Mls - Minnesota Lapidary Supply

Transcription

MLS
Price
$1.00
Minnesota Lapidary Supply
“YOUR LAPIDARY SUPPLY GENERAL STORE”
America’s Supplier of Quality Lapidary Products FOR OVER 50 YEARS!!!!
2014 – 2015 CATALOG
DIAMOND
WHEELS
LAPS
DISKS
COMPOUND
DRILL BITS
TUMBLERS
SOME OF THE MANY
MANUFACTURES WE
STOCK AND REPRESENT:
AMERITOOL
BARRANCA
COVINGTON
DIAMOND PACIFIC
DONEGAN OPTICAL
SAWS
EASTWIND
The M.L.S.
WAREHOUSE
ESTWING
The ROCK STORE
FOREDOM
GRAVES
GRYPHON
HI-TECH DIAMOND
KEYSTONE
ABRASIVES
ARBORS
LAPCRAFT
LORTONE
LOT-O-TUMBLER
MK DIAMOND
MLS
SAW BLADES
Sun. & Mon. ------- Closed
Tue. thru Fri. ----- 9:00 am to 5:30 pm (CST)
Sat. ------------------ 9:00 am to 4:00 pm (CST)
OPEN ALL YEAR LONG!!!!
RAYTECH
REENTEL
TRU-SQUARE
ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
ANY PRINTING ERRORS ARE SUBJECT TO CORRECTION
MLS
MLS Trademark Registered - Minnesota Lapidary Supply
201 N. Rum River Drive
Princeton, MN 55371
Ph/Fax: (763) 631-0405 email: [email protected]
TOLL FREE ORDER PHONE: (888) 612-3444
WEB SITE: www.lapidarysupplies.com
“YOUR LAPIDARY
GENERAL STORE”
MLS
Order Toll Free: (888) 612-3444
Web Site: www.lapidarysupplies.com
Dear Customers, Please meet the staff:
“JOSEPHINE & VAL”
“DEE”
SALES ASSOCIATE
ROCKS and Things
OWNERS
These are the people you will be talking to when you call in or stop by.
“JEN”
SHIPPING &
RECEIVING
As you can see from this our latest catalog, we have expanded. There is so much new lapidary
equipment and supplies on the market it was just time to expand our offerings. So to, since I
acquired the business 9 years ago, we have grown.
Some of the new items we have to offer include:
1. New rotary flat laps from Hi-TECH Diamond found on page 17.
2. Several new trim saws found on pages 21 and 22.
3. New diamond belts and wheels as well as a new resin bonded CERIUM OXIDE belts and
discs found on pages 34, 35 and 37.
4. A new Foredom accessory, a right angle grinder that is driven by the Foredom rotary
flexible shaft tool, found on pages 19 and 20.
5. New DIAMOND Ultra laps, found on page 39.
6. A complete series of crinkle diamond tipped core drills, these range in size from 4 mm
(5/32”) O.D. to 35 mm (1 13/32") O.D. by 1 mm increments. They are very cost effective.
Find them on page 41 of this catalog.
These and other exciting new lapidary tools.
Sincerely,
Val B. Carver
02
Val B. Carver, Owner
“YOUR LAPIDARY
GENERAL STORE”
MLS
TABLE OF CONTENTS
TYPES OF ITEMS
PAGES
1. TUMBLERS and TUMBLER PARTS ---------------------------------------------------04 to 06
2. ABRASIVES / POLISHES / CARRIERS / GRIT KITS -----------------------------06 to 09
3. LARGE EQUIPMENT:
A. BUFFERS ---------------------------------------------------------------------------09
B. ARBORS -----------------------------------------------------------------------------10 to 11
C. ARBOR PACKAGES -------------------------------------------------------------11 to 14
D. ROCK DRILLING SYSTEMS ---------------------------------------------------15
E. DIAMOND ROUTER TABLE----------------------------------------------------15, 24
F. MISC. LARGE EQUIPMENT----------------------------------------------------- 16 to 20, 24
G. SAWS -------------------------------------------------------------------------------20 to 24
H. PUMPS ------------------------------------------------------------------------------23
I. SPHERE CUTTERS -------------------------------------------------------------25
J. U.V. LIGHTS ------------------------------------------------------------------------25
K. FACETING EQUIPMENT -------------------------------------------------------26 to 27
4. SAW BLADES -------------------------------------------------------------------------------28 to 30
5. LUBRICANTS --------------------------------------------------------------------------------31
6. GRINDING WHEELS ----------------------------------------------------------------------31 to 33
7. SANDING / POLISH BELTS -------------------------------------------------------------34 to 35
8. POLISHING DRUMS / FELT WHEELS -----------------------------------------------35 to 36
9. DISCS -----------------------------------------------------------------------------------------36 to 39
10. FACEPLATES (Polishing Discs) -------------------------------------------------------39 to 40
11. DIAMOND DRILL AND CARVING BITS ---------------------------------------------40 to 41
12. DIAMOND CARVING BITS AND BURS ---------------------------------------------42
13. DIAMOND POWDER, PASTE AND SPRAY ----------------------------------------43
14. MISC. TOOLS, EQUIPMENT AND SUPPLIES ------------------------------------44 to 46
15. ROCKHOUND TOOLS -------------------------------------------------------------------47
16. BOOKS:
A. The “AGATE” Books -------------------------------------------------------------48 to 49
B. COLLECTING ----------------------------------------------------------------------49
C. GEOLOGY---------------------------------------------------------------------------50
D. GOLD ---------------------------------------------------------------------------------50
E. JEWELRY MAKING ---------------------------------------------------------------50 to 51
F. LAPIDARY ARTS ------------------------------------------------------------------51
F. METAL WORKING ----------------------------------------------------------------51 to 52
G. ROCKS, MINERALS, GEMS and FOSSIL I.D. ----------------------------52 to 53
H. TUMBLING --------------------------------------------------------------------------53
17. NOTES ----------------------------------------------------------------------------------------54
18. ORDER FORM -----------------------------------------------------------------------------55
03
TUMBLERS AND TUMBLER PARTS
“YOUR LAPIDARY
GENERAL STORE”
MLS
LORTONE ROTARY ROCK TUMBLERS (POLISHERS):
These rock polishers are quiet, sturdy, economical and simple to
operate and deliver excellent results. All units feature rubber barrels
with quick-seal closure and a continuous duty fan cooled motor.
Instruction book included with all Lortone rock tumblers.
3A
100016*
EQUIPMENT DESCRIPTION
20 Lb. Cap., Lortone Model C20, 1/3
Hp., 115 VAC., motor included
2 - 20 Lb. Cap., Lortone Model C20-2,
1/3 Hp., 115 VAC., motor included
40 Lb. Cap., Lortone Model C40,
1/3 Hp., 115 VAC., motor included
PRICE
$680.00
$920.00
$770.00
LORTONE TUMBLER BARRELS - Additional tumbler barrels.
MLS PART
NUMBER
PRICE
$94.00
$142.00
$139.00
$139.00
3 Lb. Cap., Lortone Model 3A
3 - 1 ½ Lb. Cap. Barrels, Model 3-1.5B
2 - 3 Lb. Cap., Lortone Model 33B
4 ½ Lb. Cap. Barrel, Lortone Model 45C
LORTONE
45C
MLS PART
NUMBER
100022
SMALL CAPACITY TUMBLERS
100002
100004
100006
100008
COMMERCIAL LARGE CAPACITY TUMBLERS
100018*
3-1.5B
LORTONE
MLS PART
NUMBER
100102
100104
100106
100108
100110
100112*
100114
1 ½ Lb. Capacity, Lortone Model 1.5NR
3 Lb. Capacity, Lortone Model 3NR
20 Lb. Capacity, Lortone Model 20SR
40 Lb. Capacity, Lortone Model 40SR
PRICE
$29.00
$32.75
$46.00
$61.50
$77.00
$285.00
$350.00
LORTONE TUMBLER MOTORS - Replacement tumbler motors.
MLS PART
NUMBER
QT12
QT6
QT66
33B
MEDIUM CAPACITY TUMBLERS
MLS PART
NUMBER
100010
100012
100014
6 Lb. Cap., Lortone Model QT6
2 - 6 Lb. Cap. Barrels, Model QT66
12 Lb. Cap., Lortone Model QT12
100030
100032
100034
3A Tumbler Kit, 3 Lb. Capacity
33B Tumbler Kit, 2 - 3 Lb. Capacity
45C Tumbler Kit, 4 ½ Lb. Capacity
Motor for Old Lortone 1.5 Tumbler
$22.00
100204
$30.50
100206
Motor for Lortone Models 3 - 1.5B, 3A,
33B or 45C
Motor for Lortone Models QT6, QT66 or
QT12
100208
Motor for Lortone Models C-20 or C-40
$228.00
MLS PART
NUMBER
$199.00
$239.00
$219.00
100302
100304
100306
$123.00
$167.50
$167.50
* - Item not normally stocked
C40
04
Lortone Models 1.5B and 3A Tumblers
Lortone Models 3-1.5B, 33B or 45C
Tumblers
All Lortone Model QT Tumblers
PRICE
$1.90
$2.30
$6.60
LORTONE TUMBLER PARTS
MLS PART
NUMBER
PRICE
COMMERCIAL LARGE CAPACITY TUMBLERS
C20-2
$71.50
REPLACEMENT BELTS FOR LORTONE TUMBLERS
PRICE
WE STOCK MANY PARTS FOR MOST TUMBLERS
CURRENTLY MANUFACTURED, PLEASE CONTACT US IF
YOU ARE LOOKING FOR PARTS
C20
PRICE
100202
TUMBLER KITS: Everything you need to tumble polish a batch of
rocks including tumbler, abrasives, polish, plastic pellets and ROCKS.
MLS PART
NUMBER
PARTS DESCRIPTION
100402
100404
100406
100408
100410
100412
100414
100416
100418
100420
100502
100504
1½ or 3 Lb.. Drum Boot Gasket
100506
QT6, QT66 or QT12 Tumbler Bearing
Set of 4
4½ Lb. Drum Boot Gasket
6 or 12 Lb. Drum Boot Gasket
1½ & 3 Lb. Inner Drum Lid with Stud
4½ Lb. Inner Drum Lid with Stud
6 or 12 Lb. Inner Drum Lid with Stud
1½ & 3 Lb. Drum Outer Lid
4½ Lb. Drum Outer Lid
6 or 12 Lb. Drum Outer Lid
Knurled Nut and Lid Washer
1.5E or 3A Tumbler Bearing Set of 4
3-1.5B, 33B or 45C Tumbler Bearing Set
PRICE
$4.85
$5.95
$7.55
$4.00
$7.10
$8.20
$4.90
$7.15
$9.15
$2.85
$6.80
$3.80
$11.80
TUMBLERS AND TUMBLER PARTS
“YOUR LAPIDARY
GENERAL STORE”
MLS
THUMLER’S TUMBLER PARTS
NEW
LORTONE TUMBLER PARTS
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
Model B Replacement Motor, 115 VAC.
DRIVE AXEL - QT6 Tumbler
$5.30
$7.60
106200
106302
106100
106402
106404
$91.55
$6.45
$149.15
$9.10
$7.55
100730
DRIVE AXEL - QT12 and/or QT66
Tumbler
$8.75
106405
Model B Replacement Lid Gasket,
TRIPLE THICKNESS
$15.00
100711
IDLER AXEL - 3A Tumbler
$4.60
106406
Model B Replacement Drum Liner
$60.25
$29.40
$84.90
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
100710
DRIVE AXEL - 3A Tumbler
$4.60
100715
DRIVE AXEL - 3-1.5B and/or 33B
Tumbler
DRIVE AXEL - 45C Tumbler
$6.80
100720
100725
Model B Replacement Belt
Model B Replacement Drum, Complete
Model B Replacement Drum Lid, Metal
Model B Replacement Lid Gasket, Std.
100716
IDLER AXEL - 3-1.5B and/or 33B
Tumbler
$6.80
106108
3# DRUM, Replacement/Extra for
models T, A-R1, T2 and AR2
100721
100726
IDLER AXEL - 45C Tumbler
106110
IDLER AXEL - QT6 Tumbler
$5.30
$7.60
9# DRUM, Replacement/Extra for Model
AR6
100730
IDLER AXEL - QT12 and/or QT66
Tumbler
$8.75
106112
12# DRUM, Replacement/Extra for
Model AR12
MOTOR PULLEY - 3A, 3-1.5B, 33B and/
or 45C Tumbler
MOTOR PULLEY - QT6, QT12 and/or
QT66 Tumbler
$2.50
106426
106428
3# DRUM LID, Replacement
100604
$3.45
$5.55
$5.25
106430
$5.05
100606
DRIVE AXEL PULLEY - 3A Tumbler
$2.55
106302
DRIVE BELT for ALL Model A and B
Series Tumblers, Replacement
$6.45
100607
DRIVE AXEL PULLEY - 3-1.5B, 33B
and/or 45C Tumblers
DRIVE AXEL PULLEY - QT6, QT12 and/
or QT66 Tumbler
PULLEY AND DRIVE BELT COVER QT6, QT12 and/or QT66 Tumbler
$5.60
106304
DRIVE BELT for ALL Model T Tumblers,
Replacement
$3.35
106432
LID RETAINER RING for ALL 3# and
12# Drums
$4.10
106438
106210
106220
106230
LID RETAINER RING for 9# Drums
100605
100608
100616
$7.10
$14.00
WE STOCK MANY OTHER PARTS
FOR LORTONE TUMBLERS OF
ALL MODELS
VIBRATORY TUMBLERS
Model B
U-V 18
U-V 10 U-V 45
106090
MODEL B, 15 Lb. Capacity
MOTOR, Model “T2” Tumbler, 115 VAC.
106002
106004
106006
MODEL U-V 10, 10 Lb. Capacity
106202
106204
106206
106102
106104
106106
Replacement Motor for U-V 10
U-V 10 DRUM, Replacement/Extra
PRICE
$344.10
$496.60
$973.20
$118.80
$207.75
$207.75
$90.05
$122.85
$289.15
WE STOCK MANY PARTS FOR MOST
TUMBLERS CURRENTLY MANUFACTURED,
PLEASE CONTACT US IF YOU ARE LOOKING
FOR PARTS THIS INCLUDES:
BELT, Inc., COVINGTON, DIAMOND PACIFIC,
LORTONE, and TRU-SQUARE
THUMLER’S TUMBLER (Rotary)
MLS PART
NUMBER
MOTOR, Model “T” Tumbler, 115 VAC.
$4.70
$75.20
$41.00
$59.40
THUMLER’S TUMBLER (Vibratory)
MLS PART
NUMBER
ROTARY TUMBLERS
MOTOR, Model “A” Tumblers, 115 VAC.
$141.15
PRICE
$295.90
05
TUMBLERS AND TUMBLER PARTS / ABRASIVES
“YOUR LAPIDARY
GENERAL STORE”
MLS
VIBRATORY TUMBLERS
VIBRA-SONIC TUMBLERS
BELT, Inc.
DOUBLE
SINGLE BARREL, 4 Lb. Capacity
DOUBLE BARREL, 8 Lb. Capacity
PRICE
$209.95
$284.95
LOT-O-TUMBLER PARTS
MLS PART
NUMBER
101200
101100
101102
101500
101502
PRICE
108008*
MINI-SONIC, Model MT-10, 10 Lb.
Capacity Hoppers, Variable Speed
$498.00
108010*
MINI-SONIC, Model MT-14, 3 - 4 Lb.
$599.00
108014*
MINI-SONIC, Model MT-14, 1 - 4 Lb. and 1 -
$599.00
108016*
Capacity Hopper, Variable Speed
10 Lb. Capacity Hoppers, Variable Speed
$599.00
VIBRA-SONIC TUMBLERS PARTS
SINGLE
101000
101010
MLS PART
NUMBER
CALWAY “LOT-O-TUMBLER” (VIBRATORY)
This great vibratory tumbler processes 4 pounds of rocks, start to finish
in as little as 5 to 12 days depending on material hardness. This unit
can process anything that will fit through the 2 ¼" opening including
slabs, cabs and preforms. Polish metal and findings. Unit will not be
damaged by running dry. Solid rubber barrel is easily removed for
cleaning. Motor has ball bearings and cooling fans for long life. This
tumbler has the power to do the job. It has been asked of me, if you
could only choose one tumbler, what would it be? THIS IS IT!!!
MLS PART
NUMBER
PARTS DESCRIPTION
Replacement Motor, Ball Bearings
Replacement Drum with Cap
Replacement Cap
Replacement Springs, Set of 6
Replacement Set of Fans, Set of 2
PRICE
$99.95
$47.00
$2.00
$11.50
$25.00
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
108102
MICRO-SONIC 2 Lb. HOPPER, with Lid,
Replacement / Extra
$37.55
108104
MINI-SONIC 4 Lb. HOPPER, with Lid,
Replacement / Extra
$59.00
108106
Replacement / Extra
$118.00
108108
Replacement / Extra
$177.00
108402
LID for 2 Lb. HOPPER,
Replacement / Extra
$18.50
108403
LID FOR 4 Lb. HOPPER,
Replacement / Extra
$18.50
108404
Replacement / Extra
$21.00
108406
Replacement / Extra
$29.00
VIBRA-SONIC
If you love ANTIQUES, you’ll love ROCKS, they are
natures natural ANTIQUES!!!!
ABRASIVES
MT-4SV
All MLS abrasives, polishes and carriers are made from NEW VIRGIN
product, materials are not recycled or reclaimed!!! MLS purchases only
the best quality materials. (I use this stuff myself!!!!)
1 Pound Silicon Carbide
Containers
5 Pound Silicon Carbide Containers
TUMBLING GRADE SILICON CARBIDE
MLS PART
NUMBER
VIBRA-SONIC TUMBLERS
MLS PART
NUMBER
108004
MINI-SONIC, Model MT-4SV, 4 Lb.
Capacity Hopper, Variable Speed
$283.00
108006*
$498.00
* - Item not normally stocked.
118501
118101
118201
118301
118401
PRICE
06
20 mesh, Extra-Extra Coarse, 1 Lb.
46/70 mesh, Extra Coarse, 1 Lb.
60/90 mesh, Coarse, 1 Lb.
150/220 mesh, Medium, 1 Lb.
500F mesh, Fine, 1 Lb.
PRICE
$4.75
$4.25
$4.25
$4.50
$7.70
ABRASIVES / POLISHES / CARRIERS
“YOUR LAPIDARY
GENERAL STORE”
MLS
118505
118105
118205
118305
118405
20 mesh, Extra-Extra Coarse, 5 Lbs.
46/70 mesh, Extra Coarse, 5 Lbs.
60/90 mesh, Coarse, 5 Lbs.
150/220 mesh, Medium, 5 Lbs.
500F mesh, Fine, 5 Lbs.
PRICE
$21.40
$19.15
$19.15
$20.25
$34.65
LINDE A
SPECIALTY POLISHES
LAPPING GRADE SILICON CARBIDE
119001
119101
119201
119301
119401
119501
119601
119701
119801
119005
119105
119205
119305
119405
119505
119605
119705
119805
80LG mesh, 1 Lb.
120LG mesh, 1 Lb.
180LG mesh, 1 Lb.
220LG mesh, 1 Lb.
360LG mesh, 1 Lb.
400LG mesh, 1 Lb.
600LG mesh, 1 Lb.
1000LG mesh, 1 Lb.
1200LG mesh, 1 Lb.
80LG mesh, 5 Lbs.
120LG mesh, 5 Lbs.
180LG mesh, 5 Lbs.
220LG mesh, 5 Lbs.
360LG mesh, 5 Lbs.
400LG mesh, 5 Lbs.
600LG mesh, 5 Lbs.
1000LG mesh, 5 Lbs.
1200LG mesh, 5 Lbs.
143004
143008
143016
142004
142008
142016
142104
142108
142116
PRICE
$4.75
$5.15
$5.15
$4.90
$7.65
$7.65
$8.00
$12.05
$14.70
$21.40
$23.20
$22.05
$22.05
$34.40
$34.40
$36.00
$54.25
$66.15
120101
120201
120301
120105
120205
120305
400 mesh, AO (Aluminum Oxide), 1 Lb.
600 mesh, AO, (Aluminum Oxide), 1 Lb.
800 mesh, AO, (Aluminum Oxide), Lb.
PRICE
SUPER CERIUM OXIDE, +75%, 4 Oz.
SUPER CERIUM OXIDE, +75% 8 Oz.
SUPER CERIUM OXIDE, +75%,1 Lb.
TIN OXIDE **, 4 Oz.
TIN OXIDE**, 8 Oz.
TIN OXIDE**, 1 Lb.
LINDE A, 4 Oz.
LINDE A, 8 Oz.
LINDE A, 1 Lb.
$31.50
$63.00
$120.00
$9.50
$17.95
$34.10
$33.35
$66.70
$127.00
POLISHES
MLS PART
NUMBER
140150
140101
140201
140301
140401
140451
140501
140601
140701
140801
140901
140105
140205
140305
140405
140455
140505
140605
140705
140805
140905
ALUMINUM OXIDE ABRASIVES
MLS stocks many different type of BULK (powdered) polishes for many
types of rocks, tumblers and lapping devices. If you have a question
call us, we will try to help in your selection of the correct polish.
Please note our TXP polish. It provides a SUPERIOR polish for
hard rocks (e.g. - agates, petrified wood, jaspers, etc.) in any type
of rotary tumbler.
It is a micron alumina product that is
essentially non-toxic.
FOR QUANTITIES OF ABRASIVES, POLISHES AND
CARRIERS LARGER THAN 5#, CONTACT US FOR OUR
BULK ABRASIVES PRICE LIST
MLS PART
NUMBER
SUPER CERIUM
OXIDE
TIN OXIDE
MLS PART
NUMBER
MLS PART
NUMBER
TUMBLING GRADE SILICON CARBIDE
MLS PART
NUMBER
PRICE
$7.20
$8.10
$8.50
$32.40
$36.45
$38.25
HAVE FUN WITH ROCKS,
IT’S A GREAT HOBBY!!!!!
07
PRICE
CERIUM OXIDE, (Optical Grade), 1/2 Lb.
CERIUM OXIDE, (Optical Grade), 1 Lb.
CHROME OXIDE, 1 Lb.
LEVIGATED ALUMINA, (Micron Alumina),1
Lb.
LUSTERITE, 1 Lb.
PRE-POLISH SPA3, (Micron Alumina),
1 Lb.
#61 RAPID POLISH, (Submicron Alumina),
1 Lb.
RED ROUGE, (Soft Metal Polish), 1 Lb.
TITANIUM DIOXIDE, (Titanium Oxide), 1 Lb.
TRIPOLI, 1 Lb.
TXP, (Micron Alumina), 1 Lb.
CERIUM OXIDE, (Optical Grade), 5 Lb.
CHROME OXIDE, 5 Lb.
LEVIGATED ALUMINA, (Micron Alumina),
5 Lb.
LUSTERITE, 5 Lb.
PRE-POLISH SPA3, (Micron Alumina), 5 Lb.
#61 RAPID POLISH, (Submicron Alumina),
5 Lb.
RED ROUGE, (Soft Metal Polish), 5 Lb.
TITANIUM DIOXIDE, (Titanium Oxide), 5 Lb.
TRIPOLI, 5 Lb.
TXP (Micron Alumina), 5 Lb.
$15.75
$30.00
$14.80
$6.10
$9.00
$7.35
$15.25
$15.20
$7.00
$3.40
$8.95
$135.00
$66.60
$27.45
$40.50
$33.10
$68.60
$68.40
$31.50
$15.30
$40.25
ABRASIVES / POLISHES / CARRIERS
“YOUR LAPIDARY
GENERAL STORE”
CERAMIC
PELLETS
SMALL
MLS
If you love ANTIQUES, you’ll love ROCKS, they are
natures natural ANTIQUES!!!!
STICK POLISHES
COARSE WALNUT SHELLS
WONDERBAR
CERAMIC
PELLETS
LARGE
CERAMIC
PELLETS
TUMBLING
MIX
BRASS POLISHING MEDIA
RED ROUGE
FABULUSTRE
PLASTIC PELLETS
PRICE
STICK (BAR) POLISHES
130001
BRASS POLISHING MEDIA, 15 Oz.
$8.20
MLS PART
NUMBER
131101
CERAMIC PELLETS, (Small, 5/32" X 5/16"),
$5.60
1 Lb.
TRIPOLI or
XXX WHITE DIAMOND
BROWN TRIPOLI - Use on metal for a dull finish.
FABULUSTRE - Use to polish stone, glass, and metals.
RED ROUGE - To put a high polish on soft metals like silver, brass,
copper and gold.
ZAM - To polish soft stones like turquoise, coral etc.
WONDERBAR - To polish plastic, soft or hard stones.
XXX WHITE DIAMOND - To polish plastics.
CARRIERS AND FILLERS
MLS PART
NUMBER
ZAM
PRICE
142100
142110
142200
142210
142300
142400
142410
BROWN TRIPOLI, Polishing Stick, 4 Oz.
ZAM, Polishing Stick, 1 Lb.
$4.00
$13.00
$5.00
$9.50
$5.35
$5.00
$9.50
142500
XXX WHITE DIAMOND, Polishing Bar, 2
Lb. Bar.
$13.00
142800
WONDERBAR, Polishing Bar, 5.2 Oz.
$3.80
BROWN TRIPOLI, Polishing Bar, 2 Lb.
131201
CERAMIC PELLETS, (Large, 3/8" X 5/8"),
1 Lb.
131301
CERAMIC PELLETS (Fused Brown Aluminum
Oxide), 1 Lb.
$12.00
131401
CERAMIC PELLETS, Tumbling Mix
(Equal parts of our 3 different ceramic pellets), 1 Lb.
$7.00
132001
136001
134001
DEBURRING MEDIA, (Epoxy Pyramids), 1 Lb.
STEEL SHOT, (Mixed shapes), 1 Lb.
$7.50
$4.35
$10.00
133001
STAINLESS STEEL SHOT, (Balls, Angle
cuts & UFO’s. Pins added upon request.), 1 Lb.
$21.10
135001
130005
WALNUT SHELLS, (Coarse), 1 Lb.
142600
FABULUSTRE POLISHING CLOTH,
Real Jewelers’ Rouge on the polishing
side, buff cloth other side
$6.90
BRASS POLISHING MEDIA, 60 Oz.
$3.00
$31.90
131105
CERAMIC PELLETS, (Small, 5/32" X 5/16"),
5 Lb.
$25.20
142700
$9.00
131205
CERAMIC PELLETS, (Large, 3/8" X 5/8"),
5 Lb.
HULL & BRASS MEDIA BOOSTER
#505, by Thumlers Tumbler for use in
U-V series tumblers, 4 Oz. bottle
$14.85
131305
CERAMIC MEDIA, (Fused Brown Aluminum
Oxide), 5 Lb.
$42.00
131405
CERAMIC PELLETS, Tumbling Mix, (Equal
parts of our 3 different ceramic medias), 5 Lb.
$31.50
132005
136005
134005
DEBURRING MEDIA, (Epoxy Pyramids), 5 Lb.
STEEL SHOT, (Mixed shapes), 5 Lb.
$33.75
$19.60
$45.00
133005
STAINLESS STEEL SHOT, (Balls, Angle
cuts & UFO’s. Pins added upon request.), 5 Lb.
$94.95
135005
WALNUT SHELLS, (Coarse), 5 Lb.
$13.50
PLASTIC PELLETS, Floatable, 1 Lb.
PLASTIC PELLETS, Floatable, 5 Lb.
$3.30
FABULUSTRE, Polishing Stick, 4 Oz.
FABULUSTRE, Polishing Stick, 1 Lb.
RED ROUGE, Polishing Bar, 5 Oz.
ZAM, Polishing Stick, 4 Oz.
WE HAVE MANY OTHER BAR / STICK POLISHES AVAILABLE TO
US, GIVE US A CALL FOR A PRICE QUOTE.
GRIT KITS
SINGLE USE GRIT KITS
MLS PART
NUMBER
If you love ANTIQUES, you’ll
love ROCKS, they are natures
natural ANTIQUES!!!!
08
PRICE
115110
3 Lb. Rotary Tumbler, Single Use, 4Step Kit
$6.75
115120
4 or 4 ½ Lb. Rotary Tumbler, Single
Use, 4-Step Kit
$9.50
115130
6 Lb. Rotary Tumbler, Single Use, 4Step Kit
$10.25
115140
4 ½ Lb. Vibratory Tumbler, Single Use,
3-Step Kit
$3.75
115150
10 Lb. Vibratory Tumbler, Single Use,
3-Step Kit
$4.85
GRIT KITS / BUFFERS / ARBORS
“YOUR LAPIDARY
GENERAL STORE”
MLS
MLS TUMBLING GRIT AND POLISH KITS FOR ALL
ROTARY TUMBLERS
