Seiko Instruments GmbH

Transcription

Seiko Instruments GmbH
Seiko Instruments GmbH
?
l
a
s
’
m
t
r
a
e
h
h
W
T
Direct thermal printers
provide fast, reliable, high
resolution printing for a
variety of applications.
Direct thermal printers produce images by simply applying a heating element to specially
treated thermal paper. Unlike thermal transfer, dot matrix, and other technologies, no
ribbons or toner are required reducing operating costs. And with very few moving parts,
direct thermal provides exceptionally high reliability.
Payment Terminals
EFT-POS (Electronic Funds Transfer at Point of Sale)
SII’s ultra-compact and low voltage printing solutions are key factors for success for
small up-to-date
designs.
to date payment terminal
term
LTPZ245 / LTPJ245 / LTPA245
2inch
Low Voltage
Small-footprint
LTPZ245
LTPJ245
LTPA245
L
Cash Registers
SII’s 24 V printer product range provides high performance and high speed
printing solutions for ECR and POS applications as well as for applications where
a quick print-out is needed. Peripherals such as interface boards, automatic
cutters, chip sets, and winder units help design engineers integrate the printers
in their designs easily.
LTP9000 series / CAPG247 / LTPF series
High speed printing
2 to 3inch
Small-footprint
LTP9000
LTPF Series
CAPG247
Why
W
hy Direct
Direct Thermal
Thermal Printing?
Prin
ntin
ng?
Medical, test, and measurement equipment
SII’s mechanisms, subassemblies and portable printers are used by world class
medical equipment manufacturers.
LTPV series / DPU-414 / DPU-S445
3 to 4inch
Quiet
Chart Printing
LTPV
DPU-414
DPU-S445
Outdoor Kiosks and ATMs
Durable SII mechanisms and subassemblies provide worry-free printing for unattended
outdoor applications.
APU-G247 / KPU series / CAP9000 series
2 to 4inch
Presenter
Auto cutter
APU-G247
KPU
CAP9000 series
CONTENTS
········
·········
···············
··················
·····················
·················
··················
·················
·············
·····················
Thermal Printer
Product Classification Table
Low Voltage
Classification
Low Voltage
Low
Voltage
24Volt
24Volt
Serial
Printer
24 Volt
Mobile Printer
Standalone
Panel-Mount
Printer Unit
Product Category
Serial Printer
Panel-Mount
Standalone
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
3
Mobile Printer
Standalone Printer Unit
Panel-Mount Printer Unit
Sub-assembled Printer Unit
Product
Paper Width(mm)
Resolution(dots / mm)
LTPJ245
58
8
LTPA245
58
8
LTPZ245
58
8
CAPC245
58
8
LTPC235
58
6
LTPC245
58
8
LTPH245
58
8
LTPV345
80
8
LTPV445
112
8
LTP1245
58
8
LTP8235
58
6
CAPG247
58
8
LTPG247
58
8
LTPF247
58
8
LTPF347
80
8
CAP9247
58 / 60
8
CAP9347
80 / 82.55
8
CAP9447
112
8
LTP2242
60
8
LTP2342
80
8
LTP2442
112
8
LTP9247
58 / 60
8
LTP9347
80 / 82.55
8
LTP9447
112
8
Product Category
Easy Paper Operation Mechanism
Loading Mechanism
Easy Paper Operation Mechanism
Loading Mechanism
Product
Paper Width(mm)
Resolution(dots / mm)
Dot Composition(H x W)
MTP102-16B
38
-
7 x 110
MTP201-20B
58
-
7 x 138
MTP201-24B
58
-
7 x 166
MTP401-40B
80
-
7 x 278
MTP201-G128
58
-
8 x 128
MTP201-G166
58
-
8 x 166
MTP401-G280
80
-
8 x 280
STP211
58
-
8 x 144 (A) 8 x 192 (B)
STP312
80
-
8 x 256
STP411
112
-
9 x 320
DPU-3445
112
8
-
DPU-S445
112
8
-
MPU-L465
70 to 115
(300dpi)
-
DPU-414
112
-
9 x 320
DPU-H245
58
8
-
DPU-V445
112
8
-
DPU-30
58
8
DPU-12
58
8
-
APU-F247
58
8
-
APU-G247
58
8
-
APU-9347
80
8
-
KPU-S347
*1
8
-
KPU-S447
112
8
-
SAM-1245
58
8
-
*1
58mm, 60mm, 66mm, 76.2mm, 80mm, 82.55mm
Thermal Printer
Classification
Product
Auto cutter
Interface
CPU
Winder Unit
Low Voltage
LTPJ245
-
-
-
-
LTPA245
-
-
-
-
LTPZ245
-
-
-
-
CAPC245
Included
LTPC235
LTPC245
-
-
PT800P01
WU283
LTPH245
ACUH205A
IFH002-01B/01BK
PTH01P02
-
LTPV345
LTPV445
-
IFV101-01B/01BK
PTV10P01
-
LTP1245
ACU6205
IF1101-01B/01BK
PT110P01
PT120P02
-
-
PT800P01
-
IFG001-01SK/01UK
PTG00P01
IFF001-01B/01BK
PTF00P01
IFF201-01TK
PTF20P01
-
IF9001-01S/01P/01U
PTL32A00
PT900P01
-
IF2303-01B/01BK
PT230P01
-
LTPF247F
ACUF224
LTPF347F
ACUF324
LTPF247E
ACUF224
LTPF347E
ACUF324
Low
Voltage
24Volt
WU282
WU282
-
CAP9347
Mobile Printer
CAP9247
Included
CAP9447
LTP9247
LTP9347
-
Serial Printer
ACU2224
LTP2342
ACU2324
LTP2442
ACU2424
MTP102
MTP201
PTM01P01
IFM001-01B/01B-C
-
Product Category
Product
Power supply
Battery pack
-
PTM01F01
MTP401
Battery charger
Paper roll holder
Mobile Printer
PW-0904-W1
DPU-3445
-
Power cable
CB-JP01
CB-US01
CB-CE01
BP-3007
Standalone
Panel-Mount
Printer Unit
LTP9447
LTP2242
RH-48-00
CB-A01-J1
CB-A01-U1
CB-A01-E1
BC-3008
DPU-V445
PW-0903V-W2
BP-L0717-B1
NC-LSC05
-
CB-CE02-18A
DPU-S445
PW-0904-W2
BP-L0720-A1
PWC-L07A1-W1
-
tbd
MPU-L465
PW-0904-W1
BP-L0720
PWC-L07A1
-
CB-JP01
CB-US01
CB-CE01
DPU-414
PW-4007-JU1
PW-4007-E1
BP-4005
-
-
CB-US01
CB-JP01
DPU-H245
PW-0903H-W2
BP-H007
-
-
CB-JP02
CB-US02
CB-CE02
Panel-Mount
DPU-30
-
-
-
-
-
Printer Unit
DPU-12
-
-
-
-
-
Standalone
Printer Unit
Sub-assembled
Printer Unit
APU-F247
PW-K024-W1
-
-
-
CB-A01-J1
CB-A03-U1
CB-A01-E1
APU-G247
-
-
-
-
DC-04100A
APU-9347-B02
-
-
-
-
DC-04100A
-
-
CB-A01-J2
CB-A01-U2
CB-A01-E2
-
-
-
KPU-S347
KPU-S447
SAM-1245
PW-K024-W1
-
-
24Volt
Serial
Printer
-
Panel-Mount
Standalone
Printer Unit
LTPG247
Sub-assembled
Printer Unit
Included
Other Models
Line up
LTP8235
CAPG247
-
Safety Precautions
24 Volt
Low Voltage
Peripherals Guide
4
Thermal Printer
Low
Voltage
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
LTPJ245
CARD
EFT/POS
Portable
Printer
Low24Volt
Voltage
Compact / Light weight
Front open mechanism
with release function
Easy paper operation
LTPJ245 (Platen is released)
LTPJ245
Model
24Volt
Serial
Printer
Mobile
Mobile Printer
Printer
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g )
*1 Use recommended papers *2 Excluding protrusion
New Latch mechanism
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Sub-assembled
Sub-assembled
Printer
Printer Unit
Unit
Other
Other Models
Models
Line
Line up
up
Safety
Safety Precautions
Precautions
5
LTPJ245
Thermal line dot printing
384
8
58 +0
-1
48
75
Straight
By thermistor
By photo interrupter
3.0 to 3.6 / 4.75 to 5.25
5.5 to 9.5
3.6 (9.5V / 64dots on)
0.6
100 million
50 *1
-10 to 50
68.5 x 31.5 x 22.0 *2
Approx.39
Method
Number of dots / line
Resolution(dots/mm)
Printing
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Detection
Out of paper detection
Operation voltage(Vdd)
Power supply(V)
Operation voltage(Vp)
Head
Peak current(A)
Motor
Pulse activation(pulse)
Service life
Abrasion resistance(km)
The highly innovative latch mechanism provides most natural
and easiest operation when paper reloading.
