View Color Brochure

AUCTION!
On The Premises & Simultaneous Web Cast!
Furniture & Clocks
Holland, MI. Mfg. Facility
1201 Industrial Ave., Holland, MI.
Thursday October 27th 10am
Preview: Wednesday, October, 26th 9am-4pm
PH: 717-854-0316
FX: 717-843-7826
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
On The Premises &
Simultaneous Web Cast!
CNC Routers & Machining Centers
1999
Heian HR-442PF-R4-1616W CNC Router (1999)
1998
CMS Giotto M CNC MachiningCenter w/ ATC (1998)
Heian HR-442PF-R4-1616W CNC Router (1999)
Twin 63” x 63” vacuum tables, (4) 7.5/8.8Kw Router
motors, 17,400 max RPM pneumatic tool release, (4)
piggyback drill motors, 2.2KW, 17,400 RPM, Fanuc
series 18i-m controller with PC, monitor, and keyboard,
Servo drive on all axis, 480V, s/n 9900366H23658,
Dekker Vacuum Technologies Vacuum Pump, 20hp
220/440V, m/n VMX0300KA1-00, s/n AI5662.
CMS Giotto M CNC Machining Center w/ ATC (1998)
Twin 4’x5’ work areas with (4) moveable parts holders
with (3) moveable vacuum pods each, (6) popup positioners on each table, CMS OSAI numerical controller
with keyboard, (1) main router 8KW 18,000 RPM with C
axis, (8) position ride along carousel tool changer, (10)
vertical boring heads along Y axis, (10) vertical boring
heads along X axis, (2) horizontal boring heads along Y
(-) axis, (2) horizontal boring heads along Y(+) axis, (2)
horizontal boring heads along X(-) axis, (2) horizontal
boring heads along X(+) axis, 1.8KW boring motor for Y
axis, 1.8KW boring motor for X axis, (2) Siemens 4.4KW
vacuum pumps, s/n 1952
CNC Panel Saw
CMS Giotto M CNC Machining Center Close Ups
2000
Schelling FM-H 330/310 Rear Loading (2000)
Schelling FM-H 330/310 Rear Loading (2000)
10.6’W x 10.2’L x 3.15”H Max Cutting Capacity, 37.4”
Working Table Height, 3.75” Max Saw Blade Projection,
Main Saw 20HP, 370mm Max Main Saw Blade, Score
Saw 3.4HP, 20mm max score saw blade, Saw Carriage
1.4Hp AC Servo drive, 1-393 FPM Forward, 393 fpm
reverse, Cross Aligning 2.75” – 86”, Allen Bradley IBM
PC w/ Keyboard & mouse, (3) 23” x 83” Air flotation
tables (1 fixed – 2 moveable), (8) Grippers w/ 3 .15”
Opening spaced: 2.56” / 10.43” / 18.31” /30.12” / 41.93”
/ 53.74” / 77.36” / 112.8”, Grandeur Powered infeed case
roll section 57”W x 165”L (11) 5” dia. Powered Rolls,
Grandeur Powered outfeed case roll section 57”W x
165”L (11) 5” dia. Powered Rolls Powered Hydraulic
Scissor Lift Section 9,900# Capacity 5.4HP 63”W x
122”L 32” Max Stack Height (7) 4” dia. Powered Rolls,
220/400 Volt 86/48 amp, 25KW Total, s/n 202.406
www.irsAuctions.com
Schelling FM-H 330/310 Rear Loading Alternate Views
1
www.irsAuctions.com 717.854.0316
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Late Model Sanders!
Wide Belt Sanders / Denibbers
2000
Costa 53TR CTT 1350 Wide Belt w/ Sensing (2000)
Costa 53TR CTT 1350 Wide Belt w/ Sensing (2000)
53 ½” wide vacuum belt, 12” load space, sensing wheels
prior to crossbelt, 1st Crossbelt – 20KW 150mm x
7350mm belt, 2nd Contact Drum 18.5KW 1380mm x
3250mm belt, 3rd Platten 14KW 1380mm x 3250mm
belt, 4th Platten 14KW 1380mm x 3250mm belt, control
console with monitor and keyboard, 12.5KW vacuum
bed motor, min/max working thickness 3-160mm, working table height 900mm, feed motor power 4, 6KW, feed
speed 3-30 m/min, thickness setting motor power 0,
63KW, 480V, total amps 146, total KW 77, s/n 991103
AC1.
Costa Top & Bottom Wide Belt Sanding Line (1996)
Bottom head machine, 47” wide vacuum belt, 26” load
space, Constant pass line, 1st Contact 30KW, 2nd
Contact 22KW, 3rd Contact 15KW, 7.5/8.6KW vari-drive
motor, 5.5/6.4 KW vacuum blower motor, top head
machine, 47” wide vacuum belt, 1st Contact 30KW, 2nd
Contact 22KW, 3rd Contact 15KW, 7.5/8.6KW vari-drive
motor, 5.5/6.4 KW vacuum blower motor, control console
with amp gauge on each head, 440V, 263Amp, 250hp
total, s/n 960423AC1.
1996
Costa Top & Bottom Wide Belt Sanding Line (1996)
2001
Opti-Sand R-52-V Rotary Denibbing Sander
Don’t Wait, Set Up Your
Web Cast Account Today!
