3 - Empire Door and Glass

Transcription

DOOR HARDWARE
TABBED PAGE
Index
Page
Bar Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Bifold Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-63
Bypass Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62
Cam Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Charley Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-47
Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Corbin Russwin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
Door Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 42
Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30
Flushbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 42
H-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-36
Hole Filler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Hollow Core Door Hardware . . . . . . . . . . . . . . . . . . 59, 60
Kickplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kwikset Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Latchlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 25
Latch Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49
Levers, Aluminum Doors . . . . . . . . . . . . . . . . . . . . . 24, 25
Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
Maildrop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Mail Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Mounting Brackets, Aluminum Doors . . . . . . . . . . 24
MS Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25
Paddle Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 25
Panel Door Hardware . . . . . . . . . . . . . . . . . . . . . . . . 61, 62
Panic Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-21
Patio Door Keepers . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Patio Door Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Patio Door Handles . . . . . . . . . . . . . . . . . . . . . . . . . . 50-52
Patio Door Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-58
Patio Door Tracks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pull Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Pull Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Push Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Push - in Weatherstrip . . . . . . . . . . . . . . . . . . . . . . . 66
Push Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Reinforcing Pivots. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Schlage Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Screen Door Keepers. . . . . . . . . . . . . . . . . . . . . . . . . 50
Screw - on Weatherstrip . . . . . . . . . . . . . . . . . . . . . 66
Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Silencers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Strike Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 24
Surface Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Sweeps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Uscan Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2
Viewers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Wall Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Weatherstrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-66
Wraparound Plates . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USCAN LOCKSETS
GRADE 2
GRADE 1
Cylindrical Knob Locksets
Cylindrical Lever Locksets
• Supplied with a 6 pin cylinder, SC1
keyway, and will accept ASSA, ILCO,
MEDECO and SCHLAGE cylinders.
2 3/4" Backset - Stainless Steel
UC
UC
UC
UC
UC
UC
UC
UC
Product Number
K110S-O-630
Passage
K140S-O-630
Privacy
K150D-O-630
Entrance
K150IC-630
Entrance
K170D-O-630
Classroom
K180D-O-630
Storeroom
K180D-O-613
Storeroom
K180IC-630
Storeroom
with 3 1/2" Rose Diameter
With Clutch
• 6 pin cylinder supplied (SC1 keyway),
& will accept ASSA, ILCO, MEDECO
and SCHLAGE cylinders.
• Models prepped for IC core will
accept cores from Arrow, Best,
Falcon, & KSP
• 2 3/4" backset standard
www.empiredoorandglass.com
Phone: (612) 729-4003
Deadbolts
6 Way
Adjustable
SC1
Product Number
UC D130-605
Single
UC D130-609
Single
UC D130-613
Single
UC D130-IC-613
Single
UC D130-630
Single
UC D130-IC-630
Single
UC D230-605
Double
UC D230-609
Double
UC D230-613
Double
UC D230-IC-613
Double
UC D230-630
Double
UC D230-IC-630
Double
[email protected]
page 1
Fax: (612) 729-4216
y
Product Number
UC USL212S-605
Passage
UC USL212S-613
Passage
UC USL212S-626
Passage
UC USL212S(2 ⅜")-626 Passage
UC USL242S-605
Privacy
UC USL242S-613
Privacy
UC USL242S-626
Privacy
UC USL242S(2 ⅜")-626 Privacy
UC USL252D-IC-613
Entrance IC
UC USL252D-IC-626
Entrance IC
UC USL252D-605
Entrance
UC USL252D-613
Entrance
UC USL252D-626
Entrance
UC USL252D(2 ⅜")-626 Entrance
UC USL272D-IC-613
Classroom IC
UC USL272D-IC-626
Classroom IC
UC USL272D-605
Classroom
UC USL272D-613
Classroom
UC USL272D-626
Classroom
UC USL272D(2 ⅜")-626 Classroom
UC USL282D-IC-613
Storeroom IC
UC USL282D-IC-626
Storeroom IC
UC USL282D-605
Storeroom
UC USL282D-613
Storeroom
UC USL282D-626
Storeroom UC
USL282D(2 ⅜")-626
Storeroom
y
• Supplied with a 6 pin cylinder, SC1
keyway, and will accept ASSA, ILCO,
MEDECO and SCHLAGE cylinders.
• Models prepped for IC core will
accept cores from Arrow, Best,
Falcon, & KSP
2 3/4" Backset - Satin Chrome
Product Number
UC USL110S-613
Passage
UC USL110S-626
Passage
UC USL140S-626
Privacy
UC USL150D-613
Entrance
UC USL150D-626
Entrance
UC USL150D-IC-626
Entrance
UC USL170D-613
Classroom
UC USL170D-626
Classroom
UC USL170D-IC-626
Classroom
UC USL173D-626
Classroom
Security
UC USL180D-613
Storeroom
UC USL180D-626
Storeroom
UC USL180D-IC-626
Storeroom
With Clutch
• Supplied with a
6 pin cylinder,
SC1 keyway,
and will accept
ASSA, ILCO,
MEDECO and
SCHLAGE
Product Number
UC US10S-B-605-2-3/4
Passage
UC US10S-B-609-2-3/8
Passage
UC US10S-B-630-2-3/4
Passage
UC US10S-B-630-2-3/8
Passage
UC US40S-B-605-2-3/4
Privacy
UC US40S-B-609-2-3/8
Privacy
UC US40S-B-630-2-3/4
Privacy
UC US53P-B-613-2-3/4-KD Entrance
UCUS53P-B-609-2-3/4-KD Entrance
UC US53IC-630
Entrance
UC US70P-B-630-2-3/4-KD Classroom
UC US70IC-630
Classroom
UC US80P-B-605-2-3/4-KD Storeroom
UC US80IC-630
Storeroom
USCAN LOCKSETS
SPRINGLATCHES
US Series Grade 2 Knob
USL 200 Series Grade 2 Lever
Product Number
UC G2-2-3/4-SL-605
UC G2-2-3/4-SL-630
UC G2-2-3/8-SL-605
UC G2-2-3/8-SL-630
UC G2P-2-3/4-SL-626
Privacy
UC G2P-2-3/8-SL-626
Privacy
PLYMOUTH KNOBS
BACKSET EXTENSION
US Series Grade 2 Knob
USL Series Grade 2 Lever
Product Number
UC 57MM Extension for 5" Backset
Use with 2-3/4" latch
BOLTS
USL100 Series Grade 1 Levers
Product Number
UC G1SL-2-3/4-630
UC G1SL-2-3/8-630
UC G1SLP-2-3/4-630
UC G1SLP-2-3/8-630
G3DB4Wx605
9096
D Series
Product Number
UC G3DB4Wx605 Grade 3, 4-way Adj
UC 9096-605
Grade 2, 6-way Adj
UC 9096-630
Grade 2, 6-way Adj
2 3/4" BS Knobs
Product Number
UC US10S-PLY-605-2-3/4 Passage
UC US40S-PLY-605-2-3/4 Privacy
UC US40S-PLY-630-2-3/4 Privacy
UC US53P-PLY-605-2-3/4 Entrance
UC US70P-PLY-605-2-3/4 Classroom
GRADE 3
y
y
•
•
•
•
•
•
Cylindrical Knob Locksets
5 pin WR3 keyway, keyed different
Supplied with adjustable backset latch
5 pin KW1 keyway, keyed different
Supplied with adjustable backset latch
5 pin SC1 Keyway
Adj Latch
Product Number
UC K350D-B-605-SC1 Entrance
UC K380D-B-605-SC1 Storeroom
UC K380D-B-630-SC1 Storeroom
UC K310S-B-605 Passage
UC K340S-B-605 Privacy
UC K340S-B-609 Privacy
UC K350D-B-605 Entrance
UC K350D-B-609 Entrance
UC K410-605
Passage
UC K450-605-KW1 Entry
Deadbolts
• 4 Way Adjustable Bolt
• Weiser 1555 keyway, 5 pin KD
Product Number
UC D108-605-ADJ-MORT/DI Single
UC D208-605-ADJ-MORT/DI Double
• Kwikset keyway, 5 pin KD
• Round Corner Latch & Strike
Product Number
UC D108-605-KD-KW1 Single Brass
UC D208-605-KD-KW1 Double Brass
• Removable SC1 keyway cylinder
• Will accept ASSA, ILCO, and Medeco
cylinders
Product Number
Phone: (612) 729-4003
[email protected]
page 2
Fax: (612) 729-4216
SCHLAGE LOCKSETS
&3%2)%3,/#+3
"ELL"%,
'EORGIAN'%/
!CCENT!##
/RBIT/2"
0LYMOUTH0,9
%LAN%,!
&LAIR&,!
SPECIFYHANDING
SPECIFYHANDING
0!33!'%&5.#4)/.
%.42!.#%&5.#4)/.
3# &!##,(
3ATIN.ICKEL
,EFT(AND
3# &!##,(
3ATIN.ICKEL
,EFT(AND
3# &!##2(
3ATIN.ICKEL
2IGHT(AND
3# &!##2(
3ATIN.ICKEL
2IGHT(AND
3# &"%,
"RIGHT"RASS
3# &"%,
"RIGHT"RASS
3# &"%,
!NTIQUE"RASS
3# &"%,
"RIGHT"RASS
3# &%,!
"RIGHT"RASS
3# &"%,
!NTIQUE"RASS
3# &%,!
!NTIQUE"RASS
3# &&,!,(
"RIGHT"RASS
,EFT(AND
3# &%,!
3ATIN#HROME
3# &&,!2(
"RIGHT"RASS
2IGHT(AND
3# &&,!,(
"RIGHT"RASS
,EFT(AND
3# &'%/
"RIGHT"RASS
3# &&,!2(
2IGHT(AND
"RIGHT"RASS
3# &'%/
"RIGHT"RASS
3# &'%/
"RIGHT"RASS
3# &'%/
!NTIQUE"RASS
3# &'%/
!NTIQUE"RASS
3# &'%/
!NTIQUE"RASS
3# &'%/
!NTIQUE"RASS
3# &/2"
"RIGHT"RASS
3# &/2"
"RIGHT"RASS
3# &/2"
"RIGHT"RASS
3# &/2"
3ATIN#HROME
3# &/2"
!NTIQUE"RASS
3# &0,9
"RIGHT"RASS
3# &/2"
3ATIN#HROME
3# &0,9
3ATIN#HROME
3# &/2"
3ATIN#HROME
3# &0,9
"RIGHT"RASS
02)6!#9&5.#4)/.
3# &!##,(
3ATIN.ICKEL
,EFT(AND
3# &!##2(
2IGHT(AND
3# &0,9
3ATIN#HROME
3# &0,9
3ATIN#HROME
3ATIN.ICKEL
3# &"%,
"RIGHT"RASS
34/2%2//-&5.#4)/.
3# &"%,
!NTIQUE"RASS
3# &'%/
!NTIQUE"RASS
3# &%,!
"RIGHT"RASS
3# &/2"
3ATIN#HROME
3# &%,!
!NTIQUE"RASS
3# &0,9
"RIGHT"RASS
3# &%,!
3ATIN#HROME
3# &0,9
3ATIN#HROME
3# &&,!,(
"RIGHT"RASS
,EFT(AND
3# &&,!2(
2IGHT(AND
"RIGHT"RASS
3# &'%/
"RIGHT"RASS
3# 2
+WIKSET4ITAN
/RBIT+NOBS
3# &'%/
!NTIQUE"RASS
3# 2
+WIKSET4ITAN
/RBIT+NOBS
3# &'%/
!NTIQUE"RASS
3# 2
+WIKSET4ITAN
+NOBSEXCEPT/2"
3# &/2"
"RIGHT"RASS
3# 2
+WIKSET4ITAN
+NOBSEXCEPT/2"
3# &/2"
3ATIN#HROME
3# 7EISER
+NOBSEXCEPT/2"
3# &0,9
"RIGHT"RASS
3# 7EISER
+NOBSEXCEPT/2"
3# &0,9
3ATIN#HROME
3# 7EISER
/RBIT+NOBS
3# 7EISER
/RBIT+NOBS
#/-0%4)4/2+%97!90,5'3&/2&3%2)%3
"RIGHT"RASSs!NTIQUE"RASSs3ATIN"RONZEs/IL2UBBED"RONZEs3ATIN#HROME
Phone: (612) 729-4003
[email protected]
page 3
Fax: (612) 729-4216
SCHLAGE LOCKSETS
!3%2)%3
!.3)!3ERIES'RADE5,,ISTEDFORnHOURlREDOOR
'EORGIAN'%/
,EVON,%6
/RBIT/2"
0LYMOUTH0,9
4ULIP45,
0!33!'%,!4#(
%.42!.#%,/#+3
3# !3'%/
3# !,$'%/
,ESS#YL
3# !3'%/
3# !,$'%/
,ESS#YL
3# !3,%6
3# !,$/2"
,ESS#YL
3# !3,%6
3# !,$/2"
,ESS#YL
3# !3/2"
3# !,$/2"
,ESS#YL
3# !,$'%/
,ESS#YL
3# !3/2"
3# !,$/2"
,ESS#YL
3# !,$/2"
,ESS#YL
3# !3/2"
3# !,$0,9
,ESS#YL
3# !,$/2"
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$/2"
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$/2"
,ESS#YL
3# !,$45,
,ESS#YL
3# !,$0,9
,ESS#YL
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$45,
,ESS#YL
3# !3/2"
3# !30,9
BACKSET
3# !30,9
3# !30,9
3# !,$45,
#OMMUNICATING,OCKX"LANK0LATE
3# !,$0,9
34/2%2//-,/#+3
3# !30,9
3# !30,9
BACKSET
,ESS#YL
#,!332//-,/#+3
3# !345,
%8)4,/#+
3# !$0,9
02)6!#9,/#+3
3# !,$/2"
,ESS#YL
3# !,$/2"
,ESS#YL
3# !,$/2"
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$0,9
,ESS#YL
3# !,$0,9
,ESS#YL
!
0ASSAGE,ATCH
"OTHKNOBSALWAYSUNLOCKED
!
%XIT,OCK
"LANK PLATE OUTSIDE )NSIDE KNOB ALWAYS UNLOCKED
3PECIFYDOORTHICKNESSOR
!
"ATH"EDROOM0RIVACY,OCK
0USHBUTTONLOCKING#ANBEOPENEDFROMOUTSIDEWITH
SMALLSCREWDRIVERORmATNARROWTOOL4URNINGINSIDE
KNOBORCLOSINGDOORRELEASESBUTTON
3# !3'%/
3# !3,%6
3# !3,%6
3# !3/2"
3# !3/2"
3# !3/2"
3# !3/2"
3# !30,9
3# !345,
All
keyed functions are supplied less cylinder.
!LLKEYEDFUNCTIONSARESUPPLIEDLESSCYLINDER
We
recommend the 40-100 multi-tailpiece
$OYLE3ECURITY0RODUCTSRECOMMENDSTHE
cylinder
(purchase separately). See Cylinders
MULTITAILPIECECYLINDERPURCHASESEPARATELY
Section.
3EE#YLINDERS3ECTION
!LLLOCKSARESUPPLIEDWITHABACKSETLATCH
ANDAX!.3)STRIKENOBOX
UNLESSOTHERWISESPECIlEDASFOLLOWS
,OCKSSTOCKEDWITHABACKSETLATCHARE
PACKEDWITHAXSQUARECORNER
4STRIKEBOX
!
%NTRANCE,OCK
0USHING AND TURNING BUTTON LOCKS OUTSIDE KNOB
REQUIRING USE OF A KEY UNTIL BUTTON IS MANUALLY
UNLOCKED
0USHBUTTONLOCKING0USHINGBUTTONLOCKSOUTSIDE
KNOBUNTILUNLOCKEDBYKEYORTURNINGINSIDEKNOB
!
#LASSROOM,OCK
/UTSIDEKNOBLOCKEDANDUNLOCKEDBYKEY
)NSIDEKNOBALWAYSUNLOCKED
!
#OMMUNICATING,OCK7ITH"LANK0LATE
,OCKEDORUNLOCKEDBYKEYFROMOUTSIDE
"LANKPLATEINSIDE
!
3TOREROOM,OCK
/UTSIDEKNOBlXED%NTRANCEBYKEYONLY
)NSIDEKNOBALWAYSUNLOCKED
Phone: (612) 729-4003
[email protected]
page 4
Fax: (612) 729-4216
SCHLAGE LOCKS
!,3%2)%3
!.3)!3ERIES'RADE5,,ISTEDFORnHOURlREDOOR
.EPTUNE.%0
3ATURN3AT
0!33!'%,!4#(
%.42!.#%,/#+3
34/2%2//-,/#+3
3# !,3.%0
3# !,,$.%0
3# !,,$.%0
3# !,3.%0
3# !,,$.%0
3# !,,$.%0
3# !,33!4
3# !,,$3!4
3# !,,$3!4
3# !,33!4
3# !,,$3!4
3# !,,$3!4
3# !,33!4
3# !,,$3!4
3# !,,$3!4
3# !,33!4
3# !,,$3!4
3# !,,$3!4
3# !,33!4
3# !,,$3!4
3).',%$5--942)-
#,!332//-,/#+3
3# !,3!4
3# !,,$.%0
!,3
0ASSAGE,ATCH
"OTHLEVERSALWAYSUNLOCKED
!,
3INGLE$UMMY4RIM
$UMMYTRIMFORONESIDEOFDOOR5SEDFORDOORPULL
ORASMATCHINGINACTIVETRIM
3# !,,$.%0
3# !,,$3!4
%8)4,/#+
!,$
%XIT,OCK
"LANKPLATEOUTSIDE)NSIDELEVERALWAYSUNLOCKED
3# !,,$3!4
3# !,,$3!4
3# !,$3!4
!,
SMALLSCREWDRIVERORmATNARROWTOOL4URNINGINSIDE
LEVERORCLOSINGDOORRELEASESBUTTON
3# !,,$3!4
02)6!#9,/#+3
3# !,3.%0
3# !,3.%0
3# !,33!4
All
keyed functions are supplied less cylinder.
We
recommend
the 40-100
multi-tailpiece
$OYLE
3ECURITY 0RODUCTS
RECOMMENDS
THEcylinder
(purchase
separately). See Cylinders Section.
3# !,33!4
3# !,33!4
3EE#YLINDERS3ECTION
3# !,33!4
(/30)4!,02)6!#9,/#+3
!LLLOCKSARESUPPLIEDWITHABACKSETLATCHAND
AX!.3)STRIKENOBOX
!,3
(OSPITAL0RIVACY,OCK
0USHBUTTONLOCKING5NLOCKEDFROMOUTSIDEBYTURNING
EMERGENCYTURNBUTTON4URNINGINSIDELEVERORCLOSING
DOORRELEASESBUTTON
!,
%NTRANCE,OCK
0USHINGANDTURNINGBUTTONLOCKSOUTSIDELEVERREQUIRING
USEOFAKEYUNTILBUTTONISMANUALLYUNLOCKED
KNOBUNTILUNLOCKEDBYKEYORTURNINGINSIDELEVER
!,
#LASSROOM,OCK
/UTSIDELEVERLOCKEDANDUNLOCKEDBYKEY
)NSIDELEVERALWAYSUNLOCKED
3# !,33!4
!,
3TOREROOM,OCK
/UTSIDE LEVER FIXED %NTRANCE BY KEY ONLY
)NSIDELEVERALWAYSUNLOCKED
Phone: (612) 729-4003
[email protected]
page 5
Fax: (612) 729-4216
SCHLAGE LOCKS
%842!(%!69$549
,%33#9,).$%2"3342)+%
.
45"5,!2,%6%2
0!33!'%,!4#(
3#,.
www.schlage.com
,3%2)%3-/24)3%,/#+3
/&&)#%,/#+
3#,,.
#,!332//-,/#+
3#,,.
3#,,"
#HASSIS/NLY
34/2%2//-,/#+
3#,,.
3#,,"
#HASSIS/NLY
%.42!.#%,/#+
3#,,.
3#,,"
#HASSIS/NLY
#/22)$/2,/#+
3#,,.
,
0ASSAGE,ATCH
,ATCHBOLTRETRACTEDBYLEVERORKNOBFROMEITHERSIDEATALLTIMES
,
/FlCEAND)NNER%NTRY,OCK
,ATCHBOLTRETRACTEDBYKNOBLEVERFROMEITHERSIDEUNLESSOUTSIDEISMADE
INOPERATIVEBYKEYOUTSIDEORBYTURNINGINSIDETHUMBTURN7HENOUTSIDEISLOCKED
LATCHBOLTISRETRACTEDBYKEYOUTSIDEORBYKNOBLEVERINSIDE/UTSIDEKNOBLEVER
REMAINSLOCKEDUNTILTHUMBTURNISRETURNEDTOVERTICALORUNLOCKEDBYKEY!UXILIARY
LATCHDEADLOCKSLATCHBOLTWHENDOORISCLOSED
,
#LASSROOM,OCK
,ATCHBOLTRETRACTEDBYKNOBLEVERFROMEITHERSIDEUNLESSOUTSIDEISLOCKEDBYKEY
5NLOCKEDFROMOUTSIDEBYKEY)NSIDEKNOBLEVERALWAYSFREEFORIMMEDIATEEXIT
!UXILIARYLATCHDEADLOCKSLATCHBOLTWHENDOORISCLOSED
,
3TOREROOM,OCK
,ATCHBOLTRETRACTEDBYKEYOUTSIDEORBYKNOBLEVERINSIDE/UTSIDEKNOBLEVER
ALWAYSINOPERATIVE!UXILIARYLATCHDEADLOCKSLATCHBOLTWHENDOORISCLOSED
,
%NTRANCE,OCK
,ATCHBOLTRETRACTEDBYKNOBLEVERFROMEITHERSIDEUNLESSOUTSIDEISLOCKEDBY
DEGREEROTATIONOFTHUMBTURN$EADBOLTTHROWNORRETRACTEDBYDEGREEROTATION
OFTHUMBTURN7HENLOCKEDKEYOUTSIDEORKNOBLEVERINSIDERETRACTSDEADBOLT
ANDLATCHBOLTSIMULTANEOUSLY/UTSIDEKNOBLEVERREMAINSLOCKEDUNTILTHUMBTURN
ISRESTOREDTOVERTICALPOSITION4HROWINGDEADBOLTAUTOMATICALLYLOCKSOUTSIDE
KNOBLEVER!UXILIARYLATCHDEADLOCKSLATCHBOLTWHENDOORISCLOSED
,
#ORRIDOR,OCK
,ATCHBOLTRETRACTEDBYKNOBLEVERFROMEITHERSIDE$EADBOLTTHROWNORRETRACTED
BYKEYOUTSIDEORINSIDETHUMBTURN4HROWINGDEADBOLTLOCKSOUTSIDEKNOBLEVER
4URNINGINSIDEKNOBLEVERSIMULTANEOUSLYRETRACTSDEADBOLTANDLATCHBOLTAND
UNLOCKSOUTSIDEKNOBLEVER
www.D
Phone: (612) 729-4003
[email protected]
page 6
Fax: (612) 729-4216
SCHLAGE LOCKS
!.3)!3ERIES'RADE,EVERS
$3%2)%3
/MEGA/-%
2HODES2(/
3PARTA30!
