Carson Machine Automation

Transcription

Carson Machine Automation
US T
L
RP EN
SU IPM
U
EQ
Public Auction
EV
MU ERY
ST THI
SE NG
LL
!
SURPLUS TO THE NEEDS OF
CARSON MACHINE AUTOMATION
VERY CLEAN MACHINE SHOP
1318 RAMSEUR ROAD - BESSEMER CITY, NC 28016
THURSDAY, NOVEMBER 20TH @ 10:00 A.M. EST
Inspection:
WEDNESDAY,
NOVEMBER 19TH,
From 8:00 A.M. 4:00 P.M. EST
1 of 2
SCOTCHMAN 4014C 40 TON
IRONWORKER
(2) LODGE & SHIPLEY 2013 ENGINE LATHES
1 of 3
REISHAUER 12 GEAR GRINDER
(3) WARNER & SWASEY #2A TURRET LATHES
i
A ss e t s i n
to
D
la r
s
Tur
n
r
You
ol
ng
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
European Headquarters
P.O. Box 819, Halifax HX1 9QQ UK
Tel / Fax 07836.347880
[email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5
Tel 902.852.5331 Fax 704.821.4325
[email protected]
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, NOVEMBER 19TH 8:00 A.M. - 4:00 P.M. EST
1 of 2
MEUSER M1L GAP BED LATHE
(2) LODGE & SHIPLEY 2013 ENGINE LATHES
MONARCH ENGINE LATHE
HERCULES SAG14 GAP BED LATHE
MONARCH ENGINE LATHE
HENDEY TOOL ROOM ENGINE LATHE
LATHES
(2) LODGE & SHIPLEY Model 2013 Engine Lathes with Power Turn Power Shift-Pre
Selector, 22” Swing x 54” Center Distance, 12” 3-Jaw Chuck, 13” Swing Over Cross Slide,
Tailstock, 2” Bore, Threading, Toolpost, 20 HP, Steady Rests, sn:44703 & 44704
MEUSER Model M1L Gap Bed Lathe with 19” Swing x 120” Center Distance, 12” 3-Jaw
Chuck, Inch / Metric Threading, 2-1/8”” Bore, 28-1250 RPM, Tailstock, Toolpost, Chip Pan,
Steady Rest, sn:44904
MONARCH Engine Lathe with 20.5” Swing x 78” Center Distance, 12” 3-Jaw Chuck,
Tailstock, Approximately 1-3/4” Bore, Threading, 24-1000 RPM, 15 HP, Chip Pan, sn:43476
HERCULES Model SAG14 Gap Bed Lathe with 18” Swing x 56-1/2” Center Distance, 12”
3-Jaw Chuck, Inch / Metric Threading, 2” Bore, 70-1500 RPM, Tailstock, Toolpost, Chip Pan,
Steady Rest
BOYE & EMMES Heavy Duty Engine Lathe with 30” Swing x 72” Center Distance, 21” 3-Jaw
Chuck, 7-301 RPM, 2-1/4” Bore, Threading, Toolpost, sn:E-89
Extra Tooling, Steady Rests, 10” & 12” 4-Jaw Chucks, Chuck Jaws
HENDEY Tool Room Engine Lathe with 16” Swing x 36” Center Distance, 10” 3-Jaw Chuck,
Threading, Taper Attachment, 1-1/2” Bore, 18-539 RPM, Tailstock, Toolpost, Chip Pan,
Steady Rest, sn:33411
2
AUCTION SALE DATE & TIME – THURSDAY, NOVEMBER 20TH @ 10:00 A.M. EST
WARNER & SWASEY #4 TURRET LATHE
3
AVAIL
WARNER & SWASEY #3 TURRET LATHE
GISHOLT 3R TURRET LATHE
TURRET LATHES
(3) WARNER & SWASEY Model #2A Turret Lathes with 6 Station Turret, 20” Swing, 18”
3-Jaw Chuck, 40 HP, Tool Holder, Spindle Inching, 3-3/4” Bore, Chuck Guard, sn:2558776,
2594584 & 2546465 one has Cross Sliding Turret
WARNER & SWASEY Model #4 Turret Lathe with 6 Station Turret, 18-1/2” Swing, 15/7.5
HP, Toolpost, Approximately 2-7/16” Bore, Coolant, Chip Pan, sn:2103340
(3) WARNER & SWASEY #2A TURRET LATHES
WARNER & SWASEY Model #3 Turret Lathe with 6 Station Turret, 15” Swing, 10” 3-Jaw
Chuck, 10/5 HP, Approximately 1-3/4” Bore, Toolpost, Coolant, Chuck Guard, Chip Pan,
sn:2594584
Want to Sell Your Shop or Know Someone Who Does?
