full catalog as pdf - Gerstung International

WHAT’S AN
?
A thin layer of hard-wood plywood, supported by Gerstung Energy Blocks. The
design is determined by the primary use of the floor. It is a subfloor, the most
important part, that makes it a Gerstung floor, invented 50 years ago. The
result is an air cushion that provides amazing lifting power and
the base for a safe and cushioned landing.
The surface you dance on, may be
vinyl, wood or synthetic planks. It can
be reversable, permanent, in color or
with exotic design for home, studio,
stage or multi-purpose use.
Customization is what we do at no
extra cost.
LIFT OFF AND FLY ...
TAKE OFF AND LAND
OUR MOST POPULAR
AIRBASE SUBFLOORS
200
®
300
... for taking on tour or temporary setups.
(fast assembly, no tools)
400
®
... for private studios and schools.
(the dancers dream)
... for tap and portablity.
(easiest connecting system - no tools)
®
Dance surface,
vinyl or wood,
already installed
600
®
... for private use and start up facilities.
(an economical solution)
®
Custom Floors are our specialty!
DETERMINING THE
DANCE/WORKOUT SURFACE
IN WOOD OR VINYL
Primary Use:
Recommended Surfaces:
Ballet
Dance Vinyl™
Studio Vinyl™
Modern Dance
Wood Planks
Vinyls
Hip Hop
Wood Planks
Vinyl Planks
Dance Vinyl™
Tap Dancing
Unfinished Maple or Impregnated Oak Planks designed for tap
Ballroom Dancing
Finished Wood Planks
Vinyl Planks
Dance Vinyl™ (Reversible)
Lightweight PVC sheet vinyl in reversible black/gray. Rolled
out - seams are taped from the top. Least expensive solution.
Studio Vinyl™
A three-layer PVC fiberglass and foam combination for the
most demanding dancer and professional studios. The ultimate flooring from France in black or gray, suitable for permanent and removable installations.
Hardwood Planks
The selection of wood planking is a customized process,
depending on the activities on the floor and the taste of
the owner. We use thin engineered planks with 3-4 mm thick
wear surfaces, to assure many refinishing applications without interfering with the flexibility of the floor.
Vinyl Planks or Tiles
Our vinyl planks captures and duplicates the details and
varieties of natural wood or stone - an amazing reflection
of the real thing. A 20mill clear vinyl wear surface assures a
tough and extremely long lasting finish for high traffic areas.
A Perfect solution, if looks and maintenance matter, with
almost no maintenance.
EXTRAS YOU MAY NEED
Vented
Baseboard
Standard
Handicap Ramp
Cloth, Vinyl or
Doublefaced Tapes
Cloth Tape (most durable)
black or gray
180’ (55m) long rolls, 2” (5cm) wide
Vinyl Tape (temporary tape down)
black or gray
108’ (33m) long rolls, 1½ (3.8cm) wide
Double Faced Tape
To fasten vinyl, and other sheet goods
to the floor from underneath.
75’ (23m) long rolls, 2” (5cm) wide
Liquid Rosin
A non-slip solution that adds slip-resistance to all floors.
(wood, vinyl, tile, etc)
1 gal. (3.78lt) containers
300
®
STORAGE
TRANSPORTERS
For Floor Panels
These Floor Storage Transporters are essential for proper storage of the AB-300
panels. Transporting the floor has never been easier, right to the stage for assembly.
The design is of strong tubular steel and angle irons. Four heavy duty casters
allow one person to transport 16 to 22 panels to their desired location. Two strong
seatbelt straps keep the load secured.
For Vinyl Rolls
The only way a roll of sheet vinyl for dance is stored properly, is if the roll is
hanging, NOT laying or standing!
The Gerstung design of strong tubular steal and angle iron, built on heavy duty
industrial casters, facilitates just that.
A) Easy Transportation for 4, 6, or 8 heavy rolls.
B) Proper storage when vinyl is rolled up tightly on center cores and suspended
from a lifting pole with rubber handles on each end.
A must for any ballet floor that travels or is placed in storage.
Vinyl Storage
Transporter
Lifting/Hanging
Poles
GLASSLESS MIRRORS
Shatterproof, very lightweight, distortion
free, and it can’t fog up. The ideal
solution when portability or safety are
your key concerns. Glassless mirrors
consist of a rigid foam core bordered by
an aluminum frame. Across this frame a
high optical grade Mylar film is stretched.
Because of this construction, the panels
are incredibly lightweight. A 4’ x 8’ (1.2m
x 2.4m) panel weighs less than 10 lbs
(4.5kg). Wall mirrors come in 4’ x 6’ (1.2m
x 1.8m) or 4’ x 8’ (1.2m x 2.4m). Other
sizes can be custom ordered.
Floor stands for free standing mirrors are
available as well.
4’ x 8’ (1.2m x 2.4m) = 10lb (4.5kg)
4’ x 6’ (1.2m x 1.8m) = 7.5lb (3.4kg)
Floor Stands
For free standing mirrors.
Side Installation
Attached with 2 screws
Rear Installation
attached with hook
and loop fastener
BALLET BARRES
Floor Mounted Uprights
designs:
designer model
“the flare”
Heavy duty for ballet and
especially bar-fitness classes.
“the stick”
Single standard Ballet Barre
Floor Support.
Wall Mounted Brackets
designs:
Single Barre Bracket
Double Barre Bracket
Ballet Barre Rails
1 7/8” (5cm) thick ash - finish or unfinshed
4’ long (1.2m)
6’ long (1.8)
8’ long (2.4m)
Adjustable Wall Mounted Barres
by Alvas:
Chrome plated brackets with
1 3/8” (3.5cm) poplar rails.
4’ (1.2m) long
6’ (1.8m) long
8’ (2.4m) long
Or, any combination for any length
BALLET BARRES
FREE STANDING
Jr. Home Barres (extra light)
Economical, made of
alumunum tubing,
39” (99cm) high.
4’ (1.2m) long
6’ (1.8m) long
8’ (2.4m) long
Free Standing Barres
by Alvas:
Chrome plated, easily
adjustable from 31” (68½ cm)
to 45” (114cm), used from both
sides, assembled without tools.
Rails 1 3/8” (3.5cm) diameter.
4’ (1.2m) long
6’ (1.8m) long
8’ (2.4m) long
Free Standing Studio Barres
designs:
“double flayer”
Interesting, strong with extra leg room,
double rails, very stable, heavy base
with non-slip pads. Rails 1 7/8” (5cm)
thick Ash finished or unfinshed.
6’ (1.8m) long
8’ (2.4m) long
I N T E R N AT I O N A L
1400 coppermine terrace
baltimore,
maryland
21209
usa
[email protected]
tel: 800 922 3575
fax: 410 337 0471
alt tel: 410 215 0066