TACTICAL RINGS

54
TACTICAL RINGS
Millett® Tactical Rings are a lightweight, strong solution for the most
demanding uses. Six cap-clamping screws positively hold your scope,
no matter the level of recoil, and the base clamp holds the scope to
the base. Millett tactical rings are your answer to any mounting needs.
Item
dIameter
heIght
fInIsh
DT00713
DT00714
DT00715
30MM
30MM
30MM
LOW
HIGH
MED
MATTE
MATTE
MATTE
GRAbbeR™
The Grabber is the answer for quick, easy,
repeatable mounting of optics and tactical tools to Weaver,
Picatinny-type rails. Manufactured with heat-treated steel, the
Grabber holds tight with a 5-to-1 mechanical advantage and
returns to zero every time.
TACTICAL SCope RING
w/ACCeSSoRy RAIL
Millett’s new Tactical Accessory Mount Scope Ring lets you
mount accessories above the objective of 30mm scopes.
Simple Picatinny rail mount allows ease of mounting with
clamping-type Weaver rings. It’s positive, sure mounting for your
scope and easy-to-use accessory mounting all in one.
Item
dIameter
heIght
fInIsh
GB00002
GB30002
1"
30MM
MED
MED
MATTE
MATTE
.22 RISeR RAILS
Item
descrIptIon
dIameter
heIght
fInIsh
DT00716
DT00717
DT00718
W/RAIL
W/RAIL
W/RAIL
30MM
30MM
30MM
LOW
MED
HIGH
MATTE
MATTE
MATTE
Easily mount your large objective scope, or any other optical
device you like, to the top of your .22. Available in two
models: choose a cut out for easy bolt action loading or
rails for semi-automatics.
pICATINNy RAILS
Millett’s Picatinny Rails are offered for the
Remington 700 LA + SA right hand, Savage
AccuTrigger LA + SA right hand and blank tactical.
Mount a wide range of optics, from red dots to large target scopes.
The rails are heat-treated T6 aluminum, black anodized with all required
hardware for mounting.
Item
descrIptIon
tYpe
actIon
fInIsh
RI00001
RI00002
TIP OFF RISER
TIP OFF RISER
.22
.22
SEMI-AUTO
BOLT ACTION
MATTE
MATTE
M4 RISeR RAILS
Achieve a solid hold and proper cheek position and with
normal height scope rings on flattop AR, M4 and other rifle
models. Riser clamps onto any Picatinny/Weaver-type base.
Item
descrIptIon
receIVer
tYpe
fInIsh
PC00001
REMINGTON 700
SAVAGE
ACCU-TRIGGER
BLANK TACTICAL
REMINGTON 700
SAVAGE
ACCU-TRIGGER
SHORT ACTION
RIGHT HAND
MATTE
SHORT ACTION
RIGHT HAND
MATTE
Item
descrIptIon
heIght
fInIsh
RI00003
M4 RISER
.625 IN.
MATTE
LONG ACTION
RIGHT HAND
MATTE
MATTE
LONG ACTION
RIGHT HAND
MATTE
PC00002
PC00003
PC00004
PC00005
M1A – M14
MouNTING SySTeM
20 MoA RAILS
Align your scope and achieve greater elevation adjustment. This Picatinny
rail is configured higher in the rear than the front. Manufactured to the
highest standards using lightweight, yet extremely rugged T6 aluminum.
Item
descrIptIon
receIVer
tYpe
fInIsh
PC00009
PC00010
REMINGTON 700
REMINGTON
SAVAGE
ACCU-TRIGGER
SAVAGE
ACCU-TRIGGER
SHORT ACTION
LONG ACTION
RIGHT HAND
RIGHT HAND
MATTE
MATTE
SHORT ACTION
RIGHT HAND
MATTE
LONG ACTION
RIGHT HAND
MATTE
PC00011
PC00012
Featuring solid T6 aluminum, improved thumb screw for easy tightening,
clamping screw on the forward part of the rail to assure zero, and a
positive hold and easy removal and installation, the M1A mount is
strong enough for the largest scope and ready for any mission.
