Exhaust - Mustangs Plus

Transcription

Exhaust
DR. GAS GIVES YOUR PONY ADDITIONAL HORSEPOWER, TORQUE & REDUCED EXHAUST NOISE!
MUSTANGS PLUS CARRIES A FULL LINE OF DR. GAS
CROSSOVER EXHAUST SYSTEMS FOR FORD
MUSTANGS & PERFORMANCE VEHICLES!
typical
installation
shown
Starting at
$189.95 kit
Would you like a product that will give your pony additional horsepower, torque, reduced exhaust noise, and has been proven by the best to work? Have
you noticed how the IROC Firebirds and several of the NASCAR race cars are sounding more like Indy Cars these days? That’s because they are using
the Dr. Gas Synchronizing Crossover Exhaust System! Since Sterling Marlin won the 1995 Daytona 500 with a Dr. Gas system on his car, many of the
other NASCAR teams are using it also. The reason is simple! The Dr. Gas Synchronizing Crossover Exhaust System is designed to work with any V6 or V8
exhaust system. Unlike other H and X designs, Dyno testing of the Dr. Gas Crossover shows a 1% to 5% gain in both torque and horsepower at all engine
speeds over open headers! Also, Dr. Gas reduces exhaust noise levels by 2dba to 6dba! We’ve used Dr. Gas on both the #4 Grabber Green Fastback and
#904 Grabber Green Coupe for the past 10 years and we can tell you from experience that it works! This mandral bent, 5 piece kit is a cut and weld to fit
your application, and is available in a variety of sizes to fit almost any application.
5-Piece Kits
Junction Only
5-Piece kits include the “X” junction, plus 4 each weld in place extensions
which marry up to your pony’s exhaust system.
2½” X 2½”
3” X 2½”
3” X 3”
3½” X 3”
3½” X 3½”
2½”X2½”
....................................................#591
....................................................#3547
....................................................#2978
....................................................#2771
....................................................#3548
Off Road Only:
85-94 5.0L with manual trans ....#6239
$184.95
$219.95
$199.95
$264.95
$249.95
kit
kit
kit
kit
kit
$209.95
kit
3” X 2½”
3” X 3”
2½” X 2½”
2½” X 2½”
3” X 2½”
3” X 3”
....................................................#4931
....................................................#6344
....................................................#4819
Converible or tight fit...................#14047
$139.95
$109.95
$ 99.95
$249.95
$309.95
$299.95
ea
ea
ea
ea
ea
ea
“JUST WHAT THE DOCTOR ORDERED!”
#12132
FEEL THE FLOW!
MANIFOLD PIPES
MUSTANG 67-70 V-8
67-70
V-8, 2.5” DUAL EXHAUST with Tru-X, exit options, 289/302/351 ci ..... #14809*
V-8, 3” DUAL EXHAUST with Tru-X, 289/302/351 ci............................. #14809*
AXLE-BACK SYSTEM
$190.95 pr
$190.95 pr
............#12135**
............#12133**
$497.95 ea
$654.95 ea
$190.95 pr
$190.95 pr
............#12134*
............#12132**
$497.95 ea
$654.95 ea
MUSTANG 64½-66 V-8
64½-66
V-8, 2.5” DUAL EXHAUST with Tru-X, exit options, 289 ci ................... #14808*
V-8, 3” DUAL EXHAUST with Tru-X, 289 ci........................................... #14808*
* Manifold Pipe Connections are 2.5” and inlet size may vary by application.
236 EXHAUST
**Will require modification to fit convertible.
www.mustangsplus.com
CALL TOLL FREE 1-800-999-4289
MUSTANGS PLUS
STEREOS 236
1964½ - ‘73
CATALOG
Exhaust
65-73 Shorty Super Exhaust Kit
65-73 Super Exhaust Kit
$559.95 kit
Your engine has to breath freely to run its best! Our Super Exhaust Kit will
help it do just that without breaking the bank! This great kit includes a pair
of Hedman Hedders with 3” collectors, a Dr. Gas 3”x2½” Crossover Kit and
a pair of 2½”x2½” Dr. Gas Spin Tech Mufflers.
$599.95 kit
Is space at a premium in your engine compartment? Our Shorty Header
Kit is the solution you’ve been looking for! This great kit includes a pair of
Hedman Shorty Hedders with 3” collectors, a Dr. Gas 3”x2½” Crossover
