CGTI - CUSTOM GRADE TUBES

ATN is proud to introduce its new line of Image Intensifier tubes:
CGTI - CUSTOM GRADE TUBES
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
1341 San Mateo Ave.,
South San Francisco,
CA 94080,USA
phone: 800-910-2862
650-875-0130
fax: 650-875-0129
www.atncorp.com
At ATN, we know that the performance and utility of a Night Vision
Device (NVD) is directly due to its Image Intensifier Tube (IIT)
performance. To meet the demands and expectations of our
customers, we developed our new range of IITs.
Our Custom Grade Tubes (CGTI) are ‘custom’ because that is
what they are: Custom! Engineered for significantly enhanced
performance over current 2nd generation IITs, our CGTI tubes deliver
the best performance to cost ratio in the marketplace. Units built with
CGTI tubes allow agencies to outfit three people for the cost of two
3rd generation units, with similar results.
IIT performance grades are defined by two major parameters:
Signal to Noise Ratio (SNR) and Resolution. New production
technology has resulted in improved performance specifications.
Our CGTI Image Intensifier Tubes have a Signal-to-Noise ratio of 15
to 20, with a Resolution of 45-54lp/mm.
ATN’s CGTI Tubes are fully compatible and interchangeable with
ANVIS and PVS7 models available from competing manufacturers.
The ATN CGTI image intensifiers are available in two formats: Inverting and Noninverting. They are 18mm NT's designed in a compact and Drop in format. They consist of
a Multi-Alkaline photocathode, microchannel plate, built-in power supply and flat glass
input window.
The I160 Series are fully compatible and interchangeable for use in all night vision
systems that use an inverting tube such as AN/PVS-6, 9, 6015 models, MUM-14 minimonocular, NVM-14 and various commercial models available from competing manufacturers.
The N130 Series image intensifier tubes (IITs) are fully compatible and interchangeable for use in all night vision systems that use a non-inverting tube such as AN/PVS-7,
NVG-7, PS22 and various commercial models available from competing manufacturers.
ATN N130 Series
Dimensions (mm)
Input Image Plane
n=38.77
23.4
19.73±0.31
0.65-0.1
R0.80
2 contacts
t= .6
R2.00
I160 IITs are compatible with AN/PVS - 6, 9, 6015,
MUM-14, NVM-14 and numerous commercial models.
1.35
17.50
14.20
Ø 43
Spherical
Radius
R 18
Ø 20.4
5.50-0.40
31.65
Ø 19.60
INPUT END
Ø 23
Ø 25.60
N130 IITs are compatible with AN/PVS - 7,
NVG-7 and numerous commercial models.
OUTPUT END
MAIN PARAMETERS:
ATN I160 Series
Dimensions (mm)
Input Image Plane
n=38.77
2 contacts
t= 0.2
2.50
10
4
30°
Ø 20,4
30°
1
Ø 36.5
5.4
6.50
4.0
INPUT END
N130-CGTI
SPECIFICATION
18
S-25
45-54
14 to 20
<350
700-1000
Photocathode Diameter, mm
Photocathode Type
Resolution, lp/mm
Signal to Noise ratio
Luminous sensitivity, µA/lm
FOM
Image magnification
Current consumption, max, mA
Voltage, V
Weight, g
Shock resistance, g
Mean time before failure, hours
I160-CGTI
18
S-25
45-54
14 to 20
<350
1x
700-1000
1x
16
2,8 ± 0,8
90
500
10,000
16
2,8 ± 0,8
90
500
10,000
MODULAR TRANSFER FUNCTION
Output Image Plane
=40±1.0
2.5
7.5
15
OUTPUT END
MAXIMUM SPOTS ALLOWED IN FIELD OF VIEW:
Zone
Number
Circular zone
Dimensions, mm
Maximum diameter of spots
Admitted
Neglected
Diameter, mm
Quantity
Admitted total
2
Area of defects, mm
1
0 - 9,0
0.1
0.15
1
0.15
2
9,0 - 14,5
0.12
0.25
2
0.3
0.15
0.35
2
0.5
3
14,5 - 18
Ex p o r t o f n ig h t v is io n equipment is c ont rolled by t h e U .S. Departm en t o f State, Of f i ce o f Def en se Trade C o n tro l s i n a c c or d a n c e
w i t h I n te r n atio n al Traffic in Arms (I TAR ), Tit le 22, C o de o f F ederal Regu l ati o n s Part 120-130an d/o r th e E xp or t
A dm in is t r atio n R e g u lat ions (EAR ) U. S . Depart ment o f C o m m erce. Il l egal expo rt o f th ese co m m o di ti es i s stri c tl y p r oh i b i te d .
American Technologies Network, Corp.
1341 San Mateo Ave., South San Francisco, CA 94080 USA
phone: 800-910-2862, 650-875-0130; fax: 650-875-0129, www.atncorp.com