34 Drawing Equipment

34 Drawing Equipment
A um um
S
h d
S
A um um
h d
CARB
Compliant
CARB
Compliant
ALVIN® Portable Parallel Straightedge Board
The convenience of a studio work surface in a compact, portable unit. Made from a smooth, warp-free
white Melamine® laminated board and equipped with a convenient carrying handle, non-slip tractor feet
designed to grip the table edge at the perfect drawing angle, foldaway legs, and an acrylic straightedge
whose height can accommodate material thicknesses up to 3/16". Shipped fully assembled.
• Precision-made aluminum straightedge with rubberized grip eliminates the need for a T-square and includes
an inking edge for clean, smudge-free results with pens, pencils, and markers. Underwire system keeps the
blade parallel no matter where it is moved. Metal side brackets accommodate material thicknesses up to
3/16" beneath. Twin braking system locks blade securely in any position.
• Non-slip rubber grip-tracks on the underside of the board allow the PXB to overhang the table edge at the
perfect drawing angle bringing the work surface closer.
• Foldaway back legs with rubber feet are unbreakable and enable use in either the flat or angled position.
• Warp-free white Melamine® laminated board offers a smooth drawing surface that wipes clean with
a damp cloth.
No.
Size
Weight
SRP
• Comfortable carrying handle for portability.
PXB21
16" x 21"
8 lbs.
$100.00 ea
• Compact for out of the way storage.
PXB24
18" x 24"
10 lbs.
109.00 ea
PXB26
20" x 26"
12 lbs.
112.00 ea
PXB31
23" x 31"
15 lbs.
135.00 ea
PXB36
24" x 36"
20 lbs.
145.00 ea
PXB42
30" x 42"
26 lbs.
175.00 ea S
P
ALVIN®
Lightweight
Portable
Parallel Straightedge Board
All the features of PXB boards but in a
lightweight, easy-to-carry version. Made from
lightweight LB series boards that have unfinished
wood veneer surfaces top and bottom, aluminum
side edges and hollow honeycomb interior. Solid
wood edges and center cross frames provide
strength and rigidity and are strategically placed
to support the handle and legs.
No.
PLB24
PLB26
PLB36
Size
18" x 24"
20" x 26"
24" x 36"
Weight
4 lbs.
4.9 lbs.
5.4 lbs.
SRP
$109.00 ea
120.00 ea
149.00 ea 1101
-L
h d
PRESTIGE™ PXB™ Series
Soft-Sided Portfolios
CARB
Compliant
No.
DPX36
DPX42
Size
24" x 36"
30" x 42"
Weight
22 lbs.
33 lbs.
SRP
$279.00 ea
319.00 ea ALVIN® eluxe Board with Straightedge
Durable Phenolic blade keeps parallel by gliding up and down on guide wires. Nylon bearings under
straightedge assure smooth running action. Features include an elevated acrylic inking edge for smudgefree results, a twin braking system to lock straightedge securely in any position, rubber grip tracks that
allow board to overhang a table edge for a comfortable working angle, and foldaway legs with non-slip
rubber feet. Portable, with convenient carry handle, the 30" x 42" size includes a second handle mounted
in the middle of the back for extra convenience. Compact design is fully assembled and ready to use.
VYCO VBC77 gray/white vinyl board cover included for a soft, protective work surface (gray side shown).
Designed to carry Alvin® PXB and PLB Drawing
Boards but versatile enough for any number
of other carrying functions. Roomy enough
for carrying extra project supplies and pads.
Extendable length handles serve as shoulder
straps with a third handle for extra control. Side
zippers and Velcro® fasteners at top for easy
access. Constructed of durable nylon with a
7½" x 9" outside pocket and 1½" reinforced
gusset along the bottom.
No.
SPX1621
SPX1824
SPX2026
SPX2331
SPX2436
SPX3042
Content
Dimens.
16" x 21"
18" x 24"
20" x 26"
23" x 31"
24" x 36"
30" x 42"
Fits
SRP
PXB21
$22.95 ea
PXB24, PLB24 27.95 ea
PXB26, PLB26 32.95 ea
PXB31
38.95 ea
PXB36, PLB36 45.95 ea
PXB42
63.95 ea Drawing Equipment
KOH-I-NOOR®
Interior Design Drafting Kit
CARB
CARB
Compliant
Compliant
HERITAGE Artist Sketch Boards
™
Made of extra rigid 4mm tempered Masonite® with
cutout handle, smooth edges, and firm spring
clips. Rubber band is included with each to hold
paper securely in place.
No.
SB1516
SB1819
SB2326
SB2838
JRB
Description
15½" x 16½", 1 clamp
18½" x 19½", 1 clamp
23½" x 26", 2 clamps
28" x 38", 2 clamps
Replacement Band
SRP
$9.25 ea
10.75 ea
16.50 ea
26.00 ea
0.60 ea 35
HERITAGE™ Gridded Sketch Boards
Made of extra rigid 4mm Masonite® with cutout
handle, smooth edges, and firm spring clips. White
surface front and back with black 1" grid lines and
1/4" hash marks. Rubber band included.
No.
GB1516
GB1819
GB2326
JRB
Description
15½" x 16½", 1 clamp
18½" x 19½", 1 clamp
23½" x 26", 2 clamps
Replacement Band
SRP
$14.50 ea
17.00 ea
25.00 ea
0.60 ea Contains everything needed to complete a
redesign or remodeling of a house, condo, or
apartment. Kit includes a 13" x 18½" drawing
board, interior design template, triangle set,
protractor, and paper. Drawing board accepts
media up to 11" x 17" and is graduated in inches
with graduated scales on side paper clamp.
Lockable transparent straightedge and non-slip
feet located under the board.
No. 522130INT
SRP $52.30 ea CARB
Compliant
KOH-I-NOOR® Creative Drawing Board
ALVIN® Masonite® Board For
University Series Soft-Sided Portfolios
Adds stiffness to soft-sided portfolios.
No.
SPM17
SPM20
SPM23
SPM24
Size
For 17" x 22" portfolio
For 20" x 26" portfolio
For 23" x 31" portfolio
For 24" x 36" portfolio
SRP
$8.00 ea
11.50 ea
12.50 ea
18.00 ea AMES Draft-Pak
Portable Drafting System
A completely self-contained system that
includes a drawing board with parallel blade, a
tilting mechanism for board angle, and a storage
compartment for tools. Easily converts to a
convenient briefcase with carrying handle. The
drafting surface is reversible to put parallel blade
inside case for protection when transporting.