MLS TUMBLING GRIT AND POLISH KITS FOR
VIBRATORY TUMBLERS
MLS 4 ‘N 1 REGULAR SIZED GRIT KIT FOR ROTARY TUMBLERS
with SPECIAL TXP POLISH
MLS REGULAR SIZED GRIT KIT FOR VIBRATORY TUMBLERS
(Enough to Polish 10 pounds of rocks in a ROTARY TUMBLER)
KIT CONTAINS:
2 Lb. 150/220 mesh MEDIUM (Step 1) Silicon Carbide Abrasive
1 Lb. 500F mesh FINE (Step 2) Silicon Carbide Abrasive
½ Lb. #61 RAPID (Step 3) Polish
KIT CONTAINS:
1 Lb. 60/90 mesh COARSE (Step 1) Silicon Carbide Abrasive
½ Lb. TXP (Step 4) Polish
MLS Part # 115200
MLS Part # 115500
Price $18.90
MLS LARGE SIZED GRIT KIT FOR VIBRATORY TUMBLERS
MLS 4 ‘N 1 LARGE SIZED GRIT KIT FOR ROTARY TUMBLERS
with SPECIAL TXP POLISH
KIT CONTAINS:
2½ Lb. #61 RAPID (Step 3) Polish
(Enough to Polish 50 pounds of rocks in a ROTARY TUMBLER)
KIT CONTAINS:
MLS Part # 115600
5 Lb. 60/90 mesh COARSE (Step 1) Silicon Carbide Abrasive
2½ Lb. TXP (Step 4) Polish
MLS Part # 115400
Price $21.65
Price $95.70
MLS REGULAR SIZED GRIT KIT FOR VIBRATORY FLAT LAPS
KIT CONTAINS:
Price $78.45
2 Lb. 180LG mesh MEDIUM (Step 1) Silicon Carbide Abrasive
1 Lb. 600LG mesh FINE (Step 2) Silicon Carbide Abrasive
1/2 Lb. TIN OXIDE (Step 3) Polish
MLS Part # 115800
MLS GRIT AND POLISH KITS FOR
VIBRATORY FLAT LAPS
Price $32.65
MLS LARGE SIZED GRIT KIT FOR VIBRATORY FLAT LAPS
KIT CONTAINS:
NEW
10 Lb. 180LG mesh MEDIUM (Step 1) Silicon Carbide Abrasive
5 Lb. 600LG mesh FINE (Step 2) Silicon Carbide Abrasive
2 1/2 Lb. TIN OXIDE (Step 3) Polish
MLS Part # 115900
Price $139.00
BUFFERS
LORTONE COMPACT JEWELER’S METAL BUFFER
Portable buffer for the camper, demonstration or in the workshop. This
buffer has a variable speed foot control for a 0 - 5,000 rpm operation.
1/20 horsepower, 115 VAC, motor delivers more power than most
small buffers this size. Sturdy metal frame and a Formica base for
easy clean-up.
Comes complete with everything needed to get started:
Bristle brush wheel
Ring sander mandrel
Muslin buff wheel
Cotton buff wheel
Red rouge polish
Tripoli polish
MLS # 200100
Price: $169.50
COVINGTON 6" JEWELER’S METAL BUFFER
All metal construction, powerful 1/3 Hp., 115 Vac, 3,450 RPM motor.
Powder coated Covington Green metal finish. Includes integral filter
and dust collector. Exhaust fan delivers 157 CFM airflow. Two (2)
tapered spindles attached to the direct drive motor shaft will
accommodate buffing wheels up to 6" diameter.
Comes complete with everything needed to get started:
1 - 4" Flannel Buff.
1 - 4" Muslin buff.
1 - Red rouge polish bar, 1 Lb.
1 – Instruction set.
MLS # 200500
09
Price: $450.00
ARBORS
“YOUR LAPIDARY
GENERAL STORE”
MLS
BUILD YOUR OWN “ARBOR” WITH
LORTONE EQUIPMENT
NS-8L LONG SHAFT
ARBOR
NS-8 STANDARD SHAFT
ARBOR
SPLASH
SHIELD
LORTONE ARBOR MODEL NS-8
This arbor is heavy duty cast
aluminum construction with sealed
ball bearings.
It has an 8"
diameter wheel capacity, ¾"
threaded shaft, plated wheel
flanges, stepped pulley for speed
changes and has rear or under
bench motor mount capability.
Build your own custom cab unit by
adding splash shields, diamond or
silicon carbide drums or wheels
and polishing heads. Drive “V” belt
included. Standard shaft extends
2 ½” in length; long shaft extends
8 ¼" in length
TOOL REST
MLS PART
NUMBER
PRICE
200200
ARBOR, Lortone, Model NS-8 (Std. Shaft)
$285.00
200210
ARBOR, Lortone, Model NS-8L (Long
$295.00
200300
Shaft)
SPLASH SHIELD, Lortone, Model SS-8,
(Aluminum construction, 2 part, with drain and hold
down bracket.)
200310
TOOL REST, Lortone, Model ST-8
100208
MOTOR, Leeson or equal, 1/3 Hp., 1725
RPM, 115 VAC, with 3 - prong 6 foot
long cord set, manual reset thermal
overload, ball bearings, open drip proof
design.
BA-84
(Designed for use with the SS-8 Tool Rest)
$55.00
$29.50
$228.00
LORTONE BEAVER ARBORS
Lortone provides the largest selection of arbors on the market today.
LORTONE
Beaver arbors are available in two styles those being the CLASSIC
and STAINLESS STEEL. The CLASSIC arbors are constructed of
powder coated mild steel. The new line of STAINLESS STEEL arbor
are constructed of 18-8 stainless steel wetted parts - NO RUST under
normal usage.
Steady, durable two, four and six wheel arbors with ¾" threaded
shafts are ideal as starter units or complete cabochon machines. Use
these arbors to custom build your own machine, using your choice of
drum or wheel for grinding or sanding. End of shaft is threaded to
accept ¼ - 20 screwed disc. Rubber mounted sealed ball bearings
and full hinged tops on classic units with removable tops on stainless
steel units for easy access for maintenance. Complete with spacers,
wheel flanges and shaft nuts. The motor supplied with the motorized
version is 1/3 Hp, 115 VAC.
BA-62
STAINLESS
STEEL ARBORS
MLS PART
NUMBER
PRICE
MLS PART
NUMBER
(WITH MOTOR)
PRICE
200400
$275.00
200450
$477.85
6"
200405
$422.00
200455
$617.50
4
6"
200410
$320.00
200460
$520.60
BA-64 STAINLESS STEEL
4
6"
200415
$467.00
200465
$660.25
BA-66 CLASSIC (Mild Steel)
6
6"
200420
$340.00
200470
$539.60
6
6"
200425
$487.00
200475
$679.25
2
8"
200430
$310.00
200480
$511.10
2
8"
200435
$457.00
200485
$650.75
4
8"
200440
$340.00
200490
$539.60
4
8"
200445
$487.00
200495
$679.25
NUMBER OF
WHEELS
DIAMETER OF
WHEELS
2
6"
2
10
10
(NO MOTOR)
Category
description
ARBORS
“YOUR LAPIDARY
M
L
S
GENERAL STORE”
MLS
innesota
apidary upply
REENTEL INTERNATIONAL ARBORS
Reentel International now has a 6 wheel 6" arbor on the market. The
arbor is perfect to build up your own customized Arbor. Each arbor
has a ¾” threaded shaft and removable hoods for easy access. The
end of the shaft is threaded to accept a ¼-20 screwed disc. Arbor
comes complete with spacers, shaft nuts, wheel flanges and installed
pulley with drive belt. Three options are available:
NEW
8 ½”
Model 66-MS: Beige in color, ALL Mild Steel.
Model 66-MX: Black powder Mild Steel Hood with Stainless
Steel Pan, Center Column and Shaft.
Model 66-SS: ALL STAINLESS STEEL construction.
26"
13"
TO MOUNT MOTOR CUSTOMER MUST PROVIDE MOUNTING BASE
REENTEL INTERNATIONAL ARBORS
MLS PART
NUMBER
PRICE
MLS PART
NUMBER
(WITH MOTOR)
PRICE
230100
$323.10
230110
$523.55
6"
230200
$400.00
230210
$596.60
6"
230300
$450.00
230310
$644.10
NUMBER OF
WHEELS
DIAMETER OF
WHEELS
66-MS Mild Steel
6
6"
66-MX Mixed Material
6
66-SS ALL Stainless Steel
6
(NO MOTOR)
ARBOR PACKAGES
MLS Model 2-SC-6 GRINDER / POLISHER
2 Wheel 6" Silicon carbide Arbor Combo
INCLUDES:
1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC
1 - 6" X 1" 100 Mesh Silicon Carbide (Black) Grinding Wheel
1 - 2 ½" X 6" Heavy Duty Expandable Sanding Drum
3 - Each of 100, 220, 400 and 800 Mesh, 2 ½" X 18 15/16" Silicon
Carbide Waterproof Cloth Belts
1 - Heavy duty 6" Cast Aluminum Polishing Head with Felt Pad
1 - 1 Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive
1 - Overhead Watering system
1 - Set of Safety Goggles, Belt Safety Guard, Flanges and Shaft Spacers
Price of Items if Purchased Separately is over: $771.25
MLS Part #: 290100
4 Wheel 6" Silicon carbide Arbor Combo
INCLUDES:
1 - 6" X 1" 100 and 220 Mesh Silicon Carbide (Black) Grinding Wheel
2 - 2 ½" X 6" Heavy Duty Expandable Sanding Drum
3 - Each of 100, 220, 400 and 800 Mesh, 2 ½" X 18 15/16" Silicon
1 - ½ Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive
1 - Set of Safety Goggles, Belt safety Guard, Flanges and Shaft Spacers
MLS Part #: 290110
Price: $874.50
11
Price: $733.00
ARBOR PACKAGES
“YOUR LAPIDARY
GENERAL STORE”
MLS
2 Wheel 8" Silicon Carbide Arbor Combo
INCLUDES:
1 - 8" X 1 1/2" 100 Mesh Silicon Carbide (Black) Grinding Wheel
1 - 3" X 8" Heavy Duty Expandable Sanding Drum
3 - Each of 100, 220, 400 and 800 Mesh, 3" X 25 7/32" Silicon
MLS Part #: 290120
Price: $825.05
4 Wheel 8" Silicon Carbide Arbor Combo
INCLUDES:
1 - 8" X 1 1/2" 100 and 220 Mesh Silicon Carbide (Black) Grinding Wheel
2 - 3" X 8" Heavy Duty Expandable Sanding Drum
3 - Each of 100, 220, 400 and 800 Mesh, 3" X 25 7/32" Silicon
Price of Items if Purchased Separately is over: $1,040.40
MLS Part #: 290130
Price: $988.40
MLS MINI 6 X 4" DIAMOND GRINDER / POLISHER
6 X 4" Diamond Wheel Arbor Combo
1 - 4" X 1 1/4" 80 & 220 Mesh Diamond Pacific Galaxy Diamond Grinding Wheel
1 - 4" X 1 ¼" 280, 600, 1,200 & 3,000 Mesh Diamond Pacific Nova Diamond Sanding / Polish Wheels
2 - 4" Canvas Faced Polishing Discs
1 - 8,000 and 14,000 Mesh 2 gram tube of Diamond Polish Compound
1 - 2.5 Oz. Spray can of Gem Lube
1 - Under wheel Water Fountain
1 - Book “How To Use Diamond Abrasives”
1 - Moffat Flex Lamp with 100 watt Halogen Bulb
1 - Bottle, Water aid, 8 oz., Concentrate
Price of Items if Purchased Separately is: $1,359.15
MLS Part #: 290130
Price: $1,291.20
WE HAVE MANY OTHER CONFIGURATIONS OF ARBORS AVAILABLE!! PLEASE
GIVE US A CALL FOR A QUOTATION ON A CUSTOM DESIGNED ARBOR
SYSTEM!!! ALL ARBOR SYSTEMS SHOWN ARE ALSO AVAILABLE IN
STAINLESS STEEL AT ADDITIONAL COSTS.
12
ARBOR PACKAGES
“YOUR LAPIDARY
GENERAL STORE”
MLS
MLS
“KNAPPER”
A Grinding / Sanding Arbor SPECIFICALLY DESIGNED for FLAKE OVER
GRINDING Flint Knapping
INCLUDES:
NEW
1 - 6" X 1 1/2" 60 Mesh metal bonded Diamond “HOG” wheel
1 - 6" X 1 1/2" 220 Mesh metal bonded Diamond “CLEAN-UP” Wheel
1 – 2 ½” X 6" Expandable Sanding Drum
3 – Each of 100, 220, 400 and 800 Mesh 2 ½” X 18 15/16" Silicon Carbide water proof cloth Sanding Belts
1 - 6" Felt Polishing Disc with 1/2 Lb. of #61 Rapid Polish
1 – Overhead Watering Drip system
1 – Safety Glasses and Super Sponge
1 - Set of Safety Goggles, Belt Safety Guard, Flanges, Shaft Spacers
OPTION #1:
Equipped with LANCER Diamond Wheels
Price of Items if Purchased Separately is: $995.15
MLS Part #: 291010
Price: $895.65
OPTION #2: Upgrade the “KNAPPER” with replacement of the 60
Mesh PLATED “HOG” wheel with a 60 Mesh SINTERED DIAMOND
WHEEL (This wheel will give you +20X the life of the plated wheel and cuts
at the same FAST speed all of its life):
MLS Part #: 291020
Price: $1,054.05
MLS
“BIG KNAPPER”
A Grinding / Sanding Arbor SPECIFICALLY DESIGNED for FLAKE OVER
GRINDING Flint Knapping
INCLUDES:
NEW
1 - 8" X 1 1/2" 60 Mesh metal bonded Diamond “HOG” wheel
1 - 8" X 1 1/2" 220 Mesh metal bonded Diamond “CLEAN-UP” Wheel
1 – 3" X 8" Expandable Sanding Drum
3 – Each of 100, 220, 400 and 800 Mesh 3" X 25 7/32" Silicon Carbide water proof cloth Sanding Belts
1 - 8" Felt Polishing Disc with 1/2 Lb. of #61 Rapid Polish
1 – Overhead Watering Drip system
1 – Safety Glasses and Super Sponge
1 - Set of Safety Goggles, Belt Safety Guard, Flanges, Shaft Spacers
OPTION #1:
Equipped with LANCER Diamond Wheels
Price of Items if Purchased Separately is: $1,182.90
MLS Part #: 291030
Price: $1,064.60
OPTION #2: Upgrade the “KNAPPER” with replacement of the 60
Mesh PLATED “HOG” wheel with a 60 Mesh SINTERED DIAMOND
WHEEL (This wheel will give you +20X the life of the plated wheel and cuts
at the same FAST speed all of its life):
MLS Part #: 291040
The CAB KING 6 by Reentel International
All Diamond Grinding/Sanding/Polishing Arbor
1 - ¼ Hp., 1,800 RPM, 115 VAC, Motorized Direct Drive Arbor with clean water pump
system
1 - 6" X 1 1/2" 80 and 220 Mesh metal bonded Diamond Wheels
1 - 6" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh resin bonded Diamond Wheels
1 - Polish accessory kit including canvas disc, diamond paste, goggles and apron
1 - 6" 360 Mesh electroplated full face diamond lap
1 - 18" Flex Stem Lamp
Some of the features of the GEM KING 6:
Removable plastic pans and removable aluminum hoods
Water drainage system to eliminate constant emptying of pans
Adjustable fresh water drip system independently adjustable for each wheel
Footprint 30" L X 22" W, 1 Box 56 Lb. shipping weight
MLS Part #: 220000
Price: $1,399.00**
13
Price: $1,244.60
ARBOR PACKAGES
“YOUR LAPIDARY
GENERAL STORE”
MLS
The CAB KING 8 by Reentel International
All Diamond Grinding/Sanding/Polishing Arbor
1 - 3/4 Hp., 1,800 RPM, 115 VAC, Motorized Direct Drive Arbor with clean water
pump system
1 - 8" X 1 1/2" 80 and 220 Mesh metal bonded Diamond Wheels
1 - 8" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh resin bonded Diamond Wheels
1 - Polish accessory kit including canvas disc, diamond paste, goggles and apron
1 - 8" 360 Mesh electroplated diamond flat lap
Some of the features of the GEM KING 8:
Removable heavy duty plastic pans and stainless steel hoods
Water drainage system to eliminate constant emptying of pans
Adjustable fresh water drip system
Extremely WIDE wheel spacing
Footprint, 42" L X 15.5" W, 3 boxes, 65 Lb., 55 Lb., 25 Lb.
SOME ASSEMBLY REQUIRED!!!
MLS Part #: 220100*
Price: $2,399.00**
The PIXIE from Diamond Pacific
All diamond Grinding / Sanding Arbor
1 - 1/8 Hp., 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash shields and tray
1 - 4" X 1 ¼" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels
1 - 4" X 1 ¼" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels
1 - 4" Untreated Canvas Polishing Disc
1 - 14,000 Mesh tube of Diamond Polish Compound
1 - Geyser under wheel water pump
1 - Safety Glasses, Water Aid, Handy Cab Rest, Instruction Manual
MLS Part #: 200600*
Price: $1,529.00**
The GENIE from Diamond Pacific
1 - 1/4 Hp., 1800 RPM, 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash
shields and trays
1 - 6" X 1 1/2" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels
1 - 6" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels
1 - 5 ½"" Untreated Canvas Polishing Disc
2 - Geyser under wheel water pumps
(Note: The magnifier shown no longer comes with the machine shown, this is a option)
MLS Part #: 200610*
Price: $2,225.00**
The TITAN from Diamond Pacific
1 - 3/4 Hp., 1,800 RPM, 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash
shields and tray
1 - 7 5/8" X 1½" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels
1 - 7 5/8" X 2" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels
1 - 5 ½" Untreated Canvas Polishing Disc
1 - Geyser under wheel water pump
(Note: Only one lamp comes with the unit, the second lamp in shown in the picture is an option.)
MLS Part #: 200620*
* - Item not normally stocked, special order item.
** - Special shipping charge for item.
14
Price: $3,740.00**
ROCK DRILLING SYSTEMS & ROUTER TABLE
“YOUR LAPIDARY
GENERAL STORE”
MLS
ROCK DRILLING SYSTEM
DELUXE ROCK DRILLING
SYSTEM
NOTE: THIS SYSTEM IS DESIGNED FOR A DRILLING A MAXIMUM OF ¼” Dia. HOLES
EVERYTHING YOU NEED TO DRILL HOLES IN ROCKS. SYSTEM
INCLUDES:
1 - INDUSTRIAL GRADE DRILL PRESS, Variable speed
motor with 2 ranges 0 to 3,000 RPM and 0 to
5,000 RPM, 115 VAC
1 - Integral DIGITAL Depth Gauge
1 - Coolant delivery system. System includes Tank, Pump
and Magnetic Base delivery spray nozzle with
interchangeable nozzles
6 - Spare, Extra -Fine Nozzles (Red)
1 - Maple Drilling Block
1 - 8 Oz. bottle Diamond Lube
1 - Stainless Steel Magnetic Base coolant recovery/splash
tray
1 - Adjustable Mini-Vise
1 pkg. - 6 pc. Diamond Drill Bit Assortment set, 1 mm to
3 ½ mm
NOTE: THIS SYSTEM IS DESIGNED FOR A DRILLING A MAXIMUM OF ¼” Dia. HOLES
EVERYTHING YOU NEED TO DRILL HOLES IN ROCKS. SYSTEM
INCLUDES:
1 - 3 Speed Drill Press, 1,000, 2,500 & 5,000 RPM, 115 VAC
1 - Coolant delivery system. System includes Tank, Pump
and Magnetic Base delivery spray nozzle with
interchangeable nozzles
6 - Spare, Extra-Fine Nozzles (Red)
1 - Maple Drilling Block
1 - 8 Oz. bottle Diamond Lube
1 - Stainless Steel Magnetic Base coolant recovery/splash
tray
1 - Adjustable Mini-Vise
1 pkg. - 6 pc. Diamond Drill Bit Assortment, ¾ mm to
2 ½ mm
MLS Part #: 293000
Price: $409.30
MLS Part #: 293010
PARTS FOR ROCK DRILLING SYSTEM
The GRYPHETTE router table
diamond grinder is just what is
needed to preshape your cabs.
Large 6 5/8" by 6 5/8" table
allows large pieces to be edge
ground. Includes water splash
guard.
MLS PART
NUMBER
The Gryphette is made from
engineered high impact plastic
with a 5 year warranty on parts
and workmanship.
Powerful DC motor operates off of 110 VAC. Unit comes with ¾"
diamond grinder bit.
MLS Part #: 292000
GRYPHETTE
GRINDING HEADS
AVAILABLE
See page 42
Price: $81.25
LAMP or TAPER
Price: $485.25
15
PRICE
293101
293102
CHUCK KEY for Rock drilling System
DRIVE BELT for Rock Drilling System
$7.90
$10.00
293151
CHUCK KEY for Deluxe Rock drilling
System
$10.60
293152
DRIVE BELT for Deluxe Rock drilling
System
$8.95
293200
Complete COOLANT DELIVERY
SYSTEM with Tank, Pump, X-former,
Mag. Base Nozzle Stand
$56.95
293210
EXTRA FINE (Red) Nozzles, 6 pc.
293220
Extra PUMP and X-FORMER for
Coolant delivery System
$22.95
293300
293400
293500
MAPLE DRILLING BLOCK
$7.50
$20.00
$21.95
STAINLESS STEEL MAGNETIC TRAY
ADJUSTABLE MINI VISE
$8.95
LARGE EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
Lortone VIBRATORY LAPS PARTS
LORTONE COMBINATION UNIT,
MODEL LU6X-130
This popular complete combination unit can complete each step from
rough to finish cabochons in one compact, durable and economical
machine.
Sealed rubber mounted ball bearings and ¾" shaft
shouldered to ½" for the 6" trimming blade. Hinged wheel guard shield
for easy wheel access and cleaning. Unit is designed with saw blade
coolant tank, blade guard, water fittings and drain plugs, 1/3 Hp. Motor,
115 VAC, motor mount, pulleys, belt, belt guard clear plastic splash
hood over trim saw, trim saw vise, cab templates, aluminum scribe,
cerium oxide polish, dop sticks, dop wax, 6" X 1" 100 mesh silicon
carbide grinding wheel, 6" X .025" diamond saw blade, 6" X 2 ½"
Lortone EXP sanding drum, 3 silicon carbide sanding belts and one
polishing disc with rubber and felt pad installed.
This is a great introductory unit for the lapidary arts!!!!
LU6X-130
MLS PART
NUMBER
PRICE
250200
15" GRIND PAN, Fits either Lortone
OLD FL or NEW OS Models FLAT LAP
$112.00
250205
15" POLISH PAN, Fits either Lortone
$119.00
250210
20" GRIND PAN, Fits either Lortone
$178.00
250215
20" POLISH PAN, Fits either Lortone
$189.00
250220
15" FELT POLISH PAD, Fits either
Lortone OLD FL or NEW OS Models
FLAT LAP
$13.50
250230
20" FELT POLISH PAD, Fits either
Lortone OLD FL or NEW OS Models
FLAT LAP
$16.50
250240
Lortone OLD Series FL SUSPENSION
BALLS, Set of 3
$11.75
250240
Lortone OLD Series FL PAN
CENTERING SPRINGS, Set of 3
$8.00
A complete line of parts are available for both the Lortone OLD
model FL and NEW model OS VIBRATORY FLAT LAPS.
Please call for price and availability.
LORTONE
MLS Part #: 260000
Price: $769.00
VI-BRO LAP
Totally reengineered in 2010.
Faster cutting, very quiet
operation. New larger motor.
Motor is isolated from the
vibrating portions of the lap.
Power is transmitted from the
motor to the pan via a rubber vbelt.
DIAMOND PACIFIC - VI-BRO-LAPS brand flat laps are industrial
grade equipment. The tempered aluminum lap plate is grooved in a
crisscross pattern. This permits abrasive particles to circulate between
the lap plate and the work piece so that the abrasive itself is
continuously being crushed to a smaller size. When the work piece
surface is ground flat and satin smooth, the lap plate is turned over to
the other side on which a polishing pad is cemented. Using a polishing
compound on this pad, a fine mirror like finish is produced on the work
piece.
VIBRATING/OSCILLATING FLAT LAPS
Flat vibratory/oscillating laps are used to polish flat surfaces on rocks.
We feature the Lortone brand but also handle several other brands of
vibratory laps including Covington, Raytech and Diamond Pacific.
The unit is constructed from a heavy duty welded steel frame. The
grinding plate is suspended by aircraft strength cable. Unit is driven by
a 1/3 Hp. Motor, 115 VAC.
The Lortone laps are rugged vibrating laps for fast precision grinding of
slabs, geodes, bookends, clock faces and other flat stones. Pans
change in seconds. Quiet, fast and efficient trouble free operation; ideal
for the hobbies. Both units come with 115 VAC motors standard.
MLS PART
NUMBER
FLAT LAP, Lortone, Model OS-15, 15"
Dia., TWO PAN SYSTEM
$865.00**
250110
FLAT LAP, Lortone, Model OS-20, 20"
Dia., TWO PAN SYSTEM
$995.00**
PRICE
251000*
FLAT LAP, Diamond Pacific, Model
20VL, 20" Dia.
$2,010.00**
251010*
FLAT LAP, Diamond Pacific, Model
27VL, 27" Dia.
$2,330.00**
PRICE
250100
MLS PART
NUMBER
A complete line of parts are available for Diamond Pacific
VI-BRO-LAPS. Please call for price and availability.
16
LARGE EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
UNIVERSAL HEAVY DUTY GRINDING AND POLISHING
MACHINE by AMERITOOL
Each Ameritool Machine Includes:
1 - ¼ Hp. Variable speed Ball Bearing DC Motor with 115 VAC converter and coolant reservoir with splash shield
1 - Accessory Kit Containing:
1 - 180 Mesh diamond Grinding Disc. Disc is hydraulically pressed to a backing plate
1 - Each of a 325, 600 and 1,200 Mesh Diamond Sanding PSA Disc with backing plates
1 - White Polish Pad with 14,000 Diamond Polish compound and backing plate
6" UNIVERSAL HD, complete with accessories
MLS PART #: 252010
Price: $559.00
6" BASIC, without discs and accessories
