AC HYDRAULIC A/S

AC HYDRAULIC A/S
No. 2
Company Profile
AC Hydraulic A/S is a family owned limited company situated in Viborg, Denmark. It was established in 1958 by master smith Anker Christensen (AC) and
his 5 employees.
Shortly after launching his handicraft and repair shop business Anker Christensen was inspired to develop a high quality lorry and workshop crane.
This development lay the foundations for mass production and the AC Crane soon became known for its high
quality. Development of a wide range of lifting equipment
quickly took place and with the extended product programme the company was ready for exporting.
Today 130 employees work with development, manufacturing and marketing of hydraulic workshop equipment,
material handling equipment and made-to-measure
cylinders. We are an international company and export
more than 80% of production. AC Hydraulic A/S is still
wholly owned and managed by Søren and Claus Anker
Christensen, the 3rd generation of the Anker Christensen
family.
In order to constantly be abreast of developments our product developers
are always seeking to improve the current product programme as well as developing new products able to meet the needs and demands of the market. In
addition we continously invest in new machinery and production methods.
To ensure a consistent high quality each product is tested before shipment.
That and many other facts are stated in AC Hydraulic’s quality management
system that will be ISO 9001 certified in 2003.
Our vision is to be the best and most admired hydraulic company in Europe
within our product field. Nothing less.
We are constantly working to improve the primary concepts in our core
values:
EXCELLENCE IN
QUALITY, SAFETY,
DESIGN & SERVICE
INNOVATION
AND
AVAILABILITY
Everyday is a striving towards perfection and we
may never live 100% up to all of our goals
...but we try!
Table of Contents
Hydraulic Garage Jacks
Fork Lift Jack
Portable air-hydraulic Jack
Air-hydraulic Jacks
Jacking Beams
Heavy Duty Jacking Beams
Pit Jacks
Workshop Presses
Workshop Cranes
Transmission Jacks
Wheel Trolleys
Autolift
Axle stands
Bottle Jacks
Drum Trolleys
Subject to changes and misprint.
4
7
8
9
12
14
16
18
20
22
23
24
25
26
27
Hydraulic
Garage Jacks
•
•
•
•
•
•
•
•
DK20Q
DK50HLQ
4
World-class garage jacks.
Designed for heavy-duty, intensive and commercial use.
All models – except for DK20 - are delivered with
quicklift pedal.
Simple and safe to operate.
Dead-man’s control on lifting and lowering.
Built-in safety valve to ensure against overloading.
Increased manoeuvrability.
Low weight.
Ergonomically designed handle.
A complete programme developed by professionals for professionals.
DK20
DK20Q
DK60Q
DK100Q
With wheels G4 (optional).
DK120Q
DK40Q
DK100NLQ
With wheels G4 (optional).
DK120NLQ
With wheels G4 (optional).
High Lifters:
DK13HLQ
DK20HLQ
DK50HLQ
5
Hydraulic DK-Jacks
•
•
•
Ultra-low minimum height of only 80 mm for models up to 2 ton capacity.
Ergonomic designed handle ensuring a firm and pleasant grip whatever the conditions.
Wide and rugged frame construction made of high-strength steel.
G
Noiseless wheels on models up
to 2 t.
Range of minimum height (DK13HLQ =
380 mm).
D
F
B
E
A
C
C
Technical Data
Model
Capacity
Min. height (A)
Max. height (B)
Frame length (C)
Handle length (D)
Frame height (E)
Width (F)
Lenght min. height (G)
Weight
Quicklift
Rubber Tyres*
*Option.
kg
mm
mm
mm
mm
mm
mm
mm
kg
DK20
2000
80
495
660
950
160
410
173
31
DK20Q
2000
80
495
660
950
160
410
173
31
X
DK40Q
4000
140
605
800
950
240
500
265
95
X
G4
DK60Q
6000
140
600
800
1200
240
500
265
95
X
G4
DK100Q
10000
150
585
805
1200
260
530
260
118
X
G4
DK100NLQ
10000
170
670
1700
1230
280
470
136
X
G4
DK120Q
12000
150
585
805
1200
260
530
250
118
X
G4
DK120NLQ
12000
170
670
1700
1230
280
470
136
X
G4
DK13HLQ
1300
80
735
940
950
160
480
380
39
X
DK20HLQ
2000
80
795
950
950
220
500
173
49
X
DK50HLQ
5000
140
975
1290
1200
265
525
352
170
X
G4
Option:
36 060 00 (T3): Cross beam adaptor,
capacity: 1000 kg.Will lift both wheels
of front-wheel driven cars without
axle beam.