The drawing can be left in place when the unit is
closed. Acrylic parallel blade for highest clarity
and dimensional stability will not discolor and is
not affected by sun or water. The cord mechanism,
which keeps the blade parallel, is enclosed
for trouble-free operation and provides easy
adjustment of blade.
No.
Description
SRP
1218C Accommodates 12" x 18" paper $138.00 ea
1824C Accommodates 18" x 24" paper 155.00 ea HERITAGE™ Sketch Board Value Pack
SB2326 sketch board (23½" x 26") and SP2427
soft-sided art portfolio shrink-wrapped together.
No. VP2326
No. 25434
SRP $118.00 ea
SRP $41.95 pk
ALVIN® AX Series Drawing Boards
A smooth, warp-free white Melamine® laminated
board with black edges. The non-slip tractor feet
firmly hold the drawing board at a comfortable
angle. Contoured handle for comfortable carrying.
No.
AX617/2
AX617/3
AX617/5
Sized 14¾" x 19½" for media up to 11" x 17".
Graduated in inches with graduated scales on
top and side in inches. Lockable transparent
straightedge and paper clamps in three areas to
secure media. Reversible feet included to elevate
drawing surface 7° or 15°. Vinyl carrying
case included.
Size
18" x 24"
20" x 26"
24" x 36"
Weight
9 lbs.
11 lbs.
17 lbs.
SRP
$58.00 ea
64.00 ea
86.00 ea Drawing
board
head
LINEX
Portable Drawing Board
Deluxe portable 11" x 17" drawing board in
carrying case. All scales graduated in inches.
Features include ruler on straightedge graduated
in inches and two locking mechanisms for better
stability. Clamps hold paper firmly in place. Perfect
for sketching, diagramming, drafting, and teaching.
Optional drawing board head features ruler
graduated in inches, 15° indexing, and precision
adjustment of any angle. Inverse scale 0-90°.
Locking system keeps the ruler in a fixed position.
Usable as a hatching aid as well.
No.
Description
LX3045 11" x 17" drawing board LXR300 Drawing board head
SRP
$135.00 ea
70.00 ea
36 Drawing Equipment
ALVIN® TOM
Drafting Machine
Track-type drafting machine
complete with drawing board
that features a modern and
compact, precision design.
Functional drawing board
with precision ball bearing,
vertical sliding track drafting
system, and break lever on
vertical sliding track offers
three positions. 150° doublehinged drawing head with two sets
of Plexiglas® scales included, one
set metric, the other is in full and half
inch graduations. Complete system weighs 20 lbs. with a work surface area
of 19 ½"h x 22"w. Adjustable stand allows board angle at 0°, 20°, and 45°.
Can be used along with CAD furniture set up. Carrying case protects parallel
straightedge and provides convenient portability. Shipping weight 22 lbs.
ALVIN® Track Drafting Machines
Smooth and effortless tracking is accomplished by 14 uniquely designed flat
face bearing rollers strategically placed for precise vertical and horizontal
movement at any board angle. A comfortably designed palm rest and thumb
release allows easy rotation of the protractor head with convenient 15° auto
index settings and intermediate lockable fine line adjustment. The 360°
protractor head with built-in magnifier is divided into single degrees with
five-minute double vernier permitting angular accuracy to 1/12 of a degree. A
double action hinge system allows the head and scales to be tilted vertically
from the board surface for a clear working view and also allows the head
to sit flat on the board compensating for any board irregularities. A floating
head mechanism positions the protractor above the surface to protect against
accidental smearing or tearing of drawing media. An exclusive feature is
the positive double shoe braking system with dual-lever fingertip operation
precisely controlling and locking both horizontal and vertical movement,
ensuring complete straight lines. Additional features include a one-touch lever
to install or dismount the vertical track and an adjustable vertical track support
roller to accommodate both varying board depths and thicknesses. Each
machine comes with a full protective plastic dust cover large enough for both
machine and drawing surface.
No.
BDM42
BDM48
BDM60
BDM72
Fits Board Size
31" x 42"
36" x 48"
371/2" x 60"
371/2" x 72"
Shipping Weight
18 lbs.
20 lbs.
22 lbs.
241/2 lbs.
SRP
$1195.00 ea
1250.00 ea
1295.00 ea
1350.00 ea Note: Only VAM series scales will fit BDM machines.
Scales sold separately.
Alvin® VAM Series Scales
for BDM Drafting Machines
Scales feature an aluminum center core
and a clear acrylic edge.
Alvin® VAP Series Universal
Drafting Machine Scales
VAM Series
VAP Series
Scales feature an aluminum center core
and a clear acrylic edge. Scales fit all
Vemco drafting machines. The brass
bushing universal chucks accommodate
most other drafting machines. Inch and foot
scales available in 12" and 18" lengths.
Non-smudging
raised scale design
VAM-7-12
VAM-7-18
VAP-7-12
VAP-7-18
12"
18"
VAM-11-12
VAM-11-18
VAP-11-12
VAP-11-18
12"
18"
VAM-13-12
VAM-13-18
VAP-13-12 12"
VAP-13-18 18"
Graduations
(both sizes)
First Side;
Second Side
Divisions SRP
size to ⁄ "; Full
{ Full
half size to ⁄ "
Open { ¼"⁄ " == 1';1'
Open { 1"¼"&&½"⁄ "==1';1'
Full
Full size to ⁄ "; { full
size ⁄ "
1
1
1
16
16
8
1
8
1
1
SRP $1060.00 ea ALVIN®
Easel and Board Stand
Constructed of walnut-stained
wood and adjustable to four
convenient drawing angles, from
flat to 45°. The unique design
rests over the edge of a table or
desk to prevent slipping. Once in
place it provides a rigid frame for
sketch boards, standard drawing
boards, and pre-stretched canvas
plus a built-in pencil rest. In
seconds, it can be opened for use
or closed for storage. Accommodates 18" x 24" to 20" x 26" boards.
No. DS722
SRP $39.00 ea
SPIROLL
Drawing Protectors
An architect-designed drafting
accessory that attaches to the
front edge of any drawing board.