MLS PART #: 252020
Price: $399.00
8" UNIVERSAL HD, complete with accessories
MLS PART #: 252030
Price: $659.00
8" BASIC, without discs and accessories
MLS PART #: 252040
Price: $399.00
ALL-U-NEED HORIZONTAL LAP MACHINE
by HI-TECH DIAMOND
NEW
Each Hi-Tech Diamond Machine Includes:
1 - 180 Mesh Metal Bond Diamond Grinding Disc
1 - White Polish Pad with 14,000 Mesh, 2 gr. Diamond Polish compound and backing plate
6" ALL-U-NEED, complete with accessories:
MLS PART #: 280010
Price: $489.50
6" ALL-U-NEED BASIC, without discs and accessories:
MLS PART #: 280020
Price: $389.00
MLS PART #: 280030
Price: $589.95
MLS PART #: 280040
Price: $399.00
SLANT CABBER
by HI-TECH DIAMOND
NEW
The SLANT CABBER is a unique angled flat lap machine that allows for easy viewing while you grind flats, rework quartz crystals
or make millimeter and free-form cabochons. The angled design allows the user to easily see the material they are working on.
Each SLANT CABBER machine Includes:
1 - 180 Mesh Metal Bond Diamond Grinding Disc
1 - White Polish Pad with 14,000 Mesh, 2 gr. Diamond Polish compound and backing plate
MLS PART #: 280110
Price: $499.50
MLS PART #: 280120
Price: $399.50
MLS PART #: 280130
Price: $599.50
MLS PART #: 280140
17
Price: $419.00
LARGE EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
The BD-125
PORTABLE WET DIAMOND POLISHER
by Barranca/MK Diamond
This is one of the best equipment items to come on the market in the last few years. The
equipment consists of a variable speed right angle grinder with a specially adapted water
injection head, the water is injected in the center of the shaft. The other innovation is a set of
diamond impregnated resin discs held on to the head with Velcro. Disc change takes
seconds!!! I use one of these myself and love it. I am still using most of my original discs 8
years later.
Complete Kit comes With:
1 - Wet Electric Polisher with plug-in G.F.I., 115 VAC
1 - Set of 10 - 4" Diamond Resin Pads, 30 to 13,000 Mesh
1 - 4" Rubber Velcro Backer
1 - 4" Coarse Brazed Diamond Hard Wheel
1 - 4" Flat Surfacing Hard Wheel
1 - Set of Wrenches
1 - Carry Case and Instruction set
MLS Part #: 261000
MLS PART
NUMBER
Price: $680.00
PARTS DESCRIPTION
MLS PART
NUMBER
PRICE
261002
4" RUBBER VELCRO BACKER PAD
$18.00
261004
4" TURBO DIAMOND DISC, Hard Disc,
Coarse, Very aggressive grinding
$130.00
261006
4" FLAT FACING DIAMOND DISC, Hard
Disc, Medium Mesh Diamond
$150.00
261008
4" RESIN DIAMOND FLEX DISC, 30
Mesh Diamond
$40.00
261010
Mesh Diamond
$40.00
261012
Mesh Diamond
$40.00
261014
Mesh Diamond
$40.00
261016
Mesh Diamond
$40.00
The BD-125 Wet Diamond
Grinder/Sander/Polisher Kit
PARTS DESCRIPTION
PRICE
261018
Mesh Diamond
$40.00
261020
4" RESIN DIAMOND FLEX DISC, 1,800
Mesh Diamond
$40.00
261022
Mesh Diamond
$40.00
261024
Mesh Diamond
$40.00
261026
4" RESIN DIAMOND FLEX DISC,
10,000 Mesh Diamond
$40.00
261028
4" RESIN DIAMOND FLEX DISC,
13,000 Mesh Diamond
$40.00
261030
261032
261034
MOTOR BRUSHES, Set of 2
$14.00
$70.00
$18.00
INDUSTRIAL GRADE G.F.I.
4" FELT BUFF PAD, Velcro backed
POWERED HAND TOOL by FOREDOM
MLS Stocks the #2272 GENERAL APPLICATIONS KIT. This kit includes:
1 - “SR” Type Powered Head, ball bearing motor, 1/6 Hp. Reversible, 18,000 RPM max.,
115 VAC
1 - No. 30 Hand piece (Equipped with #0 Jacobs Chuck)
1 - FCT Foot Control
1 - No. 21 Accessory Kit (84 piece “Bit and Burr” Kit)
1 - CK-0 Chuck Key with Plastic Handle
1 - Tube of Shaft Grease
#2272 GENERAL APPLICATIONS KIT
MLS PART #: 240000
H-30 Handpiece with 3 jaw chuck
and chuck key.
Replace the
original or use as an alternative.
Fits all Fordomes.
No. CK-0 CHUCK KEY. #0 Chuck
Key in Plastic Handle. For #30,
30SJ, 25C and 30H hand pieces.
MLS PART #: 241020
Price: $68.00
MLS PART #: 241002
Price: $6.00
18
Price: $345.00
LARGE EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
Plastic mini vise. Has hor. and
ver. “v” grooves for holding small
round pieces. Jaw capacity 1 ½"
deep 1 3/16" wide.
MLS PART #: 241016
Price: $18.00
MLS
H.15 Handpiece, Turn your
Foredom Powered Hand Tool
into a mini “JACKHAMMER”.
Great for detailing fossils and
clean-up of specimens.
Zinc die cast mini vise. Has hor.
and ver. “v” grooves for holding
small round pieces.
Jaw
capacity 1 ½" deep 1 3/16" wide.
MLS PART #: 241010
Price: $26.00
MLS PART #: 241004
Price: $139.00
Table top “Yoke” mount for
your Foredom power heads.
Made of cast iron.
MLS PART #: 241012
Price: $49.00
DRILL PRESS STAND by Foredom
Wrap your fingers and save
them. Give your fingers a
“rubber tip”. Roll is 2" by 15'.
Table top SPEED control. Set
the dial to desired speed.
Replaces foot type speed
controls for series SR motors.
MLS PART #: 241022
Price: $4.30
MLS PART #: 241018
Price: $69.00
A rugged and precise stand which
converts your Foredom flexible shaft
power tool into a drill press. The
sturdy, all metal stand is fully
adjustable, has a 2" throat capacity
and a stroke length up to 1 ¼".
MLS PART #: 241008
Price: $169.00
DISC GRINDER HEAD KIT
Table mount
motor hanger
for
your
Foredom
rotary power
heads.
Mounts
to
table
ledge
with metal cclamp.
Use this device to store
and organize your points
and burs.
Holds many
dozens of burs with various
shank sizes including
1/16", 3/32", 1/8" and 1/4"
diameter shafts. 7" wide
and 4" tall.
MLS PART #: 241006
Price: $16.50
by Foredom
NEW
Tool fits on the standard
H-30 hand piece only.
Turns your Foredom rotary
tool into a right angle Disc
Grinder.
HEAD WITH FLAPPER SANDING DISC
HEAD ATTACHED TO H-30 HAND PIECE
Alternate
base to screw
to work bench
is
available
for
$20.00
more.
Some of the many functions you can perform
with this tool include hog out wood, smooth
metal, polish stone and/or blend and texture
metals.
Complete LAPIDARY kit includes wrenches needed to attach the
grinder head to the H-30 hand piece. Kit also includes:
MLS PART #: 241014
Price: $49.00
1 – Angle Grinder Head.
1 – 60 Mesh flexible Diamond PSA GRINDING disc.
5 – Imperial micro finish film PSA SANDING discs, 120,
220, 320, 600 and 1,200 Mesh Diamond.
1 – 4,000 Mesh Diamond PSA SANDING disc.
1 – 50,000 Mesh Cerium Oxide PSA POLISHING disc.
1 – 8 pk. Securing Discs, Velcro one side/PSA other
side. Used to attach discs to hook mandrel.
1 – Rubber hook type disc Mandrel.
1 – Screw-Lok FELT Wheel, 5/16" thick
1 – Misc. including drive pin, long hub with long screw.
WE ARE A STOCKING
DISTRIBUTOR FOR
FOREDOM TOOLS, NEED A
PART GIVE US A CALL!!
MLS PART #: 242000
19
Price: $145.00
LARGE EQUIPMENT & SAWS
“YOUR LAPIDARY
GENERAL STORE”
MLS
NEW
STONE CARVERS KIT by Foredom
FOR USE WITH CUT-OFF TOOL (All Discs 2" Dia.)
PARTS FOR FOREDOM CUT-OFF TOOL
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
242010
LONG HUB, for mounting grinding wheel
and Felt Buffs (Extra – comes with kit).
$4.00
242020
2" FLEXIBLE RUBBER HOOK
MANDREL, For mounting sanding discs.
$5.00
242030
2" P.S.A./LOOP BACK. Apply to various
grinding/sanding/polish discs, 5 pcs.
$4.00
242040
2" 100 Mesh, SILICON CARBIDE
GRINDING WHEEL, Mounts with LONG
HUB, (15,000 R.P.M. Max.).
$4.80
242050
2" METAL BOND GRINDING DISC, 60
Mesh Diamond, Mounts on HOOK
MANDREL, P.S.A. Backed.
$22.70
242060
$19.30
242070
$16.40
242080
$16.40
242090
$16.40
242100
2" RESIN BONDED SANDING DISC,
120 Mesh Diamond, Mounts on HOOK
$4.50
242110
$4.40
242120
$4.40
242130
$4.40
242140
$4.40
242150
1,200 Mesh Diamond, Mounts on HOOK
$4.40
242160
4,000 Mesh Diamond, Mounts on HOOK
$5.80
242170
2" RESIN BONDED CERIUM OXIDE
POLISH DISC, 50,000 Mesh, Mounts on
HOOK MANDREL, P.S.A. Backed.
$5.30
242180
2" KNIFE EDGE HARD FELT WHEEL,
Mounts with LONG HUB, charge with
your choice of polish (20,000 R.P.M. Max.).
$5.60
242190
2" HARD FELT WHEEL, ¾” thick,
Mounts with LONG HUB, charge with
your choice of polish (20,000 R.P.M. Max.).
$15.50
[PADS RATED FOR 10,000 R.P.M., PADS SHOULD BE RUN WET,
MOUNT ON HOOK MANDREL]
NEW
COMES WITH FOLLOWING DISCS:
1 – 60 Mesh METAL BOND DIAMOND GRINDING DISC
1 – 120 Mesh RESIN BOND DIAMOND SANDING DISC
1 – 1,200 Mesh RESIN BOND DIAMOND SANDING DISC
1 – 4,000 Mesh RESIN BOND DIAMOND SANDING DISC
2- 50,000 Mesh RESIN BOND CERIUM OXIDE POLISH
DISCS
10 – P.S.A./LOOP BACKING PADS
MLS PART #: 242500
Price: $78.00
NOTE: ALL WHEELS or DISCS, EXCEPT FOR THE
FELT WHEELS MUST BE RUN WET!!!! ALL DISCS
ARE SUPPLIED WITH P.S.A. BACKS AND MUST
HAVE A “LOOP BACKER PAD” (MLS Part # 242030)
APPLIED TO THEM. ALL DISCS ARE RATED AT
10,000 R.P.M. MAXIMUM!!! WHEEL RATINGS ARE
NOTED FOR EACH WHEEL.
SAWS
4" TRIM
(FACETERS) SAW
by AMERITOOL
The Ameritool 4" Trim Saw is the
perfect tool for trimming glass,
cabochons pre-forms and valuable
faceting materials. The large table has
no inhibiting lip, making it easy to trim oversized slabs. The guard can be raised to
accommodate oversized slabs. The housing is made of durable polyethylene. The variable
speed ¼ Hp. Direct drive motor, 115 VAC, runs fast enough to se ultra thin blades and
powerful enough for up to 5" sintered diamond blades. Uses water based lubricants.
Removable table top makes for easy clean-up.
MLS PART
NUMBER
PRICE
271100
4" TRIM SAW By Ameritool with Blade
and Vise.
$448.00
271110
4" TRIM SAW By Ameritool with BLADE
only NO Vise.
$359.00
271120
VISE ASSEMBLY for 4" Trim Saw by
Ameritool
$89.00
WE STOCK MANY REPLACEMENT
PARTS FOR LORTONE SAWS, PLEASE
CONTACT US IF YOU ARE LOOKING
FOR PARTS, IF WE DON’T HAVE IT IN
STOCK WE CAN ORDER IT FOR YOU.
20
LARGE EQUIPMENT & SAWS
“YOUR LAPIDARY
GENERAL STORE”
MLS
7" TRIM SAW by Barranca
6" BASIC TRIM SAW by Lortone
AFFORDABLE machines that are quality built and don’t cost an arm
and a leg! You can get the job done with this trim saw. Painted mild
steel body with stainless table. Recommended for use with OIL, 1 qt.
capacity. This unit takes up to a 6" diameter diamond blade. Uses ball
bearings capable of high speed operation with thin blades. Unit is
basic and does not include blade or motor. ½" arbor size.
EXTREME heavy duty designed and constructed. Features include
14" X 14" cutting table, direct drive 1/3 Hp. Motor, cast aluminum
wetted parts. Table tilts up and out of the way for cleaning. Includes
fluid drain hose and sludge drain plug. Vise with vertical rock clamp
and adjustable locking cross feed. PETG high impact clear copolymer
splash hood. Includes MK-303 7" blade. Unit requires 2 quarts of
coolant. WATER BASED OR OIL LUBRICANTS CAN BE
USED!!
NEW
MLS Part #: 272100
272120
Price: $149.00
Optional STEEL MOUNTING BASE for
SAW and NEMA 48 motor.
$42.50
6" TRIM SAW by Hi-Tech Diamond
MLS Part #: 272600
All ENGINEERED plastic construction make this saw usable with
WATER!!! Saw has powerful ¼ Hp. variable speed motor. LARGE
table/work surface 6 ½" W X 13" L. Very easy cleanup takes 2 or 3
minutes. Unit requires X quarts of coolant.
The below listed trim saw is, in my opinion, the BEST
trim saw on the market today!!!!!
FS8-C TRIM SAW by Lortone
This trim saws provide a spacious work table and sintered blade can
accommodate larger slabs. To clean, just lift up the table and slide out
the coolant pan. This is the easiest trim to clean I have ever used.
Complete units include hood, vise, belt guard, belt and 1/3 Hp. Motor,
115 VAC, Requires 4 ½ quarts coolant. This saw comes in 2
configurations, semi-stainless steel (Table) or all Stainless Steel. The
semi-stainless steel constructed saw, you must use OIL as a coolant.
The all stainless steel saw you can use WATER or OIL coolants.
Saw
shown
with vise.
MLS PART
NUMBER
272200
272210
272220
Price: $885.00
PARTS DESCRIPTION
PRICE
$439.00
$539.00
$100.00
6" SAW and BLADE, NO VISE
6" SAW, BLADE and VISE
VISE
FS8-C
Lortone
MK-170 by MK Diamond
LORTONE
This economical, heavy-duty trim saw has a large work surface and is
equipped with a MK 303 7" X .065 sintered blade. Includes a sealed
ball bearing ½ Hp. motor, 115 VAC, splash shield, blade guard and
submersible water pump. You can use WATER as a cutting coolant/
lubricant. Unit requires X quarts of coolant.
FS8-C COMPLETE 8" TRIM SAW - SEMI-STAINLESS STEEL CONF.
MLS Part #: 272300
MLS Part #: 272310*
MLS PART
NUMBER
MK DIAMOND
272320
272321
272322
272323
272330
272331
272332
272333
MK-170
MLS Part #: 272400
Price: $670.00
FS8-C COMPLETE 8" TRIM SAW - ALL STAINLESS STEEL CONF.
Price: $282.00
21
PARTS DESCRIPTION
HOOD, Plastic, for LU6X
HOOD, Plastic, for FS6
HOOD, Plastic, for FS8
HOOD, Plastic, for TS8
VISE, for LU6X
VISE, for FS6
VISE, for FS8
VISE, for TS8
Price: $715.00
PRICE
$46.00
$57.00
$56.00
$48.50
$37.50
$37.50
$37.50
$37.50
SAWS
“YOUR LAPIDARY
GENERAL STORE”
MLS
10" TRIM / SLAB SAW by Barranca
10" TRIM SAW by Lortone
ALL STAINLESS STEEL construction allows use of water, water
based or oil coolants!!! Heavy-duty construction, you can turn this saw
on and cut for 8 hours straight without fear or overloading the motor.
Large 14 1/4” by 16 5/8" work surface. Complete with MK-303 10" X
.040" X 5/8" sintered rim blade, manually moved vise, belt guard, plastic
hood and 1/3 Hp. overload protected motor, 115 VAC. Saw requires 2
quarts of cutting fluid.
WATER OR OIL BASED CUTTING
FLUIDS !!!!
This all CAST ALUMINUM saw allows use of water based or oil cutting
fluids. Large 15 3/8" X 191/2” work table, table tilts up and out of the
way for blade change and cleaning. Easy to clean tank with fluid drain
hose and sludge removal plug. Vise rotates out of the way for manual
trim saw use. Motor and saw mounted on unitary polypropylene base.
Fixed power feed rate of 3/16" inch/minute with brass clutch plate.
Complete with BD-303 10" sintered rim blade, power feed vise, plastic
trim shield and 1/3 Hp. overload protected motor, 115 VAC. Saw
requires 1 gallon of cutting fluid.
WATER or OIL BASED
CUTTING FLUIDS!!!
NEW
Lortone
NEW
BARRANCA
LORTONE
BD10
TS10-C
TS10-C COMPLETE 10" HEAVY-DUTY TRIM SAW
BD10 COMPLETE 10" TRIM / SLAB SAW
MLS Part #: 272250
MLS Part #: 272650
Price: $799.00**
10" TRIM / SLAB SAW by Covington
Price: $1,425.00**
LS12 SLAB SAW by Lortone
Use this saw to cut rocks, minerals and glass. Comes complete with
power driven vise for slabbing, allows a cross feed distance of 3 ½”
without reclamping. “Bulldog” vise swings out of the way for hand
trimming. Motor and saw are mounded on an integral cushioned
laminated base. Hold down hook runs under the tabletop so work pieces
can’t climb over the blade. Complete with Covington 10" “GOLD” blade,
plastic shield, belt guard and 1/3 Hp. overload protected ball bearing
motor, 115 VAC. Saw requires 1 gallons of cutting oil. OIL BASED
CUTTING FLUIDS ONLY!!!
This quiet, fully enclosed, professional quality 12" saw is a real
workhorse. The full hinged hood keeps oil mist contained and has a
safety “glass” window for viewing. It features a fixed rate of feed of 8"
per hour. A large capacity vise holds 4 ½" high X 7" long rough. The
cross feed allows several cuts without repositioning. Complete with MK303 12" X .062" X 5/8" sintered rim blade and 1/3 Hp. Overload
protected motor, 115 VAC. Saw requires 2 gallons of cutting oil. OIL
BASED CUTTING FLUIDS ONLY!!!
LORTONE
Drawing for Clarity
NEW
1510TS
Picture of
Actual Saw
LS12C
COVINGTON
Model 1510TS COMPLETE TRIM / SLAB SAW
MLS Part #: 272450
LS12C COMPLETE 12" SLAB SAW
Price: $995.00**
MLS Part #: 272700
22
Price: $1,550.00**
SAWS
“YOUR LAPIDARY
GENERAL STORE”
MLS
PANTHER LSS-14P SLAB SAW by Lortone
LS18 SLAB SAW By Lortone
This high performance saw delivers straight, smooth cuts at twice the
speed of other Lortone saws. It’s quiet, clean, bench top design
increases your cutting capacity without extra space. Constructed with
removable bottom pan for easy clean-up. Power feed rate is fixed at 15"
per hour. A large capacity vise holds 5 1/2" high X 6 1/2" long rough.
The cross feed allows several cuts without repositioning. Complete with
MK-303 14" X .070" X 5/8" sintered rim blade and 1/2 Hp. overload
protected ball bearing motor, 115 VAC. Saw requires 2 ½ gallons of
cutting oil. OIL BASED CUTTING FLUIDS ONLY!!!
This rugged, accurate and economical 18" slab saw has been proven
by years of trouble free performance in commercial operations.
Convenient free standing design allows it to go next to a work bench.
The frame, drive guard and tank are constructed of heavy gauge
welded steel for long life. Easy access is provided by the hinged hood
making loading and set-up simple.
The side window permits
monitoring of the cut. Features shutoff switch, threaded cross feed,
sealed ball bearings and adjustable feed rate of 9 ½" to 19 ¼" per hour.
A large capacity vise holds 7" high X 7" long rough. The cross feed
allows several cuts without repositioning. Complete with MK-303 18" X
.125" X 3/4" sintered rim blade, 1/2 Hp. overload protected ball bearing
motor, 115 VAC and 2" drain. Saw requires 3 1/2 gallons of cutting oil.
OIL BASED CUTTING FLUIDS ONLY!!!
LSS-14P
LS18
LORTONE
LORTONE
LSS-14P COMPLETE 14" SLAB SAW
MLS Part #: 272800
Price: $1,885.00**
PUMPS
LS18 COMPLETE 18" SLAB SAW
MLS Part #: 272900*
MLS PART
NUMBER
272950*
WATER PUMP
OIL & WATER PUMP
MLS PART
NUMBER
PARTS DESCRIPTION
272960*
PRICE
810010
PUMP for Water (Not for use with Oil),
Great for use with arbors and wet
diamond polisher, Submersible, 115
VAC. Very HEAVY DUTY!!!
$90.00
811010
PUMP for OIL or Water, Great for use
with saws and other tools requiring a
forced feed oil supply (e.g. - Lortone
LS14 Drop Saw), Submersible, 115
VAC.
$120.00
272970*
SEE PAGES 28, 29 and 30 FOR A
COMPLETE LINE OF DIAMOND SAW
BLADES and SAW LUBRICANTS
23
Price: $3,750.00**
HP18 18" SLAB SAW By Barranca,
equipped with 18" premium sintered
rim blade, variable rate feed, bronze
clutch system on feed, 1 ½ Hp.
Motor, cuts 6 ½" high by 9" long.
MODEL 703HDS 18" SLAB SAW
By Covington, equipped with 18"
premium notched rim blade, variable
rate feed, clutch system on feed, ½
Hp. Motor, cuts 6 ½" high by 9" long.
clutch system on feed, 1 ½ Hp.
Motor, cuts 9" high by 18" long.
PRICE
$5,315.00**
$4,300.00**
$6,630.00**
272980*
clutch system on feed, 2 Hp. Motor,
cuts 12" high by 18" long.
$7,758.00**
272990*
MODEL 199HDS 36" SLAB SAW
By Covington, equipped with 36"
premium sintered rim blade, variable
rate feed, clutch system on feed, 2
Hp. Motor, cuts 15" high by 26" long.
$12,000.00**
SAWS / LARGE EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
MODEL C DIAMOND BAND SAW by Gryphon
A fast cutting diamond band saw for glass, tile, gemstones and ceramic
ZEPHYR RING SAW by Gryphon
A new saw just out by Gryphon. Similar in design to the
other ring saws on the market. Cutting head removes to
become a portable unit. Unit has a deep throat and large
table with an unobstructed view. Constructed of
engineered glass filled plastics, 115 VAC motor. USES
WATER AS COOLANT!
materials. Cuts different shapes with ease. Cuts a radius as
tight as 3/16". Smooth saw cuts eliminate excessive grinding.
Wear resistant blade travels at 2,000 feet per minute. Direct
drive motor eliminates pulleys. Blade guide beneath the
work surface provides superior support leaving the work
table unobscured. Unit constructed of engineered glass
filled plastics, 115 VAC motor. USES WATER ONLY
AS COOLANT!
GRYPHON
Model C
GRYPHON
MLS Part #: 275000
MLS Part #: 272500
Price: $415.00
$45.50
275110
DRIVE BELT for Zepher Ring Saw.
$32.00
$69.55
275120
RUBBER INSERTS for Drive wheels,
Set of 3 for Zephyr Ring Saw.
$10.20
$7.00
275130
275140
GUIDE WHEEL with Bearing.
$24.00
$20.00
PRICE
272510
BLADE, Diamond, for Gryphon Model C.
$60.95
272514
FUSERS BLADE, Diamond, for Gryphon
Model C.
272520
BLADE GUIDES, for Gryphon Model C
Diamond Band Saw, Package of 4.
GRYPHON
IDLER WHEEL with Bushings.
$20.50
GRYPHON
NEW
WET BELT SANDER/
GRINDER by Gryphon
STUDIO GRINDER
by Gryphon
This grinder is used to put a finishing
edge on rocks and glass. Can also
be used to “rough” grind cabs or
groove an edge of a cab or slab. A
larger version of the “GRYPHETTE”
(as shown on page 15). Larger
table, splash shield and gravity feed
watering system, Powerful 1/5 Hp.
DC motor running at 3,000 RPM..
Uses the same cutting bits used by
the Gryphette. Table measures 9 ¾”
by 9 “. USES WATER ONLY AS
COOLANT!
A fast cutting silicon carbide wet
belt sander. For fast removal of
stock.
This new Gryphon
product presents an entirely new
category of tool for the lapidary
artist. With the large 90 square
inches of grinding surface, you
can now accurately sand straight
lines or true up large curved
surfaces. A small platform helps
to steady your work and tilts for
easy beveling. A variety of belts
available form coarse to ultra
smooth for polishing. Motor is
115 VAC. USES WATER
MLS Part #: 292100
GRINDING
HEADS
AVAILABLE
See page 42
ONLY AS COOLANT!
MLS Part #: 274000
PRICE
BLADE, Diamond, Replacement for
Zephyr Ring Saw
PARTS DESCRIPTION
MAINTENANCE REBUILD KIT for
Model C Saw, Includes upper and lower
wheel bands and lower wheel bearing.