6
36 016 00 (FDK1): 100 mm extension
for lifting vehicles with increased clearance. For models up to 2 ton capacity.
36 017 00 (FDK2): 125 mm extension
for models with more than 2 ton capacity.
36 014 00 (GS1): Jack saddle cushion
for all models up to 2 ton capacity for
protection of the car body. Made of
oil-resistant rubber with nonskid surface.
36 055 00 (G4): High quality rubber
tyres for extra manoeuvrability. For
models from 4 t to 12 t.
Fork Lift Jack
Hydraulic
Technical Data
Model
Lifting height, scissors
Lifting height, cylinder
Frame height
Length
Width
Weight
mm
mm
mm
mm
mm
kg
FJ40
55-455
410-730
100
810
250
43
Fork Lift Jack model FJ40
• Specially developed for fork-lift trucks - also suitable for industry and agriculture.
• Extremely low minimum-height of only 55 mm.
• Combi jack with overlapping lifting heights:
scissors 55-455 mm, cylinder 410-730 mm.
• Capacity: 4 ton on the scissors and 5 ton on the
cylinder.
• The jack is fitted with wheels allowing the point of
load always to be in the vertical position.
• Foldable - hereby also conveinient for on site servicing.
• Frame manufactured in steel and a hard chromium
plated piston rod ensure minimum maintenance.
• Precision release valve located in the pump
handle.
• Fitted with safety-overload valve.
FJ40
7
Portable airhydraulic Jack
25/10 ton
Patented
Technical Data
Model
A Handle length
B Frame length
C Min. height
D Lifting height/capacity
E Lifting height/capacity
G Frame width
H Frame width incl. wheels
I Standard extensions
J Weight
B25-2
510
540
162
234/25
317/10
225
271
50/100
25
mm
mm
mm
mm/t
mm/t
mm
mm
mm
kg
Extensions must not exceed 250 mm.
Ultra low weight and integrated design with no
loose tubes, handle or valves - has lead to the best
portable air-hydraulic jack on the market!
I
I
A
Portable air-hydraulic jack model B25-2
E
D
C
G
H
B
• Portable - ultra low weight - only 25 kg.
• User friendly - control valve, steering and
carrying handle integrated in only one function.
• Handy design - no loose tubes, handle or valves.
• Ideal for road service.
• Transit locking device - option for safe storage in service
trucks or in the workshop.
• Built-in safety valve to prevent overloading.
• Hard chrome plated piston rods for long life.
• Manually operated dead man's control for safe lowering.
• Supplied with two extensions of 50/100 mm.
Option:
B25-2
8
Transit locking device:
44 870 00 (SBB):
Safe storage in service
trucks. Prevents damages
at short stop.
Smart and practical wall
mounting.
Extension handle:
44 860 00 (HF):
Extra operating radius of
450 mm.
Extension 250 mm:
44 020 00 (F250).
Jack saddle ø145 mm:
44 021 00 (FW).
V-saddle:
63 231 00 (FW1).
Air-hydraulic
Jacks
Quality with
incorporated safety
•
•
•
•
Designed for heavy-duty, intensive and commercial use.
Built-in safety valve to prevent overloading.
Hard-chromium plated ram for long life.
Hand-operated dead-man’s control for safe lowering.
50-3
9
25-1 - For High Clearance
Model 25-1 with an extremely high lifting
height is designed for lifting contractor’s
machines, trailers, tractors and other
high clearance applications.
With extension F250 (option) the lifting height is
860 mm.
25-2 - For Multi-Purpose Use
Model 25-2 with a max. capacity of 25 t
is an all-round model that is very useful
in truck and bus workshops.
50-2 - For Heavy Lifting
Model 50-2 with a max. capacity of 50 t
is indispensable for lifting all heavy-duty
vehicles.
50-3 - For Low Clearance
Model 50-3 with an extremely low min.
height of only 150 mm is especially designed for lifting low buses and other
low clearance vehicles.
10
50-3H - With extra lifting
height
Model 50-3H, with a max. capacity of 50 t
is specially developed for heavy lifting with
extra lifting height. Lifts up to 558 mm.