Item
descrIptIon
heIght
fInIsh
PC00014
M1a/M14 Scope Mount Picatinny Rail
.625 IN.
MATTE
M16 HANdLe MouNT
Item
descrIptIon
heIght
fInIsh
PC00016
M16/AR15 Handle Scope Mount Picatinny Rail
.625 IN.
MATTE
An easy-to-use, quick mount for scopes and sights, this Picatinny
rail’s extended length allows for a wide range of mounting options.
Made with strong T6 aluminum, this precision-machined
rail ensures only the best accuracy.
55
THE MOST RIGID RING-TO-BASE
CONNECTION AVAILABLE
TURN-IN STEEL RINGS
turn-In standard rings
Millett® scope mounts are the highest quality rings and bases available.
They’re custom crafted in heat-treated nickel-steel with all excess weight
removed. This performance also has style, featuring many of Millett’s
unique designs.
smooth
engraved
nIcKel
matte
ULTRa LIGhT
Two-PIEcE BaSES
descrIptIon
heIght
fInIsh
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
30MM
30MM
30MM
30MM
30MM
30MM
Low
Med
High
Extra High
Low
Med
High
Extra High
Low
Med
High
Extra High
Low
Med
High
Low
Med
High
Low
Med
High
Smooth
Smooth
Smooth
Smooth
Matte
Matte
Matte
Matte
Nickel
Nickel
Nickel
Nickel
Engraved
Engraved
Engraved
Smooth
Smooth
Smooth
Matte
Matte
Matte
turn-In two piece Bases
Item
Our Two-Piece bases are rock-solid, easy
to install, and the lightest you’ll find. These
precision-fit parts provide maximum ejection
port clearance and have 30-50% less weight.
Browning
BB00005
BB00705
BB00905
BB00004
fn mauser series, Interarms
FN00002
FN00003
Kimber of america
KM00001
Marlin
MB00007
remington, Weatherby
SB70001
SB70701
SB70901
RB00006
RB00906
RB00007
RB00907
savage
SB00009
SB00709
SB00909
Winchester & marlin mr-7
WB70003
WB70703
WB70903
WB00008
STaNdaRd
ExTENSIoN RINGS
This unique, solid one-piece ring
provides the most durable and
reliable hold available today –
proof that Millett makes the best
rings around.
standard extension rings
56
Item
SR00001
SR00002
SR00003
SR00008
SR00701
SR00702
SR00703
SR00708
SR00901
SR00902
SR00903
SR00908
ER00001
ER00002
ER00003
SR00004
SR00005
SR00006
SR00704
SR00705
SR00706
descrIptIon
fInIsh
A-Bolt
A-Bolt
A-Bolt
BLR, BAR
FN Series, Interarms Mark X
Mauser 96
Smooth
Matte
Nickel
Smooth
Matte
Smooth
Smooth
Kimber Model 82C & 84C
Smooth
336
Smooth
REM 700 Series, Weatherby
REM 700 Series, Weatherby
REM 700 Series, Weatherby
REM 7400, 7600, 4, 6, AMT
REM 7400, 7600, 4, 6, AMT
REM 740, 742, 760
REM 740, 742, 760
Smooth
Matte
Nickel
Smooth
Nickel
Smooth
Nickel
110, 111, 112, 114, 116
110, 111, 112, 114, 116
110, 111, 112, 114, 116
Smooth
Matte
Nickel
70 Series
70 Series
70 Series
94, Angle-Eject
Smooth
Matte
Nickel
Smooth
turn-In standard rings
Item
dIameter
descrIptIon
fInIsh
rIng
a-heIght
B-heIght
c-heIght
d-heIght
e-heIght
f-heIght
EX00001
EX00002
EX00003
EX00004
EX00005
EX00006
EX00008
1"
1"
1"
1"
1"
1"
30MM
STD R EXT F
EXT R EXT F
EXT R EXT F
STD R EXT F
EXT R EXT F
EXT R EXT F
EXT R EXT F
Smooth
Smooth
Smooth
Smooth
Smooth
Smooth
Smooth
1"
30MM
.145
.206
.265
.350
.395
.495
.500
.265
.350
.395
.495
Angle-loc™ WindAge AdjustAble WeAver-style rings
The Angle-Loc windage-adjustable scope mount system is the most significant improvement to the traditional
Weaver-Style mount in many years. Adjust your scope side to side for precise alignment to your receiver. All
components are made of heat-treated nickel-steel for rock-solid durability.