Kit and a pair of 2½” Hooker Aero Chamber Mufflers.
Mustang: Cpe, Fbk
65-70 260/289/302 (AT only). .......................... #8608
65-73 351W (AT only) ..................................... #8609
Cougar: Cpe
65-70 260/289/302 (AT only). .......................... #8608
65-73 351W (AT only) ..................................... #8609
Mustang; Cpe, Fbk
65-70 260/289/302 ..........................................#8604
65-73 351W .....................................................#8605
Cougar; Cpe
67-70 260/289/302 ..........................................#8604
67-73 351W .....................................................#8605
$ 559.95 kit
$ 559.95 kit
$ 559.95 kit
$ 559.95 kit
Flaming River Long Tube Header
$ 599.95 kit
$ 599.95 kit
$ 599.95 kit
$ 599.95 kit
65-73 Shorty Performance Exhaust Kit
Long tube w/HTC coating, designed to work with rack & pinion systems
65-73 1289, 302, A/T Only ............................... #14341
$ 595.00 kit
HEDMAN Tork Step Hedders
$759.95 kit
For performance with room to spare you’ll want this kit! We’ve packed it
with the best we have to offer and you will see the difference in how your
Mustang performs! Includes a pair of JBA Performance Nickel Plated
Headers with 3” collectors, a Dr. Gas 2½”x2½” Crossover Kit and a pair
of 2½” Hooker Aero Chamber Mufflers!
Mustang: Cpe, Fbk
65-70 260/289/302 .......................................... #8610
65-73 351W ..................................................... #8611
Cougar: Cpe
67-70 260/289/302 .......................................... #8610
67-73 351W ..................................................... #8611
$ 759.95 kit
$ 759.95 kit
$ 759.95 kit
$ 759.95 kit
Tork-Step Hedders, manufactured exclusively by Hedman Hedders, evacuate exhaust gasses from the combustion chambers faster than, and more
efficiently than, stock manifolds or a standard tube hedder. The increase in
available exhaust chamber volume allows for more fresh air/fuel mixture
to be drawn in, creating a purer fuel charge packed with more power. The
result is the tug you feel on the “seat of your pants” when you punch the
accelerator...better known as TORQUE.
Non coated1 1/2” to 1 5/8” primary, 3” collectors.
65-73 260, 289, 302 .........................................#12087 $ 282.95 pr
69-73 351w, A/T only........................................#12087 $ 279.95 pr
HTC coated1 1/2” to 1 5/8” primary, 3” collectors.
65-73 260, 289, 302 .........................................#12086 $ 574.95 pr
69-73 351w, A/T only........................................#12086 $ 574.95 pr
EXHAUST
237
Exhaust
Remember!
Every Hedman Hedder is
available with their exclusive
HTC Coating! Please call
your friendly Mustangs Plus
Salesperson for details!
#5282
Use #4916
to Install a 351W
In Your 65-66 Mustang!
Use #4917
to Install a 351W
In Your 65-66
Mustang!
Mustang;
65-70 260/289/302; 1 5/8” Primary; 3” Collector ... #5282
65-73 351W Conversion Header; 1 5/8” Primary;
3” Collector; Long Tube ............................... #4917
Falcon;
66-69 289/302/351w; 1 5/8” Primary; 3” Collector . #5282
Ranchero; Fairlane; Torino; Comet;
66-73 289/302/351w; 1 5/8” Primary; 3” Collector . #5282
Ranchero; Torino;
3” Collector; Long Tube ............................... #4917
Maverick;
69-77 302; 1 5/8” Primary; 3” Collector ................. #5282
Cougar;
67-73 289/302; 1 5/8” Primary; 3” Collector .......... #5282
69-73 351w; 1 5/8” Primary; 3” Collector ............... #5282
Hedman’s High Tech Coating (HTC), an exclusive alloy of metallic-ceramic composition,
is able to withstand extended temperatures
of 1300°! HTC is chemically bonded to the
header, resistant to abrasion and chipping,
oil and gas are easily removed, and they will
not fade or blue! Plus they carry a 5 Year
Guarantee!
$186.95 pr
$174.95 pr