Slide the drawing down into
Spiroll, the coiled lower part
will be safely housed within
an aluminum extrusion, while
working on the upper portion. Vinyl board cover can be installed over the
spiral mounting bracket. Comes with a pair of standard Lexan clips for the
attachment of parallel straightedge cables at any location. For use with all
conventional instruments, including drafting machines and T-squares.
No.
Length of Extrusion*
Max Width of Drawing
SP142 42"
41"
SP148 48"
47"
SP160 60"
59"
SPC
Two replacement end caps RC1
Replacement clips (2/pk) for attaching straightedge
* Plastic end caps extend 1/2" beyond each end of extrusion.
SRP
$120.00 ea
135.00 ea
159.00 ea
8.00 pk
5.00 pk
ARF12
End View
No.
No.
Size
VAM Series VAP Series
VAM-1-12
VAP-1-12 12"
VAM-1-18
VAP-1-18 18"
No. TOM
50
32
$69.00 ea
89.00 ea
69.00 ea
89.00 ea
69.00 ea
89.00 ea
69.00 ea
89.00 ea New
ARF20
ALVIN®
Upright
Roll Files
Durable and
compact,
constructed
of corrugated
fiberboard. Includes
slotted hand-hole. 15" wide x 12" deep, height
is 11½" in front and 22" in back. Shipped flat,
easy set up. Shipping weight is 4 lbs.
No.
ARF12
ARF20
Slots
12
20
Tube Size
37⁄8" x 35⁄8"
2¾" x 2¾"
SRP
$72.00 ea
72.00 ea
Drawing Equipment
37
ALVIN® Paral-Liner
Mobile Parallel Straightedge
Rigid phenolic construction with a black satin finish. Mobile straightedge affords
frictionless operation through the floating action of the nylon rollers mounted on
the blade. The rollers retract at a touch, securing the blade for accurate drawing.
Acrylic edges are elevated to prevent ink smears and steel ball-bearing pulleys
provide smooth movement. Comes with all mounting hardware and
installation instructions.
No.
1101-30
1101-36
1101-42
1101-48
1101-60
Length
30"
36"
42"
48"
60"
SRP
$144.00 ea
156.00 ea
168.00 ea
178.00 ea
199.00 ea ALVIN® Paral-Liner Deluxe
Mobile Parallel Straightedge
Deluxe version of the popular Paral-Liner Series, with an integral comfort grip
bar to control straightedge movement. The brushed aluminum surface resists
perspiration stains and corrosion, and provides a convenient pencil ledge as well.
The floating roller movement allows the draftsman to move the straightedge with
minimal effort and then lock it in place.
No.
2201-36
2201-42
2201-48
2201-60
Length
36"
42"
48"
60"
SRP
$170.00 ea
185.00 ea
198.00 ea
220.00 ea Alvin® Guide-Line
Acrylic Parallel Straightedge
An affordable acrylic straightedge that features an elevated ruling edge for
smudge-free inking. Smooth operation is provided by self-lubricating pulleys.
The dual-function tunnel cap serves as a finger grip and cable channel.
No.
1102-30
1102-36
1102-42
1102-48
Length
30"
36"
42"
48"
SRP
$65.00 ea
70.00 ea
79.00 ea
89.00 ea MAYLINE®
Mobile Parallel Ruling Straightedges
Side view
with EZ Grip Cap
Perfect for engineering and construction applications. Every Mayline® parallel
ruling straightedge begins with a durable, black phenolic laminate base where
a transparent blade is inset for see-through registration and fine line quality. For
those who work with a variety of surfaces, straightedge is designed with retractile
ball-bearing rollers of metal or Delrin® built right into its base. They literally float
over any surface whether it’s paper or film. The rollers come in chrome-plated
brass or plastic. Plastic rollers are recommended for use with drafting films.
Above-board mounting hardware included.
No.
Length
With Metal Rollers
7261A
36"
7262A
42"
7263A
48"
7265A
60"
SRP
$229.00 ea
240.00 ea
255.00 ea
330.00 ea
With Metal Rollers, E-Z Grip Cap
7272A
42"
309.00 ea
7273A
48"
352.00 ea
No.
Length
SRP
With Delrin® Plastic Rollers
D7261A
36"
$225.00 ea
D7262A
42"
239.00 ea
D7263A
48"
249.00 ea
D7265A
60"
300.00 ea
With Delrin® Plastic Rollers, E-Z Grip Cap
D7272A
42"
319.00 ea
D7273A
48"
359.00 ea MAYLINE®
Mobile Parallel Ruling Straightedges with Armoredge
These models have the same features as other Mayline® straightedges. The
Armoredge is a nearly invisible protective strip of 8 mil. stainless steel that is
applied to the leading edge of the Mayline® straightedge to resists nicks and
dents from drawing tools.
No.
Length
With Delrin® Plastic Rollers
D7261ASE
36"
D7262ASE
42"
D7263ASE
48"
D7265ASE
60"
SRP
$349.00 ea
359.00 ea
375.00 ea
439.00 ea 38 Drawing Equipment
MAYLINE® STRAIGHTEDGE parts
ALVIN® REPAIR AND replacement parts
Knob
PXP
No. Description SRP
K22R 1/pack
$2.50 ea PHX
Spring
No. DescriptionSRP
V11R 5/pack
$13.00 pk BX-2
BX-LG
KN6
Left Pulley Plate
ALVIN® Straightedge Hardware Kit
Contains two front wire connectors, two rear
pulley assemblies, and eight screws (6x 3/4"
and 2x 5/8"). Wire not included. Must be ordered
separately. For Models 1101, 1102, and 2201.
TF2
BX-SM
No. HD4
PXB and PLB Repair Parts
No.
PXP
Description
Repair kit contains wire,
spring, top adjustment knobs,
and screws
BX21
BX24
BX26
BX31
BX36
BX42
21" straightedge blade
for PXB21 24" straightedge blade
for PXB24 and PLB24
26" straightedge blade
for PXB26 and PLB26
31" straightedge blade
for PXB31 36" straightedge blade
for PXB36 and PLB36
42" straightedge blade
for PXB42 BX-2
Metal side brackets, set of 2
KN6
Top adjustment knobs, set of 6
Right Pulley Plate
No. Description SRP
10652 1/pack
$7.00 ea SRP
$17.00 st
ALVIN®
Replacement
Brake Knobs
34.00 ea
Contains three
thumbscrew brake
knobs, two T-shaped
brake screws, and one
brake screw stud for
Alvin® straightedges
1101, 1102, and 2201
made until 2009.