Opti-Sand R-52-V Rotary Denibbing Sander (2001)
52” width capacity, the Opti-Sand R-52-V has 4 sanding
spindles, (2) spindles are 64” long each with a 5hp motor
and (2) spindles are 48” long each with a 3hp motor. (2)
spindles rotate clockwise and (2) spindles rotate counterclockwise. The spindle speed is variable from 501,000 RPM by means of a frequency inverter. All of the
spindles are placed on one main head, or plate, that also
rotates. The head rotation adjusts from 5-25 RPM by frequency inverter. There is motorized push button
up/down adjustment of the sanding heads and digital
readout for sanding height. The R-52-V to be setup for
460V, 3-Phase, 60Hz power. The Opti-Sand R-52-V is
equipped with a variable vacuum hold-down system with
(2) 10hp motors. The vacuum system is built into the
base of the machine. With sound insulation material surrounding the vacuum pumps to reduce the operating
noise level. The conveyor belt speed adjusts from 5-50
FPM by a 3hp gear motor and frequency inverter. Net
weight 6,800 lbs, 42hp, HYTROL powered roller conveyor, m/n 190-SP, 37” wide x 36’, rubber coated 2”
diameter rollers.
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
2
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Rough Mill Line
Automated Lumber Handling Hydraulic Tilt Hoist
14’ Capacity, (4) Arms 48” x 54”, Spaced 48” o.c., 20 HP 220/440V
Hydraulic pump motor
Automated Lumber Handling Chain Deck
11’ Wide, (6) Chains, Spacing of Chains: 24”, 36”, 24”, 24” & 24”, 2 HP
220/440V motor
Newman Powered Belt Conveyor
30”W x 24’L, Hydraulic operated
Late!
Auto. Lumber Hand. Hyd. Tilt Hoist
Coe Moisture Meter Moisture Detector
MR30 multi sensor LMD, s/n 58318
Newman S-382 HD Double-Sided Planer
30” Width Capacity, 6” Thickness Capacity, Newman Helical Carbide
Cutter Heads, Bottom Head 40HP 220/440V, Top Head 75 HP 220/440V,
25 HP 220/440V Hydraulic Pump Motor, Pneumatic Chip Breakers, (15)
Pneumatic Drive Tires, s/n 13910
Newman S-382 HD Dbl. Sided Planer
Automated Lumber Handling Flat Top Chain Deck
150”W x 21’L, (6) Chains, Spacing: 20”, 18”, 36”, 34” & 38”, 3 HP 220/440V
motor
BarrMullin Optimizer Fence
(used w/ M J Gang Rip) 2 Lasers Moving
147”W x 90”L Infeed Chain Deck, (6) Chains Spaced: 20”, 18”, 36”, 34”,
38”, 18’L Moving Fence, (12) Canted Powered Case Rolls 40” x 4.5”D, 2
HP 220/440V motor, Control Panel w/ (2) Monitors & Keyboard, (2) Moving
Laser Lights
Late!
Mereen Johnson 424-DC/SR (1993)
Mereen Johnson 424-DC/SR (1993)
24” Width Capacity, 26”W Rubberized Track, Select-A-Rip Moveable
Blade, Bijur Mist Lubricating System, 3HP 220/440V Vari-Drive motor,
Automated Lumber Handling Powered Belt Conveyor, 30”W x 120”L 2 HP
220/440V, (2) 30” x 9” Pinch Rollers, s/n MJ-4599
(2) Automated Lumber Handling Steps Over Line
Automated Lumber Hand. Flat Roof Top Chain Deck
12’W x 24’L, 6-chains spaced: 24”, 48”, 24”,24”, 24”, 5 HP 220/440V
2001
Ultimizer 800B-100 Opti.Cut-off (2001)
Late!
Ultimizer 800B-100 Optimizing Cut-off Saw (2001)
Left-hand orientation, 42” saw passline, 20” blade, ICD width scanner, control console with monitor and keyboard, 7 ¾” wide belt conveyor, 7” x 4”
cutting capacity (approx.), 8” wide x 16’ long double-sided marking station,
9” wide x 40’ long powered belt conveyor, 7 pneumatic kickers, end scrap
discharge, s/n 800B-181
Late!
Late!
Automated Lumber Handling Flat Roof Top Chain Deck
3
Coe Moisture Detector
www.irsAuctions.com 717.854.0316
Barr Mullin Opti. Fence
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Moulders
2000
Weinig Profimat 23 E 5-Head Moulder (2000)
1998
2000
Diehl 5006 Moulder (1998)
Weinig Profimat 23 E
1998
Diehl 5006 6-Head Through-Feed Moulder (1998)
Weinig Profimat 23 E 5-Head Moulder (2000)
.787” – 9.055” width capacity, .315” – 4.725” height
capacity, 1st Bottom 7.5 KW 220/440V 6000 RPM, 2nd
Right 7.5 KW 220/440V 6000 RPM, 3rd Left shared
motor with 2nd head, 4th Top 11 KW 220/440V 6000
RPM, 5th Bottom 220/440V 7.5 KW 6000 RPM, Cardan
drive, 3 KW feed motor 16-78 FPM, manual digital readouts – all heads, power height adjustment, 460V, s/n
89695, Ziwo feeder, m/n CL11, 440 V, s/n 87-0898
Diehl 5006 6-Head Through Feed Moulder (1998)
Width capacity 9.25”, thickness capacity 4.75”, speed
range 18-110 f.p.m., jointer table cut .4”, right guide
movement .4”, Cardan drive, 10 hp 220/440V feed
motor, outboard bearings on horizontals (except 1st bottom), 1st Bottom 15 hp 220/440V 1 13/16” spindle, 2nd
Right 15 hp 220/440V 1 13/16” spindle, 3rd Left 15 hp
220/440V 1 13/16” spindle, 4th Top 20 hp 220/440V 1
13/16” spindle, 5th Top 20 hp 220/440V 1 13/16” spindle,
6th Bottom 15 hp 220/440V 1 13/16” spindle, Manual
digital controls all heads, grooved and solid beds, accurate digital proscale, pneumatic door open and close,
460 V, s/n 98M-6415-5831, Z drive 110 hopper feeder,
s/n 110-0064
Wadkin XE 416 6-Head Through-Feed Moulder
230mm x 130 mm capacity, 1st Bottom 10 hp 220/440V
1 13/16” spindle, 2nd Right 15 hp 220/480V 1 13/16”
spindle, 3rd Left15 hp 220/440V 1 13/16” spindle, 4th
Top 20 hp 220/480V 1 13/16” spindle, 5th 15 hp
220/440V 1 13/16” spindle, 6th Bottom 15 hp 220/480V
1 13/16” spindle, Cardan drive, 15 hp 220/440V Varidrive
feed motor, 10 to 50 m.p.m., outboard bearings, manual
digital readouts on each head, power raise and lower
motor 1.5 hp 220/440V, 440V, s/n 93129, Z-drive 110
hopper feeder, s/n 110-050.
