Siemens SpeedStream 4100 Ethernet ADSL Modem

Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
Before You Start
These instructions assume a NIC (Network Interface Card) Ethernet Adapter is
already installed on the workstation to be used to access the Internet via DSL.
Please refer to your equipment vendor on how to properly install and configure
the NIC.
What comes out of the box
The CPE (Customer Premise Equipment) box delivered to you will contain the
following:
·
·
·
·
·
·
·
·
A quick start guide containing a self installation CD
The SpeedStream 4100 modem
The Power Supply/Adapter
The Ethernet cable (Yellow)
The Data cable (Gray)
One line splitter
Three line filters
One wall mount DSL filter
If additional filters are necessary, they can be purchased from any local
electronic supplies store.
CPE Configuration and User Registration Process
These instruction will take you through the inside wiring setup, the CPE
configuration, and the User registration process. You should have already
received an email with your User Name and Password. If you didn’t, or if you
misplaced it, call your support center at 1-866-920-5228, option 1 for assistance.
1. Place the CD in the drive
2. The setup program should start automatically. If it doesn’t, click on “Start”,
then “Run” and type in x:\Installs\setup.exe (where x is the drive letter of
you CD-Rom drive)
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
3. Welcome Screen
4. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
5. Software License Agreement
6. Read the Software License Agreement and click on “I Accept”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
7. Subscription Information
8. AT&T emailed the Username and Password to you separately. If you
misplaced the information, please call your support center at
1-866-920-5228, option 1 for assistance. Make sure you have your order
number, telephone number where the DSL is being installed, or the tracking
number for this order to be properly identified
9. Once you have this information, click on “Yes”
10.
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
Login Screen
11. Type the Username and Password in the appropriate field
12. Click on “Next”
13.
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
Filters Installations
14. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
15. There are two types of filters in the box:
16. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
17. Locate the phone jack where you wand to install DSL
18. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
19. Plugging the filter into the jack
20. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
Plug any devices listed below into the side of the filter labeled as “Phone”
21. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
22. Connecting the data cable
23. Click on “Next”
24.
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
Installing filters on all other phones in the home
25. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
26. Installing filters on all other phone devices in the home
27. Click on “Next”
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
28. Connecting the DSL Modem
29. Click on “Next”
A. To Bridge the Modem:
1. Access the PPP location screen by accessing the GUI.
• Click the Advanced Button
• Select the PPP Location button
2. Select one of the following options.
• PPPoE is on the Modem
• PPP is on the computer
• Bridged Mode (PPPoE is not used).
NOTE: When the PPPoE on the modem or Bridge mode is
selected a warning screen displays.
Business IP DSL Self Installation Instructions for
the Siemens SpeedStream 4100 Ethernet ADSL
Modem
3. Select the option based on the following information:
• Bridged Mode
• PPPoE on the Modem
4. Modem restarts to save the settings.
5. Check if you can connect and browse.
6. If you are unable connect, refer to Siemens S100/4100 HSI Modem
– Cannot Access the GUI.
B. To Reset the Modem (to be executed as a last resort):
1. Press the Reset button on the bottom of the 5100B and on the
back of the 4100.
LEDs should return to a Green state in about 60 seconds.
• Power LED
• Ethernet LED
• DSL LED
2. Open a browser and access the 5100B/4100 modem GUI using the
URL http://192.168.0.1.
***Warning:
· Do NOT unplug the power cord and turn off the power.
· Do NOT turn off the modem using the power button during
a Reset back to factory default.
30. The software will configure and train the DSL Modem
31. Close the installation program
32. Remove the CD from the disk drive and store in a safe location
33. Upon completion of this step, you will be able to access the internet by
opening a browser and specifying a valid address (i.e. http://www.att.com)
34. If the process fails to install the modem correctly, or if you can’t access the
internet, call your support center at 1-866-920-5228, option 1 for assistance
35. Thank you for choosing AT&T as your broadband access provider
36. Happy surfing!