60-1 - Heavy Duty Air Jack
Model 60-1 with a max. capacity of 60 t
is specially developed for lifting heavy
duty vehicles in the contractors’ business.
Supplied with pneumatic
tyres.
Option:
Telescopic handle for long reach (TH)
Increases the reach by 1000 mm.
I
A
G
I
H
44 020 00 (F250): Extra extension 250 mm.
(Not suitable for 50-3H and 60-1)
F
E
D
C
44 021 00 (FW): Jack saddle ø 145 mm.
Max. capacity 10 t.
(Not suitable for 50-3H and 60-1)
B
63 231 00 (FW1):V-saddle.
(Not suitable for 60-1)
Technical Data
Model
A Handle length
B Frame length
C Min. height
D Lifting height/capacity
E Lifting height/capacity
F Lifting height/capacity
G Frame width
H Frame width incl. wheels
I Standard extensions
J Weight
Extensions may not exceed 250 mm.
mm
mm
mm
mm/t
mm/t
mm/t
mm
mm
mm
kg
25-1
1360
800
360
610/25
230
310
50/100
71
25-2
1360
765
180
272/25
375/10
160
310
50/100
60
50-2
1360
810
220
337/50
445/25
200
310
50/100
80
50-3
1360
810
150
210/50
263/25
332/10
200
310
50/100
67
50-3H
1360
810
220
337/50
445/25
558/10
200
310
73
60-1
1360
810
245
382/60
200
375
50/120
93
11
Jacking Beams
SD26PHL
Quality and safety combined with the latest
technical innovations have lead to the best
jacking beam programme on the market
•
•
•
•
•
•
•
SD40PHL
5 models: 2 and 2,6 t in hand- or air-hydraulic
versions and a 4 t air-hydraulic version.
Minimum height of only 180 mm (230 mm SD40).
Unique support arm system fit all lift models and
pits (min. pit width 810 mm).
Optimum safety with “hands on” dead man’s
release system, safety stop and overload valve.
Lifting height of 250 mm.
Supplied with 3 sets of extensions. (2 sets SD40).
Low lifting frame with telescopic arms, range 780
up to 1610 mm.
SD40PHL
Unique support arm solutions:
Multi-adjustable support arm with
fixed rollers. Can be used on the vast
majority of lift and pit types.
Hook support arm with springsuspended rollers. For use on lifts and
pits with vertical bars.
List of support arms can be requested from AC.
12
Support arm with leaf-sprung rollers.
For use on lifts with low rails.
2 tonnes:
SD20L Double-acting hand hydraulic pump.
SD20PHL Air-hydraulic pump.
Standard: 3 sets of extensions 10, 40 and 85 mm.
2,6 tonnes:
SD26L Double-acting hand hydraulic pump.
SD26PHL Air-hydraulic pump.
Standard: 3 sets of extensions 10, 40 and 85 mm.
A
B
4 tonnes:
SD40PHL Air-hydraulic pump.
Standard: 2 sets of extensions 50 and 100 mm.
C
D
E
Option:
F
G
H
Rubber blocks:
Wodden blocks:
02 989 00 (FSD2): 160x120x40 mm. 02 930 00 (FSD4):
02 990 00 (FSD3): 160x120x80 mm. 250x75x50 mm.
Extension 130 mm:
62 125 00 (SD1): (Order 2).
(Only for SD20 and SD26).
Air connecting set:
62 325 00 (HSD):
Wire suspended. Length: 5 m.
Adjustable spindle extension:
62 237 00 (FSD5):
(Only for SD20 and SD26).
V-saddle:
63 231 00 (FW1): (Order 2).
(Only for SD40).
Jack saddle ø145 mm:
44 021 00 (FW): (Order 2).
(Only for SD40).
Technical Data
Model
Lifting
cap.
t
SD20L
2,0
SD20PHL
2,0
SD26L
2,6
SD26PHL
2,6
SD40PHL
4,0
*Without support arms.
Telescopic
arms
mm A
780-1610
780-1610
780-1500
780-1500
780-1500
Lifting
height
mm B
60-310
60-310
60-310
60-310
70-320
Frame
height
mm C
120
120
120
120
160
Frame
width
mm D
780
780
780
780
780
Frame
range
mm E
780-1170
780-1170
780-1170
780-1170
780-1200
Lifting frame
width
mm F
249
249
249
249
343
Min.
height
mm G
180
180
180
180
230
Total
width
mm H
365
365
365
365
475
Weight*
kg
105
110
105
110
175
13
Heavy Duty
Jacking Beams
6 - 20 ton
Air-hydraulic
Standard: 3 types of saddles and 2 types of
extensions (75 and 200 mm).