37.00 ea
No. KN3
25.00 ea
28.00 ea
30.00 ea
Straightedge Stops
No. DescriptionSRP
10653 1 pair
$10.00 pr Pulley Housing
No. Description SRP
10655 1/pack
$11.00 ea
SRP $11.00 st
40.00 ea
Ball Bearing Pulley
10.50 st
No. DescriptionSRP
P14R 1/pack
$9.00 ea 8.00 pk
PHX
Plastic carrying handle
7.00 ea
TF2
Rubber grip track, set of 2
7.00 st
BX-SM
BX-LG
Legs for PXB21, 24 and 26 and PLB24 and 26, set of 2
11.00 st
Legs for PXB31, 36 and 42 and
PLB36, set of 2
11.00 st New
ALVIN® Replacement Brake Knobs
Contains two EP3 straightedge brake knobs, one
wire brake knob, two new style T-shaped brakes,
and one clinch stud. Used for Alvin® 1101 and 2201
series straightedges made after 2009.
ALVIN
Straightedge
Rewiring Kit
®
Includes 30' of
nylon-covered
stainless steel
wire, spring,
two eyelets, and
two front wire
connectors. Fits
Models 1101, 1102, and 2201.
No. PEP-2
SRP $17.50 st
No. DescriptionSRP
10651 1/pack
$12.00 ea No. KN4
SRP $9.00 st
7 x 7 Lubricated
Stainless Steel
Replacement Cable
w/Nylon Coating
No.
Description
7355A For 30" to 42" straightedge, 19'
7355B For 48" to 60" straightedge, 23'
SRP
$35.00 ea
42.00 ea Replacement Hardware Bag (Not shown)
No. 7306
SRP $42.00 st SRP $10.00 st
EP2
EP3
Nylon-Covered Stainless Steel Wire
ALVIN®
Replacement End Caps
EP2 contains two end caps and four screws. EP3
contains two new end caps and two screws. For
Models 1101 and 2201.
No.
EP2
EP3
Description
SRP
For straightedges until 2010
$7.50 st
For straightedges from 2010 NEW 9.00 st
No.
NCSS-A
Size
100-ft. roll
SRP
$25.50 rl Nylon-Coated Copper Cord
No.
CCSC-A
Size
100-ft. roll
SRP
$69.00 rl ALVIN® Wood Pantographs
Create enlarged or reduced drawings up to 10x scale.
Features arms made from seasoned hardwood and
chromed steel hardware and components. Includes
table clamp and four spare leads. Not designed for
1:1 ratio. 1/box.
No.
PA305
PA306
PA308
Description
18", 20 ratios
21", 25 ratios
24", 30 ratios
SRP
$29.00 ea
31.00 ea
38.00 ea Drawing Equipment
39
FAIRGATE® Heavy-Duty Aluminum T-Squares
Hefty 2" wide rigid aluminum blade with deeply cut, highly visible graduations.
Blade securely riveted to durable, high-impact plastic head. Graduation in
8ths and 16ths. Larger sizes available by special order.
T-Series
No.
T24T
T30T
T36T
Size
24"
30"
36"
SRP
$26.60 ea
31.00 ea
34.60 ea
No.
T42T
T48T
Size
42"
48"
SRP
$39.60 ea
48.10 ea
FAIRGATE® Lightweight Aluminum T-Squares
Many of the same features as the T-Series, but in a lighter weight, hardened
aluminum. Blade measures 1½" wide.
No.
L12
L15
L18
L-Series
Size
12"
15"
18"
SRP
$10.75 ea
11.45 ea
12.40 ea
No.
L24
L30
L36
Size
24"
30"
36"
SRP
$14.10 ea
15.95 ea
17.50 ea Lance® Standard Aluminum T-Squares
Available in lengths from 12" to 36" in standard gauge aluminum with a 1½"
shaft. Calibrated in 8ths and 16ths on the blade and in 8ths on the head.
T-square head is made from polycarbonate plastic for the greatest durability.
No.
T012
T015
T018
Lance® T-Series
Size
12"
15"
18"
SRP
$10.50 ea
11.00 ea
12.00 ea
No.
T024
T030
T036
Size
24"
30"
36"
SRP
$14.00 ea
15.00 ea
17.00 ea Lance® Heavy-Duty Aluminum T-Squares
Available in lengths from 24" to 60" in heavy-duty gauge aluminum with a
2" shaft. Calibrated in 8ths and 16ths on the blade and in 8ths on the head.
T-square head is made from polycarbonate plastic for the greatest durability.
Lance® HT-Series
No.
HT024
HT030
HT036
Size
24"
30"
36"
SRP
$25.90 ea
30.95 ea
33.95 ea
No.
HT042
HT048
Size
42"
48"
SRP
$38.00 ea
48.00 ea
Lance® Stainless Steel Professional T-Squares
These stainless steel T-squares have all the features sought by the
draftsman, artist, hobbyist, and others. The blade made from the finest grade
of stainless steel has just the right amount of flexibility to always snap back to
shape. A beveled edge helps prevent ink from running under the blade when
ruling. Precision assembly of the blade to the die-cast zinc head assures
accurate alignment.
Lance®-SSTP Series
No.
SSTP-018
SSTP-024
SSTP-030
Size
18"
24"
30"
SRP
$26.40 ea
28.50 ea
30.80 ea
No.
SSTP-036
SSTP-042
SSTP-048
Size
36"
42"
48"
SRP
$36.10 ea
40.70 ea
46.15 ea ALVIN® Stainless Steel Professional T-Squares
Features a 1½" wide spring-tempered stainless steel blade. Black graduations
include two scales: top edge in inches with 1/32" divisions; lower edge in picas
and points (6 & 12 pt.). Black finished cast aluminum fixed head is secured by
four pre-set flat-head screws.
SST-Series
No.
SST24
SST30
SST36
Size
24"
30"
36"
SRP
$38.00 ea
42.25 ea
51.50 ea ALVIN® Stainless Steel Professional T-Squares
Features a 1½" wide, spring-tempered stainless steel blade. The strong,
durable, cast-aluminum fixed head with ebony black finish is secured by four
pre-set flat-head screws.
S/S-Series
No.
