May be the COOLEST new military product of 2016!

Transcription

May be the COOLEST new military product of 2016!
A2
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
Phones Open: Mon
- Fri, 8:30am –
5:00pm Showroom
Open: Monday Saturday, 10:00am
– 5:00pm, Friday
til 8:00pm
SARCO DOES IT AGAIN!
Double time it and get these
before they’re gone..... Everything present in this Kit to
make an AR15 type rifle except
for the Lower Receiver. All
parts included are a combination of USGI and commercial
new manufacture parts. Sling
and magazine are not included.
Buttstock supplied is the
telescoping 6 position M4 stock
with correct buffer and spring
and the 16" barrel is brand new
and has the front sight assy.
installed. We use the industry
standard hammer/trigger pin
with a diameter of .154": Most
Lower receivers use this size
pin although there are some Colt mfg. lower receivers that use .170" pins which are not
compatible with standard parts. The Upper Receiver is a flattop model and we offer it
with and without the carry handle/rear sight configuration.
A.KIT w/ Flat top upper rec. w/ carry handle and rear sight.......................$415.00,
3 for...............................................................$1230.00 AR150 (shown in picture)
B.KIT w/ Flat top upper rec. without carry handle & rear sight.................. $389.00,
3 for............................................................................................$1155.00 AR224
JOE GARABRANT BOOK
COLLECTION
NEW!
ITEM
We’ve got a tremendous military book collection! Check
out titles on E-Sarcoinc.com!
20" 5.56 AR-15 BARREL
NEW
AR15/M16 RIFLE PARTS
(non-firing display)
When is a spade not just a spade? When it’s a Mortar too! Sarco has the ‘Kamabee Keep’
rework of the coolest mortar design in the history of warfare. Innovative Russian designers took
the concept of the standard ‘Entrenching Tool’ that every soldier wore on his belt, and elevated
it to ‘Heavy Weapon Status’, by allowing it to dig trenches & also fire 37mm Mortar Rounds! Designed in the late 1930s and fielded against Finland in late 1939/40 in the Russo Finn War, and
throughout WW2 along the Russian Front.
Never been on the U.S. or World market! It can be attached to your belt using the canvas &
leather carrier, be detached to operate as a small shovel, or used to lob rounds on the enemy.
Transforms into a mortar in @15 seconds with practice. This is a new made replication of the
original and is non-firing. Sarco Inc. carries this item exclusively and they are currently in stock.
We also have the ‘late war’ style 15 round bandolier used by troops to carry mortar ammunition including Mosin Nagant Rifle ammunition. To top it off, we have replica 37mm Mortar inert
display rounds available too !
The only place to see this item in the entire world is in a Russian military museum. Truly this is
a piece of ordnance lost to history! The design concept was amazing and its impact could still be
amazing in this day & age! Imagine a platoon of infantry Riflemen also each carrying 15 mortar
shells and working as a fire and maneuver machine. Stalinist purges and a failure to develop better ammunition put this idea to sleep before its time!
37mm Spade Mortar Assembly...........................................$175.00
Belt Carrier for the Mortar.................................................. $19.95
Chest Bandolier w/ Mosin Pouch.......................................... $65.00
Mortar Round, inert for display........................................... $19.95
MISC458
MISC421
MISC429
MISC356
FORE
R BE
!!
NEVE
ABLE
AVAIL
NEW!
ITEM
JAPANESE MODEL 99 ARMORED SHIELD
Japanese WW2 issued steel shield as fielded in 1939 for Machine Gunners and also used by Arisaka
riflemen in defensive positions. Seen throughout the Pacific campaign and in China/Manchuria.
Several versions were developed, and these were primarily used by Type 96 and Type 99 machine
gunners, but riflemen also used them as was seen extensively throughout Guadalcanal. Shield has a
carrying handle and adjustable stability brace. Very few have made it back to the U.S. after the war,
but Sarco has had the shield reproduced from an original. A smart design and finally available for
military collectors! With some Kevlar laminates applied, this shield could make an excellent personal
combat shield for today’s combat operations. Sold as a collectible....................... $125.00 MISC443
!
New production in the white! Completely profiled
ITEM
and perfect for a retro or contemporary AR build!
This has the lean ‘pencil profile’ and is ready for the
installation of the front sight post & drilling of the gas hole. 1
in 12 twist, 5.56 cal., and made in the USA. $145.00 AR201
AM136 223 (5.56) Dummy Rounds from Lake City –
Original G.I. green tip......................10 for $8.95
AR098 AR Safety............................................... $10.95
AR100 AR15 Disconnector....................................$9.95
AR092 AR15 Hammer (Semi auto)..................... $15.00
AR001 AR15 Lower Receiver Parts Kit (SemiAuto)...................................................... $49.95
AR102 AR15 Trigger (Semi-Auto)....................... $17.95
AR082 AR15/M16 Action Spring..........................$4.00
AR120 AR15/M16 Action Spring (shorty style)......$4.00
AR032 AR15/M16 Barrel nut...............................$7.50
AR162 AR15/M16 Bipod Pouch New G.I. (nylon)
.................................................................$4.95
AR138
AR15/M16 Bipod with new canvas G.I. zipper
pouch with accessory pouch on side....... $13.50
AR137 AR15/M16 Bipod w/ O.D. Green Nylon pouch
.............................................................. $12.50
AR322 AR15/M16 Bipod w/o Pouch, used...........$9.95
AR060 AR15/M16 Bolt Cam Pin...........................$6.00
AR071 AR15/M16 Bolt Carrier Key.................... $13.50
AR070 AR15/M16 Bolt Carrier Key Screw............$1.00
AR106 AR15/M16 Bolt Catch...............................$7.50
AR105 AR15/M16 Bolt Catch Pin.........................$1.00
AR107 AR15/M16 Bolt Catch Plunger..................$7.50
AR108 AR15/M16 Bolt Catch Spring....................$1.00
AR057 AR15/M16 Bolt gas rings, set of 3.............$3.00
BRUSH-003 223 cal bore brushes, bronze 10 for
.................................................................$8.95
AR080 AR15/M16 Buffer .................................. $12.95
AR081 AR15/M16 Buffer Short......................... $12.95
May be the COOLEST new military product of 2016!
AR087 AR15/M16 Buffer Retainer........................$2.00
AR088 AR15/M16 Buffer Retainer Spring.............$1.00
AR306 AR15/M16 Buttstock hinged trapdoor assy
.................................................................$9.95
AR307 AR15/M16 Buttstock trapdoor hinge..........$4.00
AR119 AR15/M16 Butt Swivel A1/A2...................$4.00
AR056 AR15/M16 Butt Swivel Pin........................$1.00
AR118 AR15/M16 Butt Swivel Screw M16A2........$2.85
AR002 AR15/M16 Charging Handle assy........... $16.95
AR188 AR15/M16 Cleaning Toothbrush, G.I.
.......................................... $2.00, 3 for $3.75
AR164 AR15/M16 Comb. Wrench (Original G.I.)
.............................................................. $16.95
AR104 AR15/M16 Disconnector Spring................$1.00
AR178 AR15/M16 Early prong flash hider......... $12.50
AR036 AR15/M16 Ejection Port Cover..................$7.95
AR034 AR15/M16 Ejection Port Cover Snap ring
.................................................................$1.00
AR035
AR15/M16 Ejection Port Cover Spring......... $1.50
AR172 AR15/M16 Ejection port cover pin.............$2.75
AR067 AR15/M16 Ejector....................................$3.00
AR066 AR15/M16 Ejector Pin..............................$1.00
AR068 AR15/M16 Ejector Spring.........................$1.00
AR064 AR15/M16 Extractor.............................. $10.95
AR063 AR15/M16 Extractor Pin...........................$2.00
AR065 AR15/M16 Extractor Spring......................$1.00
AR059 AR15/M16 Firing Pin................................$7.95
AR058 AR15/M16 Firing Pin Retaining.................$2.00
AR410 AR15 Fixed stock that looks collapsible
.............................................................. $39.95
AR011 AR15/M16 Flash Hider Washer.................$1.00
AR049 AR15/M16 Forward Assist, Teardrop type
PROJECT BARRELS FOR THE RUGER® 10/22®
Sarco brings you a terrific selection of new barrels for your
Ruger® 10/22® firearms project. We offer 4 caliber selections.
In some cases, these barrels just need to be polished and crowned on the
muzzle end. A few will need other finishing touches. Compare at $99.00.
See notes below:
1. .17 caliber HM2 SS, 18 inches long 920 O.D. Ready to Go!.......................... $65.00 RGR007
2. .17 caliber HM2 4140, 24 inches long 920 O.D. needs to be polished and crowned
.................................................................................................................... $50.00 RGR008
3. .17 caliber HM2 SS, 20 inches long 920 O.D. needs to be polished and crowned
.................................................................................................................... $50.00 RGR010
4. .22 caliber Magnum, 4140, 24.5 inches long 920 O.D. needs to be polished and crowned
.................................................................................................................... $50.00 RGR003
5. .17 caliber HMR SS, 18.25 inches long 920 O.D. needs to be polished and crowned
.................................................................................................................... $50.00 RGR006
PLEASE NOTE: .17 HMR is for 10/22 Magnum rifles only! This is not a recommended conversion as
you would need a heavy bolt and heavy recoil spring. Chamber pressure is too great and is problematic in
semi autos. This is only for the advanced gun builder and when assembled, should be carefully checked
by a qualified gunsmith.
*****.17 HM2 REQUIRES USE OF A HEAVY BOLT.
*****.22 MAGNUM- REPLACEMENT FOR ORIGINAL GUNS ONLY. WILL NOT FIT THE 10/22 LONG RIFLE
REPLACEMENT BARREL FOR THE RUGER® 10-22® CHARGER PISTOL
Made by top US barrel mfg. 22LR, factory contoured and 10 1/2” long (muzzle is threaded for flashiders &
suppressors)....................................................................................................................$59.95 RGR012
.............................................................. $21.50
AR047 AR15/M16 Forward Assist Pin..................$1.00
AR048 AR15/M16 Forward Assist Spring.............$1.00
AR077 AR15/M16 Front and Rear Takedown Detent
Spring.......................................................$1.00
AR078
AR15/M16 Front and Rear Takedown Detent
.................................................................$1.00
AR079 AR15/M16 Front Pivot Pin........................$4.95
AR020 AR15/M16 Front Sight Detent...................$2.00
AR021 AR15/M16 Front Sight Detent Spring........$1.00
AR024 AR15/M16 Front Swivel Pin......................$1.00
AR023 AR15/M16 Front Swivel Rivet...................$1.00
AR029 AR15/M16 Gas Tube 16" (Shorty).......... $11.95
AR028 AR15/M16 Gas Tube 20" (Standard)...... $13.50
AR027 AR15/M16 Gas Tube Pin...........................$1.00
AR072 AR15/M16 Grip Screw & Washer..............$1.00
AR089 AR15/M16 Hammer Pin............................$1.50
AR093 AR15/M16 Hammer Spring.......................$2.00
AR275
M16/M16A1 Handguard, new Colt (Right)
.............................................................. $14.95
AR005 AR15/M16 Handguard (Right) Used $10.00
AR025 AR15/M16 Handguard Cap (Triangular)
.................................................................$6.95
AR033 AR15/M16 Handguard Slip Ring (G.I)........$7.50
AR030 AR15/M16 Handguard Snap Ring.............$2.50
AR031 AR15/M16 Handguard Spring...................$6.00
AR083
AR15/M16 Lower Receiver Extension..... $20.00
AR165 AR15/M16 Mag Carrier.............................$1.50
AR109
AR15/M16 Magazine Catch.......................$7.50
AR200 AR15/M16 Magazine Catch Assembly.... $10.00
AR177 AR15/M16 Magazine Catch Button, metal
.................................................................$2.50
AR111
AR15/M16 Magazine Catch Spring............$1.00
AR126 AR15/M16 Magazine Orlite (30 Round)
.....................................................$11.95 each,
AR163 AR15/M16 O.D. Web Case w/ Pouch...... $17.95
AR133 AR15/M16 Pin Kit.................................. $14.95
AR043
AR15/M16 Rear Sight Aperture, Standard
.................................................................$5.00
AR039 AR15/M16 Rear Sight Detent....................$2.00
AR040 AR15/M16 Rear Sight Detent Spring...........$1.00
AR038 AR15/M16 Rear Sight Drum.....................$6.50
AR037 AR15/M16 Rear Sight Drum Pin...............$1.00
AR046 AR15/M16 Rear Sight Spring....................$1.00
AR041 AR15/M16 Rear Sight Windage Screw.......$7.50
AR115 AR15/M16 Rear Takedown Pin..................$5.75
AR050 AR15/M16 Round Forward Assist.......... $14.75
AR130 AR15/M16 Rubberized Swivel front new.....$5.00
AR076 AR15/M16 Safety Detent...........................$2.00
AR075 AR15/M16 Safety Detent Spring...............$1.00
AR171 AR15/M16 Scope Mount Rings..................$6.95
AR095 AR15/M16 Sear Assembly...................... $20.00
AR116 AR15/M16 Sear Spring.............................$3.00
AR145 AR15/M16 Shorty Buttstock Assembly, high
strength fiberglass w/steel locking ring.. $29.95
AR134 AR15/M16 Spring Kit............................. $12.95
AR302 AR15/M16 Top sling adapter.....................$1.95
AR090 AR15/M16 Trigger Pin..............................$1.50
AR103 AR15/M16 Trigger Spring.........................$2.00
AR176 AR15/M16 Triggerguard, aluminum..........$6.75
AR112 AR15/M16 Triggerguard Pin.....................$1.00
AR006 AR15/M16A1 Birdcage Flash hider...........$6.95
AR085 AR15/M16A1 Buttcap Screw (Short).........$2.25
AR220 M16A1 Butt Swivel Screw..........................$3.00
M1A1 STOCK FOR RUGER® 10/22®
IN STOCK!
Hot off the wood mill, we’ve got the best stock to trick out your fine
10/22® rifle. Simply insert your barreled action into Sarco’s stock assy, and within
minutes you have a version of the 10/22® that closely resembles and handles like a U.S. Paratrooper
M1A1 Carbine! Comes complete with handguard and swivel band assy. Looks great, and with a folding
stock, you will benefit from the versatility of use and easy storage! Beautifully made hardwood stock,
handguard, and metal & leather folding stock assy, are sure to convince friends that you have a real .30
cal. M-1 Carbine. Makes one of the world’s best .22 rifles even better!........................... $149.95 STK380
SPECIAL OF THE MONTH! Take 20% Off Any Sarco Ruger 10/22 Stock Purchase
SARCO’S M-1 CARBINE STOCK CONVERSION FOR THE RUGER® 10/22®
Ruger® 10/22® rifles are a great platform for making all
sorts of custom hunting, target, and military configuration
Sarco Stock
rifles. We like it just the way it is, but now we have constructed a new way to enjoy this dependable firearm. Sarco,
Inc. has created the M-1 Carbine stock specifically made
This is what you don’t get.
Our stocks are authentic
to drop the 10/22® rifle into without any alteration! That’s
M1 Carbine.
right! No alterations! The front sling swivel is also properly
installed like the USGI M1 Carbine. Others stocks on the market do not have this accurate
feature. The wood grain/finish mimic the Tung Oiled finish of the Govt. Carbine stock. This
fine stock comes with matching wood handguard, steel buttplate, M1 Carbine front band,
M1 Carbine sling and oiler.......................................................................... $99.95 STK340
(This is a SARCO, INC. product for use with the 10/22®)
AR018 AR15/M16A1 Frong Sight Post..................$5.00
AR142
AR15/M16A1 G.I. Buttstock w/trap plus lower
receiver extension, buffer, & spring........ $59.95
AR073 AR15/M16A1 Pistol Grip (Used)............. $12.50
AR228 AR15/M16A1 Complete Rear Sight Set... $20.00
M16A1 Rear Sight Assy. Includes the correct A1 aperture.
Getting hard to find!............................... $19.95
AR157 AR15/M16A1 Sight Tool (5 Prong).............$4.95
AR214 AR15/M16A2 Burst Trigger.................... $15.00
AR143 AR15/M16A2 Buttstock Crnt Prod. Comes
with buffer, spring & all hrdwr milspec... $54.95
AR007 AR15/M16A2 Flash hider..........................$8.95
AR144 AR15/M16A2 New Buttstock (Current
production) stripped............................... $34.95
AR074 AR15/M16A2 Pistol Grip new....................$8.95
AR158 AR15/M16A2 Sight Tool (4 Prong).............$4.90
AR091 M16 Hammer......................................... $15.00
AR424 M16 Front Sight Base, Early.................. $23.75
AR127 M16 Magazine 6 Orlites w/ Carriers....... $59.95
AR317 M16 port firing gun safety plate – new G.I. in
package.................................................. $24.95
SLNG099 M16 Single Point Sling, BLACK............. $17.95
SLNG100 M16 Single Point Sling, GREEN............ $17.95
SLNG101 M16 Single Point Sling, SCORCHED DARK
EARTH................................................... $17.95
AR399 M16A2 Buttplate used good
......................................$3.95, 10 for $29.95
AR358 M16A2...... Peel off flash hider washers. Used take
off. Work fine.............................................$7.95
AR205 AR15/M16 chamber brush.......... 2 for $3.95
AR141 M16 Original G.I. Buttstock, plus lower receiver
extension, buffer and spring...............$59.95
12 GAUGE BLANK BARRELS
Terrific barrels for replacing shot out or troubled
shotgun barrels or that special project gun you
are working on.
BB009 - 12 gauge un chambered smooth bore 27
½ 1.062 OD 4140 steel..........................$19.95
BB010 - 12 gauge un chambered smooth bore 29
½ 1.312 OD 416ss..................................$29.95
BB011 - 12 gauge un chambered rifled bore 25½
1.312 od 4140 steel................................$44.95
BB012 - 12 gauge un chambered rifled bore 27 ½
1.312 od 416ss.......................................$44.95
JUST IN! BARREL BLANKS
FOR PROJECTS
BB013 - 9mm 1-10 twist 17" .980 od 4140 no
chamber.................................................$29.95
BB014 - 22 cal 1-9 twist 24 ½ .980 od 4140 no
chamber.................................................$29.95
BB015 - 30 cal 1-10 twist 18 ½ 1.312 od 416SS
no chamber............................................$29.95
SPECIAL for any barrel blanks in this box –
Buy 3, Take Off 5%
Buy 10, Take Off 10%
U.S. 1917 BROWNING M.G.
WATER CAN
B2
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
M4 16" COMPLETE BARRELED FLAT
TOP UPPER ASSEMBLIES
We have done
the hard work
for you. These
are fully assembled upper halves complete and ready to drop
on to your complete lower. All parts made in the
U.S.A.! Includes Flat Top Upper,
barrel assembly, complete bolt and carrier assembly, charging handle assembly, forward assist and
ejection port cover assembly......$359.00 AR013
Add ons: Kit with carry handle, rear sight assembly............................................ $389.00 AR014
Add ons: Lower parts kit and collapsible stock and
carry handle............................. $449.00 AR117
AR15 LOWER RECEIVER
PARTS SET
Super price! Includes all
parts shown except for the
receiver. Comes with late
model pistol grip and our
hammer & trigger pin diameter is the industry
standard at .154. Some Colt made guns use
a .170 diameter which is not compatible with
our parts. Compare our ‘Shocktober’ price!
................................................ $44.95 ea.
Or 3 for............................... $129.95 AR001
AR15 PISTOL CONVERSION, 9MM
UPPER BARRELED RECEIVER SET
Complete upper flat top
receiver w/bolt assy, mag block
& 20rd 9mm magazine ready to
add to your lower receiver. This
is for making the AR pistol and
it’s a hot commodity on the AR
circuit. Very limited number in
stock. All NFA rules apply
....................$595.00 AR421
(See our conversion set on page B)
*In areas with restricted magazine capacity, we
can sell you the kit and deduct $15.00 for the
magazine.
AR15/M16 UPPER
RECEIVER VISE BLOCKS
To securely hold your upper firmly
without damage to the upper or the
barrel on barrel installation. Will work
on any AR upper (receiver not included..
................................................ $29.95 AR-VICE
AR15 SLING PLATE (Metal) Single
point sling mount for collapsible
stock. AR mounts between lower
receiver. Quality steel construction. Use with our AR15 Single
Point Sling (LA032)..............$9.95 LA030
AR15/M16 CHAMBER BRUSH
Original style............................2 for $3.95 AR205
AR 16" BARREL GAS TUBES
Just got a shipment in. these have been tight
.................................................$11.95 AR029
M16 COMBINATION WRENCH
Late style tool for removing
flash hiders, barrel nut, and
buffer tube. Has cut out to
attach torque wrench or standard socket wrench. If you plan on removing the
barrel on your AR15/M16 you’ll need one of these
wrenches. Original G.I., New........... $16.95 AR164
COMPLETE BOLT CARRIER
ASSEMBLED
$125.00, M16 AR264 AR15 AR263
3 for $360.00
SPECIAL SALE!
$110.00, 3 for $299.00
IT’S A SALE ON SALE!!
$99.95, 3 for $285.00
AR15/M16 TEAR DROP FORWARD ASSIST
Available again! New, Few only $19.95 AR049
See our bayonet page G
for M16 (M7) bayonets
AR “MINI SCOPE” RISERS!
NEW!
ITEM
Well-made machined from
aircraft aluminum, this set
of black Picatinny risers
will let you add height to
your scope mounting on a flat-top AR or on
other guns where a Picatinny rail is mounted.
Each riser is 1-1/4" long , 3/4" in height. Fits
all Picatinny or Weaver rails! Finely made by
Bushmaster. $19.95 AR409
NEW!
ITEM
GERMAN MAXIM MG WATER CAN
Steel WWI
designed water
can used with
both the Maxim
08 and 08/15
NEW!
machine guns.
ITEM
Steel casing
with solid brass spigot and brass water
fill cap. Accurate copy of the original, but
stronger steel used and resists dents and
edge separation better than the original
.....................................$85.00 MISC440
Accurate new made steel water can
used by infantry . This is the infantry version with the raised edge on
the bottom to protect the drainage
plug. Very limited!
............................$90.00 A4275
COMPLETE UPPER KIT FOR OUR ARRETRACTABLE STOCK CARBINE
As shown to the
left all parts but
lower receiver
parts and buttstock assy parts
$365.00, 3
for $1079.00
AR335 This is the
flat top upper
with detachable
handle. PLEASE NOTE: Building an AR-15 requires
technical skills. Be sure you are qualified before
you build or seek a professional gunsmith.
AR15/M16 SPRING KIT
A set of all of the coil & torsion springs
in the AR15 or M16. Ideal item for your
spare parts box. Price if bought separately
$18.30 Kit Price only. Includes recoil
springs
Shortie M4 Kit....................$12.95 AR134
3 for............................................. $32.95
Standard Stock Kit .............$12.95 AR397
3 for............................................. $32.95
SUPER FIND!
AR 15 & AR 10 BARRELS –
Nearly Complete!
M16/AR15 EARLY
‘DUCKBILL’ FLASH HIDER
M4 stock set with handguards &
pistol grip............... $50.00 AR316
New M16A2 or M4 pistol grip
................................ $8.95 AR074
5.56MM/.223 BROKEN SHELL
EXTRACTOR
Brand new tool;
made for removing stuck headless cases
from the chamber of any .223/5.56mm
rifle. We’ve never seen these offered
before now..................BSE001 $5.95 ea.
Our new BSE’s work – others on
the market don’t fit. We learned
the hard way!
M16 ACCESSORY KIT - HEAVY DUTY
Cleaning toothbrush (GI)
Silent sling, Front sight tool
Muzzle cover, Magazine dust covers (6)
Combo wrench, Plastic mag carriers (4)
(Israeli G.I.), Broken shell extractor
Bipod, Cleaning rod, Stripper guide
2 Grenade launcher tension band (rare)
FLASH HIDERS
1.M16A1 $6.95 AR006
2.M16A2 $8.95 AR007
3.Early 3 prong type flash hider
$12.50 AR178 Not for sale in NJ
AR /M16 ARMORER'S KIT
Be ready when the time comes!
Quality tool set for removal &
installation of parts. Easily worth
the cost just for the quality vise
block set! INCLUDES - VISE
BLOCK, DELTA WRENCH, TOOL
BRUSH, GI COMBO TOOL, BROKEN SHELL
EXTRACTOR, BORE & CHAMBER BRUSHES, 1
SIGHT TOOL, CLEANING ROD SET $91.50 value
for just AR373 $59.95
.233 CAL BORE BRUSHS
bronze 10 for $8.95 BRUSH-003
OUR LATEST BUY – GREAT DEALS 9MM
(x19) PARABELLUM & PISTOL
BARRELS (10½")
For Your 9mm AR Project
-9mm AR Pistol and Carbine
barrels. We just bought an over run of 9mm barrels in 10 ½" and 16" lengths. Barrels are 1-14
twist and fully machined and chambered. These
barrels are in the white and ready to take the
finish of your choice. These have threaded muzzles
(1½" x 36 thread). These are made by a prime barrel maker. What a deal!! List on these barrels from
the source is $170-$180! 10½" AR332
Originally $99.95, $64.95, 3 pcs/$179.95,
10 pcs/$575.00
NEW!
ITEM
BROWNING 1919A4 250 RD.
PEDESTAL AMMO CAN
Steel pedestal can
designed to attach
directly to the 1919A4
Machine Gun by way of
the left belt holding pawl
bracket. Used throughout WW2 and common
NEW!
ITEM
on Jeep pedestal mounts.
Accurately made in steel.
..................................$65.00 A4282
AR15/M16 CLEANING KIT
& ACCESSORY KIT
• Chamber brush
• Broken shell
extractor
• Stripper clip guide
• Grenade launcher
Tension band
$17.50, 3 for $49.95 AR240
AR-15 DUAL FRONT SIGHT TOOL
Two-in-One tool with dual functions to adjust
both 4-prong and 5-prong front sights. Makes
adjusting the front sight on your A1 and A2 a
snap. $5.95, 3 for $14.95 AR175
AR15 LONG FLASH HIDER FOR M4 CARBINES
51/2" long screws on like the short one
Not for sale
in NJ
with slots $19.95 AR213
with holes $19.95 AR212
AR15 & M16 MAGS
Orlites & Orig Colt & others – See
our e-sarcoinc.com for sales on these
items
NEW M16A2 ROUND HANDGUARD
SETS MILITARY PRODUCTION
Shortie length
w/liner $14.95 AR185
AR SHORTY BUTTSTOCK INSTALLATION
WRENCH
$2.95 Free Bonus –
other end of wrench fits
the 1911 barrel bushing TOOL031
JUST GOT IN 1000 AR BOLT
CARRIERS
Can sell at old time
prices… $49.95 AR069
M16 STOCK (Early Model)
Complete with rubber buttplate
and swivel assy. This is the
early ‘Vietnam’ era stock without trap door. No cracks! Looks
great..............$34.95 AR140
M16
PIN KIT
Front swivel, gas tube, rear sight drum, forward
assist, butt swivel, firing pin retaining, extractor,
ejector, front pivot, rear takedown, hammer, trigger,
bolt catch, trigger guard, ejection port cover.$14.95
3 for.................................................$39.95 AR133
M4 AR15/M16 RECEIVER CARRYING
HANDLE AND REAR SIGHT ASSEMBLY
DESIRABLE 6.8MM SPC AR15 BARRELS
6.8mm SPC AR15 Barrels – We were lucky to get
this over run of AR barrels in 6.8 SPC. These are
16" heavy barrels and are complete with barrel
extension. Gas port needs to be drilled before
receiving your .750" diameter gas block or sight
base. 1 in 10 twist. Headspaced and ready to go.