Call Us Toll Free at (888) 800-4442!
We Pay Great Finder’s Fees!
GISHOLT Model 3R Turret Lathe with 6 Station Turret, 30” Swing, 21” 3-Jaw Chuck, 6”
Bore, Approximately 15 HP, 13-270 RPM, Tooling, Coolant, Chip Pan, (no compound &
crosslide), sn:292550
3
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, NOVEMBER 19TH 8:00 A.M. - 4:00 P.M. EST
ATTENDING THE AUCTION IN
PERSON?
What you need to bring.....
• Your Driver’s License
• Business Card
• Tax Exempt Form if Non
Taxable
• Bank Letter of Guarantee if
Paying via Company Check
LATE
MODEL
SCOTCHMAN 4014C 40 TON
IRONWORKER
TORSIONARDORAS FSB T-20 TWISTING ROD IRON
MACHINE
1 of 5
BRIDGEPORT VERTICAL MILLING BRIDGEPORT VERTICAL
MACHINE
MILLING MACHINE
SHARP SP-2 VERTICAL MILLING EX-CELLO-O VERTICAL MILLING
MACHINE
MACHINE
IRONWORKER
SCOTCHMAN Model 4014C 40 Ton Ironworker with 1-1/4” Diameter Through 3/8” Thick Punch Capacity, 3/4” Maximum
Thickness Punched, 6” Punch Throat, 3” x 3” x 5/16” Angles, 14” Shear Length, sn:6683FF696
TWISTING ROD IRON MACHINE
TORSIONADORAS FSB Model T-20 Multi-Ornamental Forge & Twisting Rod Iron Machine, sn:USA0031U32001
VERTICAL MILLING MACHINES
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slot Table, Speeds from 80-2720 RPM, DRO, Universal Head, 1 HP,
Table Power Feed, Cool Mist, sn:181992
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slot Table, Speeds from 80-2720 RPM, DRO, 1 HP, Table Power Feed,
sn:106760
SHARP SP-2 Vertical Milling Machine with 9” x 42” T-Slot Table, Speeds from 80-5520 RPM, 2 HP, Table Power Feed,
sn:8050115
EX-CELLO-O Vertical Milling Machine with 9” x 50” T-Slot Table, Variable Speed from 85-4000 RPM, Table Power Feed, Style
602, Collet Holder Attachment, sn:6028919
FAMCO VERTICAL MILLING
MACHINE
FAMCO Model 120 Vertical Milling Machine with 10” x 50” T-Slot Table, Variable Speed from 120 – 4300 RPM, Power Feed Table
& Saddle, Coolant, sn:MA-E68VRY6
4
AUCTION SALE DATE & TIME – THURSDAY, NOVEMBER 20TH @ 10:00 A.M. EST
MILWAUKEE 2H UNIVERSAL HORIZONTAL MILLING
MACHINE
POWERMATIC 87 VERTICAL
BANDSAW
GROB S24U VERTICAL BANDSAW
Download a lot book at
www.asset-sales.com
1 of 3
LANDIS TYPE LC UNIVERSAL CYLINDRICAL GRINDER
DAVIS HANSFORD KEYSEATER
DAKE JOHNSON JH10 HORIZONTAL BANDSAW
DC MORRISON KEYSEATER
DAVIS KEYSEATER
HORIZONTAL MILLING MACHINE
VERTICAL BANDSAW
KEYSEATERS & BROACH
MILWAUKEE Model 2H Universal Horizontal Milling
Machine with 10” x 50” T-Slot Table, 35-1400 RPM,
Universal Head & Tailstock, Coolant, Tooling, sn:30-5254
POWERMATIC Model 87 Vertical Bandsaw with 20” Throat,
2’ x 2’ Table, Welding Attachment, Worklight, sn:67-7729
DC MORRISON Keyseater with 24” x 27” Table Capacity,
sn:K894618
GROB Type S24U Vertical Bandsaw with 24” Throat, 30” x
30” Table, Welding Attachment, Worklight, sn:118