$174.95 pr
$186.95 pr
$174.95 pr
$174.95 pr
$174.95 pr
#5317
Mustang;
65-70 260/289/302; 1 5/8” Primary; 3” Collector;
Long Tube; w/HTC Coating; .....................#5317
65-73 260/289/302; 1½” Primary; A/T only shorty;
2½” Collector Opening; w/HTC Coating; ...#7073
65-73 351W Header; 1 5/8” Primary; Shorty;
3” Collector Opening; w/HTC Coating ........#5927
65-73 351W; 1 5/8” Primary; 3” Collector;
Long Tube; w/HTC Coating .......................#5926
Falcon;
Ranchero; Torino;
66-73 351W Header; 1 5/8” Primary; Shorty;
3” Collector Opening; w/HTC Coating ........#5927
Ranchero; Fairlane; Comet;
Comet;
66-73 289/302; 1 5/8” Primary; 3” Collector;
Cougar;
67-73 289/302; 1 5/8” Primary; 3” Collector;
69-73 351w; 1 5/8” Primary; 3” Collector;
Maverick;
69-77 302; 1 5/8” Primary; 3” Collector;
#4916
$174.95 pr
High Temperature Ceramic Coated Headers
238 EXHAUST
HEDMAN Shorty Hedders
$461.95 pr
$461.95 pr
$464.95 pr
$464.95 pr
Falcon;
62-70 289/302; 1½” Primary; automatic only
2½” Collector Opening; ..............................#7072
Mustang;
65-73 260/289/302; 1½” Primary; automatic only
3” Collector Opening; .................................#4916
79-85 5.0L/EFI/Fox Chassis; 14 Ga. 1 5/8” Tube #7108
86-93 5.0L/EFI/Fox Chassis; 14 Ga. 1 5/8” Tube;
Equal Length Tubes ...................................#5318
86-93 5.0L/EFI/Fox Chassis; 14 Ga. 1 5/8” Tube .#6356
94-95 5.0L/EFI/Fox Chassis; 14 Ga. 1 5/8” Tube;
Equal Length Tubes ...................................#5319
Fairlane;
Cougar; Ranchero; Torino
3” Collector Opening; .................................#4916
Cougar;
Mavrick;
$174.95 pr
$174.95 pr
$186.95 pr
$186.95 pr
$284.95 pr
$219.95 pr
$314.95 pr
$174.95 pr
$186.95 pr
$174.95 pr
$174.95 pr
MUSTANGS PLUS CARRIES THE PARTS YOU
NEED TO MAKE YOUR MUSCLE MUSTANG
“SOUND GOOOOOD!”
$461.95 pr
$464.95 pr
$461.95 pr
$461.95 pr
$461.95 pr
$461.95 pr
$461.95 pr
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Exhaust
JBA Shorty Headers
Ford Oval
Pony
Standard
Ford Oval Exhaust Manifold Bolts
289-302 Exhaust manifold chrome bolts .........#11100
$ 37.95 set
302 Exhaust manifold stainless bolts ..............#11218
$ 39.95 set
Pony Logo Exhaust Manifold Bolts
Header 7/16” Stainless bolts ...........................#12737
$ 39.95 set
Standard Exhaust Manifold Bolts
302 Exhaust manifold chrome bolts ................#11246
$ 24.95 set
302 Exhaust manifold stainless bolts ..............#11219
$ 31.95 set
Ford Oval Header Bolts
Header 7/16” chrome bolts ..............................#11097
$ 37.95 set
Pony Logo Header Bolts
Header 7/16” Stainless bolts ...........................#12728
$ 31.95 set
Standard Header Bolts
Header 7/16” chrome bolts ..............................#11239
Header 7/16” stainless bolts ............................#11238
$ 29.95 set
$ 19.95 set
65-70 Complete JBA Exhaust Package
JBA Shorties can’t be beat! These
heavy steel (14 gauge), Stainless
Steel headers will give your car
the power and style you’ve been
looking for!
Includes flanges and gaskets.
JBA Shorties can’t be beat! These heavy steel (14 gauge), Stainless Steel
headers will give your car the power and style you’ve been looking for!
Includes flanges and gaskets.
Mustang;
65-73 260/289/302; 14 Ga 1 5/8” Tube;
65 Uses 66-70 Motor Mount .....................#4830*
65-73 351W; 14 Ga 1 5/8” Tube .........................#7107
65-73 351w; T-5 with clutch cable; 1 5/8” tube ...#11905
86-93 5.0L14 Ga; 1 5/8” Tube ............................#4862
94-95 5.0L; 14 Gauge 1 5/8” Tube .....................#6358
$396.95
$589.95
$596.95
$359.95
$479.95
Cougar;
67-73 289/302; 14 Ga 1 5/8” Tube; ....................#4830*
67-73 351W; 14 Ga 1 5/8” Tube .........................#7107
65-73 351w; T-5 with clutch cable; 1 5/8” tube ...#11905
$396.95 pr
$589.95 pr
$596.95 pr
pr
pr
pr
pr
pr