PARTS DESCRIPTION
275100
MLS PART
NUMBER
272532
MLS PART
NUMBER
Price: $406.65
Price: $294.15
See page 34 for Belts
24
Price: $120.00
LAMP or
TAPER
SPHERE CUTTERS
“YOUR LAPIDARY
GENERAL STORE”
MLS
MINI SPHERE GRINDER by Covington
Grind spheres ¼" to 1" diameter. Dual 1/18 Hp. Motors, 115 VAC, automatic grit application,
spring loaded cutting heads and cutting angle adjustment. The downward slanted cutter cups and
shafts run the sphere in a bath of grit. This eliminates the need to constantly dab grit with a brush.
The angle of the cutting cups can be increased as the rough corners of the sphere grind off. Both
heads are spring loaded, so continuous adjustment is unnecessary. Unit comes complete with 1
grit pan, instructions, guarantee and one pair of ¼", 3/8", 5/8" and 7/8" cups.
MLS Part#: 263000
Price: $499.00**
LARGE SPHERE GRINDER by Covington
Dual 1/3 Hp., 115 VAC motors.
Automatic grit application with slurry bowl.
Spring loaded cutting heads.
Cutting angle adjustment.
Shielded arbor shafts and bearings.
Large metal cabinet with shelf.
Makes beautiful spheres 1 ¼" to 9" diameter.
Used silicon carbide cutting grit.
DIAMOND CUPS are
available for this
machine, please contact
us for information and
prices.
The downward slanted cutter cups and shafts run the sphere in a bath of grit. This
eliminates the need to constantly dab grit on with a brush, It also causes the grit
slurry to run away from the bearings. The angle of the cutting cups can be increased
as the rough corners of the sphere grinds off. Both heads are spring loaded, so
continuous adjustment is unnecessary. Unit comes complete with above features, 2
polishing buffs, 2 grit pans, instructions, guarantee and one choice of one pair of
cutter cups. Please state cup size when ordering. DIAMOND CUPS AVAILABLE
AS AN ADDER.
LARGE SPHERE MACHINE
MLS Part#: 264000*
Price: $1,650.00**
U-V LAMPS
VERSALUME by Raytech
RAYTECTOR 5-2 by Raytech
THE MOST VERSATILE & POWERFUL ULTRAVIOLET ON THE
MARKET TODAY. NEW DESIGN ALLOWS USE WITH BATTERIES
OR 115 A/C ADAPTER. Unit has both Longwave and Shortwave
capabilities. Compact design runs off of 4 “AA” batteries or on
provided 115 A/C adapter. Unit incorporates Raytech’s lifetime filters.
4 watt output. Lamp includes the book “The Story of Fluorescence”.
OFFERS BOTH STANDARD A/C &
BATTERY OPERATION. FULL 12 WATT
OUTPUT.
RECHARGEABLE internal
sealed lead acid batteries eliminates
replacements!!! Unit comes with both
Longwave and Shortwave filters. One
full charge of 24 hours gives 5 to 7 hours
of battery operation.
All models are
equipped with built-in charger that plugs
into standard 115 VAC. wall outlet. Lamp
contains dual light tubes and can operate
on one or two tubes.
Single tube
operation extends battery life. Lamp
includes the book “The Story of
Fluorescence”.
VERSALUME
MLS Part #: 730100
MLS Part #: 730200
Price: $105.00
Price: $305.00
MLS is an authorized distributor for AMERITOOL, BARRANCA, BELT Inc., COVINGTON,
DIAMOND PACIFIC, ESTWING, FOREDOM, GRAVES, LAPCRAFT, LORTONE, MK
DIAMOND PRODUCTS, RAYTECH, TRUE SQUARE METAL PRODUCTS and many more!!!
25
FACETING EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
MARK IV FACETING MACHINE by Graves
This is an EXCELLENT introductory unit. Designed specifically for the home or small shop,
small, light-weight, easy to store and portable. An exact duplicate of the proven Mark I machine
except for the motor, switch and cabinet. A high speed permanent magnet motor nestles inside
a 17 ½" cabinet together with a continuous variable speed control of the motor. Faceting head
and mast are investment cast aluminum/magnesium alloy that are machined and fitted to
extremely close tolerances. All spindles and bar stock are precision-turned stainless steel for
maximum durability and lasting beauty. The belt, pulleys and switch along with extra long 3conductor cord are factory assembled and wired to produce a full power continuous variable
speed range of 0 to 600 RPM! Just plug it in and it’s ready to run. The sturdy castings are
assembled on a handsome 9 ½" X 17 ½" walnut mica cabinet for easy cleaning and lasting
beauty. Angle indicator includes a 1/10 degree venire for accurate settings. Unit comes with:
Continuously Variable Motor (0 to 600 RPM), 115 VAC
Aluminum/Magnesium Construction
Accepts Full Sized (8") Laps
Large See-thru Acrylic Drip Tank
Bright 100 watt Flexible Lamp
Accurate Readings to 1/10 Degree
MARK IV COMPLETE WITH STANDARD ACCESSORY PACKAGE
MLS PART #: 210000
Price: $1,330.00
MARK IV FACETING MACHINE ONLY
MLS PART #: 210100*
Price: $1,125.00**
The COMPLETE ACCESSORY KIT for the GRAVES FACETING MACHINES Includes:
8" GROOVED DISC.
360 grit diamond lap, nickel bonded for fast smooth roughing
and preforming.
8" DIAMOND DISC.
1200 mesh diamond lap, metal bonded in nickel for extra-fine
ULTRALAP.
Six pack of Polishing Discs. Selection of three different compounds charged
on a flexible disc. Most popular and cleanest way to polish stones with a hardness less than 9.
DOPS.
Beginning set of metal dops.
BOOK.
“Fundamental Faceting”.
cutting and prepolishing.
8" PLASTIC LAP.
¼" thick, flat acrylic polishing lap. Use as master lap or score for
use with compounds.
BLACK STICK (DOP).
To Purchase this PACKAGE separately:
A heat sensitive adhesive for temporarily bonding the gem
MLS PART #: 215010
to a dop.
Price: $289.00
MARK 5XL FACETING MACHINE by Graves
NEW!!! DIGITAL INDICATING HEAD!!!! Latest technology. With this head replication of
facet angles are assured. Mechanically an exact duplicate of the proven Mark I machine except
for the motor, switch and cabinet. A high speed permanent magnet motor nestles inside a 17 ½"
cabinet together with a continuous variable speed control of the motor. Faceting head and mast
are investment cast aluminum/magnesium alloy that are machined and fitted to extremely close
tolerances. All spindles and bar stock are precision-turned stainless steel for maximum durability
and lasting beauty. The belt, pulleys and switch along with extra long 3-conductor cord are
factory assembled and wired to produce a full power continuous variable speed range of 0 to 600
RPM! Just plug it in and it’s ready to run. The sturdy castings are assembled on a handsome
9 ½" X 17 ½" walnut mica cabinet for easy cleaning and lasting beauty. The unit comes in both
a right hand and left hand mast configuration. (Right handed for right handed people. The unit
also comes in a left hand version, which we do not stock but can special order from the factory.)
Unit comes with:
Continuously Variable Motor (0 to 600 RPM), 115 VAC
Aluminum/Magnesium Construction
Accepts Full Sized (8") Laps
Large See-thru Acrylic Drip Tank
Bright 100 watt Flexible Lamp
Accurate Readings to 0.02 Degree
Standard Dop Set Included
THE MARK 5XL DOES NOT COME WITH LAPS!!!!!!
MARK 5XL RIGHT HAND MAST CONFIGURATION:
MLS PART #: 214000
Price: $1,695.00
26
FACETING EQUIPMENT
“YOUR LAPIDARY
GENERAL STORE”
MLS
STANDARD DOP SET by
GRAVES
PROFESSIONAL DOP SET by
GRAVES
A preferred beginners dop set. This set
includes 14 of the most common used
dops and a table dop (used to cut the
table on a gem). Made of brass and
packaged in a sturdy wooden block for
convenience and easy storage.
This set of 30 dops contains one of
MLS Part #: 212000
each type/size of standard dops that
Graves makes. Made of brass and
packaged in a sturdy wooden block for
convenience and easy storage. Does
not contain the “TABLE” dop.
Price: $55.95
MLS Part #: 212100
Price: $95.95
MACHINE COVER
INDEX PLATES for Graves Machines
KEEP YOUR MACHINE CLEAN!! This crystal clear, rugged vinyl
cover will fit any “machine” measuring 20"L X 18"H X 11"W. Will fit
Graves Mark I, IV and 5XL.
Graves makes 8 different index plates including 32, 40, 48, 64, 72,
80, 96 and 120 tooth. Each plate is machined aluminum. May fit
facet machines other than Graves. Call US to order.
MLS Part #: 212200
MLS Part #: 212300
Price: $7.95
Price: $24.95
MLS IS A STOCKING DISTRIBUTOR FOR GRAVES PRODUCTS. IF WE DO NOT
HAVE IT IN STOCK WE CAN ORDER IT FROM GRAVES. WE ALSO CARY A FULL
LINE OF LAP PLATES AND DISCS, SEE PAGES 38 and 39 OF THIS CATALOG.
FACETRON by Jarvi Tool Co.
A Lapidary Luxury is how most faceter’s describe the Facetron
because of it’s ease of operation, superior quality and precision that
makes it a joy to create beautiful gemstones. Some of the features
of the Facetron include:
Dial Indicator stop system.
Micro-height adjustment.
Two quart water coolant system.
Powerful permanent magnet motor, variable speed, 115 VAC.
Machine used standard 8" diameter, ½" arbor hole discs.
Dop chuck with exclusive cam lock system.
Digital protractor provides 1/10 of a degree angle settings.
Master anchor lever.
Precision index wheel.
Electronic speed control.
GRINDING and POLISH DISCS FOR THIS
MACHINE AVAILABLE ON PAGES 38 & 39!!
Complete Facetron Kit includes all you need to begin making fine gemstones except laps:
The Facetron Owners Manual.
ACCESSORIES AVAILABLE FOR THIS
Faceting Instruction Book.
MACHINE, PLEASE CONTACT US FOR A
A set of 15 dops.
LIST AND PRICES.
Water system.
The complete Facetron machine.
Your choice of any index gear (96 - All Purpose recommended as first index gear).
Acculign Transfer Stand for unequaled precision and ease of use. Locating bar holds keyed dops for perfect
stone transfers.
LIFETIME WARRANTY against defects in materials or workmanship.
MLS PART #: 213000*
Price: $2,695.00**
27
SAW BLADES
“YOUR LAPIDARY
GENERAL STORE”
MLS
ABOUT DIAMOND SAW BLADES IN GENERAL
MLS HAS OVER 400 DIAMOND SAW BLADES IN STOCK. WE STOCK 3 BASIC TYPE OF BLADES, THESE TYPES ARE:
1. NICKEL BONDED RIM DIAMOND BLADES.
2. NOTCHED RIM BLADES.
3. CONTINUOUS SINTERED RIM BLADE.
NICKEL BONDED RIM DIAMOND BLADES - Stocked in sizes from 4" to 10" diameter. Made in thinner thicknesses available in ½" and 5/8"
arbors. Made by bonding the maximum concentration of diamonds to the edge or rim of the blade core. Used for trim saws to preform slabs. For
very rapid cutting with minimum loss of material. Can usually be used with both water based and oil based lubricants. These type blades usually
have a stainless steel core.
NOTCHED RIM BLADES - The old standby in diamond blades for the lapidary industry. Stocked in sizes from 6" to 24" diameters (available up to
36" diameter) in many different thicknesses and arbor diameters. This blade can be used in both trim sawing and slabbing operations. Made by
filling hundreds of “notches” cut into the rim of the a blade with a metal/diamond compound. This compound is “melted” into the notches to hold it
into place. These blades must usually be run in an oil based lubricant. CAUTION: Notched rim blades should be sharpened after every 4th or
5th cut!!!
CONTINUOUS SINTERED RIM BLADES - Perhaps the best technology blade on the market today. Stocked in sizes from 4" to 24" diameters
(available up to 36" diameter) in many different blade thicknesses and arbor diameters. These blades can be used for both trim and slabbing
operations. These blades are made by bonding (sintering) a very thick layer or rim of a specially formulated bronze/brass/diamond mixture to a
steel core. This means as the outer edge of the blade wares away a new fresh layer of diamonds is exposed. Smaller diameter sintered blades
(10" diameter and under) can be run in water based lubricants if the saw body is designed for water. They work exceptionally well when used with
oil based lubricants. Blades of this style larger than 14" diameter are segmented due to differential thermal expansion between the core and edge.
LAPCRAFT’s DIA-LASER DIAMOND SAW BLADES: These plated diamond circular saw blades are essential when cutting precious materials.
They are available in ultra-thin thicknesses which slice with minimal material loss. These blades unique “cutting teeth” are premium, multi pointed
diamond crystals chosen for their strength and sharpness. These cutting points are securely nickel plated onto rust proof, circular full-hard stainless
steel bodies.
J.B.F.C.’s PRO-SLICER: The Pro-Slicer blade is a new concept in plated rim blades. Pro-Slicers are crafted by an entirely new process, from
space age technology. The cutting edge is literally paved with diamonds. Thousands of diamonds are TIGHTLY PACKED onto the edge. Each
and every diamonds is locked in a working position, 100% of the time, from the first slice to the last, allowing you to cut much faster and easier,
This is no SHORT LIFE hobby blade.
BLADE DIAMETER X
CORE THICKNESS
LAPCRAFT DIAARBOR
DIAMETER
KERF
THICKNESS
4" X .004"
1/2"
.010"
4" X .004"
5/8"
.010"
4" X .012"
1/2"
.024"
4" X .012"
5/8"
.024"
5" X .004"
1/2"
.010"
5" X .004"
5/8"
.010"
5" X .012"
1/2"
.024"
5" X .012"
5/8"
.024"
6" X .006"
1/2"
.014"
6" X .006"
5/8"
.014"
6" X .012"
1/2"
.024"
6" X .012"
5/8"
.024"
6" X .024"
5/8" - 1/2"
.045"
8" X .012"
5/8" - 1/2"
.024"
8" X .025"
5/8" - 1/2"
10" X .015"
10" X .032"
LASER
J.B.F.C. PRO-SLICER
MLS PART No.
Price
ARBOR
DIAMETER
$25.00
$25.00
$25.00
$25.00
$27.00
$27.00
$27.00
$27.00
$29.00
$29.00
$29.00
$29.00
$32.00
$44.00
$44.00
1/2"
.007"
5/8"
.007"
1/2"
.016"
5/8"
N/A
.045"
600010
600020
600030
600040
600050
600060
600070
600080
600090
600100
600110
600120
600130
600140
600150
N/A
N/A
N/A
N/A
N/A
N/A
28
KERF
THICKNESS
MLS PART No.
Price
.016"
670010
670020
670030
670040
$23.50
$23.50
$23.50
$23.50
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1/2"
.009"
5/8"
.009"
1/2"
.016"
5/8"
.016"
5/8" - 1/2"
.032"
5/8" - 1/2"
.016"
5/8" - 1/2"
.032"
N/A
5/8" - 1/2"
.019"
N/A
5/8" - 1/2"
.040"
670070
670080
670090
670100
670110
670120
670130
670140
670150
$28.70
$28.70
$28.70
$28.70
$32.10
$40.75
$40.75
$56.30
$60.50
N/A - Not Available
SAW BLADES
“YOUR LAPIDARY
GENERAL STORE”
MLS
The MLS GREEN LANCER is a commercial grade notched rim diamond blade. It can
be used for general purpose work on both trim or slab saws. Recommended for agates, jades,
geodes or industrial lapidary cutting.
MLS SILVER LANCER
NOTCHED RIM DIAMOND SAW BLADES
ARBOR
DIAMETER
KERF
THICKNESS
MLS PART
No.
Price
4" X .006"
5/8" - 1/2"
.009"
4" X .010"
5/8" - 1/2"
.013"
5" X .006"
5/8" - 1/2"
.009"
5" X .010"
5/8" - 1/2"
.013"
6" X .006"
5/8" - 1/2"
.009"
6" X .010"
5/8" - 1/2"
.012"
6" X .012"
5/8" - 1/2"
.015"
610010
610020
610030
610040
610050
610060
610070
$4.00
$4.00
$5.00
$5.00
$6.00
$6.00
$6.00
BLADE ARBOR HOLE
REDUCING BUSHINGS
REDUCTION
SIZE
BUSHING
THICKNESS
REC. BLADE
THICKNESS
MLS PART
No.
Price
5/8" - 1/2"
0.014"
0.014
5/8" - 1/2"
0.020"
.020" to .029"
5/8" - 1/2"
0.030"
.030" to .049"
5/8" - 1/2"
0.050"
.050" to +
3/4" - 5/8"
0.032
.030" to +
620010
620020
620030
620040
620050
620090
620030
620070
620080
$3.00
$3.00
$3.00
$3.00
$4.00
$5.00
$5.00
$5.75
$5.75
1" - 5/8"
0.050"
.050" to .069"
1" – 5/8"
0.070"
.070" to +
1" - 3/4"
0.050"
.050" to .075"
1" - 3/4"
0.075"
.076" to +
The MLS SILVER LANCER notched rim diamond saw blade use premium diamonds
in its construction. They cut great at a low price. Recommended for turquoise, opal, aqua,
tourmaline, garnet, corundum or where yield is a concern.
BLADE DIAMETER X
CORE THICKNESS
BLADE
DIAMETER X
CORE
THICKNESS
ARBOR
DIAMETER
KERF
THICKNESS
MLS PART
No.
Price
6" X .025"
5/8" - 1/2"
.031"
8" X .025"
5/8" - 1/2"
.031"
10" X .031"
5/8" - 1/2"
.044"
12" X .040"
1" - 5/8"
.052"
14" X .051"
1" - 5/8"
.067"
16" X .059"
1" - ¾"
.088"
18" X .059"
1" - ¾"
.088"
20" X .071"
1" - ¾"
.098"
24" X .071"
1" - ¾"
.098"
30" X .071"
1" - ¾"
.098"
36" X .071"
1" - ¾"
.098"
610080
610090
610100
610110
610120
610130
610140
610150*
610160*
610170*
610180*
$16.00
$20.00
$34.00
$50.00
$80.00
$120.00
$150.00
$180.00
$260.00
$550.00**
$800.00**
MLS GREEN LANCER
CRINKLED RIM DIAMOND SAW BLADES
BLADE TYPE SELECTION
FOR ROCKS WITH LESS THAN 20% METAL CONTENT CHOOSE A
DIAMOND BLADE.
FOR METAL WITH LESS THAN 20% ROCK CONTENT CHOOSE A
CBN PLATED BLADE!!
INBETWEEN – “GOOD LUCK”!!!!
WE ALSO HANDLE A LINE OF CBN RIM
PLATED BLADES FOR METEORITES. CALL US
FOR PRICES AND AVAILABILITY.
MK’S MK-297 CRITERION DIAMOND SAW BLADES: These notched rim diamond circular saw blades were the benchmark of the lapidary
industry. The MK-297 diamond blades contains 30% more diamond concentration, the result of compressing the rim to exacting standards and
adding 20% more synthetic man-made diamonds. The thickness of the 1010 cold rolled steel core remains the same and is both hand and
machined tensioned for precision, accurate cutting. These blades were made in the good old U.S.A.!!!! They are no longer made. When our
inventory is depleted, that’s the end of them.
MK’S MK-301 GEM KING DIAMOND SAW BLADES: These notched rim are MK’s premium line of this style blade. A superior lapidary saw
blade with the highest concentration of a special type and grade of man-made diamonds, in a new formulation that cuts hard materials such as
agates and petrified wood with unprecedented speed. These blades are now made in Korea!!!!
BLADE DIAMETER X
CORE THICKNESS
MK DIAMOND MK-297
ARBOR
DIAMETER
MLS PART No.
CRITERION
MK DIAMOND MK-301
GEMKING
Price
ARBOR
DIAMETER
MLS PART No.
Price
6" X .025"
N/A
N/A
N/A
5/8" - 1/2"
650010
$81.00
6" X .032"
5/8" - 1/2"
N/A
N/A
N/A
6" X .040"
5/8" - 1/2"
5/8" - 1/2"
8" X .032"
5/8" - 1/2"
8" X .040"
5/8" - 1/2"
5/8" - 1/2"
650030
650050
650060
$90.00
$101.00
$111.00
8" X .050"
5/8" - 1/2"
N/A
N/A
N/A
9" X .040"
5/8" - 1/2"
$50.00
$52.00
$54.00
$60.00
$64.00
$80.00
$85.00
N/A
N/A
N/A
9" X .050"
5/8" - 1/2"
640020
640030
640050
640060
640070
640080
640090
N/A
N/A
N/A
10" X .025"
N/A
N/A
N/A
5/8" - 1/2"
10" X .032"
N/A
N/A
N/A
5/8" - 1/2"
10" X .040"
5/8" - 1/2"
640120
$95.00 (Felker)
5/8" - 1/2"
650100
650110
650120
$121.00
$132.00
$134.00
10" X .050"
N/A
N/A
N/A
N/A
N/A
N/A
**- Special shipping charges for item.
29
5/8" - 1/2"
N/A - Not Available
SAW BLADES
“YOUR LAPIDARY
GENERAL STORE”
MLS
MK or BD-303
PROFESSIONAL
The
BLADE DIAMETER X
CORE THICKNESS
MK DIAMOND MK-297
CRITERION
MK DIAMOND MK-301
ARBOR
DIAMETER
MLS PART No.
Price
ARBOR
DIAMETER
10" X .064"
5/8" - 1/2"
640140
$120.00
5/8" - 1/2"
12" X .032"
N/A
N/A
N/A
1" - 5/8"
GEMKING
MLS PART No.
Price
$161.00
$184.00
$210.00
12" X .040"
N/A
N/A
N/A
1" - 5/8"
650140
650150
650160
12" X .050"
3/4 - 5/8"
640170
$172.00
N/A
N/A
N/A
12" X .065"
N/A
N/A
N/A
1" - 5/8"
14" X .064"
N/A
N/A
N/A
1" – 5/8"
650180
650210
$210.00
$312.00
14" X .075"
1" - 3/4"
N/A
N/A
1" - 3/4"
1" - 3/4"
16" X .075"
1" - 3/4"
$236.00
$253.00
$308.00
N/A
16" X .060"
640220
640230
640250
18" X .075"
N/A
N/A
N/A
1" - 3/4"
20" X .064"
1" - 3/4"
1" - 3/4"
640280
640290
$325.00
$343.00
1" - 3/4"
20" X .075"
650230
650250
650270
650280
650290
$350.00
$402.00
$478.00
$474.00
$525.00
BLADE DIAMETER X
KERF THICKNESS
1" - 3/4"
1" - 3/4"
MK/BD-303 PROFESSIONAL
ARBOR
DIAMETER
4" X .014"
1/2"
4" X .014"
5/8"
4" X .020"
5/8" - 1/2"
5" X .020"
5/8" - 1/2"
6" X .014"
1/2"
6" X .014"
5/8"
6" X .020"
5/8" - 1/2"
6" X .032"
5/8" - 1/2"
6" X .040"
5/8" - 1/2"
7" X .030"
5/8" - 1/2"
7" X .050"
5/8" - 1/2"
8" X .025"
5/8" - 1/2"
8" X .032"
5/8" - 1/2"
8" X .060"
5/8" - 1/2"
9" X .060"
5/8" - 1/2"
10" X .032"
5/8" - 1/2"
10" X .040"
5/8" - 1/2"
10" X .050"
5/8" - 1/2"
12" X .065"
1" – 5/8"
14" X .070"
1" – 5/8"
16" X .085"
1" - 3/4"
18" X .085"
1" - 3/4"
20" X .100"
1" - 3/4"
24" X .100"
1" - 3/4"
30" X .125"
1" - 3/4"
36" X .200"
1" - 3/4"
MLS PART No.
Price
660010
660020
660030
660040
660050
660060
660070
660080
660090
660095
660100
660110
660120
660130
660140
660150
660160
660170
660180
660190
660200
660210
660220
660230
660240*
660250*
$46.00
$46.00
$48.00
$50.00
$53.00
$53.00
$55.00
$58.00
$62.00
$72.00
$72.00
$72.00
$72.00
$74.00
$75.00
$82.00
$86.00
$106.00
$224.00
$248.00
$294.00
$356.00
$459.00
$776.00
$1,119.00
$1,757.00
MK / BD
Diamond
SAW
BLADES
is currently the state of
the art technology in
diamond saw blades.
The 303 is a sintered
rim blade with very high
diamond content. The
PROFESSIONAL
is
today’s producer of
smooth cuts and are
used for cutting rare
and valuable materials
when waste must be
held to a minimum and
speed
of
cut
is
essential.
This blade
lasts longer and will cut
faster than ordinary
notched rim or plated
diamond blades. They
can
be
used
at
maximum arbor speeds.
I USE THESE BLADES
MYSELF, THEY ARE
THE FINEST BLADE I
HAVE EVER USED!!!!
PLEASE NOTE, BD,
Barranca Diamond is a
wholly owned subsidiary
of MK Diamond. They
are the exact same
blade except for the
label.
MK/BD 303P SINTERED RIM BLADE
For extremely dense hard rock (e.g – Brazilian Agate, Bloodstone) try
this blade. High-grade diamond crystal matrix sintered to high-carbon
steel core. The sintered matrix of this blade is “slightly” softer that the
standard MK/BD 303. This gives better performance when cutting
harder denser material. The matrix wears away faster exposing fresh