(5) Moulder Return Conveyors
1 Metzgar, 4 custom
Wadkin XE 416 6-Head Through-Feed Moulder
Diehl Vonnegut 4-Head Moulder
Hopper feed, 7” x 4” capacity (approx), 1st Top – 10hp
220/440V, 2nd Left – 5hp 220/440V, 3rd Right – 5hp
220/440V, 4th Bottom – 10hp 220/440V, (2) 8” long corrugated feed rolls, 3hp feed motor 220/440V, s/n D6466
Moulding Heads
Approximately 50, used with the above listed moulders.
Diehl Vonnegut 4-Head
Lg. Qty. of Moulder Heads
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
4
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Set Up Your Webcast Account Today @ www.irsAuctions.com
Low Speed Grinders / Hogs
Cresswood LR30DST Destroyer Horiz. Low Speed (2000)
75hp main motor 220/440V, 3hp varidrive motor, 30” wide x 18’
long vibratory conveyor, complete sound enclosure, s/n 1100200
Cresswood EF-24-40 Destroyer Horiz. Low Speed (1997)
24"W Infeed, 40hp 220/440V Main Motor, 1 HP 220/440V Motor,
vibrating infeed conveyor 23”W x 13’L, s/n1330897
Williams 17545 Hammer Hog
50hp 220/440V w/transfer fan
2000
Cresswood LR30DST Horiz. Low Speed Grinder
1997
Cresswood EF-24-40 Low Speed Horiz. Grinder
2000
Radio Frequency Services Hi Freq. Gluer (2000)
High Frequency Gluers
Radio Frequency Services High Freq. Gluer (2000)
m/n RFSN30505A0500PC, clamping area is 50” x 100” x 10”
thick, clamping pressure is applied by hydraulic cylinders and
pusher shoes, pressure is capable of exerting 200 psi over full
length of 10” thick load, edge pressure (100”) applied by thirtytwo (32) each 2” bore x 4” stroke hydraulic cylinders, supplied by
a common manifold for uniform pressure across the full length of
the panel, 15 hp hydraulic pump unit equipped with a 50 gallon
tank, top pressure applied by four (4) each 2” bore x 18” stroke
hydraulic cylinders (two rows), 30KW internal solid state RFS RF
Generator can cure approximately 3000 sq. in. of glue line area
per minute, wired for 480V 60 Cycle 3-Phase operation, 120V AC
controls, Auto Cure: feature utilizes the PLC in the press to determine when the glue lines are completely cured then stops the
press regardless of the timer setting, the press will still feature the
standard timer which can be enabled by a switch, 54”x102” shuttle table, 1hp 220/440V motor, 53”x100” outfeed table
Slat Conveyor Glue Spreader
17 ¾” width capacity, 21” x 8’ infeed slat conveyor, 21” x 8’ outfeed slat conveyor, 1 hp single phase motor
L&L Du-All DA50 High Frequency Gluer
50” x 100” capacity, (11) pneumatic top pressure cylinder, (6)
pneumatic side pressure cylinder, (2) pneumatic open & close
cylinder, 440V 45 amp, s/n 87-793
Workrite 4000 Wood Welder
Late!
On The Premises Auction
& Simultaneous Web Cast!
This is a Landmark Sale, Mark Your
Calendar & Plan to Attend Now!
L&L Du-All DA50 High Frequency Gluer
5
www.irsAuctions.com 717.854.0316
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Combination Dowel Equipment
www.irsAuctions.com
Koch Sprint-PTP-L CNC Boring and Dowel Machine (2001)
92” length capacity (2 zone), 17 ½” x 92” work table, control consolel with PC, monitor, and keyboard, (8) moveable pneumatic
hold-downs, .9 KW boring motor, 480V, 9.5A, 3-Phase, s/n
A0103/6560
Koch CNC Sprint-PTP Bore & Dowel Insert Machine (2000)
49” working capacity, 17 ¾” x 49” table – 2 zone, .9Kw boring
motor, (8) moving, pneumatic hold downs, control panel with PC,
monitor, and keyboard, 480V 4Kw total, s/n A0004/6338
Accu Systems DS1 Dowel Inserter Gun with Hopper
s/n 96HC1173
2001
Koch Sprint - PTP - L CNC Boring & Dowel (2001)
Wide Belt Sanders
Timesaver 337-200B Orbital Cross Belt
2-Head Sander 36 ½” wide belt, 32” load space, 6” wide crossbelts, 1.5 hp 220/440V each head, power raise and lower, 3hp
varidrive motor, s/n 19126
Timesaver 337-3 AHB
3-Head Denibber 37” wide belt, 3 denibbing heads on an angle,
1st Head - 3hp 220/440V, 2nd Head – 3hp 220/480V, 3rd Head
– 3hp 220/440V, frequency inverts on all heads, 3hp varidrive
motor, s/n 19127
Timesaver 325-2
2-Head Wide Belt Sander 25” width capacity, 19” load space, 1st
Head – contact drum 30 hp 220/440V, 2nd Head – Platen 2.5hp
220/440V, 2hp 220/440V varidrive motor.
