The Scissor Lift with better Access

››› HDS
The Scissor Lift with better Access
››The future‘s bright,
the future‘s Finkbeiner‹‹
This is what the future holds! Friendly surroundings, bright, minimum distances. Ergonomic
working procedures. The international patented HDS lift with its half-scissors guarantees you
absolute free and unequalled access within the working area.
Unlike other lift systems the HDS scissor lift needs no base frame on the floor and no trouble­
some cross connections. The special design grants you the very best access to the lifted
vehicle from all sides for maximum use. You can easily reach any part of the vehicle.
Your workbench with tools or parts can roll directly underneath the lifted vehicle without
any obstacles. Due to the vertical raise this innovative system saves valuable space in your
workshop.
The HDS scissor lift compared with other systems:
HDS lift with half-scissors
+ vertical rise
+ without base frame
+ no cross connections
+ free access from all sides
Parallelogram lift
- longitudinal movement when lifting
- troublesome base frame
- troublesome bottom cross connection
- access only from front and rear
Conventional scissor lifts
+ vertical rise
- troublesome base frame
- access only from front and rear
Working without dangerous
obstacles for more safety and
efficiency.
2
Open and bright working area
with best access from all sides.
The Finkbeiner HDS lift can be installed fully
recessed. Like this, the area can be used without
any restrictions when the lift is not in use.
››› innovative
Danger of accidents, steps and long
working areas, narrow space, dirt, gases,
fumes, varying height restrictions, no
daylight – this is not desirable.
A modern design of the working area is
motivating for your staff and convincing
for your clients.
3
››Flexibility of the HDS lift –
whatever the future will bring‹‹
Do you want to expand your workshop in the future? With the Finkbeiner HDS lift you stay
flexible. It can be installed easily anywhere – without expensive foundations. The lift can be
relocated to another area easily.
No matter what type of vehicles you may have in the future - this system works for all vehicles,
for compact short fork-trucks up to long truck and trailers. Long vehicles are lifted with two HDS
scissor lifts in tandem. The single lifts can also be used individually to work on two vehicles
separately. That’s the flexibility you need for all various operations for the future.
In daily use even under hard environment conditions the patented Finkbeiner HDS scissor lift is
characterised by its special economy. The moveable and wearing parts are at a minimum for
longer life expectancy. For better protection the hydraulic lifting cylinders are integrated underneath the runways. This increases safety of operation and ruggedness of the lift, which makes
this patented half scissor low-maintenance-system unsurpassable in the market.
Versatile: the HDS system is easy to install and
in the same way easy to relocate.
4
No misalignment when lifting, no extending parts to protrude
beyond the sides. The minimum space required for the lift
enables the optimum use of space in the workshop
High economy: performing all different work
on various height levels at the same time.
The two individual lifts of the tandem system
can also be used separately for the maintenance of two vehicles.
››› flexible
5
››Simple work procedures,
saving time and money –
day to day‹‹
Drive-on and work. The HDS scissor lift needs no set-up time and is immediately ready to lift
all types of vehicles. Press the push button at the central control unit and the vehicle is lifted to
the required height. Working at the wheels from the side or at the motor from the front – the
vehicle can be raised to the ideal working position, making the working area pleasant and
accessible.
Even at different load distribution the vehicle can be lifted without problems. For example you
may position a bus with the heavy rear overhang on the runways as far backwards as possible.
The free access saves precious time when working underneath the vehicle at the rear motor or
outboard units.
Trouble-free drive-on: just drive onto the
runways and the vehicle is ready to be
lifted.
6
Operation from the central
control unit: one push of the
button and the vehicle is raised
or lowered – fast and safe.
Positioning the vehicle with
overhang beyond the runways for
optimum of access to motor and
power units.
Double safety of load by
hydraulic and mechanical
locks.
Quick wheel change due to the
unique design: without base
frame the wheel carriage can
be positioned underneath the
runways.
››› effective
Ergonomic working and best access
for maintaining the rear motor and
power units.