0!33!'%,!4#(n,%6%23
%.42!.#%,/#+n,%6%23
#,!332//-,/#+n,%6%23
3# .$32(/
3# .$"$2(/
3# .$,$2(/
3# .$32(/
3# .$,$/-%
3# .$,$2(/
3# .$32(/
3# .$,$2(/
3# .$,$2(/
3# .$32(/
3# .$,$2(/
3# .$,$30!
3# .$330!
3# .$,$2(/
34/2%2//-,/#+n,%6%23
3# .$,$2(/
%8)4,/#+n,%6%23
3# .$,$30!
3# .$$2(/
6%34)"5,%,/#+n,%6%23
3# .$,$2(/
3# .$,$2(/
3# .$,$2(/
"!4("%$2//-02)6!#9,%6%23
3# .$,$30!
3# .$#$2(/
3# .$#$30!
%,%#42)#!,,9,/#+%$n,%6%23
3# .$32(/
34/2%$//2,/#+n,%6%23
3# .$32(/
3# .$32(/
3# .$,$%,2(/$ ,ESS#YL
3# .$330!
3# .$#$2(/
%,%#42)#!,,95.,/#+%$n,%
6%23
ELECTRICALLY
UNLOCKED - LEVERS
All keyed functions are supplied less cylinder.
$OYLE3ECURITY0RODUCTSRECOMMENDSTHE
We recommend the 40-100 multi-tailpiece cylinder
(purchase separately). See Cylinders Section.
3EE#YLINDERS3ECTION
3# .$,$%52(/$ ,ESS#YL
3# .$,$%52(/$ ,ESS#YL
All locks are supplied with a 2 3/4” backset latch and
!LLLOCKSARESUPPLIEDWITHABACKSETLATCHANDA
a 10-025 1 1/4” x 4 7/8” ANSI strike (no box).
X!.3)STRIKENOBOX
).34)454)/.,/#+,%6%23
3# .$#$2(/
$3%2)%3
!.3)!3ERIES'RADE,EVERS
6ANDL'ARD%NTRACE,EVER
6ANDL'ARD#LASSROOM,EVER
6ANDL'ARD3TOREROOM,EVER
3# .$,$2(/
3# .$,$2(/
3# .$,$2(/
,ESS#YLINDER
,ESS#YLINDER
"RIGHT"RASSs3ATIN"RONZEs/IL2UBBED"RONZEs3ATIN#HROME
Phone: (612) 729-4003
[email protected]
page 7
Fax: (612) 729-4216
,ESS#YLINDER
SCHLAGE LOCKS
$3%2)%3
!.3)!3ERIES'RADE+NOBS
All keyed functions are supplied less cylinder.
$OYLE3ECURITY0RODUCTSRECOMMENDSTHEMULTI
We recommend the 40-100 multi-tailpiece cylinder
TAILPIECECYLINDERPURCHASESEPARATELY
(purchase separately). See Cylinders Section.
3EE#YLINDERS3ECTION
All locks are supplied with a 2 3/4” backset latch and
!LLLOCKSARESUPPLIEDWITHABACKSETLATCHANDA
a 10-025 1 1/4” x 4 7/8” ANSI strike (no box).
X!.3)STRIKENOBOX
/RBIT/2"
0LYMOUTH0,9
0!33!'%,!4#(n+./"3
%.42!.#%,/#+n+./"3
#,!332//-,/#+n+./"3
3# $3/2"
3# $,$/2"
3# $,$/2"
3# $30,9
3# $,$0,9
3# $,$0,9
%8)4,/#+n+./"3
6%34)"5,%,/#+n+./"3
34/2%2//-,/#+n+./"3
3# $$0,9
3# $#$0,9
3# $,$/2"
3# $,$0,9
34/2%$//2,/#+n+./"3
).34)454)/.,/#++./"3
3# $#$0,9
3# $#$0,9
$
0ASSAGE,ATCH
"OTHSIDESALWAYSUNLOCKED
$
3TOREROOM,OCK
/UTSIDElXED%NTRANCEBYKEYONLY
)NSIDEALWAYSUNLOCKED
$
%XIT,OCK
"LANKPLATEOUTSIDE)NSIDEALWAYSUNLOCKED
$
)NSTITUTION,OCK
"OTHSIDESlXED%NTRANCEBYKEYFROMEITHERSIDE
#AUTION$OUBLECYLINDERLOCKSONRESIDENCESAND
ANYDOORINANYSTRUCTUREWHICHISUSEDFOREGRESSARE
ALIFESAFETYHAZARDINTIMESOFEMERGENCYANDTHEIR
USEISNOTRECOMMENDED)NSTALLATIONSHOULDBEIN
ACCORDANCEWITHEXISTINGCODESONLY
$
SMALLSCREWDRIVERORmATNARROWTOOL4URNINGINSIDEOR
CLOSINGDOORRELEASESBUTTON
$
%NTRANCE,OCK
0USHINGANDTURNINGBUTTONLOCKSOUTSIDEREQUIRINGUSE
OFAKEYUNTILBUTTONISMANUALLYUNLOCKED
UNTILUNLOCKEDBYKEYORTURNINGFROMINSIDE
.$
6ANDLGARD%NTRANCE,OCK
4URN0USHBUTTONLOCKINGPUSHINGANDTURNINGBUTTON
DISENGAGESOUTSIDELEVERREQUIRINGUSEOFKEYUNTIL
BUTTONISMANUALLYUNLOCKED
0USHBUTTONLOCKINGPUSHINGBUTTONDISENGAGES
OUTSIDELEVERUNTILUNLOCKEDBYKEYORBYTURNINGINSIDE
LEVER6ANDLGARDISDESIGNEDTODISENGAGEOUTSIDE
SPINDLEFROMLATCHWHENINLOCKEDCONDITION
$
6ESTIBULE,OCK
,ATCHRETRACTEDBYKEYFROMOUTSIDEWHENOUTSIDEIS
LOCKEDBYKEYFROMINSIDE
.$
6ANDLGARD#LASSROOM,OCK
/UTSIDELEVERDISENGAGEDANDUNLOCKEDBYKEY)NSIDE
LEVERALWAYSUNLOCKED6ANDLGARDISDESIGNEDTO
DISENGAGEOUTSIDESPINDLEFROMLATCHWHENINLOCKED
CONDITION
$
3TORE,OCK
+EYINEITHERSIDELOCKSORUNLOCKSBOTHSIDES
#AUTION$OUBLECYLINDERLOCKSONRESIDENCESAND
ANYDOORINANYSTRUCTUREWHICHISUSEDFOREGRESSARE
ALIFESAFETYHAZARDINTIMESOFEMERGENCYANDTHEIR
USEISNOTRECOMMENDED)NSTALLATIONSHOULDBEIN
ACCORDANCEWITHEXISTINGCODESONLY
.$
6ANDLGARD3TOREROOM,OCK
/UTSIDELEVERALWAYSDISENGAGED%NTRANCEBYKEY
ONLY)NSIDELEVERALWAYSUNLOCKED6ANDLGARDIS
DESIGNEDTODISENGAGEOUTSIDESPINDLEFROMLATCH
WHENINLOCKEDCONDITION
$
#LASSROOM,OCK
/UTSIDELOCKEDANDUNLOCKEDBYKEY
Phone: (612) 729-4003
[email protected]
page 8
Fax: (612) 729-4216
SCHLAGE LOCKS
&%NTRANCE,OCK
$EADBOLTTHROWNOR
RETRACTEDBYKEYFROM
OUTSIDEORBYINSIDETURN
UNIT,ATCHRETRACTEDBY
THUMBPIECEFROMOUTSIDE
ORBYINSIDEKNOB
g
&,).%(!.$,%3%43
/UTSIDE4RIM8)NSIDE+NOB
0ARTHENON0!2
0LYMOUTH0,9
0LYMOUTH0,9
'EORGIAN'%/
3#&0!2'%/
/RBIT/2"
3#&0,9/2"
0LYMOUTH0,9
3#&0,90,9
(3%2)%3).4%2#/..%#4).',/#+
(
(
y
y
%NTRANCE3INGLE,OCKING
s $EADBOLTTHROWNORRETRACTEDBYKEYINUPPERLOCKFROM
OUTSIDEORBYINSIDETURNUNIT
s "OLTAUTOMATICALLYDEADLOCKSWHENFULLYTHROWN
s ,ATCHBOLTRETRACTEDBYKNOBLEVERFROMEITHERSIDE
s )NSIDEKNOBLEVERRETRACTSDEADBOLTANDDEADLATCH
SIMULTANEOUSLYFORIMMEDIATEEXIT
%NTRANCE$OUBLE,OCKING
s $EADBOLTTHROWNORRETRACTEDBYKEYINUPPERLOCK
FROMOUTSIDEORBYINSIDETURNUNIT
s "OLTAUTOMATICALLYDEADLOCKSWHENFULLYTHROWN
s $EADLATCHRETRACTEDBYKEYINOUTERKNOBWHEN
LOCKEDBYPUSHINGTURNBUTTONININNERKNOB
s /UTERKNOBMAYBElXEDINLOCKEDPOSITIONBYROTAT
INGTURNBUTTON
s )NSIDEKNOBRETRACTSDEADBOLTANDDEADLATCHSIMULTA
NEOUSLYFORIMMEDIATEEXIT
3)NGLE,OCKING%NTRANCE&UNCTION
$OUBLE,OCKING%NTRANCE&UNCTION
3# (0,9
3# (0,9
3# (0,9
3# (0,9
3# (,%6
3# (,%6
,%6/.
0,9-/54(
Phone: (612) 729-4003
[email protected]
page 9
Fax: (612) 729-4216
SCHLAGE DEADBOLTS
B500 SERIES
B600 SERIES
3TEEL-OUNTING0LATE
Commercial Grade 1 Deadbolt
(ARDENED3TEEL"ALLS
3OLID"RASS/R
"RONZE4RIM2ING
%RGONOMIC4HUMBTURN
g
-M(IGHSTRENGTH3TEEL!LLOY"OLT
7ITH!NTI3AW0IN
Introducing the B500-Series deadbolt
from Schlage, a revolutionary new
deadbolt that delivers higher security,
tougher performance and the ultimate
in installation versatility. Designed by
locksmiths for locksmiths, the B500Series deadbolt can be fitted with any
Schlage cylinder, fits virtually every door
you service, enhances lock strength on
the jamb side of the door, and will change
forever the way you look at deadbolts.
Classic "C" Keyway
Single Cylinder Deadbolt Lock
Product Number
SC B560P-605-C
SC B560P-605-KA4-C
SC B560P-609-C
SC B560P-609-KD-C
SC B560P-609-KA4-C
SC B560P-612-C
SC B560P-613-C
SC B560P-619-C
SC B560P-626-C
SC B560P-626-KA4-C
SC B563P-626-C
Everest Keyway Single Cylinder
Deadbolt Lock KD C123
Product Number
SC B560P-605-C123
SC B560P-609-C123
SC B560P-626-C123
Double Cylinder Deadbolt Lock
Product Number
B562P-605-C
B562P-609-C
B562P-626-C
B562P-626-KA4-C
Door Bolt Occupancy Indicator
Door Bolt (No Outside Trim)
Product Number
SC B580-605
SC B580-626
-ETAL3HIELD
"3ERIES#YLINDER3TANDARD
3OLID"RASS0IN
"3ERIES#YLINDER
0RIMUS#ONTROLLED!CCESS
MM4HROUGHBOLTS
7ITH#ONCEALED3CREWS/N
$OUBLE#YLINDER6ERSIONS
4AMPER2ESISTANT3CREWS
!VAILABLE
B660P
Single Cylinder Deadbolt Lock
Deadbolt thrown or retracted by key
from outside or by inside turn unit. Bolt
automatically deadlocks when fully
thrown.
SC
SC
SC
SC
Everest Keyway Single Cylinder
Deadbolt Lock KD C123
Product Number
SC B660P-626-C123
2-3/4" Backset
"3ERIES#YLINDER
0RIMUS(IGH3ECURITY
5,,ISTED
Screw Pack
over 1-3/4" to 2-1/4"
Product Number
61-501-605
For B560
61-501-626
For B560
61-503-605
For B562
61-503-626
For B562
Keypad Deadbolt Latch
with Triple Option Faceplates
Product Number
SC 12-287-605 Deadbolt Latch
Classic "C" Keyway Single Cylinder
Deadbolt Lock KA4 C
Product Number
SC B660P-605-KA4-C 2-3/4" Backset
SC B660P-626-KA4-C* 2-3/8" Backset
Deadbolt Square Corner 2 3/8"
2 3/4" Adjustable
Product Number
B662P
Double Cylinder Deadbolt Lock
Deadbolt thrown or retracted by key
from outside or by inside turn unit. Bolt
automatically deadlocks when fully
thrown.
Classic "C" Keyway Double Cylinder
Deadbolt Lock KA4 C
Product Number
Phone: (612) 729-4003
Deadbolt Drive-In 2 3/8"
2 3/4" Adjustable
Product Number
[email protected]
page 10
Fax: (612) 729-4216
y
Product Number
SC B571-626
7ITH-M3CREWS
y
SC
SC
SC
SC
7OOD&RAME2EINFORCER
KWICKSET KNOBLOCKS
Number / Model
Design / Function
200 Passage
For all interior doors where a simple latch is all that is required. Plain
knob or lever on both sides. Turning either knob or lever will retract
latch bolt at all times to open door.
300 Bed/Bath
300 Bathroom
For bedroom or bathroom doors. Turn button in interior knob or lever.
Turning button locks both knobs or levers . Lock may be opened by an
emergency entry key in exterior knob or lever. For bathroom models,
indicate U.S. 26 finish on interior knob or lever.
400 Entry
Entry lockset for keyed exterior doors. Key from exterior and turn
button in interior will lock or unlock exterior knob or interior knob or
lever.
KS 300T
KS
KS
KS
KS
KS
Part Number - (TYLO DESIGN)
200T-3-SCAL-SCS
300T-3-SCAL-SCS
300T-5-SCAL-SCS
400T-3-SCAL-SCS-K2
400T-5-SCAL-SCS-K2
Finishes:
US3 BRASS
US5 ANT. BRASS
US26D SATIN CHROME
KS 200T
MAXIMUM SECURITY
NUMBER
MODEL
FUNCTION
660 Standard Duty
Single Cylinder Deadlock
Key retracts bolt from exterior, turnpiece
operates bolt from interior.
665 Standard Duty
Double Cylinder Deadlock
Key retracts bolt from exterior, and
interior.
Part Number - (Single Cylinder)
KS 660-3-SCAL-SCS-K2
KS 660-3-RFAL-SCS-K2
KS 660-5-RFAL-SCS-K2
Part Number - (Double Cylinder)
ACCESSORIES
KS 214-3
Large Modernization Kit
Consists of two trim plates,
(3-1/2” x 10-1/2”) and latch and
strike plate, for covering
old style mortise locks. Brass.
Round Rosette
3-13/16" for 2-3/8"
or 2-3/4" backset.
KS 215-3
Small Modernization Kit
Consists of two trim plates,
(3-3/8” x 7-1/4”) and latch and
strike plate. Brass.
If you do not see the part you need, please send a sample or call our customer service department.
Phone: (612) 729-4003
[email protected]
page 11
Fax: (612) 729-4216
CORBIN RUSSWIN
ML 2000 Series (Less Cylinders)
Mortise Locksets
Armored front
conceals lock
mounting
screws and onepiece heavygauge steel
front
Features
Handing
Handed; quick reversible.
The lockset can be re-handed
without disassembling the
lock case.
Door Thickness
1-3/4” standard.
Backset
2-3/4” standard.
Lock Case
Heavy-gauge chrome plated
steel, 5-7/8” x 4” x 15/16”.
Front
Heavy-gauge steel, 8” x 1-1/4”
x -3/32”. Accommodates
flat doors and doors beveled
1/8” in 2”. Furnished 1-1/16”
wide for 1-3/8” doors.
Latchbolt
2-piece mechanical with antifriction insert, 5/8” x 1” x 3/4”
throw.
Auxiliary Latchbolt
9/16” effective throw and 3/8”
effective auxiliary latch
deadlocking.
Strike
Wrought brass or bronze, ANSI
straight lip standard, 4-7/8” x 11/4” x 1-1/8” lip to center.
Patented latchtail
enables easy
handing changes
1” throw,
one-piece
deadbolt meets
security Grade 1
Heavy-gauge
internal parts
provide security,
reliability, and
durability
Heavy-duty 3/4”
throw latchbolt
with stainless
steel insert
provides positive
secure latching
Lustra
Global
Complies with codes requiring lever to return to within 1/2”
(13mm) of door face. Brass, bronze or stainless steel.
Brass, bronze or stainless steel.
LWA
LWM
GWC
Lever: Wrought
Rose: Wrought
Lever: Wrought
Escutcheon: Wrought
Knob: Wrought
Rose: Wrought reinforced
Part Number
(PASSAGE)
RW ML2010-GWM-626
RW ML2010-LWA-630
RW ML2010-LWM-626
(ENTRANCE & APARTMENT)
RW ML2048-GWM-626-LC
RW ML2048-LWA-630-LC
RW ML2048-LWM-626-LC
(ENTRANCE & OFFICE)
RW ML2051-GWC-626-LC
GWM
Knob: Wrought reinforced
Escutcheon: Wrought
RW
RW
RW
RW
Part Number
(CLASSROOM)
ML2055-GWC-626-LC
ML2055-GWM-626-LC
ML2055-LWA-630-LC
ML2055-LWM-626-LC
Part Number
(DORMITORY OR ENTRANCE)
RW
RW
RW
RW
(STOREROOM & CLOSET)
ML2057-GWC-626-LC
ML2057-GWM-626-LC
ML2057-LWA-630-LC
ML2057-LWM-626-LC
(APARTMENT OR DORMITORY)
Phone: (612) 729-4003
[email protected]
page 12
Fax: (612) 729-4216
CORBIN RUSSWIN
ML 2000 SERIES LOCKSETS
LL = Lock Case Only for Levers
Product No.
Outside - Inside
Type
RW ML2010-LL-626
Passage
or
Closet
RW ML2022-LL-626
Description
• Latchbolt by grip either side.
• Both grips always free.
• Latchbolt by grip* either side.
• Deadbolt by key either side.
Store
Door
RW ML2030-LL-626
Privacy
Bedroom
or
Bathroom
RW ML2048-LL-626
Entrance
or
Apartment
RW ML2051-LL-626
Entrance
or
Office
• Deadbolt by thumbturn lever inside or by emergency
release tool outside.
• Inside grip simultaneously retracts latchbolt and deadbolt.
• Latchbolt* by key outside or by grip either side, unless
outside grip is locked by toggle-action stop.
• Deadbolt by key outside or by thumbturn lever inside.
• Inside grip always free.
• Latchbolt by key outside or by grip either side, unless
outside grip is locked by toggle-action stop.
• Auxiliary latch deadlocks latchbolt.
RW ML2055-LL-626
• Latchbolt by grip either side, unless outside grip is
locked by key outside.
Classroom
RW ML2057-LL-626
• Latchbolt by grip inside or by key outside.
• Outside grip always rigid.
Storeroom
or
Closet
RW ML2065-LL-626
Dormitory
or
Entrance
RW ML2067-LL-626
• Inside grip simultaneously retracts latchbolt and deadbolt.
• Latchbolt by grip either side, unless outside grip is
locked by toggle-action stop or by projection of deadbolt.
• Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked.
* When lever handles are furnished, both outside and inside are locked when deadbolt is projected.
Phone: (612) 729-4003
[email protected]
page 13
Fax: (612) 729-4216
WRAP AROUND PLATES
Part #
For Cylindrical Door Locks With 2 1/8” Hole
Backset
Door
Dimensions
Finish
DJ 2-AB-CW
DJ 2-PB-CW
DJ 2-S-CW
DJ 4-AB-CW
DJ 4-BZ-CW
DJ 4-PB-CW
DJ 4-S-CW
2 3/8”
1 3/4”
4” X 9”
Antique Brass
2 3/8”
1 3/4”
4” X 9”
Polished Brass
2 3/8”
1 3/4”
4” X 9”
Stainless Steel
2 3/4”
1 3/4”
4 1/4” X 9”
Antique Brass
2 3/4”
1 3/4”
4 1/4” X 9”
Bronze
2 3/4”
1 3/4”
4 1/4” X 9”
Polished Brass
2 3/4”
1 3/4”
4 1/4” X 9”
Stainless Steel
For Use With Heavy Duty Grade 1 & Grade 2 Key-In-Levers
DJ 4-BZ-2-CW
2 3/4”
1 3/4”
4 3/4” X 9”
Bronze
DJ 4-PB-2-CW
2 3/4”
1 3/4”
4 3/4” X 9”
Polished Brass
DJ 4-S-2-CW
2 3/4”
1 3/4”
4 3/4” X 9”
Stainless Steel
For Deadbolts With 1 1/2” Hole
DJ 6-AB-CW
2 3/8”
1 3/4”
4” X 4 1/2”
Antique Brass
DJ 6-PB-CW
2 3/8”
1 3/4”
4” X 4 1/2”
Polished Brass
DJ 6-S-CW
2 3/8”
1 3/4”
4” X 4 1/2”
Stainless Steel
DJ 8-AB-CW
2 3/4”
1 3/4”
4 1/4” X 4 1/2” Antique Brass
DJ 8-BZ-CW
2 3/4”
1 3/4”
4 1/4” X 4 1/2” Bronze
DJ 8-PB-CW
2 3/4”
1 3/4”
4 1/4” X 4 1/2” Polished Brass
DJ 8-S-CW
2 3/4”
1 3/4”
4 1/4” X 4 1/2” Stainless Steel
For Double Lock Combination Locksets with 2 1/8” holes with 3 5/8” centers
DJ 261-AB-CW 2 3/8”
1 3/4”
4” X 9”
Antique Brass
DJ 261-PB-CW 2 3/8”
1 3/4”
4” X 9”
Polished Brass
For Double Lock Combination Locksets with 1 1/2” Hole on Top
and 2 1/8” Hole on Bottom with 4” Centers
DJ 264-AB-CW 2 3/8”
1 3/4”
4” x 9”
Antique Brass
DJ 264-PB-CW 2 3/8”
1 3/4”
4” x 9”
Polished Brass
DJ 264-S-CW
2 3/8”
1 3/4”
4” x 9”
Stainless Steel
For Double Lock Combination Locksets with 2 1/8” holes with 3 5/8” centers
DJ 261-AB-CW 2 3/4”
1 3/4”
4 1/4” X 9”
Polished Brass
DJ 261-PB-CW 2 3/8”
1 3/4”
4” x 9”
Stainless Steel
For Double Lock Combination Locksets with 1 1/2” Hole on Top
and 2 1/8” Hole on Bottom with 4” Centers
DJ 484-AB-CW 2 3/4”
1 3/4”
4 1/4” X 9”
Antique Brass
DJ 484-PB-CW
2 3/4”
1 3/4”
4 1/4” X 9”
Polished Brass
DJ 484-S-CW
2 3/4”
1 3/4”
4 1/4” X 9”
Stainless Steel
DJ 10-FE
4-2-CW
261-CW
481-CW
6-CW
8-CW
264-CW
484-CW
DJ 20-FE
Door Reinforcer
Door Reinforcer
For deadbolts and key-in-knob locks.