smooth
engraved
nIckeL
matte
angle-Loc Windage adjustable ruger 10/22 scope rings
angle-Loc Windage adjustable rings
Item
dIameter
descrIptIon
fInIsh
Item
AL00010
AL00011
AL00012
AL00710
AL00711
AL00712
AL00722
AL00722
AL00910
AL00911
AL00912
AL00007
AL00008
AL00009
AL00016
AL00017
AL00018
AL00716
AL00717
AL00718
AL00917
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
30MM
30MM
30MM
30MM
30MM
30MM
30MM
Low
Medium
High
Low
Medium
High
Extra High AR-15 Flat Top
Extra High (1.025)
Low
Medium
High
Low
Medium
High
Low
Med
High
Low
Med
High
Med
Smooth
Smooth
Smooth
Matte
Matte
Matte
Matte
Matte
Nickel
Nickel
Nickel
Engraved
Engraved
Engraved
Smooth
Smooth
Smooth
Matte
Matte
Matte
Nickel
Rings Fit Factory Supplied Base For Ruger 10/22, 96/22
RM00026
Rings Fit Weaver To-9 Base For Ruger 10/22, 96/22
RM00021
RM00011
angle-Loc Windage adjustable .22 caliber scope rings
Item
dIameter
descrIptIon
fInIsh
TP00001
TP00002
TP00005
TP00701
TP00702
TP00705
TP00003
TP00006
TP00713
TP00714
TP00715
1"
1"
1"
1"
1"
1"
11MM
11MM
1"
1"
30MM
Low
Med
High
Low
Med
High
Med
High
Med
High
High
Smooth
Smooth
Smooth
Nickel
Nickel
Nickel
Matte
Matte
Matte
Matte
Matte
angle-Loc Windage adjustable ruger scope rings
Item
dIameter
descrIptIon
fInIsh
RR77004
RR77005
RR77006
RR77007
RM00011
1"
1"
30MM
30MM
1"
Med
High
Med
High
High
Smooth
Smooth
Smooth
Smooth
Smooth
dIameter
descrIptIon
1"
Med
1"
1"
Med
High
fInIsh
Smooth
Smooth
Smooth
Smooth
Smooth
angle-Loc Windage adjustable sako scope rings
Item
dIameter
descrIptIon
fInIsh
SA00010
SA00011
SA00012
SA00022
SA00023
1"
1"
1"
30MM
30MM
Low
Med
High
Med
High
Smooth
Smooth
Smooth
Smooth
Smooth
angle-Loc Windage adjustable tikka scope rings
Item
dIameter
descrIptIon
fInIsh
TK00001
TK00002
TK00003
TK00006
TK00007
TK00008
1"
1"
1"
30MM
30MM
30MM
Low
Med
High
Low
Med
High
Matte
Matte
Matte
Matte
Matte
Matte
angle-Loc Windage adjustable c2/Brnd scope rings
Item
CZ-527
BN00001
BN00002
BN00003
BN00006
BN00007
BN00008
ZKM-611, 452
BN00010
BN00011
ZKK-600, 601, 602, CZ-550
BN00016
BN00017
BN00019
BN00020
CZ-452 "European"
BN00022
BN00023
dIameter
descrIptIon
fInIsh
1"
1"
1"
30MM
30MM
30MM
Low
Med
High
Low
Med
High
Matte
Matte
Matte
Matte
Matte
Matte
1"
1"
Med
High
Matte
Matte
1"
1"
30MM
30MM
Med
High
Med
High
Matte
Matte
Matte
Matte
1"
1"
Med
High
Matte
Matte
57
The world's sTrongesT Two-piece base
Angle-loc™ Steel
two-Piece BASeS
All Millett ring tops are
interchangeable for
easy installation.