Threaded muzzle...........................$75.00 AR388
10 for...................................................$650.00
SPECIAL SALE ON
UPPERS! BEST PRICE EVER!
WE GOT A GOOD BUY!!
AR FLAT TOP A4 UPPERS
Many choices to suit your needs.
A: Stripped flat top upper....... $48.95 AR196
B: Stripped Flat Top Upper with our complete
A-4 carrying handle assy. (includes complete
A2 rear sight assy).................$74.95 AR202
C: Stripped flat top upper with M4 carry
handle assy and also ejection port cover assy
and forward assist assy.......... $94.95 AR204
AR-15 TAPCO INTRAFUSE HANDGUARD SET
Value $83.50
Sarco Special Price $36.95 AR238
• Bore brush
• Cleaning rod
• Tooth brush
•Oiler
• Muzzle cap
• Dual front sight tool
9MM AR-15 CONVERSION SET
Consists of a complete upper flat top
barreled receiver with a rail gas block in
place of the front sight, custom flash hider, mag well adapter and 30 rd. magazine.
(Deduct $15 from kit if you live in a state
where you cannot have the magazine).
Flash hider is permanently attached to
the barrel. Made in the USA
$595.00 AR395
(See Hi Cap Mag restrictions on page O)
NEW!
ITEM
Early U.S. Advisors & Air Force ‘Model
01’ flash hiders originally issued with
the guns starting in 1963. These
were succeeded by the standard GI
‘prong’ flash hider & later in 1969 by the ‘birdcage’
model. New mfg
.....................................................$25.00 AR423
AR15 ACCESSORIES
Cleaning rod 4 pc. CLN030............................ $6.95
Muzzle Cap (plastic) AR192..... $1.50, 3 for $2.75
Stripper clip guide STC005............................. $1.50
Magazine dust covers AR199................. 3 for $2.00
M16 G.I. cleaning “toothbrush” orig. G.I. issue.
AR188.....................................$2.00, 3 for $3.75
SPECIAL - one each of all 5 items above.
AR321........................................................... $8.95
M16A2 PEEL OFF FLASH HIDER WASHERS
AR358...................................$7.95, 3 for $18.95
AR DELTA RING REMOVAL TOOL Makes handguard
removal simple AR326................................... $8.95
Steel can attaches
directly to the
standard 1919A4
MG left belt holding
pawl bracket on
the gun and affords
use on the M2
NEW!
tripod or on pedestal
ITEM
mounts. Best Price
on the market ….. from the ones who
invented it! ................$52.00 A4283
AR15 AND M16 PARTS AND ACCESSORIES
We found a “few” M16 G.I. slings, new – in
their original Colt marked bag, sealed – Great
for Colt or M16 collectors.... $14.95 SLNG092
Produced by a major U.S. barrel manufacturer, barrels
are threaded for AR barrel extensions and are fully
chambered. Plenty of barrel remaining for custom
projects! We purchased these at a considerable savings
and we can pass this onto you. Priced individually
or purchase 10 pcs. and take 10% off ! We have the
following 2 categories of barrels: These strait contour
barrels are threaded for AR barrel extensions and are
fully chambered but do not have any other profile
machining done.
BB016 300 blackout threaded for ext .980 strait
contour 16½ 1-8 twist 4140
chambered......................................... $65.00
BB022 300 blackout threaded for ext .980
strait contour 8½ 1-8 twist 4140
chambered......................................... $55.00
BB023 308 win threaded for AR10 ext 1.190
strait contour 16½" 1-10 twist 416ss
chambered......................................... $75.00
BB024 6.5 Grendel threaded .980 strait
contour 18½ 1-9 twist 416ss
chambered......................................... $45.00
BB026 6x45 threaded for ext .980 strait
contour 16" 1-10 twist 4140
chambered......................................... $55.00
These are fully profiled barrels ready for your barrel
extension and front sight base.
BB020 5.56 threaded for ext M4 profile 10½
1-9 twist no gas port 4140 1/2x36
muzzle chambered............................. $39.95
BB021 6.8spc threaded for ext M4 profile
16" 1-10 twist no gas port 4140
chambered......................................... $29.95
BB017 7.62x39 threaded for ext M4 profile
16" 1-10 twist no gas port 416ss ½-36
muzzle chambered............................ $45.00
BB018 6.8spc threaded for ext HB profile 20"
1-10 twist no gas port 4140 5/8 -24
muzzle chambered............................. $29.95
BB019 6.8spc threaded for ext HB profile 16"
1-10 twist no gas port 416ss 5/8-24
muzzle chambered............................. $29.95
BB025 6.5 Grendel threaded HB profile 18"
1-9 twist no gas port 416ss 5/8-24
muzzle chambered............................. $55.00
BB027 6x45 threaded for ext HB profile 16"
1-10 twist no gas port ½ -28 muzzle
4140 chambered.............................. $60.00
BROWNING 100 rd. AMMO. CAN
New sporting design
makes these 6.5" handguards with 3 accessory
rail covers, a convenient
change of variety for your
M4 style rifle. Color: black
$29.95 AR420
Fits Flat Top Upper reciever with Picatinny Rail.
Complete with M16A2
rear sight assembly.
AR180
SPECIAL SALE!
$29.95,
3 for $84.95
M16 AUTO SEAR
Orig U.S. G.I. exc cond. Few only
..........................$19.95 AR095
Buy a replacement(s) for your
legal M16. All NFA rules apply.
Note: These go out of time with use.
AR-15 LOW PROFILE RUBBER RAIL
COVERS
Rubber composite rail
guards slip on quickly
to both protect unused
Rails and comfort
your hand grip. 6-7/8
inches long, they can be trimmed to size
as needed. Two colors available:
Black rail cover...................$3.75 LA017
Green rail cover................$3.75 LA017G
4 Rail Covers for... $9.95 (mix or match)
M16 BOLT CARRIERS
Just Came In The Door!!.......... $65.00
3 for........................... $180.00 AR229
SPECIAL SALE!
$49.95, 3 for $139.95
ORIGINAL U.S. AIRFORCE .22
LONG RIFLE CONVERSION UNIT
Factoid: 27 years ago this
month, The Soviets pulled out of
their 9 year war in Afghanistan.
for more M16 with Teflon magazine-1 or 2
only! Super Rare........... $350.00 AR425
ORIGINAL G.I. M16 RIFLE SLINGS
In their original packaging..$8.95,
3 for
$24.95 SLNG087
EXTRA MAGAZINES FOR THE G.I. M261 .22LR
CONVERSION UNIT FOR THE AR15
$24.95 ea. M26120
This is the end of these Send $1.00 for
complete list of our M261 parts (M26122) M261
manual (few only) - $4.95 M26121
See e-sarcoinc.com for a spare parts put-away kit for
the M261 kit
*****Original USGI*****
EARLY VIETNAM ERA M-16 STOCK SETS &
TRIANGULAR HANDGUARDS
1. Early Stock without trap door and with rubber
buttplate; good condition / no cracks
................................................ $35.00 AR146
2. Original M16 Pistol Grip..............$9.95 AR364
3. Original Triangular Hand Guard Set
................................................ $35.00 AR318
4. Set of early stock, triangular hand guard set,
and early pistol grip. Good condition, no cracks.
................................................ $69.95 AR255
M16-A1 STOCK SET
5.
6.
Original M16A1 stock with buttplate & swivel
................................................ $37.50 AR411
Complete set of M16A1 stock, triangular
handguards and pistol grip...... $ 69.95 AR412
COLLAPSIBLE AR-15 CARBINE STOCK
$34.95 3 FOR $94.50 AR145
• Six Positions • Precision machined Parts for
Maximum Strength • Super Quality Aluminum
Buffer • Includes complete stock assembly w/ buffer & recoil spring.
• Reinforced grids Black (AR145)
HIGH QUALITY AR/M4 CARBINE LENGTH
QUAD RAIL HG SYSTEM
$38.95 AR384
Other sell for up to $150.00 or more
M203 GRENADE LAUNCHER SIGHT
Standard style, mounts off of
left side of carry handle with
sight increments from 50 to
400 meters. Exc. Condition.
...............$25.00 M203007
ORIG. G.I. M16 BIPODS
New G.I. bipod in wrap AR139........................$14.95
Used exc G.I. bipod AR322................................ $9.95
New nylon G.I. pouch AR162............................ $4.95
SIGHT ADJUSTING TOOL
“Old style” AR15/M16 for round front sight
..............................................$4.95 ea. AR157
BACK IN STOCK!!
AR15/M16A2 SIGHT ADJUSTING TOOL 4
PRONG......................................... $4.90 AR158
K2
NEW!!! M14 BARRELS
IN STOCK
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
Note: See our 1st of the
month ad or our E-com
site for M-14 Magazines.
M14 PARTS & ACCESSORIES
ORIGINAL G.I. TRW M14
RECOIL SPRINGS
Also work of course in all
semi autos. Just in the door..
$7.45,
5/..........................$29.95,
10/............ $49.95 M14052
NM SIGHT & APERTURE BUYERS
PLEASE NOTE:
The aperture is made oversized to be
fit to your sight base. The procedure
is simple & instructions are included.
See our website for the instructions
if you wish.
National Match Rear
Sight Aperature
Your choice of .520 or
.595 diameter
$39.95 M14127
7.62MM BROKEN SHELL
EXTRACTOR
NEW!
ITEM
Brand new .308 cal M14 Barrels made by
one of the best U.S. barrel
manufacturers $175.00 ea. M14124
NEW G.I. SPEC M14 & M14A
BOLTS WITH ROLLER
These are New production Rockola forged bolts
to original GI blueprint and heat treat.
8620 H Steel/#719-0185 GI print.
Heat treat spec A-Z-2M47512. Fully
Military compliant part check the TALK
boards....$175.00 M14155 (ORDER
EARLY THESE WILL FLY OUT)
M14 FLASH HIDER PLIERS
Available once again. New condition.
A necessity for your M14 ensemble
$16.50 ea. TOOL039
M14 STRIPPER CLIPS
7 original clips for $9.95 STC016
M14 FLASH HIDERS W/BAYO LUG
In stock again! New Production
$29.50 M14079
ORIGINAL G.I. M14
BUTTPLATE SETS
$5.95 BSE002
Complete buttplate & the 2 screws
........................................$24.95 M14143
M14/M1A SIGHT
PROTECTORS
M14 7.62 NATO CHAMBER BRUSHES
Military style plastic snap-on
covers to protect the front and
rear sights and the flash hider
muzzle of the M14/M1A rifle.
New. $6.50, 3 for $17.95
M14022
U.S. Army
Design
M14 RIFLE CLEANING KIT
Kit consists of following items:
G.I. sectional
cleaning rod,Rod
handle/
combination tool
Ratchet chamber
brush, .30 cal. bore brush
G.I. carrying pouch $12.50
3 for $29.95 CLN070
M-14 MILITARY
MAGAZINE POUCH
Original Vietnam era
design as used by
a U.S. ally. Holds 2
M14 Magazines and
can hold 2 grenades
in side slots. Also
has a belt loop on back for fastening.
Very good condition. Pouch only
................................ $9.95 M14020
M14 SPECIAL ITEMS
1. M14 gas cylinder (Chinese)........$29.95 M14108
2. G.I. M14 connector rod.............. $14.95 M14049
.........................................................3/$36.50
3. G.I. front stock swivel set, new.....$8.95 M14117
4. National Match front swivel....................$23.75
5. M14 E2 stock liner set (front grip mounting
kit) G.I. new in package contains liner Grip
hinge base, screws & plugs
..................................................... $64.50 M14113
6. New bolt rollers.......................... $4.95 ea M14060
7. M14 bolt with roller, new............. $175.00 M14155
9. M14 bolt roller with retaining clip.....$7.95 M14352
10. M14 bolt roller retaining clip.............. 3.95 M14158
See our website for other M14 parts
Found a few more...
M14 G.I. “SPOTTY BOLTS”
Out of parade rifles – Spot weld in firing
pin hole and rear – last of the 1000 we
had. $39.95 M14147 While the few last
G.I. ratchet chamber
brush originally made
for use with the M14
rifle, but will work just as well in most 7.62mm
NATO rifles, new.................................. $2.95
or 3 for................................... $6.95 M14016
DELUXE M14/M1A
SNIPER SCOPE MOUNT
This M14/M1A Tactical Scope Mount with 3 Point
locking, mounts easily to the charger guide Dovetail
and Receiver mount lug. It also has open sight channel
that lets you use your iron sights. The top feature of
this mount is that it has a rigid 3 point mounting for
both rigidity of the scope system plus maintenance
of Zero. Special Value $24.95, 3 for $69.95 M14012
Rings ...................................................$4.95 SCP007
Set of rings & mount.....................................$27.95,
3 for.................................................$79.95 M14010
M14 ORIG G.I. FLASH HIDERS
Found a few only!...$89.95 M14157
ORIGINAL WW2 ERA GARAND STOCK W/ MARKINGS
Finally found some original USGI stocks with good cartouche markings from the
manufacturers. The stocks have original markings and although the stocks have some
dings and dents, nothing major and in good general condition. May be your last chance
to obtain original marked stocks. We have the following markings available. We have
posted the serial number range for you to check against your rifle’s serial number.
GRD342 GRD343 GRD344
GRD341 S.A. S.A. S.A. S.A.
G.A. W. E.McF. J.L.G. N.F.R.
#1,860,001- #700,001- #4,200,000- #3,200,0013,200,000 1,860,000 4,350,000 3,890,000
$295.00 $295.00 $295.00 $395.00 (few)
****Note: Add $25 Per stock for special selection of best available.
Also have a supply of standard unmarked M1 Garand stocks: Same general condi­tion
as our marked stocks, but without markings. Stocks will have some dings and minor
dents. Good condition $80.00 GRD024, Average condition $60.00 GRD027
Brand New…. M1
GARAND BARRELS…
Brand New
.30-06 and .308 caliber
barrels in stock !
Newly manufactured barrels ready to install
on your M1 Garand Receiver. Made by one of
the premier barrel manufacturers in the USA,
these .30-06 caliber barrels and .308 barrels
are manufactured from 4140 steel with 4 groove
rifling and a 1 in 10 twist. Beautiful high quality parkerized replacement barrels. Because
they are made here in the US, they do not have
the ungainly import barrel markings. A great
chance to get rid of that ‘Blue Sky’ or other
import marked barrel and also restore accuracy!
Barrels should always be installed by a qualified
gunsmith.
.30-06................................. $149.95 GRD157
.308..................................... $149.95 GRD158
Mix or Match 3/.................. $429.95 GRD337
Please specify when ordering
M1 GARAND KITS
Almost sold out! All parts but barrel &
receiver, and op rod catch & clip latch.
Good condition & serviceable. Some
parts are new. G.I. walnut handguards
included. G.I. walnut stock. Gathered a
few more......................$580.00 GRD331
Also have a selected kit – metal parts are
personally selected – wood is same as
above......................... $610.00 GRD332
All parts but receiver and op rod catch & clip latch
– for 7.62 NATO – Stock is exc to new, barrel is
rechambered in 7.62 NATO by shortening a G.I. barrel, G.I. handguards are new walnut, system is 1/2"
shorter due to NATO Round. Note: These are chambered for 7.62 NATO +.308. The NATO is a slightly
deeper chamber. Small lot $580.00 GRD333 Hand
select $610.00 GRD334
when you purchase one of our Garand kits
(Barrels (GRD157) are regularly $159.95)
M1D GARAND SNIPER RIFLE KIT
A $942.00
Value !
A REALIZED DREAM FOR SARCO & OUR
VALUED CUSTOMERS!
Convert your M1 Garand into a military
grade M1D Sniper Rifle or build your own
M1D with our M1D Garand kit which
includes a new M1D Barrel with mounted
scope Block, Scope ring mount, T37 flash
hider, M84 scope with rubber eye piece,
Handguard, and leather Cheekpiece. Everything you need, to make the sniper rifle
you’ve always wanted. We also include an
original M84 data plate for the scope.
Bound to satisfy you on the range and
increase the value of your rifle too! These parts are normally quite expensive on their own! Barrels
are short chambered as per military specs, so make sure a Gunsmith checks the final assembly. Very
limited quantity in stock now....................................................................................$649.95 GRD335
Complete kit at an unbelievable price!
Selector, Pin & Spring
Selector Shaft
Sear Release
Connector Rod Full Auto
Selector Lock...............$39.95 M14014
WORLD WAR I & WORLD
WAR II PATTERN U.S.
LEATHER RIFLE SLINGS
These beautiful recreations of the old style leather
slings are made to the standard U.S. M1907pattern, as used on all the U.S. military rifles since
the turn of the century. These are the proper
slings for use on all of the following arms:
M1903 Springfields
M1 Garand
M16
M1917 “Enfields”
Military “Trench” Shotguns
M14
Made from good quality leather with brass or
steel hardware, and marked with proper style
WWI or WWII markings and dates; these slings
will enhance that special old rifle in your collection. Specify when ordering:
1. WWI Model 1907 Sling (w/brass hardware and
WWI date)........................................... SLNG024
2. WWII Model 1907 Sling (w/steel hardware and
WWII date) SLNG025
.......................... $16.95 ea., 3 for $47.95
USGI M14 STOCK ASSEMBLY
Very good condition M14 walnut
stocks with buttplate assembly
with shoulder rest and sling mounts. Can still see the
National Defense cartouche marking. Some minor dings & blemishes,
but overall highly serviceable and the best we’ve had in years!
....................................................................................... $75.00 M14354
FRONT HALF G.I. M1
GARAND RECEIVER
$14.95, 3 for $39.95 GRD143
Neat paper weight!
M1D BARREL WITH MOUNTED
SCOPE BLOCK
Just in, new M1D Garand barrel ready to
install and mount your scope
........................................ $249.00 GRD159
(the base for the barrel) fully
machined from solid billet – 100%
like the original and to the G.I print
$89.95 GRD316 Investment cast M1D barrel
block $59.95 GRD113
M1 GARAND CLIPS
Current Production
By U.S. Government Contractor - GRD275
5 for....................................................... $9.95
10 for...................................................$14.95
20 for...................................................$24.95
40 for...................................................$45.00
Nice fresh spring tension in your clip
SPECIAL GARAND CLIPS
1.2 round clip for match shooters.....$8.00 ea,
5 for........................................ $24.95 GRD131
2.5 round hunting clips
................... $8.00 ea, 5 for $24.95 GRD130
COMBO. New Style M3A1
TOOLS WITH
CHAMBER BRUSH
The Latest and best.
A. Used G.I.................... $19.95 GRD134
B. Like new tool w/new brush
................................. $24.95 GRD138
C. Absolutely New G.I. WWII original tool
in orig G.I. grease & package (no brush)
.................................. $29.95 GRD165
USM82 SNIPER SCOPES FOR
THE M1C & M1D & 1903A4
SPRINGFIELD, WWII &
KOREAN WAR SNIPER RIFLES
AVAILABLE AGAIN M14
FULL AUTO PARTS KITS
M14
M14
M14
M14
M14
More on
page D
NEW ITEM!! M1D BARREL BLOCK
7.62 NATO (.308) M1 GARAND KIT
ADD A NEW .30-06 BARREL FOR $130.00
US Made by old
school barrel maker
M1
GARAND
M1 TANKER GARAND .30-06 BARREL - HAVEN’T BEEN AVAILABLE FOR YEARS!
Brand new and made by one of America's premier barrel manufacturers. Parkerized and
ready to install. Length 18.25 inches. .30-06........................................$129.95 GRD004
.308......................................................................................................$129.95 GRD336
Specify when ordering
M1 GARAND ACCESSORY PACK
Terrific set of accessories for the Shooter
or Reenactor! Made up of both original
and reproduction items, the Pack
includes the following items:
NEW!
GARAND GUN CASE
GARAND CARTRIDGE BELT
MILITARY MANUAL
M10 CLEANING SET w/brush
CHAMBER BRUSH
SNIPER CHEEK PAD
1 QUART OF LSA - MILITARY GUN
LUBRICANT
CLEANING ROD STOP
USGI DUMMY .30 RD
3 EN-BLOC STRIPPER CLIPS
M15 G.L. SGT.CASE
PULL THRU ROD &
CORD
ITEM
COLLECTOR GARAND PARTS:
Winchester, HRA hammer GRD231
...............................................$40.00
HRA gas cylinder lock screw GRD236
...............................................$30.00
HRA windage knob GRD237.........$35.00
HRA safety GRD238.....................$40.00
Win. Trigger housing reparked Stripped
GRD152....................................$65.00
Milled stock ferrule w/swivel GRD174
...............................................$40.00
Bullet guide, post war stamped GRD248
...............................................$10.00
Bullet guide, post war stamped with
thumb notch GRD249...............$15.00
ALSO: Your choice of
1907 Leather Sling or
Canvas WW2 style sling.
Specify when ordering.
A Retail Value of over
$145.00 For Just…
$79.95 GRD329
***A great gift for a
Garand owner!***
GARAND BROKEN SHELL EXTRACTORS
Dual use for .308 (7.62x51) and .30-06................................................... $5.95 BSE013
Beautiful exact repro with original markings for the Griffin & Howe M1C mount
or the M1D scope mount. See info below
............... $399.00 $499.00 SCP040
7/8" diameter tube, crystal clear optics,
tapered post reticle, polished blued finish, sliding sun-shade and a rubber eye
cup. All of the major components are
stamped with military part numbers and
the tube is stamped with period serial
numbers and stock numbers. Each scope
comes factory set to zero/300 yards.
Note: We have been able to reduce the
price of our M82 scope by $100.00
M1 GARAND BLANK ADAPTER
GRD126 U.S. G.I. pattern, new..... $7.95
3 for.........................................$21.95
GRD161 NATO pattern................. $5.95
5 for.........................................$24.95
For bulk pricing on Garand BFA’s call
Mark, Dave or Cholly
LATE T-37 M1 GARAND SNIPER
FLASH HIDER
$34.50 GRD111
MI GARAND CLEANING KIT
Kit contains M10 cleaning rod, bore
brush and a G.I. carrying pouch. CLN064
$17.49 3 for $49.50
Handle for M10 cleaning
Rod for Garand Rifle –
hard to find $7.95,
3 for $22.50 CLN047
Orig G.I. M10 handles
..........$9.95 GRD281
D2
M1 GARAND PARTS
& ACCESSORIES
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
NEW!
ITEM
LATE PLASTIC WWII OILER—G.I.
NEW $13.95 Few Only OIL035
ORIGINAL G.I. M1 GARAND BOLTS
Stripped........................ $69.95 GRD070
Complete....................... $89.95 GRD071
M1 GARAND & M1 CARBINE GRENADE
LAUNCHER SIGHT with pouch. Orig G.I.,
brand new.......................$9.95 MISC062
G.I. Sight pouch only.......$3.95 MISC262
G.I. Mounting jig for installing base to
gun – rare, original....... $40.00 MISC263
WWII M1 GARAND RIFLE
LEATHER SCABBARD
These leather scabbards were used by horse
cavalrymen and truck and jeep drivers.
These heavy leather scabbards have the
tunnel to cover the operating rod handle
and two leather carrying straps with brass
hardware. Perfect reproduction.
SALE $59.95 each
GRD137
Original G.I. new sling keepers for
Springfield and Garand 1907 leather
slings – buried for years. $5.95 ea,
2 for $9.95 SLNG067
Available Again –
Ratchet chamber
brushes for the
M1 Garand......................$4.95,
3 for............................... $9.95
.30-06 cal TOOL044
LAST OF THE NEW ORIGINAL G.I. M1 GARAND
BUTTPLATES
These have
been sleeping in
our warehouse for 20 or 30 years.
Absolutely brand new unissued.
These are from a U.S. Government
contractor buy out years ago. This
is probably your last chance to get
a new original G.I. buttplate. When
these are gone, that’s it! Limited
numbers available
.......................... $39.95 GRD326
1.
2.
3.
4.
M1C/M1D SNIPER PARTS
M1D rear handguard New G.I. original
GRD033................................................. $25.00
T37 flash hider GRD111......................... $34.50
M1D barrel block GRD113...................... $59.95
M1D scope mount GRD112.................... $47.50
WWII U.S. PATTERN CLEANING ROD CASES
WITH WWII STYLE BELT HOOKS
These are nice as they have leather straps
ing – new – show some storage
For M1 Carbine rod................... $12.50
For M1 Garand rod.................... $12.50
Special – 1 of each..................... $21.95
& edgCLN117
CLN118
CLN119
ORIG WWII G.I. M1 GARAND KHAKI
CLEANING ROD POUCH
New cond. Few only WWII markings.
Found in warehouse $14.95 GRD299
PARTS FOR .308 (7.62x51) CAL M1
GARAND ORIGINAL .308 STOCK
New and like new............................................. $59.95
3 for................................................. $149.95 GRD028
Front and rear handguard set, new......$37.50 GRD274
See our K Page for more
Garand parts
Orig. Brass oil & throng set, exc. condition.
OIL015 ............................................$35.00
Orig plastic oil & throng set, used exc.
condition OIL016 ............................... $8.50
•
•
•
•
•
•
•
•
•
GARAND ACCESSORY KIT
Perfect new leather sling
Orig. late oiler
Orig. combat cleaning throw
Cleaning brush
Front & rear sight cover
10 – 8 shot clips
Orig. WWII accessory pouch
Cleaning rod buffer
G.I. type carrying case
$70.00 value $49.95 GRD172
GARAND SNIPER LEATHER CHEEKPAD
Special new low price. GRD124
Exact repro with proper markings
$18.95 3 for $49.95
Go to our websites for a complete selection of Garand bolts by maker and dash
variation. We have sorted out 13 variations – we even offer heat treat lots for
serious collectors.
COMPLETE SET OF M1
GARAND STOCK HARDWARE
All cleaned up and reparkerized. Buttplate
w/screws, rear swivel, stock ferrule &
swivel assy $39.95 GRD136
Hardware Set same as above but Not
reparkerized… $33.50 GRD213
SPECIAL M1D SNIPER COMBO SET
New G.I. Handguard
T-37 Flash hider
Cheek Pad
Barrel Block
Scope Mount
Value $200.00. GRD145 SPECIAL $149.50
Scope mounts for the M1D Garand
Sniper rifle. These are for the 7/8" diameter
M81 - M82 - M84 Scope. New condition.
GRD112
BRAND NEW GARAND STOCK & HANDGUARD SETS IN WALNUT
The stocks are new walnut G.I. stocks that were .308 cal & we converted them to .3006. Fit is perfect for .30-06. There is a tiny hairline from the conversion that is visible.
Handguards are new production walnut.