DAVIS HANSFORD Model 5 Keyseater with 20-1/2” x 31”
Table Capacity
HORIZONTAL BANDSAW
DAVIS Model 4 Keyseater with 16” x 26” Table Capacity,
sn:4-270
UNIVERSAL CYLINDRICAL GRINDER
LANDIS Type LC Universal Cylindrical Grinder with 12”
Swing x 28” Centers, sn:21560
TUBE BENDER
DAKE JOHNSON Model JH10 Horizontal Bandsaw with 11”
x 18” Capacity, Chip Pan, sn:75844
Hydraulic Tube Bender
5
LAPOINTE Type 2L 7-1/2 Ton Broaching Machine with
Coolant, sn:46023
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, NOVEMBER 19TH 8:00 A.M. - 4:00 P.M. EST
GEAR MACHINERY
REISHAUER Model 12 Gear Grinder with 9-1/2”
Capacity with Truing, Cooling Option, Pitches of DP612, DP13-48, Maximum Workpiece Diameter 240mm,
Maximum Number of Pitch Teeth 130, Minimum
Number of Teeth 12, Maximum Pitch 4 Modular,
Minimum Pitch 0.5 Modular, Maximum Helix Angle
Both Sides 45° 8.5 HP, Grinding Length 170mm,
Loads of Tooling, Crowning Device, sn:32994-564
MOREY 8” Vertical Gear Shaper/Slotter with 21”
Table Diameter, Approx. 50” Cross Travel, 15” Saddle
Travel, 10” 3-Jaw Chuck, Rapid Traverse, Ram Angle
Adjustment, sn:M-126-8V5
GOULD & EBERHARDT Model G18-5 Gear Hobbing
Machine with 16” Diameter Capacity
REISHAUER GEAR GRINDER
MOREY 8" VERTICAL GEAR
SHAPER/SLOTTER
(3) FELLOWS Model 6A Gear Shaper with 18”
Maximum Pitch Diameter, 5” Stroke, Coolant, Large
Quantity of Change Gears
BARBER-COLMAN Model #12 with 12" Max.
Diameter, 10" Max. Width of Face, 1-1/4" Diameter of
Hob Mandrel, 4" Max. Diameter of Hob, 8 No.
Changes of Hob Speed, 45-220 RPM Range of Hob
Speed
FELLOWS Model “The Red Liner” Testing Machine,
sn:32715
RADIAL ARM DRILL PRESS
CINCINNATI BICKFORD Radial Arm Drill with 9”
Column x 3’ Arm, 4-1500 RPM, L Style Base, 18” W x
24” L x 13” H Box Table, sn:1R4369
HORIZONTAL HONING MACHINE
Honing Machine with V-Block, Coolant, Tooling
VERTICAL HONING MACHINE
SUNNEN Model CV-616 King Automatic Vertical
Cylinder Honing Machine with ¾” – 6” Diameter
Range, Length Range up to 18”, 125-310 RPM Spindle
Speeds, 41, 57, 80 SPM Stroking Rate, 0-9” Stroking
Length, sn:3831
LAPOINTE TYPE 2L BROACHING MACHINE
GOULD & EBERHARDT G18-5
GEAR HOBBING MACHINE
1 of 3
WELDING POWER SOURCE
HOBART Model CT300 Series 120 Cyber-Tig
Welding Power Source
HOBART Champion 16 Generator & Welder for Stick,
Tig & Mig Welding, 8000 Power Generator with
Trailer, 596 Hours, sn:KK255670
MILLER Model
sn:JE750394
Pulstar450
Power
Source,
(2) MILLERMATIC Model 210 Power Source,
sn:LG351458B & LC107060
LINCOLN Idealarc Model R3S-325 Welding Power
Source, sn:AC467820
MISCELLANEOUS
BARBER-COLMAN #12 TYPE A GEAR HOBBING MACHINE
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or
Rig Items. Buyers May Pick Up Their Items
at the Auction Location or Can Arrange for a Third Party
Logistics Firm to Manage the Removal Precess for Them.