2000
Koch CNC Sprint - PTP Bore & Dowel (2000)
Timesaver 125-1HD
Top Head Wide Belt Sander 25” width capacity, 22” load space,
single combo head, 15hp main motor 220/440V, 1hp varidrive
motor 220/440V, load motor, s/n 19438Y
Timesaver 125-1 HDB
Bottom Head Wide Belt Sander 25” width capacity, 48” load
space, single combo head, 20hp 220/440V main motor, 1.5hp
varidrive motor, load meter, s/n 21939
Timesaver 337-200B & Orbital Belt 337-3 AHB
Late!
Timesaver 337-200B Orbital
Timesaver Denibber
Timesaver Top & Bot. Line
Accu Sys. DS1 Dowel Gun
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
6
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Dovetail Equipment
www.irsAuctions.com
Dodds SE-25CNC Single End Dovetailer (1999)
25 spindles, 10hp, 12,000 RPM, spindle lubrication: auto, oil
mist, digital readouts for front and backside stops, drawer
height: 1 ¾” – 25”, top to bottom, drawer width: 8” – 48”, drawer depth: 7” minimum front to back, material thickness: 3/8” –
3/4” sides, 7/16” 1-3/4” fronts/backs, 220V, 3-Phase, 60 cycle,
41 amp, 440V, 3-Phase, 60 cycle, 32 amp, s/n D99031-168.
1999
(2) Dodds C-36 Dovetail Drawer Clamp
42” opening, pneumatic traverse, 26 ½” high jaws, s/n C8974255,s/n n/a
Dodds GP Dovetail Gluer
s/n 91027-305
Dodds SE-25CNC Single End Dovetailer (1999)
Double End Tenoner
Celaschi TSA-400C Double End Tenoner
113” max opening (approx.), 1st Post – Universal tilting score
1.5hp/2.5 hp 600V 3600/7200 RPM, 2nd Post Front side - tilting universal, 5.8KW, 220/380V, 3000/6000 RPM, 2nd Post
Back side – universal jump, 5.5/8hp, 340/600V, 3600/7200
RPM, 3rd Post Front side – 5.5/8hp 340/600V, 3600/7200
RPM, 3rd Post Back side – universal tilting, 5.5/8hp,
340/600V, 3600/7200 RPM, power traverse, 3” wide rubberized track, pop up dogs 15 ¾” on center, Caterpillar style
upper hold-down belts, Carter laser alignment light, 50 KVA
frequency converter, s/n 3307
Late!
Double Sided Planer Line
Celaschi TSA-400C Double End Tenoner
Timesaver 337-1K Planer (1997)
Gladu replaceable cutter spiral carbide head, 36” Width
Capacity, 24” Load Space, 40hp 220/440V Main Motor, 10 HP
220/440V Hydraulic Pump Motor, Powered Open & Close,
Amp Meter, Accurate Pro-Scale, hyd. feed, s/n 25719
Whitney S-600 Facer
36" Width Capacity, 15 HP 220/440V Main Motor, 1.5 HP
power open / close motor, Rubberized upper track, carbide
cutter head, s/n 17967
Metzgar Powered Belt Conveyor In between conveyor, 36”w
x 10’L, ½ HP 220/440V, Allen Bradley PLC controller
Timesaver Planer (1997) & Whitney Facer
Qty. 2
1997
Whitney S-600 Facer
7
Timesaver 337-1K (1997)
Timesaver 337-1K Planer Hd.
www.irsAuctions.com 717.854.0316
Dodds C-36 Dovetail Clamp
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Stile Bore & Sander
1996
Profilamatic Stile Bore w/ Sanding
Profilamatic Sanding Stile Bore & Sander
Four 2hp drill units three spindle heads, drill distance 7/8”, 2-5/8”, 3.5” on
center, pneumatic movement on individual THK ways system, independent
control of each unit, four 2hp belt sanding units, two units designed as drum
sander, two units designed as shoe sander, belt size 2.000” width x 109.5
long, automatic tracking system, dust hood and guards, belt feed through
system, holddowns and pressure systems, 4.000” wide Linatex conveyor
belt, .25hp DC variable speed drive up to 45 feet per minute, (7) accurate
pro-scale digital readouts,
Cleat Block Machine
Nichols Cleat Block Machine
3” to 18” cleat length, ¾” x ¾” stock, (2) 1hp 220/440V Boring motors with
3 adjustable boring heads on each side, 1.5hp 230/460V cutoff saw, 8” saw
blade capacity, 2 pneumatic hold downs, pneumatic boring movement, hopper feeder, pneumatic infeed pusher, pneumatic saw movement, digital
readout, average production is 20 blocks per minute.
Late!
Grinding Room
Nichols Cleat Block Machine
Weinig Rondamat 931 Profile Grinder
Grinding wheel diameter max 8 - 55/64”, Grinding wheel width 13/64”,
Grinding wheel bore 2-23/64”, Maximum tool diameter 11-51/64”, Minimum
tool diameter 3-59/64”, Maximum tool width 9-3/64”, Grinding wheel drive
1.5hp, rotation 1420 RPM, Coolant pump drive 0.28kW, Coolant tank capacity approx. 26.5 gallons, s/n 931-314.
Stehle PSM Profile Grinder
2.2 KW, 220V 3-phase, 10” capacity, digital RPM gauge, s/n 3796189
Weinig Rondamat 931 Profile Grinder
Wadkin Optical Moulding Head Setup Reader
Opticass optical computer-aided setting system, 14” capacity
Case Clamps
Hess Laura LA000086/003 Case Clamp (2000)
50 ½” high x 97 ½” long capacity, (6) horizontal pneumatic clamps, (4) vertical pneumatic clamps, 220V 75Kw power with Open/Close motor, s/n
LA0000861003
2000
Hess Laura Case Clamp (2000)
Hess Case Clamp
53”high x 98” long capacity, (8) vertical pneumatic clamps, (6) horizontal
pneumatic clamps, .55Kw 220V power raise/lower motor, s/n
100712/101989
On The Premises Auction
& Simultaneous Web Cast!