diamonds at a faster rate. This blade should be used ONLY with oil
lubricants.
BLADE DIAMETER X
KERF THICKNESS
MK/BD-303P PROFESSIONAL
ARBOR
DIAMETER
7" X .067"
5/8" - 1/2"
8" X .067"
5/8" - 1/2"
10" X .067"
1" – 5/8"
12" X .095"
1" – 5/8"
14" X .095"
1" – 5/8"
MLS PART No.
Price
680010
680020
680040
680050
680060
$91.00
$102.00
$115.00
$141.00
$178.00
IF YOU ARE LOOKING FOR BLADES TO CUT
SPECIALTY/DIFFICULT MATERIALS
CONTACT US. MK DIAMOND HAS WELL
OVER 100 DIFFERENT BLADES THEY
MANUFACTURE.
30
N/A - Not Available
LUBRICANTS
“YOUR LAPIDARY
GENERAL STORE”
MLS PART
NUMBER
MLS
DIAMOND LUBE by MLS, 1 pint, (16
Oz.) add to water, makes 5 gallons.
$12.00
780110
DIAMOND LUBE by MLS, 1 quart,
(32 Oz.) add to water, makes 10
gallons.
$21.60
780300
780310
SLICK-CUT by MLS, 1 gallon
SLICK-CUT by MLS, 5 gallons
$24.00**
$108.00**
780400
TOOL COOL, by Lapcraft, 8 oz.
concentrate
$6.00
780410
TOOL COOL, by Lapcraft, 32 oz. (1
quart), concentrate
780420
TOOL COOL, by Lapcraft, 128 oz. ( 1
gal.), concentrate
780500
WATER AID, by Diamond Pacific, 8
780510
WATER AID, by Diamond Pacific,
780520
WATER AID, by Diamond Pacific,
780600
oz. concentrate
16 oz. (1 pint), concentrate
128 oz. (1 gallon), concentrate
OIL MIST ELIMINATOR, by Lortone,
16 oz. (1 pint), concentrate
DIAMOND LUBE
by MLS, is a water soluble oil
for diamond saw blades, wheels and drill bits. Use on
saw blades 10" in dia. or under. One pint makes 5
gallons.
PRICE
780100
SLICK-CUT
by MLS, this is a special blend of
oils to produce a very high quality mineral oil based
cutting oil. Water clear with almost NO SMELL. We
developed and tested this in house.
TOOL COOL
by Lapcraft, is a water soluble wax
for diamond saw blades, wheels, drill bits and tools.
Use on saw blades 10" or under in diameter. Mix 8 oz.
Of Tool Cool to 1 gallon water. Easy on the skin.
$16.00
$40.00**
WATER AID by Diamond Pacific, is a concentrated
$3.25
wetting agent. It increases cutting action of sawing,
grinding and sanding/polishing. It’s biodegradable and
normally harmless to the skin. Approx. 6 drops per pint
is all that’s needed.
$5.25
OIL MIST ELIMINATOR
by Lortone, To be
added ONLY to PETROLEUM BASED OILS or
MINERAL OIL.
Long chain polymer hydrocarbon
reduces blade friction and oil fogging. One 16 oz.
Container treats 5 gallons oil!
$28.75**
$11.50
MLS PART
NUMBER
DRESSING STICKS
MLS DRESSING STICKS are manufactured from pure virgin
ALUMINUM OXIDE!! You should only used aluminum oxide to
“sharpen” diamond saw blades. Any other material can damage the
blade. You can also use these sticks to “sharpen” sintered diamond
wheels.
PRICE
621000
DRESSING STICK - SMALL, 11/16"
X 11/16" X 4", Package of 3, use on
8" diameter blades and smaller.
$19.50
621010
DRESSING STICK - MEDIUM, 1" X
1" X 6", use on 10" through 14"
diameter.
$11.00
621020
DRESSING STICK - LARGE, 2" X 2"
X 6", use on blades 16" diameter and
larger.
$24.90
GRINDING WHEELS
MLS SILICON CARBIDE Grinding wheels continually present new, sharp faces ideal for stone
grinding. The silicon carbide used in our wheels is hand sorted 100% to National Bureau of
Standards screen sizes. Every wheel is diamond dressed, precision balanced and sonically
tested.
BLACK SILICON CARBIDE GRINDING WHEELS
are the standard of the industry. Manufactured to
give the optimum of fast cutting and wheel life. This
wheel sets the standard for lapidary grinders
everywhere and can be used on all types of stones.
BLACK - SILICON CARBIDE
GRINDING WHEELS
** - Special Shipping Charges for this Item.
GREEN SILICON CARBIDE GRINDING WHEELS
are designed for the lapidarist who desires extra fast
cutting. They are premium quality, softer bonded
wheels that will not glaze even at the highest
speeds.
31
GREEN - SILICON CARBIDE
GRINDING WHEELS
GRINDING WHEELS
“YOUR LAPIDARY
GENERAL STORE”
MLS
BLACK SILICON
CARBIDE WHEELS
GREEN SILICON
CARBIDE WHEELS
WHEEL DIAMETER X
THICKNESS X ARBOR
HOLE
Silicon
Carbide
Mesh
MLS PART No.
Price
MLS PART No.
Price
6" X 1" X 1"
100
430010
6" X 1" X 1"
220
8" X 1" X 1"
100
$40.95
$43.95
$50.00
$52.00
$68.95
$79.95
$80.00
431010
431020
431030
431040
431050
431060
$32.65
$35.90
$45.00
$49.00
$69.90
$72.75
N/A
N/A
431080
431090
$94.90
$104.70
N/A
N/A
431110
$190.00
8" X 1" X 1"
220
8" X 1 1/2" X 1"
100
8" X 1 1/2" X 1"
220
10" X 1 " X 1"
100
430020
430030
430040
430050
430060
430070
10" X 1 1/2" X 1"
100
N/A
N/A
10" X 1 1/2" X 1"
220
12" X 1 1/2" X 1"
220
430090
430100
$91.00
$150.00
12" X 1 1/2" X 1 1/4"
220
N/A
N/A
WHEEL DIAMETER X
THICKNESS X ARBOR
HOLE
DIAMOND GRINDING WHEELS
These DIAMOND GRINDING WHEELS,
also known as plated rim diamond
wheels, are made by nickel plating/
bonding a layer of diamonds to the
perimeters of the wheel. The diamonds
are securely held into place.
The MLS LANCER wheels are
constructed of solid metal cores. These
wheels actually sing to you while you are
grinding.
The Diamond Pacific GALAXY wheels
are made with tough nylon cores, banded
with solid steel rings, balanced and
machined to close tolerances which
provide fast accurate grinding.
MLS PART
NUMBER
4" X 1 1/4" X 1"
80
4" X 1 1/4" X 1"
100
4" X 1 1/4" X 1"
220
6" X 1 1/2" X 1"
60
6" X 1 1/2" X 1"
80
6" X 1 1/2" X 1"
100
6" X 1 1/2 " X 1"
180
6" X 1 1/2" X 1"
220
6" X 1 1/2" X 1"
360
6" X 1 1/2" X 1"
600
8" X 1 1/2" X 1"
60
8" X 1 1/2" X 1"
80
8" X 1 1/2 " X 1"
100
8" X 1 1/2" X 1"
180
8" X 1 1/2" X 1"
220
8" X 1 1/2" X 1"
360
8" X 1 1/2" X 1"
600
All silicon carbide grinding wheels form
grooves even with normal use. The TBar Diamond Dresser is essential for
restoring a flat working surface and a true
smooth running balanced wheel.
DRESSER COMPLETE
MLS PART#: 510030
PRICE: $30.00
REPLACEMENT HEAD
MLS PART#: 510040
PRICE: $24.00
MLS LANCER
DIAMOND WHEELS
DIAMOND PACIFIC
GALAXY DIAMOND
WHEELS
MLS PART No.
Price
MLS PART No.
Price
500010
500020
500030
500040
500050
500060
500070
500080
500090
500100
500110
500120
500130
500140
500150
500160
500170
$100.00
$100.00
$100.00
$150.00
$140.00
$130.00
$126.00
$126.00
$120.00
$110.00
$200.00
$184.00
$170.00
$166.00
$166.00
$160.00
$150.00
501010
501020
501030
501040
501050
501060
501070
501080
501090
501100
501110
501120
501130
501140
501150
501160
501170
$150.00
$140.00
$110.00
$215.00
$200.00
$185.00
$155.00
$140.00
$140.00
$140.00
$280.00
$260.00
$240.00
$200.00
$180.00
$180.00
$180.00
PRICE
070010
TELESCOPIC BUSHINGS, Reduce
from 1" diameter hole 3/4", 5/8" or 1/2",
15/16" wide
$2.00
070020
11/16" wide
$1.80
070030
1/2" wide
$1.70
N/A - Not Available
Diamond
Mesh
Size
T-BAR DIAMOND DRESSER
Remember
ROCKS ARE GOOD!!!!!
32
GRINDING WHEELS
“YOUR LAPIDARY
GENERAL STORE”
WHEEL DIAMETER X
THICKNESS X ARBOR
HOLE
Diamond
Mesh
Size
MLS
REENTEL RESIN
DIAMOND WHEELS
MLS PART No.
Price
MLS PART No.
Price
N/A
N/A
N/A
N/A
N/A
N/A
N/A
$70.00
$70.00
$70.00
$70.00
$70.00
$70.00
N/A
N/A
N/A
N/A
N/A
N/A
N/A
503080
503090
503100
503110
503120
503130
503140
503150
503160
503170
503180
503190
503200
503210
N/A
N/A
N/A
N/A
N/A
N/A
N/A
$110.25
$110.25
$110.25
$110.25
$110.25
$110.25
$110.25
$154.35
$154.35
$154.35
$154.35
$154.35
$154.35
$154.35
504010
504020
504030
504040
504050
504060
504070
504080
504090
504100
504110
504120
504130
504140
504150
504160
504170
504180
504190
504200
504210
$87.00
$87.00
$87.00
$87.00
$87.00
$87.00
$87.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$215.00
$215.00
$215.00
$215.00
$215.00
$215.00
$215.00
8,000
14,000
6" X 1 1/2" X 1"
50,000
N/A
N/A
8" X 2" X 1"
280
8" X 2" X 1"
600
8" X 2" X 1"
1,200
8" X 2" X 1"
3,000
8" X 2" X 1"
8,000
8" X 2" X 1"
14,000
505150
505160
505170
505180
505190
505200
$100.00
$100.00
$100.00
$100.00
$100.00
$100.00
8" X 2" X 1"
50,000
N/A
N/A
600
4" X 1 1/4" X 1"
1,200
4" X 1 1/4" X 1"
3,000
4" X 1 1/4" X 1"
8,000
4" X 1 1/4" X 1"
14,000
4" X 1 1/4" X 1"
50,000
6" X 1 1/2" X 1"
280
6" X 1 1/2" X 1"
600
6" X 1 1/2" X 1"
1,200
6" X 1 1/2" X 1"
3,000
N/A - Not Available
SINTERED RIM DIAMOND WHEELS
WHEEL DIAMETER X
THICKNESS X ARBOR
HOLE
DIAMOND SANDING / POLISH WHEELS
These DIAMOND SANDING /
POLISHING WHEELS, also
known as diamond soft wheels,
are made by bonding a layer of
diamonds and resin to the
perimeters of a foam backed
wheel on a nylon core. The
diamonds are securely held in
place for many hours of sanding
and polishing.
The
Reentel
RESIN
DIAMOND WHEELS
are
constructed of nylon cores. An
economical priced diamond flex
wheel
for
the
occasional
lapidarist. These wheels need to
be broken in! Made in the U.S.A.
These are the identical wheels
used on the Cabking.
DIAMOND PACIFIC
NOVA DIAMOND
WHEELS
Price
6" X 1 1/2" X 1"
4" X 1 1/4" X 1"
EASTWIND FLEX
DIAMOND WHEELS
MLS PART No.
6" X 1 1/2" X 1"
280
N/A
N/A
N/A
N/A
N/A
N/A
N/A
505080
505090
505100
505110
505120
505130
4" X 1 1/4" X 1"
The
EASTWIND
FLEX
WHEELS are constructed of
nylon cores and use an unique
resin system to bond the
diamonds to the wheel. These
wheels
produce
a
less
aggressive sanding action than
some flex wheels on the market.
A favorite with OPAL cutters.
These wheels need to be broken
in! Made in the U.S.A.
The Diamond Pacific NOVA
wheels are the “GOLD” standard
of flex wheels in the industry.
They are the longest lasting flex
wheel made.
These wheels
need break-in.
Made in the
U.S.A. These are the identical
wheels used on the Pixie, Genie
and Titan.
* - Special Order Item
33
Diamond
Mesh Size
MLS PART
No.
Price
4" X 1 1/2" X 1"
30
4" X 1 1/2" X 1"
60/80
4" X 1 1/2" X 1"
100/120
4" X 1 1/2" X 1"
220
6" X 1 1/2" X 1"
30
502000*
502010*
502020*
502030*
502100*
502110*
502120*
502130*
502200*
502210*
502220*
502230*
$276.80
$249.60
$249.60
$249.60
$366.00
$326.00
$326.00
$326.00
$450.00
$400.00
$400.00
$400.00
6" X 1 1/2" X 1"
60/80
6" X 1 1/2" X 1"
100/120
6" X 1 1/2" X 1"
220
8" X 1 1/2" X 1"
30
8" X 1 1/2" X 1"
60/80
8" X 1 1/2" X 1"
100/120
8" X 1 1/2" X 1"
220
SINTERED DIAMOND WHEEL
The BEST Diamond Grinding Wheel on the
MARKET!!! Constructed of a solid metal core with a
3.5 mm layer of DIAMOND/METAL Matrix around the
perimeter of the wheel. With proper care this wheel
will cut as fast for its’ entire life as when it is fresh out
of the box. This style wheel has a MUCH extended
life (better than 20 times) of a rim plated wheel.
SANDING / POLISHING BELTS
“YOUR LAPIDARY
GENERAL STORE”
MLS
SILICON CARBIDE BELTS
36 Mesh
BELT SIZE
WIDTH X
CIRCUMFERENCE
APPLICATION
2 1/2" X 18 15/16"
6" X 2 ½" Scott- Murray or Lortone EX Drums
3" X 24"
Covington Belt Sander & Other Misc. Sanders
3" X 25 7/32"
8" X 3" Scott-Murray Expandable Drums
3" X 25 1/8"
8" X 3" Lortone Exact-Span Rubber Drums
3" X 41 1/2"
Highland Park Belt Sander
60 Mesh
80 Mesh
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
$2.95
332030
333030
334030
335030
336030
337030
$2.60
4" X 37 15/16"
332020
333020
334020
335020
336020
337020
$2.75
12" X 4" Bull wheel
332010
333010
334010
335010
336010
337010
BELT SIZE
WIDTH X
CIRCUMFERENCE
APPLICATION
Price
3" X 25 1/8"
8" X 3" Lortone Exact-Span Rubber Drums
3" X 41 1/2"
Highland Park Belt Sander
4" X 37 15/16"
12" X 4" Bull wheel
3" X 30"
Gryphon Wet Belt Sander
MLS SILICON CARBIDE
SANDING CLOTH ROLLS
3" Wide X 25' Long
3" Wide X 50' Long
3" Wide X 150' Long
800 Mesh
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
$1.90
$2.45
$2.65
$3.25
$3.25
$5.90
$7.50
$6.10
331040
332040
331050
332050
331060
332060
331070
332070
333070
334070
335070
336070
337070
340070
331080
332080
333080
334080
335080
336080
337080
331090
332090
100 Mesh
220 Mesh
320 Mesh
400 Mesh
600 Mesh
800 Mesh
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
321010
322010
323010
321020
322020
323020
321030
322030
323030
321040
322040
323040
321050
322050
323050
321060
322060
323060
Call
Call
Call
334040
335040
336040
337040
340040
334050
335050
336050
337050
340050
334060
335060
336060
337060
Call
Call
Call
334090
Call
Call
337090
340090
Price
$27.30
$54.60
$161.70
NEW
HI-TECH DIAMOND BELTS
1 1/2" Wide X 18 15/16"
Circumference
2 1/2" Wide X 18 15/16"
Circumference
6" X 1/2" Expandable or Lortone EX
Drums
6" X 2 1/2" Expandable Lortone EX
Drums
MLS PART No.
Price
MLS PART No.
370010
370020
370030
370040
370050
$30.00
$30.00
$30.00
$30.00
$30.00
370110
370120
370130
370140
370150
Price
$40.00
$40.00
$40.00
$40.00
$40.00
34
NEW
DIAMOND FLEX WHEEL /
DIAMOND BELT BREAK IN STICK
THIS PRODUCT AVAILABLE MID TO LATE 2014
220
325
600
1,200
3,000
$8.00
600 Mesh
Diamond belts last many times longer than silicon carbide belts. (Sometimes
up to 50 or more times longer.) There is also much less mess with diamond
belts. Diamond belts also cut much faster than silicon carbide belts. Also
please note that the finish is different on the 2 different type belts. As a rule
of thumb a 600 Mesh Silicon Carbide belt produces the same finish
as a 1,800 Mesh Diamond Belt.
DIAMOND
MESH SIZE
Call
400 Mesh
8" X 3" Scott-Murray Expandable Drums
$3.40
$3.40
320 Mesh
Covington Belt Sander & Other Misc. Sanders
Call
$3.65
$3.65
$6.50
$8.50
Call
220 Mesh
1 1/2" X 18 15/16"
3" X 24"
$4.00
$4.00
$6.85
Call
100 Mesh
2 1/2" X 18 15/16"
3" X 25 7/32"
Call
3" Wide X 25 7/32"
Circumference
8" X 3" Expandable Drum
MLS PART No.
Price
370210
370220
370230
370240
370250
$66.00
$66.00
$66.00
$66.00
$66.00
Flexible resin bonded diamond
wheels and diamond belts need
broken in to operate correctly.
Basically you need to burn the resin
off of the diamond faces.
This
special pure aluminum oxide stick is
made just for that application.
To use, just pass over the face of the
wheel/belt for 20 to 30 seconds.
USE LOTS OF WATER!!!
BREAK-IN STICK
MLS PART#: 622010
PRICE: $7.00
SANDING / POLISHING BELTS
“YOUR LAPIDARY
GENERAL STORE”
MLS
EASTWIND DIAMOND BELTS
DIAMOND
MESH SIZE
60
120
220
325
400
600
1,200
1,800
3,000
8,000
14,000
50,000
100,000
1 1/2" Wide X 18 15/16"
Circumference
2 1/2" Wide X 18 15/16"
Circumference
3" Wide X 25 7/32"
Circumference
6" X 1/2" Scott-Murray Expandable or
Lortone EX Drums
6" X 2 1/2" Scott-Murray Expandable
Lortone EX Drums
8" X 3" Scott-Murray
Expandable Drum
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
301010
301020
301030
301040
301050
301060
301070
301080
301090
301100
301110
301120
301130
$45.00
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
$40.90
302010
302020
302030
302040
302050
302060
302070
302080
302090
302100
302110
302120
302130
$64.30
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
$58.45
304010
304020
304030
304040
304050
304060
304070
304080
304090
304100
304110
304120
304130
$96.40
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
$87.65
EASTWIND Diamond Belts
are a favorite with Opal
cutters. They provide a “less”
aggressive action that a Nova
wheel. They will provide a
superior polish for this class of
resin
bonded
diamond
abrasive.
WE LIKE
ROCKS,
ROCKS ARE
GOOD!!!
NEW
POLISHING BELTS
MLS PART
NUMBER
310010
310020
310030
315010
315020
315030
PARTS DESCRIPTION
UNCHARGED CANVAS BELTS For
use on Expandable Drum, Belts are
1 1/2" X 18 15/16" Belts (1 1/2" X 6"
Drums)
2 1/2" X 18 15/16" Belts (2 1/2" X 6"
Drums)
3" X 25 7/32" Belts (3" X 8" ScottMurray type drums)
UNCHARGED CORK BELTS For use
on Expandable Drum, Belts are
1 1/2" X 18 15/16" Belts (1 1/2" X 6"
Drums)
2 1/2" X 18 15/16" Belts (2 1/2" X 6"
Drums)
3" X 25 7/32" Belts (3" X 8" ScottMurray type drums)
POLISHING BELTS
MLS PART
NUMBER
PRICE
$2.00
380020
$3.00
380030
$5.00
PRICE
341005
6" X 1 1/2" Wide SCOTT-MURRAY or
Equal Expandable Drum, Uses 1 ½" X
18 15/16" Belts. Fits 1" to ½" Arbor Size
$56.00
341020
$7.35
380010
RESIN BONDED CERIUM OXIDE
POLISH BELT For use on Expandable
Drum, Belts are 1 1/2" X 18 15/16" Belts
(1 1/2" X 6" Drums)
$35.00
$60.00
PARTS DESCRIPTION
$5.80
$12.00
$50.00
MLS PART
NUMBER
341010
on Gryphon Wet Belt Sander, 3" X 30"
Drum, Belts are 2 1/2" X 18 15/16" Belts
(2 1/2" X 6" Drums)
Drum, Belts are 3" X 25 7/32" Belts (3" X
8" Drums)
PRICE
POLISHING DRUMS
$4.00
315040
PARTS DESCRIPTION
35
6" X 2 1/2" Wide SCOTT-MURRAY or
Equal Expandable Drum, Uses 2 ½" X
18 15/16" Belts. Fits 1" to ½" Arbor Size
6" X 2 1/2" Wide, Lortone, EX 625
EXACT FIT Drum, Uses 2 ½" X
18 15/16" Belts. Fits 1/2" Arbor Size
$64.00
$29.00
341030
$29.00
341040
$29.00
341050
18 15/16" Belts. Fits 1" Arbor Size
$29.00
POLISHING DRUMS & BELTS / DISCS
“YOUR LAPIDARY
GENERAL STORE”
MLS
EXPANDABLE DRUMS expand by rotation to
hold sanding belts in place. Belts can be
easily changed when stopped. These drums
are made from carefully formulated rubber and
are flexible enough to bend to the stone.
Maximum RPM is 1750. RUN ONLY WITH
THE BELT ON!!!
Polishing buffs are supplied with a soft reinforced leather center or
hardened shellac center for use with a spiral spindle arbor shaft end.
The MUSLIN buff is used for fast cutdown of material.
The COTTON FLANNEL buff is used for final polish.
These buffs are normally used to polish metal,
However with the right polish compound such as
bar Tripoli, Fabuluster or Zam, they can be used
to polish soft rocks.
This is the best type of drum on the market,
it’s what I use!!!
NEW
POLISHING BUFFS
EX DRUMS are lightweight, two piece
sanding drums with resilient foam rubber
center ring. Split the drum and remove the
ring to change the belts.
MLS PART
NUMBER
POLISHING DRUMS
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
341060
8" X 3" Wide SCOTT-MURRAY or
Equal Expandable Drum, Uses 3" X 25
7/32" Belts. Fits 1" to ½" Arbor Size
341070
8" X 3" Wide, Lortone, EX 83 EXACT
FIT Drum, Uses 3" X 25 1/8" Belts. Fits
½" Arbor Size
$39.50
341080
5/8" Arbor Size
$39.50
341090
3/4" Arbor Size
$39.50
341100
1" Arbor Size
$39.50
341110
Replacement foam rubber band for
Lortone EX 625 (6" dia.) Drum
341120
Replacement foam rubber band for
Lortone EX 83 (8" dia.) Drum
PARTS DESCRIPTION
PRICE
360010
3" Dia. MUSLIN BUFF, 35 Ply, 3 Rows
Stitching
$1.80
360020
3" Dia. COTTON FLANNEL BUFF, 30
Ply, 3 Rows Stitching
$2.80
360310
6" Dia. MUSLIN BUFF, 50 Ply, 4 Rows
Stitching
$2.80
360320
6" Dia. COTTON FLANNEL BUFF, 30
Ply, 4 Rows Stitching
$5.75
$76.00
SOLID FELT WHEELS - Now in those hard to find larger sizes and all
three hardnesses. Buffs are made of high grade wool felt compressed
for uniform texture and hardness. For polishing and lapping metal and
stones. Can be charged with polishing compounds. Wheels are bored
to 1" and may be bushed to fit 3/4", 5/8" and 1/2" arbors.
SOLID FELT WHEELS
WHEEL
SIZE
$6.25
$7.25
WHEEL
HARDNESS
MLS PART
NUMBER
Price
6" X 1 ½"
Hard
6" X 1 ½"
Medium
6" X 1 ½"
Soft
351010
351020
351030
351040
351050
351060
$71.90
$61.95
$55.30
$127.80
$110.10
$98.25
8" X 1 ½"
Hard
8" X 1 ½"
Medium
8" X 1 ½"
Soft
DISCS
SILICON CARBIDE DISCS (NON-PSA)
36 Mesh
DISC
DIA.
MLS Part #
6"
8"
10"
12"
420110
420210
420310
420410
60 Mesh
Price
$1.50
$2.85
$4.60
$8.90
100 Mesh
220 Mesh
320 Mesh
400 Mesh
600 Mesh
800 Mesh
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
MLS Part #
420120
420220
420320
420420
420130
420230
420330
420430
420140
420240
420340
420440
420150
420250
420350
420450
420160
420260
420360
420460
420170
420270
420370
420470
Price
MLS Part #
420115
420215
420315
420415
$1.40
$2.60
$4.25
$8.10
Price
$1.30
$2.35
$3.90
$7.25
M.L.S. STOCKS A WIDE VARIETY OF SILICON CARBIDE AND DIAMOND DISC ABRASIVE
PRODUCTS. CUSTOM ABRASIVE DISCS IN ALMOST ANY SIZE OR SPECIFICATION CAN
BE ORDERED UPON REQUEST.
36
DISCS
“YOUR LAPIDARY
GENERAL STORE”
MLS
LEATHER / FELT / FOAM RUBBER DISCS
COWHIDE
DESCRIPTION
ELK HIDE
FELT PAD (NON-PSA)
RUBBER PAD (NON-PSA)
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
410010
410020
410030
$6.00
$9.00
$16.00
411010
411020
411030
$8.00
$13.50
$22.00
412010
412020
N/A
$4.40
$6.95
N/A
413010
413020
N/A
$2.95
$3.95
N/A
6" DIA. NO HOLE
8" DIA. NO HOLE
10" DIA. NO HOLE
HARD DIAMOND DISCS
THIN DISC
MLS LANCER THIN DISCS are an economically priced imported diamond disc
featuring a thin, facet/cabochon discs with ½" arbor hole, at a highly competitive
prices. Must be used with a master lap on facet machines.
Master Lap
LANCER THIN DISCS
DIAMOND MESH SIZE
80
100
180
260
360
600
1200
3000
DIAMOND GRINDING DISCS are precision diamond discs bonded to a plastic
backing plate. These discs offer a flat parallel grinding surface face for faceting,
inlay, general lapidary and glass grinding applications. Also great for carbide
and high speed steel tool grinding and shaping. Discs come with a ½" arbor
hole.
6" Dia. LANCER THIN
DISC
8" Dia. LANCER THIN
DISC
6" Dia. GRINDING DISC
WITH BACKER PLATE
DIAMOND GRINDING DISC
with BACKING PLATE
8" Dia. GRINDING DISC
WITH BACKER PLATE
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
400010
400020
400030
400040
400050
400060
400070
400080
$46.00
$38.00
$34.00
$28.00
$28.00
$22.00
$20.00
$50.00
401010
401020
401030
401040
401050
401060
401070
401080
$56.00
$48.00
$44.00
$36.00
$36.00
$32.00
$30.00
$60.00
402010
402020
402030
402040
N/A
402060
402070
N/A
$79.00
$79.00
$79.00
$59.00
N/A
$59.00
$59.00
N/A
403010
403020
403030
403040
N/A