Exclusive
interlocking
alignment
guides.
These two-piece bases are the perfect match for our very
popular Angle-Loc rings. Millett two-piece steel bases are
30 to 50 percent lighter than other brands. We’ve removed
any excess weight without sacrificing strength.
Less ring gap for
cleaner lines and a
stronger mount.
Recoil-proof
magnum splines
prevent scope
slippage and
dampen
vibrations.
All excess
weight is
removed,
with no loss
in strength.
• Exclusive interlocking alignment guides.
• Less ring gap for cleaner lines and a stronger mount.
• Millett Angle-Loc clamping system is windage adjustable and rock-solid.
magnum splines prevent scope slippage and
• Recoil-proof
dampen vibrations.
Millett Angle-Loc™
clamping system is
windage adjustable
and rock-solid.
Windage
adjustable.
Bases are precision
fit and won’t move
under heavy recoil.
World’s strongest
lIght WeIght Bases.
all-steel angle-loc two-Piece Bases
Make/Model
IteM
FInIsh
Browning A-Bolt WSM
Browning A-Bolt WSM
Browning A-Bolt WSM
Browning A-Bolt WSSM
Interarms MK X, FN Mauser
98, Parker Hale
CVA Octagon
ST00002
ST00702
ST00902
ST00016
Smooth
Matte
Nickel
Smooth
ST00004
Smooth
ST00005
ST00905
ST00007
ST00907
ST00008
ST00908
Smooth
Nickel
Smooth
Nickel
Smooth
Nickel
ST00009
Smooth
ST00709
ST00909
ST00017
ST00010
ST00710
ST00910
ST00015
ST00715
ST00915
Matte
Nickel
Smooth
Smooth
Matte
Nickel
Smooth
Matte
Nickel
CP50703
Smooth
Matte
ST00011
ST00711
ST00911
ST00018
Smooth
Matte
Nickel
Smooth
Knight MK-85
Knight MK-86
Knight Wolverine
Remington 700, Weatherby
MK V, Vanguard
Remington 7400/7600
Savage 110
Savage 110 Accu-Trigger
Savage 110 Accu-Trigger
Combo Angle-Loc™ High
CP50703
Winchester 70, 70 WSM
Winchester 70 WSSM
angle-loc Windage adjustable extension rings
IteM
dIaMeter
desCrIPtIon
FInIsh
EX25001
EX25003
EX25004
EX25006
EX25007
EX25008
EX25009
EX25010
1"
1"
1"
1"
30MM
30MM
30MM
30MM
Med (1 Ext 1 Std)
Med (2 Ext)
High (1 Ext 1 Std)
High (2 Ext)
Med (1 Ext 1 Std)
Med (2 Ext)
High (1 Ext 1 Std)
High (2 Ext)
Smooth
Smooth
Smooth
Smooth
Smooth
Smooth
Smooth
Smooth
ar-15 Flat top
58
IteM
desCrIPtIon
WIdth
heIght
FInIsh
AL00722
AR-15 Flat Top Rings
1.025
High
Matte
angle-loC
WIndage adJUstaBle
sCoPe eXtensIons
Angle-loc windAge
AdjuStABle extenSion RingS
The easiest way to bring your scope to zero, Angle-Loc Windage Adjustable Extension Rings
are the most ruggedly durable way to precisely align your scope with your receiver. Made
of heat-treated nickel-steel, these rings can withstand anything you put them through.