This is a Landmark Sale,
Mark Your Calendar
Plan to Attend Now!
www.irsAuctions.com
Stehle PSM Profile Grinder
Hess Case Clamp
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
8
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Frame Clamps
Qty. 5
Lancaster 1861-B & 1410-B Frame Clamps
(3) Lancaster 1410-B-275 Easel Clamps
2 pneu. cyl., 93” x 62” cap., (High Jaws) 55”x84” cap., 46”x84”
cap. s/n 1410-B-275,1410-B-393, 1410-B-186
(2) Lancaster 1861-B-211 Frame Clamps
46”x84” cap., (2) pneu. pressure cyl. s/n 1861-B-211, 1861-73
Lancaster 1200-B-409 End Clamp Pneu..
(2) Handy 967 Frame Clamp
3 pneu. cyl., s/n M6XC967, E1XB967
Forklifts
Overview of Forklifts
Late!
Late!
Nissan 35 Forklift
Nissan 30 Forklift
Late!
Nissan 35 CPJ01A18V Forklift
3,500lb. cap. LP gas, sideshift, 2852 hours, s/n CPJ010-9N1600
Nissan 30 N0115V Forklift
3,000 lb. cap. Elect., sideshift, 2900 lb. lift cap., 169” lifting ht.,
3447 hrs., s/n N01-700595
Kalmar ACC100RC LP Forklift
6,500 cap. LP gas, 171” lift ht., dual front tires, 2214 hrs., s/n
650024
Yale Type E Forklift
2,000# cap., elect., 1059 hours, s/n 162G
Crown Lift & Ride TWR3540-280
24V, 34” x 25” lift platform, s/n 6A201265
Crown RC3000 Stand-Up Forklift
Elect., sideshift, 2750# lift cap.,190” lift ht.,1563 hours, s/n
1A200607
Crown Electric Walk Behind, 2000 lb. cap., s/n 1A208229
Schaeff E-2000B Stand-Up Forklift
Elect., 8275 hrs., s/n 10268710
Big Joe Walk Behind Electric Forklift
2000# Cap., Built-in Charger, s/n 346393
Walk Behind Electric Forklifts
Crown 2000#, m/n W21-90-S, s/n L-6386-2, Crown 2000# s/n
1A231439, Prime Mover 2000# m/n SN-20, s/n 1555, Crown
2000# s/n 1A208229, Crown 1500# m/n WT-90-S, s/n L-6180,
Prime Mover 4500# m/n PMX2, s/n PMX2 237359, Crown
2000# s/n 1A1011294
Factory Cart FC1001 floor cleaner, s/n 34-11320
Finishing Lines
Kalmar LP Forklift
Crown Stand-Up Forklift
2001
Giardina G95/08 2-head roll coat line w/oven
9
Giardina G95/08 2-head roll coat line w/oven (2001)
Machine width 1,350mm, 1,320mm working width, loading belt
conveyor 55” wide x 75” long, .5HP, roll coat machine, .75HP, Jethot air drying tunnel, equipped with 3 infra-red twin courts lamps,
9.75KW each, suitable for application of UV high and medium
viscosity putties & waterbase, s/n 1151/2 More info available
upon request.
Finishing Line
(12) Spray Booths, 11', 8’deep x 10’ high x 10’ wide, pneumatic
sliding doors, (2) explosion-proof lights, Drying Tunnel, (6)
Flammable Cabinets, (16) Pressure Spray Pots, Red Devil Paint
Shaker s/n F13167
www.irsAuctions.com 717.854.0316
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
On The Premises & Simultaneous
Web Cast!
Qty. 5
(5) Great Dane 48'Trailers
2000
Rolling Stock
Stoughton Van Trailer 53’ (2000)
Vin# IDW1A53231B483186
(5) Great Dane 48'Trailers
65,000lbs,Vin# 1GRFA9624DB113714,
1GRFA9620DB113709, 1GRFA962CDB113703,
1GRFA9625EF049801 & 1GRFA9629FB049803
Ford L9000 Semi Tractor
422,621, sgl. axle, VIN #1FDYR90L5HVA47414
Ford Club Wagon E-350 Van
15 passenger, 77,000 miles, V-8 engine, AC/Rear AC / PW
/ PL/ TW/ AM-FMCass. / CC, vin# 1FBSS31L5WHB25619
Cushman Electric Car Minute Miser s/n 95003932
Dust Collection
Ford L9000 Semi Tractor
Ford E-350 Van
Dust Star 12-456-704 Dust Collector (1990)
IAP 542 EHD B ARR 1 transfer fan, approx. 65,000 cfm @
14" sp, 250hp, 460v, 40hp aux. transfer fan, 12' bags, 456
Stoughton Trailer 53’ (2000) bags, s/n IAP #901082, Rotary Air Lock, s/n 90-36012-1,
order #1290 36012
Pneumafil 13.5 Dust Collector
250hp 460V Main Transfer Fan, 20 HP 220/440V Auxiliary
Transfer Fan, (2)Rotary Air Lock, s/n 31149-2
American Air filters Dust Collector
size 1-306, 125hp transfer fan, 25hp transfer fan (to bin), 4
rotary air locks, s/n AT240025
Wheelabrator Dust Collector s/n A180543
150hp 460V main transfer fan, 20 HP 220/440V auxiliary
1152 Bags 10’long, s/n A180543
American Air Filters Dust Collector
Dust Star Collector (1990) size 1-306, 125hp transfer fan, 25hp transfer fan (to bin), 4
rotary air locks, s/n AT240025
Grecon Spark Detection Extinguishing Sys. (1998)
m/n CC704, 12-zone, s/n 2466
Amer. Air Filters Collector
Presses
Black Bros. Cold Press
38” x 102 ½” work area, (4) independent platens, 25 ½” 38”
each, adjustable daylight opening to 26”, popup infeed/outfeed rollers, 60 minute timers on each platen, s/n 172623
Evans 0256 62" Wide Pinch Roller
115V, s/n 565212
Black Bros. Cold Press
Pneumafil 13.5 Collector
Saws Cut Off & Miter
Omga V235 Double Miter Saw (2000)
14” blades, 5” x 99” table, pneu. stop, 3.6Kw 460V, s/n 2-921
Whirlwind 212L Chop Saw (2000)
10HP, 3 phase, 230/460 volt motor, (1) 18” diameter cut-off
blade, 2” x 12” capacity, foot pedal actuation, s/n 6580548L
Pistorius C Miter Chopper, s/n 75489
2000
2000
Whirlwind 212L Saw
Omga Double Miter Saw
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
10
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
On The Premises &
Simultaneous Web Cast!