S/S18
S/S24
S/S30
Size
18"
24"
30"
SRP
$31.00 ea
34.50 ea
37.00 ea
No.
S/S36
S/S42
S/S48
Size
36"
42"
48"
SRP
$42.00 ea
48.50 ea
55.65 ea 40 Drawing Equipment
ALVIN® Transparent Edge T-Squares
Selected hardwood blade for strength and straightness. Elevated,
see-through acrylic edges for smudge-free line work. Smooth wood
head attached with five screws for long-lasting squareness.
No.
C18
C21
C24
Size
18"
21"
24"
SRP
$13.95 ea
14.95 ea
15.95 ea
No.
C30
C36
C42
Size
30"
36"
42"
End View
Elevated Edge Construction
SRP
$17.95 ea
21.95 ea
24.95 ea
C-Series
ALVIN® Clear Acrylic T-Squares
A full view is provided through 100% acrylic blade. Relieved edge
prevents ink from under-flowing onto drawing.
No.
P18
P24
Size
18"
24"
SRP
$15.95 ea
16.95 ea
No.
P30
P36
Size
30"
36"
SRP
$18.95 ea
20.95 ea
ALVIN® Professional Metal/Plastic T-Squares
P-Series
Raised blade edges for inking, plus a reinforced design minimize the
chance of blade snapping under rough handling or abuse. The 100% acrylic
blade is fixed securely to the ebony black head and reinforced with black
matte metal center strips, permanently bonded to the full length of both
surfaces.
No.
MP24
MP30
Size
24"
30"
SRP
$30.75 ea 33.25 ea
No.
MP36
Size
36"
SRP
$38.25 ea
MP-Series
ALVIN® Wood Academic T-Squares
Economically designed for academic use. Seasoned hardwood construction
with practical, attractive natural finish and smoothly finished edges for
precise drawing. Fixed head secured with epoxy plus metal fasteners.
No.
W18
W21
Size
18"
21"
SRP
$5.75 ea
6.75 ea
No.
W24
W30
Size
24"
30"
SRP
$7.25 ea
8.50 ea
W-Series
ALVIN® Plastic Academic T-Squares
Clear plastic T-square with inch and metric calibrations. Made of crystalclear Dunilon. 12" has two bevels, 18" and 24" have double inking edge.
Easy to see through to underline notes, draw columns, or check layouts.
No.
Size
330MI
12"
D346PMI 18"
SRP
$9.45 ea
16.75 ea No.
Size
D365PMI 24"
SRP
$18.50 ea
330MI
ALUMICOLOR™ Calibrated Wood/Acrylic T-Squares
The classic look of the traditional wood/acrylic T-square now with calibrated
edges for easy and precise measurements. Blade is securely fastened to
the large wood head, providing permanent accuracy.
No.
82924
82936
Size
24"
36"
82924
SRP
$19.95 ea
25.95 ea
ALVIN®
Tru-Angle™
Adjustable
Triangles
Provides the
features of a 45°/90°
adjustable triangle
plus those of a
protractor. Angles
from 0° to 90° can
be drawn from the baseline with 1/2° accuracy.
Die-engraved graduations for high visibility. The
aluminum thumbscrew securely holds the selected
angle and allows quick pickup and manipulation.
Made of high impact, 0.100" thick, optically clear
acrylic to eliminate parallax and allow close pencil
tolerance. Available with or without inking edge.
No.
Size SRP
With Inking Edge
106CB 6"
$28.50 ea
108CB 8"
31.00 ea
110CB 10"
33.75 ea
120CB 12"
45.00 ea
No.
Size SRP
Without Inking Edge
106C 6"
$24.00 ea
108C 8"
27.80 ea
110C 10"
31.00 ea
120C 12"
37.95 ea ALVIN®
Clear-Angle
Adjustable
Triangles
Made of heavy
duty 1/8"
thick acrylic
plastic, with
beveled edges,
die-engraved
graduations,
and a white protractor arc. Double row
of graduations on protractor arc shows
complementary angle at any setting. Angles from
0° to 90°. Built-in magnifier allows exact settings.
Available in four sizes.
No. Size SRP
1606 6"
$43.45 ea
1608 8"
47.55 ea
No.
Size SRP
1610 10"
$55.85 ea
1612 12"
66.15 ea ALVIN®
Computing
Trig-Scale
Adjustable
Triangles
Rise and slope graduations. Inking edges
on all three sides. Hot-stamped graduations.
Thumbscrew locks triangle securely at desired
angle. 0.12" thick, light blue, optically clear acrylic.
Detailed instructions included.
No.
LX708K
LX710K
LX712K
Size
8"
10"
12"
SRP
$20.95 ea
24.95 ea
26.95 ea 41
Drawing Equipment
30°/60°
30°/60°
30°/60°
45°/90°
Double
inking edge
Double
inking edge
45°/90°
Double
inking edge
45°/90°
ALVIN® Professional Topaz Triangles
Distinctive 0.100" transparent topaz-colored
acrylic and double inking edges for smudge-free
ruling. Double taper cutout center for easy lifting.
Tempered acrylic resists scratching.
No.
Size SRP
No.
45°/90° 30°/60°
T145-4 4"
$5.10 ea T160-6
T145-6 6"
5.75 ea T160-8
T145-8 8"
8.75 ea T160-10
T145-10 10" 11.75 ea T160-12
T145-12 12" 14.75 ea T160-14
Size SRP
6" $5.75 ea
8"
6.50 ea
10" 9.25 ea
12" 11.50 ea
14" 16.50 ea ALVIN® Smoke-Tint Triangles
ALVIN® Fluorescent Triangles
These triangles are made of molded 0.10" thick
polystyrene and feature a transparent non-glare
smoke tint for easy visibility. Edges are doublebeveled with handy fingerlifts for quick placement
and removal. Supplied in poly bag with
hanging hole.
Made of molded polystyrene 0.10" thick with
double-beveled inking edges and double-beveled
center cutout finger lifts. The fluorescent orange
color reflects light along the drawing edge.
Supplied in poly bag with hanging hole.
No.
Size SRP
45°/90° SK450-4 4" $2.60 ea
SK450-6 6"
3.60 ea
SK450-8 8"
4.10 ea
SK450-10 10" 4.85 ea
SK450-12 12"
7.25 ea
No.
