Product Catalogue Version-2.cdr
Transcription
Product Catalogue Version-2.cdr
World Class Quality Products Proudly Made in Zambia Product Catalogue Underground uPVC Drainage Systems 1-2 Soil and Vent uPVC Drainage Systems 3-4 uPVC Systems Expansion/Relief Valve Pressure Control Valve 5-6 Rain Water Systems 7 PPR Hot & Cold Water Plumbing System PPR Pipes and Fittings 9-15 Water Tanks 16 SAV50 SE404 SW49 UBR42 UYAR42 UTHS420 Lamasat 110 Twin Wall Pipe Compression Fittings UBR41 UYAR41 Lamasat H.D.P.E Pipe www.lamasat.co.zm WebZ Designs - www.websitezambia.net Underground uPVC Drainage Systems Socket Double 110mm : Ue401 Socket Single Socket Double Solvent Weld Bend Long Radius ¼ (90°) 110mm : UES400 *110mm : UB42L 110mm : UE400 160mm : UE600 Bend Plain 1/8 (45°) Ribbed Sewer Pipes (Plain & Socketed) Bend Plain ¼ (90°) Ribbed Bend Plain ¼ (90°) Ribbed Access NO LONGER RIBBED 110mm : UBR41 110mm PLAIN 6m Ul420 50mm PLAIN 6m ULE420 40mm PLAIN 6m UZN420 NO LONGER RIBBED 110mm : UBR42 110mm : UBR45 Junction Plain (45°) Junction Access Left (45°) 110mm : UY41 110mm : UY42 Lamasat International is Zambia’s leading manufacturers and suppliers of Plastic Pipe reticulation systems, meeting the needs of the plumbing, civil, agricultural,industrial and petrochemical industries, primarily in Zambia, but also supplying into Central Southern Africa, 1 For our full product range, visit our website: www.lamasat.co.zm Underground uPVC Drainage Systems Gulley Header and Grate Round Grate Round only Rodding Eye 45° Gulley ‘P’ Trap 190 x 110 mm : UGA40 190mm : UGG40 110mm : UAP43 110mm : UGB40 Stopend Plain Male Stopend Plain Female 110mm : UAP40 110mm : UAP41 Stopend Access Junction Reducing Plain (45°) 110mm : UAP42 160 x 110 x 160mm : Uy64 Junction Access Right 45° 110mm : UYA41 Lamasat, Waste and Vent System is a uPVC solution, being white in colour and offers corrosion resistance and excellent flow rates. The system is tough and offers resistance to impact. As a result, site breakages and other failures are minimal. The system is UV stabilised to prevent weathering and oxidation in Zambia’s harsh climate. Completed installations are neat in appearance and will provide many years of service free use under normal operating conditions. 2 For our full product range, visit our website: www.lamasat.co.zm Soil and Vent uPVC Drainage Systems Bend Plain (90°) 110mm : SB 40 Socket Kimberly 110mm : SE 402 Bend Access Heel (90°) 110mm : SB 41 Socket Single Socket Double 110mm : SE 400 110mm : SES400 Bend Access Heel (135°) Junction Single Access Heel (90°) Bend Plain (135°) 110mm : SB 49 110mm : SY 42 110mm : SB 48 Junction Single Plain 90° Vent Bend Access Heel (90°) Junction Single Plain (45°) Junction Single Access Heel (45°) 110mm : SY 41 RUBBER RING SEAL 110mm : SB 400 110mm : SY 49 110mm : SY 400 3 For our full product range, visit our website: www.lamasat.co.zm Soil and Vent uPVC Drainage Systems Bent Panner Collar Plain 90° Bent Panner Collar Access Heel (90°) ST 44 ST 41 Pan Collar Straight Rubber Socketed SG 46 Pan Collar Straight Rubber Solvent Weld SG 40 Eccentric Reducer Stopend Plain Stopend Access Pan Collar Offset 110 x 50mm : SE 404 110mm : SE 403 110mm : SEA402 SG 45 More from Lamasat.... 4 For our full product range, visit our website: www.lamasat.co.zm uPVC Waste Systems Pipe 40mm Plain Pipe 50mm Plain Socket Solvent Socket Reducer 6m : 40mm WPE213 6m : 50mm WPE313 40mm : WS 4 50mm : WS 5 50 x 40mm : WR 5 Bent Access Heel 90° Bent Plain 135° Bent Access Heel 135° 40mm WBE41 50mm WBE51 40mm WBE42 50mm WBE52 40mm WB 43 50mm WBE53 Junction Plain (87.5°) Junction Access Heel (87.5°) Junction Plain (135°) Junction Access Heel (135°) 40mm : WTE40 50mm : WTE50 40mm : WTE41 50mm : WTE51 40mm : WT 42 50mm : WTE52 40mm : WT 43 50mm : WTE53 Adaptor Male 40mm Adaptor Female 40mm Adaptor Male 50mm Adaptor Female 50mm 1¼ BSP : WMO4 1½ BSP : WM 4 1¼ BSP : WMO4 1½ BSP : WM 4 1¼ BSP : WMO51 1½ BSP : WMO5 2” BSP : WM 5 1¼ BSP : WFO51 1½ BSP : WFO5 2” BSP : WF 5 Bent Plain (90°) 40mm WBE40 50mm WBE50 5 For our full product range, visit our website: www.lamasat.co.zm uPVC Waste Systems Strap On Boss Air Vent Cowl 50mm : WAB5 50mm : WV 52 2-Way Vent Valve 50mm PVC Holderbat/ Ratchet SAV 50 40mm : WHB4 50mm : WHB5 Alluminium Holderbat *40mm : WHA4 50mm : WHA5 6 For our full product range, visit our website: www.lamasat.co.zm One Way Vent Valve WAV 50 Pipe Holderbat 40mm : WH 4 50mm : WH 5 Rain Water System ® Lamasat 1. Gutter DGH510 (3m) : 515 (4,5M) : 520 (6M) 2. Internal Gutter Angle 90° DA 503 3. External Gutter Angle 90° DA 504 4. Union Clip DU 50 5. Fascia DK 501 6. Outlet DO 503 7. Down Pipe Bend 90° DNB 30 8. Swanneck Ends (Pair) DNE 300 9. Pipe (Plain) DPHP 310 10. Pipe (Socketed) DHP 310 11. Pipe Clip DC 302 12. Shoe DS 30 13. Top Rafter Bracket DTA 5 14. Stopend DE 501 15. Loose Pipe Socket DPS 300 SOLVENT WELD Ks20 - 500ml / Ks2 - 100ml 1. Gutter 2. Gutter Angle 3. Bracket 4. Gutter Outlet 5. Stopend 6. Square Downpipe Bend-Shoe 7. Square Downpipe Clip 8. Downpipe 3Metre 9. Downpipe Socket 10. Union Clip SGH510 (3M) : 515(4,5m) : 520(6m) SA 504 SK 501 SO 503 SE 501 SNE 300 SC 302 SPH310 SPS 300 SU 50 SU 50 SOLVENT WELD KS 20 - 500ml / KS 6 - 250ml / KS 2 - 100ml 7 For our full product range, visit our website: www.lamasat.co.zm POLYPROPYLENE RANDOM (PPR) PIPES & FITTINGS PLUMBING SYSTEM FOR HOT or COLD WATER 20mm | 25mm | 32mm | 40mm | 50mm | 63mm www.lamasat.co.zm 8 For our full product range, visit our website: www.lamasat.co.zm PPR Installation Demo INSTALLATION RECOMMENDATIONS Handling the Lamasat installation system does basically not differ the installation scheme for metallic pipes. Fitting and features customary in the trade as well as insulating materials in accordance with the heating installation prescription may be applied in the traditional manner. Planning and execution of drinking water systems are carried out in conformity with DIN 1988 Technical Regulations on drinking water Systems. Use on mixed systems, e.g. during repair work is problem free. The exceedingly small number of tool required, simplifies the processing of the entire system. Owing to the extensive fitting program, appropriate molded parts required for each mode of installation e.g. wall installation are available. Coupling with existing plastherm systems to frequent use can easily be carried out using welding saddles. Installations elements subject to frequent use can easily be pre-assembled (welded) in the workshop. TO MAKE SURE THAT OUR INSTALLATIONS ARE INSTALLED PROFESSIONALLY, THE FOLLOWING RECOMMENDATIONS MUST BE OBSERVED. Avoid bubbles inside the piping Mount piping upwards towards the tapping point Install aerators and ventilation device at the upper end of the ascending part of the line evacuation at lower end. Separate cut-offs should be mounted for ascending phases, apartment piping, pressure rinsers, hot water boilers and garden piping. For condensation reasons, the hotter water piping should be mounted above the colder water piping. Pipe fittings should always be fixed with inserts to avoid sound transmission Contacts with wall structures ought to be avoided for passages through walls and ceilings to eliminate sound transmissions. Pipe elongation should be taken into account. Welding at outdoor temperatures below 000C is possible only under specific conditions. 