JBA Coated Shorty Header
JBA H-pipes are designed to mate perfectly with
your new headers and exhaust system without
giving up valuable ground clearance. These
pipes feature high flowing 2.5” mandrel-bent
stainless steel tubing and 3 bolt laser-cut flanges for long lasting performance and durability.
Exhaust System Features:
#11311
•
•
•
•
•
Awesome classic sound
Smooth flowing mandrel-bent tube
Aluminized steel construction
Fully welded JBA mufflers
Low profile design for maximum ground
clearance
• High quality hardware
• Performance matched to work with JBA
Headers
• Simple installation
Kit consists of part numbers 4830, 12311 and 14050
65-70 JBA Exhaust Package............................. #14051
$995.00 kit
Mustang;
65-73 351w; Ceramic coated header ..............#11311
65-73 351w; w/titanium coating ........................#10657
65-73 260/289/302; Ceramic Coated; .............#7133*
65-73 351w Silver ceramic, .............................#13743
65-73 5.0/EFI conversion titainium coated .......#7116*
$
$
$
$
$
766.95
754.95
571.95
771.95
571.95
pr
pr
pr
pr
pr
Cougar;
67-73 351w; ceramic coated header ...............#11311
67-73 351w; w/titanium coating ........................#10657
67-73 289/302; ceramic coated; ......................#7133*
67-73 5.0/EFI Conversion; titainium coated .....#7116*
$
$
$
$
766.95
766.95
571.95
571.95
pr
pr
pr
pr
*Manual Trans use #10246 equalizer bar for proper fit
EXHAUST 239
Exhaust
JBA Shorty Header Starter Tube Kit
JBA Long Tube 289/302 Header
#13169
1¾” Primary tubes, 3” collector
65-73
65-73
289/302 Long tube; plated steel;
with AOD or C6 transmissions. ............#11972 $ 816.95 pr
289/302; ceramic coated; .....................#12074 $1,099.95 pr
289, 302, 351w, w/out O2 sensor, kit includes starter tube and flanges.
All
All
JBA Tri Y Header
W/out O2 sensor, .................................... #13169
With O2 sensor, ...................................... #12303
$ 39.95 kit
$ 46.95 kit
JBA H-Pipe
#12311
65-70
289/302, Ceramic coated ....................#12677
$ 859.95 pr
JBA Long Tube Tri Y Header
#12482
For FE Engines
67-70
67-70
Stainless steel (5 spd) 390/427/428 ....#12481
Silver Ceramic (5 spd) 390/427/428....#12482
$ 816.95 pr
$1,099.95 pr
JBA Long Tube Tri-Y Headers
For the perfect fit and maximum performance, use a JBA H-pipe with your
new JBA Headers and Exhaust System. JBA H-pipes are designed to mate
perfectly with your new headers and exhaust system without giving up valuable ground clearance. These pipes feature high flowing 2.5” mandrel-bent
stainless steel tubing and 3 bolt laser-cut flanges for long lasting performance and durability.
65-70 V8, 2-1/2”, for use with JBA 351w
shorty headers has 02 bungs ................. #12741 $ 184.95 kit
65-70 V8, 2-1/2”, for use with JBA 289/302
shorty headers has 02 bungs ................. #12311 $ 174.95 kit
67-70 V8, 2-1/2”, for use with JBA FE TRI-Y
headers. 390/427/428 ............................ #12263 $ 174.95 kit
TITANIUM CERAMIC
Titanium ceramic coating gives the best thermal protection and corrosion
resistance. Reduces underhood temp. Has “titanium” grey color. Extreme
duty. Will not fit standard 390 cylinder head. Head flange is designed for
14 bolt 390 gt cylinder head only. Fits most rack and pinion conversions.
Requires power steering ram drop down bracket, for use with factory power
steering.
67-70 390/427/428/cj c6/4spd ......................... #14296
JBA Side Exhaust
$1,109.95 pr
SILVER CERAMIC
Silver ceramic coated tri-y header. Will not fit standard 390 cylinder head.
Head flange is designed for 14 bolt 390 gt cylinder head only. Fits most rack
and pinion conversions.Requires power steering ram drop down bracket, for
use with factory power steering.
67-70 390/427/428/cj c6/4spd ......................... #14297