Door: 1 3/8” Dimensions: 4 1/2” x 1”
For deadbolts and key-in-knob locks.
Door: 1 3/4” Dimensions: 4 1/2” x 1”
Part Number
DJ 10-AB-FE
Antique Brass
DJ 10-PB-FE
Polished Brass
Part Number
DJ 20-AB-FE
Antique Brass
DJ 20-PB-FE
Polished Brass
DJ 20-S-FE
Stainless Steel
Phone: (612) 729-4003
2-CW
4-CW
[email protected]
page 14
Fax: (612) 729-4216
STRIKES
Available in US3 = Brass or US26D = dull chrome
Part #
FLS
Dimensions
2 1/4” x 1 1/4”
Part #
T2STRK
Dimensions
2 3/4” x 1 1/8”
Part #
TS
Dimensions
2 3/4” x 1 1/8”
6"
11"
775 Heavy Gauge Double Strike
3-5/8” to 4” Center
1-1/4” and 3” Long Screws, Secures Strike to
Stud. 3-5/8” to 4” Centers. 13 GA. (Carded)
1-1/2” Long Screws, Secures Strike to Stud. 13
GA. (Carded)
FINISH
Dimensions
4 7/8” x 1 1/4”
7-3/4"
760 Heavy Gauge
Deadbolt Strike 6” H
PRODUCT
NO.
Part #
ASAST
8"
765 Heavy Gauge
Deadbolt Strike 7-3/4” H
1-1/4” and 3” Long Screws, Secures Strike to Stud.
13 GA. (Carded)
BACK
SET
DOOR
THICKNESS
770 Heavy Gauge
Lip Strike
1-1/4” and 3” Long Screws, Secures Strike to Stud.
13 GA. (Carded)
OVERALL
SIZE
Heavy Gauge Deadbolt Str 6” H
MA 760-B
US3
N/A
ALL
1-1/8” x 6”
Heavy Gauge Deadbolt Str 7-3/4” H
MA 765-B
US3
N/A
1-3/4” or Thicker
1-5/8” x 7-3/4”
MA 770-B
US3
N/A
ALL
1-1/4” x 8”
MA 775-B
US3
N/A
1-3/4” or Thicker
1-5/8” x 11”
ALUMINUM FRAME FILLER plates fit selected Folger Adams, Von Duprin, and Rofu numbers
DJ AF-260-DU
DJ AF-260-SL
DJ AF-261-DU
DJ AF-261-SL
AF-260
AF-261
DJ AF-29-SL
DJ AF-29L-SL
AF-29
AF-29L
DJ AF-291-SL
DJ AF-291L-SL
AF-291 AF-291L
DJ FS-260-PC
FS-260-PC
• Electric Strike Filler
• Fits selected Folger Adams, Von Duprin,
and Rofu numbers
• Polybagged
and Rofu numbers
• Polybagged
and Rofu numbers
• Polybagged
• ANSI strike cut out
• Polybagged
Phone: (612) 729-4003
4 ⅞” x 1 ¼”
Duro Coated
4 ⅞” x 1 ¼”
Silver Coated
4 ⅞” x 1 ¼”
Duro Coated
4 ⅞” x 1 ¼”
Silver Coated
9” x 1 ⅜”
Silver Coated
9” x 1 ⅜”
Silver Coated
9” x 1 ⅜”
Silver Coated
9” x 1 ⅜”
Silver Coated
4 ⅞” x 1 ¼”
Prime Coat
[email protected]
page 15
Fax: (612) 729-4216
PANIC BARS
VON DUPRIN
3
3%2)%342)-3
+EYRETRACTSLATCH
+EYUNLOCKS
THUMBPIECE
,%33#9,).$%2
,%33#9,).$%2
6$.,26"
6$.,26$
6$4026$
"2%!+
!7!9
.%7
"2%!+
!7!9
"2%!+
!7!9
+EYLOCKS
UNLOCKSLEVER
+EYRETRACTSLATCH
,%33#9,).$%2
,%33#9,).$%2
6$,26,(2"
6$,.,26,(2$
6$,262(2"
6$,.,262(2$
6$,26,(2$
6$,26,(2$
6$,.,26,(2$
6$,262(2$
6$,262(2$
6$,.,262(2$
+EYLOCKSLEVER
,%33#9,).$%2
2)-%8)4$%6)#%3
users of Von Duprin products may have questions.
&EATURES
.ONHANDED
&IELDSIZEABLE
LATCHBOLT%/
LATCHBOLT%/
gDEVICElTSgTOgDOOR
gDEVICElTSgTOgDOOR
-INSTILE%/
-INSTILE%/
3TDSTRIKE
6$%/$
2IM
6$%/
2IM
6$%/
2IM
6$%/!.
2IM
6$%/53
362
6$%/!.
362
99 Series features grooved mechanism case.
6$%/
6$%/
9827/9927 surface mounted vertical rod device
342)+%3
342)+%3
02/*%#4)/.
6$
&/22)-6%24)#!,
2/$!00,)#!4)/.
#/.35,4&!#4/29
"LAC.YLON
"LACK.YLON
6$
"LACK.YLON
26D = Dull Chrome, 28 = Anodized Aluminum, 313 = Dark Bronze, 10B = Dark Bronze
Phone: (612) 729-4003
[email protected]
page 16
Fax: (612) 729-4216
PANIC BARS
VON DUPRIN
2)-%8)4$%6)#%3
&EATURES
.ONHANDED
&IELDSIZEABLE
LATCHBOLT%/
LATCHBOLT%/
gDEVICElTSgTOgDOOR
gDEVICElTSgTOgDOOR
-INSTILE%/
-INSTILE%/
6$%/30
2IM
6$%/30
2IM
6$%/30
2IM
6$%/30
362
6$%/30
362
6$%/
6$%/
2)%342)-3
3%2)%342)-3
6$,30,(2"
6$.,30
6$+30
6$.,30
6$+30
6$.,30
6$,302(2"
6$.,30
6$,30,(2"
6$,302(2"
,OCKSUNLOCKS
KEYLEVER
+EYRETRACTSLATCH
,%33#9,).$%2
+EYRETRACTSLATCH
,%33#9,).$%2
+EYUNLOCKSKNOB
,%33#9,).$%2
7)4(#9,).$%2
2)-%8)4$%6)#%3
3%2)%342)-3
4$%6)#%3
&EATURES
.ONHANDED
&IELDSIZEABLE
LATCHBOLT
-INSTILE
3TDSTRIKE
6$.,2$
+EYRETRACTSLATCH
,%33#9,).$%2
6$402$
6$402
6$%/
%XIT/NLY
6$%/$
%XIT/NLY
6$40$
4HUMB0IECE
+EYUNLOCKS4(5-"0)%#%
,%33#9,).$%2
26D = Dull Chrome, 28 = Anodized Aluminum, 313 = Dark Bronze, 4 = Brass
Phone: (612) 729-4003
[email protected]
page 17
Fax: (612) 729-4216
PANIC BARS
Jackson® Panic Exit Devices
®
• Designed for Use With 1-3/4” Narrow, Medium,
and Wide Stile Aluminum, Wood or Hollow Metal Doors
• Concealed Fastening for Added Security
Jackson® 10 Series Panic Exit Devices
Available in both a Rim and Concealed Vertical Rod version. This device is suitable for
use with 1-3/4” (44.5 mm) narrow, medium, and wide stile aluminum, wood, or hollow
metal doors. Extensions for taller doors are available. For Model 1085 keyed entry, a
No. 86 Mounting Pad is required when using a Mortise Cylinder. For Model 1095
keyed entry, a Rim Cylinder is required, but a Mounting Pad is not required.
Model 1095
Model 1085
Part #
1095A42L
1095A42R
1095BRZ42L
1095BRZ42R
1085A42
1085BRZ42
Type
Rim
Rim
Rim
Rim
Concealed Vertical Rod
Handing
Left Hand-Reverse Bevel
Right Hand-Reverse Bevel
Non-Handed
Non-Handed
Finish
Satin Aluminum
Satin Aluminum
Dark Bronze
Dark Bronze
Satin Aluminum
Dark Bronze
FEATURES:
• Contoured Field Sizeable 48" (1219 mm) Long Crossbar
• Standard Door Height 84" (2134 mm) – Extension Available
• Dual Dogging Feature – By Outside Cylinder
– By Dogging Pins on Panic Housing
®
Available in both a Rim and Concealed Vertical Rod version, this device is
suitable for use with 1-3/4” (44.5 mm) narrow, medium, and wide stile aluminum,
wood, or hollow metal doors. It has been certified to ANSI 156.3 – Grade 1
specification, and is available with optional high-impact resistance upgrades.
For doors wider than 36” (914 mm), field sizeable lengths up to 48” (1219 mm)
are available on special order. Extensions for doors taller than 84” (2134 mm)
are available.
For Model 2085 keyed entry, a No. 86 Mounting Pad is required when using a
Mortise Cylinder. For Model 2095 keyed entry, a Rim Cylinder is required, but a
Mounting Pad is not required.
Model 2095
Model 2085
Part #
2095A36L
2095A36R
2095BRZ36L
2095BRZ36R
2085A36L
2085A36R
2085BRZ36L
2085BRZ36R
Type
Rim
Rim
Rim
Rim
Handing
Right Handed-Reverse Bevel
FEATURES:
Finish
Satin Aluminum
Satin Aluminum
Dark Bronze
Dark Bronze
Satin Aluminum
Satin Aluminum
Dark Bronze
Dark Bronze
Phone: (612) 729-4003
FEATURES:
• Standard 36" (914 mm) Wide Door - Field Sizeable up to 48"
(1219 mm) Width Available on Special Order
• Standard Door Height 84" (2134 mm) – Extension Available
• Concealed Easy to Use Dogging System – Optional Cylinder
Dogging Available on Special Order
[email protected]
page 18
Fax: (612) 729-4216
PANIC BARS
Devices
®
• Designed for Use With 1-3/4” Narrow, Medium,
and Wide Stile Aluminum, Wood or Hollow Metal Doors
• “Soft-Touch” Smooth Action Push-Pad
• Field Sizeable
Available in a Rim, Concealed, and Surface Vertical Rod versions, this device is
suitable for use with 1-3/4” (44.5 mm) narrow, medium, and wide stile aluminum,
wood, or hollow metal doors. The base is easily trimmed for field sizing, and the
vertical rods are shipped to fit up to 84” (2134 mm) tall doors. Extensions or
longer rods for taller doors are available on special order. This Exit Device features
an easy to use dogging system, and is available with keyed cylinder dogging on
special order. The 1200 Series touch pad with “Soft-Touch” insert requires slight
pressure anywhere on bar insert for instant release of the locking mechanism.
Overall projection is only 2-7/8” (73 mm) from the door surface, and mounting
hardware is concealed.
Part #
1275A36X84
1275BRZ36X84
1285A36L
1285A36R
1285BRZ36L
1285BRZ36R
1295A36
1295BRZ36
1295A48
1295BRZ48
Type
Surface Vertical Rod
Surface Vertical Rod
Rim - 36’ (914 mm) Base
Rim - 36’ (914 mm) Base
Rim - 48’ (1219 mm Base
Rim - 48’ (1219 mm) BAse
Handing
Finish
Non-Handed
Satin Aluminum
Non-Handed
Dark Bronze
Left Hand-Reverse Bevel Satin Aluminum
Right Hand-Reverse Bevel Satin Aluminum
Left Hand-Reverse Bevel Dark Bronze
Right Hand-Reverse Bevel Dark Bronze
Non-Handed
Satin Aluminum
Non-Handed
Dark Bronze
Non-Handed
Satin Aluminum
Non - Handed
Dark Bronze
Model 1275
Model 1285
Model 1295
SPECIFICATIONS:
1275 Surface Vertical Rod Device
• Standard 36" (914 mm) Wide Door - 48" (1219 mm) Width
Available on Special Order
• Standard Door Height 84" (2134 mm) – Field Sizeable 120"
(3048 mm) Tall Available on Special Order
1285 Concealed Vertical Rod
• Standard 36" (914 mm) Wide Door - 48" (1219 mm) width
Available on Special Order
• Standard Height 84" (2134 mm) - Extension Available
• Requires Cat. No. 86 Cylinder Mounting Pad When Using
Mortise Cylinder for Keyed Outside Entry
1295 Rim Device
• Stocked in Both 36" (914 mm) and 48" (1219 mm) Widths
• Surface Mounted Roller Strike Standard
• Requires Rim Cylinder for Keyed Entry
Jackson® Locking Flat Lever Outside Trim
• Designed for Use With Jackson 1200
and 20 Series Panic Exit Devices
• Non-Handed, Field Reversible
The Jackson® Locking Flat Lever Outside Trim has a narrow 1-3/4” (44.5 mm) escutcheon
that allows it to be used on narrow stile doors. The flat style lever is key-controlled, and
requires the use of a Mortise Cylinder, which locks or unlocks the lever (ANSI Function – 80)
Part #
75LV02A
75LVO2BRZ
85LV02A
85LV02BRZ
95LV02A
95LV02BRZ
Offset
Model 1275 Surface Vertical Rod Panic Device
Model 1275 Surface Vertical Rod Panic Device
Models 1285 and 2085 Concealed Vertical Rod Panic Devices
Models 1285 and 2085 Concealed Vertical Rod Panic Devices
Models 1295 and 2095 Rim Panic Devices
Models 1295 and 2095 Rim Panic Devices
Jackson® 12” Top Rod Extender
• For Use With Jackson
1085, 1285, and 2085
Exit Devices
The Jackson® Top Rod Extender is 12”
(305 mm) long, and is intended to extend the length
of the top rod for doors over 84” (2134 mm) when
used with Jackson® Concealed Vertical Rod
Panic Exit Devices.
Finish
Satin Aluminum
Dark Bronze
Satin Aluminum
Dark Bronze
Satin Aluminum
Dark Bronze
®
CL
7-7/16"
(188 mm)
4-1/2"
(114 mm)
2-1/4"
(57 mm)
Projection
Jackson® #86 Cylinder
Mounting Pad
• For Mounting Mortise
Cylinders on Jackson
Panic Exit Devices
The Jackson® #86 Cylinder Mounting Pad with
locking ring is for use with a Mortise Cylinder
for keyed entry on Jackson® 1085, 1285, and
2085 Concealed Vertical Rod Panic Exit Devices.
Part #
CAT.
86A NO.
86A
86BRZ
86BRZ
Part #
J1347
Phone: (612) 729-4003
1-3/4"
(45 mm)
Finish
FINISH
Satin Aluminum
Satin
Aluminum
Dark Bronze
[email protected]
page 19
Fax: (612) 729-4216
Dark Bronze
PANIC BARS
ADAMS RITE
SWINGING
DOOR HARDWARE
LIFE SAFTEY EXIT
DEVICES
Series 8200
Series 8400
How To Order
8100/8200 SVR
Order cylinder separately if required. On pairs of doors,
specify one-half total exit opening for width.
1. For Wood or Hollow
Metal Door
2. For Metal Stile Glass
Door
EXAMPLE:
NARROW STILE SURFACE
VERTICAL ROD
Door Opening Width
30 Inches
36 Inches
42 Inches
48 Inches
8222-30-US3
Vertical Finish
Pushbar Finish
1 628 Satin Alum
2 313 “Bronze” Anod.
3 335 Black Anod.
0 US Finish
1 628 Satin Alum.
2 313 “Bronze Anod.
3 335 Black Anod.
0 US Finish
NARROW STILE
MORTISE EXIT DEVICE
Add Dash No. for US Finish
US3 - Bright Brass
US32 - Bright Stainless
US4 - Satin Brass
US32D - Satin Stainless
US9 - Bright Bronze SP - Special
US10 - Satin Bronze
Features:
• Patented top latching mechanism
interlocks door to frame.
• Adjustable steel rods protected in
contoured covers.
• Pushbar clad or anodized, not plated, in a
variety of finishes.
• Easy to install.
• Clean, unobtrusive design.
• Strong, durable construction for a high
level of security.
Features:
• Heavy duty deadlatching mechanism
level of security.
How To Order
8400 Mortise
Order cylinder separately if required.
Handing:
Face Shape
Door Opening Width
Handing:
0
1
4
2
30 Inches
36 Inches
• Specify handing and bevel if applicable.
Lever Entry Trim is field reversible.
Flat
Radius
Rad. w/W’seal
Bevel
• Device is non-handed. Lever Entry Trim is
field reversible.
Pushbar Length:
• Standard Sizes: Dimensioned for 30”, 36”,
42” & 48”openings. Standard width bars
can be field cut to the next smallest
opening width.
Bar Height:
• Standard model adjusts from 30” to 44”.
Door Height:
42 Inches
48 Inches
Door Hand
Pushbar Length:
7
8
42” & 48” openings. Standard width bars
opening width. Backsets available in
31/32“, 1-1/8”, 1-1/2”.
RHR
LHR
EXAMPLE:
8412-27136-US3
Vertical Finish
Pushbar Finish
Door Thickness
1 628 Satin Alum
3 335 Black Anod.
0 US Finish
1 628 Satin Alum.
3 335 Black Anod.
0 US Finish
• Suits 1-3/4” standard. Can be modified
for thicker doors.
Stile Width:
• Minimum 2” Stile. Fits Narrow, Medium
and Wide Stile aluminum doors.
Backset
• Standard model fits up to 8ft. door, with
bar height at 40” - 44”. For doors up to
10ft., use Tall Door Kit 8055.
2 31/32” 4 1-1/2”
3 1-1/8”
Projection
• 2-5/8” when fully projected, 1-5/8” when
dogged.
US3 - Bright Brass
US4 - Satin Brass
US9 - Bright Bronze
Door Thickness
• Suits 1-3/4” standard, up to 2-1/4”.
US10 - Satin Bronze
Materials:
• Pushbar made of extruded aluminum,clad
or anodized in a variety of finishes.
Stile Width:
• Minimum 2” Stile. Fits Narrow, Medium
and Wide Stile aluminum doors.
AR
AR
Dogging:
• Standard dogging with hex key or cylinder
dogging option. Electric dogging also
available.
Product Number
8211-36 Narrow Stile Glass Door
8222-36 Narrow Stile Glass Door
RETROFIT KITS
MONITORED DUMMY PUSHBAR
Dummy pushbar with no latch mechanism
but with either a single or dual monitor/signal
switch. Most common application is in
conjunction with a maglock where bar is used
to turn off magnet and allow exit form building.
Dual switch version allows redundancy where
required by code or the operation of a signal
device along with maglock.
Product Number
AR 8099-M1-3136 “Active Dummy”
AR 8099-M1-3236 “Active Dummy”
The retrofit kit will contain the dogging
assembly, 2-keys, blank end cap, drilling
template, 7/32” drill bit and installation
instructions.
Product Number
AR 91-0956-01 8100/8200
AR 91-0957-02 8300/8400/8500/8600
AR 91-0958-03 8700/8800
AR 29-0481
Dogging Key 1/8”
AR 31-0265
Dogging Assy
“Only” 8000 Series
Phone: (612) 729-4003
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
Product Number
8412-27136 Exit Device-Mort N/Style
[email protected]
page 20
Fax: (612) 729-4216
PANIC BARS
ADAMS RITE
LIFE SAFTEY EXIT DEVICES
8700/8800
Series
How To Order
8600
Series
Order cylinder escutcheon and
cylinder separately if required.
On pairs of doors, specify one-half
total exit opening for width. Specify 8655 Tall Door Kit if required.
RIM MOUNTED EXIT DEVICE
Features:
• Patented “Starwheel” Bolt interlocks door
to frame.
• Pushbar is anodized or clad, not plated, in
a variety of finishes.
• Unobtrusive design for clean sight lines.
level of security.
8600 Series (CVR)
Door Type
5 Hollow Metal
6 Alum/Glass
Door Opening Width
30 Inches
36 Inches
EXAMPLE:
NARROW STILE CONCEALED
VERTICAL ROD EXIT DEVICE
Features:
• Patented top latching mechanism
interlocks door to frame.
• Top and bottom adjustable steel rods.
level of security.
42 Inches
48 Inches
AR
AR
AR
AR
AR
8611-30-US3
Door Finish
Pushbar Finish
1 628 Satin Alum
3 335 Black Anod.
0 US Finish
1 628 Satin Alum.
3 335 Black Anod.
0 US Finish
ELECTRIC LATCH RETRACTION
The EL option uses a solenoid mounted in
pushbar for instantaneous unlocking and
locking of the exit device from a remote location
or access control device. Because electrical
operation of device is fail-secure, this option
can be used on fire-rated as well as life-safety
applications. In the event of a power failure
device automatically relocks.
US3 - Bright Brass
US4 - Satin Brass
US9 - Bright Bronze
US10 - Satin Bronze
Handing:
AR
AR
AR
AR
• Device is non-handed. Lever Entry Trim is
field reversible.
Pushbar Length:
42” & 48”openings. Standard width bars
opening width.