7
››A complete system equipped
with all your needs‹‹
Used as a lift for inspection or for maintenance – the Finkbeiner HDS scissor lift is available with
various convenient accessories – like this you can individually adapt the lift specifications to your
own special requirements.
Axle lift with support bridge
Enables the lifting of an individual vehicle axle. The rolling axle lift integrated between the runways can easily be moved along the whole length. To use the axle lift for further axles the lifted
axle is lowered onto the support bridge which is also moveable along the runways.
Wheel carriage
Enables quick wheel service at the ideal working height with minimal effort (see pic. page 7).
Under body lighting kit
High intensity fluorescent lamps can be fitted to the inner edge of platforms giving total
illumination of the underside of the vehicle. No need for lead lamps and hazardous trailing wires.
Electric and pneumatic sockets for power tools
Easy handling of power tools with no hazardous extension cables. Directly plug-in your power
tools in the sockets integrated within the runways.
The oil system
For clean filling or discharging of oil at the vehicle. One or more hose reels with metering heads
are mounted within the runways and are easily accessible to or from an external tank.
Further accessories to suit the HDS scissor lift are available: e.g. portable platform lifts to assist
the removal of engines, transmission jacks etc.
Bright lighting underneath
the whole vehicle.
8
Integrated oil supply system for
quick and clean oil change.
No additional cables for power tools: the lift
can be equipped with pneumatic and electric
sockets.
››› individual
The movable axle lift: easily lifts axles for wheel
and brake maintenance. To free the axle lift for
further axles you lower the load onto a support
bridge, quickly and safely.
9
››As versatile as your
normal working day‹‹
The Finkbeiner HDS scissor lift is one of the most versatile in the market worldwide. It can be
used as a single lift or combined as a tandem lift for long vehicles such as truck-and-trailers and
articulated buses. The galvanised version is fully resistant to water, wash chemicals, salt and dirt
– thus ideally suitable even for washing.
Particularly the excellent access to all parts of the vehicle is what makes this system the most
versatile for all works such as maintenance or repair, bodywork, wheels, brakes, exhaust
systems, engines, gearboxes, etc.
For detailed information have a look on our website www.finkbeiner-lifts.com
or contact our sales agents.
Single
25/33 t
8 - 14,5 m
Tandem
50/66 t
16 - 18 m
Use in wash bays: The HDS scissor lift is also made
for the use in extreme environments.
10
Long single version
for articulated buses.
A short version is also available
for special vehicles.
Tandem version with brake tester and shaker plates integrated in a test lane.
Simultaneous working on the vehicle at different levels.
The stationary system can be installed in most places.
Operation of a tandem system with two individual single lifts.
Free access from all sides without troublesome base frames or cross connections.
The recessed version can be equipped with an optional automatic floor levelling
system.
››› versatile
11
››More than 80 years
experience – we know how to
lift heavy loads‹‹
Finkbeiner lifts are used worldwide to raise vehicles up to 100 tons for maintenance and repair.
As a leading company for workshop equipment, Finkbeiner, rich in tradition, gained great
experience and excellent know-how in design and manufacturing of vehicle lifts.
The Finkbeiner manufacturing program consists of lifts for cars, trucks, buses, forklifts, airport
vehicles, railway vehicles, and various special vehicles.
Mobile column lift EHB
for heavy duty vehicles
up to 45 tons
Mobile column lift EHB
for airport vehicles up to 60 tons
Mobile column lift EHB
for railway vehicles up to 100 tons
Walter Finkbeiner GmbH
Alte Poststrasse 9-11 . 72250 Freudenstadt . Germany
Fon +49 (0) 7441-40 31 . Fax +49 (0) 74 41- 8 77 78
[email protected] . www.finkbeiner.eu
Mobile column lift EHB
for special vehicles up to 60 tons
Stationary scissor lift HDS
for heavy duty vehicles up to
66 tons
technical changements reserved © Walter Finkbeiner GmbH 4/2009, 0010.0009b
Mobile 2-post lift FHB
for cars up to 3 tons