Option:
Twin-lift adaptor:
91 143 00 (FLDB). Optional diff beam allows use of
both rams to lift a vehicle at one point. Maximum
safe working load 20 t.
FL120
14
6-20 t Lift Mounted Heavy Duty Jacking
Beams model FL
• Sliding frame design allowing the jack’s width to
be safely adjusted.
• Traversing twin ram operation – the rams can
be used in tandem or independently (max. 10 t
per ram).
• The rams slide transversely, making precise positioning under the vehicle possible.
• Precise lowering for optimum working conditions and safety.
• Robust air-operated pump.
• Tidy storage of saddles and extensions.
• Rack on both sides for storage of tools, bolts
and screws etc.
• Safety valve ensures against overloading.
• Host burst valves in cylinders protect the load
from coming down in case of bursting hoses or
lost pressure.
FL120
Unique support arm system:
Heavy duty jacking beams are supplied with support arms adapted to the lift type.
All support arms come with leaf-sprung rollers, making it very easy to place the heavy
duty jacking beam under the lifting point.
List of support arms can be requested from AC.
Support arm examples:
Suspended on low rails.
Suspended on the platforms.
Suspended on lift with adjustable platforms and guide rails.
28 mm
28
min. 1000 max. 1300
min. 30 max. 255
Extensions:
(must be used with saddle)
347
Saddles:
(max. height)
min. 77 max. 299
The FL’s are made with saddle level (H) 100 -125 mm above the platforms.
39 mm
H
70 mm
75 mm
200 mm
Technical Data
Model FL
Capacity
Max. width
Min. width
Min. cylinder distance
Max. cylinder distance
Stroke
Weight
t
mm
mm
mm
mm
mm
kg
60
120
160
200
6
12
16
20
1300
1300
1300
1300
1000
1000
1000
1000
200
200
200
200
734-1034 734-1034 734-1034 734-1034
222
222
222
222
360
360
380
380
15
Pit Jacks
Air-hydraulic
Technical Data
Model
Lifting capacity t
Stroke length mm
Weight*
kg
GD100 GD150 GD200
10
15
20
620
620
620
111
112
113
*Excl. cradle.
•
•
•
•
•
Rapid and precise air-hydraulic unit with high
speed ram travel for both lifting and lowering.
Space-saving and easy to operate, without any
vulnerable external oil tubes and hoses.
A minimum of maintenance due to robust and
thouroughly tested design.
Capacity 10t – 15t – 20t.
Quality with built-in safety.
GD150
16
Rapid air-hydraulic unit with
high speed ram travel for both
lifting and lowering. Slim cylinder with integrated pump. Supplied with water separator and
fog lubricator for a long life.
GD100 (10t)
GD150 (15t)
GD200 (20t)
Tailor-made cradle to fit your
pit perfectly.The cradle rollers
can, however, always be adjusted ± 20 mm to each side.
Please ask your supplier for
the “Customer Specifiation
Form for Cradle”.
Option:
Cross Beam Adaptor
58 100 00 (T150) 15t:The cross beam adaptor is essential when lifting on two points.The flexible suspension ±7° providing extra safety with offset load
also prolongs the lifetime of the cylinder.
Increases the minimum height by 175 mm.
Max. safe working load 15 t.
Integrated Safety Stand
90 951 00 (S200) 20t:The integrated safety stand
with 6 positions solves the problem of placing conventional jack stands next to the pit. Suitable for all
models.
Increases the minimum height by 65 mm.
Max. safe working load 20 t.
Saddle:
90 717 00 (SB): Saddle with hole for oil plug.
Ø 145 mm.
Increases the minimum height by 35 mm.
Extension:
90 716 00 (FG250): Extension 250 mm.
17
Workshop
Presses
Hydraulic
Junior Presses
• For the auto workshop: PJ16H and PJ20H are
the only presses supplied standard with movable
cylinder and hand-hydraulic pump with footoperated air-controlled quick approach.
Standard Presses
• For the commercial and industrial workshop.