Size SRP
30°/60°
SK360-4 4" $2.40 ea
SK360-6 6"
2.90 ea
SK360-8 8"
3.60 ea
SK360-1010" 3.85 ea
SK360-1212" 4.85 ea
SK360-1414" 6.75 ea No.
Size SRP
45°/90°
FT450-4 4" $2.25 ea
FT450-6 6"
3.10 ea
FT450-8 8"
3.95 ea
FT450-10 10" 5.35 ea
FT450-12 12"
7.75 ea
No.
Size SRP
30°/60°
FT390-4 4" $2.20 ea
FT390-6 6"
2.55 ea
FT390-8 8"
3.10 ea
FT390-10 10" 3.95 ea
FT390-12 12" 5.35 ea
FT390-14 14" 7.75 ea 30°/60°
45°/90°
30°/60°
45°/90°
ALVIN® Professional Acrylic Triangles
Will not discolor or warp with age and handling.
The machined finish and hand-polished edges
of the C Series (clear) and F Series (fluorescent)
meet or exceed government specifications. The
F Series is extremely popular because the
refracted light has an illuminating effect on the
drawing by accentuating the triangle’s edge. All
models feature a double-taper cutout center for
quick, easy lifting from any angle.
No.
Size SRP
Clear Acrylic
45°/90° 131C-4 4"
$3.95 ea
131C-6 6"
4.75 ea
131C-8 8"
6.75 ea
131C-10 10"
9.15 ea
131C-12 12" 12.95 ea
131C-14 14" 17.20 ea
131C-16 16" 26.95 ea
131C-18 18" 33.00 ea
131C-24 24" 48.00 ea
No.
Size SRP
30°/60°
130C-4
130C-6
130C-8
130C-10
130C-12
130C-14
130C-16
130C-18
130C-24
4"
6"
8"
10"
12"
14"
16"
18"
24"
Fluorescent
45°/90° 131F-4 4"
$4.25 ea
131F-6 6"
5.50 ea
131F-8 8"
8.35 ea
131F-10 10" 11.50 ea
131F-12 12" 16.25 ea
131F-14 14" 21.90 ea
30°/60°
130F-4
130F-6
130F-8
130F-10
130F-12
130F-14
4" $3.95 ea
6"
4.70 ea
8"
6.20 ea
10"
7.95 ea
12" 9.95 ea
14" 15.00 ea Suitable for custom imprint.
$3.40 ea
3.95 ea
5.10 ea
6.10 ea
8.00 ea
11.50 ea
14.50 ea
16.70 ea
34.40 ea
ALVIN® Academic
Transparent Triangles
ALVIN® Triangle Set
Economical drafting tool features professionalquality, molded 0.08" polystyrene, and built-in
finger lifts to make handling easier. Supplied in
poly bag with hanging hole.
No.
Size
45°/90° S1450-4 4"
S1450-6 6"
S1450-8 8"
S1450-10 10"
S1450-12 12"
SRP
$1.70 ea
2.10 ea
2.80 ea
3.75 ea
4.85 ea
A set of clear acrylic triangles (8" 45/90° and
10" 30/60°) with 16ths of an inch graduations on
two edges. Raised inking edge prevents smudging.
Center cutout finger lifts.
No. LX810G
SRP $12.00 ea No.
SizeSRP
30°/60° S1390-4 4" $1.70 ea
S1390-6 6"
1.90 ea
S1390-8 8" 2.40 ea
S1390-1010" 2.80 ea
S1390-1212" 3.95 ea ALVIN® C-Series Triangles Display
Size: 14"W x 16"H x 6"D
Contents: 72 Assorted C-series Triangles
No. 1143DCH
SRP $492.15
ALVIN® FT-Series Triangles Display
Size: 16"W x 18"H x 7"D
Contents: 102 Assorted FT-series Triangles
No. 1145FTD
SRP $416.10
ALVIN® S-Series Triangles Display
ALVIN® SK-Series Triangles Display
Size: 14"W x 16"H x 6"D
Contents: 144 Assorted S-series Triangles
Size: 16"W x 18"H x 7"D
Contents: 88 Assorted SK-series Triangles
No. 1141D
No. 1146SKD
SRP $397.80
SRP $368.10
42 Drawing Equipment
30°/60°
45°/90°
Lightweight, durable aluminum with matte-satin
finish that resists stains and tarnishing. Features
1/16" graduations on the 90° angle. May also be
used as a template for circles from 1/16" to 13⁄8".
No.
30°/60°
Size SRP
AT230-8
AT230-10
AT230-12
AT230-14
8"
$7.95 ea
10" 11.40 ea
12" 12.10 ea
14" 17.10 ea Made of heavy-duty 0.09"
thick clear plastic with a
beveled outer edge for accurate drawing. Features
a center cutout finger lift and accurate die-stamped
graduations in 1/2° increments.
Flexible, stainless
steel protractor
has micro-fine
guide holes at
every 45°, 30°, 22.5°, 5°, 1°, and 0.5° interval to
plot any angle with ease and absolute accuracy.
Metal T-bar and see-through crosshairs provide
exact alignment. Remove the T-bar to work on flat
surfaces or use the 6" centering scale. Graduated
in 1/2° increments.
Size
6"
8"
12"
SRP
$2.50 ea
4.95 ea
16.95 ea New
No. G30
ALVIN®
360° Protractor
This aluminum
protractor offers
a full 360°
graduated in
1° increments.
No. A360
SRP $7.95 ea
For setting bevels,
measuring, and
transferring angles.
Graduations from 0° to
180° in opposite directions.
33⁄8" x 2" head. 6" adjustable
arm locks in position with
knurled thumb nut.
ALVIN Circular
Protractors
®
Similar to Fairgate shown above.
No.
Size
30°/60°
TR3060-8 8"
TR3060-10 10"
TR3060-1212"
TR3060-1414"
SRP
$6.95 ea
9.95 ea
10.50 ea
14.95 ea Made of heavy-duty
0.09" thick clear plastic.
Features a full 360° of
die-stamped graduations
in 1/2° increments and
beveled edges. Center
cutout for easy lifting.
No.
P260
P263
Size
6"
8"
No. G18
Made of indestructible nickel steel with a
machined edge for graphic arts applications.
The internal bar design, with knurled knob,
provides convenient handling.
No.
Size SRP
45°/90° NS345-6 6" $41.50 ea
NS345-10 10" 51.75 ea
NS345-15 15" 82.00 ea
No.