*Manual Trans use #10246 equalizer bar for proper fit
240
EXHAUST
$1,109.95 pr
65-70 V8, 2-1/2”, R-Model dual side exit. ......... #12412 $ 249.95 kit
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Exhaust
JBA Exhaust Kits
V8 Exhaust Manifolds
FREE FLOW FACTORY EXHAUST MANIFOLDS
#14050
Exhaust System Features:
Awesome classic sound
Smooth flowing mandrel-bent tube
Aluminized steel construction
Fully welded JBA mufflers
Low profile design for maximum ground clearance
High quality hardware
Performance matched to work with JBA Headers
Simple installation
65-70
65-70
V8’ 2-1/2”, dual rear exit through
valence, trumpet chrome tips ............ #12125
V8, 2-1/2”, dual rear exit
with turn downs ................................. #14050
$ 469.95 kit
$ 469.95 kit
Falcon; Ranchero; Fairlane;
63-67 289; Hi-Po .................................................#1116 $ 315.95 pr
Mustang;
65-73 289; Hi-Po .................................................#1116 $ 315.95 pr
Cougar;
67
289; Hi-Po .................................................#1116 $ 315.95 pr
#1116 is factory correct for 65-67 289 High Performance engines, but will
fit 260, 302, & 351W in most Ford applications.
All;
All
260/289/302; Standard ..............................#5038 $ 229.95 pr
6 Cylinder Shorty Header
Tri-Y Headers
Comet; Falcon; Ranchero; Fairlane; Torino; Maverick;
63-77 170, 200; painted dual exhaust header
w/port divider, collectors and gaskets....#10017 $ 399.95 ea
Mustang;
65-73 170, 200; painted dual exhaust header
w/port divider, collectors and gaskets....#10017 $ 399.95 ea
#1742
Classic Looks!
Great Price!
If you want classic Shelby styling for your Mustang project, these headers will
fill the bill! The smaller tube diameter will actually increase your Mustang’s
low end torque for quicker launches!
Mustang;
65-70 260/289/302 ........................................... #1742
65-70 260/289/302; Ceramic coat .................... #4525
Cougar;
67-70 260/289/302 ........................................... #1742
67-70 260/289/302; Ceramic coat .................... #4525
#1116
#5038
6 Cylinder Exhaust Manifolds
$ 149.95 pr
$ 289.95 pr
$ 149.95 pr
$ 289.95 pr
86-93 GT 40 P Ceramic Coated
Stainless Steel Shorty Headers
Cast from high quality molds for proper fit and appearance. Includes exhaust
flange bolts, nuts, and washers.
Comet; Falcon; Ranchero; Fairlane; Torino; Maverick;
63-77 6 Cyl; 170/200 ......................................... #6905 $ 124.95
63-77 6 Cyl; 200/250; w/o Smog ....................... #5200 $ 199.95
Mustang;
68-67 6 Cyl; 170/200 ......................................... #6905 $ 124.95
68-70 6 Cyl; 200/250; w/o Smog ....................... #5200 $ 199.95
ea
ea
ea
ea
Header Bolt Kit
Mustang;
86-93 Fits production GT 40 P head,
5.0 shorty headers................................... #11253
These kits fit most V-8 and many other engines. Includes (16) bolts and
locking hardware.
$ 369.95 pr
All
Stage 8 locking header bolts. ...................#5384
$ 63.00 kit
EXHAUST
241
Exhaust
Lock Bolt Kit
Spin Tech Ultra Performance Muffler
#2237
65-66 Manifold Bolt Kit; 40 pc.............................#7331
65-67 Exhaust Manifold bolt kit; w/bolts & locks;
for Hi Po manifolds ...................................#6512
$ 22.00 set
$ 26.00 kit
Manifold Lock Tabs
65-66 Lock Tabs V8; Set of 8 ............................ #3040
$ 15.95 set
All
All
All
All
All
Gaskets
#409
65-73
65-73
65-73
65-73
65-73
65-73
Used with great success on our #4 Grabber Green Fastback, Spin Tech Ultra
Performance mufflers small size and weight with highly efficient flow characteristics and attenuation are unmatched by any other performance muffler.
Extensive use of dynamic and thermodynamic principles reduces turbulence.
Loss of flow cross section is reduced by the application of advanced fluidics