Supplied standard with movable cylinder and
cylinder-operated adjustment of table.
18
Technical Data
Model
PJ16H
PJ20H
P25H-2
P25H-3
P25EH1-D2
P25EH1-D3
P40H-2
P40H-3
P40EH1-D2
P40EH1-D3
P60H-2
P60H-3
P60EH1-D2
P60EH1-D3
P60EH2-D2
P60EH2-D3
P100H-2
P100H-3
P100EH2-D2
P100EH2-D3
Ton
16
20
25
25
25
25
40
40
40
40
60
60
60
60
60
60
100
100
100
100
A mm
640
640
720
720
720
720
850
850
850
850
1010
1010
1010
1010
1010
1010
1100
1100
1100
1100
B mm
885
885
1010
1010
1175
1175
1190
1190
1355
1355
1390
1390
1555
1555
1555
1555
1600
1600
1765
1765
C mm
220
220
240
240
240
240
265
265
265
265
310
310
310
310
310
310
300
300
300
300
D mm
150
150
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
E mm
100-775
100-775
75-775
75-775
75-775
75-775
85-785
85-785
85-785
85-785
180-780
180-780
180-780
180-780
180-780
180-780
75-675
75-675
75-675
75-675
F mm
1620
1620
1732
1732
1732
1732
1740
1740
1740
1740
1982
1982
1982
1982
1982
1982
2042
2042
2042
2042
G mm
130
130
170
170
170
170
215
215
215
215
259
259
259
259
259
259
325
325
325
325
H mm
535
535
540
540
540
540
600
600
600
600
680
680
680
680
680
680
800
800
800
800
L mm
135
135
140
140
140
140
140
140
140
140
120
120
120
120
120
120
120
120
120
120
J*
9,5
9,5
6,1
6,1
4,2
4,2
10.0
10,0
6,2
6,2
K**
12,7
12,7
7,9
7,9
5,9
5,9
14,5
14,5
8,3
8,3
Weight kg
130
130
210
215
235
240
420
425
440
445
615
625
620
630
625
635
1190
1200
1200
1215
*J: Electro-hydraulic press speed mm/sec. **K: Electro-hydraulic return speed mm/sec.
Decoding of models:
H (Junior) = Hand-hydraulic pump with foot-operated air-controlled high-speed ram travel.
H (Standard) = Hand-hydraulic pump with double-acting air-controlled high speed ram travel.
EH1
= 1-stage electro-hydraulic pump.
EH2
= 2-stage electro-hydraulic pump.
D
= Double-acting cylinder.
-2
= 200 mm stroke.
-3
= 300 mm stroke.
Standard models:
H model.
H model.
EH model.
Hand-hydraulic pump with double-acting aircontrolled high speed ram travel.
1- or 2-stage electrohydraulic pump.
All EH-presses are supplied with double-acting cylinder and 3x400V 50/60Hz (can be switched for 3x230V, 50/60 Hz).
All Standard-presses are supplied with either 200 or 300 mm stroke.
70 010 00 (PDS1):
Set of piston heads
for Standard Presses:
Rack + adaptor +
piston heads (ø10, 12, 15,
17, 20, 22, 25, 30 mm).
Option:
76 100 00 (PJW):Winch for lifting
and lowering of the press table.
(Only for Junior Presses).
70 012 00 (PPP1): Press plate.
75 010 00 (PDS2):
Set of piston heads
for Junior Presses:
Rack + adaptor +
piston heads (ø10, 12, 15,
17, 20, 22, 25, 30 mm).
19
Workshop
Cranes
Hydraulic
WJN portable fold-away cranes
Can be assembled or folded within seconds for quick
and easy storage.
Note the high capacity with jib arm in 5th position.
General advantages for all hydraulic workshop cranes
• Hydraulic pump with chromium-plated piston
rod ensure a long lasting quality product.
• The 360° revolving rear wheels make the cranes
very manoeuvrable, even when fully loaded.
• All cranes are supplied with a 360° pivoting hook
and a fully adjustable jib arm with 5 positions.
• Hand operated dead man’s control for precise
and safe lowering.
WJN5 (550-350 kg)
WJN10 (1100-700 kg)
20
WN11
WN15
WN20
WN25
(1100
(1500
(2000
(2500
kg)
kg)
kg)
kg)
WN Heavy-Duty Commercial Cranes
are made to withstand the most rigorous applications.