FELLOWS 6A GEAR SHAPER
6
Drill Presses ● Powermatic Disc / Belt Sander ●
Banding Carts ● Assorted Grinder ● Grinding Wheels
● Collets ● Drill Bits ● Reamers ● Center Drills ●
Lathe Tooling ● Shell Mills ● Steady Rests ● Clamps
● End Mills ● Tail Stocks ● Centers ● Universal
Tables ● Extra Chucks ● Vises ● Scales ● Tool
Holders ● Hoists ● Rod Iron Hydraulic Compressor ●
Rotary Tables ● Scrap Metal ● TROYKE Universal
Head with 12” Chuck ● Etc..
AUCTION SALE DATE & TIME – THURSDAY, NOVEMBER 20TH @ 10:00 A.M. EST
CINCINNATI BICKFORD
RADIAL DRILL PRESS
SUNNEN CV-616 KING AUTOMATIC
VERTICAL HONING MACHINE
HONING MACHINE
Download a lot book at
www.asset-sales.com
ASSORTED WELDING
7
i
A ss e t s in
to
D
la r
s
Tur
n
ur
Yo
ol
ng
Asset Sales, Inc.
Presorted
First Class Mail
U.S. Postage
PAID
Kokomo, IN
Permit No. 154
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com
Asset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003
1 of 2
POWERMATIC 87 VERTICAL BANDSAW
ABBREVIATED TERMS & CONDITIONS OF AUCTION
YOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY
BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT
YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE
BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer
at the time of the auction, any person participating in the auction shall be
bound by the following terms and conditions. The auctioneer does not
warrant the accuracy, authenticity, description, weight, count or measure
of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process
in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE
COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall
be removed unless paid in full and all articles purchased shall be removed in the time allocated by the auctioneer. No item, no matter how
small or how far the purchaser has to travel, may be removed until the
close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/
or a company check accompanied by a bank letter of guarantee payable
Rigging/Removal of sold equipment is the sole responsibility of the buyer
and must be completed by the posted date. Rigging/Removal may not begin
until payment has been made in full and the auction sale is complete. All
heavy rigging will require a certificate of insurance for $1,000,000.00
naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,”
“WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all
onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be pre-approved by Asset
Sales, Inc. The pre-approval process is easy, but necessary. Asset
Sales, Inc. will verify telephone number and confirm agreement to the
Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL
BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF
$5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
UPCOMING AUCTIONS
Thursday, November 6th - Finish Line Ind.
Garage Door Panel, Canopy Decking & Aluminum Fab. Facility
Onsite / Online
Conyers, GA
Thursday, November 13th - Fulton Industries Inc.
Late Model, Large Cap. CNC Machining Centers, Inspection & Tooling
Onsite / Online
Rochester, IN
Tuesday, November 18th - Wold Tool Engineering Inc.
Late Model / CNC & Screw Machine Shop
Online
Moosup, CT
DIRECTIONS
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All
bidders are responsible for all applicable taxes.
FROM CHARLOTTE DOUGLAS INT. AIRPORT:
Exit Airport onto US-74 W/Wilkinson Blvd. Turn left onto
the ramp to Interstate 485 Inner N/Spartanburg. Keep left
at the fork to continue on Exit 10B, follow signs for I-85 S/
Gastonia/Spartanburg & merge onto I-85S. Take exit 14
for NC-274N. Turn left onto NC-274 N/Bessemer City Rd
follow for 2.4 miles. Turn right onto E. Maine Ave. Turn
right onto N14th Street for 2 miles. Turn left onto Ramseur
Rd. Plant is on the left. Follow auction signs.
HOTELS
HOLIDAY INN EXPRESS WEST GASTONIA
1911 Broadcast St. - Gastonia, NC 28052
(704) 884-3300
HAMPTON INN GASTONIA
1859 Remount Rd - Gastonia, NC 28054
(704) 866-9090
PUBLIC AUCTION
SURPLUS TO THE NEEDS OF
CARSON MACHINE AUTOMATION
VERY CLEAN MACHINE SHOP
BESSEMER CITY, NC
THURSDAY, NOVEMBER 20TH
@ 10:00 A.M. EST