One Actio
n
Lever
OPEN
*Layout Image
Thermal Printer
Low
Voltage
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
LTPA245
CARD
Detection
Power supply(V)
Peak current(A)
Service Life
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
LTPA245
Thermal line dot printing
384
8
58 +0
-1
48
90
Curved
By thermistor
By photo interrupter
2.7 to 3.6 / 4.75 to 5.25
4.5 to 8.5
2.6 (8.5V / 64 dots)
0.6
100 million
50 *1
0 to 50
69.2 x 28.3 x 31.7 *2
Approx.42
*1 Use recommended thermal papers *2 Excluding protrusion
Thermal Printer Mechanism
Panel-Mount
Standalone
Printer Unit
LTPZ245
CARD
POS/ECR
EFT/POS
Portable
Printer
Contribute to downsized terminal
in customer's side
Easy paper operation
Ultra small and light-weight
Operating temperature: -20˚C to 50˚C
LTPZ245
L
Z245
Model
Printing
Detection
Power supply(V)
Peak current(A)
Service life
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
Operating temperature(ºC)
Dimensions(W x D x H mm)
Mass(g)
24Volt
Serial
Printer
Printing
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Out of Paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
LTPZ245
Thermal line dot printing
384
8
58 +0
-1
48
75
Curved
By thermistor
By photo interrupter
3.0 to 3.6 / 4.75 to 5.25
4.2 to 9.5
3.60 (9.5V / 64dots on)
0.6
100 million
50 *1
-20 to 50
70.1 x 21.8 x 31.0 *2
Approx.47
*1 Use recommended thermal papers *2 Excluding protrusion
Sub-assembled
Printer Unit
Model
Mobile Printer
LTPA245
P
Standalone
Panel-Mount
Printer Unit
Max printing speed: 90mm/sec
Easy paper operation
Platen latch function
Ultra small and light-weight
Low
Voltage
24Volt
Portable
Printer
Other Models
Line up
Measuring
Instrument
Safety Precautions
EFT/POS
6
Thermal Printer
Low
Voltage
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
CAPC Series
LTPC Series
Low24Volt
Voltage
POS/ECR
Measuring
Instrument
Portable
Printer
Max Printing Speed: 65mm/sec
Easy paper operation
Lineup of head resolution: 6dots/mm and 8dots/mm
CAPC245
Model
24Volt
Serial
Printer
Printing
Mobile
Mobile Printer
Printer
Detection
Power supply(V)
Peak current(A)
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Auto Cutter
Service life
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Sub-assembled
Sub-assembled
Printer
Printer Unit
Unit
Other
Other Models
Models
Line
Line up
up
Safety
Safety Precautions
Precautions
7
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Platen position detection
Out of paper detection
Cutter home position
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Cutter
Method
Paper thickness(μm)
Cutting type
Operating time(sec/cycle)max
Cutting pitch(mm)min
Cut frequency(cut/min)max
Pulse activation(pulse)
Abrasion resistance(km)
Life(cut)
Operating temperature(ºC)
Dimensions(W x D x H mm)
Mass(g)
384
8
65
CAPC245
LTPC245 (Platen is released)
LTPC235
Thermal line dot printing
288
6
58 +0
-1
48
60
Curved
By thermistor
By mechanical switch
By photo interrupter
LTPC245
384
8
65
-
By mechanical switch
4.75 to 5.25
5.0 to 8.0
4.6 (8V / 144dots)
4.3 (8V / 96dots)
4.3 (8V / 96dots)
0.82(8V)
2.2
Slide type
54 to 80 *1
Partial cut(Right side single edge point remained)
1
10
30
100 million
50 million
100 million
50
500,000
0 to 50
71.1 x 88.6 x 29.0 *2
Approx. 220
69.2 x 40.0 x 16.2 *2
Approx. 75
*1 Use recommended thermal papers *2 Excluding protrusion
CPU
Model
Thermal printer
Package form
Operating Voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix(H x W dots)
Dimensions(W x D x H mm)
PT800P01
CAPC245 / LTPC245
80pin QFP
Vp:5.0 to 8.0, Vcc:4.5 to 5.5
5 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set, Other characters are available with CGs *1 or external ROM
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
17.2 x 17.2 x 1.7
LTPC235
*1 CG ROM: Japanese, Korean
Thermal Printer
Low
Voltage
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
LTPH245
CARD
POS/ECR
EFT/POS
Measuring
Instrument
Portable
Printer
Low
Voltage
24Volt
Max printing speed: 62.5mm/sec
Easy paper operation
Platen latch function
Operating temperature: -30˚C to 70˚C
LTPH245 (Platen is released)
Service life
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
24Volt
Serial
Printer
Mobile Printer
*1 Use recommended thermal papers *2 Excluding protrusion
Interface
IFH002-01B
Model
CPU
Operating Voltage(V)
Character matrix(H x W dots)
Parallel, Serial(C-MOS)
70.0 x 70.0 x 11.3
Dimensions(W x D x H mm)
Auto Cutter
Model
Cutting
Method
Paper width(mm)
Paper thickness(μm)
Cutting type
Operating time(sec/cycle)max
Cut frequency(cut/min)max
Motor
Detector(control switch)
Operating
Voltage(V)
Starting current(A)
Life(cut)
Dimensions(W x D x H mm)
Mass(g)
IFH002-01BK
PTH01P02
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Optional Font
Downloaded Character
User-defined Character
Character type
Extend Graphics Character set
Katakana Character set
JIS 1&2 level Kanji
Communication interface
CPU
ACUH205A
Circular type
58 +0
-1
60 to 80 *1
Partial cut
(Right side single edge point remained)
0.8(operating voltage 5.0V. 25˚C)
20
4.2 to 8.5
4.5 to 5.5
1.26(6V on)
500,000
91.0 x 47.6 x 12.7
Approx.46
*1 Use recommended thermal papers
Standalone
Panel-Mount
Printer Unit
Peak current(A)
Model
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
PTH01P02
80pin QFP
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
5 +/- 0.5%
C-MOS LSI
Parallel, Serial
Character type
Extended graphics character set,
Other characters is available with CGs*1 or external ROM
Character matrix
(H x W dots)
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
Dimensions(W x D x H mm)
Panel-Mount
Standalone
Printer Unit
Power supply(V)
Sub-assembled
Printer Unit
Detection
Other Models
Line up
Printing
LTPH245
Thermal line dot printing
384
8
58 +0
-1
48
62.5
Curved
By thermistor
By mechanical switch
By photo interrupter
4.5 to 5.5
4.2 to 8.5
2.7 (8.5V / 64 dots)
0.46
100 million
50 *1
-30 to 70
76.8 x 38.0 x 16.0 *2
Approx.46
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Platen position detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
17.2 x 17.2 x 1.7
*1 CG ROM: Japanese, Korean
Safety Precautions
Model
8
Thermal Printer
Low
Voltage
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
LTPV Series
Measuring
Instrument
Portable
Printer
Label
Ticket
Printer
Low24Volt
Voltage
Max printing speed: 85mm/sec
Easy paper operation
Platen latch function
Supports labels and thick paper
LTPV345 (Platen is released)
LTPV345
LTPV345
Model
24Volt
Serial
Printer
Printing
Mobile
Mobile Printer
Printer
Detection
Power Supply(V)
Peak current(A)
Service life
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Sub-assembled
Sub-assembled
Printer
Printer Unit
Unit
Other
Other Models
Models
Line
Line up
up
Safety
Safety Precautions
Precautions
9
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec max)
Paper path
Head temperature
Platen position detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance (km)
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
LTPV445
Thermal line dot printing
832
576
8
80 +0
-1
72
112 +0
-1
104
85
Straight
By thermistor
By mechanical switch
By photo interrupter
4.5 to 5.5
4.2 to 8.5
3.33 (8V / 64 dots)
1.0
100 million
50 *1
0 to 50
93.0 x 34.5 x 39.5 *2
Approx.95
125.0 x 34.5 x 39.5 *2
Approx.115
*1 Use recommended thermal papers *2 Excluding protrusion
Interface
Model
CPU
Operating voltage(V)
Character matrix(H x W dots)
Optional font
Downloaded character
User-defined character
Character
type
Extend graphics character set
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
IFV101-01B
IFV101-01BK
PTV10P01
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Parallel, Serial(C-MOS)
70.0 x 60.0 x 10.6
CPU
Model
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix(H x W dots)
Dimensions(W x D x H mm)
PTV10P01
128pin QFP
Vp:4.2 to 8.5, Vcc:4.5 to 5.5
18.43 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set, Other characters is available with CGs *1 or external ROM