Complete stock set (wood only)............................ $59.95, 3 for $169.95 GRD278
Quantity purchases, please call Cholly. Will trade on quantities
GARAND PARTS
GRD330
rust
GRD002
GRD001
GRD071
GRD070
Barrel G.I. Orig WWII Dated, poor bore & some
$49.95
Barrel “Clunker Grade”..........................$20.00
Barrel (Used, Fair)..................................$34.95
Bolt (Complete)......................................$89.95
Bolt (Stripped Used)...............................$69.95
See our website for a complete
offering of Collector Garand bolts
BRUSH-001 Bronze bore brush 30 cal................. 10/$9.95
GRD065 Bullet Guide............................................ $7.50
GRD046 Butt Swivel.............................................. $7.50
GRD042 Buttplate Good to VG, G.I. (Used)...........$22.50
GRD043 Buttplate Screw Bottom (Long)................. $2.25
GRD044 Buttplate Screw Upper (Small)................. $1.50
GRD318 Buttplate w/trap assy G.I. exc to like new.$30.00
GRD319 Buttplate w/trap assy G.I. fair to poor....$15.00
GRD320 Buttplate w/trap assy G.I. new..............$29.95
GRD115 Carrying Case........................................$14.95
GRD021 Clip Ejector.............................................. $4.95
GRD081 Clip Latch..............................................$24.50
GRD082 Clip Latch Pin.......................................... $2.00
GRD083 Clip Latch Spring..................................... $1.35
GRD214 Danish contract Garand oiler
............................................. $3.70, 3 for $8.95
GRD259 Early Rear sight windage knob spring...... $3.00
GRD076 Ejector..................................................... $3.25
GRD077 Ejector Spring.......................................... $1.50
GRD078 Ejector w/ Spring..................................... $4.95
GRD086 Elevation Pinion (Late Style)...................$26.50
GRD075 Extractor-current production.................$15.95
GRD310 Extractor G.I. new................................ $20.00
GRD079 Extractor Spring w/ Plunger.................... $3.45
GRD074 Firing Pin...............................................$15.00
GRD186 Flash hider lock bracket G.I. M2............$25.00
GRD111 Flashider T-37 (Pronged)........................$34.50
GRD062 Follower Arm.........................................$15.00
GRD064 Follower Arm Pin..................................... $2.45
GRD068 follower assy..........................................$19.95
GRD061 Follower Rod............................................ $7.00
GRD066 Follower Slide........................................$12.00
GRD294 Front handguard with metal G.I. good cond.
..............................................................$24.95
GRD295 Front handguard w/metal G.I. VG cond.$29.95
GRD109 Front Sight............................................$12.00
GRD110 Front Sight Screw.................................... $1.25
GRD096 Gas Cylinder (Serviceable)......................$85.00
GRD097 Gas Cylinder (Refinished/Serviceable)....$99.95
GRD100 Gas Cylinder Lock (Used).......................$20.00
GRD104 Gas Cylinder Lock Screw Late (Used).....$20.00
In the original G.I. wrapper. Been
buried for 10 years. While the few
last - $29.95 TOOL016
A perfect reproduction of the grenade
launching rubber boot (slip on) for the
Springfield and M1 Garand. Absolutely
meticulously beautiful!!
............................... $34.50 MISC088
M1 GARAND GAS CYLINDERS
U.S. G.I. Gas Cylinders, not
foreign made replacement
parts.
2A.Serviceable grade, gaged for functionality.
Sarco’s Price ONLY GRD096
......................................... $85.00 each
2B. Refinished, serviceable. $99.95 GRD097
SPECIAL THIS MONTH!
Free original G.I. M84 scope data plate
with each M84 scope purchase!
M84 TELESCOPE SIGHTS FOR
THE1903A4 SPRINGFIELD &
M1D GARAND SNIPER RIFLES
A Mil-Spec reproduction of the original – produced by a company that produced these scopes
for a military contract years ago. Used original
drawings for the production. Comes with rubber
eye shield & date plate. Factory c
............................................. $399.00 GRD260
Add on deals:
A. M84 scope with M1D scope mount
............................................. $434.95 GRD261
B. M84 scope with M1D scope mount & scope
mount barrel block................ $479.95 GRD262
C. M84 scope with M1D scope mount, barrel
block, orig. G.I. new M1D rear handguard, sniper
cheek pad & T-37 prong sniper flash hider
............................................. $549.95 GRD263
M84 repro scope buyers from other sources-we
have original G.I. unnumbered M84 sccope data
plates from Libbey Owen Ford (the manufacturer)
NOS..........................................$24.95 M84014
Rubber eyeshield for M84 scope. Current production...........................................$14.95 M84055
RARE M1A2 GRENADE ADAPTER
FOR U.S. SERIES OF GRENADE
LAUNCHER (ALSO MANY
EUROPEAN)
New condition.........$24.95, 3 for
$69.95 Grenade not included. MISC124
RARE M11A3 WWII RIFLE
GRENADES
Lost in
warehouse
for
10 years!
M1D SCOPE MOUNT
Price reduced! Only $47.50
ORIGINAL G.I. WWII M1 GARAND
SLOTTED COMBINATION TOOLS
Repainted and may have minor storage
dings on fins. These don’t exist anymore!
Small quantity only! ......$34.95 AM125
M15 GRENADE LAUNCHER SIGHT SET
Original USGI unissued
Sight, Carry Case,
Mounting Elevation
Bracket, and instructions
from 1944. This sight
was used on the Garand,
M1 Carbine, and 1903
series Springfield Rifles
................................................. $9.95 MISC062
Or….. Add the original metal Jig used to set the
sight correctly on the Springfield and M1 Carbine.
Sight set above with the Jig (shown in the picture ).
................................................ $39.95 MISC420
GRD102
GRD286
GRD016
GRD080
GRD015
GRD013
GRD012
GRD014
GRD041
GRD039
GRD034
GRD032
GRD033
GRD040
GRD089
GRD037
GRD038
OIL002
CLN116 GRD182
OIL035 OIL015 OIL016 Gas Cylinder Lock w/Hump (Used)........$23.00
Gage......................................................$45.00
Hammer................................................$24.95
Hammer Int’l Harvester..........................$40.00
Hammer Pin............................................. $2.00
Hammer Spring....................................... $2.00
Hammer Spring Housing........................$10.95
Hammer Spring Plunger........................... $4.00
Handguard Band Rear ............................ $5.00
Handguard Ferrule Front ....................... $6.00
Handguard w/metal front G.I. special select
..............................................................$34.95
Handguard Rear M1D Used...................$20.00
Handguard Rear New G.I. M1D..............$29.95
Handguard Spacer Front ........................ $5.00
Hooded Rear Sight Aperture National Match
..............................................................$39.95
Lower Band...........................................$15.00
Lower Band Pin........................................ $1.00
Lubriplate pot, G.I. 3 for.......................... $3.95
M10 cleaning rod handle... $7.45, 3 for $20.00
New G.I. stripped Early WWII rear sight pinion
..............................................................$55.00
Oiler, late plastic WWII, new...................$13.95
Oiler, brass & throng set, exc.................$35.00
Oiler, plastic & throng set, used, exc
................................................................ $8.50
NEW WALNUT FRONT
AND REAR
HANDGUARD SET
With metal $32.95 GRD051
Without metal $24.95 GRD210
ORIGINAL WWII GARAND & M1CARBINE
G.I. canvas muzzle cover with strap $8.95
MISC047
M1923 (WWII Style) U.S. CARTRIDGE BELTS for M1 Garand
The standard 10-pocket with
cartridge belt as used during
W.W.II to carry .30-06 ammo
for the M1 Garand and M1903 Springfield Rifles.
Each belt has 10 individual pockets which can
hold 2-5 round stripper clips or 1 - M1 Garand
8 rd. clip of ammo. The pocket flaps are secured
with typical lift-the-dot fasteners. Belts are
adjustable for waist size, and each belt has many
metal grommets for attaching G.I. bayonet scabbards or other items of field gear. Nicely marked
“US” on the front pocket. Belts are made from
heavy webbing, dyed the proper greenish/khaki
color. Our belts are in new condition. SPECIAL
SALE!!! $19.95 ea. 3 for $54.95 GRD125
NEW!
ITEM
M1 STAINLESS STEEL GARAND
OP ROD SPRINGS
The Best On The Market!
Just got a new fresh shipment made from G.I.
blueprints. Replace your tired spring or put
away a spare now! Stainless Steel 17-7
....................... $7.45, 3 for $19.95 GRD171
Standard Music Wire Spring................ $5.95,
3 for...................................... $14.95 GRD296
NATIONAL MATCH REAR
SIGHT BASES FOR M1
GARAND & M14 (M1A)
New condition $46.50 GRD085
.30 CAL BORE BRUSHES
Normal .30 cal bronze
brushes
10/$9.95,
50/$39.95, 100/$69.95 BRUSH-001
Stainless steel bore brush fur cleaning those
tough military bores 5 for $8.95 CLN120
WWII PATTERN WEB SLING
Just reproduced for U.S. complete w/
markings. OD with all proper metal
fittings – Beautiful. Also proper for
Springfield & Enfield $9.95, 3 for
$28.45 SLNG057
WORLD WAR II PATTERN
M1 GARAND CARRYING CASE
WWII military style canvas carrying case
for the M1 rifle. These “U.S.” marked cases
are made of heavy, olive drab canvas and
equipped with a zipper, leather tabs and a
shoulder carrying strap. GRD115
..................... $14.95 ea., 3 for $42.95
Also have some USMC marked covers
....................................... $14.95 GRD347
M1 GARAND BUTTSTOCKS
These are original U.S./G.I. walnut stocks, some in especially choice condition. Several
grades available (these are the wood butt stocks only, no handguards or metal included).
Good to very good condition, has seen some use, but no abuse. Original finish, no cracks,
nice walnut, much better than average stocks GRD024......................................$110.00
M1C/M1D Sniper Stocks, We found a small lot of sniper stocks mixed in with the excellent condition reworked stocks described above. These sniper stocks have two small screw
holes in the bottom of the stock where the sniper cheek pad would have been attached.
GRD026 – These stocks are not marked
The cheek pads are not on these stocks, just the holes are present....... GRD026$145.00
Same stock with open box/SA inspectors mark ZZ2 ........................................$225.00
G.I. butt stock, average used condition, no cracks, might have minor chips on edges
GRD027............................................................................................................... $75.00
M1C/M1D stock as above with arsenal repair, no markings................................ $89.50
EMCF stock............................................................................................. $350.00 & up
GAW stock............................................................................................... $350.00 & up
HRA stock............................................................................................... $225.00 & up
Original .308 (7.62 NATO) Garand stock, new G.I................................................ $59.95
NATIONAL MATCH REAR SIGHT
APERTURE
ORIGINAL NEW G.I. GARAND OP ROD SPRING
Found some more in warehouse. $7.50
3/$19.95 GRD059
Your choice of .520
or .595 NM aperture.
$39.95 GRD089
Also for M14
M1 GARAND OP. RODS
NM SIGHT & APERTURE BUYERS PLEASE
NOTE: The aperture is made slightly oversized to
be fit to your sight base. The procedure is simple
& instructions are included. See our website for
the instructions if you wish.
M1 GARAND OPERATING ROD TIPS
(pistons) Brand new, made to Government
specs. Replace your worn piston diameter .5265” (high end + .0005")
Made of the proper 174PH steel
$9.95, 3 for $22.95 GRD211
GERMAN WW2 STICK GRENADE
(Potato Masher)
Accurately made inert German M1924
‘Potato Masher’
NEW!
grenade with reITEM
movable base cap.
The primary grenade used throughout the
war by Infantry. Comes with markings.
Excellent for re-enacting or static displays.
Real wood lathe turned handle with steel
head & cap.................... $24.95 MISC464
GRD056 Op Rod (National Match)..................... $175.00
Note: Above op rods are gaged & checked
GRD060 Op Rod Spring (Used)..............................$5.00
GRD052 Operating rod G.I...............................$140.00
GRD349 Op rod, Original #6 round edge-cut....$165.00
GRD141 Op rod gaged piston, Original unmodified Dash
9 - rod reparked.................................$175.00
GRD088 Rear Sight Aperture............................. $11.50
GRD348 Rear Sight Aperture Small Hole (.059).. $13.50
GRD094 Rear Sight Assembly Late ................... $60.00
GRD084 Rear Sight Base................................... $25.00
GRD085 Rear Sight Base National Match
............................................................ $46.50
GRD093 Rear Sight Cover.....................................$5.00
GRD017 Safety.................................................. $19.95
GRD112 Scope Mount M1D .............................. $47.50
GRD011 Sear........................................................$6.00
GRD114 Front & Rear Sight protective cover with muzzle
can.........................................................$5.00
SLNG024 Sling Repro WWI Leather, brass hook
............................................................ $16.95
SLNG025 Sling Repro WWII Leather, steel hook... $16.95
GRD107 Stacking Swivel (Used)............................$8.00
GRD108 Stacking Swivel Screw, new.$2.95, 5/$11.95
GRD028 Garand stock for .308 NATO cal gun, new
................................................................$59.95
Original USGI op rods made in the U.S.A. for
use on the Italian Garand. We have had a precision made Stainless Steel 174 P.H. tip made to
replace the shorter Italian tip. These rods are
proper length for the M1 Garand Rifle and are
freshly parkerized and function fit for guaranteed
performance. The original M1 Garand op rods
are getting EXTREMELY DIFFICULT TO FIND, so
please consider this now in order to hedge against
the scarcity of this item in the very near future.
$140.00 GRD052
M1 GARAND BRAND NEW BUTTPLATE
ASSEMBLY $29.95 GRD220
SPARE PIN & SPRING KIT
FOR M1 GARAND
Clip latch spring
Extractor spring
& plunger
Hammer spring
Op rod spring
Clip latch pin
Hammer pin
Trigger pin
Lower band pin
Op rod catch
pin
Value over $25 - $12.95 GRD219
M10 CLEANING ROD HANDLE
............................ $7.45, 3 for $20.00 CLN116
GRD027
GRD048
GRD047
GRD049
GRD050
GRD026
GRD024
GRD323
GRD009
GRD019
GRD020
GRD023
GRD022
GRD152
GRD008
GRD092
GRD090
GRD212
Stock Average Used Condition Average No
Cracks................................................. $60.00
Stock Ferrule Assembly........................ $13.50
Stock Ferrule Stripped......................... $10.00
Stock Ferrule Swivel................................$7.50
Stock Ferrule Swivel Screw.....................$2.95
Stock U.S./ G.I. Sniper MID/MIC (Used)
..........................................................$145.00
Stock U.S./ G.I. Used (Good Condition)
..........................................................$110.00
Trigger forging, orig G.I. new................... $4.95
Trigger & Sear Assembly...................... $12.00
Trigger Guard Milled............................ $25.00
Trigger Guard Stamped........................ $16.50
Trigger Housing Assembly
............................................................ $99.00
Trigger Housing Stripped..................... $40.00
Trigger Housing, Win. Reparked Stripped
................................................................... $65.00
Trigger Pin..............................................$1.50
Windage Knob early original
............................................................ $55.00
Windage Knob (Late Style)
............................................................ $11.00
G.I. winter trigger in orig. pkg
............................................................ $19.95
Whoaaaa…. Cholly’s Done it Again!!!
1911 Series 80 single stack, single action, full size pistol frames available in
either ordnance grade steel or lightweight aluminum! These are finished frames
except for several features that are unfinished to comply with BATF directives
classifying these as Non-Firearms in their present condition. Slide rails, hammer & sear pin holes, mainspring housing retaining pin, and ejector leg holes
remain to be applied. Grip screw holes are drilled and tapped. The frames can
be easily modified to Series 70 with the use of a commonly available adapter
shim. The Steel frame accepts the ‘Clark©’ type 1911 barrel while the Aluminum
frame accepts standard 1911 barrels. A BATF letter of ‘non-firearm’ status,
accompanies each order. These are the best quality 80% frames on the market,
manufactured by a major 1911 manufacturer! Act now before this small lot is
gone! Fits 4.25" slide or smaller.
ALUMINUM 80% FRAME......................................................................................................................................................... $125.00 C45328
STEEL 80% FRAME................................................................................................................................................................. $125.00 C45329
ALSO THESE 80% FRAMES JUST IN !!!!!
#500649 Extra Small Para Frame for 3" slide. Series 80, aluminum, Double stack, Single action............................................. $125.00 C45331
#500675 Para LDA Officers length grip frame in steel with checkered front grip strap. Accepts 4.25" or smaller slide. Single stack and Double
action............................................................................................................................................................... $99.95 3 for $249.95 C45332
#500678 ‘Agent’ extra small steel frame with checkered front strap. Single stack, Double action, and fits 3" slide
........................................................................................................................................................................$99.95 3 for $249.95 C45333
PARA LDA SLIDES
Brand new precision engineered PARA light double action slides with Trijicon front and rear sights installed
are now available at Sarco. We offer one for the 3 inch 9mm ‘PARA LDS CARRY 9’, and one for the 3.5” 9mm ‘PARA LDS OFFICER 9’ pistols. Beautifully finished in a dark gray Physical Vapor Deposition (PVD) finish. Wide rear serrations on the slide ensure an easy grip and
the pronounced Trijicon sights ensure the fastest eye ‘line up’ to target. The value of this package is astounding as the market price on the
sights is almost the same as the cost of the stripped slide! In this package, it’s like you are getting the slide for free!
1. 9mm Para LDA Officer 9 Slide w/sights....................................................................................................................................................$159.95 PARA154
2. 9mm Para LDA Carry 9 Slide w/sights......................................................................................................................................................$159.95 PARA159
*Specify the 3 inch or the 3.5 inch slide when ordering.
1911 PATTERN SLIDE BONANZA!
1911 PATTERN SLIDES FROM PARA ORDNANCE (SEE COMPLETE DETAILS ON LINE AT E-SARCOINC.COM
Sarco’s got em! Over 125 varieties! These include Standard models, Discontinued models, Overruns
and Custom Variations. Perfect time to upgrade your Para pistol or build up that 1911 frame! These
slides will also allow you to change pistol length, or caliber, or even upgrade your sights! Sarco’s
BIG VOLUME purchase, means BIG SAVINGS for you! These slides are premium material ... not
rejects or returns; material is the remaining inventory from the Corporate change over from Para
Ordnance to Para USA.
GUIDANCE FOR YOUR PARA SLIDE PURCHASE
All our Para slides are cut for the series 80 type firing pin interlock. Complete slides are built
with series 80 parts and a ramped barrel that will fit in 1911 frames that are modified for ramped
match barrels. You can build these up to work in standard U.S. G.I. 1911 type (series 70) pistols
if you wish, However doing so disables the safety features of the series 80.
Striped single action slides will work on any standard series 70 or 80, 1911 frame (series 70 is the
standard 1911) when built with the appropriate parts.
The Para LDA is a double action slide that will work only on Para LDA frames. You can however
cut the disconnector scallop in and use the slide on any standard series 70 or 80 1911 frame.
The 6" and 5" slide use standard 1911 recoil spring plugs and barrel bushing. The 4.25" slides
use Commander type recoil parts. The 3" and 3.5" slides use a unique recoil mechanism that is
available commercially.
There are 2 variations of extractors used on these Para slides. The first is the standard type which
uses any standard .45 extractor. The second is a PXT type. On this style the forward part of the extractor support rib is slightly larger in diameter. We have read that people have used G.I. extractors
as they are the same diameter in the back. PXT extractors or adapter bushings are available from
other sources. We will also soon have these available.
COMMEMORATIVE PARA SLIDES
5 inch
$119.95 PARA095
4-1/4
inch
3-1/2
inch
$139.95 PARA041
$119.95 PARA030
3 inch
$74.95 PARA001
BACKUP PISTOL OR EASY CONCEALED
CARRY?
Want a 3", 3.5" or 4" Hi-Cap
‘Snubby’? This may be the only 3”
slide on the market!!! We offer a
completely finished
new slide and one
of our wide body
frame castings
in steel or aluminum
for as little as $140.!
‘Way Less’ than the regular
price on the slide alone!
CHECK OUR WEBSITE FOR SPECIAL PARA SLIDES USED TO COMMEMORATE UNITS OR
MILITARY ACTION. LIMITED QUANTITY OF THESE EXCITING SLIDES IN STOCK!
PRICING DISCOUNTS - buy 10 slides (any assortment), take 5% off, or 25 slides (any assortment),
10% off, or 50 slides (any assortment), 15% off. WANT MORE ? Call or email Dave at [email protected] or Cholly at [email protected]
(610) 250-3960 SPECIAL COMBO DEAL!
Pick anyone of our PARA Slides and pair it with one of our Frame castings .... TAKE OFF $10.00!
Just got a new shipment of 500 slides and barrels in! We’ve been out for a few
months! The last 1000 went quickly so act fast before they run out again!
Oth
A NICE ASSORTMENT these 8e0rs%mray call
eceive
rs
OF FACTORY CASTINGS
C45284 - P12/P13 type, wide body 1911 type double action frame casting.
No parts interchange with 1911
C45286 - 1911 type, Single stack double action frame casting. No parts
interchange with 1911
C45288 -P12/P13 type double stack single action. Uses most 1911 type parts (see
other ad) Alloy light weight frame.
C45289 - P14 type double stack double action steel frame. No parts interchange
with 1911.
C45294 -P14 type, wide body 1911 type steel double action frame casting. These
also have the enhancement of a lower accessory rail in front of the trigger guard. No parts interchange with 1911.
C45296 -P13 type double stack 1911 .45 frame casting. Uses most 1911 type
parts. Alloy light weight frame. No parts interchange with 1911.
Special price for all above frame castings..................................................$29.95,
Mix or match 4 for.................................................................................. $100.00
Big Buyers call MG Dave or Cholly. We also have other wide body configurations
available. No returns on frame castings.
C45284
C45286
C45288
C45289
C45294
C45296
SERIOUS ABOUT COMBAT SHOOTING? ROTO 4M COMPENSATED BARREL
PARA ORDNANCE BARRELS…JUST IN!
These are in short supply everywhere right now!
High quality PARA Pistol barrels available in 8
varieties while supplies last.
PAR1 3.5 inch, .45 ACP, Match, Ramped,
Stainless Steel.............. $175.00 (F500443)
PAR1E 3.5 inch, .9mm, Match, Ramped, Stainless
Steel.........................$175.00 (F501301)
PAR1F 3 inch, 9mm, Match, Ramped, Stainless
Steel...........................$175.00 (391000)
PAR1A 4.25 inch,.45 ACP, Match ,Ramped,
Stainless Steel..$145.00 (F500171) P-13
PAR1B 5 inch, .45 ACP, No Ramp, Stainless Steel
........................$145.00 (F500173) P-14
PAR1C 5 inch, .45 ACP, Match, Ramped,
Stainless Steel $145.00 (F500174) P-14
PAR1D 5 inch, .40 S&W,Match, Ramped,
Stainless Steel$145.00 (F500444)
PAR152 5 inch, 9mm, Ramped, Stainless Steel
................................$145.00 (9391100)
NEW!
ITEM
.45 SLIDE CASTINGS
Colt 1911/1911A1 .45
ACP Slide Castings
We have 3 size castings.
These are in the white and require
machining to finish.
— 3" barrel sub compact C45293
— 3.5" barrel sub compact C45292
— 4" barrel compact C45291
— 5" barrel full size C45290
Your choice and mix or match the length
$14.95, 10 for $120.00, 50 for $500.00
DOD contractors have been buying up our Roto 4M barrels because they work! MODEL 1911
COMPENSATED BARRELS in 2 calibers will reduce recoil and speed your target acquisition
especially during multiple shots. Takes a minute to install our barrel that comes with Barrel
Bushing and permanently attached and ported Compensator. Also there is less weight on the
muzzle end than with conventional screw on muzzle compensators. Most
people comment on the change of performance, but also that it looks great
too! Sold elsewhere for $175-$200, Sarco’s price is $99.95 Specify caliber
when ordering: New, made in USA. .38 caliber C45024, .400 corbon C45194
NEW G.I. CLONE ROCK ISLAND ARMORY .45 1911
& 1911A1 BARRELS
The rifling is absolutely beautiful and the bore surface is
very smooth. Made from ordnance steel.... $49.95,
3 for............................................$143.50 C45202
MODEL 1911
.45 DRUM MAGAZINE
Fast shooting
became much
more fun with
this reliable and
well-made 28 rd,
.45 ACP, drum
magazine for
the 1911 pistol.
Easy to load and
operate!
$59.95 RPM309
www.e-sarcoinc.com
610.250.3960
E2
THREADED 1911 BARRELS
5-1/2 Inch
Brand new black oxide finished barrels in 3 calibers.
Thread is standard .578x28 TPI.
9mm Model 1911 5-1/2” barrel
..............................$60.00 C45360
.38 Super Model 1911 5-1/2” barrel
..............................$60.00 C45361
.400 Corbon Model 1911 5-1/2” barrel...........................$60.00 C45362
.45 ACP model 1911, 5.5” barrel
.............................. $60.00 C45321
THREADED PROTECTION CAP
FOR THREADED BARRELS
Barrels with .578x28 threads per
inch........................$13.00 C45363
Side Note: Threaded protection caps
for threaded barrels are used to protect
barrel threads when not using a
suppressor or muzzle break.
STILL LOWER PRICES ON ALL .45 AUTO KITS
.45 AUTO “BUILDERS KITS”
Put together your own .45 “Government” pistol with our Builder Kits. Several different
kits available to best fit your needs. Our parts are standard M1911A1/Pre-’70 Government type.
Price List: #1.Builders Kit - All parts in the gun less frame and slide
$149.95 or 3 for $429.95 C45095
#2.Builders Kit – All parts in the gun less frame,
slide,and barrel.$119.95 C45096
#3.Kit - All parts in the gun less frame. Kit
includes one of our new current manufacture G.I. type slide
(unmarked) C45097 $229.95
(Regular value $300)
C45218 - Builders Kit with Commercial Slide $254.95
Compare our prices and see how much you’ll save compared to
the competition!
Note: All gun parts may require some fitting and technical
knowledge for assembly. If you are not knowledgeable seek
professional assistance.
BEST QUALITY COMMERCIAL .45 SLIDES
o Special wide angled front and rear cocking serrations – for
easy grasping
o Nice subdued blue finish with sand blasted inner serrations o Lowered & beveled ejection port
o Unmarked slide o With desirable snag-free rear sight
o Free sight set ($20 value) All this for only..................................................$139.95 C45172
Note: Due to variations we have seen in frames & parts, slight fitting
of ejectors & extractors may be necessary
OUR NEW G.I STYLE 1911 GOVT. MODEL SLIDE
Current production compete with both G.I. sights installed. ($15 value) Made with improved
beveled ejecting port.................................................................................... $124.95 C45160
COMPLETE 1911 .45 SLIDE KIT
(All Parts For Slide)
A complete set of the top half of a .45 Government model. Kit
includes one of our new current manufacture slides (unmarked),
barrel, firing pin, recoil spring parts, sights, extractor, link & pin, band bushng. Over $198.00
worth of parts for only..................................................................................$174.50 C45092
Complete upper commercial slide kit for.......................................................$184.95 C45200
Our commercial slide set also available with one of our compensated barrel assy. for
........................................................................................................................... $229.95 C45093
OUTSTANDING ASSORTMENT OF QUALITY 1911 BARRELS
ROTO 4M HAMMER FORGED .45 ACP, 9MM & .38 SUPER
Built to precise tolerance by a special hammer forging process, these barrels are the best you can buy!
The hammer forging forms the barrel around a precision mandrel and holds the tolerance to .0001".
This is much better than the typical broached barrels found elsewhere
Note: 5" & 6" .45 barrels are L.H. twist – all others are R.H. twisted
COMPARE THE ROTO-4M BARREL FOR ROUNDNESS AGAINST A
STANDARD BROACHED BARREL FROM A WELL KNOWN MANUFACTURER. ALL ROTO-4M BARRELS ARE MADE IN THE USA.