Inner frame width enables the use of EUR pallets.
360° pivotable pump units ensure easy operation in
confined areas.
EUR-models:
The WJN5 and WJN10 can be supplied with parallel legs for EUR pallets.
Order WJN5-EUR or WJN10-EUR.
Technical Data
Model
Lifting capacity
Max. lifting height
Lenght of jib
Height of frame
Length of frame
Overall height
Width inside
Width of frame
Net weight
Wheel diameter
P1-P5
H1-H5
L1-L5
A
B
C
D
E
kg
mm
mm
mm
mm
mm
mm
mm
kg
mm
WJN5(EUR)
550-350
2020-2340
955-1375
125
1420
1520
(1020)
1090
75
125
WJN10(EUR)
1100-700
2020-2340
955-1375
125
1420
1520
(1020)
1130
95
125
WN11
1100-700
2260-2540
1210-1630
160
1750
1690
820
1000
168
125/150
WN15
1500-1100
2260-2540
1210-1630
160
1750
1710
820
1000
175
125/150
WN20
2000-1600
2340-2630
1210-1630
160
1750
1850
840
1020
250
125/150
WN25
2500-1700
2340-2630
1210-1630
160
1750
1850
840
1020
255
125/150
21
Transmission
Jacks
Hydraulic
Quality with
incorporated safety
Technical Data
Model
Capacity
Min. height
Max. height
Width
Weight
A
B
C
kg
mm
mm
mm
kg
VL3
300
1125
1950
530
33
VL6
600
1125
1950
530
33
VL10
1000
1170
2000
550
40
VLT12
1200
905
1920
720
70
•
•
•
•
•
•
Practical pedal operation leaving hands free.
Hand operated dead man’s control for safe and precise lowering.
Big solid swivel wheels ensure maximum stability
and mobility.
Chromium-plated piston rod and pump piston prevent rust.
Safety valve prevents risk of overloading.
VLT12 is supplied with telescopic cylinder, automatic
quicklift and two lockable wheels.
Option:
90 588 00 (AS1): 360x370
mm – Cardanic fully adjustable saddle for passenger
vehicles, capacity 300 kg.
90 596 00 (AS2): 550x560
mm – Cardanic fully adjustable saddle for trucks, buses
and 4WD, capacity 750 kg.
90 595 00 (S): Saddle, for assembly of springs, gas tanks,
exhaust pipes etc.
36 014 00 (GS1): Rubber
saddle cushion for 90 595 00,
for protection of car body.
VL
22
VLT
Wheel Trolleys
Hydraulic
WT500
•
•
•
•
•
•
•
For quick and easy handling of wheels.
Prevent injuries when working with trucks,
buses, tractors etc.
Time-saving as both single and twin wheels can
be removed by only one man.
No damage to threads when removing wheels
and hubs.
Each lifting arm has two sets of roller bearings
enabling twin wheels to revolve independently.
Hand-operated dead man’s control for safe and
precise lowering.
Easy to operate pedal-controlled pump.
WT1000
Technical Data
Model
Capacity
Frame width
Distance between rollers
Total width
Total height
Total length
Min. lifting height over rollers
Max. lifting height over rollers
Roller length
Diameter of swivel wheels
Diameter of fixed wheels
Diameter of rollers
Applicable for wheel diameters
Weight
A
B
C
D
E
F
G
H
I
K
L
kg
mm
mm
mm
mm
mm
mm
mm
mm
Ø mm
Ø mm
Ø mm
Ø mm
kg
WT500
500
735
695
950
1105
880
85
600
650
100
125
40
800-1400
90
WT1000
1000
1010
885
1250
1300
1130
160
750
610
125
150
100
1150-1440
200
23
Autolift
Air-hydraulic
Technical Data
Model
Capacity
Min. height
Max. height
Lifting speed, approx.
Net weight, lift
Net weight, box
Air pressure
L20PH
2000
115
910
60
193
32
7-12
kg
mm
mm
sek.
kg
kg
bar
•
650-15
0-2310
115-910
60
0
145
100
0
5
272
•
•
•
•
•
•
Supreme accessability and working height – for
brake and body repairs, wheel change, sanding
and filling, reassembly etc.
All operations are controlled from the control
box.
Stable support arms adjustable in all directions.
Saddle height adjustable up to 58 mm.
Long life time with greasing nipples in all hinges.