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
22.0 x 16.0 x 3.1
*1 CG ROM: Japanese, Korean
Thermal Printer
Low
Voltage
Loading Mechanism
Thermal Printer Mechanism
Low Voltage
LTP1245
CARD
LTP1245
Power supply(V)
Peak current(A)
Service life
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
Serial
Printer
24Volt
Mobile Printer
Detection
*1 Use recommended thermal papers *2 Excluding protrusion
CPU
Interface
Model
CPU
Operating Voltage(V)
Character matrix(H x W dots)
Optional font
Downloaded character
User-defined character
Character type
Extend graphics character set
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
Model
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
IF1101-01BK
IF1101-01B
PT110P01
Vp:4.2 to 8.5, Vcc:4.5 to 5.5
16dots characters : 16 x 8,16 x 16
24dots characters : 24 x 12,24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Parallel, Serial(C-MOS)
70.0 x 100.0 x 11.6
Character type
Character matrix
(H x W dots)
Dimensions(W x D x H mm)
ACU6205A
Method
Paper width(mm)
Paper thickness(μm)
Cutting
Cutting type
Operating time(sec/cycle)max
Cutting pitch(mm)min
Cut frequency(cut/min)max
Motor
Operating
Voltage(V)
Detector(control switch)
Starting current(A)
Life(cut)
Dimensions(W x D x H mm)
Mass(g)
ACU6205B
Circular type
58 +0
-1
54 to 75 *1
Full cut
Extended graphics character set,
Other characters is available
with CGs *1 or external RAM
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
22.0 x 16.0 x 3.1
17.2 x 17.2 x 1.7
*1 CG ROM: Japanese, Korean
Auto Cutter
Model
PT110P01
PT120P02
128pin QFP
80pin QFP
Vp:4.2 to 8.5, Vcc:4.5 to 5.5
18.43 +/- 0.5%
5 +/- 0.5%
C-MOS LSI
Parallel, Serial
Partial cut
(Leave right side edge)
0.6 (Operating voltage 6.0V, 25˚C)
10
30
4.2 to 6.0
4.5 to 5.5
1.0 (5V on)
300,000
81.9 x 54.0 x 12.0
Approx.50(without support plate)
*1 Use recommended thermal papers
Panel-Mount
Standalone
Printer Unit
Printing
LTP1245
Thermal line dot printing
384
8
58 +0
-1
48
62.5
Curved / Straight
By thermistor
By photo interrupter
By photo interrupter
4.5 to 5.5
4.2 to 8.5
2.7 (8.5V / 64 dots)
0.46
100 million
50 *1
-30 to 70
72.0 x 39.5 x 16.0 *2
Approx.45
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Head-up detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
Standalone
Panel-Mount
Printer Unit
Model
Sub-assembled
Printer Unit
Max printing speed: 62.5mm/sec
Compact and light-weight
Paper feed knob model available
Straight and curved path models available
Operating temperature: -30˚C to 70˚C
24Volt
Low
Voltage
Portable
Printer
Other Models
Line up
Measuring
Instrument
EFT/POS
Safety Precautions
POS/ECR
10
Thermal Printer
Low
Voltage
Loading Mechanism
Thermal Printer Mechanism
Low Voltage
LTP8235
POS/ECR
Measuring
Instrument
Portable
Printer
Low24Volt
Voltage
Max printing speed: 60mm/sec
Compact and light-weight
Resolution: 6dots/mm
Loading type
LTP8235
Model
Serial
Printer
24Volt
Printing
Detection
Mobile Printer
Printer
Mobile
Panel-Mount
Standalone
Printer Unit
Unit
Printer
Standalone
Panel-Mount
Printer Unit
Unit
Printer
Sub-assembled
Sub-assembled
Printer Unit
Unit
Printer
Other Models
Models
Other
Line up
up
Line
Safety Precautions
Precautions
Safety
11
Power supply(V)
Peak current(A)
Service Life
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec) max
Paper path
Head temperature
Operation voltage(Vdd)
Operation voltagew(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(Km)
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
LTP8235
Thermal line dot printing
288
6
58+0
-1
48
60
Curved
By thermistor
4.5 to 5.5
6.0 to 8.0
4.6 (8V / 144 dots)
0.79 (8V)
50 million
50 *1
0 to 50
72.0 x 38.0 x 15.6 *2
Approx.50
*1 Use recommended thermal papers *2 Excluding protrusion
CPU
Model
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix(H x W dots)
Dimensions(WxDxH mm)
PT800P01
80pin QFP
Vp:6.0 to 8.0, Vcc:4.5 to 5.5
5 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set, Other characters is available with CGs *1 or external ROM
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
17.2 x 17.2 x 1.7
*1 CG ROM: Japanese, Korean
Thermal Printer
24V
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
CAPG247
LTPG247
Measuring
Instrument
Max printing speed: 150mm/sec
Small and compact
Easy paper operation
Windows® drivers (Windows® 2000/XP) *In use with IFG001-01SK/010K
Auto Cutter
Service life
Serial
Printer
24Volt
3.14 to 3.46 / 4.75 to 5.25
21.6 to 26.4
5.2 (26.4V / 288 dots)
0.4 / 0.37 *1
-
0.5
Slide type
54 to 80 *2
Full cut / Partial cut (Leave center point)
0.5
10
30
100 million
100 *2
1,000,000
0 to 50
Operating temperature(ºC)
Dimensions(W x D x H mm)
Mass(g)
80.5 x 65.0 x 22.2 *3
Approx.180
79.5 x 43.0 x 17.4 *3
Approx.80
*1 2-2 phase and W1-2 excitation method *2 Use recommended thermal papers *3 Excluding protrusion
Windows® is the registered trademark of Microsoft Corporation (USA).
IFG001-01UK
IFG001-01SK
PTG00P01
CAPG247, LTPG247
Vp:21.6 to 26.4
Character matrix(H x W dots)
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Optional font
Downloaded character
Character User-defined character
Extend graphics character set
type
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Serial(RS-232C)
USB
75.0 x 75.0 x 16.0
CPU
Model
Thermal printer
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix
(H x W dots)
Dimensions(W x D x H mm)
PTG00P01
CAPG247, LTPG247
128pin QFP
Vp:21.6 to 26.4, Vcc:3.0 to 3.6
18.43 +/-0.5%
C-MOS LSI
Parallel, Serial, USB
Extended graphics character set,
Other characters is availabe with CGs*1
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Sub-assembled
Sub-assembled
Printer
Printer Unit
Unit
Interface
Model
CPU
Thermal printer
Operating Voltage(V)
Mobile
Mobile Printer
Printer
-
By mechanical switch
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Peak current(A)
LTPG247
Thermal line dot printing
432
8
58 +0
-1
54
150
Curved
By thermistor
By mechanical switch
By photo interrupter
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Power supply(V)
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Platen position detection
Out of paper detection
Cutter home position
Operation Voltage(Vdd)
Operation Voltage(Vp)
Head
Motor
Cutter
Method
Paper thickness(μm)
Cutting type
Operating time(sec/cycle)max
Cutting pitch(mm)min
Cut frequency(cut/min)max
Pulse activation(pulse)
Abrasion resistance(km)
Life(cut)
IFG001-01UK
Other
Other Models
Models
Line
Line up
up
Detection
CAPG247
(With auto cutter)
CAPG247
Model
Printing
LTPG247
Safety
Safety Precautions
Precautions
EFT/POS
24Volt
Low
Voltage
CARD
POS/ECR
22.0 x 16.0 x 3.15
*1 CG ROM: Japanese
12
Thermal Printer
24V
Easy Paper Operation Mechanism
Thermal Printer Mechanism
Low Voltage
LTPF Series
CARD
POS/ECR
Measuring
Instrument
EFT/POS
KIOSK
System
24Volt
Low
Voltage
Max printing speed: 220mm/sec
Easy paper operation
Platen latch function
Heavy-duty: 100mil. pulse, 100km
Auto cutter option (Slide type) available
OPOS drivers (Windows ® 2000/XP)
Serial
Printer
24Volt
LTPF247E
LTPF347F
Thermal line dot printing
LTPF247F
Model
Printing
Mobile Printer
Detection
Power supply(V)
Peak current(A)
Service Life
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Platen position detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
Panel-Mount
Standalone
Printer Unit
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
LTPF247 (with auto cutter)
LTPF347
432
576
8
58 +0
-1
54
80 +0
-1
72
100
220
100
Curved
By thermistor
By mechanical switch
By photo interrupter
4.75 to 5.25
21.6 to 26.4
2.6 (26.4V / 144 dots)
5.4 (26.4V / 128 dots)
2.6 (26.4V / 144 dots)
5.4 (26.4V / 128 dots)
0.46
0.55
0.46
0.55
100 million
100 *1
0 to 50
86.2 x 54.0 x 25.8 *2
110.2 x 54.0 x 25.8 *2
Approx.150
Approx.175
220
*1 Use recommended thermal papers *2 Excluding protrusion
Windows® is the registered trademark of Microsoft Corporation (USA).