Door Height:
• Standard unit adjustable for doors up to
66” above the selected bar height. For
doors over 66” above bar height, up to 10’,
use 8655 Tall Door Kit.
AR
AR
AR
Product Number
8611-36 Alum Stile Glass Door
8655
Tall Door Kit For/8600
Product Number
8801EL-36-12VDC Rim Alum.
How To Order
8700/8800 Rim
Bar Height:
• Adjustable from 30” to 44”.
Product Number
8701-36 Wood & Hollow Metal Door
Required to mount any make standard mortise
cylinder (with MS Cam) on outside.
Specify finish being matched.
Product Number
AR 8650-313 W/MS CAM BRZ
AR 8650-628 W/MX CAM ALM
Phone: (612) 729-4003
Door Opening Width
Door Type
CYLINDER ESCUTCHEONS
7 Wood/Hollow Metal
8 Narrow Stile Glass
EXAMPLE:
30 Inches
36 Inches
8703-42-US3
Pushbar Finish
1 628 Satin Alum.
3 335 Black Anod.
0 US Finish
Add Dash No. for
US Finish
US3 - Bright Brass
US4 - Satin Brass
US9 - Bright Bronze
US10 - Satin Bronze
[email protected]
page 21
42 Inches
48 Inches
Fax: (612) 729-4216
DEAD LATCHES
ADAMS RITE
1.0 “ x 6 7/8”
Face Plate
1 1/4
x 8”
8.0”
x “1.25”
Face Plate
Plate
Face
4510 STANDARD
STANDARD DUTY
4510
DUTY
Latchlock Series
Deadlatch
Series
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
4512-15-101-628
4512-16-101-628
4512-25-101-313
4512-25-101-628
4512-26-101-313
4512-26-101-628
4512-35-101-313
4512-35-101-628
4512-36-101-313
4512-36-101-628
4512-45-101-313
4512-45-101-628
4512-46-101-313
4512-46-101-628
4513-35-MC
4513-36-MC
7/8” LH
7/8” RH
31/32” LH
31/32” LH
31/32” RH
31/32” RH
1-1/8” LH
1-1/8” LH
1-1/8” RH
1-1/8” RH
1-1/2” LH
1-1/2” LH
1-1/2” RH
1-1/2” RH
1-1/8” LH*
1-1/8” RH*
4920 ANSI SIZE LATCHLOCK
For Hollow Metal or Wood Doors
AR 4900-35-101-313
1-1/8” LH
AR 4900-35-101-628
1-1/8” LH
AR 4900-36-101-313
1-1/8” RH
AR 4900-36-101-628
1-1/8” RH
AR 4900-45-101-313
1-1/2” LH
AR 4900-45-101-628
1-1/2” LH
AR 4900-46-101-313
1-1/2” RH
AR 4900-46-101-628
1-1/2” RH
AR 4920AN45-602-628 1-1/2” LH
AR 4920AN46-602-628 1-1/2” RH
(*Less Faceplate & Mounting Tabs)
How To Order
4920ANSI
ANSI Latchlock
4920
Deadlatch
How To Order
4510
Latchlock
4510
Deadlatches
Face Shape
Backset Door Hand
0
1
1W
2
1
2
3
4
Flat
Radius
Rad. w/W’seal
Bevel
EXAMPLE:
7/8”
31/32”
1 1/8”
1 1/2”
5
6
1. Specify QUANTITY
2. Specify CATALOG NO. with DASH NO.
to Specify:
LH or RHR
RH or LHR
4511-36-201-628
1 4.63”
2 2.63”
628 Satin
Alum.
313 “Bronze”
Anod.
335 Black
Anod.
Phone: (612) 729-4003
Strike
4920AN - Flat
4922AN - Bevel
602 - 4506
000 - Less Strike
EXAMPLE:
Strike Size Strike Shape/Lip Length Finish
01 Flat/Std. Jamb
02 Radius/Std. Stile
17 Flat Center-hung
4.0” Jamb
21 Flat Center-hung
4.5” Jamb
XX Other lip lengths
Door Nose Shape
4920AN45-602-628
Hand
Finish
05 RH or LHR
06 LH or RHR
628 Alum
612 Satin Bronze
313 “Bronze” Anod.
[email protected]
page 22
Fax: (612) 729-4216
ALUMINUM DOOR HARDWARE
CRL
FlushFlush
BoltsBolts
,
• Radiused
Radius Face
Face
With
With
1/8", 3/16" or 1/4" (3.2, 4.8,
or 6.4 mm) Offsets
• Rod Length for 12" (305 mm)
Face Centerline Installation
• 7/8" (22.2 mm) Backset
• 5/8" (15.9 mm) Throw
m)
4-1/4"
(108 mm)
DL2210DU14
OffsetOFFSET
1/8’ (3.2
1/8"mm)
(3.2 mm)
1/8"mm)
(3.2 mm)
1/8’ (3.2
3/16"
(4.8 mm)
3/16’ (4.8
mm)
3/16"
(4.8 mm)
3/16’ (4.8 mm)
1/4" (6.4 mm)
1/4’ (6.4 mm)
1/4" (6.4 mm)
1/4’ (6.4 mm)
5-7/32"
(132.6 mm)
7/8"
(22.2 mm)
These Flush Bolts are designed to
work on any radius faced narrow stile
aluminum door. Intended to securely
lock an inactive door. Three different
offsets are available in aluminum or
bronze finishes. A Nylon Flush Bolt
Guide is included. One per package.
PartNO.
#
CAT.
DL2210A18
DL2210A18
DL2210DU18
DL2210DUI18
DL2210A316
DL2210A316
DL2210DU316
DL2210DU316
DL2210A14
DL2210A14
DL2210DU14
4-1/4"
(108 mm)
Backset
15/16"
(23.8 mm
15/16"
(23.8 mm)
Finish
FINISH
AluminumAluminum
FINISH
Bronze
Bronze
AluminumAluminum Aluminum
Bronze
Bronze
Bronze
Aluminum
Aluminum
Aluminum
Bronze
Bronze
Bronze
Aluminum
Bronze
Offset
ing.
ADAMS RITE
How To Order
4590-4591 Paddles
4590 DEADLATCH PADDLES
AR
AR
AR
AR
AR
AR
AR
AR
Product Number
4590-01-00-313 Pull To Left
4590-01-00-628 Pull To Left
4590-02-00-313 Push To Left
4590-02-00-628 Push To Left
4590-03-00-313 Pull To Right
4590-03-00-628 Pull To Right
4590-04-00-313 Push To Right
4590-04-00-628 Push To Right
Pull to Right
-01 4500, 4700
-11 MS+1890
-03
-13
4500, 4700
MS+1890
Push to Left
Push to Right
-02 4500, 4700
-12 MS+1890
-04
-14
EXAMPLE:
00
01
02
03
04
1¾”
113/16” - 2”
2¼” - 2½”
2¾” - 3”
3¼”
4500, 4700
MS+1890
4590-02-01-313
Door Thickness
Phone: (612) 729-4003
Pull to Left
Finish
628
313
335
US3
US26
Satin Alum.
“Bronze” Anod.
Black Anod.
Brass 4591
Chrome (4591)
[email protected]
page 23
Fax: (612) 729-4216
ADAMS RITE
SWINGING DOOR HARDWARE
DEADLOCKS
4901
4902
MS1850S
Series
4500
4568
4568
FINISH: Satin aluminum 130, bronze 121 or
black 119.
4901 AND 4902
AR
AR
AR
AR
AR
AR
AR
How To Order
1
2
3
4
Flat
Radius
Bevel
Rad. w/W’seal
7/8”
31/32”
1-1/8”
1-1/2”
MS1852S-215-628
Door Hand
Finish
15
16
10
628
313
335
*Any flat or radium face,
except Schoolhouse
Door Hand
Door Thickness*
5 LH or LHR
6 RH or RHR
01
02
03
04
**Assuming handle on
interior of doors.
1¾” - 2”
2¼” - 2½”
2¾” - 3”
3¼”
**For handle without cam plug for use with
MS+1890 in 1¾” door, specity -14.
EXAMPLE:
Finish
130
121
119
4568-501-130
Satin Alum.
Bronze
Black
LMB-05
Threaded
d 10-32
Threaded
12-24
1" Wide x 2-3/8"
1-3/8" Wide x 1-1/2"
LMB-03 Universal Mounting Bracket
LH or RHR
RH or LHR
Non-handed*
Center
Center
Center
Center
Backset
Faceplate Shape
EXAMPLE:
Product Number
4568-501-121
L.H.,
4568-501-130
L.H.,
4568-601-121
R.H.,
4568-601-130
R.H.,
How To Order
4568 Handles
Product Number
4901-01-121
Large
4901-01-630
Large
4901-02-121
Radius
4901-02-630
Radius
4902-01-121
Small
4902-01-630
Small
4902-02-630
Rad. Short
LMB-03
MS1850S Series (Longbolt)
MS1850S
MS1851S
MS1852S
MS1851SW
Snap-In Nylon
Insert
Deadlatch Strikes
y
Product Number
MS1850S-110-628 7/8”
MS1852S-215-628 31/32”, L.H.
MS1852S-216-628 31/32”, R.H.
MS1852S-315-313 1-1/8”, L.H.
MS1852S-315-628 1-1/8”, L.H.
MS1852S-316-313 1-1/8”, R.H.
MS1852S-316-628 1-1/8”, R.H.
MS1852S-415-628 1-1/2”, L.H.
MS1852S-416-628 1-1/2”, R.H.
(With Short Bolt)
AR 1852S-225-628
31/32”
AR 1852S-325-628
1-1/8”
AR
AR
AR
AR
AR
AR
AR
AR
AR
Snap-In Nylon
Insert
AR
AR
AR
AR
Satin Alum.
“Bronze Alum.
Black Anod.
Universal mounting bracket for use in hollow
metal or aluminum doors and frames. LMB03 has different offsets at each end to allow
adjustment for an assortment of installations.
Holes are tapped 10-32 and supplied with
four 10-32 x 1/2” phillips flat mounting screws.
Packed two brackets and four screws per set.
Part Number
MM LMB-03
Bracket Tapped
MM LMB-05
for 1-1/4” x 4-7/8”
ASA strikes
Phone: (612) 729-4003
4580
Cam Discs
Secured in latch body by cylinder setscrew,
plug is also rigidly tied to handle escutcheon
by hardened steel pins. Handing can be
reversed by removing a spring clip, “flopping”
the cam and replacing the clip.
Product Number
AR 4580-500
L.H.
AR 4580-600
R.H.
[email protected]
page 24
Fax: (612) 729-4216
USCAN
,%6%2(!.$,%3
!,5-).5-$//2(!2$7!2%
,!4#(,/#+3"/$9/.,9
,%33342)+%&!#%0,!4%
5# $,
,(
"3
5# $,
2(
"3
5# $,
,(
"3
5# $,
2(
"3
-/24$%!$"/,43"/$9/.,9
,%33342)+%&!#%0,!4%
5#$"
"3
5#$"
"3
,ATCH,OCK,EVER(ANDLE
&ORUSEWITH$,TYPELATCHLOCK
#AMPLUGNONHANDEDlELDREVERSIBLE
&INISHESAVAILABLE
!,"AKED3ATIN!LUMINUM0AINT
$5"AKED3TOREFRONT"RONZE0AINT
3PECIFY
&INISH
(ANDIFPREHANDINGREQUIRED
&!#%0,!4%3
5#$"!,
5#$"$5
5#$"!,
5#$"$5
5#$"$5
5#$"$5
5##0
#AM0LUG/NLY
5#,,(!,
5#,2(!,
&!#%0,!4%3
5#,,($5
5#$,!,
5#$,$5
5#$,!,
5#$,$5
5#,2($5
0!$$,%3
5#0,(!,
5#02(!,
5#0,($5
5#02($5
/RDERING)NFORMATION
/RDERING)NFORMATION
5#$,
&LATFACEPLATE
5#$,
2ADIUSFACEPLATE
5#$"
&LATFACEPLATE
5#$"
2ADIUSFACEPLATE
&0
2ADIUSWEATHER
STRIPPEDFACEPLATE
5#$"
,EFT(ANDBEVELED
FACEPLATE
5#$"
2IGHT(ANDBEVELED
FACEPLATE
Phone: (612) 729-4003
,ATCH,OCK0ADDLE(ANDLE
s0USHOR0ULL0ADDLE(ANDLE
s&ORUSEWITH$,4YPE,ATCH,OCK
s&IELDREVERSIBLEFOROPPOSITEHANDAND0USHOR0ULL
s#AM0LUGlELDREVERSIBLEINCLUDED
s%XTRUDED!LUMINUM(ANDLE
s&INISHESAVAILABLE
!,(ANDLEANODIZED3ATIN!LUM(OUSINGBAKED3ATIN!LUMPAINT
$5(ANDLEANODIZED3TOREFRONT"RONZE(OUSINGBAKED3TOREFRONT
"RONZEPAINT
[email protected]
page 25
Fax: (612) 729-4216
Deluxe Through-Glass Video/DVD Drop
• Full Size Opening Directs Video
Tapes and DVD’s to Collection Bin
• Brushed Stainless Steel Face Plate
• Installs in 1/4" (6 mm) Glass
The
Deluxe
Through-Glass
Drop
allows
The
unit
fits through
a cut-out inVideo/DVD
the glass and
clamps
customers
to
return
videos
and
DVD’s
after
business
together by tightening four screws. Brushed stainless steel
hours while maintaining store security. The unit fits
face plate has an 8-1/2” (216 mm) wide x 2” (51 mm) high
through a cut-out in the glass and clamps together by
deposit slotfour
backed
by a Brushed
spring loaded
flap that
helps
tightening
screws.
stainless
steel
face
reduce
airan
infi8-1/2"
ltration.
A detachable
coverhigh
plate
has
(216
mm) widerear
x 2"chute
(51 mm)
providesslot
additional
and has
a removable
deposit
backedsecurity,
by a spring
loaded
flap that spring
helps
reduce
chute
loaded air
barinfiltration.
at the baseAfordetachable
attachmentrear
of the
vinylcover
slide,
provides
andtapes
has and
a removable
to gentlyadditional
and safely security,
direct video
DVD’s to a spring
loaded bar at the base for attachment of the vinyl slide
collection bin. (not included)
to gently and safely direct video tapes and DVD’s to a
Glass
collection bin (not included).
Removable
Rear Chute
SPECIFICATIONS:
Material: Stainless Steel; Steel; Plastic
Finishes: Brushed Stainless Steel (Face Plate Only);
Black ABS Plastic (Rear Chute)
Glass Fabrication: Cut-out Required
Instructions and Template Included
CAT. NO.
8-1/2"
(216 mm)
Thumb
Screw
4-3/4"
(121 mm)
MANUFACTURED IN THE USA
BY C.R. LAURENCE
8"
(203 mm)
An ISO9001:2000 Certified Company
11"
(279 mm)
SLOT SIZE (W x H)
DESCRIPTION
Part
# # Deluxe Through-Glass
Description
SlotSlot
(W xx(W
H)
Part
Description
H)
xSize
2" Size
(216
51xmm)
DVD82
Video/DVD Drop 8-1/2"
DVD82
Video/DVD
Drop
8-1/2”
x
2
(216
51 mm)
Minimum order: 1 each. All Video/DVDVideo/DVD
Drops can be combined
for quantity pricing.
Drop
8-1/2” x 2” x(216
x 51 mm)
No-Draft
MailMail
SlotsSlots
CRL
No-Draft
2"
(51 mm)
9-1/2" (241 mm)
1/8" (3 mm)
Stainless Steel
Clamps to Glass
Front View
Side View
new
• Energy Efficient, Ideal for All Climates
• Internal Brush Strip for Added Insulation and Privacy
• Telescopic Sleeve Allows for a Perfect Fit on
'All-Glass' Doors From 1/4" to 1/2" (6 to 12 mm) Thick
• Available in Two Popular Finishes, Satin Anodized
and Duranodic Bronze
CRL No-Draft
Mailare
Slots
are designed
out the weather
welland
as dirt.
dust and dirt.
No-Draft
Mail Slots
designed
to keep tooutkeep
the weather
as well asasdust
The
No-Draft
has door
two door
both spring
and weatherstripped,
TheCRL
No-Draft
MailMail
Slot Slot
has two
flaps,flaps,
both spring
loadedloaded
and weatherstripped,
as well as an internal brush strip for greater insulation and privacy. Both the external and
as wellflaps
as anopen
internal
brush
strip forforgreater
insulationBoth
andhave
privacy.
Both the
external
internal
to 135
degrees
easy access.
durable
nylon
torsionand
rods
internal
aps open
135both
degrees
fortightly
easy access.
Both have
nylonABS
torsion
rodsand
instead
of flsprings
to to
keep
flaps
shut. Made
from durable
high impact
plastic
anodized
aluminum,
Slotsshut.
will Made
not rust
or tarnish
over ABS
time.plastic
Easyand
to
instead of
springs toCRL
keepNo-Draft
both flapsMail
tightly
from
high impact
install by simply running a bead of CRL Cat. No. RTV408C Neutral Cure Silicone on both
aluminum,
will not
rustside
or tarnish
theanodized
interior and
exteriorNo-Draft
sleevesMail
and Slots
attaching
each
to the over
glasstime.
around the 10-1/4"
(260 mm) wide x 1-7/8" (47.6 mm) high cut-out.
RTV408C
Silicone
Sealant
135
Degrees
135
Degrees
Interior
D
A
Telescopic
inner and outer
sleeves allow for
variations
in door
thicknesses
C
B
Exterior
Door Glass
1/4" to 1/2"
(6 to 12 mm)
Thick Glass
End View
Interior Side
Exterior Side
SPECIFICATIONS:
CAT. NO.
FINISH
OVERALL SIZE (A x B)
OPENING SIZE (C x D)
Part #
Finish
Overall Size (A x B)
Opening Size (C x D)
3" x 11-1/2" (76 x 292 mm)
Satin Anodized
NDMS12A
1-7/16" x 9-3/4" (37 x 248 mm)
NDMS13A
Satin
Anodized
3”
x
1
1-1/2”
(76
x
292mm)
1-7/16”
9-3/4”(37
(37 xx 248
248MM
NDMS12DU Duranodic Bronze 3" x 11-1/2" (76 x 292 mm)
1-7/16" xx 9-3/4"
mm)
NDMS13BL
3” x 1 1-1/2” (76 x 292mm) 1-7/16” x 9-3/4” (37 x 248MM
Minimum order: 1 each.Duranodic
Finishes can beBronze
combined for quantity pricing.
Phone: (612) 729-4003
Material: Extruded Aluminum
Finishes: Satin Anodized or Duranodic Bronze
Glass Fabrication: Cut-Out Required
Template and Instructions Included
[email protected]
page 26
Fax: (612) 729-4216
CRL
Deluxe
Deluxe
MailMail
SlotsSlots
WithWith
Glass Channel Bar
Glass Channel Bar
MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company
SPECIFICATIONS:
Material: Extruded Aluminum
Finishes: Satin Anodized or
Duranodic Bronze
Glass Fabrication:
Cut-Out Required
Satin Anodized
Duranodic Bronze
• All Mechanisms Totally Concealed
• Available With or Without a Latch
• Made to Fit 1/4" (6 mm) Thick Glass
• Spring Tension Closing Eliminates
Dust and Water Penetration
• Three Sizes and Two Finishes
A
C
1/4"
(6 mm)
B
D
Latched
W/O LATCH
CAT. NO.
900A
900DU
922A
922DU
933A
933DU
WITH LATCH
CAT. NO.