403060
403070
N/A
$99.00
$99.00
$99.00
$69.00
N/A
$69.00
$69.00
N/A
SPECIALTY DISCS
ITEM DESCRIPTION
6" DIAMETER
8" DIAMETER
MLS PART No.
Price
MLS PART No.
Price
PLASTIC BACKING
PLATE FOR
AMERITOOL FLAT
LAPS (½" ARBOR)
414010
$20.00
414020
$25.00
PLASTIC BACKING
PLATE FOR HI-TECH
FLAT LAPS (½" ARBOR)
417010
$20.50
417020
$25.50
SPONGE DISC
(PSA) Backed
415010
$6.00
415020
$8.00
WHITE POLISH DISC
(PSA) Backed
416010
$12.00
416020
$16.00
RESIN BONDED
CERIUM OXIDE POLISH
DISC, (PSA) Backed
418010
$18.00
418020
$22.00
BACKING PLATE - A precision laser cut Lucite backing
plate used to back up thin polish discs, diamond Toppers
Sanding discs and silicon carbide discs. Manufactured to
exact precisions, flat and parallel within .001". Arbor hole
I/2" diameter.
SPONGE PAD - 1/8" thick sponge pad with pressuresensitive adhesive (PSA) backing. Use under diamond
sanding disc, felt pads or white polish pads to cushion
and help remove flat spots from cabochons. NO HOLE!
WHITE POLISH PAD - A polish pad used by cutters who
want to charge their polish disc with diamond compounds
or oxide polishes to achieve a mirror polish on their
gemstones or glass. These pressure-sensitive adhesive
(PSA) backed pads are a great substitutes for leather
and felt discs. NO HOLE.
CERIUM OXIDE PAD – Put a mirror polish on stone or
glass. Pre-charged pad, use with water, (PSA) backing.
NO HOLE.
NOTE: The ROTARY FLAT LAP in its various incarnations has turned into my handiest lapidary
tool. I not only cut “cabs” on it, I also do a lot of face polishing. What I use my wheeled arbor for is
to “HOG” off large quantities of rock to shape my stone. I then use my DIAMOND FLAT LAP to do
the delicate finish work including finish grinding, sanding and polishing.
37
DISCS
“YOUR LAPIDARY
GENERAL STORE”
MLS
DIAMOND SANDING / POLISH DISCS
MLS PART
NUMBER
PARTS DESCRIPTION
442010
1" Dia. MINI SANDING
DISC SET, each set
contains 4 - 1" rubber
mandrels with 1/8" shafts, 3
each of the 325, 600, 1,200
Mesh Diamond Sanding
discs and 3 White Polish
Pads. A 1 gram tube of
14,000 Mesh Diamond
Compound is also included.
DIAMOND
MESH SIZE
100 (Black)
220 (Purple)
325 (Brown)
600 (Red)
1,200 (Blue)
3,000 (Orange)
8,000 (Yellow)
6" DIAMETER NO
HOLE DISC (PSA)
MLS PART
No.
440010
440020
440030
440040
440050
440060
440070
MINI SANDING DISC REFILL
PRICE
1" DIAMETER NO
HOLE DISC (PSA)
DIAMOND
MESH SIZE
MLS PART
No.
Price
8,000 (yellow)
443020
443030
443040
443050
443060
443070
$5.25
$5.25
$5.25
$5.25
$5.25
$5.25
WHITE Polish
Disc
444010
$3.25
1" Rubber
Mandrel
445010
$4.00
220 (Purple)
$27.00
325 (Brown)
600 (Red)
1,200 (Blue)
3,000 (Orange)
8" DIAMETER NO
HOLE DISC (PSA)
Price
MLS PART
No.
Price
$29.00
$29.00
$29.00
$29.00
$29.00
$29.00
$29.00
441010
441020
441030
441040
441050
441060
441070
$39.00
$39.00
$39.00
$39.00
$39.00
$39.00
$39.00
FACET DISCS - These discs are made from a steel or
metal alloy backing plate precision machined and
balances. On the steel backing plate diamonds are
electro plated directly to the plate. On the alloy backing
plate the nickel bonded diamond topper plate is applied
using a hydraulic press. Discs come with standard ½"
diameter arbor hole. Discs with a + are steel
backed discs; with a ^ are alloy backed.
NuBond Laps - Multilayer NuBond laps have a higher
concentration of friable, self sharpening diamonds
bonded directly to a solid aluminum backer, NuBond
laps are precise and true running, lightweight and
corrosion resistant. ½" Arbor hole.
UNCHARGED LAPS - All uncharged lapping discs
are precision machined for good balance and
minimal vibration. They come in several type of
materials to be charged by the craftsman with his or
her personal preference of diamond or other
abrasives. All uncharged lapping discs come with
½" diameter arbor hole.
NuBond DIAMOND
SANDING/PREPOLISH LAPS
(EACH SANDING
DISC SET
CONTAINS 3
DISCS)
DIAMOND SANDING / POLISH DISCS - These discs are made of a unique
blend of diamond powders mixed with resins which is applied to a tough
synthetic pressure sensitive adhesive (PSA) backing pad. Each mesh size
diamond is a different color allowing easy identification of diamond size.
The color is also an easy way to determine the condition of the pad. AS
LONG AS YOU HAVE COLOR, YOU HAVE DIAMONDS!!! These
discs provide a superior polish. THEY ARE WHAT I USE!!! These discs
MUST be run WET!!!!
FACETING DISCS - HARD
DIAMOND MESH SIZE
80^
100+
180^
260+
360^
600+
1,200+
1,800^
3,000+
8,000^
DIAMOND
MESH SIZE
MLS
PART No.
Price
6"
6"
6"
8"
8"
8"
325
600
1,200
325
600
1,200
452010
452020
452030
452110
452120
452130
$120.00
$120.00
$120.00
$150.00
$150.00
$150.00
8" DIAMETER DISC
½" ARBOR HOLE
MLS PART No.
Price
MLS PART No.
Price
450010
450020
450030
450040
450050
450060
450070
450080
450090
450100
$155.00
$68.00
$106.00
$58.00
$91.00
$52.00
$52.00
$91.00
$66.00
105.00
451010
451020
451030
451040
451050
451060
451070
451080
451090
451100
$225.00
$86.00
$133.00
$80.00
$110.00
$70.00
$70.00
$110.00
$84.00
$140.00
UNCHARGED LAPS
MATERIAL TYPE
BATT LAP
DISC
DIAMETER
6" DIAMETER DISC
½" ARBOR HOLE
CERAMIC
COPPER LAP
DARKSIDE LAP
LUCITE LAP
MASTER
PHENOLIC
TIN
38
6" DIAMETER DISC
½" ARBOR HOLE
8" DIAMETER DISC
½" ARBOR HOLE
MLS PART No.
Price
MLS PART No.
Price
466010
464010
460010
467010
461010
465010
462010
463010
$98.00
$170.00
$60.00
$75.00
$23.30
$24.00
$51.00
$130.00
466020
464020
460020
467020
461020
465020
462020
463020
$130.00
$230.00
$76.00
$94.00
$30.00
$30.00
$68.00
$175.00
DISCS / POLISHING HEADS
“YOUR LAPIDARY
GENERAL STORE”
MLS
ULTRA LAPS - No polishing mess! Each lap has a uniform layer of
polishing compound on a thin polyester film. For only a few cents per stone,
eliminate scratching while faceting or cabbing. For use with water. Fast,
clean and reusable. ½" arbor hole.
NOTE - Spectra Cerium Oxide discs are 99% pure cerium oxide and offer
faster polishing than regular cerium oxide Ultra Laps.
ULTRA LAPS
6" DIAMETER DISC
½" ARBOR HOLE
MATERIAL TYPE
ALUMINUM OXIDE, 0.3 micron
CERIUM OXIDE, 1.5 micron
CHROME OXIDE, 0.5 micron
DIAMOND, 1.0 micron
NEW
DIAMOND, 0.5 micron
DIAMOND, 0.10 micron
SPECTRA CERIUM, 1.5 micron
TIN OXIDE, 1.2 micron
MLS PART No.
Price
MLS PART No.
Price
470010
471010
472010
475010
475012
475014
473010
474010
$8.90
$8.85
$5.80
$13.00
$13.00
$13.00
$13.60
$8.90
470020
471020
472020
475020
475022
475024
473020
474020
$11.30
$13.10
$8.50
$22.80
$22.80
$22.80
$17.30
$11.30
POLISHING HEADS (DISCS)
DISC
SIZE
THREAD
TYPE
DISC TYPE
4"
¼"-20 R.H. Stud
Plastic Spin-On
6"
¼"-20 R.H. Stud
Plastic Spin-On
6"
¼"-20 R.H. Stud
Plastic Spin-On
6"
¼"-20 R.H. Stud
Plastic Spin-On
DISC FACE
TYPE
6"
¼"-20 R.H. Stud
Plastic Spin-On
Sponge &
Untreated Canvas
Pad
Sponge &
Untreated Canvas
Pad
Sponge &
Rough Leather
Pad
Sponge &
Smooth Leather
Pad
Sponge Pad
6"
¼"-20 R.H. Stud
Plastic Spin-On
Sponge & Felt Pad
6"
¼"-20 L.H. Stud
Plastic Spin-On
Sponge Pad
6"
¼"-20 L.H. Stud
Plastic Spin-On
Sponge & Felt Pad
6"
½"-20, R.H., FM
Cast Aluminum
Sponge Pad
6"
½"-20, L.H., FM
Cast Aluminum
Sponge Pad
6"
½" Smooth Bore
Cast Aluminum
Sponge Pad
6"
5/8"-18, R.H., FM
Cast Aluminum
Sponge Pad
6"
5/8"-18, L.H., FM
Cast Aluminum
Sponge Pad
6"
5/8" Smooth Bore
Cast Aluminum
Sponge Pad
6"
¾"-16, R.H., FM
Cast Aluminum
Sponge Pad
6"
¾"-16, L.H., FM
Cast Aluminum
Sponge Pad
6"
3/4" Smooth Bore
Cast Aluminum
Sponge Pad
8"
½"-20, R.H., FM
Cast Aluminum
Sponge Pad
8"
½"-20, L.H., FM
Cast Aluminum
Sponge Pad
8"
½" Smooth Bore
Cast Aluminum
Sponge Pad
8"
5/8"-18, R.H., FM
Cast Aluminum
Sponge Pad
8"
5/8"-18, L.H., FM
Cast Aluminum
Sponge Pad
8"
5/8" Smooth Bore
Cast Aluminum
Sponge Pad
8"
¾"-16, R.H., FM
Cast Aluminum
Sponge Pad
8"
¾"-16, L.H., FM
Cast Aluminum
Sponge Pad
8"
3/4" Smooth Bore
Cast Aluminum
Sponge Pad
8" DIAMETER DISC
½" ARBOR HOLE
LAPCRAFT
POLISHING PADS
MLS PART
No.
Price
490010
$8.50
490020
$12.00
MICRO-TEX - Not as dense or durable as Dura-Tex, but more
versatile. For use with 260 thru 3,000 mesh
diamond compounds.
496010
$15.95
POLY-TEX - Get mirror finishes with this pad. A blend of both
natural and synthetic fibers. Recommended for
3,000 thru 50,000 mesh diamond compounds.
496020
$15.95
491020
492020
491030
492030
494010
494020
494030
494040
494050
494060
494070
494080
494090
495010
495020
495030
495040
495050
495060
495070
495080
495090
39
$18.50
$21.50
$18.50
$21.50
$58.50
$58.50
$58.50
$58.50
$58.50
$58.50
$58.50
$58.50
$58.50
$73.50
$73.50
$73.50
$73.50
$73.50
$73.50
$73.50
$73.50
$73.50
DURA-TEX - Specially treated for use with 180 thru 1,800 mesh
diamond compound.
MATERIAL
TYPE
DURA-TEX
MICRO-TEX
POLY-TEX
MATERIAL
TYPE
DURA-TEX
MICRO-TEX
POLY-TEX
MATERIAL
TYPE
DURA-TEX
MICRO-TEX
POLY-TEX
4" DIAMETER DISC
NO HOLE (PSA)
MLS PART No.
Price
480010
481010
482010
$5.75
$4.00
$5.00
6" DIAMETER DISC
NO HOLE (PSA)
MLS PART No.
Price
480020
481020
482020
$8.75
$6.50
$8.00
8" DIAMETER DISC
NO HOLE (PSA)
MLS PART No.
Price
480030
481030
482030
$15.00
$10.00
$13.00
There’s nothing like
working ROCKS in a
warm shop on a “COLD”
Minnesota night!!!!
POLISHING HEADS / DIAMOND DRILL BITS
“YOUR LAPIDARY
GENERAL STORE”
MLS
UNIVERSAL / INTERCHANGEABLE FACEPLATE
A new product for M.L.S. A complete POLISHING HEAD (Disc) for mounting on an arbor shaft requires the
appropriate sized FACEPLATE and correct sized/threaded HUB. The faceplates are made from ¼” thick aluminum
machined on both sides. Hubs are machined from aluminum bar stock designed to be bolted to the faceplate with 3
hex headed cap screws.
HUB ADAPTER
NEW
DISCS & HUBS
ITEM
MLS PART No.
Price
6" FACEPLATE
497100
497200
497010
497012
497014
497020
497022
497024
$29.00
$36.50
$14.70
$14.70
$14.70
$14.70
$14.70
$14.70
8" FACEPLATE
1/2” S.B. HUB
1/2” - 20 R.H. HUB
1/2” - 20 L.H. HUB
5/8” S.B. HUB
5/8” - 18 R.H. HUB
5/8” - 18 L.H. HUB
FACEPLATE
ITEM
MLS PART No.
Price
3/4” S.B. HUB
497030
497032
497034
497040
497042
497044
$14.70
$14.70
$14.70
$14.70
$14.70
$14.70
3/4” - 16 R.H. HUB
3/4” - 16 L.H. HUB
1” S.B. HUB
1” - 12 R.H. HUB
1” - 12 L.H. HUB
NOTE: S.B. = Smooth Bore
L.H. = Left Hand Fine Thread
R.H. = Right Hand Fine Thread
COMPLETE POLISHING HEAD (Disc)
DIAMOND DRILL BITS
I have done extensive testing. For holes under 3 mm., the MICRO
CORE DRILL BIT work best followed by the SOLID DRILL BITS.
SOLID DRILL BITS - are made from sharp manmade
diamonds bonded (nickel plated) to a solid tempered
steel core.
My test coupons were ¼" thick Brazilian Agates using a 1 mm drill bit at
1,000 RPM and using MLS “DIAMOND LUBE”. The hollow bits gave
me about 25 holes while the solid bits gave me 7 holes.
SOLID DRILL BITS (Plated Diamond)
BIT
DIAMETER
0.75 mm
1.00 mm
1.25 mm
1.50 mm
1.75 mm
2.00 mm
2.25 mm
2.50 mm
3.00 mm
3.50 mm
4.00 mm
SINGLE BITS
6 PACK OF BITS
MLS PART No.
Price
MLS PART No.
Price
555011
555021
555031
555041
555051
555061
555071
555081
555091
555101
555111
$2.00
$2.00
$2.00
$2.00
$2.00
$2.00
$4.50
$2.00
$5.50
$6.00
$6.50
555016
555026
555036
555046
555056
555066
555076
555086
555096
555106
555116
$10.80
$10.80
$10.80
$10.80
$10.80
$10.80
$23.00
$10.80
$28.00
$30.00
$35.00
MLS PART
NUMBER
PARTS DESCRIPTION
555120
ASSORTED SIX PACK of SOLID
DIAMOND DRILL BITS - 1 each of ¾, 1,
1 ¼, 1 ½, 2 and 2 ½ mm bits
555130
ASSORTED ELEVEN PACK of SOLID
DIAMOND DRILL BITS - 1 each of ¾, 1,
1 ¼, 1 ½, 1 ¾, 2, 2 ¼ 2 ½, 3, 3 ½ and 4
mm bits
At 2,500 RPM I got half as many holes, at 5,000 RPM I got 5 holes on
the hollow core and ZERO holes on the solid bit.
MICRO CORE DRILL BITS
(Plated Diamonds)
OUTER
DIAMETER
1.00 mm
1.25 mm
1.50 mm
1.75 mm
2.00 mm
2.50 mm
3.00 mm
PRICE
3.50 mm
$10.80
MLS PART
NUMBER
$32.85
551200
40
SINGLE BITS
6 PACK OF BITS
MLS PART No.
Price
MLS PART No.
Price
551011
551021
551031
551041
551051
551061
551071
551081
$4.00
$4.00
$4.00
$4.00
$4.00
$4.00
$4.00
$4.00
551016
551026
551036
551046
551056
551066
551076
551086
$21.60
$21.60
$21.60
$21.60
$21.60
$21.60
$21.60
$21.60
PARTS DESCRIPTION
ASSORTED SIX PACK of MICRO
HOLLOW CORE DIAMOND DRILL
BITS - 1 each of 1, 1 ½, 2, 2 ½, 3 and
3 1/2 mm bits
PRICE
$21.60
DIAMOND DRILLS
“YOUR LAPIDARY
GENERAL STORE”
MLS
DIAMOND DRILL BITS
SINTERED CORE DRILLS - just like sintered rim saw
blades have exposed diamond in a metal matrix around
the rim. This means that they last much longer than their
electroplated counter parts.
These core drills are
recommended for long life industrial use on marble and
granite.
CORE DRILL BITS (Sintered)
OUTER
DIAMETER
INNER
DIAMETER
0.50 Inch
0.37 Inch
0.75 Inch
0.62 Inch
1.00 Inch
0.86 Inch
1.25 Inch
1.10 Inch
1.50 Inch
1.35 Inch
2.00 Inch
1.80 Inch
These metal bonded hi-strength CORE DRILLS are
designed for fast cutting and long life. The rigid steel
shanks are plated and rust free. 60 mesh diamonds
used. Drill bits are measured by outside diameter.
These are AMERICAN made bits.
CORE DRILL BITS (Plated Diamond)
CORE
DIAMETER
SHANK
DIAMETER
1/4 Inch
5/32 Inch
5/16 Inch
5/32 Inch
SINGLE BITS
Price
MLS PART No.
560010
560020
560030
560040
560050
560060
$30.00
$36.00
$54.00
$60.00
$84.00
$102.00
3/8 Inch
1/4 Inch
7/16 Inch
1/4 Inch
1/2 Inch
1/4 Inch
9/16 Inch
1/4 Inch
5/8 Inch
3/8 Inch
11/16 Inch
3/8 Inch
3/4 Inch
3/8 Inch
13/16 Inch
3/8 Inch
7/8 Inch
3/8 Inch
1 Inch
3/8 Inch
1 1/16 Inch
3/8 Inch
ABOUT DRILLING HOLES IN ROCKS
One of the most
rocks. The best
DRILL”. These
$2,000.00!!! The
drill bit.
difficult lapidary skills I know of is drilling holes in
method uses something called an “ULTRA-SONIC
machines work great, however they cost about
next best bet is using a diamond plated or sintered
SINGLE BITS
MLS PART No.
Price
550010
550020
550030
550040
550050
550060
550070
550080*
550090
550100*
550110*
550120
550130*
$30.00
$31.00
$33.00
$35.00
$38.00
$40.00
$42.00
$46.00
$48.00
$52.00
$55.00
$60.00
$65.00
CRINKLE RIM BONDED DIAMOND CORE DRILLS can be used on both stone or glass. Used frequently for drilling holes for clock faces and wine
bottles for lamps. The crinkled edge quickly removes debris for more diamond cutting surface contact. Use on a drill press, ideally with a water swivel
adapter.
CORE DRILL
NEW
CORE DRILL BITS (Crinkled Rim Bonded Diamonds)
OUTSIDE
DIAMETER
(mm)
OUTSIDE
DIAMETER
(Inches)
4 mm
5/32 Inch
5 mm
13/64 Inch
6 mm
15/64 Inch
7 mm
1/4 Inch
8 mm
5/16 Inch
9 mm
23/64 Inch
10 mm
25/64 Inch
11 mm
7/16 Inch
12 mm
15/32 Inch
13 mm
1/2 Inch
14 mm
9/16 Inch
15 mm
19/32 Inch
16 mm
41/64 Inch
17 mm
43/64 Inch
18 mm
23/32 Inch
19 mm
3/4 Inch
MLS PART
No.
Price
540010
540020
540030
540040
540050
540060
540070
540080
540090
540100
540110
540120
540130*
540140*
540150*
540160
$4.00
$4.50
$6.00
$7.00
$8.00
$9.00
$10.00
$10.50
$11.00
$11.50
$12.00
$13.00
$14.00
$15.00
$16.00
$17.00
OUTSIDE
DIAMETER
(mm)
OUTSIDE
DIAMETER
(Inches)
20 mm
51/64 Inch
21 mm
53/64 Inch
22 mm
7/8 Inch
23 mm
29/32 Inch
24 mm
61/64 Inch
25 mm
1 Inch
26 mm
1 1/32 Inch
27 mm
1 3/32 Inch
28 mm
1 1/8 Inch
29 mm
1 5/32 Inch
30 mm
1 13/64 Inch
31 mm
1 1/4 Inch
32 mm
1 17/64 Inch
33 mm
1 19/64 Inch
34 mm
1 3/8 Inch
35 mm
1 13/32 Inch
41
MLS PART
No.
Price
540170*
540180*
540190
540200*
540210*
540220
540230
540240*
540250
540260*
540270*
540280
540290*
540300*
540310
540320*
$18.00
$18.50
$19.00
$19.50
$19.50
$20.00
$20.50
$21.00
$21.00
$21.50
$23.00
$24.00
$24.50
$25.00
$25.50
$26.00
RECOMMENDED
CORE DRILL
SPEEDS
UP TO ¼” O.D.
750 to 1,000
R.P.M.
¼” to ½” O.D.
650 to 850 R.P.M.
½” to ¾” O.D.
500 to 750 R.P.M.
¾” to 1" O.D.
400 to 650 R.P.M.
1" to 1 3/8” O.D.
250 to 500 R.P.M.
DIAMOND CARVING BITS & BURS
“YOUR LAPIDARY
GENERAL STORE”
MLS
GRYPHETTE
GRINDING HEADS
AVAILABLE
ECONOMY PLATED DIAMOND
CARVING TOOL SET
MLS PART
NUMBER
571010
571011
571012
571013
571014
571020
SLITTER SET
PARTS DESCRIPTION
ECONOMY
SMALL
PROFILE
DIAMOND (Plated) CARVING TOOL
SET Includes balls, cylinders, tapers,
etc. 30 Pieces in each set, 3/32" shank,
120 Mesh diamond, plastic storage
case.
Same as above, except 46 Mesh
ECONOMY
LARGE
PROFILE
DIAMOND (Plated) CARVING TOOL
SET Includes balls, cylinders, tapers,
etc. 30 Pieces in each set, 3/32" shank,
120 Mesh diamond plastic storage case.
DIAMOND GRINDING HEADS
PRICE
$14.00
$14.00
$14.00
$14.00
$14.00
$18.00
ECONOMY DIAMOND (Plated) MEGACARVING TOOL SET Includes balls,
cylinders, tapers, cones, reverse cones
etc. Lots of variety. 50 pieces in each
set, 1/8" shank, 120 mesh diamond,
plastic storage case.
$30.00
571040
ECONOMY
DIAMOND
(Plated)
SLITTER TOOL SET 6 each - 7/8"
diameter blades, one 1/8" shank
mandrel, plastic case
$10.00
576110
SINTERED BIT SET - Set of the 10
sintered DIAMOND carving bits shown
on the left. 3/32" dia. shank, 120 Mesh
diamonds
$120.00
571030
LAMP or TAPER
HEAD STYLE
DIAMETER
(Inches)
ABRASIVE
SIZE
MLS PART
NUMBER
PRICE
STANDARD
STANDARD
3/4
Coarse
3/4
Medium
STANDARD
3/4
Fine
STANDARD
1
Coarse
STANDARD
1
Medium
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
STANDARD
1
Fine
292110
292112
292114
292116
292118
292120
GROOVE GRINDER
1.0 mm, 20 -22 ga. wire
1
Medium
292122
$14.00
GROOVE GRINDER
1.4 mm, 16 -18 ga. wire
1
Medium
292123
$14.00
GRINDING PIN
1/4
Coarse
GRINDING PIN
1/8
Coarse
LAMP OR TAPER
5/8
Medium
292124
292126
292128
$12.75
$12.75
$14.00
DIAMOND CARVING TOOLS (SINTERED)
Sintered diamond tools are multi-layered and last many times longer
than plated tools. Sintered diamond tools have a 3/32" shank (2.35
mm) and 120 Mesh diamonds. Max RPM 25,000.
NEW
DBS-014
Inverted
Cone
DBS-068
Rounded
Disc
DBS-114
Cylinder
DBS-143
Rounded
Cone
DBS-160
Point
DBS-175
Tapered
Cylinder
DBS-200
Rounded
Cone
DBS-274
Flame
DBS-276
Bullet
DBS-523
Cone
DIAMOND CARVING BITS (Sintered)
DIMENSIONS
SINTERED CARVING DISC
MLS PART
NUMBER
576500
PARTS DESCRIPTION
NEOSINT SINTERED CARVING DISC,
50 mm diameter X 1/8” thick, 120 Mesh
diamond, ¼” Shank. Ideal for cutting
and carving larger pieces. It is a favorite
of Jade carvers.
PRICE
$30.00
WE LIKE ROCKS,
ROCKS ARE GOOD!!!
42
STYLE
HEAD
LENGTH
(mm)
HEAD
DIAMETER
(mm)
DBS-014
2.5
6.1
DBS-068
2.8
5.9
DBS-114
14.0
5.2
DBS-143
13.3
3.7
DBS-160
12.5
3.3
DBS-175
14.0
5.1
DBS-200
13.8
3.5
DBS-274
13.8
6.3
DBS-276
14.0
5.3
DBS-523
14.0
5.3
SINGLE BITS
MLS PART No.
Price
576010
576020
576030
576040
576050
576060
576070
576080
576090
576100
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
DIAMOND POWDER, PASTES AND SPRAY
“YOUR LAPIDARY
GENERAL STORE”
MLS
DIAMOND POWDER
DIAMOND
MICRON
SIZE
DIAMOND
MESH
SIZE
1/4
100,000
1/2
50,000
1
14,000
3
8,000
6
3,000
9
1,800
15
1,200
30
600
45
325
60
220 or 260
--
180
80
100
--
80
--
60
DIAMOND
MICRON
SIZE
DIAMOND
MESH
SIZE
1/4
100,000
1/2
50,000
1
14,000
3
8,000
6
3,000
1 CARAT VIAL
5 CARAT VIAL
10 CARAT VIAL
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
MLS PART No.
Price
590010
590020
590030
590040
590050
590060
590070
590080
590090
590100
590110
590120
590130
590140
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$5.00
$5.00
$5.00
$5.00
$5.00
591010
591020
591030
591040
591050
591060
591070
591080
591090
591100
591110
591120
591130
591140
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$15.00
$15.00
$15.00
$15.00
$15.00
592010
592020
592030
592040
592050
592060
592070
592080
592090
592100
592110
592120
592130
592140
$16.00
$16.00
$16.00
$16.00
$16.00
$16.00
$16.00
$16.00
$16.00
$24.00
$24.00
$24.00
$24.00
$24.00
593010
593020
593030
593040
593050
593060
593070
593080
593090
593100
593110
593120
593130
593140
$30.00
$30.00
$30.00
$30.00
$30.00
$30.00
$30.00
$30.00
$30.00
$45.00
$45.00
$45.00
$45.00
$45.00
DIAMOND POWDERS
DIAMOND COMPOUNDS
9
1,800
15
1,200
30
600
45
325
60
220
2 GRAM TUBE
Price
MLS PART No.
580012
580022
580032
580042
580052
580062
580072
580082
580092
580102
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
$4.50
5 GRAM TUBE
10 GRAM TUBE
MLS PART No.
Price
MLS PART No.
Price
580015
580025
580035
580045
580055
580065
580075
580085
580095
580100
$9.00
$9.00
$9.00
$9.00
$9.00
$9.00
$9.00
$9.00
$9.00
$9.00
580110
580120
580130
580140
580150
580160
580170
580180
580190
580200
$17.00
$17.00
$17.00
$17.00
$17.00
$17.00
$17.00
$17.00
$17.00
$17.00
DIAMOND COMPOUNDS - Must be used with some type of EXTENDER FLUID. MLS offers two types of
extender fluids.
MLS PART
NUMBER
781010
781015
25 CARAT VIAL
PARTS DESCRIPTION
PRICE
EXTENDER FLUID, 2 Oz. Dropped
bottle. Silicon based extender fluid used
primarily on horizontal surfaces.
EXTENDER FLUID, 16 Oz. bottle.
Silicon based extender fluid used
primarily on horizontal surfaces.
$6.00
are produced under ultra-modern
laboratory
conditions
using
electronically automated grading
machines. Grading is accomplished
by employing the principles of
“Stokes Law” - not sieves. The end
result yields precision closer than the
Bureau of Standards specifications.
The diamonds used in our products
are all MAN MADE!!!
MLS HAS
AVAILABLE
LARGER SIZED
VIALS OF
DIAMOND
POWDERS.
CONTACT US FOR
PRICES AND
AVAILABILITIES
MLS PART
NUMBER
PARTS DESCRIPTION
PRICE
781020
EXTENDER FLUID - GEM LUBE - By