CPU
Interface
Standalone
Panel-Mount
Printer Unit
Model
CPU
Thermal printer
Operating voltage(V)
IFF201-01TK
IFF001-01B IFF001-01BK
IFF201 only
PTF00P01
LTPF247E, LTPF347E
LTPF247F, LTPF347F
Vp:21.6 to 26.4
Vp:21.6 to 26.4, Vcc: 4.5 to 5.5
Character matrix(H x W dots)
Sub-assembled
Printer Unit
Optional font
Downloaded character
Character User-defined character
type
Extend graphics character set
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Model
Thermal printer
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix
(H x W dots)
Parallel,
Serial(C-MOS)
Parallel, Serial(RS-232C),
USB
80.0 x 100.0 x 19.6
87.0 x 72.0 x 12.0
Dimensions(W x D x H mm)
Other Models
Line up
Model
Thermal Printer
Method
Paper width (mm)
Paper thickness (m)
Cutting
Cutting type
Safety Precautions
Operating time (sec/cycle)max
Cutting pitch (mm)min
Cut frequency (cut/min)max
Motor
Operating
Voltage(V)
Detector (control switch)
Starting Current (A)
Life (cut)
Dimensions(W x D x H mm)
Mass(g)
PTF00P01
PTF20P01
LTPF247F, LTPF347F
LTPF247E, LTPF347E
144pin QFP
128pin QFP
Vp:21.6 to 26.4
Vp:21.6 to 26.4
Vcc:4.5 to 5.5
Vcc:4.75 to 5.25
27 +/- 0.5%
18.43 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set,
Other characters is availabe with CGs*1 or external ROM
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
22.0 x 22.0 x 3.05
22.0 x 16.0 x 3.15
*
1 CG ROM: Japanese, Korean
Auto Cutter
Winder Unit
ACUF224J
ACUF224H
ACUF324J
ACUF324H
LTPF247
LTPF347
Slide type
58 +0
80 +0
-1
-1
60 to 80 *1
Partial cut
(Leave center point)
Full cut
Partial cut
(Leave center point)
Full cut
0.6(24V)
10
30
21.6 to 26.4
4.5 to 5.5
1.2
1,000,000
80.0 x 64.0 x 19.0
102.0 x 64.0 x 19.0
Approx.130
Approx.150
*1 Use recommended thermal papers
13
LTPF347E
Model
Thermal Printer
Paper width(mm)
Paper thickness(m)
Outside diameter of paper roll (mm)max
Inside diameter of paper roll (mm)min
Operating Voltage(V)
Speed (mm/s)max
Life(operating hours)
Dimensions(W x D x H mm)
Mass(g)
WU282
LTPF247F
58 +0
-1
70 to 80
φ83
φ20
21.6 to 26.4
220
160
87.8 x 92.0 x 97.6
Approx.136
Thermal Printer
24V
Loading Mechanism
Thermal Printer Mechanism
Ticket
Printer
Max printing speed: 90mm/sec
Straight path and curved path models available
Supports labels and thick paper
LTP2342
Detection
Power supply(V)
Peak current(A)
Service life
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
60 +0
-1
54
90
832
112 +0
-1
104
75
Straight / Curved
By thermistor
By mechanical switch
By photo interrupter
4.75 to 5.25
21.6 to 26.4
4.3 (26.4V / 288 dots)
0.5
100 million
50 *1
0 to 50
106.4 x 61.4 x 27.0 *2
Approx.135
85.2 x 61.4 x 27.0 *2
Approx.115
138.2 x 61.4 x 27.0 *2
Approx.160
*1 Use recommended thermal papers *2 Excluding protrusion
CPU
Interface
Model
CPU
Operating voltage(V)
Character matrix(H x W dots)
Optional font
Downloaded character
Character
User-defined character
type
Extend graphics character set
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
IF2303-01BK
IF2303-01B
PT230P01
Vp:21.6 to 26.4, Vcc:4.5 to 5.5
16 dots characters : 16 x 8,16 x 16
24 dots characters : 24 x 12,24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Parallel, Serial(C-MOS)
90.0 x 100.0 x 22.0
Model
Package form
Operating Voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix
(H x W dots)
Dimensions(W x D x H mm)
Model
Method
Paper width(mm)
Paper thickness(m)
Cutting type
Cutting
Operating time(sec/cycle)max
Cutting pitch(mm)min
Cut frequency(cut/min)max
Motor
Operating
Voltage(V)
Detector(control switch)
Starting current (A)
Life (cut)
Dimensions(W x D x H mm)
Mass(g)
PT230P01
128pin QFP
Vp:21.6 to 26.4, Vcc:4.5 to 5.5
18.43 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set,
Other characters is available with CGs *1 or external RAM
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
22.0 x 16.0 x 3.1
*1 CG ROM: Japanese, Korean
Auto Cutter
ACU2224
ACU2424
ACU2324
Slide type
80 +0
60 +0
112 +0
-1
-1
-1
65 to 125 *1
Full cut / Partial cut(Leaving center point)
0.5
10
30
21.6 to 26.4
4.75 to 5.25
1.2
300,000
100.0 x 66.5 x 17.0 126.0 x 69.3 x 17.5
79.0 x 66.5 x 16.5
Approx.200
Approx.120
Approx.260
*1 Use recommend thermal papers
Serial
Printer
24Volt
432
LTP2442
LTP2342
Thermal line dot printing
576
8
80 +0
-1
72
Mobile
Mobile Printer
Printer
Printing
LTP2242
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head-up detection
Platen position detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Model
24Volt
Low
Voltage
LTP2242
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Label
Sub-assembled
Sub-assembled
Printer
Printer Unit
Unit
KIOSK
System
Other
Other Models
Models
Line
Line up
up
Measuring
Instrument
Safety
Safety Precautions
Precautions
POS/ECR
Low Voltage
LTP2000 Series
14
Thermal Printer
24V
Loading Mechanism
Thermal Printer Mechanism
Low Voltage
CAP9000 Series
Measuring
Instrument
KIOSK
System
Barcode
CAP9347
Ticket
Printer
24Volt
Low
Voltage
Max printing speed: 250mm/sec
Super small 2",3",4" heavy-duty mechanism
Supports thick paper
Operation temperature: -20˚C to 60˚C
Windows ® drivers (Windows ® 2000/XP) *In use with IF9001-01U/01S/01P
Model
Serial
Printer
24Volt
Printing
Mobile Printer
Printer
Mobile
Detection
Power supply(V)
Peak current(A)
Panel-Mount
Standalone
Printer Unit
Unit
Printer
Auto Cutter
Service life
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Out of paper detection
Mark position detection
Platen position detection
Cutter position detection
Operation Voltage(Vdd)
Operation Voltage(Vp)
Head
Motor
Method
Paper thickness(μm)
Cutting type
Operating time (sec/cycle) max
Cutting pitch (mm) min
Cut frequency (cut/min) max
Pulse activation(pulse)
Abrasion resistance(km)
Life(cut)
Standalone
Panel-Mount
Printer Unit
Unit
Printer
Operating temperature (ºC)
Dimensions (W x D x H mm)
Mass(g)
CAP9247
CAP 9347
448
640
+0
58 +0
-1 / 60 -1
54 / 56
+0
80+0
-1 / 82.55 -1
76 / 80
250
LTP9247
LTP9247
CAP 9447
Thermal line dot printing
448
832
8
+0
58 +0
112 +0
-1
-1 / 60 -1
54 / 56
104
150
Curved / Straight
By thermistor
By photo interrupter
By photo interrupter
By mechanical switch
LTP9347
LTP9447
640
832
+0
80+0
-1 / 82.55 -1
76 / 80
112 +0
-1
104
150
250
By mechanical switch
4.75 to 5.25
21.6 to 26.4
5.9 (26.4V / 128 dots)
1.0
Slide type
57 to 155 *1
Full cut / Partial cut (Leave center point)
2
10
30
150 million
150 *1
-20 to 60
89.5 x 50.0 x 30.0 *2 112.0 x 50.0 x 30.0*2 140.75 x 59.3x 32.0*2 88.8 x 50.0 x 29.7*2 111.25 x 50.0 x 29.7*2 140.75 x 57.5 x 29.7*2
Approx.240
Approx.150
Approx.390
Approx.240
Approx.290
Approx.180
1,000,000
*1 Use recommended thermal papers *2 Excluding protrusion
Windows® is the registered trademark of Microsoft Corporation (USA).