Straight Line Rip Saw
Diehl 750 Straight Line Rip Saw, 24” throat, 80” x 63” table, 15
hp 220/440V main motor, variable feed 60 to 180 f.p.m., short
stop electronic motor break, straightening fence, s/n 62-2765
Resaws
Hitachi CB100F Band Re-Saw w/ Feeder, 25 ½” x 3 ½” wheels,
10hp 220/440V main motor, 29” x 32” tilting table, 16” underguide,
Tyler power belt feed deck 10A 115V 5” wide belt, s/n 845011
Cut Off Saws
Copco 47A20 Hydracut, 5 HP (approx) s/n 860025
Bandsaws
Diehl 750 Straight Line Rip Saw
Tannewitz GH 36”, 5hp 220/440V, s/n 14896
Tannewitz RHE 42", 7.5hp 220/440V, 36”x37” table, s/n 76060
Oliver 116 36” 5hp, 440V, s/n 32704
Powermatic 81 20”, 20" cap., 3-phase, s/n 8381045
(4) Delta 28-245 14", ½hp, 115V, s/n 90E35875, 89651045, 86B00943, 83K05343
General 490 15”, s/n V4660 1/2hp, 115V, s/n
Astro WB8-14 14", 115V, s/n 86017755
Table Saws
Powermatic 81 20”
Tannewitz GH 36”
Qty. 4
(4) Delta 28-245 14"
Hitachi Resaw
Qty. 5
Tannewitz U Table Saw, 5hp 3500 RPM 220/440V, 14 amp total,
s/n 12348
Tannewitz XJ Table Saw with Feeder, 5hp 220/440V, 14 amp
total, 3,600 RPM, 4-roll HOLZ feeder, s/n 11162
(3)Tannewitz J Table Saw, 5hp 220/440V (approx.), s/n 3756,
2892
(4) Delta 34-806 Unisaw, 5hp 220/440V, s/n 88F38435, s/n 426275, 89D18940
Darra James Table Saw with Feeder, 2hp 220/440V, Nandina 3Roll feeder
Wards 64TDW227 Table Saw, Approx. 2hp 220/440V, s/n 912SC
Boring Machines
Ritter R-813 Horizontal Borer (1995), 13-spindles, 2" centers,
3hp 220/440V, (3) pneumatic hold-downs, foot pedal, 36”x12”
table
Tannewitz XJ Table Saw
Tannewitz U Table Saw
Drill Presses
Root GM Borer, 2hp 3,600/1,800 RPM, 460V s/n 8154
Oliver 72D Drill Press, 2hp 220/440V, s/n 36101
Oliver 72-D Drill Press, 2hp 440V, s/n 95492
Delta Rockwell 15-665 15” Drill Press
3/4hp Single-phase, pneumatic drill movement, s/n 1491609
Qty. 4
Routers
(4) Delta Unisaws
11
Ritter R-813 Hor. Borer
Onsrud A-1124 Pin Router, s/n 9182
www.irsAuctions.com 717.854.0316
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Edge Sanders
On The Premises
& Simultaneous (2) Oakley H-5, Oscillating, (2) 9” x 52” platens, s/n 490133. 73-1/2" x 11" platen,
s/n 4473R
Web Cast!
(2)Oakley H648, Oscillating, (2) 9” x 49” platens, 7.5hp 220/440V, s/n 3637, 3852
Oakley H6 Oscillating, (2) 37”x7” platens, 5hp 220/440V, s/n 3363
Ekstrom Carlson 112, Oscillating, 9” x 58” platen, 5hp 220/440V, s/n 112/329
Wysong & Miles, Oscillating, two sided, 5hp 220/480V, 9” x 37” platens
Crouch 60, 8” x 60” platen, 5hp 220/440V, s/n 081789
(2) Powematic 013, 6-3/4” x 33-3/4” platen, 1-1/2”hp 115/230V
Indiana, 10.5” x 42.5” platen, 5hp 220/440V
Drawer Sanders
Qty. 2
Oakley H-5 Edgesander
Oakley H-15, 14” wide belt, 5hp 220/440V motor, s/n 3107
(4) Peerless, 3hp 220/440V, 14” wide belt, s/n 6470
Sanders Misc.