Diamond Pacific, 2 ½ Oz. Aerosol bottle
silicon extender fluid. Use on canvas,
leather and synthetic polish pads. Used
primarily on vertical surfaces.
$10.45
$17.95
DIAMOND SPRAY
DIAMOND
MICRON
SIZE
DIAMOND
MESH
SIZE
1/4
100,000
1/2
50,000
1
14,000
3
8,000
2 Oz. SPRAY BOT.
MLS PART No.
Price
595010
595020
595030
595040
$15.00
$15.00
$15.00
$15.00
DIAMOND
MICRON
SIZE
DIAMOND
MESH
SIZE
6
3,000
15
1,200
30
600
45
325
43
2 Oz. SPRAY BOT.
MLS PART No.
Price
595050
595070
595080
595090
$15.00
$15.00
$15.00
$15.00
DIAMOND SPRAY is a sensible alternative to
aerosol types. The spray is
available in a 2 Oz. Pump
bottles. The vehicle is designed
to dissipate quickly leaving a
uniform
concentration
of
exposed diamond particles on
the work material. Simply apply
the spray where the polish is
required.
MISC. TOOLS, EQUIPMENT & SUPPLIES
MLS
OPTIVISORS - This binocular magnifier is a necessity for top quality
work. It is designed to flip easily out of the way and can be worn over
glasses. The head band is also adjustable. Lens plates are easily
removed for magnification change. LENS PLATES ARE MADE OF
THE HIGHEST OPTICAL QUALITY GLASS NOT PLASTIC!!!
Lenses are available in 6 different magnification powers. The
optiloupe attachment adds 2 ½ power to any lens.
OPTIVISOR - COMPLETE & ACCESSORIES
1.5X
20 Inches
DA-3
1.7X
14 Inches
DA-4
2.0X
10 Inches
DA-5
2.5X
8 Inches
DA-7
2.7X
6 Inches
DA-10
3.5X
4 Inches
DA-0
HEAD PIECE, NO LENS
LP-1
Adds 2.5 X
LT-06
VISOR LIGHT, 10" Cord
OPTILOUPE
LT-42
VISOR LIGHT, 42" Cord
LT-2204
LIGHT BULB FOR VISOR LIGHT
OPTIVISOR - LENS PLATES
MLS PART No.
Price
MODEL
MAG.
POWER
WORKING
DISTANCE
850010
850020
850030
850040
850060
850070
850005
852010
852020
852030
852040
$51.00
$51.00
$51.00
$51.00
$52.70
$52.70
$25.40
$11.85
$27.35
$27.35
$8.15
LP-2
1.5X
20 Inches
LP-3
1.7X
14 Inches
LP-4
2.0X
10 Inches
LP-5
2.5X
8 Inches
LP-7
2.7X
6 Inches
LP-10
3.5X
4 Inches
1
STYLE
1
200
5"X1"X3/16"
1
400
5"X1"X3/16"
1
600
5"X1"X3/16"
1
1,200
5"X1"X3/16"
2
200
6"X2.5"X1/4"
2
400
6"X2.5"X1/4"
2
600
6"X2.5"X1/4"
2
1,200
6"X2.5"X1/4"
851010
851020
851030
851040
851050
851060
$31.70
$31.70
$31.70
$31.70
$33.30
$33.30
4
3
2
PLATED DIAMOND FILES/BLOCKS
FILE SIZE
(Inches)
Price
PLATED DIAMOND FILES
Remember
ROCKS ARE GOOD!!!!!
DIA. MESH
SIZE
MLS PART No.
8" X 3 1/2" X 1/4"
DA-2
VISOR LIGHT
6" X 2 1/2" X 1/4"
WORKING
DISTANCE
5" X 1" X 3/16"
MODEL
MAG.
POWER
OPTIVISOR with
OPTILOUPE
OPTIVISOR
5" X 1 1/2" X 3/16"
“YOUR LAPIDARY
GENERAL STORE”
PLATED DIAMOND FILES/BLOCKS
MLS PART No.
Price
STYLE
DIA. MESH
SIZE
FILE SIZE
(Inches)
861010
861020
861030
861040
862010
862020
862030
862040
$12.00
$12.00
$10.00
$10.00
$20.00
$20.00
$18.00
$18.00
3
200
8"X3.5"X1/4"
3
400
8"X3.5"X1/4"
3
600
8"X3.5"X1/4"
3
1,200
8"X3.5"X1/4"
4
200
5"X1.5"X3/16"
4
400
5"X1.5"X3/16"
4
600
5"X1.5"X3/16"
4
1,200
5"X1.5"X3/16"
4
400 / 1,200
5"X1.5"X3/16"
MLS PART No.
Price
865010
865020
865030
865040
866010
866020
866030
866040
866060
$34.00
$34.00
$30.00
$30.00
$16.00
$16.00
$14.00
$14.00
$26.00
5 GALLON BUCKET SCREENS
THESES SCREENS FIT
INTO THE TOP OF A
NORMAL
5
GALLON
PLASTIC BUCKET. MADE
FROM
AN
IMPACT
RESISTANT
PLASTIC
BODY AND STAINLESS
STEEL SCREEN. THEY
CAN BE NESTED.
5 GALLON BUCKET SCREENS
SCREEN
SIZE
½"
¼"
8 mesh
12 mesh
20 Mesh
50 Mesh
100 Mesh
44
MLS PART No.
Price
867010
867020
867030
867035
867040
867050
867060
$25.95
$25.95
$25.95
$25.95
$25.95
$25.95
$25.95
“YOUR LAPIDARY
GENERAL STORE”
MLS PART
NUMBER
800010
800020
800030
800040
770010
770020
MLS
PRICE
SMALL ROCK CLAMP - Rock
Clamp by Lortone, This is a smaller version of
$19.95
LARGE ROCK CLAMP - Rock
Clamp by Lortone, Sturdy parallel aluminum
jaws with 2 sizes of hold down grooves. This is an
inexpensive way to hold large pieces for slabbing.
5 inch opening
LRG-1 ROCK GRIPPER
by Lortone, All
steel plated construction with pivoting top bar.
GATOR JAW
by Lortone, Stainless steel
construction, fits Lortone models LS12 and LSS14P saws.
FEATHERING DISC ADHESIVE /
CEMENT by 3M, This lapidary wheel cement is
pressure sensitive. It allows all types of discs to be
placed on and removed from sponge rubber
surfaces or metal discs repeatedly. 5 Oz. Tube.
FEATHERING DISC ADHESIVE /
CEMENT, 17 Oz. spray can.
Jerry’s clamp. This vise is sized to work well in
smaller trim and slab saws.
GATOR JAW
$45.00
$65.00
PULLEY
O.D.
SHAFT
DIA.
1 ½"
1/2 Inch
2"
5/8 Inch
FEATHERING DISC
ADHESIVE
SPRAY CAN
2"
3/4 Inch
2 1/4"
1/2 Inch
2 ½"
1/2 Inch
2 ½”
5/8 Inch
2 ½"
3/4 Inch
2 ¾"
1/2 Inch
$19.50
EPOXY
EPOXY 220
760010
by Hughes, Epoxy 220 bonds
almost anything to anything. It has high heat and
abrasion resistance and is not prone to running.
Amber color. Hardens in 2 hours. 1 Oz. Set.
$4.50
760020
EPOXY 220
by Hughes, Same as above
except 8 Fl. Oz. Set (2 - 4 Oz. Bottles.)
$22.00
760030
EPOXY 220
$31.50
FLANGE
O.D.
SHAFT
DIA.
$4.50
1½“
1/2 Inch
TENAX
EPOXY 330
761010
by Hughes, Epoxy 330 bonds
almost anything to anything. It has high heat and
abrasion resistance and is not prone to running.
Water clear. Hardens in 2 hours. 1 Oz. Set.
1 ½"
5/8 Inch
2"
1/2 Inch
761030
EPOXY 330
$31.50
2"
5/8 Inch
750010
ATTACK by Hughes, Epoxy dissolver, 8 Fl. Oz.
$13.00
2"
3/4 Inch
3"
5/8 Inch
750020
ATTACK
by Hughes, Epoxy dissolver, 64 Fl.
Oz. Can (½ Gallon).
$46.00
3"
3/4 Inch
762010
OPTICON
$22.50
771010
TENAX
EPOXY 330
771020
Can.
by Hugh, Resin based fracture
sealer, two part. 8 Fl. Oz. Total volume.
by Hughes, Super glue, water clear,
quick bonding, no mixing. ¼ Fl. Oz. Plastic bottle.
TENAX+PLUS
by Hughes, Super glue, water
clear, quick bonding, no mixing, thickened for gap
filling. ¼ Fl. Oz. Plastic bottle.
OPTICON
by JBFC, Dissolves
SUPER GLUE, 2 Fl. Oz. Plastic dropper bottle.
$6.95
773010
E-6000 Co-polymer formula, will bond just about
$4.70
E-6000 Co-polymer formula, will bond just about
anything to anything, water clear. 3.7 Fl. Oz. Tube.
ATTACK
J325
J325D
$4.75
SUPER SOLVENT
773020
774020
heavy build epoxy, like 50 coats of
sealer, water clear high gloss. 8 Fl. Oz. ( 2 - 4 Fl.
Oz. Bottles) Enough for 2 square feet.
POUR-ON
heavy build epoxy, like 50 coats of
sealer, water clear high gloss. 32 Fl. Oz. ( 2 - 16
Fl. Oz. Bottles) Enough for 8 square feet.
$16.10
$38.60
OXALIC ACID,
$6.00
750015
OXALIC ACID,
$27.00
751011
SULFAMIC ACID,
$6.00
751015
SULFAMIC ACID,
$27.00
white powder/crystals, mix
with water to clean quartz crystals etc. 5 Lb.
white powder/crystals,
mix with water to clean copper etc., 1 Lb.
white powder/crystals,
mix with water to clean copper etc., 5 Lb.
050010
050020
050030
050040
050050
050060
050070
050080
$3.95
$4.20
$4.20
$4.40
$4.80
$4.80
$4.80
$4.80
MLS PART No.
Price
020010
020020
020030
020040
020050
020060
020070
$3.40
$3.40
$3.90
$3.90
$3.90
$4.90
$4.90
J347
J346
METAL TEMPLATES
$7.30
750011
white powder/crystals, mix
with water to clean quartz crystals etc. 1 Lb.
Price
J327
J327D
J326
J326D
J345
POUR-ON
774010
MLS PART No.
$4.25
751010
anything to anything, water clear. 1 Fl. Oz. Tube.
LRG-1
STEEL FLANGES (Plated)
$22.00
761020
LARGE
ROCK
CLAMP
V-BELT PULLEY (Cast Aluminum or Zinc)
$29.50
$23.05
SMALL
ROCK
CLAMP
FEATHERING DISC
ADHESIVE
TUBE
EPOXY
COAT
MODEL
J325
J325D
J326
J326D
J327
J327D
STYLE
Blue Metal
Blue Metal Double
Gold Metal
Gold Metal Double
Red Metal
Red Metal
MLS PART No.
Price
830010
830020
830030
830040
830050
830060
$6.70
$15.75
$6.70
$15.75
$6.70
$15.75
PLASTIC TEMPLATES
45
MODEL
J345
J346
J347
STYLE
Frosted Plastic
Frosted Plastic
Frosted Plastic
MLS PART No.
Price
831010
831020
831030
$5.00
$5.00
$5.00
“YOUR LAPIDARY
M
L
S
GENERAL STORE”
MLS
innesota
MLS PART
NUMBER
apidary upply
PRICE
OVERHEAD WATERING SYSTEM
(OWS), Lortone, Convenient free standing
801010
gravity feed water supply for any lapidary grinder
or other use where a water supply is needed.
Includes 1 ½ quart plastic tank, valve, tubing and
stand.
$39.50
UNDER WHEEL
FOUNTAIN
UNDER WHEEL FOUNTAIN (UWF),
801020
Lortone, Plated steel fountain head supplies
coolant to diamond wheels. Complete with plastic
tubing, fountain head and pump.
802010
APRON,
Vinyl apron with drip edge and 2
shoulder straps.
$6.50
803010
WOODEN DOPS,
$3.75
803020
Package of 12 assorted
diameters wooden dop sticks, 4" long.
DOP POT -
By Raytech, milled solid block of
aluminum with Ceramic heater maintains
temperature. Large apron to heat stones on.
RAYTECH - DOP POT
$34.00
OVERHEAD
WATERING SYSTEM
ALCOHOL LAMP
DOP WAX
$60.00
DOP POT -
803025
By Inland, electric dop pot with
Ceramic heater maintains temperature, On-Off
switch all plastic construction wide rim to preheat
stones on.
$34.95
INLAND - DOP POT
RIKER MOUNTS
ALCOHOL LAMP (AL),
803040
803050
Lortone, Glass
alcohol lamp for dopping stones. Faced base
makes lamp stable when tipped.
Use with
denatured alcohol.
DOP WAX - RED,
Low temperature, 1 Lb.
Box, 4 - ¼ Lb. Sticks. For use with heat sensitive
stones.
803060
DOP WAX - GREEN, Medium temperature,
803070
DOP WAX - BLACK, High temperature,
804010
804020
804030
804040
804050
1 Lb. Box, 4 - ¼ Lb. Sticks.
1 Lb. Box, 4 - ¼ Lb. Sticks.
CARAT / GRAM SCALE - High
Accuracy, Model A-03, 20 gram X 0.002g or
100 carat X 0.01 ct. capacity, with test weights,
reads in ct, g, oz, dwt.
CARAT / GRAM SCALE, Model
A-07, 200 gram X 0.2 or 1,000 carat X 1.0 ct.
capacity, reads in ct, g, oz, dwt.
DIGITAL CALIPER - SMALL, 3 function,
0 to 4" or 0 to 100 mm capacity, inside, outside,
depth.
DIGITAL
$16.90
$16.90
FILE SET - SMALL
$16.90
HARDNESS TESTER
KIT
$60.00
$26.00
FILE SET - LARGE
MOFFATT FLEX
LAMP
$40.00
CALIPER - LARGE, 3
function, 0 to 6" or 0 to 155 mm capacity, inside,
outside, depth.
$50.00
HAND LENS,
$16.35
10X Magnification, 1" dia.
Lens, metal and glass construction.
A-07
CART/GRAM SCALE
$7.50
DIGITAL CALIPER
MLS PART
NUMBER
HARDNESS TESTER KIT,
804060
805010
805020
806010
806020
806025
806030
Mineralab,
contains 4 double ended hardness test probes,
glass plate, streak plate, magnet and sharpening
stone, all in a wooded case.
FILES,
Diamond Plated, Small Size, Set of 10,
140 mm X 3 mm, basic types of files including
flats, round, half round, triangle, etc.
FILES,
Diamond Plated, Large Size, Set of 5,
215 mm X 80 mm, basic types of files including
flats, round, half round, triangle, etc.
RIKER MOUNT - 5" X 6"
$84.00
801060
$17.00
801070
$25.00
807010
801040
cubic foot tote bin. Screens include ¼", 3/8", ½",
¾" and 1". One of the handiest tools I have in my
shop.
SUPER SPONGE,
Synthetic, 5 ½" X 7 ½" X
2", soaks up lots of water.
LAP
GOLD & SILVER
TEST KIT
PRICE
$125.00
$4.75
POLISHING
These hard to find 180 mesh
silicon carbide impregnated mesh discs are used
on the “Rockhound Delight” dry lap polisher and
similar machines and offer one step operation from
start to finish with no messy clean-up. Grinds and
polishes geodes or slabs with ease.
$6.00
GOLD and SILVER TEST KIT,
MOFFATT FLEXIBLE LAMP (MFL),
A flexible goose-neck lamp for adding light to your
work area. Includes angle mounting bracket, 18"
long flexible neck, 6 foot cord.
MANUAL SEPARATING SCREEN
SET, Raytech, Sep of 5 polymer screens and 1
16"
DRY
SCREENS,
$8.05
$12.10
$14.75
$18.00
SEPARATING
SCREEN SET
808010
$76.00
46
by
Craig. One drop of the proper solution will tell you
if the metal is gold or silver or base metal. Easy to
use. Enough reagent for many tests.
$34.95
ROCKHOUND TOOLS
“YOUR LAPIDARY
M
L
S
GENERAL STORE”
MLS
innesota
apidary upply
MLS PART
NUMBER
PRICE
720010
ROCK PICK - POINTED TIP, Estwing
#E3-14P, 14 Oz., 11" long
$39.50
720020
ROCK PICK - POINTED TIP, Estwing
#E3-22P, 22 Oz., 13" long
$40.85
720030
ROCK PICK - POINTED TIP LONG
HANDLE, Estwing #E3-23LP, 23 Oz.,
16 ½" long
$45.30
720040
ROCK PICK - POINTED TIP
LEATHER GRIP, Estwing #E-30, 22
Oz., 12 ½" long
$45.70
721010
ROCK PICK - CHISEL TIP, Estwing
#E3-12PC, 12 Oz., 10" long
$39.10
721020
#E3-20PC, 20 Oz., 11" long
$39.30
721030
#E3-24PC, 24 Oz., 11" long
$41.60
722010
CHIPPING HAMMER, Estwing
#E3-WC, 14 Oz., 11" long
$33.45
723010
CRACK HAMMER, Estwing # B32LB, 2 Lb., 10 ½” long
$36.25
723020
CRACK HAMMER, Estwing # B33LB, 3 Lb., 11" long
#3
SHEATH
$36.25
(Closed end)
723030
CRACK HAMMER, Estwing # B34LB, 4 Lb., 11 ½” long
$40.80
723040
CRACK HAMMER - LONG HANDLE,
Estwing # B3-4LBL, 4 Lb., 16" long
#4
SHEATH
$42.75
(Open End)
723050
GEO-PALO PICK, Estwing #GP-100,
4 Lb., 25" long
$80.20
724010
GAD PRY BAR, Estwing, 1 Lb., 18"
long
$47.50
725030
CHISEL, Estwing #ERC-7C, 2 3/8"
wide chipping edge by 7" long
$21.40
725040
CHISEL, Estwing #ERC-8C, 1 1/8"
$21.65
725050
CHISEL, Estwing #ERC-9C, ¾"
square tip for splitting a crack by 9" lg.
$21.55
725060
CHISEL, Estwing #ERC-12C, 5/8"
$21.55
726010
LEATHER SHEATH, Estwing #3, for
pointed rock picks
726020
LEATHER SHEATH, Estwing #4, for
chisel rock picks
728015
ROCK BAG, by Great South Mineral,
Based on an WWII canvas Army
ammunition bag.
Has adjustable
strap and hard back. Measures 18" H
X 10 ½" H X 4" D, several pockets
730010
729010
COLLAPSIBLE CANVAS BUCKET Heavy duty canvas bucket, 9" Dia. by
12 ½" Tall when expanded. (9" by 1"
when collapsed), bright RED in color.
TREASURE
SCOOP,
by
Fundamental
Rockhound,
all
aluminum construction, 36" long, vinyl
cushion handle. One of the best
rockhounding tools on the market.
ROCK PICK
ROCK PICK LONG HANDLE
GEO-PALO PICK
CRACK HAMMER
ERC-7C CHISEL
ERC-8C CHISEL
ERC-9C
CHISEL
ERC-12C
CHISEL
GAD PRY BAR
EXPANDED
BUCKET
TREASURE SCOOP
ROCK
BAG
COLLAPSED
BUCKET
GOLD PAN
“TOP HAT”
MAGNET
MLS PART
NUMBER
GOLD SLUICE BOX
PRICE
729011
TREASURE SCOOP, LONG, Same
as above except 42" long.
$47.00
$10.50
701005
GOLD PAN - PLASTIC, Estwing
#BP-10, 10" dia.
$4.20
$11.10
701010
#BP-12, 12" dia.
$5.15
701020
#BP-14, 14" dia.
$7.35
701030
#BP-16, 16" dia.
$8.90
$28.00
$14.00
700010
$43.00
700020
GOLD SLUICE BOX, by Jobe,
Sturdy, lightweight aircraft aluminum
sluice box with hundreds of mini
riffles.
Legs fold under for easy
storage or transport, 10" X 36", 7 Lb.
TOP HAT magnet for GOLD
prospecting.
Remove magnetic
material from pan.
$109.95
$10.95
“ESTWING” TOOLS ARE AMERICAN MADE!!!!
47
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
Is This an AGATE?
By Susan Robinson, 23 pages, Full color - Softcover
Susan writes and illustrates this book. It answers that
basic question of what a Lake Superior Agate is! It
does this by many excellent full color illustrations. In
fact Susan’s illustrations are better than most peoples
photographs. Copyright 2001.
The “AGATE” Books
MLS Part #: 900600
Price: $8.95
South Dakota Fairburn Agate
By Roger Clark, 80 pages, Colored - Softcover
TOTALLY REVISED/REWRITTEN 2009
THE LAKE SUPERIOR AGATE - 4th Edition
By Scott F. Wolter, 111 pages, Colored - Softcover
REVISED AND UPDATED. The agate book that started it all!!! More
new pictures added. Several new chapters added. If you have collected
editions 1 thru 3, you will want this one for your collection.
This book provides an unequaled view of this highly prized agate and
fascinating information for the dedicated rockhound. Over 300 beautiful
colored photos by Mary Jane Clark. Over the last 22 years the author in
search of new finds, has explored agate hunting areas such as
grasslands, badlands and Black Hills.
MLS Part #: 900000
MLS Part #: 900200
Price: $24.95
The Lake Superior Agate ONE MAN’S JOURNEY
By Scott F. Wolter, 180 pages, Colored - Softcover
The River Runs North
By Tom Harmon, 104 pages, Full color - Softcover
This book provides a history of the MONTANA MOSS
AGATE. How were they formed, where are they
found? Many great pictures of what I feel is one of the
most beautiful agates in the world.
The second of Scott’s books on the Lake Superior Agate. This is a must
read for anyone who has read Scott’s previous book. Includes 62 allnew color pictures of amazing specimens, entering tales about the
“lakers”, Moose Lake days, the ups and downs of picking agates and
much more.
MLS Part #: 900100
Price: $28.95
MLS Part #: 900140
Price: $49.95
The How - To’s of Cabbing and Carving Montana
Agates and Other Chalcedonys
By Tom Harmon, 46 pages, Full color - Softcover
AGATES INSIDE OUT
By Karen Bartz, 256 pages, Colored - Softcover
Ever wonder how an agate was formed? Karen covers this topic in great
detail covering the 3 major formation theories. Great photographs. This
book creates a solid foundation for further agate studies. The book also
covers where agates are found, what they look like when you find them.
Primary focus is on agates of the U.S.
MLS Part #: 900120
Price: $27.95
Tom’s second book on the Montana Moss Agate. He tells you how to
work this tough to work stone and make exotic carvings and other items
out of them. Tom is perhaps the top world expert on this type of work.
Great colored pictures throughout the book.
Price: $24.95
MLS Part #: 900160
Price: $29.00
AGATES OF LAKE SUPERIOR
By Bob and Dan Lynch, 144 pages,
FULL Color - Softcover
Hot off the press, the NEWEST Agate Book. Bob and
Dan have hit another one out of the part. An
exquisitely detailed book about the Lake Superior
Agate. Fantastic full color photos of some of the best
agates.
AGATES - TREASURES OF THE EARTH
By Pabian, Jackson, Tandy & Cromartie, 182 pages,
hardback, FULL color - Softcover
A 2006 Firefly book. Talks about agate formation,
what an agate is, where they are found (the many
different world locations). Many great colored pictures.
MLS Part #: 900130
MLS Part #: 900730
Price: $19.95
Price: $35.00
LAKE SUPERIOR - ROCKS AND MINERALS
By Bob and Dan Lynch, 208 pages, FULL Color Softcover
Hot off the press, the NEWEST Agate Book. Its all
about the rocks in the Lake Superior region. Show
many samples of rough as well as polished rocks.
Ever wanted to know what a “Floater Agate” is, this
book will show and tell you.
Amazing Agates
By Wolter and Kollath, 36 pages, Full color - Softcover
Including information on how agates formed, where to
find them, how to clean and treat them and how to
finish them. Also includes Scotts table of value to
grade them. Both illustrations and photos.
MLS Part #: 900720
MLS Part #: 900150
Price: $12.95
Price: $9.95
Rock Picker’s Guide to Lake Superiors North
Shore
By Mark Stensaas, 43 pages, Full color - Softcover
Questions such as “Is this an agate?”, “Where can I
find agates?” and others are answered in this book.
Lots of maps and pictures. Hand illustrated by artist
Rick Kollath. Copyright 2000.
Lake Superior Agates - Identify AGATES
NEW
AND Imposters!
By Magnuson and Wood, 20 panels, Full color
On one side beautiful full color pictures of AGATES
AND IMPOSTERS. The other side common agate
features and characteristics. Heavy plastic laminated
both sides, folded for your backpack.
MLS Part #: 900500
MLS Part #: 900170
Price: $9.95
48
Price: $8.95
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
NEW
The “GAZETTEERS” Series
By Various, Approx 100 pages, Color - Softcover
Take a normal sized U.S. road atlas, now make it for
only one state at a time. That’s what the “Gazetteer
Atlas” is. Essentially EVERY (paved) and most dirt
roads in the state are shown. Shows state and federal
lands, topographic details, recreation sites and GPS
grids. Some other points of interest are also shown.
Lake Superior Agates Field Guide
By Dan & Bob Lynch, 160 pages, Full color - Softcover
Covers identification of different type of Lake Superior
agates, where to find them in the Lake Superior water
shed. A great deal of the book covers a description of
the different type of agates.
MLS Part #: 900180
Price: $12.95
MLS PART
NUMBER
NEW
Agate Hunting Made Easy
By Jim Magnuson, 118 pages, Full color - Softcover
Covers identification of different type of Lake Superior
Agates, agate imposters, where to find agates and
how to care for agates including sorting, cleaning and
treating agates.
MLS Part #: 900190
Price: $12.95
The Wonder of NORTH AMERICAN Agates
By Dan & Bob Lynch, 136 pages, Full color - Softcover
There are more types of agates than Lake Superior
Agates. This book covers some of the other types
found in the North American continent. Over 60 types
of agates are covered. Excellent photographs!!!!!
MLS Part #: 900210
901350
901360
901370
901380
901390
NEW
$19.95
$19.95
$19.95
$19.95
$19.95
IOWA
MINNESOTA
NORTH DAKOTA
SOUTH DAKOTA
WISCONSIN
Much more than a fee-mining guide, this unique book is a treasure trove
on interesting things to see and do relating to rocks, minerals,
gemstones, crystals, fossils, gold and other wonders of the earth. With
270 sites listed in 31 eastern states.
Price: $14.95
MLS Part #: 901400
Price: $15.95
Fee Mining & Mineral Adventures in the Western
U.S.
By Monaco, 240 pages, B&W - Softcover
Revised edition. Informative guide to over 94 collecting locations. Also
includes 150 museums, caves, points of interest, fairs and festivals
throughout the western states. Seasons, days and hours of operations
are given.
Price: $17.95
MLS Part #: 901500
Price: $15.95
Treasure Hunter’s Gem & Mineral Guides Series