CPU
Sub-assembled
Sub-assembled
Printer Unit
Unit
Printer
Other Models
Models
Other
Line up
up
Line
Safety Precautions
Precautions
Safety
15
Model
Function
Thermal Printer
Package form
Operating voltage (Vcc3)
Operating voltage (Vcc5)
Operating voltage (Vp)
Operating frequency (MHz)
Configuration
PTL32A00
FWRom
LTP9000, CAP9000
176-pin QFP
3,267 to 3,333
4,75 to 5,25
21,6 to 26,4
29,49 ± 0,5 %
C-MOS LSI
Parallel (IEEE 1284 based)
Serial (C-MOS level)
USB (Ver. 2.0 full speed)
(-20 to +60°C)
Extended graphics character set,
Katakana character set, JIS 1st and 2nd
level Kanji, Chinese *2, Korean *2,
downloaded character user-defined
character, optional font
Input control method
Operating Temperature
Character type
Character matrix (H x W dots)
1-byte character
2-byte character
Dimensions (W x D x H mm)
PT900P01
CPU
LTP9000, CAP9001
48-pin TSOP (Type I)
16 dot
24 dot
16 x 8
16 x 16
26.0 x 26.0 x 3.0
24 x 12
24 x 24
20.0 x 12.0 x 1.2
IF9001-01U
IF9001-01S
IF9001-01P
Low Voltage
Interface Board
Interface
IF9001-01P
IF9001-01S
IF9001 only
CAP9247, CAP9347, CAP9447
Vp:21.6 to 26.4
16 dots characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Parallel
Serial (RS-232C)
108.0 x 90.0 x 28.0
Yes
Yes
Yes
Yes
Yes
Yes
USB
Sub-assembled
Printer Unit
Panel-Mount
Printer Unit
Standalone
Printer Unit
For versatile applications
24Volt
IF9001-01U
Mobile Printer
Model
CPU
Thermal printer
Operating voltage(V)
Character matrix(H x W dots)
Optional font
Downloaded character
Character
User-defined character
type
Extended graphics character set
Katakana character set
JIS 1&2 level kanji
Communication interface
Dimensions(W x D x H mm)
Parking
Other Models
Line up
Ticket
Safety Precautions
ATM
16
Thermal Printer
Mobile Printer
Mobile Printer
DPU-S445
Measuring
Instrument
PDA
Barcode
Low Voltage
Max printing speed: 90mm/sec
Interface: Bluetooth, USB, IrDA(ver1.2), Serial
Small and Light-weight
Easy paper operation
Available roll, label and cut sheet paper
Windows ® drivers: Windows ® XP/Vista
Model
24Volt
Printing
Mobile Printer
Standalone
Printer Unit
Panel-Mount
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
17
Methods
Number of dots/line
Resolution (dots/mm)
Paper width (mm)
Printing width (mm)
Speed (mm/sec)max
Outside diameter of paper roll (mm)max
Character matrix (HxW dots)
Character dimensions (HxW mm)
Number of columns
Type of Paper
Character type
Barcode
Power supply (V)
Communication interface
Input buffer
Command
Cutting
Operating
Strage
Temperature (˚C)
Humidity (%RH)
Temperature (˚C)
Humidity (%RH)
Service Life (km)
Dimensions (WxDxH mm)
Mass (g)
Standard
Option
DPU-S445
DPU-S445
Thermal line dot printing
832
8
112 +0
-1
104
90
φ 50
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
52, 26, 69, 34
Roll Paper, Label Roll Paper, Cut Sheet Paper
Optional Font, Downloaded Character, User-defined Character,
Extend Graphics Character set ,Katakana Character set, JIS 1&2 level Kanji
UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE128, PDF417, QR Code, MaxiCode, Data Matrix
Li-lon Battery, Specified AC adapter
Bluetooth *1, USB, IrDA(ver1.2), Serial
4K bytes
ESC/P *2 conformity
Tear bar
0 to 50
30 to 80 (Non condensation)
-25 to 60
5 to 90 (Non condensation)
50 *3
145 x 135 x 58 *4
Approx.490 *5
FCC, CE, VCCI
AC adapter, Battery pack, Battery Charger, AC cable, USB cable, Serial cable
*1 Only bluetooth model *2 ESC/P™:Registered trademark of SEIKO EPSON CORP. *3 Use recommended thermal papers *4 Excluding protrusion *5 including battery, excluding roll paper
Thermal Printer
Mobile Printer
Mobile Printer
Low Voltage
DPU-3445
DPU-3445
Optional Font, Downloaded Character,User-defined Character
Extend Graphics Character set, Katakana Character set, JIS 1&2 level Kanji
Character type
Barcode
Power supply(V)
Communication interface
Input buffer
Command
Cutting
Operating
Strage
Tmperature(degree)
Humidity(%RH)
Temperature(degree)
Humidity(%RH)
UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE128
Li-Ion Battery DC7.2V, Specified AC adapter DC9.3V
IrDA (ver1.0), BHT Ir protocol, RS-232C (6-pin Modular jack)
4K bytes
ESC/P *1 conformity
Tear bar
5 to 40
30 to 80 (Non condensation)
-10 to 50
5 to 90 (Non condensation)
30 *2
160.0 x 89.0 x 29.5 ( printer unit) *3
Approx.250 ( printer unit)
FCC, CE, VCCI, CCC
Service life(km)
Dimensions
Mass(g)
Standed
Option
AC Adapter, Paper holder, Battery pack, Battery Charger, AC cable, Serial cable
*1 ESC/P™ : Registered trademark of SEIKO EPSON CORP. *2 Use recommended thermal papers *3 Excluding protrusion
Serial interface specification
Item
Specification
Baud rate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Data bit
7bits, 8bits
Parity bit
Odd, Even, or None
Stop bit
1bit, 2bits
Control method
H/W BUSY, Xon/Xoff
Infrared interface specifications
Based on IrDA Ver. 1.0
For
Serial
Printer
24Volt
Printing
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Character matrix (H x W dots)
Character size(H x W mm)
Number of columns
Mobile Printer
DPU-3445-30A
Thermal line dot printing
832
8
112 +0
-1
104
50
Curved
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
52, 26, 69, 34
Model
Panel-Mount
Standalone
Printer Unit
DPU-3445 (with Paper Holder)
Standalone
Panel-Mount
Printer Unit
Max printing speed: 50mm/sec
Compact and light-weight
Available 2 ply paper, label paper and cut sheet printing feature
Available barcode printing feature
24Volt
Low
Voltage
Barcode
Field Sales
Sub-assembled
Printer Unit
PDA
Other Models
Line up
Measuring
Instrument
Safety Precautions
Based on BHT Ir protocol
18
Thermal Printer
Mobile Printer
Mobile Printer
MPU-L465 Series
PDA
Barcode
Ticket
Printer
Label
Low Voltage
Max printing speed: 85mm/sec
High resolution: 300dpi
Paper width(max): 115mm
Operating temperature: -15˚C to 50˚C
Communication interface: Bluetooth, USB, Serial
Easy paper operation
Windows ® drivers (Windows ® 2000/XP)
MPU-L465
24Volt
Model
Mobile Printer
Printing
Version
Method
Speed(mm/sec)max
Number of dots/line
Printing width(mm)
Resolution(dpi)
Line spacing(mm)
Paper form
Paper width(mm)
Outside diameter of paper roll(mm)max
Inside diameter of paper roll(mm)min
Size of a character(H×W dots)
MPU-L465-02
Desktop version
MPU-L465-17
Peeler version
Katakana Character, Extend Graphics Character, Downloaded Character,
JIS1&2 level Kanji, User-defined Character, Optional Font
Character type
Standalone
Printer Unit
UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE93, CODE128/EAN128
PDF417, QR Code, MaxiCode, Data Matrix
USB, RS-232-C
USB, RS-232-C, Bluetooth (SPP) *1
USB, RS-232-C, Bluetooth (SPP) *1
ESC/POS*2 conformity
-15 to 50
10 to 85 (Non condensation)
168 × 155 × 87 *3
Approx.760 *4
Approx.870 *5
Approx.900 *5
(Li-Ion Battery) 2000
FCC, CE, VCCI
Barcode
2D Barcode
Communication interface
Panel-Mount
Printer Unit
Command
Operating temperature(˚C)
Operating humidity(%)
Dimensions(W×D×H mm)
Mass(g)
Battery(mAh)
Standard
Battery pack, AC adapter, Battery charger,
AC cable, Belt clip, Strap,Serial cable, USB cable
Option
*1 Only Bluetooth model *2 ESC/POS™ : Registered trademark of SEIKO EPSON CORP. *3 Excluding protrusion, including rubber cover *4 Excluding strap, roll paper, battery and belt clip
*5 Excluding strap and roll paper, including battery and belt clip
Windows® is the registered trademark of Microsoft Corporation (USA).