9 For our full product range, visit our website: www.lamasat.co.zm PPR Fittings PIPE (10 AUTU) CROSS TEE Various Sizes Available Various Sizes Available ADAPTOR UNION P-BRASS REDUCER (FEMALE THREADED) Various Sizes Available Various Sizes Available ELBOW 45º (FEMALE THREADED) Various Sizes Available Various Sizes Available ADAPTOR 10 For our full product range, visit our website: www.lamasat.co.zm PPR Fittings SOCKET EQUAL END CAP Various Sizes Available Various Sizes Available ELBOW 90º ADAPTOR UNION P-BRASS Various Sizes Available Various Sizes Available (MALE THREADED) ADAPTOR TEE 90º (MALE THREADED) Various Sizes Available Various Sizes Available 11 For our full product range, visit our website: www.lamasat.co.zm PPR Fittings HEXAGONAL ADAPTOR FEMALE THREADED BATTERY CONNECTION (FEMALE THREADED) Various Sizes Available Various Sizes Available ELBOW 90º VALVE CHROME PLATED (FEMALE THREADED) Various Sizes Available Various Sizes Available TEE 90º CROSSOVER PIPES (FEMALE THREADED) Various Sizes Available Various Sizes Available 12 For our full product range, visit our website: www.lamasat.co.zm PPR Fittings HEXAGONAL ADAPTOR BRACKET (MALE THREADED) Various Sizes Available Various Sizes Available ELBOW 90º VALVE (MALE THREADED) Various Sizes Available Various Sizes Available TEE 90º (MALE THREADED) BALL COCK Various Sizes Available Various Sizes Available 13 For our full product range, visit our website: www.lamasat.co.zm PPR Tool Kit WELDING SET WELDING MACHINE WELDING CUTTER WELDING SOCKETS SIMPLE STRONG AFFORDABLE 14 For our full product range, visit our website: www.lamasat.co.zm POLYPROPYLENE RANDOM (PPR) PIPE & FITTINGS PLUMBING SYSTEM PPR PLUMBING SOLUTIONS is considered the best carrier of portable water, using the revolutionary raw material specified FOOD GRADE, which is strongly believed to be as replacement to conventional GI pipes which are prone to rust, leakage and scalping. Lamasat is present on the market of plastic piping systems since 2003. Our new PPR products range cover (polypropylene) PPR system of pressure and/or hot water (heating) distribution. Presently PP-R pipes & fittings are the most reliable in plumbing and water supply plants, due to their chemicals features and fusion welding, which ensures the plumbing to have a perfect seal tight system. Approved by the World Health Organisation, Eco-Friendly, Quality, Temperature Resistance Quality etc, puts PP-R pipes & fittings as the best selection. In addition, PP-R fittings have become very popular these days because of the low cost, good durability and easy installation. Pipe and Fitting Networks for: · · · · · · · Cold & Hot installation, i.e. in Residences, complexes, Apartments, Office, hospitals, hotels, Schools etc. Industrial, i.e. transportation of corrosive fluids (Like acids) and Liquid foods etc. Agriculture and Horticulture. Compressed air plants. Swimming Pools. Rain water harvesting and utilization systems. The Salient features: · · · · · · · · · · · · · Extremely long life, 50 yrs, service life Leak proof & Frost proof Non-delayed & non-deforming Temperature resistance (800c) Heat preservation and energy saving No calcification Unique and un-rivaled jointing technique with lifetime security Low lying time & cost Convenient & reliable installation Good chemical resistance No reaction with salts & acids Taste & odor – neutral Eco-friendly 15 For our full product range, visit our website: www.lamasat.co.zm PLASTIC WATER TANKS Lamasat Plastic Water Tanks are durable strong and resistance to light degradation. Ranging from 200 Litres to 12, 000 Litres. All our tanks are 7-years guaranteed and come in the colours of black & Green. 16 For our full product range, visit our website: www.lamasat.co.zm LAMASAT PLUMBING SYSTEM Rainwater Systems | Above & Below Ground Drainage Systems & Components | Waste Traps Indoor Hot & Cold Water Plumbing System Lamasat International Ltd Plot No. 397/0/1 Chipwenupwenu Road (Off Kafue Road) Makeni, Lusaka, Zambia Telephone: Fax: Web: Email: +260-211-273142/5 +260-211-273141 www.lamasat.co.zm [email protected] WebZ Designs - www.websitezambia.net
Similar documents
PVC Pressure Manual - Lamasat International Limited
Lamasat International was registered in 2002 as a manufacturing company of pipes and polypropylene bags. Since then the company has grown with investments to date of over US$ 60 million with a dive...
More information