905A
905DU
925A
925DU
935A
935DU
9412A
9412DU
9414A
9414DU
9416A
9416DU
9418A
9418DU
9514A
9514DU
9516A
9516DU
9518A
9518DU
FINISH
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Satin Anodized
Duranodic Bronze
Unlatched
OVERALL SIZE (A x B)
2-5/8" x 9-5/8" (67 x 244 mm)
2-5/8" x 9-5/8" (67 x 244 mm)
2-5/8" x 12-5/8" (67 x 308 mm)
2-5/8" x 12-5/8" (67 x 308 mm)
2-5/8" x 16" (67 x 406 mm)
2-5/8" x 16" (67 x 406 mm)
4-1/2" x 12" (114 x 305 mm)
4-1/2" x 12" (114 x 305 mm)
4" x 14" (102 x 356 mm)
4" x 14" (102 x 356 mm)
4" x 16" (102 x 406 mm)
4" x 16" (102 x 406 mm)
4" x 18" (102 x 457 mm)
4" x 18" (102 x 457 mm)
5" x 14" (127 x 356 mm)
5" x 14" (127 x 356 mm)
5" x 16" (127 x 406 mm)
5" x 16" (127 x 406 mm)
5" x 18" (127 x 457 mm)
5" x 18" (127 x 457 mm)
Phone: (612) 729-4003
OPENING SIZE (C x D)
Inside View
1-11/16" x 8-5/8" (43 x 219 mm)
1-11/16" x 8-5/8" (43 x 219 mm)
1-11/16" x 11-1/8" (43 x 283 mm)
1-11/16" x 11-1/8" (43 x 283 mm)
1-11/16" x 15" (43 x 381 mm)
1-11/16" x 15" (43 x 381 mm)
3-9/16" x 11" (90 x 279 mm)
3-9/16" x 11" (90 x 279 mm)
3-1/16" x 13" (78 x 330 mm)
3-1/16" x 13" (78 x 330 mm)
3-1/16" x 15" (78 x 381 mm)
3-1/16" x 15" (78 x 381 mm)
3-1/16" x 17" (78 x 432 mm)
3-1/16" x 17" (78 x 432 mm)
4-1/16" x 13" (103 x 330 mm)
4-1/16" x 13" (103 x 330 mm)
4-1/16" x 15" (103 x 381 mm)
4-1/16" x 15" (103 x 381 mm)
4-1/16" x 17" (103 x 432 mm)
4-1/16" x 17" (103 x 432 mm)
[email protected]
page 27
Fax: (612) 729-4216
Side View
RCI - RUTHERFORD CONTROLS
3%2)%3342)+%
2#)S hALLINONEv 3ERIES ELECTRIC STRIKE COMBINES
SEVERAL REQUESTED KEY FEATURES 3TANDARD FEATURES
INCLUDEAMULTIVOLTAGESINGLESOLENOIDSELECTABLELOCK
MODENOTOOLSNECESSARYHORIZONTALADJUSTMENTAND
PLUGINWIRECONNECTORS!NOPTIONALMONITORSWITCHIS
ALSOAVAILABLE4HE,,OW0ROlLEVERSIONACCEPTS
LATCHPROJECTIONPERFECTFORNARROWSTYLEALUMINUM
FRAMES4HE33TANDARDVERSIONISIDEALFORWHEN
YOUREQUIRELATCHPROJECTION.OTONLYWILLINSTALLATIONS
BEFASTERANDEASIERDISTRIBUTORSANDINSTALLERSCANCUT
THEIRSTRIKEINVENTORYSIGNIlCANTLYBECAUSEONESTRIKE
DOESITALL
s&IELDSELECTABLELOCKMODEnCHOOSEFAILLOCKEDORFAIL
UNLOCKEDWITHTHETURNOFADIAL&AILUNLOCKEDMODE
REQUIRES$#
s&IELDSELECTABLEVOLTAGEINPUTnACCOMODATESOR6$#
ANDTO6!#EVEN6!#INONESTRIKE
s,OWPROlLEVERSIONISSHALLOWENOUGHFORUSEWITHNARROW
STILEALUMINUMFRAMESONLYDEEP
s(ORIZONTALADJUSTABILITYFORPROPERALIGNMENTUPTO
s-ONITORSWITCHOPTION
s-ODULARhPLUGINvWIRECONNECTORSFORFASTHOOKUP
s-ODULARFACEPLATEDESIGNSFORAVARIETYOFFRAMETYPESAND
CUTOUTS
!33TRIKE-ODULE
!,3TRIKE-ODULEWITH
"$&ACEPLATE)NSTALLED
3TRIKE-ODULES
2# !,
,OW0ROlLE3TRIKE,ESS&ACEPLATE
2# !3
3TANDARD0ROlLE3TRIKE,ESS&ACEPLATE
2# !,
,OW0ROlLE3TRIKE,ESS&ACEPLATE
3TRIKE-ODULES
2# !3
&ACEPLATE/PTIONS3TANDARD0ROlLE3TRIKE,ESS&ACEPLATE
s&IELDSELECTABLELOCKMODE
s&IELDSELECTABLEVOLTAGE
s4ESTEDTOOVERCYCLES
s$YNAMICFORCETESTEDTOFTLBS
s5,,ISTED"URGLARY2ESISTANT
s,OWPROlLEVERSION
s(ORIZONTALADJUSTABILITY
s0LUGINWIRECONNECTORS
sYEARLIMITEDWARRANTY
2# ""
8
2OUND#ORNER
&OR!LUMINUMOR7OOD
2# "$
8
2OUND#ORNER
&OR!LUMINUMOR7OOD
2#
2# ""
""
8
8
2OUND#ORNER
2OUND#ORNER
&OR!LUMINUMOR7OOD
&OR!LUMINUMOR7OOD
2#
2# "$
"$
8
8
2OUND#ORNER
2OUND#ORNER
&OR!LUMINUMOR7OOD
&OR!LUMINUMOR7OOD
2# "$
""
2#
8
8
2OUND#ORNER
2OUND#ORNER
&OR!LUMINUMOR7OOD
&OR!LUMINUMOR7OOD
2# "$
"$
2#
8
8
2OUND#ORNER
3QUARE#ORNER
&OR!LUMINUMOR7OOD
&OR(OLLOW-ETALOR7OOD
&ACEPLATE/PTIONS
90° Offset Pull
Pull No.
CTC
658
8”
6085
8 1/2”
Available in 313 = bronze and US28 = clear
Many other sizes and styles available.
Single Projection Push Bar
Pull No.
CTC
1565
Specify
Available in 313 = bronze and US28 = clear
Many other sizes and styles available.
Phone: (612) 729-4003
[email protected]
page 28
Fax: (612) 729-4216
ELECTRIC STRIKES
ADAMS RITE
ELECTRIC STRIKES
7100
7300
7108
Body Kit
7110
7130
7131
Faceplate Kit
7330
7331
7140
Size
7340
7160
Use With:
7100
=
7103
+
FPK00
1-1/4” x 4-7/8” Round Corners
AR latch & cylindrical 5/8” latch throw
7101
=
7103
+
FPK01
1-1/4” x 4-7/8” Radius
7140
=
7103
+
FPK40
1-1/4” x 4-7/8” Square Corners
7130
=
7103
+
FPK30
7131
=
7103
+
FPK31
1-1/4” x 6-7/8” Radius
7110
=
7103
+
FPK10
7111
=
7103
+
FPK11
7160
=
7173
+
FPK00
Mortise latches up to 3/4” latch throw
7170
=
7173
+
FPK40
Mortise latches up to 3/4” latch throw
7300
=
7303
+
FPK00
7340
=
7303
+
FPK40
7330
=
7303
+
FPK30
7310
=
7303
+
FPK10
7311
=
7303
+
FPK11
MODULAR ELECTRIC STRIKES
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
7103A-310
7103A-315
7103A-340
7103A-410
7103A-440
7103A-510
7103A-515
7103A-517
7103A-519
7173A-310
7173A-510
7303A-310
7303A-510
AR
AR
AR
AR
AR
FPK00-313
FPK00-335
FPK00-605
FPK00-628
FPK01-313
7310
7100 Series: Grade 1
Field Reversable From Fail-Safe To Fail-Secure
7300 Series: Compact Case
Fits Jamb Sections as shallow as 1-1/15”
Field Reversable From Fail-Safe To Fail-Secure
Product Number
BODY KITS
1/2” 12DC 24AC STD/Fail Secure
1/2” 12DC FSA Fail Safe
1/2” 12AC STD/Fail Secure
1/2” 16DC STD/Fail Secure
1/2” 16AC STD/Fail Secure
1/2” 24DC FSA Fail Safe
1/2” 24DC M/FSA Monitor/Fail Safe
1/2” 24DC M/FSE Monitor/Fail Secure
Compact 12DC STD/Fail Secure
Compact 24DC STD/Fail Secure
FACEPLATE KITS
7100/7160/7300 Dk. Bronze Anod.
7100/7160/7300 Black Anod.
7100/7160/7300 Bright Brass
7100/7160/7300 Satin Alum. (Clear)
7101 Dk. Bronze Anod.
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
Phone: (612) 729-4003
7170
FPK01-335
FPK01-628
FPK10-632
FPK10-640
FPK10-652
FPK11-640
FPK11-652
FPK30-313
FPK30-335
FPK30-628
FPK31-313
FPK31-335
FPK31-628
FPK40-313
FPK40-335
FPK40-605
FPK40-628
FPK45-313
FPK45-628
Product Number
FACEPLATE KITS
7101 Black Anod.
7101 Satin Alum. (Clear)
7110 7310 Bright Brass On Steel
7110 7310 Oil-Rubbed Bronze
7110 7310 Satin Chromium
7111 7311 Oil-Rubbed Bronze
7111 7311 Satin Chromium
7130 7330 Dark Bronze Anodized
7130 7330 Black Anodized
7130 7330 Satin Alum. (Clear)
7131 Dark Bronze Anodized
7131 Black Anodized
7131 Satin Alum. (Clear)
7140/7170/7340 Dark Bronze Anod.
7140/7170/7340 Black Anodized
7140/7170/7340 Bright Brass
7140/7170/7340 Satin Alum. (Clear)
4501 Retrofit Dark Bronze Anodized
4501 Retrofit Satin Alum. (Clear)
[email protected]
page 29
Fax: (612) 729-4216
ELECTRIC STRIKES
ADAMS RITE
ELECTRIC
STRIKES
SWINGING DOOR
HARDWARE
AR
AR
AR
AR
71R1
71
R1
7108
710
8
7100
7100 SERIES
7108 SERIES
71R1 - 3/4” FACE
Complete
Complete
Rim Panic Devices
Product Number
7100-510-313-00
24DC
7100-510-628-00
24DC
7100-540-313-00
12DC/24AC
7100-540-628-00
12DC/24AC
AR
AR
Product Number
7108-540-313-00
12DC/24AC
7108-540-628-00
12DC/24AC
3/32”
AR 7240-510-630-00
AR
AR
AR
AR
Product Number
71R1-510-121 24DC CONT/INT
71R1-510-130 24DC CONT/INT
71R1-540-121 24AC/INT 12DC/ CONT
71R1-540-130 24AC/INT 12DC/ CONT
7240 Fire-Rated
Remote electrical control
of any door equipped with
cylindrical (key-in-knob/lever)
type latchsets. Electrical
actuation unlocks strike jaw,
releasing latchbolt, so door can
be opened without operating
latch itself. Extremely compact
mechanism fits into jab sections
as shallow as 1-21/32”.
71R2
How To Order
7100 Electric Strikes
For Latch:
Electric Strike
7100
7101
7110
7111
7130
7131
7140
71R2 - 1/2” FACE
Rim Panic Devices
Current & Duty
Adams Rite
4500 & 4700Series 1 DC Continuous or Intermittent
2
AC Continuous
For Jamb
(DC strike packed w/4603 rectifer)
Alum
Radius Stile
Alum/Wood
Alum/Wood
Alum
Radium Stile
Hollow Metal/Wood
7100
7140
Alum
Steel/Wood
For Latch:
Electric Strike
Mortise
For Jamb
7160
7170
Alum
Steel/Wood
For Latch:
Electric Strike
Adams Rite 8300
& 8400 Series Exit
Devices
For Jamb
7108
7128
Alum
Hollow Metal/Wood
For Latch:
Electric Strike
Rim Exit Devices
by Others*
For Jamb
71R1
71R2
Alum/Hollow Metal/Wood
Alum
AR
AR
AR
AR
(Door Centerline to Jam Edge)
00
-50
01
02
03
04
05
06
1.06” or less
1.375”
1.50”
1.63”
1.75”
1.88”
2.00”
2.13”
Voltage
3
4
5
07
08
09
10
11
12
13
EXAMPLE:
2.25”
2.38”
2.50”
2.63”
2.75”
2.88”
3.00”
Product Number
31-0044-03
12VAC INT
31-0044-04
16VAC INT
12DC Cont./24 AC INT
31-0044-05
31-0044-06
16VDC Cont.
31-0044-07
24 VDC Cont.
Finish
Features
Std/Fail-Secure
Fail-Safe
Monitor/Fail-Safe
Monitor/Fail-Secure
628
605
612
613
313
335
119
121
130
626
Satin Alum
Brass Alum
Satin Bronze
Oil Bronze
“Bronze” Anod.
Black Anod.
Black (Ritecoat)
Dk. Bronze (Ritecoat)
Silver (Ritecoat)
Satin Chrome
*71R1: For use with Von Duprin, Precision, Monarch, American Device
(available in RC119, RC121, or RC130 only)
Phone: (612) 729-4003
SOLENOIDS
NEW STYLE 7000
SERIES STRIKES
71XX-315-605-00
12 Volt
16 Volt
24 Volt
0
5
7
9
Product Number
71R2-510-121 24DC CONT/INT
71R2-510-130 24DC CONT/INT
71R2-540-121 24AC/INT 12DC/ CONT
71R2-540-130 24AC/INT 12DC/ CONT
y
Key-in-Knob
For Jamb
AC Intermittent
y
For Latch:
Electric Strike
4
Lip Extension (Dim.”A”)
AR
AR
AR
AR
AR
[email protected]
page 30
Fax: (612) 729-4216
FULL SURFACE CONTINUOUS HINGES
• Available in Satin Anodized and
Dark Bronze Anodized Finishes
3-3/16"
(81 mm)
1-23/32"
(43.7 mm)
25/32"
(20 mm)
25/32"
(20 mm)
1-7/16"
(36.5 mm)
25/32"
(20 mm)
19/32"
(15.1 mm)
27/64"
(10.7 mm)
1/32"
(0.8 mm)
Door
Jamb
Hinge length - 83”. Self tapping screws and sexbolts included.
Custom length hinges available special order
• 21’ Solid Aluminum bar stock.
• E0017 used to protect your glass from breaking. 1 1/2” x 1/2”.
• Available in bronze or clear.
• 12’ H bar.
• Available in bronze or clear.
#110012
7/16"
1"
Phone: (612) 729-4003
• Used to split glass.
• Can be cut to size
[email protected]
page 31
Fax: (612) 729-4216
HINGE COLOR CHART
Bright Brass US3
Satin Brass US4
Antique Brass US5
Antique Bronze Oiled US10B
Satin Nickel US15
Bright Chrome US26
Satin Chrome US26D
Satin Stainless US32D
Prime Coat Paint USP
Dark Bronze L2
Medium Bronze L3
Phone: (612) 729-4003
[email protected]
page 32
Fax: (612) 729-4216
HINGES
Description:
Full Mortise > Five Knuckle > Plain Bearing > Square Corner
Description:
3 1/2 x 3 1/2
1741
• Removable Pin
• Reversible
• Square Corners
Material: • Steel with Steel pin
Packaging: • 2 pack with screws
Available in USP • US3 • US4 • US5 • US15 • US26 • US26D
Description:
Description:
Full Mortise > Five Knuckle > Plain Bearing > Round Corners with 1/4” Radius
Description:
3 1/2 x 3 1/2
RC1741
• Round Corners (1/4” radius)
• Removable pin
• Reversible
Material:
• Steel with Steel pin
• Bulk without screws
Description:
Description:
Description:
3 1/2 x 3 1/2
RC1842
• Removable pin
• Reversible
Material:
Packaging: • Boxed one pair (2 each)
with screws
Description:
Phone: (612) 729-4003
[email protected]
page 33
Fax: (612) 729-4216
HINGES
Description:
Full Mortise > Five Knuckle > Plain Bearing > Square Corner
Description:
1741 - 4 x 4
1741
• Square Corners
• Removable pin
• Reversible
Material:
Description:
Description:
Description:
RC1741 - 4 x 4
1741
RC1842
RC1741
• Removable pin
• Reversible
Material:
• Bulk without screws
Description:
Description:
Description:
Description:
Description:
RC1842 - 4 x 4
1741
RC1842
• Removable pin
• Reversible
Material:
Packaging: • Boxed one pair
(2 each) with screws
Description:
Description:
Phone: (612) 729-4003
[email protected]
page 34
Fax: (612) 729-4216
BALL BEARING HINGES
Description:
Ball Bearing > Standard Weight
Description:
4 1/2 x 4 1/2
ECBB1100
Material:
Fasteners:
• Two ball bearings
• Five knuckles
• Square corner
• All machine and all wood
Available in USP • US3 • US4 • US26 • US26D
:
Description
Application
:
Description:
Full Mortise Hinges > Standard Weight > Five Knuckle > Ball Bearing
Description:
• Two ball bearings
• Non-rising removable pin with
button tip and plug
• 1/4 “ radius corner
Material:
Material:
4 1/2 x 4
Available in L2-US26D
RCBB1541
Description:
Description:
Heavy Weight > Ball Bearing
Description:
4 1/2 x 4 1/2
ECBB1102
• Four ball bearings
• Square corner
Description:
Phone: (612) 729-4003
[email protected]
page 35
Fax: (612) 729-4216
SPRING HINGES
Description:
Full Mortise Hinges > Springs > Single Acting > Square Corners
Application:
For automatic closing. Meets codes for hotels, motels, institutions, and commercial buildings.
EC1105 - 4 1/2 x 4 1/2
Available in USP • US3 • US4 • US10B • US15 • US26 • US26P
Description:
Full Mortise Hinges > Springs > Single Acting > Round Corners with 1/4” Radius
Application:
1251 - 4 x 4
1251
Available in USP • US3 • US4 • US10 • US15 • US26D
Description:
Application:
Description:
Full Mortise Hinges > Springs > Single Acting > Round Corners with 5/8” Radius
Application:
1252
1252 - 4 x 4
Description:
Application:
Phone: (612) 729-4003
[email protected]
page 36
Fax: (612) 729-4216
REINFORCING PIVOTS
Description:
Reinforcing Pivot
Application:
- For 4 1/2” (114 mm) wide hinges
- Handed (Specify when ordering)
THRESHOLDS
Fire Rated
Handicap Accessible
Catalog Number: S2O4A
Description: S24OA - Mill Aluminum Saddle Threshold, 1/2” x 4”
Available up to 7” wide
Fire Rated
Handicap Accessible
Catalog Number: S404A
Description: S4O4A - Mill Aluminum Saddle Threshold, 1/4” x 4”
Available up to 8” wide
Fire Rated
Handicap Accessible
Catalog Number: S407A
Description: S47OA - Mill Aluminum, Half Saddle Threshold, 1/2” x 2”
Available in 2” - 2 7/16” - 3” - 4” - 5”
3 1/2”
800-36
Oak Mini-Threshold
#30KMT-36’
3/4 x 1-11/16
3 1/2”
Phone: (612) 729-4003
801V-36
[email protected]
page 37
Fax: (612) 729-4216
SWEEPS
1-1/8”
967C and 967D
Anodized Clear and Anodized Brown
Aluminum Door Sweep
Weatherstrip Brush Insert, 2-1/16” x 3/8”
15/16”
RE
RE
RE
RE
Part Number - 967C and 967D
967C-36”
Door Sweep
967C-42”
Door Sweep
967D-36”
Door Sweep
967D-42”
Door Sweep
806C and 806D
Anodized Clear and Anodized Brown
Aluminum Door Sweep Weatherstrip
Vinyl Insert, 1-3/4” x 1/4”
RE
RE
RE
RE
1-3/4”
Part Number - 806C and 806D
806C-36”
Door Sweep Vinyl
806C-42”
Door Sweep Vinyl
806D-36”
Door Sweep Vinyl
806D-42”
Door Sweep Vinyl
Vinyl
• durable vinyl door bottom
• soft vinyl ﬁns
• seals top of threshold and sill
• great for steel doors
• ﬁts most 1 3/4” doors
U-Shaped Door Bottom w/Vinyl Fins
MD05991 36” Brown
MD06528 36” White
17/32”
#DSW28
#DSW30
#DSW36
2-8 Wood Door Sweep
3-0 Wood Door Sweep
3-6 Wood Door Sweep
5/16”
#DSR30
3-0 Replacement Sweep
Phone: (612) 729-4003
[email protected]
page 38
Fax: (612) 729-4216
METAL KICKPLATES
Select Finish
US
Code
BHMA
Aluminum Clear Anodized
US28
628
18
.050
48"
48"
8” x 34”, 10” x 34”, 12” x 34”
Antique Brass
US5
609
18
.050
48"
48"
--
Polished Brass
US3
605
18
.050
40"
48"
8” x 34”, 10” x 34”, 12” x 34”
Satin Brass
US4
606
18
.050
48"
48"
--
Polished Bronze
Max.
Max.
Height Width
Gauge Thickness
Stock
Sizes
Standard
Sizes
72 Hour
Quick Ship
US9
611
18
.050
48"
48"
--
Oil-Rubbed Bronze
US10B
613
18
.050
48"
48"
8” x 34”, 10” x 34”
Satin Bronze
US10
612
18
.050
48"
48"
8” x 34”, 10” x 34”, 12” x 34”
Polished Chrome
US26
625
18
.050
24"
48"
--
Satin Chrome
US26D
626
18
.050
24"
48"
--
Satin Stainless Steel
US32D
630
18
.050
48"
48"
8” x 34”, 10” x 34”, 12” x 34”
Polished Stainless Steel
US32
629
18
.050
48"
48"
--
666
19
.040
48"
48"
--
Alum. Bright. Brass Look

Width of Plates:
:

Push Side: 2" less than door width.
Pull Side: 1-1/2" less than door width.

Kydex® Kick Plates
Kydex®is an extremely durable, fire-retardant, acrylic/PVC alloy. TheKydex® sheet is widely used in
areas subject to high traffic and abuse where the exceptional impact, gouge and scratch resistance of a
Kydex® surface minimizes damage and related maintenance costs. Kydex® features excellent cleanability
and chemical resistance, which provide maximum protection from stains and graffiti. Kydex® is available
in 33 colors. Standard colors are black, gray, brown, or beige. Other colors are special order.
PUSH PLATES
Kydex®
Finish
Kydex®
Thickness
Min. Height
Max. Height
Min. Width
Max. Width
.060, .080,
.125
4"
48"
22"
96"
Square Round
Corner Corner
Click here to view the Kydex® standard color chart (Adobe Acrobat PDF)
Metal Finishes
Size
3" x 12"
200A
210A
3" x 15" 200D/300D 210D/310D
4" x 16"
200F/300F 210F/310F
6" x 16"
200H/300H 210H/310H
7" x 15" 200J/300J 210J/310J
8" x 16"
200K/300K 210K/300K
Aluminum-US28
Antique Brass-US5
Polished Brass-US3
Satin Brass-US4
Polished Bronze-US9
Oil-Rubbed BronzeUS10B
Satin Bronze-US10
Polished Chrome-US26
Satin Chrome-US26D
Satin Stainless SteelUS32D
Polished Stainless
Steel-US32
200
300
Series
200 Series
300 Series
Metal
.050 Thickness Metal(16 ga. B & S)
.125 Thickness Metal(8 ga. B & S)
Phone: (612) 729-4003
ANSI#
J301
J304
[email protected]
page 39
Fax: (612) 729-4216
210
310
PULL PLATES
Plate Size
3 1/2” x 15”
200D x 523B
200D x 559A
200D x 580
200D x 5P
Metal Finishes
• Aluminum-US28
• Antique Brass-US5
• Polished Brass-US3
• Satin Brass-US4
• Polished Bronze-US9
• Oil-Rubbed Bronze-US10B
• Satin Bronze-US10
• Polished Chrome-US26
275D
• Satin Chrome-US26D
• Satin Stainless Steel-US32D
Description:
• Polished Stainless Steel-US32
DOOR VIEWERS
1755
1755
Description:
1756
Application:
Application:
275D
Description: 160º Door Viewer
Application: For doors up to 2 1/8” (54 mm) thick, adjustable
Notes: Requires 1/2” (12.5 mm) hole for viewer.
Available in US3 • US4 • US5 • US15 • US26 • US26D
Description:
Application:
Description: 200º Door Viewer
Application: For doors up to 2 1/8” (54 mm) thick, adjustable
Notes: Requires 9/16” (14.3 mm) hole for viewer.
Available in US3 • US4 • US5 • US15 • US26 • US26D
1756
Description:
DV90
Application:
Brass Door Viewer, 160°, 1/2” Bore,
Plastic Lens, For Doors 1 3/8” To 2” Thick
Available in US3 • US5 • US10B • US15 • US26 • US26D
DJ BF-161-BP
Brass Plated
• Covers up to 2 ⅛” hole
DJ BF-161-PC
DJ BF-161-SL
2 ⅝” Diameter
Silver Coated
BF-161
8715
Swing Bar Door Guard
For Wood or Metal Doors.