MPU-L465-17
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
19
MPU-L465-16
Bluetooth version
Thermal line dot printing
85
1280
108.4
300
0.085
Roll paper
70 to 115
58
φ8.0, φ12.0, φ25.4
24×12, 24×24, 36×18, 36×36
Peeler Model
Medical/Healthcare
MPU-L465-17
Inventory Management
Peeler Model
High resolution
head (300dpi) provides clear
UCC/EAN128 barcode print
in small space.
Built-in rechargeable battery
provides portability for
on-site printing in warehouse.
MPU-L465-16,MPU-L465-02
Standard Model
Software Tools
Production Control
Portable and universal design
allow to place it on either
desktop or wall mount style.
Convenient software tools available
for assisting application development.
Template layout / download software
UTILITY software
TemplateAssist
sii_dipsw
Thermal Printer
Standalone Printer Unit
Low
Voltage
Standalone Printer Unit
Low Voltage
DPU-V445
Operating
Storage
Service life
Temperature (˚C)
Humidity (%RH)
Temperature (˚C)
Humidity (%RH)
Pulse activation
Abrasion resistance (km)
Dimensions (WxDxHmm)
Mass (g)
Standard
Option
*1 power supply: AC adapter *2 ESC/POS™ : Registered trademark of SEIKO EPSON CORP. *3 Excluding protrusion *4 without battery, paper AC adapter
Windows® is the registered trademark of Microsoft Corporation (USA).
24Volt
Serial
Printer
Mobile Printer
Character type
Power supply (V)
Data input method
Input buffer
Command
Cutting
DPU-V445-10B
Thermal line dot printing
832
8
112 +0
-1
104
80 *1
Curved
24 x 24, 24 x 12, 16 x 16, 16 x 8
3.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0
34, 69, 52, 104
Downloaded Character, User-defined Character, Alphanumeric, Katakana Character set, JIS 1&2 level Kanji
Specified AC adapter, Li-Ion Battery
USB(ver1.1), IrDA(ver1.1)
1,024 bytes
ESC/POS™ conformity *2
Tear Bar
0 to 40
30 to 80 (Non condensation)
-20 to 60
20 to 85 (Non condensation)
100 million
50
154 x 129 x 66.3 *3
470 *4
FCC, CE, VCCI
AC Adapter, AC cable, Battery pack, Battery charger
Standalone
Panel-Mount
Printer Unit
Printing
Method
Number of dots/line
Resolution (dots/mm)
Paper width (mm)
Printing width (mm)
Speed (mm/sec) max
Paper path
Character matrix (HxW dots)
Character size (HxW mm)
Number of columns
Panel-Mount
Standalone
Printer Unit
Model
Sub-assembled
Printer Unit
DPU-V445
(Top cover is opened)
Other Models
Line up
DPU-V445
Safety Precautions
Max printing speed: 80mm/sec
Interface: USB, IrDA
Easy paper operation
Windows®drivers
(Windows®2000/XP)
Low
Voltage
24Volt
Measuring
Instrument
20
Thermal Printer
Standalone Printer Unit
Standalone Printer Unit
Low Voltage
DPU-H245
Measuring
Instrument
Low
Voltage
24Volt
Max printing speed: 50mm/sec
Easy paper operation
Compact and light-weight
Available serial and parallel model
DPU-H245
DPU-H245AS-A03A
Model
24Volt
Serial
Printer
Printing
Mobile Printer
Method
Number of dots/line
Resolution(dots/mm)
Paper width (mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Character matrix(H x W dots)
Character size(H x W mm)
Number of columns
Character type
Power supply(V)
Battery
Communication interface
Input buffer
Command
Cutting
Standalone
Panel-Mount
Printer Unit
Operating
Temperature(˚C)
Humidity(%RH)
Service life(km)
Dimensions(W x D x H mm)
Mass(g)
Standard
Option
DPU-H245AS-B03A
DPU-H245AP-A03A
Thermal line dot printing
384
8
58 +0
-1
Mode A (default): 41.5, Mode B: 48.0
50
Curved
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
24, 12, 32, 16
Downloaded Character, User-defined Character, Extend Graphics Character set, katakana Character set, JIS 1&2 level Kanji
Specified AC adapter, Ni-MH Battery
Included
Serial(RS-232C, D-sub 9pins)(metric screw) Serial(RS-232C, D-sub 9pins)(inch screw)
Parallel (Centronics 14pins)
512 bytes
SII standard
Tear bar
0 to 40
30 to 80 (Non condensation)
50 *1
135.0 x 100.0 x 38.0 *2
Approx.390 (Including Battery)
FCC, CE, VCCI
AC Adapter, AC Cable
*1
Panel-Mount
Standalone
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
21
Serial interface specification
Use recommended thermal papers
Parallel interface specification
Item
Specification
Item
Specification
Baud rate
150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400bps
Synchronization
Synchronized with STROBE signal
Data bit
7bits, 8bits
Handshaking
Synchronized with BUSY signal
Parity bit
Odd, Even, or None
Signal level
TTL level
Stop bit
1bit
Control method
H/W BUSY, Xon/Xoff
*2
Excluding protrusion
Thermal Printer
Standalone Printer Unit
Standalone Printer Unit
Low Voltage
DPU-414
Input buffer
Command
Cutting
Operating
Temperature(˚C)
Humidity(%RH)
500,000 *2
Service life (line)
Dimensions(W x D x Hmm)
Mass(g)
Standerd
Option
160.0 x 170.0 x 66.5 ( printer unit only)*3
Approx.580 ( without Battery)