Size SRP
30°/60°
NS360-6 6" $35.00 ea
NS360-10 10" 45.50 ea
NS360-15 15" 66.00 ea C-THRU®
Mini Protractor
Constructed of clear
vinyl with cutout
center. Graduations
are clearly divided
into one degree increments. 3½" size. 12/box.
No. 3751
FAIRGATE® Aluminum Curve Rule
ALVIN® Circular
Protractors
ALVIN® Hardened-Steel Triangles
Made of 1/16" thick hardened aluminum for use
with both drafting instruments and cutting tools.
Graduated in 8ths along the leading edge up to
24". 23" overall length.
Made of durable
0.08" thick
polystyrene.
Features a full
360° of long-lasting
graduations and
beveled edges.
Center cutout for
easy lifting.
No.
P234
P236
P238
Size
4"
6"
8"
No. CV202
SRP
$1.95 ea
2.95 ea
12.50 ea
Made of clear
0.09" thick plastic
featuring a center cutout finger lift and beveled
edges. Black, die-stamped graduations are divided
into 1/2° increments.
Description
12" curve
24" curve
SRP
$12.95 ea
17.25 ea
1/8" calibrations are on one edge, on two sides.
Patternmakers, designers, tailors, and anyone
involved in creating garments reaches for this
tool to draw the numerous contours of the human
form. 24" size.
ALVIN
Semi-Circular
6" Protractor
Protractor has
beveled edges and
center cutout finger
lift. Assorted colors.
Sold by the dozen.
Solid center design semicircular protractor
with graduations that are sandwiched between
two laminated sheets of clear plastic so they
cannot rub off. Graduations are divided into
1/2° increments.
SRP $9.50 dz
No.
FC012
FC024
LANCE® Hip Curve
C-THRU®
Transparent
6" Semicircular
Protractor
No. FL07/DZ
LANCE® Aluminum French Curves
SRP $2.55 ea
SRP $9.60 dz
®
SRP $17.85 ea
Calibrated in inches, easily read measurements
are on one edge on each side of the curve.
ALVIN® 6"
Semicircular
Protractors
No. P466
SRP $22.50 ea
SRP
$4.95 ea
7.95 ea
30°/60°
45°/90°
SRP $51.00 ea
GENERAL®
Round Head
Steel Protractor
with Arm
®
LANCE® Aluminum Triangles
No.
Size SRP
45°/90° TR4590-6 6" $6.95 ea
TR4590-8 8"
8.95 ea
TR4590-10 10" 10.50 ea
TR4590-1212" 16.50 ea
GENERAL®
Precision
Protractor
No.
P476
P477
P478
FAIRGATE® Aluminum Triangles
No.
Size SRP
45°/90° AT245-6 6" $7.95 ea
AT245-8 8" 10.25 ea
AT245-10 10" 12.10 ea
AT245-12 12" 18.95 ea
AT245-14 14" 29.70 ea
ALVIN®
Semicircular
Protractors
No. 376
SRP $1.50 ea
No. HC024
SRP $17.50 ea
See True Angle products on page 224 in
the Fine Arts Section.
43
Drawing Equipment
C-Thru®
Ship Curve
Set
Features a set of
six ship curves
made of clear
0.06" thick plastic
with finished
edges. Sizes
range from
6½" to 24".
Packaged in a
poly bag with
hang hole.
FC3361
l▲
FC3371
ALVIN® 4-Piece
French Curve
Sets Display
Size: 9"W x 16"H x 7"D
Contents: 18 Pieces No. FC44
▲
FC3381
l▲
No. SC66
SRP $22.95 st
No. FC44D
SRP $200.70
ALVIN® 3-Piece
French Curve Sets Display
Size: 9"W x 16"H x 7"D
Contents: 18 Pieces No. FC33
LANCE
French Curve
®
FC3391
No. FC33D
▲
The classic french curve
No. 17 is beautifully captured
in this Lance® curve. The rigid
plastic is slightly tinted for easy
visibility on white surfaces and
strategically placed positioning
holes help make it easier to use.
Approximately 9" long.
SRP $143.10
FC3401
▲
No. FC-1
SRP $5.95 ea
FC3411
▲
ALVIN® 3-Piece French Curve Set
8
6
14
13
FC3421
15
l▲
Curves molded of green-tinted 0.09" thick
polystyrene. Convenient, reusable storage
envelope. Sizes 5½", 6½", and 12½".
No. FC33
SRP $7.95 st
FC3431
17
l▲
18
18B
Double
inking edge
17B
16
ALVIN® French Curves
Popular curves molded of smoke gray-tinted
0.08" thick polystyrene with double inking
edges. Packaged in protective vinyl case.
21
20
23
24
25
ALVIN Transparent Irregular Curves
®
Professional quality, hand-finished curves of 0.06"
thick acrylic. Sizes given are nominal.
No.
1010-6
1010-8
1010-13
1010-14
1010-15
1010-16
1010-17
1010-17B
1010-18
1010-18B
1010-20
1010-21
1010-23
1010-24
1010-25
Pattern
6
8
13
14
15
16
17
17B
18
18B
20
21
23
24
25
Size
5"
6"
8"
7"
9"
8"
9½"
8"
9"
8½"
11"
12½"
12"
14"
17½"
SRP
$3.60 ea
4.55 ea
5.05 ea
5.60 ea
6.15 ea
6.19 ea
5.45 ea
5.45 ea
6.50 ea
6.50 ea
6.30 ea
5.20 ea
8.35 ea
8.35 ea
13.45 ea
No.
FC3361l▲
FC3371▲
FC3381l▲
FC3391▲
FC3401▲
FC3411▲
FC3421l▲
FC3431l▲
FC44
FC88
Size
5¼"
6½"
6½"
8"
8½"
10¼"
12½"
10¼"
lSet of 4
▲Set of 8
Std. Pkg.
12
12
12
12
12
12
12
12
SRP
$2.95 ea
3.50 ea
3.50 ea
4.45 ea
4.45 ea
4.85 ea
4.95 ea
5.50 ea
1
1
11.15 st
18.65 st
KUM® 3-Piece
French Curve Set
Contains three popular curves,
Double
packaged in a vinyl envelope.
inking edge
Made of topaz-colored acrylic,
each offers a double-beveled inking edge to
prevent smudges and a tempered, scratch-resistant
surface. Curves may be ordered separately.