The cylinder is protected by a metal cap.
No additional costs for installment.
Easy to move with the trolley.
All operations are controlled by single
pedal on portable control box.
The automatic safety stop is also released by remote control from the
control box. Protected against overloading and hose burst.
Option:
Trolley
56 010 00 (TR):The lift is moved easily and
quickly with the trolley. (Option)
24
Saddle
36 014 00 (GS1): Saddle cushions for
protection of car body and anti-rust
coating.
Axle stands
•
•
•
•
AC axle stands – when safety is a top priority.
The best axle stands in the market.
Circular base pads ensure maximum stability.
When working under a vehicle the axle stand
is a matter of confidence.
1500N
1500NH
3000N
5000N
7500N
7500NL
3000N-GS1
Technical Data
Model
Capacity
Min. height
Max. height
Positions
Weight
t
mm
mm
kg
All measures to the upper edge of the saddle.
1500N
1,5
335
490
4
3,5
1500NH
1,5
440
700
6
5,5
3000N 3000N-GS1 5000N
3,0
3,0
5,0
335
335
390
545
545
600
5
5
5
5,2
5,6
7,3
7500N
7,5
665
1015
6
23,3
7500NL
7,5
300
430
3
11,4
25
Bottle Jacks
Hydraulic
•
•
•
•
•
AC bottle jacks – when safety is a top priority.
The bevelled base plate ensures greater stability
as the jack follows the tilt of the vehicle during
the lifting operation.
Long lifetime due to a design of the base plate
that minimizes the risk of injuries to the piston
and the piston rod.
All models are supplied with tripartite handle.
Model ATN10-175 with horizontal movement.
Bevelled base.
Technical Data
Model
A2-170
A3,5-170
A5-212
AX8-220
A10-220
A12-230
A15-230
A20-240
AH25-240
A30-240
A50-250
A100-300
ATDX3-185
AT5-215
ATG10-200
ATPX12-230
ADX4-370
ADX10-370
ATN10-175
26
Lift.cap.
ton
2,0
3,5
5,0
8,0
10,0
12,0
15,0
20,0
25,0
30,0
50,0
100,0
3,0
5,0
10,0
12,0
4,0
10,0
10,0
Min. height mm
A
170
170
212
220
220
230
230
240
240
240
250
300
185
215
200
230
370
370
175
Hydr. lift mm
B
115
115
150
150
150
157
155
155
157
142
155
150
215
305
262
255
260
260
210
Spindle mm
C
92
92
100
110
110
110
110
110
118
100
68
85
-
Max. height mm
D
377
377
462
480
480
497
495
505
515
482
405
450
400
520
530
570
630
630
385
Net weight
3,5
3,8
4,7
7,0
7,0
8,1
9,2
11,8
14,3
15,3
40,0
70,0
5,0
7,2
10,2
13,4
7,3
10,5
8,7
Bevelled
base
•
•
•
•
•
•
•
•
•
•
•
•
With
With telesingle cylinder scopic cylinder
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drum Trolleys
Hydraulic
Technical Data
Hydraulic Drum Trolleys
model DT300 / DT300H
• Prevent working injuries when lifting drums.
• Constructed for handling of 200 L drums.
• Suitable for loading and unloading of 200 L
drums in delivery vans.
• Foot-operated pump - easy to operate.
• Hand-operated dead man's release for safe and
precise lowering.
• Legs adapted for EUR-pallets.
DT300 - Small wheels – specially
suitable for lifting of drums onto
drip pans.
DT300H - Large wheels for optimal transport of the drum.
Beak grip locks automatically
when lifting the drum.
Beak grip releases automatically,
when the drum is lowered.
Model
Lifting capacity
Lifting height
Distance bet. legs
Outer frame width
Height Min./Max. A
Leg length
B
Leg height
C
Length
D
Wheel dia. fixed/swivel
Weight
kg
mm
mm
mm
mm
mm
mm
mm
mm
kg
DT300
DT300H
300
300
700
700
870
870
960
960
1410/1915 1450/1955
570
645
65
125
850
905
ø65/ø80 ø125/ø125
67
69
27
AC Hydraulic A/S
Fanøvej 6 . DK-8800 Viborg . Tel.: +45 86 62 21 66 . Fax: +45 86 62 29 88
E-mail: [email protected]
www.ac-hydraulic.com