FCC, CE, VCCI, CCC
AC Adapter, Battery
*
1 ESC/P ™ : Registered trademark of SEIKO EPSON CORP.
Serial interface specification
*2
Use recommended thermal papers
Serial
Printer
24Volt
*3 Excluding protrusion
Parallel interface specification
Item
Specification
Item
Specification
Baud rate
75, 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
Synchronization
Synchronized with STROBE signal
Data bit
7bits, 8bits
Handshaking
Synchronized with ACK and BUSY signal
Parity bit
Odd, Even, or None
Signal level
TTL level
Stop bit
1bit
Control method
H/W BUSY, Xon/Xoff
Standalone
Panel-Mount
Printer
Printer Unit
Unit
Communication interface
Sub-assembled
Printer
Printer Unit
Unit
Character type
Power supply(V)
Battery
DPU-414-30B
Thermal serial dot printing
9 x 320
112+0
-1
89.6
52.5
Curved
9x7
2.5 x 1.9, 2.5 x 0.9 (Condensed)
40, 80 (Condensed)
Extend Graphics Character set, Alphanumeric, International Characters, Katakana Character set
Specified AC adapter, Ni-MH Battery
Without (option)
Parallel (36pins Amphenol), Serial (9pins D-SUB)
28K bytes
ESC/P *1 conformity
Tear bar
0 to 40
30 to 80 (Non condensation)
Other Models
Line
Line up
up
Printing
Method
Number of dots/line(H x W)
Paper width(mm)
Printing width(mm)
Speed(character/sec)max
Paper path
Character matrix(H x W dots)
Character size(H x W mm)
Number of columns
Safety Precautions
Model
Mobile Printer
DPU-414
Panel-Mount
Standalone
Printer
Printer Unit
Unit
Max printing speed: 52.5 character/sec
Available international character
Interface: Serial and parallel
24Volt
Low
Voltage
Measuring
Instrument
22
Thermal Printer
Low
Voltage
Panel-Mount Printer Unit
Panel-Mount Printer Unit
Low Voltage
DPU-30
DPU-12
24Volt
Low
Voltage
Measuring
Instrument
DPU-30
Max printing speed: 50mm/sec(DPU-30), 60mm/sec(DPU-12)
Easy paper operation(DPU-30), Loading type(DPU-12)
Available auto cutter model and tire-bar model(DPU-12)
Model
Serial
Printer
24Volt
Printing
Mobile Printer
Power supply(V)
Communication interface
Panel-Mount
Standalone
Printer Unit
Input buffer
Command
Cutting
Storage
Service life
Standalone
Panel-Mount
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
23
Thermal line dot printing
384
8
58 +0
-1
48
60
Straight
24 x 24, 24 x 12, 16 x 16, 16 x 8
3.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0
12, 24, 16, 32
Downloaded Character,
User-defined Character, Alphanumeric,
Katakana Character set, JIS 1&2 level Kanji
Optional Font, Downloaded Character,
User-defined Character, Extend Graphics Character set,
Katakana Character set, JIS 1&2 level Kanji
Driving Voltage (5.0 to 8.7)
Parallel (Centronics), Serial (RS-232C)
4K bytes
ESC/POS™ *1 conformity
Driving Voltage (to be supplied externally Vcc :4.5 to 5.5, Vp :4.2 to 8.5)
Serial (C-MOS)
252 bytes
SII standard
Tear bar
Tear bar
Temperature (˚C)
Humidity (%RH)
Temperature (˚C)
Humidity (%RH)
Pulse activation (pulse)
Abrasion resistance(km)
Dimensions(W x D x Hmm)
Mass(g)
Standard
DPU-12-1FS
DPU-12-0FS
DPU-30-0B
Thermal line dot printing
Method
384
Number of dots/line
8
Resolution (dots/mm)
58 +0
Paper width (mm)
-1
48
Printing width (mm)
50
Speed (mm/sec) max
Curved
Paper path
24 x 24, 24 x 12, 16 x 16, 16 x 8
Character matrix (HxW dots)
Character size (HxW mm) 3.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0
16, 32, 24, 48
Number of columns
Character type
Operating
DPU-12
0 to 50
30 to 80 (Non condensation)
-20 to 60
20 to 85 (Non condensation)
100 million
50 *2
101.0 x 116.0 x 61.0 *3
Approx.230
FCC, CE, VCCI
*1
Auto cutter
0 to 50
30 to 80 (Non condensation)
-20 to 60
5 to 90 (Non condensation)
100 million
50 *2
104.8 x 120.0 x 72.8 *3
Approx.340
Approx.290
FCC, CE, VCCI
ESC/POS™ : Registered trademark of SEIKO EPSON CORP.
*2
Use recommended thermal papers
*3
Excluding protrusion
Serial interface specification (DPU-30/DPU-12)
Parallel interface specification (DPU-30)
Item
Specification
Item
Specification
Baud rate
2400, 4800, 9600, 19200, 38400bps
Synchronization
Synchronized with STROBE signal
Data bit
7bits, 8bits
Handshaking
Synchronized with BUSY signal
Parity bit
Odd, Even, or None
Signal level
TTL level
Stop bit
1bit
Control method
H/W BUSY, Xon/Xoff
Thermal Printer
24V
Sub-assembled Printer Unit
Sub-assembled Printer Unit
KIOSK
System
Barcord
Ticket
Printer
Max printing speed: 200mm/sec
Roll paper capacity: φ228mm max
Presenter with automatic retracting function
Available Serial, Parallel and USB model
Available vertical and horizontal type
Drivers: Linux, Windows ® 2000/XP
KPU-S347
KPU-S447
Low
Voltage
24Volt
Measuring
Instrument
Low Voltage
KPU Series
*=S, P, U(S:Serial P:Parallel U:USB)
Character type
Barcode
2D Barcode
Power supply(V)
Communication interface
Command
Service life
Pulse activation(pulse)
Abrasion resistance(km)
640
KPU-S447*-11V
832
8
+0
+0
+0
+0
+0
58+0
-1 , 60 -1 , 66 -1 , 76.2 -1 , 80 -1 , 82.55 -1
54 to 80
200
112 +0
-1
104
150
Straight
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
Optional Font, Downloaded Character, User-defined Character, Extend Graphics Character set, Katakana Character set, JIS 1&2 level Kanji
UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE93, CODE128
PDF417
Option : Specified AC adapter
Serial(RS-232C), Parallel(IEEE1284 Nibble mode), USB selected model
ESC/POS *1 conformity
100 million
50 *2
Life of auto cutter(number of cutting)
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
Standard
Option
300,000
0 to 40
132.0 x 225.0 x 140.0 *3
132.0 x 235.0 x 140.0 *3
161.0 x 236.0 x 140.0 *3
161.0 x 248.0 x 140.0 *3
Approx.3000
Approx.3500
FCC, CE, VCCI
AC adapter, AC cable
24Volt
Serial
Printer
Methods
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Character matrix example(H x W dots)
Character size(H x W mm)
KPU-S347*-11V
KPU-S447*-11H
Thermal line dot printing
Mobile Printer
Printing
KPU-S347*-11H
Standalone
Panel-Mount
Printer Unit
Model
*1 ESC/POS™ : Registered trademark of SEIKO EPSON CORP. *2 Use recommended thermal papers *3 Excluding protrusion
Specification
Item
Specification
Baud rate
4800, 9600, 19200, 38400 bps
Synchronization
Synchronized with STROBE signal
Data bit
7bits, 8bits
Handshaking
Synchronized with ACK and BUSY signal
Parity bit
Odd, Even, or None
Signal level
TTL level
Stop bit
1bit, 2bits
Control method
H/W BUSY, Xon/Xoff
USB interface specification
USB printerclass 1.1 conformity
Sub-assembled
Sub-assembled
Printer Unit
Item
Other Models
Line up
Parallel interface specification
Safety Precautions
Precautions
Safety
Serial interface specification
Panel-Mount
Standalone
Printer Unit
Windowst® is the registered trademark of Microsoft Corporation (USA).
24
Thermal Printer
24V
Sub-assembled Printer Unit
Sub-assembled Printer Unit
Low Voltage
APU-F247
Measuring
Instrument
KIOSK
System
Gas-Pos
Low
Voltage
24Volt
Max printing speed: 100mm/sec
Easy paper operation
Roll paper capacity: φ 83mm max
Interface: Serial, Parallel and USB
Windows ® drivers (Windows ® 2000/XP)
APU-F247
Model
24Volt
Serial
Printer
Printing
APU-F247-1KT
Mobile Printer
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Character matrix(H x W dots)
Character dimensions(H x W mm)
Character type
Barcode
Power supply(V)
Communication interface
Input buffer
Command
Cutting
Standalone
Panel-Mount
Printer Unit
Service life
Method
Cutting type
Pulse activation(pulse)
Abrasion resistance(km)
Life(cut)
Operating temperature(ºC)
Dimensions(W x D x H mm)
Mass(g)
Standard
Option
APU-F247-2KT
Thermal line dot printing
432
8
58 +0
-1
54
100
Curved
24 x 24, 24 x 12, 16 x 16, 16 x 8
3.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0
Optional Font, Downloaded Character, User-defined Character, Extend Graphics Character set ,Katakana Character set ,JIS 1&2 level Kanji
UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE93, CODE128
21.6 to 26.4
Parallel(IEEE1284 Nibble mode), Serial(RS-232C), USB
1024 bytes
SII standard
Slide type
Partial cut
Full cut
100 million
100 *1
500,000
0 to 50
99.3 x 92.5 x 173.0 *2
Approx.1000
FCC, CE, VCCI
AC adapter, AC cable, Support plate, Sub board
Panel-Mount
Standalone
Printer Unit
*1
Serial interface specification
*2
Excluding protrusion
Parallel interface specification
Sub-assembled
Printer Unit
Item
Specification
Item
Specification
Baud rate
4800, 9600, 19200, 38400, 57600, 115200bps
Synchronization
Synchronived with STROBE signal
Data bit
8bits
Handshacking
Synchronived with ACK and PBUSY signal
Stop bit
1bits
Signal level
TTL level
Parity bit
None
Control method
H/W BUSY
Other Models
Line up
USB interface specification
USB printerclass 1.1 conformity
Safety Precautions
25
Use recommended thermal papers
Windows ® is the registered trademark of Microsoft Corporation (USA).