Brand new extra length barrels for all Colt/1911/Government Model
type automatic pistols. These barrels are made by the Special Roto-4M
Hammer forge process which produces the most precise and consistent
barrels for the best accuracy. Minor hand fitting may be necessary for
some guns. Barrels do not include link & pin. Link & pin available
w/barrel purchase for additional $5.00 C45281 Available in:
.400 Corbon Barrels
41/4" Commander
$53.70 C45105
6"
$58.70 C45104
STD 5"
$53.70 C45025
.45 ACP
41/4" Comm.$51.70 C45010
5"......... $51.70 C45011
6"......... $59.70 C45013
7"......... $61.70 C45014
16"....... $79.50 C45016
.38 SUPER
5".....$51.70
6".....$58.70
7".....$62.70
41/4" Comm
....$51.70
.40 S&W 1911 5" barrel C45277 $53.70
9MM LUGER
C45017
C45009
C45018
C45164
41/4" Comm
$53.70 C45163 5"
$53.70 C45019 6"
$58.70 C45020 7"
$62.70 C45021
Note: 9mm & .38’s will not fit the .45 slide
9MM SINGLE ACTION 3 INCH SLIDE W/ TRIJICON SIGHT
Para 1911 single action slide with PVD finish , front sight slot cut,
and a Trijicon Wedge rear sight installed. Originally designed for the
LDA Carry 9mm pistol, but modified to work with all 1911 single
action frames. Accepts standard 1911 extractors.
........................................................................$139.95 PARA177
9MM SINGLE ACTION 3 INCH SLIDE
Para 1911 Single Action slide with PVD finish, front & rear sight
cutouts, wide rear serrations and accepts standard 1911 extractors.
Originally made for the Para LDA Carry 9mm, but modified to work
with all 1911 single action frames.
............................................................................................................................... $119.95 PARA176
F2
‘PROJECT’ REAR SIGHT FOR PISTOLS
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
.45 ACP PROJECT BARREL
Nice 6 inch .965 OD chambered barrel
blank for your next project
$19.95 MISC276
8 ROUND .45 MAGAZINE
New, blued steel
magazine for all .45
ACP Government
Model/M1911 type
pistols. Base plate also acts as finger rest
to improve your grip on the gun.
................................ $16.95 ea. RPM122
WIDE SPUR HAMMER
Desirable M1911 type
checkered wide spur hammers for the Colt .45 auto
pistol. These are new, ready
to install and upgrade your
pistol. Heavily checkered
(not grooved) wide spur
provides a sure grip when
thumb cocking or decocking. $12.50
C45054 (Comparable price $23.00) Note:
These are due in a month. Send order
and get on the list
For Colt mfg barrels, see our website.
.45 ACCURACY KIT
Upgrade your .45 Auto pistol and improve your
score with our Accuracy Kit. medium steel. Adj.
Trigger for smooth crisp trigger pull, a No. 13
match barrel link to tighten up the barrel in the
slide at the moment of firing, a high speed recoil
spring and a high speed firing pin spring.
SPECIAL KIT PRICE $13.95 C45089
.45 AUTO FRAME KIT
All parts to build a 1911A1 frame
(except the frame itself). Includes trigger, hammer,
grips, sear, mainspring, safety, etc., etc., (no slide
stop). $89.95 ea. C45099
M1911 “DIAMOND” GRIPS
These brand new
walnut grips are made
in the original World War I
style with the “Diamond” pattern
checkering. Give your
45 Auto the classic look
and feel of the original
Colt 1911 design.
$13.95/pr. 3/$36.50 GRP162
FOUND IN WAREHOUSE!!
ORIGINAL WWII G.I. COLT .45
AUTO COMPOSITION GRIPS
These were long ago taken off G.I.
1911A1’s – when the guns were
demilled. V.G. excellent condition.
$14.95 GRP131
3 HOLE LIGHTENED COLT 1911 LONG
TRIGGERS SPECIAL RUN
trigger pad is serrated
for good contact
....................$12.95,
3 for................................$36.50 C45173
1911 .45 AUTO PISTOL PARTS
C45095 Auto Builders Kit (Less
Frame & Slide)........................ $149.95
C45097 Auto Builders Kit (Less
Frame).................................... $229.95
C45096 A
uto Builders Kit (Less Frame, Slide &
Barrel)................................... $119.95
C45218 Builders Kit w/ Commercial
Slide....................................... $225.00
C45099 Frame Kit..................................$89.95
C45089 Accuracy Kit..............................$13.95
C45091 Auto Repair Parts Kit.................$22.50
C45017 Barrel, 5", Roto, .38...................$49.70
C45019 Barrel, 5", Roto, 9mm................$51.70
C45009 Barrel, 6", Roto, .38...................$56.70
C45020 Barrel, 6", Roto, 9mm................$56.70
C45021 Barrel, 7", Roto, 9mm................$60.70
C45018 Barrel, 7", Roto, .38...................$60.70
C45016 Barrel, 16", Roto........................$76.50
C45011 Barrel, 5", Roto, .45...................$48.70
C45025 Barrel, 5", Roto, 400 Cor-Bon....$51.70
C45013 Barrel, 6", Roto, .45...................$56.70
C45014 Barrel, 7", Roto, .45...................$58.70
C45010 Barrel, Commander, Roto, .45....$48.70
C45015 Barrel, Roto .45 w/ Compensator
.................................................$99.95
C45024 Barrel, Roto, .38, w/ Compensator
.................................................$99.95
C45040 Barrel Bushing............................ $6.50
C45087 Barrel Bushing Wear Gauge,
................................................Sold Out
C45085 Barrel Bushing Wrench................ $2.95
C45026 Barrel Link Pin............................ $1.00
C45028 Barrel Link, #13, NM......................$8.95
C45027 Barrel Link, Std........................... $4.95
C45098 .45 Cal. Bore Brush..................... $1.25
C45251 Colt 1911 Cleaning Rod M4......... $6.95
C45045 Disconnector............................... $7.50
Similar to 1911 standard rear sights,
this dovetailed rear sight has a width of
1.608", stands .328" high with a 1.20
peep notch that descends .074" into the
body. Width of the dovetail is .341" $3.95 ea, or
10 for $30.00, or 50 for $125.00 C45359
4 PRONG SEAR SPRINGS
FOR THE 1911
2011 production of genuine Trijicon rear
SPECIAL
sights designed for Para Ordnance style
All 3 kits of springs,
slides. Bottom dove tail width is .360". Use for a cuspins & screws above
for the 1911 Colt.
tom build, and it will work with a variety of .121" wide
Sale value is $18.65.
& .160" high front Trijicon sights. $44.95 ea, or 3
Super
Sarco Value
for $119.95 PARA137
$14.95 for all 3
sets C45259
NEW, ARMSCOR…
Once again available. The
normal spring acts on the sear, disconnector
& grip safety. This spring acts on the trigger as well to tighten up any slop. A great
innovation. Spring exerts constant forward
pressure on the trigger for nice crisp trigger
& prevents hammer and sear notch damage
and hammer follow on.................... $5.95,
3 for................................. $14.95 C45168
.45 FLAT MAINSPRING HOUSINGS
Brand new, flat (M1911 Style) steel
housings, grooves nicely for a sure
grip. Matte gray/black finish. These
are nice! $13.50 ea., 3 for $37.50 C45082
WIDE BEAUTIFUL GRIP SAFETY FOR 1911
.45 AUTO Stop the pinch in the
web of your hand (I used to get
bloody) $16.50, 3 for $49.95
C45079 (Note: These are for
short rear tang frame. You can
fit them to Std. frame)
1911 PISTOL PARTS
.45 Recoil Springs for the 1911 pistol
rated at 16lbs.................$4.95 C45326
Mag Catch for wide body 1911 frames.
Comes with release and spring
................................... $16.95 C45327
SPECIAL .45 COLT AUTO
REPAIR PARTS KIT
Containing the following parts: 4
grip screws, 2 grip screw escutcheons, 2 mainsprings, plunger
tube spring, sear spring, 2 ejector
pins, 2 mag. catch springs, 1 firing pin
stop, 2 firing pin springs, 4 hammer strut
pins, 2 firing pins, 2 mainspring housing
pins, 1 recoil spring. Regular $37.00
SPECIAL $22.50 C45091
.45 1911 ORIG. SEAR SPRINGS
Another find in the warehouse — while the few
last. $5.95ea., 3 for $14.95 C45319
OUR NEW COLLECTION OF 1911 TRIGGER STEEL & LIGHT WEIGHT
C45064
C45175
C45149
C45174
C45066
C45137
C45065
Long aluminum adjustable .................................................. $11.95,
Long aluminum non-adjustable............................................ $11.95,
Long steel adjustable ........................................................... $11.95,
Long steel non-adjustable .................................................... $11.95,
Medium aluminum adjustable ............................................. $11.95,
Medium aluminum non-adjustable ...................................... $11.95,
Medium steel adjustable.....................$11.95, 3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
3/$32.50
Note: All triggers have serrated face for solid finger contact. The medium length is a perfect compromise as the short and long triggers don’t
fit all hands. Shoe length is 5⁄16". Comparable price $18.00 or more.
PISTOL & RIFLE STRIPPER CLIPS
EA.
3 for
10 for
STC003 Carcano – (light rust but works fine - Last of ‘em!)
$4.95
STC005 AR15/M16 Guide $1.50$3.50 $9.95
STC008 Steyr ‘95 Rifle
$3.95 $11.00$30.00
STC009 6.5 Dutch Rifle
$4.00 $11.00$39.95
STC010 Enfield .303
$3.00
STC011 Steyr Hahn 9mm Auto
$3.00$8.00 $20.00
STC014 Mosin Nagant $2.50 $5.00
$16.95
STC016M14
7 for $9.95
STC020 Swedish Mauser N/A $4.00$10.00
STC025 1903 Springfield, Brass, Original
$4.00 $10.00$30.00
STC029 1891 & 1909 Argentine
$1.50 $3.25
$9.00
STC031 Mannlicher 7.65 pistol $6.50 $18.00 $49.95
STC013 ‘98 Mauser steel stripper clip
$2.00 N/AN/A
STC018 ’93 Mauser brass stripper clips
$3.00$8.00 $20.00
STC028 Orig. ’98 Mauser brass stripper clips, never seen before. Few only
$3.00 ea.
STC033Replacement Mauser C-96 Broomhandle 8rd
original military N/AN/A $10.00
STC006 Rare 1896 Mannlicher stripper clips
$24.95 $59.95
STC024 SKS stripper clip $1.00$2.95 $7.95
STC032 Fine workable stripper clips for Jap type 99 & 38
5/$9.95,
10/$14.95
Note: all above stripper clips are original except 91/30
UNIVERSAL 9MM STRIPPER CLIPS
½" wide ¾" long holds 10 rds
Got a pile of ‘em so cheap cheap! STC036
10 for.......................................................... $8.00
50 for........................................................$30.00
100 for.......................................................$50.00
C45068 Ejector......................................... $4.75
C45067 Ejector Pin................................... $1.00
C45030 Extractor...................................$12.00
C45044 Firing Pin..................................... $4.95
C45301 Just in the door! Series 80,
9mm & .38 Super firing
pins– Now available for 1911
pistols........................................ $5.95,
3 for............................................ 14.95
C45029 Firing Pin Spring......................... $1.75
C45043 Firing Pin Stop............................. $4.25
C45032 Front Sight A1............................. $5.00
C45079
Grip Safety, Wide Extended Black (Note:
These are for short rear tang frame. You
can fit them to Std. frame)
.................................................$16.50
C45078 Grip Safety, Long Tang
.................................................$12.00
C45151 Grip screws, Stainless Steel, 4 for
................................................... $5.95
C45073 Grip Screw Bushing..................... $1.00
GRP131 Grip Set, Plastic, GI, exc.
.................................................$14.95
GRP162 Grip Walnut, Diamond Style, new
..................................................... $13.95
C45052 Hammer Pin................................ $1.00
C45056 Hammer Strut............................. $3.50
C45055 Hammer Strut Pin....................... $1.00
C45053 Hammer, Regular Spur................ $9.95
C45054 Hammer, Wide Spur...................$12.50
C45060 Mag Catch................................... $6.95
C45061 Mag Catch Extended.................... $9.95
C45327 Mag Catch Wide Body, Armscor.$16.95
C45062 Mag Catch Lock........................... $2.00
C45063 Mag Catch Spring........................ $1.00
C45094 Magazine Pouch........................... $7.95
C45047 Main Spring................................. $2.00
C45084 Main Spring Cap.......................... $1.25
C45083 Main Spring Cap Pin.................... $1.00
SUPER
TRIJICON 1911 REAR SIGHT
PARA ORDNANCE EXTRACTOR SLEEVE
Troublesome
PXT extractors (Power
extractors),
can be easily replaced
with this Para Ordnance extractor sleeve
which can easily be installed in minutes
with ‘Locktite’ allowing you to use standard 1911 style extractors! Designed for
use in series 70 slides and easily modified
to work in series 80 slides. Sleeve only
......................................$9.95 PARA308
SARCO SPECIAL
Two of our famous 1911 .45
mags plus a web mag pouch
(below) for only........$20.95,
2 sets for.....$39.95 C45310
DOUBLE MAG POUCHES
FOR COLT 1911 .45
Exact repro with WWII markings. We
had these 2 years ago but got lost in the
warehouse.................................. $4.95,
3 for............................. $11.95 C45280
C45059 Main Spring Housing Retainer Pin
................................................... $1.40
C45082
Main Spring Housing, Flat (Checkered)
.................................................$13.50
C45145
Main Spring Housing Flat &
Grooved, Composite..................... $8.75
C45171
Main Spring Housing, Steel w/loop
.................................................$16.50
C45050 Main Spring Retainer................... $1.00
C45049
Main Spring, for Alum.Frame....... $1.25
C45001 Rear Sight................................... $4.75
C45326 Recoil Spring, Armscor................ $4.95
C45036 Recoil Spring, Standard............... $2.75
C45037 Recoil Spring Guide..................... $4.65
C45038 Recoil Spring Guide, Commander.$3.50
C45034 Recoil Spring Plug........................ $4.00
C45232 Recoil Spring Plug G.I. New
.................................................$14.95
C45126 Recoil Spring, High Speed............ $3.95
C45138 Reverse Recoil Spring Plug........... $7.50
C45074 Safety Plunger............................. $1.45
C45075 Safety Plunger Spring.................. $1.75
C45086 Screw Driver & Take Down Tool
................................................... $4.95
C45058 Sear............................................. $8.50
C45057 Sear Pin....................................... $1.00
C45051 Sear Spring.................................. $3.95
C45111 Sight Set, Battle Combat............$14.95
C45092 Slide Kit.................................. $168.95
C45076 Slide Stop Plunger....................... $1.45
C45003 Slide Stop, Standard..................$12.00
C45002 Spring Kit.................................... $7.75
C45046 Thumb Safety............................$10.00
C45173 Trigger Alum 3 Hole...................$12.95
C45064 Trigger Long Alum Adj...............$11.95
C45175 Trigger Long Alum Non-Adj........$11.95
C45149 Trigger Long Steel Adj................$11.95
C45174 Trigger Long Steel Non-Adj.........$11.95
C45066 Trigger Med Alum Adj................$11.95
FRONT TACTICAL
COMBAT SIGHT FOR
1911 FOR DOVETAIL SLIDE
170" height .135
blade width. For
standard 1/4" dovetail red highlight on back.
SARCO PRICE $4.95,
3 for $9.95 C45140
(Comparable price $19.95)
MODEL 1911 SCREWDRIVER
& TAKE DOWN TOOL
Original WW2 era tool for
the Model 1911 pistol.
Handy and very compact in
size. Issued from WW1 on,
these tools were originally
part of the 1912 Squad Cleaning Kit. VG/
Exc. condition
......................................... $4.95 C45086
We have a few with manufacture markings
like ‘Stanley’ and ‘Metlglas’. Specify mfg
when ordering $9.95 ea. C45320
COLT 1911 STEEL MAINSPRING
HOUSING w/LANYARD LOOP
Housing is grooved for a sure
grip 1911A style - nicely blued
$16.50, 3 for $47.50 C45171
STAINLESS STEEL 1911 PARTS
C45038 Recoil spring guide (matt finish)
Commander.............................$3.50
C45299 Ambidextrous slide stop matte
finish.................................... $12.95
C45150 Reverse recoil spring plug........$6.95
C45312 Hammer pin............................$2.00
C45313 Mag catch lock........................$3.00
C45314 Mainspring Housing pin..........$2.00
NICKEL .45 PARTS 1911
C45315 Slide stop............................. $15.00
C45316 Barrel bushing........................$8.50
BRONZE .45 CAL. CLEANING BRUSHES
5 for $4.85 C45098
.45 1911 SKELETON HAMMERS
Available again and at a special price
- Others get $50 to $75 for these.
Could require very minor fitting to
some grip safeties due to the variations in manufacture of
NEW
grip safeties.Our Price $14.95,
ITEM!
3 for $36.95 C45256
1911 combat sight set millet rear sight
plus (tactical) wide blade front with
1/4" dovetail red highlight Retail value
$62.00. Sarco Special $19.95/set, 3
sets for $42.50 C45177
MILLET MARK I
Combat High Profile Rear White Outline
Sights Fits Colt 1911 dovetail. White outline
gives clear sight picture. Retail value $22.75.
C45131 Sarco Special $9.95, 3 for $24.95
ORIGINAL NEW 6in SLIDE
1911 RECOIL SPRINGS
Can also cut to length for 5" 9mm guns
9mm.$3.95ea or 10/$24.95 Para150
.45 ACP $3.95ea or 10/$24.95
Para151
BACK AGAIN AFTER BEING OUT
OF STOCK. 1911 COLT HIGH
SPEED RECOIL SPRINGS
Great story: Our spring maker is a gun
buff. He tried one of these springs in
his 1911 and had to call us to tell us
how great it is. Our first overwhelmed
customer on this product.
..................................................$3.95,
3 for...........................................$8.45,
10 for........................... $22.95 C45126
SUB COMPACT 1911
MAINSPRING HOUSING
These are the checkered flat housings made from reinforced nylon,
complete with 2 plungers and spring.
Also useful for our Para Ordinance frame casting
projects. Good for replacement or the custom
build. 2 sizes.We’re giving you $4.50 in free parts
in the assembly.
1.632" High.................................$7.95 C45302
1.357" High.................................$7.95 C45303
Also have the 1.357" unit with vertical grooves
rather than checkering if you wish
....................................................$9.95 C45311
Full pin set for Colt .45
NEW!
Auto. All seven pins for the
ITEM
M1911. New $4.85/ set,
10 sets for $38.50,
100 sets for $285.00 C45195
Just in the door!
NEW
.40 S&W, 9MM & .38 SUPER
ITEM!
FIRING PINS – Now available
for 1911 pistols......................... $5.95,
3 for..............................14.95 C45301
Will fit both 70 Series and Series 80 pistols
.45 BARREL BUSHING WRENCH
$2.95 Free Bonus –
Other end is an M16
shorty buttstock installation wrench TOOL031
.45 AUTO SPRING KIT
One each of all 6 springs in a Colt .45.
A $13.25 value for only. Includes sear spring
$7.75 ea. C45002, 10 sets for $65.00, 100
sets for $450.00
SUPER SPECIAL
All 3 kits of springs, pins & screws above for the
1911 Colt. Sale value is $18.65. Super Sarco
Value $14.95 for all 3 sets C45259
FRONT TACTICAL COMBAT SIGHT FOR
1911 FOR DOVETAIL SLIDE
170" height .135 blade width. For standard
1/4" dovetail red highlight on back. SARCO
PRICE $4.95,
3 for $9.95 C45140 (Comparable price $19.95)
1911 .45 AUTO MAGS
Only $8.95, 10 for $74.95 C45298. This is is half the price of
most reasonable .45 mags! See our website for more details!
HIGH QUALITY 10 ROUND
.45 1911 MAG
.45 single stack magazines for 1911 Colt
Special............................... $19.95 ea,
3 for............................ $49.95 RPM127
SARCO SPECIAL
WORLD WAR I PATTERN .45 1911
MAGS WITH LANYARD LOOP
ORIGINAL BROLIN 1911 MAGS
C45238 7RD for detachable bottom weight
with orange composite trough follower
............................................$24.95
RPM158 7RD Brolin marked mag......$19.95
RPM283 8RD Brolin marked with composite
floorplate.........................................$24.95
NEW VARIATIONS OF OUR
1911 .45 ACP MAGS - JUST
IN THE DOOR
Stainless steel magazines
.......................................$10.95,
3 for.................... $29.95 RPM121
G.I. marked 1911 magazine marked
.45 ACP #1005-00-8694 MFR8R320.
$10.95,
3 for$29.95 RPM155
WWI PATTERN .45 1911 MAGS
WITH LANYARD LOOP
............$12.95 ea.
OR buy
3 mags for..$36.95
and get a free pistol
lanyard for the mags!
C45295
C45137
C45065
C45148
C45077
Trigger Med Alum Non-Adj.........$11.95
Trigger Med Steel Adj.................$11.95
Trigger Med Steel Non-Adj
.................................................$11.95
Tube Slide Stop & Safety Plunger
................................................... $4.95
C45295 - 1911 mag with lanyard loop
$13.95
Buy 3 mags for $36.95 and get a free
pistol lanyard for the mags.
These are rarely seen now a days.
Best way to participate in fast combat
shooting where you must drop and load
mags quickly. Avoids damage to your dropped
magazines. WWI Cavalry and vehicle crews
would keep 2 or 3 mags on a lanyard for combat purposes! Original mags came with hemp
twine so you could tie them to the lanyards
individually. These magazines are made on
the same automated machinery as our famous
magazines shown above. This is the mag to
have if you want to be serious about CQB
firing and reloading quickly. Very popular for
modern combat pistol tournaments.
SPECIAL OFFER!
2 lanyard loop
mags w/lanyard
and U.S. military
double mag
pouch
$29.95
C45318
U.S. MILITARY FLECHETTES PACK
Historically used through the ages for defense, these 1 inch
long Flechette Darts were thoughtfully saved from Beehive
munitions. Since we have a limited
supply, we are offering you a 2 oz.
pack which holds about 100 flechettes
$7.00/2oz pack (100+pcs)
MISC288
Save BIG when you buy a POUND!!
1 LB/$24.95 MISC307
GUNSTOCK FURNISHINGS
JUST IN...LEE ENFIELD
RIFLE MAGAZINES
#1 MK3 Enfield
Rifle Magazine
1903 SPRINGFIELD
BAR STOOL STOCKS
Here is a neat project for
the home handyman. We
have a big pile of unissued condition G.I. 1903
Springfield walnut stocks
that were modified years
ago to make into bar
stools! Ouch! What a
waste of good stocks! The
stocks were shortened and
notched to hold a seat and foot rest ring (not included). The fellow who was doing this went out
of business and we bought all of his stock legs. To illustrate the concept we have made up a
simple bar stool so you can see the possibilities. It is a shame he cut the stocks, as they were
new, unissued G.I. 1903 stocks, but his loss can be your gain. Add a swivel seat of your choice
to the top. All stocks have been precut and drilled. You have to make 2 circular or octagonal
spacers..............................................................................................$39.95/set of 4 SPF124
UNBELIEVABLE NEW YEAR SPECIAL CLOSE OUT PRICE!!
SUIT OF MEDIEVAL ARMOR (FULL SIZE!)
Full sized set made from 20 gauge steel , complete with stand!.
Stands over 6 feet tall and when on it’s base, 80" tall! Comes complete with helmet, skirt, and battle sword. A quality set of armor
which will be eye candy to anyone who comes in your store!
We purchased in bulk
so compare at current
WW2 BRITISH COMMO WEALTH
market retail of $2400 HELMET W/ AUSTRALIAN
$5,000!
EMBLEM
Well-made steel British
style helmet with 1st
pattern spring loaded
canvas chinstrap. The
famed Australian 6th
Division emblem is
adorned on the left side
....................$32.95 HLM027
REMINGTON 40X SERIES
RIFLE STOCKS
Beautiful original rifle stocks from the
Remingto factory. Cholly purchased
these about 20 years ago from Remington Arms and buried them in the
‘Grotto’. Now resurrected from their
deep sleep, they are begging to be connected to actions! These are grade A
walnut stocks. Exceptionally nice and
very limited!.............$125.00 STK379
Brand new!
Never on a gun!
Quantity is very limited
so act quickly.
Some assembly required.
$695.00 each MISC401
HANDSOME PRE WWI MODEL
MILITARY GERMAN HELMET
1889 PRUSSIAN
KURASSIER,
PICKELHAUBE
Helmet made from
steel with leather
liner, brass scalloped
chinstrap, cockades,
steel spike and brass
emblem. Inscription
embossed on brass
emblem translates from
German as, ‘With God
for Kind and Fatherland’. (Mit Gott Fur
Koenig und Vaterland)
..........$84.95 HLM012
MLE-49 FRENCH INDOCHINA BRITISH PATTERN ‘SAM
INDOCHINA & ALGERIA BUSH BROWN’ BELT SET
Ruggedly crafted with strong
HAT
leather, saddle stitching, and
Finally
obtained
some
Large
size
(U.S. size 7-1/2 inch), hats that are
almost impossible to come by. The
best Bush hat around and highly
coveted ! The hat is made the same
way as the original with thick cotton batting in the brim with labor
intensive spiral sewing throughout
the hat. The type of hat you’ll wear
year round whether in Colombia
or Alaska! A favorite of the French
Foreign Legion..... $29.95 MISC431
solid brass hardware, this
SAM BROWN BELT is as
good as it gets for military
or police duty. Has sword
connecting rings too ! We
have two colors: Black or
Brown. Additionally we
can offer the brown belt
set with a British Webley
holster as used a
century ago.
BLACK “SAM
BROWN” BELT
$44.95 MISC389-BLK
BROWN “SAM
BROWN” BELT
$44.95
MISC389-BRN
BROWN “SAM
BROWN” SET W/ WEBLEY HOLSTER $54.95
MISC390
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
#4 MK1 Rifle Magazine
.303, 10 rd. capacity and broad arrow marked. We’ve worked on having these made accurately for over 2 years of development & testing. Exactly like the WW2 issue magazine!
Extremely difficult to find on the market and we’ve been very challenged to keep originals
in stock. Now all of our hard work to bring these to you can pay off and at an unbeatable
price! $29.95 each, 3 for $84.95, 10 for $129.95 RM61
.303, 10 rd. capacity
$40.00 RM011
M1 GARAND WALNUT BAR STOOL STOCK PROJECT
M1 Garand Walnut Stocks for that special project! Outstanding value
in original ‘new’ old stock walnut Garand stocks that have had the
front ends cut and flattened by about an inch or so for a furniture
contract that never got off the ground. You benefit because we want to
move them and Cholly’s got a friendly price in hand. These stocks are
really beautiful and still have military cartouche markings on them
and a smooth walnut finish. Great for making project furniture. These
pictured items are just some of the
great ideas you can try! Stocks are
approximately 28 inches long.
$10.00 each stock, 4 for
$29.95, 6 for $50.00,
11 for $69.95, 100 for
$399.00 GRD339 *For even larger
quantities, we’ve got you covered….
Call Mark, Dave or Cholly
for Big quantity pricing!
H2
Phones Open: Mon Fri, 8:30am – 5:00pm
Showroom Open:
Monday - Saturday,
10:00am – 5:00pm,
Friday til 8:00pm
Enfield 2A1 Rifle
Magazine,
NEW!