Low
Medium
d
C
B
a
Extra
High
High
Medium
High .625
.625
F
e
aluminum detachable rings
rIng
a-heIght
B-heIght
C-heIght
d-heIght
e-heIght
F-heIght
Angle-Loc 1 IN.
Angle-LoC 30 MM
.22 CAL 1 IN.
.22 CAL 30 MM
RUGER M77 1 IN.
RUGER M77 30 MM
SAKO 1 IN.
SAKO 30 MM
TIKKA 1 IN.
TIKKA 30 MM
BRNO CZ, ZKM 1IN.
BRNO CZ,ZKM30MM
BRNO ZKK 1 IN.
BRNO ZKK 30 MM
.275
.319
.290
—
—
—
.412
.347
.473
.395
.473
.395
.345
.404
.395
.482
.420
.422
R-.586 F-.473
R-.510 F-.397
.532
.614
.586
.508
.586
.508
.460
.550
.525
.626
.594
—
R-.699 F-.586
R-.623 F-.510
.662
.759
.724
.621
.724
.621
.590
.698
1.017
—
—
—
—
—
—
—
—
—
—
—
—
—
.395
.477
—
—
—
—
.532
—
—
—
—
—
—
—
.525
.622
—
—
—
—
—
—
—
—
—
—
—
—
ar-15 Flat top
Aluminum DetAchAble Rings
The new Angle-Loc Detachable scope mount system provides the same removable feature as
the traditional Weaver-style mount. These rings have all excess weight removed to provide a
slim new look, but are performance guaranteed to withstand the toughest field conditions.
• Lightweight 100% aircraft quality aluminum
• Coin slots for easy removal and installation
Angle-Loc clamping system provides a rock-solid mounting with normal finger
• The
pressure on the clamp cross-bolt.
• Available in three finishes – bright, silver, and matte
MATTE
Aluminum
DetAchAble bAses
SILVER
Made to give your Angle-Loc Detachable Aluminum
Rings a solid base and a firm mount to your firearm
without adding unnecessary weight. Options include
both one-and two-piece models.
MATTE
SILVER
BRIGHT
Aluminum detachable Rings
ITEM
dIAMETER
dESCRIpTIon
fInISH
DT00001
DT00002
DT00003
DT00701
DT00702
DT00703
DT00901
DT00902
DT00903
DT00704
DT00705
DT00706
DT00708
DT00709
DT00908
DT00909
1"
1"
1"
1"
1"
1"
1"
1"
1"
30MM
30MM
30MM
.22 Cal.
.22 Cal.
.22 Cal.
.22 Cal.
Low
Med
High
Low
Med
High
Low
Med
High
Low
Med
High
Med
High
Med
High
Bright
Bright
Bright
Matte
Matte
Matte
Silver
Silver
Silver
Matte
Matte
Matte
Matte
Matte
Silver
Silver
C
B
A
Less ring gap for
cleaner lines and a
stronger mount
Made of 100%
aircraft grade
aluminum alloy
Millett Angle-Loc
clamping system
is rock solid and
detachable
Bases are
precision fit
and won’t
move under
heavy recoil
Easy to detach
with a coin
dIAMETER
dESCRIpTIon
fInISH
AL00019
AL00719
AL00919
AL00020
AL00720
TP00709
TP00710
1"
1"
1"
30MM
30MM
1"
30MM
Med
Med
Med
Med
Med
Med
Med (.22 Cal)
Bright
Matte
Silver
Bright
Matte
Matte
Matte
Aluminum Alloy Two-piece Bases
ITEM
BRAnd(S)
ModEL
fInISH
BB00715
BB00716
FN00705
KN00701
SB70710
Browning
Browning
FN Mauser, Interarms
Knight
Remington
Matte
Matte
Matte
Matte
Matte
WB70706
Winchester & Marlin
SB00710
Savage
A-Bolt
BLR, BAR
Mark X
MK-85
700 Series
70 Series &
MR-7
110
Matte
Matte
B
Now available in
all three finishes
Aluminum Vertical Split Rings