State B4 Spindle Sander, 115V,
Pearson Spl. Sand. Tilting, 1hp 220/440V, s/n 298A
Wysong & Miles Spindle Sander, 3/4hp 220/440V
(3) Delta 31-730 Belt & Disc Sander, 115V
Qty. 2 Jet JSG-6DC Belt/Disc Sander, 1-1/2hp, 115/230V,
Craftsman 113.225930 Belt/Disc Sander, 3/4hp, 115V
Oakley H-5 Edgesander
(4) Powermatic 33 Vert. Belt Sander, 115V, 6” wide belt
(2) Delta Vert. Belt Sander, 6” belt, 115V,
Enco 163-4900 Vert. Belt Sander, 6” x 9” belt & disk
(3) Delta 31-125, 12” Disc Sander, 1hp, 115/230V
Porter Cable BG8 Vert. Belt Sander, 5hp 220/440V,
9” wide belt, s/n 6076 3/4hp, 115V, s/n 100-7280
Planer & Jointers
Crouch Edgesander
Powermatic 100 Planer, 12” width capacity, 5” thick cap.
, 3hp 220/440V, s/n 8410221
Delta 8" Jointer, 3-Phase
Porter 6” Jointer, 1hp, 220/440V
(2) Boice Crane 6" Jointer, 115V, 3/4hp
Shapers
Qty. 2
Oakley H648 Edgesander
Baxter Whitney 139 Double, 30” centers, (2) 5hp 220/440V, s/n 12894, Delta
Shaper, Feeder, s/n HC870
Porter 203 Shaper w/ Feeder, 5hp 220/440V, 3,600 RPM, 3-Roll feeder, s/n 2309
Qty. 3
Ekstrom Carlson Edgesander
Oakley H-15 Drawer Sander
Delta Belt & Disc Sanders
Powermatic 100 Planer
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
12
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Manipulators
Strongarm / J&J Manufacturing Case Manipulator, 3 HP
220/440V Rotation motor, 3 HP 220/440V Lift motor, 24” x 40”
Jaws, 15” – 97” Opening, (2) Pneumatic Cylinders, s/n 001642
Feeder/Stacker Pneu. Vacuum Lift, (8) Vacuum pods
Manipulator w/Scissor Lift, 2000 lb. cap.
Pallet Jacks
Strongarm
Manipulator
(11) H. Kallesoe KG1000 Airlift Pallet Jacks,1000kg max.,
(11) Ergolift Electric Pallet jacks, (25) Manual Hyd. Pallet Jacks
Air Compressors & Dryers
SP Industries Bailer
(3) Compair Kellogg 218 Hydrovane compressors, 50hp each,
s/n 2HV59/309, n/a & n/a
Zeks 400H8FA400 Compressed Air Dryer, s/n 190780
Air Compressor 340-33, 10hp, 230/460V, s/n 142876-L
Pioneer R40A Air Dryer, 115V, s/n 61923E5A17
Compair Kellogg Compressed Air Dryer, s/n 190780
Speedy Foam System Posizorb Oil/Water Separator
Large Air Tank
Pallet Racking
Pallet Racking, (55) sections
1000+ Stackable Racks, 36” x 48” x 10” (majority)
Qty. 11
Package Equipment
(11) Ergolift Electric Pallet jacks
Thermolok Packaging Systems Strapper, 39.5” x 42.25”
Banding Area, ½” Banding, 480V, s/n0000140
Speedy Packers SP3-6251 Foam Packing System (2000)
Viking Industries Titan Hot Melt Gluer
Bailer
Qty. 11
(11) H. Kallesoe KG1000 Airlift Pallet Jacks
SP Ind. VB-72-HD Bailer, 6' cap., wired 480V, s/n 92070276
Huge Quantity of Scissor Lifts
Qty. 3
(22) Southworth X-Lift, 2000 lb., (1) Southworth 4,000 Lb. XLift, (4) American 2000 lb., X-Lift,
Maintenance Lift
Compair 218 Compressors
Zeks Air Dyer
MEC 2033ES Maintenance Scissor Lift, 50# Capacity (2 persons), 32”x90” platform, 30”x32” platform extension, on-board
charger
Qty. 22
Compair Air Dryer
13
Sample Views of (22) Southworth X-Lifts
www.irsAuctions.com 717.854.0316
1999
MEC 2033ES Maintenance X- Lift
Slligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Maintenance
Wilton 3300 Horizontal Metal Bandsaw, 1/3 hp single phase, s/n 864063,
Abrasive Cut-off Saw, 5hp 220/440V 16” cutting wheel
Atlas 4804 Metal Lathe, 36” between centers, 12” swing, 3/4 hp, s/n 150135,
Bridgeport 96084 Vertical Milling Machine, 1hp 220/440V, s/n J-93453,
12 Ton Hydraulic Press, Resolve Industries Parts Washer, Delta 20” Drill Press,
70-200, 1hp, 115/230V, s/n R9504, Hobart Handler 120 MIG Welder, Miller
Thunderbolt Welder, Wilton Metal Band Saw, 1/2hp, 1ph, Rigid 300 Pipe Threading
Machine, Miller Blue Star 2-E Arc Welder, Gas powered engine, Wilton Horiz. Metal
Bandsaw, 1/2hp, 115/230V, m/n 3230, s/n 877091
Bridgeport Vertical Mill
Misc. Support Equipment
Porter carver/sander, Ritter Shape master Jig, (8) Airflow Systems F70 Air
Cleaners, DTI 5000 Hopper Feed Screw Driver, (2) Delta 34-080 10” Miter Saw,
120V, s/n K8929, s/n 9124, Factory Cat Floor Sweeper, 12V DC System, Charger, 238
Hours, s/n 34-11320, Self Dumping Hoppers, (5) Jesco self dumping hoppers,
Plastic Dump Hoppers, (25+ available), Cecor metal bins (27+ available) (3) Hytrol
Power (26) roller Sections.
