0
4.0-7.0
22.0
3.5-6.0
18.5
5.0-7.0
22.0
3.0-5.0
11.0
3.0-5.0
11.0
3.0-10.0%
1.0-4.0%
2.0-10.0%
1.0-3.0%
2.0-5.0%
2.0-5.0%
2.0-5.0%
0.5-2.0%
0.5-2.0%
0.5-2.0%
0.5-2.0%
3.0-10.0%
0.5-1.5%
0.5-2.0%
2.0-4.0%
2.0-4.0%
1.0-4.0%
2.0-4.0%
2.0-4.0%
2.0-5.0%
2.0-4.0%
0.5-4.0%
1.0-3.0%
1.0-3.0%
0.5-1.5%
0.5-1.5%
1.0-2.0%
4.0-6.0%
1.0-3.0%
0.5-1.0%
1.0-4.0%
1.0-5.0%
3.0-10.0%
0.5-3.0%
0.5-3.0%
0.5-3.0%
0.5-3.0%
0.5-2.0%
0.2-2.0%
0.5-2.0%
0.5-2.0%
0.1-0.3%
MICRO POWDERS, INC.
2-WC0414

Micro Powders, Inc.

Transcription

Similar documents

Characterization and analysis of waxes by differential thermal

Utrecht Art Supplies Studio Craft: Gloss Medium as a Varnish

nueva in nudes - Market America

PDF

Keystone Industries 52 W King St Myerstown, PA 17067 www

June 2012 - The Washington Bed and Breakfast Guild

Valve Guide

Market Focus - Auto Industry Raises the Ante

Bulgarian Accreditation Services CERTIFICATE OF ACCREDITATION

luxco candle waxes

wax • t`s • gear • videos