8707-PB
Prime Coat
275D
8707-PB
Chain Door Guard
For Wood or Metal Door
with Extra Long Screws.
(Carded)
8708
Keyed Chain Door Guard
Locks from Inside or Outside,
Description:
for Wood or Metal Doors with
Extra Long Screws.
(Carded) KA Key #601-610
Application:
SURFACE BOLT
Length: #275D = 8” or #276D = 12”
Height X Width: 1/4” x 3/4” (6 mm x 19 mm)
Throw: 1” (25 mm)
Material: Steel
275D
Phone: (612) 729-4003
Description:
[email protected]
page 40
Fax: (612) 729-4216
DOOR STOPS
HDFDSH66
CFS20
Base Diameter: 2 1/4”
Projection: 3 5/8”
Keeper: 13/16” x 1 1/2”
Overall Height: 3”
268S
267S
Description:
Description:
HDWDS99
256S
Keeper: 13/16” x 1 1/2”
Diameter: 2 7/16”
256S
255S
Description:
Application:
CWS18
Application:
Application:
Description:
Description:
WB26
CONWB42
Application:
Application:
Diameter: 2 1/2”
Diameter: 2 1/2”
236W
232W
Description:
Description:
Application:
BL241F
DSLP4
DH25
Application:
Diameter: 1 3/4”
Base Thickness: 1/8”
Overall Height: 1”
Arm Length: 4”
208
Description:
HP95
n:
riptio
Desc
Application:
HDFS3
Stop Length: 3”
BL6212
211
Description:
Description:
SBRS3
Stop Length: 3”
Available in US3 • US10B • US15 • US26 • US26D
Phone: (612) 729-4003
[email protected]
page 41
Fax: (612) 729-4216
DOOR ACCESSORIES
CRL
Sex Bolt
Sex Bolt
SetsSets
Metal Frame Mounted
Silencer J4566
1/2"
Per Pack
•FourFour
Per Pack
Part #
CAT. NO.
DCSBA
DCSBA
DCSBBRZ
Finish
FINISH
Aluminum
Aluminum
Dark BRonze
Dark Bronze
DCSBBRZ
1/8"
WALL PROTECTORS
Made of high impact material
that can be painted or papered.
Use to repair larger areas of wall
damage. Foam adhesive on back
absorbs shock. 1/4" Total thickness. Washable.
Part #
19-181
19-181OW
Part #
19-182
3” Diameter
Finish
White
Off White
5” Diameter
Finish
White
COR7G - 7” Projection
IV COR7G-US26D
• Use on pairs of doors with astragal on active door up to 4’.
• With astragal, inactive door up to 3’4”.
• With astragals, both doors up to 2’10”.
IV COR9G-US26D
• Use on pairs of doors with astragal on active door over 4’.
• With astragal, inactive door over 3’4”.
• With astragals, both doors over 2’10”.
COR9G - 9” Projection
FB31P Pair - Top and Bottom Bolts / Automatic Flush Bolts – Metal Doors
IV FB31P-US32D
458
FB31P
• Both bolts are nonhanded, but are not identical. The top bolt has no spring
tension, resulting in lower actuation force with a smoother operation.
• Body Size: 1” Wide x 6-3/4” Long x 2” Deep
• UL Listed 3 hours on 8’0” x 10’0” Opening
FB458 - Top or Bottom Bolt / Manual Flush Bolt – Metal Doors
• Simplified installation in metal frames. Round bolt head requires only a
punched hole. Use of strike optional. Special design of guide and flat sided
bolt tip to prevent bolt rotation.
• Body Size: 1” Wide x 6-3/4” Long x 1-1/8” Deep
• UL Listed 3 hours on 8’0” x 10’0” Opening
Z
IV FB458-US26D
new
Multi-Function 10 Series Surface
Mount Overhead Stops and Holders
• Surface Mounted for New or Retrofit Installations
FEATURES AND SPECIFICATIONS
• Non-Handed – Slide Track Design
• Multi-Function Slider for Field Selection of Hold Open,
Friction Stay or Stop Only
• Degree of Opening Fully Adjustable – 110 Degree
Maximum Opening
• Heavy Shock Absorber Spring Provides 5 to 7 Degree
Compression Before Reaching a Dead-Stop
• Non-Metal Slide and Shock Block
• Furnished With Fasteners for Both Wood or Metal Door
and Frame
• Recommended for Medium Traffic, Medium Weight Doors
Optional Mounting
Bracket
CAT. NO.
5258
CAT. NO.
DOOR OPENING TYPE
OFFSET PIVOTS/HINGES
CENTER-HUNG PIVOTS
30-1/16" to 36"
(764 to 914 mm)
32-1/16" to 38"
(814 to 965 mm)
Satin Stainless
Painted Aluminum
Painted Dark Bronze
10446SS
10446SA
10446DU
36-1/16" to 42"
(916 to 1067 mm)
38-1/16" to 45"
(967 to 1143 mm)
Satin Stainless
Painted Aluminum
Painted Dark Bronze
10546SS
10546SA
10546DU
42-1/16" to 48"
(1068 to 1219 mm)
45-1/16" to 48"
(1145 to 1219 mm)
Satin Stainless
Painted Aluminum
Painted Dark Bronze
NOTE: Standard 10 Series Overhead Stops and Holders are shipped for Push Side Mounting.
For Pull Side Mounting, Order Cat. No. 5258 Optional Mounting Bracket.
Phone: (612) 729-4003
FINISH
10346SS
10346SA
10346DU
[email protected]
page 42
Fax: (612) 729-4216
DOOR CLOSERS
NORTON
.UMBERIE(
0!2!,,%,!2-
./ "#
./ "#
.OTE&ORCORNERBRACKETINSTALLATIONSEE
SIZINGFORPARALLELARM3IZINGINFORMATION
GIVENABOVEISBASEDONINSTALLATIONOF
STANDARDWEIGHTDOORSUNDERNORMALCONDITIONS
7ITH#OVER3PECIFY
$UETOMOUNTINGCONDITIONSREGULARARMWILL
OPENTOAPPROXDEGREESONLYTOPJAMB
WILLOPENTO
-AX$OOR3IZE
7OODOR-ETAL
&).)3(%3
!,5-
3%2)%3
$52/
!$*534!",%
2%'5,!2
"!22)%2&2%%
./
./"&
./
./"&
)N
3WING
g
g
g
g
g
g
g
g
g
.ONCRITICALINDEPENDENTVALVESALLOWPRECISIONADJUST
MENTOFSWEEPSPEEDLATCHINGSPEEDDELAYEDACTION
ORBACKCHECK4HESAMEEASYTURNHEXKEYADJUST
MENTALLOWSYOUTOINCREASEORDECREASETHESPRING
POWERTOSUITTHEOPENING
/PENING4O
DEGREES
2EG!RM
/UT
3WING
TODEGREE
&USIBLE,INK
(OLDER!RM
3TANDARD
-OUNT
g
g
g
g
g
(
0
-IN4OP2AIL
(&,
&%!452%3
s
s
s
s
-ULTI3IZE0OWER4HECLOSERSPRING
ASSEMBLYCANBEADJUSTEDTHROUGHA
WIDEPOWERRANGE!NADJUSTMENTSHAFT
ACCEPTSA(EXWRENCH
4WO0OWER2ANGES%ACHSERIESCANBE
ADJUSTEDTHROUGHARANGEOFSIZES
3ERIES.ORMAL0OWER2ANGE#LOSERS
SIZESTHRU3ERIES"&!CCESSIBILITY
#ODE#LOSERSSIZESTHRU
.ON(ANDED)NSTALLEDONEITHERRIGHTORLEFT
HANDDOORSFORALLAPPLICATIONS
!DJUSTABLE3WEEP3PEED!NINDEPENDENT
REGULATINGVALVEHEXKEYOPERATEDPERMITS
ADJUSTMENTOFTHEGENERALCLOSINGSPEED
$IMENSIONAL)NFORMATION
4567
!PPROX
3HIPPING
7EIGHT
s
s
!DJUSTABLE,ATCH3PEED!NINDEPENDENT
REGULATINGVALVEHEXKEYOPERATEDPERMITS
ADJUSTMENTOFTHEDOORgSSPEEDFORAPPROX
IMATELYTHELAST OFTHECLOSINGCYCLE
!DJUSTABLE"ACKCHECK#USHIONING!N
INDEPENDENTREGULATINGVALVEHEXKEY
OPERATEDPROVIDESANADJUSTABLEHYDRAULIC
CUSHIONTOTHEDOOROPENINGSPEEDTOWARD
THEENDOFTHEOPENINGCYCLE
s
/04)/.
!DJUSTABLE$ELAYED!CTION!VAILABLEIN
PLACEOFBACKCHECK!DDSATHIRDCLOSING
SPEEDRANGEATTHEBEGINNINGOFTHEDOORgS
CLOSINGCYCLE
3%2)%3!##%33/2)%3
#/2.%2"2!#+%43
(INGE
OR0IVOT
./
!2-3
./ 2EGULAR
./ 2EGULAR
./ 0ARALLEL(OLD/PEN!RM#OMPLETE
&).)3(%3
!,5-
$52/
$2/00,!4%3
$2/00,!4%3
2/$3(/%
./ &OR2EG!RM!,
./!
,ONG!RM!,
NO
./ s 4HE PLACES THE
CENTERLINE OF THE ARM
MOUNTING SCREWS FROMTHETOPOFTHEDOOR
s 4HE PLACES THE
319009 CENTERLINE OF THE ARM
MOUNTING SCREWS FROMTHETOPOFTHEDOOR
Phone: (612) 729-4003
./ ./
3/&&)40,!4%3
./ ./!
./!
3TANDARD)NSTALLATION!3OFlT0LATE4HIS
SOFlTPLATEISSUPPLIEDSTANDARDWITHMOSTNONHOLD
OPENCLOSERSTOPERMITPARALLELARMMOUNTING)TCANBE
MOUNTEDWHERETHEFRAMESOFlTISASNARROWAS
[email protected]
page 43
Fax: (612) 729-4216
y
4OGETHERTHESEFEATURESHELPACHIEVETHEOPENING
FORCEREGUIREMENTSOFTHE!MERICANWITH$ISABILITIES
!CT!$!!.3).ATIONAL(ANDICAPPED#ODES
ASWELLASTHEINDUSTRYgSMOSTDEMANDINGPERFORMANCE
CRITERIA!.3)'RADE
7
5
y
.ORTON3ERIES"&DOORCLOSERSCOMBINE
RUGGEDDURABILITYOPTIMUMCONTROLOFSWINGINGDOORS
ANDACOMPLETERANGEOFSPRINGANDPOWERADJUSTMENT
(YDRAULICCONTROLANDSPRINGPOWERADJUSTMENTSARE
EASILYMADERIGHTATTHEDOOR
4
&OR
.ORTON.UMBEROF#LOSER2ECOMMENDED
%XTERIOR
)NTERIOR
6
0
DOOR CLOSERS
AMERICAN EAGLE
• Standard 3100 series closer shipped with regular arm, a shaft cover, and self reaming and tapping screws.
• Non-sized (1-5) cylinder is adjustable for interior doors to 4’6” and exterior doors to 3’6”.
• Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors.
• Mounts to most common commercial footprint (3/4” x 9 1/6”).
• Closer meets ADA requirements.
REGULAR ARM - RA Complete arm
assembly with stamped steel main
arm and flat form style arm and shoe
assembly. (#319003)**
PARALLEL ARM HO BRACKET - PAHO
Bracket used when mounting parallel
arm with hold open arm assembly.
(#319022)***
DROP PLATE - DP For top jamb mount
with limited overhead clearance or
to provide clearance for a surface
applied stop/holder. Can also be used
parallel arm with a narrow top door rail.
(#319009)
PARALLEL ARM BRACKET - PA Bracket
used when mounting parallel arm with
regular arm non-hold open assembly.
(#319001)**
7100 SERIES DOOR CLOSER
The American Eagle 7100 Series features a full rack and pinion construction,
heavy duty cast iron closer body, forged steel main arm and full architectural
cover. Hydraulic control is accomplished through separate hex key non-critical
sweep, latch and backcheck valve adjustments. A Backcheck positioning
valve provides consistent backcheck range on parallel arm applications.
Optional delayed action (in lieu of backcheck) is effective from maximum
opening to approximately 70 degrees. Closers are non-handed, suitable for
regular, top jamb and parallel arm applications and come with fasteners for
wood and metal doors and frames. Sex nuts and bolts are also furnished
standard. Spring adjustment is provided throughout a range of sizes 1-6 and is
capable of meeting barrier free force restrictions. All products carry a 25-year
manufacturer’s limited warranty. The 7100 performs to the requirements of
ANSI A156.4 Grade 1.
REGULAR ARM - RA Complete arm
assembly with stamped steel main
arm and flat form style arm and shoe
assembly. (#719003)**
PARALLEL ARM HO BRACKET - PA
Bracket used when mounting parallel
arm with regular arm non-hold open
assembly. (#7190001)***
PARALLEL ARM DROP PLATE - DPPA
For parallel arm mount with narrow top
door rail. (#719018)
Phone: (612) 729-4003
FULL PLASTIC COVER - FC Full plastic
cover, non-handed (#719006)
[email protected]
page 44
Fax: (612) 729-4216
DOOR CLOSERS
4040 SERIES
CLOSER MOUNTS
*HINGE (PULL) SIDE
TOP JAMB (PUSH SIDE)
PARALLEL ARM (PUSH SIDE)
The 4041 includes the LCN® FAST™
Power Adjust, a revolutionary visual
indicator for Spring Power Adjustment.
INSTALLATION ACCESSORIES
LCN 4040 SUPER SMOOTHEE® SERIES
FEATURES
A
The 4040 SUPER SMOOTHEE® is LCN’s
most flexible heavy duty closer designed
for institutional and other rugged high traffic
applications.
► Ten Million Cycles
► Cast Iron
► Forged Steel Main Arm
► Double Heat Treated Steel Pinion
► All Weather Fluid
►Non-Handed
► LCN® Fast™ Power Adjust
► Fast & Accurate Installation
► UL & ULC Listed
• Standard 4040 series closer shipped with
regular arm, standard plastic cover, and
self reaming and tapping screws.
• Non-sized cylinder is adjustable for interiorr
doors to 5’0” and exterior doors to 4’0”.
• Closer mounts hinge side, top jamb, and parallel
arm w/PA Shoe on either right or left swinging
doors.
• Closers to meet ADA requirements.
• UL and ULC listed for self-closing doors
without hold-open.
• Tested and certified under ANSI Standard
A156.4, grade one.
TABLE OF SIZES 4041 cylinder is adjustable from size 1 through size 6 and is shipped set
to size 3. Closing power of 4040 series closers may be adjusted 50%.
Indicates recommended range of
door width for closer size.
Exterior (And Vestibule) Door Width
24”
30"
36"
42"
48"
610mm 762mm 914mm 1067mm 1219mm
CORNER BRACKET, 4040-16
• For doors where top jamb or parallel arm
mounting cannot be used (consult factory).
PLATE, 4040-18
• Required for hinge side mount where top
rail is less than 3 3/4” (95 mm). Plate
requires minimum 2” (51 mm) minimum
top rail.
PLATE, 4040-18G
• Locates top jamb mounted closer flush
with top of head frame face in flush ceiling
condition. Plate requires 1 3/4” (44 mm)
minimum head frame.
PA
PLATE, 4040-18PA
• Required for parallel arm mounting where
top rail is less than 5 1/2” (140 mm),
measured from the stop. Plate requires 2” (51
mm) minimum top rail.
TJ
PLATE, 4040-18TJ
• Centers top jamb mounted closer vertically
y
on head frame where face is less than 3
1/2” (89 mm). Plate requires 1 3/4” (44 mm)
minimum head frame.
size 3 size 4 size 5 size 6
*4041
Minimum
Door
Width
Interior Door Width
24”
34"
38"
610mm 864mm 965mm
48"
54"
60"
1219mm 1372mm 1524mm
size 2 size 3 size 4 size 5 size 6
*4041
Minimum * Adjustable Size 1 thru 6.
Door
Width
4040 Door Closers and Installation Accessories
Part No.
Description
LC 4041-CUSH-ALUM
Closer-Adj / 1-6
Aluminum
LC 4041-CUSH-DKBRZ
Closer-Adj / 1-6
Dark Bronze
LC 4041-DEL-REG-ALUM
Closer-Adj/1-6 Delay Action
Aluminum
LC 4041-H-ALUM
Closer-Adj/1-6 Hold-open
Aluminum
LC 4041-H-DKBRZ
Dark Bronze
LC 4041-HCUSH-ALUM
Aluminum
LC 4041-HCUSH-DKBRZ
Dark Bronze
LC 4041-REG-ALUM
Closer-Adj / 1-6
Aluminum
LC 4041-REG-DKBRZ
Closer-Adj / 1-6
Dark Bronze
LC 4041-RW/PA-ALUM
Closer-Adj / 1-6
Aluminum
LC 4041-RW/PA-DKBRZ
Closer-Ext/Int Reduced Opening Force Dark Bronze
LC 4041-RW/PA-TBSRT-AL
Closer-Adj / 1-6 W/thru Blt
Aluminum
LC 4040-16-AL
Corner Bracket
Aluminum
LC 4040-18-AL
Pull Side or Top Jamb Mounting Plate
Aluminum
LC 4040-18-DKBRZ
Dark Bronze
LC 4040-18G-AL
Aluminum
LC 4040-18G-DKBRZ
Dark Bronze
LC 4040-18PA-AL
Parallel Arm Mounting Plate
Aluminum
LC 4040-18PA-DKBRZ
Parallel Arm Mounting Plate
Dark Bronze
LC 4040-18TJ-AL
Mounting Plate-Top Jamb (Push Side)
Aluminum
LC 4040-18TJ-DKBRZ
Mounting Plate-Top Jamb (Push Side)
Dark Bronze
LC 4040XP-CUSH-AL
XP Closer Adj / 1-6
Aluminum
LC 4040XP-CUSH-DKBRZ
XP Closer Adj / 1-6
Dark Bronze
LC 4040XP-RW/PA-AL
XP Closer Adj / 1-6
Aluminum
LC 4040XP-RW/PA-DKBRZ
XP Closer Adj / 1-6
Dark Bronze
Phone: (612) 729-4003
Finish
[email protected]
page 45
Fax: (612) 729-4216
CLOSER HARDWARE
4040 SERIES
DCSBA
4040-TB/MS
DCSBBRZ
62PA
PA SHOE, 4040-62PA
4040-TB/MS4EA
• Required for parallel arm mounting.
• Thru Bolt / Machine Screw
• Package of 4 each.
EXTRA DUTY ARM, 4040-3077EDA
CUSH SHOE SUPPORT, 4040-30
• Optional, non-handed parallel arm features
forged, solid steel main and forearm for
potentially abusive installations.
• Provides anchorage for fifth screw used
with CUSH arms, where reveal is less
than 3 1/16” (78 mm).
HOLD-OPEN EXTRA DUTY ARM,
4040-3049EDA
ROD & SHOE, 79
Includes 4040-83 / Length is 6 3/8” (162 mm)
LONG ROD & SHOE, 79LR
Includes 4040-83 / Length is 8 3/8” (213 mm).
ROD & SHOE, 4030-79
(Old Version)
BLADE STOP SPACER, 4040-61
• Required to lower parallel arm shoe to
clear 1/2” (13 mm) blade stop.
• Optional handed arm provides hold-open
function, adjustable at the shoe.
• Includes 4030-83 - Arm Screw
4040 Series Arms and Installation Accessories
Part No.
Description
LC 4040-3077EDA-AL
Extra Duty Arm
Aluminum
LC 4040-3049EDA-LH-AL
LH Hold-Open Extra Duty Arm
Aluminum
LC 4040-3049EDA-LH-DKBZ
LH Hold-Open Extra Duty Arm
Dark Bronze
LC 4040-3049EDA-RH-AL
RH Hold-Open Arm EDA
Aluminum
LC 4040-3049EDA-RH-DKBZ
RH Hold-Open Arm EDA
Dark Bronze
LC 4040-3049-AL
Hold-Open Arm
Aluminum
HOLD-OPEN ARM, 4040-3049
LC 4040-3049-DKBRZ
Hold-Open Arm
Dark Bronze
• Optional, non-handed arm mounts pull side
or top jamb with shallow reveal, hold-open
adjustable shoe.
LC 4040-3049CNS-AL
HCush Arm
Aluminum
LC 4040-3049CNS-DKBRZ
HCush Arm
Dark Bronze
LC 4040-3077-AL
Regular Arm
Aluminum
LC 4040-3077-DKBRZ
Regularr Arm
Dark Bronze
LC 4040-3077CNS-AL
Cush-N-Stop Arm
LC 4040-TB/MS4EA-AL
Thru Bolt/Machine Screw - Pkg. of 4 Each
Aluminum
LC 4040-TB/MS4EA-DKBRZ
Thru Bolt/Machine Screw - Pkg. of 4 Each
Dark Bronze
LC 4040-30-AL
Cush Shoe Support
Aluminum
LC 4040-30-DKBRZ
Cush Shoe Support
Dark Bronze
LC 4040-61-AL
Blade Stop Spacer
Aluminum
LC 4040-61-DKBRZ
Blade Stop Spacer
Dark Bronze
LC 4040-62PA-AL
Parallel Arm Shoe
Aluminum
LC 4040-62PA-DKBRZ
Parallel Arm Shoe
Dark Bronze
LC 4040-72-AL
Cover Standard Snap-on
Aluminum
LC 4040-72-DKBRZ
Cover Standard Snap-on
Dark Bronze
LC 4040-79-AL
Rod & Shoe
LC 4040-79LR-AL
Long Rod & Shoe
REGULAR ARM, 4040-3077
• Non-handed arm mounts pull side or top
jamb with shallow reveal.
Phone: (612) 729-4003
[email protected]
page 46
Fax: (612) 729-4216
Finish
Aluminum
Aluminum
Dark Bronze
DOOR CLOSERS
4110 SERIES
*PARALLEL ARM (PUSH SIDE) MOUNT
The 4111 includes the LCN® FAST™
Power Adjust, a revolutionary visual
indicator for Spring Power Adjustment.