By Kathy Rygle, Approx 170 pages, B&W - Softcover
Newly revised, these guides offer state-by-state details
on more than 250 gems and minerals the U.S. has to
offer and affordable “fee-dig” sites where they can be
found. Includes maps and illustrations and B/W photos.
Also includes listing of annual “rockhound” events as
well as a listing of museums and showplaces.
NEW
The FAIRBURN Agates of the Black Hills
By Magnuson & Wood, 143 pages, Full color Softcover
Subtitled “100 Unique Storied Agates”. A complimentary/sister book to “
The Storied Agate“. This contains the best of the best Fairburn agates in
extremely high quality color picture. A great coffee table book.
MLS Part #: 900230
PRICE
Fee Mining & Mineral Adventures in the Eastern
U.S.
By Monaco, 264 pages, B&W - Softcover
The Storied Agate
NEW
By Magnuson & Wood, 143 pages, Full
color - Softcover
Some of the most well know and most beautiful Lake
Superior Agates are covered. Some stories and
legends are given. Extremely high quality color
pictures. A great coffee table book.
MLS Part #: 900220
PARTS DESCRIPTION
Price: $17.95
MLS PART
NUMBER
COLLECTING
901000
901100
901200
901300
PARTS DESCRIPTION
NORTHEAST U.S.A.
NORTHWEST U.S.A.
SOUTHEAST U.S.A.
SOUTHWEST U.S.A.
COAST TO COAST GEM ATLAS 5th Edition
By Johnson, et. al. 60 pages, Softcover
A companion to the “Gold Diggers Atlas”. Shows you
by maps where gemstones as well as other important
rocks (like agates) have been found around the U.S.
(also shows locations of rock shops). I have used this
book myself it’s not bad.
The GPS Guide to Western Gem Trails
By David Kelty, 239 pages, B&W - Softcover
Over 1200 sites listed by GPS coordinates in the
western states. Know how you use to get directions to
a location; “Go down to the big sign on the left, turn
right, go 8 or 10 miles, turn left at the big tree……",
NOT ANY MORE!!! Revised edition.
MLS Part #: 901050
MLS Part #: 901600
Price: $11.50
49
Price: $19.95
PRICE
$14.99
$14.99
$14.99
$14.99
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
GEOLOGY
GOLD
Minnesota Underground & the Best of the Black
Hills
By Doris Green, 175 pages, B&W - Softcover
There are caves in Minnesota!!! This book reviews the
major caves and mines in the area. Lots of maps and
pictures.
Also covers the topics of sinks and
disappearing streams. Copyright 2003.
The Weekend Gold Miner
By Ryan 80 pages, B&W - Softcover
One of the most popular and inexpensive of the gold
titles. The author becomes a personal guide to finding
gold and getting it out.
MLS Part #: 901900
MLS Part #: 902600
Price: $18.95
Price: $5.95
Geology of the Lake Superior Region
By Gene LaBerge, 313 pages, B&W - Softcover
A very well written book about why lake Superior is
where it is. I use this book as the basis for lectures I
give about the geology of the state of Minnesota. This
book tells you why the Lake superior agate is found
where it is found.
Recreational Gold Prospecting for Fun and Profit
By Butler, 206 pages, B&W - Softcover
Learn about the basic geologic properties of gold and
terrain where it is found; become familiar with the
various techniques and equipment used by
prospectors; get tips on how to plan a family gold trip.
MLS Part #: 902200
MLS Part #: 902650
Price: $22.00
Price: $12.95
Minnesota’s Geology
By Ojakangas and Matsch, 252 pages, B&W Softcover
Lots of maps, diagrams and photos. This book covers
the Minnesota’s geology in detail!!!! An excellent
source of geological information.
Modern Prospecting – How to find,
NEW
claim and sell mineral deposits
By McPherson, 301 pages, B&W, - Softcover
Written in 2003. Tells how to research for existing
claims, file a claim, prove a claim and sell a claim.
Also the basic tools for prospecting. Very up to date.
MLS Part #: 902300
MLS Part #: 902675
Price: $29.95
Roadside Geology of Minnesota
By Ojakangas, 350 pages, Full Color - Softcover
Finally a Roadside book on Minnesota. First of the
Roadside books in FULL COLOR. Ojakangas knows
his stuff when it comes to Minnesota’s geology. A
great reference book!!! Copyright 2009.
MLS Part #: 902350
Price: $14.95
JEWELRY MAKING
Price: $26.00
Roadside Geology of Wisconsin
By Dott and Attig, 346 pages, B&W - Softcover
This is the latest installment in the Roadside Geology
books. Covers the state of Wisconsin in the same
complete and detailed manner as the other Roadside
books. Copyright 2004.
Jewelry Craft Made Easy
By French, 72 pages, B&W.
For those who prefer purchasing finished gemstones
and mountings; and assembling unique jewelry.
Detailed instructions and illustrations cover a wide
variety of jewelry and topics.
MLS Part #: 902400
MLS Part #: 902710
Price: $20.00
Price: $5.95
NEW
101 American GEO-SITES
By Dickas, 250 pages, Full Color - Softcover
After you have busted your buns digging rocks, how
about visiting 101 sites around the 50 states where
weird and strange Geological phenomena occur, such
as racing rocks, natural bridges, monoliths, slit
canyons etc.
How to Repair Jewelry
By William Phelps, 30 pages, B&W and Colored.
The basic procedures to repair jewelry are covered.
Topics include the basic jewelers bench and basic
tools, ring sizing, setting stones, chains, jump rings,
soldering, stone setting, Indian jewelry and much
more.
MLS Part #: 902425
MLS Part #: 902750
Price: $24.00
50
Price: $5.00
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
How to make Wire Jewelry - Simple but Elegant
By Jenkins & Thrasher, 30 pages, B&W and Colored. Softcover
One of the “simplest” ways to make jewelry is by the
wire wrapping technique. This book covers the basics
of wire wrapping and more.
Cabochon Cutting
By Jack R. Cox, 65 pages, B&W - Softcover
The instructions in this book are mostly for silicon
carbide abrasives and oxide polishes, which be-cause
of their low cost, are favored by many gem cutters,
especially beginners. However, the basic techniques
presented here are adaptable to diamond abrasives.
Instructions with many photos.
MLS Part #: 902775
MLS Part #: 904100
Price: $6.00
Price: $6.00
The Basics of Bead Stringing
By Kanan 82 pages, B&W - Softcover
Addresses the most common and popular questions of
those who would like to begin designing and producing
their own jewelry. Step by step lessons are given with
wire techniques, leather and string.
Advanced Cabochon Cutting
By Jack R. Cox, 65 pages, B&W - Softcover
This book is a companion book to "Cabochon Cutting".
This book has instructions for cutting special shapes hearts, crosses, teardrops, etc. Many interesting
effects can be produced by combining two or more
gem materials which is also covered. Instructions and
many photos.
MLS Part #: 902900
MLS Part #: 904200
Price: $9.95
Beading with Cabochons
By Eakin, 128 pages, Full color - Hardcover
The only current comprehensive guide to working
with cabochons that cover all the basics as well as a
range of new creative techniques and hot trends.
Includes sections on tools, materials, bead selection
with all color photos and illustrations.
MLS Part #: 903550
Price: $6.00
The Art of Gem Cutting
By Dake, 96 pages, B&W - Softcover
Teaches how to buy rough stones, cut the gems, choose the right
equipment and how to properly use the equipment. Popular guide that
gets the reader started on the right path and builds an interest in many
phases of the hobby of gem cutting. First published in 1969, however it
still applies to today.
Price: $24.95
MLS Part #: 904300
Price: $6.00
Wire Wrapping
NEW
By Chandler & Ritchey, 128 pages, Full
color - Softcover
Learn to create stunning wire jewelry designs, no
experience required! Basics including safety, tools,
materials, metals for wirework.
The essential
techniques are covered step-by-step.
Opal & Gemstone Jewelry
By Downing, 309 pages, Colored photos - Softcover
Whether opal, agate, jade or tiger-eye, this book
provides step-by-step instructions taking you from
rough to finished jewelry. About half of the book is
about opal, the other half other gemstones. Copyright
2009.
MLS Part #: 902950
MLS Part #: 904400
Price: $22.95
Facet Cutter's Handbook
By Edward J. Soukup, 64 pages, B&W - Softcover
This book was written for the primary purpose of
helping the beginning faceter and those who still
consider themselves in this class. This new addition
combines the information from "Elementary Faceting
Instructions" (now out of print) & the 1st edition of
"Facet Cutter's Handbook" into one book.
LAPIDARY ARTS
MLS Part #: 904500
FLINTKNAPPING - Making & Understanding Stone
Tools
By John C. Whittaker, 341 pages, B&W - Softcover
the traditional methods as well as the newer techniques.
Price: $27.95
How To Use Diamond Abrasives To
Gemstones
By Arthur L. Riggle, 31 pages, B&W - Softcover
The Complete Metalsmith
By Tim McCreight, 198 pages, B&W - Softcover
Now revised and expanded, this classic hand-book
gives fuller coverage to familiar techniques and adds
many new procedures to its already encyclopedic
breadth. The straightforward text and instructive, clear
drawings bring even complex techniques within
everyone's reach.
Cut
In this book you will learn how to use diamond machinery, accessories
and supplies to cut cabochons and small flat stones. Several methods
are covered, so that you may select those that best fit your needs. The
author has extensive experience in the field and has put them together
here in this useful guide.
MLS Part #: 904000
Price: $5.00
METAL WORKING
Simply put, this is the best book I have ever come upon on the subject of
flint knapping. John reviews many different techniques. He looks at both
MLS Part #: 903700
Price: $29.95
Price: $5.50
MLS Part #: 904700
51
Price: $19.95
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
Practical Casting
By Tim McCreight, 153 pages, B&W - Softcover
Explains many aspects of small scale casting with
clarity and comprehension. Includes hundreds of
helpful drawings and many shortcuts that will help
even advanced craftspeople. Instruction in the traditional lost wax method, also sand casting, direct
methods like cuttlefish and bronze casting.
Simon & Schusters Guide to Gems & Precious
Stones
Edited by Kennie Lyman, 384 pages, Full color - Soft
This guide provides both the connoisseur and the
casual collector with a compact, easy-to-use volume
describing more than 100 rare varieties of minerals
whose beauty and mystery have possessed our
imaginations from time immemorial.
MLS Part #: 904800
MLS Part #: 905800
Price: $18.95
Price: $17.95
Handbook Of Lost Wax & Investment Casting
By James E.Sopcak, 64 pages, B&W - Softcover
How to construct and use equipment to develop
patterns, castings, and molds for jewelry and small
metal parts. This book contains detailed information
and tips on the processes and also includes numerous
photographs. A very well organized step-by-step
manual.
Gem Identification Made Easy
By Matlins & Bonanno, 322 pages, Some color photos.
Enjoy learning the tools of the gem trade from two
experts. This book explains in non-technical term and
shows how to identify diamonds and colored gems and
to separate them from imitations and look-a-likes. The
book's approach is direct and practical and its style is
easy to understand.
MLS Part #: 904900
MLS Part #: 905900
Price: $5.50
Price: $36.99
ROCKS, MINERALS,
GEMS and FOSSILS
IDENTIFICATION
FRED WARD GEM BOOK SERIES
All Softcover
Popular series focusing on individual gems & their outstanding color.
Contains history & lore as well as sources and buying tips. Beautiful
full color photos throughout. 64 pages in each book, Full color.
GOLDEN GUIDES
All Softcover
Popular identification guides for the student or
the collector. This trusted series contains
accurate, up-to-date information along with
detailed, full color illustrations and maps.
Rocks, Gems and Minerals (revised formerly
Rocks & Minerals).
MLS PART
NUMBER
905100
905200
905300
905400
PARTS DESCRIPTION
“ROCKS, GEMS and MINERALS”
“FOSSILS”
”GEOLOGY”
“ROCKS and MINERALS - FIELD
IDENTIFICATION”, 280 pages
MLS PART
NUMBER
906100
906200
906300
906400
906500
906600
PRICE
$6.95
$6.95
$6.95
$14.95
Audubon Guide to North American Rocks and
Minerals By Chesterman, 850 pages, Color photos
Seven hundred ninety-four color plates are cross
referenced to detailed descriptions of field patterns
and rock locations. Excellent and comprehensive
index. Guidelines for collecting procedures, key to
identification, and a mineralogical glossary. Twice the
photos & descriptions as other guides.
MLS Part #: 905500
PARTS DESCRIPTION
“OPALS”
“DIAMONDS”
“EMERALDS”
“PEARLS”
“RUBIES and SAPPHIRES”
“JADE”
Gemstones of the World
By Walter Schumann, 282 pages, Full color Hardcover
Classic best-seller. All color with 1,500 photos of gems in the rough and
in polished states. This book is revised and expanded. Features
precious and semiprecious stones. Complete physical properties and
characteristics are covered. Schumann offers full coverage of the optical
features of gems light and color.
Price: $19.95
MLS Part #: 906700
Price: $24.95
Simon & Schusters Guide to Rocks & Minerals
By Prinz, Harlow & Peters, 608 pages, Full Color - Soft
A practical field guide. Includes more than 1000
illustrations, 600 in spectacular full color. Concise and
easy to use, this guide contains everything that a rock
and mineral enthusiast needs to know. Recommended
for serious or amateur collectors. This beautiful guide
will prove an invaluable reference.
MINNESOTA - ROCKS AND MINERALS
By Bob and Dan Lynch, 228 pages,
FULL Color - Softcover
A must have guide to Minnesota’s rocks and minerals.
Full-colored photos and details make it simple and fun
to identify your finds. The authors know just what to
depict in order to make I.D. a snap.
MLS Part #: 905600
MLS Part #: 900680
Price: $19.00
52
Price: $14.95
PRICE
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
BOOKS
“YOUR LAPIDARY
GENERAL STORE”
MLS
Handbook of Rocks Minerals and Gemstones
By Schumann, 380 pages, Full Color - Softcover
Written for the layman and scientist, with a description
of the properties and characteristics of each rock and
mineral. Complete with 600 color photos.
The Rockhound's Handbook
By James R. Mitchell, 184 pages, B&W - Softcover
Learn rock & mineral formation, tools, identification,
finding minerals in the field, legal aspects, prep&
preservation, cutting & polishing & making jewelry from
your finds. Numerous illustrations & black &white
photos. Color photos highlight over 50 of the most
commonly encountered minerals.
MLS Part #: 905650
MLS Part #: 907600
Price: $25.00
Price: $15.95
Collecting Rocks, Gems and Minerals
By Polk, 271 pages, Full Color - Softcover
Three guides in one!!! Identification, values and
LAPIDARY USES!!!! Quick reference format arranged
by category and color of stone. Covers both lapidary
and mineral display materials. Provides values and
tips for locating, buying and collecting.
The Practical Geologist
By Dixon & Bernor, 160 pages, Color - Softcover
If you want to know something about geology and
don’t have a degree in it, THIS IS THE BOOK FOR
YOU. Goes over the basics of geology, lots of great
colored pictures.
MLS Part #: 907300
MLS Part #: 907350
Price: $19.99
Price: $16.95
NEW
DK Smithsonian Rock and Gem
By Bonewitz, 360 pages, Full color - Softcover
Calendar of Fine Agates and Jaspers
By The Gem Shop, 12 Months, Full Color- Softcover
The Gem Shop does an OUTSTANDING job
producing this HIGH quality calendar. Cover such as
Lake Superior agates, Plume agates, Willow Creek
jasper, Geodes, and on and on. EXCELLENT!!!!
MLS Part #: 907050
MLS Part #: 909000
This stunning 11" x 9" compendium displays every feature of the Earth’s
geologic splendor --- from the primeval origins of rocks, gems and fossils
to their astonishing modern-day uses and appeal. Striking visual profiles
present key info for accurate I.D., practical advice is given on how to cut,
polish and display objects; their mythological and legendary significance
throughout history is explored.
Price: $24.95
Audubon Guide to North American Fossils
By Ida Thompson, 846 pages, Color - Softcover
The first all-photographic field guide. Each of the 474
identification pictures is a full-color photograph of a
fossil. Sponges, corals, trilobites, shells, teeth, bones,
and many other types are represented. Also included
are 33 color photographs of fossil-bearing rocks and
outcrop formations, plus 15 maps.
MLS Part #: 907000
Price: $11.95
TUMBLING
Price: $20.95
NEW
Professional Gemstone Tumbling
By Lortone, 21 pages, B&W - Softcover
This is the same book that comes with all Lortone
ROTARY TUMBLERS. Great for beginners. A stepby-step guide to ROTARY tumbling of gemstones.
DK Smithsonian Handbook of FOSSILS
By Walker and Ward, 320 pages, Color - Softcover
This book uses the “Photo-Encyclopedic” approach for
identification of fossils. A full color illustration, showing
the fossil as a living animal or plant is included. Over
500 fossils covered.
MLS Part #: 907500
Price: $22.00
MLS Part #: 907900
GEODES Natures Treasures
By Zeitner, 304 pages, Full color - Softcover
How to Tumble Polish ROCKS into GEMS
By E. E. Smith, 102 pages, B&W.
A stunning full color exploration of geodes. Written by two of the most
respected authors on rocks, gems, minerals: June Zeitner and Brad
Cross. This extensive look into the fascinating world of geodes from how
they are created, where they are mined to the exquisite variety of crystal
forms within.
MLS Part #: 907250
Price: $4.50
This book without doubt is the finest book on tumbling I have ever read!!!!
Smith covers both rotary and vibratory tumbling. Basically Smith lays the
book out by picking a tumbling topic. He then covers this topic with
vibratory tumbling, then on the next page in covers it on rotary tumbling.
MLS Part #: 907800
Price: $19.95
Price: $20.95
Turquoise Unearthed - An Illustrated Guide
By Lowry, 80 pages, Full Color - Softcover
The definitive resource for turquoise rockhounds and
serious collectors alike. Get the fascinating history of
turquoise mining; see beautiful colors and forms that
make this gemstone like no other.
Modern Rock Tumbling
By Steve Hart, 96 pages, Full Color - Softcover
A new book on tumbling, copyright 2008. Covers both
rotary and vibratory tumbling. Tells of some of the
new techniques being used for tumbling as well as
some of the newest abrasives and polishes.
MLS Part #: 907400
MLS Part #: 908100
Price: $12.95
53
Price: $24.95
NOTE PAGE
“YOUR LAPIDARY
GENERAL STORE”
MLS
54
MLS
MINNESOTA LAPIDARY SUPPLY
MINNESOTA LAPIDARY SUPPLY
2014 - 2015
DATE:
Princeton , MN 55371
Ph: (763) 631-0405 TOLL FREE ORDERS ONLY: (888) 612-3444
Fax: (763) 631-0405
CUSTOMER ORDER FORM
DATE:
NAME:
ADDRESS:
CITY:
PHONE: (
UPS
Parcel Post
STATE:
)
C.O.D.
ZIP:
Money Order
COD
CARD #:
EXP. DATE:
SECURITY CODE
CARD ADDRESS:
Item
Quantity
Ordered
Mail
Priority
Pick-up
CREDIT CARD DATA (If Used):
METHOD OF PAYMENT:
Check
Credit Card
SHIP:
CUSTOMER ID:
MLS
PART
NUMBER
ZIP CODE:
PRODUCT DESCRIPTION
Catalog
List
Price
1
2
3
4
5
6
7
8
9
10
SHIPPING CHARGES INCLUDES INSURANCE:
SUB TOTAL OF ITEMS ORDERED UP TO $49.99 ------------- $13.00 *
SUB TOTAL OF ITEMS ORDERED $50.00 to $199.99 -------- $19.00 *
SUB TOTAL OF ITEMS ORDERED $200.00 to $399.99 ------ $32.00 *
SUB TOTAL OF ITEMS ORDERED $400.00 to $699.99 ------ $50.00 *
SUB TOTAL OF ITEMS ORDERED OVER $700.00 ----------- $65.00 *
*Note: Add $1.00 extra shipping charges for each gallon of blade
lubricant ordered to cover extra cost of shipping. On quantities of 20
pounds or more of abrasives extra shipping will be added.
* EXCEPTIONS: Outside the continental U.S., actual shipping charges
will passed through to customer at no mark-up. Any order that cannot
be shipped via UPS will be shipped by truck carrier, FREIGHT collect.
* SORRY, NO C.O.D.'s to Alaska, Hawaii, Canada and Mexico.
We only accept VISA, MASTERCARD and
DISCOVER CREDIT CARDS!!!
SUB TOTAL OF
ITEMS ORDERED
Less (Minus) Coupons / Specials
SHIPPING CHARGES
(Rate shown or by Office on Phone)
Total of Items Ordered
Minnesota Residents
Add 6.875% Sales Tax
UPS C.O.D. Charges
Add $11.00 (If applicable)
TOTAL
AMOUNT OF
ORDER
TOTAL
COST
“YOUR LAPIDARY
GENERAL STORE”
GENERAL MAP
MLS
Ph/Fax: (763) - 631 - 0405
DETAILED MAP
HOURS
Sun. & Mon. ------- Closed
Tue. thru Fri. ----- 9:00 am to 5:30 pm (CST)
Sat. ------------------ 9:00 am to 4:00 pm (CST)
MLS
Stamp
Princeton, MN 55371
FIR
To:
FIR
LA
ST C
SS
LA
C
T
S
SS

Mls - Minnesota Lapidary Supply

Transcription

Similar documents

PDF Template - Fortus Realty

MetroList Seminar_photography flyer

PDF Template - A Door Properties

Naramata Real Estate Matters 74%

Move-In Ready Homes

Naramata Real Estate Matters 40% Team

Cell tower plan put on hold in Pointe Claire

Naramata Real Estate Matters

Program Overview For NEFMLS

Moldex Residences Baguio - ASPEN Bldg 1 521