H2. Greenlee 3.3 MB
Transcription
H2. Greenlee 3.3 MB
GREENLEE Tools H2 GREENLEE February 2015 Ver 01.15a Tools GREENLEE H2 2 Contents Cable Stripper 4 Circuit Seeker Tracer Kit 6 Fish Tapes 7 Battery Powered Hydraulic Punching Tool 8 Tools 5 H2 Tele-Mate Telephone Test Set GREENLEE Self Checking Non Contact Volt Stick Greenlee Products HIGH PERFORMANCE CABLE STRIPPER HAMER CODE CAT. CODE DESCRIPTION GL1903 1903 Greenlee 1903 High Performance Cable Stripper 4.5 to 40mm Diameter GL13544 13544 Greenlee Spare Blades - Twin Pack for the 1903 Cable Stripper Tools GREENLEE H2 Features Triple action stripping – rotary, linear, and spiral – “Window” stripping is accomplished by combining 2 rotary cuts with a spiral cut in between them. ELIMINATES CABLE SCORING. Blade height is adjustable to precisely match insulation thickness Interchangeable cable guides for small and large cable diameters Hook on the cable guide is used to start jacket removal without the need to use a screwdriv er or pliers Replacement blade storage pocket in the base of the tool Long life, high-carbon steel blade Ergonomic handle shape Suitable for most jacket materials Using the 1903 to strip a cable jacket is simple. First, select the correct cable guide for the size of cable you need to strip. Then, set the blade depth using the knurled knob. Make sure the depth is deep enough to cut the jacket, but not quite deep enough to score the cable. Then put the tool onto the cable and turn it around three or four times to ring the cable. Now turn the tool body and blade to either make a spiral or longitudinal cut to the cable end. When this is done, use the hook at the end of the cable guide to begin peeling off the jacket. Once the jacket removal is started, you can peel it the rest of the way by hand. HAMER CODE CAT. CODE GL09022 GT-12A DESCRIPTION Greenlee GT-12A Non Contact Volt Stick CATIV 50 - 1000V AC Features Patented automatic self-test CAT IV; 1,000V AC Bright LEDs flash and audible alarm sounds if AC voltage is present Silent mode for use in quiet areas Safe, non-contact voltage detection Automatic shut-off* extends battery life (*after 5 minutes of inactivity) Lifetime Warranty* Designed and assembled in USA 4 TELE-MATE TELEPHONE TEST SETS TM 500 Greenlee TM500 Tele-mate Telephone Test Set Features Luminescent (glow-in-the-dark) keypad Can be used safely on a DSL enabled line High Impedance Monitor for monitoring line without disrupting existing traffic Over voltage and over current protection Tone and Pulse dialling for versatility on old and new phone lines Polarity test with LED indicator 32 digit last number redial and pause 10 number speed dial Adjustable volume control plus mute Pause Flash to generate a timed break recall Line powered, no battery needed Headset (included) for hands free operation RJ11 socket Able to tackle the complexities of today’s analogue tele-communication lines, the TM-500 offers the convenience of line powered (no battery needed) operation and useful features like a high impedance monitor that is data and DSL safe, polarity test, speed dial, last number dialled and pulse dialling, making a technician more productive. The TM-500 not only works in handset mode, but can be used with the headset (included) for easy hands-free operation. The TM-500 is safe to operate with over-voltage and current detection. 5 Tools GLTM500 DESCRIPTION GREENLEE CAT. CODE H2 HAMER CODE CIRCUIT SEEKER TRACER KIT HAMER CODE CAT. CODE GLCS8000 CS-8000 DESCRIPTION Greenlee CS-8000 Circuit Seeker Tracer Kit Tools GREENLEE H2 Advanced patented non-directional sensing technology. Superior sensitivity and functionality providing for accurate tracing and locating. Ergonomic receiver with information-rich full-colour graphical LCD. Graphics and audible signal provide quick and easy to understand tracing feedback. Traces concealed wiring, locates junction boxes, and finds breakers for live or open circuits. Locates and identifies blown fuses. Finds shorts and breaks in conductors. Low pitch, high volume audible indicator. User-selectable automatic or manual gain capability for fast, convenient use. Power saving features promote extended battery life (Auto Power Off). Can be used on GFCI protected circuits. Supports transmitter-to-receiver distances up to 4 miles for closed circuit tracing. Does not affect sensitive electronic equipment on the circuit. Auto backlight on receiver maximizes battery life. Lifetime Limited Warranty. Operating Conditions: Temperature: 0 to +50 ºC (32 to 122 ºF) Altitude: 2000 m (6500’) maximum Pollution Degree: 2 Indoor use only Transmitter Measurement Category: Category III, 750V Operating Voltage: 0-750 V AC/DC Live line LED indicates voltage above 12 VAC or 5 VDC Frequency: 15.15 kHz Low battery indicator Batteries: Two AA batteries (NEDA 15A or IEC LR6) Receiver Range from Receiver to item with Signal: Live Line Mode – up to 20 ft (6 m) from circuit Open Line Mode – Up to 10 ft. (3 m) with a metallic connection to ground. 