*4110 HCUSH mount shown
ARMS
LCN 4110 SMOOTHEE® SERIES
FEATURES
A
The 4110 SMOOTHEE® is LCN’s best
performing heavy duty closer designed
specifically for institutional and other rugged
high traffic applications.
► Ten Million Cycles
► Cast Iron
► Extra Duty Forged Steel Arm Standard
► Double Heat Treated Steel Pinion
► All Weather Fluid
► LCN® Fast™ Power Adjust
► Fast & Accurate Installation
► Standard/optional custom powder coat finish.
► UL & ULC Listed
• Standard 4110 series closer shipped with
EXTRA DUTY arm, standard plastic cover,
4110-201 FIFTH SCREW SPACER and
self reaming and tapping screws.
• Sized cylinders adjustable for interior doors
to 5’0” and exterior doors to 4’0”.
• Non-sized cylinder adjustable for interior doors
to 4’6” and exterior doors to 3’6”.
• Closer mounts parallel arm, specify right or left
swinging door.
• 4111 cylinder meets ADA requirements.
• Tested and certified under ANSI Standard
A156.4, grade one.
TABLE OF SIZES Select closer based on width of door. The spring power of non-sized
4111 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3. Sized 4110
series cylinders available in size 2, 3, 4, 5, or 6. Closing power of all 4110 Series closers can
be increased 50%.
Indicates recommended range of
door width for closer size.
Exterior (And Vestibule) Door Width
Interior Door Width
28”
30"
36"
42"
48"
711mm 762mm 914mm 1067mm 1219mm
H-CUSH ARM 4110-3049CNS
size 3 size 4 size 5 size 6
*4111
Minimum
Door
* Adjustable Size 1 thru 5.
Width
function with templated stop/hold-open
points. Handle controls hold-open function.
HOLD-OPEN ARM, 4110-3049EDA
y
function, adjustable at shoe.
CUSH-N-STOP ARM, 4110-3077CNS
• Optional, handed parallel arm features
solid forged steel main arm and forearm
with built-in stop in soffit shoe.
y
INSTALLATION ACCESSORIES
18
PLATE, 4110-18
• Required for push side mount where top
rail is less than 5 1/8” (130 mm), measured
from the stop. Plate requires minimum 2”
(51 mm) minimum top rail.
28”
34"
38"
711mm 864mm 965mm
48"
54"
60"
1219mm 1372mm 1524mm
size 2 size 3 size 4 size 5 size 6
*4111
Minimum
Door
* Adjustable Size 1 thru 5.
Width
4110 Series Door Closers, Arms and Installation Accessories
Part No.
Description
LC 4111-CUSH-LH-ALUM
Closer-Non-Sized Adjust
Aluminum
LC 4111-CUSH-LH-DKBRZ
Dark Bronze
LC 4111-CUSH-RH-ALUM
Aluminum
LC 4111-CUSH-RH-DKBRZ
Dark Bronze
LC 4111-EDA-LH-ALUM
Aluminum
LC 4111-EDA-LH-DKBRZ
Dark Bronze
LC 4111-EDA-RH-ALUM
Aluminum
LC 4111-EDA-RH-DKBRZ
Dark Bronze
LC 4111-HCUSH-LH-ALUM
Aluminum
LC 4111-HCUSH-RH-ALUM
Aluminum
LC 4110-3049CNS-LH-AL
Left Hand Hold-Open Arm
Aluminum
LC 4110-3049CNS-RH-AL
Right Hand Hold-Open Arm
Aluminum
LC 4110-3049EDA-LH-AL
Arm-Hold Open (HEDA)
Aluminum
LC 4110-3049EDA-RH-AL
Arm-Hold Open (HEDA)
Aluminum
LC 4110-3077CNS-LH-AL
Left Hand Cush-N-Stop Arm
LC 4110-3077CNS-RH-AL
Right Hand Cush-N-Stop Arm
LC 4110-18-AL
Mounting Plate F/Closers Parallel Arm(Push Side)
LC 4110-18-DKBRZ
Mounting Plate F/Closers Parallel Arm(Push Side) Dark Bronze
LC 4110-18CUSH-AL
Mounting Plate F/Closers Parallel Arm(Push Side)
LC 4110-18CUSH-DKBRZ
Mounting Plate F/Closers Parallel Arm(Push Side) Dark Bronze
Phone: (612) 729-4003
Finish
Aluminum
Dark Bronze
Aluminum
Aluminum
[email protected]
page 47
Fax: (612) 729-4216
LATCH PROTECTORS
Product No.
Product
Carriage Bolt,
Washer & Cap Nut
DJ OLP-2650-DU
DJ OLP-2650-SL
DJ OLP-2651-DU
Description
Dimensions
• Available in 1 1/8” and 1 3/8” offset
• Polybagged
2⅝” x 6½” x 1⅛” Duro Coated
2⅝” x 6½” x 1⅛” Silver Coated
2⅝” x 6½” x 1⅜” Duro Coated
Rivet
DJ OLP-2651-SL
2⅝” x 6½” x 1⅜” Silver Coated
• Furnished with carriage bolts, washers &
acorn cap nuts for safety and strength
• Fits 2 3/4” and 2 3/8” backsets
• Product 9211 Polybagged
DJ LP-211-DU
DJ LP-211-SL
DJ 9211-DU
DJ 9211-SL
• For MORTISE LOCKS
• Solid steel pin prevents spreading of door
from frame
• Pin is welded on back leaving no visible
point of attack from outside
• Fits 2 3/4” and 2 3/8” backsets
• Polybagged
DJ PLP-211-DU
DJ PLP-211-SL
DJ PMLP-211-DU
DJ PMLP-211-SL
DJ LP-207-DU
DJ LP-207-SL
Finish
• Solid steel pin prevents spreading of door
from frame
• Pin is welded on back leaving no visible
point of attack from outside
• Polybagged
• Furnished with carriage bolts, washers &
acorn cap nuts for safety and strength
Phone: (612) 729-4003
3” x 11”
Duro Coated
3” x 11”
Silver Coated
3” x 11”
Duro Coated
3” x 11”
Silver Coated
3” x 11”
Duro Coated
3” x 11”
Silver Coated
3” x 11”
Duro Coated
3” x 11”
Silver Coated
2 ¾” x 7”
Duro Coated
2 ¾” x 7”
Silver Coated
[email protected]
page 48
Fax: (612) 729-4216
LATCH PROTECTORS
DJ ILP-206-BP
6”
Brass Plated
6”
Duro Coated
6”
Silver Coated
12”
Duro Coated
12”
Silver Coated
2 ⅝” x 7” x ⅛”
Duro Coated
2 ⅝” x 7” x ⅛”
Silver Coated
2 ⅝” x 7” x ⅛”
Duro Coated
2 ⅝” x 7” x ⅛”
Duro Coated
2 ⅝” x 7” x ⅛”
Silver Coated
2 ⅝” x 7” x ⅛”
Silver Coated
• 6” version for use with key-in-knob and
deadbolt locks
• 12” version for use with Mortise Locks,
Simplex 1000 series, Alarm Lock DL-2500,
DL-2700 & 3000, Card Access Systems, etc
DJ ILP-206-DU
DJ ILP-206-SL
DJ ILP-212-DU
DJ ILP-212-SL
Bolt
DJ LP-307-DU
DJ LP-307-SL
Rivet
DJ GLP-307-DU-LHR
Bolt
DJ GLP-307-DU-RHR
DJ GLP-307-SL-LHR
DJ GLP-307-SL-RHR
Rivet
• Reversible and fits over cylinder - lock
removal NOT required
• Hand carriage bolt and rivet supplied • No
specific tools required
• 3/8” offset
• Fits over cylinder - lock removal NOT
required
• Hand carriage bolt and rivet supplied
• No specific tools required
• 3/8” offset
• Center of cylinder hole is 2 1/2” from end
of plate
DJ LP-312
DJ LP-312
Latch Protector
Fits Adams Rite Lock for Outswing Doors.
Dimensions: 2 5/8” x 12” x 1/8”
Part Number
DJ LP-312-DU Duro Coated
DJ LP-312-SL Silver Coated
DJ NLP
Latch Protector
Narrow Commercial Type for Outswing Doors
Part Number
DJ NLP-206-DU 1 1/2”x6” Duro Coated
DJ NLP-206-SL 1 1/2”x6” Silver Coated
DJ NLP-210-DU 1 1/2”x10” Duro Coated
DJ NLP-210-SL 1 1/2”x10” Silver Coated
RH
Shown
Aluma Guard ADA
AG5-A
AG5-D
Part Number
Aluminum
Duranodic Powdercoat
• Finishes: Aluminum Powdercoat” (A) or
“Duranodic Powdercoat” (D)
• (L) Mounts on left side of door
• (R) Mounts on right side of door
MM
MM
MM
MM
Part Number
AG3L-A
Aluma-Guard Offset
AG3L-D
Aluma-Guard Offset
AG3R-A
Aluma-Guard Offset
AG3R-D
Aluma-Guard Offset
Phone: (612) 729-4003
6-7/8”
4-1/8”
AG1-A & AG1-D Aluma Guard
y
Aluma-Guard is designed to protect
aluminum framed, glass, store front doors.
The AG-5 is formed from cold rolled steel
that is 6-1/2” high, 3-1/2” wide & 7/64” thick.
Mounting is easy with one carriage bolt in the
top and a drive rivet in the bottom and can be
installed with the lock still in the door.
The distance from the top of the
plate to the center of the 7/8”
diameter cylinder hole is
2-7/8”. Models available for both
left and right hand mounting.
g
AG5-A & AG5-D Aluma Guard
• Heavy gauge steel “Aluma-Guard” is easily
installed with anchor pads and through bolts
without lock removal.
• Dimensions: 6-7/8” H x 4-1/8” W
• Finishes: Aluminum Powdercoat” (A) or
“Duranodic Powdercoat” (D)
[email protected]
page 49
j
of Armor on
Latch/Cylinder
of Out-Swinging
Aluminum Framed
Glass Doors.
Fax: (612) 729-4216
PATIO DOOR HARDWARE
Sliding Glass & Screen Door Keepers
Part #
12-214
12-214B
Finish
Chrome
Black
Part #
12-212
Mill Finish
Rite Screen
Part #
12-211
Chrome Plated
Narrow
Part #
12-255
“A”
5/16”
Mill Finish
Part #
12-304
Metal
Wright Products
Part #
12-287
Bayform
Flush Mount Handles For Patio Doors
Fit-All Flush Mount Handle Set
with Nite Lock
Handle Set without Key Cylinder
Part #
Finish
13-140
Chrome
13-140B
Black
13-140W
White
Handle Set with Key Cylinder
Part #
Finish
13-140K
Chrome
13-140BK
Black
13-140WK White
Both Handle Sets Include: Each of 5 Cam
Sizes (S,C,P,X,K), 2 Screws and Keeper
Fit-All Flush Mount Handle Set
without Nite Lock
Part #
Finish
13-192
Chrome
13-192B
Black
13-192W
White
Part #
Finish
13-192K
Chrome
13-192BK
Black
13-192W
White
Both Handle Sets Include: Each of 5 Cam
Sizes (S,C,P,X,K), 2 Screws and Keeper
7/8"
Part # Keyed
AG4501 No
AG4501K Yes
Finish
Black
Black
Qty / Pkg
1
1
7-3/8"
6-1/2"
Part #
Finish
900-21019 Black
900-21019C Chrome
With Nite Lock, “S” Cam and Keeper
Part #
13-175
Less Key Lock
Miller
Phone: (612) 729-4003
[email protected]
page 50
Fax: (612) 729-4216
PATIO DOOR HANDLES
Part# #
Part
Finish Finish
Chrome
with Wood
WoodHandle
Handle
13-259
13-259
Chrome with
Black with Wood Handle
13-259B Black
13-259B
with wood Handle
Part #
Part #
13-105
13-105
13-105B
13-105B
13-105W
13-105W
Part #
13-108
13-108
Woodwith
withChrome
Chrome Brackets
Wood
Brackets
Crossly
Crossly
11"
Finish
Finish
Chrome Chrome
Black
Black
White
White
Cast
DieDieCast
Part #
Finish
Part #
Finish
13-109
Chrome with
with Wood
Wood Handle
Handle
13-109 Chrome
13-109B
Black with
withWood
WoodHandle
Handle
13-109B Black
13-109W
with Wood
WoodHandle
Handle
13-109W White with
6-3/8"
2"
Part #
13-115
13-115B
Finish
Chrome with Wood Handle
Black with wood Handle
Part #
13-232
13-232B
Finish
Chrome with Wood Handle
Black with wood Handle
Heavy Duty Brackets
Capitol
Part #
C1220
Finish
Chrome
Qty / Pkg
1
Part #
900-11414
Handle Assembly
Black Die-Cast
Traco
1-1/2"
1"
1-13/16"
4-15/16"
4-15/16"
4-15/16"
4-15/16"
-1/4"
7-1/4"
7-1/4"
11"
KG
3/4"
KG
1
1
Part #
C1249
C1250
2-3/4"
11/16"
G
1
1
1
1
3/4"
3/4"
Finish
Aluminum
Black
Qty / Pkg
1
1
Part #
C1162
C1163
Finish
Aluminum
Bronze
Qty / Pkg
1
1
Part #
C1060
C1061
Finish
Aluminum
Black
Qty / Pkg
1
1
Part #
C1000
C1001
C1185
C1203
Phone: (612) 729-4003
[email protected]
page 51
Fax: (612) 729-4216
Finish
Aluminum
Black
Bronze
White
Qty / Pkg
1
1
1
1
PATIO DOOR HANDLES
1"
2-1/8"
4-15/16"
4-15/16"
1/4"
-1/4"
G
1
1
1
31/32"
Includes Fit-All Keeper Assy., Screws and
Black Outside Pull
7/8"
Plastic Outside Pull
Better Bilt
Part #
C1002
C1003
C1094
Keyed
No
No
Yes
Finish
Aluminum
Black
Black
Part #
C1004
C1007
C1191
Finish
Aluminum
Black
White
Part #
13-152
13-152B
Finish
Aluminum
Black
Part #
13-195
13-195A
13-195W
Finish
Black
Aluminum
White
16-126
Key Lock
with 12-240 Keeper
Handle Set with Plate
Part #
Finish
13-112
Aluminum w/Wood Handle
Handle Set without Key Lock
Part #
Finish
13-112X Aluminum w/Wood Handle
Handle Set with Plate and 16-126 Key
Part #
Finish
13-113
Aluminum w/Wood Handle
Handle Set with Key Lock
Finish
Aluminum w/Brown Handle
Handle Set without Key Lock
Part #
Finish
13-114
Aluminum w/Brown Handle
Part #
13-101
Part #
13-104
13-141
Finish
Aluminum
Black
Original Acorn Metal Handle Set
Base Plate Only. 900-8200
Part #
Finish
13-160 New Style
Aluminum
Peachtree
Part #
13-255
Finish
Black
Peachtree
Part #
13-108
Phone: (612) 729-4003
Finish
Black
Acorn
Handle Set without Cylinder
Part #
Finish
13-154
Black
13-154W White
13-154BZ Bronze
13-154-A Almond
Part #
Finish
13-154K
Black
13-154WK White
Metal with Wood Handle
Sash Controls
Part #
Finish
13-106X
Black
Part #
Finish
13-106KX Black
Acorn Replacement
[email protected]
page 52
Fax: (612) 729-4216
PATIO DOOR ROLLERS
1-1/4"
Part Part
# #
9-2589-258
9-258N
9-258N
Part #
9-238
9-238
Part Part
# #
9-2459-245
9-245N
9-245N
9-245SS
9-245SS
Wheel
Type
Wheel
Type
Steel Steel
NylonNylon
Daryl
Daryl
Wheel
Type
Wheel
Type
Steel Steel
NylonNylon
Stainless
StainlessSteel
Steel
Crossly
Crossly
Part #Part #
900-7662
900-7662
900-7662SS
900-7662SS
Wheel
Type
Wheel
Type
Steel Steel
Stainless
Steel
Stainless
Steel
Acorn
Acorn
1-1/8" ROLLERS
Part #
900-13579
900-13579
Part #
9-215
Max.
Max.Dimple
DimpleWidth
Width23/32"
23/32”
Arundel
Arundel
9-215
Acorn
Acorn
9-209
Part #
9-209A
Part #
9-209
Ador
AdorHi-Lite
Hi-Lite
Part #
Part #
9-200
9-200
9-200N
9-200N
Wheel Type
Wheel Type
Steel
Steel
Nylon
Part #Part #
9-331 9-331
9-331SS
9-331SS
Wheel
Type
Wheel
Type
Steel Steel
Stainless
Steel
Stainless
Steel
Pennco
Pennco
PartPart
# #
900-1318
900-13138
900-13138N
900-13138N
9-209A
Ador
AdorHi-Lite
Hi-Lite
Wheel
WheelType
Type
Steel Steel
NylonNylon
Look
Look
9-299
Part #
9-286
Part #
9-299
9-286
900-11663
9-272
Part #
Silverline
9-272
PartPart
# #
9-2669-266
9-266SS
9-266SS
Wheel
WheelType
Type
Steel Steel
StainlessSteel
Steel
Stainless
Peachtree
Peachtree
9-324
Part #
Max. Dimple
9-324Width 3/4"
Nylon
Max. Dimple Width 3/4”
If you do not see the part you need, please send a sample or call our service department.
Phone: (612) 729-4003
[email protected]
page 53
Fax: (612) 729-4216
PATIO DOOR ROLLERS
1-1/4"
1-1/2"
Part #
9-294
9-294
Part #
900-10098A
900-10098A
Part #
9-318
9-318
Jones
Jones
Part #Part #
Wheel
Type
Wheel
Type
9-392 9-392
Steel Steel
9-392SS
Stainless
Steel
Stainless
Steel
9-392SS
Max.Housing
Housing Thickness
Max.
Thickness3/4”
3/4"
Part Part
# #
Wheel
Type
Wheel
Type
9-338N
NylonNylon
9-338N
9-3389-338
Steel Steel
StainlessSteel
Steel
9-338SS
Stainless
9-338SS
MaximumWidth
WidthatatLocking
Locking Tangs
Maximum
Tangs7/8”
7/8"
Harcar
Harcar
PartPart
# #
Wheel
Type
Wheel
Type
9-3669-366
Steel Steel
9-366SS
Stainless
StainlessSteel
Steel
9-366SS
Max.Dimple
Dimple Width
Width 29/32”
Max.
29/32"
Max.Width
WidthatatLocking
Locking Tangs
Tangs 1”1"
Max.
Binnings / Pan Am
Binnings/Pan
Am
Part Part
# #
9-2559-255
9-255M
9-255M
Wheel
Type
Wheel
Type
NylonNylon
Steel Steel
Lumidor
Lumidor
Part Part
# #
9-2339-233
9-233N
9-233N
Part #
9-341
9-341
Lenahan
/ Daryl
Lenahan/Daryl
Part Part
# #
9-3049-304
9-304SS
9-304SS
Wheel
Type
Wheel
Type
Steel Steel
Stainless
StainlessSteel
Steel
Part Part
# #
Wheel
Type
Wheel
Type
9-2619-261
Steel Steel
9-261SS
Stainless
StainlessSteel
Steel
9-261SS
Control / Keller
Air Air
Control/Keller
PartPart
# #
Wheel
Type
Wheel
Type
900-11287
Steel Steel
900-11287
MaximumWidth
WidthatatLocking
Locking Tangs
Tangs 7/8”
Maximum
7/8"
Crown / Lawson
Crown/Lawson
Part #
Part #
9-235
9-235
9-211
9-211
Keller
Harcar
Keller
Wheel
Type
Wheel
Type
Steel Steel
NylonNylon
Stanley
Stanley
PartPart
# #
9-2209-220
9-2299-229
Harcar
Wheel
WheelType
Type
NylonNylon
Steel Steel
Part Part
# #
9-2019-201
Phone: (612) 729-4003
[email protected]
page 54
Fax: (612) 729-4216
Wheel
Type
Wheel
Type
Steel Steel
PATIO DOOR ROLLERS
1-11/16"
7/8"
1-1/4"
Part #
Part #
Part #
9-214
9-214
Binnings
Binnings
Part #
9-207N
9-207N
9-277
9-277
9-303
9-303
Arcadia
Arcadia
Atlas / Portalume
Atlas/Portalume
FlatRoller,
Roller,Die
Die Cast
Cast
Flat
1-1/2"
Part #
9-276
Part #
Part #
9-248 9-248
9-248SS
9-248SS
9-276
Wheel Type
Wheel Type
Steel Steel
Stainless
StainlessSteel
Steel
Part #
9-268
Part #
9-275
9-275
Die 9-268
Cast
Die Cast
Keller/Air
Keller / AirControl
Control
1-1/4"
Part # Part #
9-205 9-205
9-205P9-205P
Part #
9-231
9-231
Wheel
Type
Wheel
Type
Steel Steel
NylonNylon
Peachtree
Peachtree
Peachtree
Peachtree
1-5/16"
Part # Part #
9-252 9-252
9-252N9-252N
9-252SS
9-252SS
Wheel
Type
Wheel
Type
Steel Steel
NylonNylon
Stainless
StainlessSteel
Steel
Miller
Miller
Part # Part #
9-247 9-247
9-247N9-247N
9-247SS
9-247SS
Wheel
WheelType
Type
Steel Steel
NylonNylon
Stainless
StainlessSteel
Steel
Yale
Yale
Part # Part #
9-249 9-249
9-249SS
9-249SS
Wheel
Type
Wheel
Type
Steel Steel
Stainless
Steel
Stainless
Steel
Lawson
Lawson
1-1/2"
Part #
900-9582
DOR1000
Crossly
Part # Part #
9-237 9-237
9-237S 9-237S
9-237SS
9-237SS
Wheel
Type
Wheel
Type
Nylon Nylon
Steel Steel
Stainless
Steel
Stainless
Steel
Wallace
Wallace
Part # Part #
9-257 9-257
9-257N9-257N
Wheel
Type
Wheel
Type
Steel Steel
Nylon Nylon
Pan Am
Pan
Am
Phone: (612) 729-4003
[email protected]
page 55
Fax: (612) 729-4216
PATIO DOOR ROLLERS
1-1/2"
1-21/32"
Part # Part #
Wheel
Type
Wheel
Type
9-364 9-364
Nylon Nylon
9-364S 9-364S
Steel Steel
Max.