ITEM
.308 Nato, 10 rd.
capacity… $44.50 RM039
ENFIELD PARTS & ACCESSORIES
RARE STOCK SET
(stock, forend & HG’s) for #4 MKII Enfield (trigger
on the receiver) – New condition. Need to stain to
match. Without cross bolt.... $140.00 LE4074
#4 MKII Stock Set, used w/o cross bolt
............................................................ $109.95
#4 Standard Enfield Stock Set, used........$99.95
ENFIELD RIFLE KHAKI RIFLE
CASE
Made
from
heavy
canvas material, this gun case was used for Enfield #1 MKIII & #1 MKIV rifles. Will fit many other
rifles. Includes khaki sling!......... $16.95 LE3092
Complete set of #1 MKlll stock hardware–
buttplate, swivels, forend collar assembly,
bands, nose cap, rear sight protector, stock bolt
and all related parts. 27 parts $48.50 LE3094
See our website for complete list of parts in kit
#1 MKIII & # 4 ENFIELD
SPECIAL ITEMS
LE3074 Brand new original G.I. Buttstock
#1 MKIII.............................................$19.95
LE3075 #1 MKIII complete Safety Assy............$16.50
LE3078 #1 MKIII Original brass buttplate.......$14.95
LE3076 #1 MKIII Enfield .22 LR cal bolts,
complete super rare........................ $100.00
LE4063 #4 MKI complete Safety Assy..............$16.50
LE4077 Original #4 Enfield brass buttplate VG.$14.95
LE4004 #4 Bolt head size # 1, new orig...........$24.95
3 for...................................................$64.95
LE4005 Bolt head for # 4 Enfield, new standard
............................................................$13.50
LE4062 Original pull thru field cleaning
device, new......................................... $2.95,
3 for..................................................... $6.95
LE5001 # 5 Complete buttstock assy for jungle carbine
–current production Includes buttplate assembly
........................................................... $39.95
MISC196Original Extractors for the .308 (7.62mm
Nato) cal #1 MKIII Enfield – These are
called the model 2A.........................$19.95
LE4096 Original Israeli # 4 Enfield scope rings for
the brass Israeli #32 scope for the Israeli #4
Enfield sniper rifle (few only).. $59.95/set
LE4010 # 4 Enfield striker (firing pin) new original
factory........................................... $17.50
LE4104 #4 Enfield L shaped battle sight.......$8.00
LE4079 #4 Enfield stock & handguards set, used
..................................................... $99.95
LE3049 # 1 MKIII Enfield striker (firing pin) new
original factory.............................. $17.50
LE4014 # 4 Enfield complete bolt............... $90.00
LE3064 # 1 MKIII Enfield complete bolt...... $69.95
RM57 Just a couple - .45-70 magazine for Navy
Arms .45-70 Enfield...................... $85.00
LE4013 #4 Enfield extractor spring...............$7.85
LE3095 Rare long Lee and Lee Medford sliding dust
cover, few only.............................$100.00
LE3059 #1 MKIII Enfield extractor spring.. $10.00
THE NO. 4 ENFIELD TARGET/
MATCH SIGHTS
These sights were made by the famous British gun maker. Parker-Hale, for use on a
high power military target or sniper rifle.
• Long range vernier micrometer sight
• Adjustments up to 1300 meters
•M
icrometer click adjustments for windage
• Windage scale plate for possible adaptation
•A
djustable aperture disc that has six different openings from .030 to .053
This has got to be one of the most outstanding Enfield No. 4 micrometer target sights
ever offered.
TO INSTALL THIS SIGHT
ON YOUR #4 ENFIELD.
TWO SIMPLE OPERATIONS ARE NEEDED.
Full and clear instructions are included for the
installation of this sight on your fine Enfield
rifle. We could have charged $100 to $125 for
this fine sight, but we’ll offer it now at only
................................................. $49.95 PH007
ORIGINALLY HAD 4,000 PIECES, NOW WE’RE
ALMOST SOLD OUT!!
FULL ENSEMBLE/ENFIELD #32 MK1 SNIPER SCOPE
Outstanding detailed steel reproduction telescope
used on the Lee Enfield sniper rifle. Ruggedly built ,
it has a sliding eyeshade, drum adjustments w/ distinctive and solid clicking allowing for deflection of
16 minutes of angle left or right, as well as elevation
settings at 2 minutes of angle each. Range drum
allows adjustments at 50Yds per click out to 1000
Yds. Complete set comes w/ steel case, adjustment tool, scope mount, lens covers ..... and as
a bonus Sarco includes 2 bases, screws, taps and drill bits so you can install the mount. The
Sniper Scope and all the accessories for.........................................................$595.00 N3207
Original #32 Scopes fetch as high as $7500.00!
COMPONENT PARTS AVAILABLE INDIVIDUALLY TOO!
1. #32 MK1 SCOPE by itself......................................................................... $399.95 SCP034
2. Set of rings & mount w/o bases............................................................... $129.95 SCP001
3. Leather Lens Cover.....................................................................................$21.50 SCP036
4. Front & Rear Base (Pads).............................................................................$39.95 LE4071
5. Drum Adjusting Tool...................................................................................$22.50 SCP037
6. Transit Chest for scope............................................................................ $139.95 SCP035
7. Full Set of Base Screws & Drills & Taps...................................................... $39.95 LE4075
ENFIELD MK4 #1
EARLY SWIVEL
NEW!
ITEM
Early production butt swivel
later replaced by the easier to
produce oval style..............$7.00 LE4111
Enfield parts, parts & more parts!
NOTE: We have most all parts for #1 MKIII, #4
MKI and #5 Enfield– along with many variations &
accessories. Check our website.
BUILDING A #4 MKIT SNIPER RIFLE?
Mounting & tapping the bases is not easy. We got
a turnkey set for you – all one with the proper
British thread.
1. 7 proper screws (we send you 2 extra in case you
loose or mess up any)
2. The two taps you need with the proper thread.
3. The two proper drills you need for the job – .British size.............................................. $39.95 LE4075
Note: these tools are industrial quality and not
returnable. Set of 5 proper screws for the job w/o
the tools....................................... $14.95 LE4076
ENFIELD #4 MKIT SNIPER RIFLE CHEEK
PIECES
Just in the door!
Complete with
proper brass
screws. Use to
build your sniper rifle or also to create a
high comb buttstock...........$24.95 LE4106
BRITISH ENFIELD CANVAS SLING
We are now able to
offer you 2 of the
Wartime canvas
slings used on the
Lee Enfield Rifles
as well as 1 post
war issue sling.
These are new
made and all feature brass hardware and an accurate cotton weave.
Colors available:
TAN
SLNG102
BLACK
SLNG096
RAF BLUE SLNG095
Your choice…
$6.95 each
NEW!
ITEM
BRITISH ENFIELD ACCESSORY KIT
Sling, firing pin tool,
oiler, field cleaning rod (pull
through), and brush. Value
$22, Special $16.95 LE4061
NEW!
ITEM
MLE –SMLE PATTERN 14 SLING
This sling is a reproduction of the Pattern 14 leather
sling used for the SMLE (Short, Magazine Lee Enfield) starting in 1914, also known as the “Austerity
Pattern”, a shortage of web gear forced the Brits to
re-introduce leather. Leather rotted in the trench environment so the Pattern 14 was used in second line
and rear echelons as much as possible. The generous 49 inches of length on the Pattern 14 was widely
used in both the SMLE and the MLE (Magazine, Lee
Enfield) 5" longer that the SMLE. This incredible
reproduction of the Pattern 14 sling, will look and
feel as authentic as the originally produced in 1914,
install it and show it off, a perfect companion for
your Lee Enfield............................$9.95 SLNG079
COMPLETE SET OF #4
ENFIELD STOCK HARDWARE
Buttplate, bands, swivels, handguard ring,
bolt and all related screws and washers. 17
parts..............................…$39.95 LE4103
See our website for complete list of parts in kit
Enfield questions? Email Lucas for
answers! [email protected]
#4 MKIT ENFIELD SNIPER RIFLE SCOPE
MOUNT BASES
• (Also called the “pads”) • Front and rear pads (set)
LE4071 $39.95 (only have a few of the sets)
#4 MKIT SNIPER COMPLETE PROGRAM
Includes the scope mount, mounting bases
(pads), plus the 7 proper screw & 2 drills &
2 taps. This all you need to build your # 4
MKIT Sniper on a
#4 Enfield rifle..........................$219.95,
3 for...............................$624.00 LE4080
Special – complete scope mount with the
mounting pad set......... $189.95 LE4081
ENFIELD #4 MKIT SNIPER SCOPE
MOUNTS
These fine
scope mounts
are now in
stock again.
Telescope
mounts for the
British Enfield
#4 MK I (T)
Sniper Rifle. We made these because there
are so many #4 MK I (T)’s that were imported
with out scopes. The good news!! These
mounts will take a standard commercial 1”
tube scope to use on your rifle while you are
seeking an original scope for the rifle. Made
to meticulous detail to the original as we have
with all our reproduction scope mounts. Sold
at a very special price considering the rarity
and value of an original mount.
................................ $159.95 each SCP001
(Note - does not include scope or receiver
pads)
ENFIELD STRIPPER CLIPS
We just bought the last small quantity we know of.
They are now dinosaurs. While they last!
................................................ $3.00 ea. STC010
ENFIELD RIFLE ID DISC
NEW!
ITEM
Brass 1 inch diameter disc which
is fitted into the right side of the
Lee Enfield Rifle stock. Frequently
found on British & Commonwealth
forces service rifles, these discs
sometimes had proof marks and or mfg.
names, dates etc. A great way to improve the
appearance of the Enfield Rifle. Engraved
brass disc w/ 4 markings .......$6.95 LE3084
G2
MOSIN NAGANT M91/30 & EARLY CARBINE BAYONET
50 Hilton Street,
Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
Mosin Short 11.5 inch bayonet as
used by Finnish Cavalry and Russian
Police on early Carbines without side
folding bayonets. Also fits standard length Mosin 91/30 rifles. These do not have
the Finnish SA mark so we expect they were strictly of Russian origin as brought
in by Interarms in the 1960s. Lost for decades in the warehouse, there are very
few available............................................................................... $44.95 BAY261
MOSIN NAGANT MODEL ‘44’ CARBINE BAYONET
2 variations available in limited
supplies:
A. Mosin 44 Bayonet w/ Single
Ear connection. 1945 & earlier
................................................................................... $28.95 BAY262
B. Mosin 44 Bayonet w/ Double Ear connection
................................................................................... $26.95 BAY263
FAL TUBULAR BAYONET
SWEDISH MAUSER BAYONET M96/
M38
Original early FAL bayonet for thin barrel, short
flash hider FALs and STG-58.
Bayonet w/ scabbard canvas belt connection
................................................. $19.95 BAY016
Bayonet w/ scabbard w/o belt connection.
..................................................$18.95 BAY171
Bayonet w/o scabbard.................. $9.95 BAY156
BRITISH SPIKE BAYONET SCABBARD
Newly manufactured
steel scabbard.
Perfect replacement!....... $9.00 BAY235
WW2 ITALIAN M91 FIGHTING KNIFE
Say what you will about the
Italian Army in WW2…. But
one thing is true, and that is
the quality of their fighting
instruments like the M91 knife were among the
finest battle weapons. Our late production knife
with scabbard is a terrific combat knife sporting an
8 inch steel blade, hardwood handle and scabbard
with locking belt keeper. It has very good balance
compared to most fighting knives that are usually
way too heavy on the grip end. U.S. GIs loved to
use them for knife throwing. Originals will cost you
$400-800. Sarco’s price buster special
.................................................... $26.95 BAY255
ORIGINAL MOSIN
91/30 BAYONET
$19.95 BAY019
SPRINGFIELD WOOD BAYONET GRIPS
New production, new condition
wood grips for the M 1905 pattern
bayonet as used on the M1903
Springfield rifle. Fix up or up-grade
your old bayonets with these beautiful new grips. Heavily grooved
for better holding, just like some
originals we found and sent to the wood
workers to copy. Screw and nut included.
Ready to fit on to your blade
..........................................$9.95 per set
or 3 sets for.................... $24.95 GRP143
SIG 530/ 540/ 542 RIFLE BAYONET
Socket style bayonet as used on
various SIG rifles
and used by the French military in the 80s.
Comes with scabbard......... $75.00 BAY130
Well crafted scabbard w/ leg tie and
metal reinforcements. WW2 design
intended for use with the M3 fighting knife,
but works with other similar sized blades like
standard M14 & M16 bayonets
................................................................. $14.95 BAY184
WW2 1938 CARCANO FOLDING
BAYONET
As used by
paratroops and
specialized infantry. Faithfully manufactured
from an original. With scabbard. Great price for
a rare bayonet........................$89.95 BAY245
G-3 RIFLE BAYONET / DANISH
CONTRACT
Sleek original Danish G3 bayonet
which is also great as a fighting Knife!
Marked with Royal crown on hilt /
HMAK. Comes with scabbard
................................ $65.00 ECK003
BRITISH 1907 LEATHER
SCABBARD
Original scabbard for #1
MK3 blade bayonets (@18"
length) $24.95 BAY108
WW2 BERETTA 38 FOLDING
BAYONET
For use
with M38
submachine gun. Faithfully made from
an original.With scabbard. Very
hard to find .........$99.95 BAY24
M1 GARAND BAYONETS
Sarco has a limited quantity of M1 Garand Bayonets in both
original, and new/late production versions with blade lengths
from 6.5 to @ 16 inches, sold with, and without scabbards.
A. Original 10" Model 1943, Unmodified Bayonet w/
repro US scabbard.................................................... $64.95 BAY193
C. Original 10" Model M1905E1, Modified Spear Point
blade w/ repro US scabbard
................................................................................ $64.95 BAY194
DEAL: Buy One each, of the above 3 bayonets w/ scabbards
..............................................................................$174.95 BAY195
D. New Made 16” Model 1943 bayonet & scabbard
................................................................................ $29.95 BAY182
E. New Made 10” Model 1943 bayonet & scabbard................... $24.95 BAY183
F. Original M5A1 bayonet w/ M8A1 scabbard, GI
............................................................................................... $36.50 BAY189
ALSO….We have RARE M5A1 Garand bayonets marked KM5A1
............................................................................................... $59.95 BAY020
G. Original Korean Army version of the 1943/ 1905 blade shortened to their
requirement of between 6.5-7" length. These were imported from the military by
Arlington Ordnance years ago, and we have found a handful remaining in the
warehouse. Complete with original Korean short scabbard............ $49.95 BAY240
Also have a few original Korean scabbards by themselves...... $14.95 ea. BAY135
Go to our website for a full listing
ALLIED D-DAY FIGHTING KNIFE
Clever designs for fighting knives were applied
and issued to various units prior to D-day as
units waited for the invasion. One inspired
design during this period was made using the French cruciform Lebel
blade set within a knurled steel handle. Far sleeker than the British
Sykes, U.S. V42 stilettos, and M3 knives, this @7 inch blade was very
low profile and quick to penetrate any clothing or tissue which made
it ideal for sentry removal. Also, where a grinding wheel was available,
each of the 4 edges of the cruciform blade could be sharpened to assist
with slashing in hand to hand combat. A fantastic self-defense weapon!
New mfg, knife with scabbard......................................$27.95 BAY256
BAYONET GRIPS & SCREWS
BAY164 Original Yugo ’98 Mauser bayonet grip sets.$5.95, 3 for $14.95
LE3083 Original grips for Enfield #1MKIII (1907) bayonet..................$9.95
BAY163 Original new G.I. grip screws for 1903 Springfield & WWII Garand
bayonet....................................................... $3.95 ea., 4 for $10.00
BAY179 Original new grip set for the British #7 bayonet for the #4
Enfield..................................................................................... $12.95
BAY215 New original G.I. left grip for the M1905 Springfield bayo - Special
for that special bayonet............................................................ $45.00
Type 38 & Type 99 Bayonet w/Scabbard.
Faithful reproduction. $49.95 JAP178
This model has the desirable quillion
SPANISH FR8 MAUSER
BAYONET
Fits FR8 & CETME rifles.
Comes with scabbard............$24.95 BAY128
ENFIELD #5 JUNGLE ENFIELD
BAYONET
U.S. M6 LEATHER SCABBARD
JUST IN!
Steel reproduction scabbard for the
WW2 German K98 Mauser bayonet. Excellent
German style scabbard....... $12.95 BAY223
Original bayonet without scabbard.
........................................... $29.95 BAY01
ENFIELD #9 BAYONET
Original bayonet blade
with blood groove used
on the #4Mk1 rifle and
Sten MK5 SMG. Complete with scabbard.
.................................... $29.95 BAYO21
K98 BAYONET SCABBARD
Accurate new
made bayonet
with steel
scabbard for
use on the
Jungle Enfield & Sterling SMG
................................$39.90 BAY145
SKS SPIKE BAYONET, COMPLETE
Original and ready to install… $9.95 SKS03
CMP Garand M1 M1943 & M1 10" blade
bayonet repair kits, grips & screw, lever,
latch button & spring. All the missing parts.
These are nice repos – small quantity only.
We will use most for our own bayonets. May
require minor fitting – we fit ‘em!
...................................... $19.95 BAY199
1905 BAYONET PROJECT
Set of original and new
made parts for assembling a 1905 bayonet.
Years ago we had 2,000
blades manufactured
and rewelded onto
handles with great
success, allowing us
to sell 1905 bayonets again. Now we have a very
limited group of these complete sets of parts
remaining. The handles and hilts are from
original U.S. bayonets that were demilled by the
U.S. govt. Grips and internal handle parts and
blade are new mfg. Set of parts:.$24.95 each,
Or 10 for................................$199.50 BAY232
*Add a scabbard for........................ $9.95 ea,
or 10 for................................ $89.95 BAY233
M8A1 BAYONET SCABBARDS
M8A1 Scabbards to fit the following bayonets!
M5 & M5A1 Garand, M3 Trench Knife, M4 for M1 Carbine,M6 for M14 Rifle, M7 for M16
New Military Contract.............................................................................................. $17.95 ea
Excellent used military contract..................................................................................... $14.95
We have a small quantity of U.S. G.I. M8A1 scabbards. VG condition............................. $19.95
(Call Cholly for bulk purchases on M8A1 scabbard BAY083)
Original G.I. new M8A1 scabbard. Just found a few in the warehouse from the old days.
Has original USGI scabbard body.......................................................$24.95, 10 for $199.50
BAY083
BAY191
BAY040
BAY041
BAYONET FROGS
We have 4 leather historical bayonet Frogs for wearing on waist belts.
A. SWEDISH MAUSER - original good condition........ $5.95 MSR258
B. JAPANESE ARISAKA - late mfg, new, for Type 38 & Type 99
bayonets................................................................ $9.95 BAY115
C. YUGOSLAVIAN MAUSER - original good condition
.......................................................................................................... $7.50 BAY054
D. GERMAN K98 MAUSER - late mfg, new, fits WWII K98 bayonets......... $9.95 MSR111
E. SOUTH AMERICAN FROG WITH U.S. BRASS BELT HOOKS-Compact 4-inch
leather belt frog for bayonet & scabbard. Fits scabbards similar to Enfield
1907, K98 etc. Original VG condition military surplus
..............................................................................................$12.95 BAY258
U.S. M3 FIGHTING KNIFE
One of the finest WW2 fighting knives and truly, ‘no
frills’ with a utilitarian fighting blade and stepped
leather handle that provides a superior grip, even
by today’s standards. Knife w/ leather M6 scabbard
with markings. ............................................................. $29.95 BAY180
COLLECTORS BAYONETS
VARIOUS COLLECTORS BAYONETS & ACCESSORIES
WW1 GERMAN TRENCH KNIFE w/
‘BOOT’ SCABBARD
Late manufacture steel blade
& scabbard based on the
original trench knife.
Sleek & utilitarian for
use on belt or Boot!. Very
nice low profile 6" blade.
$39.95 BAY248
BRITISH STEN MKII SMG BAYONET
Rarely seen today as most were destroyed, this
bayonet fit over the barrel and provided the
same last ditch protection to the shooter as the
spike bayonet for the Lee Enfield. Simple to install, effective in use, and not
labor intensive to produce like a blade bayonet.................. $34.95 BAY246
BEAUTIFUL CURRENT PRODUCTION SCABBARDS FOR YOUR CMP
AND COLLECTOR BAYONETS
M3 scabbard for 16" M1942 bayonet.........$12.95,
3 for..............................................$35.95 BAY176
10" Garand scabbard...................................................$11.95 BAY175
SPECIAL RARE COLLECTOR M1 GARAND BAYONETS.
FEW ONLY AVAILABLE.
Turkish contract Korean War........................................................ $70.00 BAY226
Greek contract complete with original Greek Scabbard................. $74.95 BAY238
M5A1 Garand Bayonet with aluminum grips-with original m8A1 scabbard
............................................................................................ $75.00 BAY200
Original Norwegian Kongsberg M1 Garand bayonet 1954 issue (only 12 available)
......................................................................................... $150.00 BAY239
(SEE OUR WEBSITE FOR FURTHER DESCRIPTIONS AND INFORMATION)
ENFIELD #4 SPIKE BAYONET
Original bayonet for the Enfield
#4MK1 rifle and Sten MK5
SMG. Complete with scabbard.
.....................$12.00 BAY106
BAY031 SKS spike bayonet, stripped..............................................................................................$3.95
BAY125 Brown Bess Reproduction bayonet scabbard.....................................................................$9.95
BAY162 Nice repro of leather scabbard for the Trapdoor Springfield trowel bayonet – complete,
few only.................................................................................................................................. $24.95
ECK002 Swedish G3 Bayonet (3 crowns) with scabbard, new original – Few only......................... $65.00
BAY043 Perfect reproduction leather scabbard for 1941 Johnson rifle bayonet. Almost sold out –
can’t tell from original............................................................................................................ $29.95
BAY217 Rare find – found 15 only – M5 Garand bayonet with aluminum grips............................ $50.00
BAY172 New G.I. M16 bayonet in original, G.I. packaging............................................................ $34.50
M16 BAYONETS
Sarco is pleased to offer a selection of original USGI, foreign
military contract, and new mfg bayonets.
A. U.A.E. (United Arab Emirates) M16 bayonet
with black synthetic scabbard. UAE emblem on
handle and also on scabbard. New/unused.............................................. $34.95 BAY237
B. USGI M7 Bayonet in very good condition with M8A1
Scabbard................................................................................................. $29.95 BAY001
*Also have a small number of the M7 bayonet in
Excellent condition with ‘like new’ scabbard............................................. $32.95 BAY003
C. Econo M7 bayonet w/ scabbard – these are not mil spec, but fit
and look like the M7 bayonet and scabbard. New condition..................... $19.95 BAY229
D. M9 type bayonet w/ scabbard – A terrific rugged alternative to the very expensive GI issue
M9. Features a 7 Inch stainless steel blade sharpened to a razors edge with Sawback
edging on the opposite side. Also has a sharpening stone on the back and wire cutter
connection, and spare pouch on the scabbard. Also includes the quick release features on
the belt fastener and blade release.......................................................... $39.95 BAY219
1907 ENFIELD QUILLON BAYONET
Late manufactured steel blade and
leather scabbard as used in WWI and
even WW2 in North Africa. Differs from
the standard 1907 by way of the quillon connection to the muzzle ring. Classic old English style and looks great
on the rifle!...................................................................... $58.95 BAY244
I2
M1 CARBINE RECOIL CHECK
New, G.I. style “muzzle
brake”, clamps onto muzzle
of any G.I. M1 Carbine.
Designed
to reduce
recoil
50
Hilton
Street,
Easton
PA 18042
50 Hilton Street, Easton PA 18042
on the M-2 Carbine.
www.e-sarcoinc.com
/ www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
Marked “Check, Recoil M1”
610.250.3960onFax:
610.250.3961
bottom.$29.95
ea. CRB102
www.e-sarcoinc.com
M1 CARBINE FLASH HIDERS
M1 CARBINE
SPRING & PIN KIT
New, G.I. style flash hider,
clamps easily onto the muzzle
of any G.I. type M1 Carbine
Marked “Hider, Flash M3”
$29.95 CRB097
SPECIAL! Flash hider recoil check combo
$52.95 CRB132
All the pins & springs in a
M1 Carbine
$9.95,
3 for $27.95 CRB173
M1 CARBINE PARTS
CRB090 Banana Clip Pouch...................... $9.95
CRB023 Barrel Band 1st Model.............. $14.95
CRB036 Barrel Band Retaining Spring
................................................... $3.85
CRB025
Barrel Band w/Bayo Lug New, G.I.
Parkerized................................ $19.95
CRB093 Blank Adapter............................. $9.95
CRB002 Bolt Assembly & Disassembly Tool
................................................ $22.50
CRB096 Brass Deflector............................ $7.95
BRUSH-001Bronze bore brush 30 cal
............................................. 10/$9.95
CRB035 Buttplate (Nickel)...................... $10.00
CRB032 Buttplate (Used).......................... $8.00
CRB031 Buttplate Screw........................... $1.50
CRB094 Carrying Case........................... $17.50
CRB028 Demilled Front Reciever M1/M2
................................................ $12.50
CRB067 Ejector........................................ $4.00
CRB066 Ejector and Spring....................... $5.00
CRB068
CRB063
CRB065
CRB064
CRB069
CRB078
CRB080 CRB079
CRB082
CRB083
CRB184
CRB044
CRB046
CRB041
CRB042
Ejector Spring............................. $1.50
Extractor.................................. $12.00
Extractor Spring.......................... $1.25
Extractor Spring and Plunger
................................................... $3.50
Firing Pin................................. $17.50
Front Sight Key........................... $2.75
Front sight............................... $12.50
Front Sight Pin............................ $1.25
Gas Piston................................ $11.50
Gas Piston Nut............................ $6.00
Handguard rivets............ 20 for $5.00
Hammer................................... $17.00
Hammer Pin................................ $1.50
Hammer Spring........................... $2.50
Hammer Spring Plunger.............. $4.75
CRB099 M1A1 Carbine Forend............... $95.00
CRB100 M1A1 Pistol Grip Current Production
................................................ $19.95
CRB056 Mag Catch................................ $10.00
CRB058 Mag Catch Spring and Plunger
................................................... $3.25
CRB057 Mag Catch, late w/mag support
................................................ $10.00
CRB135
Mag Spring puttaway New G.I. M1
Carbine 15 rd ............................. $2.95
........................................... 3 for $5.95
CRB070 M1 Bolt, stripped...................... $59.95
CRB072 M1 Bolt, complete..................... $89.95
CRB167 M2 Carbine standard walnut Stock
................................................ $44.50
CRB062 M2 Trigger Housing.................. $80.00
OIL019 Oiler............................................ $4.95
CRB109 Orig G.I. Inland T-3 Carbine scope
mounting bar.........................$800.00
New & Made to the G.I. Print !
These are a very close copy of the
World War II M1 carbine case. Made
from the same type and color heavy
cotton O.D. duck, with proper brass
zipper and leather tabs, this case
is even “U.S.” marked, as were the
originals, carrying strap included.
Will hold all M1 and M2 carbines.
Ideal for storing or carrying your carbine; for reenactors and collectors.
New condition SALE!!
....................................$17.50 ea.
3 for...................... $47.50 CRB094
M1 CARBINE DUAL
CLIP HOLDER
$5.95 CRB101
M1 CARBINE PISTON NUT WRENCH
Available again................$12.95,
3 for..................... $34.95 CRB003
CARBINE TOOLS & ACCESSORIES
Blank Adaptor.........$9.95
Magazine, 15 shot, new
............................ $11.95
Tool, trigger spring removal
...............................$3.95
Bolt Assembly tool
............................ $22.50
NEW M1
CARBINE TOOLS
JUST IN!
CRB093
CRB010
CRB004
CRB002
NEW!
ITEM
A. Front sight
installation tool
..............$26.50 CRB174
B. Front sight removal tool
..............$26.50 CRB175
C. Receiver wrench with barrel
block set for barrel removal
and installation
..............$49.95 CRB006
SPECIAL – Set of all A, B & C tools
....................................$99.50 CRB176
D. Rear sight installation adjustment tool
....................................$79.95 CRB177
SPECIAL – Set of all A, B, C,
& D tools above
.....................$159.95 CRB178
Sorry tools are not returnable
M1 CARBINE MAGAZINE
DUST COVER
Original rubber dust covers back in stock after
many years! These are G.I. and
in excellent condition. They fit
easily over the top feed area of the
magazine.…
5 pcs. for........................... $4.95,
10 pcs. for.........................$7.95,
25 pcs. for........... $14.95 CRB095
Finally after decades of searching for M1 Carbine barrels worthy of consideration as a replacement on a GI issue Carbine,
Sarco has obtained brand new U.S. made barrels in 4140
steel that are completely machined, bored, properly cut with
inlets for the front sight, machined & swedged gas block/
piston, breech with proper hood not found on commercial barrels, and bore with a 1 in 20 twist! What better way to obtain
an M1 Carbine barrel with the true military GI profile! Barrels
are in the ‘white’, without finish. Finally you can be assured of
the perfect replacement barrel for your M1 Carbine.