1 to 3 ft. (.3 to .9 m) with a capacitive ground reference. Low battery indicator Batteries: Two AA batteries (NEDA 15A or IEC LR6) Greenlee is proud to announce the CS-8000 Circuit Seeker™ Circuit Tracer. Taking advantage of patented non-directional sensing technology, the Greenlee CS-8000 Circuit Seeker™ Circuit Tracer promises to locate circuits that other units can’t. Utilizing both visual and audible signals in an ergonomically-designed handset, the CS-8000 is able to trace concealed wires (behind walls, in floors, in non-metallic conduit, etc.) without power interruption on circuits ranging from 0-750 volts AC or DC. And, the CS-8000 provides the ability to locate breakers for any circuit - live or open. Easy to use and amazingly accurate, the Greenlee CS-8000 Circuit Seeker™ Circuit Tracer will prove itself to be standard equipment for the contractor team when accurate tracing and locating is required. As part of the Greenlee Test and Measurement Product line, the CS-8000 Circuit Seeker™ Circuit Tracer meets the latest industry safety standards and is backed by a lifetime limited warranty. 6 Fish Tapes OIL-TEMPERED SPRING STEEL FISH TAPES CAT. CODE DESCRIPTION LXW GL12729 FTS438-65 Steel Fish Tape (small) 19.8 m × 3.2 mm GL12709 FTS438-125 Steel Fish Tape (large) 38.1 m × 3.2 mm GL12730 FTS438-240 Steel Fish Tape (XL) 73.2 m × 3.2 mm WEIGHT 1.4kg (65' × 1/8") 2.5kg (125' × 1/8") 3.9kg (250' × 1/8") Tools MagnumPRO™ Oil-Tempered Spring Steel Fish Tapes Rugged case design improves drop impact capability. Oil-tempered spring steel for excellent fishing performance. Advanced comfort handle grip reduces fatigue. Superior rapid tape pay-out and rewind. Improved low profile tip for easy fishing through all sizes of conduit. Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly. 1/8" and flat steel profiles to accommodate different fishing situations. Capacity 1/8" (3.2 mm) tape width- 400 lbs. (1.7 kN) maximum design strength GREENLEE HAMER CODE GL12729 CAT. CODE GL01696 438-2X DESCRIPTION LXW Flat-Steel Fish Tape- 1/4" Wide WEIGHT 7.6M x 6.4mm x 0.8mm 0.6kg (25' x 1/4") Flat-Steel Fish Tape- 1/4" Wide Flat steel tape reaches easily above ceilings, under carpets, and through walls to install wire. 25' (7.6 m) long, extending your reach. Winder case with crank handle for easy, compact storage. NYLON STEEL FISH TAPES HAMER CODE CAT. CODE DESCRIPTION LXW GL12715 FTN536-50 Nylon Fish Tape- 1/4" Wide WEIGHT 15.2 m × 4.8 mm 1.3kg (50’ x 3/16”) MagnumPRO™ Nylon Fish Tapes Non-conductive, curl resistant nylon tape for fast, clean fishing. Good for fishing in conduit with wire or cable present. Rugged case design improves drop impact capability. Advanced comfort handle grip reduces fatigue. Nylon fish tape is intended for fishing only. Rope or line is recommended for pulling. Capacity 3/16" (4.8 mm) diameter– 250 lbs. (1.1 kN) maximum design strength GL12715 7 H2 HAMER CODE BATTERY POWERED HYDRAULIC PUNCHING TOOL HAMER CODE CAT. CODE DESCRIPTION GLS50LFLEX LS 50-L FLEX Greenlee LS 50-L FLEX Battery powered hydraulic punching tool Tools GREENLEE H2 • Battery-powered punch driver with microprocessor • • • • High flexibility using 360° rotating head • • • Suitable for punching in plastic, fibreglass, aluminium & steel Automatic battery charge status recognition Lithium-ion technology allows long operating times and short recharging times Automatic retraction Automatic stop makes the punching tools last longer LED work light to illuminate the punch area Suitable for • • • • Punches up to 104.8 x 104.8 mm St37 3.5 mm Punches 92 x 92 mm or 46 x 92 mm, 68 x 68 mm or ISO 63 (64 mm dia.) round in St37 3.5 mm Suitable for 144,1 mm round - St37 3.5 mm Operating Conditions: Temperature: -12 to +40 ºC (5 to 122 ºF) Technical Data Weight: 2.21 kg (inc. battery) Punching force: approx. 60 kN Driving Motor: direct-current permanent field motor Motor voltage: 18 V DC Battery capacity: 3 Ah (RAL2) Charging Time: 22 mins (RAL2) Punching time: 5 s at Ø 22.5mm 3mm St37 Punching performance: *Approx 190 punches/battery @ 22.5mm Ø and 3 mm thick sheet *Approx 280 punches/battery @ 22.5mm Ø and 2.5mm thick sheet Hydraulic oil: Rivolta S.B.H.11 Sound level: <70 dB (A) 1m distance Vibrations: <2,5 m/s² Warranty: Suitable for Slug Splitter up to 64 mm round - 3.5 mm stainless steel 2 years Service: Regular servicing helps to maintain the proper functions of the machine. It is recommended to service every 10,000 punching cycles or once every year (which ever comes first) Refer to Greenlee/ Klauke’s authorized service agent for servicing. * In NZ see Jonel Hydraulic Services AKL. 8 Tools GREENLEE H2 Scope of supply: Cat # Quick-charger for 18V Li-Ion batteries, 230 V LGL1 Battery 18 V / 3.0 Ah, Li-Ion (54 Wh) RAL2 Draw stud for hydraulic operation 19.0 x 105 mm 50318721 Spacer, short 50032488 HSS Co5 step bit 52049371 Adapter 19.0 x 48 mm with internal thread 9,5 mm 50339672 Draw stud for punch with hydraulic operation 9.5 x 71 mm 51300430 Plastic case KK50LFLEX