ITEM
Medium
Vertical Split
High
Medium
Low
Mounting screws are stronger than
traditional Weaver-style bases
Aluminum Alloy one-piece Bases
ITEM
BRAnd(S)
ModEL
fInISH
MB00708
RB00707
RB00708
RU00701
SB70710
WB70706
SB00710
Marlin
Remington
Remington
Ruger
Remington
Winchester & Marlin
Savage
336, 30AS Series
7400, 7600, 4, 6
740, 742, 760, SAV170
10/22
700 Series
70 Series & MR-7
110
Matte
Matte
Matte
Matte
Matte
Matte
Matte
Angle-Loc Detachable
1 In. SCopE RInGS
VERTICAL SpLIT SCopE RInGS
Vertical Split
.22 CALIBER SCopE RInGS
Aluminum Alloy
onE-pIECE BASES
Aluminum Alloy
onE-pIECE BASES
dETACHABLE CoMBo pAkS
59
ROCK-SOLID, EASY-TO-INSTALL SHOTGUN MOUNTS.
See-Thru Saddle MounTS
Millett® saddle mounts are easy to install, provide a rock-solid
foundation for your scope or red dot sight, and are custom-styled
for your shotgun. The lines are smooth and trim, with every bit of
excess bulk removed.
nEW picatinny shotgun rail
itEm
dEscription
PC00107
PC00108
Remington 870, pre-tapped receivers
Mossberg 500, pre-tapped receivers
shotgun saddle mounts
dEscription
part numbEr
Remington 870, 1100, 1187, 12GA.
Remington 870, 1100, 1187, 20GA.
Winchester 1300 12GA.
Winchester 1400, 1500 12GA.
Mossberg 500, 835, 12 GA.
Mossberg 9200 12GA.
SE00020
SE00045
SE00021
SE00023
SE00022
SE00044
SCOPE TO IRON SIGHTS
AND BACK, NO PROBLEM
See-Thru Scope MounTS
Millett See-Thru Scope Mounts are machined from aircraft quality aluminum
material to the tightest tolerances. Instead of simply being machined to fit a
particular receiver’s contour, all Millett See-Thru mounts feature our exclusive
Sure-Fit™ Contact Rails. This unique three-point design accommodates any slight
variation in the radius of the receiver, and provides the most rigid and accurate
mounting system available.
see-thru scope mounts
makE & modEl
smooth
mattE
Fits Weaver-Style Bases
.22 Cal Rings
Remington 700, 721, 722, 725
Remington 740, 742, 760, SAV 170
Remington 7400, 7600, 4, 6
SE00030
SE00014
SE00701
SE00707
SE00008
SE00730
SE00714
SE00708
combining Fast targEt acquisition With prEcision
sighting, thEsE millEtt sEE through mounts oFFEr thE
most in vErsatility For thE huntEr
60
ExclusivE
surE-Fit
contact rails
SMALL RING, BIG HOLD
handgun Mounts
Millett® handgun mounts, engineered with an exceptionally solid durability,
are a rugged, lightweight way to add an optical edge to your accuracy.
ruger super redhawk handgun mounts
Item
DIameter
DescrIptIon
FInIsh
RR77004
RR77006
PR00010
RR00011
TP00709
TP00710
1"
30MM
Base Only
Base Only
1"
30MM
Med
Med
Double Dovetail
Angle-Loc™
Med
Med (.22 Cal)
Smooth
Smooth
Smooth
Smooth
Matte
Matte
coLt anaconDa & pYthon moUnt.
DrILLInG anD tappInG reQUIreD.
rUGer BLacKhaWK, reDhaWK,
sUper BLacKhaWK, Gp 100 moUnt
61