NOTE: features of this barrel also include : USA MADE BY
NEW!
Short chambered .015
OLD SCHOOL
ITEM
BARREL MAKER
Heat treated 4140 (28-30 RC)
Gas Cylinder/Block made from 4140 steel, rolled and swedged
onto the barrel. These are NOT castings nor are they soldered
or welded onto the barrel, but made from forged bar, pressed,
swedged, and rolled into place as the original GI barrels were
prepared! This process alone, separates the quality of this
barrel over the competition! All of the quality steel, preparation, machining, and U.S. skilled labor involved to bring this
barrel to you…and we can still offer this at an amazing price!
Sarco’s special introductory price: $149.95 CRB183
M1 CARBINE RECEIVER DEMIL FRONT
Front 2" of a Carbine receiver ....$12.50 CRB028
Sheared rear end of a Carbine receiver – sheared in front of rear
sight base........................................................... $9.95 CRB179
Set of both of above............................................. $18.95 CRB180
We have M3 sniper scopes and
one super rare M2 sniper scope in
stock. Also new original G.I. parts –
Check our website or call MG Dave
M1 CARBINE SCOPE MOUNT
Installs in seconds with no special tools. No drilling
or tapping. Fits all G.I. or commercial carbine only
$11.95 $17.50 CRB103
Scope mount with 1” rings
$15.95 $22.50 CRB104
Special of the Month
Original military cartridge deflector
for M1 Carbine – fastens to top of
receiver w/wire form
“grippers” to deflect
NEW!
fired cases to right of
ITEM
gun – keeps ‘em out
of your line of sight.
New surplus.....................$7.95,
3 for...................$19.95 CRB096
ERMA EM1 PARTS AVAILABLE!
SEE OUR WEBSITE!!
M1 CARBINE SPRING KIT
A put-away special: slide
stop, recoil, extractor, ejector,
sear, hammer trigger, & mag
catch spring $14.00 value.
Only $6.95, 3 for $18.95
CRB137
NEW!
ITEM
3 for
This is absolutely the best
quality available
Check our website for new 15 & 30 round
Carbine magazines – In stock – GI pattern
CRB010 15rd magazine...................... $11.95
CRB008 30rd magazine...................... $14.95
Ordering instructions are in the ad or on our
website
(Gun Not Included)
Other Accessories Available: Carbine Stock Pouch $9.45
CRB134 Sling and Oiler $10.95 CRB088
Bulk buyers of this great stock, call Dave or Cholly.
M1 CARBINE SLINGS AND OILERS
50 sets for $349.50 ($7.00/set)
100 sets for $599.00 ($6.00/set) CRB088
OILER ONLY...........................................................$4.95 ea.
50 for................................................................... $149.50
100 for.......................................................$275.00 OIL019
SLING ONLY...........................................................$7.95 ea.
50 for................................................................... $300.00
100 for....................................................$350.00 SLNG005
Early WWII pattern Khaki color M1
Carbine sling..................................................... $9.95 SLNG006
M1 CARBINE MILLED
REAR COMBAT SIGHT
NEW!
ITEM
Back in stock $29.95 CRB154
M-1 CARBINE POUCHES
& MAGAZINE SETS
Individual pouches for sale as well as combination
sets with magazines. Every order with magazines
gets a free original USGI rubber dust cover with
each mag.!
1. CARBINE STOCK POUCH - holds
2-15 rd. magazines and slides onto
the wood stock. New repro. With
markings on front & back................ $9.45 or
3 for.......................................$24.95 CRB134
( pictured on Left )
2. CARBINE BELT POUCH - holds 2-15
rd. magazines and slides onto belt.
New, GI.................................... $8.00 CRB092
3. CARBINE BANANA CLIP POUCH holds 4- 30rd. magazines. Slides onto
belt...............$9.95 or 3 for $24.95 CRB090
( pictured on Right )
____________________________
4. COMBO A: 2- 15 rd. Magazines and
Stock Pouch w/dust covers
..............................................$29.95 CRB191
5. COMBO B: 2- 15 rd. Magazines and
Belt Pouch w/dust covers
..............................................$28.95 CRB192
6. COMBO C: 4- 30rd. Magazines and
Banana Clip Pouch w/dust covers
..............................................$69.50 CRB193
*Follow State & Local laws when ordering
magazines*
M1 CARBINE REAR
ADJUSTABLE SIGHTS
New condition
$17.50 CRB155
$149.95
$399.95
CRB098
SLING AND OILER SET $10.95 ea.
CRB104
CRB049
CRB050
CRB051
CRB015
CRB016
CRB017
CRB018
CRB088 SLNG006
SLNG005
CRB052
CRB043
CRB048
CRB053
CRB004
CRB038
Scope Mount w/Rings.............. $15.95
Sear............................................ $9.50
Sear with hump........................ $12.00
Sear Spring................................. $1.50
Slide M1................................... $65.00
Slide, G.I., late M2
................................................ $75.00
Slide Stop.................................... $2.95
Slide Stop Spring......................... $1.50
Sling and Oiler Set
................................................ $10.95
Sling Khaki (New Reproduction)
..................................................... $9.95
Sling O.D. (New Reproduction)
................................................... $7.95
Trigger...................................... $14.95
Trigger Housing Pin..................... $2.00
Trigger Pin................................... $1.25
Trigger Spring............................. $3.75
Trigger Spring Removal Tool
................................................... $4.85
Selector Spring............................ $4.00
WWII M1 CARBINE
LEATHER SCABBARD
This is a perfect and exact reproduction of the
WWII M1A1 Paratrooper Stock. Each stock
has a matching handguard, so your treasured
carbine will look beautiful.
(See website for other M1A1 Stock Parts)
ORIGINAL BOX OF 100 DUST COVERS
M1 Carbine fans will love this deal! Original G.I. cardboard box containing 100
pcs. of the rubber carbine dust cover
..................................... $25.00 CRB188
CRB142 Orig new G.I. M3 sniper scope battery
charging rack. Charges 8-10 batteries.
New G.I. in crate can ship UPS (136#)
.............................................$295.00
CRB014 M2 Potbelly stock, used G.I. walnut
................................................ $49.50
CRB154 Rear Sight, milled..................... $29.95
CRB155 Rear Sight, late stamped........... $17.50
CRB001 Recoil Plate.................................. $9.95
CRB030 Recoil Plate Nut........................... $2.75
CRB029 Recoil Plate Screw....................... $2.25
CRB020 Recoil Spring (Hi-Speed)
................................................... $4.50
CRB021 Recoil Spring Guide
................................................... $6.00
CRB022 Recoil Spring Housing (Early)
...................................................$22.50
CRB019 Recoil Spring Std......................... $3.75
CRB055 Safety (Flip Type)...................... $10.00
CRB059 Safety Spring and Plunger
................................................... $2.95
CRB103 Scope Mount............................ $11.95
OUR FAMOUS M1A1 PARATROOPER CARBINE STOCKS
AVAILABLE AGAIN !!
M1 CARBINE BARRELS
WWII PATTERN M1 CARBINE
CARRYING CASE
M1 CARBINE PARTS
& ACCESSORIES
Gun not included
These are truly Scarce as Hens Teeth!
For whatever reason there are very few of
these remaining on the collectors market
so we have thoughtfully had them made
from an original utilizing strong leather,
brass cover and correct fasteners, and
markings. This was used by Cavalry, on
motorcycles, jeeps, half-tracks etc. Originally made for the full stock M-1 Carbine,
it also fits similar sized firearms like the
Ruger® 10/22® with the Sarco stock.
Originals can fetch $400-$700. Sarco
brings this quality leather item to you at
the fabulous price of......$57.95 CRB189
ABRAHAM LINCOLN
16TH PRESIDENT
“In the end,
it’s not the
years in
your life
that count.
It’s the life
in your
years.”
M1 CARBINE PROJECT BARRELS
These are new barrels in process from the old
PMC Carbine Factory. Bought ‘em 30 years ago.
Just dug out of the warehouse. These are fully
profited and threaded but have no chamber or gas
block. Barrel is milled for front sight key slot
.................................................$29.95 CRB194
Your choice with gas port hole or without.
GEORGE
WASHINGTON
1ST PRESIDENT
"Be courteous
to all, but
intimate with
few, and let
those few be
well tried before you give
them your confidence."
ORIG WWII G.I. M1 CARBINE
KHAKI CLEANING ROD POUCH
New cond. Few only. WWII markings. Found
in the warehouse $9.95 CRB172
NEW FLAT (WWII STYLE) M1 FORGED
CARBINE BOLTS
Stripped $59.95 CRB070
Complete $89.95 CRB072
*Front sight key slot is milled.
Also have a small number of these barrels as
noted above, but with a non-military piston housing attached.............................. $39.95 CRB114
M1 CARBINE BANDS
First model barrel band assembly with
swivel and screw. Perfect for restoration of an early
WWII pattern carbine. New. Just bought a good deal
on 1st model M1 Carbine barrel bands and will pass
it on to you. Previously $20-$25 ea, now!!. $14.95,
3 for............................................. $39.95 CRB023
ITALIAN WW2 ‘SAMURAI’ MAGAZINE VEST
Another First on the U.S. market as Sarco brings you another ‘Kamabee Keep’
item that is as rare as ‘hens teeth’! The WW2 Italian Paratrooper canvas &
leather vest referred to as the ‘Samurai’ vest, was a staple of the 185th Parachute Division that was famous for their preparation of the invasion of Malta,
and importantly for the 2nd battle of El Alamein where they resisted 4 British
Infantry Divisions and 2 Armor Divisions thrown against them. Continued
their courageous stands at Monte Casino and after Italy capitulated, they
continued with the Germans as the 4th Fallschirmjager Division which fought
until May 1945. The entire time , they operated with this smart chest rig that held 5 Beretta M38
magazines on the front and 7 on the back along with 6 grenades on the waist pouches. This vest would
still be viable in todays military operations if you inserted body armor plates or Kevlar! Very comfortable and a brilliant design! It is applicable and useful with numerous other submachine gun magazine
like Sten, Thompson, MP40 etc. Normally repro versions although rare as well, are priced at several
hundred dollars for this version. We have a limited supply of these at an attractive price !
$125.00 MISC459
NEW!
ITEM
J2
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
SPRINGFIELD
PARTS &
ACCESSORIES
U.S. M1903 & 03A3 RIFLE PARTS
Note: Almost all of our Springfield parts are original, new G.I. bought 30-40 years ago.
See our website for 1903 Springfield Drill Rifle Barrels SPF271
1903A3 SPRINGFIELD HANGUARD
New manufacture! Spruce up that Springfield
with a new wooden 03A3 handguard with both
metal clips installed. You’ll be very glad when you replace your dinged, splintered, or
split handguard with our fresh stained replacement. Excellent quality $19.95 SPF377
1903 & 1903A3 SPRINGFIELD STOCKS
A. Good, may have arsenal repair, straight stocks................................................... $75.00 SPF118
B. Select, much better than A. Nicer finish. Only very minor or no repairs, straight stocks
........................................................................................................................ $125.00 SPF116
C. WWII scant stock (semi PG) V.G........................................................................ $125.00 SPF144
D. Composite Springfield drill rifle stock & handguard, exc cond
........................................................................................................................... $39.95 SPF257
E. Good cond composite stock and HG..................................................................... $29.95 SPF362
F. Rough composite stock and HG........................................................................... $19.95 SPF363
G. Original finger groove stock, good condition as # 118 above
........................................................................................................................ $145.00 SPF267
H. WWI straight grip finger groove, reproduction stock.......................................... $160.00 SPF251
I. Original new G.I. unissued walnut 1903 & A3 Springfield scant stocks – also
called semi P.G.................................... $199.95 SPF259 might have slight rusting on cross bolt.
SPRINGFIELD M2 .22 COMPLETE BOLTS
Few only, found in pile. VG to Exc. These
come with a new original correct copper
headspace jam screw – not installed…
$250.00 SPF216
See our website for all M1 & M2 .22
Springfield parts.
M1903 TRIGGER GUARDS
(NOT STAMPED 03A3 TYPE)
Absolutely beautiful repro of 1903 Springfield milled
trigger guard. Can’t really tell from original. Replace
the stamped ‘A3 guard in your rifle with one of these
beauties. Finished in matte black, stripped (no floorplate) $49.95 ea. SPF117, Complete assy – trigger
guard with floorplate & catch assy $69.50 SPF343
SPRINGFIELD 1907 SLINGS, LEATHER –
AS USED IN WWI & WWII
1.
2.
SLNG024 WWI Model 1907 Sling (w/ brass
hardware and WWI date)........$16.95 ea.
3 for.............................................$47.95
SLNG025 WWII Model 1907 Sling (w/ steel
hardware and WWII date).......$16.95 ea.
3 for.............................................$47.95
1903A4 Springfield Scope and
Mount available – See our website
1903 SPRINGFIELD CARTRIDGE BELT
$24.95 ea., 3 for $67.50 SPF146
1903 SPRINGFIELD
SPF001 Band Front Sight 1903............................$13.50
SPF002 Band Front Sight 1903A3........................$12.00
SPF253 Band Lower, new GI blue 1903................$25.00
SPF011 Band Lower (milled) 1903........................$20.00
SPF012 Band Lower w/Swivel (milled) 1903
...............................................................$23.95
SPF014 Band Lower w/Swivel (stamped)1903A3.......... $17.50
SPF018 Band Screw Upper Band 1903.................. $3.00
SPF019 Band Screw Upper Band 1903A3.............. $3.00
SPF263 Band & Hardware Set, milled 1903.........$54.95
SPF265 Band & Hardware Set, 1903A3....................... $49.95
SPF003 Base rear sight (not sleeve)......................$12.00
SPF306 Bolt, early smooth body, bent handle.......... $125.00
SPF374 Bolt, early smooth body, Nickel Steel.......... $200.00
SPF004 Bolt Late (complete).................................$42.00
SPF005 Bolt Late (stripped)..................................$20.00
SPF385 Bolt sleeve complete w/lock assembly & safety
...............................................................$26.95
SPF008 Bolt Sleeve (stripped)...............................$15.00
SPF009 Bolt Sleeve Lock........................................ $4.75
SPF010 Bolt Sleeve Lock Spring............................. $1.75
SPF384 Bolt sleeve w/lock & spring......................$19.95
SPF352 Bolt stripped & welded in firing pin hole
1903(A3)................................$3.95, 5 for $14.95
SPF351 1901 era, Springfield bolt body, smooth, not heat
treated.................................................. $300.00
SPF357 Bolt R marked for early Remington 1941-42,
stripped...................................................$65.00
SPF358 Bolt BF (Barney Forge) Springfield 1941 & 42,
stripped...................................................$45.00
SPF359 Bolt 1903A3 SA stripped for early A3’s
................................................................$45.00
BRUSH-001 Bronze bore brush 30 cal................. 10/$9.95
SPF091 Butt Swivel (milled) 1903........................... $6.50
SPF061 Butt Swivel (stamped) 1903A3................... $5.00
SPF016 Buttplate (milled) 1903(used)...................$20.00
SPF291 Buttplate New G.I. milled 1903................$30.00
SPF015 Buttplate (stamped) 1903A3 used............$15.00
SPF121 Buttplate Milled fine checkered
...............................................................$34.95
SPF257 Springfield Composition Drill Rifle Stocks,
G.I., used, VG-Exc...................................$34.95
SPF020 Cutoff....................................................... $8.50
SPF021 Cutoff Plunger........................................... $2.00
SPF023 Cutoff Screw............................................. $2.00
SPF024 Cutoff Spindle........................................... $3.50
SPF022 Cutoff Spring............................................ $1.50
SPRINGFIELD RIFLE
ACCY. SET
NEW!
ITEM
Canvas roll up pouch
with original spares
like extractor, ejector
& pin ,striker, front
sight hood, 3 blade
combo tool, pull
through cleaning jag,
tub of gun grease, oiler, and a new .30 cal.
bore brush. Terrific maintenance items to
keep your Springfield Rifle running well
......................................$36.95 SPF389
GRENADE LAUNCHING
SIGHT JIG FOR 1903
SERIES
NEW!
ITEM
Springfield Rifles
and M1 Carbines
Original U.S. WW2 metal sight jig for
setting the M15 grenade launcher sight
correctly in Springfield and M1 Carbine
stocks.............................$25.00 SPF390
SPRINGFIELD HANDGUARDS
BRAND NEW!! SPRINGFIELD 1903A3 BARRELS
NEW!
EM
IT
Yes we just received a shipment of high quality 4140, 4 -groove barrels with shallow chamber,
extractor cut, front sight cut out for base, with a 1 in 10 twist. We had these made with a shallow
chamber (.044") to accommodate for receiver variations. In the white and unmarked!
................................................................................................. $135.00 SPF387 (Very Limited Availability)
ORIGINAL 1903 & A3 SPRINGFIELD STOCK
FRONT ENDS – removed
from original G.I. stocks.
These are cut just behind the band – you can
use these to fix your Springfield stock with a
buttered front end. Glue it under the lower band
so you cant see it. We cut ‘em off years ago.
We’re using them too..........................$34.95,
3 for...................................... $100.00 SPF372
CHROME SPRINGFIELD PARTS
SEE OUR WEBSITE
COMPLETE HARDWARE SET FOR
1903A3 SPRINGFIELD
Same list as parts to the left only 1903A3
late pattern. Value $55.00
Special $49.95 SPF265
1903 SPRINGFIELD LOW
SCOPE SAFETY ASSY
$14.30 SPF054
1903A3 PIN & SPRING KITS
All the pins & springs in a Springfield rifle – 03 &
A3 included $9.95, 3 for $24.95 SPF341
1903 SPRINGFIELD REAR SIGHT PARTS
SPF143 Screw, windage.......................................* $7.50
SPF094 r ear sight, complete without windage screw w/o
barrel ring, VG to Exc............................ $39.95
SPF264 R
ear sight complete w/windage screw & w/o
barrel ring........................................... $44.95
SPF273 1
903 sight base (around barrel).............. $45.00
* Above parts are new. Check our website for all other
‘03 sight parts
1903A3 SPRINGFIELD DRILL RIFLE BARRELS
These were removed from drill rifles & have their
chambers welded or have a rod in the barrel with
a small plug weld to hold it in. Front sight base
not included................................... $12.50 ea,
10 for..................................................$99.95,
50 for.....................................$400.00 SPF270
BRAND NEW 1903A3 SPRINGFIELD REAR SIGHTS ASSEMBLIES
Forgot we had ‘em................. $29.95,
3 for.......................... $84.95 SPF370
Original G.I. A3 rear sight new in wrap
................................. $50.00 SPF065
Original G.I. A3 rear sight used VG
................................. $40.00 SPF294
Check our website for A3 Sight Parts Have all parts
NEW GI SPRINGFIELD BARRELS
1.New G.I. 4 groove 1903 Springfield barrel, dated
1943. 1903 front and rear sight bases were added
as a modification for use as a 1903.
.................................................... $269.95 SPF386
2. M1903A3, New, G.I., 2 groove...... $199.00 SPF080
3. M1903A3, New, G.I., 4 groove...... $229.00 SPF130
M1903 & 03-A3 “SPRINGFIELD” RIFLE KITS
BORE CLEANING BRUSHES
.30 caliber brass bore brushes, new.
$9.95/10 • $39.95/50 •
$69.95/100
BRUSH-001
SPRINGFIELD STRIPPER CLIPS
Early brass WWI......................$4.00 ea,
5 for.................................$14.95 STC025
1903 SPRINGFIELD GRENADE
LAUNCHING BOOTS
A perfect reproduction of the
grenade launching rubber
boot (slip on) for the Springfield and M1 Garand. Absolutely meticulously beautiful!!
........................$34.50 MISC088
SPRINGFIELD PUT AWAY KIT 1/2 PRICE!
Trigger, 2 sears, 1 milled follower, 2 ejector, 2 strikers, 1
mainspring, 2 trigger pins, 1/2
price special. $15.80 SPF095
NEW!
ITEM
EXTRA LONG REAR GUARD SCREWS
FOR 1903A3 RECEIVERS
The standard guard screw only goes up part way
in an A3 receiver. This screw fills the hole to make
your rifle more attractive. Haven’t had these for 20
years. The G.I. screws only engages a few threads.
$3.95 ea, 3 for $9.95 SPF360
Original G.I. walnut handguards.
M1903, New, unissued
............................................ $14.95 HNGD01
1903A3 used cracked repairable
10 for..................................... $59.95 SPF261
1903A3 plastic for drill rifle.... $15.00 SPF043
1903A3 used good................ $14.95 HNGD03
1903A3 used VG-Exc ............. $19.95 SPF089
1903 handguard Type 2 (1910 to 1916)
.......................................................$150.00
1903 handguard NM........................$100.00
A put-away for the future all springs in the
gun – bolt sleeve lock, main, cut-off, sear,
floor plate catch, & magazine follow $15.00
value – Only.................................... $4.45,
3 for................................. $11.45 SPF248
SPF342 Die cast buttplate assemblies for 1903
Springfield - looks like a milled buttplate (new
orig). Super rare! Collector’s dream
................................................................. $35.00
SPF309 Early ‘03 bolt stop, new orig. G.I..............$16.00
SPF028 Ejector...................................................... $5.00
SPF029 Ejector Pin................................................ $2.00
SPF025 Extractor.................................................$14.95
SPF027 Extractor Collar.......................................$10.00
SPF026 Extractor w/ Hole....................................$16.50
SPF033 Floorplate (milled) 1903...........................$14.95
SPF034 Floorplate Catch Assembly........................ $8.75
SPF031 Follower (milled) 1903.............................. $7.00
SPF030 Follower (stamped) 1903A3.....................$10.00
SPF032 Follower Spring......................................... $4.00
SPF036 Front Sight Base Pin................................. $1.50
SPF035 Front Sight Blade 1903............................. $6.00
SPF333 Front sight blade 1903A3.......................... $5.00
SPF044 Front Sight Cover....................................$12.95
SPF093 Front Sight Key 1903A3 ........................... $2.25
SPF037 Front Sight Pin.......................................... $1.50
SPF039 Front Sight Screw 1903 ............................ $2.75
SPF038 Front Sight w/Stud 1903 ......................... $9.95
HNGD01 Handguard 1903 (new G.I.).....................$14.95
HNGD37 Handguard 1903 used cracked repairable
.........................................................10/$39.95
SPF084 Handguard Clips (Two Packs).................... $3.85
SPF043 Handguard Plastic (New) 1903A3 ............$15.00
SPF347 Lower band assy w/swivel, used orig
Remington 1903......................................$47.50
SPF348 Lower band screw, new 1903..................... $1.95
SPF349 Lower band screw, new 1903A3................ $1.95
SPF046 Mainspring................................................ $4.00
SPF339 1903 MKI Orig Sear & Trigger Assembly (for
Pederson Device).................................. $125.00
OIL035 Oiler, late plastic WWII, new....................$13.95
OIL015 Oil and Thong Set (Metal)........................$35.00
OIL016 Oil and Thong Set (Plastic) Used
................................................................. $8.50
SPF094 1903 rear sight assy with windage screw without
barrel ring...............................................$39.95
SPF143 1903 rear sight windage screw................$12.00
SPF273 Rear sight band 1903 (Orig)....................$45.00
SPF370 1903A3 Rear sight, perfect repro.............$36.50
SPF371 1903 Rear sight complete assembly w/base &
windage screw (barrel ring not included).$49.95
SPF294 1903A3 Rear sight G.I. used....................$40.00
SPF065 1903A3 rear sight in wrap, Original G.I. new
...............................................................$50.00
SPF049 Springfield Ring, Handguard to Receiver
1903A3..................................................... $6.00
SPF053 Safety Lock............................................... $8.00
SPF054 Safety Low Scope Type............................$16.50
SPF086 Screw Buttplate Large............................... $2.50
SPF085 Screw Buttplate Small............................... $1.75
SPF092 Screw Stacking Swivel 1903...................... $2.00
SPF056 Screw Trigger Guard Front........................ $3.00
SPF057 Screw Trigger Guard Rear......................... $3.00
SPF074 Screwdriver Three Blade............................ $9.95
SPF055 Sear.......................................................... $7.50
SPF072 Sear Pin.................................................... $2.00
SPF062 Sear Spring............................................... $2.00
SPF266 Set of G.I. Milled Trigger Guard, Floorplate,
Floorplate Catch Assy..............................$99.95
SLNG067 Sling keeper, ¼” for 1907 sling, orig, new GI
...................................... $5.95 ea, 2 for $9.95
SPF013 Sling Swivel for Band (milled) 1903
................................................................. $7.50
SPF067 Spring Band Retainer (milled)..................$14.50
SPF066 Spring Band Retainer (stamped)................ $4.00
SPF058 Stacking Swivel and Band (exact reproduc
tion) 1903A3 ..........................................$15.00
SPF350 Stacking swivel screw 1903A3................... $2.00
SPF068 Stacking Swivel Used G.I. (milled)1903
..................................................................... $9.50
SPF366 Stacking swivel and band assembly, 1903A3 G.I.
used........................................................$18.00
SPF367 Stacking swivel 1903A3 G.I. new............... $6.00
SPF335 1903A3 stamped replacement rear sight. Perfect
for drill rifles............................................. $5.95
3 for........................................................$14.95
SPF113 Stock cross bolt & nut............................... $9.65
SPF090 Striker...................................................... $7.40
SPF052 Striker Rod............................................... $6.00
SPF051 Striker Sleeve............................................ $3.00
SPF076 Trigger Grooved.......................................$13.95
SPF077 Trigger Pin................................................ $1.50
SPF075 Trigger Plain............................................. $9.95
SPF368 Trigger guard, 1903A3 used G.I.............. $32.00
SPF382 Trigger guard, 1903A3—Reparked.......... $36.00
SPF117 Trigger Guard 1903 type, Milled
...............................................................$49.95
SPF078 Trigger Guard 1903, Orig GI....................$95.00
SPF079 Trigger Guard (stamped) 1903A3
...............................................................$31.50
SPF083 Upper Band (stamped) 1903A3................$16.00
SPF082 Upper Band New (milled) 1903................$30.00
SPF081 Upper Band Used (milled) 1903...............$20.00
1903 & A3 SPRINGFIELD SPRING KIT
These kits consist of every part of the “Springfield”
rifle except the stock, receiver, and barrel assy. (w/sight bases).
Kits will have bolts, bands, stamped trigger guard, swivels, trigger,
etc. Use these kits to build up to a rifle on your receiver or to rebuild an old ‘03.
All parts are in new or like new condition.
M1903 KITS
A. Parts kit includes new handguard..$159.95 ea. SPF127
M1903A3 KITS
A. Parts kit.........................................$149.95 ea. SPF126
C. For a new G.I. 2 groove 03A3 barrel add........ $190.00
Barrels only sold at this price with kit purchase.
Note: Rear sight parts may be used G.I.
FALL SPECIAL!!
Add a new Springfield stock & handguard set to
either Springfield kit (1903 or 1903A3) for only:
1903........................................ $149.00 SPF380
1903A3.................................... $159.00 SPF381
Price only good with a Springfield kit purchase.