Tangs31/32”
31/32"
Max.Width
WidthatatLocking
Locking Tangs
Part #
Part #
Part #
9-240
9-240
9-370
9-370
Plametron
Plametron
Wallace/Lawson
Wallace / Lawson
900-22583
900-22583
Alcan/Noradex
Alcan / Noradex
Tandem Rollers
In Order by Wheel Diameter
1-11/16"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
g
3-1/8"
e
1-1/16"
1-1/4" O.D.
(5/16" Wide)
Part #
9-254SS
Part # Part #
Wheel
WheelType
Type
9-368SS
Stainless
StainlessSteel
Steel
9-368SS
Max.
HousingWidth
WidthatatLocking
Locking Tangs
Tangs == 7/8”
Max.
Housing
7/8"
Inner
HousingStainless
Stainless Steel
Inner
Housing
Steel
Thermalume
Thermalume
Part #
Part #
9-239
9-239
9-3129-312
QTY/PKG
B
1
Slot Width:
11/16"
13/16"
Part #
9-405A
Part #Wheel Type
9-405A Nylon
Acorn Steel
Part #
9-267
9-267S
9-254SS
Daryl/Plaza
Daryl / Plaza
QTY/PKG
RS
Part #Part #
900-19383
900-19383
900-19383N
900-19383N
900-19383SS
900-19383SS
D1917
Acorn
Wheel Type
Wheel Type
Steel
Steel
Stainless
SteelSteel
Stainless
(Housing and
and Wheels)
(Housing
Wheels)
Part #
Part #
9-239T
9-239T
9-310T
9-310T
9-312T9-312T
Wheel Type
Wheel Type
Steel
Steel
Nylon Nylon
Stainless
SteelSteel
Stainless
Wheel
Type Type
Wheel
Steel Steel
Nylon Nylon
Stainless
Stainless
Steel Steel
Part #
750-1273704
750-1273704
1-1/2"
PartPart
# #
9-313T
9-313T
9-316T
9-316T
9-346T
9-346T
Wheel
WheelType
Type
SteelSteel
Stainless Steel
Stainless
Steel
NylonNylon
Part #Part #
9-234 9-234
Wheel
Type
Wheel
Type
Steel Steel
Fleetwood
Fleetwood
Part #
750-1997061
750-1997061
PartPart
# #
9-280
9-280
9-280SS
9-280SS
Phone: (612) 729-4003
[email protected]
page 56
Fax: (612) 729-4216
Wheel
WheelType
Type
SteelSteel
Stainless Steel
Stainless
Steel
PATIO DOOR ROLLERS
9-325
Capitol
9-326
Capitol
Part #
900-17045
Part #
900-16155
Sugarcreek
Part #
900-13010
SWS Ind.
Part #
9-306
Capitol / Remington
Part #
9-218
Part #
9-273
Remington
Part #
9-325
Metal Industries /Capitol
Part #
900-16711
Part #
900-289
Part #
9-293
Part #
9-325
Capitol
9-292
Part #
9-292
9-289
Part #
900-10106
Nu-Air
Part #
9-289
Part #
900-10095
Betterbilt
Phone: (612) 729-4003
[email protected]
page 57
Part #
9-326
Capitol
Fax: (612) 729-4216
PATIO DOOR HARDWARE
Part
CC
DD
Part## AA BB
11-130
1/4” 3/8"
3/8” 5/16"
5/16”
11-130 1”1" 1/4"
Steelwith
withSteel
SteelBall
Ball Bearing
Bearing Hub,
Steel
Hub,
Nut & Bolt
Part
Part ## A A B B C C D D
11-116X 1-1/4”
1-1/4" 1/4”
1/4" 25/64”
25/64" 5/16”
5/16"
11-116X
Steelwith
withSteel
SteelBall
Ball Bearing
Bearing Hub
Steel
Hub
Part
Part ## A A BB C C D D
11-116
1-1/4” 1/4”
5/16”
1/4" 11/32”
11/32" 5/16"
11-116 1-1/4"
Steel
Bearing
Hub
Steelwith
withSteel
SteelBall
Ball
Bearing
Hub & Axle
Hub & Axle
Nut & Bolt
Part
Part ## A A BB C C D D
11-139
1-1/4” 1/4”
5/16”
1/4" 51/64”
51/64" 5/16"
11-139 1-1/4"
Steelwith
withSteel
SteelBall
Ball Bearing
Steel
BearingHub
Hub
Acorn
Acorn
Part
DD
Part## A A BB C C
11-111
1-15/32” 1/4”
11/32” 5/16"
5/16”
1/4" 11/32"
11-111 1-15/32"
Steel
with
Steel
Hub
Steel
with
SteelBall
BallBearing
Bearing Hub
Part
# # A A B B C C DD
Part
11-111SS
1-15/32”
1/4”1/4"11/32”
5/16”
1-15/32"
11/32" 5/16"
11-111SS
StainlessSteel
Steel
AllAll
Stainless
Available
in 38” & 50”
lengths
Part #
900-9068
Part #
900-14226
900-9068
900-14226
Peachtree
Peachtree
Peachtree
Peachtree
Charley-BAR
STOP
BURGLARS
Safety Lock
Makes Sliding Glass
Doors Jimmy-Proof!
NEW STEEL
SAFETY KEY
LOCK
BULK - 25 per carton
•
•
•
•
Key hangs neatly out of your way when not in use
Comes with all necessary hardware and instructions
Available in three lengths, three finishes and three packages
Mailing TUBE - 50 per carton
Anodized Aluminum construction allows it to be cut to fit
sold in carton qty only
any size door
• New security feature: Improved black plastic saddle now
Part #
Size
Finish
takes a key so that the bar cannot be raised from the outside
48"
Mill
16-108T
by wires or other devices
48"
Bronze
16-108TB
• New saddle keeps small children from opening the door
48"
White
16-108TW
from the inside
u
B
.035
Gauge
r
Doo
Stainless Steel
Patio
Carded - 10 per carton sold
in carton qty only
Part #
Size
Finish
16-108C
16-108CB
16-108CW
48"
48"
48"
Mill
PartPart
# # Length
Size
16-108
16-108 48” 48"
16-108B
16-108B 48” 48"
16-108W 48” 48"
16-108W
16-108-60 60” 60"
16-108-60
Finish
Finish
Mill Mill
Bronze
Bronze
White
White
Mill Mill
Poly Bagged - 50 per Box
Repair TracksBronze
Part #
White
16-108P
Size
48"
Finish
Mill
Patio Door Bumper
16-251
Part
Part# #
16-227B
16-227B
16-227W
16-227W
Finish
Finish
ish
Black
BlackFin k
White
White
Replacement Track Cover.
8' Lengths. Sold in multiples of 5
only. Heavy duty. Recommended for
tracks that are too corroded to use
16-115. Repairman's "first choice" in
door replacement track.
Part
# # Length
Part
Length Finish
Finish
16-217-6
6ft.
Anodized
6ft.
Anodized
16-217-6
16-217-8
Anodized
Anodized
16-217-8 8ft.8ft.
Glass Door Track Extrusions
Glass Door Track Extrusions
1/16” Thick x 15/16” Wide
1/16" Thick x 15/16" Wide
Part
# # Length
Part
Length Finish
Finish
16-219-6
6ft.
Anodized
6ft.
Anodized
16-219-6
16-219-8
Anodized
Anodized
16-219-8 8ft.8ft.
Screen Door Track Extrusions
Screen Door Track Extrusions
1/16” Thick x 15/16” Wide
1/16" Thick x 15/16" Wide.
Phone: (612) 729-4003
[email protected]
page 58
Fax: (612) 729-4216
HOLLOW CLOSET CORE DOOR HARDWARE
Bi-Fold Door Hardware
2903 Series - Stanley
Track
Only(AW)
- WHITE
Track Only
- White
or brown (A)
#BFT20A
#BFT26A
#BFT30A
#BFT40A
#BFT50A
#BFT60A
Hardware Package Only
2-0 Track (for 2 leafs)
#BFH2A
2-leaf hardware package
1825 Series - Johnson Hardware
Complete Sets - includes track and hardware package
#BFS20
#BFS26
#BFS30
#BFS40
#BFS50
#BFS60
Track Only - BROWN
2-0 Set
2-6 Set
3-0 Set
4-0 Set
5-0 Set
6-0 Set
#BFT20
#BFT26
#BFT30
#BFT40
#BFT50
#BFT60
Hardware Package Only
#BFH2
#BFH4
#1801 Top Pivot Guide
#1807 Bottom Pivot
#36 wood knob
#1811 Jamb Bracket
ByPass Door Hardware
3800 Series - Sterling Hardware
For 1-3/8" doors up to 50 lbs. per door
Complete Sets - includes track and 2-door hardware package
#BPS40
#BPS50
#BPS60
#BPS80
4-0 Set
5-0 Set
6-0 Set
8-0 Set
#BPH2
#BPG
3800 Series hardware bag
Bypass Door Guide
(specify 1-3/8" or 1-3/4")
Track Only- ZINC
#BPT40
#BPT50
#BPT60
#BPT80
4-0
5-0
6-0
8-0
2-door track
2-door track
2-door track
2-door track
Phone: (612) 729-4003
[email protected]
page 59
Fax: (612) 729-4216
#1808 Aligner
HOLLOW CORE CLOSET DOOR HARDWARE
Part #
8-300
8-300C
Part #
8-332
Brass Back Plate
Finish
Brass
Chrome
Die Cast
Part #
8-202
8-202AB
8-202C
Part #
900-793
Nylon, Tan
Flush
Part #
900-21054
3/8” Off set
900-21054S for Hanger w/ Screws
Part #
8-209-4
Metal with Nylon Posts.
Adjustable for 3/4”, 1”, 1-1/8”and
1-3/8” By-passing Doors
4 per pack with Screws
Finish
Brass
Antique Brass
Chrome
Die Cast
E-Z Roll
8-298
Part #
Plastic,
Brown
8-298
Plastic, Brown
Part #
900-790
900-790
Metal, Bright
Brass Finish
Metal,Mount
Bright Brass
Flush
EdgeFisnish
Pull
8-235
Part #
Wood, 8-235
Unfinished
Part #
8-301
8-301C
Wood, Unfinished
Finish
Brass
Chrome
Die Cast
Part #
900-43
Part #
3-190
1/4” Off set
E-Z Roll
900-43 Finish
Metal, Aluminum
Metal, Aluminum Finish
Flush Mount Edge Pull
Part #
3-152
1/4” Off set
Acme
Part #
3-153
1/2” Off set
Acme
Part #
900-21054
3/4” Off set
Part #
900-7798
3/8” Off set
Part #
8-318
Part #
8-330
Part #
8-231
Part #
8-294
Adjustable For 1-3/8” By-passing
Doors 2 pieces
E-Z Roll
Metal with Nylon Posts
Adjusts for Doors 3/4” - 1-3/8”
Metal w/Nylon Post. Wood Tone,
Nylon, Tan
Phone: (612) 729-4003
[email protected]
page 60
Fax: (612) 729-4216
CLOSET DOOR HARDWARE
Bypass Panel Doors
52010 Top Roller
Bypass Mirrored Doors
51010 Bottom Guide
51040 Bottom Roller
Ball Bearing Wheel
52030 Top Guide
16010 Bottom Track
2 1/2”
21010 Top Track
Fascia “J” Track
Available in 36” - 48” - 60” - 72” - 84” - 96” - 108” - 120” - 192”
1”
1/2”
Low Profile
Bifold Track 4411
88012 Hardware Packs
High Profile
Bifold Track 4412
Available bifold in 24” - 30” - 36” - 48” - 60” - 72”
-------------------- 3 Stock Frame Colors --------------------
Bright Gold
Satin Gold
Bright White
All bypass & bifold tracks available in 3 stock colors.
Phone: (612) 729-4003
[email protected]
page 61
Fax: (612) 729-4216
CLOSET DOOR HARDWARE
3-133
Part #
Part #
3-120
3 116A
Part #
Part #
3-122A
3-133
Part #
3-118A
3-116A
Part #
3-158A
Wardrobe Door
Top Guide
Wardrobe Door
Top Guide
1"
1-1/2"
Part #
3-121
Nylon Top Guide; stamped
steel snap-in housing for steel
framed doors.
1-1/2"
1"
CRL
Wardrobe
Wardrobe
DoorDoor
Top Guide
Nylon Top Guide; stamped
framed doors.
GUIDE
QTY/PKG
Guide
Qty/Pkg
N6791
Nylon
N6791
Nylon
Minimum order: 1 pack.
CAT. NO.
Part
#
2
2
N6821
2-1/4"
Wardrobe
DoorDoor
Roller
Assembly
CRL
Wardrobe
Roller
Assembly
Flat edge nylon non-ball
bearing roller; adjustable steel
housing; snap-in bracket for
steel framed doors.
GUIDE
QTY/PKG
Guide
Qty/Pkg
Nylon
N6821
Nylon
3-1/16"
2
2
15/16"
new
3-7/16"
Part #
1-7/16"
Steel snap-in design housing
with plastic guide head; used on
Acme doors.
3-7/16"
CAT. NO.
Part #
3-132
2-13/16"
CAT. NO.
Part
#
2-1/4"
GUIDE Qty/Pkg
QTY/PKG
Guide
N6890
Plastic
2
N6890
Plastic 2
Wardrobe
DoorDoor
CRL
Wardrobe
Roller Assembly
2-1/4"
Wardrobe
DoorDoor
CRL
Wardrobe
7/8" O.D.
Top Guide
Flat edge nylon roller.
Adjustable steel housing.
1-5/8"
Twin rubber guide rollers;
mounted horizontially on a stamped
framed doors.
2-1/2"
new
3-3/8"
1-3/4"
2-1/16"
1/4"
Part
CAT.
NO.#
Roller
ROLLER
N6790
N6790
Nylon
Nylon
Qty/Pkg
QTY/PKG
1
1
1-7/16" O.D.
PartNO.
#
CAT.
Roller
ROLLER Qty/Pkg
QTY/PKG
N6963
N693
Nylon
Nylon
1
7/16"
1-3/4"
1
1-1/2" O.D.
CAT. NO.
Part #
N6945
N6945
ROLLERS QTY/PKG
Roller
Qty/Pkg
Rubber
Rubber 2
2
Part #
2-92
2-92
Part #
8-213
Pivot
PivotGuide
Guide
Stanley
Stanley
Part #
8-217
Phone: (612) 729-4003
[email protected]
page 62
Fax: (612) 729-4216
2-1/8"
3/4” BIFOLD CLOSET DOOR HARDWARE
Phone: (612) 729-4003
[email protected]
page 63
Fax: (612) 729-4216
WEATHERSTRIPPING
Self Adhesive Weatherstripping
1/2”
3/8”
Polyprene
Silicone
1/4”
3/16”
de
de
797B
Black Polyprene Self Adhesive Weatherstrip
Length: 19 feet
Part #
797B-19
638CH
Charcoal Silicone Self Adhesive Weatherstrip
Length: 19 feet
Finish
Smoke Seal
Part #
638CH-19FT
• Reduces Air Infiltration
• Adhesive Backed for Super Fast Installation
• Works With Wood and Metal Door Frames
V-Seal
Weatherstrip
CRL V-Seal
Weatherstrip
Tape
• Self-Adhesive Tape
Seals Gaps Up to
3/8" (9.5 mm)
7/16"
(11.1 mm)
7/16" (11.1 mm)
This CRL V-Seal Weatherstrip
Tape Jamb
is a flexible, compressible
weatherstrip which seals against
i d
d
d i fil i
7/16"
(11.1 mm)
7/16"
(11.1 mm)
Black
White
Latch Side
Door
Jamb
Door
V-Seal
Finish
Smoke Seal
Finish
Clear
Roll Length
180’ (54.9 m)
Part #
PF114BL
PF114W
Door
Part #
P39C180
Finish
Black
White
Jamb
Head and Hinge Side
Door Jamb Dust Pads
• Adhesive Backing Allows
Press-On Installation
• Seals Door Corners
3/8"
(9.5 mm)
These Door Jamb Dust Pads are made of woven
pile on a polypropylene fin with a pressure-sensitive
adhesive backing. The Pad is applied to the door jamb
above the rubber threshold, which helps seal the door
corners against dirt and dust.
2"
(50.8 mm)
Part #
POP1W
POP1BL
1-1/16"
(26.9 mm)
Finish
White
Black
Q-Lon® Seal made of open-cell urethane foam core for strike jamb hinge sill corners.
Part#
PAD
Finish
Bronze
1-1/2” Lengths
1-1/2
Phone: (612) 729-4003
[email protected]
page 64
Fax: (612) 729-4216
WEATHERSTRIPPING
REPLACEMENT
WEATHERSTRIPPING
REPLACEMENT
WEATHERSTRIP
Pile Height
.170 (11/64)
.200 (13/64)
.230 (15/64)
.260 (17/64)
.290 (19/64)
.320 (21/64)
.350 (23/64)
.187 Backing Width
100 Ft. 500 Ft.
63-76
63-77
63-7
63-8
63-82
63-83
63-85
63-86
63-25
63-26
63-94
63-95
63-34
63-35
1000 Ft.
63-78
63-9
63-84
63-87
63-27
63-96
63-36
Pile Height
.170 (11/64)
.200 (13/64)
.230 (15/64)
.260 (17/64)
.290 (19/64)
.320 (21/64)
.350 (23/64)
.270 Backing Width
100 Ft. 500 Ft.
63-40
63-41
63-46
63-47
63-52
63-53
63-112 63-113
63-61
63-62
63-121 63-122
63-70
63-71
1000 Ft.
63-42
63-48
63-54
63-114
63-63
63-123
63-72
Additional Backing Sizes Available: .360, .430, .500
WEATHERSTRIPPING
WITHWEATHERSTRIP
ADHESIVE BACKING
ADHESIVE BACKED
63-49TP
100' Roll
63-51TP
1,000' Roll
.270 Backing Width
.220 Pile Height
63-55TP
100' Roll
63-57TP
1,000' Roll
.270 Backing Width
.250 Pile Height
Other Sizes Available Upon Request With Minimum Orders
ENTRASEAL
DOOR
ASTRAGAL SEALS
ASTRAGAL
WEATHERSTRIP
For commercial/entrance
including
wood
doors.
For
commercial entrancedoors,
doors,
including
wood
doors.
Designed with
in in
other
Astragals
Designed
with Unique
UniqueFeatures
Featuresnot
notAvailable
Available
other
Astragals.
63-500
Profile for Kawneer
Door Shown
• Increased pile density by 20% to give you a better seal and appearance. No unsightly
• Fin
is in the
center
of the loose.
pile for added support and also is in both pile rows for greater
knitting
string
to come
energy
effi
ciency.
• Fin is in the center of the pile for added support and also is in both pile rows for greater
• Standard
pile height - 1/4”
energy efficiency.
• 83 1/4” long
• Industrial strength yarn ultrasonically welded - Black
• Extruded aluminium shape vs. roll formed for better pile support and retention.
• Adjustable heavy duty resilient springs - not punched out of roll formed section - provides
more consistent tension and adjustability . Easier to work with - no sharp edges to cut you.
Press-n- slide to adjust for any length.
• Reduces service callbacks and complaints.
• Standard pile height -.480"
• Five 7' lengths per tube.
CRL
Finned
Weatherstrip
Finned
Weatherstrip
H
• Unique Center Fin Stops Air, Water,
and Dust From Infiltrating Joints
Around Windows and Doors
• Made to Replace Most Existing Pile
Weatherstrips
• Resists Mold, Mildew, and Corrosion
Part #
FS7716C
FS77163M
Pile Height (H)
.160 (4 mm)
.160 (4 mm)
Back Width (W)
.187 (4.7 mm)
.187 (4.7 mm)
Solid Barrier Fin
W
Roll Length
100’ (30.5 m)
3000’ (914.4 m)
Phone: (612) 729-4003
[email protected]
page 65
Fax: (612) 729-4216
WEATHERSTRIPPING
Silicone
SCREW APPLIED WEATHERSTRIP
7/8”
Mill Aluminum and Anodized Bronze
Weatherstrip Set; Round Silicone Insert
Part #
678A
678D
Dimensions
42” x 84” Weatherstrip Set
42” x 84” Weatherstrip Set
MAGNETIC
WEATHERSTRIP
REPLACEMENT
FOR DOORS
STEEL DOORS
MAGNETIC
WEATHERSTRIP
FOR STEEL
Metal door replacement set consists of magnetic and
compression pieces which fit into existing kerf
around the door frame. Seals completely against
drafts, dirt and moisture.
Set consists of:
1 pc. - 6’ 8” Magnetic Weather-strip
1 pc. - 3’ Magnetic Weather-strip
1 pc. - 6’ 8” Compression Weather-strip
Part #
63-215BZ
63-215W
Finish
Bronze
White
100’ Roll
Part #
Finish
63-181BZ
Bronze
63-181BG-82 Beige
63-181WH-82 White
Schlegel
Length
82”
82”
82”
Packed 6 Per Carton
Part #
Finish Length
63-283BZ Bronze 97”
Door Weatherseal
900-9000S White
900-9000SBG Beige
900-9000SBZ Bronze
Part #
Finish
900-9176B
Bronze
900-9176WH White
Fire Rating: UL Rated for up to
180 Minutes
• The Seal is Composed of a
Cellular Foam Core and is Clad in
an Embossed, Non-Vinyl, Painted
Resistant Liner.
• Cellular Core Stays Soft in
Low Temperatures
• One Profile Seals the Strike Side,
Hinge Side and Header while
Maintaining a Tight Seal.
• This Foam Door Seal is
Recommended for 1/8" (.125)
Kerf Width Applications.
• Foam Door Seal Comes in 82"
Lengths and Sold in Multiples of
10 Lengths.
• Sold in Multiples of 100'
• Recommended Kerf
Dimensions are .078 x 250.
• Right Barb Leg is Designed for
Easy and Fast Installation.
• Cleaning Fluids will not
Damage the Coating and Paint
will not Stick to it.
• Slip Coating Technology
Reduces Friction by 2/3 to
Permit Windows to be Sealed
Tightly While Operating Smoothly.
.300 Bulb Diameter
Part #
63-150BG
63-105W
63-150BL
Finish
Beige
White
Black
.250 Bulb Diameter
Part #
63-164
63-164W
63-164B
Finish
Beige
White
Black
Part #
Finish
900-10041 Tan
50’ Roll
Phone: (612) 729-4003
Part #
Finish
63-208-82BZ Bronze
Length
82”
[email protected]
page 66
Fax: (612) 729-4216
Part #
63-207
100’ Roll