Rigid 300 Pipe Threader
General Miscellaneous
Miscelleneous: Dandy scissor lift, dock lights, staple guns, nail guns, clamps (bar, pipe
& spring), hammers, disc sanders, screw guns, air hose, squares, air blow offs, wrenches, wood clamps, belt sanders, parts bins, fans, trash cans vertical inspection lights, staQty. 5 ples, (4) clamp tables, ultra max sprayer, etc.
Jesco Self Dump Hoppers (50) Lineberry factory carts.
Real Estate Available by Private Negotiation!
Real Estate
Prime Real Estate in Holland, MI.
Building has beautiful offices. It has
large manufacturing and warehousing areas. There is plenty of dock
door access and it is located close to
major interstates.
Total Sq. Ft.: 224,200
Mfg. & Warehouse Sq. Ft. 213,200
Office Sq. Ft. 11,000
Address: 1201 Industrial Ave.,
Holland MI. 49423, Allegan County,
Acreage: 19.72
Proximity: US 31 1 mile, Interstate
196 1.3 miles.
Zoning: 1-2
Sprinkler System: 100%
Availability: 1-1-2006
For more informatioin please contact
us at 717-849-5042
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
14
Furniture & Clocks
TERMS OF SALE
Holland, MI. Mfg. Facility
REGISTRATION & DEPOSIT:
A minimum, refundable deposit of $200.00 paid in cash or check will be mandatory in order
to receive a bidder's paddle. All checks (blank or otherwise) must be made payable to
Industrial Recovery Services Inc. and accompanied by a Bank Letter of Guarantee. A deposit
of 25% must be maintained throughout the sale. All purchases must be paid for at the end of
each auction day. No lots will be removed until payment is made in full. NO EXCEPTIONS!
All purchases are subject to MI. State Sales Tax. If you are exempt, you must provide proper exemption documents.
Thurs. Oct. 27th 10:00am
Preview: Wednesday, October, 26th 9am-4pm
1201 Industrial Ave., Holland, MI.
PAYMENT:
Only Cash, Certified or Cashier’s check payable to Industrial Recovery Services will be
accepted. Company or Personal Checks (blank or otherwise) payable to “Industrial Recovery
Services” will be accepted only if accompanied by a Bank Letter of Guarantee made payable
to the auctioneer showing a statement of limits and dated for the day of the sale. Your Bank
Letter of Guarantee must be good for 10 days beyond sale dates & should be similar to the
following:
Mr. “Customer’s Name” on account #____is a customer of this bank. This bank will guarantee unqualified payment to Industrial Recovery Services, Inc. up to the amount of $____. This
letter is for purchases made at the Sligh Auction being held on October 27th, 2005, in
Holland, MI. This letter is valid until November 7th, 2005.
AU
CT
IO
Payments made by wire transfer will be only be accepted if arrangements have been made
(2) days prior to the auction with our auction office.
N
BUYER’S PREMIUM:
A 10% Buyer’s Premium will be applied to all on-location purchases.
A 13% Buyer’s Premium will be applied to all Web-Cast purchases.
ABSENTEE BIDDING:
If you have a problem attending the auction and would like the auctioneer to bid on you
behalf, please call and ask us to explain our proxy bidding process. All proxy bids must be
received two days prior to the auction and accompanied by a 25% deposit. The above mentioned standard 10% Buyer’s Premium will be applied to all absentee purchases.
INTERNET BIDDING / WEB-CAST:
Simultaneous, real-time Internet bidding will be available on major equipment. Please contact
our office (no less then three days prior to the auction) to set up your web-cast account. A
13% Buyer’s Premium will be added to all Web-Cast purchases. Web-Cast participation will
be for large items only. Visit us at www.irsAuctions.com for details on internet bidding.
IMPORTANT NOTICE:
The Buyer acknowledges that he/she or an agent has inspected all the assets upon which
he/she will be bidding on and/or does purchase. Buyer agrees to accept assets purchased
“as is”, “where is”, “in place”, and “with all faults”. The Buyer expressively waives any claim
in respect to any possible future use of any asset purchased for any purposes whatsoever.
The Buyer does hereby assume and does agree to indemnify, defend and hold the Auctioneer
and Seller harmless for any future claim which shall pertain to the fitness, merchantability,
suitability for any particular purpose, or use of that asset as being purchased. Neither the
Auctioneer nor the Seller assumes any liability for errors, omissions and/or accuracy in this
listing. All assets will be offered subject to prior sale. Everything will be offered to the highest
bidder for cash in accordance with the Auctioneer’s customary “Terms of Sale”, copies of
which will be posted on the premises. Sale subject to other terms announced the day of the
sale.
Sorry, but due to insurance reasons & disruption of the sale, there will be no removal
of any large non-hand carriable items during the day of the auction!
®
INDUSTRIAL RECOVERY SERVICES
P.O. Box 5086 • York, PA 17405
RETURN SERVICE REQUESTED
DIRECTIONS:
From Grand Rapids Airport: Turn left from Airport enterance to M-6 west. Follow M-6 to merge with Interstate 196
west to Holland. Take exit 49 (M-40) north (right). Follow left
curve, factory on right.
From South Central: From south central take US 131 north
to M-6 west. Follow M-6 to merge with Interstate 196 west to
Holland. Take exit 49 (M-40) north (right) north. Follow left
curve, factory on right.
From South West (Chicago): Take Interstate 96 east to
Interstate 196 east. Follow Interstate 196 towards Grand
Rapids. Take exit 49 (M-40) north (left). Follow left curve, factory on right.
Accommodations:
Hampton Inn
Residence Inn
Fairfield Inn
12427 Felch St
Holland, MI 49424
631 Southpointe Ridge Rd
Holland, MI 49423
2854 W Shore Dr
Holland, MI 49424
616-399-8500
616-393-6900
616-786-9700
PLEASE FORWARD TO
MACHINERY BUYER