CLEANING RODS FOR
RIFLES, PISTOLS & MG’S
CLN039 .22 cal 3 pc M16 or Galil (or other) cleaning
rod – round swivel handle (Israeli G.I.)
.................................................................. $3.95
CLN013 98K Mauser,10".................................$12.00
CLN014 98K Mauser,121⁄2".............................$12.95
CLN023 AK47................................................... $9.95
CLN026 Brazilian Mauser M1908....................$12.50
CLN032 Browning M1922 .32 Pistol.................. $2.95
CLN016 G33/40..............................................$14.95
CLN015 G43/K43...........................................$14.95
CLN025 GEW 98, 15" WWI..............................$12.50
CLN007 M10 Set for the M1 Garand................$12.50
CLN030 M16, 4 Piece Rod................................. $8.95
CLN033 S&W .38 Military................................. $2.95
CLN021 Swedish M1938 Rifles........................$12.50
CLN028 Thompson, Brass...............................$12.50
CLN027 Thompson, Steel.................................. $5.00
CLN018 VZ24 Mauser.....................................$13.50
CLN049 M93 Mauser......................................$10.00
CLN129 M95 Mauser......................................$13.50
CLN127 Turkish ’98 Mauser Model 38................ $11.95
SKS032 SKS original.............................................$9.95
CLN130 SKS 59/66 original............................... $12.00
CLN052 Uzi original...............................................$5.95
CLN022 Carcano Carbine, 2pc, original.............. $12.50
CLN132 M44 Finnish Mosin original................... $13.95
N91030 Mosin Carbine 1907 original................. $16.95
CLN133 Mosin Carbine 38/44 original................ $14.95
CLN045 Arisaka Type 99 Standard repro............ $16.95
CLN044 Arisaka type 99 Long rifle repro............. $17.95
FND011 FND sectional....................................... $15.00
CLN123 Beretta M38 SMG.................................. $14.95
CLN024 1891 Argentine Mauser......................... $10.00
CLN024 1909 Argentine Mauser......................... $10.00
CLN129 Chilean model 1895 rifle rod original...... $13.50
CLN131 Chilean 1935 Original............................ $25.00
CLN036 Carol Gustav SMG rod..............................$9.95
CLN128 36" One pc. .30 cal G.I........................... $13.95
CLN134 Steyr M95.............................................. $15.00
CLN046 Arisaka Type 1 & 2 Paratrooper rod....... $17.50
CLN147 Arisaka Transitional 99 rod, 4-7/8”....... $12.00
JAP3803 Arisaka Type 38 Long rod..................... $17.95
CLN148 Arisaka Type 38 Short rod..................... $17.50
CLN008 Arisaka Type 38 Carbine rod.................. $19.95
CLN149 RPD Cleaning Rod.................................. $14.95
1903A3 TRIGGER
GUARD ASSEMBLIES
A brand new complete assembly –
trigger guard + follower + spring + 2
screws -$51 value $39.50 SPF375
Complete assembly, used surplus - $51.50 value...
$39.50 SPF376
Trigger guard only, brand new..... $31.50 SPF079
Trigger guard, used G.I................ $32.00 SPF368
SPF344
SPF016
SPF015
SPF121
SPF342
SPF353
SPF355
1903 & A3 SPRINGFIELD
BUTTPLATE COLLECTION
New G.I. milled.................................. $30.00
Used milled buttplate........................ $18.00
Standard A3 used............................. $12.00
Milled fine checkered......................... $34.95
Original G.I. die cast buttplate.......... $39.95
Hand select Smith Corona buttplate
A3, used............................................ $29.95
G.I. stippled armorer match milled
buttplate........................................... $30.00
COMPLETE NEW SCREW SET FOR 1903 &
1903A3 SPRINGFIELD Includes:
Upper band screw
Rear guard screw
Front guard screw
3 Small buttplate and
Large buttplate screw
swivel screws
Stacking swivel screw
Cut off screw
Lower band screw
Note: the 1903 kit also includes the front sight screw
(value $23.00) SPF378 – screw set for 1903A3
.......................................................... $11.95
(value $26.00) SPF379 – screw set for 1903
.......................................................... $13.95
CMP SPRINGFIELD DRILL RIFLE
REPAIR KITS
All the missing or destroyed parts. Cut off,
Front sight, Cut off spindle, Bolt body, Cut
off plunger, Striker (firing pin), Cut off spring,
Stamped drill rifle rear sight $61.40 regular
value – Sarco Value..........................$34.95
3 sets for........................................$99.95,
10 sets for.........................$250.00 SPF361
03A4 SNIPER SCOPE MOUNT BASE
Late production military scope mounts for the 03A4
sniper rifle. Parkerized steel, unmarked. Will accept
Redfield rings (not included) $44.95 SPF136
U.S. SPRINGFIELD 1903 & 1903A3 “TYPE C” FULL PISTOL
GRIP STOCKS
FALL SALE ON C STOCKS!
These stocks will fit on the 1903, 1903A1 and the 1903A3. These will also fit on
your 1903A4 sniper rifle with small inletting for the bolt handle and is also correct
for the national Match rifle.
This stock was standardized in 1928 by the army for all Springfield rifles
going forward and was issued on all National Match rifles.
Crossbolt & nut included but not installed.
Guard screw bushing included
.............................................................. $179.95 $149.95 SPF276 (stock only)
Stock with new 1903A3 handguard.......................... $199.95 $169.95 SPF278
Stock with new original G.I. 1903 Handguard.......... $189.95 $159.95 SPF277
Hardware not included.
While these are truly “drop in stocks” we cannot guarantee proper
installation as it is beyond our control. Minor variations
occur in Springfields
P17 & P14 ENFIELD
GOODIES
!! ONCE AGAIN AVAILABLE !!
A small lot of P14 (1914) Enfield Extractors – We thought these were gone forever!
P14004 P14 Extractors original...$39.95
P14002 P14 Bolt complete..........$99.95
U.S. 1917 ENFIELD CUSTOM COCK
ON OPENING & SPEED LOCK ASSY
Has a modified cocking piece & hi speed lock spring –
mounted on a new firing pin.............$39.95 P17051
Also available for P14.......................$40.00 P14010
U.S.M1917 & BRITISH P-14 ENFIELD PARTS
Almost all parts are new G.I.
P14003 P14, Bolt Stripped.............................$32.00
P14002 P14 Bolt, complete............................$99.95
P14004 P14 Extractor, original.......................$39.95
P17082 P14 Firing pin spring........................... $4.95
P14007 P14, Floorplate.................................... $9.00
P14009 P14, Follower, Milled........................... $8.00
P14008 P14, Magazine Box............................$11.50
P14010 P14, Speed Lock................................$40.00
P14013 P14, Stock and handguards with grenade
launcher sight plate—4 only.... $195.00 ea.
P14005 P14, Striker (Firing Pin).....................$20.00
P14006 P14, Triggerguard..............................$15.00
P17016 Bolt Complete....................................$75.00
P17017 Bolt, stripped....................................$37.50
P17068 Bolt stop assy, 4 parts w/o ejector.....$15.00
P17041 Buttplate Assembly...........................$14.95
P17040 Buttplate Screw Large......................... $3.50
P17056 Buttplate Swivel Screw........................ $4.00
P17012 Ejector, original.................................$16.50
P17043 Extractor...........................................$24.50
P17034 Front guard screw............................... $3.50
P17036 Floorplate .........................................$10.00
P17038 Follower Spring................................... $5.00
P17039 Follower, Milled.................................$12.00
P17006 Handguard Ring................................$10.00
P17082 High speed firing pin spring................. $4.95
P17054 Lower Band Asembly.........................$10.00
P17083 Lower Band new, original..................$15.00
P17037 Magazine Box...................................... $9.95
P17035 Rear Guard Screw............................... $3.50
P17004 Stacking Swivel................................... $9.50
P17052 Stacking Swivel Screw......................... $4.00
P17018 Striker (Firing Pin).............................$18.00
P17031 Triggerguard.....................................$20.00
P17053 Upper Band......................................... $9.50
P17046 Rear handguard walnut new G.I........$35.00
P17047 Rear handguard walnut used G.I.......$25.00
P17062 Rear handguard hardwood, new G.I..$25.00
P17063 Rear handguard hardwood, used G.I.$20.00
P17044 Front handguard walnut new G.I.......$22.00
P17045 Front handguard walnut used G.I.....$18.00
P17061 Front handguard hardwood, new G.I.$17.00
P17060 Front handguard hardwood used G.I.$15.00
See our website for all other P17 & P14 parts
Check our website for parts list for
the Mitchell AR, AK & Galil .22!
SPECIAL! JUST IN THE DOOR
High speed P17 or P14 Enfield firing pin spring.
Speed up your lock time same as used on our
speed lock assembly....................... $4.95 P17082
K98 MAUSER SPARE PARTS KIT
Been out of these for
a while. Now’s a great
time to pick up a pack
of these original parts
before they are gone
again! Contains:
EJECTOR, FOLLOWER, MILLED, TRIGGER
SEAR, SAFETY, FOLLOWER SPRING, SEAR
SPRING, BOLT SLEEVE, FIRING PIN, FIRING
PIN SPRING $29.95 MSR370 VALUE $65.00
RARE RIFLE STOCKS
HKR001 New original Hakim stock................. $175.00
FN49001FN 1949 .30-06 cal Good condition - will
rework well (we did one) – Complete with handguard set (not returnable)....................$75.00
FN49078FN49 .30-06 stock & handguards reworked in
our shop (this is a reworked #4)........ $125.00
SPF254
Bannerman Springfield stock model 1937
........................................................ $200.00
STK004
Remington model 1934 military rifle good
........................................................ $200.00
STK339 New original stock for Norinco JW15 .22 bolt
action clip fed rifle...............................$19.95
P14012 P14 Enfield stock w/handguards...... $149.50
P17044
P17, Front handguard new walnut......$19.95
P17045
P17, Front handguard used walnut.....$14.95
P17061
P17, Front handguard new hardwood..$20.00
P17060
P17, Front handguard used hardwood$17.00
P17046
P17, Rear handguard new walnut........$26.50
P17047
P17, Rear handguard used walnut.......$19.95
P17062
P17, Rear handguard new hardwood...$19.95
P17063 P17, Rear handguard used hardwood...$16.75
MSR549 Steyer 1912 (98 Mauser) Rifle Stock, good
condition.............................................$49.95
MSR366 1908 Brazilian long rifle stock good cond.
...........................................................$24.95
MSR366A A– Select (very few only) 1908 Brazilian
long rifle stock.....................................$75.00
MSR375 1908 Brazilian long rifle stock with handguard..................................................$39.50
MSR466 Select 1908 stock with handguard.......$85.00
MSR548 Steyer M1912 (98 Mauser) stock w/buttplate &
bayo lug..............................................$49.95
STK341 Stevens 416 .22 TGT stock VG used, orig
............................................................$50.00
STK342 Stevens 416 .22 TGT stock w/buttplate, new
orig......................................................$75.00
STK343 Remington 513T target rifle used VG – low comb
............................................................$25.00
STK344 Winchester G.I. model 75 target rifle, used VG
............................................................$35.00
STK345 Mossberg144 used exc.........................$35.00
STK346 Mossbert 144 used exc with “National Board
For The Promotion Of Rifle Practice” mblem on
the stock, used VG...............................$50.00
MAUSER PARTS
& ACCESSORIES
MAUSER “20” ROUND “TRENCH” MAGAZINE
During the trench warfare of WWI, the
Germans developed these magazines to
increase the firepower of their 98 Mausers. Easily installed in any GEW. 98 rifle
by merely removing the floor plate from
the rifle’s trigger guard, and replacing it
with the trench magazine. Original trench
magazines are very rare and valuable.
We now have this quality reproduction
identical to the originals right down to the
proof marks! Will also work in 98K, Kar
98a, Vz 24, and most M98 style Mauser
rifles. Blued steel, complete with follower,
spring and follower retainer with chain.
Available Again
$74.95 MSR167
ORIGINAL NEW COMMERCIAL FN
MADE (FROM THE 60’S)
Note: These are original FN milled from
BAR stock – current offerings are castings.
Finally available again,
hooded bolt sleeve for use
with trigger mounted safety
mechanism. These are the
type used on all of the high
quality Mauser sporters. Our
sleeves are original F.N./Belgium manufacture, left
over from their production of Mauser Sporters several decades ago. We found a small cache of these
desirable hooded bolt sleeves at the FN plant and
bought them all. All are beautiful polished steel,
new condition...................... $34.95 each MSR119
MAUSER 98K WWII STYLE SLING
This sling has been most
carefully designed to duplicate the
original World War II German slings in every
detail. We have used a nice grade of dark brown
leather with the proper crossweave design. The
sling attachments have also been properly stitched
and crafted to duplicate the originals. These slings
have even been stamped with a wartime producer’s
code, date and eagle with Waffenamt marking.
$14.95, 3 for $39.95, 10 for $120.00
K98 GERMAN STYLE MAUSER SLING with German
WWII markings - New mnfr. $14.95 SLNG011
NEW MAUSER 98K REPRODUCTION SLING
NICE REPRO OF K98 MAUSER SLING BUCKLE
Finally got these in stock
$4.95 ea, 3 for $11.95 SLNG081
MAUSER BOLT COLLECTION
We have over 30 variations of
Mauser bolts for your particular
Mauser – Check our website for the
full list of available bolts
98 MAUSER TACK DRIVER
HEAVY BARRELS
We took some of our fabulous Swedish 8mm
heavy barrels blanks – had them threaded for
98 Mauser actions. These have a nice heavy
profile and are 1 3/16" at chamber and 15/16"
at muzzle. Length is 22 3/8". Our barrel maker
commented “I would be proud if I made a barrel
of this fine quality” – These are fully chambered
but of course still need to be headspaced by a
competent gunsmith................. $79.95 MSR553
PLEASE NOTE:
These barrels have a slightly deep chamber for a
reason. If you have a shallow chamber, you will
need to use a chambering reamer to adjust headspace. With this method you can adjust head
space by turning back the shoulder and breech
a bit to accommodate the headspace dimension.
This also solves any variance from the chambering reamers pilot and the throat dimension in the
reamer. No need to buy a chambering reamer.
SEE OUR WEBSITE FOR THE FULL
SELECTION OF ‘98 MAUSER PARTS
MSR104
Band Retaining Spring, front GEW 98
........................................................... $4.00
MSR105
Band Retaining Spring, rear GEW 98.$4.00
MSR106 Band Spring (98K)............................. $7.00
MSR096
Barrel KAR88 Orig Used 8x57 171⁄2" small
ring.................................................$50.00
MSR304 Barrel, Verguiero 8x57mm 23-3/4” Small
Ring, New........................................$75.00
MSR097
Barrel KAR88 Original (hand picked bores) 8
x 57MM 17 1/2" small ring................$75.00
MSR114
Bolt (complete) turndown handle.. $125.00
MSR115
Bolt (stripped) turndown handle......$75.00
MSR117 Bolt Sleeve (new).............................$12.00
MSR118 Bolt Sleeve (used).............................. $8.00
MSR120 Bolt Stop (stripped)........................... $7.00
MSR121 Bolt Stop Assembly.........................$17.50
MSR359 Bolt Stop for 1909 Argentine stripped
.......................................................$14.95
MSR434 Bolt Stop Screw, new......................... $2.00
MSR122
Bolt Stop Spring..............................$12.00
MSR404 Bolt stripped, straight handle..........$43.50
BACK AGAIN!! NEW PRODUCTION ‘98 MAUSER FIRING PINS
M2
We just produced these out of the best
4140 steel - The good news is that we
redesigned the cocking piece knotches to
fit multiple manufacturing variations of the cocking piece. For years we have suffered
pins and cocking pieces that wont fit together and hours and hours of sorting for fit.
Problem solved + a new 4140 pin......................................................$22.50 MSR431
’98 MAUSER SPORTER
RIFLE PARTS
Steel hinged trigger guard
$69.95 MSR326
Single stage trigger & sear
assy. Note this single stage
trigger & sear takes the creep
out of your trigger pull.
$6.50 ea. MSR205,
3 for $18.95
Low scope safety – for
scope mounting on 98 Mauser scoped
Sporter. Fits & works on standard military
bolt sleeve $17.75 MSR162
NEW ARRIVALS! RARE ’98
CONTRACT MAUSER SLINGS
Mauser Portuguese 1904, Verguiero
................................. $14.95 SLNG013
Brazilian M1908 detachable Sling Swivel
..................................... $8.50 MSR324
Proper parade sling loop for Brazilian
1908 to go with the butt swivel above
..................................... $4.00 MSR193
Set of above MSR324 & MSR193, only
..................................... $9.95 MSR415
Orig brand new Spanish Mauser Model
1893 & M1916 rifle sling
................................. $12.95 SLNG058
A GREAT BUY ON SELECT
NEW MAUSER ‘98 SPORTER
BARRELS
FROM A MAKER OF HIGH END MAUSER
SPORTING RIFLES (HE CHANGED PRODUCT LINES SO WE GOT THE BARRELS)
These barrels are custom produced
from the highest quality Swedish steel.
Nothing but the absolute best. Do to
our fabulous buy we can pass the savings on to you. Fits all ‘98 Mauser actions. Barrels are shallow chambered so
they can be head spaced to your action.
Compare price at $235.00 to
$255.00
Barrel dimensions: Length 217⁄8"
Muzzle diameter 5/8"
shoulder diameter 118⁄ "
Special prices cal .30-06 $64.95,
3 for $178.95 MSR350
‘98K MAUSER ACCESSORY KIT
Cleaning rod, Our famous K98 Repro
sling, front sight hood. Value $55.00
Sarco Special $24.95 MSR365
MAUSER RIFLE CLEANING RODS
1. 98K 12.5 inch rod, for most 98K
and G-43 rifles................ $12.95 ea. CLN014
2. 98 K 10 inch, for early 98K
.............................................. $12.00 CLN013
3.G33/40 Rod, Special length rod used only on
the Czech Mountain carbines made by the Germans as the G33/40.............. $14.95 CLN016
4.VZ24 Rod, Correct length and diameter rod for
the Czech VZ24 rifles. Also correct for G24 (T)
rifle........................................ $13.50 CLN018
5. Chamber cleaning tool, wood.....$3.95 CLN084
6. 121⁄2” rod for M98/43 Spanish$12.50 CLN019
7. Cleaning rod M93 171⁄4"...........$10.00 CLN049
8. Cleaning rod – Turkish model 38 Mauser
& M98....................................$11.95 CLN127
9. M95 Mauser Chilean rifle........$13.50 CLN129
10. Argentine M91 & M1909 Mauser....$10.00 CLN024
11. 1916 Spanish short rifle..........$12.50 CLN136
12. Chilean M1935 short rifle........$25.00 CLN131
13. Swedish M1896 rifle.................. $8.00 CLN020
14. Swedish M1938 carbine..........$12.50 CLN021
15. Brazilian M1908 Mauser.........$12.50 CLN026
16. GEW 98 Mauser WWI..............$12.50 CLN025
BRAND NEW ORIGINAL 98
MAUSER STRAIGHT BODY
STRIPPED BOLTS
Just in the door as I am writing this. The
original FN production. These came out of
the FN Factory in a buy of left over parts
in the warehouse. Unnumbered. Never in a
gun. $49.95 MSR517
Extra Special – our new ’98 bolt a new
extractor and a new firing pin
......... $79.95 MSR518
MAUSER RIFLE BARRELS
VARIOUS MODELS
1.Kar 88, 8x57, original used, with
good bores. 171⁄2"
.............................$50.00 MSR096
with hand pick bores.......... $75.00
2.K98 Mauser barrel – rough bore
.............................$24.95 MSR424
3.Rare Argentine M1909 Engineers
Carbine barrel – bores vary
.............................$49.95 MSR512
M98 MAUSER BOLTS
Complete bolt assembly with firing pin, extraction, bolts sleeve, etc. Standard length ’98 bolt, fits German 98K, Czech VZ24, Argentine ’09, etc. Gew
98 style bolts. Good, original condition...................... $79.95 ea. MSR123
GERMAN K98 STOCKS! JUST FOUND
A HANDFUL!
Original stocks in good condition (no junk)! Really hard
to find on the market now, and they normally command prices of $200-300
when you can find one.
MSR195 German stocks with cupped buttplates - with late style hole in the
cupped buttplate........................................................... $175.00
Get one while you can! They will not last long!
For Special Selection of what we have, add $10.00
MSR123 Bolt, complete straight handle ........$79.95
MSR126 Buttplate (flat)................................... $8.00
MSR127 Buttplate Screw................................. $1.25
CLN014 Cleaning Rod 12 1/2" M98/43
.......................................................$12.95
CLN025 Cleaning Rod 15" GEW 98...............$12.50
CLN018
Cleaning Rod 15" VZ24/G24(T)
.......................................................$13.50
CLN013 Cleaning Rod early 10"....................$12.00
CLN049 Cleaning Rod M93 17 1/4".................$10.00
CLN074 Cleaning Rod Stock Nut.................... $5.00
MSR135 Cocking Piece.................................... $7.00
MSR136 Ejector.............................................. $5.00
MSR138 Extractor.........................................$19.95
MSR516 Extractor new original.....................$26.50
MSR139 Extractor Collar................................. $8.00
TOOL041 Firing pin protrusion gage, 98 Mauser new
orig military – for 8mm & 7.62mm Mauser.
Also has a firing pin tip diameter gage
.......................................................$24.95
MSR141 Firing Pin Spring............................... $3.75
MSR514 Firing Pin Yugoslav ’98 Mauser........$30.00
MSR143 Floorplate (used)................................ $9.00
MSR142 Floorplate new orig, unnumbered....$19.95
MSR146 Follower (milled)................................ $8.00
MSR147 Follower (stamped, WWII)................$17.50
MSR148 Follower Spring................................. $4.00
MSR151 Front Sight........................................ $4.00
MSR153 Front Sight Hood, 98K....................... $6.50
MSR155 Front Sight Protector VZ24..............$10.00
MSR157 Guard Screw Bushing....................... $2.00
MSR158
Guard Screw Set (commercial) New
......................................................... $6.95
MSR158(A) Guard Screw Set (commercial) Used.. $5.00
MSR372
Guard Screw Set w/Lock Screws (military)
......................................................... $9.75
MSR159
Handguard, K98 (beechwood, used, orig)
.......................................................$15.00
MSR161 Handguard used walnut K98, orig..$18.95
HNGD34 Handguard 1908 Brazilian long rifle $19.95
MSR579 Israeli 1 leaf bolt stop spring.............. $9.95
MSR162 Low Scope Safety.............................$15.95
MSR129 Lower sling swivel, detachable, 98 WWI GEW
......................................................... $8.50
MSR193 Parade sling loop swivel, original 98 WWI
GEW................................................. $4.00
MSR595 Polish WZ29 ’98 Mauser Floorplate RARE
.......................................................$25.00
50 Hilton Street, Easton PA 18042
610.250.3960 Fax: 610.250.3961
www.e-sarcoinc.com
’98 MAUSER ENSEMBLE
WWII sling
2 ammo pouches
Cleaning rod
Late oil bottle
Front sight cover
Proper 8mm brush
$66.00 value – for only............... $44.50 MSR590
PROPER 8x57mm BORE BRUSHES
Bronze brush – 5 for...................... $6.95 CLN124
Stainless steel brush for cleaning those tough
military bores 5 for $8.95 CLN121
MAUSER STOCK MILITARY ISSUE
1.
2.
3.
4.
Israeli K98 handguard only
........................................ $19.95 MSR403
1908 Brazilian long rifle stock good cond.
........................................ $49.95 MSR366
A– Select (very few only) 1908 Brazilian
long rifle stock................ $85.00 MSR366A
1908 Brazilian long rifle stock with handguard, good cond.............. $65.00 MSR375
5. 1908 Brazilian long rifle stock with hanguard,
Select.............................. $100.00 MSR375A
6. Steyer M1912 stock w/buttplate & bayo lug
...............................................$39.95 MSR548
7. Steyer 1912 Rifle Stock, good
condition.................................$49.95 MSR549
Use above 1908 Mauser stocks to rework the 1908’s
with cracked stocks currently on the market.
’98 MAUSER MILLED MILITARY TRIGGER
GUARD ASSEMBLIES
Complete guard with catch floor plate, follower & spring
..................................................................$34.95 MSR208
Stripped trigger guard assy.........................$23.95 MSR206
(see this page for guard screw sets)
98 MAUSER 8x57MM STRIPPER CLIPS
Steel 5rd............................... $2.00 STC013
Original brass few only......... $3.00 STC028
’98 MAUSER FRONT SIGHT
COVERS
Back Again!
New condition $6.50,
3 for $17.95 MSR153
98 MAUSER GUARD SCREW SET
MSR372 – Military set w/lock screws used
...........................................$9.75
MSR373 – Military guard lock screw set new
...........................................$3.50
98 MAUSER COMMERCIAL
GUARD SCREW SETS
Commercial set, new...........$6.95 MSR158
NEW ’98 MAUSER
SPORTER BARRELS
We got a deal on a few 100 assorted caliber
Mauser barrels. 24" Standard taper sporter
barrels 5/8" at muzzle. Made by the renowned Citadel barrel producer.
Calibers available:
MSR351 .300 Win Mag................... $79.95
MSR611 7mm Rem mag................. $79.95
Note: These barrels were made special with
tight threads for accuracy. They screw on
fine with barrel installation equipment.
K98 MAUSER COMBO TOOL FOR
TAKING DOWN THE FLOORPLATE &
OILING AND CLEANING THE CHAMBER
These are original and in excellent condition. Hard to find!.............$9.95 MSR550
Check our website for a fabulous
assortment of ’98 Mauser trigger
guards over 35 variations – we had
a big sort!
MSR415 Combination of MSR129 & MSR193.. $9.95
MSR595 Rare WZ29 Polish 98 Mauser Floorplate
.......................................................$34.95
MSR175 Rear sight & handguard screw VZ24
......................................................... $4.00
MSR180 Rear Sight Sleeve ............................$15.00
MSR185 Safety................................................ $4.25
MSR150 Front Guard Screw (military)
......................................................... $4.00
MSR149 Screw, Front (commercial) New
.........................................................$3.50
MSR373 Screw, Guard Lock Set (military) New
.........................................................$3.50
SLNG010 Sling GEW 98 (WWI Style)
...................................................... $16.95
MSR193 Sling Loop for GEW Parade Sling position
.........................................................$4.00
MSR196 Stock Set German Wartime Laminated (used) w/
handguard, hardware, & cup buttplate....$N/A
STC013 Stripper Clips (8mm, 5 rd).................$1.45
MSR208 Trigger Guard Assy, milled military
...................................................... $34.95
MSR206 Trigger Guard Assy, stripped
...................................................... $23.95
O2
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
Here’s your chance to create
your own “Enemy AT The
Gates” sniper rifle with our
authentic type scope and
turret mount. See our website for a little background
on the Turret Mount
MORE MAUSER
PARTS
& ACCESSORIES
ORIGINAL WW2 GERMAN MILITARY REPLACEMENT GLASS LENS
43mm round lens for replacing broken lenses in
NEW!