26
Safety Precautions
Other Models
Line up
Sub-assembled
Printer Unit
Panel-Mount
Printer Unit
Standalone
Printer Unit
Mobile Printer
24Volt
Low Voltage
Low Voltage
24Volt
Mobile Printer
Standalone
Printer Unit
Panel-Mount
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
27
Thermal Printer
Low
Voltage
Sub-assembled printer Unit
Sub-assembled printer Unit
SAM-1245
SAM-1245(with autocutter model)
Printing
Character type
SAM-1245-10
SAM-1245-10K
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Method
Number of dots/line
Resolution(dots/mm)
Printing width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Character matrix example(H x W dots)
Character size(H x W mm)
Number of columns
Optional font
Downloaded character
User-defined character
Extend graphics character set
Katakana character set
JIS 1&2 level Kanji
Power supply(V)
Communication interface
Cutting
Service life
Method
Cutting Type
Pulse activation(pulse)
Abrasion resistance(km)
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
Standard
None
None
SAM-1245-11
SAM-1245-11K
Thermal line dot printing
384
8
58 +0
-1
48
60
Curved
24 x 12, 24 x 24, 16 x 8, 16 x 16
3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0
24, 12, 32, 16
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
SAM-1245-12
SAM-1245-12K
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
24Volt
Serial
Printer
Model
Driving voltage (Vcc: 4.5 to 5.5, Vp:4.2 to 8.5)
Serial (C-MOS)
Circular
Partial cut
Full cut
100 million
50 *1
0 to 50
Mobile Printer
Max printing speed: 60mm/sec
Compact and light-weight
Available built-in auto cutter model
Low
Voltage
24Volt
KIOSK
System
Standalone
Panel-Mount
Printer Unit
Portable
Printer
91.0 x 54.2 x 40.25 *2
Approx.150
81.3 x 39.5 x 30.0 *2
Approx.92
FCC, CE, VCCI
*1
Use recommended thermal papers
*2
Excluding protrusion
Panel-Mount
Standalone
Printer Unit
Measuring
Instrument
Low Voltage
SAM1245
2400, 4800, 9600, 19200, 38400 bps
Data bit
7bits, 8bits
Parity bit
Odd, Even, or None
Stop bit
1bit
Control method
H/W BUSY, Xon/Xoff
Other Models
Line up
Specification
Safety Precautions
Item
Baud rate
Sub-assembled
Printer Unit
Serial interface specification
28
Thermal Printer
Other Models Lineup
Low Voltage
CARD
EFT/POS
Measuring
Instrument
Portable
Printer
PDA
Low
Voltage
24Volt
● Paper width of 80mm
● Also powered by nickel hydrogen batteries.
● Maximum printing speed (360 dotlines/sec = 45mm/sec) when operating on 7.0V.
● Prints on two-ply thermal and label paper.
● Automatic paper loading.
LTP3345
24Volt
Low Voltage
LTP3345
LTP3445
CARD
PDA
24Volt
Serial
Printer
Serial Printer
Portable
Printer
LTP3445
Mobile Printer
MTP series
MTP401
Measuring
Instrument
Amusement
MTP102
● Ultra small and light-weight
● High reliability
● Loading type
Standalone
Panel-Mount
Printer Unit
MTP201
STP series
Mobile Printer
Measuring
Instrument
● Paper width of 112mm
● Also powered by lithium-ion batteries.
● Maximum printing speed (450 dotlines/sec = 56.25mm/sec) when operating on 8.5V.
● Prints on two-ply thermal and label paper.
● Automatic paper loading.
Panel-Mount
Printer Unit
EFT/POS
CARD
Measuring
Instrument
PDA
Amusement
Panel-Mount
Standalone
Printer Unit
● Compact and light-weight
● High-quality and high reliability
● Individual motors for head moving and paper feeding.
● Quiet printing by stepping motor.
STP211-144
STP411-320
Standalone
Printer Unit
EFT/POS
Other Models
Line up
Other Models
Line up
Safety Precautions
Safety Precautions
Sub-assembled
Printer Unit
29
Sub-assembled
Printer Unit
STP312-256
24Volt
Low
Voltage
24Volt
Low Voltage
Low Voltage
24Volt
Serial
Printer
Serial Printer
Mobile Printer
Mobile Printer
Panel-Mount
Printer Unit
We are making positive efforts to respond to various environmental regulations including the RoHS Directive. We have
completed making all of our printers compliant with the RoHS Directive in May 2006.
From now on, we will properly maintain our compliance with the laws and regulations through continuous activities
of monitoring and measuring the controlled substances.
Standalone
Panel-Mount
Printer Unit
Our Efforts toward Environmental Regulations
[ Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment ]
Standalone
Printer Unit
This is a directive which the EU (European Union) set for the restriction of the use of certain hazardous substances in electrical and electronic device and equipment, and it
was issued in February 2003 together with the WEEE Directive. Accordingly, the directive has banned the use of the certain 6 substances in EU member nations since July
2006.
The WEEE Directive stands for:
Panel-Mount
Standalone
Printer Unit
The RoHS Directive stands for:
[ Waste Electrical and Electronic Equipment ]
Cadmium: 100ppm or less
PBB: 1000ppm or less
Mercury: 1000ppm or less
Hexavalent chromium: 1000ppm or less
PBDE: 1000ppm or less
Other Models
Line up
SAFETY PRECAUTIONS
Safety Precautions
1. This catalog provides a summary of product specifications. Before using
each product, please thoroughly read the technical manual, user's manual,
and other manuals which have been prepared by us.
2. The products listed in this catalog are not allowed to be used as part of any
life-support system or any other equipment or system which requires
extremely high reliability, without our permission in writing.
3. When using each product, thoroughly understand the specifications of the
produc t, obser ve the descriptions and markings for prevention and
avoidance of danger, on your products and in the documents such as the
manual, and advise and guide your customers (users).
GENERAL NOTES
1. Because of our continuous research for improvements, the contents in this
catalog may be changed without prior notice.
2. Since the photo of each product is printed, the color of the photo may be
different from that of the real product. Before use, please check the actual
color of the product.
3. Concerning the use of information, drawings, etc. in this catalog, we shall
not guarantee the industrial property, intellectual property, and other rights
of a third party or grant their licenses. Accordingly, we will not assume
responsibility for violation of the third party's rights attributable to such use.
4. No part of this catalog may be reprinted. reproduced or used for other
purposes without our written permission.
5. Warranty is limited to the product unit delivered. We will be exempted from
responsibility for any damage which may be caused by any defect of this
product.
Sub-assembled
Printer Unit
Lead: 1000ppm or less
Other Models
Line up
Judgement standards to comply with the 6 substances of RoHS requirements (Except for the exempted items):
Safety Precautions
Sub-assembled
Printer Unit
This is the EU (European Union) directive on waste electrical and electronic device and equipment, and it was issued in February 2003 together with the RoHS Directive.
30
05-08
http://www.seiko-instruments.de
Seiko Instruments GmbH
Siemensstrasse 9, D-63263 Neu-Isenburg, Germany
Telephone: +49-6102-297-0, Facsimile: +49-6102-297-320
E-mail: [email protected]
Seiko Instruments USA Inc.
All products shown on this document are complied with
requirements by ISO9001:2000 and manufactured under
quality management system by Bureau Veritas Japan.
2990 Lomita Blvd., Torrance, CA 90505, USA
Telephone: +1-310-517-7778, Facsimile: +49-310-517-8154
Headquarter
Seiko Instruments (H.K.) Ldt.
Print System Div.
8, Nakase 1-chome, Mihama-ku
Chiba-shi, Chiba 261-8507, Japan
Telephone: +81-43-211-1106, Facsimile: +81-43-211-8037
4-5 / F, Wyler Center 2, 200 Tai Lin Pai Road, Kwai Chung,
N.T., Kowloon, Hong Kong
Telephone: +852-2494-5160, Facsimile: +852-2424-0901
Seiko Instruments Inc.