No. FTC3
SRP $14.95 st
ALVIN® 3-Piece French Curve Sets
Sets contain three of the most popular curves
molded in polystyrene in pink or mint green.
Features a double inking edge. Supplied in a
reusable storage wallet.
No.
LX3PK
LX3LG
Description
Pink
Green
SRP
$7.95 st
7.95 st
44 Drawing Equipment
ALVIN®
4-Piece
Geometry
Set
Features an
easy-grip design.
Made of clear,
durable plastic, with
solid stripe accent.
Includes 12" ruler,
5" 45°/90° triangle,
7" 30°/60° triangle, and a 6" protractor all
graduated in inch and metric. Packaged in
reusable vinyl storage pouch. Available in assorted
blue, green, red, and yellow stripes.
No. FL41
ALVIN®
8-Piece
Geometry Set
with Compass
ALVIN® Professional Parallel Glider
Includes 6" ruler,
4" protractor, 3"
45°/90° triangle,
4" 30°/60° triangle,
compass, pencil,
pencil sharpener,
and eraser, in a
convenient, reusable
hinged storage case.
No. FL04
SRP $3.95 st
SRP $2.95 st
1043-24
1043-24Y
New
ALVIN®
10-Piece
Mathematical
Instrument Set
ALVIN® Truflex
Flexible Curves
Set includes
metal pencil compass,
alphabet stencil, 45° triangle,
30°/60° triangle, vinyl eraser, metal divider, pencil,
6"/15cm ruler, 180° protractor, and sharpener.
Packaged in attractive metal case.
No. MS10
SRP $6.25 st
55-Piece Railroad Curve Set
Machine finished from first quality 0.060" clear
acrylic. From 0°15" to 20,000" radius, maximum
curve length is 18" and width is 1½". Imprinted
with the arc in degrees and minutes, the scale and
the radius in hundredths of an inch. Radial line
imprinted to indicate the exact point of tangency.
Scale is 1" = 100'. Guaranteed to be within ±.010"
of the true arc. Packaged in a polished hardwood
case with label identification.
No. 2003
SRP $879.00 st
55-Piece Common Radius Acrylic
Curve with Tangent Set
End View
Easily-shaped lead core construction firmly holds
any curve for accurate drawings. Graduated in
both inch and metric. Inch graduations in 16ths
and 32nds, metric graduations in mm and cm.
Convenient inking edges for pen and marker use.
Also includes flat edges on both sides for pencil
drawing. Used for quilting and pattern making.
No.
1043-12
1043-16
1043-24
1043-32
1043-40
Description
12", White
16", White
24", White
32", White
40", White
SRP
$6.95 ea
8.95 ea
14.95 ea
17.95 ea
19.50 ea
1043-16Y
1043-24Y
16", Yellow NEW
24", Yellow NEW
8.95 ea
14.95 ea
ALVIN® Rolling Parallel Ruler
A multi-purpose drawing tool made from highimpact plastic for students, artists, and designers.
Graduated in both inch and metric. Includes
many useful formulas and conversion factors.
Draw horizontal and vertical parallel lines with
ease. Draw circles, curves, or arcs. Use the
built-in protractor to draw angles. Blister-carded,
instructions on back.
No.
306
312
Size
6"
12"
SRP $879.00 st
27-Piece Highway Curve Set
Hand-finished curves machined from first
quality 0.06" clear acrylic, cut to the formula:
R = 57.30/angle. Maximum curve length is 18"
and width is 1½". Imprinted with the arc in
degrees and minutes, the scale and the radius
in hundredths of an inch. Scale is 1" = 100'.
Packaged in an attractive polished hardwood
case with label identification.
No. 2009
SRP $604.00 st
No.
295
295M (Metric)
296
296M (Metric)
Size
10"
10"
14"
14"
SRP
$22.95 ea
22.95 ea
26.95 ea
26.95 ea
Acu-Arc® Rulers and Curves
Still manufactured by hand, these rulers and
curves have been used by architects, engineers,
chiropractors, designers, draftsmen, artists,
woodworkers, metal workers, surveyors, carpet
installers, and law enforcement for 45 years.
ACU-ARC®
Adjustable Curves
Made of incredibly
flexible, shape-holding
butyrate plastic that
can be finger-shaped to any curve for extremely
accurate drawings. One edge is flat to surface
for pencil, and the other side has a bead for
ruling pen.
No.
1033-18
1033-24
1033-36
1033-48
Size
18"
24"
36"
48"
SRP
$23.50 ea
31.00 ea
48.00 ea
68.00 ea
SRP
$6.95 ea
9.95 ea
The same quality features as No. 2003, but with
radius marked in inches. Curves from 3" to 200"
radius. Can be used in railroad and highway curve
applications. Packaged in a polished hardwood
case with label identification.
No. 2004
An easy-to-use instrument that combines the
functions of a parallel straightedge, triangle,
protractor, T-square, and compass in one. One of
the most useful and convenient aids for drafting,
drawing, and nautical applications. Smooth
gliding action to easily make parallel lines without
twisting or turning under accidental pressure.
Features durable acrylic blade with printed
graduations, through-holes at 1/2" increments
for drawing circles, and a comfortable aluminum
roller bar with non-skid rubber O-rings for a firm
grip on any surface. Available in both 10" and 14"
lengths in metric and inch versions. Individually
blister-carded with detailed instructions included.
ACU-ARC® Adjustable Ruler
C-Thru® Folding Parallel Ruler
Provides a fast, accurate method of drawing
lines parallel to any reference line. Undercut and
beveled blades are of durable clear plastic that will
not warp or shrink. Corrosion-resistant anodized
aluminum links allow smooth operation with up to
3" spacing. Cork pads prevent slippage.
No.
1500-12
1500-15
1500-18
Size
12"
15"
18"
SRP
$9.50 ea
10.75 ea
11.75 ea
A ruler that eliminates the need for a beam
compass or expensive curve sets. It can be
adjusted to any radius, from 63⁄8" to 200"
(17cm to 500cm), to determine the radius of an
existing curve for dimension drawings, to find
center lines and center points, or determine what
a curve must be to fair in existing points, or lines,
on a drawing.
No.
A464
A464M
Description
Marked in inches
Marked in cm
SRP
$56.00 ea
56.00 ea