ITEM
the the Neophan/ Auer, German mnfr. glasses
furnished to MG13/MG34/MG42 gunners during
the war. These glasses were a familiar sight from
the 1920s through the early 40s. Usually seen on
tortoise shell and wire frame Glasses, normally issued in a metal case. Original in excellent condition / Green color
....................................................................................... $14.95
SARCO HAS A NCIE ASSORTMENT OF GERMAN WWII SCOPES & ACCESSORIES
ZF39 SCOPE FOR GERMAN 98K WWII SNIPER RIFLE
closed ring low turret
MSR545
Here you have a faithful reproduction of the ZF39 Scope as used by German Snipers
during WWII. This scope has the proper finish, weight, size and steel tube diameter
(26.5mm) to install the low turret mount and short side rail mount that
Germany produced for their Sharp Shooters (Scharfschutzen). The power
scope has bullet drop compensator that runs from 100 to 1,000 meters, with
increment marks every 50 meters and a focus adjustment vane. The three-post
reticle and clarity is superb, both ends are just hand tight in order to remove and
install closed rings low turret mounts, if other mount is going to be used, just
tightened by hand all the way. Now you have the chance to get your Mauser 98K or
long rifle fitted with the optics and mounts that made the German Sniper System so
famous. Best of all is at a price you can afford !!!
MAUSER SCOPES & MOUNTS
MSR499 ZF39 Scope 4 power.......................... $299.00
MSR573 ZF39 scope 6 power.......................... $299.00
MSR401 Short side rail scope mount assembly.$199.00
MSR545 Low turret scope mount assembly with closed
rings................................................. $175.00
MSR544 Low turret scope mount assembly with split
rings................................................. $179.00
MSR500 Mauser swept back scope mount
......................................................... $149.95
MSR501 Mauser swept back mount with ZF4 scope
......................................................... $429.00
MSR554 ZF39 scope with closed ring low turret mount –
specify 4 or 6 power......................... $435.95
MSR555 ZF39 scope with split ring low turret mount
Specify 4 or 6 power scope................ $459.00
MSR571 ZF39 sniper scope with short side rail mount Specify 4 or 6 power.......................... $449.00
Please Note: Base screws are not included.
WWII GERMAN ZF39 SCOPE AND
MOUNT
Now set as a
package deal.
You canhave
a ZF39 K98
Mauser sniper scope with the side rail mount assembly
................................................................. $449.95,
3 for............................................ $1249.95 MSR571
GERMAN WW2 ZF39 SCOPE MOUNT
New and accurate manufactured Scope Mount as used
by the Wehrmacht & SS from
1941-1945. Improved last model
mount with the top lock screw,2
pins and extra long locking lever. Set up with 27mm rings. If
you need for a 1” scope, we can
include shims at no charge, but
you must ask! Perfect for creating a WWII German Sniper
Rifle..................................................... $199.00 MSR401
NEW!
ITEM
MAUSER K98
RIFLE BOOKLET
Reprint of original
WW2 German manual
Over 45 pages and a ‘pull out’ covering operation, parts, and target
engagement. This pocket manual
was issued to German soldiers
with the rifle. Size @6" x 4-3/8".
German language & illustrated
...............................$6.95 SB171
Nearly impossible to find, our ATIS wood sets
are original Italian factory production which
have been lost in the warehouse for years. Stock
comes with buttplate.
$125.00 STK384
ORIGINAL MILITARY ISSUE
RIFLE GRENADE LAUNCHERS
FOR MILITARY RIFLES
We have 5 types to choose from. All are in
like new to excellent condition and install
and dismount in seconds.
A. Mauser K98 Grenade Launcher,
Military production...$49.95 MSR489
B. Enfield #4, New GI..... $39.95 LE4056
C. Mauser K98 Israeli Grenade Launcher
................................$74.95 MSR575
D. FN49 Grenade Launcher with leather
case.........................$34.95 MISC048
E. FN49 Grenade Launcher with new
leather case, new condition
overall.................... $49.95 FN49074
Note: California law forbids sales to
residents of Ca.
D.
C.
B.
THE ZF41 MOUNT
Was made by Berlin-Lübecker
Maschinenfabrik, a German
WWII firearms manufacturer,
the company made all the ZF41 Marksman scope mounts
from 1941 till 1944.
Another added feature is that you
can install it yourself without the
need for drilling and tapping and
that was something the German Army had in mind, they could
send the mount and scope to the field and with a small punch
and a brass hammer, the scope was installed in minutes, thus
making a standard 98K into a Sniper System.
You will ask yourself, how come I did not buy it sooner?
ZF41 Scope..................................................... $289.00 MSR473
ZF41 Scope Mount.......................................... $189.00 MSR474
ZF41 Scope & Mount...................................... $469.00 MSR476
Exact repro of the original ZF41 Scope can cover with cleaning
bursh, sunshade retainer & canvas belt strap.$200.00 MSR475
Please Note: The closed rings are standard WWII issue but many folks want the open rings for
ease of installation and the open rings are acceptable in the national sniper scope matches.
Factoid: 74 years ago this month,
a Japanese submarine fired on
mainland USA, igniting fires at a
refinery near Santa Barbara, CA
Open ring low turret
MSR544
ATIS 12 GA. AUTO SHOTGUN STOCK SET
SUPER RARE SWEPT BACK MOUNT FOR
K98 MAUSER SNIPER RIFLE
Quality reproduction of this
incredibly rare sniper scope
mount. It takes the ZF-4 scope,
which we have available. Mount
is complete with the rings.
These mounts were made to
standardize the ZF-4 scope at
the very end of WWII. This is the
rarest of the rare. It comes complete
with the mounting base & rings &
screws for attachment to a standard
98K WWII Mauser. Developed by Sauer. $179.95
MSR500 Combo Special – Swept back mount with ZF4
scope $469.95 MSR501
SPECIAL OF THE MONTH
MSR500 - $149.95, MSR501 - $429.95
WW2 GERMAN M43 WOOL HAT
Excellent - new manufacture, earth brown colored M43 cap with two WW2 emblems. We like
this one best as the color of the cap goes well
with most clothing and it has a functional chin
and ear protection flap that is excellent protection for cold weather. Made with a medium
weight wool so it works in North American
climates throughout the year! Sizes 7-3/8",
7-1/2", 7-5/8"............................................................................................ $22.95 MISC345
K98 RIFLE STOCK DISC
Usually inserted in the right side of Mauser stocks in the 1930s and in Garrison rifles of the
Home Guard through the early war years. Would ID mfg., date, serial #
.................................................................................................................... $4.95 MSR596
PLEASE NOTE: Please, do not send us your original parts for comparison. We
are not responsible for lost, damaged, or misplaced parts in transit or upon
receipt. Please include only a picture and dimensions of parts needed for comparison. Thank you.
DISCLAIMER: Parts sold by Sarco should be installed only by a competent gunsmith. These products are sold as is and without a warranty. No liability is expressed or implied for damage or
injury which may result from the improper installation or use of these products.
REGARDING LOCAL, CITY & STATE REGULATIONS!
SARCO makes a large effort to keep abreast of state & local gun laws. With over 20,000 laws on the
books this is a Herculean and impossible job. Some of the products sold by SARCO could be restricted for
sale in your local area, while not restricted nationally. This could include, but not be limited to firearms,
ammo, parts, high cap mags, edged weapons, air guns, etc. You must determine your right to purchase,
own, use or resell specific products offered by SARCO in your jurisdiction. As local laws are constantly
changing, it your responsibility to determine if a product is prohibited before ordering from SARCO. You
warrant by ordering from SARCO that you are a legal adult without any legal restrictions from ordering
and are complying with all state, local, and federal laws. Please check your local laws before ordering.
LEGAL ADVICE????? PLEASE, DO NOT CALL SARCO for legal advice on guns. We are not a legal
firm and therefore are not able to give any advice. Any discussions had with any SARCO employee are
to be considered as guidance only. For questions on legal gun matters we suggest you call ATF. That’s
what we do.
A.
MILITARY MOSSBERG 42B STOCK
Original Mossberg Model 42 B wood stocks in
very good condition! We have the commercial
model stock, but these military stocks have
been elusive for some time! While they last.
.
...............................................$29.95 STK385
EGYPTIAN ‘RASHID’ RIFLE
MAGAZINE
Original in very good condition.
Rarely found nowadays! 7.62x39
caliber, 10 round $95.00 RM40
ATTENTION – EASTON SHOWROOM CUSTOMERS
Re: In Stock Inventory - We try and maintain stock of most items in our Easton, PA showroom,
however with the vast array of material we carry, this is not always possible. If you are planning
on visiting the showroom, please feel free to call ahead to make sure that we stock the item(s) that
you need. If these parts are not at the showroom, we will arrange to have them brought in from our
warehouse for you to purchase or look at. Please give us a least a few days’ notice before your visit
so we have time to bring the goods in. Please note that the prices in Shotgun News are dealer prices
and may not be the same prices as in our showroom. We are striving to make your shopping experience with us a pleasant and hassle free as possible.
ORDERING INSTRUCTIONS
~ There are different procedures for
Ordering PARTS vs Ordering FIREARMS ~
PHONE ORDER – Call (610) 250-3960
ONLINE ORDER – Go to www.sarcoinc.com
FAX ORDER – (610) 250-3961
MAIL ORDER – Sarco Inc, 50 Hilton St, Easton
PA 18042
SHOWROOM VISIT – Mon-Sat 10am-5pm /
Friday Opened til 8pm
For directions to the showroom, see website.
CUSTOMER SERVICE – [email protected]
PARTS QUESTIONS: [email protected],
MACHINE GUN QUESTIONS: [email protected]
ABOUT HIGH CAPACITY MAGAZINES:
Although we try to stay abreast of current
State gun laws, it is a herculean task
with over 20,000 laws on the books. By
ordering, you are stating that you are
complying with your Local & State laws.
Most States allow large capacity magazines. Some do not. If you are unsure on
this issue, contact your Local or State law
enforcement to confirm what is allowed.
This is a partial list of States with some
hi-capacity restrictions: NJ, NY, MA, MD,
HI, KS, CO, CT, IL and various county
laws therein including Chicago, D.C.
Prices are subject to change without notice. We are not responsible for
typographical errors or misprints
MAGAZINE SALES IN CONNECTICUT
Until we get further clarification we can ship
NO cartridge magazines, feeding devices, or
drums to Connecticut. We are able to send 10
round or under magazines to holders of FFL.
OUR INVENTORY
· We try to ship the best condition parts at the
time of your order. Some are new and some
are used, many hard to get.
· Prices are subject to change without notice.
Our ads in the Shotgun News are catalogue
prices and may not reflect any sales or higher
pricing found on our website.
· All sales subject to availability. Acceptance
or receipt of order does not constitute confirmation of order. Employees are not authorized
to modify prices or conditions stated in ads.
· All NFA rules apply.
Sarco only sells products to persons 18
years or older
Please note: Sarco’s responsibility for goods
shipped ends when it leaves our door. Lost or
damaged claims are the responsibility of the claims
carrier. We will assist in every way for you on
claims to carriers.
RETURNS
We offer a 5-day inspection period on all of
our merchandise, except for special order
items which are not refundable. Items that
state they are sold “as-is” are not returnable. Tools and marketing devices are not
returnable.
· PHONE ORDERS, EMAILED, FAXED OR MAILED-IN
ORDERS: You will need a Return Authorization Number to return something. Please
email [email protected] or call (610)
250-3960 ext.114
for a RT #. Feel free to check on the status of
your return, credit or refund.
· ONLINE ORDERS: Please visit our website
www.e-sarcoinc.com and click the Return
Policy link. Fill out the printable form and
mail it back with your package. Feel free to
email our e-Comm department at ecomm@
sarcoinc.com to check on the status of your
return or call (610) 250-3960 and ask to be
transferred to the e-Commerce Department.
We do not refund any shipping cost unless
the error/problem causing the return is our
fault.
Returns may be subject to a 10% restocking
charge.
ORIGINAL K98
MAUSER AMMO
POUCHES
German WW2 triple
ammunition pouches
used by all riflemen.
Black leather in good
shape. Getting more and more difficult to
find originals! Markings are mixed...Pair
for................................. $60.00 MSR623
GERMAN 98K WWII STYLE
MAUSER AMMO POUCH
Pebble grain…
$9.95 ea,
$18.95 per
pair, $34.95
for 2 pairs MSR483
MISC. 98 MAUSER ITEMS
1. Rare brass Turkish Mauser cleaning
funnel – locks on to muzzle. To pour
solvent down the bore – for Turk M1890
& M1893 ................................. $14.95 MSR300
2. Original Argentine SOM sniper scope w/base &
leather case..................................... $3495.00
3. Rare M98/43 La Coruna Spanish
muzzle cover................................$9.95 MSR217
4. M98/43 Handguards, replace your
cracked one.............................. $16.50 MSR216
5. VZ24 Mauser new original stock disc....... $4.95
3 for.........................................$12.50 MSR523
6. Original Israeli K98 grenade launcher, like new
.............................................. $49.95 MSR575
7. Orig Yugoslav, 98 & M48 etc Mauser oiler
................................................ $4.95 MSR576
8. Rare original 1904 Portuguese Verguiero front
sight cover, new........................ $9.95 MSR591
FOUND SOME WHATCHAJIGAMAROOS IN
THE WAREHOUSE!
These bolts are straight out of
the FN Belgian factory years
ago. This is a complete back
end – threaded for sleeve on
the inside. For a K98, here are a couple ideas:
1. Use this rear with the front of a normal bolt
to build a long or short Mauser action of your
dreams.
2. Use the bolt handle to weld a true FN pattern
original low scope bolt for your sporter project.
3. Use for that pet project you created when you
woke up with a startle at 3am
$4.95, 3 for $11.95 MSR615
Note – We have two or three thousands of these
if your brainstorm is marketable. Talk to Dave
or Cholly.
SHIPPING
ALL ORDERS WILL BE RECEIVED,
PROCESSED AND SHIPPED OUT OF OUR
PENNSYLVANIA LOCATION.
MINIMUM SHIPPING AND HANDLING
CHARGES START AT: $9.50
Rifle Stocks and Barrels…. $12.50
Call for larger items on prepaid orders
* NJ residents please add 7% sales tax. Not
all items available to NJ residents.
* PA residence please add 6% sales tax
All orders to Alaska and Hawaii shipped
via US Mail, unless customer specifically
requests Blue or Red Label UPS (not available
for online orders). Employees not authorized
to modify prices or conditions stated in this
advertisement.
OUR GUARANTEE
Our guarantee is simple and easy to understand. If you are not satisfied with any
item received from us you have 5 days to
return it for a replacement or a refund of
the advertised price. All returns must be
accompanied by a letter WITH YOUR INVOICE NUMBER and explanation of the
problem. All returns must be in the same
condition as you received them-any alterations or work will void the guarantee.
Special order items not returnable. We
can not accept returns on TOOLS unless
the tool is defective. We do not refund any
shipping costs unless the error/problem
causing the return is our fault. Returns
may be subject to 10% restocking charge.
Send all shipments pre-paid. CODs will
be refused. Any items returned due to
customer’s error are subject to a 10%
restocking charge. ($2.00 minimum). As
we do not install the parts we sell, we
cannot guarantee they will function when
installed by others. For proper function
and safety, many gun parts should be
installed by a competent gunsmith - see
our disclaimer:
X2
Phones Open: Mon Fri, 8:30am – 5:00pm
Showroom Open:
Monday - Saturday,
10:00am – 5:00pm,
Friday til 8:00pm
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
BERETTA 92 15 rd.
MAGAZINE (Italian Mnfr.)
New mnfr. Italian made
Beretta 92 magazine
in 9mm. Just in!
$29.95 RPM311
Khaki canvas suspender unit works well with
U.S., Israeli, Canadian, etc. pistol and cartridge belts that have grommet eyelets. These
are used in excellent condition and originally
made for combat duty in the Sinai Desert,
and they are found throughout Africa with combat units. The straps are
adjustable and a favorite feature of these is that they allow you to attach
a pack behind the nape of the neck, or attach field gear with hooks /
grommet holes............................................................. $17.95 MISC465
RUSSIAN PPSH-41 SMG (non-firing)
NEW!
ITEM
‘DESERT EAGLE’ NON FIRING
DISPLAY PISTOL
NEW
ITEM
!
Venerable pistol well known for knocking out
hardened personnel targets, body armor,and lightly
armored vehicles. Also well known for it’s ‘online’
presence in ‘Call of Duty 4’! The full size metal replica
has an action that cocks and trigger pulls with a
click , and the magazine can be ejected $105. 00 REP27
ALLIED & AXIS DISPLAY GUNS (NON-FIRING)
Sarco presents an increasing new line of finely made metal and wood replica firearms, noted for their
historical significance in the battle for and against, the rise of fascism and geo political domination in the
World Wars of the last century. These display guns are full size and the best quality on the market. Many
of them come with markings and or accessories not available from the competition. These are perfect for
presentation, static display, reenacting, or for outfitting that military vehicle in the garage!
While most Americans can own non-firing display guns, some States and municipalities have enacted
regulations inhibiting ownership. It is important that you check your State’s gun laws to see if you reside
in one of these areas. We cannot ship our display guns out of the country. Below is a partial list of States
where there are laws concerning ownership of display guns. Remember, by ordering from Sarco, Inc.,
you are confirming to us that you are complying with your State regulations on this issue. CA, CT, KS,
MA, MN, WI *All non-firing display guns come with an orange plug inserted in the muzzle – required by
Commerce law.
Outstanding new arrival of a non-firing, all metal
replica of the venerable Sten Gun used since WWII.
Stock is removable, bolt can be charged, and magazine is removable. We have two
versions in stock:
A. STEN MK2 WITH SLING & MAGAZINE
...........................................$145.00 REP22
B. STEN MK2 WITH SLING, ..... MAGAZINE AND
COMMANDO PISTOL GRIP FOR
CONVERTING THE GUN INTO A PARA
TROOP VERSION.................$159.95 REP23
A.
B.
U.S. M1 CARBINE (NON-FIRING)
Very realistic looking with some
functioning parts. This version is
the standard WW2 model w/o bayonet lug
$218.95 REP07
STOCKS AND FORENDS ... SARCO’s GOT A
BOATLOAD OF WOODEN STOCKS & FORENDS
Super Commercial Stock Deal.... all brand
new original stocks and forends!
Seriously,
a great deal
on wood for
firearms under the mfg
names such
WOW! THIS IS
as Mossberg,
75% OFF!
Marlin, H&R,
Savage, Ithaca, S&W, and Winchester. 15 different stock and forends at
a fraction of the cost and with no duplicates. Total Value $587.00, but
Sarco’s Special Price is all 15 pcs. for $150.00 or buy 2 LOTS for $265.00!
This is the best deal we have offered in a long time. I would have bought
it myself 30 years ago when we were building our commercial gun parts
business. This is a great opportunity for Gun Show sale items and if you
sell 3 of the 15 items, you’re out of it! ONE LOT of stocks & forends
........................................... $150.00, TWO LOTS for $265.00 STK363
!
CRIMSON TRACE LASER GRIPS
SALE
Best low profile laser device for pistols on
the market! We’ve got a great deal on brand
new Para branded, Model LG404 Crimson
Trace Laser Grips for use with the following
pistols: PARA Compact and single stack
COLT Officer’s & Defender
KIMBER Compact,Ultra Carry & Ultra Elite
SPRINGFIELD ARMORY Compact & Ultra
Compact
WILSON COMBAT …. And other auto pistols with grip
screws measuring 2-11/16" apart.
Grips come with batteries, internal grip dust shims,
Allen wrenches for laser alignment, laser label &
swabs. Simple to install and use. Most importantly, it provides an
upgrade to your pistol that does not change the gun’s sleek appearance or handling characteristics. On/Off switch on bottom left grip
and activation button set on the grip where the middle finger rests.
Color-Black. Limited supply in stock and priced to move
$249.95 GRP206 $175.00 PRICE BUSTER!!!
NEW!
ITEM
P38 HARDSHELL HOLSTER W/ WW2
WEHRMACHT BELT
Black leather P38 pistol
holster with rugged
black 2 inch wide standard WW2 Army belt with embossed
NEW!
steel buckle. @49" long with inside
ITEM
reducing length strap. WW2 markings.
New........................................$37.95 HOL134
U.S. THOMPSON
1928 SMG
W/20 RD. MAG. (NON-FIRING)
Some functional parts, includes sling and 20 rd. stick
magazine....................................................$242.95 REP13
U.S. 12 GA SHOTGUN
POUCH
Fits on
your
belt.
$12.95 MISC303
M1 GARAND RIFLE (NON-FIRING)
The wood on this rifle is better looking
than most govt. wood stocks. Wellmade w/some functioning parts…$235.00 REP08
GERMAN WW2 MP44 ASSAULT RIFLE
U.S. M1A1 PARATROOP CARBINE
(NON-FIRING)
Very accurate folding stock version of the
Paratroop M1A1 carbine. Some functional
parts and magazine. $220.95 REP11
GERMAN P38 PISTOL (NON-FIRING)
Issued to Wehrmacht troops in 1940, this pistol became the regular
sidearm of 3rd Reich Officers & some NCOs. Cheaper to produce than the
Luger, it was light and effective. Even a half pound lighter than the Model
1911 and with an 8 rd. magazine. Our authentic looking non firing display
gun looks and feels like the real thing. Slide can be cocked, hammer pulled and
trigger squeezed with a distinctive click. A classic display piece in metal with black plastic
grips like the original. We have two offers: 1. P38 non firing pistol......$72.95 REP05
2. P38 pistol with our WW2 dated hard shell holster..........................$87.95 REP15
(3 VARIETIES)
Beautifully made, full
size replicas in metal
with knurled wood grips.
Very realistic looking. We
offer a couple with and
without holsters:
1. Standard luger w/
4" barrel
$112.95 REP06
Standard luger w/ WWI canvas holster
............................................... $122.95
2. Naval Luger w/ 5" barrel.......... $112.95
Naval Luger w/ WWI canvas holster
............................................... $122.95
3. Artillery luger w/ 8" barrel....... $124.95
REP14
REP09
REP18
REP10
non firing replica with functioning cocking mechanism,
trigger activation and magazine locking action. Used by
the German SS troops on the Eastern front as well as by
occupied territory police under the SS and Romanian troops. Considered as an improvement over the
MP40, but because of lawsuits by Erma over design infringements, the Haenel company had to cease
production................................................................................................................ $161.00 REP28
GERMAN MP-40 SMG
(non-firing)
Famous full size display gun with operating bolt, recoil assembly,
folding stock, mag catch and trigger. Saw combat throughout
Europe, Africa, and even Vietnam! Bound to spark interest and
conversations from all who see it. Realistic metal and plastic
construction and it comes with steel magazine and leather sling.....$210.00 REP02
THOMPSON 1928 DISPLAY GUN (non-firing)
Wood and metal replica of the
venerable submachine gun that
made history with gangsters of the 20s, and
our troops and allies in WW2. Well made and
has a cocking mechanism that moves back and
forth and trigger that allows the bolt forward.
Magazine catch also works. Comes with steel 50rd. display
drum. A real crowd pleaser and guaranteed to start conversations!
........................................................................................................$249.95 REP01
DISPLAY PISTOLS (NON-FIRING)
Full sized metal reproduction with diamond knurled wood grips.
Sold with lanyard. Model 1911 Pistol w/lanyard…
1. Model 1911 Pistol w/lanyard ............................. $135.95 REP12
2. Model 1911 Pistol Pistol/lanyard & Hip Holster
........................................................................... $147.95 REP16
Another of
our well-made
metal replicas
of the stalwart
sidearm of the
Wehrmacht, 007,
and many other
good guys and
arch villains! Full
size metal replica
with moving slide and hammer/trigger
click..................................$84.95 REP21
GERMAN MAUSER C96 PISTOL
NEW!
ITEM
GERMAN MP41 DISPLAY SUB
MACHINE GUN Full size wood & metal
U.S. MODEL 1911
GERMAN LUGER PISTOLS
PPK PISTOL (NON - FIRING )
(NON-FIRING) Full size, solidly built with some functioning parts.
Comes with magazine. Feels and looks like the real thing!
$240.00 REP03
NOTE ON NON-FIRING DISPLAY GUNS
STEN MK-2 SMG DISPLAY GUN
NEW!
ITEM
I.D.F. KHAKI ‘H’ HARNESS
Truly one of the world’s first class sub machine guns of WW2 & beyond. Over 5 million
produced and many of them came face to face with U.S. servicemen in Korea and Vietnam.
Spewing a voracious 900+ rds. a minute with 7.62x25 Tokarev ammo, this gun demanded
respect, especially when the Soviets outfitted entire Companies of their infantry with this
SMG against German troops in WW2 and the Chinese against U.N. troops in Korea.
This glorious full size, non-firing display gun in wood and metal with removable 71rd.
drum, has an action that
allows you to cock the
bolt and pull the trigger.
We also offer an Original Ppsh41 sling and
Drum Pouch with this package ,as long as
supplies last. ( colors of pouch &
sling may vary ).
PPSH41 W/ POUCH &
SLING... $199.95 REP29
Heavy cotton gun bag very similar to the British
rifle bag, but slightly shorter and in a mustard
color. About 41" long. Large Rhodesian Selous
Scout emblem stenciled on one side. These gun bags will hold some rifles, but were primarily used to hold Greener and Belgian Browning Shotguns in barracks, watchtowers,
Eland Armored Cars etc..................................................................... $15.95 MISC394
NEW!
ITEM
JUST GOT ANOTHER SHIPMENT OF PICKLEHAUBES
Finely crafted of heavy leather with solid brass trim, cockades, spike assembly and detailed eagle emblem. These are
M1895 Prussian German Fusilier Regiment Helmets - Nicely
done. All the metal is a beautiful brass. An extremely accurate & detailed recreation and fit for use or display and
will be the topic of conversations in your collection or “man
cave”. German spiked helmet. These helmets were used up
to the end of WWI. Beautiful huge brass Prussian spread
eagle on the front. Last shipment we sold out for $99.95.
SARCO struck a tremendous deal to bring you this helmet
at 1/10th the price of an original..............$59.95 HLM015
RHODESIAN SELOUS SCOUT RIFLE/
SHOTGUN CASE
Full size
non firing
display
gun manufactured
in metal
with wood
grips. This
replica
is very well made and features a cocking
mechanism that moves and trigger that
clicks when cocked. Also comes with a
lanyard. A terrific example of the Mauser
pistol that served throughout the world in
military circles including limited numbers
used by U.S. officers in the Philippines
......................................... $89.95 REP24
ISRAELI SNIPER AMMO POUCH
Khaki canvas pouch used by
Snipers for holding 8 rds. of
.308 Match ammo which can
be pulled out in an instant Pouch
Only.
like a machine gun belt.
Has U.S. belt hooks too!
First time available
NEW!
$25.00 MISC349
ITEM
GERMAN WW2 SPLINTER
CAMO HELMET COVER
NEW!
Perfect compliment to our M35
helmet or WW2
German Paratrooper
helmet. Cover is made
with herringbone
twill, and has 6
loops on outside for
attachment branches
or grass. Fits medium & large helmet
shells. With German
markings.$18.95
MISC393
ITEM

Similar documents

May be the COOLEST new military product of 2016!

May be the COOLEST new military product of 2016! AR020 AR15/M16 Front Sight Detent............. $2.00 AR021 AR15/M16 Front Sight Detent Spring.. $1.00 AR024 AR15/M16 Front Swivel Pin................. $1.00 AR023 AR15/M16 Front Swivel Rivet......

More information

SARCO, INC.

SARCO, INC. SARCO’S M-1 CARBINE STOCK CONVERSION FOR THE RUGER® 10/22® Ruger® 10/22® rifles are a great platform for making all sorts of custom hunting, target, and military configuration rifles. We like it ju...

More information

(C) RIFLE PARTS SET

(C) RIFLE PARTS SET caliber selections. In some cases, these barrels just need to be polished and crowned on the muzzle end. A few will need other finishing touches. Compare at $99.00. See notes below: 1. .17 calibe...

More information