technology. In plain english, they are free flowing and reduce noise!
2¼” inlet/outlet ........................................ #2237
2½” inlet/outlet ........................................ #3674
3” inlet/outlet ........................................... #3135
3” Center inlet/outlet ............................... #12165
3½” inlet/outlet ........................................ #2242
$ 85.95
$ 85.95
$ 85.95
$ 85.95
$135.95
ea
ea
ea
ea
ea
#3198
Exhaust Manifold; 170/200
#4095
Collector; 2½”; Triangular .......................#3198
Collector; 3”; Triangular ..........................#510
Collector Gasket; 3½”.............................#6971
Header Mounting; 289/302/351W ..........#3369
Header gasket, 289/302/351W, Oval ....#13810
$
$
$
$
$
$
10.95
14.95
12.95
12.95
34.95
9.95
ea
pr
pr
pr
pr
pr
$ 4.95
$ 19.95
ea
ea
Super Competition Aero Chamber
Cylinder Head Plugs
#66
#7156
66-69 Installs Above Spark Plugs .....................#66
66-69 Installs At End Of Head ..........................#7156
DR. GAS SPIN TECH 2½” SIDE EXHAUST KIT
#6442
The Super Comp’s aerodynamically designed chambers flow 23% better than
the most popular high performance brand and produce more horsepower and
torque than all other popular chambered mufflers! Featuring all aluminized
and stainless steel construction, these mufflers will give your Mustang a
throaty powerful sound that will not change with time!
60-05 2½” Inlet/Outlet ......................................... #6442
79-05 2½” Inlet/Outlet; Fox Chassis ................... #6361
$138.95 ea
$ 91.95 ea
64-66 V8 Muffler Single Exhaust
The Side Exit Exhaust System is designed as a universal fit system. These
systems have an aggressive sound that is more moderate with the windows
down, yet have very acceptable levels with the windows up. Makes 12 more
horsepower than the walker Race Bullets and is noticeably quieter.
All
.............................................................. #11639
$479.95 kit
Restoration is easy when you get all the
parts and accessories from Mustangs Plus!
242
EXHAUST
Features fully aluminized double wall construction, exact OEM dimensions
and proper attaching brackets when required. Easy to install
64-66 V8 muffler / single exhaust...................... #14629
$63.95
ea
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Exhaust
Mac Performance Tail Pipes
Mach I Exhaust Tips
71-73 Chrome Mach I exhaust tips........................#9053
Concours Chrome Exhaust Tips
You’ve installed your new headers, Crossover, and Spin Trap mufflers, now
finish the job right with these great full length tail pipes! Designed specifically to compliment the performance exhaust products, these 2½” pipes are
pre-bent and ready to install. They run from the muffler, over the axle to the
rear of your Mustang and feature a high temperature coating for years of
dependable service!
65-66 2½”; HTS Coated: w/turn down tips ............#2979
65-66 2½”; GT Style ..............................................#3009
$ 34.95 ea
$189.95 pr
$189.95 pr
TD Performance Hot Tips
Steel exhaust tips that are an exact reproduction w/o the long tail pipe.
These tips can be added to your existing system up to 2¼”.
70
#5323
#5321
These weld-on exhaust tips are made of heavy duty steel, chrome plated, and
have built-in resonators to give your Mustang a nice beefy sound. Choose
single end for a stock-like look or dual tip for the GT look!
60-73
60-73
60-73
60-73
60-73
2”x14”; Dual Tip ...................................... #5323
2¼”x14”; Dual Tip ................................... #5324
2”x9”; Single Tip ..................................... #5320
2¼”x9”; Single Tip .................................. #5322
2½”x9”; Single Tip .................................. #5321
$ 54.95
$ 54.95
$ 16.95
$ 24.95
$ 24.95
GT & Mach I .......................................... #12174
$129.95 pr
1967-68 Eleanor Style Exhaust Tips
ea
ea
ea
ea
ea
65-69 GT Style Exhaust Tips
67-68 Cast aluminum ......................................... #12180
$359.95 pr
67-68 (Eleanor side skirt modification required) . #10153
$119.95 pr
#410
#447
#12173
65-66 1¾”; 289 w/dual exhaust.;
Factory style trumpets .............................. #410
67-69 2”; 289/302/390/427; polished finish ........ #447
65-66 6” long 2” inch pipe to fit
modified exhaust ..................................... #12173
$ 51.95 pr
$ 99.95 pr
$104.95 pr
EXHAUST 243
Exhaust
T HE MUSTANGS O F MU STA NGS PL US
By Ron Bramlett
When you buy Mustang parts from Mustangs Plus, you know we have first hand experience with the parts we sell. Over the years, we have owned and
built a lot of Mustangs and believe it or not, we still own most of them! Here are a few of the Mustangs in the Bramlett’s stable!
#1.) My “IN ORIGINAL CONDITION”
Springtime Yellow ‘66 factory High Performance GT Coupe. I bought this car from
the original owner in 1981 and have driven
it only 2000 miles since. It’s on display in
the our showroom.
1
Bought in 1981
3
#2.) The Black ‘65 Coupe we built in 1982
to help us sell parts. This car was my driver
for many years until my kids got too big to
all fit in the back seat! Today Cindy and I
drive it to Mustang car shows all over the
country. We drove it to Charlotte for the
40th Mustang Anniversary Show in 2004.
2
Built in 1982
4
#3.) We built the Ronster in 1995-96. I’d
always wanted a two-seat roadster Mustang and saw the opportunity while we
were building the Retractable Hardtop. It
uses the same chassis strengthening kit
and other components. We were proud
it was chosen to be the cover car for the
September 1997 issue of Mustangs and
Fords Magazine.
Built in 1995-96
5
#4.) We’ve used the #4 Grabber Green
Fastback to develop our Grab-A-Trak
suspension product line as well as many
other parts over the years. This shot shows
it at one of the many track events that we
take it to each year.
Built in 1986
6
#5.) The G. T. 350 C Prototype was built
here at Mustangs Plus with the direction
of Wilhelm Motor Works. At the time, September of 2005, Jon Wilhelm had an agreement with Shelby to build G.T. 350 C’s.
Built in 2005
7
#6.) In 1991, we built the Grabber Green
904 Coupe for George Galoosis Sr. to
take to the track. I looked for a photo of it
sitting still but it hardly ever stays still long
enough for a picture!
Built in 1991
8
#7, 8, & 9.) As the Bramlett kids grew up,
we had to build Mustangs for them. #7 and
#8 are David’s son’s cars, Greg Bramlett
and Jeff Bramlett. #9 is my son’s, Ron
Bramlett Jr, car, for some reason all the
kids want coupes.
#10.) In 1995, we built our 1964 1\2
Retractable Hardtop.
Built in 1994
9
Built in 1996
244
EXHAUST
Some of our other Mustangs include a
pair of ‘66 6 cyl. coupes, a ‘66 4-speed
GT Coupe, a ‘66 convertible, a ‘84½ Anniversary Coupe and Convertible, a ‘85
Saleen (#38), a ‘85 GT Hatchback, a ‘86
GT convertible, a ‘88 McLaren, a ‘95 Cobra
Hardtop Convertible, a ‘96 4.6 GT convertible, my son Richard Bramlett’s Colt 351, a
1966 Fastback road racer project car, our
newest project, The Monster Ronster and
a couple of projects still under construction! See these cars and their stories in
our future newsletters!
Built in 1995
10
Built in 1995
MUSTANGS PLUS
1964½ - ‘73
CATALOG

Exhaust - Mustangs Plus

Transcription

Similar documents

23 exhaust.indd

Johnny Tremain by Esther Forbes Objectives

Silencer and Non-silencer Raincaps

CYLINDER KIT WITH POWER VALVE SYSTEM

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

automotive crate engines

“X” Marks The Spot - GTR High Performance

Saebo Evaluation and Treatment Kit

Gravlax Kit Guide and Information

LGOBO SALE SHEET

Surprising Ways That Your Building Wastes Energy